1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * tw9910 Video Driver 4 * 5 * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org> 6 * 7 * Copyright (C) 2008 Renesas Solutions Corp. 8 * Kuninori Morimoto <morimoto.kuninori@renesas.com> 9 * 10 * Based on ov772x driver, 11 * 12 * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> 13 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> 14 * Copyright (C) 2008 Magnus Damm 15 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> 16 */ 17 18 #include <linux/clk.h> 19 #include <linux/delay.h> 20 #include <linux/gpio/consumer.h> 21 #include <linux/i2c.h> 22 #include <linux/init.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/slab.h> 26 #include <linux/v4l2-mediabus.h> 27 #include <linux/videodev2.h> 28 29 #include <media/i2c/tw9910.h> 30 #include <media/v4l2-subdev.h> 31 32 #define GET_ID(val) ((val & 0xF8) >> 3) 33 #define GET_REV(val) (val & 0x07) 34 35 /* 36 * register offset 37 */ 38 #define ID 0x00 /* Product ID Code Register */ 39 #define STATUS1 0x01 /* Chip Status Register I */ 40 #define INFORM 0x02 /* Input Format */ 41 #define OPFORM 0x03 /* Output Format Control Register */ 42 #define DLYCTR 0x04 /* Hysteresis and HSYNC Delay Control */ 43 #define OUTCTR1 0x05 /* Output Control I */ 44 #define ACNTL1 0x06 /* Analog Control Register 1 */ 45 #define CROP_HI 0x07 /* Cropping Register, High */ 46 #define VDELAY_LO 0x08 /* Vertical Delay Register, Low */ 47 #define VACTIVE_LO 0x09 /* Vertical Active Register, Low */ 48 #define HDELAY_LO 0x0A /* Horizontal Delay Register, Low */ 49 #define HACTIVE_LO 0x0B /* Horizontal Active Register, Low */ 50 #define CNTRL1 0x0C /* Control Register I */ 51 #define VSCALE_LO 0x0D /* Vertical Scaling Register, Low */ 52 #define SCALE_HI 0x0E /* Scaling Register, High */ 53 #define HSCALE_LO 0x0F /* Horizontal Scaling Register, Low */ 54 #define BRIGHT 0x10 /* BRIGHTNESS Control Register */ 55 #define CONTRAST 0x11 /* CONTRAST Control Register */ 56 #define SHARPNESS 0x12 /* SHARPNESS Control Register I */ 57 #define SAT_U 0x13 /* Chroma (U) Gain Register */ 58 #define SAT_V 0x14 /* Chroma (V) Gain Register */ 59 #define HUE 0x15 /* Hue Control Register */ 60 #define CORING1 0x17 61 #define CORING2 0x18 /* Coring and IF compensation */ 62 #define VBICNTL 0x19 /* VBI Control Register */ 63 #define ACNTL2 0x1A /* Analog Control 2 */ 64 #define OUTCTR2 0x1B /* Output Control 2 */ 65 #define SDT 0x1C /* Standard Selection */ 66 #define SDTR 0x1D /* Standard Recognition */ 67 #define TEST 0x1F /* Test Control Register */ 68 #define CLMPG 0x20 /* Clamping Gain */ 69 #define IAGC 0x21 /* Individual AGC Gain */ 70 #define AGCGAIN 0x22 /* AGC Gain */ 71 #define PEAKWT 0x23 /* White Peak Threshold */ 72 #define CLMPL 0x24 /* Clamp level */ 73 #define SYNCT 0x25 /* Sync Amplitude */ 74 #define MISSCNT 0x26 /* Sync Miss Count Register */ 75 #define PCLAMP 0x27 /* Clamp Position Register */ 76 #define VCNTL1 0x28 /* Vertical Control I */ 77 #define VCNTL2 0x29 /* Vertical Control II */ 78 #define CKILL 0x2A /* Color Killer Level Control */ 79 #define COMB 0x2B /* Comb Filter Control */ 80 #define LDLY 0x2C /* Luma Delay and H Filter Control */ 81 #define MISC1 0x2D /* Miscellaneous Control I */ 82 #define LOOP 0x2E /* LOOP Control Register */ 83 #define MISC2 0x2F /* Miscellaneous Control II */ 84 #define MVSN 0x30 /* Macrovision Detection */ 85 #define STATUS2 0x31 /* Chip STATUS II */ 86 #define HFREF 0x32 /* H monitor */ 87 #define CLMD 0x33 /* CLAMP MODE */ 88 #define IDCNTL 0x34 /* ID Detection Control */ 89 #define CLCNTL1 0x35 /* Clamp Control I */ 90 #define ANAPLLCTL 0x4C 91 #define VBIMIN 0x4D 92 #define HSLOWCTL 0x4E 93 #define WSS3 0x4F 94 #define FILLDATA 0x50 95 #define SDID 0x51 96 #define DID 0x52 97 #define WSS1 0x53 98 #define WSS2 0x54 99 #define VVBI 0x55 100 #define LCTL6 0x56 101 #define LCTL7 0x57 102 #define LCTL8 0x58 103 #define LCTL9 0x59 104 #define LCTL10 0x5A 105 #define LCTL11 0x5B 106 #define LCTL12 0x5C 107 #define LCTL13 0x5D 108 #define LCTL14 0x5E 109 #define LCTL15 0x5F 110 #define LCTL16 0x60 111 #define LCTL17 0x61 112 #define LCTL18 0x62 113 #define LCTL19 0x63 114 #define LCTL20 0x64 115 #define LCTL21 0x65 116 #define LCTL22 0x66 117 #define LCTL23 0x67 118 #define LCTL24 0x68 119 #define LCTL25 0x69 120 #define LCTL26 0x6A 121 #define HSBEGIN 0x6B 122 #define HSEND 0x6C 123 #define OVSDLY 0x6D 124 #define OVSEND 0x6E 125 #define VBIDELAY 0x6F 126 127 /* 128 * register detail 129 */ 130 131 /* INFORM */ 132 #define FC27_ON 0x40 /* 1 : Input crystal clock frequency is 27MHz */ 133 #define FC27_FF 0x00 /* 0 : Square pixel mode. */ 134 /* Must use 24.54MHz for 60Hz field rate */ 135 /* source or 29.5MHz for 50Hz field rate */ 136 #define IFSEL_S 0x10 /* 01 : S-video decoding */ 137 #define IFSEL_C 0x00 /* 00 : Composite video decoding */ 138 /* Y input video selection */ 139 #define YSEL_M0 0x00 /* 00 : Mux0 selected */ 140 #define YSEL_M1 0x04 /* 01 : Mux1 selected */ 141 #define YSEL_M2 0x08 /* 10 : Mux2 selected */ 142 #define YSEL_M3 0x10 /* 11 : Mux3 selected */ 143 144 /* OPFORM */ 145 #define MODE 0x80 /* 0 : CCIR601 compatible YCrCb 4:2:2 format */ 146 /* 1 : ITU-R-656 compatible data sequence format */ 147 #define LEN 0x40 /* 0 : 8-bit YCrCb 4:2:2 output format */ 148 /* 1 : 16-bit YCrCb 4:2:2 output format.*/ 149 #define LLCMODE 0x20 /* 1 : LLC output mode. */ 150 /* 0 : free-run output mode */ 151 #define AINC 0x10 /* Serial interface auto-indexing control */ 152 /* 0 : auto-increment */ 153 /* 1 : non-auto */ 154 #define VSCTL 0x08 /* 1 : Vertical out ctrl by DVALID */ 155 /* 0 : Vertical out ctrl by HACTIVE and DVALID */ 156 #define OEN_TRI_SEL_MASK 0x07 157 #define OEN_TRI_SEL_ALL_ON 0x00 /* Enable output for Rev0/Rev1 */ 158 #define OEN_TRI_SEL_ALL_OFF_r0 0x06 /* All tri-stated for Rev0 */ 159 #define OEN_TRI_SEL_ALL_OFF_r1 0x07 /* All tri-stated for Rev1 */ 160 161 /* OUTCTR1 */ 162 #define VSP_LO 0x00 /* 0 : VS pin output polarity is active low */ 163 #define VSP_HI 0x80 /* 1 : VS pin output polarity is active high. */ 164 /* VS pin output control */ 165 #define VSSL_VSYNC 0x00 /* 0 : VSYNC */ 166 #define VSSL_VACT 0x10 /* 1 : VACT */ 167 #define VSSL_FIELD 0x20 /* 2 : FIELD */ 168 #define VSSL_VVALID 0x30 /* 3 : VVALID */ 169 #define VSSL_ZERO 0x70 /* 7 : 0 */ 170 #define HSP_LOW 0x00 /* 0 : HS pin output polarity is active low */ 171 #define HSP_HI 0x08 /* 1 : HS pin output polarity is active high.*/ 172 /* HS pin output control */ 173 #define HSSL_HACT 0x00 /* 0 : HACT */ 174 #define HSSL_HSYNC 0x01 /* 1 : HSYNC */ 175 #define HSSL_DVALID 0x02 /* 2 : DVALID */ 176 #define HSSL_HLOCK 0x03 /* 3 : HLOCK */ 177 #define HSSL_ASYNCW 0x04 /* 4 : ASYNCW */ 178 #define HSSL_ZERO 0x07 /* 7 : 0 */ 179 180 /* ACNTL1 */ 181 #define SRESET 0x80 /* resets the device to its default state 182 * but all register content remain unchanged. 183 * This bit is self-resetting. 184 */ 185 #define ACNTL1_PDN_MASK 0x0e 186 #define CLK_PDN 0x08 /* system clock power down */ 187 #define Y_PDN 0x04 /* Luma ADC power down */ 188 #define C_PDN 0x02 /* Chroma ADC power down */ 189 190 /* ACNTL2 */ 191 #define ACNTL2_PDN_MASK 0x40 192 #define PLL_PDN 0x40 /* PLL power down */ 193 194 /* VBICNTL */ 195 196 /* RTSEL : control the real time signal output from the MPOUT pin */ 197 #define RTSEL_MASK 0x07 198 #define RTSEL_VLOSS 0x00 /* 0000 = Video loss */ 199 #define RTSEL_HLOCK 0x01 /* 0001 = H-lock */ 200 #define RTSEL_SLOCK 0x02 /* 0010 = S-lock */ 201 #define RTSEL_VLOCK 0x03 /* 0011 = V-lock */ 202 #define RTSEL_MONO 0x04 /* 0100 = MONO */ 203 #define RTSEL_DET50 0x05 /* 0101 = DET50 */ 204 #define RTSEL_FIELD 0x06 /* 0110 = FIELD */ 205 #define RTSEL_RTCO 0x07 /* 0111 = RTCO ( Real Time Control ) */ 206 207 /* HSYNC start and end are constant for now */ 208 #define HSYNC_START 0x0260 209 #define HSYNC_END 0x0300 210 211 /* 212 * structure 213 */ 214 215 struct regval_list { 216 unsigned char reg_num; 217 unsigned char value; 218 }; 219 220 struct tw9910_scale_ctrl { 221 char *name; 222 unsigned short width; 223 unsigned short height; 224 u16 hscale; 225 u16 vscale; 226 }; 227 228 struct tw9910_priv { 229 struct v4l2_subdev subdev; 230 struct clk *clk; 231 struct tw9910_video_info *info; 232 struct gpio_desc *pdn_gpio; 233 struct gpio_desc *rstb_gpio; 234 const struct tw9910_scale_ctrl *scale; 235 v4l2_std_id norm; 236 u32 revision; 237 }; 238 239 static const struct tw9910_scale_ctrl tw9910_ntsc_scales[] = { 240 { 241 .name = "NTSC SQ", 242 .width = 640, 243 .height = 480, 244 .hscale = 0x0100, 245 .vscale = 0x0100, 246 }, 247 { 248 .name = "NTSC CCIR601", 249 .width = 720, 250 .height = 480, 251 .hscale = 0x0100, 252 .vscale = 0x0100, 253 }, 254 { 255 .name = "NTSC SQ (CIF)", 256 .width = 320, 257 .height = 240, 258 .hscale = 0x0200, 259 .vscale = 0x0200, 260 }, 261 { 262 .name = "NTSC CCIR601 (CIF)", 263 .width = 360, 264 .height = 240, 265 .hscale = 0x0200, 266 .vscale = 0x0200, 267 }, 268 { 269 .name = "NTSC SQ (QCIF)", 270 .width = 160, 271 .height = 120, 272 .hscale = 0x0400, 273 .vscale = 0x0400, 274 }, 275 { 276 .name = "NTSC CCIR601 (QCIF)", 277 .width = 180, 278 .height = 120, 279 .hscale = 0x0400, 280 .vscale = 0x0400, 281 }, 282 }; 283 284 static const struct tw9910_scale_ctrl tw9910_pal_scales[] = { 285 { 286 .name = "PAL SQ", 287 .width = 768, 288 .height = 576, 289 .hscale = 0x0100, 290 .vscale = 0x0100, 291 }, 292 { 293 .name = "PAL CCIR601", 294 .width = 720, 295 .height = 576, 296 .hscale = 0x0100, 297 .vscale = 0x0100, 298 }, 299 { 300 .name = "PAL SQ (CIF)", 301 .width = 384, 302 .height = 288, 303 .hscale = 0x0200, 304 .vscale = 0x0200, 305 }, 306 { 307 .name = "PAL CCIR601 (CIF)", 308 .width = 360, 309 .height = 288, 310 .hscale = 0x0200, 311 .vscale = 0x0200, 312 }, 313 { 314 .name = "PAL SQ (QCIF)", 315 .width = 192, 316 .height = 144, 317 .hscale = 0x0400, 318 .vscale = 0x0400, 319 }, 320 { 321 .name = "PAL CCIR601 (QCIF)", 322 .width = 180, 323 .height = 144, 324 .hscale = 0x0400, 325 .vscale = 0x0400, 326 }, 327 }; 328 329 /* 330 * general function 331 */ 332 static struct tw9910_priv *to_tw9910(const struct i2c_client *client) 333 { 334 return container_of(i2c_get_clientdata(client), struct tw9910_priv, 335 subdev); 336 } 337 338 static int tw9910_mask_set(struct i2c_client *client, u8 command, 339 u8 mask, u8 set) 340 { 341 s32 val = i2c_smbus_read_byte_data(client, command); 342 343 if (val < 0) 344 return val; 345 346 val &= ~mask; 347 val |= set & mask; 348 349 return i2c_smbus_write_byte_data(client, command, val); 350 } 351 352 static int tw9910_set_scale(struct i2c_client *client, 353 const struct tw9910_scale_ctrl *scale) 354 { 355 int ret; 356 357 ret = i2c_smbus_write_byte_data(client, SCALE_HI, 358 (scale->vscale & 0x0F00) >> 4 | 359 (scale->hscale & 0x0F00) >> 8); 360 if (ret < 0) 361 return ret; 362 363 ret = i2c_smbus_write_byte_data(client, HSCALE_LO, 364 scale->hscale & 0x00FF); 365 if (ret < 0) 366 return ret; 367 368 ret = i2c_smbus_write_byte_data(client, VSCALE_LO, 369 scale->vscale & 0x00FF); 370 371 return ret; 372 } 373 374 static int tw9910_set_hsync(struct i2c_client *client) 375 { 376 struct tw9910_priv *priv = to_tw9910(client); 377 int ret; 378 379 /* bit 10 - 3 */ 380 ret = i2c_smbus_write_byte_data(client, HSBEGIN, 381 (HSYNC_START & 0x07F8) >> 3); 382 if (ret < 0) 383 return ret; 384 385 /* bit 10 - 3 */ 386 ret = i2c_smbus_write_byte_data(client, HSEND, 387 (HSYNC_END & 0x07F8) >> 3); 388 if (ret < 0) 389 return ret; 390 391 /* So far only revisions 0 and 1 have been seen. */ 392 /* bit 2 - 0 */ 393 if (priv->revision == 1) 394 ret = tw9910_mask_set(client, HSLOWCTL, 0x77, 395 (HSYNC_START & 0x0007) << 4 | 396 (HSYNC_END & 0x0007)); 397 398 return ret; 399 } 400 401 static void tw9910_reset(struct i2c_client *client) 402 { 403 tw9910_mask_set(client, ACNTL1, SRESET, SRESET); 404 usleep_range(1000, 5000); 405 } 406 407 static int tw9910_power(struct i2c_client *client, int enable) 408 { 409 int ret; 410 u8 acntl1; 411 u8 acntl2; 412 413 if (enable) { 414 acntl1 = 0; 415 acntl2 = 0; 416 } else { 417 acntl1 = CLK_PDN | Y_PDN | C_PDN; 418 acntl2 = PLL_PDN; 419 } 420 421 ret = tw9910_mask_set(client, ACNTL1, ACNTL1_PDN_MASK, acntl1); 422 if (ret < 0) 423 return ret; 424 425 return tw9910_mask_set(client, ACNTL2, ACNTL2_PDN_MASK, acntl2); 426 } 427 428 static const struct tw9910_scale_ctrl *tw9910_select_norm(v4l2_std_id norm, 429 u32 width, u32 height) 430 { 431 const struct tw9910_scale_ctrl *scale; 432 const struct tw9910_scale_ctrl *ret = NULL; 433 __u32 diff = 0xffffffff, tmp; 434 int size, i; 435 436 if (norm & V4L2_STD_NTSC) { 437 scale = tw9910_ntsc_scales; 438 size = ARRAY_SIZE(tw9910_ntsc_scales); 439 } else if (norm & V4L2_STD_PAL) { 440 scale = tw9910_pal_scales; 441 size = ARRAY_SIZE(tw9910_pal_scales); 442 } else { 443 return NULL; 444 } 445 446 for (i = 0; i < size; i++) { 447 tmp = abs(width - scale[i].width) + 448 abs(height - scale[i].height); 449 if (tmp < diff) { 450 diff = tmp; 451 ret = scale + i; 452 } 453 } 454 455 return ret; 456 } 457 458 /* 459 * subdevice operations 460 */ 461 static int tw9910_s_stream(struct v4l2_subdev *sd, int enable) 462 { 463 struct i2c_client *client = v4l2_get_subdevdata(sd); 464 struct tw9910_priv *priv = to_tw9910(client); 465 u8 val; 466 int ret; 467 468 if (!enable) { 469 switch (priv->revision) { 470 case 0: 471 val = OEN_TRI_SEL_ALL_OFF_r0; 472 break; 473 case 1: 474 val = OEN_TRI_SEL_ALL_OFF_r1; 475 break; 476 default: 477 dev_err(&client->dev, "un-supported revision\n"); 478 return -EINVAL; 479 } 480 } else { 481 val = OEN_TRI_SEL_ALL_ON; 482 483 if (!priv->scale) { 484 dev_err(&client->dev, "norm select error\n"); 485 return -EPERM; 486 } 487 488 dev_dbg(&client->dev, "%s %dx%d\n", 489 priv->scale->name, 490 priv->scale->width, 491 priv->scale->height); 492 } 493 494 ret = tw9910_mask_set(client, OPFORM, OEN_TRI_SEL_MASK, val); 495 if (ret < 0) 496 return ret; 497 498 return tw9910_power(client, enable); 499 } 500 501 static int tw9910_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm) 502 { 503 struct i2c_client *client = v4l2_get_subdevdata(sd); 504 struct tw9910_priv *priv = to_tw9910(client); 505 506 *norm = priv->norm; 507 508 return 0; 509 } 510 511 static int tw9910_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) 512 { 513 struct i2c_client *client = v4l2_get_subdevdata(sd); 514 struct tw9910_priv *priv = to_tw9910(client); 515 const unsigned int hact = 720; 516 const unsigned int hdelay = 15; 517 unsigned int vact; 518 unsigned int vdelay; 519 int ret; 520 521 if (!(norm & (V4L2_STD_NTSC | V4L2_STD_PAL))) 522 return -EINVAL; 523 524 priv->norm = norm; 525 if (norm & V4L2_STD_525_60) { 526 vact = 240; 527 vdelay = 18; 528 ret = tw9910_mask_set(client, VVBI, 0x10, 0x10); 529 } else { 530 vact = 288; 531 vdelay = 24; 532 ret = tw9910_mask_set(client, VVBI, 0x10, 0x00); 533 } 534 if (!ret) 535 ret = i2c_smbus_write_byte_data(client, CROP_HI, 536 ((vdelay >> 2) & 0xc0) | 537 ((vact >> 4) & 0x30) | 538 ((hdelay >> 6) & 0x0c) | 539 ((hact >> 8) & 0x03)); 540 if (!ret) 541 ret = i2c_smbus_write_byte_data(client, VDELAY_LO, 542 vdelay & 0xff); 543 if (!ret) 544 ret = i2c_smbus_write_byte_data(client, VACTIVE_LO, 545 vact & 0xff); 546 547 return ret; 548 } 549 550 #ifdef CONFIG_VIDEO_ADV_DEBUG 551 static int tw9910_g_register(struct v4l2_subdev *sd, 552 struct v4l2_dbg_register *reg) 553 { 554 struct i2c_client *client = v4l2_get_subdevdata(sd); 555 int ret; 556 557 if (reg->reg > 0xff) 558 return -EINVAL; 559 560 reg->size = 1; 561 ret = i2c_smbus_read_byte_data(client, reg->reg); 562 if (ret < 0) 563 return ret; 564 565 /* 566 * ret = int 567 * reg->val = __u64 568 */ 569 reg->val = (__u64)ret; 570 571 return 0; 572 } 573 574 static int tw9910_s_register(struct v4l2_subdev *sd, 575 const struct v4l2_dbg_register *reg) 576 { 577 struct i2c_client *client = v4l2_get_subdevdata(sd); 578 579 if (reg->reg > 0xff || 580 reg->val > 0xff) 581 return -EINVAL; 582 583 return i2c_smbus_write_byte_data(client, reg->reg, reg->val); 584 } 585 #endif 586 587 static void tw9910_set_gpio_value(struct gpio_desc *desc, int value) 588 { 589 if (desc) { 590 gpiod_set_value(desc, value); 591 usleep_range(500, 1000); 592 } 593 } 594 595 static int tw9910_power_on(struct tw9910_priv *priv) 596 { 597 struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev); 598 int ret; 599 600 if (priv->clk) { 601 ret = clk_prepare_enable(priv->clk); 602 if (ret) 603 return ret; 604 } 605 606 tw9910_set_gpio_value(priv->pdn_gpio, 0); 607 608 /* 609 * FIXME: The reset signal is connected to a shared GPIO on some 610 * platforms (namely the SuperH Migo-R). Until a framework becomes 611 * available to handle this cleanly, request the GPIO temporarily 612 * to avoid conflicts. 613 */ 614 priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb", 615 GPIOD_OUT_LOW); 616 if (IS_ERR(priv->rstb_gpio)) { 617 dev_info(&client->dev, "Unable to get GPIO \"rstb\""); 618 clk_disable_unprepare(priv->clk); 619 tw9910_set_gpio_value(priv->pdn_gpio, 1); 620 return PTR_ERR(priv->rstb_gpio); 621 } 622 623 if (priv->rstb_gpio) { 624 tw9910_set_gpio_value(priv->rstb_gpio, 1); 625 tw9910_set_gpio_value(priv->rstb_gpio, 0); 626 627 gpiod_put(priv->rstb_gpio); 628 } 629 630 return 0; 631 } 632 633 static int tw9910_power_off(struct tw9910_priv *priv) 634 { 635 clk_disable_unprepare(priv->clk); 636 tw9910_set_gpio_value(priv->pdn_gpio, 1); 637 638 return 0; 639 } 640 641 static int tw9910_s_power(struct v4l2_subdev *sd, int on) 642 { 643 struct i2c_client *client = v4l2_get_subdevdata(sd); 644 struct tw9910_priv *priv = to_tw9910(client); 645 646 return on ? tw9910_power_on(priv) : tw9910_power_off(priv); 647 } 648 649 static int tw9910_set_frame(struct v4l2_subdev *sd, u32 *width, u32 *height) 650 { 651 struct i2c_client *client = v4l2_get_subdevdata(sd); 652 struct tw9910_priv *priv = to_tw9910(client); 653 int ret = -EINVAL; 654 u8 val; 655 656 /* Select suitable norm. */ 657 priv->scale = tw9910_select_norm(priv->norm, *width, *height); 658 if (!priv->scale) 659 goto tw9910_set_fmt_error; 660 661 /* Reset hardware. */ 662 tw9910_reset(client); 663 664 /* Set bus width. */ 665 val = 0x00; 666 if (priv->info->buswidth == 16) 667 val = LEN; 668 669 ret = tw9910_mask_set(client, OPFORM, LEN, val); 670 if (ret < 0) 671 goto tw9910_set_fmt_error; 672 673 /* Select MPOUT behavior. */ 674 switch (priv->info->mpout) { 675 case TW9910_MPO_VLOSS: 676 val = RTSEL_VLOSS; break; 677 case TW9910_MPO_HLOCK: 678 val = RTSEL_HLOCK; break; 679 case TW9910_MPO_SLOCK: 680 val = RTSEL_SLOCK; break; 681 case TW9910_MPO_VLOCK: 682 val = RTSEL_VLOCK; break; 683 case TW9910_MPO_MONO: 684 val = RTSEL_MONO; break; 685 case TW9910_MPO_DET50: 686 val = RTSEL_DET50; break; 687 case TW9910_MPO_FIELD: 688 val = RTSEL_FIELD; break; 689 case TW9910_MPO_RTCO: 690 val = RTSEL_RTCO; break; 691 default: 692 val = 0; 693 } 694 695 ret = tw9910_mask_set(client, VBICNTL, RTSEL_MASK, val); 696 if (ret < 0) 697 goto tw9910_set_fmt_error; 698 699 /* Set scale. */ 700 ret = tw9910_set_scale(client, priv->scale); 701 if (ret < 0) 702 goto tw9910_set_fmt_error; 703 704 /* Set hsync. */ 705 ret = tw9910_set_hsync(client); 706 if (ret < 0) 707 goto tw9910_set_fmt_error; 708 709 *width = priv->scale->width; 710 *height = priv->scale->height; 711 712 return ret; 713 714 tw9910_set_fmt_error: 715 716 tw9910_reset(client); 717 priv->scale = NULL; 718 719 return ret; 720 } 721 722 static int tw9910_get_selection(struct v4l2_subdev *sd, 723 struct v4l2_subdev_state *sd_state, 724 struct v4l2_subdev_selection *sel) 725 { 726 struct i2c_client *client = v4l2_get_subdevdata(sd); 727 struct tw9910_priv *priv = to_tw9910(client); 728 729 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 730 return -EINVAL; 731 /* Only CROP, CROP_DEFAULT and CROP_BOUNDS are supported. */ 732 if (sel->target > V4L2_SEL_TGT_CROP_BOUNDS) 733 return -EINVAL; 734 735 sel->r.left = 0; 736 sel->r.top = 0; 737 if (priv->norm & V4L2_STD_NTSC) { 738 sel->r.width = 640; 739 sel->r.height = 480; 740 } else { 741 sel->r.width = 768; 742 sel->r.height = 576; 743 } 744 745 return 0; 746 } 747 748 static int tw9910_get_fmt(struct v4l2_subdev *sd, 749 struct v4l2_subdev_state *sd_state, 750 struct v4l2_subdev_format *format) 751 { 752 struct v4l2_mbus_framefmt *mf = &format->format; 753 struct i2c_client *client = v4l2_get_subdevdata(sd); 754 struct tw9910_priv *priv = to_tw9910(client); 755 756 if (format->pad) 757 return -EINVAL; 758 759 if (!priv->scale) { 760 priv->scale = tw9910_select_norm(priv->norm, 640, 480); 761 if (!priv->scale) 762 return -EINVAL; 763 } 764 765 mf->width = priv->scale->width; 766 mf->height = priv->scale->height; 767 mf->code = MEDIA_BUS_FMT_UYVY8_2X8; 768 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 769 mf->field = V4L2_FIELD_INTERLACED_BT; 770 771 return 0; 772 } 773 774 static int tw9910_s_fmt(struct v4l2_subdev *sd, 775 struct v4l2_mbus_framefmt *mf) 776 { 777 u32 width = mf->width, height = mf->height; 778 int ret; 779 780 WARN_ON(mf->field != V4L2_FIELD_ANY && 781 mf->field != V4L2_FIELD_INTERLACED_BT); 782 783 /* Check color format. */ 784 if (mf->code != MEDIA_BUS_FMT_UYVY8_2X8) 785 return -EINVAL; 786 787 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 788 789 ret = tw9910_set_frame(sd, &width, &height); 790 if (ret) 791 return ret; 792 793 mf->width = width; 794 mf->height = height; 795 796 return 0; 797 } 798 799 static int tw9910_set_fmt(struct v4l2_subdev *sd, 800 struct v4l2_subdev_state *sd_state, 801 struct v4l2_subdev_format *format) 802 { 803 struct v4l2_mbus_framefmt *mf = &format->format; 804 struct i2c_client *client = v4l2_get_subdevdata(sd); 805 struct tw9910_priv *priv = to_tw9910(client); 806 const struct tw9910_scale_ctrl *scale; 807 808 if (format->pad) 809 return -EINVAL; 810 811 if (mf->field == V4L2_FIELD_ANY) { 812 mf->field = V4L2_FIELD_INTERLACED_BT; 813 } else if (mf->field != V4L2_FIELD_INTERLACED_BT) { 814 dev_err(&client->dev, "Field type %d invalid\n", mf->field); 815 return -EINVAL; 816 } 817 818 mf->code = MEDIA_BUS_FMT_UYVY8_2X8; 819 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 820 821 /* Select suitable norm. */ 822 scale = tw9910_select_norm(priv->norm, mf->width, mf->height); 823 if (!scale) 824 return -EINVAL; 825 826 mf->width = scale->width; 827 mf->height = scale->height; 828 829 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) 830 return tw9910_s_fmt(sd, mf); 831 832 sd_state->pads->try_fmt = *mf; 833 834 return 0; 835 } 836 837 static int tw9910_video_probe(struct i2c_client *client) 838 { 839 struct tw9910_priv *priv = to_tw9910(client); 840 s32 id; 841 int ret; 842 843 /* TW9910 only use 8 or 16 bit bus width. */ 844 if (priv->info->buswidth != 16 && priv->info->buswidth != 8) { 845 dev_err(&client->dev, "bus width error\n"); 846 return -ENODEV; 847 } 848 849 ret = tw9910_s_power(&priv->subdev, 1); 850 if (ret < 0) 851 return ret; 852 853 /* 854 * Check and show Product ID. 855 * So far only revisions 0 and 1 have been seen. 856 */ 857 id = i2c_smbus_read_byte_data(client, ID); 858 priv->revision = GET_REV(id); 859 id = GET_ID(id); 860 861 if (id != 0x0b || priv->revision > 0x01) { 862 dev_err(&client->dev, "Product ID error %x:%x\n", 863 id, priv->revision); 864 ret = -ENODEV; 865 goto done; 866 } 867 868 dev_info(&client->dev, "tw9910 Product ID %0x:%0x\n", 869 id, priv->revision); 870 871 priv->norm = V4L2_STD_NTSC; 872 priv->scale = &tw9910_ntsc_scales[0]; 873 874 done: 875 tw9910_s_power(&priv->subdev, 0); 876 877 return ret; 878 } 879 880 static const struct v4l2_subdev_core_ops tw9910_subdev_core_ops = { 881 #ifdef CONFIG_VIDEO_ADV_DEBUG 882 .g_register = tw9910_g_register, 883 .s_register = tw9910_s_register, 884 #endif 885 .s_power = tw9910_s_power, 886 }; 887 888 static int tw9910_enum_mbus_code(struct v4l2_subdev *sd, 889 struct v4l2_subdev_state *sd_state, 890 struct v4l2_subdev_mbus_code_enum *code) 891 { 892 if (code->pad || code->index) 893 return -EINVAL; 894 895 code->code = MEDIA_BUS_FMT_UYVY8_2X8; 896 897 return 0; 898 } 899 900 static int tw9910_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) 901 { 902 *norm = V4L2_STD_NTSC | V4L2_STD_PAL; 903 904 return 0; 905 } 906 907 static const struct v4l2_subdev_video_ops tw9910_subdev_video_ops = { 908 .s_std = tw9910_s_std, 909 .g_std = tw9910_g_std, 910 .s_stream = tw9910_s_stream, 911 .g_tvnorms = tw9910_g_tvnorms, 912 }; 913 914 static const struct v4l2_subdev_pad_ops tw9910_subdev_pad_ops = { 915 .enum_mbus_code = tw9910_enum_mbus_code, 916 .get_selection = tw9910_get_selection, 917 .get_fmt = tw9910_get_fmt, 918 .set_fmt = tw9910_set_fmt, 919 }; 920 921 static const struct v4l2_subdev_ops tw9910_subdev_ops = { 922 .core = &tw9910_subdev_core_ops, 923 .video = &tw9910_subdev_video_ops, 924 .pad = &tw9910_subdev_pad_ops, 925 }; 926 927 /* 928 * i2c_driver function 929 */ 930 931 static int tw9910_probe(struct i2c_client *client) 932 933 { 934 struct tw9910_priv *priv; 935 struct tw9910_video_info *info; 936 struct i2c_adapter *adapter = client->adapter; 937 int ret; 938 939 if (!client->dev.platform_data) { 940 dev_err(&client->dev, "TW9910: missing platform data!\n"); 941 return -EINVAL; 942 } 943 944 info = client->dev.platform_data; 945 946 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { 947 dev_err(&client->dev, 948 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE_DATA\n"); 949 return -EIO; 950 } 951 952 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); 953 if (!priv) 954 return -ENOMEM; 955 956 priv->info = info; 957 958 v4l2_i2c_subdev_init(&priv->subdev, client, &tw9910_subdev_ops); 959 960 priv->clk = clk_get(&client->dev, "xti"); 961 if (PTR_ERR(priv->clk) == -ENOENT) { 962 priv->clk = NULL; 963 } else if (IS_ERR(priv->clk)) { 964 dev_err(&client->dev, "Unable to get xti clock\n"); 965 return PTR_ERR(priv->clk); 966 } 967 968 priv->pdn_gpio = gpiod_get_optional(&client->dev, "pdn", 969 GPIOD_OUT_HIGH); 970 if (IS_ERR(priv->pdn_gpio)) { 971 dev_info(&client->dev, "Unable to get GPIO \"pdn\""); 972 ret = PTR_ERR(priv->pdn_gpio); 973 goto error_clk_put; 974 } 975 976 ret = tw9910_video_probe(client); 977 if (ret < 0) 978 goto error_gpio_put; 979 980 ret = v4l2_async_register_subdev(&priv->subdev); 981 if (ret) 982 goto error_gpio_put; 983 984 return ret; 985 986 error_gpio_put: 987 if (priv->pdn_gpio) 988 gpiod_put(priv->pdn_gpio); 989 error_clk_put: 990 clk_put(priv->clk); 991 992 return ret; 993 } 994 995 static void tw9910_remove(struct i2c_client *client) 996 { 997 struct tw9910_priv *priv = to_tw9910(client); 998 999 if (priv->pdn_gpio) 1000 gpiod_put(priv->pdn_gpio); 1001 clk_put(priv->clk); 1002 v4l2_async_unregister_subdev(&priv->subdev); 1003 } 1004 1005 static const struct i2c_device_id tw9910_id[] = { 1006 { "tw9910", 0 }, 1007 { } 1008 }; 1009 MODULE_DEVICE_TABLE(i2c, tw9910_id); 1010 1011 static struct i2c_driver tw9910_i2c_driver = { 1012 .driver = { 1013 .name = "tw9910", 1014 }, 1015 .probe = tw9910_probe, 1016 .remove = tw9910_remove, 1017 .id_table = tw9910_id, 1018 }; 1019 1020 module_i2c_driver(tw9910_i2c_driver); 1021 1022 MODULE_DESCRIPTION("V4L2 driver for TW9910 video decoder"); 1023 MODULE_AUTHOR("Kuninori Morimoto"); 1024 MODULE_LICENSE("GPL v2"); 1025