xref: /openbmc/linux/drivers/media/i2c/tvp5150.c (revision efe4a1ac)
1 /*
2  * tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver
3  *
4  * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5  * This code is placed under the terms of the GNU General Public License v2
6  */
7 
8 #include <dt-bindings/media/tvp5150.h>
9 #include <linux/i2c.h>
10 #include <linux/slab.h>
11 #include <linux/videodev2.h>
12 #include <linux/delay.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/module.h>
15 #include <media/v4l2-async.h>
16 #include <media/v4l2-device.h>
17 #include <media/v4l2-ctrls.h>
18 #include <media/v4l2-of.h>
19 #include <media/v4l2-mc.h>
20 
21 #include "tvp5150_reg.h"
22 
23 #define TVP5150_H_MAX		720U
24 #define TVP5150_V_MAX_525_60	480U
25 #define TVP5150_V_MAX_OTHERS	576U
26 #define TVP5150_MAX_CROP_LEFT	511
27 #define TVP5150_MAX_CROP_TOP	127
28 #define TVP5150_CROP_SHIFT	2
29 
30 MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
31 MODULE_AUTHOR("Mauro Carvalho Chehab");
32 MODULE_LICENSE("GPL");
33 
34 
35 static int debug;
36 module_param(debug, int, 0644);
37 MODULE_PARM_DESC(debug, "Debug level (0-2)");
38 
39 #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
40 
41 struct tvp5150 {
42 	struct v4l2_subdev sd;
43 #ifdef CONFIG_MEDIA_CONTROLLER
44 	struct media_pad pads[DEMOD_NUM_PADS];
45 	struct media_entity input_ent[TVP5150_INPUT_NUM];
46 	struct media_pad input_pad[TVP5150_INPUT_NUM];
47 #endif
48 	struct v4l2_ctrl_handler hdl;
49 	struct v4l2_rect rect;
50 
51 	v4l2_std_id norm;	/* Current set standard */
52 	u32 input;
53 	u32 output;
54 	int enable;
55 
56 	u16 dev_id;
57 	u16 rom_ver;
58 
59 	enum v4l2_mbus_type mbus_type;
60 };
61 
62 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
63 {
64 	return container_of(sd, struct tvp5150, sd);
65 }
66 
67 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
68 {
69 	return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
70 }
71 
72 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
73 {
74 	struct i2c_client *c = v4l2_get_subdevdata(sd);
75 	int rc;
76 
77 	rc = i2c_smbus_read_byte_data(c, addr);
78 	if (rc < 0) {
79 		dev_err(sd->dev, "i2c i/o error: rc == %d\n", rc);
80 		return rc;
81 	}
82 
83 	dev_dbg_lvl(sd->dev, 2, debug, "tvp5150: read 0x%02x = %02x\n", addr, rc);
84 
85 	return rc;
86 }
87 
88 static int tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
89 				 unsigned char value)
90 {
91 	struct i2c_client *c = v4l2_get_subdevdata(sd);
92 	int rc;
93 
94 	dev_dbg_lvl(sd->dev, 2, debug, "tvp5150: writing %02x %02x\n", addr, value);
95 	rc = i2c_smbus_write_byte_data(c, addr, value);
96 	if (rc < 0)
97 		dev_err(sd->dev, "i2c i/o error: rc == %d\n", rc);
98 
99 	return rc;
100 }
101 
102 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
103 				const u8 end, int max_line)
104 {
105 	u8 buf[16];
106 	int i = 0, j, len;
107 
108 	if (max_line > 16) {
109 		dprintk0(sd->dev, "too much data to dump\n");
110 		return;
111 	}
112 
113 	for (i = init; i < end; i += max_line) {
114 		len = (end - i > max_line) ? max_line : end - i;
115 
116 		for (j = 0; j < len; j++)
117 			buf[j] = tvp5150_read(sd, i + j);
118 
119 		dprintk0(sd->dev, "%s reg %02x = %*ph\n", s, i, len, buf);
120 	}
121 }
122 
123 static int tvp5150_log_status(struct v4l2_subdev *sd)
124 {
125 	dprintk0(sd->dev, "tvp5150: Video input source selection #1 = 0x%02x\n",
126 		tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
127 	dprintk0(sd->dev, "tvp5150: Analog channel controls = 0x%02x\n",
128 		tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
129 	dprintk0(sd->dev, "tvp5150: Operation mode controls = 0x%02x\n",
130 		tvp5150_read(sd, TVP5150_OP_MODE_CTL));
131 	dprintk0(sd->dev, "tvp5150: Miscellaneous controls = 0x%02x\n",
132 		tvp5150_read(sd, TVP5150_MISC_CTL));
133 	dprintk0(sd->dev, "tvp5150: Autoswitch mask= 0x%02x\n",
134 		tvp5150_read(sd, TVP5150_AUTOSW_MSK));
135 	dprintk0(sd->dev, "tvp5150: Color killer threshold control = 0x%02x\n",
136 		tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
137 	dprintk0(sd->dev, "tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
138 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
139 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
140 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
141 	dprintk0(sd->dev, "tvp5150: Brightness control = 0x%02x\n",
142 		tvp5150_read(sd, TVP5150_BRIGHT_CTL));
143 	dprintk0(sd->dev, "tvp5150: Color saturation control = 0x%02x\n",
144 		tvp5150_read(sd, TVP5150_SATURATION_CTL));
145 	dprintk0(sd->dev, "tvp5150: Hue control = 0x%02x\n",
146 		tvp5150_read(sd, TVP5150_HUE_CTL));
147 	dprintk0(sd->dev, "tvp5150: Contrast control = 0x%02x\n",
148 		tvp5150_read(sd, TVP5150_CONTRAST_CTL));
149 	dprintk0(sd->dev, "tvp5150: Outputs and data rates select = 0x%02x\n",
150 		tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
151 	dprintk0(sd->dev, "tvp5150: Configuration shared pins = 0x%02x\n",
152 		tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
153 	dprintk0(sd->dev, "tvp5150: Active video cropping start = 0x%02x%02x\n",
154 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
155 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
156 	dprintk0(sd->dev, "tvp5150: Active video cropping stop  = 0x%02x%02x\n",
157 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
158 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
159 	dprintk0(sd->dev, "tvp5150: Genlock/RTC = 0x%02x\n",
160 		tvp5150_read(sd, TVP5150_GENLOCK));
161 	dprintk0(sd->dev, "tvp5150: Horizontal sync start = 0x%02x\n",
162 		tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
163 	dprintk0(sd->dev, "tvp5150: Vertical blanking start = 0x%02x\n",
164 		tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
165 	dprintk0(sd->dev, "tvp5150: Vertical blanking stop = 0x%02x\n",
166 		tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
167 	dprintk0(sd->dev, "tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
168 		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
169 		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
170 	dprintk0(sd->dev, "tvp5150: Interrupt reset register B = 0x%02x\n",
171 		tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
172 	dprintk0(sd->dev, "tvp5150: Interrupt enable register B = 0x%02x\n",
173 		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
174 	dprintk0(sd->dev, "tvp5150: Interrupt configuration register B = 0x%02x\n",
175 		tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
176 	dprintk0(sd->dev, "tvp5150: Video standard = 0x%02x\n",
177 		tvp5150_read(sd, TVP5150_VIDEO_STD));
178 	dprintk0(sd->dev, "tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
179 		tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
180 		tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
181 	dprintk0(sd->dev, "tvp5150: Macrovision on counter = 0x%02x\n",
182 		tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
183 	dprintk0(sd->dev, "tvp5150: Macrovision off counter = 0x%02x\n",
184 		tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
185 	dprintk0(sd->dev, "tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
186 		(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
187 	dprintk0(sd->dev, "tvp5150: Device ID = %02x%02x\n",
188 		tvp5150_read(sd, TVP5150_MSB_DEV_ID),
189 		tvp5150_read(sd, TVP5150_LSB_DEV_ID));
190 	dprintk0(sd->dev, "tvp5150: ROM version = (hex) %02x.%02x\n",
191 		tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
192 		tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
193 	dprintk0(sd->dev, "tvp5150: Vertical line count = 0x%02x%02x\n",
194 		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
195 		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
196 	dprintk0(sd->dev, "tvp5150: Interrupt status register B = 0x%02x\n",
197 		tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
198 	dprintk0(sd->dev, "tvp5150: Interrupt active register B = 0x%02x\n",
199 		tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
200 	dprintk0(sd->dev, "tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
201 		tvp5150_read(sd, TVP5150_STATUS_REG_1),
202 		tvp5150_read(sd, TVP5150_STATUS_REG_2),
203 		tvp5150_read(sd, TVP5150_STATUS_REG_3),
204 		tvp5150_read(sd, TVP5150_STATUS_REG_4),
205 		tvp5150_read(sd, TVP5150_STATUS_REG_5));
206 
207 	dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
208 			TVP5150_TELETEXT_FIL1_END, 8);
209 	dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
210 			TVP5150_TELETEXT_FIL2_END, 8);
211 
212 	dprintk0(sd->dev, "tvp5150: Teletext filter enable = 0x%02x\n",
213 		tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
214 	dprintk0(sd->dev, "tvp5150: Interrupt status register A = 0x%02x\n",
215 		tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
216 	dprintk0(sd->dev, "tvp5150: Interrupt enable register A = 0x%02x\n",
217 		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
218 	dprintk0(sd->dev, "tvp5150: Interrupt configuration = 0x%02x\n",
219 		tvp5150_read(sd, TVP5150_INT_CONF));
220 	dprintk0(sd->dev, "tvp5150: VDP status register = 0x%02x\n",
221 		tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
222 	dprintk0(sd->dev, "tvp5150: FIFO word count = 0x%02x\n",
223 		tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
224 	dprintk0(sd->dev, "tvp5150: FIFO interrupt threshold = 0x%02x\n",
225 		tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
226 	dprintk0(sd->dev, "tvp5150: FIFO reset = 0x%02x\n",
227 		tvp5150_read(sd, TVP5150_FIFO_RESET));
228 	dprintk0(sd->dev, "tvp5150: Line number interrupt = 0x%02x\n",
229 		tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
230 	dprintk0(sd->dev, "tvp5150: Pixel alignment register = 0x%02x%02x\n",
231 		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
232 		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
233 	dprintk0(sd->dev, "tvp5150: FIFO output control = 0x%02x\n",
234 		tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
235 	dprintk0(sd->dev, "tvp5150: Full field enable = 0x%02x\n",
236 		tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
237 	dprintk0(sd->dev, "tvp5150: Full field mode register = 0x%02x\n",
238 		tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
239 
240 	dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
241 			TVP5150_CC_DATA_END, 8);
242 
243 	dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
244 			TVP5150_WSS_DATA_END, 8);
245 
246 	dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
247 			TVP5150_VPS_DATA_END, 8);
248 
249 	dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
250 			TVP5150_VITC_DATA_END, 10);
251 
252 	dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
253 			TVP5150_LINE_MODE_END, 8);
254 	return 0;
255 }
256 
257 /****************************************************************************
258 			Basic functions
259  ****************************************************************************/
260 
261 static void tvp5150_selmux(struct v4l2_subdev *sd)
262 {
263 	int opmode = 0;
264 	struct tvp5150 *decoder = to_tvp5150(sd);
265 	int input = 0;
266 	int val;
267 
268 	/* Only tvp5150am1 and tvp5151 have signal generator support */
269 	if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) ||
270 	    (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) {
271 		if (!decoder->enable)
272 			input = 8;
273 	}
274 
275 	switch (decoder->input) {
276 	case TVP5150_COMPOSITE1:
277 		input |= 2;
278 		/* fall through */
279 	case TVP5150_COMPOSITE0:
280 		break;
281 	case TVP5150_SVIDEO:
282 	default:
283 		input |= 1;
284 		break;
285 	}
286 
287 	dev_dbg_lvl(sd->dev, 1, debug, "Selecting video route: route input=%i, output=%i => tvp5150 input=%i, opmode=%i\n",
288 			decoder->input, decoder->output,
289 			input, opmode);
290 
291 	tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
292 	tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
293 
294 	/*
295 	 * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
296 	 * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
297 	 * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
298 	 * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
299 	 * INTREQ/GPCL/VBLK to logic 1.
300 	 */
301 	val = tvp5150_read(sd, TVP5150_MISC_CTL);
302 	if (val < 0) {
303 		dev_err(sd->dev, "%s: failed with error = %d\n", __func__, val);
304 		return;
305 	}
306 
307 	if (decoder->input == TVP5150_SVIDEO)
308 		val = (val & ~TVP5150_MISC_CTL_GPCL) | TVP5150_MISC_CTL_HVLK;
309 	else
310 		val = (val & ~TVP5150_MISC_CTL_HVLK) | TVP5150_MISC_CTL_GPCL;
311 	tvp5150_write(sd, TVP5150_MISC_CTL, val);
312 };
313 
314 struct i2c_reg_value {
315 	unsigned char reg;
316 	unsigned char value;
317 };
318 
319 /* Default values as sugested at TVP5150AM1 datasheet */
320 static const struct i2c_reg_value tvp5150_init_default[] = {
321 	{ /* 0x00 */
322 		TVP5150_VD_IN_SRC_SEL_1,0x00
323 	},
324 	{ /* 0x01 */
325 		TVP5150_ANAL_CHL_CTL,0x15
326 	},
327 	{ /* 0x02 */
328 		TVP5150_OP_MODE_CTL,0x00
329 	},
330 	{ /* 0x03 */
331 		TVP5150_MISC_CTL,0x01
332 	},
333 	{ /* 0x06 */
334 		TVP5150_COLOR_KIL_THSH_CTL,0x10
335 	},
336 	{ /* 0x07 */
337 		TVP5150_LUMA_PROC_CTL_1,0x60
338 	},
339 	{ /* 0x08 */
340 		TVP5150_LUMA_PROC_CTL_2,0x00
341 	},
342 	{ /* 0x09 */
343 		TVP5150_BRIGHT_CTL,0x80
344 	},
345 	{ /* 0x0a */
346 		TVP5150_SATURATION_CTL,0x80
347 	},
348 	{ /* 0x0b */
349 		TVP5150_HUE_CTL,0x00
350 	},
351 	{ /* 0x0c */
352 		TVP5150_CONTRAST_CTL,0x80
353 	},
354 	{ /* 0x0d */
355 		TVP5150_DATA_RATE_SEL,0x47
356 	},
357 	{ /* 0x0e */
358 		TVP5150_LUMA_PROC_CTL_3,0x00
359 	},
360 	{ /* 0x0f */
361 		TVP5150_CONF_SHARED_PIN,0x08
362 	},
363 	{ /* 0x11 */
364 		TVP5150_ACT_VD_CROP_ST_MSB,0x00
365 	},
366 	{ /* 0x12 */
367 		TVP5150_ACT_VD_CROP_ST_LSB,0x00
368 	},
369 	{ /* 0x13 */
370 		TVP5150_ACT_VD_CROP_STP_MSB,0x00
371 	},
372 	{ /* 0x14 */
373 		TVP5150_ACT_VD_CROP_STP_LSB,0x00
374 	},
375 	{ /* 0x15 */
376 		TVP5150_GENLOCK,0x01
377 	},
378 	{ /* 0x16 */
379 		TVP5150_HORIZ_SYNC_START,0x80
380 	},
381 	{ /* 0x18 */
382 		TVP5150_VERT_BLANKING_START,0x00
383 	},
384 	{ /* 0x19 */
385 		TVP5150_VERT_BLANKING_STOP,0x00
386 	},
387 	{ /* 0x1a */
388 		TVP5150_CHROMA_PROC_CTL_1,0x0c
389 	},
390 	{ /* 0x1b */
391 		TVP5150_CHROMA_PROC_CTL_2,0x14
392 	},
393 	{ /* 0x1c */
394 		TVP5150_INT_RESET_REG_B,0x00
395 	},
396 	{ /* 0x1d */
397 		TVP5150_INT_ENABLE_REG_B,0x00
398 	},
399 	{ /* 0x1e */
400 		TVP5150_INTT_CONFIG_REG_B,0x00
401 	},
402 	{ /* 0x28 */
403 		TVP5150_VIDEO_STD,0x00
404 	},
405 	{ /* 0x2e */
406 		TVP5150_MACROVISION_ON_CTR,0x0f
407 	},
408 	{ /* 0x2f */
409 		TVP5150_MACROVISION_OFF_CTR,0x01
410 	},
411 	{ /* 0xbb */
412 		TVP5150_TELETEXT_FIL_ENA,0x00
413 	},
414 	{ /* 0xc0 */
415 		TVP5150_INT_STATUS_REG_A,0x00
416 	},
417 	{ /* 0xc1 */
418 		TVP5150_INT_ENABLE_REG_A,0x00
419 	},
420 	{ /* 0xc2 */
421 		TVP5150_INT_CONF,0x04
422 	},
423 	{ /* 0xc8 */
424 		TVP5150_FIFO_INT_THRESHOLD,0x80
425 	},
426 	{ /* 0xc9 */
427 		TVP5150_FIFO_RESET,0x00
428 	},
429 	{ /* 0xca */
430 		TVP5150_LINE_NUMBER_INT,0x00
431 	},
432 	{ /* 0xcb */
433 		TVP5150_PIX_ALIGN_REG_LOW,0x4e
434 	},
435 	{ /* 0xcc */
436 		TVP5150_PIX_ALIGN_REG_HIGH,0x00
437 	},
438 	{ /* 0xcd */
439 		TVP5150_FIFO_OUT_CTRL,0x01
440 	},
441 	{ /* 0xcf */
442 		TVP5150_FULL_FIELD_ENA,0x00
443 	},
444 	{ /* 0xd0 */
445 		TVP5150_LINE_MODE_INI,0x00
446 	},
447 	{ /* 0xfc */
448 		TVP5150_FULL_FIELD_MODE_REG,0x7f
449 	},
450 	{ /* end of data */
451 		0xff,0xff
452 	}
453 };
454 
455 /* Default values as sugested at TVP5150AM1 datasheet */
456 static const struct i2c_reg_value tvp5150_init_enable[] = {
457 	{
458 		TVP5150_CONF_SHARED_PIN, 2
459 	},{	/* Automatic offset and AGC enabled */
460 		TVP5150_ANAL_CHL_CTL, 0x15
461 	},{	/* Activate YCrCb output 0x9 or 0xd ? */
462 		TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
463 				  TVP5150_MISC_CTL_INTREQ_OE |
464 				  TVP5150_MISC_CTL_YCBCR_OE |
465 				  TVP5150_MISC_CTL_SYNC_OE |
466 				  TVP5150_MISC_CTL_VBLANK |
467 				  TVP5150_MISC_CTL_CLOCK_OE,
468 	},{	/* Activates video std autodetection for all standards */
469 		TVP5150_AUTOSW_MSK, 0x0
470 	},{	/* Default format: 0x47. For 4:2:2: 0x40 */
471 		TVP5150_DATA_RATE_SEL, 0x47
472 	},{
473 		TVP5150_CHROMA_PROC_CTL_1, 0x0c
474 	},{
475 		TVP5150_CHROMA_PROC_CTL_2, 0x54
476 	},{	/* Non documented, but initialized on WinTV USB2 */
477 		0x27, 0x20
478 	},{
479 		0xff,0xff
480 	}
481 };
482 
483 struct tvp5150_vbi_type {
484 	unsigned int vbi_type;
485 	unsigned int ini_line;
486 	unsigned int end_line;
487 	unsigned int by_field :1;
488 };
489 
490 struct i2c_vbi_ram_value {
491 	u16 reg;
492 	struct tvp5150_vbi_type type;
493 	unsigned char values[16];
494 };
495 
496 /* This struct have the values for each supported VBI Standard
497  * by
498  tvp5150_vbi_types should follow the same order as vbi_ram_default
499  * value 0 means rom position 0x10, value 1 means rom position 0x30
500  * and so on. There are 16 possible locations from 0 to 15.
501  */
502 
503 static struct i2c_vbi_ram_value vbi_ram_default[] =
504 {
505 	/* FIXME: Current api doesn't handle all VBI types, those not
506 	   yet supported are placed under #if 0 */
507 #if 0
508 	{0x010, /* Teletext, SECAM, WST System A */
509 		{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
510 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
511 		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
512 	},
513 #endif
514 	{0x030, /* Teletext, PAL, WST System B */
515 		{V4L2_SLICED_TELETEXT_B,6,22,1},
516 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
517 		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
518 	},
519 #if 0
520 	{0x050, /* Teletext, PAL, WST System C */
521 		{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
522 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
523 		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
524 	},
525 	{0x070, /* Teletext, NTSC, WST System B */
526 		{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
527 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
528 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
529 	},
530 	{0x090, /* Tetetext, NTSC NABTS System C */
531 		{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
532 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
533 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
534 	},
535 	{0x0b0, /* Teletext, NTSC-J, NABTS System D */
536 		{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
537 		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
538 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
539 	},
540 	{0x0d0, /* Closed Caption, PAL/SECAM */
541 		{V4L2_SLICED_CAPTION_625,22,22,1},
542 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
543 		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
544 	},
545 #endif
546 	{0x0f0, /* Closed Caption, NTSC */
547 		{V4L2_SLICED_CAPTION_525,21,21,1},
548 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
549 		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
550 	},
551 	{0x110, /* Wide Screen Signal, PAL/SECAM */
552 		{V4L2_SLICED_WSS_625,23,23,1},
553 		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
554 		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
555 	},
556 #if 0
557 	{0x130, /* Wide Screen Signal, NTSC C */
558 		{V4L2_SLICED_WSS_525,20,20,1},
559 		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
560 		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
561 	},
562 	{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
563 		{V4l2_SLICED_VITC_625,6,22,0},
564 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
565 		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
566 	},
567 	{0x170, /* Vertical Interval Timecode (VITC), NTSC */
568 		{V4l2_SLICED_VITC_525,10,20,0},
569 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
570 		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
571 	},
572 #endif
573 	{0x190, /* Video Program System (VPS), PAL */
574 		{V4L2_SLICED_VPS,16,16,0},
575 		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
576 		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
577 	},
578 	/* 0x1d0 User programmable */
579 
580 	/* End of struct */
581 	{ (u16)-1 }
582 };
583 
584 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
585 				const struct i2c_reg_value *regs)
586 {
587 	while (regs->reg != 0xff) {
588 		tvp5150_write(sd, regs->reg, regs->value);
589 		regs++;
590 	}
591 	return 0;
592 }
593 
594 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
595 				const struct i2c_vbi_ram_value *regs)
596 {
597 	unsigned int i;
598 
599 	/* Disable Full Field */
600 	tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
601 
602 	/* Before programming, Line mode should be at 0xff */
603 	for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
604 		tvp5150_write(sd, i, 0xff);
605 
606 	/* Load Ram Table */
607 	while (regs->reg != (u16)-1) {
608 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
609 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
610 
611 		for (i = 0; i < 16; i++)
612 			tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
613 
614 		regs++;
615 	}
616 	return 0;
617 }
618 
619 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
620 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
621 				struct v4l2_sliced_vbi_cap *cap)
622 {
623 	const struct i2c_vbi_ram_value *regs = vbi_ram_default;
624 	int line;
625 
626 	dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
627 	memset(cap, 0, sizeof *cap);
628 
629 	while (regs->reg != (u16)-1 ) {
630 		for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
631 			cap->service_lines[0][line] |= regs->type.vbi_type;
632 		}
633 		cap->service_set |= regs->type.vbi_type;
634 
635 		regs++;
636 	}
637 	return 0;
638 }
639 
640 /* Set vbi processing
641  * type - one of tvp5150_vbi_types
642  * line - line to gather data
643  * fields: bit 0 field1, bit 1, field2
644  * flags (default=0xf0) is a bitmask, were set means:
645  *	bit 7: enable filtering null bytes on CC
646  *	bit 6: send data also to FIFO
647  *	bit 5: don't allow data with errors on FIFO
648  *	bit 4: enable ECC when possible
649  * pix_align = pix alignment:
650  *	LSB = field1
651  *	MSB = field2
652  */
653 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
654 			const struct i2c_vbi_ram_value *regs,
655 			unsigned int type,u8 flags, int line,
656 			const int fields)
657 {
658 	struct tvp5150 *decoder = to_tvp5150(sd);
659 	v4l2_std_id std = decoder->norm;
660 	u8 reg;
661 	int pos=0;
662 
663 	if (std == V4L2_STD_ALL) {
664 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
665 		return 0;
666 	} else if (std & V4L2_STD_625_50) {
667 		/* Don't follow NTSC Line number convension */
668 		line += 3;
669 	}
670 
671 	if (line<6||line>27)
672 		return 0;
673 
674 	while (regs->reg != (u16)-1 ) {
675 		if ((type & regs->type.vbi_type) &&
676 		    (line>=regs->type.ini_line) &&
677 		    (line<=regs->type.end_line)) {
678 			type=regs->type.vbi_type;
679 			break;
680 		}
681 
682 		regs++;
683 		pos++;
684 	}
685 	if (regs->reg == (u16)-1)
686 		return 0;
687 
688 	type=pos | (flags & 0xf0);
689 	reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
690 
691 	if (fields&1) {
692 		tvp5150_write(sd, reg, type);
693 	}
694 
695 	if (fields&2) {
696 		tvp5150_write(sd, reg+1, type);
697 	}
698 
699 	return type;
700 }
701 
702 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
703 			const struct i2c_vbi_ram_value *regs, int line)
704 {
705 	struct tvp5150 *decoder = to_tvp5150(sd);
706 	v4l2_std_id std = decoder->norm;
707 	u8 reg;
708 	int pos, type = 0;
709 	int i, ret = 0;
710 
711 	if (std == V4L2_STD_ALL) {
712 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
713 		return 0;
714 	} else if (std & V4L2_STD_625_50) {
715 		/* Don't follow NTSC Line number convension */
716 		line += 3;
717 	}
718 
719 	if (line < 6 || line > 27)
720 		return 0;
721 
722 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
723 
724 	for (i = 0; i <= 1; i++) {
725 		ret = tvp5150_read(sd, reg + i);
726 		if (ret < 0) {
727 			dev_err(sd->dev, "%s: failed with error = %d\n",
728 				 __func__, ret);
729 			return 0;
730 		}
731 		pos = ret & 0x0f;
732 		if (pos < 0x0f)
733 			type |= regs[pos].type.vbi_type;
734 	}
735 
736 	return type;
737 }
738 
739 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
740 {
741 	struct tvp5150 *decoder = to_tvp5150(sd);
742 	int fmt = 0;
743 
744 	decoder->norm = std;
745 
746 	/* First tests should be against specific std */
747 
748 	if (std == V4L2_STD_NTSC_443) {
749 		fmt = VIDEO_STD_NTSC_4_43_BIT;
750 	} else if (std == V4L2_STD_PAL_M) {
751 		fmt = VIDEO_STD_PAL_M_BIT;
752 	} else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
753 		fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
754 	} else {
755 		/* Then, test against generic ones */
756 		if (std & V4L2_STD_NTSC)
757 			fmt = VIDEO_STD_NTSC_MJ_BIT;
758 		else if (std & V4L2_STD_PAL)
759 			fmt = VIDEO_STD_PAL_BDGHIN_BIT;
760 		else if (std & V4L2_STD_SECAM)
761 			fmt = VIDEO_STD_SECAM_BIT;
762 	}
763 
764 	dev_dbg_lvl(sd->dev, 1, debug, "Set video std register to %d.\n", fmt);
765 	tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
766 	return 0;
767 }
768 
769 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
770 {
771 	struct tvp5150 *decoder = to_tvp5150(sd);
772 
773 	if (decoder->norm == std)
774 		return 0;
775 
776 	/* Change cropping height limits */
777 	if (std & V4L2_STD_525_60)
778 		decoder->rect.height = TVP5150_V_MAX_525_60;
779 	else
780 		decoder->rect.height = TVP5150_V_MAX_OTHERS;
781 
782 
783 	return tvp5150_set_std(sd, std);
784 }
785 
786 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
787 {
788 	struct tvp5150 *decoder = to_tvp5150(sd);
789 
790 	/* Initializes TVP5150 to its default values */
791 	tvp5150_write_inittab(sd, tvp5150_init_default);
792 
793 	/* Initializes VDP registers */
794 	tvp5150_vdp_init(sd, vbi_ram_default);
795 
796 	/* Selects decoder input */
797 	tvp5150_selmux(sd);
798 
799 	/* Initializes TVP5150 to stream enabled values */
800 	tvp5150_write_inittab(sd, tvp5150_init_enable);
801 
802 	/* Initialize image preferences */
803 	v4l2_ctrl_handler_setup(&decoder->hdl);
804 
805 	tvp5150_set_std(sd, decoder->norm);
806 
807 	if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
808 		tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);
809 
810 	return 0;
811 };
812 
813 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
814 {
815 	struct v4l2_subdev *sd = to_sd(ctrl);
816 	struct tvp5150 *decoder = to_tvp5150(sd);
817 
818 	switch (ctrl->id) {
819 	case V4L2_CID_BRIGHTNESS:
820 		tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
821 		return 0;
822 	case V4L2_CID_CONTRAST:
823 		tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
824 		return 0;
825 	case V4L2_CID_SATURATION:
826 		tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
827 		return 0;
828 	case V4L2_CID_HUE:
829 		tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
830 		break;
831 	case V4L2_CID_TEST_PATTERN:
832 		decoder->enable = ctrl->val ? false : true;
833 		tvp5150_selmux(sd);
834 		return 0;
835 	}
836 	return -EINVAL;
837 }
838 
839 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
840 {
841 	int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
842 
843 	switch (val & 0x0F) {
844 	case 0x01:
845 		return V4L2_STD_NTSC;
846 	case 0x03:
847 		return V4L2_STD_PAL;
848 	case 0x05:
849 		return V4L2_STD_PAL_M;
850 	case 0x07:
851 		return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
852 	case 0x09:
853 		return V4L2_STD_NTSC_443;
854 	case 0xb:
855 		return V4L2_STD_SECAM;
856 	default:
857 		return V4L2_STD_UNKNOWN;
858 	}
859 }
860 
861 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
862 		struct v4l2_subdev_pad_config *cfg,
863 		struct v4l2_subdev_format *format)
864 {
865 	struct v4l2_mbus_framefmt *f;
866 	struct tvp5150 *decoder = to_tvp5150(sd);
867 
868 	if (!format || (format->pad != DEMOD_PAD_VID_OUT))
869 		return -EINVAL;
870 
871 	f = &format->format;
872 
873 	f->width = decoder->rect.width;
874 	f->height = decoder->rect.height;
875 
876 	f->code = MEDIA_BUS_FMT_UYVY8_2X8;
877 	f->field = V4L2_FIELD_ALTERNATE;
878 	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
879 
880 	dev_dbg_lvl(sd->dev, 1, debug, "width = %d, height = %d\n", f->width,
881 			f->height);
882 	return 0;
883 }
884 
885 static int tvp5150_set_selection(struct v4l2_subdev *sd,
886 				 struct v4l2_subdev_pad_config *cfg,
887 				 struct v4l2_subdev_selection *sel)
888 {
889 	struct tvp5150 *decoder = to_tvp5150(sd);
890 	struct v4l2_rect rect = sel->r;
891 	v4l2_std_id std;
892 	int hmax;
893 
894 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
895 	    sel->target != V4L2_SEL_TGT_CROP)
896 		return -EINVAL;
897 
898 	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
899 		__func__, rect.left, rect.top, rect.width, rect.height);
900 
901 	/* tvp5150 has some special limits */
902 	rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
903 	rect.width = clamp_t(unsigned int, rect.width,
904 			     TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
905 			     TVP5150_H_MAX - rect.left);
906 	rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
907 
908 	/* Calculate height based on current standard */
909 	if (decoder->norm == V4L2_STD_ALL)
910 		std = tvp5150_read_std(sd);
911 	else
912 		std = decoder->norm;
913 
914 	if (std & V4L2_STD_525_60)
915 		hmax = TVP5150_V_MAX_525_60;
916 	else
917 		hmax = TVP5150_V_MAX_OTHERS;
918 
919 	rect.height = clamp_t(unsigned int, rect.height,
920 			      hmax - TVP5150_MAX_CROP_TOP - rect.top,
921 			      hmax - rect.top);
922 
923 	tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
924 	tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
925 		      rect.top + rect.height - hmax);
926 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
927 		      rect.left >> TVP5150_CROP_SHIFT);
928 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
929 		      rect.left | (1 << TVP5150_CROP_SHIFT));
930 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
931 		      (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
932 		      TVP5150_CROP_SHIFT);
933 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
934 		      rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
935 
936 	decoder->rect = rect;
937 
938 	return 0;
939 }
940 
941 static int tvp5150_get_selection(struct v4l2_subdev *sd,
942 				 struct v4l2_subdev_pad_config *cfg,
943 				 struct v4l2_subdev_selection *sel)
944 {
945 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
946 	v4l2_std_id std;
947 
948 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
949 		return -EINVAL;
950 
951 	switch (sel->target) {
952 	case V4L2_SEL_TGT_CROP_BOUNDS:
953 	case V4L2_SEL_TGT_CROP_DEFAULT:
954 		sel->r.left = 0;
955 		sel->r.top = 0;
956 		sel->r.width = TVP5150_H_MAX;
957 
958 		/* Calculate height based on current standard */
959 		if (decoder->norm == V4L2_STD_ALL)
960 			std = tvp5150_read_std(sd);
961 		else
962 			std = decoder->norm;
963 		if (std & V4L2_STD_525_60)
964 			sel->r.height = TVP5150_V_MAX_525_60;
965 		else
966 			sel->r.height = TVP5150_V_MAX_OTHERS;
967 		return 0;
968 	case V4L2_SEL_TGT_CROP:
969 		sel->r = decoder->rect;
970 		return 0;
971 	default:
972 		return -EINVAL;
973 	}
974 }
975 
976 static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
977 				 struct v4l2_mbus_config *cfg)
978 {
979 	struct tvp5150 *decoder = to_tvp5150(sd);
980 
981 	cfg->type = decoder->mbus_type;
982 	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
983 		   | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
984 
985 	return 0;
986 }
987 
988 /****************************************************************************
989 			V4L2 subdev pad ops
990  ****************************************************************************/
991 static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
992 		struct v4l2_subdev_pad_config *cfg,
993 		struct v4l2_subdev_mbus_code_enum *code)
994 {
995 	if (code->pad || code->index)
996 		return -EINVAL;
997 
998 	code->code = MEDIA_BUS_FMT_UYVY8_2X8;
999 	return 0;
1000 }
1001 
1002 static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
1003 				   struct v4l2_subdev_pad_config *cfg,
1004 				   struct v4l2_subdev_frame_size_enum *fse)
1005 {
1006 	struct tvp5150 *decoder = to_tvp5150(sd);
1007 
1008 	if (fse->index >= 8 || fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
1009 		return -EINVAL;
1010 
1011 	fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
1012 	fse->min_width = decoder->rect.width;
1013 	fse->max_width = decoder->rect.width;
1014 	fse->min_height = decoder->rect.height / 2;
1015 	fse->max_height = decoder->rect.height / 2;
1016 
1017 	return 0;
1018 }
1019 
1020 /****************************************************************************
1021 			Media entity ops
1022  ****************************************************************************/
1023 
1024 #ifdef CONFIG_MEDIA_CONTROLLER
1025 static int tvp5150_link_setup(struct media_entity *entity,
1026 			      const struct media_pad *local,
1027 			      const struct media_pad *remote, u32 flags)
1028 {
1029 	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1030 	struct tvp5150 *decoder = to_tvp5150(sd);
1031 	int i;
1032 
1033 	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1034 		if (remote->entity == &decoder->input_ent[i])
1035 			break;
1036 	}
1037 
1038 	/* Do nothing for entities that are not input connectors */
1039 	if (i == TVP5150_INPUT_NUM)
1040 		return 0;
1041 
1042 	decoder->input = i;
1043 
1044 	tvp5150_selmux(sd);
1045 
1046 	return 0;
1047 }
1048 
1049 static const struct media_entity_operations tvp5150_sd_media_ops = {
1050 	.link_setup = tvp5150_link_setup,
1051 };
1052 #endif
1053 
1054 /****************************************************************************
1055 			I2C Command
1056  ****************************************************************************/
1057 
1058 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
1059 {
1060 	struct tvp5150 *decoder = to_tvp5150(sd);
1061 	int val;
1062 
1063 	/* Enable or disable the video output signals. */
1064 	val = tvp5150_read(sd, TVP5150_MISC_CTL);
1065 	if (val < 0)
1066 		return val;
1067 
1068 	val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
1069 		 TVP5150_MISC_CTL_CLOCK_OE);
1070 
1071 	if (enable) {
1072 		/*
1073 		 * Enable the YCbCr and clock outputs. In discrete sync mode
1074 		 * (non-BT.656) additionally enable the the sync outputs.
1075 		 */
1076 		val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
1077 		if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
1078 			val |= TVP5150_MISC_CTL_SYNC_OE;
1079 	}
1080 
1081 	tvp5150_write(sd, TVP5150_MISC_CTL, val);
1082 
1083 	return 0;
1084 }
1085 
1086 static int tvp5150_s_routing(struct v4l2_subdev *sd,
1087 			     u32 input, u32 output, u32 config)
1088 {
1089 	struct tvp5150 *decoder = to_tvp5150(sd);
1090 
1091 	decoder->input = input;
1092 	decoder->output = output;
1093 
1094 	if (output == TVP5150_BLACK_SCREEN)
1095 		decoder->enable = false;
1096 	else
1097 		decoder->enable = true;
1098 
1099 	tvp5150_selmux(sd);
1100 	return 0;
1101 }
1102 
1103 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
1104 {
1105 	/* this is for capturing 36 raw vbi lines
1106 	   if there's a way to cut off the beginning 2 vbi lines
1107 	   with the tvp5150 then the vbi line count could be lowered
1108 	   to 17 lines/field again, although I couldn't find a register
1109 	   which could do that cropping */
1110 	if (fmt->sample_format == V4L2_PIX_FMT_GREY)
1111 		tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
1112 	if (fmt->count[0] == 18 && fmt->count[1] == 18) {
1113 		tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
1114 		tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
1115 	}
1116 	return 0;
1117 }
1118 
1119 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1120 {
1121 	int i;
1122 
1123 	if (svbi->service_set != 0) {
1124 		for (i = 0; i <= 23; i++) {
1125 			svbi->service_lines[1][i] = 0;
1126 			svbi->service_lines[0][i] =
1127 				tvp5150_set_vbi(sd, vbi_ram_default,
1128 				       svbi->service_lines[0][i], 0xf0, i, 3);
1129 		}
1130 		/* Enables FIFO */
1131 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
1132 	} else {
1133 		/* Disables FIFO*/
1134 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
1135 
1136 		/* Disable Full Field */
1137 		tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
1138 
1139 		/* Disable Line modes */
1140 		for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1141 			tvp5150_write(sd, i, 0xff);
1142 	}
1143 	return 0;
1144 }
1145 
1146 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1147 {
1148 	int i, mask = 0;
1149 
1150 	memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1151 
1152 	for (i = 0; i <= 23; i++) {
1153 		svbi->service_lines[0][i] =
1154 			tvp5150_get_vbi(sd, vbi_ram_default, i);
1155 		mask |= svbi->service_lines[0][i];
1156 	}
1157 	svbi->service_set = mask;
1158 	return 0;
1159 }
1160 
1161 #ifdef CONFIG_VIDEO_ADV_DEBUG
1162 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1163 {
1164 	int res;
1165 
1166 	res = tvp5150_read(sd, reg->reg & 0xff);
1167 	if (res < 0) {
1168 		dev_err(sd->dev, "%s: failed with error = %d\n", __func__, res);
1169 		return res;
1170 	}
1171 
1172 	reg->val = res;
1173 	reg->size = 1;
1174 	return 0;
1175 }
1176 
1177 static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1178 {
1179 	return tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1180 }
1181 #endif
1182 
1183 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1184 {
1185 	int status = tvp5150_read(sd, 0x88);
1186 
1187 	vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1188 	return 0;
1189 }
1190 
1191 static int tvp5150_registered(struct v4l2_subdev *sd)
1192 {
1193 #ifdef CONFIG_MEDIA_CONTROLLER
1194 	struct tvp5150 *decoder = to_tvp5150(sd);
1195 	int ret = 0;
1196 	int i;
1197 
1198 	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1199 		struct media_entity *input = &decoder->input_ent[i];
1200 		struct media_pad *pad = &decoder->input_pad[i];
1201 
1202 		if (!input->name)
1203 			continue;
1204 
1205 		decoder->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
1206 
1207 		ret = media_entity_pads_init(input, 1, pad);
1208 		if (ret < 0)
1209 			return ret;
1210 
1211 		ret = media_device_register_entity(sd->v4l2_dev->mdev, input);
1212 		if (ret < 0)
1213 			return ret;
1214 
1215 		ret = media_create_pad_link(input, 0, &sd->entity,
1216 					    DEMOD_PAD_IF_INPUT, 0);
1217 		if (ret < 0) {
1218 			media_device_unregister_entity(input);
1219 			return ret;
1220 		}
1221 	}
1222 #endif
1223 
1224 	return 0;
1225 }
1226 
1227 /* ----------------------------------------------------------------------- */
1228 
1229 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1230 	.s_ctrl = tvp5150_s_ctrl,
1231 };
1232 
1233 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1234 	.log_status = tvp5150_log_status,
1235 	.reset = tvp5150_reset,
1236 #ifdef CONFIG_VIDEO_ADV_DEBUG
1237 	.g_register = tvp5150_g_register,
1238 	.s_register = tvp5150_s_register,
1239 #endif
1240 };
1241 
1242 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1243 	.g_tuner = tvp5150_g_tuner,
1244 };
1245 
1246 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1247 	.s_std = tvp5150_s_std,
1248 	.s_stream = tvp5150_s_stream,
1249 	.s_routing = tvp5150_s_routing,
1250 	.g_mbus_config = tvp5150_g_mbus_config,
1251 };
1252 
1253 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1254 	.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1255 	.g_sliced_fmt = tvp5150_g_sliced_fmt,
1256 	.s_sliced_fmt = tvp5150_s_sliced_fmt,
1257 	.s_raw_fmt = tvp5150_s_raw_fmt,
1258 };
1259 
1260 static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {
1261 	.enum_mbus_code = tvp5150_enum_mbus_code,
1262 	.enum_frame_size = tvp5150_enum_frame_size,
1263 	.set_fmt = tvp5150_fill_fmt,
1264 	.get_fmt = tvp5150_fill_fmt,
1265 	.get_selection = tvp5150_get_selection,
1266 	.set_selection = tvp5150_set_selection,
1267 };
1268 
1269 static const struct v4l2_subdev_ops tvp5150_ops = {
1270 	.core = &tvp5150_core_ops,
1271 	.tuner = &tvp5150_tuner_ops,
1272 	.video = &tvp5150_video_ops,
1273 	.vbi = &tvp5150_vbi_ops,
1274 	.pad = &tvp5150_pad_ops,
1275 };
1276 
1277 static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
1278 	.registered = tvp5150_registered,
1279 };
1280 
1281 
1282 /****************************************************************************
1283 			I2C Client & Driver
1284  ****************************************************************************/
1285 
1286 static int tvp5150_detect_version(struct tvp5150 *core)
1287 {
1288 	struct v4l2_subdev *sd = &core->sd;
1289 	struct i2c_client *c = v4l2_get_subdevdata(sd);
1290 	unsigned int i;
1291 	u8 regs[4];
1292 	int res;
1293 
1294 	/*
1295 	 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1296 	 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
1297 	 */
1298 	for (i = 0; i < 4; i++) {
1299 		res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
1300 		if (res < 0)
1301 			return res;
1302 		regs[i] = res;
1303 	}
1304 
1305 	core->dev_id = (regs[0] << 8) | regs[1];
1306 	core->rom_ver = (regs[2] << 8) | regs[3];
1307 
1308 	dev_info(sd->dev, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
1309 		  core->dev_id, regs[2], regs[3], c->addr << 1,
1310 		  c->adapter->name);
1311 
1312 	if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {
1313 		dev_info(sd->dev, "tvp5150a detected.\n");
1314 	} else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {
1315 		dev_info(sd->dev, "tvp5150am1 detected.\n");
1316 
1317 		/* ITU-T BT.656.4 timing */
1318 		tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1319 	} else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {
1320 		dev_info(sd->dev, "tvp5151 detected.\n");
1321 	} else {
1322 		dev_info(sd->dev, "*** unknown tvp%04x chip detected.\n",
1323 			  core->dev_id);
1324 	}
1325 
1326 	return 0;
1327 }
1328 
1329 static int tvp5150_init(struct i2c_client *c)
1330 {
1331 	struct gpio_desc *pdn_gpio;
1332 	struct gpio_desc *reset_gpio;
1333 
1334 	pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);
1335 	if (IS_ERR(pdn_gpio))
1336 		return PTR_ERR(pdn_gpio);
1337 
1338 	if (pdn_gpio) {
1339 		gpiod_set_value_cansleep(pdn_gpio, 0);
1340 		/* Delay time between power supplies active and reset */
1341 		msleep(20);
1342 	}
1343 
1344 	reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);
1345 	if (IS_ERR(reset_gpio))
1346 		return PTR_ERR(reset_gpio);
1347 
1348 	if (reset_gpio) {
1349 		/* RESETB pulse duration */
1350 		ndelay(500);
1351 		gpiod_set_value_cansleep(reset_gpio, 0);
1352 		/* Delay time between end of reset to I2C active */
1353 		usleep_range(200, 250);
1354 	}
1355 
1356 	return 0;
1357 }
1358 
1359 static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
1360 {
1361 	struct v4l2_of_endpoint bus_cfg;
1362 	struct device_node *ep;
1363 #ifdef CONFIG_MEDIA_CONTROLLER
1364 	struct device_node *connectors, *child;
1365 	struct media_entity *input;
1366 	const char *name;
1367 	u32 input_type;
1368 #endif
1369 	unsigned int flags;
1370 	int ret = 0;
1371 
1372 	ep = of_graph_get_next_endpoint(np, NULL);
1373 	if (!ep)
1374 		return -EINVAL;
1375 
1376 	ret = v4l2_of_parse_endpoint(ep, &bus_cfg);
1377 	if (ret)
1378 		goto err;
1379 
1380 	flags = bus_cfg.bus.parallel.flags;
1381 
1382 	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
1383 	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
1384 	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
1385 	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
1386 		ret = -EINVAL;
1387 		goto err;
1388 	}
1389 
1390 	decoder->mbus_type = bus_cfg.bus_type;
1391 
1392 #ifdef CONFIG_MEDIA_CONTROLLER
1393 	connectors = of_get_child_by_name(np, "connectors");
1394 
1395 	if (!connectors)
1396 		goto err;
1397 
1398 	for_each_available_child_of_node(connectors, child) {
1399 		ret = of_property_read_u32(child, "input", &input_type);
1400 		if (ret) {
1401 			dev_err(decoder->sd.dev,
1402 				 "missing type property in node %s\n",
1403 				 child->name);
1404 			goto err_connector;
1405 		}
1406 
1407 		if (input_type >= TVP5150_INPUT_NUM) {
1408 			ret = -EINVAL;
1409 			goto err_connector;
1410 		}
1411 
1412 		input = &decoder->input_ent[input_type];
1413 
1414 		/* Each input connector can only be defined once */
1415 		if (input->name) {
1416 			dev_err(decoder->sd.dev,
1417 				 "input %s with same type already exists\n",
1418 				 input->name);
1419 			ret = -EINVAL;
1420 			goto err_connector;
1421 		}
1422 
1423 		switch (input_type) {
1424 		case TVP5150_COMPOSITE0:
1425 		case TVP5150_COMPOSITE1:
1426 			input->function = MEDIA_ENT_F_CONN_COMPOSITE;
1427 			break;
1428 		case TVP5150_SVIDEO:
1429 			input->function = MEDIA_ENT_F_CONN_SVIDEO;
1430 			break;
1431 		}
1432 
1433 		input->flags = MEDIA_ENT_FL_CONNECTOR;
1434 
1435 		ret = of_property_read_string(child, "label", &name);
1436 		if (ret < 0) {
1437 			dev_err(decoder->sd.dev,
1438 				 "missing label property in node %s\n",
1439 				 child->name);
1440 			goto err_connector;
1441 		}
1442 
1443 		input->name = name;
1444 	}
1445 
1446 err_connector:
1447 	of_node_put(connectors);
1448 #endif
1449 err:
1450 	of_node_put(ep);
1451 	return ret;
1452 }
1453 
1454 static const char * const tvp5150_test_patterns[2] = {
1455 	"Disabled",
1456 	"Black screen"
1457 };
1458 
1459 static int tvp5150_probe(struct i2c_client *c,
1460 			 const struct i2c_device_id *id)
1461 {
1462 	struct tvp5150 *core;
1463 	struct v4l2_subdev *sd;
1464 	struct device_node *np = c->dev.of_node;
1465 	int res;
1466 
1467 	/* Check if the adapter supports the needed features */
1468 	if (!i2c_check_functionality(c->adapter,
1469 	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1470 		return -EIO;
1471 
1472 	res = tvp5150_init(c);
1473 	if (res)
1474 		return res;
1475 
1476 	core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
1477 	if (!core)
1478 		return -ENOMEM;
1479 
1480 	sd = &core->sd;
1481 
1482 	if (IS_ENABLED(CONFIG_OF) && np) {
1483 		res = tvp5150_parse_dt(core, np);
1484 		if (res) {
1485 			dev_err(sd->dev, "DT parsing error: %d\n", res);
1486 			return res;
1487 		}
1488 	} else {
1489 		/* Default to BT.656 embedded sync */
1490 		core->mbus_type = V4L2_MBUS_BT656;
1491 	}
1492 
1493 	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1494 	sd->internal_ops = &tvp5150_internal_ops;
1495 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1496 
1497 #if defined(CONFIG_MEDIA_CONTROLLER)
1498 	core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
1499 	core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
1500 	core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
1501 
1502 	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
1503 
1504 	res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
1505 	if (res < 0)
1506 		return res;
1507 
1508 	sd->entity.ops = &tvp5150_sd_media_ops;
1509 #endif
1510 
1511 	res = tvp5150_detect_version(core);
1512 	if (res < 0)
1513 		return res;
1514 
1515 	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
1516 	core->input = TVP5150_COMPOSITE1;
1517 	core->enable = true;
1518 
1519 	v4l2_ctrl_handler_init(&core->hdl, 5);
1520 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1521 			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1522 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1523 			V4L2_CID_CONTRAST, 0, 255, 1, 128);
1524 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1525 			V4L2_CID_SATURATION, 0, 255, 1, 128);
1526 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1527 			V4L2_CID_HUE, -128, 127, 1, 0);
1528 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1529 			V4L2_CID_PIXEL_RATE, 27000000,
1530 			27000000, 1, 27000000);
1531 	v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,
1532 				     V4L2_CID_TEST_PATTERN,
1533 				     ARRAY_SIZE(tvp5150_test_patterns),
1534 				     0, 0, tvp5150_test_patterns);
1535 	sd->ctrl_handler = &core->hdl;
1536 	if (core->hdl.error) {
1537 		res = core->hdl.error;
1538 		goto err;
1539 	}
1540 
1541 	/* Default is no cropping */
1542 	core->rect.top = 0;
1543 	if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1544 		core->rect.height = TVP5150_V_MAX_525_60;
1545 	else
1546 		core->rect.height = TVP5150_V_MAX_OTHERS;
1547 	core->rect.left = 0;
1548 	core->rect.width = TVP5150_H_MAX;
1549 
1550 	tvp5150_reset(sd, 0);	/* Calls v4l2_ctrl_handler_setup() */
1551 
1552 	res = v4l2_async_register_subdev(sd);
1553 	if (res < 0)
1554 		goto err;
1555 
1556 	if (debug > 1)
1557 		tvp5150_log_status(sd);
1558 	return 0;
1559 
1560 err:
1561 	v4l2_ctrl_handler_free(&core->hdl);
1562 	return res;
1563 }
1564 
1565 static int tvp5150_remove(struct i2c_client *c)
1566 {
1567 	struct v4l2_subdev *sd = i2c_get_clientdata(c);
1568 	struct tvp5150 *decoder = to_tvp5150(sd);
1569 
1570 	dev_dbg_lvl(sd->dev, 1, debug,
1571 		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1572 		c->addr << 1);
1573 
1574 	v4l2_async_unregister_subdev(sd);
1575 	v4l2_ctrl_handler_free(&decoder->hdl);
1576 	return 0;
1577 }
1578 
1579 /* ----------------------------------------------------------------------- */
1580 
1581 static const struct i2c_device_id tvp5150_id[] = {
1582 	{ "tvp5150", 0 },
1583 	{ }
1584 };
1585 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1586 
1587 #if IS_ENABLED(CONFIG_OF)
1588 static const struct of_device_id tvp5150_of_match[] = {
1589 	{ .compatible = "ti,tvp5150", },
1590 	{ /* sentinel */ },
1591 };
1592 MODULE_DEVICE_TABLE(of, tvp5150_of_match);
1593 #endif
1594 
1595 static struct i2c_driver tvp5150_driver = {
1596 	.driver = {
1597 		.of_match_table = of_match_ptr(tvp5150_of_match),
1598 		.name	= "tvp5150",
1599 	},
1600 	.probe		= tvp5150_probe,
1601 	.remove		= tvp5150_remove,
1602 	.id_table	= tvp5150_id,
1603 };
1604 
1605 module_i2c_driver(tvp5150_driver);
1606