xref: /openbmc/linux/drivers/media/i2c/tvp5150.c (revision afc98d90)
1 /*
2  * tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
3  *
4  * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5  * This code is placed under the terms of the GNU General Public License v2
6  */
7 
8 #include <linux/i2c.h>
9 #include <linux/slab.h>
10 #include <linux/videodev2.h>
11 #include <linux/delay.h>
12 #include <linux/module.h>
13 #include <media/v4l2-device.h>
14 #include <media/tvp5150.h>
15 #include <media/v4l2-ctrls.h>
16 
17 #include "tvp5150_reg.h"
18 
19 #define TVP5150_H_MAX		720
20 #define TVP5150_V_MAX_525_60	480
21 #define TVP5150_V_MAX_OTHERS	576
22 #define TVP5150_MAX_CROP_LEFT	511
23 #define TVP5150_MAX_CROP_TOP	127
24 #define TVP5150_CROP_SHIFT	2
25 
26 MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
27 MODULE_AUTHOR("Mauro Carvalho Chehab");
28 MODULE_LICENSE("GPL");
29 
30 
31 static int debug;
32 module_param(debug, int, 0);
33 MODULE_PARM_DESC(debug, "Debug level (0-2)");
34 
35 struct tvp5150 {
36 	struct v4l2_subdev sd;
37 	struct v4l2_ctrl_handler hdl;
38 	struct v4l2_rect rect;
39 
40 	v4l2_std_id norm;	/* Current set standard */
41 	u32 input;
42 	u32 output;
43 	int enable;
44 };
45 
46 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
47 {
48 	return container_of(sd, struct tvp5150, sd);
49 }
50 
51 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
52 {
53 	return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
54 }
55 
56 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
57 {
58 	struct i2c_client *c = v4l2_get_subdevdata(sd);
59 	unsigned char buffer[1];
60 	int rc;
61 	struct i2c_msg msg[] = {
62 		{ .addr = c->addr, .flags = 0,
63 		  .buf = &addr, .len = 1 },
64 		{ .addr = c->addr, .flags = I2C_M_RD,
65 		  .buf = buffer, .len = 1 }
66 	};
67 
68 	rc = i2c_transfer(c->adapter, msg, 2);
69 	if (rc < 0 || rc != 2) {
70 		v4l2_err(sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
71 		return rc < 0 ? rc : -EIO;
72 	}
73 
74 	v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
75 
76 	return (buffer[0]);
77 }
78 
79 static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
80 				 unsigned char value)
81 {
82 	struct i2c_client *c = v4l2_get_subdevdata(sd);
83 	unsigned char buffer[2];
84 	int rc;
85 
86 	buffer[0] = addr;
87 	buffer[1] = value;
88 	v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
89 	if (2 != (rc = i2c_master_send(c, buffer, 2)))
90 		v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
91 }
92 
93 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
94 				const u8 end, int max_line)
95 {
96 	int i = 0;
97 
98 	while (init != (u8)(end + 1)) {
99 		if ((i % max_line) == 0) {
100 			if (i > 0)
101 				printk("\n");
102 			printk("tvp5150: %s reg 0x%02x = ", s, init);
103 		}
104 		printk("%02x ", tvp5150_read(sd, init));
105 
106 		init++;
107 		i++;
108 	}
109 	printk("\n");
110 }
111 
112 static int tvp5150_log_status(struct v4l2_subdev *sd)
113 {
114 	printk("tvp5150: Video input source selection #1 = 0x%02x\n",
115 			tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
116 	printk("tvp5150: Analog channel controls = 0x%02x\n",
117 			tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
118 	printk("tvp5150: Operation mode controls = 0x%02x\n",
119 			tvp5150_read(sd, TVP5150_OP_MODE_CTL));
120 	printk("tvp5150: Miscellaneous controls = 0x%02x\n",
121 			tvp5150_read(sd, TVP5150_MISC_CTL));
122 	printk("tvp5150: Autoswitch mask= 0x%02x\n",
123 			tvp5150_read(sd, TVP5150_AUTOSW_MSK));
124 	printk("tvp5150: Color killer threshold control = 0x%02x\n",
125 			tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
126 	printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
127 			tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
128 			tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
129 			tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
130 	printk("tvp5150: Brightness control = 0x%02x\n",
131 			tvp5150_read(sd, TVP5150_BRIGHT_CTL));
132 	printk("tvp5150: Color saturation control = 0x%02x\n",
133 			tvp5150_read(sd, TVP5150_SATURATION_CTL));
134 	printk("tvp5150: Hue control = 0x%02x\n",
135 			tvp5150_read(sd, TVP5150_HUE_CTL));
136 	printk("tvp5150: Contrast control = 0x%02x\n",
137 			tvp5150_read(sd, TVP5150_CONTRAST_CTL));
138 	printk("tvp5150: Outputs and data rates select = 0x%02x\n",
139 			tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
140 	printk("tvp5150: Configuration shared pins = 0x%02x\n",
141 			tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
142 	printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
143 			tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
144 			tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
145 	printk("tvp5150: Active video cropping stop  = 0x%02x%02x\n",
146 			tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
147 			tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
148 	printk("tvp5150: Genlock/RTC = 0x%02x\n",
149 			tvp5150_read(sd, TVP5150_GENLOCK));
150 	printk("tvp5150: Horizontal sync start = 0x%02x\n",
151 			tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
152 	printk("tvp5150: Vertical blanking start = 0x%02x\n",
153 			tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
154 	printk("tvp5150: Vertical blanking stop = 0x%02x\n",
155 			tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
156 	printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
157 			tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
158 			tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
159 	printk("tvp5150: Interrupt reset register B = 0x%02x\n",
160 			tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
161 	printk("tvp5150: Interrupt enable register B = 0x%02x\n",
162 			tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
163 	printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
164 			tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
165 	printk("tvp5150: Video standard = 0x%02x\n",
166 			tvp5150_read(sd, TVP5150_VIDEO_STD));
167 	printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
168 			tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
169 			tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
170 	printk("tvp5150: Macrovision on counter = 0x%02x\n",
171 			tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
172 	printk("tvp5150: Macrovision off counter = 0x%02x\n",
173 			tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
174 	printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
175 			(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
176 	printk("tvp5150: Device ID = %02x%02x\n",
177 			tvp5150_read(sd, TVP5150_MSB_DEV_ID),
178 			tvp5150_read(sd, TVP5150_LSB_DEV_ID));
179 	printk("tvp5150: ROM version = (hex) %02x.%02x\n",
180 			tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
181 			tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
182 	printk("tvp5150: Vertical line count = 0x%02x%02x\n",
183 			tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
184 			tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
185 	printk("tvp5150: Interrupt status register B = 0x%02x\n",
186 			tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
187 	printk("tvp5150: Interrupt active register B = 0x%02x\n",
188 			tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
189 	printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
190 			tvp5150_read(sd, TVP5150_STATUS_REG_1),
191 			tvp5150_read(sd, TVP5150_STATUS_REG_2),
192 			tvp5150_read(sd, TVP5150_STATUS_REG_3),
193 			tvp5150_read(sd, TVP5150_STATUS_REG_4),
194 			tvp5150_read(sd, TVP5150_STATUS_REG_5));
195 
196 	dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
197 			TVP5150_TELETEXT_FIL1_END, 8);
198 	dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
199 			TVP5150_TELETEXT_FIL2_END, 8);
200 
201 	printk("tvp5150: Teletext filter enable = 0x%02x\n",
202 			tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
203 	printk("tvp5150: Interrupt status register A = 0x%02x\n",
204 			tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
205 	printk("tvp5150: Interrupt enable register A = 0x%02x\n",
206 			tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
207 	printk("tvp5150: Interrupt configuration = 0x%02x\n",
208 			tvp5150_read(sd, TVP5150_INT_CONF));
209 	printk("tvp5150: VDP status register = 0x%02x\n",
210 			tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
211 	printk("tvp5150: FIFO word count = 0x%02x\n",
212 			tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
213 	printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
214 			tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
215 	printk("tvp5150: FIFO reset = 0x%02x\n",
216 			tvp5150_read(sd, TVP5150_FIFO_RESET));
217 	printk("tvp5150: Line number interrupt = 0x%02x\n",
218 			tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
219 	printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
220 			tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
221 			tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
222 	printk("tvp5150: FIFO output control = 0x%02x\n",
223 			tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
224 	printk("tvp5150: Full field enable = 0x%02x\n",
225 			tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
226 	printk("tvp5150: Full field mode register = 0x%02x\n",
227 			tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
228 
229 	dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
230 			TVP5150_CC_DATA_END, 8);
231 
232 	dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
233 			TVP5150_WSS_DATA_END, 8);
234 
235 	dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
236 			TVP5150_VPS_DATA_END, 8);
237 
238 	dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
239 			TVP5150_VITC_DATA_END, 10);
240 
241 	dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
242 			TVP5150_LINE_MODE_END, 8);
243 	return 0;
244 }
245 
246 /****************************************************************************
247 			Basic functions
248  ****************************************************************************/
249 
250 static inline void tvp5150_selmux(struct v4l2_subdev *sd)
251 {
252 	int opmode = 0;
253 	struct tvp5150 *decoder = to_tvp5150(sd);
254 	int input = 0;
255 	int val;
256 
257 	if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
258 		input = 8;
259 
260 	switch (decoder->input) {
261 	case TVP5150_COMPOSITE1:
262 		input |= 2;
263 		/* fall through */
264 	case TVP5150_COMPOSITE0:
265 		break;
266 	case TVP5150_SVIDEO:
267 	default:
268 		input |= 1;
269 		break;
270 	}
271 
272 	v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
273 			"=> tvp5150 input=%i, opmode=%i\n",
274 			decoder->input, decoder->output,
275 			input, opmode);
276 
277 	tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
278 	tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
279 
280 	/* Svideo should enable YCrCb output and disable GPCL output
281 	 * For Composite and TV, it should be the reverse
282 	 */
283 	val = tvp5150_read(sd, TVP5150_MISC_CTL);
284 	if (val < 0) {
285 		v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
286 		return;
287 	}
288 
289 	if (decoder->input == TVP5150_SVIDEO)
290 		val = (val & ~0x40) | 0x10;
291 	else
292 		val = (val & ~0x10) | 0x40;
293 	tvp5150_write(sd, TVP5150_MISC_CTL, val);
294 };
295 
296 struct i2c_reg_value {
297 	unsigned char reg;
298 	unsigned char value;
299 };
300 
301 /* Default values as sugested at TVP5150AM1 datasheet */
302 static const struct i2c_reg_value tvp5150_init_default[] = {
303 	{ /* 0x00 */
304 		TVP5150_VD_IN_SRC_SEL_1,0x00
305 	},
306 	{ /* 0x01 */
307 		TVP5150_ANAL_CHL_CTL,0x15
308 	},
309 	{ /* 0x02 */
310 		TVP5150_OP_MODE_CTL,0x00
311 	},
312 	{ /* 0x03 */
313 		TVP5150_MISC_CTL,0x01
314 	},
315 	{ /* 0x06 */
316 		TVP5150_COLOR_KIL_THSH_CTL,0x10
317 	},
318 	{ /* 0x07 */
319 		TVP5150_LUMA_PROC_CTL_1,0x60
320 	},
321 	{ /* 0x08 */
322 		TVP5150_LUMA_PROC_CTL_2,0x00
323 	},
324 	{ /* 0x09 */
325 		TVP5150_BRIGHT_CTL,0x80
326 	},
327 	{ /* 0x0a */
328 		TVP5150_SATURATION_CTL,0x80
329 	},
330 	{ /* 0x0b */
331 		TVP5150_HUE_CTL,0x00
332 	},
333 	{ /* 0x0c */
334 		TVP5150_CONTRAST_CTL,0x80
335 	},
336 	{ /* 0x0d */
337 		TVP5150_DATA_RATE_SEL,0x47
338 	},
339 	{ /* 0x0e */
340 		TVP5150_LUMA_PROC_CTL_3,0x00
341 	},
342 	{ /* 0x0f */
343 		TVP5150_CONF_SHARED_PIN,0x08
344 	},
345 	{ /* 0x11 */
346 		TVP5150_ACT_VD_CROP_ST_MSB,0x00
347 	},
348 	{ /* 0x12 */
349 		TVP5150_ACT_VD_CROP_ST_LSB,0x00
350 	},
351 	{ /* 0x13 */
352 		TVP5150_ACT_VD_CROP_STP_MSB,0x00
353 	},
354 	{ /* 0x14 */
355 		TVP5150_ACT_VD_CROP_STP_LSB,0x00
356 	},
357 	{ /* 0x15 */
358 		TVP5150_GENLOCK,0x01
359 	},
360 	{ /* 0x16 */
361 		TVP5150_HORIZ_SYNC_START,0x80
362 	},
363 	{ /* 0x18 */
364 		TVP5150_VERT_BLANKING_START,0x00
365 	},
366 	{ /* 0x19 */
367 		TVP5150_VERT_BLANKING_STOP,0x00
368 	},
369 	{ /* 0x1a */
370 		TVP5150_CHROMA_PROC_CTL_1,0x0c
371 	},
372 	{ /* 0x1b */
373 		TVP5150_CHROMA_PROC_CTL_2,0x14
374 	},
375 	{ /* 0x1c */
376 		TVP5150_INT_RESET_REG_B,0x00
377 	},
378 	{ /* 0x1d */
379 		TVP5150_INT_ENABLE_REG_B,0x00
380 	},
381 	{ /* 0x1e */
382 		TVP5150_INTT_CONFIG_REG_B,0x00
383 	},
384 	{ /* 0x28 */
385 		TVP5150_VIDEO_STD,0x00
386 	},
387 	{ /* 0x2e */
388 		TVP5150_MACROVISION_ON_CTR,0x0f
389 	},
390 	{ /* 0x2f */
391 		TVP5150_MACROVISION_OFF_CTR,0x01
392 	},
393 	{ /* 0xbb */
394 		TVP5150_TELETEXT_FIL_ENA,0x00
395 	},
396 	{ /* 0xc0 */
397 		TVP5150_INT_STATUS_REG_A,0x00
398 	},
399 	{ /* 0xc1 */
400 		TVP5150_INT_ENABLE_REG_A,0x00
401 	},
402 	{ /* 0xc2 */
403 		TVP5150_INT_CONF,0x04
404 	},
405 	{ /* 0xc8 */
406 		TVP5150_FIFO_INT_THRESHOLD,0x80
407 	},
408 	{ /* 0xc9 */
409 		TVP5150_FIFO_RESET,0x00
410 	},
411 	{ /* 0xca */
412 		TVP5150_LINE_NUMBER_INT,0x00
413 	},
414 	{ /* 0xcb */
415 		TVP5150_PIX_ALIGN_REG_LOW,0x4e
416 	},
417 	{ /* 0xcc */
418 		TVP5150_PIX_ALIGN_REG_HIGH,0x00
419 	},
420 	{ /* 0xcd */
421 		TVP5150_FIFO_OUT_CTRL,0x01
422 	},
423 	{ /* 0xcf */
424 		TVP5150_FULL_FIELD_ENA,0x00
425 	},
426 	{ /* 0xd0 */
427 		TVP5150_LINE_MODE_INI,0x00
428 	},
429 	{ /* 0xfc */
430 		TVP5150_FULL_FIELD_MODE_REG,0x7f
431 	},
432 	{ /* end of data */
433 		0xff,0xff
434 	}
435 };
436 
437 /* Default values as sugested at TVP5150AM1 datasheet */
438 static const struct i2c_reg_value tvp5150_init_enable[] = {
439 	{
440 		TVP5150_CONF_SHARED_PIN, 2
441 	},{	/* Automatic offset and AGC enabled */
442 		TVP5150_ANAL_CHL_CTL, 0x15
443 	},{	/* Activate YCrCb output 0x9 or 0xd ? */
444 		TVP5150_MISC_CTL, 0x6f
445 	},{	/* Activates video std autodetection for all standards */
446 		TVP5150_AUTOSW_MSK, 0x0
447 	},{	/* Default format: 0x47. For 4:2:2: 0x40 */
448 		TVP5150_DATA_RATE_SEL, 0x47
449 	},{
450 		TVP5150_CHROMA_PROC_CTL_1, 0x0c
451 	},{
452 		TVP5150_CHROMA_PROC_CTL_2, 0x54
453 	},{	/* Non documented, but initialized on WinTV USB2 */
454 		0x27, 0x20
455 	},{
456 		0xff,0xff
457 	}
458 };
459 
460 struct tvp5150_vbi_type {
461 	unsigned int vbi_type;
462 	unsigned int ini_line;
463 	unsigned int end_line;
464 	unsigned int by_field :1;
465 };
466 
467 struct i2c_vbi_ram_value {
468 	u16 reg;
469 	struct tvp5150_vbi_type type;
470 	unsigned char values[16];
471 };
472 
473 /* This struct have the values for each supported VBI Standard
474  * by
475  tvp5150_vbi_types should follow the same order as vbi_ram_default
476  * value 0 means rom position 0x10, value 1 means rom position 0x30
477  * and so on. There are 16 possible locations from 0 to 15.
478  */
479 
480 static struct i2c_vbi_ram_value vbi_ram_default[] =
481 {
482 	/* FIXME: Current api doesn't handle all VBI types, those not
483 	   yet supported are placed under #if 0 */
484 #if 0
485 	{0x010, /* Teletext, SECAM, WST System A */
486 		{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
487 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
488 		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
489 	},
490 #endif
491 	{0x030, /* Teletext, PAL, WST System B */
492 		{V4L2_SLICED_TELETEXT_B,6,22,1},
493 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
494 		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
495 	},
496 #if 0
497 	{0x050, /* Teletext, PAL, WST System C */
498 		{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
499 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
500 		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
501 	},
502 	{0x070, /* Teletext, NTSC, WST System B */
503 		{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
504 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
505 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
506 	},
507 	{0x090, /* Tetetext, NTSC NABTS System C */
508 		{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
509 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
510 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
511 	},
512 	{0x0b0, /* Teletext, NTSC-J, NABTS System D */
513 		{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
514 		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
515 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
516 	},
517 	{0x0d0, /* Closed Caption, PAL/SECAM */
518 		{V4L2_SLICED_CAPTION_625,22,22,1},
519 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
520 		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
521 	},
522 #endif
523 	{0x0f0, /* Closed Caption, NTSC */
524 		{V4L2_SLICED_CAPTION_525,21,21,1},
525 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
526 		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
527 	},
528 	{0x110, /* Wide Screen Signal, PAL/SECAM */
529 		{V4L2_SLICED_WSS_625,23,23,1},
530 		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
531 		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
532 	},
533 #if 0
534 	{0x130, /* Wide Screen Signal, NTSC C */
535 		{V4L2_SLICED_WSS_525,20,20,1},
536 		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
537 		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
538 	},
539 	{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
540 		{V4l2_SLICED_VITC_625,6,22,0},
541 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
542 		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
543 	},
544 	{0x170, /* Vertical Interval Timecode (VITC), NTSC */
545 		{V4l2_SLICED_VITC_525,10,20,0},
546 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
547 		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
548 	},
549 #endif
550 	{0x190, /* Video Program System (VPS), PAL */
551 		{V4L2_SLICED_VPS,16,16,0},
552 		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
553 		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
554 	},
555 	/* 0x1d0 User programmable */
556 
557 	/* End of struct */
558 	{ (u16)-1 }
559 };
560 
561 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
562 				const struct i2c_reg_value *regs)
563 {
564 	while (regs->reg != 0xff) {
565 		tvp5150_write(sd, regs->reg, regs->value);
566 		regs++;
567 	}
568 	return 0;
569 }
570 
571 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
572 				const struct i2c_vbi_ram_value *regs)
573 {
574 	unsigned int i;
575 
576 	/* Disable Full Field */
577 	tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
578 
579 	/* Before programming, Line mode should be at 0xff */
580 	for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
581 		tvp5150_write(sd, i, 0xff);
582 
583 	/* Load Ram Table */
584 	while (regs->reg != (u16)-1) {
585 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
586 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
587 
588 		for (i = 0; i < 16; i++)
589 			tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
590 
591 		regs++;
592 	}
593 	return 0;
594 }
595 
596 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
597 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
598 				struct v4l2_sliced_vbi_cap *cap)
599 {
600 	const struct i2c_vbi_ram_value *regs = vbi_ram_default;
601 	int line;
602 
603 	v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
604 	memset(cap, 0, sizeof *cap);
605 
606 	while (regs->reg != (u16)-1 ) {
607 		for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
608 			cap->service_lines[0][line] |= regs->type.vbi_type;
609 		}
610 		cap->service_set |= regs->type.vbi_type;
611 
612 		regs++;
613 	}
614 	return 0;
615 }
616 
617 /* Set vbi processing
618  * type - one of tvp5150_vbi_types
619  * line - line to gather data
620  * fields: bit 0 field1, bit 1, field2
621  * flags (default=0xf0) is a bitmask, were set means:
622  *	bit 7: enable filtering null bytes on CC
623  *	bit 6: send data also to FIFO
624  *	bit 5: don't allow data with errors on FIFO
625  *	bit 4: enable ECC when possible
626  * pix_align = pix alignment:
627  *	LSB = field1
628  *	MSB = field2
629  */
630 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
631 			const struct i2c_vbi_ram_value *regs,
632 			unsigned int type,u8 flags, int line,
633 			const int fields)
634 {
635 	struct tvp5150 *decoder = to_tvp5150(sd);
636 	v4l2_std_id std = decoder->norm;
637 	u8 reg;
638 	int pos=0;
639 
640 	if (std == V4L2_STD_ALL) {
641 		v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
642 		return 0;
643 	} else if (std & V4L2_STD_625_50) {
644 		/* Don't follow NTSC Line number convension */
645 		line += 3;
646 	}
647 
648 	if (line<6||line>27)
649 		return 0;
650 
651 	while (regs->reg != (u16)-1 ) {
652 		if ((type & regs->type.vbi_type) &&
653 		    (line>=regs->type.ini_line) &&
654 		    (line<=regs->type.end_line)) {
655 			type=regs->type.vbi_type;
656 			break;
657 		}
658 
659 		regs++;
660 		pos++;
661 	}
662 	if (regs->reg == (u16)-1)
663 		return 0;
664 
665 	type=pos | (flags & 0xf0);
666 	reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
667 
668 	if (fields&1) {
669 		tvp5150_write(sd, reg, type);
670 	}
671 
672 	if (fields&2) {
673 		tvp5150_write(sd, reg+1, type);
674 	}
675 
676 	return type;
677 }
678 
679 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
680 			const struct i2c_vbi_ram_value *regs, int line)
681 {
682 	struct tvp5150 *decoder = to_tvp5150(sd);
683 	v4l2_std_id std = decoder->norm;
684 	u8 reg;
685 	int pos, type = 0;
686 	int i, ret = 0;
687 
688 	if (std == V4L2_STD_ALL) {
689 		v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
690 		return 0;
691 	} else if (std & V4L2_STD_625_50) {
692 		/* Don't follow NTSC Line number convension */
693 		line += 3;
694 	}
695 
696 	if (line < 6 || line > 27)
697 		return 0;
698 
699 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
700 
701 	for (i = 0; i <= 1; i++) {
702 		ret = tvp5150_read(sd, reg + i);
703 		if (ret < 0) {
704 			v4l2_err(sd, "%s: failed with error = %d\n",
705 				 __func__, ret);
706 			return 0;
707 		}
708 		pos = ret & 0x0f;
709 		if (pos < 0x0f)
710 			type |= regs[pos].type.vbi_type;
711 	}
712 
713 	return type;
714 }
715 
716 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
717 {
718 	struct tvp5150 *decoder = to_tvp5150(sd);
719 	int fmt = 0;
720 
721 	decoder->norm = std;
722 
723 	/* First tests should be against specific std */
724 
725 	if (std == V4L2_STD_NTSC_443) {
726 		fmt = VIDEO_STD_NTSC_4_43_BIT;
727 	} else if (std == V4L2_STD_PAL_M) {
728 		fmt = VIDEO_STD_PAL_M_BIT;
729 	} else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
730 		fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
731 	} else {
732 		/* Then, test against generic ones */
733 		if (std & V4L2_STD_NTSC)
734 			fmt = VIDEO_STD_NTSC_MJ_BIT;
735 		else if (std & V4L2_STD_PAL)
736 			fmt = VIDEO_STD_PAL_BDGHIN_BIT;
737 		else if (std & V4L2_STD_SECAM)
738 			fmt = VIDEO_STD_SECAM_BIT;
739 	}
740 
741 	v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
742 	tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
743 	return 0;
744 }
745 
746 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
747 {
748 	struct tvp5150 *decoder = to_tvp5150(sd);
749 
750 	if (decoder->norm == std)
751 		return 0;
752 
753 	/* Change cropping height limits */
754 	if (std & V4L2_STD_525_60)
755 		decoder->rect.height = TVP5150_V_MAX_525_60;
756 	else
757 		decoder->rect.height = TVP5150_V_MAX_OTHERS;
758 
759 
760 	return tvp5150_set_std(sd, std);
761 }
762 
763 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
764 {
765 	struct tvp5150 *decoder = to_tvp5150(sd);
766 
767 	/* Initializes TVP5150 to its default values */
768 	tvp5150_write_inittab(sd, tvp5150_init_default);
769 
770 	/* Initializes VDP registers */
771 	tvp5150_vdp_init(sd, vbi_ram_default);
772 
773 	/* Selects decoder input */
774 	tvp5150_selmux(sd);
775 
776 	/* Initializes TVP5150 to stream enabled values */
777 	tvp5150_write_inittab(sd, tvp5150_init_enable);
778 
779 	/* Initialize image preferences */
780 	v4l2_ctrl_handler_setup(&decoder->hdl);
781 
782 	tvp5150_set_std(sd, decoder->norm);
783 	return 0;
784 };
785 
786 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
787 {
788 	struct v4l2_subdev *sd = to_sd(ctrl);
789 
790 	switch (ctrl->id) {
791 	case V4L2_CID_BRIGHTNESS:
792 		tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
793 		return 0;
794 	case V4L2_CID_CONTRAST:
795 		tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
796 		return 0;
797 	case V4L2_CID_SATURATION:
798 		tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
799 		return 0;
800 	case V4L2_CID_HUE:
801 		tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
802 		return 0;
803 	}
804 	return -EINVAL;
805 }
806 
807 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
808 {
809 	int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
810 
811 	switch (val & 0x0F) {
812 	case 0x01:
813 		return V4L2_STD_NTSC;
814 	case 0x03:
815 		return V4L2_STD_PAL;
816 	case 0x05:
817 		return V4L2_STD_PAL_M;
818 	case 0x07:
819 		return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
820 	case 0x09:
821 		return V4L2_STD_NTSC_443;
822 	case 0xb:
823 		return V4L2_STD_SECAM;
824 	default:
825 		return V4L2_STD_UNKNOWN;
826 	}
827 }
828 
829 static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
830 						enum v4l2_mbus_pixelcode *code)
831 {
832 	if (index)
833 		return -EINVAL;
834 
835 	*code = V4L2_MBUS_FMT_UYVY8_2X8;
836 	return 0;
837 }
838 
839 static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
840 			    struct v4l2_mbus_framefmt *f)
841 {
842 	struct tvp5150 *decoder = to_tvp5150(sd);
843 
844 	if (f == NULL)
845 		return -EINVAL;
846 
847 	tvp5150_reset(sd, 0);
848 
849 	f->width = decoder->rect.width;
850 	f->height = decoder->rect.height;
851 
852 	f->code = V4L2_MBUS_FMT_UYVY8_2X8;
853 	f->field = V4L2_FIELD_SEQ_TB;
854 	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
855 
856 	v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
857 			f->height);
858 	return 0;
859 }
860 
861 static int tvp5150_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a)
862 {
863 	struct v4l2_rect rect = a->c;
864 	struct tvp5150 *decoder = to_tvp5150(sd);
865 	v4l2_std_id std;
866 	unsigned int hmax;
867 
868 	v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
869 		__func__, rect.left, rect.top, rect.width, rect.height);
870 
871 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
872 		return -EINVAL;
873 
874 	/* tvp5150 has some special limits */
875 	rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
876 	rect.width = clamp_t(unsigned int, rect.width,
877 			     TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
878 			     TVP5150_H_MAX - rect.left);
879 	rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
880 
881 	/* Calculate height based on current standard */
882 	if (decoder->norm == V4L2_STD_ALL)
883 		std = tvp5150_read_std(sd);
884 	else
885 		std = decoder->norm;
886 
887 	if (std & V4L2_STD_525_60)
888 		hmax = TVP5150_V_MAX_525_60;
889 	else
890 		hmax = TVP5150_V_MAX_OTHERS;
891 
892 	rect.height = clamp_t(unsigned int, rect.height,
893 			      hmax - TVP5150_MAX_CROP_TOP - rect.top,
894 			      hmax - rect.top);
895 
896 	tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
897 	tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
898 		      rect.top + rect.height - hmax);
899 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
900 		      rect.left >> TVP5150_CROP_SHIFT);
901 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
902 		      rect.left | (1 << TVP5150_CROP_SHIFT));
903 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
904 		      (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
905 		      TVP5150_CROP_SHIFT);
906 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
907 		      rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
908 
909 	decoder->rect = rect;
910 
911 	return 0;
912 }
913 
914 static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
915 {
916 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
917 
918 	a->c	= decoder->rect;
919 	a->type	= V4L2_BUF_TYPE_VIDEO_CAPTURE;
920 
921 	return 0;
922 }
923 
924 static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
925 {
926 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
927 	v4l2_std_id std;
928 
929 	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
930 		return -EINVAL;
931 
932 	a->bounds.left			= 0;
933 	a->bounds.top			= 0;
934 	a->bounds.width			= TVP5150_H_MAX;
935 
936 	/* Calculate height based on current standard */
937 	if (decoder->norm == V4L2_STD_ALL)
938 		std = tvp5150_read_std(sd);
939 	else
940 		std = decoder->norm;
941 
942 	if (std & V4L2_STD_525_60)
943 		a->bounds.height = TVP5150_V_MAX_525_60;
944 	else
945 		a->bounds.height = TVP5150_V_MAX_OTHERS;
946 
947 	a->defrect			= a->bounds;
948 	a->pixelaspect.numerator	= 1;
949 	a->pixelaspect.denominator	= 1;
950 
951 	return 0;
952 }
953 
954 /****************************************************************************
955 			I2C Command
956  ****************************************************************************/
957 
958 static int tvp5150_s_routing(struct v4l2_subdev *sd,
959 			     u32 input, u32 output, u32 config)
960 {
961 	struct tvp5150 *decoder = to_tvp5150(sd);
962 
963 	decoder->input = input;
964 	decoder->output = output;
965 	tvp5150_selmux(sd);
966 	return 0;
967 }
968 
969 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
970 {
971 	/* this is for capturing 36 raw vbi lines
972 	   if there's a way to cut off the beginning 2 vbi lines
973 	   with the tvp5150 then the vbi line count could be lowered
974 	   to 17 lines/field again, although I couldn't find a register
975 	   which could do that cropping */
976 	if (fmt->sample_format == V4L2_PIX_FMT_GREY)
977 		tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
978 	if (fmt->count[0] == 18 && fmt->count[1] == 18) {
979 		tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
980 		tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
981 	}
982 	return 0;
983 }
984 
985 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
986 {
987 	int i;
988 
989 	if (svbi->service_set != 0) {
990 		for (i = 0; i <= 23; i++) {
991 			svbi->service_lines[1][i] = 0;
992 			svbi->service_lines[0][i] =
993 				tvp5150_set_vbi(sd, vbi_ram_default,
994 				       svbi->service_lines[0][i], 0xf0, i, 3);
995 		}
996 		/* Enables FIFO */
997 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
998 	} else {
999 		/* Disables FIFO*/
1000 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
1001 
1002 		/* Disable Full Field */
1003 		tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
1004 
1005 		/* Disable Line modes */
1006 		for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1007 			tvp5150_write(sd, i, 0xff);
1008 	}
1009 	return 0;
1010 }
1011 
1012 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1013 {
1014 	int i, mask = 0;
1015 
1016 	memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1017 
1018 	for (i = 0; i <= 23; i++) {
1019 		svbi->service_lines[0][i] =
1020 			tvp5150_get_vbi(sd, vbi_ram_default, i);
1021 		mask |= svbi->service_lines[0][i];
1022 	}
1023 	svbi->service_set = mask;
1024 	return 0;
1025 }
1026 
1027 #ifdef CONFIG_VIDEO_ADV_DEBUG
1028 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1029 {
1030 	int res;
1031 
1032 	res = tvp5150_read(sd, reg->reg & 0xff);
1033 	if (res < 0) {
1034 		v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
1035 		return res;
1036 	}
1037 
1038 	reg->val = res;
1039 	reg->size = 1;
1040 	return 0;
1041 }
1042 
1043 static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1044 {
1045 	tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1046 	return 0;
1047 }
1048 #endif
1049 
1050 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1051 {
1052 	int status = tvp5150_read(sd, 0x88);
1053 
1054 	vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1055 	return 0;
1056 }
1057 
1058 /* ----------------------------------------------------------------------- */
1059 
1060 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1061 	.s_ctrl = tvp5150_s_ctrl,
1062 };
1063 
1064 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1065 	.log_status = tvp5150_log_status,
1066 	.s_std = tvp5150_s_std,
1067 	.reset = tvp5150_reset,
1068 #ifdef CONFIG_VIDEO_ADV_DEBUG
1069 	.g_register = tvp5150_g_register,
1070 	.s_register = tvp5150_s_register,
1071 #endif
1072 };
1073 
1074 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1075 	.g_tuner = tvp5150_g_tuner,
1076 };
1077 
1078 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1079 	.s_routing = tvp5150_s_routing,
1080 	.enum_mbus_fmt = tvp5150_enum_mbus_fmt,
1081 	.s_mbus_fmt = tvp5150_mbus_fmt,
1082 	.try_mbus_fmt = tvp5150_mbus_fmt,
1083 	.g_mbus_fmt = tvp5150_mbus_fmt,
1084 	.s_crop = tvp5150_s_crop,
1085 	.g_crop = tvp5150_g_crop,
1086 	.cropcap = tvp5150_cropcap,
1087 };
1088 
1089 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1090 	.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1091 	.g_sliced_fmt = tvp5150_g_sliced_fmt,
1092 	.s_sliced_fmt = tvp5150_s_sliced_fmt,
1093 	.s_raw_fmt = tvp5150_s_raw_fmt,
1094 };
1095 
1096 static const struct v4l2_subdev_ops tvp5150_ops = {
1097 	.core = &tvp5150_core_ops,
1098 	.tuner = &tvp5150_tuner_ops,
1099 	.video = &tvp5150_video_ops,
1100 	.vbi = &tvp5150_vbi_ops,
1101 };
1102 
1103 
1104 /****************************************************************************
1105 			I2C Client & Driver
1106  ****************************************************************************/
1107 
1108 static int tvp5150_probe(struct i2c_client *c,
1109 			 const struct i2c_device_id *id)
1110 {
1111 	struct tvp5150 *core;
1112 	struct v4l2_subdev *sd;
1113 	int tvp5150_id[4];
1114 	int i, res;
1115 
1116 	/* Check if the adapter supports the needed features */
1117 	if (!i2c_check_functionality(c->adapter,
1118 	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1119 		return -EIO;
1120 
1121 	core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
1122 	if (!core)
1123 		return -ENOMEM;
1124 	sd = &core->sd;
1125 	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1126 
1127 	/*
1128 	 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1129 	 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
1130 	 */
1131 	for (i = 0; i < 4; i++) {
1132 		res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
1133 		if (res < 0)
1134 			return res;
1135 		tvp5150_id[i] = res;
1136 	}
1137 
1138 	v4l_info(c, "chip found @ 0x%02x (%s)\n",
1139 		 c->addr << 1, c->adapter->name);
1140 
1141 	if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */
1142 		v4l2_info(sd, "tvp%02x%02xam1 detected.\n",
1143 			  tvp5150_id[0], tvp5150_id[1]);
1144 
1145 		/* ITU-T BT.656.4 timing */
1146 		tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1147 	} else {
1148 		/* Is TVP5150A */
1149 		if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) {
1150 			v4l2_info(sd, "tvp%02x%02xa detected.\n",
1151 				  tvp5150_id[2], tvp5150_id[3]);
1152 		} else {
1153 			v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
1154 				  tvp5150_id[2], tvp5150_id[3]);
1155 			v4l2_info(sd, "*** Rom ver is %d.%d\n",
1156 				  tvp5150_id[2], tvp5150_id[3]);
1157 		}
1158 	}
1159 
1160 	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
1161 	core->input = TVP5150_COMPOSITE1;
1162 	core->enable = 1;
1163 
1164 	v4l2_ctrl_handler_init(&core->hdl, 4);
1165 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1166 			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1167 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1168 			V4L2_CID_CONTRAST, 0, 255, 1, 128);
1169 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1170 			V4L2_CID_SATURATION, 0, 255, 1, 128);
1171 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1172 			V4L2_CID_HUE, -128, 127, 1, 0);
1173 	sd->ctrl_handler = &core->hdl;
1174 	if (core->hdl.error) {
1175 		res = core->hdl.error;
1176 		v4l2_ctrl_handler_free(&core->hdl);
1177 		return res;
1178 	}
1179 	v4l2_ctrl_handler_setup(&core->hdl);
1180 
1181 	/* Default is no cropping */
1182 	core->rect.top = 0;
1183 	if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1184 		core->rect.height = TVP5150_V_MAX_525_60;
1185 	else
1186 		core->rect.height = TVP5150_V_MAX_OTHERS;
1187 	core->rect.left = 0;
1188 	core->rect.width = TVP5150_H_MAX;
1189 
1190 	if (debug > 1)
1191 		tvp5150_log_status(sd);
1192 	return 0;
1193 }
1194 
1195 static int tvp5150_remove(struct i2c_client *c)
1196 {
1197 	struct v4l2_subdev *sd = i2c_get_clientdata(c);
1198 	struct tvp5150 *decoder = to_tvp5150(sd);
1199 
1200 	v4l2_dbg(1, debug, sd,
1201 		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1202 		c->addr << 1);
1203 
1204 	v4l2_device_unregister_subdev(sd);
1205 	v4l2_ctrl_handler_free(&decoder->hdl);
1206 	return 0;
1207 }
1208 
1209 /* ----------------------------------------------------------------------- */
1210 
1211 static const struct i2c_device_id tvp5150_id[] = {
1212 	{ "tvp5150", 0 },
1213 	{ }
1214 };
1215 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1216 
1217 static struct i2c_driver tvp5150_driver = {
1218 	.driver = {
1219 		.owner	= THIS_MODULE,
1220 		.name	= "tvp5150",
1221 	},
1222 	.probe		= tvp5150_probe,
1223 	.remove		= tvp5150_remove,
1224 	.id_table	= tvp5150_id,
1225 };
1226 
1227 module_i2c_driver(tvp5150_driver);
1228