xref: /openbmc/linux/drivers/media/i2c/tvp5150.c (revision 74ce1896)
1 /*
2  * tvp5150 - Texas Instruments TVP5150A/AM1 and TVP5151 video decoder driver
3  *
4  * Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
5  * This code is placed under the terms of the GNU General Public License v2
6  */
7 
8 #include <dt-bindings/media/tvp5150.h>
9 #include <linux/i2c.h>
10 #include <linux/slab.h>
11 #include <linux/videodev2.h>
12 #include <linux/delay.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/module.h>
15 #include <linux/of_graph.h>
16 #include <media/v4l2-async.h>
17 #include <media/v4l2-device.h>
18 #include <media/v4l2-ctrls.h>
19 #include <media/v4l2-fwnode.h>
20 #include <media/v4l2-mc.h>
21 
22 #include "tvp5150_reg.h"
23 
24 #define TVP5150_H_MAX		720U
25 #define TVP5150_V_MAX_525_60	480U
26 #define TVP5150_V_MAX_OTHERS	576U
27 #define TVP5150_MAX_CROP_LEFT	511
28 #define TVP5150_MAX_CROP_TOP	127
29 #define TVP5150_CROP_SHIFT	2
30 
31 MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
32 MODULE_AUTHOR("Mauro Carvalho Chehab");
33 MODULE_LICENSE("GPL");
34 
35 
36 static int debug;
37 module_param(debug, int, 0644);
38 MODULE_PARM_DESC(debug, "Debug level (0-2)");
39 
40 #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
41 
42 struct tvp5150 {
43 	struct v4l2_subdev sd;
44 #ifdef CONFIG_MEDIA_CONTROLLER
45 	struct media_pad pads[DEMOD_NUM_PADS];
46 	struct media_entity input_ent[TVP5150_INPUT_NUM];
47 	struct media_pad input_pad[TVP5150_INPUT_NUM];
48 #endif
49 	struct v4l2_ctrl_handler hdl;
50 	struct v4l2_rect rect;
51 
52 	v4l2_std_id norm;	/* Current set standard */
53 	u32 input;
54 	u32 output;
55 	int enable;
56 
57 	u16 dev_id;
58 	u16 rom_ver;
59 
60 	enum v4l2_mbus_type mbus_type;
61 };
62 
63 static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
64 {
65 	return container_of(sd, struct tvp5150, sd);
66 }
67 
68 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
69 {
70 	return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
71 }
72 
73 static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
74 {
75 	struct i2c_client *c = v4l2_get_subdevdata(sd);
76 	int rc;
77 
78 	rc = i2c_smbus_read_byte_data(c, addr);
79 	if (rc < 0) {
80 		dev_err(sd->dev, "i2c i/o error: rc == %d\n", rc);
81 		return rc;
82 	}
83 
84 	dev_dbg_lvl(sd->dev, 2, debug, "tvp5150: read 0x%02x = %02x\n", addr, rc);
85 
86 	return rc;
87 }
88 
89 static int tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
90 				 unsigned char value)
91 {
92 	struct i2c_client *c = v4l2_get_subdevdata(sd);
93 	int rc;
94 
95 	dev_dbg_lvl(sd->dev, 2, debug, "tvp5150: writing %02x %02x\n", addr, value);
96 	rc = i2c_smbus_write_byte_data(c, addr, value);
97 	if (rc < 0)
98 		dev_err(sd->dev, "i2c i/o error: rc == %d\n", rc);
99 
100 	return rc;
101 }
102 
103 static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
104 				const u8 end, int max_line)
105 {
106 	u8 buf[16];
107 	int i = 0, j, len;
108 
109 	if (max_line > 16) {
110 		dprintk0(sd->dev, "too much data to dump\n");
111 		return;
112 	}
113 
114 	for (i = init; i < end; i += max_line) {
115 		len = (end - i > max_line) ? max_line : end - i;
116 
117 		for (j = 0; j < len; j++)
118 			buf[j] = tvp5150_read(sd, i + j);
119 
120 		dprintk0(sd->dev, "%s reg %02x = %*ph\n", s, i, len, buf);
121 	}
122 }
123 
124 static int tvp5150_log_status(struct v4l2_subdev *sd)
125 {
126 	dprintk0(sd->dev, "tvp5150: Video input source selection #1 = 0x%02x\n",
127 		tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
128 	dprintk0(sd->dev, "tvp5150: Analog channel controls = 0x%02x\n",
129 		tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
130 	dprintk0(sd->dev, "tvp5150: Operation mode controls = 0x%02x\n",
131 		tvp5150_read(sd, TVP5150_OP_MODE_CTL));
132 	dprintk0(sd->dev, "tvp5150: Miscellaneous controls = 0x%02x\n",
133 		tvp5150_read(sd, TVP5150_MISC_CTL));
134 	dprintk0(sd->dev, "tvp5150: Autoswitch mask= 0x%02x\n",
135 		tvp5150_read(sd, TVP5150_AUTOSW_MSK));
136 	dprintk0(sd->dev, "tvp5150: Color killer threshold control = 0x%02x\n",
137 		tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
138 	dprintk0(sd->dev, "tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
139 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
140 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
141 		tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
142 	dprintk0(sd->dev, "tvp5150: Brightness control = 0x%02x\n",
143 		tvp5150_read(sd, TVP5150_BRIGHT_CTL));
144 	dprintk0(sd->dev, "tvp5150: Color saturation control = 0x%02x\n",
145 		tvp5150_read(sd, TVP5150_SATURATION_CTL));
146 	dprintk0(sd->dev, "tvp5150: Hue control = 0x%02x\n",
147 		tvp5150_read(sd, TVP5150_HUE_CTL));
148 	dprintk0(sd->dev, "tvp5150: Contrast control = 0x%02x\n",
149 		tvp5150_read(sd, TVP5150_CONTRAST_CTL));
150 	dprintk0(sd->dev, "tvp5150: Outputs and data rates select = 0x%02x\n",
151 		tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
152 	dprintk0(sd->dev, "tvp5150: Configuration shared pins = 0x%02x\n",
153 		tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
154 	dprintk0(sd->dev, "tvp5150: Active video cropping start = 0x%02x%02x\n",
155 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
156 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
157 	dprintk0(sd->dev, "tvp5150: Active video cropping stop  = 0x%02x%02x\n",
158 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
159 		tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
160 	dprintk0(sd->dev, "tvp5150: Genlock/RTC = 0x%02x\n",
161 		tvp5150_read(sd, TVP5150_GENLOCK));
162 	dprintk0(sd->dev, "tvp5150: Horizontal sync start = 0x%02x\n",
163 		tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
164 	dprintk0(sd->dev, "tvp5150: Vertical blanking start = 0x%02x\n",
165 		tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
166 	dprintk0(sd->dev, "tvp5150: Vertical blanking stop = 0x%02x\n",
167 		tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
168 	dprintk0(sd->dev, "tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
169 		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
170 		tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
171 	dprintk0(sd->dev, "tvp5150: Interrupt reset register B = 0x%02x\n",
172 		tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
173 	dprintk0(sd->dev, "tvp5150: Interrupt enable register B = 0x%02x\n",
174 		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
175 	dprintk0(sd->dev, "tvp5150: Interrupt configuration register B = 0x%02x\n",
176 		tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
177 	dprintk0(sd->dev, "tvp5150: Video standard = 0x%02x\n",
178 		tvp5150_read(sd, TVP5150_VIDEO_STD));
179 	dprintk0(sd->dev, "tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
180 		tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
181 		tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
182 	dprintk0(sd->dev, "tvp5150: Macrovision on counter = 0x%02x\n",
183 		tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
184 	dprintk0(sd->dev, "tvp5150: Macrovision off counter = 0x%02x\n",
185 		tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
186 	dprintk0(sd->dev, "tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
187 		(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
188 	dprintk0(sd->dev, "tvp5150: Device ID = %02x%02x\n",
189 		tvp5150_read(sd, TVP5150_MSB_DEV_ID),
190 		tvp5150_read(sd, TVP5150_LSB_DEV_ID));
191 	dprintk0(sd->dev, "tvp5150: ROM version = (hex) %02x.%02x\n",
192 		tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
193 		tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
194 	dprintk0(sd->dev, "tvp5150: Vertical line count = 0x%02x%02x\n",
195 		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
196 		tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
197 	dprintk0(sd->dev, "tvp5150: Interrupt status register B = 0x%02x\n",
198 		tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
199 	dprintk0(sd->dev, "tvp5150: Interrupt active register B = 0x%02x\n",
200 		tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
201 	dprintk0(sd->dev, "tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
202 		tvp5150_read(sd, TVP5150_STATUS_REG_1),
203 		tvp5150_read(sd, TVP5150_STATUS_REG_2),
204 		tvp5150_read(sd, TVP5150_STATUS_REG_3),
205 		tvp5150_read(sd, TVP5150_STATUS_REG_4),
206 		tvp5150_read(sd, TVP5150_STATUS_REG_5));
207 
208 	dump_reg_range(sd, "Teletext filter 1",   TVP5150_TELETEXT_FIL1_INI,
209 			TVP5150_TELETEXT_FIL1_END, 8);
210 	dump_reg_range(sd, "Teletext filter 2",   TVP5150_TELETEXT_FIL2_INI,
211 			TVP5150_TELETEXT_FIL2_END, 8);
212 
213 	dprintk0(sd->dev, "tvp5150: Teletext filter enable = 0x%02x\n",
214 		tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
215 	dprintk0(sd->dev, "tvp5150: Interrupt status register A = 0x%02x\n",
216 		tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
217 	dprintk0(sd->dev, "tvp5150: Interrupt enable register A = 0x%02x\n",
218 		tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
219 	dprintk0(sd->dev, "tvp5150: Interrupt configuration = 0x%02x\n",
220 		tvp5150_read(sd, TVP5150_INT_CONF));
221 	dprintk0(sd->dev, "tvp5150: VDP status register = 0x%02x\n",
222 		tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
223 	dprintk0(sd->dev, "tvp5150: FIFO word count = 0x%02x\n",
224 		tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
225 	dprintk0(sd->dev, "tvp5150: FIFO interrupt threshold = 0x%02x\n",
226 		tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
227 	dprintk0(sd->dev, "tvp5150: FIFO reset = 0x%02x\n",
228 		tvp5150_read(sd, TVP5150_FIFO_RESET));
229 	dprintk0(sd->dev, "tvp5150: Line number interrupt = 0x%02x\n",
230 		tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
231 	dprintk0(sd->dev, "tvp5150: Pixel alignment register = 0x%02x%02x\n",
232 		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
233 		tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
234 	dprintk0(sd->dev, "tvp5150: FIFO output control = 0x%02x\n",
235 		tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
236 	dprintk0(sd->dev, "tvp5150: Full field enable = 0x%02x\n",
237 		tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
238 	dprintk0(sd->dev, "tvp5150: Full field mode register = 0x%02x\n",
239 		tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
240 
241 	dump_reg_range(sd, "CC   data",   TVP5150_CC_DATA_INI,
242 			TVP5150_CC_DATA_END, 8);
243 
244 	dump_reg_range(sd, "WSS  data",   TVP5150_WSS_DATA_INI,
245 			TVP5150_WSS_DATA_END, 8);
246 
247 	dump_reg_range(sd, "VPS  data",   TVP5150_VPS_DATA_INI,
248 			TVP5150_VPS_DATA_END, 8);
249 
250 	dump_reg_range(sd, "VITC data",   TVP5150_VITC_DATA_INI,
251 			TVP5150_VITC_DATA_END, 10);
252 
253 	dump_reg_range(sd, "Line mode",   TVP5150_LINE_MODE_INI,
254 			TVP5150_LINE_MODE_END, 8);
255 	return 0;
256 }
257 
258 /****************************************************************************
259 			Basic functions
260  ****************************************************************************/
261 
262 static void tvp5150_selmux(struct v4l2_subdev *sd)
263 {
264 	int opmode = 0;
265 	struct tvp5150 *decoder = to_tvp5150(sd);
266 	int input = 0;
267 	int val;
268 
269 	/* Only tvp5150am1 and tvp5151 have signal generator support */
270 	if ((decoder->dev_id == 0x5150 && decoder->rom_ver == 0x0400) ||
271 	    (decoder->dev_id == 0x5151 && decoder->rom_ver == 0x0100)) {
272 		if (!decoder->enable)
273 			input = 8;
274 	}
275 
276 	switch (decoder->input) {
277 	case TVP5150_COMPOSITE1:
278 		input |= 2;
279 		/* fall through */
280 	case TVP5150_COMPOSITE0:
281 		break;
282 	case TVP5150_SVIDEO:
283 	default:
284 		input |= 1;
285 		break;
286 	}
287 
288 	dev_dbg_lvl(sd->dev, 1, debug, "Selecting video route: route input=%i, output=%i => tvp5150 input=%i, opmode=%i\n",
289 			decoder->input, decoder->output,
290 			input, opmode);
291 
292 	tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
293 	tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
294 
295 	/*
296 	 * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
297 	 * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
298 	 * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
299 	 * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
300 	 * INTREQ/GPCL/VBLK to logic 1.
301 	 */
302 	val = tvp5150_read(sd, TVP5150_MISC_CTL);
303 	if (val < 0) {
304 		dev_err(sd->dev, "%s: failed with error = %d\n", __func__, val);
305 		return;
306 	}
307 
308 	if (decoder->input == TVP5150_SVIDEO)
309 		val = (val & ~TVP5150_MISC_CTL_GPCL) | TVP5150_MISC_CTL_HVLK;
310 	else
311 		val = (val & ~TVP5150_MISC_CTL_HVLK) | TVP5150_MISC_CTL_GPCL;
312 	tvp5150_write(sd, TVP5150_MISC_CTL, val);
313 };
314 
315 struct i2c_reg_value {
316 	unsigned char reg;
317 	unsigned char value;
318 };
319 
320 /* Default values as sugested at TVP5150AM1 datasheet */
321 static const struct i2c_reg_value tvp5150_init_default[] = {
322 	{ /* 0x00 */
323 		TVP5150_VD_IN_SRC_SEL_1,0x00
324 	},
325 	{ /* 0x01 */
326 		TVP5150_ANAL_CHL_CTL,0x15
327 	},
328 	{ /* 0x02 */
329 		TVP5150_OP_MODE_CTL,0x00
330 	},
331 	{ /* 0x03 */
332 		TVP5150_MISC_CTL,0x01
333 	},
334 	{ /* 0x06 */
335 		TVP5150_COLOR_KIL_THSH_CTL,0x10
336 	},
337 	{ /* 0x07 */
338 		TVP5150_LUMA_PROC_CTL_1,0x60
339 	},
340 	{ /* 0x08 */
341 		TVP5150_LUMA_PROC_CTL_2,0x00
342 	},
343 	{ /* 0x09 */
344 		TVP5150_BRIGHT_CTL,0x80
345 	},
346 	{ /* 0x0a */
347 		TVP5150_SATURATION_CTL,0x80
348 	},
349 	{ /* 0x0b */
350 		TVP5150_HUE_CTL,0x00
351 	},
352 	{ /* 0x0c */
353 		TVP5150_CONTRAST_CTL,0x80
354 	},
355 	{ /* 0x0d */
356 		TVP5150_DATA_RATE_SEL,0x47
357 	},
358 	{ /* 0x0e */
359 		TVP5150_LUMA_PROC_CTL_3,0x00
360 	},
361 	{ /* 0x0f */
362 		TVP5150_CONF_SHARED_PIN,0x08
363 	},
364 	{ /* 0x11 */
365 		TVP5150_ACT_VD_CROP_ST_MSB,0x00
366 	},
367 	{ /* 0x12 */
368 		TVP5150_ACT_VD_CROP_ST_LSB,0x00
369 	},
370 	{ /* 0x13 */
371 		TVP5150_ACT_VD_CROP_STP_MSB,0x00
372 	},
373 	{ /* 0x14 */
374 		TVP5150_ACT_VD_CROP_STP_LSB,0x00
375 	},
376 	{ /* 0x15 */
377 		TVP5150_GENLOCK,0x01
378 	},
379 	{ /* 0x16 */
380 		TVP5150_HORIZ_SYNC_START,0x80
381 	},
382 	{ /* 0x18 */
383 		TVP5150_VERT_BLANKING_START,0x00
384 	},
385 	{ /* 0x19 */
386 		TVP5150_VERT_BLANKING_STOP,0x00
387 	},
388 	{ /* 0x1a */
389 		TVP5150_CHROMA_PROC_CTL_1,0x0c
390 	},
391 	{ /* 0x1b */
392 		TVP5150_CHROMA_PROC_CTL_2,0x14
393 	},
394 	{ /* 0x1c */
395 		TVP5150_INT_RESET_REG_B,0x00
396 	},
397 	{ /* 0x1d */
398 		TVP5150_INT_ENABLE_REG_B,0x00
399 	},
400 	{ /* 0x1e */
401 		TVP5150_INTT_CONFIG_REG_B,0x00
402 	},
403 	{ /* 0x28 */
404 		TVP5150_VIDEO_STD,0x00
405 	},
406 	{ /* 0x2e */
407 		TVP5150_MACROVISION_ON_CTR,0x0f
408 	},
409 	{ /* 0x2f */
410 		TVP5150_MACROVISION_OFF_CTR,0x01
411 	},
412 	{ /* 0xbb */
413 		TVP5150_TELETEXT_FIL_ENA,0x00
414 	},
415 	{ /* 0xc0 */
416 		TVP5150_INT_STATUS_REG_A,0x00
417 	},
418 	{ /* 0xc1 */
419 		TVP5150_INT_ENABLE_REG_A,0x00
420 	},
421 	{ /* 0xc2 */
422 		TVP5150_INT_CONF,0x04
423 	},
424 	{ /* 0xc8 */
425 		TVP5150_FIFO_INT_THRESHOLD,0x80
426 	},
427 	{ /* 0xc9 */
428 		TVP5150_FIFO_RESET,0x00
429 	},
430 	{ /* 0xca */
431 		TVP5150_LINE_NUMBER_INT,0x00
432 	},
433 	{ /* 0xcb */
434 		TVP5150_PIX_ALIGN_REG_LOW,0x4e
435 	},
436 	{ /* 0xcc */
437 		TVP5150_PIX_ALIGN_REG_HIGH,0x00
438 	},
439 	{ /* 0xcd */
440 		TVP5150_FIFO_OUT_CTRL,0x01
441 	},
442 	{ /* 0xcf */
443 		TVP5150_FULL_FIELD_ENA,0x00
444 	},
445 	{ /* 0xd0 */
446 		TVP5150_LINE_MODE_INI,0x00
447 	},
448 	{ /* 0xfc */
449 		TVP5150_FULL_FIELD_MODE_REG,0x7f
450 	},
451 	{ /* end of data */
452 		0xff,0xff
453 	}
454 };
455 
456 /* Default values as sugested at TVP5150AM1 datasheet */
457 static const struct i2c_reg_value tvp5150_init_enable[] = {
458 	{
459 		TVP5150_CONF_SHARED_PIN, 2
460 	},{	/* Automatic offset and AGC enabled */
461 		TVP5150_ANAL_CHL_CTL, 0x15
462 	},{	/* Activate YCrCb output 0x9 or 0xd ? */
463 		TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
464 				  TVP5150_MISC_CTL_INTREQ_OE |
465 				  TVP5150_MISC_CTL_YCBCR_OE |
466 				  TVP5150_MISC_CTL_SYNC_OE |
467 				  TVP5150_MISC_CTL_VBLANK |
468 				  TVP5150_MISC_CTL_CLOCK_OE,
469 	},{	/* Activates video std autodetection for all standards */
470 		TVP5150_AUTOSW_MSK, 0x0
471 	},{	/* Default format: 0x47. For 4:2:2: 0x40 */
472 		TVP5150_DATA_RATE_SEL, 0x47
473 	},{
474 		TVP5150_CHROMA_PROC_CTL_1, 0x0c
475 	},{
476 		TVP5150_CHROMA_PROC_CTL_2, 0x54
477 	},{	/* Non documented, but initialized on WinTV USB2 */
478 		0x27, 0x20
479 	},{
480 		0xff,0xff
481 	}
482 };
483 
484 struct tvp5150_vbi_type {
485 	unsigned int vbi_type;
486 	unsigned int ini_line;
487 	unsigned int end_line;
488 	unsigned int by_field :1;
489 };
490 
491 struct i2c_vbi_ram_value {
492 	u16 reg;
493 	struct tvp5150_vbi_type type;
494 	unsigned char values[16];
495 };
496 
497 /* This struct have the values for each supported VBI Standard
498  * by
499  tvp5150_vbi_types should follow the same order as vbi_ram_default
500  * value 0 means rom position 0x10, value 1 means rom position 0x30
501  * and so on. There are 16 possible locations from 0 to 15.
502  */
503 
504 static struct i2c_vbi_ram_value vbi_ram_default[] =
505 {
506 	/* FIXME: Current api doesn't handle all VBI types, those not
507 	   yet supported are placed under #if 0 */
508 #if 0
509 	{0x010, /* Teletext, SECAM, WST System A */
510 		{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
511 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
512 		  0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
513 	},
514 #endif
515 	{0x030, /* Teletext, PAL, WST System B */
516 		{V4L2_SLICED_TELETEXT_B,6,22,1},
517 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
518 		  0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
519 	},
520 #if 0
521 	{0x050, /* Teletext, PAL, WST System C */
522 		{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
523 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
524 		  0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
525 	},
526 	{0x070, /* Teletext, NTSC, WST System B */
527 		{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
528 		{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
529 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
530 	},
531 	{0x090, /* Tetetext, NTSC NABTS System C */
532 		{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
533 		{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
534 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
535 	},
536 	{0x0b0, /* Teletext, NTSC-J, NABTS System D */
537 		{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
538 		{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
539 		  0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
540 	},
541 	{0x0d0, /* Closed Caption, PAL/SECAM */
542 		{V4L2_SLICED_CAPTION_625,22,22,1},
543 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
544 		  0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
545 	},
546 #endif
547 	{0x0f0, /* Closed Caption, NTSC */
548 		{V4L2_SLICED_CAPTION_525,21,21,1},
549 		{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
550 		  0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
551 	},
552 	{0x110, /* Wide Screen Signal, PAL/SECAM */
553 		{V4L2_SLICED_WSS_625,23,23,1},
554 		{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
555 		  0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
556 	},
557 #if 0
558 	{0x130, /* Wide Screen Signal, NTSC C */
559 		{V4L2_SLICED_WSS_525,20,20,1},
560 		{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
561 		  0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
562 	},
563 	{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
564 		{V4l2_SLICED_VITC_625,6,22,0},
565 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
566 		  0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
567 	},
568 	{0x170, /* Vertical Interval Timecode (VITC), NTSC */
569 		{V4l2_SLICED_VITC_525,10,20,0},
570 		{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
571 		  0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
572 	},
573 #endif
574 	{0x190, /* Video Program System (VPS), PAL */
575 		{V4L2_SLICED_VPS,16,16,0},
576 		{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
577 		  0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
578 	},
579 	/* 0x1d0 User programmable */
580 
581 	/* End of struct */
582 	{ (u16)-1 }
583 };
584 
585 static int tvp5150_write_inittab(struct v4l2_subdev *sd,
586 				const struct i2c_reg_value *regs)
587 {
588 	while (regs->reg != 0xff) {
589 		tvp5150_write(sd, regs->reg, regs->value);
590 		regs++;
591 	}
592 	return 0;
593 }
594 
595 static int tvp5150_vdp_init(struct v4l2_subdev *sd,
596 				const struct i2c_vbi_ram_value *regs)
597 {
598 	unsigned int i;
599 
600 	/* Disable Full Field */
601 	tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
602 
603 	/* Before programming, Line mode should be at 0xff */
604 	for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
605 		tvp5150_write(sd, i, 0xff);
606 
607 	/* Load Ram Table */
608 	while (regs->reg != (u16)-1) {
609 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
610 		tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
611 
612 		for (i = 0; i < 16; i++)
613 			tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
614 
615 		regs++;
616 	}
617 	return 0;
618 }
619 
620 /* Fills VBI capabilities based on i2c_vbi_ram_value struct */
621 static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
622 				struct v4l2_sliced_vbi_cap *cap)
623 {
624 	const struct i2c_vbi_ram_value *regs = vbi_ram_default;
625 	int line;
626 
627 	dev_dbg_lvl(sd->dev, 1, debug, "g_sliced_vbi_cap\n");
628 	memset(cap, 0, sizeof *cap);
629 
630 	while (regs->reg != (u16)-1 ) {
631 		for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
632 			cap->service_lines[0][line] |= regs->type.vbi_type;
633 		}
634 		cap->service_set |= regs->type.vbi_type;
635 
636 		regs++;
637 	}
638 	return 0;
639 }
640 
641 /* Set vbi processing
642  * type - one of tvp5150_vbi_types
643  * line - line to gather data
644  * fields: bit 0 field1, bit 1, field2
645  * flags (default=0xf0) is a bitmask, were set means:
646  *	bit 7: enable filtering null bytes on CC
647  *	bit 6: send data also to FIFO
648  *	bit 5: don't allow data with errors on FIFO
649  *	bit 4: enable ECC when possible
650  * pix_align = pix alignment:
651  *	LSB = field1
652  *	MSB = field2
653  */
654 static int tvp5150_set_vbi(struct v4l2_subdev *sd,
655 			const struct i2c_vbi_ram_value *regs,
656 			unsigned int type,u8 flags, int line,
657 			const int fields)
658 {
659 	struct tvp5150 *decoder = to_tvp5150(sd);
660 	v4l2_std_id std = decoder->norm;
661 	u8 reg;
662 	int pos = 0;
663 
664 	if (std == V4L2_STD_ALL) {
665 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
666 		return 0;
667 	} else if (std & V4L2_STD_625_50) {
668 		/* Don't follow NTSC Line number convension */
669 		line += 3;
670 	}
671 
672 	if (line < 6 || line > 27)
673 		return 0;
674 
675 	while (regs->reg != (u16)-1) {
676 		if ((type & regs->type.vbi_type) &&
677 		    (line >= regs->type.ini_line) &&
678 		    (line <= regs->type.end_line))
679 			break;
680 
681 		regs++;
682 		pos++;
683 	}
684 
685 	if (regs->reg == (u16)-1)
686 		return 0;
687 
688 	type = pos | (flags & 0xf0);
689 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
690 
691 	if (fields & 1)
692 		tvp5150_write(sd, reg, type);
693 
694 	if (fields & 2)
695 		tvp5150_write(sd, reg + 1, type);
696 
697 	return type;
698 }
699 
700 static int tvp5150_get_vbi(struct v4l2_subdev *sd,
701 			const struct i2c_vbi_ram_value *regs, int line)
702 {
703 	struct tvp5150 *decoder = to_tvp5150(sd);
704 	v4l2_std_id std = decoder->norm;
705 	u8 reg;
706 	int pos, type = 0;
707 	int i, ret = 0;
708 
709 	if (std == V4L2_STD_ALL) {
710 		dev_err(sd->dev, "VBI can't be configured without knowing number of lines\n");
711 		return 0;
712 	} else if (std & V4L2_STD_625_50) {
713 		/* Don't follow NTSC Line number convension */
714 		line += 3;
715 	}
716 
717 	if (line < 6 || line > 27)
718 		return 0;
719 
720 	reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
721 
722 	for (i = 0; i <= 1; i++) {
723 		ret = tvp5150_read(sd, reg + i);
724 		if (ret < 0) {
725 			dev_err(sd->dev, "%s: failed with error = %d\n",
726 				 __func__, ret);
727 			return 0;
728 		}
729 		pos = ret & 0x0f;
730 		if (pos < 0x0f)
731 			type |= regs[pos].type.vbi_type;
732 	}
733 
734 	return type;
735 }
736 
737 static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
738 {
739 	struct tvp5150 *decoder = to_tvp5150(sd);
740 	int fmt = 0;
741 
742 	decoder->norm = std;
743 
744 	/* First tests should be against specific std */
745 
746 	if (std == V4L2_STD_NTSC_443) {
747 		fmt = VIDEO_STD_NTSC_4_43_BIT;
748 	} else if (std == V4L2_STD_PAL_M) {
749 		fmt = VIDEO_STD_PAL_M_BIT;
750 	} else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
751 		fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
752 	} else {
753 		/* Then, test against generic ones */
754 		if (std & V4L2_STD_NTSC)
755 			fmt = VIDEO_STD_NTSC_MJ_BIT;
756 		else if (std & V4L2_STD_PAL)
757 			fmt = VIDEO_STD_PAL_BDGHIN_BIT;
758 		else if (std & V4L2_STD_SECAM)
759 			fmt = VIDEO_STD_SECAM_BIT;
760 	}
761 
762 	dev_dbg_lvl(sd->dev, 1, debug, "Set video std register to %d.\n", fmt);
763 	tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
764 	return 0;
765 }
766 
767 static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
768 {
769 	struct tvp5150 *decoder = to_tvp5150(sd);
770 
771 	if (decoder->norm == std)
772 		return 0;
773 
774 	/* Change cropping height limits */
775 	if (std & V4L2_STD_525_60)
776 		decoder->rect.height = TVP5150_V_MAX_525_60;
777 	else
778 		decoder->rect.height = TVP5150_V_MAX_OTHERS;
779 
780 
781 	return tvp5150_set_std(sd, std);
782 }
783 
784 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
785 {
786 	struct tvp5150 *decoder = to_tvp5150(sd);
787 
788 	/* Initializes TVP5150 to its default values */
789 	tvp5150_write_inittab(sd, tvp5150_init_default);
790 
791 	/* Initializes VDP registers */
792 	tvp5150_vdp_init(sd, vbi_ram_default);
793 
794 	/* Selects decoder input */
795 	tvp5150_selmux(sd);
796 
797 	/* Initializes TVP5150 to stream enabled values */
798 	tvp5150_write_inittab(sd, tvp5150_init_enable);
799 
800 	/* Initialize image preferences */
801 	v4l2_ctrl_handler_setup(&decoder->hdl);
802 
803 	tvp5150_set_std(sd, decoder->norm);
804 
805 	if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
806 		tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);
807 
808 	return 0;
809 };
810 
811 static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
812 {
813 	struct v4l2_subdev *sd = to_sd(ctrl);
814 	struct tvp5150 *decoder = to_tvp5150(sd);
815 
816 	switch (ctrl->id) {
817 	case V4L2_CID_BRIGHTNESS:
818 		tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
819 		return 0;
820 	case V4L2_CID_CONTRAST:
821 		tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
822 		return 0;
823 	case V4L2_CID_SATURATION:
824 		tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
825 		return 0;
826 	case V4L2_CID_HUE:
827 		tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
828 		break;
829 	case V4L2_CID_TEST_PATTERN:
830 		decoder->enable = ctrl->val ? false : true;
831 		tvp5150_selmux(sd);
832 		return 0;
833 	}
834 	return -EINVAL;
835 }
836 
837 static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
838 {
839 	int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
840 
841 	switch (val & 0x0F) {
842 	case 0x01:
843 		return V4L2_STD_NTSC;
844 	case 0x03:
845 		return V4L2_STD_PAL;
846 	case 0x05:
847 		return V4L2_STD_PAL_M;
848 	case 0x07:
849 		return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
850 	case 0x09:
851 		return V4L2_STD_NTSC_443;
852 	case 0xb:
853 		return V4L2_STD_SECAM;
854 	default:
855 		return V4L2_STD_UNKNOWN;
856 	}
857 }
858 
859 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
860 		struct v4l2_subdev_pad_config *cfg,
861 		struct v4l2_subdev_format *format)
862 {
863 	struct v4l2_mbus_framefmt *f;
864 	struct tvp5150 *decoder = to_tvp5150(sd);
865 
866 	if (!format || (format->pad != DEMOD_PAD_VID_OUT))
867 		return -EINVAL;
868 
869 	f = &format->format;
870 
871 	f->width = decoder->rect.width;
872 	f->height = decoder->rect.height;
873 
874 	f->code = MEDIA_BUS_FMT_UYVY8_2X8;
875 	f->field = V4L2_FIELD_ALTERNATE;
876 	f->colorspace = V4L2_COLORSPACE_SMPTE170M;
877 
878 	dev_dbg_lvl(sd->dev, 1, debug, "width = %d, height = %d\n", f->width,
879 			f->height);
880 	return 0;
881 }
882 
883 static int tvp5150_set_selection(struct v4l2_subdev *sd,
884 				 struct v4l2_subdev_pad_config *cfg,
885 				 struct v4l2_subdev_selection *sel)
886 {
887 	struct tvp5150 *decoder = to_tvp5150(sd);
888 	struct v4l2_rect rect = sel->r;
889 	v4l2_std_id std;
890 	int hmax;
891 
892 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
893 	    sel->target != V4L2_SEL_TGT_CROP)
894 		return -EINVAL;
895 
896 	dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, height=%d\n",
897 		__func__, rect.left, rect.top, rect.width, rect.height);
898 
899 	/* tvp5150 has some special limits */
900 	rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
901 	rect.width = clamp_t(unsigned int, rect.width,
902 			     TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
903 			     TVP5150_H_MAX - rect.left);
904 	rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
905 
906 	/* Calculate height based on current standard */
907 	if (decoder->norm == V4L2_STD_ALL)
908 		std = tvp5150_read_std(sd);
909 	else
910 		std = decoder->norm;
911 
912 	if (std & V4L2_STD_525_60)
913 		hmax = TVP5150_V_MAX_525_60;
914 	else
915 		hmax = TVP5150_V_MAX_OTHERS;
916 
917 	rect.height = clamp_t(unsigned int, rect.height,
918 			      hmax - TVP5150_MAX_CROP_TOP - rect.top,
919 			      hmax - rect.top);
920 
921 	tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
922 	tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
923 		      rect.top + rect.height - hmax);
924 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
925 		      rect.left >> TVP5150_CROP_SHIFT);
926 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
927 		      rect.left | (1 << TVP5150_CROP_SHIFT));
928 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
929 		      (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
930 		      TVP5150_CROP_SHIFT);
931 	tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
932 		      rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
933 
934 	decoder->rect = rect;
935 
936 	return 0;
937 }
938 
939 static int tvp5150_get_selection(struct v4l2_subdev *sd,
940 				 struct v4l2_subdev_pad_config *cfg,
941 				 struct v4l2_subdev_selection *sel)
942 {
943 	struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
944 	v4l2_std_id std;
945 
946 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
947 		return -EINVAL;
948 
949 	switch (sel->target) {
950 	case V4L2_SEL_TGT_CROP_BOUNDS:
951 	case V4L2_SEL_TGT_CROP_DEFAULT:
952 		sel->r.left = 0;
953 		sel->r.top = 0;
954 		sel->r.width = TVP5150_H_MAX;
955 
956 		/* Calculate height based on current standard */
957 		if (decoder->norm == V4L2_STD_ALL)
958 			std = tvp5150_read_std(sd);
959 		else
960 			std = decoder->norm;
961 		if (std & V4L2_STD_525_60)
962 			sel->r.height = TVP5150_V_MAX_525_60;
963 		else
964 			sel->r.height = TVP5150_V_MAX_OTHERS;
965 		return 0;
966 	case V4L2_SEL_TGT_CROP:
967 		sel->r = decoder->rect;
968 		return 0;
969 	default:
970 		return -EINVAL;
971 	}
972 }
973 
974 static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
975 				 struct v4l2_mbus_config *cfg)
976 {
977 	struct tvp5150 *decoder = to_tvp5150(sd);
978 
979 	cfg->type = decoder->mbus_type;
980 	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
981 		   | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
982 
983 	return 0;
984 }
985 
986 /****************************************************************************
987 			V4L2 subdev pad ops
988  ****************************************************************************/
989 static int tvp5150_enum_mbus_code(struct v4l2_subdev *sd,
990 		struct v4l2_subdev_pad_config *cfg,
991 		struct v4l2_subdev_mbus_code_enum *code)
992 {
993 	if (code->pad || code->index)
994 		return -EINVAL;
995 
996 	code->code = MEDIA_BUS_FMT_UYVY8_2X8;
997 	return 0;
998 }
999 
1000 static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
1001 				   struct v4l2_subdev_pad_config *cfg,
1002 				   struct v4l2_subdev_frame_size_enum *fse)
1003 {
1004 	struct tvp5150 *decoder = to_tvp5150(sd);
1005 
1006 	if (fse->index >= 8 || fse->code != MEDIA_BUS_FMT_UYVY8_2X8)
1007 		return -EINVAL;
1008 
1009 	fse->code = MEDIA_BUS_FMT_UYVY8_2X8;
1010 	fse->min_width = decoder->rect.width;
1011 	fse->max_width = decoder->rect.width;
1012 	fse->min_height = decoder->rect.height / 2;
1013 	fse->max_height = decoder->rect.height / 2;
1014 
1015 	return 0;
1016 }
1017 
1018 /****************************************************************************
1019 			Media entity ops
1020  ****************************************************************************/
1021 
1022 #ifdef CONFIG_MEDIA_CONTROLLER
1023 static int tvp5150_link_setup(struct media_entity *entity,
1024 			      const struct media_pad *local,
1025 			      const struct media_pad *remote, u32 flags)
1026 {
1027 	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
1028 	struct tvp5150 *decoder = to_tvp5150(sd);
1029 	int i;
1030 
1031 	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1032 		if (remote->entity == &decoder->input_ent[i])
1033 			break;
1034 	}
1035 
1036 	/* Do nothing for entities that are not input connectors */
1037 	if (i == TVP5150_INPUT_NUM)
1038 		return 0;
1039 
1040 	decoder->input = i;
1041 
1042 	tvp5150_selmux(sd);
1043 
1044 	return 0;
1045 }
1046 
1047 static const struct media_entity_operations tvp5150_sd_media_ops = {
1048 	.link_setup = tvp5150_link_setup,
1049 };
1050 #endif
1051 
1052 /****************************************************************************
1053 			I2C Command
1054  ****************************************************************************/
1055 
1056 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
1057 {
1058 	struct tvp5150 *decoder = to_tvp5150(sd);
1059 	int val;
1060 
1061 	/* Enable or disable the video output signals. */
1062 	val = tvp5150_read(sd, TVP5150_MISC_CTL);
1063 	if (val < 0)
1064 		return val;
1065 
1066 	val &= ~(TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE |
1067 		 TVP5150_MISC_CTL_CLOCK_OE);
1068 
1069 	if (enable) {
1070 		/*
1071 		 * Enable the YCbCr and clock outputs. In discrete sync mode
1072 		 * (non-BT.656) additionally enable the the sync outputs.
1073 		 */
1074 		val |= TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
1075 		if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
1076 			val |= TVP5150_MISC_CTL_SYNC_OE;
1077 	}
1078 
1079 	tvp5150_write(sd, TVP5150_MISC_CTL, val);
1080 
1081 	return 0;
1082 }
1083 
1084 static int tvp5150_s_routing(struct v4l2_subdev *sd,
1085 			     u32 input, u32 output, u32 config)
1086 {
1087 	struct tvp5150 *decoder = to_tvp5150(sd);
1088 
1089 	decoder->input = input;
1090 	decoder->output = output;
1091 
1092 	if (output == TVP5150_BLACK_SCREEN)
1093 		decoder->enable = false;
1094 	else
1095 		decoder->enable = true;
1096 
1097 	tvp5150_selmux(sd);
1098 	return 0;
1099 }
1100 
1101 static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
1102 {
1103 	/* this is for capturing 36 raw vbi lines
1104 	   if there's a way to cut off the beginning 2 vbi lines
1105 	   with the tvp5150 then the vbi line count could be lowered
1106 	   to 17 lines/field again, although I couldn't find a register
1107 	   which could do that cropping */
1108 	if (fmt->sample_format == V4L2_PIX_FMT_GREY)
1109 		tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
1110 	if (fmt->count[0] == 18 && fmt->count[1] == 18) {
1111 		tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
1112 		tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
1113 	}
1114 	return 0;
1115 }
1116 
1117 static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1118 {
1119 	int i;
1120 
1121 	if (svbi->service_set != 0) {
1122 		for (i = 0; i <= 23; i++) {
1123 			svbi->service_lines[1][i] = 0;
1124 			svbi->service_lines[0][i] =
1125 				tvp5150_set_vbi(sd, vbi_ram_default,
1126 				       svbi->service_lines[0][i], 0xf0, i, 3);
1127 		}
1128 		/* Enables FIFO */
1129 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
1130 	} else {
1131 		/* Disables FIFO*/
1132 		tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
1133 
1134 		/* Disable Full Field */
1135 		tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
1136 
1137 		/* Disable Line modes */
1138 		for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
1139 			tvp5150_write(sd, i, 0xff);
1140 	}
1141 	return 0;
1142 }
1143 
1144 static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
1145 {
1146 	int i, mask = 0;
1147 
1148 	memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
1149 
1150 	for (i = 0; i <= 23; i++) {
1151 		svbi->service_lines[0][i] =
1152 			tvp5150_get_vbi(sd, vbi_ram_default, i);
1153 		mask |= svbi->service_lines[0][i];
1154 	}
1155 	svbi->service_set = mask;
1156 	return 0;
1157 }
1158 
1159 #ifdef CONFIG_VIDEO_ADV_DEBUG
1160 static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1161 {
1162 	int res;
1163 
1164 	res = tvp5150_read(sd, reg->reg & 0xff);
1165 	if (res < 0) {
1166 		dev_err(sd->dev, "%s: failed with error = %d\n", __func__, res);
1167 		return res;
1168 	}
1169 
1170 	reg->val = res;
1171 	reg->size = 1;
1172 	return 0;
1173 }
1174 
1175 static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
1176 {
1177 	return tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
1178 }
1179 #endif
1180 
1181 static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
1182 {
1183 	int status = tvp5150_read(sd, 0x88);
1184 
1185 	vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
1186 	return 0;
1187 }
1188 
1189 static int tvp5150_registered(struct v4l2_subdev *sd)
1190 {
1191 #ifdef CONFIG_MEDIA_CONTROLLER
1192 	struct tvp5150 *decoder = to_tvp5150(sd);
1193 	int ret = 0;
1194 	int i;
1195 
1196 	for (i = 0; i < TVP5150_INPUT_NUM; i++) {
1197 		struct media_entity *input = &decoder->input_ent[i];
1198 		struct media_pad *pad = &decoder->input_pad[i];
1199 
1200 		if (!input->name)
1201 			continue;
1202 
1203 		decoder->input_pad[i].flags = MEDIA_PAD_FL_SOURCE;
1204 
1205 		ret = media_entity_pads_init(input, 1, pad);
1206 		if (ret < 0)
1207 			return ret;
1208 
1209 		ret = media_device_register_entity(sd->v4l2_dev->mdev, input);
1210 		if (ret < 0)
1211 			return ret;
1212 
1213 		ret = media_create_pad_link(input, 0, &sd->entity,
1214 					    DEMOD_PAD_IF_INPUT, 0);
1215 		if (ret < 0) {
1216 			media_device_unregister_entity(input);
1217 			return ret;
1218 		}
1219 	}
1220 #endif
1221 
1222 	return 0;
1223 }
1224 
1225 /* ----------------------------------------------------------------------- */
1226 
1227 static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
1228 	.s_ctrl = tvp5150_s_ctrl,
1229 };
1230 
1231 static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
1232 	.log_status = tvp5150_log_status,
1233 	.reset = tvp5150_reset,
1234 #ifdef CONFIG_VIDEO_ADV_DEBUG
1235 	.g_register = tvp5150_g_register,
1236 	.s_register = tvp5150_s_register,
1237 #endif
1238 };
1239 
1240 static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
1241 	.g_tuner = tvp5150_g_tuner,
1242 };
1243 
1244 static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
1245 	.s_std = tvp5150_s_std,
1246 	.s_stream = tvp5150_s_stream,
1247 	.s_routing = tvp5150_s_routing,
1248 	.g_mbus_config = tvp5150_g_mbus_config,
1249 };
1250 
1251 static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
1252 	.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
1253 	.g_sliced_fmt = tvp5150_g_sliced_fmt,
1254 	.s_sliced_fmt = tvp5150_s_sliced_fmt,
1255 	.s_raw_fmt = tvp5150_s_raw_fmt,
1256 };
1257 
1258 static const struct v4l2_subdev_pad_ops tvp5150_pad_ops = {
1259 	.enum_mbus_code = tvp5150_enum_mbus_code,
1260 	.enum_frame_size = tvp5150_enum_frame_size,
1261 	.set_fmt = tvp5150_fill_fmt,
1262 	.get_fmt = tvp5150_fill_fmt,
1263 	.get_selection = tvp5150_get_selection,
1264 	.set_selection = tvp5150_set_selection,
1265 };
1266 
1267 static const struct v4l2_subdev_ops tvp5150_ops = {
1268 	.core = &tvp5150_core_ops,
1269 	.tuner = &tvp5150_tuner_ops,
1270 	.video = &tvp5150_video_ops,
1271 	.vbi = &tvp5150_vbi_ops,
1272 	.pad = &tvp5150_pad_ops,
1273 };
1274 
1275 static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
1276 	.registered = tvp5150_registered,
1277 };
1278 
1279 
1280 /****************************************************************************
1281 			I2C Client & Driver
1282  ****************************************************************************/
1283 
1284 static int tvp5150_detect_version(struct tvp5150 *core)
1285 {
1286 	struct v4l2_subdev *sd = &core->sd;
1287 	struct i2c_client *c = v4l2_get_subdevdata(sd);
1288 	unsigned int i;
1289 	u8 regs[4];
1290 	int res;
1291 
1292 	/*
1293 	 * Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
1294 	 * TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
1295 	 */
1296 	for (i = 0; i < 4; i++) {
1297 		res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
1298 		if (res < 0)
1299 			return res;
1300 		regs[i] = res;
1301 	}
1302 
1303 	core->dev_id = (regs[0] << 8) | regs[1];
1304 	core->rom_ver = (regs[2] << 8) | regs[3];
1305 
1306 	dev_info(sd->dev, "tvp%04x (%u.%u) chip found @ 0x%02x (%s)\n",
1307 		  core->dev_id, regs[2], regs[3], c->addr << 1,
1308 		  c->adapter->name);
1309 
1310 	if (core->dev_id == 0x5150 && core->rom_ver == 0x0321) {
1311 		dev_info(sd->dev, "tvp5150a detected.\n");
1312 	} else if (core->dev_id == 0x5150 && core->rom_ver == 0x0400) {
1313 		dev_info(sd->dev, "tvp5150am1 detected.\n");
1314 
1315 		/* ITU-T BT.656.4 timing */
1316 		tvp5150_write(sd, TVP5150_REV_SELECT, 0);
1317 	} else if (core->dev_id == 0x5151 && core->rom_ver == 0x0100) {
1318 		dev_info(sd->dev, "tvp5151 detected.\n");
1319 	} else {
1320 		dev_info(sd->dev, "*** unknown tvp%04x chip detected.\n",
1321 			  core->dev_id);
1322 	}
1323 
1324 	return 0;
1325 }
1326 
1327 static int tvp5150_init(struct i2c_client *c)
1328 {
1329 	struct gpio_desc *pdn_gpio;
1330 	struct gpio_desc *reset_gpio;
1331 
1332 	pdn_gpio = devm_gpiod_get_optional(&c->dev, "pdn", GPIOD_OUT_HIGH);
1333 	if (IS_ERR(pdn_gpio))
1334 		return PTR_ERR(pdn_gpio);
1335 
1336 	if (pdn_gpio) {
1337 		gpiod_set_value_cansleep(pdn_gpio, 0);
1338 		/* Delay time between power supplies active and reset */
1339 		msleep(20);
1340 	}
1341 
1342 	reset_gpio = devm_gpiod_get_optional(&c->dev, "reset", GPIOD_OUT_HIGH);
1343 	if (IS_ERR(reset_gpio))
1344 		return PTR_ERR(reset_gpio);
1345 
1346 	if (reset_gpio) {
1347 		/* RESETB pulse duration */
1348 		ndelay(500);
1349 		gpiod_set_value_cansleep(reset_gpio, 0);
1350 		/* Delay time between end of reset to I2C active */
1351 		usleep_range(200, 250);
1352 	}
1353 
1354 	return 0;
1355 }
1356 
1357 static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
1358 {
1359 	struct v4l2_fwnode_endpoint bus_cfg;
1360 	struct device_node *ep;
1361 #ifdef CONFIG_MEDIA_CONTROLLER
1362 	struct device_node *connectors, *child;
1363 	struct media_entity *input;
1364 	const char *name;
1365 	u32 input_type;
1366 #endif
1367 	unsigned int flags;
1368 	int ret = 0;
1369 
1370 	ep = of_graph_get_next_endpoint(np, NULL);
1371 	if (!ep)
1372 		return -EINVAL;
1373 
1374 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
1375 	if (ret)
1376 		goto err;
1377 
1378 	flags = bus_cfg.bus.parallel.flags;
1379 
1380 	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
1381 	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
1382 	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
1383 	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
1384 		ret = -EINVAL;
1385 		goto err;
1386 	}
1387 
1388 	decoder->mbus_type = bus_cfg.bus_type;
1389 
1390 #ifdef CONFIG_MEDIA_CONTROLLER
1391 	connectors = of_get_child_by_name(np, "connectors");
1392 
1393 	if (!connectors)
1394 		goto err;
1395 
1396 	for_each_available_child_of_node(connectors, child) {
1397 		ret = of_property_read_u32(child, "input", &input_type);
1398 		if (ret) {
1399 			dev_err(decoder->sd.dev,
1400 				 "missing type property in node %s\n",
1401 				 child->name);
1402 			goto err_connector;
1403 		}
1404 
1405 		if (input_type >= TVP5150_INPUT_NUM) {
1406 			ret = -EINVAL;
1407 			goto err_connector;
1408 		}
1409 
1410 		input = &decoder->input_ent[input_type];
1411 
1412 		/* Each input connector can only be defined once */
1413 		if (input->name) {
1414 			dev_err(decoder->sd.dev,
1415 				 "input %s with same type already exists\n",
1416 				 input->name);
1417 			ret = -EINVAL;
1418 			goto err_connector;
1419 		}
1420 
1421 		switch (input_type) {
1422 		case TVP5150_COMPOSITE0:
1423 		case TVP5150_COMPOSITE1:
1424 			input->function = MEDIA_ENT_F_CONN_COMPOSITE;
1425 			break;
1426 		case TVP5150_SVIDEO:
1427 			input->function = MEDIA_ENT_F_CONN_SVIDEO;
1428 			break;
1429 		}
1430 
1431 		input->flags = MEDIA_ENT_FL_CONNECTOR;
1432 
1433 		ret = of_property_read_string(child, "label", &name);
1434 		if (ret < 0) {
1435 			dev_err(decoder->sd.dev,
1436 				 "missing label property in node %s\n",
1437 				 child->name);
1438 			goto err_connector;
1439 		}
1440 
1441 		input->name = name;
1442 	}
1443 
1444 err_connector:
1445 	of_node_put(connectors);
1446 #endif
1447 err:
1448 	of_node_put(ep);
1449 	return ret;
1450 }
1451 
1452 static const char * const tvp5150_test_patterns[2] = {
1453 	"Disabled",
1454 	"Black screen"
1455 };
1456 
1457 static int tvp5150_probe(struct i2c_client *c,
1458 			 const struct i2c_device_id *id)
1459 {
1460 	struct tvp5150 *core;
1461 	struct v4l2_subdev *sd;
1462 	struct device_node *np = c->dev.of_node;
1463 	int res;
1464 
1465 	/* Check if the adapter supports the needed features */
1466 	if (!i2c_check_functionality(c->adapter,
1467 	     I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
1468 		return -EIO;
1469 
1470 	res = tvp5150_init(c);
1471 	if (res)
1472 		return res;
1473 
1474 	core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
1475 	if (!core)
1476 		return -ENOMEM;
1477 
1478 	sd = &core->sd;
1479 
1480 	if (IS_ENABLED(CONFIG_OF) && np) {
1481 		res = tvp5150_parse_dt(core, np);
1482 		if (res) {
1483 			dev_err(sd->dev, "DT parsing error: %d\n", res);
1484 			return res;
1485 		}
1486 	} else {
1487 		/* Default to BT.656 embedded sync */
1488 		core->mbus_type = V4L2_MBUS_BT656;
1489 	}
1490 
1491 	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
1492 	sd->internal_ops = &tvp5150_internal_ops;
1493 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1494 
1495 #if defined(CONFIG_MEDIA_CONTROLLER)
1496 	core->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
1497 	core->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
1498 	core->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE;
1499 
1500 	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
1501 
1502 	res = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, core->pads);
1503 	if (res < 0)
1504 		return res;
1505 
1506 	sd->entity.ops = &tvp5150_sd_media_ops;
1507 #endif
1508 
1509 	res = tvp5150_detect_version(core);
1510 	if (res < 0)
1511 		return res;
1512 
1513 	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
1514 	core->input = TVP5150_COMPOSITE1;
1515 	core->enable = true;
1516 
1517 	v4l2_ctrl_handler_init(&core->hdl, 5);
1518 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1519 			V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1520 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1521 			V4L2_CID_CONTRAST, 0, 255, 1, 128);
1522 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1523 			V4L2_CID_SATURATION, 0, 255, 1, 128);
1524 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1525 			V4L2_CID_HUE, -128, 127, 1, 0);
1526 	v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
1527 			V4L2_CID_PIXEL_RATE, 27000000,
1528 			27000000, 1, 27000000);
1529 	v4l2_ctrl_new_std_menu_items(&core->hdl, &tvp5150_ctrl_ops,
1530 				     V4L2_CID_TEST_PATTERN,
1531 				     ARRAY_SIZE(tvp5150_test_patterns),
1532 				     0, 0, tvp5150_test_patterns);
1533 	sd->ctrl_handler = &core->hdl;
1534 	if (core->hdl.error) {
1535 		res = core->hdl.error;
1536 		goto err;
1537 	}
1538 
1539 	/* Default is no cropping */
1540 	core->rect.top = 0;
1541 	if (tvp5150_read_std(sd) & V4L2_STD_525_60)
1542 		core->rect.height = TVP5150_V_MAX_525_60;
1543 	else
1544 		core->rect.height = TVP5150_V_MAX_OTHERS;
1545 	core->rect.left = 0;
1546 	core->rect.width = TVP5150_H_MAX;
1547 
1548 	tvp5150_reset(sd, 0);	/* Calls v4l2_ctrl_handler_setup() */
1549 
1550 	res = v4l2_async_register_subdev(sd);
1551 	if (res < 0)
1552 		goto err;
1553 
1554 	if (debug > 1)
1555 		tvp5150_log_status(sd);
1556 	return 0;
1557 
1558 err:
1559 	v4l2_ctrl_handler_free(&core->hdl);
1560 	return res;
1561 }
1562 
1563 static int tvp5150_remove(struct i2c_client *c)
1564 {
1565 	struct v4l2_subdev *sd = i2c_get_clientdata(c);
1566 	struct tvp5150 *decoder = to_tvp5150(sd);
1567 
1568 	dev_dbg_lvl(sd->dev, 1, debug,
1569 		"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
1570 		c->addr << 1);
1571 
1572 	v4l2_async_unregister_subdev(sd);
1573 	v4l2_ctrl_handler_free(&decoder->hdl);
1574 	return 0;
1575 }
1576 
1577 /* ----------------------------------------------------------------------- */
1578 
1579 static const struct i2c_device_id tvp5150_id[] = {
1580 	{ "tvp5150", 0 },
1581 	{ }
1582 };
1583 MODULE_DEVICE_TABLE(i2c, tvp5150_id);
1584 
1585 #if IS_ENABLED(CONFIG_OF)
1586 static const struct of_device_id tvp5150_of_match[] = {
1587 	{ .compatible = "ti,tvp5150", },
1588 	{ /* sentinel */ },
1589 };
1590 MODULE_DEVICE_TABLE(of, tvp5150_of_match);
1591 #endif
1592 
1593 static struct i2c_driver tvp5150_driver = {
1594 	.driver = {
1595 		.of_match_table = of_match_ptr(tvp5150_of_match),
1596 		.name	= "tvp5150",
1597 	},
1598 	.probe		= tvp5150_probe,
1599 	.remove		= tvp5150_remove,
1600 	.id_table	= tvp5150_id,
1601 };
1602 
1603 module_i2c_driver(tvp5150_driver);
1604