xref: /openbmc/linux/drivers/media/i2c/tvp514x.c (revision ac73d4bf)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/media/i2c/tvp514x.c
4  *
5  * TI TVP5146/47 decoder driver
6  *
7  * Copyright (C) 2008 Texas Instruments Inc
8  * Author: Vaibhav Hiremath <hvaibhav@ti.com>
9  *
10  * Contributors:
11  *     Sivaraj R <sivaraj@ti.com>
12  *     Brijesh R Jadav <brijesh.j@ti.com>
13  *     Hardik Shah <hardik.shah@ti.com>
14  *     Manjunath Hadli <mrh@ti.com>
15  *     Karicheri Muralidharan <m-karicheri2@ti.com>
16  *     Prabhakar Lad <prabhakar.lad@ti.com>
17  */
18 
19 #include <linux/i2c.h>
20 #include <linux/slab.h>
21 #include <linux/delay.h>
22 #include <linux/videodev2.h>
23 #include <linux/module.h>
24 #include <linux/v4l2-mediabus.h>
25 #include <linux/of.h>
26 #include <linux/of_graph.h>
27 
28 #include <media/v4l2-async.h>
29 #include <media/v4l2-device.h>
30 #include <media/v4l2-common.h>
31 #include <media/v4l2-mediabus.h>
32 #include <media/v4l2-fwnode.h>
33 #include <media/v4l2-ctrls.h>
34 #include <media/i2c/tvp514x.h>
35 #include <media/media-entity.h>
36 
37 #include "tvp514x_regs.h"
38 
39 /* Private macros for TVP */
40 #define I2C_RETRY_COUNT                 (5)
41 #define LOCK_RETRY_COUNT                (5)
42 #define LOCK_RETRY_DELAY                (200)
43 
44 /* Debug functions */
45 static bool debug;
46 module_param(debug, bool, 0644);
47 MODULE_PARM_DESC(debug, "Debug level (0-1)");
48 
49 MODULE_AUTHOR("Texas Instruments");
50 MODULE_DESCRIPTION("TVP514X linux decoder driver");
51 MODULE_LICENSE("GPL");
52 
53 /* enum tvp514x_std - enum for supported standards */
54 enum tvp514x_std {
55 	STD_NTSC_MJ = 0,
56 	STD_PAL_BDGHIN,
57 	STD_INVALID
58 };
59 
60 /**
61  * struct tvp514x_std_info - Structure to store standard information
62  * @width: Line width in pixels
63  * @height:Number of active lines
64  * @video_std: Value to write in REG_VIDEO_STD register
65  * @standard: v4l2 standard structure information
66  */
67 struct tvp514x_std_info {
68 	unsigned long width;
69 	unsigned long height;
70 	u8 video_std;
71 	struct v4l2_standard standard;
72 };
73 
74 static struct tvp514x_reg tvp514x_reg_list_default[0x40];
75 
76 static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
77 /**
78  * struct tvp514x_decoder - TVP5146/47 decoder object
79  * @sd: Subdevice Slave handle
80  * @hdl: embedded &struct v4l2_ctrl_handler
81  * @tvp514x_regs: copy of hw's regs with preset values.
82  * @pdata: Board specific
83  * @ver: Chip version
84  * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
85  * @pix: Current pixel format
86  * @num_fmts: Number of formats
87  * @fmt_list: Format list
88  * @current_std: Current standard
89  * @num_stds: Number of standards
90  * @std_list: Standards list
91  * @input: Input routing at chip level
92  * @output: Output routing at chip level
93  * @pad: subdev media pad associated with the decoder
94  * @format: media bus frame format
95  * @int_seq: driver's register init sequence
96  */
97 struct tvp514x_decoder {
98 	struct v4l2_subdev sd;
99 	struct v4l2_ctrl_handler hdl;
100 	struct tvp514x_reg tvp514x_regs[ARRAY_SIZE(tvp514x_reg_list_default)];
101 	const struct tvp514x_platform_data *pdata;
102 
103 	int ver;
104 	int streaming;
105 
106 	struct v4l2_pix_format pix;
107 	int num_fmts;
108 	const struct v4l2_fmtdesc *fmt_list;
109 
110 	enum tvp514x_std current_std;
111 	int num_stds;
112 	const struct tvp514x_std_info *std_list;
113 	/* Input and Output Routing parameters */
114 	u32 input;
115 	u32 output;
116 
117 	/* mc related members */
118 	struct media_pad pad;
119 	struct v4l2_mbus_framefmt format;
120 
121 	struct tvp514x_reg *int_seq;
122 };
123 
124 /* TVP514x default register values */
125 static struct tvp514x_reg tvp514x_reg_list_default[] = {
126 	/* Composite selected */
127 	{TOK_WRITE, REG_INPUT_SEL, 0x05},
128 	{TOK_WRITE, REG_AFE_GAIN_CTRL, 0x0F},
129 	/* Auto mode */
130 	{TOK_WRITE, REG_VIDEO_STD, 0x00},
131 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
132 	{TOK_SKIP, REG_AUTOSWITCH_MASK, 0x3F},
133 	{TOK_WRITE, REG_COLOR_KILLER, 0x10},
134 	{TOK_WRITE, REG_LUMA_CONTROL1, 0x00},
135 	{TOK_WRITE, REG_LUMA_CONTROL2, 0x00},
136 	{TOK_WRITE, REG_LUMA_CONTROL3, 0x02},
137 	{TOK_WRITE, REG_BRIGHTNESS, 0x80},
138 	{TOK_WRITE, REG_CONTRAST, 0x80},
139 	{TOK_WRITE, REG_SATURATION, 0x80},
140 	{TOK_WRITE, REG_HUE, 0x00},
141 	{TOK_WRITE, REG_CHROMA_CONTROL1, 0x00},
142 	{TOK_WRITE, REG_CHROMA_CONTROL2, 0x0E},
143 	/* Reserved */
144 	{TOK_SKIP, 0x0F, 0x00},
145 	{TOK_WRITE, REG_COMP_PR_SATURATION, 0x80},
146 	{TOK_WRITE, REG_COMP_Y_CONTRAST, 0x80},
147 	{TOK_WRITE, REG_COMP_PB_SATURATION, 0x80},
148 	/* Reserved */
149 	{TOK_SKIP, 0x13, 0x00},
150 	{TOK_WRITE, REG_COMP_Y_BRIGHTNESS, 0x80},
151 	/* Reserved */
152 	{TOK_SKIP, 0x15, 0x00},
153 	/* NTSC timing */
154 	{TOK_SKIP, REG_AVID_START_PIXEL_LSB, 0x55},
155 	{TOK_SKIP, REG_AVID_START_PIXEL_MSB, 0x00},
156 	{TOK_SKIP, REG_AVID_STOP_PIXEL_LSB, 0x25},
157 	{TOK_SKIP, REG_AVID_STOP_PIXEL_MSB, 0x03},
158 	/* NTSC timing */
159 	{TOK_SKIP, REG_HSYNC_START_PIXEL_LSB, 0x00},
160 	{TOK_SKIP, REG_HSYNC_START_PIXEL_MSB, 0x00},
161 	{TOK_SKIP, REG_HSYNC_STOP_PIXEL_LSB, 0x40},
162 	{TOK_SKIP, REG_HSYNC_STOP_PIXEL_MSB, 0x00},
163 	/* NTSC timing */
164 	{TOK_SKIP, REG_VSYNC_START_LINE_LSB, 0x04},
165 	{TOK_SKIP, REG_VSYNC_START_LINE_MSB, 0x00},
166 	{TOK_SKIP, REG_VSYNC_STOP_LINE_LSB, 0x07},
167 	{TOK_SKIP, REG_VSYNC_STOP_LINE_MSB, 0x00},
168 	/* NTSC timing */
169 	{TOK_SKIP, REG_VBLK_START_LINE_LSB, 0x01},
170 	{TOK_SKIP, REG_VBLK_START_LINE_MSB, 0x00},
171 	{TOK_SKIP, REG_VBLK_STOP_LINE_LSB, 0x15},
172 	{TOK_SKIP, REG_VBLK_STOP_LINE_MSB, 0x00},
173 	/* Reserved */
174 	{TOK_SKIP, 0x26, 0x00},
175 	/* Reserved */
176 	{TOK_SKIP, 0x27, 0x00},
177 	{TOK_SKIP, REG_FAST_SWTICH_CONTROL, 0xCC},
178 	/* Reserved */
179 	{TOK_SKIP, 0x29, 0x00},
180 	{TOK_SKIP, REG_FAST_SWTICH_SCART_DELAY, 0x00},
181 	/* Reserved */
182 	{TOK_SKIP, 0x2B, 0x00},
183 	{TOK_SKIP, REG_SCART_DELAY, 0x00},
184 	{TOK_SKIP, REG_CTI_DELAY, 0x00},
185 	{TOK_SKIP, REG_CTI_CONTROL, 0x00},
186 	/* Reserved */
187 	{TOK_SKIP, 0x2F, 0x00},
188 	/* Reserved */
189 	{TOK_SKIP, 0x30, 0x00},
190 	/* Reserved */
191 	{TOK_SKIP, 0x31, 0x00},
192 	/* HS, VS active high */
193 	{TOK_WRITE, REG_SYNC_CONTROL, 0x00},
194 	/* 10-bit BT.656 */
195 	{TOK_WRITE, REG_OUTPUT_FORMATTER1, 0x00},
196 	/* Enable clk & data */
197 	{TOK_WRITE, REG_OUTPUT_FORMATTER2, 0x11},
198 	/* Enable AVID & FLD */
199 	{TOK_WRITE, REG_OUTPUT_FORMATTER3, 0xEE},
200 	/* Enable VS & HS */
201 	{TOK_WRITE, REG_OUTPUT_FORMATTER4, 0xAF},
202 	{TOK_WRITE, REG_OUTPUT_FORMATTER5, 0xFF},
203 	{TOK_WRITE, REG_OUTPUT_FORMATTER6, 0xFF},
204 	/* Clear status */
205 	{TOK_WRITE, REG_CLEAR_LOST_LOCK, 0x01},
206 	{TOK_TERM, 0, 0},
207 };
208 
209 /*
210  * List of image formats supported by TVP5146/47 decoder
211  * Currently we are using 8 bit mode only, but can be
212  * extended to 10/20 bit mode.
213  */
214 static const struct v4l2_fmtdesc tvp514x_fmt_list[] = {
215 	{
216 	 .index		= 0,
217 	 .type		= V4L2_BUF_TYPE_VIDEO_CAPTURE,
218 	 .flags		= 0,
219 	 .description	= "8-bit UYVY 4:2:2 Format",
220 	 .pixelformat	= V4L2_PIX_FMT_UYVY,
221 	},
222 };
223 
224 /*
225  * Supported standards -
226  *
227  * Currently supports two standards only, need to add support for rest of the
228  * modes, like SECAM, etc...
229  */
230 static const struct tvp514x_std_info tvp514x_std_list[] = {
231 	/* Standard: STD_NTSC_MJ */
232 	[STD_NTSC_MJ] = {
233 	 .width = NTSC_NUM_ACTIVE_PIXELS,
234 	 .height = NTSC_NUM_ACTIVE_LINES,
235 	 .video_std = VIDEO_STD_NTSC_MJ_BIT,
236 	 .standard = {
237 		      .index = 0,
238 		      .id = V4L2_STD_NTSC,
239 		      .name = "NTSC",
240 		      .frameperiod = {1001, 30000},
241 		      .framelines = 525
242 		     },
243 	/* Standard: STD_PAL_BDGHIN */
244 	},
245 	[STD_PAL_BDGHIN] = {
246 	 .width = PAL_NUM_ACTIVE_PIXELS,
247 	 .height = PAL_NUM_ACTIVE_LINES,
248 	 .video_std = VIDEO_STD_PAL_BDGHIN_BIT,
249 	 .standard = {
250 		      .index = 1,
251 		      .id = V4L2_STD_PAL,
252 		      .name = "PAL",
253 		      .frameperiod = {1, 25},
254 		      .framelines = 625
255 		     },
256 	},
257 	/* Standard: need to add for additional standard */
258 };
259 
260 
261 static inline struct tvp514x_decoder *to_decoder(struct v4l2_subdev *sd)
262 {
263 	return container_of(sd, struct tvp514x_decoder, sd);
264 }
265 
266 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
267 {
268 	return &container_of(ctrl->handler, struct tvp514x_decoder, hdl)->sd;
269 }
270 
271 
272 /**
273  * tvp514x_read_reg() - Read a value from a register in an TVP5146/47.
274  * @sd: ptr to v4l2_subdev struct
275  * @reg: TVP5146/47 register address
276  *
277  * Returns value read if successful, or non-zero (-1) otherwise.
278  */
279 static int tvp514x_read_reg(struct v4l2_subdev *sd, u8 reg)
280 {
281 	int err, retry = 0;
282 	struct i2c_client *client = v4l2_get_subdevdata(sd);
283 
284 read_again:
285 
286 	err = i2c_smbus_read_byte_data(client, reg);
287 	if (err < 0) {
288 		if (retry <= I2C_RETRY_COUNT) {
289 			v4l2_warn(sd, "Read: retry ... %d\n", retry);
290 			retry++;
291 			msleep_interruptible(10);
292 			goto read_again;
293 		}
294 	}
295 
296 	return err;
297 }
298 
299 /**
300  * dump_reg() - dump the register content of TVP5146/47.
301  * @sd: ptr to v4l2_subdev struct
302  * @reg: TVP5146/47 register address
303  */
304 static void dump_reg(struct v4l2_subdev *sd, u8 reg)
305 {
306 	u32 val;
307 
308 	val = tvp514x_read_reg(sd, reg);
309 	v4l2_info(sd, "Reg(0x%.2X): 0x%.2X\n", reg, val);
310 }
311 
312 /**
313  * tvp514x_write_reg() - Write a value to a register in TVP5146/47
314  * @sd: ptr to v4l2_subdev struct
315  * @reg: TVP5146/47 register address
316  * @val: value to be written to the register
317  *
318  * Write a value to a register in an TVP5146/47 decoder device.
319  * Returns zero if successful, or non-zero otherwise.
320  */
321 static int tvp514x_write_reg(struct v4l2_subdev *sd, u8 reg, u8 val)
322 {
323 	int err, retry = 0;
324 	struct i2c_client *client = v4l2_get_subdevdata(sd);
325 
326 write_again:
327 
328 	err = i2c_smbus_write_byte_data(client, reg, val);
329 	if (err) {
330 		if (retry <= I2C_RETRY_COUNT) {
331 			v4l2_warn(sd, "Write: retry ... %d\n", retry);
332 			retry++;
333 			msleep_interruptible(10);
334 			goto write_again;
335 		}
336 	}
337 
338 	return err;
339 }
340 
341 /**
342  * tvp514x_write_regs() : Initializes a list of TVP5146/47 registers
343  * @sd: ptr to v4l2_subdev struct
344  * @reglist: list of TVP5146/47 registers and values
345  *
346  * Initializes a list of TVP5146/47 registers:-
347  *		if token is TOK_TERM, then entire write operation terminates
348  *		if token is TOK_DELAY, then a delay of 'val' msec is introduced
349  *		if token is TOK_SKIP, then the register write is skipped
350  *		if token is TOK_WRITE, then the register write is performed
351  * Returns zero if successful, or non-zero otherwise.
352  */
353 static int tvp514x_write_regs(struct v4l2_subdev *sd,
354 			      const struct tvp514x_reg reglist[])
355 {
356 	int err;
357 	const struct tvp514x_reg *next = reglist;
358 
359 	for (; next->token != TOK_TERM; next++) {
360 		if (next->token == TOK_DELAY) {
361 			msleep(next->val);
362 			continue;
363 		}
364 
365 		if (next->token == TOK_SKIP)
366 			continue;
367 
368 		err = tvp514x_write_reg(sd, next->reg, (u8) next->val);
369 		if (err) {
370 			v4l2_err(sd, "Write failed. Err[%d]\n", err);
371 			return err;
372 		}
373 	}
374 	return 0;
375 }
376 
377 /**
378  * tvp514x_query_current_std() : Query the current standard detected by TVP5146/47
379  * @sd: ptr to v4l2_subdev struct
380  *
381  * Returns the current standard detected by TVP5146/47, STD_INVALID if there is no
382  * standard detected.
383  */
384 static enum tvp514x_std tvp514x_query_current_std(struct v4l2_subdev *sd)
385 {
386 	u8 std, std_status;
387 
388 	std = tvp514x_read_reg(sd, REG_VIDEO_STD);
389 	if ((std & VIDEO_STD_MASK) == VIDEO_STD_AUTO_SWITCH_BIT)
390 		/* use the standard status register */
391 		std_status = tvp514x_read_reg(sd, REG_VIDEO_STD_STATUS);
392 	else
393 		/* use the standard register itself */
394 		std_status = std;
395 
396 	switch (std_status & VIDEO_STD_MASK) {
397 	case VIDEO_STD_NTSC_MJ_BIT:
398 		return STD_NTSC_MJ;
399 
400 	case VIDEO_STD_PAL_BDGHIN_BIT:
401 		return STD_PAL_BDGHIN;
402 
403 	default:
404 		return STD_INVALID;
405 	}
406 
407 	return STD_INVALID;
408 }
409 
410 /* TVP5146/47 register dump function */
411 static void tvp514x_reg_dump(struct v4l2_subdev *sd)
412 {
413 	dump_reg(sd, REG_INPUT_SEL);
414 	dump_reg(sd, REG_AFE_GAIN_CTRL);
415 	dump_reg(sd, REG_VIDEO_STD);
416 	dump_reg(sd, REG_OPERATION_MODE);
417 	dump_reg(sd, REG_COLOR_KILLER);
418 	dump_reg(sd, REG_LUMA_CONTROL1);
419 	dump_reg(sd, REG_LUMA_CONTROL2);
420 	dump_reg(sd, REG_LUMA_CONTROL3);
421 	dump_reg(sd, REG_BRIGHTNESS);
422 	dump_reg(sd, REG_CONTRAST);
423 	dump_reg(sd, REG_SATURATION);
424 	dump_reg(sd, REG_HUE);
425 	dump_reg(sd, REG_CHROMA_CONTROL1);
426 	dump_reg(sd, REG_CHROMA_CONTROL2);
427 	dump_reg(sd, REG_COMP_PR_SATURATION);
428 	dump_reg(sd, REG_COMP_Y_CONTRAST);
429 	dump_reg(sd, REG_COMP_PB_SATURATION);
430 	dump_reg(sd, REG_COMP_Y_BRIGHTNESS);
431 	dump_reg(sd, REG_AVID_START_PIXEL_LSB);
432 	dump_reg(sd, REG_AVID_START_PIXEL_MSB);
433 	dump_reg(sd, REG_AVID_STOP_PIXEL_LSB);
434 	dump_reg(sd, REG_AVID_STOP_PIXEL_MSB);
435 	dump_reg(sd, REG_HSYNC_START_PIXEL_LSB);
436 	dump_reg(sd, REG_HSYNC_START_PIXEL_MSB);
437 	dump_reg(sd, REG_HSYNC_STOP_PIXEL_LSB);
438 	dump_reg(sd, REG_HSYNC_STOP_PIXEL_MSB);
439 	dump_reg(sd, REG_VSYNC_START_LINE_LSB);
440 	dump_reg(sd, REG_VSYNC_START_LINE_MSB);
441 	dump_reg(sd, REG_VSYNC_STOP_LINE_LSB);
442 	dump_reg(sd, REG_VSYNC_STOP_LINE_MSB);
443 	dump_reg(sd, REG_VBLK_START_LINE_LSB);
444 	dump_reg(sd, REG_VBLK_START_LINE_MSB);
445 	dump_reg(sd, REG_VBLK_STOP_LINE_LSB);
446 	dump_reg(sd, REG_VBLK_STOP_LINE_MSB);
447 	dump_reg(sd, REG_SYNC_CONTROL);
448 	dump_reg(sd, REG_OUTPUT_FORMATTER1);
449 	dump_reg(sd, REG_OUTPUT_FORMATTER2);
450 	dump_reg(sd, REG_OUTPUT_FORMATTER3);
451 	dump_reg(sd, REG_OUTPUT_FORMATTER4);
452 	dump_reg(sd, REG_OUTPUT_FORMATTER5);
453 	dump_reg(sd, REG_OUTPUT_FORMATTER6);
454 	dump_reg(sd, REG_CLEAR_LOST_LOCK);
455 }
456 
457 /**
458  * tvp514x_configure() - Configure the TVP5146/47 registers
459  * @sd: ptr to v4l2_subdev struct
460  * @decoder: ptr to tvp514x_decoder structure
461  *
462  * Returns zero if successful, or non-zero otherwise.
463  */
464 static int tvp514x_configure(struct v4l2_subdev *sd,
465 		struct tvp514x_decoder *decoder)
466 {
467 	int err;
468 
469 	/* common register initialization */
470 	err =
471 	    tvp514x_write_regs(sd, decoder->tvp514x_regs);
472 	if (err)
473 		return err;
474 
475 	if (debug)
476 		tvp514x_reg_dump(sd);
477 
478 	return 0;
479 }
480 
481 /**
482  * tvp514x_detect() - Detect if an tvp514x is present, and if so which revision.
483  * @sd: pointer to standard V4L2 sub-device structure
484  * @decoder: pointer to tvp514x_decoder structure
485  *
486  * A device is considered to be detected if the chip ID (LSB and MSB)
487  * registers match the expected values.
488  * Any value of the rom version register is accepted.
489  * Returns ENODEV error number if no device is detected, or zero
490  * if a device is detected.
491  */
492 static int tvp514x_detect(struct v4l2_subdev *sd,
493 		struct tvp514x_decoder *decoder)
494 {
495 	u8 chip_id_msb, chip_id_lsb, rom_ver;
496 	struct i2c_client *client = v4l2_get_subdevdata(sd);
497 
498 	chip_id_msb = tvp514x_read_reg(sd, REG_CHIP_ID_MSB);
499 	chip_id_lsb = tvp514x_read_reg(sd, REG_CHIP_ID_LSB);
500 	rom_ver = tvp514x_read_reg(sd, REG_ROM_VERSION);
501 
502 	v4l2_dbg(1, debug, sd,
503 		 "chip id detected msb:0x%x lsb:0x%x rom version:0x%x\n",
504 		 chip_id_msb, chip_id_lsb, rom_ver);
505 	if ((chip_id_msb != TVP514X_CHIP_ID_MSB)
506 		|| ((chip_id_lsb != TVP5146_CHIP_ID_LSB)
507 		&& (chip_id_lsb != TVP5147_CHIP_ID_LSB))) {
508 		/* We didn't read the values we expected, so this must not be
509 		 * an TVP5146/47.
510 		 */
511 		v4l2_err(sd, "chip id mismatch msb:0x%x lsb:0x%x\n",
512 				chip_id_msb, chip_id_lsb);
513 		return -ENODEV;
514 	}
515 
516 	decoder->ver = rom_ver;
517 
518 	v4l2_info(sd, "%s (Version - 0x%.2x) found at 0x%x (%s)\n",
519 			client->name, decoder->ver,
520 			client->addr << 1, client->adapter->name);
521 	return 0;
522 }
523 
524 /**
525  * tvp514x_querystd() - V4L2 decoder interface handler for querystd
526  * @sd: pointer to standard V4L2 sub-device structure
527  * @std_id: standard V4L2 std_id ioctl enum
528  *
529  * Returns the current standard detected by TVP5146/47. If no active input is
530  * detected then *std_id is set to 0 and the function returns 0.
531  */
532 static int tvp514x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std_id)
533 {
534 	struct tvp514x_decoder *decoder = to_decoder(sd);
535 	enum tvp514x_std current_std;
536 	enum tvp514x_input input_sel;
537 	u8 sync_lock_status, lock_mask;
538 
539 	if (std_id == NULL)
540 		return -EINVAL;
541 
542 	/* To query the standard the TVP514x must power on the ADCs. */
543 	if (!decoder->streaming) {
544 		tvp514x_s_stream(sd, 1);
545 		msleep(LOCK_RETRY_DELAY);
546 	}
547 
548 	/* query the current standard */
549 	current_std = tvp514x_query_current_std(sd);
550 	if (current_std == STD_INVALID) {
551 		*std_id = V4L2_STD_UNKNOWN;
552 		return 0;
553 	}
554 
555 	input_sel = decoder->input;
556 
557 	switch (input_sel) {
558 	case INPUT_CVBS_VI1A:
559 	case INPUT_CVBS_VI1B:
560 	case INPUT_CVBS_VI1C:
561 	case INPUT_CVBS_VI2A:
562 	case INPUT_CVBS_VI2B:
563 	case INPUT_CVBS_VI2C:
564 	case INPUT_CVBS_VI3A:
565 	case INPUT_CVBS_VI3B:
566 	case INPUT_CVBS_VI3C:
567 	case INPUT_CVBS_VI4A:
568 		lock_mask = STATUS_CLR_SUBCAR_LOCK_BIT |
569 			STATUS_HORZ_SYNC_LOCK_BIT |
570 			STATUS_VIRT_SYNC_LOCK_BIT;
571 		break;
572 
573 	case INPUT_SVIDEO_VI2A_VI1A:
574 	case INPUT_SVIDEO_VI2B_VI1B:
575 	case INPUT_SVIDEO_VI2C_VI1C:
576 	case INPUT_SVIDEO_VI2A_VI3A:
577 	case INPUT_SVIDEO_VI2B_VI3B:
578 	case INPUT_SVIDEO_VI2C_VI3C:
579 	case INPUT_SVIDEO_VI4A_VI1A:
580 	case INPUT_SVIDEO_VI4A_VI1B:
581 	case INPUT_SVIDEO_VI4A_VI1C:
582 	case INPUT_SVIDEO_VI4A_VI3A:
583 	case INPUT_SVIDEO_VI4A_VI3B:
584 	case INPUT_SVIDEO_VI4A_VI3C:
585 		lock_mask = STATUS_HORZ_SYNC_LOCK_BIT |
586 			STATUS_VIRT_SYNC_LOCK_BIT;
587 		break;
588 		/*Need to add other interfaces*/
589 	default:
590 		return -EINVAL;
591 	}
592 	/* check whether signal is locked */
593 	sync_lock_status = tvp514x_read_reg(sd, REG_STATUS1);
594 	if (lock_mask != (sync_lock_status & lock_mask)) {
595 		*std_id = V4L2_STD_UNKNOWN;
596 		return 0;	/* No input detected */
597 	}
598 
599 	*std_id &= decoder->std_list[current_std].standard.id;
600 
601 	v4l2_dbg(1, debug, sd, "Current STD: %s\n",
602 			decoder->std_list[current_std].standard.name);
603 	return 0;
604 }
605 
606 /**
607  * tvp514x_s_std() - V4L2 decoder interface handler for s_std
608  * @sd: pointer to standard V4L2 sub-device structure
609  * @std_id: standard V4L2 v4l2_std_id ioctl enum
610  *
611  * If std_id is supported, sets the requested standard. Otherwise, returns
612  * -EINVAL
613  */
614 static int tvp514x_s_std(struct v4l2_subdev *sd, v4l2_std_id std_id)
615 {
616 	struct tvp514x_decoder *decoder = to_decoder(sd);
617 	int err, i;
618 
619 	for (i = 0; i < decoder->num_stds; i++)
620 		if (std_id & decoder->std_list[i].standard.id)
621 			break;
622 
623 	if ((i == decoder->num_stds) || (i == STD_INVALID))
624 		return -EINVAL;
625 
626 	err = tvp514x_write_reg(sd, REG_VIDEO_STD,
627 				decoder->std_list[i].video_std);
628 	if (err)
629 		return err;
630 
631 	decoder->current_std = i;
632 	decoder->tvp514x_regs[REG_VIDEO_STD].val =
633 		decoder->std_list[i].video_std;
634 
635 	v4l2_dbg(1, debug, sd, "Standard set to: %s\n",
636 			decoder->std_list[i].standard.name);
637 	return 0;
638 }
639 
640 /**
641  * tvp514x_s_routing() - V4L2 decoder interface handler for s_routing
642  * @sd: pointer to standard V4L2 sub-device structure
643  * @input: input selector for routing the signal
644  * @output: output selector for routing the signal
645  * @config: config value. Not used
646  *
647  * If index is valid, selects the requested input. Otherwise, returns -EINVAL if
648  * the input is not supported or there is no active signal present in the
649  * selected input.
650  */
651 static int tvp514x_s_routing(struct v4l2_subdev *sd,
652 				u32 input, u32 output, u32 config)
653 {
654 	struct tvp514x_decoder *decoder = to_decoder(sd);
655 	int err;
656 	enum tvp514x_input input_sel;
657 	enum tvp514x_output output_sel;
658 
659 	if ((input >= INPUT_INVALID) ||
660 			(output >= OUTPUT_INVALID))
661 		/* Index out of bound */
662 		return -EINVAL;
663 
664 	input_sel = input;
665 	output_sel = output;
666 
667 	err = tvp514x_write_reg(sd, REG_INPUT_SEL, input_sel);
668 	if (err)
669 		return err;
670 
671 	output_sel |= tvp514x_read_reg(sd,
672 			REG_OUTPUT_FORMATTER1) & 0x7;
673 	err = tvp514x_write_reg(sd, REG_OUTPUT_FORMATTER1,
674 			output_sel);
675 	if (err)
676 		return err;
677 
678 	decoder->tvp514x_regs[REG_INPUT_SEL].val = input_sel;
679 	decoder->tvp514x_regs[REG_OUTPUT_FORMATTER1].val = output_sel;
680 	decoder->input = input;
681 	decoder->output = output;
682 
683 	v4l2_dbg(1, debug, sd, "Input set to: %d\n", input_sel);
684 
685 	return 0;
686 }
687 
688 /**
689  * tvp514x_s_ctrl() - V4L2 decoder interface handler for s_ctrl
690  * @ctrl: pointer to v4l2_ctrl structure
691  *
692  * If the requested control is supported, sets the control's current
693  * value in HW. Otherwise, returns -EINVAL if the control is not supported.
694  */
695 static int tvp514x_s_ctrl(struct v4l2_ctrl *ctrl)
696 {
697 	struct v4l2_subdev *sd = to_sd(ctrl);
698 	struct tvp514x_decoder *decoder = to_decoder(sd);
699 	int err = -EINVAL, value;
700 
701 	value = ctrl->val;
702 
703 	switch (ctrl->id) {
704 	case V4L2_CID_BRIGHTNESS:
705 		err = tvp514x_write_reg(sd, REG_BRIGHTNESS, value);
706 		if (!err)
707 			decoder->tvp514x_regs[REG_BRIGHTNESS].val = value;
708 		break;
709 	case V4L2_CID_CONTRAST:
710 		err = tvp514x_write_reg(sd, REG_CONTRAST, value);
711 		if (!err)
712 			decoder->tvp514x_regs[REG_CONTRAST].val = value;
713 		break;
714 	case V4L2_CID_SATURATION:
715 		err = tvp514x_write_reg(sd, REG_SATURATION, value);
716 		if (!err)
717 			decoder->tvp514x_regs[REG_SATURATION].val = value;
718 		break;
719 	case V4L2_CID_HUE:
720 		if (value == 180)
721 			value = 0x7F;
722 		else if (value == -180)
723 			value = 0x80;
724 		err = tvp514x_write_reg(sd, REG_HUE, value);
725 		if (!err)
726 			decoder->tvp514x_regs[REG_HUE].val = value;
727 		break;
728 	case V4L2_CID_AUTOGAIN:
729 		err = tvp514x_write_reg(sd, REG_AFE_GAIN_CTRL, value ? 0x0f : 0x0c);
730 		if (!err)
731 			decoder->tvp514x_regs[REG_AFE_GAIN_CTRL].val = value;
732 		break;
733 	}
734 
735 	v4l2_dbg(1, debug, sd, "Set Control: ID - %d - %d\n",
736 			ctrl->id, ctrl->val);
737 	return err;
738 }
739 
740 /**
741  * tvp514x_g_frame_interval() - V4L2 decoder interface handler
742  * @sd: pointer to standard V4L2 sub-device structure
743  * @ival: pointer to a v4l2_subdev_frame_interval structure
744  *
745  * Returns the decoder's video CAPTURE parameters.
746  */
747 static int
748 tvp514x_g_frame_interval(struct v4l2_subdev *sd,
749 			 struct v4l2_subdev_frame_interval *ival)
750 {
751 	struct tvp514x_decoder *decoder = to_decoder(sd);
752 	enum tvp514x_std current_std;
753 
754 
755 	/* get the current standard */
756 	current_std = decoder->current_std;
757 
758 	ival->interval =
759 		decoder->std_list[current_std].standard.frameperiod;
760 
761 	return 0;
762 }
763 
764 /**
765  * tvp514x_s_frame_interval() - V4L2 decoder interface handler
766  * @sd: pointer to standard V4L2 sub-device structure
767  * @ival: pointer to a v4l2_subdev_frame_interval structure
768  *
769  * Configures the decoder to use the input parameters, if possible. If
770  * not possible, returns the appropriate error code.
771  */
772 static int
773 tvp514x_s_frame_interval(struct v4l2_subdev *sd,
774 			 struct v4l2_subdev_frame_interval *ival)
775 {
776 	struct tvp514x_decoder *decoder = to_decoder(sd);
777 	struct v4l2_fract *timeperframe;
778 	enum tvp514x_std current_std;
779 
780 
781 	timeperframe = &ival->interval;
782 
783 	/* get the current standard */
784 	current_std = decoder->current_std;
785 
786 	*timeperframe =
787 	    decoder->std_list[current_std].standard.frameperiod;
788 
789 	return 0;
790 }
791 
792 /**
793  * tvp514x_s_stream() - V4L2 decoder i/f handler for s_stream
794  * @sd: pointer to standard V4L2 sub-device structure
795  * @enable: streaming enable or disable
796  *
797  * Sets streaming to enable or disable, if possible.
798  */
799 static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable)
800 {
801 	int err = 0;
802 	struct tvp514x_decoder *decoder = to_decoder(sd);
803 
804 	if (decoder->streaming == enable)
805 		return 0;
806 
807 	switch (enable) {
808 	case 0:
809 	{
810 		/* Power Down Sequence */
811 		err = tvp514x_write_reg(sd, REG_OPERATION_MODE, 0x01);
812 		if (err) {
813 			v4l2_err(sd, "Unable to turn off decoder\n");
814 			return err;
815 		}
816 		decoder->streaming = enable;
817 		break;
818 	}
819 	case 1:
820 	{
821 		/* Power Up Sequence */
822 		err = tvp514x_write_regs(sd, decoder->int_seq);
823 		if (err) {
824 			v4l2_err(sd, "Unable to turn on decoder\n");
825 			return err;
826 		}
827 		/* Detect if not already detected */
828 		err = tvp514x_detect(sd, decoder);
829 		if (err) {
830 			v4l2_err(sd, "Unable to detect decoder\n");
831 			return err;
832 		}
833 		err = tvp514x_configure(sd, decoder);
834 		if (err) {
835 			v4l2_err(sd, "Unable to configure decoder\n");
836 			return err;
837 		}
838 		decoder->streaming = enable;
839 		break;
840 	}
841 	default:
842 		err = -ENODEV;
843 		break;
844 	}
845 
846 	return err;
847 }
848 
849 static const struct v4l2_ctrl_ops tvp514x_ctrl_ops = {
850 	.s_ctrl = tvp514x_s_ctrl,
851 };
852 
853 /**
854  * tvp514x_enum_mbus_code() - V4L2 decoder interface handler for enum_mbus_code
855  * @sd: pointer to standard V4L2 sub-device structure
856  * @sd_state: subdev state
857  * @code: pointer to v4l2_subdev_mbus_code_enum structure
858  *
859  * Enumertaes mbus codes supported
860  */
861 static int tvp514x_enum_mbus_code(struct v4l2_subdev *sd,
862 				  struct v4l2_subdev_state *sd_state,
863 				  struct v4l2_subdev_mbus_code_enum *code)
864 {
865 	u32 pad = code->pad;
866 	u32 index = code->index;
867 
868 	memset(code, 0, sizeof(*code));
869 	code->index = index;
870 	code->pad = pad;
871 
872 	if (index != 0)
873 		return -EINVAL;
874 
875 	code->code = MEDIA_BUS_FMT_UYVY8_2X8;
876 
877 	return 0;
878 }
879 
880 /**
881  * tvp514x_get_pad_format() - V4L2 decoder interface handler for get pad format
882  * @sd: pointer to standard V4L2 sub-device structure
883  * @sd_state: subdev state
884  * @format: pointer to v4l2_subdev_format structure
885  *
886  * Retrieves pad format which is active or tried based on requirement
887  */
888 static int tvp514x_get_pad_format(struct v4l2_subdev *sd,
889 				  struct v4l2_subdev_state *sd_state,
890 				  struct v4l2_subdev_format *format)
891 {
892 	struct tvp514x_decoder *decoder = to_decoder(sd);
893 	__u32 which = format->which;
894 
895 	if (format->pad)
896 		return -EINVAL;
897 
898 	if (which == V4L2_SUBDEV_FORMAT_ACTIVE) {
899 		format->format = decoder->format;
900 		return 0;
901 	}
902 
903 	format->format.code = MEDIA_BUS_FMT_UYVY8_2X8;
904 	format->format.width = tvp514x_std_list[decoder->current_std].width;
905 	format->format.height = tvp514x_std_list[decoder->current_std].height;
906 	format->format.colorspace = V4L2_COLORSPACE_SMPTE170M;
907 	format->format.field = V4L2_FIELD_INTERLACED;
908 
909 	return 0;
910 }
911 
912 /**
913  * tvp514x_set_pad_format() - V4L2 decoder interface handler for set pad format
914  * @sd: pointer to standard V4L2 sub-device structure
915  * @sd_state: subdev state
916  * @fmt: pointer to v4l2_subdev_format structure
917  *
918  * Set pad format for the output pad
919  */
920 static int tvp514x_set_pad_format(struct v4l2_subdev *sd,
921 				  struct v4l2_subdev_state *sd_state,
922 				  struct v4l2_subdev_format *fmt)
923 {
924 	struct tvp514x_decoder *decoder = to_decoder(sd);
925 
926 	if (fmt->format.field != V4L2_FIELD_INTERLACED ||
927 	    fmt->format.code != MEDIA_BUS_FMT_UYVY8_2X8 ||
928 	    fmt->format.colorspace != V4L2_COLORSPACE_SMPTE170M ||
929 	    fmt->format.width != tvp514x_std_list[decoder->current_std].width ||
930 	    fmt->format.height != tvp514x_std_list[decoder->current_std].height)
931 		return -EINVAL;
932 
933 	decoder->format = fmt->format;
934 
935 	return 0;
936 }
937 
938 static const struct v4l2_subdev_video_ops tvp514x_video_ops = {
939 	.s_std = tvp514x_s_std,
940 	.s_routing = tvp514x_s_routing,
941 	.querystd = tvp514x_querystd,
942 	.g_frame_interval = tvp514x_g_frame_interval,
943 	.s_frame_interval = tvp514x_s_frame_interval,
944 	.s_stream = tvp514x_s_stream,
945 };
946 
947 static const struct v4l2_subdev_pad_ops tvp514x_pad_ops = {
948 	.enum_mbus_code = tvp514x_enum_mbus_code,
949 	.get_fmt = tvp514x_get_pad_format,
950 	.set_fmt = tvp514x_set_pad_format,
951 };
952 
953 static const struct v4l2_subdev_ops tvp514x_ops = {
954 	.video = &tvp514x_video_ops,
955 	.pad = &tvp514x_pad_ops,
956 };
957 
958 static const struct tvp514x_decoder tvp514x_dev = {
959 	.streaming = 0,
960 	.fmt_list = tvp514x_fmt_list,
961 	.num_fmts = ARRAY_SIZE(tvp514x_fmt_list),
962 	.pix = {
963 		/* Default to NTSC 8-bit YUV 422 */
964 		.width		= NTSC_NUM_ACTIVE_PIXELS,
965 		.height		= NTSC_NUM_ACTIVE_LINES,
966 		.pixelformat	= V4L2_PIX_FMT_UYVY,
967 		.field		= V4L2_FIELD_INTERLACED,
968 		.bytesperline	= NTSC_NUM_ACTIVE_PIXELS * 2,
969 		.sizeimage	= NTSC_NUM_ACTIVE_PIXELS * 2 *
970 					NTSC_NUM_ACTIVE_LINES,
971 		.colorspace	= V4L2_COLORSPACE_SMPTE170M,
972 		},
973 	.current_std = STD_NTSC_MJ,
974 	.std_list = tvp514x_std_list,
975 	.num_stds = ARRAY_SIZE(tvp514x_std_list),
976 
977 };
978 
979 static struct tvp514x_platform_data *
980 tvp514x_get_pdata(struct i2c_client *client)
981 {
982 	struct tvp514x_platform_data *pdata = NULL;
983 	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
984 	struct device_node *endpoint;
985 	unsigned int flags;
986 
987 	if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
988 		return client->dev.platform_data;
989 
990 	endpoint = of_graph_get_next_endpoint(client->dev.of_node, NULL);
991 	if (!endpoint)
992 		return NULL;
993 
994 	if (v4l2_fwnode_endpoint_parse(of_fwnode_handle(endpoint), &bus_cfg))
995 		goto done;
996 
997 	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
998 	if (!pdata)
999 		goto done;
1000 
1001 	flags = bus_cfg.bus.parallel.flags;
1002 
1003 	if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
1004 		pdata->hs_polarity = 1;
1005 
1006 	if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
1007 		pdata->vs_polarity = 1;
1008 
1009 	if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
1010 		pdata->clk_polarity = 1;
1011 
1012 done:
1013 	of_node_put(endpoint);
1014 	return pdata;
1015 }
1016 
1017 /**
1018  * tvp514x_probe() - decoder driver i2c probe handler
1019  * @client: i2c driver client device structure
1020  * @id: i2c driver id table
1021  *
1022  * Register decoder as an i2c client device and V4L2
1023  * device.
1024  */
1025 static int
1026 tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
1027 {
1028 	struct tvp514x_platform_data *pdata = tvp514x_get_pdata(client);
1029 	struct tvp514x_decoder *decoder;
1030 	struct v4l2_subdev *sd;
1031 	int ret;
1032 
1033 	if (pdata == NULL) {
1034 		dev_err(&client->dev, "No platform data\n");
1035 		return -EINVAL;
1036 	}
1037 
1038 	/* Check if the adapter supports the needed features */
1039 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
1040 		return -EIO;
1041 
1042 	decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
1043 	if (!decoder)
1044 		return -ENOMEM;
1045 
1046 	/* Initialize the tvp514x_decoder with default configuration */
1047 	*decoder = tvp514x_dev;
1048 	/* Copy default register configuration */
1049 	memcpy(decoder->tvp514x_regs, tvp514x_reg_list_default,
1050 			sizeof(tvp514x_reg_list_default));
1051 
1052 	decoder->int_seq = (struct tvp514x_reg *)id->driver_data;
1053 
1054 	/* Copy board specific information here */
1055 	decoder->pdata = pdata;
1056 
1057 	/**
1058 	 * Fetch platform specific data, and configure the
1059 	 * tvp514x_reg_list[] accordingly. Since this is one
1060 	 * time configuration, no need to preserve.
1061 	 */
1062 	decoder->tvp514x_regs[REG_OUTPUT_FORMATTER2].val |=
1063 		(decoder->pdata->clk_polarity << 1);
1064 	decoder->tvp514x_regs[REG_SYNC_CONTROL].val |=
1065 		((decoder->pdata->hs_polarity << 2) |
1066 		 (decoder->pdata->vs_polarity << 3));
1067 	/* Set default standard to auto */
1068 	decoder->tvp514x_regs[REG_VIDEO_STD].val =
1069 		VIDEO_STD_AUTO_SWITCH_BIT;
1070 
1071 	/* Register with V4L2 layer as slave device */
1072 	sd = &decoder->sd;
1073 	v4l2_i2c_subdev_init(sd, client, &tvp514x_ops);
1074 
1075 #if defined(CONFIG_MEDIA_CONTROLLER)
1076 	decoder->pad.flags = MEDIA_PAD_FL_SOURCE;
1077 	decoder->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1078 	decoder->sd.entity.function = MEDIA_ENT_F_ATV_DECODER;
1079 
1080 	ret = media_entity_pads_init(&decoder->sd.entity, 1, &decoder->pad);
1081 	if (ret < 0) {
1082 		v4l2_err(sd, "%s decoder driver failed to register !!\n",
1083 			 sd->name);
1084 		return ret;
1085 	}
1086 #endif
1087 	v4l2_ctrl_handler_init(&decoder->hdl, 5);
1088 	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
1089 		V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
1090 	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
1091 		V4L2_CID_CONTRAST, 0, 255, 1, 128);
1092 	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
1093 		V4L2_CID_SATURATION, 0, 255, 1, 128);
1094 	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
1095 		V4L2_CID_HUE, -180, 180, 180, 0);
1096 	v4l2_ctrl_new_std(&decoder->hdl, &tvp514x_ctrl_ops,
1097 		V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
1098 	sd->ctrl_handler = &decoder->hdl;
1099 	if (decoder->hdl.error) {
1100 		ret = decoder->hdl.error;
1101 		goto done;
1102 	}
1103 	v4l2_ctrl_handler_setup(&decoder->hdl);
1104 
1105 	ret = v4l2_async_register_subdev(&decoder->sd);
1106 	if (!ret)
1107 		v4l2_info(sd, "%s decoder driver registered !!\n", sd->name);
1108 
1109 done:
1110 	if (ret < 0) {
1111 		v4l2_ctrl_handler_free(&decoder->hdl);
1112 		media_entity_cleanup(&decoder->sd.entity);
1113 	}
1114 	return ret;
1115 }
1116 
1117 /**
1118  * tvp514x_remove() - decoder driver i2c remove handler
1119  * @client: i2c driver client device structure
1120  *
1121  * Unregister decoder as an i2c client device and V4L2
1122  * device. Complement of tvp514x_probe().
1123  */
1124 static void tvp514x_remove(struct i2c_client *client)
1125 {
1126 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
1127 	struct tvp514x_decoder *decoder = to_decoder(sd);
1128 
1129 	v4l2_async_unregister_subdev(&decoder->sd);
1130 	media_entity_cleanup(&decoder->sd.entity);
1131 	v4l2_ctrl_handler_free(&decoder->hdl);
1132 }
1133 /* TVP5146 Init/Power on Sequence */
1134 static const struct tvp514x_reg tvp5146_init_reg_seq[] = {
1135 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
1136 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1137 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
1138 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1139 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
1140 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1141 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
1142 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1143 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
1144 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
1145 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
1146 	{TOK_TERM, 0, 0},
1147 };
1148 
1149 /* TVP5147 Init/Power on Sequence */
1150 static const struct tvp514x_reg tvp5147_init_reg_seq[] =	{
1151 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x02},
1152 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1153 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0x80},
1154 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1155 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
1156 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1157 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
1158 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x01},
1159 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x16},
1160 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1161 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xA0},
1162 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x16},
1163 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS1, 0x60},
1164 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS2, 0x00},
1165 	{TOK_WRITE, REG_VBUS_ADDRESS_ACCESS3, 0xB0},
1166 	{TOK_WRITE, REG_VBUS_DATA_ACCESS_NO_VBUS_ADDR_INCR, 0x00},
1167 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
1168 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
1169 	{TOK_TERM, 0, 0},
1170 };
1171 
1172 /* TVP5146M2/TVP5147M1 Init/Power on Sequence */
1173 static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
1174 	{TOK_WRITE, REG_OPERATION_MODE, 0x01},
1175 	{TOK_WRITE, REG_OPERATION_MODE, 0x00},
1176 	{TOK_TERM, 0, 0},
1177 };
1178 
1179 /*
1180  * I2C Device Table -
1181  *
1182  * name - Name of the actual device/chip.
1183  * driver_data - Driver data
1184  */
1185 static const struct i2c_device_id tvp514x_id[] = {
1186 	{"tvp5146", (unsigned long)tvp5146_init_reg_seq},
1187 	{"tvp5146m2", (unsigned long)tvp514xm_init_reg_seq},
1188 	{"tvp5147", (unsigned long)tvp5147_init_reg_seq},
1189 	{"tvp5147m1", (unsigned long)tvp514xm_init_reg_seq},
1190 	{},
1191 };
1192 
1193 MODULE_DEVICE_TABLE(i2c, tvp514x_id);
1194 
1195 #if IS_ENABLED(CONFIG_OF)
1196 static const struct of_device_id tvp514x_of_match[] = {
1197 	{ .compatible = "ti,tvp5146", },
1198 	{ .compatible = "ti,tvp5146m2", },
1199 	{ .compatible = "ti,tvp5147", },
1200 	{ .compatible = "ti,tvp5147m1", },
1201 	{ /* sentinel */ },
1202 };
1203 MODULE_DEVICE_TABLE(of, tvp514x_of_match);
1204 #endif
1205 
1206 static struct i2c_driver tvp514x_driver = {
1207 	.driver = {
1208 		.of_match_table = of_match_ptr(tvp514x_of_match),
1209 		.name = TVP514X_MODULE_NAME,
1210 	},
1211 	.probe = tvp514x_probe,
1212 	.remove = tvp514x_remove,
1213 	.id_table = tvp514x_id,
1214 };
1215 
1216 module_i2c_driver(tvp514x_driver);
1217