1 /* 2 * For the STS-Thompson TDA7432 audio processor chip 3 * 4 * Handles audio functions: volume, balance, tone, loudness 5 * This driver will not complain if used with any 6 * other i2c device with the same address. 7 * 8 * Muting and tone control by Jonathan Isom <jisom@ematic.com> 9 * 10 * Copyright (c) 2000 Eric Sandeen <eric_sandeen@bigfoot.com> 11 * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@kernel.org> 12 * This code is placed under the terms of the GNU General Public License 13 * Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu) 14 * Which was based on tda8425.c by Greg Alexander (c) 1998 15 * 16 * OPTIONS: 17 * debug - set to 1 if you'd like to see debug messages 18 * set to 2 if you'd like to be inundated with debug messages 19 * 20 * loudness - set between 0 and 15 for varying degrees of loudness effect 21 * 22 * maxvol - set maximum volume to +20db (1), default is 0db(0) 23 */ 24 25 #include <linux/module.h> 26 #include <linux/init.h> 27 #include <linux/kernel.h> 28 #include <linux/string.h> 29 #include <linux/timer.h> 30 #include <linux/delay.h> 31 #include <linux/errno.h> 32 #include <linux/slab.h> 33 #include <linux/videodev2.h> 34 #include <linux/i2c.h> 35 36 #include <media/v4l2-device.h> 37 #include <media/v4l2-ioctl.h> 38 #include <media/v4l2-ctrls.h> 39 40 #ifndef VIDEO_AUDIO_BALANCE 41 # define VIDEO_AUDIO_BALANCE 32 42 #endif 43 44 MODULE_AUTHOR("Eric Sandeen <eric_sandeen@bigfoot.com>"); 45 MODULE_DESCRIPTION("bttv driver for the tda7432 audio processor chip"); 46 MODULE_LICENSE("GPL"); 47 48 static int maxvol; 49 static int loudness; /* disable loudness by default */ 50 static int debug; /* insmod parameter */ 51 module_param(debug, int, S_IRUGO | S_IWUSR); 52 MODULE_PARM_DESC(debug, "Set debugging level from 0 to 3. Default is off(0)."); 53 module_param(loudness, int, S_IRUGO); 54 MODULE_PARM_DESC(loudness, "Turn loudness on(1) else off(0). Default is off(0)."); 55 module_param(maxvol, int, S_IRUGO | S_IWUSR); 56 MODULE_PARM_DESC(maxvol, "Set maximum volume to +20dB(0) else +0dB(1). Default is +20dB(0)."); 57 58 59 /* Structure of address and subaddresses for the tda7432 */ 60 61 struct tda7432 { 62 struct v4l2_subdev sd; 63 struct v4l2_ctrl_handler hdl; 64 struct { 65 /* bass/treble cluster */ 66 struct v4l2_ctrl *bass; 67 struct v4l2_ctrl *treble; 68 }; 69 struct { 70 /* mute/balance cluster */ 71 struct v4l2_ctrl *mute; 72 struct v4l2_ctrl *balance; 73 }; 74 }; 75 76 static inline struct tda7432 *to_state(struct v4l2_subdev *sd) 77 { 78 return container_of(sd, struct tda7432, sd); 79 } 80 81 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) 82 { 83 return &container_of(ctrl->handler, struct tda7432, hdl)->sd; 84 } 85 86 /* The TDA7432 is made by STS-Thompson 87 * http://www.st.com 88 * http://us.st.com/stonline/books/pdf/docs/4056.pdf 89 * 90 * TDA7432: I2C-bus controlled basic audio processor 91 * 92 * The TDA7432 controls basic audio functions like volume, balance, 93 * and tone control (including loudness). It also has four channel 94 * output (for front and rear). Since most vidcap cards probably 95 * don't have 4 channel output, this driver will set front & rear 96 * together (no independent control). 97 */ 98 99 /* Subaddresses for TDA7432 */ 100 101 #define TDA7432_IN 0x00 /* Input select */ 102 #define TDA7432_VL 0x01 /* Volume */ 103 #define TDA7432_TN 0x02 /* Bass, Treble (Tone) */ 104 #define TDA7432_LF 0x03 /* Attenuation LF (Left Front) */ 105 #define TDA7432_LR 0x04 /* Attenuation LR (Left Rear) */ 106 #define TDA7432_RF 0x05 /* Attenuation RF (Right Front) */ 107 #define TDA7432_RR 0x06 /* Attenuation RR (Right Rear) */ 108 #define TDA7432_LD 0x07 /* Loudness */ 109 110 111 /* Masks for bits in TDA7432 subaddresses */ 112 113 /* Many of these not used - just for documentation */ 114 115 /* Subaddress 0x00 - Input selection and bass control */ 116 117 /* Bits 0,1,2 control input: 118 * 0x00 - Stereo input 119 * 0x02 - Mono input 120 * 0x03 - Mute (Using Attenuators Plays better with modules) 121 * Mono probably isn't used - I'm guessing only the stereo 122 * input is connected on most cards, so we'll set it to stereo. 123 * 124 * Bit 3 controls bass cut: 0/1 is non-symmetric/symmetric bass cut 125 * Bit 4 controls bass range: 0/1 is extended/standard bass range 126 * 127 * Highest 3 bits not used 128 */ 129 130 #define TDA7432_STEREO_IN 0 131 #define TDA7432_MONO_IN 2 /* Probably won't be used */ 132 #define TDA7432_BASS_SYM 1 << 3 133 #define TDA7432_BASS_NORM 1 << 4 134 135 /* Subaddress 0x01 - Volume */ 136 137 /* Lower 7 bits control volume from -79dB to +32dB in 1dB steps 138 * Recommended maximum is +20 dB 139 * 140 * +32dB: 0x00 141 * +20dB: 0x0c 142 * 0dB: 0x20 143 * -79dB: 0x6f 144 * 145 * MSB (bit 7) controls loudness: 1/0 is loudness on/off 146 */ 147 148 #define TDA7432_VOL_0DB 0x20 149 #define TDA7432_LD_ON 1 << 7 150 151 152 /* Subaddress 0x02 - Tone control */ 153 154 /* Bits 0,1,2 control absolute treble gain from 0dB to 14dB 155 * 0x0 is 14dB, 0x7 is 0dB 156 * 157 * Bit 3 controls treble attenuation/gain (sign) 158 * 1 = gain (+) 159 * 0 = attenuation (-) 160 * 161 * Bits 4,5,6 control absolute bass gain from 0dB to 14dB 162 * (This is only true for normal base range, set in 0x00) 163 * 0x0 << 4 is 14dB, 0x7 is 0dB 164 * 165 * Bit 7 controls bass attenuation/gain (sign) 166 * 1 << 7 = gain (+) 167 * 0 << 7 = attenuation (-) 168 * 169 * Example: 170 * 1 1 0 1 0 1 0 1 is +4dB bass, -4dB treble 171 */ 172 173 #define TDA7432_TREBLE_0DB 0xf 174 #define TDA7432_TREBLE 7 175 #define TDA7432_TREBLE_GAIN 1 << 3 176 #define TDA7432_BASS_0DB 0xf 177 #define TDA7432_BASS 7 << 4 178 #define TDA7432_BASS_GAIN 1 << 7 179 180 181 /* Subaddress 0x03 - Left Front attenuation */ 182 /* Subaddress 0x04 - Left Rear attenuation */ 183 /* Subaddress 0x05 - Right Front attenuation */ 184 /* Subaddress 0x06 - Right Rear attenuation */ 185 186 /* Bits 0,1,2,3,4 control attenuation from 0dB to -37.5dB 187 * in 1.5dB steps. 188 * 189 * 0x00 is 0dB 190 * 0x1f is -37.5dB 191 * 192 * Bit 5 mutes that channel when set (1 = mute, 0 = unmute) 193 * We'll use the mute on the input, though (above) 194 * Bits 6,7 unused 195 */ 196 197 #define TDA7432_ATTEN_0DB 0x00 198 #define TDA7432_MUTE 0x1 << 5 199 200 201 /* Subaddress 0x07 - Loudness Control */ 202 203 /* Bits 0,1,2,3 control loudness from 0dB to -15dB in 1dB steps 204 * when bit 4 is NOT set 205 * 206 * 0x0 is 0dB 207 * 0xf is -15dB 208 * 209 * If bit 4 is set, then there is a flat attenuation according to 210 * the lower 4 bits, as above. 211 * 212 * Bits 5,6,7 unused 213 */ 214 215 216 217 /* Begin code */ 218 219 static int tda7432_write(struct v4l2_subdev *sd, int subaddr, int val) 220 { 221 struct i2c_client *client = v4l2_get_subdevdata(sd); 222 unsigned char buffer[2]; 223 224 v4l2_dbg(2, debug, sd, "In tda7432_write\n"); 225 v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val); 226 buffer[0] = subaddr; 227 buffer[1] = val; 228 if (2 != i2c_master_send(client, buffer, 2)) { 229 v4l2_err(sd, "I/O error, trying (write %d 0x%x)\n", 230 subaddr, val); 231 return -1; 232 } 233 return 0; 234 } 235 236 static int tda7432_set(struct v4l2_subdev *sd) 237 { 238 struct i2c_client *client = v4l2_get_subdevdata(sd); 239 unsigned char buf[16]; 240 241 buf[0] = TDA7432_IN; 242 buf[1] = TDA7432_STEREO_IN | /* Main (stereo) input */ 243 TDA7432_BASS_SYM | /* Symmetric bass cut */ 244 TDA7432_BASS_NORM; /* Normal bass range */ 245 buf[2] = 0x3b; 246 if (loudness) /* Turn loudness on? */ 247 buf[2] |= TDA7432_LD_ON; 248 buf[3] = TDA7432_TREBLE_0DB | (TDA7432_BASS_0DB << 4); 249 buf[4] = TDA7432_ATTEN_0DB; 250 buf[5] = TDA7432_ATTEN_0DB; 251 buf[6] = TDA7432_ATTEN_0DB; 252 buf[7] = TDA7432_ATTEN_0DB; 253 buf[8] = loudness; 254 if (9 != i2c_master_send(client, buf, 9)) { 255 v4l2_err(sd, "I/O error, trying tda7432_set\n"); 256 return -1; 257 } 258 259 return 0; 260 } 261 262 static int tda7432_log_status(struct v4l2_subdev *sd) 263 { 264 struct tda7432 *state = to_state(sd); 265 266 v4l2_ctrl_handler_log_status(&state->hdl, sd->name); 267 return 0; 268 } 269 270 static int tda7432_s_ctrl(struct v4l2_ctrl *ctrl) 271 { 272 struct v4l2_subdev *sd = to_sd(ctrl); 273 struct tda7432 *t = to_state(sd); 274 u8 bass, treble, volume; 275 u8 lf, lr, rf, rr; 276 277 switch (ctrl->id) { 278 case V4L2_CID_AUDIO_MUTE: 279 if (t->balance->val < 0) { 280 /* shifted to left, attenuate right */ 281 rr = rf = -t->balance->val; 282 lr = lf = TDA7432_ATTEN_0DB; 283 } else if (t->balance->val > 0) { 284 /* shifted to right, attenuate left */ 285 rr = rf = TDA7432_ATTEN_0DB; 286 lr = lf = t->balance->val; 287 } else { 288 /* centered */ 289 rr = rf = TDA7432_ATTEN_0DB; 290 lr = lf = TDA7432_ATTEN_0DB; 291 } 292 if (t->mute->val) { 293 lf |= TDA7432_MUTE; 294 lr |= TDA7432_MUTE; 295 rf |= TDA7432_MUTE; 296 rr |= TDA7432_MUTE; 297 } 298 /* Mute & update balance*/ 299 tda7432_write(sd, TDA7432_LF, lf); 300 tda7432_write(sd, TDA7432_LR, lr); 301 tda7432_write(sd, TDA7432_RF, rf); 302 tda7432_write(sd, TDA7432_RR, rr); 303 return 0; 304 case V4L2_CID_AUDIO_VOLUME: 305 volume = 0x6f - ctrl->val; 306 if (loudness) /* Turn on the loudness bit */ 307 volume |= TDA7432_LD_ON; 308 309 tda7432_write(sd, TDA7432_VL, volume); 310 return 0; 311 case V4L2_CID_AUDIO_BASS: 312 bass = t->bass->val; 313 treble = t->treble->val; 314 if (bass >= 0x8) 315 bass = 14 - (bass - 8); 316 if (treble >= 0x8) 317 treble = 14 - (treble - 8); 318 319 tda7432_write(sd, TDA7432_TN, 0x10 | (bass << 4) | treble); 320 return 0; 321 } 322 return -EINVAL; 323 } 324 325 /* ----------------------------------------------------------------------- */ 326 327 static const struct v4l2_ctrl_ops tda7432_ctrl_ops = { 328 .s_ctrl = tda7432_s_ctrl, 329 }; 330 331 static const struct v4l2_subdev_core_ops tda7432_core_ops = { 332 .log_status = tda7432_log_status, 333 }; 334 335 static const struct v4l2_subdev_ops tda7432_ops = { 336 .core = &tda7432_core_ops, 337 }; 338 339 /* ----------------------------------------------------------------------- */ 340 341 /* *********************** * 342 * i2c interface functions * 343 * *********************** */ 344 345 static int tda7432_probe(struct i2c_client *client, 346 const struct i2c_device_id *id) 347 { 348 struct tda7432 *t; 349 struct v4l2_subdev *sd; 350 351 v4l_info(client, "chip found @ 0x%02x (%s)\n", 352 client->addr << 1, client->adapter->name); 353 354 t = devm_kzalloc(&client->dev, sizeof(*t), GFP_KERNEL); 355 if (!t) 356 return -ENOMEM; 357 sd = &t->sd; 358 v4l2_i2c_subdev_init(sd, client, &tda7432_ops); 359 v4l2_ctrl_handler_init(&t->hdl, 5); 360 v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, 361 V4L2_CID_AUDIO_VOLUME, 0, maxvol ? 0x68 : 0x4f, 1, maxvol ? 0x5d : 0x47); 362 t->mute = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, 363 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); 364 t->balance = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, 365 V4L2_CID_AUDIO_BALANCE, -31, 31, 1, 0); 366 t->bass = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, 367 V4L2_CID_AUDIO_BASS, 0, 14, 1, 7); 368 t->treble = v4l2_ctrl_new_std(&t->hdl, &tda7432_ctrl_ops, 369 V4L2_CID_AUDIO_TREBLE, 0, 14, 1, 7); 370 sd->ctrl_handler = &t->hdl; 371 if (t->hdl.error) { 372 int err = t->hdl.error; 373 374 v4l2_ctrl_handler_free(&t->hdl); 375 return err; 376 } 377 v4l2_ctrl_cluster(2, &t->bass); 378 v4l2_ctrl_cluster(2, &t->mute); 379 v4l2_ctrl_handler_setup(&t->hdl); 380 if (loudness < 0 || loudness > 15) { 381 v4l2_warn(sd, "loudness parameter must be between 0 and 15\n"); 382 if (loudness < 0) 383 loudness = 0; 384 if (loudness > 15) 385 loudness = 15; 386 } 387 388 tda7432_set(sd); 389 return 0; 390 } 391 392 static int tda7432_remove(struct i2c_client *client) 393 { 394 struct v4l2_subdev *sd = i2c_get_clientdata(client); 395 struct tda7432 *t = to_state(sd); 396 397 tda7432_set(sd); 398 v4l2_device_unregister_subdev(sd); 399 v4l2_ctrl_handler_free(&t->hdl); 400 return 0; 401 } 402 403 static const struct i2c_device_id tda7432_id[] = { 404 { "tda7432", 0 }, 405 { } 406 }; 407 MODULE_DEVICE_TABLE(i2c, tda7432_id); 408 409 static struct i2c_driver tda7432_driver = { 410 .driver = { 411 .name = "tda7432", 412 }, 413 .probe = tda7432_probe, 414 .remove = tda7432_remove, 415 .id_table = tda7432_id, 416 }; 417 418 module_i2c_driver(tda7432_driver); 419