1 /* 2 * saa7127 - Philips SAA7127/SAA7129 video encoder driver 3 * 4 * Copyright (C) 2003 Roy Bulter <rbulter@hetnet.nl> 5 * 6 * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter 7 * 8 * Copyright (C) 2000-2001 Gillem <htoa@gmx.net> 9 * Copyright (C) 2002 Andreas Oberritter <obi@saftware.de> 10 * 11 * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo 12 * 13 * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org> 14 * 15 * This driver is designed for the Hauppauge 250/350 Linux driver 16 * from the ivtv Project 17 * 18 * Copyright (C) 2003 Kevin Thayer <nufan_wfk@yahoo.com> 19 * 20 * Dual output support: 21 * Copyright (C) 2004 Eric Varsanyi 22 * 23 * NTSC Tuning and 7.5 IRE Setup 24 * Copyright (C) 2004 Chris Kennedy <c@groovy.org> 25 * 26 * VBI additions & cleanup: 27 * Copyright (C) 2004, 2005 Hans Verkuil <hverkuil@xs4all.nl> 28 * 29 * Note: the saa7126 is identical to the saa7127, and the saa7128 is 30 * identical to the saa7129, except that the saa7126 and saa7128 have 31 * macrovision anti-taping support. This driver will almost certainly 32 * work fine for those chips, except of course for the missing anti-taping 33 * support. 34 * 35 * This program is free software; you can redistribute it and/or modify 36 * it under the terms of the GNU General Public License as published by 37 * the Free Software Foundation; either version 2 of the License, or 38 * (at your option) any later version. 39 * 40 * This program is distributed in the hope that it will be useful, 41 * but WITHOUT ANY WARRANTY; without even the implied warranty of 42 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 43 * GNU General Public License for more details. 44 * 45 * You should have received a copy of the GNU General Public License 46 * along with this program; if not, write to the Free Software 47 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 48 */ 49 50 51 #include <linux/kernel.h> 52 #include <linux/module.h> 53 #include <linux/slab.h> 54 #include <linux/i2c.h> 55 #include <linux/videodev2.h> 56 #include <media/v4l2-device.h> 57 #include <media/i2c/saa7127.h> 58 59 static int debug; 60 static int test_image; 61 62 MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver"); 63 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil"); 64 MODULE_LICENSE("GPL"); 65 module_param(debug, int, 0644); 66 module_param(test_image, int, 0644); 67 MODULE_PARM_DESC(debug, "debug level (0-2)"); 68 MODULE_PARM_DESC(test_image, "test_image (0-1)"); 69 70 71 /* 72 * SAA7127 registers 73 */ 74 75 #define SAA7127_REG_STATUS 0x00 76 #define SAA7127_REG_WIDESCREEN_CONFIG 0x26 77 #define SAA7127_REG_WIDESCREEN_ENABLE 0x27 78 #define SAA7127_REG_BURST_START 0x28 79 #define SAA7127_REG_BURST_END 0x29 80 #define SAA7127_REG_COPYGEN_0 0x2a 81 #define SAA7127_REG_COPYGEN_1 0x2b 82 #define SAA7127_REG_COPYGEN_2 0x2c 83 #define SAA7127_REG_OUTPUT_PORT_CONTROL 0x2d 84 #define SAA7127_REG_GAIN_LUMINANCE_RGB 0x38 85 #define SAA7127_REG_GAIN_COLORDIFF_RGB 0x39 86 #define SAA7127_REG_INPUT_PORT_CONTROL_1 0x3a 87 #define SAA7129_REG_FADE_KEY_COL2 0x4f 88 #define SAA7127_REG_CHROMA_PHASE 0x5a 89 #define SAA7127_REG_GAINU 0x5b 90 #define SAA7127_REG_GAINV 0x5c 91 #define SAA7127_REG_BLACK_LEVEL 0x5d 92 #define SAA7127_REG_BLANKING_LEVEL 0x5e 93 #define SAA7127_REG_VBI_BLANKING 0x5f 94 #define SAA7127_REG_DAC_CONTROL 0x61 95 #define SAA7127_REG_BURST_AMP 0x62 96 #define SAA7127_REG_SUBC3 0x63 97 #define SAA7127_REG_SUBC2 0x64 98 #define SAA7127_REG_SUBC1 0x65 99 #define SAA7127_REG_SUBC0 0x66 100 #define SAA7127_REG_LINE_21_ODD_0 0x67 101 #define SAA7127_REG_LINE_21_ODD_1 0x68 102 #define SAA7127_REG_LINE_21_EVEN_0 0x69 103 #define SAA7127_REG_LINE_21_EVEN_1 0x6a 104 #define SAA7127_REG_RCV_PORT_CONTROL 0x6b 105 #define SAA7127_REG_VTRIG 0x6c 106 #define SAA7127_REG_HTRIG_HI 0x6d 107 #define SAA7127_REG_MULTI 0x6e 108 #define SAA7127_REG_CLOSED_CAPTION 0x6f 109 #define SAA7127_REG_RCV2_OUTPUT_START 0x70 110 #define SAA7127_REG_RCV2_OUTPUT_END 0x71 111 #define SAA7127_REG_RCV2_OUTPUT_MSBS 0x72 112 #define SAA7127_REG_TTX_REQUEST_H_START 0x73 113 #define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH 0x74 114 #define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT 0x75 115 #define SAA7127_REG_TTX_ODD_REQ_VERT_START 0x76 116 #define SAA7127_REG_TTX_ODD_REQ_VERT_END 0x77 117 #define SAA7127_REG_TTX_EVEN_REQ_VERT_START 0x78 118 #define SAA7127_REG_TTX_EVEN_REQ_VERT_END 0x79 119 #define SAA7127_REG_FIRST_ACTIVE 0x7a 120 #define SAA7127_REG_LAST_ACTIVE 0x7b 121 #define SAA7127_REG_MSB_VERTICAL 0x7c 122 #define SAA7127_REG_DISABLE_TTX_LINE_LO_0 0x7e 123 #define SAA7127_REG_DISABLE_TTX_LINE_LO_1 0x7f 124 125 /* 126 ********************************************************************** 127 * 128 * Arrays with configuration parameters for the SAA7127 129 * 130 ********************************************************************** 131 */ 132 133 struct i2c_reg_value { 134 unsigned char reg; 135 unsigned char value; 136 }; 137 138 static const struct i2c_reg_value saa7129_init_config_extra[] = { 139 { SAA7127_REG_OUTPUT_PORT_CONTROL, 0x38 }, 140 { SAA7127_REG_VTRIG, 0xfa }, 141 { 0, 0 } 142 }; 143 144 static const struct i2c_reg_value saa7127_init_config_common[] = { 145 { SAA7127_REG_WIDESCREEN_CONFIG, 0x0d }, 146 { SAA7127_REG_WIDESCREEN_ENABLE, 0x00 }, 147 { SAA7127_REG_COPYGEN_0, 0x77 }, 148 { SAA7127_REG_COPYGEN_1, 0x41 }, 149 { SAA7127_REG_COPYGEN_2, 0x00 }, /* Macrovision enable/disable */ 150 { SAA7127_REG_OUTPUT_PORT_CONTROL, 0xbf }, 151 { SAA7127_REG_GAIN_LUMINANCE_RGB, 0x00 }, 152 { SAA7127_REG_GAIN_COLORDIFF_RGB, 0x00 }, 153 { SAA7127_REG_INPUT_PORT_CONTROL_1, 0x80 }, /* for color bars */ 154 { SAA7127_REG_LINE_21_ODD_0, 0x77 }, 155 { SAA7127_REG_LINE_21_ODD_1, 0x41 }, 156 { SAA7127_REG_LINE_21_EVEN_0, 0x88 }, 157 { SAA7127_REG_LINE_21_EVEN_1, 0x41 }, 158 { SAA7127_REG_RCV_PORT_CONTROL, 0x12 }, 159 { SAA7127_REG_VTRIG, 0xf9 }, 160 { SAA7127_REG_HTRIG_HI, 0x00 }, 161 { SAA7127_REG_RCV2_OUTPUT_START, 0x41 }, 162 { SAA7127_REG_RCV2_OUTPUT_END, 0xc3 }, 163 { SAA7127_REG_RCV2_OUTPUT_MSBS, 0x00 }, 164 { SAA7127_REG_TTX_REQUEST_H_START, 0x3e }, 165 { SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH, 0xb8 }, 166 { SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT, 0x03 }, 167 { SAA7127_REG_TTX_ODD_REQ_VERT_START, 0x15 }, 168 { SAA7127_REG_TTX_ODD_REQ_VERT_END, 0x16 }, 169 { SAA7127_REG_TTX_EVEN_REQ_VERT_START, 0x15 }, 170 { SAA7127_REG_TTX_EVEN_REQ_VERT_END, 0x16 }, 171 { SAA7127_REG_FIRST_ACTIVE, 0x1a }, 172 { SAA7127_REG_LAST_ACTIVE, 0x01 }, 173 { SAA7127_REG_MSB_VERTICAL, 0xc0 }, 174 { SAA7127_REG_DISABLE_TTX_LINE_LO_0, 0x00 }, 175 { SAA7127_REG_DISABLE_TTX_LINE_LO_1, 0x00 }, 176 { 0, 0 } 177 }; 178 179 #define SAA7127_60HZ_DAC_CONTROL 0x15 180 static const struct i2c_reg_value saa7127_init_config_60hz[] = { 181 { SAA7127_REG_BURST_START, 0x19 }, 182 /* BURST_END is also used as a chip ID in saa7127_probe */ 183 { SAA7127_REG_BURST_END, 0x1d }, 184 { SAA7127_REG_CHROMA_PHASE, 0xa3 }, 185 { SAA7127_REG_GAINU, 0x98 }, 186 { SAA7127_REG_GAINV, 0xd3 }, 187 { SAA7127_REG_BLACK_LEVEL, 0x39 }, 188 { SAA7127_REG_BLANKING_LEVEL, 0x2e }, 189 { SAA7127_REG_VBI_BLANKING, 0x2e }, 190 { SAA7127_REG_DAC_CONTROL, 0x15 }, 191 { SAA7127_REG_BURST_AMP, 0x4d }, 192 { SAA7127_REG_SUBC3, 0x1f }, 193 { SAA7127_REG_SUBC2, 0x7c }, 194 { SAA7127_REG_SUBC1, 0xf0 }, 195 { SAA7127_REG_SUBC0, 0x21 }, 196 { SAA7127_REG_MULTI, 0x90 }, 197 { SAA7127_REG_CLOSED_CAPTION, 0x11 }, 198 { 0, 0 } 199 }; 200 201 #define SAA7127_50HZ_PAL_DAC_CONTROL 0x02 202 static struct i2c_reg_value saa7127_init_config_50hz_pal[] = { 203 { SAA7127_REG_BURST_START, 0x21 }, 204 /* BURST_END is also used as a chip ID in saa7127_probe */ 205 { SAA7127_REG_BURST_END, 0x1d }, 206 { SAA7127_REG_CHROMA_PHASE, 0x3f }, 207 { SAA7127_REG_GAINU, 0x7d }, 208 { SAA7127_REG_GAINV, 0xaf }, 209 { SAA7127_REG_BLACK_LEVEL, 0x33 }, 210 { SAA7127_REG_BLANKING_LEVEL, 0x35 }, 211 { SAA7127_REG_VBI_BLANKING, 0x35 }, 212 { SAA7127_REG_DAC_CONTROL, 0x02 }, 213 { SAA7127_REG_BURST_AMP, 0x2f }, 214 { SAA7127_REG_SUBC3, 0xcb }, 215 { SAA7127_REG_SUBC2, 0x8a }, 216 { SAA7127_REG_SUBC1, 0x09 }, 217 { SAA7127_REG_SUBC0, 0x2a }, 218 { SAA7127_REG_MULTI, 0xa0 }, 219 { SAA7127_REG_CLOSED_CAPTION, 0x00 }, 220 { 0, 0 } 221 }; 222 223 #define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08 224 static struct i2c_reg_value saa7127_init_config_50hz_secam[] = { 225 { SAA7127_REG_BURST_START, 0x21 }, 226 /* BURST_END is also used as a chip ID in saa7127_probe */ 227 { SAA7127_REG_BURST_END, 0x1d }, 228 { SAA7127_REG_CHROMA_PHASE, 0x3f }, 229 { SAA7127_REG_GAINU, 0x6a }, 230 { SAA7127_REG_GAINV, 0x81 }, 231 { SAA7127_REG_BLACK_LEVEL, 0x33 }, 232 { SAA7127_REG_BLANKING_LEVEL, 0x35 }, 233 { SAA7127_REG_VBI_BLANKING, 0x35 }, 234 { SAA7127_REG_DAC_CONTROL, 0x08 }, 235 { SAA7127_REG_BURST_AMP, 0x2f }, 236 { SAA7127_REG_SUBC3, 0xb2 }, 237 { SAA7127_REG_SUBC2, 0x3b }, 238 { SAA7127_REG_SUBC1, 0xa3 }, 239 { SAA7127_REG_SUBC0, 0x28 }, 240 { SAA7127_REG_MULTI, 0x90 }, 241 { SAA7127_REG_CLOSED_CAPTION, 0x00 }, 242 { 0, 0 } 243 }; 244 245 /* 246 ********************************************************************** 247 * 248 * Encoder Struct, holds the configuration state of the encoder 249 * 250 ********************************************************************** 251 */ 252 253 enum saa712x_model { 254 SAA7127, 255 SAA7129, 256 }; 257 258 struct saa7127_state { 259 struct v4l2_subdev sd; 260 v4l2_std_id std; 261 enum saa712x_model ident; 262 enum saa7127_input_type input_type; 263 enum saa7127_output_type output_type; 264 int video_enable; 265 int wss_enable; 266 u16 wss_mode; 267 int cc_enable; 268 u16 cc_data; 269 int xds_enable; 270 u16 xds_data; 271 int vps_enable; 272 u8 vps_data[5]; 273 u8 reg_2d; 274 u8 reg_3a; 275 u8 reg_3a_cb; /* colorbar bit */ 276 u8 reg_61; 277 }; 278 279 static inline struct saa7127_state *to_state(struct v4l2_subdev *sd) 280 { 281 return container_of(sd, struct saa7127_state, sd); 282 } 283 284 static const char * const output_strs[] = 285 { 286 "S-Video + Composite", 287 "Composite", 288 "S-Video", 289 "RGB", 290 "YUV C", 291 "YUV V" 292 }; 293 294 static const char * const wss_strs[] = { 295 "invalid", 296 "letterbox 14:9 center", 297 "letterbox 14:9 top", 298 "invalid", 299 "letterbox 16:9 top", 300 "invalid", 301 "invalid", 302 "16:9 full format anamorphic", 303 "4:3 full format", 304 "invalid", 305 "invalid", 306 "letterbox 16:9 center", 307 "invalid", 308 "letterbox >16:9 center", 309 "14:9 full format center", 310 "invalid", 311 }; 312 313 /* ----------------------------------------------------------------------- */ 314 315 static int saa7127_read(struct v4l2_subdev *sd, u8 reg) 316 { 317 struct i2c_client *client = v4l2_get_subdevdata(sd); 318 319 return i2c_smbus_read_byte_data(client, reg); 320 } 321 322 /* ----------------------------------------------------------------------- */ 323 324 static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val) 325 { 326 struct i2c_client *client = v4l2_get_subdevdata(sd); 327 int i; 328 329 for (i = 0; i < 3; i++) { 330 if (i2c_smbus_write_byte_data(client, reg, val) == 0) 331 return 0; 332 } 333 v4l2_err(sd, "I2C Write Problem\n"); 334 return -1; 335 } 336 337 /* ----------------------------------------------------------------------- */ 338 339 static int saa7127_write_inittab(struct v4l2_subdev *sd, 340 const struct i2c_reg_value *regs) 341 { 342 while (regs->reg != 0) { 343 saa7127_write(sd, regs->reg, regs->value); 344 regs++; 345 } 346 return 0; 347 } 348 349 /* ----------------------------------------------------------------------- */ 350 351 static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) 352 { 353 struct saa7127_state *state = to_state(sd); 354 int enable = (data->line != 0); 355 356 if (enable && (data->field != 0 || data->line != 16)) 357 return -EINVAL; 358 if (state->vps_enable != enable) { 359 v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off"); 360 saa7127_write(sd, 0x54, enable << 7); 361 state->vps_enable = enable; 362 } 363 if (!enable) 364 return 0; 365 366 state->vps_data[0] = data->data[2]; 367 state->vps_data[1] = data->data[8]; 368 state->vps_data[2] = data->data[9]; 369 state->vps_data[3] = data->data[10]; 370 state->vps_data[4] = data->data[11]; 371 v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data); 372 saa7127_write(sd, 0x55, state->vps_data[0]); 373 saa7127_write(sd, 0x56, state->vps_data[1]); 374 saa7127_write(sd, 0x57, state->vps_data[2]); 375 saa7127_write(sd, 0x58, state->vps_data[3]); 376 saa7127_write(sd, 0x59, state->vps_data[4]); 377 return 0; 378 } 379 380 /* ----------------------------------------------------------------------- */ 381 382 static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) 383 { 384 struct saa7127_state *state = to_state(sd); 385 u16 cc = data->data[1] << 8 | data->data[0]; 386 int enable = (data->line != 0); 387 388 if (enable && (data->field != 0 || data->line != 21)) 389 return -EINVAL; 390 if (state->cc_enable != enable) { 391 v4l2_dbg(1, debug, sd, 392 "Turn CC %s\n", enable ? "on" : "off"); 393 saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION, 394 (state->xds_enable << 7) | (enable << 6) | 0x11); 395 state->cc_enable = enable; 396 } 397 if (!enable) 398 return 0; 399 400 v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc); 401 saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff); 402 saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8); 403 state->cc_data = cc; 404 return 0; 405 } 406 407 /* ----------------------------------------------------------------------- */ 408 409 static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) 410 { 411 struct saa7127_state *state = to_state(sd); 412 u16 xds = data->data[1] << 8 | data->data[0]; 413 int enable = (data->line != 0); 414 415 if (enable && (data->field != 1 || data->line != 21)) 416 return -EINVAL; 417 if (state->xds_enable != enable) { 418 v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off"); 419 saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION, 420 (enable << 7) | (state->cc_enable << 6) | 0x11); 421 state->xds_enable = enable; 422 } 423 if (!enable) 424 return 0; 425 426 v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds); 427 saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff); 428 saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8); 429 state->xds_data = xds; 430 return 0; 431 } 432 433 /* ----------------------------------------------------------------------- */ 434 435 static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) 436 { 437 struct saa7127_state *state = to_state(sd); 438 int enable = (data->line != 0); 439 440 if (enable && (data->field != 0 || data->line != 23)) 441 return -EINVAL; 442 if (state->wss_enable != enable) { 443 v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off"); 444 saa7127_write(sd, 0x27, enable << 7); 445 state->wss_enable = enable; 446 } 447 if (!enable) 448 return 0; 449 450 saa7127_write(sd, 0x26, data->data[0]); 451 saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f)); 452 v4l2_dbg(1, debug, sd, 453 "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]); 454 state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0]; 455 return 0; 456 } 457 458 /* ----------------------------------------------------------------------- */ 459 460 static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable) 461 { 462 struct saa7127_state *state = to_state(sd); 463 464 if (enable) { 465 v4l2_dbg(1, debug, sd, "Enable Video Output\n"); 466 saa7127_write(sd, 0x2d, state->reg_2d); 467 saa7127_write(sd, 0x61, state->reg_61); 468 } else { 469 v4l2_dbg(1, debug, sd, "Disable Video Output\n"); 470 saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0)); 471 saa7127_write(sd, 0x61, (state->reg_61 | 0xc0)); 472 } 473 state->video_enable = enable; 474 return 0; 475 } 476 477 /* ----------------------------------------------------------------------- */ 478 479 static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std) 480 { 481 struct saa7127_state *state = to_state(sd); 482 const struct i2c_reg_value *inittab; 483 484 if (std & V4L2_STD_525_60) { 485 v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n"); 486 inittab = saa7127_init_config_60hz; 487 state->reg_61 = SAA7127_60HZ_DAC_CONTROL; 488 489 } else if (state->ident == SAA7129 && 490 (std & V4L2_STD_SECAM) && 491 !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) { 492 493 /* If and only if SECAM, with a SAA712[89] */ 494 v4l2_dbg(1, debug, sd, 495 "Selecting 50 Hz SECAM video Standard\n"); 496 inittab = saa7127_init_config_50hz_secam; 497 state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL; 498 499 } else { 500 v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n"); 501 inittab = saa7127_init_config_50hz_pal; 502 state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL; 503 } 504 505 /* Write Table */ 506 saa7127_write_inittab(sd, inittab); 507 state->std = std; 508 return 0; 509 } 510 511 /* ----------------------------------------------------------------------- */ 512 513 static int saa7127_set_output_type(struct v4l2_subdev *sd, int output) 514 { 515 struct saa7127_state *state = to_state(sd); 516 517 switch (output) { 518 case SAA7127_OUTPUT_TYPE_RGB: 519 state->reg_2d = 0x0f; /* RGB + CVBS (for sync) */ 520 state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ 521 break; 522 523 case SAA7127_OUTPUT_TYPE_COMPOSITE: 524 if (state->ident == SAA7129) 525 state->reg_2d = 0x20; /* CVBS only */ 526 else 527 state->reg_2d = 0x08; /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */ 528 state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ 529 break; 530 531 case SAA7127_OUTPUT_TYPE_SVIDEO: 532 if (state->ident == SAA7129) 533 state->reg_2d = 0x18; /* Y + C */ 534 else 535 state->reg_2d = 0xff; /*11111111 croma -> R, luma -> CVBS + G + B */ 536 state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ 537 break; 538 539 case SAA7127_OUTPUT_TYPE_YUV_V: 540 state->reg_2d = 0x4f; /* reg 2D = 01001111, all DAC's on, RGB + VBS */ 541 state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ 542 break; 543 544 case SAA7127_OUTPUT_TYPE_YUV_C: 545 state->reg_2d = 0x0f; /* reg 2D = 00001111, all DAC's on, RGB + CVBS */ 546 state->reg_3a = 0x0b; /* reg 3A = 00001011, bypass RGB-matrix */ 547 break; 548 549 case SAA7127_OUTPUT_TYPE_BOTH: 550 if (state->ident == SAA7129) 551 state->reg_2d = 0x38; 552 else 553 state->reg_2d = 0xbf; 554 state->reg_3a = 0x13; /* by default switch YUV to RGB-matrix on */ 555 break; 556 557 default: 558 return -EINVAL; 559 } 560 v4l2_dbg(1, debug, sd, 561 "Selecting %s output type\n", output_strs[output]); 562 563 /* Configure Encoder */ 564 saa7127_write(sd, 0x2d, state->reg_2d); 565 saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb); 566 state->output_type = output; 567 return 0; 568 } 569 570 /* ----------------------------------------------------------------------- */ 571 572 static int saa7127_set_input_type(struct v4l2_subdev *sd, int input) 573 { 574 struct saa7127_state *state = to_state(sd); 575 576 switch (input) { 577 case SAA7127_INPUT_TYPE_NORMAL: /* avia */ 578 v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n"); 579 state->reg_3a_cb = 0; 580 break; 581 582 case SAA7127_INPUT_TYPE_TEST_IMAGE: /* color bar */ 583 v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n"); 584 state->reg_3a_cb = 0x80; 585 break; 586 587 default: 588 return -EINVAL; 589 } 590 saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb); 591 state->input_type = input; 592 return 0; 593 } 594 595 /* ----------------------------------------------------------------------- */ 596 597 static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) 598 { 599 struct saa7127_state *state = to_state(sd); 600 601 if (state->std == std) 602 return 0; 603 return saa7127_set_std(sd, std); 604 } 605 606 static int saa7127_s_routing(struct v4l2_subdev *sd, 607 u32 input, u32 output, u32 config) 608 { 609 struct saa7127_state *state = to_state(sd); 610 int rc = 0; 611 612 if (state->input_type != input) 613 rc = saa7127_set_input_type(sd, input); 614 if (rc == 0 && state->output_type != output) 615 rc = saa7127_set_output_type(sd, output); 616 return rc; 617 } 618 619 static int saa7127_s_stream(struct v4l2_subdev *sd, int enable) 620 { 621 struct saa7127_state *state = to_state(sd); 622 623 if (state->video_enable == enable) 624 return 0; 625 return saa7127_set_video_enable(sd, enable); 626 } 627 628 static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) 629 { 630 struct saa7127_state *state = to_state(sd); 631 632 memset(fmt->service_lines, 0, sizeof(fmt->service_lines)); 633 if (state->vps_enable) 634 fmt->service_lines[0][16] = V4L2_SLICED_VPS; 635 if (state->wss_enable) 636 fmt->service_lines[0][23] = V4L2_SLICED_WSS_625; 637 if (state->cc_enable) { 638 fmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525; 639 fmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525; 640 } 641 fmt->service_set = 642 (state->vps_enable ? V4L2_SLICED_VPS : 0) | 643 (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) | 644 (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0); 645 return 0; 646 } 647 648 static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data) 649 { 650 switch (data->id) { 651 case V4L2_SLICED_WSS_625: 652 return saa7127_set_wss(sd, data); 653 case V4L2_SLICED_VPS: 654 return saa7127_set_vps(sd, data); 655 case V4L2_SLICED_CAPTION_525: 656 if (data->field == 0) 657 return saa7127_set_cc(sd, data); 658 return saa7127_set_xds(sd, data); 659 default: 660 return -EINVAL; 661 } 662 return 0; 663 } 664 665 #ifdef CONFIG_VIDEO_ADV_DEBUG 666 static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) 667 { 668 reg->val = saa7127_read(sd, reg->reg & 0xff); 669 reg->size = 1; 670 return 0; 671 } 672 673 static int saa7127_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) 674 { 675 saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff); 676 return 0; 677 } 678 #endif 679 680 static int saa7127_log_status(struct v4l2_subdev *sd) 681 { 682 struct saa7127_state *state = to_state(sd); 683 684 v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz"); 685 v4l2_info(sd, "Input: %s\n", state->input_type ? "color bars" : "normal"); 686 v4l2_info(sd, "Output: %s\n", state->video_enable ? 687 output_strs[state->output_type] : "disabled"); 688 v4l2_info(sd, "WSS: %s\n", state->wss_enable ? 689 wss_strs[state->wss_mode] : "disabled"); 690 v4l2_info(sd, "VPS: %s\n", state->vps_enable ? "enabled" : "disabled"); 691 v4l2_info(sd, "CC: %s\n", state->cc_enable ? "enabled" : "disabled"); 692 return 0; 693 } 694 695 /* ----------------------------------------------------------------------- */ 696 697 static const struct v4l2_subdev_core_ops saa7127_core_ops = { 698 .log_status = saa7127_log_status, 699 #ifdef CONFIG_VIDEO_ADV_DEBUG 700 .g_register = saa7127_g_register, 701 .s_register = saa7127_s_register, 702 #endif 703 }; 704 705 static const struct v4l2_subdev_video_ops saa7127_video_ops = { 706 .s_std_output = saa7127_s_std_output, 707 .s_routing = saa7127_s_routing, 708 .s_stream = saa7127_s_stream, 709 }; 710 711 static const struct v4l2_subdev_vbi_ops saa7127_vbi_ops = { 712 .s_vbi_data = saa7127_s_vbi_data, 713 .g_sliced_fmt = saa7127_g_sliced_fmt, 714 }; 715 716 static const struct v4l2_subdev_ops saa7127_ops = { 717 .core = &saa7127_core_ops, 718 .video = &saa7127_video_ops, 719 .vbi = &saa7127_vbi_ops, 720 }; 721 722 /* ----------------------------------------------------------------------- */ 723 724 static int saa7127_probe(struct i2c_client *client, 725 const struct i2c_device_id *id) 726 { 727 struct saa7127_state *state; 728 struct v4l2_subdev *sd; 729 struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 }; /* set to disabled */ 730 731 /* Check if the adapter supports the needed features */ 732 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 733 return -EIO; 734 735 v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n", 736 client->addr << 1); 737 738 state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); 739 if (state == NULL) 740 return -ENOMEM; 741 742 sd = &state->sd; 743 v4l2_i2c_subdev_init(sd, client, &saa7127_ops); 744 745 /* First test register 0: Bits 5-7 are a version ID (should be 0), 746 and bit 2 should also be 0. 747 This is rather general, so the second test is more specific and 748 looks at the 'ending point of burst in clock cycles' which is 749 0x1d after a reset and not expected to ever change. */ 750 if ((saa7127_read(sd, 0) & 0xe4) != 0 || 751 (saa7127_read(sd, 0x29) & 0x3f) != 0x1d) { 752 v4l2_dbg(1, debug, sd, "saa7127 not found\n"); 753 return -ENODEV; 754 } 755 756 if (id->driver_data) { /* Chip type is already known */ 757 state->ident = id->driver_data; 758 } else { /* Needs detection */ 759 int read_result; 760 761 /* Detect if it's an saa7129 */ 762 read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2); 763 saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa); 764 if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) { 765 saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 766 read_result); 767 state->ident = SAA7129; 768 strlcpy(client->name, "saa7129", I2C_NAME_SIZE); 769 } else { 770 state->ident = SAA7127; 771 strlcpy(client->name, "saa7127", I2C_NAME_SIZE); 772 } 773 } 774 775 v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name, 776 client->addr << 1, client->adapter->name); 777 778 v4l2_dbg(1, debug, sd, "Configuring encoder\n"); 779 saa7127_write_inittab(sd, saa7127_init_config_common); 780 saa7127_set_std(sd, V4L2_STD_NTSC); 781 saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH); 782 saa7127_set_vps(sd, &vbi); 783 saa7127_set_wss(sd, &vbi); 784 saa7127_set_cc(sd, &vbi); 785 saa7127_set_xds(sd, &vbi); 786 if (test_image == 1) 787 /* The Encoder has an internal Colorbar generator */ 788 /* This can be used for debugging */ 789 saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE); 790 else 791 saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL); 792 saa7127_set_video_enable(sd, 1); 793 794 if (state->ident == SAA7129) 795 saa7127_write_inittab(sd, saa7129_init_config_extra); 796 return 0; 797 } 798 799 /* ----------------------------------------------------------------------- */ 800 801 static int saa7127_remove(struct i2c_client *client) 802 { 803 struct v4l2_subdev *sd = i2c_get_clientdata(client); 804 805 v4l2_device_unregister_subdev(sd); 806 /* Turn off TV output */ 807 saa7127_set_video_enable(sd, 0); 808 return 0; 809 } 810 811 /* ----------------------------------------------------------------------- */ 812 813 static struct i2c_device_id saa7127_id[] = { 814 { "saa7127_auto", 0 }, /* auto-detection */ 815 { "saa7126", SAA7127 }, 816 { "saa7127", SAA7127 }, 817 { "saa7128", SAA7129 }, 818 { "saa7129", SAA7129 }, 819 { } 820 }; 821 MODULE_DEVICE_TABLE(i2c, saa7127_id); 822 823 static struct i2c_driver saa7127_driver = { 824 .driver = { 825 .name = "saa7127", 826 }, 827 .probe = saa7127_probe, 828 .remove = saa7127_remove, 829 .id_table = saa7127_id, 830 }; 831 832 module_i2c_driver(saa7127_driver); 833