1 /* saa711x - Philips SAA711x video decoder driver 2 * This driver can work with saa7111, saa7111a, saa7113, saa7114, 3 * saa7115 and saa7118. 4 * 5 * Based on saa7114 driver by Maxim Yevtyushkin, which is based on 6 * the saa7111 driver by Dave Perks. 7 * 8 * Copyright (C) 1998 Dave Perks <dperks@ibm.net> 9 * Copyright (C) 2002 Maxim Yevtyushkin <max@linuxmedialabs.com> 10 * 11 * Slight changes for video timing and attachment output by 12 * Wolfgang Scherr <scherr@net4you.net> 13 * 14 * Moved over to the linux >= 2.4.x i2c protocol (1/1/2003) 15 * by Ronald Bultje <rbultje@ronald.bitfreak.net> 16 * 17 * Added saa7115 support by Kevin Thayer <nufan_wfk at yahoo.com> 18 * (2/17/2003) 19 * 20 * VBI support (2004) and cleanups (2005) by Hans Verkuil <hverkuil@xs4all.nl> 21 * 22 * Copyright (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> 23 * SAA7111, SAA7113 and SAA7118 support 24 * 25 * This program is free software; you can redistribute it and/or 26 * modify it under the terms of the GNU General Public License 27 * as published by the Free Software Foundation; either version 2 28 * of the License, or (at your option) any later version. 29 * 30 * This program is distributed in the hope that it will be useful, 31 * but WITHOUT ANY WARRANTY; without even the implied warranty of 32 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 33 * GNU General Public License for more details. 34 * 35 * You should have received a copy of the GNU General Public License 36 * along with this program; if not, write to the Free Software 37 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. 38 */ 39 40 #include "saa711x_regs.h" 41 42 #include <linux/kernel.h> 43 #include <linux/module.h> 44 #include <linux/slab.h> 45 #include <linux/i2c.h> 46 #include <linux/videodev2.h> 47 #include <media/v4l2-device.h> 48 #include <media/v4l2-ctrls.h> 49 #include <media/v4l2-mc.h> 50 #include <media/i2c/saa7115.h> 51 #include <asm/div64.h> 52 53 #define VRES_60HZ (480+16) 54 55 MODULE_DESCRIPTION("Philips SAA7111/SAA7113/SAA7114/SAA7115/SAA7118 video decoder driver"); 56 MODULE_AUTHOR( "Maxim Yevtyushkin, Kevin Thayer, Chris Kennedy, " 57 "Hans Verkuil, Mauro Carvalho Chehab"); 58 MODULE_LICENSE("GPL"); 59 60 static bool debug; 61 module_param(debug, bool, 0644); 62 63 MODULE_PARM_DESC(debug, "Debug level (0-1)"); 64 65 66 enum saa711x_model { 67 SAA7111A, 68 SAA7111, 69 SAA7113, 70 GM7113C, 71 SAA7114, 72 SAA7115, 73 SAA7118, 74 }; 75 76 struct saa711x_state { 77 struct v4l2_subdev sd; 78 #ifdef CONFIG_MEDIA_CONTROLLER 79 struct media_pad pads[DEMOD_NUM_PADS]; 80 #endif 81 struct v4l2_ctrl_handler hdl; 82 83 struct { 84 /* chroma gain control cluster */ 85 struct v4l2_ctrl *agc; 86 struct v4l2_ctrl *gain; 87 }; 88 89 v4l2_std_id std; 90 int input; 91 int output; 92 int enable; 93 int radio; 94 int width; 95 int height; 96 enum saa711x_model ident; 97 u32 audclk_freq; 98 u32 crystal_freq; 99 bool ucgc; 100 u8 cgcdiv; 101 bool apll; 102 bool double_asclk; 103 }; 104 105 static inline struct saa711x_state *to_state(struct v4l2_subdev *sd) 106 { 107 return container_of(sd, struct saa711x_state, sd); 108 } 109 110 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) 111 { 112 return &container_of(ctrl->handler, struct saa711x_state, hdl)->sd; 113 } 114 115 /* ----------------------------------------------------------------------- */ 116 117 static inline int saa711x_write(struct v4l2_subdev *sd, u8 reg, u8 value) 118 { 119 struct i2c_client *client = v4l2_get_subdevdata(sd); 120 121 return i2c_smbus_write_byte_data(client, reg, value); 122 } 123 124 /* Sanity routine to check if a register is present */ 125 static int saa711x_has_reg(const int id, const u8 reg) 126 { 127 if (id == SAA7111) 128 return reg < 0x20 && reg != 0x01 && reg != 0x0f && 129 (reg < 0x13 || reg > 0x19) && reg != 0x1d && reg != 0x1e; 130 if (id == SAA7111A) 131 return reg < 0x20 && reg != 0x01 && reg != 0x0f && 132 reg != 0x14 && reg != 0x18 && reg != 0x19 && 133 reg != 0x1d && reg != 0x1e; 134 135 /* common for saa7113/4/5/8 */ 136 if (unlikely((reg >= 0x3b && reg <= 0x3f) || reg == 0x5c || reg == 0x5f || 137 reg == 0xa3 || reg == 0xa7 || reg == 0xab || reg == 0xaf || (reg >= 0xb5 && reg <= 0xb7) || 138 reg == 0xd3 || reg == 0xd7 || reg == 0xdb || reg == 0xdf || (reg >= 0xe5 && reg <= 0xe7) || 139 reg == 0x82 || (reg >= 0x89 && reg <= 0x8e))) 140 return 0; 141 142 switch (id) { 143 case GM7113C: 144 return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && reg < 0x20; 145 case SAA7113: 146 return reg != 0x14 && (reg < 0x18 || reg > 0x1e) && (reg < 0x20 || reg > 0x3f) && 147 reg != 0x5d && reg < 0x63; 148 case SAA7114: 149 return (reg < 0x1a || reg > 0x1e) && (reg < 0x20 || reg > 0x2f) && 150 (reg < 0x63 || reg > 0x7f) && reg != 0x33 && reg != 0x37 && 151 reg != 0x81 && reg < 0xf0; 152 case SAA7115: 153 return (reg < 0x20 || reg > 0x2f) && reg != 0x65 && (reg < 0xfc || reg > 0xfe); 154 case SAA7118: 155 return (reg < 0x1a || reg > 0x1d) && (reg < 0x20 || reg > 0x22) && 156 (reg < 0x26 || reg > 0x28) && reg != 0x33 && reg != 0x37 && 157 (reg < 0x63 || reg > 0x7f) && reg != 0x81 && reg < 0xf0; 158 } 159 return 1; 160 } 161 162 static int saa711x_writeregs(struct v4l2_subdev *sd, const unsigned char *regs) 163 { 164 struct saa711x_state *state = to_state(sd); 165 unsigned char reg, data; 166 167 while (*regs != 0x00) { 168 reg = *(regs++); 169 data = *(regs++); 170 171 /* According with datasheets, reserved regs should be 172 filled with 0 - seems better not to touch on they */ 173 if (saa711x_has_reg(state->ident, reg)) { 174 if (saa711x_write(sd, reg, data) < 0) 175 return -1; 176 } else { 177 v4l2_dbg(1, debug, sd, "tried to access reserved reg 0x%02x\n", reg); 178 } 179 } 180 return 0; 181 } 182 183 static inline int saa711x_read(struct v4l2_subdev *sd, u8 reg) 184 { 185 struct i2c_client *client = v4l2_get_subdevdata(sd); 186 187 return i2c_smbus_read_byte_data(client, reg); 188 } 189 190 /* ----------------------------------------------------------------------- */ 191 192 /* SAA7111 initialization table */ 193 static const unsigned char saa7111_init[] = { 194 R_01_INC_DELAY, 0x00, /* reserved */ 195 196 /*front end */ 197 R_02_INPUT_CNTL_1, 0xd0, /* FUSE=3, GUDL=2, MODE=0 */ 198 R_03_INPUT_CNTL_2, 0x23, /* HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, 199 * GAFIX=0, GAI1=256, GAI2=256 */ 200 R_04_INPUT_CNTL_3, 0x00, /* GAI1=256 */ 201 R_05_INPUT_CNTL_4, 0x00, /* GAI2=256 */ 202 203 /* decoder */ 204 R_06_H_SYNC_START, 0xf3, /* HSB at 13(50Hz) / 17(60Hz) 205 * pixels after end of last line */ 206 R_07_H_SYNC_STOP, 0xe8, /* HSS seems to be needed to 207 * work with NTSC, too */ 208 R_08_SYNC_CNTL, 0xc8, /* AUFD=1, FSEL=1, EXFIL=0, 209 * VTRC=1, HPLL=0, VNOI=0 */ 210 R_09_LUMA_CNTL, 0x01, /* BYPS=0, PREF=0, BPSS=0, 211 * VBLB=0, UPTCV=0, APER=1 */ 212 R_0A_LUMA_BRIGHT_CNTL, 0x80, 213 R_0B_LUMA_CONTRAST_CNTL, 0x47, /* 0b - CONT=1.109 */ 214 R_0C_CHROMA_SAT_CNTL, 0x40, 215 R_0D_CHROMA_HUE_CNTL, 0x00, 216 R_0E_CHROMA_CNTL_1, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, 217 * FCTC=0, CHBW=1 */ 218 R_0F_CHROMA_GAIN_CNTL, 0x00, /* reserved */ 219 R_10_CHROMA_CNTL_2, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */ 220 R_11_MODE_DELAY_CNTL, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, 221 * OEYC=1, OEHV=1, VIPB=0, COLO=0 */ 222 R_12_RT_SIGNAL_CNTL, 0x00, /* 12 - output control 2 */ 223 R_13_RT_X_PORT_OUT_CNTL, 0x00, /* 13 - output control 3 */ 224 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 225 R_15_VGATE_START_FID_CHG, 0x00, 226 R_16_VGATE_STOP, 0x00, 227 R_17_MISC_VGATE_CONF_AND_MSB, 0x00, 228 229 0x00, 0x00 230 }; 231 232 /* 233 * This table has one illegal value, and some values that are not 234 * correct according to the datasheet initialization table. 235 * 236 * If you need a table with legal/default values tell the driver in 237 * i2c_board_info.platform_data, and you will get the gm7113c_init 238 * table instead. 239 */ 240 241 /* SAA7113 Init codes */ 242 static const unsigned char saa7113_init[] = { 243 R_01_INC_DELAY, 0x08, 244 R_02_INPUT_CNTL_1, 0xc2, 245 R_03_INPUT_CNTL_2, 0x30, 246 R_04_INPUT_CNTL_3, 0x00, 247 R_05_INPUT_CNTL_4, 0x00, 248 R_06_H_SYNC_START, 0x89, /* Illegal value -119, 249 * min. value = -108 (0x94) */ 250 R_07_H_SYNC_STOP, 0x0d, 251 R_08_SYNC_CNTL, 0x88, /* Not datasheet default. 252 * HTC = VTR mode, should be 0x98 */ 253 R_09_LUMA_CNTL, 0x01, 254 R_0A_LUMA_BRIGHT_CNTL, 0x80, 255 R_0B_LUMA_CONTRAST_CNTL, 0x47, 256 R_0C_CHROMA_SAT_CNTL, 0x40, 257 R_0D_CHROMA_HUE_CNTL, 0x00, 258 R_0E_CHROMA_CNTL_1, 0x01, 259 R_0F_CHROMA_GAIN_CNTL, 0x2a, 260 R_10_CHROMA_CNTL_2, 0x08, /* Not datsheet default. 261 * VRLN enabled, should be 0x00 */ 262 R_11_MODE_DELAY_CNTL, 0x0c, 263 R_12_RT_SIGNAL_CNTL, 0x07, /* Not datasheet default, 264 * should be 0x01 */ 265 R_13_RT_X_PORT_OUT_CNTL, 0x00, 266 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 267 R_15_VGATE_START_FID_CHG, 0x00, 268 R_16_VGATE_STOP, 0x00, 269 R_17_MISC_VGATE_CONF_AND_MSB, 0x00, 270 271 0x00, 0x00 272 }; 273 274 /* 275 * GM7113C is a clone of the SAA7113 chip 276 * This init table is copied out of the saa7113 datasheet. 277 * In R_08 we enable "Automatic Field Detection" [AUFD], 278 * this is disabled when saa711x_set_v4lstd is called. 279 */ 280 static const unsigned char gm7113c_init[] = { 281 R_01_INC_DELAY, 0x08, 282 R_02_INPUT_CNTL_1, 0xc0, 283 R_03_INPUT_CNTL_2, 0x33, 284 R_04_INPUT_CNTL_3, 0x00, 285 R_05_INPUT_CNTL_4, 0x00, 286 R_06_H_SYNC_START, 0xe9, 287 R_07_H_SYNC_STOP, 0x0d, 288 R_08_SYNC_CNTL, 0x98, 289 R_09_LUMA_CNTL, 0x01, 290 R_0A_LUMA_BRIGHT_CNTL, 0x80, 291 R_0B_LUMA_CONTRAST_CNTL, 0x47, 292 R_0C_CHROMA_SAT_CNTL, 0x40, 293 R_0D_CHROMA_HUE_CNTL, 0x00, 294 R_0E_CHROMA_CNTL_1, 0x01, 295 R_0F_CHROMA_GAIN_CNTL, 0x2a, 296 R_10_CHROMA_CNTL_2, 0x00, 297 R_11_MODE_DELAY_CNTL, 0x0c, 298 R_12_RT_SIGNAL_CNTL, 0x01, 299 R_13_RT_X_PORT_OUT_CNTL, 0x00, 300 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 301 R_15_VGATE_START_FID_CHG, 0x00, 302 R_16_VGATE_STOP, 0x00, 303 R_17_MISC_VGATE_CONF_AND_MSB, 0x00, 304 305 0x00, 0x00 306 }; 307 308 /* If a value differs from the Hauppauge driver values, then the comment starts with 309 'was 0xXX' to denote the Hauppauge value. Otherwise the value is identical to what the 310 Hauppauge driver sets. */ 311 312 /* SAA7114 and SAA7115 initialization table */ 313 static const unsigned char saa7115_init_auto_input[] = { 314 /* Front-End Part */ 315 R_01_INC_DELAY, 0x48, /* white peak control disabled */ 316 R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */ 317 R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */ 318 R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */ 319 /* Decoder Part */ 320 R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */ 321 R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */ 322 R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */ 323 R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */ 324 R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */ 325 R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */ 326 R_0D_CHROMA_HUE_CNTL, 0x00, 327 R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */ 328 R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */ 329 R_11_MODE_DELAY_CNTL, 0x00, 330 R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */ 331 R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */ 332 R_14_ANAL_ADC_COMPAT_CNTL, 0x00, 333 R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */ 334 R_19_RAW_DATA_OFF_CNTL, 0x80, 335 R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */ 336 R_1B_MISC_TVVCRDET, 0x42, /* recommended value */ 337 R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */ 338 R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */ 339 340 341 R_80_GLOBAL_CNTL_1, 0x0, /* No tasks enabled at init */ 342 343 /* Power Device Control */ 344 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */ 345 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */ 346 0x00, 0x00 347 }; 348 349 /* Used to reset saa7113, saa7114 and saa7115 */ 350 static const unsigned char saa7115_cfg_reset_scaler[] = { 351 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */ 352 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 353 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ 354 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */ 355 0x00, 0x00 356 }; 357 358 /* ============== SAA7715 VIDEO templates ============= */ 359 360 static const unsigned char saa7115_cfg_60hz_video[] = { 361 R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ 362 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 363 364 R_15_VGATE_START_FID_CHG, 0x03, 365 R_16_VGATE_STOP, 0x11, 366 R_17_MISC_VGATE_CONF_AND_MSB, 0x9c, 367 368 R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */ 369 R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */ 370 371 R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */ 372 373 /* Task A */ 374 R_90_A_TASK_HANDLING_CNTL, 0x80, 375 R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, 376 R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, 377 R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, 378 379 /* hoffset low (input), 0x0002 is minimum */ 380 R_94_A_HORIZ_INPUT_WINDOW_START, 0x01, 381 R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 382 383 /* hsize low (input), 0x02d0 = 720 */ 384 R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 385 R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 386 387 R_98_A_VERT_INPUT_WINDOW_START, 0x05, 388 R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, 389 390 R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c, 391 R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, 392 393 R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, 394 R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, 395 396 R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c, 397 R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, 398 399 /* Task B */ 400 R_C0_B_TASK_HANDLING_CNTL, 0x00, 401 R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, 402 R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, 403 R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, 404 405 /* 0x0002 is minimum */ 406 R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02, 407 R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 408 409 /* 0x02d0 = 720 */ 410 R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 411 R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 412 413 /* vwindow start 0x12 = 18 */ 414 R_C8_B_VERT_INPUT_WINDOW_START, 0x12, 415 R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, 416 417 /* vwindow length 0xf8 = 248 */ 418 R_CA_B_VERT_INPUT_WINDOW_LENGTH, VRES_60HZ>>1, 419 R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, VRES_60HZ>>9, 420 421 /* hwindow 0x02d0 = 720 */ 422 R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, 423 R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, 424 425 R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */ 426 R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */ 427 R_F5_PULSGEN_LINE_LENGTH, 0xad, 428 R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, 429 430 0x00, 0x00 431 }; 432 433 static const unsigned char saa7115_cfg_50hz_video[] = { 434 R_80_GLOBAL_CNTL_1, 0x00, 435 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 436 437 R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */ 438 R_16_VGATE_STOP, 0x16, 439 R_17_MISC_VGATE_CONF_AND_MSB, 0x99, 440 441 R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */ 442 R_0E_CHROMA_CNTL_1, 0x07, 443 444 R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */ 445 446 /* Task A */ 447 R_90_A_TASK_HANDLING_CNTL, 0x81, 448 R_91_A_X_PORT_FORMATS_AND_CONF, 0x48, 449 R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40, 450 R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84, 451 452 /* This is weird: the datasheet says that you should use 2 as the minimum value, */ 453 /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ 454 /* hoffset low (input), 0x0002 is minimum */ 455 R_94_A_HORIZ_INPUT_WINDOW_START, 0x00, 456 R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 457 458 /* hsize low (input), 0x02d0 = 720 */ 459 R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 460 R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 461 462 R_98_A_VERT_INPUT_WINDOW_START, 0x03, 463 R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00, 464 465 /* vsize 0x12 = 18 */ 466 R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12, 467 R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00, 468 469 /* hsize 0x05a0 = 1440 */ 470 R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0, 471 R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */ 472 R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */ 473 R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */ 474 475 /* Task B */ 476 R_C0_B_TASK_HANDLING_CNTL, 0x00, 477 R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08, 478 R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00, 479 R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80, 480 481 /* This is weird: the datasheet says that you should use 2 as the minimum value, */ 482 /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */ 483 /* hoffset low (input), 0x0002 is minimum. See comment above. */ 484 R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00, 485 R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00, 486 487 /* hsize 0x02d0 = 720 */ 488 R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0, 489 R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02, 490 491 /* voffset 0x16 = 22 */ 492 R_C8_B_VERT_INPUT_WINDOW_START, 0x16, 493 R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00, 494 495 /* vsize 0x0120 = 288 */ 496 R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20, 497 R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01, 498 499 /* hsize 0x02d0 = 720 */ 500 R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0, 501 R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02, 502 503 R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */ 504 R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */ 505 R_F5_PULSGEN_LINE_LENGTH, 0xb0, 506 R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01, 507 508 0x00, 0x00 509 }; 510 511 /* ============== SAA7715 VIDEO templates (end) ======= */ 512 513 static const unsigned char saa7115_cfg_vbi_on[] = { 514 R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ 515 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 516 R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */ 517 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ 518 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ 519 520 0x00, 0x00 521 }; 522 523 static const unsigned char saa7115_cfg_vbi_off[] = { 524 R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */ 525 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */ 526 R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */ 527 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */ 528 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */ 529 530 0x00, 0x00 531 }; 532 533 534 static const unsigned char saa7115_init_misc[] = { 535 R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01, 536 R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01, 537 R_84_I_PORT_SIGNAL_DEF, 0x20, 538 R_85_I_PORT_SIGNAL_POLAR, 0x21, 539 R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5, 540 R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, 541 542 /* Task A */ 543 R_A0_A_HORIZ_PRESCALING, 0x01, 544 R_A1_A_ACCUMULATION_LENGTH, 0x00, 545 R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, 546 547 /* Configure controls at nominal value*/ 548 R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80, 549 R_A5_A_LUMA_CONTRAST_CNTL, 0x40, 550 R_A6_A_CHROMA_SATURATION_CNTL, 0x40, 551 552 /* note: 2 x zoom ensures that VBI lines have same length as video lines. */ 553 R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00, 554 R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02, 555 556 R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00, 557 558 /* must be horiz lum scaling / 2 */ 559 R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00, 560 R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01, 561 562 /* must be offset luma / 2 */ 563 R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00, 564 565 R_B0_A_VERT_LUMA_SCALING_INC, 0x00, 566 R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04, 567 568 R_B2_A_VERT_CHROMA_SCALING_INC, 0x00, 569 R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04, 570 571 R_B4_A_VERT_SCALING_MODE_CNTL, 0x01, 572 573 R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00, 574 R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00, 575 R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00, 576 R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00, 577 578 R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00, 579 R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00, 580 R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00, 581 R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00, 582 583 /* Task B */ 584 R_D0_B_HORIZ_PRESCALING, 0x01, 585 R_D1_B_ACCUMULATION_LENGTH, 0x00, 586 R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00, 587 588 /* Configure controls at nominal value*/ 589 R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80, 590 R_D5_B_LUMA_CONTRAST_CNTL, 0x40, 591 R_D6_B_CHROMA_SATURATION_CNTL, 0x40, 592 593 /* hor lum scaling 0x0400 = 1 */ 594 R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, 595 R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04, 596 597 R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00, 598 599 /* must be hor lum scaling / 2 */ 600 R_DC_B_HORIZ_CHROMA_SCALING, 0x00, 601 R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02, 602 603 /* must be offset luma / 2 */ 604 R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00, 605 606 R_E0_B_VERT_LUMA_SCALING_INC, 0x00, 607 R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04, 608 609 R_E2_B_VERT_CHROMA_SCALING_INC, 0x00, 610 R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04, 611 612 R_E4_B_VERT_SCALING_MODE_CNTL, 0x01, 613 614 R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00, 615 R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00, 616 R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00, 617 R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00, 618 619 R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00, 620 R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00, 621 R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00, 622 R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00, 623 624 R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */ 625 R_F3_PLL_INCREMENT, 0x46, 626 R_F4_PLL2_STATUS, 0x00, 627 R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */ 628 R_F8_PULSE_B_POS, 0x00, 629 R_F9_PULSE_B_POS_MSB, 0x4b, 630 R_FA_PULSE_C_POS, 0x00, 631 R_FB_PULSE_C_POS_MSB, 0x4b, 632 633 /* PLL2 lock detection settings: 71 lines 50% phase error */ 634 R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88, 635 636 /* Turn off VBI */ 637 R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */ 638 R_41_LCR_BASE, 0xff, 639 R_41_LCR_BASE+1, 0xff, 640 R_41_LCR_BASE+2, 0xff, 641 R_41_LCR_BASE+3, 0xff, 642 R_41_LCR_BASE+4, 0xff, 643 R_41_LCR_BASE+5, 0xff, 644 R_41_LCR_BASE+6, 0xff, 645 R_41_LCR_BASE+7, 0xff, 646 R_41_LCR_BASE+8, 0xff, 647 R_41_LCR_BASE+9, 0xff, 648 R_41_LCR_BASE+10, 0xff, 649 R_41_LCR_BASE+11, 0xff, 650 R_41_LCR_BASE+12, 0xff, 651 R_41_LCR_BASE+13, 0xff, 652 R_41_LCR_BASE+14, 0xff, 653 R_41_LCR_BASE+15, 0xff, 654 R_41_LCR_BASE+16, 0xff, 655 R_41_LCR_BASE+17, 0xff, 656 R_41_LCR_BASE+18, 0xff, 657 R_41_LCR_BASE+19, 0xff, 658 R_41_LCR_BASE+20, 0xff, 659 R_41_LCR_BASE+21, 0xff, 660 R_41_LCR_BASE+22, 0xff, 661 R_58_PROGRAM_FRAMING_CODE, 0x40, 662 R_59_H_OFF_FOR_SLICER, 0x47, 663 R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83, 664 R_5D_DID, 0xbd, 665 R_5E_SDID, 0x35, 666 667 R_02_INPUT_CNTL_1, 0xc4, /* input tuner -> input 4, amplifier active */ 668 669 R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */ 670 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, 671 R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, 672 0x00, 0x00 673 }; 674 675 static int saa711x_odd_parity(u8 c) 676 { 677 c ^= (c >> 4); 678 c ^= (c >> 2); 679 c ^= (c >> 1); 680 681 return c & 1; 682 } 683 684 static int saa711x_decode_vps(u8 *dst, u8 *p) 685 { 686 static const u8 biphase_tbl[] = { 687 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 688 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 689 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, 690 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, 691 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, 692 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, 693 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 694 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 695 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, 696 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, 697 0xc3, 0x4b, 0x43, 0xc3, 0x87, 0x0f, 0x07, 0x87, 698 0x83, 0x0b, 0x03, 0x83, 0xc3, 0x4b, 0x43, 0xc3, 699 0xc1, 0x49, 0x41, 0xc1, 0x85, 0x0d, 0x05, 0x85, 700 0x81, 0x09, 0x01, 0x81, 0xc1, 0x49, 0x41, 0xc1, 701 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, 702 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, 703 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, 704 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, 705 0xc2, 0x4a, 0x42, 0xc2, 0x86, 0x0e, 0x06, 0x86, 706 0x82, 0x0a, 0x02, 0x82, 0xc2, 0x4a, 0x42, 0xc2, 707 0xc0, 0x48, 0x40, 0xc0, 0x84, 0x0c, 0x04, 0x84, 708 0x80, 0x08, 0x00, 0x80, 0xc0, 0x48, 0x40, 0xc0, 709 0xe0, 0x68, 0x60, 0xe0, 0xa4, 0x2c, 0x24, 0xa4, 710 0xa0, 0x28, 0x20, 0xa0, 0xe0, 0x68, 0x60, 0xe0, 711 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 712 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 713 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, 714 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, 715 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, 716 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, 717 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, 718 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, 719 }; 720 int i; 721 u8 c, err = 0; 722 723 for (i = 0; i < 2 * 13; i += 2) { 724 err |= biphase_tbl[p[i]] | biphase_tbl[p[i + 1]]; 725 c = (biphase_tbl[p[i + 1]] & 0xf) | ((biphase_tbl[p[i]] & 0xf) << 4); 726 dst[i / 2] = c; 727 } 728 return err & 0xf0; 729 } 730 731 static int saa711x_decode_wss(u8 *p) 732 { 733 static const int wss_bits[8] = { 734 0, 0, 0, 1, 0, 1, 1, 1 735 }; 736 unsigned char parity; 737 int wss = 0; 738 int i; 739 740 for (i = 0; i < 16; i++) { 741 int b1 = wss_bits[p[i] & 7]; 742 int b2 = wss_bits[(p[i] >> 3) & 7]; 743 744 if (b1 == b2) 745 return -1; 746 wss |= b2 << i; 747 } 748 parity = wss & 15; 749 parity ^= parity >> 2; 750 parity ^= parity >> 1; 751 752 if (!(parity & 1)) 753 return -1; 754 755 return wss; 756 } 757 758 static int saa711x_s_clock_freq(struct v4l2_subdev *sd, u32 freq) 759 { 760 struct saa711x_state *state = to_state(sd); 761 u32 acpf; 762 u32 acni; 763 u32 hz; 764 u64 f; 765 u8 acc = 0; /* reg 0x3a, audio clock control */ 766 767 /* Checks for chips that don't have audio clock (saa7111, saa7113) */ 768 if (!saa711x_has_reg(state->ident, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD)) 769 return 0; 770 771 v4l2_dbg(1, debug, sd, "set audio clock freq: %d\n", freq); 772 773 /* sanity check */ 774 if (freq < 32000 || freq > 48000) 775 return -EINVAL; 776 777 /* hz is the refresh rate times 100 */ 778 hz = (state->std & V4L2_STD_525_60) ? 5994 : 5000; 779 /* acpf = (256 * freq) / field_frequency == (256 * 100 * freq) / hz */ 780 acpf = (25600 * freq) / hz; 781 /* acni = (256 * freq * 2^23) / crystal_frequency = 782 (freq * 2^(8+23)) / crystal_frequency = 783 (freq << 31) / crystal_frequency */ 784 f = freq; 785 f = f << 31; 786 do_div(f, state->crystal_freq); 787 acni = f; 788 if (state->ucgc) { 789 acpf = acpf * state->cgcdiv / 16; 790 acni = acni * state->cgcdiv / 16; 791 acc = 0x80; 792 if (state->cgcdiv == 3) 793 acc |= 0x40; 794 } 795 if (state->apll) 796 acc |= 0x08; 797 798 if (state->double_asclk) { 799 acpf <<= 1; 800 acni <<= 1; 801 } 802 saa711x_write(sd, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03); 803 saa711x_write(sd, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10 << state->double_asclk); 804 saa711x_write(sd, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc); 805 806 saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff); 807 saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1, 808 (acpf >> 8) & 0xff); 809 saa711x_write(sd, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2, 810 (acpf >> 16) & 0x03); 811 812 saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff); 813 saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff); 814 saa711x_write(sd, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f); 815 state->audclk_freq = freq; 816 return 0; 817 } 818 819 static int saa711x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 820 { 821 struct v4l2_subdev *sd = to_sd(ctrl); 822 struct saa711x_state *state = to_state(sd); 823 824 switch (ctrl->id) { 825 case V4L2_CID_CHROMA_AGC: 826 /* chroma gain cluster */ 827 if (state->agc->val) 828 state->gain->val = 829 saa711x_read(sd, R_0F_CHROMA_GAIN_CNTL) & 0x7f; 830 break; 831 } 832 return 0; 833 } 834 835 static int saa711x_s_ctrl(struct v4l2_ctrl *ctrl) 836 { 837 struct v4l2_subdev *sd = to_sd(ctrl); 838 struct saa711x_state *state = to_state(sd); 839 840 switch (ctrl->id) { 841 case V4L2_CID_BRIGHTNESS: 842 saa711x_write(sd, R_0A_LUMA_BRIGHT_CNTL, ctrl->val); 843 break; 844 845 case V4L2_CID_CONTRAST: 846 saa711x_write(sd, R_0B_LUMA_CONTRAST_CNTL, ctrl->val); 847 break; 848 849 case V4L2_CID_SATURATION: 850 saa711x_write(sd, R_0C_CHROMA_SAT_CNTL, ctrl->val); 851 break; 852 853 case V4L2_CID_HUE: 854 saa711x_write(sd, R_0D_CHROMA_HUE_CNTL, ctrl->val); 855 break; 856 857 case V4L2_CID_CHROMA_AGC: 858 /* chroma gain cluster */ 859 if (state->agc->val) 860 saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val); 861 else 862 saa711x_write(sd, R_0F_CHROMA_GAIN_CNTL, state->gain->val | 0x80); 863 break; 864 865 default: 866 return -EINVAL; 867 } 868 869 return 0; 870 } 871 872 static int saa711x_set_size(struct v4l2_subdev *sd, int width, int height) 873 { 874 struct saa711x_state *state = to_state(sd); 875 int HPSC, HFSC; 876 int VSCY; 877 int res; 878 int is_50hz = state->std & V4L2_STD_625_50; 879 int Vsrc = is_50hz ? 576 : 480; 880 881 v4l2_dbg(1, debug, sd, "decoder set size to %ix%i\n", width, height); 882 883 /* FIXME need better bounds checking here */ 884 if ((width < 1) || (width > 1440)) 885 return -EINVAL; 886 if ((height < 1) || (height > Vsrc)) 887 return -EINVAL; 888 889 if (!saa711x_has_reg(state->ident, R_D0_B_HORIZ_PRESCALING)) { 890 /* Decoder only supports 720 columns and 480 or 576 lines */ 891 if (width != 720) 892 return -EINVAL; 893 if (height != Vsrc) 894 return -EINVAL; 895 } 896 897 state->width = width; 898 state->height = height; 899 900 if (!saa711x_has_reg(state->ident, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH)) 901 return 0; 902 903 /* probably have a valid size, let's set it */ 904 /* Set output width/height */ 905 /* width */ 906 907 saa711x_write(sd, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 908 (u8) (width & 0xff)); 909 saa711x_write(sd, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 910 (u8) ((width >> 8) & 0xff)); 911 912 /* Vertical Scaling uses height/2 */ 913 res = height / 2; 914 915 /* On 60Hz, it is using a higher Vertical Output Size */ 916 if (!is_50hz) 917 res += (VRES_60HZ - 480) >> 1; 918 919 /* height */ 920 saa711x_write(sd, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 921 (u8) (res & 0xff)); 922 saa711x_write(sd, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 923 (u8) ((res >> 8) & 0xff)); 924 925 /* Scaling settings */ 926 /* Hprescaler is floor(inres/outres) */ 927 HPSC = (int)(720 / width); 928 /* 0 is not allowed (div. by zero) */ 929 HPSC = HPSC ? HPSC : 1; 930 HFSC = (int)((1024 * 720) / (HPSC * width)); 931 /* FIXME hardcodes to "Task B" 932 * write H prescaler integer */ 933 saa711x_write(sd, R_D0_B_HORIZ_PRESCALING, 934 (u8) (HPSC & 0x3f)); 935 936 v4l2_dbg(1, debug, sd, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC); 937 /* write H fine-scaling (luminance) */ 938 saa711x_write(sd, R_D8_B_HORIZ_LUMA_SCALING_INC, 939 (u8) (HFSC & 0xff)); 940 saa711x_write(sd, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 941 (u8) ((HFSC >> 8) & 0xff)); 942 /* write H fine-scaling (chrominance) 943 * must be lum/2, so i'll just bitshift :) */ 944 saa711x_write(sd, R_DC_B_HORIZ_CHROMA_SCALING, 945 (u8) ((HFSC >> 1) & 0xff)); 946 saa711x_write(sd, R_DD_B_HORIZ_CHROMA_SCALING_MSB, 947 (u8) ((HFSC >> 9) & 0xff)); 948 949 VSCY = (int)((1024 * Vsrc) / height); 950 v4l2_dbg(1, debug, sd, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY); 951 952 /* Correct Contrast and Luminance */ 953 saa711x_write(sd, R_D5_B_LUMA_CONTRAST_CNTL, 954 (u8) (64 * 1024 / VSCY)); 955 saa711x_write(sd, R_D6_B_CHROMA_SATURATION_CNTL, 956 (u8) (64 * 1024 / VSCY)); 957 958 /* write V fine-scaling (luminance) */ 959 saa711x_write(sd, R_E0_B_VERT_LUMA_SCALING_INC, 960 (u8) (VSCY & 0xff)); 961 saa711x_write(sd, R_E1_B_VERT_LUMA_SCALING_INC_MSB, 962 (u8) ((VSCY >> 8) & 0xff)); 963 /* write V fine-scaling (chrominance) */ 964 saa711x_write(sd, R_E2_B_VERT_CHROMA_SCALING_INC, 965 (u8) (VSCY & 0xff)); 966 saa711x_write(sd, R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 967 (u8) ((VSCY >> 8) & 0xff)); 968 969 saa711x_writeregs(sd, saa7115_cfg_reset_scaler); 970 971 /* Activates task "B" */ 972 saa711x_write(sd, R_80_GLOBAL_CNTL_1, 973 saa711x_read(sd, R_80_GLOBAL_CNTL_1) | 0x20); 974 975 return 0; 976 } 977 978 static void saa711x_set_v4lstd(struct v4l2_subdev *sd, v4l2_std_id std) 979 { 980 struct saa711x_state *state = to_state(sd); 981 982 /* Prevent unnecessary standard changes. During a standard 983 change the I-Port is temporarily disabled. Any devices 984 reading from that port can get confused. 985 Note that s_std is also used to switch from 986 radio to TV mode, so if a s_std is broadcast to 987 all I2C devices then you do not want to have an unwanted 988 side-effect here. */ 989 if (std == state->std) 990 return; 991 992 state->std = std; 993 994 // This works for NTSC-M, SECAM-L and the 50Hz PAL variants. 995 if (std & V4L2_STD_525_60) { 996 v4l2_dbg(1, debug, sd, "decoder set standard 60 Hz\n"); 997 if (state->ident == GM7113C) { 998 u8 reg = saa711x_read(sd, R_08_SYNC_CNTL); 999 reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD); 1000 reg |= SAA7113_R_08_FSEL; 1001 saa711x_write(sd, R_08_SYNC_CNTL, reg); 1002 } else { 1003 saa711x_writeregs(sd, saa7115_cfg_60hz_video); 1004 } 1005 saa711x_set_size(sd, 720, 480); 1006 } else { 1007 v4l2_dbg(1, debug, sd, "decoder set standard 50 Hz\n"); 1008 if (state->ident == GM7113C) { 1009 u8 reg = saa711x_read(sd, R_08_SYNC_CNTL); 1010 reg &= ~(SAA7113_R_08_FSEL | SAA7113_R_08_AUFD); 1011 saa711x_write(sd, R_08_SYNC_CNTL, reg); 1012 } else { 1013 saa711x_writeregs(sd, saa7115_cfg_50hz_video); 1014 } 1015 saa711x_set_size(sd, 720, 576); 1016 } 1017 1018 /* Register 0E - Bits D6-D4 on NO-AUTO mode 1019 (SAA7111 and SAA7113 doesn't have auto mode) 1020 50 Hz / 625 lines 60 Hz / 525 lines 1021 000 PAL BGDHI (4.43Mhz) NTSC M (3.58MHz) 1022 001 NTSC 4.43 (50 Hz) PAL 4.43 (60 Hz) 1023 010 Combination-PAL N (3.58MHz) NTSC 4.43 (60 Hz) 1024 011 NTSC N (3.58MHz) PAL M (3.58MHz) 1025 100 reserved NTSC-Japan (3.58MHz) 1026 */ 1027 if (state->ident <= SAA7113 || 1028 state->ident == GM7113C) { 1029 u8 reg = saa711x_read(sd, R_0E_CHROMA_CNTL_1) & 0x8f; 1030 1031 if (std == V4L2_STD_PAL_M) { 1032 reg |= 0x30; 1033 } else if (std == V4L2_STD_PAL_Nc) { 1034 reg |= 0x20; 1035 } else if (std == V4L2_STD_PAL_60) { 1036 reg |= 0x10; 1037 } else if (std == V4L2_STD_NTSC_M_JP) { 1038 reg |= 0x40; 1039 } else if (std & V4L2_STD_SECAM) { 1040 reg |= 0x50; 1041 } 1042 saa711x_write(sd, R_0E_CHROMA_CNTL_1, reg); 1043 } else { 1044 /* restart task B if needed */ 1045 int taskb = saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10; 1046 1047 if (taskb && state->ident == SAA7114) 1048 saa711x_writeregs(sd, saa7115_cfg_vbi_on); 1049 1050 /* switch audio mode too! */ 1051 saa711x_s_clock_freq(sd, state->audclk_freq); 1052 } 1053 } 1054 1055 /* setup the sliced VBI lcr registers according to the sliced VBI format */ 1056 static void saa711x_set_lcr(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) 1057 { 1058 struct saa711x_state *state = to_state(sd); 1059 int is_50hz = (state->std & V4L2_STD_625_50); 1060 u8 lcr[24]; 1061 int i, x; 1062 1063 #if 1 1064 /* saa7113/7114/7118 VBI support are experimental */ 1065 if (!saa711x_has_reg(state->ident, R_41_LCR_BASE)) 1066 return; 1067 1068 #else 1069 /* SAA7113 and SAA7118 also should support VBI - Need testing */ 1070 if (state->ident != SAA7115) 1071 return; 1072 #endif 1073 1074 for (i = 0; i <= 23; i++) 1075 lcr[i] = 0xff; 1076 1077 if (fmt == NULL) { 1078 /* raw VBI */ 1079 if (is_50hz) 1080 for (i = 6; i <= 23; i++) 1081 lcr[i] = 0xdd; 1082 else 1083 for (i = 10; i <= 21; i++) 1084 lcr[i] = 0xdd; 1085 } else { 1086 /* sliced VBI */ 1087 /* first clear lines that cannot be captured */ 1088 if (is_50hz) { 1089 for (i = 0; i <= 5; i++) 1090 fmt->service_lines[0][i] = 1091 fmt->service_lines[1][i] = 0; 1092 } 1093 else { 1094 for (i = 0; i <= 9; i++) 1095 fmt->service_lines[0][i] = 1096 fmt->service_lines[1][i] = 0; 1097 for (i = 22; i <= 23; i++) 1098 fmt->service_lines[0][i] = 1099 fmt->service_lines[1][i] = 0; 1100 } 1101 1102 /* Now set the lcr values according to the specified service */ 1103 for (i = 6; i <= 23; i++) { 1104 lcr[i] = 0; 1105 for (x = 0; x <= 1; x++) { 1106 switch (fmt->service_lines[1-x][i]) { 1107 case 0: 1108 lcr[i] |= 0xf << (4 * x); 1109 break; 1110 case V4L2_SLICED_TELETEXT_B: 1111 lcr[i] |= 1 << (4 * x); 1112 break; 1113 case V4L2_SLICED_CAPTION_525: 1114 lcr[i] |= 4 << (4 * x); 1115 break; 1116 case V4L2_SLICED_WSS_625: 1117 lcr[i] |= 5 << (4 * x); 1118 break; 1119 case V4L2_SLICED_VPS: 1120 lcr[i] |= 7 << (4 * x); 1121 break; 1122 } 1123 } 1124 } 1125 } 1126 1127 /* write the lcr registers */ 1128 for (i = 2; i <= 23; i++) { 1129 saa711x_write(sd, i - 2 + R_41_LCR_BASE, lcr[i]); 1130 } 1131 1132 /* enable/disable raw VBI capturing */ 1133 saa711x_writeregs(sd, fmt == NULL ? 1134 saa7115_cfg_vbi_on : 1135 saa7115_cfg_vbi_off); 1136 } 1137 1138 static int saa711x_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *sliced) 1139 { 1140 static u16 lcr2vbi[] = { 1141 0, V4L2_SLICED_TELETEXT_B, 0, /* 1 */ 1142 0, V4L2_SLICED_CAPTION_525, /* 4 */ 1143 V4L2_SLICED_WSS_625, 0, /* 5 */ 1144 V4L2_SLICED_VPS, 0, 0, 0, 0, /* 7 */ 1145 0, 0, 0, 0 1146 }; 1147 int i; 1148 1149 memset(sliced->service_lines, 0, sizeof(sliced->service_lines)); 1150 sliced->service_set = 0; 1151 /* done if using raw VBI */ 1152 if (saa711x_read(sd, R_80_GLOBAL_CNTL_1) & 0x10) 1153 return 0; 1154 for (i = 2; i <= 23; i++) { 1155 u8 v = saa711x_read(sd, i - 2 + R_41_LCR_BASE); 1156 1157 sliced->service_lines[0][i] = lcr2vbi[v >> 4]; 1158 sliced->service_lines[1][i] = lcr2vbi[v & 0xf]; 1159 sliced->service_set |= 1160 sliced->service_lines[0][i] | sliced->service_lines[1][i]; 1161 } 1162 return 0; 1163 } 1164 1165 static int saa711x_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt) 1166 { 1167 saa711x_set_lcr(sd, NULL); 1168 return 0; 1169 } 1170 1171 static int saa711x_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt) 1172 { 1173 saa711x_set_lcr(sd, fmt); 1174 return 0; 1175 } 1176 1177 static int saa711x_set_fmt(struct v4l2_subdev *sd, 1178 struct v4l2_subdev_pad_config *cfg, 1179 struct v4l2_subdev_format *format) 1180 { 1181 struct v4l2_mbus_framefmt *fmt = &format->format; 1182 1183 if (format->pad || fmt->code != MEDIA_BUS_FMT_FIXED) 1184 return -EINVAL; 1185 fmt->field = V4L2_FIELD_INTERLACED; 1186 fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; 1187 if (format->which == V4L2_SUBDEV_FORMAT_TRY) 1188 return 0; 1189 return saa711x_set_size(sd, fmt->width, fmt->height); 1190 } 1191 1192 /* Decode the sliced VBI data stream as created by the saa7115. 1193 The format is described in the saa7115 datasheet in Tables 25 and 26 1194 and in Figure 33. 1195 The current implementation uses SAV/EAV codes and not the ancillary data 1196 headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV 1197 code. */ 1198 static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi) 1199 { 1200 struct saa711x_state *state = to_state(sd); 1201 static const char vbi_no_data_pattern[] = { 1202 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0, 0xa0 1203 }; 1204 u8 *p = vbi->p; 1205 u32 wss; 1206 int id1, id2; /* the ID1 and ID2 bytes from the internal header */ 1207 1208 vbi->type = 0; /* mark result as a failure */ 1209 id1 = p[2]; 1210 id2 = p[3]; 1211 /* Note: the field bit is inverted for 60 Hz video */ 1212 if (state->std & V4L2_STD_525_60) 1213 id1 ^= 0x40; 1214 1215 /* Skip internal header, p now points to the start of the payload */ 1216 p += 4; 1217 vbi->p = p; 1218 1219 /* calculate field and line number of the VBI packet (1-23) */ 1220 vbi->is_second_field = ((id1 & 0x40) != 0); 1221 vbi->line = (id1 & 0x3f) << 3; 1222 vbi->line |= (id2 & 0x70) >> 4; 1223 1224 /* Obtain data type */ 1225 id2 &= 0xf; 1226 1227 /* If the VBI slicer does not detect any signal it will fill up 1228 the payload buffer with 0xa0 bytes. */ 1229 if (!memcmp(p, vbi_no_data_pattern, sizeof(vbi_no_data_pattern))) 1230 return 0; 1231 1232 /* decode payloads */ 1233 switch (id2) { 1234 case 1: 1235 vbi->type = V4L2_SLICED_TELETEXT_B; 1236 break; 1237 case 4: 1238 if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) 1239 return 0; 1240 vbi->type = V4L2_SLICED_CAPTION_525; 1241 break; 1242 case 5: 1243 wss = saa711x_decode_wss(p); 1244 if (wss == -1) 1245 return 0; 1246 p[0] = wss & 0xff; 1247 p[1] = wss >> 8; 1248 vbi->type = V4L2_SLICED_WSS_625; 1249 break; 1250 case 7: 1251 if (saa711x_decode_vps(p, p) != 0) 1252 return 0; 1253 vbi->type = V4L2_SLICED_VPS; 1254 break; 1255 default: 1256 break; 1257 } 1258 return 0; 1259 } 1260 1261 /* ============ SAA7115 AUDIO settings (end) ============= */ 1262 1263 static int saa711x_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) 1264 { 1265 struct saa711x_state *state = to_state(sd); 1266 int status; 1267 1268 if (state->radio) 1269 return 0; 1270 status = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1271 1272 v4l2_dbg(1, debug, sd, "status: 0x%02x\n", status); 1273 vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0; 1274 return 0; 1275 } 1276 1277 static int saa711x_s_std(struct v4l2_subdev *sd, v4l2_std_id std) 1278 { 1279 struct saa711x_state *state = to_state(sd); 1280 1281 state->radio = 0; 1282 saa711x_set_v4lstd(sd, std); 1283 return 0; 1284 } 1285 1286 static int saa711x_s_radio(struct v4l2_subdev *sd) 1287 { 1288 struct saa711x_state *state = to_state(sd); 1289 1290 state->radio = 1; 1291 return 0; 1292 } 1293 1294 static int saa711x_s_routing(struct v4l2_subdev *sd, 1295 u32 input, u32 output, u32 config) 1296 { 1297 struct saa711x_state *state = to_state(sd); 1298 u8 mask = (state->ident <= SAA7111A) ? 0xf8 : 0xf0; 1299 1300 v4l2_dbg(1, debug, sd, "decoder set input %d output %d\n", 1301 input, output); 1302 1303 /* saa7111/3 does not have these inputs */ 1304 if ((state->ident <= SAA7113 || 1305 state->ident == GM7113C) && 1306 (input == SAA7115_COMPOSITE4 || 1307 input == SAA7115_COMPOSITE5)) { 1308 return -EINVAL; 1309 } 1310 if (input > SAA7115_SVIDEO3) 1311 return -EINVAL; 1312 if (state->input == input && state->output == output) 1313 return 0; 1314 v4l2_dbg(1, debug, sd, "now setting %s input %s output\n", 1315 (input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", 1316 (output == SAA7115_IPORT_ON) ? "iport on" : "iport off"); 1317 state->input = input; 1318 1319 /* saa7111 has slightly different input numbering */ 1320 if (state->ident <= SAA7111A) { 1321 if (input >= SAA7115_COMPOSITE4) 1322 input -= 2; 1323 /* saa7111 specific */ 1324 saa711x_write(sd, R_10_CHROMA_CNTL_2, 1325 (saa711x_read(sd, R_10_CHROMA_CNTL_2) & 0x3f) | 1326 ((output & 0xc0) ^ 0x40)); 1327 saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, 1328 (saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) | 1329 ((output & 2) ? 0x0a : 0)); 1330 } 1331 1332 /* select mode */ 1333 saa711x_write(sd, R_02_INPUT_CNTL_1, 1334 (saa711x_read(sd, R_02_INPUT_CNTL_1) & mask) | 1335 input); 1336 1337 /* bypass chrominance trap for S-Video modes */ 1338 saa711x_write(sd, R_09_LUMA_CNTL, 1339 (saa711x_read(sd, R_09_LUMA_CNTL) & 0x7f) | 1340 (state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0)); 1341 1342 state->output = output; 1343 if (state->ident == SAA7114 || 1344 state->ident == SAA7115) { 1345 saa711x_write(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 1346 (saa711x_read(sd, R_83_X_PORT_I_O_ENA_AND_OUT_CLK) & 0xfe) | 1347 (state->output & 0x01)); 1348 } 1349 if (state->ident > SAA7111A) { 1350 if (config & SAA7115_IDQ_IS_DEFAULT) 1351 saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x20); 1352 else 1353 saa711x_write(sd, R_85_I_PORT_SIGNAL_POLAR, 0x21); 1354 } 1355 return 0; 1356 } 1357 1358 static int saa711x_s_gpio(struct v4l2_subdev *sd, u32 val) 1359 { 1360 struct saa711x_state *state = to_state(sd); 1361 1362 if (state->ident > SAA7111A) 1363 return -EINVAL; 1364 saa711x_write(sd, 0x11, (saa711x_read(sd, 0x11) & 0x7f) | 1365 (val ? 0x80 : 0)); 1366 return 0; 1367 } 1368 1369 static int saa711x_s_stream(struct v4l2_subdev *sd, int enable) 1370 { 1371 struct saa711x_state *state = to_state(sd); 1372 1373 v4l2_dbg(1, debug, sd, "%s output\n", 1374 enable ? "enable" : "disable"); 1375 1376 if (state->enable == enable) 1377 return 0; 1378 state->enable = enable; 1379 if (!saa711x_has_reg(state->ident, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED)) 1380 return 0; 1381 saa711x_write(sd, R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, state->enable); 1382 return 0; 1383 } 1384 1385 static int saa711x_s_crystal_freq(struct v4l2_subdev *sd, u32 freq, u32 flags) 1386 { 1387 struct saa711x_state *state = to_state(sd); 1388 1389 if (freq != SAA7115_FREQ_32_11_MHZ && freq != SAA7115_FREQ_24_576_MHZ) 1390 return -EINVAL; 1391 state->crystal_freq = freq; 1392 state->double_asclk = flags & SAA7115_FREQ_FL_DOUBLE_ASCLK; 1393 state->cgcdiv = (flags & SAA7115_FREQ_FL_CGCDIV) ? 3 : 4; 1394 state->ucgc = flags & SAA7115_FREQ_FL_UCGC; 1395 state->apll = flags & SAA7115_FREQ_FL_APLL; 1396 saa711x_s_clock_freq(sd, state->audclk_freq); 1397 return 0; 1398 } 1399 1400 static int saa711x_reset(struct v4l2_subdev *sd, u32 val) 1401 { 1402 v4l2_dbg(1, debug, sd, "decoder RESET\n"); 1403 saa711x_writeregs(sd, saa7115_cfg_reset_scaler); 1404 return 0; 1405 } 1406 1407 static int saa711x_g_vbi_data(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *data) 1408 { 1409 /* Note: the internal field ID is inverted for NTSC, 1410 so data->field 0 maps to the saa7115 even field, 1411 whereas for PAL it maps to the saa7115 odd field. */ 1412 switch (data->id) { 1413 case V4L2_SLICED_WSS_625: 1414 if (saa711x_read(sd, 0x6b) & 0xc0) 1415 return -EIO; 1416 data->data[0] = saa711x_read(sd, 0x6c); 1417 data->data[1] = saa711x_read(sd, 0x6d); 1418 return 0; 1419 case V4L2_SLICED_CAPTION_525: 1420 if (data->field == 0) { 1421 /* CC */ 1422 if (saa711x_read(sd, 0x66) & 0x30) 1423 return -EIO; 1424 data->data[0] = saa711x_read(sd, 0x69); 1425 data->data[1] = saa711x_read(sd, 0x6a); 1426 return 0; 1427 } 1428 /* XDS */ 1429 if (saa711x_read(sd, 0x66) & 0xc0) 1430 return -EIO; 1431 data->data[0] = saa711x_read(sd, 0x67); 1432 data->data[1] = saa711x_read(sd, 0x68); 1433 return 0; 1434 default: 1435 return -EINVAL; 1436 } 1437 } 1438 1439 static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std) 1440 { 1441 struct saa711x_state *state = to_state(sd); 1442 int reg1f, reg1e; 1443 1444 /* 1445 * The V4L2 core already initializes std with all supported 1446 * Standards. All driver needs to do is to mask it, to remove 1447 * standards that don't apply from the mask 1448 */ 1449 1450 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1451 1452 if (state->ident == SAA7115) { 1453 reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); 1454 1455 v4l2_dbg(1, debug, sd, "Status byte 1 (0x1e)=0x%02x\n", reg1e); 1456 1457 switch (reg1e & 0x03) { 1458 case 1: 1459 *std &= V4L2_STD_NTSC; 1460 break; 1461 case 2: 1462 /* 1463 * V4L2_STD_PAL just cover the european PAL standards. 1464 * This is wrong, as the device could also be using an 1465 * other PAL standard. 1466 */ 1467 *std &= V4L2_STD_PAL | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | 1468 V4L2_STD_PAL_M | V4L2_STD_PAL_60; 1469 break; 1470 case 3: 1471 *std &= V4L2_STD_SECAM; 1472 break; 1473 default: 1474 *std = V4L2_STD_UNKNOWN; 1475 /* Can't detect anything */ 1476 break; 1477 } 1478 } 1479 1480 v4l2_dbg(1, debug, sd, "Status byte 2 (0x1f)=0x%02x\n", reg1f); 1481 1482 /* horizontal/vertical not locked */ 1483 if (reg1f & 0x40) { 1484 *std = V4L2_STD_UNKNOWN; 1485 goto ret; 1486 } 1487 1488 if (reg1f & 0x20) 1489 *std &= V4L2_STD_525_60; 1490 else 1491 *std &= V4L2_STD_625_50; 1492 1493 ret: 1494 v4l2_dbg(1, debug, sd, "detected std mask = %08Lx\n", *std); 1495 1496 return 0; 1497 } 1498 1499 static int saa711x_g_input_status(struct v4l2_subdev *sd, u32 *status) 1500 { 1501 struct saa711x_state *state = to_state(sd); 1502 int reg1e = 0x80; 1503 int reg1f; 1504 1505 *status = V4L2_IN_ST_NO_SIGNAL; 1506 if (state->ident == SAA7115) 1507 reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); 1508 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1509 if ((reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80) 1510 *status = 0; 1511 return 0; 1512 } 1513 1514 #ifdef CONFIG_VIDEO_ADV_DEBUG 1515 static int saa711x_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) 1516 { 1517 reg->val = saa711x_read(sd, reg->reg & 0xff); 1518 reg->size = 1; 1519 return 0; 1520 } 1521 1522 static int saa711x_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) 1523 { 1524 saa711x_write(sd, reg->reg & 0xff, reg->val & 0xff); 1525 return 0; 1526 } 1527 #endif 1528 1529 static int saa711x_log_status(struct v4l2_subdev *sd) 1530 { 1531 struct saa711x_state *state = to_state(sd); 1532 int reg1e, reg1f; 1533 int signalOk; 1534 int vcr; 1535 1536 v4l2_info(sd, "Audio frequency: %d Hz\n", state->audclk_freq); 1537 if (state->ident != SAA7115) { 1538 /* status for the saa7114 */ 1539 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1540 signalOk = (reg1f & 0xc1) == 0x81; 1541 v4l2_info(sd, "Video signal: %s\n", signalOk ? "ok" : "bad"); 1542 v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); 1543 return 0; 1544 } 1545 1546 /* status for the saa7115 */ 1547 reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC); 1548 reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC); 1549 1550 signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80; 1551 vcr = !(reg1f & 0x10); 1552 1553 if (state->input >= 6) 1554 v4l2_info(sd, "Input: S-Video %d\n", state->input - 6); 1555 else 1556 v4l2_info(sd, "Input: Composite %d\n", state->input); 1557 v4l2_info(sd, "Video signal: %s\n", signalOk ? (vcr ? "VCR" : "broadcast/DVD") : "bad"); 1558 v4l2_info(sd, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz"); 1559 1560 switch (reg1e & 0x03) { 1561 case 1: 1562 v4l2_info(sd, "Detected format: NTSC\n"); 1563 break; 1564 case 2: 1565 v4l2_info(sd, "Detected format: PAL\n"); 1566 break; 1567 case 3: 1568 v4l2_info(sd, "Detected format: SECAM\n"); 1569 break; 1570 default: 1571 v4l2_info(sd, "Detected format: BW/No color\n"); 1572 break; 1573 } 1574 v4l2_info(sd, "Width, Height: %d, %d\n", state->width, state->height); 1575 v4l2_ctrl_handler_log_status(&state->hdl, sd->name); 1576 return 0; 1577 } 1578 1579 /* ----------------------------------------------------------------------- */ 1580 1581 static const struct v4l2_ctrl_ops saa711x_ctrl_ops = { 1582 .s_ctrl = saa711x_s_ctrl, 1583 .g_volatile_ctrl = saa711x_g_volatile_ctrl, 1584 }; 1585 1586 static const struct v4l2_subdev_core_ops saa711x_core_ops = { 1587 .log_status = saa711x_log_status, 1588 .reset = saa711x_reset, 1589 .s_gpio = saa711x_s_gpio, 1590 #ifdef CONFIG_VIDEO_ADV_DEBUG 1591 .g_register = saa711x_g_register, 1592 .s_register = saa711x_s_register, 1593 #endif 1594 }; 1595 1596 static const struct v4l2_subdev_tuner_ops saa711x_tuner_ops = { 1597 .s_radio = saa711x_s_radio, 1598 .g_tuner = saa711x_g_tuner, 1599 }; 1600 1601 static const struct v4l2_subdev_audio_ops saa711x_audio_ops = { 1602 .s_clock_freq = saa711x_s_clock_freq, 1603 }; 1604 1605 static const struct v4l2_subdev_video_ops saa711x_video_ops = { 1606 .s_std = saa711x_s_std, 1607 .s_routing = saa711x_s_routing, 1608 .s_crystal_freq = saa711x_s_crystal_freq, 1609 .s_stream = saa711x_s_stream, 1610 .querystd = saa711x_querystd, 1611 .g_input_status = saa711x_g_input_status, 1612 }; 1613 1614 static const struct v4l2_subdev_vbi_ops saa711x_vbi_ops = { 1615 .g_vbi_data = saa711x_g_vbi_data, 1616 .decode_vbi_line = saa711x_decode_vbi_line, 1617 .g_sliced_fmt = saa711x_g_sliced_fmt, 1618 .s_sliced_fmt = saa711x_s_sliced_fmt, 1619 .s_raw_fmt = saa711x_s_raw_fmt, 1620 }; 1621 1622 static const struct v4l2_subdev_pad_ops saa711x_pad_ops = { 1623 .set_fmt = saa711x_set_fmt, 1624 }; 1625 1626 static const struct v4l2_subdev_ops saa711x_ops = { 1627 .core = &saa711x_core_ops, 1628 .tuner = &saa711x_tuner_ops, 1629 .audio = &saa711x_audio_ops, 1630 .video = &saa711x_video_ops, 1631 .vbi = &saa711x_vbi_ops, 1632 .pad = &saa711x_pad_ops, 1633 }; 1634 1635 #define CHIP_VER_SIZE 16 1636 1637 /* ----------------------------------------------------------------------- */ 1638 1639 static void saa711x_write_platform_data(struct saa711x_state *state, 1640 struct saa7115_platform_data *data) 1641 { 1642 struct v4l2_subdev *sd = &state->sd; 1643 u8 work; 1644 1645 if (state->ident != GM7113C && 1646 state->ident != SAA7113) 1647 return; 1648 1649 if (data->saa7113_r08_htc) { 1650 work = saa711x_read(sd, R_08_SYNC_CNTL); 1651 work &= ~SAA7113_R_08_HTC_MASK; 1652 work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET); 1653 saa711x_write(sd, R_08_SYNC_CNTL, work); 1654 } 1655 1656 if (data->saa7113_r10_vrln) { 1657 work = saa711x_read(sd, R_10_CHROMA_CNTL_2); 1658 work &= ~SAA7113_R_10_VRLN_MASK; 1659 if (*data->saa7113_r10_vrln) 1660 work |= (1 << SAA7113_R_10_VRLN_OFFSET); 1661 saa711x_write(sd, R_10_CHROMA_CNTL_2, work); 1662 } 1663 1664 if (data->saa7113_r10_ofts) { 1665 work = saa711x_read(sd, R_10_CHROMA_CNTL_2); 1666 work &= ~SAA7113_R_10_OFTS_MASK; 1667 work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET); 1668 saa711x_write(sd, R_10_CHROMA_CNTL_2, work); 1669 } 1670 1671 if (data->saa7113_r12_rts0) { 1672 work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); 1673 work &= ~SAA7113_R_12_RTS0_MASK; 1674 work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET); 1675 1676 /* According to the datasheet, 1677 * SAA7113_RTS_DOT_IN should only be used on RTS1 */ 1678 WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN); 1679 saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); 1680 } 1681 1682 if (data->saa7113_r12_rts1) { 1683 work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); 1684 work &= ~SAA7113_R_12_RTS1_MASK; 1685 work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET); 1686 saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); 1687 } 1688 1689 if (data->saa7113_r13_adlsb) { 1690 work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL); 1691 work &= ~SAA7113_R_13_ADLSB_MASK; 1692 if (*data->saa7113_r13_adlsb) 1693 work |= (1 << SAA7113_R_13_ADLSB_OFFSET); 1694 saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work); 1695 } 1696 } 1697 1698 /** 1699 * saa711x_detect_chip - Detects the saa711x (or clone) variant 1700 * @client: I2C client structure. 1701 * @id: I2C device ID structure. 1702 * @name: Name of the device to be filled. 1703 * 1704 * Detects the Philips/NXP saa711x chip, or some clone of it. 1705 * if 'id' is NULL or id->driver_data is equal to 1, it auto-probes 1706 * the analog demod. 1707 * If the tuner is not found, it returns -ENODEV. 1708 * If auto-detection is disabled and the tuner doesn't match what it was 1709 * required, it returns -EINVAL and fills 'name'. 1710 * If the chip is found, it returns the chip ID and fills 'name'. 1711 */ 1712 static int saa711x_detect_chip(struct i2c_client *client, 1713 const struct i2c_device_id *id, 1714 char *name) 1715 { 1716 char chip_ver[CHIP_VER_SIZE]; 1717 char chip_id; 1718 int i; 1719 int autodetect; 1720 1721 autodetect = !id || id->driver_data == 1; 1722 1723 /* Read the chip version register */ 1724 for (i = 0; i < CHIP_VER_SIZE; i++) { 1725 i2c_smbus_write_byte_data(client, 0, i); 1726 chip_ver[i] = i2c_smbus_read_byte_data(client, 0); 1727 name[i] = (chip_ver[i] & 0x0f) + '0'; 1728 if (name[i] > '9') 1729 name[i] += 'a' - '9' - 1; 1730 } 1731 name[i] = '\0'; 1732 1733 /* Check if it is a Philips/NXP chip */ 1734 if (!memcmp(name + 1, "f711", 4)) { 1735 chip_id = name[5]; 1736 snprintf(name, CHIP_VER_SIZE, "saa711%c", chip_id); 1737 1738 if (!autodetect && strcmp(name, id->name)) 1739 return -EINVAL; 1740 1741 switch (chip_id) { 1742 case '1': 1743 if (chip_ver[0] & 0xf0) { 1744 snprintf(name, CHIP_VER_SIZE, "saa711%ca", chip_id); 1745 v4l_info(client, "saa7111a variant found\n"); 1746 return SAA7111A; 1747 } 1748 return SAA7111; 1749 case '3': 1750 return SAA7113; 1751 case '4': 1752 return SAA7114; 1753 case '5': 1754 return SAA7115; 1755 case '8': 1756 return SAA7118; 1757 default: 1758 v4l2_info(client, 1759 "WARNING: Philips/NXP chip unknown - Falling back to saa7111\n"); 1760 return SAA7111; 1761 } 1762 } 1763 1764 /* Check if it is a gm7113c */ 1765 if (!memcmp(name, "0000", 4)) { 1766 chip_id = 0; 1767 for (i = 0; i < 4; i++) { 1768 chip_id = chip_id << 1; 1769 chip_id |= (chip_ver[i] & 0x80) ? 1 : 0; 1770 } 1771 1772 /* 1773 * Note: From the datasheet, only versions 1 and 2 1774 * exists. However, tests on a device labeled as: 1775 * "GM7113C 1145" returned "10" on all 16 chip 1776 * version (reg 0x00) reads. So, we need to also 1777 * accept at least verion 0. For now, let's just 1778 * assume that a device that returns "0000" for 1779 * the lower nibble is a gm7113c. 1780 */ 1781 1782 strlcpy(name, "gm7113c", CHIP_VER_SIZE); 1783 1784 if (!autodetect && strcmp(name, id->name)) 1785 return -EINVAL; 1786 1787 v4l_dbg(1, debug, client, 1788 "It seems to be a %s chip (%*ph) @ 0x%x.\n", 1789 name, 16, chip_ver, client->addr << 1); 1790 1791 return GM7113C; 1792 } 1793 1794 /* Check if it is a CJC7113 */ 1795 if (!memcmp(name, "1111111111111111", CHIP_VER_SIZE)) { 1796 strlcpy(name, "cjc7113", CHIP_VER_SIZE); 1797 1798 if (!autodetect && strcmp(name, id->name)) 1799 return -EINVAL; 1800 1801 v4l_dbg(1, debug, client, 1802 "It seems to be a %s chip (%*ph) @ 0x%x.\n", 1803 name, 16, chip_ver, client->addr << 1); 1804 1805 /* CJC7113 seems to be SAA7113-compatible */ 1806 return SAA7113; 1807 } 1808 1809 /* Chip was not discovered. Return its ID and don't bind */ 1810 v4l_dbg(1, debug, client, "chip %*ph @ 0x%x is unknown.\n", 1811 16, chip_ver, client->addr << 1); 1812 return -ENODEV; 1813 } 1814 1815 static int saa711x_probe(struct i2c_client *client, 1816 const struct i2c_device_id *id) 1817 { 1818 struct saa711x_state *state; 1819 struct v4l2_subdev *sd; 1820 struct v4l2_ctrl_handler *hdl; 1821 struct saa7115_platform_data *pdata; 1822 int ident; 1823 char name[CHIP_VER_SIZE + 1]; 1824 #if defined(CONFIG_MEDIA_CONTROLLER) 1825 int ret; 1826 #endif 1827 1828 /* Check if the adapter supports the needed features */ 1829 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 1830 return -EIO; 1831 1832 ident = saa711x_detect_chip(client, id, name); 1833 if (ident == -EINVAL) { 1834 /* Chip exists, but doesn't match */ 1835 v4l_warn(client, "found %s while %s was expected\n", 1836 name, id->name); 1837 return -ENODEV; 1838 } 1839 if (ident < 0) 1840 return ident; 1841 1842 strlcpy(client->name, name, sizeof(client->name)); 1843 1844 state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); 1845 if (state == NULL) 1846 return -ENOMEM; 1847 sd = &state->sd; 1848 v4l2_i2c_subdev_init(sd, client, &saa711x_ops); 1849 1850 #if defined(CONFIG_MEDIA_CONTROLLER) 1851 state->pads[DEMOD_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; 1852 state->pads[DEMOD_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE; 1853 state->pads[DEMOD_PAD_VBI_OUT].flags = MEDIA_PAD_FL_SOURCE; 1854 1855 sd->entity.function = MEDIA_ENT_F_ATV_DECODER; 1856 1857 ret = media_entity_pads_init(&sd->entity, DEMOD_NUM_PADS, state->pads); 1858 if (ret < 0) 1859 return ret; 1860 #endif 1861 1862 v4l_info(client, "%s found @ 0x%x (%s)\n", name, 1863 client->addr << 1, client->adapter->name); 1864 hdl = &state->hdl; 1865 v4l2_ctrl_handler_init(hdl, 6); 1866 /* add in ascending ID order */ 1867 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1868 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); 1869 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1870 V4L2_CID_CONTRAST, 0, 127, 1, 64); 1871 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1872 V4L2_CID_SATURATION, 0, 127, 1, 64); 1873 v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1874 V4L2_CID_HUE, -128, 127, 1, 0); 1875 state->agc = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1876 V4L2_CID_CHROMA_AGC, 0, 1, 1, 1); 1877 state->gain = v4l2_ctrl_new_std(hdl, &saa711x_ctrl_ops, 1878 V4L2_CID_CHROMA_GAIN, 0, 127, 1, 40); 1879 sd->ctrl_handler = hdl; 1880 if (hdl->error) { 1881 int err = hdl->error; 1882 1883 v4l2_ctrl_handler_free(hdl); 1884 return err; 1885 } 1886 v4l2_ctrl_auto_cluster(2, &state->agc, 0, true); 1887 1888 state->input = -1; 1889 state->output = SAA7115_IPORT_ON; 1890 state->enable = 1; 1891 state->radio = 0; 1892 state->ident = ident; 1893 1894 state->audclk_freq = 48000; 1895 1896 v4l2_dbg(1, debug, sd, "writing init values\n"); 1897 1898 /* init to 60hz/48khz */ 1899 state->crystal_freq = SAA7115_FREQ_24_576_MHZ; 1900 pdata = client->dev.platform_data; 1901 switch (state->ident) { 1902 case SAA7111: 1903 case SAA7111A: 1904 saa711x_writeregs(sd, saa7111_init); 1905 break; 1906 case GM7113C: 1907 saa711x_writeregs(sd, gm7113c_init); 1908 break; 1909 case SAA7113: 1910 if (pdata && pdata->saa7113_force_gm7113c_init) 1911 saa711x_writeregs(sd, gm7113c_init); 1912 else 1913 saa711x_writeregs(sd, saa7113_init); 1914 break; 1915 default: 1916 state->crystal_freq = SAA7115_FREQ_32_11_MHZ; 1917 saa711x_writeregs(sd, saa7115_init_auto_input); 1918 } 1919 if (state->ident > SAA7111A && state->ident != GM7113C) 1920 saa711x_writeregs(sd, saa7115_init_misc); 1921 1922 if (pdata) 1923 saa711x_write_platform_data(state, pdata); 1924 1925 saa711x_set_v4lstd(sd, V4L2_STD_NTSC); 1926 v4l2_ctrl_handler_setup(hdl); 1927 1928 v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n", 1929 saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC), 1930 saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC)); 1931 return 0; 1932 } 1933 1934 /* ----------------------------------------------------------------------- */ 1935 1936 static int saa711x_remove(struct i2c_client *client) 1937 { 1938 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1939 1940 v4l2_device_unregister_subdev(sd); 1941 v4l2_ctrl_handler_free(sd->ctrl_handler); 1942 return 0; 1943 } 1944 1945 static const struct i2c_device_id saa711x_id[] = { 1946 { "saa7115_auto", 1 }, /* autodetect */ 1947 { "saa7111", 0 }, 1948 { "saa7113", 0 }, 1949 { "saa7114", 0 }, 1950 { "saa7115", 0 }, 1951 { "saa7118", 0 }, 1952 { "gm7113c", 0 }, 1953 { } 1954 }; 1955 MODULE_DEVICE_TABLE(i2c, saa711x_id); 1956 1957 static struct i2c_driver saa711x_driver = { 1958 .driver = { 1959 .name = "saa7115", 1960 }, 1961 .probe = saa711x_probe, 1962 .remove = saa711x_remove, 1963 .id_table = saa711x_id, 1964 }; 1965 1966 module_i2c_driver(saa711x_driver); 1967