1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 Driver for SAA6588 RDS decoder 4 5 (c) 2005 Hans J. Koch 6 7 */ 8 9 10 #include <linux/module.h> 11 #include <linux/kernel.h> 12 #include <linux/i2c.h> 13 #include <linux/types.h> 14 #include <linux/videodev2.h> 15 #include <linux/init.h> 16 #include <linux/errno.h> 17 #include <linux/slab.h> 18 #include <linux/poll.h> 19 #include <linux/wait.h> 20 #include <linux/uaccess.h> 21 22 #include <media/i2c/saa6588.h> 23 #include <media/v4l2-device.h> 24 25 26 /* insmod options */ 27 static unsigned int debug; 28 static unsigned int xtal; 29 static unsigned int mmbs; 30 static unsigned int plvl; 31 static unsigned int bufblocks = 100; 32 33 module_param(debug, int, 0644); 34 MODULE_PARM_DESC(debug, "enable debug messages"); 35 module_param(xtal, int, 0); 36 MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0"); 37 module_param(mmbs, int, 0); 38 MODULE_PARM_DESC(mmbs, "enable MMBS mode: 0=off (default), 1=on"); 39 module_param(plvl, int, 0); 40 MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0"); 41 module_param(bufblocks, int, 0); 42 MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100"); 43 44 MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder"); 45 MODULE_AUTHOR("Hans J. Koch <koch@hjk-az.de>"); 46 47 MODULE_LICENSE("GPL"); 48 49 /* ---------------------------------------------------------------------- */ 50 51 #define UNSET (-1U) 52 #define PREFIX "saa6588: " 53 #define dprintk if (debug) printk 54 55 struct saa6588 { 56 struct v4l2_subdev sd; 57 struct delayed_work work; 58 spinlock_t lock; 59 unsigned char *buffer; 60 unsigned int buf_size; 61 unsigned int rd_index; 62 unsigned int wr_index; 63 unsigned int block_count; 64 unsigned char last_blocknum; 65 wait_queue_head_t read_queue; 66 int data_available_for_read; 67 u8 sync; 68 }; 69 70 static inline struct saa6588 *to_saa6588(struct v4l2_subdev *sd) 71 { 72 return container_of(sd, struct saa6588, sd); 73 } 74 75 /* ---------------------------------------------------------------------- */ 76 77 /* 78 * SAA6588 defines 79 */ 80 81 /* Initialization and mode control byte (0w) */ 82 83 /* bit 0+1 (DAC0/DAC1) */ 84 #define cModeStandard 0x00 85 #define cModeFastPI 0x01 86 #define cModeReducedRequest 0x02 87 #define cModeInvalid 0x03 88 89 /* bit 2 (RBDS) */ 90 #define cProcessingModeRDS 0x00 91 #define cProcessingModeRBDS 0x04 92 93 /* bit 3+4 (SYM0/SYM1) */ 94 #define cErrCorrectionNone 0x00 95 #define cErrCorrection2Bits 0x08 96 #define cErrCorrection5Bits 0x10 97 #define cErrCorrectionNoneRBDS 0x18 98 99 /* bit 5 (NWSY) */ 100 #define cSyncNormal 0x00 101 #define cSyncRestart 0x20 102 103 /* bit 6 (TSQD) */ 104 #define cSigQualityDetectOFF 0x00 105 #define cSigQualityDetectON 0x40 106 107 /* bit 7 (SQCM) */ 108 #define cSigQualityTriggered 0x00 109 #define cSigQualityContinous 0x80 110 111 /* Pause level and flywheel control byte (1w) */ 112 113 /* bits 0..5 (FEB0..FEB5) */ 114 #define cFlywheelMaxBlocksMask 0x3F 115 #define cFlywheelDefault 0x20 116 117 /* bits 6+7 (PL0/PL1) */ 118 #define cPauseLevel_11mV 0x00 119 #define cPauseLevel_17mV 0x40 120 #define cPauseLevel_27mV 0x80 121 #define cPauseLevel_43mV 0xC0 122 123 /* Pause time/oscillator frequency/quality detector control byte (1w) */ 124 125 /* bits 0..4 (SQS0..SQS4) */ 126 #define cQualityDetectSensMask 0x1F 127 #define cQualityDetectDefault 0x0F 128 129 /* bit 5 (SOSC) */ 130 #define cSelectOscFreqOFF 0x00 131 #define cSelectOscFreqON 0x20 132 133 /* bit 6+7 (PTF0/PTF1) */ 134 #define cOscFreq_4332kHz 0x00 135 #define cOscFreq_8664kHz 0x40 136 #define cOscFreq_12996kHz 0x80 137 #define cOscFreq_17328kHz 0xC0 138 139 /* ---------------------------------------------------------------------- */ 140 141 static bool block_from_buf(struct saa6588 *s, unsigned char *buf) 142 { 143 int i; 144 145 if (s->rd_index == s->wr_index) { 146 if (debug > 2) 147 dprintk(PREFIX "Read: buffer empty.\n"); 148 return false; 149 } 150 151 if (debug > 2) { 152 dprintk(PREFIX "Read: "); 153 for (i = s->rd_index; i < s->rd_index + 3; i++) 154 dprintk("0x%02x ", s->buffer[i]); 155 } 156 157 memcpy(buf, &s->buffer[s->rd_index], 3); 158 159 s->rd_index += 3; 160 if (s->rd_index >= s->buf_size) 161 s->rd_index = 0; 162 s->block_count--; 163 164 if (debug > 2) 165 dprintk("%d blocks total.\n", s->block_count); 166 167 return true; 168 } 169 170 static void read_from_buf(struct saa6588 *s, struct saa6588_command *a) 171 { 172 unsigned char __user *buf_ptr = a->buffer; 173 unsigned char buf[3]; 174 unsigned long flags; 175 unsigned int rd_blocks; 176 unsigned int i; 177 178 a->result = 0; 179 if (!a->buffer) 180 return; 181 182 while (!a->nonblocking && !s->data_available_for_read) { 183 int ret = wait_event_interruptible(s->read_queue, 184 s->data_available_for_read); 185 if (ret == -ERESTARTSYS) { 186 a->result = -EINTR; 187 return; 188 } 189 } 190 191 rd_blocks = a->block_count; 192 spin_lock_irqsave(&s->lock, flags); 193 if (rd_blocks > s->block_count) 194 rd_blocks = s->block_count; 195 spin_unlock_irqrestore(&s->lock, flags); 196 197 if (!rd_blocks) 198 return; 199 200 for (i = 0; i < rd_blocks; i++) { 201 bool got_block; 202 203 spin_lock_irqsave(&s->lock, flags); 204 got_block = block_from_buf(s, buf); 205 spin_unlock_irqrestore(&s->lock, flags); 206 if (!got_block) 207 break; 208 if (copy_to_user(buf_ptr, buf, 3)) { 209 a->result = -EFAULT; 210 return; 211 } 212 buf_ptr += 3; 213 a->result += 3; 214 } 215 spin_lock_irqsave(&s->lock, flags); 216 s->data_available_for_read = (s->block_count > 0); 217 spin_unlock_irqrestore(&s->lock, flags); 218 } 219 220 static void block_to_buf(struct saa6588 *s, unsigned char *blockbuf) 221 { 222 unsigned int i; 223 224 if (debug > 3) 225 dprintk(PREFIX "New block: "); 226 227 for (i = 0; i < 3; ++i) { 228 if (debug > 3) 229 dprintk("0x%02x ", blockbuf[i]); 230 s->buffer[s->wr_index] = blockbuf[i]; 231 s->wr_index++; 232 } 233 234 if (s->wr_index >= s->buf_size) 235 s->wr_index = 0; 236 237 if (s->wr_index == s->rd_index) { 238 s->rd_index += 3; 239 if (s->rd_index >= s->buf_size) 240 s->rd_index = 0; 241 } else 242 s->block_count++; 243 244 if (debug > 3) 245 dprintk("%d blocks total.\n", s->block_count); 246 } 247 248 static void saa6588_i2c_poll(struct saa6588 *s) 249 { 250 struct i2c_client *client = v4l2_get_subdevdata(&s->sd); 251 unsigned long flags; 252 unsigned char tmpbuf[6]; 253 unsigned char blocknum; 254 unsigned char tmp; 255 256 /* Although we only need 3 bytes, we have to read at least 6. 257 SAA6588 returns garbage otherwise. */ 258 if (6 != i2c_master_recv(client, &tmpbuf[0], 6)) { 259 if (debug > 1) 260 dprintk(PREFIX "read error!\n"); 261 return; 262 } 263 264 s->sync = tmpbuf[0] & 0x10; 265 if (!s->sync) 266 return; 267 blocknum = tmpbuf[0] >> 5; 268 if (blocknum == s->last_blocknum) { 269 if (debug > 3) 270 dprintk("Saw block %d again.\n", blocknum); 271 return; 272 } 273 274 s->last_blocknum = blocknum; 275 276 /* 277 Byte order according to v4l2 specification: 278 279 Byte 0: Least Significant Byte of RDS Block 280 Byte 1: Most Significant Byte of RDS Block 281 Byte 2 Bit 7: Error bit. Indicates that an uncorrectable error 282 occurred during reception of this block. 283 Bit 6: Corrected bit. Indicates that an error was 284 corrected for this data block. 285 Bits 5-3: Same as bits 0-2. 286 Bits 2-0: Block number. 287 288 SAA6588 byte order is Status-MSB-LSB, so we have to swap the 289 first and the last of the 3 bytes block. 290 */ 291 292 swap(tmpbuf[2], tmpbuf[0]); 293 294 /* Map 'Invalid block E' to 'Invalid Block' */ 295 if (blocknum == 6) 296 blocknum = V4L2_RDS_BLOCK_INVALID; 297 /* And if are not in mmbs mode, then 'Block E' is also mapped 298 to 'Invalid Block'. As far as I can tell MMBS is discontinued, 299 and if there is ever a need to support E blocks, then please 300 contact the linux-media mailinglist. */ 301 else if (!mmbs && blocknum == 5) 302 blocknum = V4L2_RDS_BLOCK_INVALID; 303 tmp = blocknum; 304 tmp |= blocknum << 3; /* Received offset == Offset Name (OK ?) */ 305 if ((tmpbuf[2] & 0x03) == 0x03) 306 tmp |= V4L2_RDS_BLOCK_ERROR; /* uncorrectable error */ 307 else if ((tmpbuf[2] & 0x03) != 0x00) 308 tmp |= V4L2_RDS_BLOCK_CORRECTED; /* corrected error */ 309 tmpbuf[2] = tmp; /* Is this enough ? Should we also check other bits ? */ 310 311 spin_lock_irqsave(&s->lock, flags); 312 block_to_buf(s, tmpbuf); 313 spin_unlock_irqrestore(&s->lock, flags); 314 s->data_available_for_read = 1; 315 wake_up_interruptible(&s->read_queue); 316 } 317 318 static void saa6588_work(struct work_struct *work) 319 { 320 struct saa6588 *s = container_of(work, struct saa6588, work.work); 321 322 saa6588_i2c_poll(s); 323 schedule_delayed_work(&s->work, msecs_to_jiffies(20)); 324 } 325 326 static void saa6588_configure(struct saa6588 *s) 327 { 328 struct i2c_client *client = v4l2_get_subdevdata(&s->sd); 329 unsigned char buf[3]; 330 int rc; 331 332 buf[0] = cSyncRestart; 333 if (mmbs) 334 buf[0] |= cProcessingModeRBDS; 335 336 buf[1] = cFlywheelDefault; 337 switch (plvl) { 338 case 0: 339 buf[1] |= cPauseLevel_11mV; 340 break; 341 case 1: 342 buf[1] |= cPauseLevel_17mV; 343 break; 344 case 2: 345 buf[1] |= cPauseLevel_27mV; 346 break; 347 case 3: 348 buf[1] |= cPauseLevel_43mV; 349 break; 350 default: /* nothing */ 351 break; 352 } 353 354 buf[2] = cQualityDetectDefault | cSelectOscFreqON; 355 356 switch (xtal) { 357 case 0: 358 buf[2] |= cOscFreq_4332kHz; 359 break; 360 case 1: 361 buf[2] |= cOscFreq_8664kHz; 362 break; 363 case 2: 364 buf[2] |= cOscFreq_12996kHz; 365 break; 366 case 3: 367 buf[2] |= cOscFreq_17328kHz; 368 break; 369 default: /* nothing */ 370 break; 371 } 372 373 dprintk(PREFIX "writing: 0w=0x%02x 1w=0x%02x 2w=0x%02x\n", 374 buf[0], buf[1], buf[2]); 375 376 rc = i2c_master_send(client, buf, 3); 377 if (rc != 3) 378 printk(PREFIX "i2c i/o error: rc == %d (should be 3)\n", rc); 379 } 380 381 /* ---------------------------------------------------------------------- */ 382 383 static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) 384 { 385 struct saa6588 *s = to_saa6588(sd); 386 struct saa6588_command *a = arg; 387 388 switch (cmd) { 389 /* --- close() for /dev/radio --- */ 390 case SAA6588_CMD_CLOSE: 391 s->data_available_for_read = 1; 392 wake_up_interruptible(&s->read_queue); 393 s->data_available_for_read = 0; 394 a->result = 0; 395 break; 396 /* --- read() for /dev/radio --- */ 397 case SAA6588_CMD_READ: 398 read_from_buf(s, a); 399 break; 400 /* --- poll() for /dev/radio --- */ 401 case SAA6588_CMD_POLL: 402 a->poll_mask = 0; 403 if (s->data_available_for_read) 404 a->poll_mask |= EPOLLIN | EPOLLRDNORM; 405 poll_wait(a->instance, &s->read_queue, a->event_list); 406 break; 407 408 default: 409 /* nothing */ 410 return -ENOIOCTLCMD; 411 } 412 return 0; 413 } 414 415 static int saa6588_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) 416 { 417 struct saa6588 *s = to_saa6588(sd); 418 419 vt->capability |= V4L2_TUNER_CAP_RDS | V4L2_TUNER_CAP_RDS_BLOCK_IO; 420 if (s->sync) 421 vt->rxsubchans |= V4L2_TUNER_SUB_RDS; 422 return 0; 423 } 424 425 static int saa6588_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) 426 { 427 struct saa6588 *s = to_saa6588(sd); 428 429 saa6588_configure(s); 430 return 0; 431 } 432 433 /* ----------------------------------------------------------------------- */ 434 435 static const struct v4l2_subdev_core_ops saa6588_core_ops = { 436 .ioctl = saa6588_ioctl, 437 }; 438 439 static const struct v4l2_subdev_tuner_ops saa6588_tuner_ops = { 440 .g_tuner = saa6588_g_tuner, 441 .s_tuner = saa6588_s_tuner, 442 }; 443 444 static const struct v4l2_subdev_ops saa6588_ops = { 445 .core = &saa6588_core_ops, 446 .tuner = &saa6588_tuner_ops, 447 }; 448 449 /* ---------------------------------------------------------------------- */ 450 451 static int saa6588_probe(struct i2c_client *client, 452 const struct i2c_device_id *id) 453 { 454 struct saa6588 *s; 455 struct v4l2_subdev *sd; 456 457 v4l_info(client, "saa6588 found @ 0x%x (%s)\n", 458 client->addr << 1, client->adapter->name); 459 460 s = devm_kzalloc(&client->dev, sizeof(*s), GFP_KERNEL); 461 if (s == NULL) 462 return -ENOMEM; 463 464 s->buf_size = bufblocks * 3; 465 466 s->buffer = devm_kzalloc(&client->dev, s->buf_size, GFP_KERNEL); 467 if (s->buffer == NULL) 468 return -ENOMEM; 469 sd = &s->sd; 470 v4l2_i2c_subdev_init(sd, client, &saa6588_ops); 471 spin_lock_init(&s->lock); 472 s->block_count = 0; 473 s->wr_index = 0; 474 s->rd_index = 0; 475 s->last_blocknum = 0xff; 476 init_waitqueue_head(&s->read_queue); 477 s->data_available_for_read = 0; 478 479 saa6588_configure(s); 480 481 /* start polling via eventd */ 482 INIT_DELAYED_WORK(&s->work, saa6588_work); 483 schedule_delayed_work(&s->work, 0); 484 return 0; 485 } 486 487 static int saa6588_remove(struct i2c_client *client) 488 { 489 struct v4l2_subdev *sd = i2c_get_clientdata(client); 490 struct saa6588 *s = to_saa6588(sd); 491 492 v4l2_device_unregister_subdev(sd); 493 494 cancel_delayed_work_sync(&s->work); 495 496 return 0; 497 } 498 499 /* ----------------------------------------------------------------------- */ 500 501 static const struct i2c_device_id saa6588_id[] = { 502 { "saa6588", 0 }, 503 { } 504 }; 505 MODULE_DEVICE_TABLE(i2c, saa6588_id); 506 507 static struct i2c_driver saa6588_driver = { 508 .driver = { 509 .name = "saa6588", 510 }, 511 .probe = saa6588_probe, 512 .remove = saa6588_remove, 513 .id_table = saa6588_id, 514 }; 515 516 module_i2c_driver(saa6588_driver); 517