1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (c) 2013 Intel Corporation. All Rights Reserved. 4 * 5 * Adapted from the atomisp-ov5693 driver, with contributions from: 6 * 7 * Daniel Scally 8 * Jean-Michel Hautbois 9 * Fabian Wuthrich 10 * Tsuchiya Yuto 11 * Jordan Hand 12 * Jake Day 13 */ 14 15 #include <asm/unaligned.h> 16 #include <linux/acpi.h> 17 #include <linux/clk.h> 18 #include <linux/delay.h> 19 #include <linux/device.h> 20 #include <linux/i2c.h> 21 #include <linux/module.h> 22 #include <linux/pm_runtime.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/slab.h> 25 #include <linux/types.h> 26 #include <media/v4l2-ctrls.h> 27 #include <media/v4l2-device.h> 28 #include <media/v4l2-fwnode.h> 29 30 #define OV5693_REG_8BIT(n) ((1 << 16) | (n)) 31 #define OV5693_REG_16BIT(n) ((2 << 16) | (n)) 32 #define OV5693_REG_24BIT(n) ((3 << 16) | (n)) 33 #define OV5693_REG_SIZE_SHIFT 16 34 #define OV5693_REG_ADDR_MASK 0xffff 35 36 /* System Control */ 37 #define OV5693_SW_RESET_REG OV5693_REG_8BIT(0x0103) 38 #define OV5693_SW_STREAM_REG OV5693_REG_8BIT(0x0100) 39 #define OV5693_START_STREAMING 0x01 40 #define OV5693_STOP_STREAMING 0x00 41 #define OV5693_SW_RESET 0x01 42 43 #define OV5693_REG_CHIP_ID OV5693_REG_16BIT(0x300a) 44 /* Yes, this is right. The datasheet for the OV5693 gives its ID as 0x5690 */ 45 #define OV5693_CHIP_ID 0x5690 46 47 /* Exposure */ 48 #define OV5693_EXPOSURE_CTRL_REG OV5693_REG_24BIT(0x3500) 49 #define OV5693_EXPOSURE_CTRL_MASK GENMASK(19, 4) 50 #define OV5693_INTEGRATION_TIME_MARGIN 8 51 #define OV5693_EXPOSURE_MIN 1 52 #define OV5693_EXPOSURE_STEP 1 53 54 /* Analogue Gain */ 55 #define OV5693_GAIN_CTRL_REG OV5693_REG_16BIT(0x350a) 56 #define OV5693_GAIN_CTRL_MASK GENMASK(10, 4) 57 #define OV5693_GAIN_MIN 1 58 #define OV5693_GAIN_MAX 127 59 #define OV5693_GAIN_DEF 8 60 #define OV5693_GAIN_STEP 1 61 62 /* Digital Gain */ 63 #define OV5693_MWB_RED_GAIN_REG OV5693_REG_16BIT(0x3400) 64 #define OV5693_MWB_GREEN_GAIN_REG OV5693_REG_16BIT(0x3402) 65 #define OV5693_MWB_BLUE_GAIN_REG OV5693_REG_16BIT(0x3404) 66 #define OV5693_MWB_GAIN_MASK GENMASK(11, 0) 67 #define OV5693_MWB_GAIN_MAX 0x0fff 68 #define OV5693_DIGITAL_GAIN_MIN 1 69 #define OV5693_DIGITAL_GAIN_MAX 4095 70 #define OV5693_DIGITAL_GAIN_DEF 1024 71 #define OV5693_DIGITAL_GAIN_STEP 1 72 73 /* Timing and Format */ 74 #define OV5693_CROP_START_X_REG OV5693_REG_16BIT(0x3800) 75 #define OV5693_CROP_START_Y_REG OV5693_REG_16BIT(0x3802) 76 #define OV5693_CROP_END_X_REG OV5693_REG_16BIT(0x3804) 77 #define OV5693_CROP_END_Y_REG OV5693_REG_16BIT(0x3806) 78 #define OV5693_OUTPUT_SIZE_X_REG OV5693_REG_16BIT(0x3808) 79 #define OV5693_OUTPUT_SIZE_Y_REG OV5693_REG_16BIT(0x380a) 80 81 #define OV5693_TIMING_HTS_REG OV5693_REG_16BIT(0x380c) 82 #define OV5693_FIXED_PPL 2688U 83 #define OV5693_TIMING_VTS_REG OV5693_REG_16BIT(0x380e) 84 #define OV5693_TIMING_MAX_VTS 0xffff 85 #define OV5693_TIMING_MIN_VTS 0x04 86 87 #define OV5693_OFFSET_START_X_REG OV5693_REG_16BIT(0x3810) 88 #define OV5693_OFFSET_START_Y_REG OV5693_REG_16BIT(0x3812) 89 90 #define OV5693_SUB_INC_X_REG OV5693_REG_8BIT(0x3814) 91 #define OV5693_SUB_INC_Y_REG OV5693_REG_8BIT(0x3815) 92 93 #define OV5693_FORMAT1_REG OV5693_REG_8BIT(0x3820) 94 #define OV5693_FORMAT1_FLIP_VERT_ISP_EN BIT(6) 95 #define OV5693_FORMAT1_FLIP_VERT_SENSOR_EN BIT(1) 96 #define OV5693_FORMAT1_VBIN_EN BIT(0) 97 #define OV5693_FORMAT2_REG OV5693_REG_8BIT(0x3821) 98 #define OV5693_FORMAT2_HDR_EN BIT(7) 99 #define OV5693_FORMAT2_FLIP_HORZ_ISP_EN BIT(2) 100 #define OV5693_FORMAT2_FLIP_HORZ_SENSOR_EN BIT(1) 101 #define OV5693_FORMAT2_HBIN_EN BIT(0) 102 103 #define OV5693_ISP_CTRL2_REG OV5693_REG_8BIT(0x5002) 104 #define OV5693_ISP_SCALE_ENABLE BIT(7) 105 106 /* Pixel Array */ 107 #define OV5693_NATIVE_WIDTH 2624 108 #define OV5693_NATIVE_HEIGHT 1956 109 #define OV5693_NATIVE_START_LEFT 0 110 #define OV5693_NATIVE_START_TOP 0 111 #define OV5693_ACTIVE_WIDTH 2592 112 #define OV5693_ACTIVE_HEIGHT 1944 113 #define OV5693_ACTIVE_START_LEFT 16 114 #define OV5693_ACTIVE_START_TOP 6 115 #define OV5693_MIN_CROP_WIDTH 2 116 #define OV5693_MIN_CROP_HEIGHT 2 117 118 /* Test Pattern */ 119 #define OV5693_TEST_PATTERN_REG OV5693_REG_8BIT(0x5e00) 120 #define OV5693_TEST_PATTERN_ENABLE BIT(7) 121 #define OV5693_TEST_PATTERN_ROLLING BIT(6) 122 #define OV5693_TEST_PATTERN_RANDOM 0x01 123 #define OV5693_TEST_PATTERN_BARS 0x00 124 125 /* System Frequencies */ 126 #define OV5693_XVCLK_FREQ 19200000 127 #define OV5693_LINK_FREQ_419_2MHZ 419200000 128 #define OV5693_PIXEL_RATE 167680000 129 130 #define to_ov5693_sensor(x) container_of(x, struct ov5693_device, sd) 131 132 static const char * const ov5693_supply_names[] = { 133 "avdd", /* Analog power */ 134 "dovdd", /* Digital I/O power */ 135 "dvdd", /* Digital circuit power */ 136 }; 137 138 #define OV5693_NUM_SUPPLIES ARRAY_SIZE(ov5693_supply_names) 139 140 struct ov5693_reg { 141 u32 reg; 142 u8 val; 143 }; 144 145 struct ov5693_reg_list { 146 u32 num_regs; 147 const struct ov5693_reg *regs; 148 }; 149 150 struct ov5693_device { 151 struct i2c_client *client; 152 struct device *dev; 153 154 /* Protect against concurrent changes to controls */ 155 struct mutex lock; 156 157 struct gpio_desc *reset; 158 struct gpio_desc *powerdown; 159 struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES]; 160 struct clk *xvclk; 161 162 struct ov5693_mode { 163 struct v4l2_rect crop; 164 struct v4l2_mbus_framefmt format; 165 bool binning_x; 166 bool binning_y; 167 unsigned int inc_x_odd; 168 unsigned int inc_y_odd; 169 unsigned int vts; 170 } mode; 171 bool streaming; 172 173 struct v4l2_subdev sd; 174 struct media_pad pad; 175 176 struct ov5693_v4l2_ctrls { 177 struct v4l2_ctrl_handler handler; 178 struct v4l2_ctrl *link_freq; 179 struct v4l2_ctrl *pixel_rate; 180 struct v4l2_ctrl *exposure; 181 struct v4l2_ctrl *analogue_gain; 182 struct v4l2_ctrl *digital_gain; 183 struct v4l2_ctrl *hflip; 184 struct v4l2_ctrl *vflip; 185 struct v4l2_ctrl *hblank; 186 struct v4l2_ctrl *vblank; 187 struct v4l2_ctrl *test_pattern; 188 } ctrls; 189 }; 190 191 static const struct ov5693_reg ov5693_global_regs[] = { 192 {OV5693_REG_8BIT(0x3016), 0xf0}, 193 {OV5693_REG_8BIT(0x3017), 0xf0}, 194 {OV5693_REG_8BIT(0x3018), 0xf0}, 195 {OV5693_REG_8BIT(0x3022), 0x01}, 196 {OV5693_REG_8BIT(0x3028), 0x44}, 197 {OV5693_REG_8BIT(0x3098), 0x02}, 198 {OV5693_REG_8BIT(0x3099), 0x19}, 199 {OV5693_REG_8BIT(0x309a), 0x02}, 200 {OV5693_REG_8BIT(0x309b), 0x01}, 201 {OV5693_REG_8BIT(0x309c), 0x00}, 202 {OV5693_REG_8BIT(0x30a0), 0xd2}, 203 {OV5693_REG_8BIT(0x30a2), 0x01}, 204 {OV5693_REG_8BIT(0x30b2), 0x00}, 205 {OV5693_REG_8BIT(0x30b3), 0x83}, 206 {OV5693_REG_8BIT(0x30b4), 0x03}, 207 {OV5693_REG_8BIT(0x30b5), 0x04}, 208 {OV5693_REG_8BIT(0x30b6), 0x01}, 209 {OV5693_REG_8BIT(0x3080), 0x01}, 210 {OV5693_REG_8BIT(0x3104), 0x21}, 211 {OV5693_REG_8BIT(0x3106), 0x00}, 212 {OV5693_REG_8BIT(0x3406), 0x01}, 213 {OV5693_REG_8BIT(0x3503), 0x07}, 214 {OV5693_REG_8BIT(0x350b), 0x40}, 215 {OV5693_REG_8BIT(0x3601), 0x0a}, 216 {OV5693_REG_8BIT(0x3602), 0x38}, 217 {OV5693_REG_8BIT(0x3612), 0x80}, 218 {OV5693_REG_8BIT(0x3620), 0x54}, 219 {OV5693_REG_8BIT(0x3621), 0xc7}, 220 {OV5693_REG_8BIT(0x3622), 0x0f}, 221 {OV5693_REG_8BIT(0x3625), 0x10}, 222 {OV5693_REG_8BIT(0x3630), 0x55}, 223 {OV5693_REG_8BIT(0x3631), 0xf4}, 224 {OV5693_REG_8BIT(0x3632), 0x00}, 225 {OV5693_REG_8BIT(0x3633), 0x34}, 226 {OV5693_REG_8BIT(0x3634), 0x02}, 227 {OV5693_REG_8BIT(0x364d), 0x0d}, 228 {OV5693_REG_8BIT(0x364f), 0xdd}, 229 {OV5693_REG_8BIT(0x3660), 0x04}, 230 {OV5693_REG_8BIT(0x3662), 0x10}, 231 {OV5693_REG_8BIT(0x3663), 0xf1}, 232 {OV5693_REG_8BIT(0x3665), 0x00}, 233 {OV5693_REG_8BIT(0x3666), 0x20}, 234 {OV5693_REG_8BIT(0x3667), 0x00}, 235 {OV5693_REG_8BIT(0x366a), 0x80}, 236 {OV5693_REG_8BIT(0x3680), 0xe0}, 237 {OV5693_REG_8BIT(0x3681), 0x00}, 238 {OV5693_REG_8BIT(0x3700), 0x42}, 239 {OV5693_REG_8BIT(0x3701), 0x14}, 240 {OV5693_REG_8BIT(0x3702), 0xa0}, 241 {OV5693_REG_8BIT(0x3703), 0xd8}, 242 {OV5693_REG_8BIT(0x3704), 0x78}, 243 {OV5693_REG_8BIT(0x3705), 0x02}, 244 {OV5693_REG_8BIT(0x370a), 0x00}, 245 {OV5693_REG_8BIT(0x370b), 0x20}, 246 {OV5693_REG_8BIT(0x370c), 0x0c}, 247 {OV5693_REG_8BIT(0x370d), 0x11}, 248 {OV5693_REG_8BIT(0x370e), 0x00}, 249 {OV5693_REG_8BIT(0x370f), 0x40}, 250 {OV5693_REG_8BIT(0x3710), 0x00}, 251 {OV5693_REG_8BIT(0x371a), 0x1c}, 252 {OV5693_REG_8BIT(0x371b), 0x05}, 253 {OV5693_REG_8BIT(0x371c), 0x01}, 254 {OV5693_REG_8BIT(0x371e), 0xa1}, 255 {OV5693_REG_8BIT(0x371f), 0x0c}, 256 {OV5693_REG_8BIT(0x3721), 0x00}, 257 {OV5693_REG_8BIT(0x3724), 0x10}, 258 {OV5693_REG_8BIT(0x3726), 0x00}, 259 {OV5693_REG_8BIT(0x372a), 0x01}, 260 {OV5693_REG_8BIT(0x3730), 0x10}, 261 {OV5693_REG_8BIT(0x3738), 0x22}, 262 {OV5693_REG_8BIT(0x3739), 0xe5}, 263 {OV5693_REG_8BIT(0x373a), 0x50}, 264 {OV5693_REG_8BIT(0x373b), 0x02}, 265 {OV5693_REG_8BIT(0x373c), 0x41}, 266 {OV5693_REG_8BIT(0x373f), 0x02}, 267 {OV5693_REG_8BIT(0x3740), 0x42}, 268 {OV5693_REG_8BIT(0x3741), 0x02}, 269 {OV5693_REG_8BIT(0x3742), 0x18}, 270 {OV5693_REG_8BIT(0x3743), 0x01}, 271 {OV5693_REG_8BIT(0x3744), 0x02}, 272 {OV5693_REG_8BIT(0x3747), 0x10}, 273 {OV5693_REG_8BIT(0x374c), 0x04}, 274 {OV5693_REG_8BIT(0x3751), 0xf0}, 275 {OV5693_REG_8BIT(0x3752), 0x00}, 276 {OV5693_REG_8BIT(0x3753), 0x00}, 277 {OV5693_REG_8BIT(0x3754), 0xc0}, 278 {OV5693_REG_8BIT(0x3755), 0x00}, 279 {OV5693_REG_8BIT(0x3756), 0x1a}, 280 {OV5693_REG_8BIT(0x3758), 0x00}, 281 {OV5693_REG_8BIT(0x3759), 0x0f}, 282 {OV5693_REG_8BIT(0x376b), 0x44}, 283 {OV5693_REG_8BIT(0x375c), 0x04}, 284 {OV5693_REG_8BIT(0x3774), 0x10}, 285 {OV5693_REG_8BIT(0x3776), 0x00}, 286 {OV5693_REG_8BIT(0x377f), 0x08}, 287 {OV5693_REG_8BIT(0x3780), 0x22}, 288 {OV5693_REG_8BIT(0x3781), 0x0c}, 289 {OV5693_REG_8BIT(0x3784), 0x2c}, 290 {OV5693_REG_8BIT(0x3785), 0x1e}, 291 {OV5693_REG_8BIT(0x378f), 0xf5}, 292 {OV5693_REG_8BIT(0x3791), 0xb0}, 293 {OV5693_REG_8BIT(0x3795), 0x00}, 294 {OV5693_REG_8BIT(0x3796), 0x64}, 295 {OV5693_REG_8BIT(0x3797), 0x11}, 296 {OV5693_REG_8BIT(0x3798), 0x30}, 297 {OV5693_REG_8BIT(0x3799), 0x41}, 298 {OV5693_REG_8BIT(0x379a), 0x07}, 299 {OV5693_REG_8BIT(0x379b), 0xb0}, 300 {OV5693_REG_8BIT(0x379c), 0x0c}, 301 {OV5693_REG_8BIT(0x3a04), 0x06}, 302 {OV5693_REG_8BIT(0x3a05), 0x14}, 303 {OV5693_REG_8BIT(0x3e07), 0x20}, 304 {OV5693_REG_8BIT(0x4000), 0x08}, 305 {OV5693_REG_8BIT(0x4001), 0x04}, 306 {OV5693_REG_8BIT(0x4004), 0x08}, 307 {OV5693_REG_8BIT(0x4006), 0x20}, 308 {OV5693_REG_8BIT(0x4008), 0x24}, 309 {OV5693_REG_8BIT(0x4009), 0x10}, 310 {OV5693_REG_8BIT(0x4058), 0x00}, 311 {OV5693_REG_8BIT(0x4101), 0xb2}, 312 {OV5693_REG_8BIT(0x4307), 0x31}, 313 {OV5693_REG_8BIT(0x4511), 0x05}, 314 {OV5693_REG_8BIT(0x4512), 0x01}, 315 {OV5693_REG_8BIT(0x481f), 0x30}, 316 {OV5693_REG_8BIT(0x4826), 0x2c}, 317 {OV5693_REG_8BIT(0x4d02), 0xfd}, 318 {OV5693_REG_8BIT(0x4d03), 0xf5}, 319 {OV5693_REG_8BIT(0x4d04), 0x0c}, 320 {OV5693_REG_8BIT(0x4d05), 0xcc}, 321 {OV5693_REG_8BIT(0x4837), 0x0a}, 322 {OV5693_REG_8BIT(0x5003), 0x20}, 323 {OV5693_REG_8BIT(0x5013), 0x00}, 324 {OV5693_REG_8BIT(0x5842), 0x01}, 325 {OV5693_REG_8BIT(0x5843), 0x2b}, 326 {OV5693_REG_8BIT(0x5844), 0x01}, 327 {OV5693_REG_8BIT(0x5845), 0x92}, 328 {OV5693_REG_8BIT(0x5846), 0x01}, 329 {OV5693_REG_8BIT(0x5847), 0x8f}, 330 {OV5693_REG_8BIT(0x5848), 0x01}, 331 {OV5693_REG_8BIT(0x5849), 0x0c}, 332 {OV5693_REG_8BIT(0x5e10), 0x0c}, 333 {OV5693_REG_8BIT(0x3820), 0x00}, 334 {OV5693_REG_8BIT(0x3821), 0x1e}, 335 {OV5693_REG_8BIT(0x5041), 0x14} 336 }; 337 338 static const struct ov5693_reg_list ov5693_global_setting = { 339 .num_regs = ARRAY_SIZE(ov5693_global_regs), 340 .regs = ov5693_global_regs, 341 }; 342 343 static const struct v4l2_rect ov5693_default_crop = { 344 .left = OV5693_ACTIVE_START_LEFT, 345 .top = OV5693_ACTIVE_START_TOP, 346 .width = OV5693_ACTIVE_WIDTH, 347 .height = OV5693_ACTIVE_HEIGHT, 348 }; 349 350 static const struct v4l2_mbus_framefmt ov5693_default_fmt = { 351 .width = OV5693_ACTIVE_WIDTH, 352 .height = OV5693_ACTIVE_HEIGHT, 353 .code = MEDIA_BUS_FMT_SBGGR10_1X10, 354 }; 355 356 static const s64 link_freq_menu_items[] = { 357 OV5693_LINK_FREQ_419_2MHZ 358 }; 359 360 static const char * const ov5693_test_pattern_menu[] = { 361 "Disabled", 362 "Random Data", 363 "Colour Bars", 364 "Colour Bars with Rolling Bar" 365 }; 366 367 static const u8 ov5693_test_pattern_bits[] = { 368 0, 369 OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_RANDOM, 370 OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_BARS, 371 OV5693_TEST_PATTERN_ENABLE | OV5693_TEST_PATTERN_BARS | 372 OV5693_TEST_PATTERN_ROLLING, 373 }; 374 375 /* I2C I/O Operations */ 376 377 static int ov5693_read_reg(struct ov5693_device *ov5693, u32 addr, u32 *value) 378 { 379 struct i2c_client *client = ov5693->client; 380 __be16 reg; 381 u8 val[4]; 382 struct i2c_msg msg[] = { 383 { 384 .addr = client->addr, 385 .flags = 0, 386 .len = 2, 387 .buf = (u8 *)®, 388 }, 389 { 390 .addr = client->addr, 391 .flags = I2C_M_RD, 392 .buf = (u8 *)&val, 393 }, 394 }; 395 unsigned int len = ((addr >> OV5693_REG_SIZE_SHIFT) & 3); 396 unsigned int i; 397 int ret; 398 399 reg = cpu_to_be16(addr & OV5693_REG_ADDR_MASK); 400 401 msg[1].len = len; 402 403 ret = i2c_transfer(client->adapter, msg, 2); 404 if (ret < 0) 405 return dev_err_probe(&client->dev, ret, 406 "Failed to read register 0x%04x: %d\n", 407 addr & OV5693_REG_ADDR_MASK, ret); 408 409 *value = 0; 410 for (i = 0; i < len; ++i) { 411 *value <<= 8; 412 *value |= val[i]; 413 } 414 415 return 0; 416 } 417 418 static void ov5693_write_reg(struct ov5693_device *ov5693, u32 addr, u32 value, 419 int *error) 420 { 421 struct i2c_client *client = ov5693->client; 422 struct { 423 __be16 reg; 424 u8 val[4]; 425 } __packed buf; 426 struct i2c_msg msg = { 427 .addr = client->addr, 428 .buf = (u8 *)&buf, 429 }; 430 unsigned int len = ((addr >> OV5693_REG_SIZE_SHIFT) & 3); 431 unsigned int i; 432 int ret; 433 434 if (*error < 0) 435 return; 436 437 buf.reg = cpu_to_be16(addr & OV5693_REG_ADDR_MASK); 438 for (i = 0; i < len; ++i) { 439 buf.val[len - i - 1] = value & 0xff; 440 value >>= 8; 441 } 442 443 msg.len = len + 2; 444 445 ret = i2c_transfer(client->adapter, &msg, 1); 446 if (ret < 0) { 447 dev_err(&client->dev, "Failed to write register 0x%04x: %d\n", 448 addr & OV5693_REG_ADDR_MASK, ret); 449 *error = ret; 450 } 451 } 452 453 static int ov5693_write_reg_array(struct ov5693_device *ov5693, 454 const struct ov5693_reg_list *reglist) 455 { 456 unsigned int i; 457 int ret = 0; 458 459 for (i = 0; i < reglist->num_regs; i++) 460 ov5693_write_reg(ov5693, reglist->regs[i].reg, 461 reglist->regs[i].val, &ret); 462 463 return ret; 464 } 465 466 static int ov5693_update_bits(struct ov5693_device *ov5693, u32 address, 467 u32 mask, u32 bits) 468 { 469 u32 value = 0; 470 int ret; 471 472 ret = ov5693_read_reg(ov5693, address, &value); 473 if (ret) 474 return ret; 475 476 value &= ~mask; 477 value |= bits; 478 479 ov5693_write_reg(ov5693, address, value, &ret); 480 481 return ret; 482 } 483 484 /* V4L2 Controls Functions */ 485 486 static int ov5693_flip_vert_configure(struct ov5693_device *ov5693, 487 bool enable) 488 { 489 u8 bits = OV5693_FORMAT1_FLIP_VERT_ISP_EN | 490 OV5693_FORMAT1_FLIP_VERT_SENSOR_EN; 491 int ret; 492 493 ret = ov5693_update_bits(ov5693, OV5693_FORMAT1_REG, bits, 494 enable ? bits : 0); 495 if (ret) 496 return ret; 497 498 return 0; 499 } 500 501 static int ov5693_flip_horz_configure(struct ov5693_device *ov5693, 502 bool enable) 503 { 504 u8 bits = OV5693_FORMAT2_FLIP_HORZ_ISP_EN | 505 OV5693_FORMAT2_FLIP_HORZ_SENSOR_EN; 506 int ret; 507 508 ret = ov5693_update_bits(ov5693, OV5693_FORMAT2_REG, bits, 509 enable ? bits : 0); 510 if (ret) 511 return ret; 512 513 return 0; 514 } 515 516 static int ov5693_get_exposure(struct ov5693_device *ov5693, s32 *value) 517 { 518 u32 exposure; 519 int ret; 520 521 ret = ov5693_read_reg(ov5693, OV5693_EXPOSURE_CTRL_REG, &exposure); 522 if (ret) 523 return ret; 524 525 /* The lowest 4 bits are unsupported fractional bits */ 526 *value = exposure >> 4; 527 528 return 0; 529 } 530 531 static int ov5693_exposure_configure(struct ov5693_device *ov5693, 532 u32 exposure) 533 { 534 int ret = 0; 535 536 exposure = (exposure << 4) & OV5693_EXPOSURE_CTRL_MASK; 537 538 ov5693_write_reg(ov5693, OV5693_EXPOSURE_CTRL_REG, exposure, &ret); 539 540 return ret; 541 } 542 543 static int ov5693_get_gain(struct ov5693_device *ov5693, u32 *gain) 544 { 545 u32 value; 546 int ret; 547 548 ret = ov5693_read_reg(ov5693, OV5693_GAIN_CTRL_REG, &value); 549 if (ret) 550 return ret; 551 552 /* As with exposure, the lowest 4 bits are fractional bits. */ 553 *gain = value >> 4; 554 555 return ret; 556 } 557 558 static int ov5693_digital_gain_configure(struct ov5693_device *ov5693, 559 u32 gain) 560 { 561 int ret = 0; 562 563 gain &= OV5693_MWB_GAIN_MASK; 564 565 ov5693_write_reg(ov5693, OV5693_MWB_RED_GAIN_REG, gain, &ret); 566 ov5693_write_reg(ov5693, OV5693_MWB_GREEN_GAIN_REG, gain, &ret); 567 ov5693_write_reg(ov5693, OV5693_MWB_BLUE_GAIN_REG, gain, &ret); 568 569 return ret; 570 } 571 572 static int ov5693_analog_gain_configure(struct ov5693_device *ov5693, u32 gain) 573 { 574 int ret = 0; 575 576 gain = (gain << 4) & OV5693_GAIN_CTRL_MASK; 577 578 ov5693_write_reg(ov5693, OV5693_GAIN_CTRL_REG, gain, &ret); 579 580 return ret; 581 } 582 583 static int ov5693_vts_configure(struct ov5693_device *ov5693, u32 vblank) 584 { 585 u16 vts = ov5693->mode.format.height + vblank; 586 int ret = 0; 587 588 ov5693_write_reg(ov5693, OV5693_TIMING_VTS_REG, vts, &ret); 589 590 return ret; 591 } 592 593 static int ov5693_test_pattern_configure(struct ov5693_device *ov5693, u32 idx) 594 { 595 int ret = 0; 596 597 ov5693_write_reg(ov5693, OV5693_TEST_PATTERN_REG, 598 ov5693_test_pattern_bits[idx], &ret); 599 600 return ret; 601 } 602 603 static int ov5693_s_ctrl(struct v4l2_ctrl *ctrl) 604 { 605 struct ov5693_device *ov5693 = 606 container_of(ctrl->handler, struct ov5693_device, ctrls.handler); 607 int ret = 0; 608 609 /* If VBLANK is altered we need to update exposure to compensate */ 610 if (ctrl->id == V4L2_CID_VBLANK) { 611 int exposure_max; 612 613 exposure_max = ov5693->mode.format.height + ctrl->val - 614 OV5693_INTEGRATION_TIME_MARGIN; 615 __v4l2_ctrl_modify_range(ov5693->ctrls.exposure, 616 ov5693->ctrls.exposure->minimum, 617 exposure_max, 618 ov5693->ctrls.exposure->step, 619 min(ov5693->ctrls.exposure->val, 620 exposure_max)); 621 } 622 623 /* Only apply changes to the controls if the device is powered up */ 624 if (!pm_runtime_get_if_in_use(ov5693->dev)) 625 return 0; 626 627 switch (ctrl->id) { 628 case V4L2_CID_EXPOSURE: 629 ret = ov5693_exposure_configure(ov5693, ctrl->val); 630 break; 631 case V4L2_CID_ANALOGUE_GAIN: 632 ret = ov5693_analog_gain_configure(ov5693, ctrl->val); 633 break; 634 case V4L2_CID_DIGITAL_GAIN: 635 ret = ov5693_digital_gain_configure(ov5693, ctrl->val); 636 break; 637 case V4L2_CID_HFLIP: 638 ret = ov5693_flip_horz_configure(ov5693, !!ctrl->val); 639 break; 640 case V4L2_CID_VFLIP: 641 ret = ov5693_flip_vert_configure(ov5693, !!ctrl->val); 642 break; 643 case V4L2_CID_VBLANK: 644 ret = ov5693_vts_configure(ov5693, ctrl->val); 645 break; 646 case V4L2_CID_TEST_PATTERN: 647 ret = ov5693_test_pattern_configure(ov5693, ctrl->val); 648 break; 649 default: 650 ret = -EINVAL; 651 } 652 653 pm_runtime_put(ov5693->dev); 654 655 return ret; 656 } 657 658 static int ov5693_g_volatile_ctrl(struct v4l2_ctrl *ctrl) 659 { 660 struct ov5693_device *ov5693 = container_of(ctrl->handler, 661 struct ov5693_device, 662 ctrls.handler); 663 664 switch (ctrl->id) { 665 case V4L2_CID_EXPOSURE_ABSOLUTE: 666 return ov5693_get_exposure(ov5693, &ctrl->val); 667 case V4L2_CID_AUTOGAIN: 668 return ov5693_get_gain(ov5693, &ctrl->val); 669 default: 670 return -EINVAL; 671 } 672 } 673 674 static const struct v4l2_ctrl_ops ov5693_ctrl_ops = { 675 .s_ctrl = ov5693_s_ctrl, 676 .g_volatile_ctrl = ov5693_g_volatile_ctrl 677 }; 678 679 /* System Control Functions */ 680 681 static int ov5693_mode_configure(struct ov5693_device *ov5693) 682 { 683 const struct ov5693_mode *mode = &ov5693->mode; 684 int ret = 0; 685 686 /* Crop Start X */ 687 ov5693_write_reg(ov5693, OV5693_CROP_START_X_REG, mode->crop.left, 688 &ret); 689 690 /* Offset X */ 691 ov5693_write_reg(ov5693, OV5693_OFFSET_START_X_REG, 0, &ret); 692 693 /* Output Size X */ 694 ov5693_write_reg(ov5693, OV5693_OUTPUT_SIZE_X_REG, mode->format.width, 695 &ret); 696 697 /* Crop End X */ 698 ov5693_write_reg(ov5693, OV5693_CROP_END_X_REG, 699 mode->crop.left + mode->crop.width, &ret); 700 701 /* Horizontal Total Size */ 702 ov5693_write_reg(ov5693, OV5693_TIMING_HTS_REG, OV5693_FIXED_PPL, 703 &ret); 704 705 /* Crop Start Y */ 706 ov5693_write_reg(ov5693, OV5693_CROP_START_Y_REG, mode->crop.top, 707 &ret); 708 709 /* Offset Y */ 710 ov5693_write_reg(ov5693, OV5693_OFFSET_START_Y_REG, 0, &ret); 711 712 /* Output Size Y */ 713 ov5693_write_reg(ov5693, OV5693_OUTPUT_SIZE_Y_REG, mode->format.height, 714 &ret); 715 716 /* Crop End Y */ 717 ov5693_write_reg(ov5693, OV5693_CROP_END_Y_REG, 718 mode->crop.top + mode->crop.height, &ret); 719 720 /* Subsample X increase */ 721 ov5693_write_reg(ov5693, OV5693_SUB_INC_X_REG, 722 ((mode->inc_x_odd << 4) & 0xf0) | 0x01, &ret); 723 /* Subsample Y increase */ 724 ov5693_write_reg(ov5693, OV5693_SUB_INC_Y_REG, 725 ((mode->inc_y_odd << 4) & 0xf0) | 0x01, &ret); 726 727 if (ret) 728 return ret; 729 730 /* Binning */ 731 ret = ov5693_update_bits(ov5693, OV5693_FORMAT1_REG, 732 OV5693_FORMAT1_VBIN_EN, 733 mode->binning_y ? OV5693_FORMAT1_VBIN_EN : 0); 734 if (ret) 735 return ret; 736 737 ret = ov5693_update_bits(ov5693, OV5693_FORMAT2_REG, 738 OV5693_FORMAT2_HBIN_EN, 739 mode->binning_x ? OV5693_FORMAT2_HBIN_EN : 0); 740 741 return ret; 742 } 743 744 static int ov5693_enable_streaming(struct ov5693_device *ov5693, bool enable) 745 { 746 int ret = 0; 747 748 ov5693_write_reg(ov5693, OV5693_SW_STREAM_REG, 749 enable ? OV5693_START_STREAMING : 750 OV5693_STOP_STREAMING, &ret); 751 752 return ret; 753 } 754 755 static int ov5693_sw_reset(struct ov5693_device *ov5693) 756 { 757 int ret = 0; 758 759 ov5693_write_reg(ov5693, OV5693_SW_RESET_REG, OV5693_SW_RESET, &ret); 760 761 return ret; 762 } 763 764 static int ov5693_sensor_init(struct ov5693_device *ov5693) 765 { 766 int ret; 767 768 ret = ov5693_sw_reset(ov5693); 769 if (ret) 770 return dev_err_probe(ov5693->dev, ret, 771 "software reset error\n"); 772 773 ret = ov5693_write_reg_array(ov5693, &ov5693_global_setting); 774 if (ret) 775 return dev_err_probe(ov5693->dev, ret, 776 "global settings error\n"); 777 778 ret = ov5693_mode_configure(ov5693); 779 if (ret) 780 return dev_err_probe(ov5693->dev, ret, 781 "mode configure error\n"); 782 783 ret = ov5693_enable_streaming(ov5693, false); 784 if (ret) 785 dev_err(ov5693->dev, "stop streaming error\n"); 786 787 return ret; 788 } 789 790 static void ov5693_sensor_powerdown(struct ov5693_device *ov5693) 791 { 792 gpiod_set_value_cansleep(ov5693->reset, 1); 793 gpiod_set_value_cansleep(ov5693->powerdown, 1); 794 795 regulator_bulk_disable(OV5693_NUM_SUPPLIES, ov5693->supplies); 796 797 clk_disable_unprepare(ov5693->xvclk); 798 } 799 800 static int ov5693_sensor_powerup(struct ov5693_device *ov5693) 801 { 802 int ret; 803 804 gpiod_set_value_cansleep(ov5693->reset, 1); 805 gpiod_set_value_cansleep(ov5693->powerdown, 1); 806 807 ret = clk_prepare_enable(ov5693->xvclk); 808 if (ret) { 809 dev_err(ov5693->dev, "Failed to enable clk\n"); 810 goto fail_power; 811 } 812 813 ret = regulator_bulk_enable(OV5693_NUM_SUPPLIES, ov5693->supplies); 814 if (ret) { 815 dev_err(ov5693->dev, "Failed to enable regulators\n"); 816 goto fail_power; 817 } 818 819 gpiod_set_value_cansleep(ov5693->powerdown, 0); 820 gpiod_set_value_cansleep(ov5693->reset, 0); 821 822 usleep_range(5000, 7500); 823 824 return 0; 825 826 fail_power: 827 ov5693_sensor_powerdown(ov5693); 828 return ret; 829 } 830 831 static int __maybe_unused ov5693_sensor_suspend(struct device *dev) 832 { 833 struct v4l2_subdev *sd = dev_get_drvdata(dev); 834 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 835 836 ov5693_sensor_powerdown(ov5693); 837 838 return 0; 839 } 840 841 static int __maybe_unused ov5693_sensor_resume(struct device *dev) 842 { 843 struct v4l2_subdev *sd = dev_get_drvdata(dev); 844 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 845 int ret; 846 847 mutex_lock(&ov5693->lock); 848 849 ret = ov5693_sensor_powerup(ov5693); 850 if (ret) 851 goto out_unlock; 852 853 ret = ov5693_sensor_init(ov5693); 854 if (ret) { 855 dev_err(dev, "ov5693 sensor init failure\n"); 856 goto err_power; 857 } 858 859 goto out_unlock; 860 861 err_power: 862 ov5693_sensor_powerdown(ov5693); 863 out_unlock: 864 mutex_unlock(&ov5693->lock); 865 return ret; 866 } 867 868 static int ov5693_detect(struct ov5693_device *ov5693) 869 { 870 int ret; 871 u32 id; 872 873 ret = ov5693_read_reg(ov5693, OV5693_REG_CHIP_ID, &id); 874 if (ret) 875 return ret; 876 877 if (id != OV5693_CHIP_ID) 878 return dev_err_probe(ov5693->dev, -ENODEV, 879 "sensor ID mismatch. Found 0x%04x\n", id); 880 881 return 0; 882 } 883 884 /* V4L2 Framework callbacks */ 885 886 static unsigned int __ov5693_calc_vts(u32 height) 887 { 888 /* 889 * We need to set a sensible default VTS for whatever format height we 890 * happen to be given from set_fmt(). This function just targets 891 * an even multiple of 30fps. 892 */ 893 894 unsigned int tgt_fps; 895 896 tgt_fps = rounddown(OV5693_PIXEL_RATE / OV5693_FIXED_PPL / height, 30); 897 898 return ALIGN_DOWN(OV5693_PIXEL_RATE / OV5693_FIXED_PPL / tgt_fps, 2); 899 } 900 901 static struct v4l2_mbus_framefmt * 902 __ov5693_get_pad_format(struct ov5693_device *ov5693, 903 struct v4l2_subdev_state *state, 904 unsigned int pad, enum v4l2_subdev_format_whence which) 905 { 906 switch (which) { 907 case V4L2_SUBDEV_FORMAT_TRY: 908 return v4l2_subdev_get_try_format(&ov5693->sd, state, pad); 909 case V4L2_SUBDEV_FORMAT_ACTIVE: 910 return &ov5693->mode.format; 911 default: 912 return NULL; 913 } 914 } 915 916 static struct v4l2_rect * 917 __ov5693_get_pad_crop(struct ov5693_device *ov5693, 918 struct v4l2_subdev_state *state, 919 unsigned int pad, enum v4l2_subdev_format_whence which) 920 { 921 switch (which) { 922 case V4L2_SUBDEV_FORMAT_TRY: 923 return v4l2_subdev_get_try_crop(&ov5693->sd, state, pad); 924 case V4L2_SUBDEV_FORMAT_ACTIVE: 925 return &ov5693->mode.crop; 926 } 927 928 return NULL; 929 } 930 931 static int ov5693_get_fmt(struct v4l2_subdev *sd, 932 struct v4l2_subdev_state *state, 933 struct v4l2_subdev_format *format) 934 { 935 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 936 937 format->format = ov5693->mode.format; 938 939 return 0; 940 } 941 942 static int ov5693_set_fmt(struct v4l2_subdev *sd, 943 struct v4l2_subdev_state *state, 944 struct v4l2_subdev_format *format) 945 { 946 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 947 const struct v4l2_rect *crop; 948 struct v4l2_mbus_framefmt *fmt; 949 unsigned int hratio, vratio; 950 unsigned int width, height; 951 unsigned int hblank; 952 int exposure_max; 953 954 crop = __ov5693_get_pad_crop(ov5693, state, format->pad, format->which); 955 956 /* 957 * Align to two to simplify the binning calculations below, and clamp 958 * the requested format at the crop rectangle 959 */ 960 width = clamp_t(unsigned int, ALIGN(format->format.width, 2), 961 OV5693_MIN_CROP_WIDTH, crop->width); 962 height = clamp_t(unsigned int, ALIGN(format->format.height, 2), 963 OV5693_MIN_CROP_HEIGHT, crop->height); 964 965 /* 966 * We can only support setting either the dimensions of the crop rect 967 * or those dimensions binned (separately) by a factor of two. 968 */ 969 hratio = clamp_t(unsigned int, 970 DIV_ROUND_CLOSEST(crop->width, width), 1, 2); 971 vratio = clamp_t(unsigned int, 972 DIV_ROUND_CLOSEST(crop->height, height), 1, 2); 973 974 fmt = __ov5693_get_pad_format(ov5693, state, format->pad, 975 format->which); 976 977 fmt->width = crop->width / hratio; 978 fmt->height = crop->height / vratio; 979 fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; 980 981 format->format = *fmt; 982 983 if (format->which == V4L2_SUBDEV_FORMAT_TRY) 984 return 0; 985 986 mutex_lock(&ov5693->lock); 987 988 ov5693->mode.binning_x = hratio > 1; 989 ov5693->mode.inc_x_odd = hratio > 1 ? 3 : 1; 990 ov5693->mode.binning_y = vratio > 1; 991 ov5693->mode.inc_y_odd = vratio > 1 ? 3 : 1; 992 993 ov5693->mode.vts = __ov5693_calc_vts(fmt->height); 994 995 __v4l2_ctrl_modify_range(ov5693->ctrls.vblank, 996 OV5693_TIMING_MIN_VTS, 997 OV5693_TIMING_MAX_VTS - fmt->height, 998 1, ov5693->mode.vts - fmt->height); 999 __v4l2_ctrl_s_ctrl(ov5693->ctrls.vblank, 1000 ov5693->mode.vts - fmt->height); 1001 1002 hblank = OV5693_FIXED_PPL - fmt->width; 1003 __v4l2_ctrl_modify_range(ov5693->ctrls.hblank, hblank, hblank, 1, 1004 hblank); 1005 1006 exposure_max = ov5693->mode.vts - OV5693_INTEGRATION_TIME_MARGIN; 1007 __v4l2_ctrl_modify_range(ov5693->ctrls.exposure, 1008 ov5693->ctrls.exposure->minimum, exposure_max, 1009 ov5693->ctrls.exposure->step, 1010 min(ov5693->ctrls.exposure->val, 1011 exposure_max)); 1012 1013 mutex_unlock(&ov5693->lock); 1014 return 0; 1015 } 1016 1017 static int ov5693_get_selection(struct v4l2_subdev *sd, 1018 struct v4l2_subdev_state *state, 1019 struct v4l2_subdev_selection *sel) 1020 { 1021 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 1022 1023 switch (sel->target) { 1024 case V4L2_SEL_TGT_CROP: 1025 mutex_lock(&ov5693->lock); 1026 sel->r = *__ov5693_get_pad_crop(ov5693, state, sel->pad, 1027 sel->which); 1028 mutex_unlock(&ov5693->lock); 1029 break; 1030 case V4L2_SEL_TGT_NATIVE_SIZE: 1031 sel->r.top = 0; 1032 sel->r.left = 0; 1033 sel->r.width = OV5693_NATIVE_WIDTH; 1034 sel->r.height = OV5693_NATIVE_HEIGHT; 1035 break; 1036 case V4L2_SEL_TGT_CROP_BOUNDS: 1037 case V4L2_SEL_TGT_CROP_DEFAULT: 1038 sel->r.top = OV5693_ACTIVE_START_TOP; 1039 sel->r.left = OV5693_ACTIVE_START_LEFT; 1040 sel->r.width = OV5693_ACTIVE_WIDTH; 1041 sel->r.height = OV5693_ACTIVE_HEIGHT; 1042 break; 1043 default: 1044 return -EINVAL; 1045 } 1046 1047 return 0; 1048 } 1049 1050 static int ov5693_set_selection(struct v4l2_subdev *sd, 1051 struct v4l2_subdev_state *state, 1052 struct v4l2_subdev_selection *sel) 1053 { 1054 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 1055 struct v4l2_mbus_framefmt *format; 1056 struct v4l2_rect *__crop; 1057 struct v4l2_rect rect; 1058 1059 if (sel->target != V4L2_SEL_TGT_CROP) 1060 return -EINVAL; 1061 1062 /* 1063 * Clamp the boundaries of the crop rectangle to the size of the sensor 1064 * pixel array. Align to multiples of 2 to ensure Bayer pattern isn't 1065 * disrupted. 1066 */ 1067 rect.left = clamp(ALIGN(sel->r.left, 2), OV5693_NATIVE_START_LEFT, 1068 OV5693_NATIVE_WIDTH); 1069 rect.top = clamp(ALIGN(sel->r.top, 2), OV5693_NATIVE_START_TOP, 1070 OV5693_NATIVE_HEIGHT); 1071 rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2), 1072 OV5693_MIN_CROP_WIDTH, OV5693_NATIVE_WIDTH); 1073 rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2), 1074 OV5693_MIN_CROP_HEIGHT, OV5693_NATIVE_HEIGHT); 1075 1076 /* Make sure the crop rectangle isn't outside the bounds of the array */ 1077 rect.width = min_t(unsigned int, rect.width, 1078 OV5693_NATIVE_WIDTH - rect.left); 1079 rect.height = min_t(unsigned int, rect.height, 1080 OV5693_NATIVE_HEIGHT - rect.top); 1081 1082 __crop = __ov5693_get_pad_crop(ov5693, state, sel->pad, sel->which); 1083 1084 if (rect.width != __crop->width || rect.height != __crop->height) { 1085 /* 1086 * Reset the output image size if the crop rectangle size has 1087 * been modified. 1088 */ 1089 format = __ov5693_get_pad_format(ov5693, state, sel->pad, 1090 sel->which); 1091 format->width = rect.width; 1092 format->height = rect.height; 1093 } 1094 1095 *__crop = rect; 1096 sel->r = rect; 1097 1098 return 0; 1099 } 1100 1101 static int ov5693_s_stream(struct v4l2_subdev *sd, int enable) 1102 { 1103 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 1104 int ret; 1105 1106 if (enable) { 1107 ret = pm_runtime_get_sync(ov5693->dev); 1108 if (ret < 0) 1109 goto err_power_down; 1110 1111 mutex_lock(&ov5693->lock); 1112 ret = __v4l2_ctrl_handler_setup(&ov5693->ctrls.handler); 1113 if (ret) { 1114 mutex_unlock(&ov5693->lock); 1115 goto err_power_down; 1116 } 1117 1118 ret = ov5693_enable_streaming(ov5693, true); 1119 mutex_unlock(&ov5693->lock); 1120 } else { 1121 mutex_lock(&ov5693->lock); 1122 ret = ov5693_enable_streaming(ov5693, false); 1123 mutex_unlock(&ov5693->lock); 1124 } 1125 if (ret) 1126 goto err_power_down; 1127 1128 ov5693->streaming = !!enable; 1129 1130 if (!enable) 1131 pm_runtime_put(ov5693->dev); 1132 1133 return 0; 1134 err_power_down: 1135 pm_runtime_put_noidle(ov5693->dev); 1136 return ret; 1137 } 1138 1139 static int ov5693_g_frame_interval(struct v4l2_subdev *sd, 1140 struct v4l2_subdev_frame_interval *interval) 1141 { 1142 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 1143 unsigned int framesize = OV5693_FIXED_PPL * (ov5693->mode.format.height + 1144 ov5693->ctrls.vblank->val); 1145 unsigned int fps = DIV_ROUND_CLOSEST(OV5693_PIXEL_RATE, framesize); 1146 1147 interval->interval.numerator = 1; 1148 interval->interval.denominator = fps; 1149 1150 return 0; 1151 } 1152 1153 static int ov5693_enum_mbus_code(struct v4l2_subdev *sd, 1154 struct v4l2_subdev_state *state, 1155 struct v4l2_subdev_mbus_code_enum *code) 1156 { 1157 /* Only a single mbus format is supported */ 1158 if (code->index > 0) 1159 return -EINVAL; 1160 1161 code->code = MEDIA_BUS_FMT_SBGGR10_1X10; 1162 return 0; 1163 } 1164 1165 static int ov5693_enum_frame_size(struct v4l2_subdev *sd, 1166 struct v4l2_subdev_state *state, 1167 struct v4l2_subdev_frame_size_enum *fse) 1168 { 1169 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 1170 struct v4l2_rect *__crop; 1171 1172 if (fse->index > 1 || fse->code != MEDIA_BUS_FMT_SBGGR10_1X10) 1173 return -EINVAL; 1174 1175 __crop = __ov5693_get_pad_crop(ov5693, state, fse->pad, fse->which); 1176 if (!__crop) 1177 return -EINVAL; 1178 1179 fse->min_width = __crop->width / (fse->index + 1); 1180 fse->min_height = __crop->height / (fse->index + 1); 1181 fse->max_width = fse->min_width; 1182 fse->max_height = fse->min_height; 1183 1184 return 0; 1185 } 1186 1187 static const struct v4l2_subdev_video_ops ov5693_video_ops = { 1188 .s_stream = ov5693_s_stream, 1189 .g_frame_interval = ov5693_g_frame_interval, 1190 }; 1191 1192 static const struct v4l2_subdev_pad_ops ov5693_pad_ops = { 1193 .enum_mbus_code = ov5693_enum_mbus_code, 1194 .enum_frame_size = ov5693_enum_frame_size, 1195 .get_fmt = ov5693_get_fmt, 1196 .set_fmt = ov5693_set_fmt, 1197 .get_selection = ov5693_get_selection, 1198 .set_selection = ov5693_set_selection, 1199 }; 1200 1201 static const struct v4l2_subdev_ops ov5693_ops = { 1202 .video = &ov5693_video_ops, 1203 .pad = &ov5693_pad_ops, 1204 }; 1205 1206 /* Sensor and Driver Configuration Functions */ 1207 1208 static int ov5693_init_controls(struct ov5693_device *ov5693) 1209 { 1210 const struct v4l2_ctrl_ops *ops = &ov5693_ctrl_ops; 1211 struct ov5693_v4l2_ctrls *ctrls = &ov5693->ctrls; 1212 struct v4l2_fwnode_device_properties props; 1213 int vblank_max, vblank_def; 1214 int exposure_max; 1215 int hblank; 1216 int ret; 1217 1218 ret = v4l2_ctrl_handler_init(&ctrls->handler, 12); 1219 if (ret) 1220 return ret; 1221 1222 /* link freq */ 1223 ctrls->link_freq = v4l2_ctrl_new_int_menu(&ctrls->handler, 1224 NULL, V4L2_CID_LINK_FREQ, 1225 0, 0, link_freq_menu_items); 1226 if (ctrls->link_freq) 1227 ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; 1228 1229 /* pixel rate */ 1230 ctrls->pixel_rate = v4l2_ctrl_new_std(&ctrls->handler, NULL, 1231 V4L2_CID_PIXEL_RATE, 0, 1232 OV5693_PIXEL_RATE, 1, 1233 OV5693_PIXEL_RATE); 1234 1235 /* Exposure */ 1236 exposure_max = ov5693->mode.vts - OV5693_INTEGRATION_TIME_MARGIN; 1237 ctrls->exposure = v4l2_ctrl_new_std(&ctrls->handler, ops, 1238 V4L2_CID_EXPOSURE, 1239 OV5693_EXPOSURE_MIN, exposure_max, 1240 OV5693_EXPOSURE_STEP, exposure_max); 1241 1242 /* Gain */ 1243 ctrls->analogue_gain = v4l2_ctrl_new_std(&ctrls->handler, 1244 ops, V4L2_CID_ANALOGUE_GAIN, 1245 OV5693_GAIN_MIN, 1246 OV5693_GAIN_MAX, 1247 OV5693_GAIN_STEP, 1248 OV5693_GAIN_DEF); 1249 1250 ctrls->digital_gain = v4l2_ctrl_new_std(&ctrls->handler, ops, 1251 V4L2_CID_DIGITAL_GAIN, 1252 OV5693_DIGITAL_GAIN_MIN, 1253 OV5693_DIGITAL_GAIN_MAX, 1254 OV5693_DIGITAL_GAIN_STEP, 1255 OV5693_DIGITAL_GAIN_DEF); 1256 1257 /* Flip */ 1258 ctrls->hflip = v4l2_ctrl_new_std(&ctrls->handler, ops, 1259 V4L2_CID_HFLIP, 0, 1, 1, 0); 1260 1261 ctrls->vflip = v4l2_ctrl_new_std(&ctrls->handler, ops, 1262 V4L2_CID_VFLIP, 0, 1, 1, 0); 1263 1264 hblank = OV5693_FIXED_PPL - ov5693->mode.format.width; 1265 ctrls->hblank = v4l2_ctrl_new_std(&ctrls->handler, ops, 1266 V4L2_CID_HBLANK, hblank, 1267 hblank, 1, hblank); 1268 1269 if (ctrls->hblank) 1270 ctrls->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; 1271 1272 vblank_max = OV5693_TIMING_MAX_VTS - ov5693->mode.format.height; 1273 vblank_def = ov5693->mode.vts - ov5693->mode.format.height; 1274 ctrls->vblank = v4l2_ctrl_new_std(&ctrls->handler, ops, 1275 V4L2_CID_VBLANK, 1276 OV5693_TIMING_MIN_VTS, 1277 vblank_max, 1, vblank_def); 1278 1279 ctrls->test_pattern = v4l2_ctrl_new_std_menu_items( 1280 &ctrls->handler, ops, 1281 V4L2_CID_TEST_PATTERN, 1282 ARRAY_SIZE(ov5693_test_pattern_menu) - 1, 1283 0, 0, ov5693_test_pattern_menu); 1284 1285 if (ctrls->handler.error) { 1286 dev_err(ov5693->dev, "Error initialising v4l2 ctrls\n"); 1287 ret = ctrls->handler.error; 1288 goto err_free_handler; 1289 } 1290 1291 /* set properties from fwnode (e.g. rotation, orientation) */ 1292 ret = v4l2_fwnode_device_parse(ov5693->dev, &props); 1293 if (ret) 1294 goto err_free_handler; 1295 1296 ret = v4l2_ctrl_new_fwnode_properties(&ctrls->handler, ops, 1297 &props); 1298 if (ret) 1299 goto err_free_handler; 1300 1301 /* Use same lock for controls as for everything else. */ 1302 ctrls->handler.lock = &ov5693->lock; 1303 ov5693->sd.ctrl_handler = &ctrls->handler; 1304 1305 return 0; 1306 1307 err_free_handler: 1308 v4l2_ctrl_handler_free(&ctrls->handler); 1309 return ret; 1310 } 1311 1312 static int ov5693_configure_gpios(struct ov5693_device *ov5693) 1313 { 1314 ov5693->reset = devm_gpiod_get_optional(ov5693->dev, "reset", 1315 GPIOD_OUT_HIGH); 1316 if (IS_ERR(ov5693->reset)) { 1317 dev_err(ov5693->dev, "Error fetching reset GPIO\n"); 1318 return PTR_ERR(ov5693->reset); 1319 } 1320 1321 ov5693->powerdown = devm_gpiod_get_optional(ov5693->dev, "powerdown", 1322 GPIOD_OUT_HIGH); 1323 if (IS_ERR(ov5693->powerdown)) { 1324 dev_err(ov5693->dev, "Error fetching powerdown GPIO\n"); 1325 return PTR_ERR(ov5693->powerdown); 1326 } 1327 1328 return 0; 1329 } 1330 1331 static int ov5693_get_regulators(struct ov5693_device *ov5693) 1332 { 1333 unsigned int i; 1334 1335 for (i = 0; i < OV5693_NUM_SUPPLIES; i++) 1336 ov5693->supplies[i].supply = ov5693_supply_names[i]; 1337 1338 return devm_regulator_bulk_get(ov5693->dev, OV5693_NUM_SUPPLIES, 1339 ov5693->supplies); 1340 } 1341 1342 static int ov5693_check_hwcfg(struct ov5693_device *ov5693) 1343 { 1344 struct fwnode_handle *fwnode = dev_fwnode(ov5693->dev); 1345 struct v4l2_fwnode_endpoint bus_cfg = { 1346 .bus_type = V4L2_MBUS_CSI2_DPHY, 1347 }; 1348 struct fwnode_handle *endpoint; 1349 unsigned int i; 1350 int ret; 1351 1352 endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL); 1353 if (!endpoint) 1354 return -EPROBE_DEFER; /* Could be provided by cio2-bridge */ 1355 1356 ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg); 1357 fwnode_handle_put(endpoint); 1358 if (ret) 1359 return ret; 1360 1361 if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2) { 1362 dev_err(ov5693->dev, "only a 2-lane CSI2 config is supported"); 1363 ret = -EINVAL; 1364 goto out_free_bus_cfg; 1365 } 1366 1367 if (!bus_cfg.nr_of_link_frequencies) { 1368 dev_err(ov5693->dev, "no link frequencies defined\n"); 1369 ret = -EINVAL; 1370 goto out_free_bus_cfg; 1371 } 1372 1373 for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) 1374 if (bus_cfg.link_frequencies[i] == OV5693_LINK_FREQ_419_2MHZ) 1375 break; 1376 1377 if (i == bus_cfg.nr_of_link_frequencies) { 1378 dev_err(ov5693->dev, "supported link freq %ull not found\n", 1379 OV5693_LINK_FREQ_419_2MHZ); 1380 ret = -EINVAL; 1381 goto out_free_bus_cfg; 1382 } 1383 1384 out_free_bus_cfg: 1385 v4l2_fwnode_endpoint_free(&bus_cfg); 1386 1387 return ret; 1388 } 1389 1390 static int ov5693_probe(struct i2c_client *client) 1391 { 1392 struct ov5693_device *ov5693; 1393 u32 xvclk_rate; 1394 int ret = 0; 1395 1396 ov5693 = devm_kzalloc(&client->dev, sizeof(*ov5693), GFP_KERNEL); 1397 if (!ov5693) 1398 return -ENOMEM; 1399 1400 ov5693->client = client; 1401 ov5693->dev = &client->dev; 1402 1403 ret = ov5693_check_hwcfg(ov5693); 1404 if (ret) 1405 return ret; 1406 1407 mutex_init(&ov5693->lock); 1408 1409 v4l2_i2c_subdev_init(&ov5693->sd, client, &ov5693_ops); 1410 1411 ov5693->xvclk = devm_clk_get_optional(&client->dev, "xvclk"); 1412 if (IS_ERR(ov5693->xvclk)) 1413 return dev_err_probe(&client->dev, PTR_ERR(ov5693->xvclk), 1414 "failed to get xvclk: %ld\n", 1415 PTR_ERR(ov5693->xvclk)); 1416 1417 if (ov5693->xvclk) { 1418 xvclk_rate = clk_get_rate(ov5693->xvclk); 1419 } else { 1420 ret = fwnode_property_read_u32(dev_fwnode(&client->dev), 1421 "clock-frequency", 1422 &xvclk_rate); 1423 1424 if (ret) { 1425 dev_err(&client->dev, "can't get clock frequency"); 1426 return ret; 1427 } 1428 } 1429 1430 if (xvclk_rate != OV5693_XVCLK_FREQ) 1431 dev_warn(&client->dev, "Found clk freq %u, expected %u\n", 1432 xvclk_rate, OV5693_XVCLK_FREQ); 1433 1434 ret = ov5693_configure_gpios(ov5693); 1435 if (ret) 1436 return ret; 1437 1438 ret = ov5693_get_regulators(ov5693); 1439 if (ret) 1440 return dev_err_probe(&client->dev, ret, 1441 "Error fetching regulators\n"); 1442 1443 ov5693->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 1444 ov5693->pad.flags = MEDIA_PAD_FL_SOURCE; 1445 ov5693->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1446 1447 ov5693->mode.crop = ov5693_default_crop; 1448 ov5693->mode.format = ov5693_default_fmt; 1449 ov5693->mode.vts = __ov5693_calc_vts(ov5693->mode.format.height); 1450 1451 ret = ov5693_init_controls(ov5693); 1452 if (ret) 1453 return ret; 1454 1455 ret = media_entity_pads_init(&ov5693->sd.entity, 1, &ov5693->pad); 1456 if (ret) 1457 goto err_ctrl_handler_free; 1458 1459 /* 1460 * We need the driver to work in the event that pm runtime is disable in 1461 * the kernel, so power up and verify the chip now. In the event that 1462 * runtime pm is disabled this will leave the chip on, so that streaming 1463 * will work. 1464 */ 1465 1466 ret = ov5693_sensor_powerup(ov5693); 1467 if (ret) 1468 goto err_media_entity_cleanup; 1469 1470 ret = ov5693_detect(ov5693); 1471 if (ret) 1472 goto err_powerdown; 1473 1474 pm_runtime_set_active(&client->dev); 1475 pm_runtime_get_noresume(&client->dev); 1476 pm_runtime_enable(&client->dev); 1477 1478 ret = v4l2_async_register_subdev_sensor(&ov5693->sd); 1479 if (ret) { 1480 dev_err(&client->dev, "failed to register V4L2 subdev: %d", 1481 ret); 1482 goto err_pm_runtime; 1483 } 1484 1485 pm_runtime_set_autosuspend_delay(&client->dev, 1000); 1486 pm_runtime_use_autosuspend(&client->dev); 1487 pm_runtime_put_autosuspend(&client->dev); 1488 1489 return ret; 1490 1491 err_pm_runtime: 1492 pm_runtime_disable(&client->dev); 1493 pm_runtime_put_noidle(&client->dev); 1494 err_powerdown: 1495 ov5693_sensor_powerdown(ov5693); 1496 err_media_entity_cleanup: 1497 media_entity_cleanup(&ov5693->sd.entity); 1498 err_ctrl_handler_free: 1499 v4l2_ctrl_handler_free(&ov5693->ctrls.handler); 1500 1501 return ret; 1502 } 1503 1504 static void ov5693_remove(struct i2c_client *client) 1505 { 1506 struct v4l2_subdev *sd = i2c_get_clientdata(client); 1507 struct ov5693_device *ov5693 = to_ov5693_sensor(sd); 1508 1509 v4l2_async_unregister_subdev(sd); 1510 media_entity_cleanup(&ov5693->sd.entity); 1511 v4l2_ctrl_handler_free(&ov5693->ctrls.handler); 1512 mutex_destroy(&ov5693->lock); 1513 1514 /* 1515 * Disable runtime PM. In case runtime PM is disabled in the kernel, 1516 * make sure to turn power off manually. 1517 */ 1518 pm_runtime_disable(&client->dev); 1519 if (!pm_runtime_status_suspended(&client->dev)) 1520 ov5693_sensor_powerdown(ov5693); 1521 pm_runtime_set_suspended(&client->dev); 1522 } 1523 1524 static const struct dev_pm_ops ov5693_pm_ops = { 1525 SET_RUNTIME_PM_OPS(ov5693_sensor_suspend, ov5693_sensor_resume, NULL) 1526 }; 1527 1528 static const struct acpi_device_id ov5693_acpi_match[] = { 1529 {"INT33BE"}, 1530 {}, 1531 }; 1532 MODULE_DEVICE_TABLE(acpi, ov5693_acpi_match); 1533 1534 static const struct of_device_id ov5693_of_match[] = { 1535 { .compatible = "ovti,ov5693", }, 1536 { /* sentinel */ }, 1537 }; 1538 MODULE_DEVICE_TABLE(of, ov5693_of_match); 1539 1540 static struct i2c_driver ov5693_driver = { 1541 .driver = { 1542 .name = "ov5693", 1543 .acpi_match_table = ov5693_acpi_match, 1544 .of_match_table = ov5693_of_match, 1545 .pm = &ov5693_pm_ops, 1546 }, 1547 .probe_new = ov5693_probe, 1548 .remove = ov5693_remove, 1549 }; 1550 module_i2c_driver(ov5693_driver); 1551 1552 MODULE_DESCRIPTION("A low-level driver for OmniVision 5693 sensors"); 1553 MODULE_LICENSE("GPL"); 1554