xref: /openbmc/linux/drivers/media/i2c/ov5640.c (revision 9134211f)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
4  * Copyright (C) 2014-2017 Mentor Graphics Inc.
5  */
6 
7 #include <linux/clk.h>
8 #include <linux/clk-provider.h>
9 #include <linux/clkdev.h>
10 #include <linux/ctype.h>
11 #include <linux/delay.h>
12 #include <linux/device.h>
13 #include <linux/gpio/consumer.h>
14 #include <linux/i2c.h>
15 #include <linux/init.h>
16 #include <linux/module.h>
17 #include <linux/of_device.h>
18 #include <linux/pm_runtime.h>
19 #include <linux/regulator/consumer.h>
20 #include <linux/slab.h>
21 #include <linux/types.h>
22 #include <media/v4l2-async.h>
23 #include <media/v4l2-ctrls.h>
24 #include <media/v4l2-device.h>
25 #include <media/v4l2-event.h>
26 #include <media/v4l2-fwnode.h>
27 #include <media/v4l2-subdev.h>
28 
29 /* min/typical/max system clock (xclk) frequencies */
30 #define OV5640_XCLK_MIN  6000000
31 #define OV5640_XCLK_MAX 54000000
32 
33 #define OV5640_NATIVE_WIDTH		2624
34 #define OV5640_NATIVE_HEIGHT		1964
35 #define OV5640_PIXEL_ARRAY_TOP		14
36 #define OV5640_PIXEL_ARRAY_LEFT		16
37 #define OV5640_PIXEL_ARRAY_WIDTH	2592
38 #define OV5640_PIXEL_ARRAY_HEIGHT	1944
39 
40 /* FIXME: not documented. */
41 #define OV5640_MIN_VBLANK	24
42 #define OV5640_MAX_VTS		3375
43 
44 #define OV5640_DEFAULT_SLAVE_ID 0x3c
45 
46 #define OV5640_LINK_RATE_MAX		490000000U
47 
48 #define OV5640_REG_SYS_RESET02		0x3002
49 #define OV5640_REG_SYS_CLOCK_ENABLE02	0x3006
50 #define OV5640_REG_SYS_CTRL0		0x3008
51 #define OV5640_REG_SYS_CTRL0_SW_PWDN	0x42
52 #define OV5640_REG_SYS_CTRL0_SW_PWUP	0x02
53 #define OV5640_REG_SYS_CTRL0_SW_RST	0x82
54 #define OV5640_REG_CHIP_ID		0x300a
55 #define OV5640_REG_IO_MIPI_CTRL00	0x300e
56 #define OV5640_REG_PAD_OUTPUT_ENABLE01	0x3017
57 #define OV5640_REG_PAD_OUTPUT_ENABLE02	0x3018
58 #define OV5640_REG_PAD_OUTPUT00		0x3019
59 #define OV5640_REG_SYSTEM_CONTROL1	0x302e
60 #define OV5640_REG_SC_PLL_CTRL0		0x3034
61 #define OV5640_REG_SC_PLL_CTRL1		0x3035
62 #define OV5640_REG_SC_PLL_CTRL2		0x3036
63 #define OV5640_REG_SC_PLL_CTRL3		0x3037
64 #define OV5640_REG_SLAVE_ID		0x3100
65 #define OV5640_REG_SCCB_SYS_CTRL1	0x3103
66 #define OV5640_REG_SYS_ROOT_DIVIDER	0x3108
67 #define OV5640_REG_AWB_R_GAIN		0x3400
68 #define OV5640_REG_AWB_G_GAIN		0x3402
69 #define OV5640_REG_AWB_B_GAIN		0x3404
70 #define OV5640_REG_AWB_MANUAL_CTRL	0x3406
71 #define OV5640_REG_AEC_PK_EXPOSURE_HI	0x3500
72 #define OV5640_REG_AEC_PK_EXPOSURE_MED	0x3501
73 #define OV5640_REG_AEC_PK_EXPOSURE_LO	0x3502
74 #define OV5640_REG_AEC_PK_MANUAL	0x3503
75 #define OV5640_REG_AEC_PK_REAL_GAIN	0x350a
76 #define OV5640_REG_AEC_PK_VTS		0x350c
77 #define OV5640_REG_TIMING_HS		0x3800
78 #define OV5640_REG_TIMING_VS		0x3802
79 #define OV5640_REG_TIMING_HW		0x3804
80 #define OV5640_REG_TIMING_VH		0x3806
81 #define OV5640_REG_TIMING_DVPHO		0x3808
82 #define OV5640_REG_TIMING_DVPVO		0x380a
83 #define OV5640_REG_TIMING_HTS		0x380c
84 #define OV5640_REG_TIMING_VTS		0x380e
85 #define OV5640_REG_TIMING_HOFFS		0x3810
86 #define OV5640_REG_TIMING_VOFFS		0x3812
87 #define OV5640_REG_TIMING_TC_REG20	0x3820
88 #define OV5640_REG_TIMING_TC_REG21	0x3821
89 #define OV5640_REG_AEC_CTRL00		0x3a00
90 #define OV5640_REG_AEC_B50_STEP		0x3a08
91 #define OV5640_REG_AEC_B60_STEP		0x3a0a
92 #define OV5640_REG_AEC_CTRL0D		0x3a0d
93 #define OV5640_REG_AEC_CTRL0E		0x3a0e
94 #define OV5640_REG_AEC_CTRL0F		0x3a0f
95 #define OV5640_REG_AEC_CTRL10		0x3a10
96 #define OV5640_REG_AEC_CTRL11		0x3a11
97 #define OV5640_REG_AEC_CTRL1B		0x3a1b
98 #define OV5640_REG_AEC_CTRL1E		0x3a1e
99 #define OV5640_REG_AEC_CTRL1F		0x3a1f
100 #define OV5640_REG_HZ5060_CTRL00	0x3c00
101 #define OV5640_REG_HZ5060_CTRL01	0x3c01
102 #define OV5640_REG_SIGMADELTA_CTRL0C	0x3c0c
103 #define OV5640_REG_FRAME_CTRL01		0x4202
104 #define OV5640_REG_FORMAT_CONTROL00	0x4300
105 #define OV5640_REG_VFIFO_HSIZE		0x4602
106 #define OV5640_REG_VFIFO_VSIZE		0x4604
107 #define OV5640_REG_JPG_MODE_SELECT	0x4713
108 #define OV5640_REG_CCIR656_CTRL00	0x4730
109 #define OV5640_REG_POLARITY_CTRL00	0x4740
110 #define OV5640_REG_MIPI_CTRL00		0x4800
111 #define OV5640_REG_DEBUG_MODE		0x4814
112 #define OV5640_REG_PCLK_PERIOD		0x4837
113 #define OV5640_REG_ISP_FORMAT_MUX_CTRL	0x501f
114 #define OV5640_REG_PRE_ISP_TEST_SET1	0x503d
115 #define OV5640_REG_SDE_CTRL0		0x5580
116 #define OV5640_REG_SDE_CTRL1		0x5581
117 #define OV5640_REG_SDE_CTRL3		0x5583
118 #define OV5640_REG_SDE_CTRL4		0x5584
119 #define OV5640_REG_SDE_CTRL5		0x5585
120 #define OV5640_REG_AVG_READOUT		0x56a1
121 
122 enum ov5640_mode_id {
123 	OV5640_MODE_QQVGA_160_120 = 0,
124 	OV5640_MODE_QCIF_176_144,
125 	OV5640_MODE_QVGA_320_240,
126 	OV5640_MODE_VGA_640_480,
127 	OV5640_MODE_NTSC_720_480,
128 	OV5640_MODE_PAL_720_576,
129 	OV5640_MODE_XGA_1024_768,
130 	OV5640_MODE_720P_1280_720,
131 	OV5640_MODE_1080P_1920_1080,
132 	OV5640_MODE_QSXGA_2592_1944,
133 	OV5640_NUM_MODES,
134 };
135 
136 enum ov5640_frame_rate {
137 	OV5640_15_FPS = 0,
138 	OV5640_30_FPS,
139 	OV5640_60_FPS,
140 	OV5640_NUM_FRAMERATES,
141 };
142 
143 enum ov5640_pixel_rate_id {
144 	OV5640_PIXEL_RATE_168M,
145 	OV5640_PIXEL_RATE_148M,
146 	OV5640_PIXEL_RATE_124M,
147 	OV5640_PIXEL_RATE_96M,
148 	OV5640_PIXEL_RATE_48M,
149 	OV5640_NUM_PIXEL_RATES,
150 };
151 
152 /*
153  * The chip manual suggests 24/48/96/192 MHz pixel clocks.
154  *
155  * 192MHz exceeds the sysclk limits; use 168MHz as maximum pixel rate for
156  * full resolution mode @15 FPS.
157  */
158 static const u32 ov5640_pixel_rates[] = {
159 	[OV5640_PIXEL_RATE_168M] = 168000000,
160 	[OV5640_PIXEL_RATE_148M] = 148000000,
161 	[OV5640_PIXEL_RATE_124M] = 124000000,
162 	[OV5640_PIXEL_RATE_96M] = 96000000,
163 	[OV5640_PIXEL_RATE_48M] = 48000000,
164 };
165 
166 /*
167  * MIPI CSI-2 link frequencies.
168  *
169  * Derived from the above defined pixel rate for bpp = (8, 16, 24) and
170  * data_lanes = (1, 2)
171  *
172  * link_freq = (pixel_rate * bpp) / (2 * data_lanes)
173  */
174 static const s64 ov5640_csi2_link_freqs[] = {
175 	992000000, 888000000, 768000000, 744000000, 672000000, 672000000,
176 	592000000, 592000000, 576000000, 576000000, 496000000, 496000000,
177 	384000000, 384000000, 384000000, 336000000, 296000000, 288000000,
178 	248000000, 192000000, 192000000, 192000000, 96000000,
179 };
180 
181 /* Link freq for default mode: UYVY 16 bpp, 2 data lanes. */
182 #define OV5640_DEFAULT_LINK_FREQ	13
183 
184 enum ov5640_format_mux {
185 	OV5640_FMT_MUX_YUV422 = 0,
186 	OV5640_FMT_MUX_RGB,
187 	OV5640_FMT_MUX_DITHER,
188 	OV5640_FMT_MUX_RAW_DPC,
189 	OV5640_FMT_MUX_SNR_RAW,
190 	OV5640_FMT_MUX_RAW_CIP,
191 };
192 
193 struct ov5640_pixfmt {
194 	u32 code;
195 	u32 colorspace;
196 	u8 bpp;
197 	u8 ctrl00;
198 	enum ov5640_format_mux mux;
199 };
200 
201 static const struct ov5640_pixfmt ov5640_dvp_formats[] = {
202 	{
203 		/* YUV422, YUYV */
204 		.code		= MEDIA_BUS_FMT_JPEG_1X8,
205 		.colorspace	= V4L2_COLORSPACE_JPEG,
206 		.bpp		= 16,
207 		.ctrl00		= 0x30,
208 		.mux		= OV5640_FMT_MUX_YUV422,
209 	}, {
210 		/* YUV422, UYVY */
211 		.code		= MEDIA_BUS_FMT_UYVY8_2X8,
212 		.colorspace	= V4L2_COLORSPACE_SRGB,
213 		.bpp		= 16,
214 		.ctrl00		= 0x3f,
215 		.mux		= OV5640_FMT_MUX_YUV422,
216 	}, {
217 		/* YUV422, YUYV */
218 		.code		= MEDIA_BUS_FMT_YUYV8_2X8,
219 		.colorspace	= V4L2_COLORSPACE_SRGB,
220 		.bpp		= 16,
221 		.ctrl00		= 0x30,
222 		.mux		= OV5640_FMT_MUX_YUV422,
223 	}, {
224 		/* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
225 		.code		= MEDIA_BUS_FMT_RGB565_2X8_LE,
226 		.colorspace	= V4L2_COLORSPACE_SRGB,
227 		.bpp		= 16,
228 		.ctrl00		= 0x6f,
229 		.mux		= OV5640_FMT_MUX_RGB,
230 	}, {
231 		/* RGB565 {r[4:0],g[5:3]},{g[2:0],b[4:0]} */
232 		.code		= MEDIA_BUS_FMT_RGB565_2X8_BE,
233 		.colorspace	= V4L2_COLORSPACE_SRGB,
234 		.bpp		= 16,
235 		.ctrl00		= 0x61,
236 		.mux		= OV5640_FMT_MUX_RGB,
237 	}, {
238 		/* Raw, BGBG... / GRGR... */
239 		.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
240 		.colorspace	= V4L2_COLORSPACE_SRGB,
241 		.bpp		= 8,
242 		.ctrl00		= 0x00,
243 		.mux		= OV5640_FMT_MUX_RAW_DPC,
244 	}, {
245 		/* Raw bayer, GBGB... / RGRG... */
246 		.code		= MEDIA_BUS_FMT_SGBRG8_1X8,
247 		.colorspace	= V4L2_COLORSPACE_SRGB,
248 		.bpp		= 8,
249 		.ctrl00		= 0x01,
250 		.mux		= OV5640_FMT_MUX_RAW_DPC,
251 	}, {
252 		/* Raw bayer, GRGR... / BGBG... */
253 		.code		= MEDIA_BUS_FMT_SGRBG8_1X8,
254 		.colorspace	= V4L2_COLORSPACE_SRGB,
255 		.bpp		= 8,
256 		.ctrl00		= 0x02,
257 		.mux		= OV5640_FMT_MUX_RAW_DPC,
258 	}, {
259 		/* Raw bayer, RGRG... / GBGB... */
260 		.code		= MEDIA_BUS_FMT_SRGGB8_1X8,
261 		.colorspace	= V4L2_COLORSPACE_SRGB,
262 		.bpp		= 8,
263 		.ctrl00		= 0x03,
264 		.mux		= OV5640_FMT_MUX_RAW_DPC,
265 	},
266 	{ /* sentinel */ }
267 };
268 
269 static const struct ov5640_pixfmt ov5640_csi2_formats[] = {
270 	{
271 		/* YUV422, YUYV */
272 		.code		= MEDIA_BUS_FMT_JPEG_1X8,
273 		.colorspace	= V4L2_COLORSPACE_JPEG,
274 		.bpp		= 16,
275 		.ctrl00		= 0x30,
276 		.mux		= OV5640_FMT_MUX_YUV422,
277 	}, {
278 		/* YUV422, UYVY */
279 		.code		= MEDIA_BUS_FMT_UYVY8_1X16,
280 		.colorspace	= V4L2_COLORSPACE_SRGB,
281 		.bpp		= 16,
282 		.ctrl00		= 0x3f,
283 		.mux		= OV5640_FMT_MUX_YUV422,
284 	}, {
285 		/* YUV422, YUYV */
286 		.code		= MEDIA_BUS_FMT_YUYV8_1X16,
287 		.colorspace	= V4L2_COLORSPACE_SRGB,
288 		.bpp		= 16,
289 		.ctrl00		= 0x30,
290 		.mux		= OV5640_FMT_MUX_YUV422,
291 	}, {
292 		/* RGB565 {g[2:0],b[4:0]},{r[4:0],g[5:3]} */
293 		.code		= MEDIA_BUS_FMT_RGB565_1X16,
294 		.colorspace	= V4L2_COLORSPACE_SRGB,
295 		.bpp		= 16,
296 		.ctrl00		= 0x6f,
297 		.mux		= OV5640_FMT_MUX_RGB,
298 	}, {
299 		/* BGR888: RGB */
300 		.code		= MEDIA_BUS_FMT_BGR888_1X24,
301 		.colorspace	= V4L2_COLORSPACE_SRGB,
302 		.bpp		= 24,
303 		.ctrl00		= 0x23,
304 		.mux		= OV5640_FMT_MUX_RGB,
305 	}, {
306 		/* Raw, BGBG... / GRGR... */
307 		.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
308 		.colorspace	= V4L2_COLORSPACE_SRGB,
309 		.bpp		= 8,
310 		.ctrl00		= 0x00,
311 		.mux		= OV5640_FMT_MUX_RAW_DPC,
312 	}, {
313 		/* Raw bayer, GBGB... / RGRG... */
314 		.code		= MEDIA_BUS_FMT_SGBRG8_1X8,
315 		.colorspace	= V4L2_COLORSPACE_SRGB,
316 		.bpp		= 8,
317 		.ctrl00		= 0x01,
318 		.mux		= OV5640_FMT_MUX_RAW_DPC,
319 	}, {
320 		/* Raw bayer, GRGR... / BGBG... */
321 		.code		= MEDIA_BUS_FMT_SGRBG8_1X8,
322 		.colorspace	= V4L2_COLORSPACE_SRGB,
323 		.bpp		= 8,
324 		.ctrl00		= 0x02,
325 		.mux		= OV5640_FMT_MUX_RAW_DPC,
326 	}, {
327 		/* Raw bayer, RGRG... / GBGB... */
328 		.code		= MEDIA_BUS_FMT_SRGGB8_1X8,
329 		.colorspace	= V4L2_COLORSPACE_SRGB,
330 		.bpp		= 8,
331 		.ctrl00		= 0x03,
332 		.mux		= OV5640_FMT_MUX_RAW_DPC,
333 	},
334 	{ /* sentinel */ }
335 };
336 
337 /*
338  * FIXME: remove this when a subdev API becomes available
339  * to set the MIPI CSI-2 virtual channel.
340  */
341 static unsigned int virtual_channel;
342 module_param(virtual_channel, uint, 0444);
343 MODULE_PARM_DESC(virtual_channel,
344 		 "MIPI CSI-2 virtual channel (0..3), default 0");
345 
346 static const int ov5640_framerates[] = {
347 	[OV5640_15_FPS] = 15,
348 	[OV5640_30_FPS] = 30,
349 	[OV5640_60_FPS] = 60,
350 };
351 
352 /* regulator supplies */
353 static const char * const ov5640_supply_name[] = {
354 	"DOVDD", /* Digital I/O (1.8V) supply */
355 	"AVDD",  /* Analog (2.8V) supply */
356 	"DVDD",  /* Digital Core (1.5V) supply */
357 };
358 
359 #define OV5640_NUM_SUPPLIES ARRAY_SIZE(ov5640_supply_name)
360 
361 /*
362  * Image size under 1280 * 960 are SUBSAMPLING
363  * Image size upper 1280 * 960 are SCALING
364  */
365 enum ov5640_downsize_mode {
366 	SUBSAMPLING,
367 	SCALING,
368 };
369 
370 struct reg_value {
371 	u16 reg_addr;
372 	u8 val;
373 	u8 mask;
374 	u32 delay_ms;
375 };
376 
377 struct ov5640_timings {
378 	/* Analog crop rectangle. */
379 	struct v4l2_rect analog_crop;
380 	/* Visibile crop: from analog crop top-left corner. */
381 	struct v4l2_rect crop;
382 	/* Total pixels per line: width + fixed hblank. */
383 	u32 htot;
384 	/* Default vertical blanking: frame height = height + vblank. */
385 	u32 vblank_def;
386 };
387 
388 struct ov5640_mode_info {
389 	enum ov5640_mode_id id;
390 	enum ov5640_downsize_mode dn_mode;
391 	enum ov5640_pixel_rate_id pixel_rate;
392 
393 	unsigned int width;
394 	unsigned int height;
395 
396 	struct ov5640_timings dvp_timings;
397 	struct ov5640_timings csi2_timings;
398 
399 	const struct reg_value *reg_data;
400 	u32 reg_data_size;
401 
402 	/* Used by s_frame_interval only. */
403 	u32 max_fps;
404 	u32 def_fps;
405 };
406 
407 struct ov5640_ctrls {
408 	struct v4l2_ctrl_handler handler;
409 	struct v4l2_ctrl *pixel_rate;
410 	struct v4l2_ctrl *link_freq;
411 	struct v4l2_ctrl *hblank;
412 	struct v4l2_ctrl *vblank;
413 	struct {
414 		struct v4l2_ctrl *auto_exp;
415 		struct v4l2_ctrl *exposure;
416 	};
417 	struct {
418 		struct v4l2_ctrl *auto_wb;
419 		struct v4l2_ctrl *blue_balance;
420 		struct v4l2_ctrl *red_balance;
421 	};
422 	struct {
423 		struct v4l2_ctrl *auto_gain;
424 		struct v4l2_ctrl *gain;
425 	};
426 	struct v4l2_ctrl *brightness;
427 	struct v4l2_ctrl *light_freq;
428 	struct v4l2_ctrl *saturation;
429 	struct v4l2_ctrl *contrast;
430 	struct v4l2_ctrl *hue;
431 	struct v4l2_ctrl *test_pattern;
432 	struct v4l2_ctrl *hflip;
433 	struct v4l2_ctrl *vflip;
434 };
435 
436 struct ov5640_dev {
437 	struct i2c_client *i2c_client;
438 	struct v4l2_subdev sd;
439 	struct media_pad pad;
440 	struct v4l2_fwnode_endpoint ep; /* the parsed DT endpoint info */
441 	struct clk *xclk; /* system clock to OV5640 */
442 	u32 xclk_freq;
443 
444 	struct regulator_bulk_data supplies[OV5640_NUM_SUPPLIES];
445 	struct gpio_desc *reset_gpio;
446 	struct gpio_desc *pwdn_gpio;
447 	bool   upside_down;
448 
449 	/* lock to protect all members below */
450 	struct mutex lock;
451 
452 	struct v4l2_mbus_framefmt fmt;
453 	bool pending_fmt_change;
454 
455 	const struct ov5640_mode_info *current_mode;
456 	const struct ov5640_mode_info *last_mode;
457 	enum ov5640_frame_rate current_fr;
458 	struct v4l2_fract frame_interval;
459 	s64 current_link_freq;
460 
461 	struct ov5640_ctrls ctrls;
462 
463 	u32 prev_sysclk, prev_hts;
464 	u32 ae_low, ae_high, ae_target;
465 
466 	bool pending_mode_change;
467 	bool streaming;
468 };
469 
470 static inline struct ov5640_dev *to_ov5640_dev(struct v4l2_subdev *sd)
471 {
472 	return container_of(sd, struct ov5640_dev, sd);
473 }
474 
475 static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
476 {
477 	return &container_of(ctrl->handler, struct ov5640_dev,
478 			     ctrls.handler)->sd;
479 }
480 
481 static inline bool ov5640_is_csi2(const struct ov5640_dev *sensor)
482 {
483 	return sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY;
484 }
485 
486 static inline const struct ov5640_pixfmt *
487 ov5640_formats(struct ov5640_dev *sensor)
488 {
489 	return ov5640_is_csi2(sensor) ? ov5640_csi2_formats
490 				      : ov5640_dvp_formats;
491 }
492 
493 static const struct ov5640_pixfmt *
494 ov5640_code_to_pixfmt(struct ov5640_dev *sensor, u32 code)
495 {
496 	const struct ov5640_pixfmt *formats = ov5640_formats(sensor);
497 	unsigned int i;
498 
499 	for (i = 0; formats[i].code; ++i) {
500 		if (formats[i].code == code)
501 			return &formats[i];
502 	}
503 
504 	return &formats[0];
505 }
506 
507 static u32 ov5640_code_to_bpp(struct ov5640_dev *sensor, u32 code)
508 {
509 	const struct ov5640_pixfmt *format = ov5640_code_to_pixfmt(sensor,
510 								   code);
511 
512 	return format->bpp;
513 }
514 
515 /*
516  * FIXME: all of these register tables are likely filled with
517  * entries that set the register to their power-on default values,
518  * and which are otherwise not touched by this driver. Those entries
519  * should be identified and removed to speed register load time
520  * over i2c.
521  */
522 /* YUV422 UYVY VGA@30fps */
523 
524 static const struct v4l2_mbus_framefmt ov5640_csi2_default_fmt = {
525 	.code = MEDIA_BUS_FMT_UYVY8_1X16,
526 	.width = 640,
527 	.height = 480,
528 	.colorspace = V4L2_COLORSPACE_SRGB,
529 	.ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(V4L2_COLORSPACE_SRGB),
530 	.quantization = V4L2_QUANTIZATION_FULL_RANGE,
531 	.xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(V4L2_COLORSPACE_SRGB),
532 	.field = V4L2_FIELD_NONE,
533 };
534 
535 static const struct v4l2_mbus_framefmt ov5640_dvp_default_fmt = {
536 	.code = MEDIA_BUS_FMT_UYVY8_2X8,
537 	.width = 640,
538 	.height = 480,
539 	.colorspace = V4L2_COLORSPACE_SRGB,
540 	.ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(V4L2_COLORSPACE_SRGB),
541 	.quantization = V4L2_QUANTIZATION_FULL_RANGE,
542 	.xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(V4L2_COLORSPACE_SRGB),
543 	.field = V4L2_FIELD_NONE,
544 };
545 
546 static const struct reg_value ov5640_init_setting[] = {
547 	{0x3103, 0x11, 0, 0},
548 	{0x3103, 0x03, 0, 0}, {0x3630, 0x36, 0, 0},
549 	{0x3631, 0x0e, 0, 0}, {0x3632, 0xe2, 0, 0}, {0x3633, 0x12, 0, 0},
550 	{0x3621, 0xe0, 0, 0}, {0x3704, 0xa0, 0, 0}, {0x3703, 0x5a, 0, 0},
551 	{0x3715, 0x78, 0, 0}, {0x3717, 0x01, 0, 0}, {0x370b, 0x60, 0, 0},
552 	{0x3705, 0x1a, 0, 0}, {0x3905, 0x02, 0, 0}, {0x3906, 0x10, 0, 0},
553 	{0x3901, 0x0a, 0, 0}, {0x3731, 0x12, 0, 0}, {0x3600, 0x08, 0, 0},
554 	{0x3601, 0x33, 0, 0}, {0x302d, 0x60, 0, 0}, {0x3620, 0x52, 0, 0},
555 	{0x371b, 0x20, 0, 0}, {0x471c, 0x50, 0, 0}, {0x3a13, 0x43, 0, 0},
556 	{0x3a18, 0x00, 0, 0}, {0x3a19, 0xf8, 0, 0}, {0x3635, 0x13, 0, 0},
557 	{0x3636, 0x03, 0, 0}, {0x3634, 0x40, 0, 0}, {0x3622, 0x01, 0, 0},
558 	{0x3c01, 0xa4, 0, 0}, {0x3c04, 0x28, 0, 0}, {0x3c05, 0x98, 0, 0},
559 	{0x3c06, 0x00, 0, 0}, {0x3c07, 0x08, 0, 0}, {0x3c08, 0x00, 0, 0},
560 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
561 	{0x3820, 0x41, 0, 0}, {0x3821, 0x07, 0, 0}, {0x3814, 0x31, 0, 0},
562 	{0x3815, 0x31, 0, 0},
563 	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
564 	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
565 	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
566 	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
567 	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
568 	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0}, {0x3000, 0x00, 0, 0},
569 	{0x3002, 0x1c, 0, 0}, {0x3004, 0xff, 0, 0}, {0x3006, 0xc3, 0, 0},
570 	{0x302e, 0x08, 0, 0}, {0x4300, 0x3f, 0, 0},
571 	{0x501f, 0x00, 0, 0}, {0x4407, 0x04, 0, 0},
572 	{0x440e, 0x00, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
573 	{0x4837, 0x0a, 0, 0}, {0x3824, 0x02, 0, 0},
574 	{0x5000, 0xa7, 0, 0}, {0x5001, 0xa3, 0, 0}, {0x5180, 0xff, 0, 0},
575 	{0x5181, 0xf2, 0, 0}, {0x5182, 0x00, 0, 0}, {0x5183, 0x14, 0, 0},
576 	{0x5184, 0x25, 0, 0}, {0x5185, 0x24, 0, 0}, {0x5186, 0x09, 0, 0},
577 	{0x5187, 0x09, 0, 0}, {0x5188, 0x09, 0, 0}, {0x5189, 0x88, 0, 0},
578 	{0x518a, 0x54, 0, 0}, {0x518b, 0xee, 0, 0}, {0x518c, 0xb2, 0, 0},
579 	{0x518d, 0x50, 0, 0}, {0x518e, 0x34, 0, 0}, {0x518f, 0x6b, 0, 0},
580 	{0x5190, 0x46, 0, 0}, {0x5191, 0xf8, 0, 0}, {0x5192, 0x04, 0, 0},
581 	{0x5193, 0x70, 0, 0}, {0x5194, 0xf0, 0, 0}, {0x5195, 0xf0, 0, 0},
582 	{0x5196, 0x03, 0, 0}, {0x5197, 0x01, 0, 0}, {0x5198, 0x04, 0, 0},
583 	{0x5199, 0x6c, 0, 0}, {0x519a, 0x04, 0, 0}, {0x519b, 0x00, 0, 0},
584 	{0x519c, 0x09, 0, 0}, {0x519d, 0x2b, 0, 0}, {0x519e, 0x38, 0, 0},
585 	{0x5381, 0x1e, 0, 0}, {0x5382, 0x5b, 0, 0}, {0x5383, 0x08, 0, 0},
586 	{0x5384, 0x0a, 0, 0}, {0x5385, 0x7e, 0, 0}, {0x5386, 0x88, 0, 0},
587 	{0x5387, 0x7c, 0, 0}, {0x5388, 0x6c, 0, 0}, {0x5389, 0x10, 0, 0},
588 	{0x538a, 0x01, 0, 0}, {0x538b, 0x98, 0, 0}, {0x5300, 0x08, 0, 0},
589 	{0x5301, 0x30, 0, 0}, {0x5302, 0x10, 0, 0}, {0x5303, 0x00, 0, 0},
590 	{0x5304, 0x08, 0, 0}, {0x5305, 0x30, 0, 0}, {0x5306, 0x08, 0, 0},
591 	{0x5307, 0x16, 0, 0}, {0x5309, 0x08, 0, 0}, {0x530a, 0x30, 0, 0},
592 	{0x530b, 0x04, 0, 0}, {0x530c, 0x06, 0, 0}, {0x5480, 0x01, 0, 0},
593 	{0x5481, 0x08, 0, 0}, {0x5482, 0x14, 0, 0}, {0x5483, 0x28, 0, 0},
594 	{0x5484, 0x51, 0, 0}, {0x5485, 0x65, 0, 0}, {0x5486, 0x71, 0, 0},
595 	{0x5487, 0x7d, 0, 0}, {0x5488, 0x87, 0, 0}, {0x5489, 0x91, 0, 0},
596 	{0x548a, 0x9a, 0, 0}, {0x548b, 0xaa, 0, 0}, {0x548c, 0xb8, 0, 0},
597 	{0x548d, 0xcd, 0, 0}, {0x548e, 0xdd, 0, 0}, {0x548f, 0xea, 0, 0},
598 	{0x5490, 0x1d, 0, 0}, {0x5580, 0x02, 0, 0}, {0x5583, 0x40, 0, 0},
599 	{0x5584, 0x10, 0, 0}, {0x5589, 0x10, 0, 0}, {0x558a, 0x00, 0, 0},
600 	{0x558b, 0xf8, 0, 0}, {0x5800, 0x23, 0, 0}, {0x5801, 0x14, 0, 0},
601 	{0x5802, 0x0f, 0, 0}, {0x5803, 0x0f, 0, 0}, {0x5804, 0x12, 0, 0},
602 	{0x5805, 0x26, 0, 0}, {0x5806, 0x0c, 0, 0}, {0x5807, 0x08, 0, 0},
603 	{0x5808, 0x05, 0, 0}, {0x5809, 0x05, 0, 0}, {0x580a, 0x08, 0, 0},
604 	{0x580b, 0x0d, 0, 0}, {0x580c, 0x08, 0, 0}, {0x580d, 0x03, 0, 0},
605 	{0x580e, 0x00, 0, 0}, {0x580f, 0x00, 0, 0}, {0x5810, 0x03, 0, 0},
606 	{0x5811, 0x09, 0, 0}, {0x5812, 0x07, 0, 0}, {0x5813, 0x03, 0, 0},
607 	{0x5814, 0x00, 0, 0}, {0x5815, 0x01, 0, 0}, {0x5816, 0x03, 0, 0},
608 	{0x5817, 0x08, 0, 0}, {0x5818, 0x0d, 0, 0}, {0x5819, 0x08, 0, 0},
609 	{0x581a, 0x05, 0, 0}, {0x581b, 0x06, 0, 0}, {0x581c, 0x08, 0, 0},
610 	{0x581d, 0x0e, 0, 0}, {0x581e, 0x29, 0, 0}, {0x581f, 0x17, 0, 0},
611 	{0x5820, 0x11, 0, 0}, {0x5821, 0x11, 0, 0}, {0x5822, 0x15, 0, 0},
612 	{0x5823, 0x28, 0, 0}, {0x5824, 0x46, 0, 0}, {0x5825, 0x26, 0, 0},
613 	{0x5826, 0x08, 0, 0}, {0x5827, 0x26, 0, 0}, {0x5828, 0x64, 0, 0},
614 	{0x5829, 0x26, 0, 0}, {0x582a, 0x24, 0, 0}, {0x582b, 0x22, 0, 0},
615 	{0x582c, 0x24, 0, 0}, {0x582d, 0x24, 0, 0}, {0x582e, 0x06, 0, 0},
616 	{0x582f, 0x22, 0, 0}, {0x5830, 0x40, 0, 0}, {0x5831, 0x42, 0, 0},
617 	{0x5832, 0x24, 0, 0}, {0x5833, 0x26, 0, 0}, {0x5834, 0x24, 0, 0},
618 	{0x5835, 0x22, 0, 0}, {0x5836, 0x22, 0, 0}, {0x5837, 0x26, 0, 0},
619 	{0x5838, 0x44, 0, 0}, {0x5839, 0x24, 0, 0}, {0x583a, 0x26, 0, 0},
620 	{0x583b, 0x28, 0, 0}, {0x583c, 0x42, 0, 0}, {0x583d, 0xce, 0, 0},
621 	{0x5025, 0x00, 0, 0}, {0x3a0f, 0x30, 0, 0}, {0x3a10, 0x28, 0, 0},
622 	{0x3a1b, 0x30, 0, 0}, {0x3a1e, 0x26, 0, 0}, {0x3a11, 0x60, 0, 0},
623 	{0x3a1f, 0x14, 0, 0}, {0x3008, 0x02, 0, 0}, {0x3c00, 0x04, 0, 300},
624 };
625 
626 static const struct reg_value ov5640_setting_low_res[] = {
627 	{0x3c07, 0x08, 0, 0},
628 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
629 	{0x3814, 0x31, 0, 0},
630 	{0x3815, 0x31, 0, 0},
631 	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
632 	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x03, 0, 0},
633 	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
634 	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
635 	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
636 	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
637 	{0x4407, 0x04, 0, 0}, {0x5001, 0xa3, 0, 0},
638 };
639 
640 static const struct reg_value ov5640_setting_720P_1280_720[] = {
641 	{0x3c07, 0x07, 0, 0},
642 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
643 	{0x3814, 0x31, 0, 0},
644 	{0x3815, 0x31, 0, 0},
645 	{0x3618, 0x00, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x64, 0, 0},
646 	{0x3709, 0x52, 0, 0}, {0x370c, 0x03, 0, 0}, {0x3a02, 0x02, 0, 0},
647 	{0x3a03, 0xe4, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0xbc, 0, 0},
648 	{0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x72, 0, 0}, {0x3a0e, 0x01, 0, 0},
649 	{0x3a0d, 0x02, 0, 0}, {0x3a14, 0x02, 0, 0}, {0x3a15, 0xe4, 0, 0},
650 	{0x4001, 0x02, 0, 0}, {0x4004, 0x02, 0, 0},
651 	{0x4407, 0x04, 0, 0}, {0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0},
652 	{0x3824, 0x04, 0, 0}, {0x5001, 0x83, 0, 0},
653 };
654 
655 static const struct reg_value ov5640_setting_1080P_1920_1080[] = {
656 	{0x3c07, 0x08, 0, 0},
657 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
658 	{0x3814, 0x11, 0, 0},
659 	{0x3815, 0x11, 0, 0},
660 	{0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0},
661 	{0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0},
662 	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
663 	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
664 	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
665 	{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0},
666 	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
667 	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 0},
668 	{0x3c07, 0x07, 0, 0}, {0x3c08, 0x00, 0, 0},
669 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
670 	{0x3612, 0x2b, 0, 0}, {0x3708, 0x64, 0, 0},
671 	{0x3a02, 0x04, 0, 0}, {0x3a03, 0x60, 0, 0}, {0x3a08, 0x01, 0, 0},
672 	{0x3a09, 0x50, 0, 0}, {0x3a0a, 0x01, 0, 0}, {0x3a0b, 0x18, 0, 0},
673 	{0x3a0e, 0x03, 0, 0}, {0x3a0d, 0x04, 0, 0}, {0x3a14, 0x04, 0, 0},
674 	{0x3a15, 0x60, 0, 0}, {0x4407, 0x04, 0, 0},
675 	{0x460b, 0x37, 0, 0}, {0x460c, 0x20, 0, 0}, {0x3824, 0x04, 0, 0},
676 	{0x4005, 0x1a, 0, 0},
677 };
678 
679 static const struct reg_value ov5640_setting_QSXGA_2592_1944[] = {
680 	{0x3c07, 0x08, 0, 0},
681 	{0x3c09, 0x1c, 0, 0}, {0x3c0a, 0x9c, 0, 0}, {0x3c0b, 0x40, 0, 0},
682 	{0x3814, 0x11, 0, 0},
683 	{0x3815, 0x11, 0, 0},
684 	{0x3618, 0x04, 0, 0}, {0x3612, 0x29, 0, 0}, {0x3708, 0x21, 0, 0},
685 	{0x3709, 0x12, 0, 0}, {0x370c, 0x00, 0, 0}, {0x3a02, 0x03, 0, 0},
686 	{0x3a03, 0xd8, 0, 0}, {0x3a08, 0x01, 0, 0}, {0x3a09, 0x27, 0, 0},
687 	{0x3a0a, 0x00, 0, 0}, {0x3a0b, 0xf6, 0, 0}, {0x3a0e, 0x03, 0, 0},
688 	{0x3a0d, 0x04, 0, 0}, {0x3a14, 0x03, 0, 0}, {0x3a15, 0xd8, 0, 0},
689 	{0x4001, 0x02, 0, 0}, {0x4004, 0x06, 0, 0},
690 	{0x4407, 0x04, 0, 0}, {0x460b, 0x35, 0, 0}, {0x460c, 0x22, 0, 0},
691 	{0x3824, 0x02, 0, 0}, {0x5001, 0x83, 0, 70},
692 };
693 
694 static const struct ov5640_mode_info ov5640_mode_data[OV5640_NUM_MODES] = {
695 	{
696 		/* 160x120 */
697 		.id		= OV5640_MODE_QQVGA_160_120,
698 		.dn_mode	= SUBSAMPLING,
699 		.pixel_rate	= OV5640_PIXEL_RATE_48M,
700 		.width		= 160,
701 		.height		= 120,
702 		.dvp_timings = {
703 			.analog_crop = {
704 				.left	= 0,
705 				.top	= 4,
706 				.width	= 2624,
707 				.height	= 1944,
708 			},
709 			.crop = {
710 				.left	= 16,
711 				.top	= 6,
712 				.width	= 160,
713 				.height	= 120,
714 			},
715 			.htot		= 1896,
716 			.vblank_def	= 864,
717 		},
718 		.csi2_timings = {
719 			/* Feed the full valid pixel array to the ISP. */
720 			.analog_crop = {
721 				.left	= OV5640_PIXEL_ARRAY_LEFT,
722 				.top	= OV5640_PIXEL_ARRAY_TOP,
723 				.width	= OV5640_PIXEL_ARRAY_WIDTH,
724 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
725 			},
726 			/* Maintain a minimum processing margin. */
727 			.crop = {
728 				.left	= 2,
729 				.top	= 4,
730 				.width	= 160,
731 				.height	= 120,
732 			},
733 			.htot		= 1600,
734 			.vblank_def	= 878,
735 		},
736 		.reg_data	= ov5640_setting_low_res,
737 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
738 		.max_fps	= OV5640_30_FPS,
739 		.def_fps	= OV5640_30_FPS
740 	}, {
741 		/* 176x144 */
742 		.id		= OV5640_MODE_QCIF_176_144,
743 		.dn_mode	= SUBSAMPLING,
744 		.pixel_rate	= OV5640_PIXEL_RATE_48M,
745 		.width		= 176,
746 		.height		= 144,
747 		.dvp_timings = {
748 			.analog_crop = {
749 				.left	= 0,
750 				.top	= 4,
751 				.width	= 2624,
752 				.height	= 1944,
753 			},
754 			.crop = {
755 				.left	= 16,
756 				.top	= 6,
757 				.width	= 176,
758 				.height	= 144,
759 			},
760 			.htot		= 1896,
761 			.vblank_def	= 840,
762 		},
763 		.csi2_timings = {
764 			/* Feed the full valid pixel array to the ISP. */
765 			.analog_crop = {
766 				.left	= OV5640_PIXEL_ARRAY_LEFT,
767 				.top	= OV5640_PIXEL_ARRAY_TOP,
768 				.width	= OV5640_PIXEL_ARRAY_WIDTH,
769 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
770 			},
771 			/* Maintain a minimum processing margin. */
772 			.crop = {
773 				.left	= 2,
774 				.top	= 4,
775 				.width	= 176,
776 				.height	= 144,
777 			},
778 			.htot		= 1600,
779 			.vblank_def	= 854,
780 		},
781 		.reg_data	= ov5640_setting_low_res,
782 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
783 		.max_fps	= OV5640_30_FPS,
784 		.def_fps	= OV5640_30_FPS
785 	}, {
786 		/* 320x240 */
787 		.id		= OV5640_MODE_QVGA_320_240,
788 		.dn_mode	= SUBSAMPLING,
789 		.width		= 320,
790 		.height		= 240,
791 		.pixel_rate	= OV5640_PIXEL_RATE_48M,
792 		.dvp_timings = {
793 			.analog_crop = {
794 				.left	= 0,
795 				.top	= 4,
796 				.width	= 2624,
797 				.height	= 1944,
798 			},
799 			.crop = {
800 				.left	= 16,
801 				.top	= 6,
802 				.width	= 320,
803 				.height	= 240,
804 			},
805 			.htot		= 1896,
806 			.vblank_def	= 744,
807 		},
808 		.csi2_timings = {
809 			/* Feed the full valid pixel array to the ISP. */
810 			.analog_crop = {
811 				.left	= OV5640_PIXEL_ARRAY_LEFT,
812 				.top	= OV5640_PIXEL_ARRAY_TOP,
813 				.width	= OV5640_PIXEL_ARRAY_WIDTH,
814 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
815 			},
816 			/* Maintain a minimum processing margin. */
817 			.crop = {
818 				.left	= 2,
819 				.top	= 4,
820 				.width	= 320,
821 				.height	= 240,
822 			},
823 			.htot		= 1600,
824 			.vblank_def	= 760,
825 		},
826 		.reg_data	= ov5640_setting_low_res,
827 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
828 		.max_fps	= OV5640_30_FPS,
829 		.def_fps	= OV5640_30_FPS
830 	}, {
831 		/* 640x480 */
832 		.id		= OV5640_MODE_VGA_640_480,
833 		.dn_mode	= SUBSAMPLING,
834 		.pixel_rate	= OV5640_PIXEL_RATE_48M,
835 		.width		= 640,
836 		.height		= 480,
837 		.dvp_timings = {
838 			.analog_crop = {
839 				.left	= 0,
840 				.top	= 4,
841 				.width	= 2624,
842 				.height	= 1944,
843 			},
844 			.crop = {
845 				.left	= 16,
846 				.top	= 6,
847 				.width	= 640,
848 				.height	= 480,
849 			},
850 			.htot		= 1896,
851 			.vblank_def	= 600,
852 		},
853 		.csi2_timings = {
854 			/* Feed the full valid pixel array to the ISP. */
855 			.analog_crop = {
856 				.left	= OV5640_PIXEL_ARRAY_LEFT,
857 				.top	= OV5640_PIXEL_ARRAY_TOP,
858 				.width	= OV5640_PIXEL_ARRAY_WIDTH,
859 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
860 			},
861 			/* Maintain a minimum processing margin. */
862 			.crop = {
863 				.left	= 2,
864 				.top	= 4,
865 				.width	= 640,
866 				.height	= 480,
867 			},
868 			.htot		= 1600,
869 			.vblank_def	= 520,
870 		},
871 		.reg_data	= ov5640_setting_low_res,
872 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
873 		.max_fps	= OV5640_60_FPS,
874 		.def_fps	= OV5640_30_FPS
875 	}, {
876 		/* 720x480 */
877 		.id		= OV5640_MODE_NTSC_720_480,
878 		.dn_mode	= SUBSAMPLING,
879 		.width		= 720,
880 		.height		= 480,
881 		.pixel_rate	= OV5640_PIXEL_RATE_96M,
882 		.dvp_timings = {
883 			.analog_crop = {
884 				.left	= 0,
885 				.top	= 4,
886 				.width	= 2624,
887 				.height	= 1944,
888 			},
889 			.crop = {
890 				.left	= 56,
891 				.top	= 60,
892 				.width	= 720,
893 				.height	= 480,
894 			},
895 			.htot		= 1896,
896 			.vblank_def	= 504,
897 		},
898 		.csi2_timings = {
899 			/* Feed the full valid pixel array to the ISP. */
900 			.analog_crop = {
901 				.left	= OV5640_PIXEL_ARRAY_LEFT,
902 				.top	= OV5640_PIXEL_ARRAY_TOP,
903 				.width	= OV5640_PIXEL_ARRAY_WIDTH,
904 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
905 			},
906 			.crop = {
907 				.left	= 56,
908 				.top	= 60,
909 				.width	= 720,
910 				.height	= 480,
911 			},
912 			.htot		= 1896,
913 			.vblank_def	= 1206,
914 		},
915 		.reg_data	= ov5640_setting_low_res,
916 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
917 		.max_fps	= OV5640_30_FPS,
918 		.def_fps	= OV5640_30_FPS
919 	}, {
920 		/* 720x576 */
921 		.id		= OV5640_MODE_PAL_720_576,
922 		.dn_mode	= SUBSAMPLING,
923 		.width		= 720,
924 		.height		= 576,
925 		.pixel_rate	= OV5640_PIXEL_RATE_96M,
926 		.dvp_timings = {
927 			.analog_crop = {
928 				.left	= 0,
929 				.top	= 4,
930 				.width	= 2624,
931 				.height	= 1944,
932 			},
933 			.crop = {
934 				.left	= 56,
935 				.top	= 6,
936 				.width	= 720,
937 				.height	= 576,
938 			},
939 			.htot		= 1896,
940 			.vblank_def	= 408,
941 		},
942 		.csi2_timings = {
943 			/* Feed the full valid pixel array to the ISP. */
944 			.analog_crop = {
945 				.left	= OV5640_PIXEL_ARRAY_LEFT,
946 				.top	= OV5640_PIXEL_ARRAY_TOP,
947 				.width	= OV5640_PIXEL_ARRAY_WIDTH,
948 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
949 			},
950 			.crop = {
951 				.left	= 56,
952 				.top	= 6,
953 				.width	= 720,
954 				.height	= 576,
955 			},
956 			.htot		= 1896,
957 			.vblank_def	= 1110,
958 		},
959 		.reg_data	= ov5640_setting_low_res,
960 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
961 		.max_fps	= OV5640_30_FPS,
962 		.def_fps	= OV5640_30_FPS
963 	}, {
964 		/* 1024x768 */
965 		.id		= OV5640_MODE_XGA_1024_768,
966 		.dn_mode	= SUBSAMPLING,
967 		.pixel_rate	= OV5640_PIXEL_RATE_96M,
968 		.width		= 1024,
969 		.height		= 768,
970 		.dvp_timings = {
971 			.analog_crop = {
972 				.left	= 0,
973 				.top	= 4,
974 				.width	= 2624,
975 				.height	= 1944,
976 			},
977 			.crop = {
978 				.left	= 16,
979 				.top	= 6,
980 				.width	= 1024,
981 				.height	= 768,
982 			},
983 			.htot		= 1896,
984 			.vblank_def	= 312,
985 		},
986 		.csi2_timings = {
987 			.analog_crop = {
988 				.left	= 0,
989 				.top	= 4,
990 				.width	= OV5640_NATIVE_WIDTH,
991 				.height	= OV5640_PIXEL_ARRAY_HEIGHT,
992 			},
993 			.crop = {
994 				.left	= 16,
995 				.top	= 6,
996 				.width	= 1024,
997 				.height	= 768,
998 			},
999 			.htot		= 1896,
1000 			.vblank_def	= 918,
1001 		},
1002 		.reg_data	= ov5640_setting_low_res,
1003 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_low_res),
1004 		.max_fps	= OV5640_30_FPS,
1005 		.def_fps	= OV5640_30_FPS
1006 	}, {
1007 		/* 1280x720 */
1008 		.id		= OV5640_MODE_720P_1280_720,
1009 		.dn_mode	= SUBSAMPLING,
1010 		.pixel_rate	= OV5640_PIXEL_RATE_124M,
1011 		.width		= 1280,
1012 		.height		= 720,
1013 		.dvp_timings = {
1014 			.analog_crop = {
1015 				.left	= 0,
1016 				.top	= 250,
1017 				.width	= 2624,
1018 				.height	= 1456,
1019 			},
1020 			.crop = {
1021 				.left	= 16,
1022 				.top	= 4,
1023 				.width	= 1280,
1024 				.height	= 720,
1025 			},
1026 			.htot		= 1892,
1027 			.vblank_def	= 20,
1028 		},
1029 		.csi2_timings = {
1030 			.analog_crop = {
1031 				.left	= 0,
1032 				.top	= 250,
1033 				.width	= 2624,
1034 				.height	= 1456,
1035 			},
1036 			.crop = {
1037 				.left	= 16,
1038 				.top	= 4,
1039 				.width	= 1280,
1040 				.height	= 720,
1041 			},
1042 			.htot		= 1600,
1043 			.vblank_def	= 560,
1044 		},
1045 		.reg_data	= ov5640_setting_720P_1280_720,
1046 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_720P_1280_720),
1047 		.max_fps	= OV5640_30_FPS,
1048 		.def_fps	= OV5640_30_FPS
1049 	}, {
1050 		/* 1920x1080 */
1051 		.id		= OV5640_MODE_1080P_1920_1080,
1052 		.dn_mode	= SCALING,
1053 		.pixel_rate	= OV5640_PIXEL_RATE_148M,
1054 		.width		= 1920,
1055 		.height		= 1080,
1056 		.dvp_timings = {
1057 			.analog_crop = {
1058 				.left	= 336,
1059 				.top	= 434,
1060 				.width	= 1952,
1061 				.height	= 1088,
1062 			},
1063 			.crop = {
1064 				.left	= 16,
1065 				.top	= 4,
1066 				.width	= 1920,
1067 				.height	= 1080,
1068 			},
1069 			.htot		= 2500,
1070 			.vblank_def	= 40,
1071 		},
1072 		.csi2_timings = {
1073 			/* Crop the full valid pixel array in the center. */
1074 			.analog_crop = {
1075 				.left	= 336,
1076 				.top	= 434,
1077 				.width	= 1952,
1078 				.height	= 1088,
1079 			},
1080 			/* Maintain a larger processing margins. */
1081 			.crop = {
1082 				.left	= 16,
1083 				.top	= 4,
1084 				.width	= 1920,
1085 				.height	= 1080,
1086 			},
1087 			.htot		= 2234,
1088 			.vblank_def	= 24,
1089 		},
1090 		.reg_data	= ov5640_setting_1080P_1920_1080,
1091 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_1080P_1920_1080),
1092 		.max_fps	= OV5640_30_FPS,
1093 		.def_fps	= OV5640_30_FPS
1094 	}, {
1095 		/* 2592x1944 */
1096 		.id		= OV5640_MODE_QSXGA_2592_1944,
1097 		.dn_mode	= SCALING,
1098 		.pixel_rate	= OV5640_PIXEL_RATE_168M,
1099 		.width		= OV5640_PIXEL_ARRAY_WIDTH,
1100 		.height		= OV5640_PIXEL_ARRAY_HEIGHT,
1101 		.dvp_timings = {
1102 			.analog_crop = {
1103 				.left	= 0,
1104 				.top	= 0,
1105 				.width	= 2624,
1106 				.height	= 1952,
1107 			},
1108 			.crop = {
1109 				.left	= 16,
1110 				.top	= 4,
1111 				.width	= 2592,
1112 				.height	= 1944,
1113 			},
1114 			.htot		= 2844,
1115 			.vblank_def	= 24,
1116 		},
1117 		.csi2_timings = {
1118 			/* Give more processing margin to full resolution. */
1119 			.analog_crop = {
1120 				.left	= 0,
1121 				.top	= 0,
1122 				.width	= OV5640_NATIVE_WIDTH,
1123 				.height	= 1952,
1124 			},
1125 			.crop = {
1126 				.left	= 16,
1127 				.top	= 4,
1128 				.width	= 2592,
1129 				.height	= 1944,
1130 			},
1131 			.htot		= 2844,
1132 			.vblank_def	= 24,
1133 		},
1134 		.reg_data	= ov5640_setting_QSXGA_2592_1944,
1135 		.reg_data_size	= ARRAY_SIZE(ov5640_setting_QSXGA_2592_1944),
1136 		.max_fps	= OV5640_15_FPS,
1137 		.def_fps	= OV5640_15_FPS
1138 	},
1139 };
1140 
1141 static const struct ov5640_timings *
1142 ov5640_timings(const struct ov5640_dev *sensor,
1143 	       const struct ov5640_mode_info *mode)
1144 {
1145 	if (ov5640_is_csi2(sensor))
1146 		return &mode->csi2_timings;
1147 
1148 	return &mode->dvp_timings;
1149 }
1150 
1151 static int ov5640_init_slave_id(struct ov5640_dev *sensor)
1152 {
1153 	struct i2c_client *client = sensor->i2c_client;
1154 	struct i2c_msg msg;
1155 	u8 buf[3];
1156 	int ret;
1157 
1158 	if (client->addr == OV5640_DEFAULT_SLAVE_ID)
1159 		return 0;
1160 
1161 	buf[0] = OV5640_REG_SLAVE_ID >> 8;
1162 	buf[1] = OV5640_REG_SLAVE_ID & 0xff;
1163 	buf[2] = client->addr << 1;
1164 
1165 	msg.addr = OV5640_DEFAULT_SLAVE_ID;
1166 	msg.flags = 0;
1167 	msg.buf = buf;
1168 	msg.len = sizeof(buf);
1169 
1170 	ret = i2c_transfer(client->adapter, &msg, 1);
1171 	if (ret < 0) {
1172 		dev_err(&client->dev, "%s: failed with %d\n", __func__, ret);
1173 		return ret;
1174 	}
1175 
1176 	return 0;
1177 }
1178 
1179 static int ov5640_write_reg(struct ov5640_dev *sensor, u16 reg, u8 val)
1180 {
1181 	struct i2c_client *client = sensor->i2c_client;
1182 	struct i2c_msg msg;
1183 	u8 buf[3];
1184 	int ret;
1185 
1186 	buf[0] = reg >> 8;
1187 	buf[1] = reg & 0xff;
1188 	buf[2] = val;
1189 
1190 	msg.addr = client->addr;
1191 	msg.flags = client->flags;
1192 	msg.buf = buf;
1193 	msg.len = sizeof(buf);
1194 
1195 	ret = i2c_transfer(client->adapter, &msg, 1);
1196 	if (ret < 0) {
1197 		dev_err(&client->dev, "%s: error: reg=%x, val=%x\n",
1198 			__func__, reg, val);
1199 		return ret;
1200 	}
1201 
1202 	return 0;
1203 }
1204 
1205 static int ov5640_read_reg(struct ov5640_dev *sensor, u16 reg, u8 *val)
1206 {
1207 	struct i2c_client *client = sensor->i2c_client;
1208 	struct i2c_msg msg[2];
1209 	u8 buf[2];
1210 	int ret;
1211 
1212 	buf[0] = reg >> 8;
1213 	buf[1] = reg & 0xff;
1214 
1215 	msg[0].addr = client->addr;
1216 	msg[0].flags = client->flags;
1217 	msg[0].buf = buf;
1218 	msg[0].len = sizeof(buf);
1219 
1220 	msg[1].addr = client->addr;
1221 	msg[1].flags = client->flags | I2C_M_RD;
1222 	msg[1].buf = buf;
1223 	msg[1].len = 1;
1224 
1225 	ret = i2c_transfer(client->adapter, msg, 2);
1226 	if (ret < 0) {
1227 		dev_err(&client->dev, "%s: error: reg=%x\n",
1228 			__func__, reg);
1229 		return ret;
1230 	}
1231 
1232 	*val = buf[0];
1233 	return 0;
1234 }
1235 
1236 static int ov5640_read_reg16(struct ov5640_dev *sensor, u16 reg, u16 *val)
1237 {
1238 	u8 hi, lo;
1239 	int ret;
1240 
1241 	ret = ov5640_read_reg(sensor, reg, &hi);
1242 	if (ret)
1243 		return ret;
1244 	ret = ov5640_read_reg(sensor, reg + 1, &lo);
1245 	if (ret)
1246 		return ret;
1247 
1248 	*val = ((u16)hi << 8) | (u16)lo;
1249 	return 0;
1250 }
1251 
1252 static int ov5640_write_reg16(struct ov5640_dev *sensor, u16 reg, u16 val)
1253 {
1254 	int ret;
1255 
1256 	ret = ov5640_write_reg(sensor, reg, val >> 8);
1257 	if (ret)
1258 		return ret;
1259 
1260 	return ov5640_write_reg(sensor, reg + 1, val & 0xff);
1261 }
1262 
1263 static int ov5640_mod_reg(struct ov5640_dev *sensor, u16 reg,
1264 			  u8 mask, u8 val)
1265 {
1266 	u8 readval;
1267 	int ret;
1268 
1269 	ret = ov5640_read_reg(sensor, reg, &readval);
1270 	if (ret)
1271 		return ret;
1272 
1273 	readval &= ~mask;
1274 	val &= mask;
1275 	val |= readval;
1276 
1277 	return ov5640_write_reg(sensor, reg, val);
1278 }
1279 
1280 /*
1281  * After trying the various combinations, reading various
1282  * documentations spread around the net, and from the various
1283  * feedback, the clock tree is probably as follows:
1284  *
1285  *   +--------------+
1286  *   |  Ext. Clock  |
1287  *   +-+------------+
1288  *     |  +----------+
1289  *     +->|   PLL1   | - reg 0x3036, for the multiplier
1290  *        +-+--------+ - reg 0x3037, bits 0-3 for the pre-divider
1291  *          |  +--------------+
1292  *          +->| System Clock |  - reg 0x3035, bits 4-7
1293  *             +-+------------+
1294  *               |  +--------------+
1295  *               +->| MIPI Divider | - reg 0x3035, bits 0-3
1296  *               |  +-+------------+
1297  *               |    +----------------> MIPI SCLK
1298  *               |    +  +-----+
1299  *               |    +->| / 2 |-------> MIPI BIT CLK
1300  *               |       +-----+
1301  *               |  +--------------+
1302  *               +->| PLL Root Div | - reg 0x3037, bit 4
1303  *                  +-+------------+
1304  *                    |  +---------+
1305  *                    +->| Bit Div | - reg 0x3034, bits 0-3
1306  *                       +-+-------+
1307  *                         |  +-------------+
1308  *                         +->| SCLK Div    | - reg 0x3108, bits 0-1
1309  *                         |  +-+-----------+
1310  *                         |    +---------------> SCLK
1311  *                         |  +-------------+
1312  *                         +->| SCLK 2X Div | - reg 0x3108, bits 2-3
1313  *                         |  +-+-----------+
1314  *                         |    +---------------> SCLK 2X
1315  *                         |  +-------------+
1316  *                         +->| PCLK Div    | - reg 0x3108, bits 4-5
1317  *                            ++------------+
1318  *                             +  +-----------+
1319  *                             +->|   P_DIV   | - reg 0x3035, bits 0-3
1320  *                                +-----+-----+
1321  *                                       +------------> PCLK
1322  *
1323  * There seems to be also constraints:
1324  *  - the PLL pre-divider output rate should be in the 4-27MHz range
1325  *  - the PLL multiplier output rate should be in the 500-1000MHz range
1326  *  - PCLK >= SCLK * 2 in YUV, >= SCLK in Raw or JPEG
1327  */
1328 
1329 /*
1330  * This is supposed to be ranging from 1 to 8, but the value is always
1331  * set to 3 in the vendor kernels.
1332  */
1333 #define OV5640_PLL_PREDIV	3
1334 
1335 #define OV5640_PLL_MULT_MIN	4
1336 #define OV5640_PLL_MULT_MAX	252
1337 
1338 /*
1339  * This is supposed to be ranging from 1 to 16, but the value is
1340  * always set to either 1 or 2 in the vendor kernels.
1341  */
1342 #define OV5640_SYSDIV_MIN	1
1343 #define OV5640_SYSDIV_MAX	16
1344 
1345 /*
1346  * This is supposed to be ranging from 1 to 2, but the value is always
1347  * set to 2 in the vendor kernels.
1348  */
1349 #define OV5640_PLL_ROOT_DIV			2
1350 #define OV5640_PLL_CTRL3_PLL_ROOT_DIV_2		BIT(4)
1351 
1352 /*
1353  * We only supports 8-bit formats at the moment
1354  */
1355 #define OV5640_BIT_DIV				2
1356 #define OV5640_PLL_CTRL0_MIPI_MODE_8BIT		0x08
1357 
1358 /*
1359  * This is supposed to be ranging from 1 to 8, but the value is always
1360  * set to 2 in the vendor kernels.
1361  */
1362 #define OV5640_SCLK_ROOT_DIV	2
1363 
1364 /*
1365  * This is hardcoded so that the consistency is maintained between SCLK and
1366  * SCLK 2x.
1367  */
1368 #define OV5640_SCLK2X_ROOT_DIV (OV5640_SCLK_ROOT_DIV / 2)
1369 
1370 /*
1371  * This is supposed to be ranging from 1 to 8, but the value is always
1372  * set to 1 in the vendor kernels.
1373  */
1374 #define OV5640_PCLK_ROOT_DIV			1
1375 #define OV5640_PLL_SYS_ROOT_DIVIDER_BYPASS	0x00
1376 
1377 static unsigned long ov5640_compute_sys_clk(struct ov5640_dev *sensor,
1378 					    u8 pll_prediv, u8 pll_mult,
1379 					    u8 sysdiv)
1380 {
1381 	unsigned long sysclk = sensor->xclk_freq / pll_prediv * pll_mult;
1382 
1383 	/* PLL1 output cannot exceed 1GHz. */
1384 	if (sysclk / 1000000 > 1000)
1385 		return 0;
1386 
1387 	return sysclk / sysdiv;
1388 }
1389 
1390 static unsigned long ov5640_calc_sys_clk(struct ov5640_dev *sensor,
1391 					 unsigned long rate,
1392 					 u8 *pll_prediv, u8 *pll_mult,
1393 					 u8 *sysdiv)
1394 {
1395 	unsigned long best = ~0;
1396 	u8 best_sysdiv = 1, best_mult = 1;
1397 	u8 _sysdiv, _pll_mult;
1398 
1399 	for (_sysdiv = OV5640_SYSDIV_MIN;
1400 	     _sysdiv <= OV5640_SYSDIV_MAX;
1401 	     _sysdiv++) {
1402 		for (_pll_mult = OV5640_PLL_MULT_MIN;
1403 		     _pll_mult <= OV5640_PLL_MULT_MAX;
1404 		     _pll_mult++) {
1405 			unsigned long _rate;
1406 
1407 			/*
1408 			 * The PLL multiplier cannot be odd if above
1409 			 * 127.
1410 			 */
1411 			if (_pll_mult > 127 && (_pll_mult % 2))
1412 				continue;
1413 
1414 			_rate = ov5640_compute_sys_clk(sensor,
1415 						       OV5640_PLL_PREDIV,
1416 						       _pll_mult, _sysdiv);
1417 
1418 			/*
1419 			 * We have reached the maximum allowed PLL1 output,
1420 			 * increase sysdiv.
1421 			 */
1422 			if (!_rate)
1423 				break;
1424 
1425 			/*
1426 			 * Prefer rates above the expected clock rate than
1427 			 * below, even if that means being less precise.
1428 			 */
1429 			if (_rate < rate)
1430 				continue;
1431 
1432 			if (abs(rate - _rate) < abs(rate - best)) {
1433 				best = _rate;
1434 				best_sysdiv = _sysdiv;
1435 				best_mult = _pll_mult;
1436 			}
1437 
1438 			if (_rate == rate)
1439 				goto out;
1440 		}
1441 	}
1442 
1443 out:
1444 	*sysdiv = best_sysdiv;
1445 	*pll_prediv = OV5640_PLL_PREDIV;
1446 	*pll_mult = best_mult;
1447 
1448 	return best;
1449 }
1450 
1451 /*
1452  * ov5640_set_mipi_pclk() - Calculate the clock tree configuration values
1453  *			    for the MIPI CSI-2 output.
1454  */
1455 static int ov5640_set_mipi_pclk(struct ov5640_dev *sensor)
1456 {
1457 	u8 bit_div, mipi_div, pclk_div, sclk_div, sclk2x_div, root_div;
1458 	u8 prediv, mult, sysdiv;
1459 	unsigned long link_freq;
1460 	unsigned long sysclk;
1461 	u8 pclk_period;
1462 	u32 sample_rate;
1463 	u32 num_lanes;
1464 	int ret;
1465 
1466 	/* Use the link freq computed at ov5640_update_pixel_rate() time. */
1467 	link_freq = sensor->current_link_freq;
1468 
1469 	/*
1470 	 * - mipi_div - Additional divider for the MIPI lane clock.
1471 	 *
1472 	 * Higher link frequencies would make sysclk > 1GHz.
1473 	 * Keep the sysclk low and do not divide in the MIPI domain.
1474 	 */
1475 	if (link_freq > OV5640_LINK_RATE_MAX)
1476 		mipi_div = 1;
1477 	else
1478 		mipi_div = 2;
1479 
1480 	sysclk = link_freq * mipi_div;
1481 	ov5640_calc_sys_clk(sensor, sysclk, &prediv, &mult, &sysdiv);
1482 
1483 	/*
1484 	 * Adjust PLL parameters to maintain the MIPI_SCLK-to-PCLK ratio.
1485 	 *
1486 	 * - root_div = 2 (fixed)
1487 	 * - bit_div : MIPI 8-bit = 2; MIPI 10-bit = 2.5
1488 	 * - pclk_div = 1 (fixed)
1489 	 * - p_div  = (2 lanes ? mipi_div : 2 * mipi_div)
1490 	 *
1491 	 * This results in the following MIPI_SCLK depending on the number
1492 	 * of lanes:
1493 	 *
1494 	 * - 2 lanes: MIPI_SCLK = (4 or 5) * PCLK
1495 	 * - 1 lanes: MIPI_SCLK = (8 or 10) * PCLK
1496 	 */
1497 	root_div = OV5640_PLL_CTRL3_PLL_ROOT_DIV_2;
1498 	bit_div =  OV5640_PLL_CTRL0_MIPI_MODE_8BIT;
1499 	pclk_div = ilog2(OV5640_PCLK_ROOT_DIV);
1500 
1501 	/*
1502 	 * Scaler clock:
1503 	 * - YUV: PCLK >= 2 * SCLK
1504 	 * - RAW or JPEG: PCLK >= SCLK
1505 	 * - sclk2x_div = sclk_div / 2
1506 	 */
1507 	sclk_div = ilog2(OV5640_SCLK_ROOT_DIV);
1508 	sclk2x_div = ilog2(OV5640_SCLK2X_ROOT_DIV);
1509 
1510 	/*
1511 	 * Set the pixel clock period expressed in ns with 1-bit decimal
1512 	 * (0x01=0.5ns).
1513 	 *
1514 	 * The register is very briefly documented. In the OV5645 datasheet it
1515 	 * is described as (2 * pclk period), and from testing it seems the
1516 	 * actual definition is 2 * 8-bit sample period.
1517 	 *
1518 	 * 2 * sample_period = (mipi_clk * 2 * num_lanes / bpp) * (bpp / 8) / 2
1519 	 */
1520 	num_lanes = sensor->ep.bus.mipi_csi2.num_data_lanes;
1521 	sample_rate = (link_freq * mipi_div * num_lanes * 2) / 16;
1522 	pclk_period = 2000000000UL / sample_rate;
1523 
1524 	/* Program the clock tree registers. */
1525 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0, 0x0f, bit_div);
1526 	if (ret)
1527 		return ret;
1528 
1529 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1, 0xff,
1530 			     (sysdiv << 4) | mipi_div);
1531 	if (ret)
1532 		return ret;
1533 
1534 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2, 0xff, mult);
1535 	if (ret)
1536 		return ret;
1537 
1538 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3, 0x1f,
1539 			     root_div | prediv);
1540 	if (ret)
1541 		return ret;
1542 
1543 	ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
1544 			     (pclk_div << 4) | (sclk2x_div << 2) | sclk_div);
1545 	if (ret)
1546 		return ret;
1547 
1548 	return ov5640_write_reg(sensor, OV5640_REG_PCLK_PERIOD, pclk_period);
1549 }
1550 
1551 static u32 ov5640_calc_pixel_rate(struct ov5640_dev *sensor)
1552 {
1553 	const struct ov5640_mode_info *mode = sensor->current_mode;
1554 	const struct ov5640_timings *timings = &mode->dvp_timings;
1555 	u32 rate;
1556 
1557 	rate = timings->htot * (timings->crop.height + timings->vblank_def);
1558 	rate *= ov5640_framerates[sensor->current_fr];
1559 
1560 	return rate;
1561 }
1562 
1563 static unsigned long ov5640_calc_pclk(struct ov5640_dev *sensor,
1564 				      unsigned long rate,
1565 				      u8 *pll_prediv, u8 *pll_mult, u8 *sysdiv,
1566 				      u8 *pll_rdiv, u8 *bit_div, u8 *pclk_div)
1567 {
1568 	unsigned long _rate = rate * OV5640_PLL_ROOT_DIV * OV5640_BIT_DIV *
1569 				OV5640_PCLK_ROOT_DIV;
1570 
1571 	_rate = ov5640_calc_sys_clk(sensor, _rate, pll_prediv, pll_mult,
1572 				    sysdiv);
1573 	*pll_rdiv = OV5640_PLL_ROOT_DIV;
1574 	*bit_div = OV5640_BIT_DIV;
1575 	*pclk_div = OV5640_PCLK_ROOT_DIV;
1576 
1577 	return _rate / *pll_rdiv / *bit_div / *pclk_div;
1578 }
1579 
1580 static int ov5640_set_dvp_pclk(struct ov5640_dev *sensor)
1581 {
1582 	u8 prediv, mult, sysdiv, pll_rdiv, bit_div, pclk_div;
1583 	u32 rate;
1584 	int ret;
1585 
1586 	rate = ov5640_calc_pixel_rate(sensor);
1587 	rate *= ov5640_code_to_bpp(sensor, sensor->fmt.code);
1588 	rate /= sensor->ep.bus.parallel.bus_width;
1589 
1590 	ov5640_calc_pclk(sensor, rate, &prediv, &mult, &sysdiv, &pll_rdiv,
1591 			 &bit_div, &pclk_div);
1592 
1593 	if (bit_div == 2)
1594 		bit_div = 8;
1595 
1596 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL0,
1597 			     0x0f, bit_div);
1598 	if (ret)
1599 		return ret;
1600 
1601 	/*
1602 	 * We need to set sysdiv according to the clock, and to clear
1603 	 * the MIPI divider.
1604 	 */
1605 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL1,
1606 			     0xff, sysdiv << 4);
1607 	if (ret)
1608 		return ret;
1609 
1610 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL2,
1611 			     0xff, mult);
1612 	if (ret)
1613 		return ret;
1614 
1615 	ret = ov5640_mod_reg(sensor, OV5640_REG_SC_PLL_CTRL3,
1616 			     0x1f, prediv | ((pll_rdiv - 1) << 4));
1617 	if (ret)
1618 		return ret;
1619 
1620 	return ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x30,
1621 			      (ilog2(pclk_div) << 4));
1622 }
1623 
1624 /* set JPEG framing sizes */
1625 static int ov5640_set_jpeg_timings(struct ov5640_dev *sensor,
1626 				   const struct ov5640_mode_info *mode)
1627 {
1628 	int ret;
1629 
1630 	/*
1631 	 * compression mode 3 timing
1632 	 *
1633 	 * Data is transmitted with programmable width (VFIFO_HSIZE).
1634 	 * No padding done. Last line may have less data. Varying
1635 	 * number of lines per frame, depending on amount of data.
1636 	 */
1637 	ret = ov5640_mod_reg(sensor, OV5640_REG_JPG_MODE_SELECT, 0x7, 0x3);
1638 	if (ret < 0)
1639 		return ret;
1640 
1641 	ret = ov5640_write_reg16(sensor, OV5640_REG_VFIFO_HSIZE, mode->width);
1642 	if (ret < 0)
1643 		return ret;
1644 
1645 	return ov5640_write_reg16(sensor, OV5640_REG_VFIFO_VSIZE, mode->height);
1646 }
1647 
1648 /* download ov5640 settings to sensor through i2c */
1649 static int ov5640_set_timings(struct ov5640_dev *sensor,
1650 			      const struct ov5640_mode_info *mode)
1651 {
1652 	const struct ov5640_timings *timings;
1653 	const struct v4l2_rect *analog_crop;
1654 	const struct v4l2_rect *crop;
1655 	int ret;
1656 
1657 	if (sensor->fmt.code == MEDIA_BUS_FMT_JPEG_1X8) {
1658 		ret = ov5640_set_jpeg_timings(sensor, mode);
1659 		if (ret < 0)
1660 			return ret;
1661 	}
1662 
1663 	timings = ov5640_timings(sensor, mode);
1664 	analog_crop = &timings->analog_crop;
1665 	crop = &timings->crop;
1666 
1667 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HS,
1668 				 analog_crop->left);
1669 	if (ret < 0)
1670 		return ret;
1671 
1672 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VS,
1673 				 analog_crop->top);
1674 	if (ret < 0)
1675 		return ret;
1676 
1677 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HW,
1678 				 analog_crop->left + analog_crop->width - 1);
1679 	if (ret < 0)
1680 		return ret;
1681 
1682 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VH,
1683 				 analog_crop->top + analog_crop->height - 1);
1684 	if (ret < 0)
1685 		return ret;
1686 
1687 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HOFFS, crop->left);
1688 	if (ret < 0)
1689 		return ret;
1690 
1691 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VOFFS, crop->top);
1692 	if (ret < 0)
1693 		return ret;
1694 
1695 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPHO, mode->width);
1696 	if (ret < 0)
1697 		return ret;
1698 
1699 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_DVPVO, mode->height);
1700 	if (ret < 0)
1701 		return ret;
1702 
1703 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_HTS, timings->htot);
1704 	if (ret < 0)
1705 		return ret;
1706 
1707 	ret = ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS,
1708 				 mode->height + timings->vblank_def);
1709 	if (ret < 0)
1710 		return ret;
1711 
1712 	return 0;
1713 }
1714 
1715 static void ov5640_load_regs(struct ov5640_dev *sensor,
1716 			     const struct reg_value *regs, unsigned int regnum)
1717 {
1718 	unsigned int i;
1719 	u32 delay_ms;
1720 	u16 reg_addr;
1721 	u8 mask, val;
1722 	int ret = 0;
1723 
1724 	for (i = 0; i < regnum; ++i, ++regs) {
1725 		delay_ms = regs->delay_ms;
1726 		reg_addr = regs->reg_addr;
1727 		val = regs->val;
1728 		mask = regs->mask;
1729 
1730 		/* remain in power down mode for DVP */
1731 		if (regs->reg_addr == OV5640_REG_SYS_CTRL0 &&
1732 		    val == OV5640_REG_SYS_CTRL0_SW_PWUP &&
1733 		    !ov5640_is_csi2(sensor))
1734 			continue;
1735 
1736 		if (mask)
1737 			ret = ov5640_mod_reg(sensor, reg_addr, mask, val);
1738 		else
1739 			ret = ov5640_write_reg(sensor, reg_addr, val);
1740 		if (ret)
1741 			break;
1742 
1743 		if (delay_ms)
1744 			usleep_range(1000 * delay_ms, 1000 * delay_ms + 100);
1745 	}
1746 }
1747 
1748 static int ov5640_set_autoexposure(struct ov5640_dev *sensor, bool on)
1749 {
1750 	return ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL,
1751 			      BIT(0), on ? 0 : BIT(0));
1752 }
1753 
1754 /* read exposure, in number of line periods */
1755 static int ov5640_get_exposure(struct ov5640_dev *sensor)
1756 {
1757 	int exp, ret;
1758 	u8 temp;
1759 
1760 	ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_HI, &temp);
1761 	if (ret)
1762 		return ret;
1763 	exp = ((int)temp & 0x0f) << 16;
1764 	ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_MED, &temp);
1765 	if (ret)
1766 		return ret;
1767 	exp |= ((int)temp << 8);
1768 	ret = ov5640_read_reg(sensor, OV5640_REG_AEC_PK_EXPOSURE_LO, &temp);
1769 	if (ret)
1770 		return ret;
1771 	exp |= (int)temp;
1772 
1773 	return exp >> 4;
1774 }
1775 
1776 /* write exposure, given number of line periods */
1777 static int ov5640_set_exposure(struct ov5640_dev *sensor, u32 exposure)
1778 {
1779 	int ret;
1780 
1781 	exposure <<= 4;
1782 
1783 	ret = ov5640_write_reg(sensor,
1784 			       OV5640_REG_AEC_PK_EXPOSURE_LO,
1785 			       exposure & 0xff);
1786 	if (ret)
1787 		return ret;
1788 	ret = ov5640_write_reg(sensor,
1789 			       OV5640_REG_AEC_PK_EXPOSURE_MED,
1790 			       (exposure >> 8) & 0xff);
1791 	if (ret)
1792 		return ret;
1793 	return ov5640_write_reg(sensor,
1794 				OV5640_REG_AEC_PK_EXPOSURE_HI,
1795 				(exposure >> 16) & 0x0f);
1796 }
1797 
1798 static int ov5640_get_gain(struct ov5640_dev *sensor)
1799 {
1800 	u16 gain;
1801 	int ret;
1802 
1803 	ret = ov5640_read_reg16(sensor, OV5640_REG_AEC_PK_REAL_GAIN, &gain);
1804 	if (ret)
1805 		return ret;
1806 
1807 	return gain & 0x3ff;
1808 }
1809 
1810 static int ov5640_set_gain(struct ov5640_dev *sensor, int gain)
1811 {
1812 	return ov5640_write_reg16(sensor, OV5640_REG_AEC_PK_REAL_GAIN,
1813 				  (u16)gain & 0x3ff);
1814 }
1815 
1816 static int ov5640_set_autogain(struct ov5640_dev *sensor, bool on)
1817 {
1818 	return ov5640_mod_reg(sensor, OV5640_REG_AEC_PK_MANUAL,
1819 			      BIT(1), on ? 0 : BIT(1));
1820 }
1821 
1822 static int ov5640_set_stream_dvp(struct ov5640_dev *sensor, bool on)
1823 {
1824 	return ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0, on ?
1825 				OV5640_REG_SYS_CTRL0_SW_PWUP :
1826 				OV5640_REG_SYS_CTRL0_SW_PWDN);
1827 }
1828 
1829 static int ov5640_set_stream_mipi(struct ov5640_dev *sensor, bool on)
1830 {
1831 	int ret;
1832 
1833 	/*
1834 	 * Enable/disable the MIPI interface
1835 	 *
1836 	 * 0x300e = on ? 0x45 : 0x40
1837 	 *
1838 	 * FIXME: the sensor manual (version 2.03) reports
1839 	 * [7:5] = 000  : 1 data lane mode
1840 	 * [7:5] = 001  : 2 data lanes mode
1841 	 * But this settings do not work, while the following ones
1842 	 * have been validated for 2 data lanes mode.
1843 	 *
1844 	 * [7:5] = 010	: 2 data lanes mode
1845 	 * [4] = 0	: Power up MIPI HS Tx
1846 	 * [3] = 0	: Power up MIPI LS Rx
1847 	 * [2] = 1/0	: MIPI interface enable/disable
1848 	 * [1:0] = 01/00: FIXME: 'debug'
1849 	 */
1850 	ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00,
1851 			       on ? 0x45 : 0x40);
1852 	if (ret)
1853 		return ret;
1854 
1855 	return ov5640_write_reg(sensor, OV5640_REG_FRAME_CTRL01,
1856 				on ? 0x00 : 0x0f);
1857 }
1858 
1859 static int ov5640_get_sysclk(struct ov5640_dev *sensor)
1860 {
1861 	 /* calculate sysclk */
1862 	u32 xvclk = sensor->xclk_freq / 10000;
1863 	u32 multiplier, prediv, VCO, sysdiv, pll_rdiv;
1864 	u32 sclk_rdiv_map[] = {1, 2, 4, 8};
1865 	u32 bit_div2x = 1, sclk_rdiv, sysclk;
1866 	u8 temp1, temp2;
1867 	int ret;
1868 
1869 	ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL0, &temp1);
1870 	if (ret)
1871 		return ret;
1872 	temp2 = temp1 & 0x0f;
1873 	if (temp2 == 8 || temp2 == 10)
1874 		bit_div2x = temp2 / 2;
1875 
1876 	ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL1, &temp1);
1877 	if (ret)
1878 		return ret;
1879 	sysdiv = temp1 >> 4;
1880 	if (sysdiv == 0)
1881 		sysdiv = 16;
1882 
1883 	ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL2, &temp1);
1884 	if (ret)
1885 		return ret;
1886 	multiplier = temp1;
1887 
1888 	ret = ov5640_read_reg(sensor, OV5640_REG_SC_PLL_CTRL3, &temp1);
1889 	if (ret)
1890 		return ret;
1891 	prediv = temp1 & 0x0f;
1892 	pll_rdiv = ((temp1 >> 4) & 0x01) + 1;
1893 
1894 	ret = ov5640_read_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, &temp1);
1895 	if (ret)
1896 		return ret;
1897 	temp2 = temp1 & 0x03;
1898 	sclk_rdiv = sclk_rdiv_map[temp2];
1899 
1900 	if (!prediv || !sysdiv || !pll_rdiv || !bit_div2x)
1901 		return -EINVAL;
1902 
1903 	VCO = xvclk * multiplier / prediv;
1904 
1905 	sysclk = VCO / sysdiv / pll_rdiv * 2 / bit_div2x / sclk_rdiv;
1906 
1907 	return sysclk;
1908 }
1909 
1910 static int ov5640_set_night_mode(struct ov5640_dev *sensor)
1911 {
1912 	 /* read HTS from register settings */
1913 	u8 mode;
1914 	int ret;
1915 
1916 	ret = ov5640_read_reg(sensor, OV5640_REG_AEC_CTRL00, &mode);
1917 	if (ret)
1918 		return ret;
1919 	mode &= 0xfb;
1920 	return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL00, mode);
1921 }
1922 
1923 static int ov5640_get_hts(struct ov5640_dev *sensor)
1924 {
1925 	/* read HTS from register settings */
1926 	u16 hts;
1927 	int ret;
1928 
1929 	ret = ov5640_read_reg16(sensor, OV5640_REG_TIMING_HTS, &hts);
1930 	if (ret)
1931 		return ret;
1932 	return hts;
1933 }
1934 
1935 static int ov5640_get_vts(struct ov5640_dev *sensor)
1936 {
1937 	u16 vts;
1938 	int ret;
1939 
1940 	ret = ov5640_read_reg16(sensor, OV5640_REG_TIMING_VTS, &vts);
1941 	if (ret)
1942 		return ret;
1943 	return vts;
1944 }
1945 
1946 static int ov5640_set_vts(struct ov5640_dev *sensor, int vts)
1947 {
1948 	return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS, vts);
1949 }
1950 
1951 static int ov5640_get_light_freq(struct ov5640_dev *sensor)
1952 {
1953 	/* get banding filter value */
1954 	int ret, light_freq = 0;
1955 	u8 temp, temp1;
1956 
1957 	ret = ov5640_read_reg(sensor, OV5640_REG_HZ5060_CTRL01, &temp);
1958 	if (ret)
1959 		return ret;
1960 
1961 	if (temp & 0x80) {
1962 		/* manual */
1963 		ret = ov5640_read_reg(sensor, OV5640_REG_HZ5060_CTRL00,
1964 				      &temp1);
1965 		if (ret)
1966 			return ret;
1967 		if (temp1 & 0x04) {
1968 			/* 50Hz */
1969 			light_freq = 50;
1970 		} else {
1971 			/* 60Hz */
1972 			light_freq = 60;
1973 		}
1974 	} else {
1975 		/* auto */
1976 		ret = ov5640_read_reg(sensor, OV5640_REG_SIGMADELTA_CTRL0C,
1977 				      &temp1);
1978 		if (ret)
1979 			return ret;
1980 
1981 		if (temp1 & 0x01) {
1982 			/* 50Hz */
1983 			light_freq = 50;
1984 		} else {
1985 			/* 60Hz */
1986 		}
1987 	}
1988 
1989 	return light_freq;
1990 }
1991 
1992 static int ov5640_set_bandingfilter(struct ov5640_dev *sensor)
1993 {
1994 	u32 band_step60, max_band60, band_step50, max_band50, prev_vts;
1995 	int ret;
1996 
1997 	/* read preview PCLK */
1998 	ret = ov5640_get_sysclk(sensor);
1999 	if (ret < 0)
2000 		return ret;
2001 	if (ret == 0)
2002 		return -EINVAL;
2003 	sensor->prev_sysclk = ret;
2004 	/* read preview HTS */
2005 	ret = ov5640_get_hts(sensor);
2006 	if (ret < 0)
2007 		return ret;
2008 	if (ret == 0)
2009 		return -EINVAL;
2010 	sensor->prev_hts = ret;
2011 
2012 	/* read preview VTS */
2013 	ret = ov5640_get_vts(sensor);
2014 	if (ret < 0)
2015 		return ret;
2016 	prev_vts = ret;
2017 
2018 	/* calculate banding filter */
2019 	/* 60Hz */
2020 	band_step60 = sensor->prev_sysclk * 100 / sensor->prev_hts * 100 / 120;
2021 	ret = ov5640_write_reg16(sensor, OV5640_REG_AEC_B60_STEP, band_step60);
2022 	if (ret)
2023 		return ret;
2024 	if (!band_step60)
2025 		return -EINVAL;
2026 	max_band60 = (int)((prev_vts - 4) / band_step60);
2027 	ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0D, max_band60);
2028 	if (ret)
2029 		return ret;
2030 
2031 	/* 50Hz */
2032 	band_step50 = sensor->prev_sysclk * 100 / sensor->prev_hts;
2033 	ret = ov5640_write_reg16(sensor, OV5640_REG_AEC_B50_STEP, band_step50);
2034 	if (ret)
2035 		return ret;
2036 	if (!band_step50)
2037 		return -EINVAL;
2038 	max_band50 = (int)((prev_vts - 4) / band_step50);
2039 	return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0E, max_band50);
2040 }
2041 
2042 static int ov5640_set_ae_target(struct ov5640_dev *sensor, int target)
2043 {
2044 	/* stable in high */
2045 	u32 fast_high, fast_low;
2046 	int ret;
2047 
2048 	sensor->ae_low = target * 23 / 25;	/* 0.92 */
2049 	sensor->ae_high = target * 27 / 25;	/* 1.08 */
2050 
2051 	fast_high = sensor->ae_high << 1;
2052 	if (fast_high > 255)
2053 		fast_high = 255;
2054 
2055 	fast_low = sensor->ae_low >> 1;
2056 
2057 	ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL0F, sensor->ae_high);
2058 	if (ret)
2059 		return ret;
2060 	ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL10, sensor->ae_low);
2061 	if (ret)
2062 		return ret;
2063 	ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1B, sensor->ae_high);
2064 	if (ret)
2065 		return ret;
2066 	ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1E, sensor->ae_low);
2067 	if (ret)
2068 		return ret;
2069 	ret = ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL11, fast_high);
2070 	if (ret)
2071 		return ret;
2072 	return ov5640_write_reg(sensor, OV5640_REG_AEC_CTRL1F, fast_low);
2073 }
2074 
2075 static int ov5640_get_binning(struct ov5640_dev *sensor)
2076 {
2077 	u8 temp;
2078 	int ret;
2079 
2080 	ret = ov5640_read_reg(sensor, OV5640_REG_TIMING_TC_REG21, &temp);
2081 	if (ret)
2082 		return ret;
2083 
2084 	return temp & BIT(0);
2085 }
2086 
2087 static int ov5640_set_binning(struct ov5640_dev *sensor, bool enable)
2088 {
2089 	int ret;
2090 
2091 	/*
2092 	 * TIMING TC REG21:
2093 	 * - [0]:	Horizontal binning enable
2094 	 */
2095 	ret = ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21,
2096 			     BIT(0), enable ? BIT(0) : 0);
2097 	if (ret)
2098 		return ret;
2099 	/*
2100 	 * TIMING TC REG20:
2101 	 * - [0]:	Undocumented, but hardcoded init sequences
2102 	 *		are always setting REG21/REG20 bit 0 to same value...
2103 	 */
2104 	return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG20,
2105 			      BIT(0), enable ? BIT(0) : 0);
2106 }
2107 
2108 static int ov5640_set_virtual_channel(struct ov5640_dev *sensor)
2109 {
2110 	struct i2c_client *client = sensor->i2c_client;
2111 	u8 temp, channel = virtual_channel;
2112 	int ret;
2113 
2114 	if (channel > 3) {
2115 		dev_err(&client->dev,
2116 			"%s: wrong virtual_channel parameter, expected (0..3), got %d\n",
2117 			__func__, channel);
2118 		return -EINVAL;
2119 	}
2120 
2121 	ret = ov5640_read_reg(sensor, OV5640_REG_DEBUG_MODE, &temp);
2122 	if (ret)
2123 		return ret;
2124 	temp &= ~(3 << 6);
2125 	temp |= (channel << 6);
2126 	return ov5640_write_reg(sensor, OV5640_REG_DEBUG_MODE, temp);
2127 }
2128 
2129 static const struct ov5640_mode_info *
2130 ov5640_find_mode(struct ov5640_dev *sensor, int width, int height, bool nearest)
2131 {
2132 	const struct ov5640_mode_info *mode;
2133 
2134 	mode = v4l2_find_nearest_size(ov5640_mode_data,
2135 				      ARRAY_SIZE(ov5640_mode_data),
2136 				      width, height, width, height);
2137 
2138 	if (!mode ||
2139 	    (!nearest &&
2140 	     (mode->width != width || mode->height != height)))
2141 		return NULL;
2142 
2143 	return mode;
2144 }
2145 
2146 /*
2147  * sensor changes between scaling and subsampling, go through
2148  * exposure calculation
2149  */
2150 static int ov5640_set_mode_exposure_calc(struct ov5640_dev *sensor,
2151 					 const struct ov5640_mode_info *mode)
2152 {
2153 	u32 prev_shutter, prev_gain16;
2154 	u32 cap_shutter, cap_gain16;
2155 	u32 cap_sysclk, cap_hts, cap_vts;
2156 	u32 light_freq, cap_bandfilt, cap_maxband;
2157 	u32 cap_gain16_shutter;
2158 	u8 average;
2159 	int ret;
2160 
2161 	if (!mode->reg_data)
2162 		return -EINVAL;
2163 
2164 	/* read preview shutter */
2165 	ret = ov5640_get_exposure(sensor);
2166 	if (ret < 0)
2167 		return ret;
2168 	prev_shutter = ret;
2169 	ret = ov5640_get_binning(sensor);
2170 	if (ret < 0)
2171 		return ret;
2172 	if (ret && mode->id != OV5640_MODE_720P_1280_720 &&
2173 	    mode->id != OV5640_MODE_1080P_1920_1080)
2174 		prev_shutter *= 2;
2175 
2176 	/* read preview gain */
2177 	ret = ov5640_get_gain(sensor);
2178 	if (ret < 0)
2179 		return ret;
2180 	prev_gain16 = ret;
2181 
2182 	/* get average */
2183 	ret = ov5640_read_reg(sensor, OV5640_REG_AVG_READOUT, &average);
2184 	if (ret)
2185 		return ret;
2186 
2187 	/* turn off night mode for capture */
2188 	ret = ov5640_set_night_mode(sensor);
2189 	if (ret < 0)
2190 		return ret;
2191 
2192 	/* Write capture setting */
2193 	ov5640_load_regs(sensor, mode->reg_data, mode->reg_data_size);
2194 	ret = ov5640_set_timings(sensor, mode);
2195 	if (ret < 0)
2196 		return ret;
2197 
2198 	/* read capture VTS */
2199 	ret = ov5640_get_vts(sensor);
2200 	if (ret < 0)
2201 		return ret;
2202 	cap_vts = ret;
2203 	ret = ov5640_get_hts(sensor);
2204 	if (ret < 0)
2205 		return ret;
2206 	if (ret == 0)
2207 		return -EINVAL;
2208 	cap_hts = ret;
2209 
2210 	ret = ov5640_get_sysclk(sensor);
2211 	if (ret < 0)
2212 		return ret;
2213 	if (ret == 0)
2214 		return -EINVAL;
2215 	cap_sysclk = ret;
2216 
2217 	/* calculate capture banding filter */
2218 	ret = ov5640_get_light_freq(sensor);
2219 	if (ret < 0)
2220 		return ret;
2221 	light_freq = ret;
2222 
2223 	if (light_freq == 60) {
2224 		/* 60Hz */
2225 		cap_bandfilt = cap_sysclk * 100 / cap_hts * 100 / 120;
2226 	} else {
2227 		/* 50Hz */
2228 		cap_bandfilt = cap_sysclk * 100 / cap_hts;
2229 	}
2230 
2231 	if (!sensor->prev_sysclk) {
2232 		ret = ov5640_get_sysclk(sensor);
2233 		if (ret < 0)
2234 			return ret;
2235 		if (ret == 0)
2236 			return -EINVAL;
2237 		sensor->prev_sysclk = ret;
2238 	}
2239 
2240 	if (!cap_bandfilt)
2241 		return -EINVAL;
2242 
2243 	cap_maxband = (int)((cap_vts - 4) / cap_bandfilt);
2244 
2245 	/* calculate capture shutter/gain16 */
2246 	if (average > sensor->ae_low && average < sensor->ae_high) {
2247 		/* in stable range */
2248 		cap_gain16_shutter =
2249 			prev_gain16 * prev_shutter *
2250 			cap_sysclk / sensor->prev_sysclk *
2251 			sensor->prev_hts / cap_hts *
2252 			sensor->ae_target / average;
2253 	} else {
2254 		cap_gain16_shutter =
2255 			prev_gain16 * prev_shutter *
2256 			cap_sysclk / sensor->prev_sysclk *
2257 			sensor->prev_hts / cap_hts;
2258 	}
2259 
2260 	/* gain to shutter */
2261 	if (cap_gain16_shutter < (cap_bandfilt * 16)) {
2262 		/* shutter < 1/100 */
2263 		cap_shutter = cap_gain16_shutter / 16;
2264 		if (cap_shutter < 1)
2265 			cap_shutter = 1;
2266 
2267 		cap_gain16 = cap_gain16_shutter / cap_shutter;
2268 		if (cap_gain16 < 16)
2269 			cap_gain16 = 16;
2270 	} else {
2271 		if (cap_gain16_shutter > (cap_bandfilt * cap_maxband * 16)) {
2272 			/* exposure reach max */
2273 			cap_shutter = cap_bandfilt * cap_maxband;
2274 			if (!cap_shutter)
2275 				return -EINVAL;
2276 
2277 			cap_gain16 = cap_gain16_shutter / cap_shutter;
2278 		} else {
2279 			/* 1/100 < (cap_shutter = n/100) =< max */
2280 			cap_shutter =
2281 				((int)(cap_gain16_shutter / 16 / cap_bandfilt))
2282 				* cap_bandfilt;
2283 			if (!cap_shutter)
2284 				return -EINVAL;
2285 
2286 			cap_gain16 = cap_gain16_shutter / cap_shutter;
2287 		}
2288 	}
2289 
2290 	/* set capture gain */
2291 	ret = ov5640_set_gain(sensor, cap_gain16);
2292 	if (ret)
2293 		return ret;
2294 
2295 	/* write capture shutter */
2296 	if (cap_shutter > (cap_vts - 4)) {
2297 		cap_vts = cap_shutter + 4;
2298 		ret = ov5640_set_vts(sensor, cap_vts);
2299 		if (ret < 0)
2300 			return ret;
2301 	}
2302 
2303 	/* set exposure */
2304 	return ov5640_set_exposure(sensor, cap_shutter);
2305 }
2306 
2307 /*
2308  * if sensor changes inside scaling or subsampling
2309  * change mode directly
2310  */
2311 static int ov5640_set_mode_direct(struct ov5640_dev *sensor,
2312 				  const struct ov5640_mode_info *mode)
2313 {
2314 	if (!mode->reg_data)
2315 		return -EINVAL;
2316 
2317 	/* Write capture setting */
2318 	ov5640_load_regs(sensor, mode->reg_data, mode->reg_data_size);
2319 	return ov5640_set_timings(sensor, mode);
2320 }
2321 
2322 static int ov5640_set_mode(struct ov5640_dev *sensor)
2323 {
2324 	const struct ov5640_mode_info *mode = sensor->current_mode;
2325 	const struct ov5640_mode_info *orig_mode = sensor->last_mode;
2326 	enum ov5640_downsize_mode dn_mode, orig_dn_mode;
2327 	bool auto_gain = sensor->ctrls.auto_gain->val == 1;
2328 	bool auto_exp =  sensor->ctrls.auto_exp->val == V4L2_EXPOSURE_AUTO;
2329 	int ret;
2330 
2331 	dn_mode = mode->dn_mode;
2332 	orig_dn_mode = orig_mode->dn_mode;
2333 
2334 	/* auto gain and exposure must be turned off when changing modes */
2335 	if (auto_gain) {
2336 		ret = ov5640_set_autogain(sensor, false);
2337 		if (ret)
2338 			return ret;
2339 	}
2340 
2341 	if (auto_exp) {
2342 		ret = ov5640_set_autoexposure(sensor, false);
2343 		if (ret)
2344 			goto restore_auto_gain;
2345 	}
2346 
2347 	if (ov5640_is_csi2(sensor))
2348 		ret = ov5640_set_mipi_pclk(sensor);
2349 	else
2350 		ret = ov5640_set_dvp_pclk(sensor);
2351 	if (ret < 0)
2352 		return 0;
2353 
2354 	if ((dn_mode == SUBSAMPLING && orig_dn_mode == SCALING) ||
2355 	    (dn_mode == SCALING && orig_dn_mode == SUBSAMPLING)) {
2356 		/*
2357 		 * change between subsampling and scaling
2358 		 * go through exposure calculation
2359 		 */
2360 		ret = ov5640_set_mode_exposure_calc(sensor, mode);
2361 	} else {
2362 		/*
2363 		 * change inside subsampling or scaling
2364 		 * download firmware directly
2365 		 */
2366 		ret = ov5640_set_mode_direct(sensor, mode);
2367 	}
2368 	if (ret < 0)
2369 		goto restore_auto_exp_gain;
2370 
2371 	/* restore auto gain and exposure */
2372 	if (auto_gain)
2373 		ov5640_set_autogain(sensor, true);
2374 	if (auto_exp)
2375 		ov5640_set_autoexposure(sensor, true);
2376 
2377 	ret = ov5640_set_binning(sensor, dn_mode != SCALING);
2378 	if (ret < 0)
2379 		return ret;
2380 	ret = ov5640_set_ae_target(sensor, sensor->ae_target);
2381 	if (ret < 0)
2382 		return ret;
2383 	ret = ov5640_get_light_freq(sensor);
2384 	if (ret < 0)
2385 		return ret;
2386 	ret = ov5640_set_bandingfilter(sensor);
2387 	if (ret < 0)
2388 		return ret;
2389 	ret = ov5640_set_virtual_channel(sensor);
2390 	if (ret < 0)
2391 		return ret;
2392 
2393 	sensor->pending_mode_change = false;
2394 	sensor->last_mode = mode;
2395 
2396 	return 0;
2397 
2398 restore_auto_exp_gain:
2399 	if (auto_exp)
2400 		ov5640_set_autoexposure(sensor, true);
2401 restore_auto_gain:
2402 	if (auto_gain)
2403 		ov5640_set_autogain(sensor, true);
2404 
2405 	return ret;
2406 }
2407 
2408 static int ov5640_set_framefmt(struct ov5640_dev *sensor,
2409 			       struct v4l2_mbus_framefmt *format);
2410 
2411 /* restore the last set video mode after chip power-on */
2412 static int ov5640_restore_mode(struct ov5640_dev *sensor)
2413 {
2414 	int ret;
2415 
2416 	/* first load the initial register values */
2417 	ov5640_load_regs(sensor, ov5640_init_setting,
2418 			 ARRAY_SIZE(ov5640_init_setting));
2419 
2420 	ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_ROOT_DIVIDER, 0x3f,
2421 			     (ilog2(OV5640_SCLK2X_ROOT_DIV) << 2) |
2422 			     ilog2(OV5640_SCLK_ROOT_DIV));
2423 	if (ret)
2424 		return ret;
2425 
2426 	/* now restore the last capture mode */
2427 	ret = ov5640_set_mode(sensor);
2428 	if (ret < 0)
2429 		return ret;
2430 
2431 	return ov5640_set_framefmt(sensor, &sensor->fmt);
2432 }
2433 
2434 static void ov5640_power(struct ov5640_dev *sensor, bool enable)
2435 {
2436 	gpiod_set_value_cansleep(sensor->pwdn_gpio, enable ? 0 : 1);
2437 }
2438 
2439 /*
2440  * From section 2.7 power up sequence:
2441  * t0 + t1 + t2 >= 5ms	Delay from DOVDD stable to PWDN pull down
2442  * t3 >= 1ms		Delay from PWDN pull down to RESETB pull up
2443  * t4 >= 20ms		Delay from RESETB pull up to SCCB (i2c) stable
2444  *
2445  * Some modules don't expose RESETB/PWDN pins directly, instead providing a
2446  * "PWUP" GPIO which is wired through appropriate delays and inverters to the
2447  * pins.
2448  *
2449  * In such cases, this gpio should be mapped to pwdn_gpio in the driver, and we
2450  * should still toggle the pwdn_gpio below with the appropriate delays, while
2451  * the calls to reset_gpio will be ignored.
2452  */
2453 static void ov5640_powerup_sequence(struct ov5640_dev *sensor)
2454 {
2455 	if (sensor->pwdn_gpio) {
2456 		gpiod_set_value_cansleep(sensor->reset_gpio, 0);
2457 
2458 		/* camera power cycle */
2459 		ov5640_power(sensor, false);
2460 		usleep_range(5000, 10000);
2461 		ov5640_power(sensor, true);
2462 		usleep_range(5000, 10000);
2463 
2464 		gpiod_set_value_cansleep(sensor->reset_gpio, 1);
2465 		usleep_range(1000, 2000);
2466 
2467 		gpiod_set_value_cansleep(sensor->reset_gpio, 0);
2468 	} else {
2469 		/* software reset */
2470 		ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0,
2471 				 OV5640_REG_SYS_CTRL0_SW_RST);
2472 	}
2473 	usleep_range(20000, 25000);
2474 
2475 	/*
2476 	 * software standby: allows registers programming;
2477 	 * exit at restore_mode() for CSI, s_stream(1) for DVP
2478 	 */
2479 	ov5640_write_reg(sensor, OV5640_REG_SYS_CTRL0,
2480 			 OV5640_REG_SYS_CTRL0_SW_PWDN);
2481 }
2482 
2483 static int ov5640_set_power_on(struct ov5640_dev *sensor)
2484 {
2485 	struct i2c_client *client = sensor->i2c_client;
2486 	int ret;
2487 
2488 	ret = clk_prepare_enable(sensor->xclk);
2489 	if (ret) {
2490 		dev_err(&client->dev, "%s: failed to enable clock\n",
2491 			__func__);
2492 		return ret;
2493 	}
2494 
2495 	ret = regulator_bulk_enable(OV5640_NUM_SUPPLIES,
2496 				    sensor->supplies);
2497 	if (ret) {
2498 		dev_err(&client->dev, "%s: failed to enable regulators\n",
2499 			__func__);
2500 		goto xclk_off;
2501 	}
2502 
2503 	ov5640_powerup_sequence(sensor);
2504 
2505 	ret = ov5640_init_slave_id(sensor);
2506 	if (ret)
2507 		goto power_off;
2508 
2509 	return 0;
2510 
2511 power_off:
2512 	ov5640_power(sensor, false);
2513 	regulator_bulk_disable(OV5640_NUM_SUPPLIES, sensor->supplies);
2514 xclk_off:
2515 	clk_disable_unprepare(sensor->xclk);
2516 	return ret;
2517 }
2518 
2519 static void ov5640_set_power_off(struct ov5640_dev *sensor)
2520 {
2521 	ov5640_power(sensor, false);
2522 	regulator_bulk_disable(OV5640_NUM_SUPPLIES, sensor->supplies);
2523 	clk_disable_unprepare(sensor->xclk);
2524 }
2525 
2526 static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on)
2527 {
2528 	int ret;
2529 
2530 	if (!on) {
2531 		/* Reset MIPI bus settings to their default values. */
2532 		ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58);
2533 		ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x04);
2534 		ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x00);
2535 		return 0;
2536 	}
2537 
2538 	/*
2539 	 * Power up MIPI HS Tx and LS Rx; 2 data lanes mode
2540 	 *
2541 	 * 0x300e = 0x40
2542 	 * [7:5] = 010	: 2 data lanes mode (see FIXME note in
2543 	 *		  "ov5640_set_stream_mipi()")
2544 	 * [4] = 0	: Power up MIPI HS Tx
2545 	 * [3] = 0	: Power up MIPI LS Rx
2546 	 * [2] = 0	: MIPI interface disabled
2547 	 */
2548 	ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40);
2549 	if (ret)
2550 		return ret;
2551 
2552 	/*
2553 	 * Gate clock and set LP11 in 'no packets mode' (idle)
2554 	 *
2555 	 * 0x4800 = 0x24
2556 	 * [5] = 1	: Gate clock when 'no packets'
2557 	 * [2] = 1	: MIPI bus in LP11 when 'no packets'
2558 	 */
2559 	ret = ov5640_write_reg(sensor, OV5640_REG_MIPI_CTRL00, 0x24);
2560 	if (ret)
2561 		return ret;
2562 
2563 	/*
2564 	 * Set data lanes and clock in LP11 when 'sleeping'
2565 	 *
2566 	 * 0x3019 = 0x70
2567 	 * [6] = 1	: MIPI data lane 2 in LP11 when 'sleeping'
2568 	 * [5] = 1	: MIPI data lane 1 in LP11 when 'sleeping'
2569 	 * [4] = 1	: MIPI clock lane in LP11 when 'sleeping'
2570 	 */
2571 	ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, 0x70);
2572 	if (ret)
2573 		return ret;
2574 
2575 	/* Give lanes some time to coax into LP11 state. */
2576 	usleep_range(500, 1000);
2577 
2578 	return 0;
2579 }
2580 
2581 static int ov5640_set_power_dvp(struct ov5640_dev *sensor, bool on)
2582 {
2583 	unsigned int flags = sensor->ep.bus.parallel.flags;
2584 	bool bt656 = sensor->ep.bus_type == V4L2_MBUS_BT656;
2585 	u8 polarities = 0;
2586 	int ret;
2587 
2588 	if (!on) {
2589 		/* Reset settings to their default values. */
2590 		ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00, 0x00);
2591 		ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x58);
2592 		ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, 0x20);
2593 		ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01, 0x00);
2594 		ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0x00);
2595 		return 0;
2596 	}
2597 
2598 	/*
2599 	 * Note about parallel port configuration.
2600 	 *
2601 	 * When configured in parallel mode, the OV5640 will
2602 	 * output 10 bits data on DVP data lines [9:0].
2603 	 * If only 8 bits data are wanted, the 8 bits data lines
2604 	 * of the camera interface must be physically connected
2605 	 * on the DVP data lines [9:2].
2606 	 *
2607 	 * Control lines polarity can be configured through
2608 	 * devicetree endpoint control lines properties.
2609 	 * If no endpoint control lines properties are set,
2610 	 * polarity will be as below:
2611 	 * - VSYNC:	active high
2612 	 * - HREF:	active low
2613 	 * - PCLK:	active low
2614 	 *
2615 	 * VSYNC & HREF are not configured if BT656 bus mode is selected
2616 	 */
2617 
2618 	/*
2619 	 * BT656 embedded synchronization configuration
2620 	 *
2621 	 * CCIR656 CTRL00
2622 	 * - [7]:	SYNC code selection (0: auto generate sync code,
2623 	 *		1: sync code from regs 0x4732-0x4735)
2624 	 * - [6]:	f value in CCIR656 SYNC code when fixed f value
2625 	 * - [5]:	Fixed f value
2626 	 * - [4:3]:	Blank toggle data options (00: data=1'h040/1'h200,
2627 	 *		01: data from regs 0x4736-0x4738, 10: always keep 0)
2628 	 * - [1]:	Clip data disable
2629 	 * - [0]:	CCIR656 mode enable
2630 	 *
2631 	 * Default CCIR656 SAV/EAV mode with default codes
2632 	 * SAV=0xff000080 & EAV=0xff00009d is enabled here with settings:
2633 	 * - CCIR656 mode enable
2634 	 * - auto generation of sync codes
2635 	 * - blank toggle data 1'h040/1'h200
2636 	 * - clip reserved data (0x00 & 0xff changed to 0x01 & 0xfe)
2637 	 */
2638 	ret = ov5640_write_reg(sensor, OV5640_REG_CCIR656_CTRL00,
2639 			       bt656 ? 0x01 : 0x00);
2640 	if (ret)
2641 		return ret;
2642 
2643 	/*
2644 	 * configure parallel port control lines polarity
2645 	 *
2646 	 * POLARITY CTRL0
2647 	 * - [5]:	PCLK polarity (0: active low, 1: active high)
2648 	 * - [1]:	HREF polarity (0: active low, 1: active high)
2649 	 * - [0]:	VSYNC polarity (mismatch here between
2650 	 *		datasheet and hardware, 0 is active high
2651 	 *		and 1 is active low...)
2652 	 */
2653 	if (!bt656) {
2654 		if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
2655 			polarities |= BIT(1);
2656 		if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
2657 			polarities |= BIT(0);
2658 	}
2659 	if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
2660 		polarities |= BIT(5);
2661 
2662 	ret = ov5640_write_reg(sensor, OV5640_REG_POLARITY_CTRL00, polarities);
2663 	if (ret)
2664 		return ret;
2665 
2666 	/*
2667 	 * powerdown MIPI TX/RX PHY & enable DVP
2668 	 *
2669 	 * MIPI CONTROL 00
2670 	 * [4] = 1	: Power down MIPI HS Tx
2671 	 * [3] = 1	: Power down MIPI LS Rx
2672 	 * [2] = 0	: DVP enable (MIPI disable)
2673 	 */
2674 	ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x18);
2675 	if (ret)
2676 		return ret;
2677 
2678 	/*
2679 	 * enable VSYNC/HREF/PCLK DVP control lines
2680 	 * & D[9:6] DVP data lines
2681 	 *
2682 	 * PAD OUTPUT ENABLE 01
2683 	 * - 6:		VSYNC output enable
2684 	 * - 5:		HREF output enable
2685 	 * - 4:		PCLK output enable
2686 	 * - [3:0]:	D[9:6] output enable
2687 	 */
2688 	ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE01,
2689 			       bt656 ? 0x1f : 0x7f);
2690 	if (ret)
2691 		return ret;
2692 
2693 	/*
2694 	 * enable D[5:0] DVP data lines
2695 	 *
2696 	 * PAD OUTPUT ENABLE 02
2697 	 * - [7:2]:	D[5:0] output enable
2698 	 */
2699 	return ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT_ENABLE02, 0xfc);
2700 }
2701 
2702 static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
2703 {
2704 	int ret = 0;
2705 
2706 	if (on) {
2707 		ret = ov5640_set_power_on(sensor);
2708 		if (ret)
2709 			return ret;
2710 
2711 		ret = ov5640_restore_mode(sensor);
2712 		if (ret)
2713 			goto power_off;
2714 	}
2715 
2716 	if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
2717 		ret = ov5640_set_power_mipi(sensor, on);
2718 	else
2719 		ret = ov5640_set_power_dvp(sensor, on);
2720 	if (ret)
2721 		goto power_off;
2722 
2723 	if (!on)
2724 		ov5640_set_power_off(sensor);
2725 
2726 	return 0;
2727 
2728 power_off:
2729 	ov5640_set_power_off(sensor);
2730 	return ret;
2731 }
2732 
2733 static int ov5640_sensor_suspend(struct device *dev)
2734 {
2735 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
2736 	struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
2737 
2738 	return ov5640_set_power(ov5640, false);
2739 }
2740 
2741 static int ov5640_sensor_resume(struct device *dev)
2742 {
2743 	struct v4l2_subdev *sd = dev_get_drvdata(dev);
2744 	struct ov5640_dev *ov5640 = to_ov5640_dev(sd);
2745 
2746 	return ov5640_set_power(ov5640, true);
2747 }
2748 
2749 /* --------------- Subdev Operations --------------- */
2750 
2751 static int ov5640_try_frame_interval(struct ov5640_dev *sensor,
2752 				     struct v4l2_fract *fi,
2753 				     const struct ov5640_mode_info *mode_info)
2754 {
2755 	const struct ov5640_mode_info *mode = mode_info;
2756 	enum ov5640_frame_rate rate = OV5640_15_FPS;
2757 	int minfps, maxfps, best_fps, fps;
2758 	int i;
2759 
2760 	minfps = ov5640_framerates[OV5640_15_FPS];
2761 	maxfps = ov5640_framerates[mode->max_fps];
2762 
2763 	if (fi->numerator == 0) {
2764 		fi->denominator = maxfps;
2765 		fi->numerator = 1;
2766 		rate = mode->max_fps;
2767 		goto find_mode;
2768 	}
2769 
2770 	fps = clamp_val(DIV_ROUND_CLOSEST(fi->denominator, fi->numerator),
2771 			minfps, maxfps);
2772 
2773 	best_fps = minfps;
2774 	for (i = 0; i < ARRAY_SIZE(ov5640_framerates); i++) {
2775 		int curr_fps = ov5640_framerates[i];
2776 
2777 		if (abs(curr_fps - fps) < abs(best_fps - fps)) {
2778 			best_fps = curr_fps;
2779 			rate = i;
2780 		}
2781 	}
2782 
2783 	fi->numerator = 1;
2784 	fi->denominator = best_fps;
2785 
2786 find_mode:
2787 	mode = ov5640_find_mode(sensor, mode->width, mode->height, false);
2788 	return mode ? rate : -EINVAL;
2789 }
2790 
2791 static int ov5640_get_fmt(struct v4l2_subdev *sd,
2792 			  struct v4l2_subdev_state *sd_state,
2793 			  struct v4l2_subdev_format *format)
2794 {
2795 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
2796 	struct v4l2_mbus_framefmt *fmt;
2797 
2798 	if (format->pad != 0)
2799 		return -EINVAL;
2800 
2801 	mutex_lock(&sensor->lock);
2802 
2803 	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
2804 		fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state,
2805 						 format->pad);
2806 	else
2807 		fmt = &sensor->fmt;
2808 
2809 	format->format = *fmt;
2810 
2811 	mutex_unlock(&sensor->lock);
2812 
2813 	return 0;
2814 }
2815 
2816 static int ov5640_try_fmt_internal(struct v4l2_subdev *sd,
2817 				   struct v4l2_mbus_framefmt *fmt,
2818 				   const struct ov5640_mode_info **new_mode)
2819 {
2820 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
2821 	const struct ov5640_mode_info *mode;
2822 	const struct ov5640_pixfmt *pixfmt;
2823 	unsigned int bpp;
2824 
2825 	mode = ov5640_find_mode(sensor, fmt->width, fmt->height, true);
2826 	if (!mode)
2827 		return -EINVAL;
2828 
2829 	pixfmt = ov5640_code_to_pixfmt(sensor, fmt->code);
2830 	bpp = pixfmt->bpp;
2831 
2832 	/*
2833 	 * Adjust mode according to bpp:
2834 	 * - 8bpp modes work for resolution >= 1280x720
2835 	 * - 24bpp modes work resolution < 1280x720
2836 	 */
2837 	if (bpp == 8 && mode->width < 1280)
2838 		mode = &ov5640_mode_data[OV5640_MODE_720P_1280_720];
2839 	else if (bpp == 24 && mode->width > 1024)
2840 		mode = &ov5640_mode_data[OV5640_MODE_XGA_1024_768];
2841 
2842 	fmt->width = mode->width;
2843 	fmt->height = mode->height;
2844 
2845 	if (new_mode)
2846 		*new_mode = mode;
2847 
2848 	fmt->code = pixfmt->code;
2849 	fmt->colorspace = pixfmt->colorspace;
2850 	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
2851 	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
2852 	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
2853 
2854 	return 0;
2855 }
2856 
2857 static int ov5640_update_pixel_rate(struct ov5640_dev *sensor)
2858 {
2859 	const struct ov5640_mode_info *mode = sensor->current_mode;
2860 	enum ov5640_pixel_rate_id pixel_rate_id = mode->pixel_rate;
2861 	struct v4l2_mbus_framefmt *fmt = &sensor->fmt;
2862 	const struct ov5640_timings *timings;
2863 	s32 exposure_val, exposure_max;
2864 	unsigned int hblank;
2865 	unsigned int i = 0;
2866 	u32 pixel_rate;
2867 	s64 link_freq;
2868 	u32 num_lanes;
2869 	u32 vblank;
2870 	u32 bpp;
2871 
2872 	/*
2873 	 * Update the pixel rate control value.
2874 	 *
2875 	 * For DVP mode, maintain the pixel rate calculation using fixed FPS.
2876 	 */
2877 	if (!ov5640_is_csi2(sensor)) {
2878 		__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
2879 					 ov5640_calc_pixel_rate(sensor));
2880 
2881 		return 0;
2882 	}
2883 
2884 	/*
2885 	 * The MIPI CSI-2 link frequency should comply with the CSI-2
2886 	 * specification and be lower than 1GHz.
2887 	 *
2888 	 * Start from the suggested pixel_rate for the current mode and
2889 	 * progressively slow it down if it exceeds 1GHz.
2890 	 */
2891 	num_lanes = sensor->ep.bus.mipi_csi2.num_data_lanes;
2892 	bpp = ov5640_code_to_bpp(sensor, fmt->code);
2893 	do {
2894 		pixel_rate = ov5640_pixel_rates[pixel_rate_id];
2895 		link_freq = pixel_rate * bpp / (2 * num_lanes);
2896 	} while (link_freq >= 1000000000U &&
2897 		 ++pixel_rate_id < OV5640_NUM_PIXEL_RATES);
2898 
2899 	sensor->current_link_freq = link_freq;
2900 
2901 	/*
2902 	 * Higher link rates require the clock tree to be programmed with
2903 	 * 'mipi_div' = 1; this has the effect of halving the actual output
2904 	 * pixel rate in the MIPI domain.
2905 	 *
2906 	 * Adjust the pixel rate and link frequency control value to report it
2907 	 * correctly to userspace.
2908 	 */
2909 	if (link_freq > OV5640_LINK_RATE_MAX) {
2910 		pixel_rate /= 2;
2911 		link_freq /= 2;
2912 	}
2913 
2914 	for (i = 0; i < ARRAY_SIZE(ov5640_csi2_link_freqs); ++i) {
2915 		if (ov5640_csi2_link_freqs[i] == link_freq)
2916 			break;
2917 	}
2918 	WARN_ON(i == ARRAY_SIZE(ov5640_csi2_link_freqs));
2919 
2920 	__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate, pixel_rate);
2921 	__v4l2_ctrl_s_ctrl(sensor->ctrls.link_freq, i);
2922 
2923 	timings = ov5640_timings(sensor, mode);
2924 	hblank = timings->htot - mode->width;
2925 	__v4l2_ctrl_modify_range(sensor->ctrls.hblank,
2926 				 hblank, hblank, 1, hblank);
2927 
2928 	vblank = timings->vblank_def;
2929 	__v4l2_ctrl_modify_range(sensor->ctrls.vblank, OV5640_MIN_VBLANK,
2930 				 OV5640_MAX_VTS - mode->height, 1, vblank);
2931 	__v4l2_ctrl_s_ctrl(sensor->ctrls.vblank, vblank);
2932 
2933 	exposure_max = timings->crop.height + vblank - 4;
2934 	exposure_val = clamp_t(s32, sensor->ctrls.exposure->val,
2935 			       sensor->ctrls.exposure->minimum,
2936 			       exposure_max);
2937 
2938 	__v4l2_ctrl_modify_range(sensor->ctrls.exposure,
2939 				 sensor->ctrls.exposure->minimum,
2940 				 exposure_max, 1, exposure_val);
2941 
2942 	return 0;
2943 }
2944 
2945 static int ov5640_set_fmt(struct v4l2_subdev *sd,
2946 			  struct v4l2_subdev_state *sd_state,
2947 			  struct v4l2_subdev_format *format)
2948 {
2949 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
2950 	const struct ov5640_mode_info *new_mode;
2951 	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
2952 	int ret;
2953 
2954 	if (format->pad != 0)
2955 		return -EINVAL;
2956 
2957 	mutex_lock(&sensor->lock);
2958 
2959 	if (sensor->streaming) {
2960 		ret = -EBUSY;
2961 		goto out;
2962 	}
2963 
2964 	ret = ov5640_try_fmt_internal(sd, mbus_fmt, &new_mode);
2965 	if (ret)
2966 		goto out;
2967 
2968 	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
2969 		*v4l2_subdev_get_try_format(sd, sd_state, 0) = *mbus_fmt;
2970 		goto out;
2971 	}
2972 
2973 	if (new_mode != sensor->current_mode) {
2974 		sensor->current_fr = new_mode->def_fps;
2975 		sensor->current_mode = new_mode;
2976 		sensor->pending_mode_change = true;
2977 	}
2978 	if (mbus_fmt->code != sensor->fmt.code)
2979 		sensor->pending_fmt_change = true;
2980 
2981 	/* update format even if code is unchanged, resolution might change */
2982 	sensor->fmt = *mbus_fmt;
2983 
2984 	ov5640_update_pixel_rate(sensor);
2985 
2986 out:
2987 	mutex_unlock(&sensor->lock);
2988 	return ret;
2989 }
2990 
2991 static int ov5640_get_selection(struct v4l2_subdev *sd,
2992 				struct v4l2_subdev_state *sd_state,
2993 				struct v4l2_subdev_selection *sel)
2994 {
2995 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
2996 	const struct ov5640_mode_info *mode = sensor->current_mode;
2997 	const struct ov5640_timings *timings;
2998 
2999 	switch (sel->target) {
3000 	case V4L2_SEL_TGT_CROP: {
3001 		mutex_lock(&sensor->lock);
3002 		timings = ov5640_timings(sensor, mode);
3003 		sel->r = timings->analog_crop;
3004 		mutex_unlock(&sensor->lock);
3005 
3006 		return 0;
3007 	}
3008 
3009 	case V4L2_SEL_TGT_NATIVE_SIZE:
3010 	case V4L2_SEL_TGT_CROP_BOUNDS:
3011 		sel->r.top = 0;
3012 		sel->r.left = 0;
3013 		sel->r.width = OV5640_NATIVE_WIDTH;
3014 		sel->r.height = OV5640_NATIVE_HEIGHT;
3015 
3016 		return 0;
3017 
3018 	case V4L2_SEL_TGT_CROP_DEFAULT:
3019 		sel->r.top = OV5640_PIXEL_ARRAY_TOP;
3020 		sel->r.left = OV5640_PIXEL_ARRAY_LEFT;
3021 		sel->r.width = OV5640_PIXEL_ARRAY_WIDTH;
3022 		sel->r.height = OV5640_PIXEL_ARRAY_HEIGHT;
3023 
3024 		return 0;
3025 	}
3026 
3027 	return -EINVAL;
3028 }
3029 
3030 static int ov5640_set_framefmt(struct ov5640_dev *sensor,
3031 			       struct v4l2_mbus_framefmt *format)
3032 {
3033 	bool is_jpeg = format->code == MEDIA_BUS_FMT_JPEG_1X8;
3034 	const struct ov5640_pixfmt *pixfmt;
3035 	int ret = 0;
3036 
3037 	pixfmt = ov5640_code_to_pixfmt(sensor, format->code);
3038 
3039 	/* FORMAT CONTROL00: YUV and RGB formatting */
3040 	ret = ov5640_write_reg(sensor, OV5640_REG_FORMAT_CONTROL00,
3041 			       pixfmt->ctrl00);
3042 	if (ret)
3043 		return ret;
3044 
3045 	/* FORMAT MUX CONTROL: ISP YUV or RGB */
3046 	ret = ov5640_write_reg(sensor, OV5640_REG_ISP_FORMAT_MUX_CTRL,
3047 			       pixfmt->mux);
3048 	if (ret)
3049 		return ret;
3050 
3051 	/*
3052 	 * TIMING TC REG21:
3053 	 * - [5]:	JPEG enable
3054 	 */
3055 	ret = ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21,
3056 			     BIT(5), is_jpeg ? BIT(5) : 0);
3057 	if (ret)
3058 		return ret;
3059 
3060 	/*
3061 	 * SYSTEM RESET02:
3062 	 * - [4]:	Reset JFIFO
3063 	 * - [3]:	Reset SFIFO
3064 	 * - [2]:	Reset JPEG
3065 	 */
3066 	ret = ov5640_mod_reg(sensor, OV5640_REG_SYS_RESET02,
3067 			     BIT(4) | BIT(3) | BIT(2),
3068 			     is_jpeg ? 0 : (BIT(4) | BIT(3) | BIT(2)));
3069 	if (ret)
3070 		return ret;
3071 
3072 	/*
3073 	 * CLOCK ENABLE02:
3074 	 * - [5]:	Enable JPEG 2x clock
3075 	 * - [3]:	Enable JPEG clock
3076 	 */
3077 	return ov5640_mod_reg(sensor, OV5640_REG_SYS_CLOCK_ENABLE02,
3078 			      BIT(5) | BIT(3),
3079 			      is_jpeg ? (BIT(5) | BIT(3)) : 0);
3080 }
3081 
3082 /*
3083  * Sensor Controls.
3084  */
3085 
3086 static int ov5640_set_ctrl_hue(struct ov5640_dev *sensor, int value)
3087 {
3088 	int ret;
3089 
3090 	if (value) {
3091 		ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0,
3092 				     BIT(0), BIT(0));
3093 		if (ret)
3094 			return ret;
3095 		ret = ov5640_write_reg16(sensor, OV5640_REG_SDE_CTRL1, value);
3096 	} else {
3097 		ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(0), 0);
3098 	}
3099 
3100 	return ret;
3101 }
3102 
3103 static int ov5640_set_ctrl_contrast(struct ov5640_dev *sensor, int value)
3104 {
3105 	int ret;
3106 
3107 	if (value) {
3108 		ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0,
3109 				     BIT(2), BIT(2));
3110 		if (ret)
3111 			return ret;
3112 		ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL5,
3113 				       value & 0xff);
3114 	} else {
3115 		ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(2), 0);
3116 	}
3117 
3118 	return ret;
3119 }
3120 
3121 static int ov5640_set_ctrl_saturation(struct ov5640_dev *sensor, int value)
3122 {
3123 	int ret;
3124 
3125 	if (value) {
3126 		ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0,
3127 				     BIT(1), BIT(1));
3128 		if (ret)
3129 			return ret;
3130 		ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL3,
3131 				       value & 0xff);
3132 		if (ret)
3133 			return ret;
3134 		ret = ov5640_write_reg(sensor, OV5640_REG_SDE_CTRL4,
3135 				       value & 0xff);
3136 	} else {
3137 		ret = ov5640_mod_reg(sensor, OV5640_REG_SDE_CTRL0, BIT(1), 0);
3138 	}
3139 
3140 	return ret;
3141 }
3142 
3143 static int ov5640_set_ctrl_white_balance(struct ov5640_dev *sensor, int awb)
3144 {
3145 	int ret;
3146 
3147 	ret = ov5640_mod_reg(sensor, OV5640_REG_AWB_MANUAL_CTRL,
3148 			     BIT(0), awb ? 0 : 1);
3149 	if (ret)
3150 		return ret;
3151 
3152 	if (!awb) {
3153 		u16 red = (u16)sensor->ctrls.red_balance->val;
3154 		u16 blue = (u16)sensor->ctrls.blue_balance->val;
3155 
3156 		ret = ov5640_write_reg16(sensor, OV5640_REG_AWB_R_GAIN, red);
3157 		if (ret)
3158 			return ret;
3159 		ret = ov5640_write_reg16(sensor, OV5640_REG_AWB_B_GAIN, blue);
3160 	}
3161 
3162 	return ret;
3163 }
3164 
3165 static int ov5640_set_ctrl_exposure(struct ov5640_dev *sensor,
3166 				    enum v4l2_exposure_auto_type auto_exposure)
3167 {
3168 	struct ov5640_ctrls *ctrls = &sensor->ctrls;
3169 	bool auto_exp = (auto_exposure == V4L2_EXPOSURE_AUTO);
3170 	int ret = 0;
3171 
3172 	if (ctrls->auto_exp->is_new) {
3173 		ret = ov5640_set_autoexposure(sensor, auto_exp);
3174 		if (ret)
3175 			return ret;
3176 	}
3177 
3178 	if (!auto_exp && ctrls->exposure->is_new) {
3179 		u16 max_exp;
3180 
3181 		ret = ov5640_read_reg16(sensor, OV5640_REG_AEC_PK_VTS,
3182 					&max_exp);
3183 		if (ret)
3184 			return ret;
3185 		ret = ov5640_get_vts(sensor);
3186 		if (ret < 0)
3187 			return ret;
3188 		max_exp += ret;
3189 		ret = 0;
3190 
3191 		if (ctrls->exposure->val < max_exp)
3192 			ret = ov5640_set_exposure(sensor, ctrls->exposure->val);
3193 	}
3194 
3195 	return ret;
3196 }
3197 
3198 static int ov5640_set_ctrl_gain(struct ov5640_dev *sensor, bool auto_gain)
3199 {
3200 	struct ov5640_ctrls *ctrls = &sensor->ctrls;
3201 	int ret = 0;
3202 
3203 	if (ctrls->auto_gain->is_new) {
3204 		ret = ov5640_set_autogain(sensor, auto_gain);
3205 		if (ret)
3206 			return ret;
3207 	}
3208 
3209 	if (!auto_gain && ctrls->gain->is_new)
3210 		ret = ov5640_set_gain(sensor, ctrls->gain->val);
3211 
3212 	return ret;
3213 }
3214 
3215 static const char * const test_pattern_menu[] = {
3216 	"Disabled",
3217 	"Color bars",
3218 	"Color bars w/ rolling bar",
3219 	"Color squares",
3220 	"Color squares w/ rolling bar",
3221 };
3222 
3223 #define OV5640_TEST_ENABLE		BIT(7)
3224 #define OV5640_TEST_ROLLING		BIT(6)	/* rolling horizontal bar */
3225 #define OV5640_TEST_TRANSPARENT		BIT(5)
3226 #define OV5640_TEST_SQUARE_BW		BIT(4)	/* black & white squares */
3227 #define OV5640_TEST_BAR_STANDARD	(0 << 2)
3228 #define OV5640_TEST_BAR_VERT_CHANGE_1	(1 << 2)
3229 #define OV5640_TEST_BAR_HOR_CHANGE	(2 << 2)
3230 #define OV5640_TEST_BAR_VERT_CHANGE_2	(3 << 2)
3231 #define OV5640_TEST_BAR			(0 << 0)
3232 #define OV5640_TEST_RANDOM		(1 << 0)
3233 #define OV5640_TEST_SQUARE		(2 << 0)
3234 #define OV5640_TEST_BLACK		(3 << 0)
3235 
3236 static const u8 test_pattern_val[] = {
3237 	0,
3238 	OV5640_TEST_ENABLE | OV5640_TEST_BAR_VERT_CHANGE_1 |
3239 		OV5640_TEST_BAR,
3240 	OV5640_TEST_ENABLE | OV5640_TEST_ROLLING |
3241 		OV5640_TEST_BAR_VERT_CHANGE_1 | OV5640_TEST_BAR,
3242 	OV5640_TEST_ENABLE | OV5640_TEST_SQUARE,
3243 	OV5640_TEST_ENABLE | OV5640_TEST_ROLLING | OV5640_TEST_SQUARE,
3244 };
3245 
3246 static int ov5640_set_ctrl_test_pattern(struct ov5640_dev *sensor, int value)
3247 {
3248 	return ov5640_write_reg(sensor, OV5640_REG_PRE_ISP_TEST_SET1,
3249 				test_pattern_val[value]);
3250 }
3251 
3252 static int ov5640_set_ctrl_light_freq(struct ov5640_dev *sensor, int value)
3253 {
3254 	int ret;
3255 
3256 	ret = ov5640_mod_reg(sensor, OV5640_REG_HZ5060_CTRL01, BIT(7),
3257 			     (value == V4L2_CID_POWER_LINE_FREQUENCY_AUTO) ?
3258 			     0 : BIT(7));
3259 	if (ret)
3260 		return ret;
3261 
3262 	return ov5640_mod_reg(sensor, OV5640_REG_HZ5060_CTRL00, BIT(2),
3263 			      (value == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) ?
3264 			      BIT(2) : 0);
3265 }
3266 
3267 static int ov5640_set_ctrl_hflip(struct ov5640_dev *sensor, int value)
3268 {
3269 	/*
3270 	 * If sensor is mounted upside down, mirror logic is inversed.
3271 	 *
3272 	 * Sensor is a BSI (Back Side Illuminated) one,
3273 	 * so image captured is physically mirrored.
3274 	 * This is why mirror logic is inversed in
3275 	 * order to cancel this mirror effect.
3276 	 */
3277 
3278 	/*
3279 	 * TIMING TC REG21:
3280 	 * - [2]:	ISP mirror
3281 	 * - [1]:	Sensor mirror
3282 	 */
3283 	return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG21,
3284 			      BIT(2) | BIT(1),
3285 			      (!(value ^ sensor->upside_down)) ?
3286 			      (BIT(2) | BIT(1)) : 0);
3287 }
3288 
3289 static int ov5640_set_ctrl_vflip(struct ov5640_dev *sensor, int value)
3290 {
3291 	/* If sensor is mounted upside down, flip logic is inversed */
3292 
3293 	/*
3294 	 * TIMING TC REG20:
3295 	 * - [2]:	ISP vflip
3296 	 * - [1]:	Sensor vflip
3297 	 */
3298 	return ov5640_mod_reg(sensor, OV5640_REG_TIMING_TC_REG20,
3299 			      BIT(2) | BIT(1),
3300 			      (value ^ sensor->upside_down) ?
3301 			      (BIT(2) | BIT(1)) : 0);
3302 }
3303 
3304 static int ov5640_set_ctrl_vblank(struct ov5640_dev *sensor, int value)
3305 {
3306 	const struct ov5640_mode_info *mode = sensor->current_mode;
3307 
3308 	/* Update the VTOT timing register value. */
3309 	return ov5640_write_reg16(sensor, OV5640_REG_TIMING_VTS,
3310 				  mode->height + value);
3311 }
3312 
3313 static int ov5640_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
3314 {
3315 	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
3316 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3317 	int val;
3318 
3319 	/* v4l2_ctrl_lock() locks our own mutex */
3320 
3321 	if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
3322 		return 0;
3323 
3324 	switch (ctrl->id) {
3325 	case V4L2_CID_AUTOGAIN:
3326 		val = ov5640_get_gain(sensor);
3327 		if (val < 0)
3328 			return val;
3329 		sensor->ctrls.gain->val = val;
3330 		break;
3331 	case V4L2_CID_EXPOSURE_AUTO:
3332 		val = ov5640_get_exposure(sensor);
3333 		if (val < 0)
3334 			return val;
3335 		sensor->ctrls.exposure->val = val;
3336 		break;
3337 	}
3338 
3339 	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
3340 	pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
3341 
3342 	return 0;
3343 }
3344 
3345 static int ov5640_s_ctrl(struct v4l2_ctrl *ctrl)
3346 {
3347 	struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
3348 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3349 	const struct ov5640_mode_info *mode = sensor->current_mode;
3350 	const struct ov5640_timings *timings;
3351 	unsigned int exp_max;
3352 	int ret;
3353 
3354 	/* v4l2_ctrl_lock() locks our own mutex */
3355 
3356 	switch (ctrl->id) {
3357 	case V4L2_CID_VBLANK:
3358 		/* Update the exposure range to the newly programmed vblank. */
3359 		timings = ov5640_timings(sensor, mode);
3360 		exp_max = mode->height + ctrl->val - 4;
3361 		__v4l2_ctrl_modify_range(sensor->ctrls.exposure,
3362 					 sensor->ctrls.exposure->minimum,
3363 					 exp_max, sensor->ctrls.exposure->step,
3364 					 timings->vblank_def);
3365 		break;
3366 	}
3367 
3368 	/*
3369 	 * If the device is not powered up by the host driver do
3370 	 * not apply any controls to H/W at this time. Instead
3371 	 * the controls will be restored at start streaming time.
3372 	 */
3373 	if (!pm_runtime_get_if_in_use(&sensor->i2c_client->dev))
3374 		return 0;
3375 
3376 	switch (ctrl->id) {
3377 	case V4L2_CID_AUTOGAIN:
3378 		ret = ov5640_set_ctrl_gain(sensor, ctrl->val);
3379 		break;
3380 	case V4L2_CID_EXPOSURE_AUTO:
3381 		ret = ov5640_set_ctrl_exposure(sensor, ctrl->val);
3382 		break;
3383 	case V4L2_CID_AUTO_WHITE_BALANCE:
3384 		ret = ov5640_set_ctrl_white_balance(sensor, ctrl->val);
3385 		break;
3386 	case V4L2_CID_HUE:
3387 		ret = ov5640_set_ctrl_hue(sensor, ctrl->val);
3388 		break;
3389 	case V4L2_CID_CONTRAST:
3390 		ret = ov5640_set_ctrl_contrast(sensor, ctrl->val);
3391 		break;
3392 	case V4L2_CID_SATURATION:
3393 		ret = ov5640_set_ctrl_saturation(sensor, ctrl->val);
3394 		break;
3395 	case V4L2_CID_TEST_PATTERN:
3396 		ret = ov5640_set_ctrl_test_pattern(sensor, ctrl->val);
3397 		break;
3398 	case V4L2_CID_POWER_LINE_FREQUENCY:
3399 		ret = ov5640_set_ctrl_light_freq(sensor, ctrl->val);
3400 		break;
3401 	case V4L2_CID_HFLIP:
3402 		ret = ov5640_set_ctrl_hflip(sensor, ctrl->val);
3403 		break;
3404 	case V4L2_CID_VFLIP:
3405 		ret = ov5640_set_ctrl_vflip(sensor, ctrl->val);
3406 		break;
3407 	case V4L2_CID_VBLANK:
3408 		ret = ov5640_set_ctrl_vblank(sensor, ctrl->val);
3409 		break;
3410 	default:
3411 		ret = -EINVAL;
3412 		break;
3413 	}
3414 
3415 	pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
3416 	pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
3417 
3418 	return ret;
3419 }
3420 
3421 static const struct v4l2_ctrl_ops ov5640_ctrl_ops = {
3422 	.g_volatile_ctrl = ov5640_g_volatile_ctrl,
3423 	.s_ctrl = ov5640_s_ctrl,
3424 };
3425 
3426 static int ov5640_init_controls(struct ov5640_dev *sensor)
3427 {
3428 	const struct ov5640_mode_info *mode = sensor->current_mode;
3429 	const struct v4l2_ctrl_ops *ops = &ov5640_ctrl_ops;
3430 	struct ov5640_ctrls *ctrls = &sensor->ctrls;
3431 	struct v4l2_ctrl_handler *hdl = &ctrls->handler;
3432 	struct v4l2_fwnode_device_properties props;
3433 	const struct ov5640_timings *timings;
3434 	unsigned int max_vblank;
3435 	unsigned int hblank;
3436 	int ret;
3437 
3438 	v4l2_ctrl_handler_init(hdl, 32);
3439 
3440 	/* we can use our own mutex for the ctrl lock */
3441 	hdl->lock = &sensor->lock;
3442 
3443 	/* Clock related controls */
3444 	ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
3445 			      ov5640_pixel_rates[OV5640_NUM_PIXEL_RATES - 1],
3446 			      ov5640_pixel_rates[0], 1,
3447 			      ov5640_pixel_rates[mode->pixel_rate]);
3448 
3449 	ctrls->link_freq = v4l2_ctrl_new_int_menu(hdl, ops,
3450 					V4L2_CID_LINK_FREQ,
3451 					ARRAY_SIZE(ov5640_csi2_link_freqs) - 1,
3452 					OV5640_DEFAULT_LINK_FREQ,
3453 					ov5640_csi2_link_freqs);
3454 
3455 	timings = ov5640_timings(sensor, mode);
3456 	hblank = timings->htot - mode->width;
3457 	ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, hblank,
3458 					  hblank, 1, hblank);
3459 
3460 	max_vblank = OV5640_MAX_VTS - mode->height;
3461 	ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK,
3462 					  OV5640_MIN_VBLANK, max_vblank,
3463 					  1, timings->vblank_def);
3464 
3465 	/* Auto/manual white balance */
3466 	ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
3467 					   V4L2_CID_AUTO_WHITE_BALANCE,
3468 					   0, 1, 1, 1);
3469 	ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE,
3470 						0, 4095, 1, 0);
3471 	ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE,
3472 					       0, 4095, 1, 0);
3473 	/* Auto/manual exposure */
3474 	ctrls->auto_exp = v4l2_ctrl_new_std_menu(hdl, ops,
3475 						 V4L2_CID_EXPOSURE_AUTO,
3476 						 V4L2_EXPOSURE_MANUAL, 0,
3477 						 V4L2_EXPOSURE_AUTO);
3478 	ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
3479 					    0, 65535, 1, 0);
3480 	/* Auto/manual gain */
3481 	ctrls->auto_gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_AUTOGAIN,
3482 					     0, 1, 1, 1);
3483 	ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN,
3484 					0, 1023, 1, 0);
3485 
3486 	ctrls->saturation = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_SATURATION,
3487 					      0, 255, 1, 64);
3488 	ctrls->hue = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HUE,
3489 				       0, 359, 1, 0);
3490 	ctrls->contrast = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST,
3491 					    0, 255, 1, 0);
3492 	ctrls->test_pattern =
3493 		v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN,
3494 					     ARRAY_SIZE(test_pattern_menu) - 1,
3495 					     0, 0, test_pattern_menu);
3496 	ctrls->hflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP,
3497 					 0, 1, 1, 0);
3498 	ctrls->vflip = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP,
3499 					 0, 1, 1, 0);
3500 
3501 	ctrls->light_freq =
3502 		v4l2_ctrl_new_std_menu(hdl, ops,
3503 				       V4L2_CID_POWER_LINE_FREQUENCY,
3504 				       V4L2_CID_POWER_LINE_FREQUENCY_AUTO, 0,
3505 				       V4L2_CID_POWER_LINE_FREQUENCY_50HZ);
3506 
3507 	if (hdl->error) {
3508 		ret = hdl->error;
3509 		goto free_ctrls;
3510 	}
3511 
3512 	ret = v4l2_fwnode_device_parse(&sensor->i2c_client->dev, &props);
3513 	if (ret)
3514 		goto free_ctrls;
3515 
3516 	if (props.rotation == 180)
3517 		sensor->upside_down = true;
3518 
3519 	ret = v4l2_ctrl_new_fwnode_properties(hdl, ops, &props);
3520 	if (ret)
3521 		goto free_ctrls;
3522 
3523 	ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
3524 	ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
3525 	ctrls->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
3526 	ctrls->gain->flags |= V4L2_CTRL_FLAG_VOLATILE;
3527 	ctrls->exposure->flags |= V4L2_CTRL_FLAG_VOLATILE;
3528 
3529 	v4l2_ctrl_auto_cluster(3, &ctrls->auto_wb, 0, false);
3530 	v4l2_ctrl_auto_cluster(2, &ctrls->auto_gain, 0, true);
3531 	v4l2_ctrl_auto_cluster(2, &ctrls->auto_exp, 1, true);
3532 
3533 	sensor->sd.ctrl_handler = hdl;
3534 	return 0;
3535 
3536 free_ctrls:
3537 	v4l2_ctrl_handler_free(hdl);
3538 	return ret;
3539 }
3540 
3541 static int ov5640_enum_frame_size(struct v4l2_subdev *sd,
3542 				  struct v4l2_subdev_state *sd_state,
3543 				  struct v4l2_subdev_frame_size_enum *fse)
3544 {
3545 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3546 	u32 bpp = ov5640_code_to_bpp(sensor, fse->code);
3547 	unsigned int index = fse->index;
3548 
3549 	if (fse->pad != 0)
3550 		return -EINVAL;
3551 	if (!bpp)
3552 		return -EINVAL;
3553 
3554 	/* Only low-resolution modes are supported for 24bpp formats. */
3555 	if (bpp == 24 && index >= OV5640_MODE_720P_1280_720)
3556 		return -EINVAL;
3557 
3558 	/* FIXME: Low resolution modes don't work in 8bpp formats. */
3559 	if (bpp == 8)
3560 		index += OV5640_MODE_720P_1280_720;
3561 
3562 	if (index >= OV5640_NUM_MODES)
3563 		return -EINVAL;
3564 
3565 	fse->min_width = ov5640_mode_data[index].width;
3566 	fse->max_width = fse->min_width;
3567 	fse->min_height = ov5640_mode_data[index].height;
3568 	fse->max_height = fse->min_height;
3569 
3570 	return 0;
3571 }
3572 
3573 static int ov5640_enum_frame_interval(
3574 	struct v4l2_subdev *sd,
3575 	struct v4l2_subdev_state *sd_state,
3576 	struct v4l2_subdev_frame_interval_enum *fie)
3577 {
3578 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3579 	const struct ov5640_mode_info *mode;
3580 	struct v4l2_fract tpf;
3581 	int ret;
3582 
3583 	if (fie->pad != 0)
3584 		return -EINVAL;
3585 	if (fie->index >= OV5640_NUM_FRAMERATES)
3586 		return -EINVAL;
3587 
3588 	mode = ov5640_find_mode(sensor, fie->width, fie->height, false);
3589 	if (!mode)
3590 		return -EINVAL;
3591 
3592 	tpf.numerator = 1;
3593 	tpf.denominator = ov5640_framerates[fie->index];
3594 
3595 	ret = ov5640_try_frame_interval(sensor, &tpf, mode);
3596 	if (ret < 0)
3597 		return -EINVAL;
3598 
3599 	fie->interval = tpf;
3600 	return 0;
3601 }
3602 
3603 static int ov5640_g_frame_interval(struct v4l2_subdev *sd,
3604 				   struct v4l2_subdev_frame_interval *fi)
3605 {
3606 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3607 
3608 	mutex_lock(&sensor->lock);
3609 	fi->interval = sensor->frame_interval;
3610 	mutex_unlock(&sensor->lock);
3611 
3612 	return 0;
3613 }
3614 
3615 static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
3616 				   struct v4l2_subdev_frame_interval *fi)
3617 {
3618 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3619 	const struct ov5640_mode_info *mode;
3620 	int frame_rate, ret = 0;
3621 
3622 	if (fi->pad != 0)
3623 		return -EINVAL;
3624 
3625 	mutex_lock(&sensor->lock);
3626 
3627 	if (sensor->streaming) {
3628 		ret = -EBUSY;
3629 		goto out;
3630 	}
3631 
3632 	mode = sensor->current_mode;
3633 
3634 	frame_rate = ov5640_try_frame_interval(sensor, &fi->interval, mode);
3635 	if (frame_rate < 0) {
3636 		/* Always return a valid frame interval value */
3637 		fi->interval = sensor->frame_interval;
3638 		goto out;
3639 	}
3640 
3641 	mode = ov5640_find_mode(sensor, mode->width, mode->height, true);
3642 	if (!mode) {
3643 		ret = -EINVAL;
3644 		goto out;
3645 	}
3646 
3647 	if (ov5640_framerates[frame_rate] > ov5640_framerates[mode->max_fps]) {
3648 		ret = -EINVAL;
3649 		goto out;
3650 	}
3651 
3652 	if (mode != sensor->current_mode ||
3653 	    frame_rate != sensor->current_fr) {
3654 		sensor->current_fr = frame_rate;
3655 		sensor->frame_interval = fi->interval;
3656 		sensor->current_mode = mode;
3657 		sensor->pending_mode_change = true;
3658 
3659 		ov5640_update_pixel_rate(sensor);
3660 	}
3661 out:
3662 	mutex_unlock(&sensor->lock);
3663 	return ret;
3664 }
3665 
3666 static int ov5640_enum_mbus_code(struct v4l2_subdev *sd,
3667 				 struct v4l2_subdev_state *sd_state,
3668 				 struct v4l2_subdev_mbus_code_enum *code)
3669 {
3670 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3671 	const struct ov5640_pixfmt *formats;
3672 	unsigned int num_formats;
3673 
3674 	if (ov5640_is_csi2(sensor)) {
3675 		formats = ov5640_csi2_formats;
3676 		num_formats = ARRAY_SIZE(ov5640_csi2_formats) - 1;
3677 	} else {
3678 		formats = ov5640_dvp_formats;
3679 		num_formats = ARRAY_SIZE(ov5640_dvp_formats) - 1;
3680 	}
3681 
3682 	if (code->index >= num_formats)
3683 		return -EINVAL;
3684 
3685 	code->code = formats[code->index].code;
3686 
3687 	return 0;
3688 }
3689 
3690 static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
3691 {
3692 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3693 	int ret = 0;
3694 
3695 	if (enable) {
3696 		ret = pm_runtime_resume_and_get(&sensor->i2c_client->dev);
3697 		if (ret < 0)
3698 			return ret;
3699 
3700 		ret = v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
3701 		if (ret) {
3702 			pm_runtime_put(&sensor->i2c_client->dev);
3703 			return ret;
3704 		}
3705 	}
3706 
3707 	mutex_lock(&sensor->lock);
3708 
3709 	if (sensor->streaming == !enable) {
3710 		if (enable && sensor->pending_mode_change) {
3711 			ret = ov5640_set_mode(sensor);
3712 			if (ret)
3713 				goto out;
3714 		}
3715 
3716 		if (enable && sensor->pending_fmt_change) {
3717 			ret = ov5640_set_framefmt(sensor, &sensor->fmt);
3718 			if (ret)
3719 				goto out;
3720 			sensor->pending_fmt_change = false;
3721 		}
3722 
3723 		if (ov5640_is_csi2(sensor))
3724 			ret = ov5640_set_stream_mipi(sensor, enable);
3725 		else
3726 			ret = ov5640_set_stream_dvp(sensor, enable);
3727 
3728 		if (!ret)
3729 			sensor->streaming = enable;
3730 	}
3731 
3732 out:
3733 	mutex_unlock(&sensor->lock);
3734 
3735 	if (!enable || ret) {
3736 		pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
3737 		pm_runtime_put_autosuspend(&sensor->i2c_client->dev);
3738 	}
3739 
3740 	return ret;
3741 }
3742 
3743 static int ov5640_init_cfg(struct v4l2_subdev *sd,
3744 			   struct v4l2_subdev_state *state)
3745 {
3746 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3747 	struct v4l2_mbus_framefmt *fmt =
3748 				v4l2_subdev_get_try_format(sd, state, 0);
3749 	struct v4l2_rect *crop = v4l2_subdev_get_try_crop(sd, state, 0);
3750 
3751 	*fmt = ov5640_is_csi2(sensor) ? ov5640_csi2_default_fmt :
3752 					ov5640_dvp_default_fmt;
3753 
3754 	crop->left = OV5640_PIXEL_ARRAY_LEFT;
3755 	crop->top = OV5640_PIXEL_ARRAY_TOP;
3756 	crop->width = OV5640_PIXEL_ARRAY_WIDTH;
3757 	crop->height = OV5640_PIXEL_ARRAY_HEIGHT;
3758 
3759 	return 0;
3760 }
3761 
3762 static const struct v4l2_subdev_core_ops ov5640_core_ops = {
3763 	.log_status = v4l2_ctrl_subdev_log_status,
3764 	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
3765 	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
3766 };
3767 
3768 static const struct v4l2_subdev_video_ops ov5640_video_ops = {
3769 	.g_frame_interval = ov5640_g_frame_interval,
3770 	.s_frame_interval = ov5640_s_frame_interval,
3771 	.s_stream = ov5640_s_stream,
3772 };
3773 
3774 static const struct v4l2_subdev_pad_ops ov5640_pad_ops = {
3775 	.init_cfg = ov5640_init_cfg,
3776 	.enum_mbus_code = ov5640_enum_mbus_code,
3777 	.get_fmt = ov5640_get_fmt,
3778 	.set_fmt = ov5640_set_fmt,
3779 	.get_selection = ov5640_get_selection,
3780 	.enum_frame_size = ov5640_enum_frame_size,
3781 	.enum_frame_interval = ov5640_enum_frame_interval,
3782 };
3783 
3784 static const struct v4l2_subdev_ops ov5640_subdev_ops = {
3785 	.core = &ov5640_core_ops,
3786 	.video = &ov5640_video_ops,
3787 	.pad = &ov5640_pad_ops,
3788 };
3789 
3790 static int ov5640_get_regulators(struct ov5640_dev *sensor)
3791 {
3792 	int i;
3793 
3794 	for (i = 0; i < OV5640_NUM_SUPPLIES; i++)
3795 		sensor->supplies[i].supply = ov5640_supply_name[i];
3796 
3797 	return devm_regulator_bulk_get(&sensor->i2c_client->dev,
3798 				       OV5640_NUM_SUPPLIES,
3799 				       sensor->supplies);
3800 }
3801 
3802 static int ov5640_check_chip_id(struct ov5640_dev *sensor)
3803 {
3804 	struct i2c_client *client = sensor->i2c_client;
3805 	int ret = 0;
3806 	u16 chip_id;
3807 
3808 	ret = ov5640_read_reg16(sensor, OV5640_REG_CHIP_ID, &chip_id);
3809 	if (ret) {
3810 		dev_err(&client->dev, "%s: failed to read chip identifier\n",
3811 			__func__);
3812 		return ret;
3813 	}
3814 
3815 	if (chip_id != 0x5640) {
3816 		dev_err(&client->dev, "%s: wrong chip identifier, expected 0x5640, got 0x%x\n",
3817 			__func__, chip_id);
3818 		return -ENXIO;
3819 	}
3820 
3821 	return 0;
3822 }
3823 
3824 static int ov5640_probe(struct i2c_client *client)
3825 {
3826 	struct device *dev = &client->dev;
3827 	struct fwnode_handle *endpoint;
3828 	struct ov5640_dev *sensor;
3829 	int ret;
3830 
3831 	sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
3832 	if (!sensor)
3833 		return -ENOMEM;
3834 
3835 	sensor->i2c_client = client;
3836 
3837 	/*
3838 	 * default init sequence initialize sensor to
3839 	 * YUV422 UYVY VGA(30FPS in parallel mode, 60 in MIPI CSI-2 mode)
3840 	 */
3841 	sensor->frame_interval.numerator = 1;
3842 	sensor->frame_interval.denominator = ov5640_framerates[OV5640_30_FPS];
3843 	sensor->current_fr = OV5640_30_FPS;
3844 	sensor->current_mode =
3845 		&ov5640_mode_data[OV5640_MODE_VGA_640_480];
3846 	sensor->last_mode = sensor->current_mode;
3847 	sensor->current_link_freq =
3848 		ov5640_csi2_link_freqs[OV5640_DEFAULT_LINK_FREQ];
3849 
3850 	sensor->ae_target = 52;
3851 
3852 	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev),
3853 						  NULL);
3854 	if (!endpoint) {
3855 		dev_err(dev, "endpoint node not found\n");
3856 		return -EINVAL;
3857 	}
3858 
3859 	ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep);
3860 	fwnode_handle_put(endpoint);
3861 	if (ret) {
3862 		dev_err(dev, "Could not parse endpoint\n");
3863 		return ret;
3864 	}
3865 
3866 	if (sensor->ep.bus_type != V4L2_MBUS_PARALLEL &&
3867 	    sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY &&
3868 	    sensor->ep.bus_type != V4L2_MBUS_BT656) {
3869 		dev_err(dev, "Unsupported bus type %d\n", sensor->ep.bus_type);
3870 		return -EINVAL;
3871 	}
3872 
3873 	sensor->fmt = ov5640_is_csi2(sensor) ? ov5640_csi2_default_fmt :
3874 					       ov5640_dvp_default_fmt;
3875 
3876 	/* get system clock (xclk) */
3877 	sensor->xclk = devm_clk_get(dev, "xclk");
3878 	if (IS_ERR(sensor->xclk)) {
3879 		dev_err(dev, "failed to get xclk\n");
3880 		return PTR_ERR(sensor->xclk);
3881 	}
3882 
3883 	sensor->xclk_freq = clk_get_rate(sensor->xclk);
3884 	if (sensor->xclk_freq < OV5640_XCLK_MIN ||
3885 	    sensor->xclk_freq > OV5640_XCLK_MAX) {
3886 		dev_err(dev, "xclk frequency out of range: %d Hz\n",
3887 			sensor->xclk_freq);
3888 		return -EINVAL;
3889 	}
3890 
3891 	/* request optional power down pin */
3892 	sensor->pwdn_gpio = devm_gpiod_get_optional(dev, "powerdown",
3893 						    GPIOD_OUT_HIGH);
3894 	if (IS_ERR(sensor->pwdn_gpio))
3895 		return PTR_ERR(sensor->pwdn_gpio);
3896 
3897 	/* request optional reset pin */
3898 	sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset",
3899 						     GPIOD_OUT_HIGH);
3900 	if (IS_ERR(sensor->reset_gpio))
3901 		return PTR_ERR(sensor->reset_gpio);
3902 
3903 	v4l2_i2c_subdev_init(&sensor->sd, client, &ov5640_subdev_ops);
3904 
3905 	sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
3906 			    V4L2_SUBDEV_FL_HAS_EVENTS;
3907 	sensor->pad.flags = MEDIA_PAD_FL_SOURCE;
3908 	sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
3909 	ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad);
3910 	if (ret)
3911 		return ret;
3912 
3913 	ret = ov5640_get_regulators(sensor);
3914 	if (ret)
3915 		goto entity_cleanup;
3916 
3917 	mutex_init(&sensor->lock);
3918 
3919 	ret = ov5640_init_controls(sensor);
3920 	if (ret)
3921 		goto entity_cleanup;
3922 
3923 	ret = ov5640_sensor_resume(dev);
3924 	if (ret) {
3925 		dev_err(dev, "failed to power on\n");
3926 		goto entity_cleanup;
3927 	}
3928 
3929 	pm_runtime_set_active(dev);
3930 	pm_runtime_get_noresume(dev);
3931 	pm_runtime_enable(dev);
3932 
3933 	ret = ov5640_check_chip_id(sensor);
3934 	if (ret)
3935 		goto err_pm_runtime;
3936 
3937 	ret = v4l2_async_register_subdev_sensor(&sensor->sd);
3938 	if (ret)
3939 		goto err_pm_runtime;
3940 
3941 	pm_runtime_set_autosuspend_delay(dev, 1000);
3942 	pm_runtime_use_autosuspend(dev);
3943 	pm_runtime_mark_last_busy(dev);
3944 	pm_runtime_put_autosuspend(dev);
3945 
3946 	return 0;
3947 
3948 err_pm_runtime:
3949 	pm_runtime_put_noidle(dev);
3950 	pm_runtime_disable(dev);
3951 	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
3952 	ov5640_sensor_suspend(dev);
3953 entity_cleanup:
3954 	media_entity_cleanup(&sensor->sd.entity);
3955 	mutex_destroy(&sensor->lock);
3956 	return ret;
3957 }
3958 
3959 static void ov5640_remove(struct i2c_client *client)
3960 {
3961 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
3962 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
3963 	struct device *dev = &client->dev;
3964 
3965 	pm_runtime_disable(dev);
3966 	if (!pm_runtime_status_suspended(dev))
3967 		ov5640_sensor_suspend(dev);
3968 	pm_runtime_set_suspended(dev);
3969 
3970 	v4l2_async_unregister_subdev(&sensor->sd);
3971 	media_entity_cleanup(&sensor->sd.entity);
3972 	v4l2_ctrl_handler_free(&sensor->ctrls.handler);
3973 	mutex_destroy(&sensor->lock);
3974 }
3975 
3976 static const struct dev_pm_ops ov5640_pm_ops = {
3977 	SET_RUNTIME_PM_OPS(ov5640_sensor_suspend, ov5640_sensor_resume, NULL)
3978 };
3979 
3980 static const struct i2c_device_id ov5640_id[] = {
3981 	{"ov5640", 0},
3982 	{},
3983 };
3984 MODULE_DEVICE_TABLE(i2c, ov5640_id);
3985 
3986 static const struct of_device_id ov5640_dt_ids[] = {
3987 	{ .compatible = "ovti,ov5640" },
3988 	{ /* sentinel */ }
3989 };
3990 MODULE_DEVICE_TABLE(of, ov5640_dt_ids);
3991 
3992 static struct i2c_driver ov5640_i2c_driver = {
3993 	.driver = {
3994 		.name  = "ov5640",
3995 		.of_match_table	= ov5640_dt_ids,
3996 		.pm = &ov5640_pm_ops,
3997 	},
3998 	.id_table = ov5640_id,
3999 	.probe    = ov5640_probe,
4000 	.remove   = ov5640_remove,
4001 };
4002 
4003 module_i2c_driver(ov5640_i2c_driver);
4004 
4005 MODULE_DESCRIPTION("OV5640 MIPI Camera Subdev Driver");
4006 MODULE_LICENSE("GPL");
4007