1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * ov2685 driver 4 * 5 * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd. 6 */ 7 8 #include <linux/clk.h> 9 #include <linux/device.h> 10 #include <linux/delay.h> 11 #include <linux/gpio/consumer.h> 12 #include <linux/i2c.h> 13 #include <linux/module.h> 14 #include <linux/pm_runtime.h> 15 #include <linux/regulator/consumer.h> 16 #include <linux/sysfs.h> 17 #include <media/media-entity.h> 18 #include <media/v4l2-async.h> 19 #include <media/v4l2-ctrls.h> 20 #include <media/v4l2-subdev.h> 21 22 #define CHIP_ID 0x2685 23 #define OV2685_REG_CHIP_ID 0x300a 24 25 #define OV2685_XVCLK_FREQ 24000000 26 27 #define REG_SC_CTRL_MODE 0x0100 28 #define SC_CTRL_MODE_STANDBY 0x0 29 #define SC_CTRL_MODE_STREAMING BIT(0) 30 31 #define OV2685_REG_EXPOSURE 0x3500 32 #define OV2685_EXPOSURE_MIN 4 33 #define OV2685_EXPOSURE_STEP 1 34 35 #define OV2685_REG_VTS 0x380e 36 #define OV2685_VTS_MAX 0x7fff 37 38 #define OV2685_REG_GAIN 0x350a 39 #define OV2685_GAIN_MIN 0 40 #define OV2685_GAIN_MAX 0x07ff 41 #define OV2685_GAIN_STEP 0x1 42 #define OV2685_GAIN_DEFAULT 0x0036 43 44 #define OV2685_REG_TEST_PATTERN 0x5080 45 #define OV2685_TEST_PATTERN_DISABLED 0x00 46 #define OV2685_TEST_PATTERN_COLOR_BAR 0x80 47 #define OV2685_TEST_PATTERN_RANDOM 0x81 48 #define OV2685_TEST_PATTERN_COLOR_BAR_FADE 0x88 49 #define OV2685_TEST_PATTERN_BW_SQUARE 0x92 50 #define OV2685_TEST_PATTERN_COLOR_SQUARE 0x82 51 52 #define REG_NULL 0xFFFF 53 54 #define OV2685_REG_VALUE_08BIT 1 55 #define OV2685_REG_VALUE_16BIT 2 56 #define OV2685_REG_VALUE_24BIT 3 57 58 #define OV2685_LANES 1 59 #define OV2685_BITS_PER_SAMPLE 10 60 61 static const char * const ov2685_supply_names[] = { 62 "avdd", /* Analog power */ 63 "dovdd", /* Digital I/O power */ 64 "dvdd", /* Digital core power */ 65 }; 66 67 #define OV2685_NUM_SUPPLIES ARRAY_SIZE(ov2685_supply_names) 68 69 struct regval { 70 u16 addr; 71 u8 val; 72 }; 73 74 struct ov2685_mode { 75 u32 width; 76 u32 height; 77 u32 exp_def; 78 u32 hts_def; 79 u32 vts_def; 80 const struct regval *reg_list; 81 }; 82 83 struct ov2685 { 84 struct i2c_client *client; 85 struct clk *xvclk; 86 struct gpio_desc *reset_gpio; 87 struct regulator_bulk_data supplies[OV2685_NUM_SUPPLIES]; 88 89 bool streaming; 90 struct mutex mutex; 91 struct v4l2_subdev subdev; 92 struct media_pad pad; 93 struct v4l2_ctrl *anal_gain; 94 struct v4l2_ctrl *exposure; 95 struct v4l2_ctrl *hblank; 96 struct v4l2_ctrl *vblank; 97 struct v4l2_ctrl *test_pattern; 98 struct v4l2_ctrl_handler ctrl_handler; 99 100 const struct ov2685_mode *cur_mode; 101 }; 102 103 #define to_ov2685(sd) container_of(sd, struct ov2685, subdev) 104 105 /* PLL settings bases on 24M xvclk */ 106 static struct regval ov2685_1600x1200_regs[] = { 107 {0x0103, 0x01}, 108 {0x0100, 0x00}, 109 {0x3002, 0x00}, 110 {0x3016, 0x1c}, 111 {0x3018, 0x44}, 112 {0x301d, 0xf0}, 113 {0x3020, 0x00}, 114 {0x3082, 0x37}, 115 {0x3083, 0x03}, 116 {0x3084, 0x09}, 117 {0x3085, 0x04}, 118 {0x3086, 0x00}, 119 {0x3087, 0x00}, 120 {0x3501, 0x4e}, 121 {0x3502, 0xe0}, 122 {0x3503, 0x27}, 123 {0x350b, 0x36}, 124 {0x3600, 0xb4}, 125 {0x3603, 0x35}, 126 {0x3604, 0x24}, 127 {0x3605, 0x00}, 128 {0x3620, 0x24}, 129 {0x3621, 0x34}, 130 {0x3622, 0x03}, 131 {0x3628, 0x10}, 132 {0x3705, 0x3c}, 133 {0x370a, 0x21}, 134 {0x370c, 0x50}, 135 {0x370d, 0xc0}, 136 {0x3717, 0x58}, 137 {0x3718, 0x80}, 138 {0x3720, 0x00}, 139 {0x3721, 0x09}, 140 {0x3722, 0x06}, 141 {0x3723, 0x59}, 142 {0x3738, 0x99}, 143 {0x3781, 0x80}, 144 {0x3784, 0x0c}, 145 {0x3789, 0x60}, 146 {0x3800, 0x00}, 147 {0x3801, 0x00}, 148 {0x3802, 0x00}, 149 {0x3803, 0x00}, 150 {0x3804, 0x06}, 151 {0x3805, 0x4f}, 152 {0x3806, 0x04}, 153 {0x3807, 0xbf}, 154 {0x3808, 0x06}, 155 {0x3809, 0x40}, 156 {0x380a, 0x04}, 157 {0x380b, 0xb0}, 158 {0x380c, 0x06}, 159 {0x380d, 0xa4}, 160 {0x380e, 0x05}, 161 {0x380f, 0x0e}, 162 {0x3810, 0x00}, 163 {0x3811, 0x08}, 164 {0x3812, 0x00}, 165 {0x3813, 0x08}, 166 {0x3814, 0x11}, 167 {0x3815, 0x11}, 168 {0x3819, 0x04}, 169 {0x3820, 0xc0}, 170 {0x3821, 0x00}, 171 {0x3a06, 0x01}, 172 {0x3a07, 0x84}, 173 {0x3a08, 0x01}, 174 {0x3a09, 0x43}, 175 {0x3a0a, 0x24}, 176 {0x3a0b, 0x60}, 177 {0x3a0c, 0x28}, 178 {0x3a0d, 0x60}, 179 {0x3a0e, 0x04}, 180 {0x3a0f, 0x8c}, 181 {0x3a10, 0x05}, 182 {0x3a11, 0x0c}, 183 {0x4000, 0x81}, 184 {0x4001, 0x40}, 185 {0x4008, 0x02}, 186 {0x4009, 0x09}, 187 {0x4300, 0x00}, 188 {0x430e, 0x00}, 189 {0x4602, 0x02}, 190 {0x481b, 0x40}, 191 {0x481f, 0x40}, 192 {0x4837, 0x18}, 193 {0x5000, 0x1f}, 194 {0x5001, 0x05}, 195 {0x5002, 0x30}, 196 {0x5003, 0x04}, 197 {0x5004, 0x00}, 198 {0x5005, 0x0c}, 199 {0x5280, 0x15}, 200 {0x5281, 0x06}, 201 {0x5282, 0x06}, 202 {0x5283, 0x08}, 203 {0x5284, 0x1c}, 204 {0x5285, 0x1c}, 205 {0x5286, 0x20}, 206 {0x5287, 0x10}, 207 {REG_NULL, 0x00} 208 }; 209 210 #define OV2685_LINK_FREQ_330MHZ 330000000 211 static const s64 link_freq_menu_items[] = { 212 OV2685_LINK_FREQ_330MHZ 213 }; 214 215 static const char * const ov2685_test_pattern_menu[] = { 216 "Disabled", 217 "Color Bar", 218 "Color Bar FADE", 219 "Random Data", 220 "Black White Square", 221 "Color Square" 222 }; 223 224 static const int ov2685_test_pattern_val[] = { 225 OV2685_TEST_PATTERN_DISABLED, 226 OV2685_TEST_PATTERN_COLOR_BAR, 227 OV2685_TEST_PATTERN_COLOR_BAR_FADE, 228 OV2685_TEST_PATTERN_RANDOM, 229 OV2685_TEST_PATTERN_BW_SQUARE, 230 OV2685_TEST_PATTERN_COLOR_SQUARE, 231 }; 232 233 static const struct ov2685_mode supported_modes[] = { 234 { 235 .width = 1600, 236 .height = 1200, 237 .exp_def = 0x04ee, 238 .hts_def = 0x06a4, 239 .vts_def = 0x050e, 240 .reg_list = ov2685_1600x1200_regs, 241 }, 242 }; 243 244 /* Write registers up to 4 at a time */ 245 static int ov2685_write_reg(struct i2c_client *client, u16 reg, 246 u32 len, u32 val) 247 { 248 u32 val_i, buf_i; 249 u8 buf[6]; 250 u8 *val_p; 251 __be32 val_be; 252 253 if (len > 4) 254 return -EINVAL; 255 256 buf[0] = reg >> 8; 257 buf[1] = reg & 0xff; 258 259 val_be = cpu_to_be32(val); 260 val_p = (u8 *)&val_be; 261 buf_i = 2; 262 val_i = 4 - len; 263 264 while (val_i < 4) 265 buf[buf_i++] = val_p[val_i++]; 266 267 if (i2c_master_send(client, buf, len + 2) != len + 2) 268 return -EIO; 269 270 return 0; 271 } 272 273 static int ov2685_write_array(struct i2c_client *client, 274 const struct regval *regs) 275 { 276 int ret = 0; 277 u32 i; 278 279 for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++) 280 ret = ov2685_write_reg(client, regs[i].addr, 281 OV2685_REG_VALUE_08BIT, regs[i].val); 282 283 return ret; 284 } 285 286 /* Read registers up to 4 at a time */ 287 static int ov2685_read_reg(struct i2c_client *client, u16 reg, 288 u32 len, u32 *val) 289 { 290 struct i2c_msg msgs[2]; 291 u8 *data_be_p; 292 __be32 data_be = 0; 293 __be16 reg_addr_be = cpu_to_be16(reg); 294 int ret; 295 296 if (len > 4) 297 return -EINVAL; 298 299 data_be_p = (u8 *)&data_be; 300 /* Write register address */ 301 msgs[0].addr = client->addr; 302 msgs[0].flags = 0; 303 msgs[0].len = 2; 304 msgs[0].buf = (u8 *)®_addr_be; 305 306 /* Read data from register */ 307 msgs[1].addr = client->addr; 308 msgs[1].flags = I2C_M_RD; 309 msgs[1].len = len; 310 msgs[1].buf = &data_be_p[4 - len]; 311 312 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); 313 if (ret != ARRAY_SIZE(msgs)) 314 return -EIO; 315 316 *val = be32_to_cpu(data_be); 317 318 return 0; 319 } 320 321 static void ov2685_fill_fmt(const struct ov2685_mode *mode, 322 struct v4l2_mbus_framefmt *fmt) 323 { 324 fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10; 325 fmt->width = mode->width; 326 fmt->height = mode->height; 327 fmt->field = V4L2_FIELD_NONE; 328 } 329 330 static int ov2685_set_fmt(struct v4l2_subdev *sd, 331 struct v4l2_subdev_state *sd_state, 332 struct v4l2_subdev_format *fmt) 333 { 334 struct ov2685 *ov2685 = to_ov2685(sd); 335 struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; 336 337 /* only one mode supported for now */ 338 ov2685_fill_fmt(ov2685->cur_mode, mbus_fmt); 339 340 return 0; 341 } 342 343 static int ov2685_get_fmt(struct v4l2_subdev *sd, 344 struct v4l2_subdev_state *sd_state, 345 struct v4l2_subdev_format *fmt) 346 { 347 struct ov2685 *ov2685 = to_ov2685(sd); 348 struct v4l2_mbus_framefmt *mbus_fmt = &fmt->format; 349 350 ov2685_fill_fmt(ov2685->cur_mode, mbus_fmt); 351 352 return 0; 353 } 354 355 static int ov2685_enum_mbus_code(struct v4l2_subdev *sd, 356 struct v4l2_subdev_state *sd_state, 357 struct v4l2_subdev_mbus_code_enum *code) 358 { 359 if (code->index >= ARRAY_SIZE(supported_modes)) 360 return -EINVAL; 361 362 code->code = MEDIA_BUS_FMT_SBGGR10_1X10; 363 364 return 0; 365 } 366 367 static int ov2685_enum_frame_sizes(struct v4l2_subdev *sd, 368 struct v4l2_subdev_state *sd_state, 369 struct v4l2_subdev_frame_size_enum *fse) 370 { 371 int index = fse->index; 372 373 if (index >= ARRAY_SIZE(supported_modes)) 374 return -EINVAL; 375 376 fse->code = MEDIA_BUS_FMT_SBGGR10_1X10; 377 378 fse->min_width = supported_modes[index].width; 379 fse->max_width = supported_modes[index].width; 380 fse->max_height = supported_modes[index].height; 381 fse->min_height = supported_modes[index].height; 382 383 return 0; 384 } 385 386 /* Calculate the delay in us by clock rate and clock cycles */ 387 static inline u32 ov2685_cal_delay(u32 cycles) 388 { 389 return DIV_ROUND_UP(cycles, OV2685_XVCLK_FREQ / 1000 / 1000); 390 } 391 392 static int __ov2685_power_on(struct ov2685 *ov2685) 393 { 394 int ret; 395 u32 delay_us; 396 struct device *dev = &ov2685->client->dev; 397 398 ret = clk_prepare_enable(ov2685->xvclk); 399 if (ret < 0) { 400 dev_err(dev, "Failed to enable xvclk\n"); 401 return ret; 402 } 403 404 gpiod_set_value_cansleep(ov2685->reset_gpio, 1); 405 406 ret = regulator_bulk_enable(OV2685_NUM_SUPPLIES, ov2685->supplies); 407 if (ret < 0) { 408 dev_err(dev, "Failed to enable regulators\n"); 409 goto disable_clk; 410 } 411 412 /* The minimum delay between power supplies and reset rising can be 0 */ 413 gpiod_set_value_cansleep(ov2685->reset_gpio, 0); 414 /* 8192 xvclk cycles prior to the first SCCB transaction */ 415 delay_us = ov2685_cal_delay(8192); 416 usleep_range(delay_us, delay_us * 2); 417 418 /* HACK: ov2685 would output messy data after reset(R0103), 419 * writing register before .s_stream() as a workaround 420 */ 421 ret = ov2685_write_array(ov2685->client, ov2685->cur_mode->reg_list); 422 if (ret) 423 goto disable_supplies; 424 425 return 0; 426 427 disable_supplies: 428 regulator_bulk_disable(OV2685_NUM_SUPPLIES, ov2685->supplies); 429 disable_clk: 430 clk_disable_unprepare(ov2685->xvclk); 431 432 return ret; 433 } 434 435 static void __ov2685_power_off(struct ov2685 *ov2685) 436 { 437 /* 512 xvclk cycles after the last SCCB transaction or MIPI frame end */ 438 u32 delay_us = ov2685_cal_delay(512); 439 440 usleep_range(delay_us, delay_us * 2); 441 clk_disable_unprepare(ov2685->xvclk); 442 gpiod_set_value_cansleep(ov2685->reset_gpio, 1); 443 regulator_bulk_disable(OV2685_NUM_SUPPLIES, ov2685->supplies); 444 } 445 446 static int ov2685_s_stream(struct v4l2_subdev *sd, int on) 447 { 448 struct ov2685 *ov2685 = to_ov2685(sd); 449 struct i2c_client *client = ov2685->client; 450 int ret = 0; 451 452 mutex_lock(&ov2685->mutex); 453 454 on = !!on; 455 if (on == ov2685->streaming) 456 goto unlock_and_return; 457 458 if (on) { 459 ret = pm_runtime_resume_and_get(&ov2685->client->dev); 460 if (ret < 0) 461 goto unlock_and_return; 462 463 ret = __v4l2_ctrl_handler_setup(&ov2685->ctrl_handler); 464 if (ret) { 465 pm_runtime_put(&client->dev); 466 goto unlock_and_return; 467 } 468 ret = ov2685_write_reg(client, REG_SC_CTRL_MODE, 469 OV2685_REG_VALUE_08BIT, SC_CTRL_MODE_STREAMING); 470 if (ret) { 471 pm_runtime_put(&client->dev); 472 goto unlock_and_return; 473 } 474 } else { 475 ov2685_write_reg(client, REG_SC_CTRL_MODE, 476 OV2685_REG_VALUE_08BIT, SC_CTRL_MODE_STANDBY); 477 pm_runtime_put(&ov2685->client->dev); 478 } 479 480 ov2685->streaming = on; 481 482 unlock_and_return: 483 mutex_unlock(&ov2685->mutex); 484 485 return ret; 486 } 487 488 #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API 489 static int ov2685_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) 490 { 491 struct ov2685 *ov2685 = to_ov2685(sd); 492 struct v4l2_mbus_framefmt *try_fmt; 493 494 mutex_lock(&ov2685->mutex); 495 496 try_fmt = v4l2_subdev_get_try_format(sd, fh->state, 0); 497 /* Initialize try_fmt */ 498 ov2685_fill_fmt(&supported_modes[0], try_fmt); 499 500 mutex_unlock(&ov2685->mutex); 501 502 return 0; 503 } 504 #endif 505 506 static int __maybe_unused ov2685_runtime_resume(struct device *dev) 507 { 508 struct v4l2_subdev *sd = dev_get_drvdata(dev); 509 struct ov2685 *ov2685 = to_ov2685(sd); 510 511 return __ov2685_power_on(ov2685); 512 } 513 514 static int __maybe_unused ov2685_runtime_suspend(struct device *dev) 515 { 516 struct v4l2_subdev *sd = dev_get_drvdata(dev); 517 struct ov2685 *ov2685 = to_ov2685(sd); 518 519 __ov2685_power_off(ov2685); 520 521 return 0; 522 } 523 524 static const struct dev_pm_ops ov2685_pm_ops = { 525 SET_RUNTIME_PM_OPS(ov2685_runtime_suspend, 526 ov2685_runtime_resume, NULL) 527 }; 528 529 static int ov2685_set_ctrl(struct v4l2_ctrl *ctrl) 530 { 531 struct ov2685 *ov2685 = container_of(ctrl->handler, 532 struct ov2685, ctrl_handler); 533 struct i2c_client *client = ov2685->client; 534 s64 max_expo; 535 int ret; 536 537 /* Propagate change of current control to all related controls */ 538 switch (ctrl->id) { 539 case V4L2_CID_VBLANK: 540 /* Update max exposure while meeting expected vblanking */ 541 max_expo = ov2685->cur_mode->height + ctrl->val - 4; 542 __v4l2_ctrl_modify_range(ov2685->exposure, 543 ov2685->exposure->minimum, max_expo, 544 ov2685->exposure->step, 545 ov2685->exposure->default_value); 546 break; 547 } 548 549 if (!pm_runtime_get_if_in_use(&client->dev)) 550 return 0; 551 552 switch (ctrl->id) { 553 case V4L2_CID_EXPOSURE: 554 ret = ov2685_write_reg(ov2685->client, OV2685_REG_EXPOSURE, 555 OV2685_REG_VALUE_24BIT, ctrl->val << 4); 556 break; 557 case V4L2_CID_ANALOGUE_GAIN: 558 ret = ov2685_write_reg(ov2685->client, OV2685_REG_GAIN, 559 OV2685_REG_VALUE_16BIT, ctrl->val); 560 break; 561 case V4L2_CID_VBLANK: 562 ret = ov2685_write_reg(ov2685->client, OV2685_REG_VTS, 563 OV2685_REG_VALUE_16BIT, 564 ctrl->val + ov2685->cur_mode->height); 565 break; 566 case V4L2_CID_TEST_PATTERN: 567 ret = ov2685_write_reg(ov2685->client, OV2685_REG_TEST_PATTERN, 568 OV2685_REG_VALUE_08BIT, 569 ov2685_test_pattern_val[ctrl->val]); 570 break; 571 default: 572 dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n", 573 __func__, ctrl->id, ctrl->val); 574 ret = -EINVAL; 575 break; 576 } 577 578 pm_runtime_put(&client->dev); 579 580 return ret; 581 } 582 583 static const struct v4l2_subdev_video_ops ov2685_video_ops = { 584 .s_stream = ov2685_s_stream, 585 }; 586 587 static const struct v4l2_subdev_pad_ops ov2685_pad_ops = { 588 .enum_mbus_code = ov2685_enum_mbus_code, 589 .enum_frame_size = ov2685_enum_frame_sizes, 590 .get_fmt = ov2685_get_fmt, 591 .set_fmt = ov2685_set_fmt, 592 }; 593 594 static const struct v4l2_subdev_ops ov2685_subdev_ops = { 595 .video = &ov2685_video_ops, 596 .pad = &ov2685_pad_ops, 597 }; 598 599 #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API 600 static const struct v4l2_subdev_internal_ops ov2685_internal_ops = { 601 .open = ov2685_open, 602 }; 603 #endif 604 605 static const struct v4l2_ctrl_ops ov2685_ctrl_ops = { 606 .s_ctrl = ov2685_set_ctrl, 607 }; 608 609 static int ov2685_initialize_controls(struct ov2685 *ov2685) 610 { 611 const struct ov2685_mode *mode; 612 struct v4l2_ctrl_handler *handler; 613 struct v4l2_ctrl *ctrl; 614 u64 exposure_max; 615 u32 pixel_rate, h_blank; 616 int ret; 617 618 handler = &ov2685->ctrl_handler; 619 mode = ov2685->cur_mode; 620 ret = v4l2_ctrl_handler_init(handler, 8); 621 if (ret) 622 return ret; 623 handler->lock = &ov2685->mutex; 624 625 ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ, 626 0, 0, link_freq_menu_items); 627 if (ctrl) 628 ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; 629 630 pixel_rate = (link_freq_menu_items[0] * 2 * OV2685_LANES) / 631 OV2685_BITS_PER_SAMPLE; 632 v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE, 633 0, pixel_rate, 1, pixel_rate); 634 635 h_blank = mode->hts_def - mode->width; 636 ov2685->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK, 637 h_blank, h_blank, 1, h_blank); 638 if (ov2685->hblank) 639 ov2685->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY; 640 641 ov2685->vblank = v4l2_ctrl_new_std(handler, &ov2685_ctrl_ops, 642 V4L2_CID_VBLANK, mode->vts_def - mode->height, 643 OV2685_VTS_MAX - mode->height, 1, 644 mode->vts_def - mode->height); 645 646 exposure_max = mode->vts_def - 4; 647 ov2685->exposure = v4l2_ctrl_new_std(handler, &ov2685_ctrl_ops, 648 V4L2_CID_EXPOSURE, OV2685_EXPOSURE_MIN, 649 exposure_max, OV2685_EXPOSURE_STEP, 650 mode->exp_def); 651 652 ov2685->anal_gain = v4l2_ctrl_new_std(handler, &ov2685_ctrl_ops, 653 V4L2_CID_ANALOGUE_GAIN, OV2685_GAIN_MIN, 654 OV2685_GAIN_MAX, OV2685_GAIN_STEP, 655 OV2685_GAIN_DEFAULT); 656 657 ov2685->test_pattern = v4l2_ctrl_new_std_menu_items(handler, 658 &ov2685_ctrl_ops, V4L2_CID_TEST_PATTERN, 659 ARRAY_SIZE(ov2685_test_pattern_menu) - 1, 660 0, 0, ov2685_test_pattern_menu); 661 662 if (handler->error) { 663 ret = handler->error; 664 dev_err(&ov2685->client->dev, 665 "Failed to init controls(%d)\n", ret); 666 goto err_free_handler; 667 } 668 669 ov2685->subdev.ctrl_handler = handler; 670 671 return 0; 672 673 err_free_handler: 674 v4l2_ctrl_handler_free(handler); 675 676 return ret; 677 } 678 679 static int ov2685_check_sensor_id(struct ov2685 *ov2685, 680 struct i2c_client *client) 681 { 682 struct device *dev = &ov2685->client->dev; 683 int ret; 684 u32 id = 0; 685 686 ret = ov2685_read_reg(client, OV2685_REG_CHIP_ID, 687 OV2685_REG_VALUE_16BIT, &id); 688 if (id != CHIP_ID) { 689 dev_err(dev, "Unexpected sensor id(%04x), ret(%d)\n", id, ret); 690 return ret; 691 } 692 693 dev_info(dev, "Detected OV%04x sensor\n", CHIP_ID); 694 695 return 0; 696 } 697 698 static int ov2685_configure_regulators(struct ov2685 *ov2685) 699 { 700 int i; 701 702 for (i = 0; i < OV2685_NUM_SUPPLIES; i++) 703 ov2685->supplies[i].supply = ov2685_supply_names[i]; 704 705 return devm_regulator_bulk_get(&ov2685->client->dev, 706 OV2685_NUM_SUPPLIES, 707 ov2685->supplies); 708 } 709 710 static int ov2685_probe(struct i2c_client *client) 711 { 712 struct device *dev = &client->dev; 713 struct ov2685 *ov2685; 714 int ret; 715 716 ov2685 = devm_kzalloc(dev, sizeof(*ov2685), GFP_KERNEL); 717 if (!ov2685) 718 return -ENOMEM; 719 720 ov2685->client = client; 721 ov2685->cur_mode = &supported_modes[0]; 722 723 ov2685->xvclk = devm_clk_get(dev, "xvclk"); 724 if (IS_ERR(ov2685->xvclk)) { 725 dev_err(dev, "Failed to get xvclk\n"); 726 return -EINVAL; 727 } 728 ret = clk_set_rate(ov2685->xvclk, OV2685_XVCLK_FREQ); 729 if (ret < 0) { 730 dev_err(dev, "Failed to set xvclk rate (24MHz)\n"); 731 return ret; 732 } 733 if (clk_get_rate(ov2685->xvclk) != OV2685_XVCLK_FREQ) 734 dev_warn(dev, "xvclk mismatched, modes are based on 24MHz\n"); 735 736 ov2685->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); 737 if (IS_ERR(ov2685->reset_gpio)) { 738 dev_err(dev, "Failed to get reset-gpios\n"); 739 return -EINVAL; 740 } 741 742 ret = ov2685_configure_regulators(ov2685); 743 if (ret) { 744 dev_err(dev, "Failed to get power regulators\n"); 745 return ret; 746 } 747 748 mutex_init(&ov2685->mutex); 749 v4l2_i2c_subdev_init(&ov2685->subdev, client, &ov2685_subdev_ops); 750 ret = ov2685_initialize_controls(ov2685); 751 if (ret) 752 goto err_destroy_mutex; 753 754 ret = __ov2685_power_on(ov2685); 755 if (ret) 756 goto err_free_handler; 757 758 ret = ov2685_check_sensor_id(ov2685, client); 759 if (ret) 760 goto err_power_off; 761 762 #ifdef CONFIG_VIDEO_V4L2_SUBDEV_API 763 ov2685->subdev.internal_ops = &ov2685_internal_ops; 764 ov2685->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 765 #endif 766 #if defined(CONFIG_MEDIA_CONTROLLER) 767 ov2685->pad.flags = MEDIA_PAD_FL_SOURCE; 768 ov2685->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; 769 ret = media_entity_pads_init(&ov2685->subdev.entity, 1, &ov2685->pad); 770 if (ret < 0) 771 goto err_power_off; 772 #endif 773 774 ret = v4l2_async_register_subdev(&ov2685->subdev); 775 if (ret) { 776 dev_err(dev, "v4l2 async register subdev failed\n"); 777 goto err_clean_entity; 778 } 779 780 pm_runtime_set_active(dev); 781 pm_runtime_enable(dev); 782 pm_runtime_idle(dev); 783 784 return 0; 785 786 err_clean_entity: 787 #if defined(CONFIG_MEDIA_CONTROLLER) 788 media_entity_cleanup(&ov2685->subdev.entity); 789 #endif 790 err_power_off: 791 __ov2685_power_off(ov2685); 792 err_free_handler: 793 v4l2_ctrl_handler_free(&ov2685->ctrl_handler); 794 err_destroy_mutex: 795 mutex_destroy(&ov2685->mutex); 796 797 return ret; 798 } 799 800 static void ov2685_remove(struct i2c_client *client) 801 { 802 struct v4l2_subdev *sd = i2c_get_clientdata(client); 803 struct ov2685 *ov2685 = to_ov2685(sd); 804 805 v4l2_async_unregister_subdev(sd); 806 #if defined(CONFIG_MEDIA_CONTROLLER) 807 media_entity_cleanup(&sd->entity); 808 #endif 809 v4l2_ctrl_handler_free(&ov2685->ctrl_handler); 810 mutex_destroy(&ov2685->mutex); 811 812 pm_runtime_disable(&client->dev); 813 if (!pm_runtime_status_suspended(&client->dev)) 814 __ov2685_power_off(ov2685); 815 pm_runtime_set_suspended(&client->dev); 816 } 817 818 #if IS_ENABLED(CONFIG_OF) 819 static const struct of_device_id ov2685_of_match[] = { 820 { .compatible = "ovti,ov2685" }, 821 {}, 822 }; 823 MODULE_DEVICE_TABLE(of, ov2685_of_match); 824 #endif 825 826 static struct i2c_driver ov2685_i2c_driver = { 827 .driver = { 828 .name = "ov2685", 829 .pm = &ov2685_pm_ops, 830 .of_match_table = of_match_ptr(ov2685_of_match), 831 }, 832 .probe_new = &ov2685_probe, 833 .remove = &ov2685_remove, 834 }; 835 836 module_i2c_driver(ov2685_i2c_driver); 837 838 MODULE_DESCRIPTION("OmniVision ov2685 sensor driver"); 839 MODULE_LICENSE("GPL v2"); 840