1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * mt9t112 Camera Driver 4 * 5 * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> 6 * 7 * Copyright (C) 2009 Renesas Solutions Corp. 8 * Kuninori Morimoto <morimoto.kuninori@renesas.com> 9 * 10 * Based on ov772x driver, mt9m111 driver, 11 * 12 * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com> 13 * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr> 14 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> 15 * Copyright (C) 2008 Magnus Damm 16 * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> 17 * 18 * TODO: This driver lacks support for frame rate control due to missing 19 * register level documentation and suitable hardware for testing. 20 * v4l-utils compliance tools will report errors. 21 */ 22 23 #include <linux/clk.h> 24 #include <linux/delay.h> 25 #include <linux/gpio/consumer.h> 26 #include <linux/i2c.h> 27 #include <linux/init.h> 28 #include <linux/module.h> 29 #include <linux/slab.h> 30 #include <linux/v4l2-mediabus.h> 31 #include <linux/videodev2.h> 32 33 #include <media/i2c/mt9t112.h> 34 #include <media/v4l2-common.h> 35 #include <media/v4l2-image-sizes.h> 36 #include <media/v4l2-subdev.h> 37 38 /* you can check PLL/clock info */ 39 /* #define EXT_CLOCK 24000000 */ 40 41 /************************************************************************ 42 * macro 43 ***********************************************************************/ 44 /* 45 * frame size 46 */ 47 #define MAX_WIDTH 2048 48 #define MAX_HEIGHT 1536 49 50 /* 51 * macro of read/write 52 */ 53 #define ECHECKER(ret, x) \ 54 do { \ 55 (ret) = (x); \ 56 if ((ret) < 0) \ 57 return (ret); \ 58 } while (0) 59 60 #define mt9t112_reg_write(ret, client, a, b) \ 61 ECHECKER(ret, __mt9t112_reg_write(client, a, b)) 62 #define mt9t112_mcu_write(ret, client, a, b) \ 63 ECHECKER(ret, __mt9t112_mcu_write(client, a, b)) 64 65 #define mt9t112_reg_mask_set(ret, client, a, b, c) \ 66 ECHECKER(ret, __mt9t112_reg_mask_set(client, a, b, c)) 67 #define mt9t112_mcu_mask_set(ret, client, a, b, c) \ 68 ECHECKER(ret, __mt9t112_mcu_mask_set(client, a, b, c)) 69 70 #define mt9t112_reg_read(ret, client, a) \ 71 ECHECKER(ret, __mt9t112_reg_read(client, a)) 72 73 /* 74 * Logical address 75 */ 76 #define _VAR(id, offset, base) (base | (id & 0x1f) << 10 | (offset & 0x3ff)) 77 #define VAR(id, offset) _VAR(id, offset, 0x0000) 78 #define VAR8(id, offset) _VAR(id, offset, 0x8000) 79 80 /************************************************************************ 81 * struct 82 ***********************************************************************/ 83 struct mt9t112_format { 84 u32 code; 85 enum v4l2_colorspace colorspace; 86 u16 fmt; 87 u16 order; 88 }; 89 90 struct mt9t112_priv { 91 struct v4l2_subdev subdev; 92 struct mt9t112_platform_data *info; 93 struct i2c_client *client; 94 struct v4l2_rect frame; 95 struct clk *clk; 96 struct gpio_desc *standby_gpio; 97 const struct mt9t112_format *format; 98 int num_formats; 99 bool init_done; 100 }; 101 102 /************************************************************************ 103 * supported format 104 ***********************************************************************/ 105 106 static const struct mt9t112_format mt9t112_cfmts[] = { 107 { 108 .code = MEDIA_BUS_FMT_UYVY8_2X8, 109 .colorspace = V4L2_COLORSPACE_SRGB, 110 .fmt = 1, 111 .order = 0, 112 }, { 113 .code = MEDIA_BUS_FMT_VYUY8_2X8, 114 .colorspace = V4L2_COLORSPACE_SRGB, 115 .fmt = 1, 116 .order = 1, 117 }, { 118 .code = MEDIA_BUS_FMT_YUYV8_2X8, 119 .colorspace = V4L2_COLORSPACE_SRGB, 120 .fmt = 1, 121 .order = 2, 122 }, { 123 .code = MEDIA_BUS_FMT_YVYU8_2X8, 124 .colorspace = V4L2_COLORSPACE_SRGB, 125 .fmt = 1, 126 .order = 3, 127 }, { 128 .code = MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE, 129 .colorspace = V4L2_COLORSPACE_SRGB, 130 .fmt = 8, 131 .order = 2, 132 }, { 133 .code = MEDIA_BUS_FMT_RGB565_2X8_LE, 134 .colorspace = V4L2_COLORSPACE_SRGB, 135 .fmt = 4, 136 .order = 2, 137 }, 138 }; 139 140 /************************************************************************ 141 * general function 142 ***********************************************************************/ 143 static struct mt9t112_priv *to_mt9t112(const struct i2c_client *client) 144 { 145 return container_of(i2c_get_clientdata(client), 146 struct mt9t112_priv, 147 subdev); 148 } 149 150 static int __mt9t112_reg_read(const struct i2c_client *client, u16 command) 151 { 152 struct i2c_msg msg[2]; 153 u8 buf[2]; 154 int ret; 155 156 command = swab16(command); 157 158 msg[0].addr = client->addr; 159 msg[0].flags = 0; 160 msg[0].len = 2; 161 msg[0].buf = (u8 *)&command; 162 163 msg[1].addr = client->addr; 164 msg[1].flags = I2C_M_RD; 165 msg[1].len = 2; 166 msg[1].buf = buf; 167 168 /* 169 * If return value of this function is < 0, it means error, else, 170 * below 16bit is valid data. 171 */ 172 ret = i2c_transfer(client->adapter, msg, 2); 173 if (ret < 0) 174 return ret; 175 176 memcpy(&ret, buf, 2); 177 178 return swab16(ret); 179 } 180 181 static int __mt9t112_reg_write(const struct i2c_client *client, 182 u16 command, u16 data) 183 { 184 struct i2c_msg msg; 185 u8 buf[4]; 186 int ret; 187 188 command = swab16(command); 189 data = swab16(data); 190 191 memcpy(buf + 0, &command, 2); 192 memcpy(buf + 2, &data, 2); 193 194 msg.addr = client->addr; 195 msg.flags = 0; 196 msg.len = 4; 197 msg.buf = buf; 198 199 /* 200 * i2c_transfer return message length, but this function should 201 * return 0 if correct case. 202 */ 203 ret = i2c_transfer(client->adapter, &msg, 1); 204 205 return ret >= 0 ? 0 : ret; 206 } 207 208 static int __mt9t112_reg_mask_set(const struct i2c_client *client, 209 u16 command, u16 mask, u16 set) 210 { 211 int val = __mt9t112_reg_read(client, command); 212 213 if (val < 0) 214 return val; 215 216 val &= ~mask; 217 val |= set & mask; 218 219 return __mt9t112_reg_write(client, command, val); 220 } 221 222 /* mcu access */ 223 static int __mt9t112_mcu_read(const struct i2c_client *client, u16 command) 224 { 225 int ret; 226 227 ret = __mt9t112_reg_write(client, 0x098E, command); 228 if (ret < 0) 229 return ret; 230 231 return __mt9t112_reg_read(client, 0x0990); 232 } 233 234 static int __mt9t112_mcu_write(const struct i2c_client *client, 235 u16 command, u16 data) 236 { 237 int ret; 238 239 ret = __mt9t112_reg_write(client, 0x098E, command); 240 if (ret < 0) 241 return ret; 242 243 return __mt9t112_reg_write(client, 0x0990, data); 244 } 245 246 static int __mt9t112_mcu_mask_set(const struct i2c_client *client, 247 u16 command, u16 mask, u16 set) 248 { 249 int val = __mt9t112_mcu_read(client, command); 250 251 if (val < 0) 252 return val; 253 254 val &= ~mask; 255 val |= set & mask; 256 257 return __mt9t112_mcu_write(client, command, val); 258 } 259 260 static int mt9t112_reset(const struct i2c_client *client) 261 { 262 int ret; 263 264 mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0001); 265 usleep_range(1000, 5000); 266 mt9t112_reg_mask_set(ret, client, 0x001a, 0x0001, 0x0000); 267 268 return ret; 269 } 270 271 #ifndef EXT_CLOCK 272 #define CLOCK_INFO(a, b) 273 #else 274 #define CLOCK_INFO(a, b) mt9t112_clock_info(a, b) 275 static int mt9t112_clock_info(const struct i2c_client *client, u32 ext) 276 { 277 int m, n, p1, p2, p3, p4, p5, p6, p7; 278 u32 vco, clk; 279 char *enable; 280 281 ext /= 1000; /* kbyte order */ 282 283 mt9t112_reg_read(n, client, 0x0012); 284 p1 = n & 0x000f; 285 n = n >> 4; 286 p2 = n & 0x000f; 287 n = n >> 4; 288 p3 = n & 0x000f; 289 290 mt9t112_reg_read(n, client, 0x002a); 291 p4 = n & 0x000f; 292 n = n >> 4; 293 p5 = n & 0x000f; 294 n = n >> 4; 295 p6 = n & 0x000f; 296 297 mt9t112_reg_read(n, client, 0x002c); 298 p7 = n & 0x000f; 299 300 mt9t112_reg_read(n, client, 0x0010); 301 m = n & 0x00ff; 302 n = (n >> 8) & 0x003f; 303 304 enable = ((ext < 6000) || (ext > 54000)) ? "X" : ""; 305 dev_dbg(&client->dev, "EXTCLK : %10u K %s\n", ext, enable); 306 307 vco = 2 * m * ext / (n + 1); 308 enable = ((vco < 384000) || (vco > 768000)) ? "X" : ""; 309 dev_dbg(&client->dev, "VCO : %10u K %s\n", vco, enable); 310 311 clk = vco / (p1 + 1) / (p2 + 1); 312 enable = (clk > 96000) ? "X" : ""; 313 dev_dbg(&client->dev, "PIXCLK : %10u K %s\n", clk, enable); 314 315 clk = vco / (p3 + 1); 316 enable = (clk > 768000) ? "X" : ""; 317 dev_dbg(&client->dev, "MIPICLK : %10u K %s\n", clk, enable); 318 319 clk = vco / (p6 + 1); 320 enable = (clk > 96000) ? "X" : ""; 321 dev_dbg(&client->dev, "MCU CLK : %10u K %s\n", clk, enable); 322 323 clk = vco / (p5 + 1); 324 enable = (clk > 54000) ? "X" : ""; 325 dev_dbg(&client->dev, "SOC CLK : %10u K %s\n", clk, enable); 326 327 clk = vco / (p4 + 1); 328 enable = (clk > 70000) ? "X" : ""; 329 dev_dbg(&client->dev, "Sensor CLK : %10u K %s\n", clk, enable); 330 331 clk = vco / (p7 + 1); 332 dev_dbg(&client->dev, "External sensor : %10u K\n", clk); 333 334 clk = ext / (n + 1); 335 enable = ((clk < 2000) || (clk > 24000)) ? "X" : ""; 336 dev_dbg(&client->dev, "PFD : %10u K %s\n", clk, enable); 337 338 return 0; 339 } 340 #endif 341 342 static int mt9t112_set_a_frame_size(const struct i2c_client *client, 343 u16 width, u16 height) 344 { 345 int ret; 346 u16 wstart = (MAX_WIDTH - width) / 2; 347 u16 hstart = (MAX_HEIGHT - height) / 2; 348 349 /* (Context A) Image Width/Height. */ 350 mt9t112_mcu_write(ret, client, VAR(26, 0), width); 351 mt9t112_mcu_write(ret, client, VAR(26, 2), height); 352 353 /* (Context A) Output Width/Height. */ 354 mt9t112_mcu_write(ret, client, VAR(18, 43), 8 + width); 355 mt9t112_mcu_write(ret, client, VAR(18, 45), 8 + height); 356 357 /* (Context A) Start Row/Column. */ 358 mt9t112_mcu_write(ret, client, VAR(18, 2), 4 + hstart); 359 mt9t112_mcu_write(ret, client, VAR(18, 4), 4 + wstart); 360 361 /* (Context A) End Row/Column. */ 362 mt9t112_mcu_write(ret, client, VAR(18, 6), 11 + height + hstart); 363 mt9t112_mcu_write(ret, client, VAR(18, 8), 11 + width + wstart); 364 365 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); 366 367 return ret; 368 } 369 370 static int mt9t112_set_pll_dividers(const struct i2c_client *client, 371 u8 m, u8 n, u8 p1, u8 p2, u8 p3, u8 p4, 372 u8 p5, u8 p6, u8 p7) 373 { 374 int ret; 375 u16 val; 376 377 /* N/M */ 378 val = (n << 8) | (m << 0); 379 mt9t112_reg_mask_set(ret, client, 0x0010, 0x3fff, val); 380 381 /* P1/P2/P3 */ 382 val = ((p3 & 0x0F) << 8) | ((p2 & 0x0F) << 4) | ((p1 & 0x0F) << 0); 383 mt9t112_reg_mask_set(ret, client, 0x0012, 0x0fff, val); 384 385 /* P4/P5/P6 */ 386 val = (0x7 << 12) | ((p6 & 0x0F) << 8) | ((p5 & 0x0F) << 4) | 387 ((p4 & 0x0F) << 0); 388 mt9t112_reg_mask_set(ret, client, 0x002A, 0x7fff, val); 389 390 /* P7 */ 391 val = (0x1 << 12) | ((p7 & 0x0F) << 0); 392 mt9t112_reg_mask_set(ret, client, 0x002C, 0x100f, val); 393 394 return ret; 395 } 396 397 static int mt9t112_init_pll(const struct i2c_client *client) 398 { 399 struct mt9t112_priv *priv = to_mt9t112(client); 400 int data, i, ret; 401 402 mt9t112_reg_mask_set(ret, client, 0x0014, 0x003, 0x0001); 403 404 /* PLL control: BYPASS PLL = 8517. */ 405 mt9t112_reg_write(ret, client, 0x0014, 0x2145); 406 407 /* Replace these registers when new timing parameters are generated. */ 408 mt9t112_set_pll_dividers(client, 409 priv->info->divider.m, priv->info->divider.n, 410 priv->info->divider.p1, priv->info->divider.p2, 411 priv->info->divider.p3, priv->info->divider.p4, 412 priv->info->divider.p5, priv->info->divider.p6, 413 priv->info->divider.p7); 414 415 /* 416 * TEST_BYPASS on 417 * PLL_ENABLE on 418 * SEL_LOCK_DET on 419 * TEST_BYPASS off 420 */ 421 mt9t112_reg_write(ret, client, 0x0014, 0x2525); 422 mt9t112_reg_write(ret, client, 0x0014, 0x2527); 423 mt9t112_reg_write(ret, client, 0x0014, 0x3427); 424 mt9t112_reg_write(ret, client, 0x0014, 0x3027); 425 426 mdelay(10); 427 428 /* 429 * PLL_BYPASS off 430 * Reference clock count 431 * I2C Master Clock Divider 432 */ 433 mt9t112_reg_write(ret, client, 0x0014, 0x3046); 434 /* JPEG initialization workaround */ 435 mt9t112_reg_write(ret, client, 0x0016, 0x0400); 436 mt9t112_reg_write(ret, client, 0x0022, 0x0190); 437 mt9t112_reg_write(ret, client, 0x3B84, 0x0212); 438 439 /* External sensor clock is PLL bypass. */ 440 mt9t112_reg_write(ret, client, 0x002E, 0x0500); 441 442 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0002, 0x0002); 443 mt9t112_reg_mask_set(ret, client, 0x3B82, 0x0004, 0x0004); 444 445 /* MCU disabled. */ 446 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0x0004); 447 448 /* Out of standby. */ 449 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0001, 0); 450 451 mdelay(50); 452 453 /* 454 * Standby Workaround 455 * Disable Secondary I2C Pads 456 */ 457 mt9t112_reg_write(ret, client, 0x0614, 0x0001); 458 mdelay(1); 459 mt9t112_reg_write(ret, client, 0x0614, 0x0001); 460 mdelay(1); 461 mt9t112_reg_write(ret, client, 0x0614, 0x0001); 462 mdelay(1); 463 mt9t112_reg_write(ret, client, 0x0614, 0x0001); 464 mdelay(1); 465 mt9t112_reg_write(ret, client, 0x0614, 0x0001); 466 mdelay(1); 467 mt9t112_reg_write(ret, client, 0x0614, 0x0001); 468 mdelay(1); 469 470 /* Poll to verify out of standby. Must Poll this bit. */ 471 for (i = 0; i < 100; i++) { 472 mt9t112_reg_read(data, client, 0x0018); 473 if (!(data & 0x4000)) 474 break; 475 476 mdelay(10); 477 } 478 479 return ret; 480 } 481 482 static int mt9t112_init_setting(const struct i2c_client *client) 483 { 484 int ret; 485 486 /* Adaptive Output Clock (A) */ 487 mt9t112_mcu_mask_set(ret, client, VAR(26, 160), 0x0040, 0x0000); 488 489 /* Read Mode (A) */ 490 mt9t112_mcu_write(ret, client, VAR(18, 12), 0x0024); 491 492 /* Fine Correction (A) */ 493 mt9t112_mcu_write(ret, client, VAR(18, 15), 0x00CC); 494 495 /* Fine IT Min (A) */ 496 mt9t112_mcu_write(ret, client, VAR(18, 17), 0x01f1); 497 498 /* Fine IT Max Margin (A) */ 499 mt9t112_mcu_write(ret, client, VAR(18, 19), 0x00fF); 500 501 /* Base Frame Lines (A) */ 502 mt9t112_mcu_write(ret, client, VAR(18, 29), 0x032D); 503 504 /* Min Line Length (A) */ 505 mt9t112_mcu_write(ret, client, VAR(18, 31), 0x073a); 506 507 /* Line Length (A) */ 508 mt9t112_mcu_write(ret, client, VAR(18, 37), 0x07d0); 509 510 /* Adaptive Output Clock (B) */ 511 mt9t112_mcu_mask_set(ret, client, VAR(27, 160), 0x0040, 0x0000); 512 513 /* Row Start (B) */ 514 mt9t112_mcu_write(ret, client, VAR(18, 74), 0x004); 515 516 /* Column Start (B) */ 517 mt9t112_mcu_write(ret, client, VAR(18, 76), 0x004); 518 519 /* Row End (B) */ 520 mt9t112_mcu_write(ret, client, VAR(18, 78), 0x60B); 521 522 /* Column End (B) */ 523 mt9t112_mcu_write(ret, client, VAR(18, 80), 0x80B); 524 525 /* Fine Correction (B) */ 526 mt9t112_mcu_write(ret, client, VAR(18, 87), 0x008C); 527 528 /* Fine IT Min (B) */ 529 mt9t112_mcu_write(ret, client, VAR(18, 89), 0x01F1); 530 531 /* Fine IT Max Margin (B) */ 532 mt9t112_mcu_write(ret, client, VAR(18, 91), 0x00FF); 533 534 /* Base Frame Lines (B) */ 535 mt9t112_mcu_write(ret, client, VAR(18, 101), 0x0668); 536 537 /* Min Line Length (B) */ 538 mt9t112_mcu_write(ret, client, VAR(18, 103), 0x0AF0); 539 540 /* Line Length (B) */ 541 mt9t112_mcu_write(ret, client, VAR(18, 109), 0x0AF0); 542 543 /* 544 * Flicker Detection registers. 545 * This section should be replaced whenever new timing file is 546 * generated. All the following registers need to be replaced. 547 * Following registers are generated from Register Wizard but user can 548 * modify them. For detail see auto flicker detection tuning. 549 */ 550 551 /* FD_FDPERIOD_SELECT */ 552 mt9t112_mcu_write(ret, client, VAR8(8, 5), 0x01); 553 554 /* PRI_B_CONFIG_FD_ALGO_RUN */ 555 mt9t112_mcu_write(ret, client, VAR(27, 17), 0x0003); 556 557 /* PRI_A_CONFIG_FD_ALGO_RUN */ 558 mt9t112_mcu_write(ret, client, VAR(26, 17), 0x0003); 559 560 /* 561 * AFD range detection tuning registers. 562 */ 563 564 /* Search_f1_50 */ 565 mt9t112_mcu_write(ret, client, VAR8(18, 165), 0x25); 566 567 /* Search_f2_50 */ 568 mt9t112_mcu_write(ret, client, VAR8(18, 166), 0x28); 569 570 /* Search_f1_60 */ 571 mt9t112_mcu_write(ret, client, VAR8(18, 167), 0x2C); 572 573 /* Search_f2_60 */ 574 mt9t112_mcu_write(ret, client, VAR8(18, 168), 0x2F); 575 576 /* Period_50Hz (A) */ 577 mt9t112_mcu_write(ret, client, VAR8(18, 68), 0xBA); 578 579 /* Secret register by Aptina. */ 580 /* Period_50Hz (A MSB) */ 581 mt9t112_mcu_write(ret, client, VAR8(18, 303), 0x00); 582 583 /* Period_60Hz (A) */ 584 mt9t112_mcu_write(ret, client, VAR8(18, 69), 0x9B); 585 586 /* Secret register by Aptina. */ 587 /* Period_60Hz (A MSB) */ 588 mt9t112_mcu_write(ret, client, VAR8(18, 301), 0x00); 589 590 /* Period_50Hz (B) */ 591 mt9t112_mcu_write(ret, client, VAR8(18, 140), 0x82); 592 593 /* Secret register by Aptina. */ 594 /* Period_50Hz (B) MSB */ 595 mt9t112_mcu_write(ret, client, VAR8(18, 304), 0x00); 596 597 /* Period_60Hz (B) */ 598 mt9t112_mcu_write(ret, client, VAR8(18, 141), 0x6D); 599 600 /* Secret register by Aptina. */ 601 /* Period_60Hz (B) MSB */ 602 mt9t112_mcu_write(ret, client, VAR8(18, 302), 0x00); 603 604 /* FD Mode */ 605 mt9t112_mcu_write(ret, client, VAR8(8, 2), 0x10); 606 607 /* Stat_min */ 608 mt9t112_mcu_write(ret, client, VAR8(8, 9), 0x02); 609 610 /* Stat_max */ 611 mt9t112_mcu_write(ret, client, VAR8(8, 10), 0x03); 612 613 /* Min_amplitude */ 614 mt9t112_mcu_write(ret, client, VAR8(8, 12), 0x0A); 615 616 /* RX FIFO Watermark (A) */ 617 mt9t112_mcu_write(ret, client, VAR(18, 70), 0x0014); 618 619 /* RX FIFO Watermark (B) */ 620 mt9t112_mcu_write(ret, client, VAR(18, 142), 0x0014); 621 622 /* MCLK: 16MHz 623 * PCLK: 73MHz 624 * CorePixCLK: 36.5 MHz 625 */ 626 mt9t112_mcu_write(ret, client, VAR8(18, 0x0044), 133); 627 mt9t112_mcu_write(ret, client, VAR8(18, 0x0045), 110); 628 mt9t112_mcu_write(ret, client, VAR8(18, 0x008c), 130); 629 mt9t112_mcu_write(ret, client, VAR8(18, 0x008d), 108); 630 631 mt9t112_mcu_write(ret, client, VAR8(18, 0x00A5), 27); 632 mt9t112_mcu_write(ret, client, VAR8(18, 0x00a6), 30); 633 mt9t112_mcu_write(ret, client, VAR8(18, 0x00a7), 32); 634 mt9t112_mcu_write(ret, client, VAR8(18, 0x00a8), 35); 635 636 return ret; 637 } 638 639 static int mt9t112_auto_focus_setting(const struct i2c_client *client) 640 { 641 int ret; 642 643 mt9t112_mcu_write(ret, client, VAR(12, 13), 0x000F); 644 mt9t112_mcu_write(ret, client, VAR(12, 23), 0x0F0F); 645 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); 646 647 mt9t112_reg_write(ret, client, 0x0614, 0x0000); 648 649 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); 650 mt9t112_mcu_write(ret, client, VAR8(12, 2), 0x02); 651 mt9t112_mcu_write(ret, client, VAR(12, 3), 0x0002); 652 mt9t112_mcu_write(ret, client, VAR(17, 3), 0x8001); 653 mt9t112_mcu_write(ret, client, VAR(17, 11), 0x0025); 654 mt9t112_mcu_write(ret, client, VAR(17, 13), 0x0193); 655 mt9t112_mcu_write(ret, client, VAR8(17, 33), 0x18); 656 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x05); 657 658 return ret; 659 } 660 661 static int mt9t112_auto_focus_trigger(const struct i2c_client *client) 662 { 663 int ret; 664 665 mt9t112_mcu_write(ret, client, VAR8(12, 25), 0x01); 666 667 return ret; 668 } 669 670 static int mt9t112_init_camera(const struct i2c_client *client) 671 { 672 int ret; 673 674 ECHECKER(ret, mt9t112_reset(client)); 675 ECHECKER(ret, mt9t112_init_pll(client)); 676 ECHECKER(ret, mt9t112_init_setting(client)); 677 ECHECKER(ret, mt9t112_auto_focus_setting(client)); 678 679 mt9t112_reg_mask_set(ret, client, 0x0018, 0x0004, 0); 680 681 /* Analog setting B.*/ 682 mt9t112_reg_write(ret, client, 0x3084, 0x2409); 683 mt9t112_reg_write(ret, client, 0x3092, 0x0A49); 684 mt9t112_reg_write(ret, client, 0x3094, 0x4949); 685 mt9t112_reg_write(ret, client, 0x3096, 0x4950); 686 687 /* 688 * Disable adaptive clock. 689 * PRI_A_CONFIG_JPEG_OB_TX_CONTROL_VAR 690 * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR 691 */ 692 mt9t112_mcu_write(ret, client, VAR(26, 160), 0x0A2E); 693 mt9t112_mcu_write(ret, client, VAR(27, 160), 0x0A2E); 694 695 /* 696 * Configure Status in Status_before_length Format and enable header. 697 * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR 698 */ 699 mt9t112_mcu_write(ret, client, VAR(27, 144), 0x0CB4); 700 701 /* 702 * Enable JPEG in context B. 703 * PRI_B_CONFIG_JPEG_OB_TX_CONTROL_VAR 704 */ 705 mt9t112_mcu_write(ret, client, VAR8(27, 142), 0x01); 706 707 /* Disable Dac_TXLO. */ 708 mt9t112_reg_write(ret, client, 0x316C, 0x350F); 709 710 /* Set max slew rates. */ 711 mt9t112_reg_write(ret, client, 0x1E, 0x777); 712 713 return ret; 714 } 715 716 /************************************************************************ 717 * v4l2_subdev_core_ops 718 ***********************************************************************/ 719 720 #ifdef CONFIG_VIDEO_ADV_DEBUG 721 static int mt9t112_g_register(struct v4l2_subdev *sd, 722 struct v4l2_dbg_register *reg) 723 { 724 struct i2c_client *client = v4l2_get_subdevdata(sd); 725 int ret; 726 727 reg->size = 2; 728 mt9t112_reg_read(ret, client, reg->reg); 729 730 reg->val = (__u64)ret; 731 732 return 0; 733 } 734 735 static int mt9t112_s_register(struct v4l2_subdev *sd, 736 const struct v4l2_dbg_register *reg) 737 { 738 struct i2c_client *client = v4l2_get_subdevdata(sd); 739 int ret; 740 741 mt9t112_reg_write(ret, client, reg->reg, reg->val); 742 743 return ret; 744 } 745 #endif 746 747 static int mt9t112_power_on(struct mt9t112_priv *priv) 748 { 749 int ret; 750 751 ret = clk_prepare_enable(priv->clk); 752 if (ret) 753 return ret; 754 755 if (priv->standby_gpio) { 756 gpiod_set_value(priv->standby_gpio, 0); 757 msleep(100); 758 } 759 760 return 0; 761 } 762 763 static int mt9t112_power_off(struct mt9t112_priv *priv) 764 { 765 clk_disable_unprepare(priv->clk); 766 if (priv->standby_gpio) { 767 gpiod_set_value(priv->standby_gpio, 1); 768 msleep(100); 769 } 770 771 return 0; 772 } 773 774 static int mt9t112_s_power(struct v4l2_subdev *sd, int on) 775 { 776 struct i2c_client *client = v4l2_get_subdevdata(sd); 777 struct mt9t112_priv *priv = to_mt9t112(client); 778 779 return on ? mt9t112_power_on(priv) : 780 mt9t112_power_off(priv); 781 } 782 783 static const struct v4l2_subdev_core_ops mt9t112_subdev_core_ops = { 784 #ifdef CONFIG_VIDEO_ADV_DEBUG 785 .g_register = mt9t112_g_register, 786 .s_register = mt9t112_s_register, 787 #endif 788 .s_power = mt9t112_s_power, 789 }; 790 791 /************************************************************************ 792 * v4l2_subdev_video_ops 793 **********************************************************************/ 794 static int mt9t112_s_stream(struct v4l2_subdev *sd, int enable) 795 { 796 struct i2c_client *client = v4l2_get_subdevdata(sd); 797 struct mt9t112_priv *priv = to_mt9t112(client); 798 int ret = 0; 799 800 if (!enable) { 801 /* FIXME 802 * 803 * If user selected large output size, and used it long time, 804 * mt9t112 camera will be very warm. 805 * 806 * But current driver can not stop mt9t112 camera. 807 * So, set small size here to solve this problem. 808 */ 809 mt9t112_set_a_frame_size(client, VGA_WIDTH, VGA_HEIGHT); 810 return ret; 811 } 812 813 if (!priv->init_done) { 814 u16 param = MT9T112_FLAG_PCLK_RISING_EDGE & priv->info->flags ? 815 0x0001 : 0x0000; 816 817 ECHECKER(ret, mt9t112_init_camera(client)); 818 819 /* Invert PCLK (Data sampled on falling edge of pixclk). */ 820 mt9t112_reg_write(ret, client, 0x3C20, param); 821 822 mdelay(5); 823 824 priv->init_done = true; 825 } 826 827 mt9t112_mcu_write(ret, client, VAR(26, 7), priv->format->fmt); 828 mt9t112_mcu_write(ret, client, VAR(26, 9), priv->format->order); 829 mt9t112_mcu_write(ret, client, VAR8(1, 0), 0x06); 830 831 mt9t112_set_a_frame_size(client, priv->frame.width, priv->frame.height); 832 833 ECHECKER(ret, mt9t112_auto_focus_trigger(client)); 834 835 dev_dbg(&client->dev, "format : %d\n", priv->format->code); 836 dev_dbg(&client->dev, "size : %d x %d\n", 837 priv->frame.width, 838 priv->frame.height); 839 840 CLOCK_INFO(client, EXT_CLOCK); 841 842 return ret; 843 } 844 845 static int mt9t112_set_params(struct mt9t112_priv *priv, 846 const struct v4l2_rect *rect, 847 u32 code) 848 { 849 int i; 850 851 /* 852 * get color format 853 */ 854 for (i = 0; i < priv->num_formats; i++) 855 if (mt9t112_cfmts[i].code == code) 856 break; 857 858 if (i == priv->num_formats) 859 return -EINVAL; 860 861 priv->frame = *rect; 862 863 /* 864 * frame size check 865 */ 866 v4l_bound_align_image(&priv->frame.width, 0, MAX_WIDTH, 0, 867 &priv->frame.height, 0, MAX_HEIGHT, 0, 0); 868 869 priv->format = mt9t112_cfmts + i; 870 871 return 0; 872 } 873 874 static int mt9t112_get_selection(struct v4l2_subdev *sd, 875 struct v4l2_subdev_state *sd_state, 876 struct v4l2_subdev_selection *sel) 877 { 878 struct i2c_client *client = v4l2_get_subdevdata(sd); 879 struct mt9t112_priv *priv = to_mt9t112(client); 880 881 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 882 return -EINVAL; 883 884 switch (sel->target) { 885 case V4L2_SEL_TGT_CROP_BOUNDS: 886 sel->r.left = 0; 887 sel->r.top = 0; 888 sel->r.width = MAX_WIDTH; 889 sel->r.height = MAX_HEIGHT; 890 return 0; 891 case V4L2_SEL_TGT_CROP: 892 sel->r = priv->frame; 893 return 0; 894 default: 895 return -EINVAL; 896 } 897 } 898 899 static int mt9t112_set_selection(struct v4l2_subdev *sd, 900 struct v4l2_subdev_state *sd_state, 901 struct v4l2_subdev_selection *sel) 902 { 903 struct i2c_client *client = v4l2_get_subdevdata(sd); 904 struct mt9t112_priv *priv = to_mt9t112(client); 905 const struct v4l2_rect *rect = &sel->r; 906 907 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || 908 sel->target != V4L2_SEL_TGT_CROP) 909 return -EINVAL; 910 911 return mt9t112_set_params(priv, rect, priv->format->code); 912 } 913 914 static int mt9t112_get_fmt(struct v4l2_subdev *sd, 915 struct v4l2_subdev_state *sd_state, 916 struct v4l2_subdev_format *format) 917 { 918 struct v4l2_mbus_framefmt *mf = &format->format; 919 struct i2c_client *client = v4l2_get_subdevdata(sd); 920 struct mt9t112_priv *priv = to_mt9t112(client); 921 922 if (format->pad) 923 return -EINVAL; 924 925 mf->width = priv->frame.width; 926 mf->height = priv->frame.height; 927 mf->colorspace = priv->format->colorspace; 928 mf->code = priv->format->code; 929 mf->field = V4L2_FIELD_NONE; 930 931 return 0; 932 } 933 934 static int mt9t112_s_fmt(struct v4l2_subdev *sd, 935 struct v4l2_mbus_framefmt *mf) 936 { 937 struct i2c_client *client = v4l2_get_subdevdata(sd); 938 struct mt9t112_priv *priv = to_mt9t112(client); 939 struct v4l2_rect rect = { 940 .width = mf->width, 941 .height = mf->height, 942 .left = priv->frame.left, 943 .top = priv->frame.top, 944 }; 945 int ret; 946 947 ret = mt9t112_set_params(priv, &rect, mf->code); 948 949 if (!ret) 950 mf->colorspace = priv->format->colorspace; 951 952 return ret; 953 } 954 955 static int mt9t112_set_fmt(struct v4l2_subdev *sd, 956 struct v4l2_subdev_state *sd_state, 957 struct v4l2_subdev_format *format) 958 { 959 struct i2c_client *client = v4l2_get_subdevdata(sd); 960 struct v4l2_mbus_framefmt *mf = &format->format; 961 struct mt9t112_priv *priv = to_mt9t112(client); 962 int i; 963 964 if (format->pad) 965 return -EINVAL; 966 967 for (i = 0; i < priv->num_formats; i++) 968 if (mt9t112_cfmts[i].code == mf->code) 969 break; 970 971 if (i == priv->num_formats) { 972 mf->code = MEDIA_BUS_FMT_UYVY8_2X8; 973 mf->colorspace = V4L2_COLORSPACE_JPEG; 974 } else { 975 mf->colorspace = mt9t112_cfmts[i].colorspace; 976 } 977 978 v4l_bound_align_image(&mf->width, 0, MAX_WIDTH, 0, 979 &mf->height, 0, MAX_HEIGHT, 0, 0); 980 981 mf->field = V4L2_FIELD_NONE; 982 983 if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) 984 return mt9t112_s_fmt(sd, mf); 985 sd_state->pads->try_fmt = *mf; 986 987 return 0; 988 } 989 990 static int mt9t112_enum_mbus_code(struct v4l2_subdev *sd, 991 struct v4l2_subdev_state *sd_state, 992 struct v4l2_subdev_mbus_code_enum *code) 993 { 994 struct i2c_client *client = v4l2_get_subdevdata(sd); 995 struct mt9t112_priv *priv = to_mt9t112(client); 996 997 if (code->pad || code->index >= priv->num_formats) 998 return -EINVAL; 999 1000 code->code = mt9t112_cfmts[code->index].code; 1001 1002 return 0; 1003 } 1004 1005 static const struct v4l2_subdev_video_ops mt9t112_subdev_video_ops = { 1006 .s_stream = mt9t112_s_stream, 1007 }; 1008 1009 static const struct v4l2_subdev_pad_ops mt9t112_subdev_pad_ops = { 1010 .enum_mbus_code = mt9t112_enum_mbus_code, 1011 .get_selection = mt9t112_get_selection, 1012 .set_selection = mt9t112_set_selection, 1013 .get_fmt = mt9t112_get_fmt, 1014 .set_fmt = mt9t112_set_fmt, 1015 }; 1016 1017 /************************************************************************ 1018 * i2c driver 1019 ***********************************************************************/ 1020 static const struct v4l2_subdev_ops mt9t112_subdev_ops = { 1021 .core = &mt9t112_subdev_core_ops, 1022 .video = &mt9t112_subdev_video_ops, 1023 .pad = &mt9t112_subdev_pad_ops, 1024 }; 1025 1026 static int mt9t112_camera_probe(struct i2c_client *client) 1027 { 1028 struct mt9t112_priv *priv = to_mt9t112(client); 1029 const char *devname; 1030 int chipid; 1031 int ret; 1032 1033 ret = mt9t112_s_power(&priv->subdev, 1); 1034 if (ret < 0) 1035 return ret; 1036 1037 /* Check and show chip ID. */ 1038 mt9t112_reg_read(chipid, client, 0x0000); 1039 1040 switch (chipid) { 1041 case 0x2680: 1042 devname = "mt9t111"; 1043 priv->num_formats = 1; 1044 break; 1045 case 0x2682: 1046 devname = "mt9t112"; 1047 priv->num_formats = ARRAY_SIZE(mt9t112_cfmts); 1048 break; 1049 default: 1050 dev_err(&client->dev, "Product ID error %04x\n", chipid); 1051 ret = -ENODEV; 1052 goto done; 1053 } 1054 1055 dev_info(&client->dev, "%s chip ID %04x\n", devname, chipid); 1056 1057 done: 1058 mt9t112_s_power(&priv->subdev, 0); 1059 1060 return ret; 1061 } 1062 1063 static int mt9t112_probe(struct i2c_client *client, 1064 const struct i2c_device_id *did) 1065 { 1066 struct mt9t112_priv *priv; 1067 int ret; 1068 1069 if (!client->dev.platform_data) { 1070 dev_err(&client->dev, "mt9t112: missing platform data!\n"); 1071 return -EINVAL; 1072 } 1073 1074 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); 1075 if (!priv) 1076 return -ENOMEM; 1077 1078 priv->info = client->dev.platform_data; 1079 priv->init_done = false; 1080 1081 v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops); 1082 1083 priv->clk = devm_clk_get(&client->dev, "extclk"); 1084 if (PTR_ERR(priv->clk) == -ENOENT) { 1085 priv->clk = NULL; 1086 } else if (IS_ERR(priv->clk)) { 1087 dev_err(&client->dev, "Unable to get clock \"extclk\"\n"); 1088 return PTR_ERR(priv->clk); 1089 } 1090 1091 priv->standby_gpio = devm_gpiod_get_optional(&client->dev, "standby", 1092 GPIOD_OUT_HIGH); 1093 if (IS_ERR(priv->standby_gpio)) { 1094 dev_err(&client->dev, "Unable to get gpio \"standby\"\n"); 1095 return PTR_ERR(priv->standby_gpio); 1096 } 1097 1098 ret = mt9t112_camera_probe(client); 1099 if (ret) 1100 return ret; 1101 1102 return v4l2_async_register_subdev(&priv->subdev); 1103 } 1104 1105 static int mt9t112_remove(struct i2c_client *client) 1106 { 1107 struct mt9t112_priv *priv = to_mt9t112(client); 1108 1109 clk_disable_unprepare(priv->clk); 1110 v4l2_async_unregister_subdev(&priv->subdev); 1111 1112 return 0; 1113 } 1114 1115 static const struct i2c_device_id mt9t112_id[] = { 1116 { "mt9t112", 0 }, 1117 { } 1118 }; 1119 MODULE_DEVICE_TABLE(i2c, mt9t112_id); 1120 1121 static struct i2c_driver mt9t112_i2c_driver = { 1122 .driver = { 1123 .name = "mt9t112", 1124 }, 1125 .probe = mt9t112_probe, 1126 .remove = mt9t112_remove, 1127 .id_table = mt9t112_id, 1128 }; 1129 1130 module_i2c_driver(mt9t112_i2c_driver); 1131 1132 MODULE_DESCRIPTION("V4L2 driver for MT9T111/MT9T112 camera sensor"); 1133 MODULE_AUTHOR("Kuninori Morimoto"); 1134 MODULE_LICENSE("GPL v2"); 1135