1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for MT9P031 CMOS Image Sensor from Aptina 4 * 5 * Copyright (C) 2011, Laurent Pinchart <laurent.pinchart@ideasonboard.com> 6 * Copyright (C) 2011, Javier Martin <javier.martin@vista-silicon.com> 7 * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> 8 * 9 * Based on the MT9V032 driver and Bastian Hecht's code. 10 */ 11 12 #include <linux/clk.h> 13 #include <linux/delay.h> 14 #include <linux/device.h> 15 #include <linux/gpio/consumer.h> 16 #include <linux/i2c.h> 17 #include <linux/log2.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_graph.h> 21 #include <linux/pm.h> 22 #include <linux/regulator/consumer.h> 23 #include <linux/slab.h> 24 #include <linux/videodev2.h> 25 26 #include <media/i2c/mt9p031.h> 27 #include <media/v4l2-async.h> 28 #include <media/v4l2-ctrls.h> 29 #include <media/v4l2-device.h> 30 #include <media/v4l2-fwnode.h> 31 #include <media/v4l2-subdev.h> 32 33 #include "aptina-pll.h" 34 35 #define MT9P031_PIXEL_ARRAY_WIDTH 2752 36 #define MT9P031_PIXEL_ARRAY_HEIGHT 2004 37 38 #define MT9P031_CHIP_VERSION 0x00 39 #define MT9P031_CHIP_VERSION_VALUE 0x1801 40 #define MT9P031_ROW_START 0x01 41 #define MT9P031_ROW_START_MIN 0 42 #define MT9P031_ROW_START_MAX 2004 43 #define MT9P031_ROW_START_DEF 54 44 #define MT9P031_COLUMN_START 0x02 45 #define MT9P031_COLUMN_START_MIN 0 46 #define MT9P031_COLUMN_START_MAX 2750 47 #define MT9P031_COLUMN_START_DEF 16 48 #define MT9P031_WINDOW_HEIGHT 0x03 49 #define MT9P031_WINDOW_HEIGHT_MIN 2 50 #define MT9P031_WINDOW_HEIGHT_MAX 2006 51 #define MT9P031_WINDOW_HEIGHT_DEF 1944 52 #define MT9P031_WINDOW_WIDTH 0x04 53 #define MT9P031_WINDOW_WIDTH_MIN 2 54 #define MT9P031_WINDOW_WIDTH_MAX 2752 55 #define MT9P031_WINDOW_WIDTH_DEF 2592 56 #define MT9P031_HORIZONTAL_BLANK 0x05 57 #define MT9P031_HORIZONTAL_BLANK_MIN 0 58 #define MT9P031_HORIZONTAL_BLANK_MAX 4095 59 #define MT9P031_VERTICAL_BLANK 0x06 60 #define MT9P031_VERTICAL_BLANK_MIN 1 61 #define MT9P031_VERTICAL_BLANK_MAX 4096 62 #define MT9P031_VERTICAL_BLANK_DEF 26 63 #define MT9P031_OUTPUT_CONTROL 0x07 64 #define MT9P031_OUTPUT_CONTROL_CEN 2 65 #define MT9P031_OUTPUT_CONTROL_SYN 1 66 #define MT9P031_OUTPUT_CONTROL_DEF 0x1f82 67 #define MT9P031_SHUTTER_WIDTH_UPPER 0x08 68 #define MT9P031_SHUTTER_WIDTH_LOWER 0x09 69 #define MT9P031_SHUTTER_WIDTH_MIN 1 70 #define MT9P031_SHUTTER_WIDTH_MAX 1048575 71 #define MT9P031_SHUTTER_WIDTH_DEF 1943 72 #define MT9P031_PLL_CONTROL 0x10 73 #define MT9P031_PLL_CONTROL_PWROFF 0x0050 74 #define MT9P031_PLL_CONTROL_PWRON 0x0051 75 #define MT9P031_PLL_CONTROL_USEPLL 0x0052 76 #define MT9P031_PLL_CONFIG_1 0x11 77 #define MT9P031_PLL_CONFIG_2 0x12 78 #define MT9P031_PIXEL_CLOCK_CONTROL 0x0a 79 #define MT9P031_PIXEL_CLOCK_INVERT BIT(15) 80 #define MT9P031_PIXEL_CLOCK_SHIFT(n) ((n) << 8) 81 #define MT9P031_PIXEL_CLOCK_DIVIDE(n) ((n) << 0) 82 #define MT9P031_RESTART 0x0b 83 #define MT9P031_FRAME_PAUSE_RESTART BIT(1) 84 #define MT9P031_FRAME_RESTART BIT(0) 85 #define MT9P031_SHUTTER_DELAY 0x0c 86 #define MT9P031_RST 0x0d 87 #define MT9P031_RST_ENABLE BIT(0) 88 #define MT9P031_READ_MODE_1 0x1e 89 #define MT9P031_READ_MODE_2 0x20 90 #define MT9P031_READ_MODE_2_ROW_MIR BIT(15) 91 #define MT9P031_READ_MODE_2_COL_MIR BIT(14) 92 #define MT9P031_READ_MODE_2_ROW_BLC BIT(6) 93 #define MT9P031_ROW_ADDRESS_MODE 0x22 94 #define MT9P031_COLUMN_ADDRESS_MODE 0x23 95 #define MT9P031_GLOBAL_GAIN 0x35 96 #define MT9P031_GLOBAL_GAIN_MIN 8 97 #define MT9P031_GLOBAL_GAIN_MAX 1024 98 #define MT9P031_GLOBAL_GAIN_DEF 8 99 #define MT9P031_GLOBAL_GAIN_MULT BIT(6) 100 #define MT9P031_ROW_BLACK_TARGET 0x49 101 #define MT9P031_ROW_BLACK_DEF_OFFSET 0x4b 102 #define MT9P031_GREEN1_OFFSET 0x60 103 #define MT9P031_GREEN2_OFFSET 0x61 104 #define MT9P031_BLACK_LEVEL_CALIBRATION 0x62 105 #define MT9P031_BLC_MANUAL_BLC BIT(0) 106 #define MT9P031_RED_OFFSET 0x63 107 #define MT9P031_BLUE_OFFSET 0x64 108 #define MT9P031_TEST_PATTERN 0xa0 109 #define MT9P031_TEST_PATTERN_SHIFT 3 110 #define MT9P031_TEST_PATTERN_ENABLE BIT(0) 111 #define MT9P031_TEST_PATTERN_GREEN 0xa1 112 #define MT9P031_TEST_PATTERN_RED 0xa2 113 #define MT9P031_TEST_PATTERN_BLUE 0xa3 114 115 enum mt9p031_model { 116 MT9P031_MODEL_COLOR, 117 MT9P031_MODEL_MONOCHROME, 118 }; 119 120 struct mt9p031 { 121 struct v4l2_subdev subdev; 122 struct media_pad pad; 123 struct v4l2_rect crop; /* Sensor window */ 124 struct v4l2_mbus_framefmt format; 125 struct mt9p031_platform_data *pdata; 126 struct mutex power_lock; /* lock to protect power_count */ 127 int power_count; 128 129 struct clk *clk; 130 struct regulator_bulk_data regulators[3]; 131 132 enum mt9p031_model model; 133 struct aptina_pll pll; 134 unsigned int clk_div; 135 bool use_pll; 136 struct gpio_desc *reset; 137 138 struct v4l2_ctrl_handler ctrls; 139 struct v4l2_ctrl *blc_auto; 140 struct v4l2_ctrl *blc_offset; 141 142 /* Registers cache */ 143 u16 output_control; 144 u16 mode2; 145 }; 146 147 static struct mt9p031 *to_mt9p031(struct v4l2_subdev *sd) 148 { 149 return container_of(sd, struct mt9p031, subdev); 150 } 151 152 static int mt9p031_read(struct i2c_client *client, u8 reg) 153 { 154 return i2c_smbus_read_word_swapped(client, reg); 155 } 156 157 static int mt9p031_write(struct i2c_client *client, u8 reg, u16 data) 158 { 159 return i2c_smbus_write_word_swapped(client, reg, data); 160 } 161 162 static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear, 163 u16 set) 164 { 165 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 166 u16 value = (mt9p031->output_control & ~clear) | set; 167 int ret; 168 169 ret = mt9p031_write(client, MT9P031_OUTPUT_CONTROL, value); 170 if (ret < 0) 171 return ret; 172 173 mt9p031->output_control = value; 174 return 0; 175 } 176 177 static int mt9p031_set_mode2(struct mt9p031 *mt9p031, u16 clear, u16 set) 178 { 179 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 180 u16 value = (mt9p031->mode2 & ~clear) | set; 181 int ret; 182 183 ret = mt9p031_write(client, MT9P031_READ_MODE_2, value); 184 if (ret < 0) 185 return ret; 186 187 mt9p031->mode2 = value; 188 return 0; 189 } 190 191 static int mt9p031_reset(struct mt9p031 *mt9p031) 192 { 193 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 194 int ret; 195 196 /* Disable chip output, synchronous option update */ 197 ret = mt9p031_write(client, MT9P031_RST, MT9P031_RST_ENABLE); 198 if (ret < 0) 199 return ret; 200 ret = mt9p031_write(client, MT9P031_RST, 0); 201 if (ret < 0) 202 return ret; 203 204 ret = mt9p031_write(client, MT9P031_PIXEL_CLOCK_CONTROL, 205 MT9P031_PIXEL_CLOCK_DIVIDE(mt9p031->clk_div)); 206 if (ret < 0) 207 return ret; 208 209 return mt9p031_set_output_control(mt9p031, MT9P031_OUTPUT_CONTROL_CEN, 210 0); 211 } 212 213 static int mt9p031_clk_setup(struct mt9p031 *mt9p031) 214 { 215 static const struct aptina_pll_limits limits = { 216 .ext_clock_min = 6000000, 217 .ext_clock_max = 27000000, 218 .int_clock_min = 2000000, 219 .int_clock_max = 13500000, 220 .out_clock_min = 180000000, 221 .out_clock_max = 360000000, 222 .pix_clock_max = 96000000, 223 .n_min = 1, 224 .n_max = 64, 225 .m_min = 16, 226 .m_max = 255, 227 .p1_min = 1, 228 .p1_max = 128, 229 }; 230 231 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 232 struct mt9p031_platform_data *pdata = mt9p031->pdata; 233 unsigned long ext_freq; 234 int ret; 235 236 mt9p031->clk = devm_clk_get(&client->dev, NULL); 237 if (IS_ERR(mt9p031->clk)) 238 return PTR_ERR(mt9p031->clk); 239 240 ret = clk_set_rate(mt9p031->clk, pdata->ext_freq); 241 if (ret < 0) 242 return ret; 243 244 ext_freq = clk_get_rate(mt9p031->clk); 245 246 /* If the external clock frequency is out of bounds for the PLL use the 247 * pixel clock divider only and disable the PLL. 248 */ 249 if (ext_freq > limits.ext_clock_max) { 250 unsigned int div; 251 252 div = DIV_ROUND_UP(ext_freq, pdata->target_freq); 253 div = roundup_pow_of_two(div) / 2; 254 255 mt9p031->clk_div = min_t(unsigned int, div, 64); 256 mt9p031->use_pll = false; 257 258 return 0; 259 } 260 261 mt9p031->pll.ext_clock = ext_freq; 262 mt9p031->pll.pix_clock = pdata->target_freq; 263 mt9p031->use_pll = true; 264 265 return aptina_pll_calculate(&client->dev, &limits, &mt9p031->pll); 266 } 267 268 static int mt9p031_pll_enable(struct mt9p031 *mt9p031) 269 { 270 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 271 int ret; 272 273 if (!mt9p031->use_pll) 274 return 0; 275 276 ret = mt9p031_write(client, MT9P031_PLL_CONTROL, 277 MT9P031_PLL_CONTROL_PWRON); 278 if (ret < 0) 279 return ret; 280 281 ret = mt9p031_write(client, MT9P031_PLL_CONFIG_1, 282 (mt9p031->pll.m << 8) | (mt9p031->pll.n - 1)); 283 if (ret < 0) 284 return ret; 285 286 ret = mt9p031_write(client, MT9P031_PLL_CONFIG_2, mt9p031->pll.p1 - 1); 287 if (ret < 0) 288 return ret; 289 290 usleep_range(1000, 2000); 291 ret = mt9p031_write(client, MT9P031_PLL_CONTROL, 292 MT9P031_PLL_CONTROL_PWRON | 293 MT9P031_PLL_CONTROL_USEPLL); 294 return ret; 295 } 296 297 static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031) 298 { 299 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 300 301 if (!mt9p031->use_pll) 302 return 0; 303 304 return mt9p031_write(client, MT9P031_PLL_CONTROL, 305 MT9P031_PLL_CONTROL_PWROFF); 306 } 307 308 static int mt9p031_power_on(struct mt9p031 *mt9p031) 309 { 310 int ret; 311 312 /* Ensure RESET_BAR is active */ 313 if (mt9p031->reset) { 314 gpiod_set_value(mt9p031->reset, 1); 315 usleep_range(1000, 2000); 316 } 317 318 /* Bring up the supplies */ 319 ret = regulator_bulk_enable(ARRAY_SIZE(mt9p031->regulators), 320 mt9p031->regulators); 321 if (ret < 0) 322 return ret; 323 324 /* Enable clock */ 325 if (mt9p031->clk) { 326 ret = clk_prepare_enable(mt9p031->clk); 327 if (ret) { 328 regulator_bulk_disable(ARRAY_SIZE(mt9p031->regulators), 329 mt9p031->regulators); 330 return ret; 331 } 332 } 333 334 /* Now RESET_BAR must be high */ 335 if (mt9p031->reset) { 336 gpiod_set_value(mt9p031->reset, 0); 337 usleep_range(1000, 2000); 338 } 339 340 return 0; 341 } 342 343 static void mt9p031_power_off(struct mt9p031 *mt9p031) 344 { 345 if (mt9p031->reset) { 346 gpiod_set_value(mt9p031->reset, 1); 347 usleep_range(1000, 2000); 348 } 349 350 regulator_bulk_disable(ARRAY_SIZE(mt9p031->regulators), 351 mt9p031->regulators); 352 353 clk_disable_unprepare(mt9p031->clk); 354 } 355 356 static int __mt9p031_set_power(struct mt9p031 *mt9p031, bool on) 357 { 358 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 359 int ret; 360 361 if (!on) { 362 mt9p031_power_off(mt9p031); 363 return 0; 364 } 365 366 ret = mt9p031_power_on(mt9p031); 367 if (ret < 0) 368 return ret; 369 370 ret = mt9p031_reset(mt9p031); 371 if (ret < 0) { 372 dev_err(&client->dev, "Failed to reset the camera\n"); 373 return ret; 374 } 375 376 /* Configure the pixel clock polarity */ 377 if (mt9p031->pdata && mt9p031->pdata->pixclk_pol) { 378 ret = mt9p031_write(client, MT9P031_PIXEL_CLOCK_CONTROL, 379 MT9P031_PIXEL_CLOCK_INVERT); 380 if (ret < 0) 381 return ret; 382 } 383 384 return v4l2_ctrl_handler_setup(&mt9p031->ctrls); 385 } 386 387 /* ----------------------------------------------------------------------------- 388 * V4L2 subdev video operations 389 */ 390 391 static int mt9p031_set_params(struct mt9p031 *mt9p031) 392 { 393 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 394 struct v4l2_mbus_framefmt *format = &mt9p031->format; 395 const struct v4l2_rect *crop = &mt9p031->crop; 396 unsigned int hblank; 397 unsigned int vblank; 398 unsigned int xskip; 399 unsigned int yskip; 400 unsigned int xbin; 401 unsigned int ybin; 402 int ret; 403 404 /* Windows position and size. 405 * 406 * TODO: Make sure the start coordinates and window size match the 407 * skipping, binning and mirroring (see description of registers 2 and 4 408 * in table 13, and Binning section on page 41). 409 */ 410 ret = mt9p031_write(client, MT9P031_COLUMN_START, crop->left); 411 if (ret < 0) 412 return ret; 413 ret = mt9p031_write(client, MT9P031_ROW_START, crop->top); 414 if (ret < 0) 415 return ret; 416 ret = mt9p031_write(client, MT9P031_WINDOW_WIDTH, crop->width - 1); 417 if (ret < 0) 418 return ret; 419 ret = mt9p031_write(client, MT9P031_WINDOW_HEIGHT, crop->height - 1); 420 if (ret < 0) 421 return ret; 422 423 /* Row and column binning and skipping. Use the maximum binning value 424 * compatible with the skipping settings. 425 */ 426 xskip = DIV_ROUND_CLOSEST(crop->width, format->width); 427 yskip = DIV_ROUND_CLOSEST(crop->height, format->height); 428 xbin = 1 << (ffs(xskip) - 1); 429 ybin = 1 << (ffs(yskip) - 1); 430 431 ret = mt9p031_write(client, MT9P031_COLUMN_ADDRESS_MODE, 432 ((xbin - 1) << 4) | (xskip - 1)); 433 if (ret < 0) 434 return ret; 435 ret = mt9p031_write(client, MT9P031_ROW_ADDRESS_MODE, 436 ((ybin - 1) << 4) | (yskip - 1)); 437 if (ret < 0) 438 return ret; 439 440 /* Blanking - use minimum value for horizontal blanking and default 441 * value for vertical blanking. 442 */ 443 hblank = 346 * ybin + 64 + (80 >> min_t(unsigned int, xbin, 3)); 444 vblank = MT9P031_VERTICAL_BLANK_DEF; 445 446 ret = mt9p031_write(client, MT9P031_HORIZONTAL_BLANK, hblank - 1); 447 if (ret < 0) 448 return ret; 449 ret = mt9p031_write(client, MT9P031_VERTICAL_BLANK, vblank - 1); 450 if (ret < 0) 451 return ret; 452 453 return ret; 454 } 455 456 static int mt9p031_s_stream(struct v4l2_subdev *subdev, int enable) 457 { 458 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 459 struct i2c_client *client = v4l2_get_subdevdata(subdev); 460 int val; 461 int ret; 462 463 if (!enable) { 464 /* enable pause restart */ 465 val = MT9P031_FRAME_PAUSE_RESTART; 466 ret = mt9p031_write(client, MT9P031_RESTART, val); 467 if (ret < 0) 468 return ret; 469 470 /* enable restart + keep pause restart set */ 471 val |= MT9P031_FRAME_RESTART; 472 ret = mt9p031_write(client, MT9P031_RESTART, val); 473 if (ret < 0) 474 return ret; 475 476 /* Stop sensor readout */ 477 ret = mt9p031_set_output_control(mt9p031, 478 MT9P031_OUTPUT_CONTROL_CEN, 0); 479 if (ret < 0) 480 return ret; 481 482 return mt9p031_pll_disable(mt9p031); 483 } 484 485 ret = mt9p031_set_params(mt9p031); 486 if (ret < 0) 487 return ret; 488 489 /* Switch to master "normal" mode */ 490 ret = mt9p031_set_output_control(mt9p031, 0, 491 MT9P031_OUTPUT_CONTROL_CEN); 492 if (ret < 0) 493 return ret; 494 495 /* 496 * - clear pause restart 497 * - don't clear restart as clearing restart manually can cause 498 * undefined behavior 499 */ 500 val = MT9P031_FRAME_RESTART; 501 ret = mt9p031_write(client, MT9P031_RESTART, val); 502 if (ret < 0) 503 return ret; 504 505 return mt9p031_pll_enable(mt9p031); 506 } 507 508 static int mt9p031_enum_mbus_code(struct v4l2_subdev *subdev, 509 struct v4l2_subdev_state *sd_state, 510 struct v4l2_subdev_mbus_code_enum *code) 511 { 512 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 513 514 if (code->pad || code->index) 515 return -EINVAL; 516 517 code->code = mt9p031->format.code; 518 return 0; 519 } 520 521 static int mt9p031_enum_frame_size(struct v4l2_subdev *subdev, 522 struct v4l2_subdev_state *sd_state, 523 struct v4l2_subdev_frame_size_enum *fse) 524 { 525 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 526 527 if (fse->index >= 8 || fse->code != mt9p031->format.code) 528 return -EINVAL; 529 530 fse->min_width = MT9P031_WINDOW_WIDTH_DEF 531 / min_t(unsigned int, 7, fse->index + 1); 532 fse->max_width = fse->min_width; 533 fse->min_height = MT9P031_WINDOW_HEIGHT_DEF / (fse->index + 1); 534 fse->max_height = fse->min_height; 535 536 return 0; 537 } 538 539 static struct v4l2_mbus_framefmt * 540 __mt9p031_get_pad_format(struct mt9p031 *mt9p031, 541 struct v4l2_subdev_state *sd_state, 542 unsigned int pad, u32 which) 543 { 544 switch (which) { 545 case V4L2_SUBDEV_FORMAT_TRY: 546 return v4l2_subdev_get_try_format(&mt9p031->subdev, sd_state, 547 pad); 548 case V4L2_SUBDEV_FORMAT_ACTIVE: 549 return &mt9p031->format; 550 default: 551 return NULL; 552 } 553 } 554 555 static struct v4l2_rect * 556 __mt9p031_get_pad_crop(struct mt9p031 *mt9p031, 557 struct v4l2_subdev_state *sd_state, 558 unsigned int pad, u32 which) 559 { 560 switch (which) { 561 case V4L2_SUBDEV_FORMAT_TRY: 562 return v4l2_subdev_get_try_crop(&mt9p031->subdev, sd_state, 563 pad); 564 case V4L2_SUBDEV_FORMAT_ACTIVE: 565 return &mt9p031->crop; 566 default: 567 return NULL; 568 } 569 } 570 571 static int mt9p031_get_format(struct v4l2_subdev *subdev, 572 struct v4l2_subdev_state *sd_state, 573 struct v4l2_subdev_format *fmt) 574 { 575 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 576 577 fmt->format = *__mt9p031_get_pad_format(mt9p031, sd_state, fmt->pad, 578 fmt->which); 579 return 0; 580 } 581 582 static int mt9p031_set_format(struct v4l2_subdev *subdev, 583 struct v4l2_subdev_state *sd_state, 584 struct v4l2_subdev_format *format) 585 { 586 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 587 struct v4l2_mbus_framefmt *__format; 588 struct v4l2_rect *__crop; 589 unsigned int width; 590 unsigned int height; 591 unsigned int hratio; 592 unsigned int vratio; 593 594 __crop = __mt9p031_get_pad_crop(mt9p031, sd_state, format->pad, 595 format->which); 596 597 /* Clamp the width and height to avoid dividing by zero. */ 598 width = clamp_t(unsigned int, ALIGN(format->format.width, 2), 599 max_t(unsigned int, __crop->width / 7, 600 MT9P031_WINDOW_WIDTH_MIN), 601 __crop->width); 602 height = clamp_t(unsigned int, ALIGN(format->format.height, 2), 603 max_t(unsigned int, __crop->height / 8, 604 MT9P031_WINDOW_HEIGHT_MIN), 605 __crop->height); 606 607 hratio = DIV_ROUND_CLOSEST(__crop->width, width); 608 vratio = DIV_ROUND_CLOSEST(__crop->height, height); 609 610 __format = __mt9p031_get_pad_format(mt9p031, sd_state, format->pad, 611 format->which); 612 __format->width = __crop->width / hratio; 613 __format->height = __crop->height / vratio; 614 615 format->format = *__format; 616 617 return 0; 618 } 619 620 static int mt9p031_get_selection(struct v4l2_subdev *subdev, 621 struct v4l2_subdev_state *sd_state, 622 struct v4l2_subdev_selection *sel) 623 { 624 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 625 626 if (sel->target != V4L2_SEL_TGT_CROP) 627 return -EINVAL; 628 629 sel->r = *__mt9p031_get_pad_crop(mt9p031, sd_state, sel->pad, 630 sel->which); 631 return 0; 632 } 633 634 static int mt9p031_set_selection(struct v4l2_subdev *subdev, 635 struct v4l2_subdev_state *sd_state, 636 struct v4l2_subdev_selection *sel) 637 { 638 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 639 struct v4l2_mbus_framefmt *__format; 640 struct v4l2_rect *__crop; 641 struct v4l2_rect rect; 642 643 if (sel->target != V4L2_SEL_TGT_CROP) 644 return -EINVAL; 645 646 /* Clamp the crop rectangle boundaries and align them to a multiple of 2 647 * pixels to ensure a GRBG Bayer pattern. 648 */ 649 rect.left = clamp(ALIGN(sel->r.left, 2), MT9P031_COLUMN_START_MIN, 650 MT9P031_COLUMN_START_MAX); 651 rect.top = clamp(ALIGN(sel->r.top, 2), MT9P031_ROW_START_MIN, 652 MT9P031_ROW_START_MAX); 653 rect.width = clamp_t(unsigned int, ALIGN(sel->r.width, 2), 654 MT9P031_WINDOW_WIDTH_MIN, 655 MT9P031_WINDOW_WIDTH_MAX); 656 rect.height = clamp_t(unsigned int, ALIGN(sel->r.height, 2), 657 MT9P031_WINDOW_HEIGHT_MIN, 658 MT9P031_WINDOW_HEIGHT_MAX); 659 660 rect.width = min_t(unsigned int, rect.width, 661 MT9P031_PIXEL_ARRAY_WIDTH - rect.left); 662 rect.height = min_t(unsigned int, rect.height, 663 MT9P031_PIXEL_ARRAY_HEIGHT - rect.top); 664 665 __crop = __mt9p031_get_pad_crop(mt9p031, sd_state, sel->pad, 666 sel->which); 667 668 if (rect.width != __crop->width || rect.height != __crop->height) { 669 /* Reset the output image size if the crop rectangle size has 670 * been modified. 671 */ 672 __format = __mt9p031_get_pad_format(mt9p031, sd_state, 673 sel->pad, 674 sel->which); 675 __format->width = rect.width; 676 __format->height = rect.height; 677 } 678 679 *__crop = rect; 680 sel->r = rect; 681 682 return 0; 683 } 684 685 /* ----------------------------------------------------------------------------- 686 * V4L2 subdev control operations 687 */ 688 689 #define V4L2_CID_BLC_AUTO (V4L2_CID_USER_BASE | 0x1002) 690 #define V4L2_CID_BLC_TARGET_LEVEL (V4L2_CID_USER_BASE | 0x1003) 691 #define V4L2_CID_BLC_ANALOG_OFFSET (V4L2_CID_USER_BASE | 0x1004) 692 #define V4L2_CID_BLC_DIGITAL_OFFSET (V4L2_CID_USER_BASE | 0x1005) 693 694 static int mt9p031_restore_blc(struct mt9p031 *mt9p031) 695 { 696 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 697 int ret; 698 699 if (mt9p031->blc_auto->cur.val != 0) { 700 ret = mt9p031_set_mode2(mt9p031, 0, 701 MT9P031_READ_MODE_2_ROW_BLC); 702 if (ret < 0) 703 return ret; 704 } 705 706 if (mt9p031->blc_offset->cur.val != 0) { 707 ret = mt9p031_write(client, MT9P031_ROW_BLACK_TARGET, 708 mt9p031->blc_offset->cur.val); 709 if (ret < 0) 710 return ret; 711 } 712 713 return 0; 714 } 715 716 static int mt9p031_s_ctrl(struct v4l2_ctrl *ctrl) 717 { 718 struct mt9p031 *mt9p031 = 719 container_of(ctrl->handler, struct mt9p031, ctrls); 720 struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); 721 u16 data; 722 int ret; 723 724 if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE) 725 return 0; 726 727 switch (ctrl->id) { 728 case V4L2_CID_EXPOSURE: 729 ret = mt9p031_write(client, MT9P031_SHUTTER_WIDTH_UPPER, 730 (ctrl->val >> 16) & 0xffff); 731 if (ret < 0) 732 return ret; 733 734 return mt9p031_write(client, MT9P031_SHUTTER_WIDTH_LOWER, 735 ctrl->val & 0xffff); 736 737 case V4L2_CID_GAIN: 738 /* Gain is controlled by 2 analog stages and a digital stage. 739 * Valid values for the 3 stages are 740 * 741 * Stage Min Max Step 742 * ------------------------------------------ 743 * First analog stage x1 x2 1 744 * Second analog stage x1 x4 0.125 745 * Digital stage x1 x16 0.125 746 * 747 * To minimize noise, the gain stages should be used in the 748 * second analog stage, first analog stage, digital stage order. 749 * Gain from a previous stage should be pushed to its maximum 750 * value before the next stage is used. 751 */ 752 if (ctrl->val <= 32) { 753 data = ctrl->val; 754 } else if (ctrl->val <= 64) { 755 ctrl->val &= ~1; 756 data = (1 << 6) | (ctrl->val >> 1); 757 } else { 758 ctrl->val &= ~7; 759 data = ((ctrl->val - 64) << 5) | (1 << 6) | 32; 760 } 761 762 return mt9p031_write(client, MT9P031_GLOBAL_GAIN, data); 763 764 case V4L2_CID_HFLIP: 765 if (ctrl->val) 766 return mt9p031_set_mode2(mt9p031, 767 0, MT9P031_READ_MODE_2_COL_MIR); 768 else 769 return mt9p031_set_mode2(mt9p031, 770 MT9P031_READ_MODE_2_COL_MIR, 0); 771 772 case V4L2_CID_VFLIP: 773 if (ctrl->val) 774 return mt9p031_set_mode2(mt9p031, 775 0, MT9P031_READ_MODE_2_ROW_MIR); 776 else 777 return mt9p031_set_mode2(mt9p031, 778 MT9P031_READ_MODE_2_ROW_MIR, 0); 779 780 case V4L2_CID_TEST_PATTERN: 781 /* The digital side of the Black Level Calibration function must 782 * be disabled when generating a test pattern to avoid artifacts 783 * in the image. Activate (deactivate) the BLC-related controls 784 * when the test pattern is enabled (disabled). 785 */ 786 v4l2_ctrl_activate(mt9p031->blc_auto, ctrl->val == 0); 787 v4l2_ctrl_activate(mt9p031->blc_offset, ctrl->val == 0); 788 789 if (!ctrl->val) { 790 /* Restore the BLC settings. */ 791 ret = mt9p031_restore_blc(mt9p031); 792 if (ret < 0) 793 return ret; 794 795 return mt9p031_write(client, MT9P031_TEST_PATTERN, 0); 796 } 797 798 ret = mt9p031_write(client, MT9P031_TEST_PATTERN_GREEN, 0x05a0); 799 if (ret < 0) 800 return ret; 801 ret = mt9p031_write(client, MT9P031_TEST_PATTERN_RED, 0x0a50); 802 if (ret < 0) 803 return ret; 804 ret = mt9p031_write(client, MT9P031_TEST_PATTERN_BLUE, 0x0aa0); 805 if (ret < 0) 806 return ret; 807 808 /* Disable digital BLC when generating a test pattern. */ 809 ret = mt9p031_set_mode2(mt9p031, MT9P031_READ_MODE_2_ROW_BLC, 810 0); 811 if (ret < 0) 812 return ret; 813 814 ret = mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, 0); 815 if (ret < 0) 816 return ret; 817 818 return mt9p031_write(client, MT9P031_TEST_PATTERN, 819 ((ctrl->val - 1) << MT9P031_TEST_PATTERN_SHIFT) 820 | MT9P031_TEST_PATTERN_ENABLE); 821 822 case V4L2_CID_BLC_AUTO: 823 ret = mt9p031_set_mode2(mt9p031, 824 ctrl->val ? 0 : MT9P031_READ_MODE_2_ROW_BLC, 825 ctrl->val ? MT9P031_READ_MODE_2_ROW_BLC : 0); 826 if (ret < 0) 827 return ret; 828 829 return mt9p031_write(client, MT9P031_BLACK_LEVEL_CALIBRATION, 830 ctrl->val ? 0 : MT9P031_BLC_MANUAL_BLC); 831 832 case V4L2_CID_BLC_TARGET_LEVEL: 833 return mt9p031_write(client, MT9P031_ROW_BLACK_TARGET, 834 ctrl->val); 835 836 case V4L2_CID_BLC_ANALOG_OFFSET: 837 data = ctrl->val & ((1 << 9) - 1); 838 839 ret = mt9p031_write(client, MT9P031_GREEN1_OFFSET, data); 840 if (ret < 0) 841 return ret; 842 ret = mt9p031_write(client, MT9P031_GREEN2_OFFSET, data); 843 if (ret < 0) 844 return ret; 845 ret = mt9p031_write(client, MT9P031_RED_OFFSET, data); 846 if (ret < 0) 847 return ret; 848 return mt9p031_write(client, MT9P031_BLUE_OFFSET, data); 849 850 case V4L2_CID_BLC_DIGITAL_OFFSET: 851 return mt9p031_write(client, MT9P031_ROW_BLACK_DEF_OFFSET, 852 ctrl->val & ((1 << 12) - 1)); 853 } 854 855 return 0; 856 } 857 858 static const struct v4l2_ctrl_ops mt9p031_ctrl_ops = { 859 .s_ctrl = mt9p031_s_ctrl, 860 }; 861 862 static const char * const mt9p031_test_pattern_menu[] = { 863 "Disabled", 864 "Color Field", 865 "Horizontal Gradient", 866 "Vertical Gradient", 867 "Diagonal Gradient", 868 "Classic Test Pattern", 869 "Walking 1s", 870 "Monochrome Horizontal Bars", 871 "Monochrome Vertical Bars", 872 "Vertical Color Bars", 873 }; 874 875 static const struct v4l2_ctrl_config mt9p031_ctrls[] = { 876 { 877 .ops = &mt9p031_ctrl_ops, 878 .id = V4L2_CID_BLC_AUTO, 879 .type = V4L2_CTRL_TYPE_BOOLEAN, 880 .name = "BLC, Auto", 881 .min = 0, 882 .max = 1, 883 .step = 1, 884 .def = 1, 885 .flags = 0, 886 }, { 887 .ops = &mt9p031_ctrl_ops, 888 .id = V4L2_CID_BLC_TARGET_LEVEL, 889 .type = V4L2_CTRL_TYPE_INTEGER, 890 .name = "BLC Target Level", 891 .min = 0, 892 .max = 4095, 893 .step = 1, 894 .def = 168, 895 .flags = 0, 896 }, { 897 .ops = &mt9p031_ctrl_ops, 898 .id = V4L2_CID_BLC_ANALOG_OFFSET, 899 .type = V4L2_CTRL_TYPE_INTEGER, 900 .name = "BLC Analog Offset", 901 .min = -255, 902 .max = 255, 903 .step = 1, 904 .def = 32, 905 .flags = 0, 906 }, { 907 .ops = &mt9p031_ctrl_ops, 908 .id = V4L2_CID_BLC_DIGITAL_OFFSET, 909 .type = V4L2_CTRL_TYPE_INTEGER, 910 .name = "BLC Digital Offset", 911 .min = -2048, 912 .max = 2047, 913 .step = 1, 914 .def = 40, 915 .flags = 0, 916 } 917 }; 918 919 /* ----------------------------------------------------------------------------- 920 * V4L2 subdev core operations 921 */ 922 923 static int mt9p031_set_power(struct v4l2_subdev *subdev, int on) 924 { 925 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 926 int ret = 0; 927 928 mutex_lock(&mt9p031->power_lock); 929 930 /* If the power count is modified from 0 to != 0 or from != 0 to 0, 931 * update the power state. 932 */ 933 if (mt9p031->power_count == !on) { 934 ret = __mt9p031_set_power(mt9p031, !!on); 935 if (ret < 0) 936 goto out; 937 } 938 939 /* Update the power count. */ 940 mt9p031->power_count += on ? 1 : -1; 941 WARN_ON(mt9p031->power_count < 0); 942 943 out: 944 mutex_unlock(&mt9p031->power_lock); 945 return ret; 946 } 947 948 /* ----------------------------------------------------------------------------- 949 * V4L2 subdev internal operations 950 */ 951 952 static int mt9p031_registered(struct v4l2_subdev *subdev) 953 { 954 struct i2c_client *client = v4l2_get_subdevdata(subdev); 955 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 956 s32 data; 957 int ret; 958 959 ret = mt9p031_power_on(mt9p031); 960 if (ret < 0) { 961 dev_err(&client->dev, "MT9P031 power up failed\n"); 962 return ret; 963 } 964 965 /* Read out the chip version register */ 966 data = mt9p031_read(client, MT9P031_CHIP_VERSION); 967 mt9p031_power_off(mt9p031); 968 969 if (data != MT9P031_CHIP_VERSION_VALUE) { 970 dev_err(&client->dev, "MT9P031 not detected, wrong version " 971 "0x%04x\n", data); 972 return -ENODEV; 973 } 974 975 dev_info(&client->dev, "MT9P031 detected at address 0x%02x\n", 976 client->addr); 977 978 return 0; 979 } 980 981 static int mt9p031_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) 982 { 983 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 984 struct v4l2_mbus_framefmt *format; 985 struct v4l2_rect *crop; 986 987 crop = v4l2_subdev_get_try_crop(subdev, fh->state, 0); 988 crop->left = MT9P031_COLUMN_START_DEF; 989 crop->top = MT9P031_ROW_START_DEF; 990 crop->width = MT9P031_WINDOW_WIDTH_DEF; 991 crop->height = MT9P031_WINDOW_HEIGHT_DEF; 992 993 format = v4l2_subdev_get_try_format(subdev, fh->state, 0); 994 995 if (mt9p031->model == MT9P031_MODEL_MONOCHROME) 996 format->code = MEDIA_BUS_FMT_Y12_1X12; 997 else 998 format->code = MEDIA_BUS_FMT_SGRBG12_1X12; 999 1000 format->width = MT9P031_WINDOW_WIDTH_DEF; 1001 format->height = MT9P031_WINDOW_HEIGHT_DEF; 1002 format->field = V4L2_FIELD_NONE; 1003 format->colorspace = V4L2_COLORSPACE_SRGB; 1004 1005 return mt9p031_set_power(subdev, 1); 1006 } 1007 1008 static int mt9p031_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) 1009 { 1010 return mt9p031_set_power(subdev, 0); 1011 } 1012 1013 static const struct v4l2_subdev_core_ops mt9p031_subdev_core_ops = { 1014 .s_power = mt9p031_set_power, 1015 }; 1016 1017 static const struct v4l2_subdev_video_ops mt9p031_subdev_video_ops = { 1018 .s_stream = mt9p031_s_stream, 1019 }; 1020 1021 static const struct v4l2_subdev_pad_ops mt9p031_subdev_pad_ops = { 1022 .enum_mbus_code = mt9p031_enum_mbus_code, 1023 .enum_frame_size = mt9p031_enum_frame_size, 1024 .get_fmt = mt9p031_get_format, 1025 .set_fmt = mt9p031_set_format, 1026 .get_selection = mt9p031_get_selection, 1027 .set_selection = mt9p031_set_selection, 1028 }; 1029 1030 static const struct v4l2_subdev_ops mt9p031_subdev_ops = { 1031 .core = &mt9p031_subdev_core_ops, 1032 .video = &mt9p031_subdev_video_ops, 1033 .pad = &mt9p031_subdev_pad_ops, 1034 }; 1035 1036 static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { 1037 .registered = mt9p031_registered, 1038 .open = mt9p031_open, 1039 .close = mt9p031_close, 1040 }; 1041 1042 /* ----------------------------------------------------------------------------- 1043 * Driver initialization and probing 1044 */ 1045 1046 static struct mt9p031_platform_data * 1047 mt9p031_get_pdata(struct i2c_client *client) 1048 { 1049 struct mt9p031_platform_data *pdata = NULL; 1050 struct device_node *np; 1051 struct v4l2_fwnode_endpoint endpoint = { 1052 .bus_type = V4L2_MBUS_PARALLEL 1053 }; 1054 1055 if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node) 1056 return client->dev.platform_data; 1057 1058 np = of_graph_get_next_endpoint(client->dev.of_node, NULL); 1059 if (!np) 1060 return NULL; 1061 1062 if (v4l2_fwnode_endpoint_parse(of_fwnode_handle(np), &endpoint) < 0) 1063 goto done; 1064 1065 pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); 1066 if (!pdata) 1067 goto done; 1068 1069 of_property_read_u32(np, "input-clock-frequency", &pdata->ext_freq); 1070 of_property_read_u32(np, "pixel-clock-frequency", &pdata->target_freq); 1071 1072 pdata->pixclk_pol = !!(endpoint.bus.parallel.flags & 1073 V4L2_MBUS_PCLK_SAMPLE_RISING); 1074 1075 done: 1076 of_node_put(np); 1077 return pdata; 1078 } 1079 1080 static int mt9p031_probe(struct i2c_client *client, 1081 const struct i2c_device_id *did) 1082 { 1083 struct mt9p031_platform_data *pdata = mt9p031_get_pdata(client); 1084 struct i2c_adapter *adapter = client->adapter; 1085 struct mt9p031 *mt9p031; 1086 unsigned int i; 1087 int ret; 1088 1089 if (pdata == NULL) { 1090 dev_err(&client->dev, "No platform data\n"); 1091 return -EINVAL; 1092 } 1093 1094 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { 1095 dev_warn(&client->dev, 1096 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); 1097 return -EIO; 1098 } 1099 1100 mt9p031 = devm_kzalloc(&client->dev, sizeof(*mt9p031), GFP_KERNEL); 1101 if (mt9p031 == NULL) 1102 return -ENOMEM; 1103 1104 mt9p031->pdata = pdata; 1105 mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF; 1106 mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC; 1107 mt9p031->model = did->driver_data; 1108 1109 mt9p031->regulators[0].supply = "vdd"; 1110 mt9p031->regulators[1].supply = "vdd_io"; 1111 mt9p031->regulators[2].supply = "vaa"; 1112 1113 ret = devm_regulator_bulk_get(&client->dev, 3, mt9p031->regulators); 1114 if (ret < 0) { 1115 dev_err(&client->dev, "Unable to get regulators\n"); 1116 return ret; 1117 } 1118 1119 mutex_init(&mt9p031->power_lock); 1120 1121 v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 6); 1122 1123 v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, 1124 V4L2_CID_EXPOSURE, MT9P031_SHUTTER_WIDTH_MIN, 1125 MT9P031_SHUTTER_WIDTH_MAX, 1, 1126 MT9P031_SHUTTER_WIDTH_DEF); 1127 v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, 1128 V4L2_CID_GAIN, MT9P031_GLOBAL_GAIN_MIN, 1129 MT9P031_GLOBAL_GAIN_MAX, 1, MT9P031_GLOBAL_GAIN_DEF); 1130 v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, 1131 V4L2_CID_HFLIP, 0, 1, 1, 0); 1132 v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, 1133 V4L2_CID_VFLIP, 0, 1, 1, 0); 1134 v4l2_ctrl_new_std(&mt9p031->ctrls, &mt9p031_ctrl_ops, 1135 V4L2_CID_PIXEL_RATE, pdata->target_freq, 1136 pdata->target_freq, 1, pdata->target_freq); 1137 v4l2_ctrl_new_std_menu_items(&mt9p031->ctrls, &mt9p031_ctrl_ops, 1138 V4L2_CID_TEST_PATTERN, 1139 ARRAY_SIZE(mt9p031_test_pattern_menu) - 1, 0, 1140 0, mt9p031_test_pattern_menu); 1141 1142 for (i = 0; i < ARRAY_SIZE(mt9p031_ctrls); ++i) 1143 v4l2_ctrl_new_custom(&mt9p031->ctrls, &mt9p031_ctrls[i], NULL); 1144 1145 mt9p031->subdev.ctrl_handler = &mt9p031->ctrls; 1146 1147 if (mt9p031->ctrls.error) { 1148 printk(KERN_INFO "%s: control initialization error %d\n", 1149 __func__, mt9p031->ctrls.error); 1150 ret = mt9p031->ctrls.error; 1151 goto done; 1152 } 1153 1154 mt9p031->blc_auto = v4l2_ctrl_find(&mt9p031->ctrls, V4L2_CID_BLC_AUTO); 1155 mt9p031->blc_offset = v4l2_ctrl_find(&mt9p031->ctrls, 1156 V4L2_CID_BLC_DIGITAL_OFFSET); 1157 1158 v4l2_i2c_subdev_init(&mt9p031->subdev, client, &mt9p031_subdev_ops); 1159 mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops; 1160 1161 mt9p031->subdev.entity.function = MEDIA_ENT_F_CAM_SENSOR; 1162 mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE; 1163 ret = media_entity_pads_init(&mt9p031->subdev.entity, 1, &mt9p031->pad); 1164 if (ret < 0) 1165 goto done; 1166 1167 mt9p031->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 1168 1169 mt9p031->crop.width = MT9P031_WINDOW_WIDTH_DEF; 1170 mt9p031->crop.height = MT9P031_WINDOW_HEIGHT_DEF; 1171 mt9p031->crop.left = MT9P031_COLUMN_START_DEF; 1172 mt9p031->crop.top = MT9P031_ROW_START_DEF; 1173 1174 if (mt9p031->model == MT9P031_MODEL_MONOCHROME) 1175 mt9p031->format.code = MEDIA_BUS_FMT_Y12_1X12; 1176 else 1177 mt9p031->format.code = MEDIA_BUS_FMT_SGRBG12_1X12; 1178 1179 mt9p031->format.width = MT9P031_WINDOW_WIDTH_DEF; 1180 mt9p031->format.height = MT9P031_WINDOW_HEIGHT_DEF; 1181 mt9p031->format.field = V4L2_FIELD_NONE; 1182 mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB; 1183 1184 mt9p031->reset = devm_gpiod_get_optional(&client->dev, "reset", 1185 GPIOD_OUT_HIGH); 1186 1187 ret = mt9p031_clk_setup(mt9p031); 1188 if (ret) 1189 goto done; 1190 1191 ret = v4l2_async_register_subdev(&mt9p031->subdev); 1192 1193 done: 1194 if (ret < 0) { 1195 v4l2_ctrl_handler_free(&mt9p031->ctrls); 1196 media_entity_cleanup(&mt9p031->subdev.entity); 1197 mutex_destroy(&mt9p031->power_lock); 1198 } 1199 1200 return ret; 1201 } 1202 1203 static int mt9p031_remove(struct i2c_client *client) 1204 { 1205 struct v4l2_subdev *subdev = i2c_get_clientdata(client); 1206 struct mt9p031 *mt9p031 = to_mt9p031(subdev); 1207 1208 v4l2_ctrl_handler_free(&mt9p031->ctrls); 1209 v4l2_async_unregister_subdev(subdev); 1210 media_entity_cleanup(&subdev->entity); 1211 mutex_destroy(&mt9p031->power_lock); 1212 1213 return 0; 1214 } 1215 1216 static const struct i2c_device_id mt9p031_id[] = { 1217 { "mt9p031", MT9P031_MODEL_COLOR }, 1218 { "mt9p031m", MT9P031_MODEL_MONOCHROME }, 1219 { } 1220 }; 1221 MODULE_DEVICE_TABLE(i2c, mt9p031_id); 1222 1223 #if IS_ENABLED(CONFIG_OF) 1224 static const struct of_device_id mt9p031_of_match[] = { 1225 { .compatible = "aptina,mt9p031", }, 1226 { .compatible = "aptina,mt9p031m", }, 1227 { /* sentinel */ }, 1228 }; 1229 MODULE_DEVICE_TABLE(of, mt9p031_of_match); 1230 #endif 1231 1232 static struct i2c_driver mt9p031_i2c_driver = { 1233 .driver = { 1234 .of_match_table = of_match_ptr(mt9p031_of_match), 1235 .name = "mt9p031", 1236 }, 1237 .probe = mt9p031_probe, 1238 .remove = mt9p031_remove, 1239 .id_table = mt9p031_id, 1240 }; 1241 1242 module_i2c_driver(mt9p031_i2c_driver); 1243 1244 MODULE_DESCRIPTION("Aptina MT9P031 Camera driver"); 1245 MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); 1246 MODULE_LICENSE("GPL v2"); 1247