1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Programming the mspx4xx sound processor family 4 * 5 * (c) 1997-2001 Gerd Knorr <kraxel@bytesex.org> 6 * 7 * what works and what doesn't: 8 * 9 * AM-Mono 10 * Support for Hauppauge cards added (decoding handled by tuner) added by 11 * Frederic Crozat <fcrozat@mail.dotcom.fr> 12 * 13 * FM-Mono 14 * should work. The stereo modes are backward compatible to FM-mono, 15 * therefore FM-Mono should be always available. 16 * 17 * FM-Stereo (B/G, used in germany) 18 * should work, with autodetect 19 * 20 * FM-Stereo (satellite) 21 * should work, no autodetect (i.e. default is mono, but you can 22 * switch to stereo -- untested) 23 * 24 * NICAM (B/G, L , used in UK, Scandinavia, Spain and France) 25 * should work, with autodetect. Support for NICAM was added by 26 * Pekka Pietikainen <pp@netppl.fi> 27 * 28 * TODO: 29 * - better SAT support 30 * 31 * 980623 Thomas Sailer (sailer@ife.ee.ethz.ch) 32 * using soundcore instead of OSS 33 */ 34 35 36 #include <linux/kernel.h> 37 #include <linux/module.h> 38 #include <linux/slab.h> 39 #include <linux/i2c.h> 40 #include <linux/kthread.h> 41 #include <linux/freezer.h> 42 #include <linux/videodev2.h> 43 #include <media/v4l2-device.h> 44 #include <media/v4l2-ioctl.h> 45 #include <media/drv-intf/msp3400.h> 46 #include <media/i2c/tvaudio.h> 47 #include "msp3400-driver.h" 48 49 /* ---------------------------------------------------------------------- */ 50 51 MODULE_DESCRIPTION("device driver for msp34xx TV sound processor"); 52 MODULE_AUTHOR("Gerd Knorr"); 53 MODULE_LICENSE("GPL"); 54 55 /* module parameters */ 56 static int opmode = OPMODE_AUTO; 57 int msp_debug; /* msp_debug output */ 58 bool msp_once; /* no continuous stereo monitoring */ 59 bool msp_amsound; /* hard-wire AM sound at 6.5 Hz (france), 60 the autoscan seems work well only with FM... */ 61 int msp_standard = 1; /* Override auto detect of audio msp_standard, 62 if needed. */ 63 bool msp_dolby; 64 65 int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual 66 (msp34xxg only) 0x00a0-0x03c0 */ 67 68 /* read-only */ 69 module_param(opmode, int, 0444); 70 71 /* read-write */ 72 module_param_named(once, msp_once, bool, 0644); 73 module_param_named(debug, msp_debug, int, 0644); 74 module_param_named(stereo_threshold, msp_stereo_thresh, int, 0644); 75 module_param_named(standard, msp_standard, int, 0644); 76 module_param_named(amsound, msp_amsound, bool, 0644); 77 module_param_named(dolby, msp_dolby, bool, 0644); 78 79 MODULE_PARM_DESC(opmode, "Forces a MSP3400 opmode. 0=Manual, 1=Autodetect, 2=Autodetect and autoselect"); 80 MODULE_PARM_DESC(once, "No continuous stereo monitoring"); 81 MODULE_PARM_DESC(debug, "Enable debug messages [0-3]"); 82 MODULE_PARM_DESC(stereo_threshold, "Sets signal threshold to activate stereo"); 83 MODULE_PARM_DESC(standard, "Specify audio standard: 32 = NTSC, 64 = radio, Default: Autodetect"); 84 MODULE_PARM_DESC(amsound, "Hardwire AM sound at 6.5Hz (France), FM can autoscan"); 85 MODULE_PARM_DESC(dolby, "Activates Dolby processing"); 86 87 /* ---------------------------------------------------------------------- */ 88 89 /* control subaddress */ 90 #define I2C_MSP_CONTROL 0x00 91 /* demodulator unit subaddress */ 92 #define I2C_MSP_DEM 0x10 93 /* DSP unit subaddress */ 94 #define I2C_MSP_DSP 0x12 95 96 97 /* ----------------------------------------------------------------------- */ 98 /* functions for talking to the MSP3400C Sound processor */ 99 100 int msp_reset(struct i2c_client *client) 101 { 102 /* reset and read revision code */ 103 static u8 reset_off[3] = { I2C_MSP_CONTROL, 0x80, 0x00 }; 104 static u8 reset_on[3] = { I2C_MSP_CONTROL, 0x00, 0x00 }; 105 static u8 write[3] = { I2C_MSP_DSP + 1, 0x00, 0x1e }; 106 u8 read[2]; 107 struct i2c_msg reset[2] = { 108 { 109 .addr = client->addr, 110 .flags = I2C_M_IGNORE_NAK, 111 .len = 3, 112 .buf = reset_off 113 }, 114 { 115 .addr = client->addr, 116 .flags = I2C_M_IGNORE_NAK, 117 .len = 3, 118 .buf = reset_on 119 }, 120 }; 121 struct i2c_msg test[2] = { 122 { 123 .addr = client->addr, 124 .len = 3, 125 .buf = write 126 }, 127 { 128 .addr = client->addr, 129 .flags = I2C_M_RD, 130 .len = 2, 131 .buf = read 132 }, 133 }; 134 135 dev_dbg_lvl(&client->dev, 3, msp_debug, "msp_reset\n"); 136 if (i2c_transfer(client->adapter, &reset[0], 1) != 1 || 137 i2c_transfer(client->adapter, &reset[1], 1) != 1 || 138 i2c_transfer(client->adapter, test, 2) != 2) { 139 dev_err(&client->dev, "chip reset failed\n"); 140 return -1; 141 } 142 return 0; 143 } 144 145 static int msp_read(struct i2c_client *client, int dev, int addr) 146 { 147 int err, retval; 148 u8 write[3]; 149 u8 read[2]; 150 struct i2c_msg msgs[2] = { 151 { 152 .addr = client->addr, 153 .len = 3, 154 .buf = write 155 }, 156 { 157 .addr = client->addr, 158 .flags = I2C_M_RD, 159 .len = 2, 160 .buf = read 161 } 162 }; 163 164 write[0] = dev + 1; 165 write[1] = addr >> 8; 166 write[2] = addr & 0xff; 167 168 for (err = 0; err < 3; err++) { 169 if (i2c_transfer(client->adapter, msgs, 2) == 2) 170 break; 171 dev_warn(&client->dev, "I/O error #%d (read 0x%02x/0x%02x)\n", err, 172 dev, addr); 173 schedule_timeout_interruptible(msecs_to_jiffies(10)); 174 } 175 if (err == 3) { 176 dev_warn(&client->dev, "resetting chip, sound will go off.\n"); 177 msp_reset(client); 178 return -1; 179 } 180 retval = read[0] << 8 | read[1]; 181 dev_dbg_lvl(&client->dev, 3, msp_debug, "msp_read(0x%x, 0x%x): 0x%x\n", 182 dev, addr, retval); 183 return retval; 184 } 185 186 int msp_read_dem(struct i2c_client *client, int addr) 187 { 188 return msp_read(client, I2C_MSP_DEM, addr); 189 } 190 191 int msp_read_dsp(struct i2c_client *client, int addr) 192 { 193 return msp_read(client, I2C_MSP_DSP, addr); 194 } 195 196 static int msp_write(struct i2c_client *client, int dev, int addr, int val) 197 { 198 int err; 199 u8 buffer[5]; 200 201 buffer[0] = dev; 202 buffer[1] = addr >> 8; 203 buffer[2] = addr & 0xff; 204 buffer[3] = val >> 8; 205 buffer[4] = val & 0xff; 206 207 dev_dbg_lvl(&client->dev, 3, msp_debug, "msp_write(0x%x, 0x%x, 0x%x)\n", 208 dev, addr, val); 209 for (err = 0; err < 3; err++) { 210 if (i2c_master_send(client, buffer, 5) == 5) 211 break; 212 dev_warn(&client->dev, "I/O error #%d (write 0x%02x/0x%02x)\n", err, 213 dev, addr); 214 schedule_timeout_interruptible(msecs_to_jiffies(10)); 215 } 216 if (err == 3) { 217 dev_warn(&client->dev, "resetting chip, sound will go off.\n"); 218 msp_reset(client); 219 return -1; 220 } 221 return 0; 222 } 223 224 int msp_write_dem(struct i2c_client *client, int addr, int val) 225 { 226 return msp_write(client, I2C_MSP_DEM, addr, val); 227 } 228 229 int msp_write_dsp(struct i2c_client *client, int addr, int val) 230 { 231 return msp_write(client, I2C_MSP_DSP, addr, val); 232 } 233 234 /* ----------------------------------------------------------------------- * 235 * bits 9 8 5 - SCART DSP input Select: 236 * 0 0 0 - SCART 1 to DSP input (reset position) 237 * 0 1 0 - MONO to DSP input 238 * 1 0 0 - SCART 2 to DSP input 239 * 1 1 1 - Mute DSP input 240 * 241 * bits 11 10 6 - SCART 1 Output Select: 242 * 0 0 0 - undefined (reset position) 243 * 0 1 0 - SCART 2 Input to SCART 1 Output (for devices with 2 SCARTS) 244 * 1 0 0 - MONO input to SCART 1 Output 245 * 1 1 0 - SCART 1 DA to SCART 1 Output 246 * 0 0 1 - SCART 2 DA to SCART 1 Output 247 * 0 1 1 - SCART 1 Input to SCART 1 Output 248 * 1 1 1 - Mute SCART 1 Output 249 * 250 * bits 13 12 7 - SCART 2 Output Select (for devices with 2 Output SCART): 251 * 0 0 0 - SCART 1 DA to SCART 2 Output (reset position) 252 * 0 1 0 - SCART 1 Input to SCART 2 Output 253 * 1 0 0 - MONO input to SCART 2 Output 254 * 0 0 1 - SCART 2 DA to SCART 2 Output 255 * 0 1 1 - SCART 2 Input to SCART 2 Output 256 * 1 1 0 - Mute SCART 2 Output 257 * 258 * Bits 4 to 0 should be zero. 259 * ----------------------------------------------------------------------- */ 260 261 static int scarts[3][9] = { 262 /* MASK IN1 IN2 IN3 IN4 IN1_DA IN2_DA MONO MUTE */ 263 /* SCART DSP Input select */ 264 { 0x0320, 0x0000, 0x0200, 0x0300, 0x0020, -1, -1, 0x0100, 0x0320 }, 265 /* SCART1 Output select */ 266 { 0x0c40, 0x0440, 0x0400, 0x0000, 0x0840, 0x0c00, 0x0040, 0x0800, 0x0c40 }, 267 /* SCART2 Output select */ 268 { 0x3080, 0x1000, 0x1080, 0x2080, 0x3080, 0x0000, 0x0080, 0x2000, 0x3000 }, 269 }; 270 271 static char *scart_names[] = { 272 "in1", "in2", "in3", "in4", "in1 da", "in2 da", "mono", "mute" 273 }; 274 275 void msp_set_scart(struct i2c_client *client, int in, int out) 276 { 277 struct msp_state *state = to_state(i2c_get_clientdata(client)); 278 279 state->in_scart = in; 280 281 if (in >= 0 && in <= 7 && out >= 0 && out <= 2) { 282 if (-1 == scarts[out][in + 1]) 283 return; 284 285 state->acb &= ~scarts[out][0]; 286 state->acb |= scarts[out][in + 1]; 287 } else 288 state->acb = 0xf60; /* Mute Input and SCART 1 Output */ 289 290 dev_dbg_lvl(&client->dev, 1, msp_debug, "scart switch: %s => %d (ACB=0x%04x)\n", 291 scart_names[in], out, state->acb); 292 msp_write_dsp(client, 0x13, state->acb); 293 294 /* Sets I2S speed 0 = 1.024 Mbps, 1 = 2.048 Mbps */ 295 if (state->has_i2s_conf) 296 msp_write_dem(client, 0x40, state->i2s_mode); 297 } 298 299 /* ------------------------------------------------------------------------ */ 300 301 static void msp_wake_thread(struct i2c_client *client) 302 { 303 struct msp_state *state = to_state(i2c_get_clientdata(client)); 304 305 if (NULL == state->kthread) 306 return; 307 state->watch_stereo = 0; 308 state->restart = 1; 309 wake_up_interruptible(&state->wq); 310 } 311 312 int msp_sleep(struct msp_state *state, int timeout) 313 { 314 DECLARE_WAITQUEUE(wait, current); 315 316 add_wait_queue(&state->wq, &wait); 317 if (!kthread_should_stop()) { 318 if (timeout < 0) { 319 set_current_state(TASK_INTERRUPTIBLE); 320 schedule(); 321 } else { 322 schedule_timeout_interruptible 323 (msecs_to_jiffies(timeout)); 324 } 325 } 326 327 remove_wait_queue(&state->wq, &wait); 328 try_to_freeze(); 329 return state->restart; 330 } 331 332 /* ------------------------------------------------------------------------ */ 333 334 static int msp_s_ctrl(struct v4l2_ctrl *ctrl) 335 { 336 struct msp_state *state = ctrl_to_state(ctrl); 337 struct i2c_client *client = v4l2_get_subdevdata(&state->sd); 338 int val = ctrl->val; 339 340 switch (ctrl->id) { 341 case V4L2_CID_AUDIO_VOLUME: { 342 /* audio volume cluster */ 343 int reallymuted = state->muted->val | state->scan_in_progress; 344 345 if (!reallymuted) 346 val = (val * 0x7f / 65535) << 8; 347 348 dev_dbg_lvl(&client->dev, 1, msp_debug, "mute=%s scanning=%s volume=%d\n", 349 state->muted->val ? "on" : "off", 350 state->scan_in_progress ? "yes" : "no", 351 state->volume->val); 352 353 msp_write_dsp(client, 0x0000, val); 354 msp_write_dsp(client, 0x0007, reallymuted ? 0x1 : (val | 0x1)); 355 if (state->has_scart2_out_volume) 356 msp_write_dsp(client, 0x0040, reallymuted ? 0x1 : (val | 0x1)); 357 if (state->has_headphones) 358 msp_write_dsp(client, 0x0006, val); 359 break; 360 } 361 362 case V4L2_CID_AUDIO_BASS: 363 val = ((val - 32768) * 0x60 / 65535) << 8; 364 msp_write_dsp(client, 0x0002, val); 365 if (state->has_headphones) 366 msp_write_dsp(client, 0x0031, val); 367 break; 368 369 case V4L2_CID_AUDIO_TREBLE: 370 val = ((val - 32768) * 0x60 / 65535) << 8; 371 msp_write_dsp(client, 0x0003, val); 372 if (state->has_headphones) 373 msp_write_dsp(client, 0x0032, val); 374 break; 375 376 case V4L2_CID_AUDIO_LOUDNESS: 377 val = val ? ((5 * 4) << 8) : 0; 378 msp_write_dsp(client, 0x0004, val); 379 if (state->has_headphones) 380 msp_write_dsp(client, 0x0033, val); 381 break; 382 383 case V4L2_CID_AUDIO_BALANCE: 384 val = (u8)((val / 256) - 128); 385 msp_write_dsp(client, 0x0001, val << 8); 386 if (state->has_headphones) 387 msp_write_dsp(client, 0x0030, val << 8); 388 break; 389 390 default: 391 return -EINVAL; 392 } 393 return 0; 394 } 395 396 void msp_update_volume(struct msp_state *state) 397 { 398 /* Force an update of the volume/mute cluster */ 399 v4l2_ctrl_lock(state->volume); 400 state->volume->val = state->volume->cur.val; 401 state->muted->val = state->muted->cur.val; 402 msp_s_ctrl(state->volume); 403 v4l2_ctrl_unlock(state->volume); 404 } 405 406 /* --- v4l2 ioctls --- */ 407 static int msp_s_radio(struct v4l2_subdev *sd) 408 { 409 struct msp_state *state = to_state(sd); 410 struct i2c_client *client = v4l2_get_subdevdata(sd); 411 412 if (state->radio) 413 return 0; 414 state->radio = 1; 415 dev_dbg_lvl(&client->dev, 1, msp_debug, "switching to radio mode\n"); 416 state->watch_stereo = 0; 417 switch (state->opmode) { 418 case OPMODE_MANUAL: 419 /* set msp3400 to FM radio mode */ 420 msp3400c_set_mode(client, MSP_MODE_FM_RADIO); 421 msp3400c_set_carrier(client, MSP_CARRIER(10.7), 422 MSP_CARRIER(10.7)); 423 msp_update_volume(state); 424 break; 425 case OPMODE_AUTODETECT: 426 case OPMODE_AUTOSELECT: 427 /* the thread will do for us */ 428 msp_wake_thread(client); 429 break; 430 } 431 return 0; 432 } 433 434 static int msp_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequency *freq) 435 { 436 struct i2c_client *client = v4l2_get_subdevdata(sd); 437 438 /* new channel -- kick audio carrier scan */ 439 msp_wake_thread(client); 440 return 0; 441 } 442 443 static int msp_querystd(struct v4l2_subdev *sd, v4l2_std_id *id) 444 { 445 struct msp_state *state = to_state(sd); 446 struct i2c_client *client = v4l2_get_subdevdata(sd); 447 448 *id &= state->detected_std; 449 450 dev_dbg_lvl(&client->dev, 2, msp_debug, 451 "detected standard: %s(0x%08Lx)\n", 452 msp_standard_std_name(state->std), state->detected_std); 453 454 return 0; 455 } 456 457 static int msp_s_std(struct v4l2_subdev *sd, v4l2_std_id id) 458 { 459 struct msp_state *state = to_state(sd); 460 struct i2c_client *client = v4l2_get_subdevdata(sd); 461 int update = state->radio || state->v4l2_std != id; 462 463 state->v4l2_std = id; 464 state->radio = 0; 465 if (update) 466 msp_wake_thread(client); 467 return 0; 468 } 469 470 static int msp_s_routing(struct v4l2_subdev *sd, 471 u32 input, u32 output, u32 config) 472 { 473 struct msp_state *state = to_state(sd); 474 struct i2c_client *client = v4l2_get_subdevdata(sd); 475 int tuner = (input >> 3) & 1; 476 int sc_in = input & 0x7; 477 int sc1_out = output & 0xf; 478 int sc2_out = (output >> 4) & 0xf; 479 u16 val, reg; 480 int i; 481 int extern_input = 1; 482 483 if (state->route_in == input && state->route_out == output) 484 return 0; 485 state->route_in = input; 486 state->route_out = output; 487 /* check if the tuner input is used */ 488 for (i = 0; i < 5; i++) { 489 if (((input >> (4 + i * 4)) & 0xf) == 0) 490 extern_input = 0; 491 } 492 state->mode = extern_input ? MSP_MODE_EXTERN : MSP_MODE_AM_DETECT; 493 state->rxsubchans = V4L2_TUNER_SUB_STEREO; 494 msp_set_scart(client, sc_in, 0); 495 msp_set_scart(client, sc1_out, 1); 496 msp_set_scart(client, sc2_out, 2); 497 msp_set_audmode(client); 498 reg = (state->opmode == OPMODE_AUTOSELECT) ? 0x30 : 0xbb; 499 val = msp_read_dem(client, reg); 500 msp_write_dem(client, reg, (val & ~0x100) | (tuner << 8)); 501 /* wake thread when a new input is chosen */ 502 msp_wake_thread(client); 503 return 0; 504 } 505 506 static int msp_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) 507 { 508 struct msp_state *state = to_state(sd); 509 struct i2c_client *client = v4l2_get_subdevdata(sd); 510 511 if (vt->type != V4L2_TUNER_ANALOG_TV) 512 return 0; 513 if (!state->radio) { 514 if (state->opmode == OPMODE_AUTOSELECT) 515 msp_detect_stereo(client); 516 vt->rxsubchans = state->rxsubchans; 517 } 518 vt->audmode = state->audmode; 519 vt->capability |= V4L2_TUNER_CAP_STEREO | 520 V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2; 521 return 0; 522 } 523 524 static int msp_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) 525 { 526 struct msp_state *state = to_state(sd); 527 struct i2c_client *client = v4l2_get_subdevdata(sd); 528 529 if (state->radio) /* TODO: add mono/stereo support for radio */ 530 return 0; 531 if (state->audmode == vt->audmode) 532 return 0; 533 state->audmode = vt->audmode; 534 /* only set audmode */ 535 msp_set_audmode(client); 536 return 0; 537 } 538 539 static int msp_s_i2s_clock_freq(struct v4l2_subdev *sd, u32 freq) 540 { 541 struct msp_state *state = to_state(sd); 542 struct i2c_client *client = v4l2_get_subdevdata(sd); 543 544 dev_dbg_lvl(&client->dev, 1, msp_debug, "Setting I2S speed to %d\n", freq); 545 546 switch (freq) { 547 case 1024000: 548 state->i2s_mode = 0; 549 break; 550 case 2048000: 551 state->i2s_mode = 1; 552 break; 553 default: 554 return -EINVAL; 555 } 556 return 0; 557 } 558 559 static int msp_log_status(struct v4l2_subdev *sd) 560 { 561 struct msp_state *state = to_state(sd); 562 struct i2c_client *client = v4l2_get_subdevdata(sd); 563 const char *p; 564 char prefix[V4L2_SUBDEV_NAME_SIZE + 20]; 565 566 if (state->opmode == OPMODE_AUTOSELECT) 567 msp_detect_stereo(client); 568 dev_info(&client->dev, "%s rev1 = 0x%04x rev2 = 0x%04x\n", 569 client->name, state->rev1, state->rev2); 570 snprintf(prefix, sizeof(prefix), "%s: Audio: ", sd->name); 571 v4l2_ctrl_handler_log_status(&state->hdl, prefix); 572 switch (state->mode) { 573 case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break; 574 case MSP_MODE_FM_RADIO: p = "FM Radio"; break; 575 case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break; 576 case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break; 577 case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break; 578 case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break; 579 case MSP_MODE_AM_NICAM: p = "NICAM/AM (L)"; break; 580 case MSP_MODE_BTSC: p = "BTSC"; break; 581 case MSP_MODE_EXTERN: p = "External input"; break; 582 default: p = "unknown"; break; 583 } 584 if (state->mode == MSP_MODE_EXTERN) { 585 dev_info(&client->dev, "Mode: %s\n", p); 586 } else if (state->opmode == OPMODE_MANUAL) { 587 dev_info(&client->dev, "Mode: %s (%s%s)\n", p, 588 (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", 589 (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); 590 } else { 591 if (state->opmode == OPMODE_AUTODETECT) 592 dev_info(&client->dev, "Mode: %s\n", p); 593 dev_info(&client->dev, "Standard: %s (%s%s)\n", 594 msp_standard_std_name(state->std), 595 (state->rxsubchans & V4L2_TUNER_SUB_STEREO) ? "stereo" : "mono", 596 (state->rxsubchans & V4L2_TUNER_SUB_LANG2) ? ", dual" : ""); 597 } 598 dev_info(&client->dev, "Audmode: 0x%04x\n", state->audmode); 599 dev_info(&client->dev, "Routing: 0x%08x (input) 0x%08x (output)\n", 600 state->route_in, state->route_out); 601 dev_info(&client->dev, "ACB: 0x%04x\n", state->acb); 602 return 0; 603 } 604 605 #ifdef CONFIG_PM_SLEEP 606 static int msp_suspend(struct device *dev) 607 { 608 struct i2c_client *client = to_i2c_client(dev); 609 dev_dbg_lvl(&client->dev, 1, msp_debug, "suspend\n"); 610 msp_reset(client); 611 return 0; 612 } 613 614 static int msp_resume(struct device *dev) 615 { 616 struct i2c_client *client = to_i2c_client(dev); 617 dev_dbg_lvl(&client->dev, 1, msp_debug, "resume\n"); 618 msp_wake_thread(client); 619 return 0; 620 } 621 #endif 622 623 /* ----------------------------------------------------------------------- */ 624 625 static const struct v4l2_ctrl_ops msp_ctrl_ops = { 626 .s_ctrl = msp_s_ctrl, 627 }; 628 629 static const struct v4l2_subdev_core_ops msp_core_ops = { 630 .log_status = msp_log_status, 631 }; 632 633 static const struct v4l2_subdev_video_ops msp_video_ops = { 634 .s_std = msp_s_std, 635 .querystd = msp_querystd, 636 }; 637 638 static const struct v4l2_subdev_tuner_ops msp_tuner_ops = { 639 .s_frequency = msp_s_frequency, 640 .g_tuner = msp_g_tuner, 641 .s_tuner = msp_s_tuner, 642 .s_radio = msp_s_radio, 643 }; 644 645 static const struct v4l2_subdev_audio_ops msp_audio_ops = { 646 .s_routing = msp_s_routing, 647 .s_i2s_clock_freq = msp_s_i2s_clock_freq, 648 }; 649 650 static const struct v4l2_subdev_ops msp_ops = { 651 .core = &msp_core_ops, 652 .video = &msp_video_ops, 653 .tuner = &msp_tuner_ops, 654 .audio = &msp_audio_ops, 655 }; 656 657 /* ----------------------------------------------------------------------- */ 658 659 660 static const char * const opmode_str[] = { 661 [OPMODE_MANUAL] = "manual", 662 [OPMODE_AUTODETECT] = "autodetect", 663 [OPMODE_AUTOSELECT] = "autodetect and autoselect", 664 }; 665 666 static int msp_probe(struct i2c_client *client) 667 { 668 const struct i2c_device_id *id = i2c_client_get_device_id(client); 669 struct msp_state *state; 670 struct v4l2_subdev *sd; 671 struct v4l2_ctrl_handler *hdl; 672 int (*thread_func)(void *data) = NULL; 673 int msp_hard; 674 int msp_family; 675 int msp_revision; 676 int msp_product, msp_prod_hi, msp_prod_lo; 677 int msp_rom; 678 #if defined(CONFIG_MEDIA_CONTROLLER) 679 int ret; 680 #endif 681 682 if (!id) 683 strscpy(client->name, "msp3400", sizeof(client->name)); 684 685 if (msp_reset(client) == -1) { 686 dev_dbg_lvl(&client->dev, 1, msp_debug, "msp3400 not found\n"); 687 return -ENODEV; 688 } 689 690 state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL); 691 if (!state) 692 return -ENOMEM; 693 694 sd = &state->sd; 695 v4l2_i2c_subdev_init(sd, client, &msp_ops); 696 697 #if defined(CONFIG_MEDIA_CONTROLLER) 698 state->pads[MSP3400_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK; 699 state->pads[MSP3400_PAD_IF_INPUT].sig_type = PAD_SIGNAL_AUDIO; 700 state->pads[MSP3400_PAD_OUT].flags = MEDIA_PAD_FL_SOURCE; 701 state->pads[MSP3400_PAD_OUT].sig_type = PAD_SIGNAL_AUDIO; 702 703 sd->entity.function = MEDIA_ENT_F_IF_AUD_DECODER; 704 705 ret = media_entity_pads_init(&sd->entity, 2, state->pads); 706 if (ret < 0) 707 return ret; 708 #endif 709 710 state->v4l2_std = V4L2_STD_NTSC; 711 state->detected_std = V4L2_STD_ALL; 712 state->audmode = V4L2_TUNER_MODE_STEREO; 713 state->input = -1; 714 state->i2s_mode = 0; 715 init_waitqueue_head(&state->wq); 716 /* These are the reset input/output positions */ 717 state->route_in = MSP_INPUT_DEFAULT; 718 state->route_out = MSP_OUTPUT_DEFAULT; 719 720 state->rev1 = msp_read_dsp(client, 0x1e); 721 if (state->rev1 != -1) 722 state->rev2 = msp_read_dsp(client, 0x1f); 723 dev_dbg_lvl(&client->dev, 1, msp_debug, "rev1=0x%04x, rev2=0x%04x\n", 724 state->rev1, state->rev2); 725 if (state->rev1 == -1 || (state->rev1 == 0 && state->rev2 == 0)) { 726 dev_dbg_lvl(&client->dev, 1, msp_debug, 727 "not an msp3400 (cannot read chip version)\n"); 728 return -ENODEV; 729 } 730 731 msp_family = ((state->rev1 >> 4) & 0x0f) + 3; 732 msp_product = (state->rev2 >> 8) & 0xff; 733 msp_prod_hi = msp_product / 10; 734 msp_prod_lo = msp_product % 10; 735 msp_revision = (state->rev1 & 0x0f) + '@'; 736 msp_hard = ((state->rev1 >> 8) & 0xff) + '@'; 737 msp_rom = state->rev2 & 0x1f; 738 /* Rev B=2, C=3, D=4, G=7 */ 739 state->ident = msp_family * 10000 + 4000 + msp_product * 10 + 740 msp_revision - '@'; 741 742 /* Has NICAM support: all mspx41x and mspx45x products have NICAM */ 743 state->has_nicam = 744 msp_prod_hi == 1 || msp_prod_hi == 5; 745 /* Has radio support: was added with revision G */ 746 state->has_radio = 747 msp_revision >= 'G'; 748 /* Has headphones output: not for stripped down products */ 749 state->has_headphones = 750 msp_prod_lo < 5; 751 /* Has scart2 input: not in stripped down products of the '3' family */ 752 state->has_scart2 = 753 msp_family >= 4 || msp_prod_lo < 7; 754 /* Has scart3 input: not in stripped down products of the '3' family */ 755 state->has_scart3 = 756 msp_family >= 4 || msp_prod_lo < 5; 757 /* Has scart4 input: not in pre D revisions, not in stripped D revs */ 758 state->has_scart4 = 759 msp_family >= 4 || (msp_revision >= 'D' && msp_prod_lo < 5); 760 /* Has scart2 output: not in stripped down products of 761 * the '3' family */ 762 state->has_scart2_out = 763 msp_family >= 4 || msp_prod_lo < 5; 764 /* Has scart2 a volume control? Not in pre-D revisions. */ 765 state->has_scart2_out_volume = 766 msp_revision > 'C' && state->has_scart2_out; 767 /* Has a configurable i2s out? */ 768 state->has_i2s_conf = 769 msp_revision >= 'G' && msp_prod_lo < 7; 770 /* Has subwoofer output: not in pre-D revs and not in stripped down 771 * products */ 772 state->has_subwoofer = 773 msp_revision >= 'D' && msp_prod_lo < 5; 774 /* Has soundprocessing (bass/treble/balance/loudness/equalizer): 775 * not in stripped down products */ 776 state->has_sound_processing = 777 msp_prod_lo < 7; 778 /* Has Virtual Dolby Surround: only in msp34x1 */ 779 state->has_virtual_dolby_surround = 780 msp_revision == 'G' && msp_prod_lo == 1; 781 /* Has Virtual Dolby Surround & Dolby Pro Logic: only in msp34x2 */ 782 state->has_dolby_pro_logic = 783 msp_revision == 'G' && msp_prod_lo == 2; 784 /* The msp343xG supports BTSC only and cannot do Automatic Standard 785 * Detection. */ 786 state->force_btsc = 787 msp_family == 3 && msp_revision == 'G' && msp_prod_hi == 3; 788 789 state->opmode = opmode; 790 if (state->opmode < OPMODE_MANUAL 791 || state->opmode > OPMODE_AUTOSELECT) { 792 /* MSP revision G and up have both autodetect and autoselect */ 793 if (msp_revision >= 'G') 794 state->opmode = OPMODE_AUTOSELECT; 795 /* MSP revision D and up have autodetect */ 796 else if (msp_revision >= 'D') 797 state->opmode = OPMODE_AUTODETECT; 798 else 799 state->opmode = OPMODE_MANUAL; 800 } 801 802 hdl = &state->hdl; 803 v4l2_ctrl_handler_init(hdl, 6); 804 if (state->has_sound_processing) { 805 v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, 806 V4L2_CID_AUDIO_BASS, 0, 65535, 65535 / 100, 32768); 807 v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, 808 V4L2_CID_AUDIO_TREBLE, 0, 65535, 65535 / 100, 32768); 809 v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, 810 V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 0); 811 } 812 state->volume = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, 813 V4L2_CID_AUDIO_VOLUME, 0, 65535, 65535 / 100, 58880); 814 v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, 815 V4L2_CID_AUDIO_BALANCE, 0, 65535, 65535 / 100, 32768); 816 state->muted = v4l2_ctrl_new_std(hdl, &msp_ctrl_ops, 817 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); 818 sd->ctrl_handler = hdl; 819 if (hdl->error) { 820 int err = hdl->error; 821 822 v4l2_ctrl_handler_free(hdl); 823 return err; 824 } 825 826 v4l2_ctrl_cluster(2, &state->volume); 827 v4l2_ctrl_handler_setup(hdl); 828 829 dev_info(&client->dev, 830 "MSP%d4%02d%c-%c%d found on %s: supports %s%s%s, mode is %s\n", 831 msp_family, msp_product, 832 msp_revision, msp_hard, msp_rom, 833 client->adapter->name, 834 (state->has_nicam) ? "nicam" : "", 835 (state->has_nicam && state->has_radio) ? " and " : "", 836 (state->has_radio) ? "radio" : "", 837 opmode_str[state->opmode]); 838 839 /* version-specific initialization */ 840 switch (state->opmode) { 841 case OPMODE_MANUAL: 842 thread_func = msp3400c_thread; 843 break; 844 case OPMODE_AUTODETECT: 845 thread_func = msp3410d_thread; 846 break; 847 case OPMODE_AUTOSELECT: 848 thread_func = msp34xxg_thread; 849 break; 850 } 851 852 /* startup control thread if needed */ 853 if (thread_func) { 854 state->kthread = kthread_run(thread_func, client, "msp34xx"); 855 856 if (IS_ERR(state->kthread)) 857 dev_warn(&client->dev, "kernel_thread() failed\n"); 858 msp_wake_thread(client); 859 } 860 return 0; 861 } 862 863 static void msp_remove(struct i2c_client *client) 864 { 865 struct msp_state *state = to_state(i2c_get_clientdata(client)); 866 867 v4l2_device_unregister_subdev(&state->sd); 868 /* shutdown control thread */ 869 if (state->kthread) { 870 state->restart = 1; 871 kthread_stop(state->kthread); 872 } 873 msp_reset(client); 874 875 v4l2_ctrl_handler_free(&state->hdl); 876 } 877 878 /* ----------------------------------------------------------------------- */ 879 880 static const struct dev_pm_ops msp3400_pm_ops = { 881 SET_SYSTEM_SLEEP_PM_OPS(msp_suspend, msp_resume) 882 }; 883 884 static const struct i2c_device_id msp_id[] = { 885 { "msp3400", 0 }, 886 { } 887 }; 888 MODULE_DEVICE_TABLE(i2c, msp_id); 889 890 static struct i2c_driver msp_driver = { 891 .driver = { 892 .name = "msp3400", 893 .pm = &msp3400_pm_ops, 894 }, 895 .probe_new = msp_probe, 896 .remove = msp_remove, 897 .id_table = msp_id, 898 }; 899 900 module_i2c_driver(msp_driver); 901