xref: /openbmc/linux/drivers/media/i2c/ml86v7667.c (revision 3bf90eca)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * OKI Semiconductor ML86V7667 video decoder driver
4  *
5  * Author: Vladimir Barinov <source@cogentembedded.com>
6  * Copyright (C) 2013 Cogent Embedded, Inc.
7  * Copyright (C) 2013 Renesas Solutions Corp.
8  */
9 
10 #include <linux/init.h>
11 #include <linux/module.h>
12 #include <linux/i2c.h>
13 #include <linux/slab.h>
14 #include <linux/videodev2.h>
15 #include <media/v4l2-subdev.h>
16 #include <media/v4l2-device.h>
17 #include <media/v4l2-ioctl.h>
18 #include <media/v4l2-ctrls.h>
19 
20 #define DRV_NAME "ml86v7667"
21 
22 /* Subaddresses */
23 #define MRA_REG			0x00 /* Mode Register A */
24 #define MRC_REG			0x02 /* Mode Register C */
25 #define LUMC_REG		0x0C /* Luminance Control */
26 #define CLC_REG			0x10 /* Contrast level control */
27 #define SSEPL_REG		0x11 /* Sync separation level */
28 #define CHRCA_REG		0x12 /* Chrominance Control A */
29 #define ACCC_REG		0x14 /* ACC Loop filter & Chrominance control */
30 #define ACCRC_REG		0x15 /* ACC Reference level control */
31 #define HUE_REG			0x16 /* Hue control */
32 #define ADC2_REG		0x1F /* ADC Register 2 */
33 #define PLLR1_REG		0x20 /* PLL Register 1 */
34 #define STATUS_REG		0x2C /* STATUS Register */
35 
36 /* Mode Register A register bits */
37 #define MRA_OUTPUT_MODE_MASK	(3 << 6)
38 #define MRA_ITUR_BT601		(1 << 6)
39 #define MRA_ITUR_BT656		(0 << 6)
40 #define MRA_INPUT_MODE_MASK	(7 << 3)
41 #define MRA_PAL_BT601		(4 << 3)
42 #define MRA_NTSC_BT601		(0 << 3)
43 #define MRA_REGISTER_MODE	(1 << 0)
44 
45 /* Mode Register C register bits */
46 #define MRC_AUTOSELECT		(1 << 7)
47 
48 /* Luminance Control register bits */
49 #define LUMC_ONOFF_SHIFT	7
50 #define LUMC_ONOFF_MASK		(1 << 7)
51 
52 /* Contrast level control register bits */
53 #define CLC_CONTRAST_ONOFF	(1 << 7)
54 #define CLC_CONTRAST_MASK	0x0F
55 
56 /* Sync separation level register bits */
57 #define SSEPL_LUMINANCE_ONOFF	(1 << 7)
58 #define SSEPL_LUMINANCE_MASK	0x7F
59 
60 /* Chrominance Control A register bits */
61 #define CHRCA_MODE_SHIFT	6
62 #define CHRCA_MODE_MASK		(1 << 6)
63 
64 /* ACC Loop filter & Chrominance control register bits */
65 #define ACCC_CHROMA_CR_SHIFT	3
66 #define ACCC_CHROMA_CR_MASK	(7 << 3)
67 #define ACCC_CHROMA_CB_SHIFT	0
68 #define ACCC_CHROMA_CB_MASK	(7 << 0)
69 
70 /* ACC Reference level control register bits */
71 #define ACCRC_CHROMA_MASK	0xfc
72 #define ACCRC_CHROMA_SHIFT	2
73 
74 /* ADC Register 2 register bits */
75 #define ADC2_CLAMP_VOLTAGE_MASK	(7 << 1)
76 #define ADC2_CLAMP_VOLTAGE(n)	((n & 7) << 1)
77 
78 /* PLL Register 1 register bits */
79 #define PLLR1_FIXED_CLOCK	(1 << 7)
80 
81 /* STATUS Register register bits */
82 #define STATUS_HLOCK_DETECT	(1 << 3)
83 #define STATUS_NTSCPAL		(1 << 2)
84 
85 struct ml86v7667_priv {
86 	struct v4l2_subdev		sd;
87 	struct v4l2_ctrl_handler	hdl;
88 	v4l2_std_id			std;
89 };
90 
91 static inline struct ml86v7667_priv *to_ml86v7667(struct v4l2_subdev *subdev)
92 {
93 	return container_of(subdev, struct ml86v7667_priv, sd);
94 }
95 
96 static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
97 {
98 	return &container_of(ctrl->handler, struct ml86v7667_priv, hdl)->sd;
99 }
100 
101 static int ml86v7667_mask_set(struct i2c_client *client, const u8 reg,
102 			      const u8 mask, const u8 data)
103 {
104 	int val = i2c_smbus_read_byte_data(client, reg);
105 	if (val < 0)
106 		return val;
107 
108 	val = (val & ~mask) | (data & mask);
109 	return i2c_smbus_write_byte_data(client, reg, val);
110 }
111 
112 static int ml86v7667_s_ctrl(struct v4l2_ctrl *ctrl)
113 {
114 	struct v4l2_subdev *sd = to_sd(ctrl);
115 	struct i2c_client *client = v4l2_get_subdevdata(sd);
116 	int ret = -EINVAL;
117 
118 	switch (ctrl->id) {
119 	case V4L2_CID_BRIGHTNESS:
120 		ret = ml86v7667_mask_set(client, SSEPL_REG,
121 					 SSEPL_LUMINANCE_MASK, ctrl->val);
122 		break;
123 	case V4L2_CID_CONTRAST:
124 		ret = ml86v7667_mask_set(client, CLC_REG,
125 					 CLC_CONTRAST_MASK, ctrl->val);
126 		break;
127 	case V4L2_CID_CHROMA_GAIN:
128 		ret = ml86v7667_mask_set(client, ACCRC_REG, ACCRC_CHROMA_MASK,
129 					 ctrl->val << ACCRC_CHROMA_SHIFT);
130 		break;
131 	case V4L2_CID_HUE:
132 		ret = ml86v7667_mask_set(client, HUE_REG, ~0, ctrl->val);
133 		break;
134 	case V4L2_CID_RED_BALANCE:
135 		ret = ml86v7667_mask_set(client, ACCC_REG,
136 					 ACCC_CHROMA_CR_MASK,
137 					 ctrl->val << ACCC_CHROMA_CR_SHIFT);
138 		break;
139 	case V4L2_CID_BLUE_BALANCE:
140 		ret = ml86v7667_mask_set(client, ACCC_REG,
141 					 ACCC_CHROMA_CB_MASK,
142 					 ctrl->val << ACCC_CHROMA_CB_SHIFT);
143 		break;
144 	case V4L2_CID_SHARPNESS:
145 		ret = ml86v7667_mask_set(client, LUMC_REG,
146 					 LUMC_ONOFF_MASK,
147 					 ctrl->val << LUMC_ONOFF_SHIFT);
148 		break;
149 	case V4L2_CID_COLOR_KILLER:
150 		ret = ml86v7667_mask_set(client, CHRCA_REG,
151 					 CHRCA_MODE_MASK,
152 					 ctrl->val << CHRCA_MODE_SHIFT);
153 		break;
154 	}
155 
156 	return ret;
157 }
158 
159 static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
160 {
161 	struct i2c_client *client = v4l2_get_subdevdata(sd);
162 	int status;
163 
164 	status = i2c_smbus_read_byte_data(client, STATUS_REG);
165 	if (status < 0)
166 		return status;
167 
168 	if (status & STATUS_HLOCK_DETECT)
169 		*std &= status & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
170 	else
171 		*std = V4L2_STD_UNKNOWN;
172 
173 	return 0;
174 }
175 
176 static int ml86v7667_g_input_status(struct v4l2_subdev *sd, u32 *status)
177 {
178 	struct i2c_client *client = v4l2_get_subdevdata(sd);
179 	int status_reg;
180 
181 	status_reg = i2c_smbus_read_byte_data(client, STATUS_REG);
182 	if (status_reg < 0)
183 		return status_reg;
184 
185 	*status = status_reg & STATUS_HLOCK_DETECT ? 0 : V4L2_IN_ST_NO_SIGNAL;
186 
187 	return 0;
188 }
189 
190 static int ml86v7667_enum_mbus_code(struct v4l2_subdev *sd,
191 		struct v4l2_subdev_state *sd_state,
192 		struct v4l2_subdev_mbus_code_enum *code)
193 {
194 	if (code->pad || code->index > 0)
195 		return -EINVAL;
196 
197 	code->code = MEDIA_BUS_FMT_YUYV8_2X8;
198 
199 	return 0;
200 }
201 
202 static int ml86v7667_fill_fmt(struct v4l2_subdev *sd,
203 		struct v4l2_subdev_state *sd_state,
204 		struct v4l2_subdev_format *format)
205 {
206 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
207 	struct v4l2_mbus_framefmt *fmt = &format->format;
208 
209 	if (format->pad)
210 		return -EINVAL;
211 
212 	fmt->code = MEDIA_BUS_FMT_YUYV8_2X8;
213 	fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
214 	/* The top field is always transferred first by the chip */
215 	fmt->field = V4L2_FIELD_INTERLACED_TB;
216 	fmt->width = 720;
217 	fmt->height = priv->std & V4L2_STD_525_60 ? 480 : 576;
218 
219 	return 0;
220 }
221 
222 static int ml86v7667_get_mbus_config(struct v4l2_subdev *sd,
223 				     unsigned int pad,
224 				     struct v4l2_mbus_config *cfg)
225 {
226 	cfg->type = V4L2_MBUS_BT656;
227 	cfg->bus.parallel.flags = V4L2_MBUS_MASTER |
228 				  V4L2_MBUS_PCLK_SAMPLE_RISING |
229 				  V4L2_MBUS_DATA_ACTIVE_HIGH;
230 
231 	return 0;
232 }
233 
234 static int ml86v7667_g_std(struct v4l2_subdev *sd, v4l2_std_id *std)
235 {
236 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
237 
238 	*std = priv->std;
239 
240 	return 0;
241 }
242 
243 static int ml86v7667_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
244 {
245 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
246 	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
247 	int ret;
248 	u8 mode;
249 
250 	/* PAL/NTSC ITU-R BT.601 input mode */
251 	mode = std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
252 	ret = ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, mode);
253 	if (ret < 0)
254 		return ret;
255 
256 	priv->std = std;
257 
258 	return 0;
259 }
260 
261 #ifdef CONFIG_VIDEO_ADV_DEBUG
262 static int ml86v7667_g_register(struct v4l2_subdev *sd,
263 				struct v4l2_dbg_register *reg)
264 {
265 	struct i2c_client *client = v4l2_get_subdevdata(sd);
266 	int ret;
267 
268 	ret = i2c_smbus_read_byte_data(client, (u8)reg->reg);
269 	if (ret < 0)
270 		return ret;
271 
272 	reg->val = ret;
273 	reg->size = sizeof(u8);
274 
275 	return 0;
276 }
277 
278 static int ml86v7667_s_register(struct v4l2_subdev *sd,
279 				const struct v4l2_dbg_register *reg)
280 {
281 	struct i2c_client *client = v4l2_get_subdevdata(sd);
282 
283 	return i2c_smbus_write_byte_data(client, (u8)reg->reg, (u8)reg->val);
284 }
285 #endif
286 
287 static const struct v4l2_ctrl_ops ml86v7667_ctrl_ops = {
288 	.s_ctrl = ml86v7667_s_ctrl,
289 };
290 
291 static const struct v4l2_subdev_video_ops ml86v7667_subdev_video_ops = {
292 	.g_std = ml86v7667_g_std,
293 	.s_std = ml86v7667_s_std,
294 	.querystd = ml86v7667_querystd,
295 	.g_input_status = ml86v7667_g_input_status,
296 };
297 
298 static const struct v4l2_subdev_pad_ops ml86v7667_subdev_pad_ops = {
299 	.enum_mbus_code = ml86v7667_enum_mbus_code,
300 	.get_fmt = ml86v7667_fill_fmt,
301 	.set_fmt = ml86v7667_fill_fmt,
302 	.get_mbus_config = ml86v7667_get_mbus_config,
303 };
304 
305 static const struct v4l2_subdev_core_ops ml86v7667_subdev_core_ops = {
306 #ifdef CONFIG_VIDEO_ADV_DEBUG
307 	.g_register = ml86v7667_g_register,
308 	.s_register = ml86v7667_s_register,
309 #endif
310 };
311 
312 static const struct v4l2_subdev_ops ml86v7667_subdev_ops = {
313 	.core = &ml86v7667_subdev_core_ops,
314 	.video = &ml86v7667_subdev_video_ops,
315 	.pad = &ml86v7667_subdev_pad_ops,
316 };
317 
318 static int ml86v7667_init(struct ml86v7667_priv *priv)
319 {
320 	struct i2c_client *client = v4l2_get_subdevdata(&priv->sd);
321 	int val;
322 	int ret;
323 
324 	/* BT.656-4 output mode, register mode */
325 	ret = ml86v7667_mask_set(client, MRA_REG,
326 				 MRA_OUTPUT_MODE_MASK | MRA_REGISTER_MODE,
327 				 MRA_ITUR_BT656 | MRA_REGISTER_MODE);
328 
329 	/* PLL circuit fixed clock, 32MHz */
330 	ret |= ml86v7667_mask_set(client, PLLR1_REG, PLLR1_FIXED_CLOCK,
331 				  PLLR1_FIXED_CLOCK);
332 
333 	/* ADC2 clamping voltage maximum  */
334 	ret |= ml86v7667_mask_set(client, ADC2_REG, ADC2_CLAMP_VOLTAGE_MASK,
335 				  ADC2_CLAMP_VOLTAGE(7));
336 
337 	/* enable luminance function */
338 	ret |= ml86v7667_mask_set(client, SSEPL_REG, SSEPL_LUMINANCE_ONOFF,
339 				  SSEPL_LUMINANCE_ONOFF);
340 
341 	/* enable contrast function */
342 	ret |= ml86v7667_mask_set(client, CLC_REG, CLC_CONTRAST_ONOFF, 0);
343 
344 	/*
345 	 * PAL/NTSC autodetection is enabled after reset,
346 	 * set the autodetected std in manual std mode and
347 	 * disable autodetection
348 	 */
349 	val = i2c_smbus_read_byte_data(client, STATUS_REG);
350 	if (val < 0)
351 		return val;
352 
353 	priv->std = val & STATUS_NTSCPAL ? V4L2_STD_625_50 : V4L2_STD_525_60;
354 	ret |= ml86v7667_mask_set(client, MRC_REG, MRC_AUTOSELECT, 0);
355 
356 	val = priv->std & V4L2_STD_525_60 ? MRA_NTSC_BT601 : MRA_PAL_BT601;
357 	ret |= ml86v7667_mask_set(client, MRA_REG, MRA_INPUT_MODE_MASK, val);
358 
359 	return ret;
360 }
361 
362 static int ml86v7667_probe(struct i2c_client *client)
363 {
364 	struct ml86v7667_priv *priv;
365 	int ret;
366 
367 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
368 		return -EIO;
369 
370 	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
371 	if (!priv)
372 		return -ENOMEM;
373 
374 	v4l2_i2c_subdev_init(&priv->sd, client, &ml86v7667_subdev_ops);
375 
376 	v4l2_ctrl_handler_init(&priv->hdl, 8);
377 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
378 			  V4L2_CID_BRIGHTNESS, -64, 63, 1, 0);
379 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
380 			  V4L2_CID_CONTRAST, -8, 7, 1, 0);
381 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
382 			  V4L2_CID_CHROMA_GAIN, -32, 31, 1, 0);
383 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
384 			  V4L2_CID_HUE, -128, 127, 1, 0);
385 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
386 			  V4L2_CID_RED_BALANCE, -4, 3, 1, 0);
387 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
388 			  V4L2_CID_BLUE_BALANCE, -4, 3, 1, 0);
389 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
390 			  V4L2_CID_SHARPNESS, 0, 1, 1, 0);
391 	v4l2_ctrl_new_std(&priv->hdl, &ml86v7667_ctrl_ops,
392 			  V4L2_CID_COLOR_KILLER, 0, 1, 1, 0);
393 	priv->sd.ctrl_handler = &priv->hdl;
394 
395 	ret = priv->hdl.error;
396 	if (ret)
397 		goto cleanup;
398 
399 	v4l2_ctrl_handler_setup(&priv->hdl);
400 
401 	ret = ml86v7667_init(priv);
402 	if (ret)
403 		goto cleanup;
404 
405 	v4l_info(client, "chip found @ 0x%02x (%s)\n",
406 		 client->addr, client->adapter->name);
407 	return 0;
408 
409 cleanup:
410 	v4l2_ctrl_handler_free(&priv->hdl);
411 	v4l2_device_unregister_subdev(&priv->sd);
412 	v4l_err(client, "failed to probe @ 0x%02x (%s)\n",
413 		client->addr, client->adapter->name);
414 	return ret;
415 }
416 
417 static void ml86v7667_remove(struct i2c_client *client)
418 {
419 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
420 	struct ml86v7667_priv *priv = to_ml86v7667(sd);
421 
422 	v4l2_ctrl_handler_free(&priv->hdl);
423 	v4l2_device_unregister_subdev(&priv->sd);
424 }
425 
426 static const struct i2c_device_id ml86v7667_id[] = {
427 	{DRV_NAME, 0},
428 	{},
429 };
430 MODULE_DEVICE_TABLE(i2c, ml86v7667_id);
431 
432 static struct i2c_driver ml86v7667_i2c_driver = {
433 	.driver = {
434 		.name	= DRV_NAME,
435 	},
436 	.probe_new	= ml86v7667_probe,
437 	.remove		= ml86v7667_remove,
438 	.id_table	= ml86v7667_id,
439 };
440 
441 module_i2c_driver(ml86v7667_i2c_driver);
442 
443 MODULE_DESCRIPTION("OKI Semiconductor ML86V7667 video decoder driver");
444 MODULE_AUTHOR("Vladimir Barinov");
445 MODULE_LICENSE("GPL");
446