1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Maxim MAX9286 GMSL Deserializer Driver 4 * 5 * Copyright (C) 2017-2019 Jacopo Mondi 6 * Copyright (C) 2017-2019 Kieran Bingham 7 * Copyright (C) 2017-2019 Laurent Pinchart 8 * Copyright (C) 2017-2019 Niklas Söderlund 9 * Copyright (C) 2016 Renesas Electronics Corporation 10 * Copyright (C) 2015 Cogent Embedded, Inc. 11 */ 12 13 #include <linux/delay.h> 14 #include <linux/device.h> 15 #include <linux/fwnode.h> 16 #include <linux/gpio/consumer.h> 17 #include <linux/gpio/driver.h> 18 #include <linux/gpio/machine.h> 19 #include <linux/i2c.h> 20 #include <linux/i2c-mux.h> 21 #include <linux/module.h> 22 #include <linux/mutex.h> 23 #include <linux/of_graph.h> 24 #include <linux/regulator/consumer.h> 25 #include <linux/slab.h> 26 27 #include <media/v4l2-async.h> 28 #include <media/v4l2-ctrls.h> 29 #include <media/v4l2-device.h> 30 #include <media/v4l2-fwnode.h> 31 #include <media/v4l2-subdev.h> 32 33 /* Register 0x00 */ 34 #define MAX9286_MSTLINKSEL_AUTO (7 << 5) 35 #define MAX9286_MSTLINKSEL(n) ((n) << 5) 36 #define MAX9286_EN_VS_GEN BIT(4) 37 #define MAX9286_LINKEN(n) (1 << (n)) 38 /* Register 0x01 */ 39 #define MAX9286_FSYNCMODE_ECU (3 << 6) 40 #define MAX9286_FSYNCMODE_EXT (2 << 6) 41 #define MAX9286_FSYNCMODE_INT_OUT (1 << 6) 42 #define MAX9286_FSYNCMODE_INT_HIZ (0 << 6) 43 #define MAX9286_GPIEN BIT(5) 44 #define MAX9286_ENLMO_RSTFSYNC BIT(2) 45 #define MAX9286_FSYNCMETH_AUTO (2 << 0) 46 #define MAX9286_FSYNCMETH_SEMI_AUTO (1 << 0) 47 #define MAX9286_FSYNCMETH_MANUAL (0 << 0) 48 #define MAX9286_REG_FSYNC_PERIOD_L 0x06 49 #define MAX9286_REG_FSYNC_PERIOD_M 0x07 50 #define MAX9286_REG_FSYNC_PERIOD_H 0x08 51 /* Register 0x0a */ 52 #define MAX9286_FWDCCEN(n) (1 << ((n) + 4)) 53 #define MAX9286_REVCCEN(n) (1 << (n)) 54 /* Register 0x0c */ 55 #define MAX9286_HVEN BIT(7) 56 #define MAX9286_EDC_6BIT_HAMMING (2 << 5) 57 #define MAX9286_EDC_6BIT_CRC (1 << 5) 58 #define MAX9286_EDC_1BIT_PARITY (0 << 5) 59 #define MAX9286_DESEL BIT(4) 60 #define MAX9286_INVVS BIT(3) 61 #define MAX9286_INVHS BIT(2) 62 #define MAX9286_HVSRC_D0 (2 << 0) 63 #define MAX9286_HVSRC_D14 (1 << 0) 64 #define MAX9286_HVSRC_D18 (0 << 0) 65 /* Register 0x0f */ 66 #define MAX9286_0X0F_RESERVED BIT(3) 67 /* Register 0x12 */ 68 #define MAX9286_CSILANECNT(n) (((n) - 1) << 6) 69 #define MAX9286_CSIDBL BIT(5) 70 #define MAX9286_DBL BIT(4) 71 #define MAX9286_DATATYPE_USER_8BIT (11 << 0) 72 #define MAX9286_DATATYPE_USER_YUV_12BIT (10 << 0) 73 #define MAX9286_DATATYPE_USER_24BIT (9 << 0) 74 #define MAX9286_DATATYPE_RAW14 (8 << 0) 75 #define MAX9286_DATATYPE_RAW12 (7 << 0) 76 #define MAX9286_DATATYPE_RAW10 (6 << 0) 77 #define MAX9286_DATATYPE_RAW8 (5 << 0) 78 #define MAX9286_DATATYPE_YUV422_10BIT (4 << 0) 79 #define MAX9286_DATATYPE_YUV422_8BIT (3 << 0) 80 #define MAX9286_DATATYPE_RGB555 (2 << 0) 81 #define MAX9286_DATATYPE_RGB565 (1 << 0) 82 #define MAX9286_DATATYPE_RGB888 (0 << 0) 83 /* Register 0x15 */ 84 #define MAX9286_CSI_IMAGE_TYP BIT(7) 85 #define MAX9286_VC(n) ((n) << 5) 86 #define MAX9286_VCTYPE BIT(4) 87 #define MAX9286_CSIOUTEN BIT(3) 88 #define MAX9286_SWP_ENDIAN BIT(2) 89 #define MAX9286_EN_CCBSYB_CLK_STR BIT(1) 90 #define MAX9286_EN_GPI_CCBSYB BIT(0) 91 /* Register 0x1b */ 92 #define MAX9286_SWITCHIN(n) (1 << ((n) + 4)) 93 #define MAX9286_ENEQ(n) (1 << (n)) 94 /* Register 0x1c */ 95 #define MAX9286_HIGHIMM(n) BIT((n) + 4) 96 #define MAX9286_I2CSEL BIT(2) 97 #define MAX9286_HIBW BIT(1) 98 #define MAX9286_BWS BIT(0) 99 /* Register 0x27 */ 100 #define MAX9286_LOCKED BIT(7) 101 /* Register 0x31 */ 102 #define MAX9286_FSYNC_LOCKED BIT(6) 103 /* Register 0x34 */ 104 #define MAX9286_I2CLOCACK BIT(7) 105 #define MAX9286_I2CSLVSH_1046NS_469NS (3 << 5) 106 #define MAX9286_I2CSLVSH_938NS_352NS (2 << 5) 107 #define MAX9286_I2CSLVSH_469NS_234NS (1 << 5) 108 #define MAX9286_I2CSLVSH_352NS_117NS (0 << 5) 109 #define MAX9286_I2CMSTBT_837KBPS (7 << 2) 110 #define MAX9286_I2CMSTBT_533KBPS (6 << 2) 111 #define MAX9286_I2CMSTBT_339KBPS (5 << 2) 112 #define MAX9286_I2CMSTBT_173KBPS (4 << 2) 113 #define MAX9286_I2CMSTBT_105KBPS (3 << 2) 114 #define MAX9286_I2CMSTBT_84KBPS (2 << 2) 115 #define MAX9286_I2CMSTBT_28KBPS (1 << 2) 116 #define MAX9286_I2CMSTBT_8KBPS (0 << 2) 117 #define MAX9286_I2CSLVTO_NONE (3 << 0) 118 #define MAX9286_I2CSLVTO_1024US (2 << 0) 119 #define MAX9286_I2CSLVTO_256US (1 << 0) 120 #define MAX9286_I2CSLVTO_64US (0 << 0) 121 /* Register 0x3b */ 122 #define MAX9286_REV_TRF(n) ((n) << 4) 123 #define MAX9286_REV_AMP(n) ((((n) - 30) / 10) << 1) /* in mV */ 124 #define MAX9286_REV_AMP_X BIT(0) 125 #define MAX9286_REV_AMP_HIGH 170 126 /* Register 0x3f */ 127 #define MAX9286_EN_REV_CFG BIT(6) 128 #define MAX9286_REV_FLEN(n) ((n) - 20) 129 /* Register 0x49 */ 130 #define MAX9286_VIDEO_DETECT_MASK 0x0f 131 /* Register 0x69 */ 132 #define MAX9286_LFLTBMONMASKED BIT(7) 133 #define MAX9286_LOCKMONMASKED BIT(6) 134 #define MAX9286_AUTOCOMBACKEN BIT(5) 135 #define MAX9286_AUTOMASKEN BIT(4) 136 #define MAX9286_MASKLINK(n) ((n) << 0) 137 138 /* 139 * The sink and source pads are created to match the OF graph port numbers so 140 * that their indexes can be used interchangeably. 141 */ 142 #define MAX9286_NUM_GMSL 4 143 #define MAX9286_N_SINKS 4 144 #define MAX9286_N_PADS 5 145 #define MAX9286_SRC_PAD 4 146 147 struct max9286_format_info { 148 u32 code; 149 u8 datatype; 150 }; 151 152 struct max9286_i2c_speed { 153 u32 rate; 154 u8 mstbt; 155 }; 156 157 struct max9286_source { 158 struct v4l2_subdev *sd; 159 struct fwnode_handle *fwnode; 160 struct regulator *regulator; 161 }; 162 163 struct max9286_asd { 164 struct v4l2_async_subdev base; 165 struct max9286_source *source; 166 }; 167 168 static inline struct max9286_asd *to_max9286_asd(struct v4l2_async_subdev *asd) 169 { 170 return container_of(asd, struct max9286_asd, base); 171 } 172 173 struct max9286_priv { 174 struct i2c_client *client; 175 struct gpio_desc *gpiod_pwdn; 176 struct v4l2_subdev sd; 177 struct media_pad pads[MAX9286_N_PADS]; 178 struct regulator *regulator; 179 180 struct gpio_chip gpio; 181 u8 gpio_state; 182 183 struct i2c_mux_core *mux; 184 unsigned int mux_channel; 185 bool mux_open; 186 187 /* The initial reverse control channel amplitude. */ 188 u32 init_rev_chan_mv; 189 u32 rev_chan_mv; 190 u8 i2c_mstbt; 191 u32 bus_width; 192 193 bool use_gpio_poc; 194 u32 gpio_poc[2]; 195 196 struct v4l2_ctrl_handler ctrls; 197 struct v4l2_ctrl *pixelrate_ctrl; 198 unsigned int pixelrate; 199 200 struct v4l2_mbus_framefmt fmt[MAX9286_N_SINKS]; 201 struct v4l2_fract interval; 202 203 /* Protects controls and fmt structures */ 204 struct mutex mutex; 205 206 unsigned int nsources; 207 unsigned int source_mask; 208 unsigned int route_mask; 209 unsigned int bound_sources; 210 unsigned int csi2_data_lanes; 211 struct max9286_source sources[MAX9286_NUM_GMSL]; 212 struct v4l2_async_notifier notifier; 213 }; 214 215 static struct max9286_source *next_source(struct max9286_priv *priv, 216 struct max9286_source *source) 217 { 218 if (!source) 219 source = &priv->sources[0]; 220 else 221 source++; 222 223 for (; source < &priv->sources[MAX9286_NUM_GMSL]; source++) { 224 if (source->fwnode) 225 return source; 226 } 227 228 return NULL; 229 } 230 231 #define for_each_source(priv, source) \ 232 for ((source) = NULL; ((source) = next_source((priv), (source))); ) 233 234 #define to_index(priv, source) ((source) - &(priv)->sources[0]) 235 236 static inline struct max9286_priv *sd_to_max9286(struct v4l2_subdev *sd) 237 { 238 return container_of(sd, struct max9286_priv, sd); 239 } 240 241 static const struct max9286_format_info max9286_formats[] = { 242 { 243 .code = MEDIA_BUS_FMT_UYVY8_1X16, 244 .datatype = MAX9286_DATATYPE_YUV422_8BIT, 245 }, { 246 .code = MEDIA_BUS_FMT_VYUY8_1X16, 247 .datatype = MAX9286_DATATYPE_YUV422_8BIT, 248 }, { 249 .code = MEDIA_BUS_FMT_YUYV8_1X16, 250 .datatype = MAX9286_DATATYPE_YUV422_8BIT, 251 }, { 252 .code = MEDIA_BUS_FMT_YVYU8_1X16, 253 .datatype = MAX9286_DATATYPE_YUV422_8BIT, 254 }, { 255 .code = MEDIA_BUS_FMT_SBGGR12_1X12, 256 .datatype = MAX9286_DATATYPE_RAW12, 257 }, { 258 .code = MEDIA_BUS_FMT_SGBRG12_1X12, 259 .datatype = MAX9286_DATATYPE_RAW12, 260 }, { 261 .code = MEDIA_BUS_FMT_SGRBG12_1X12, 262 .datatype = MAX9286_DATATYPE_RAW12, 263 }, { 264 .code = MEDIA_BUS_FMT_SRGGB12_1X12, 265 .datatype = MAX9286_DATATYPE_RAW12, 266 }, 267 }; 268 269 static const struct max9286_i2c_speed max9286_i2c_speeds[] = { 270 { .rate = 8470, .mstbt = MAX9286_I2CMSTBT_8KBPS }, 271 { .rate = 28300, .mstbt = MAX9286_I2CMSTBT_28KBPS }, 272 { .rate = 84700, .mstbt = MAX9286_I2CMSTBT_84KBPS }, 273 { .rate = 105000, .mstbt = MAX9286_I2CMSTBT_105KBPS }, 274 { .rate = 173000, .mstbt = MAX9286_I2CMSTBT_173KBPS }, 275 { .rate = 339000, .mstbt = MAX9286_I2CMSTBT_339KBPS }, 276 { .rate = 533000, .mstbt = MAX9286_I2CMSTBT_533KBPS }, 277 { .rate = 837000, .mstbt = MAX9286_I2CMSTBT_837KBPS }, 278 }; 279 280 /* ----------------------------------------------------------------------------- 281 * I2C IO 282 */ 283 284 static int max9286_read(struct max9286_priv *priv, u8 reg) 285 { 286 int ret; 287 288 ret = i2c_smbus_read_byte_data(priv->client, reg); 289 if (ret < 0) 290 dev_err(&priv->client->dev, 291 "%s: register 0x%02x read failed (%d)\n", 292 __func__, reg, ret); 293 294 return ret; 295 } 296 297 static int max9286_write(struct max9286_priv *priv, u8 reg, u8 val) 298 { 299 int ret; 300 301 ret = i2c_smbus_write_byte_data(priv->client, reg, val); 302 if (ret < 0) 303 dev_err(&priv->client->dev, 304 "%s: register 0x%02x write failed (%d)\n", 305 __func__, reg, ret); 306 307 return ret; 308 } 309 310 /* ----------------------------------------------------------------------------- 311 * I2C Multiplexer 312 */ 313 314 static void max9286_i2c_mux_configure(struct max9286_priv *priv, u8 conf) 315 { 316 max9286_write(priv, 0x0a, conf); 317 318 /* 319 * We must sleep after any change to the forward or reverse channel 320 * configuration. 321 */ 322 usleep_range(3000, 5000); 323 } 324 325 static void max9286_i2c_mux_open(struct max9286_priv *priv) 326 { 327 /* Open all channels on the MAX9286 */ 328 max9286_i2c_mux_configure(priv, 0xff); 329 330 priv->mux_open = true; 331 } 332 333 static void max9286_i2c_mux_close(struct max9286_priv *priv) 334 { 335 /* 336 * Ensure that both the forward and reverse channel are disabled on the 337 * mux, and that the channel ID is invalidated to ensure we reconfigure 338 * on the next max9286_i2c_mux_select() call. 339 */ 340 max9286_i2c_mux_configure(priv, 0x00); 341 342 priv->mux_open = false; 343 priv->mux_channel = -1; 344 } 345 346 static int max9286_i2c_mux_select(struct i2c_mux_core *muxc, u32 chan) 347 { 348 struct max9286_priv *priv = i2c_mux_priv(muxc); 349 350 /* Channel select is disabled when configured in the opened state. */ 351 if (priv->mux_open) 352 return 0; 353 354 if (priv->mux_channel == chan) 355 return 0; 356 357 priv->mux_channel = chan; 358 359 max9286_i2c_mux_configure(priv, MAX9286_FWDCCEN(chan) | 360 MAX9286_REVCCEN(chan)); 361 362 return 0; 363 } 364 365 static int max9286_i2c_mux_init(struct max9286_priv *priv) 366 { 367 struct max9286_source *source; 368 int ret; 369 370 if (!i2c_check_functionality(priv->client->adapter, 371 I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) 372 return -ENODEV; 373 374 priv->mux = i2c_mux_alloc(priv->client->adapter, &priv->client->dev, 375 priv->nsources, 0, I2C_MUX_LOCKED, 376 max9286_i2c_mux_select, NULL); 377 if (!priv->mux) 378 return -ENOMEM; 379 380 priv->mux->priv = priv; 381 382 for_each_source(priv, source) { 383 unsigned int index = to_index(priv, source); 384 385 ret = i2c_mux_add_adapter(priv->mux, 0, index, 0); 386 if (ret < 0) 387 goto error; 388 } 389 390 return 0; 391 392 error: 393 i2c_mux_del_adapters(priv->mux); 394 return ret; 395 } 396 397 static void max9286_configure_i2c(struct max9286_priv *priv, bool localack) 398 { 399 u8 config = MAX9286_I2CSLVSH_469NS_234NS | MAX9286_I2CSLVTO_1024US | 400 priv->i2c_mstbt; 401 402 if (localack) 403 config |= MAX9286_I2CLOCACK; 404 405 max9286_write(priv, 0x34, config); 406 usleep_range(3000, 5000); 407 } 408 409 static void max9286_reverse_channel_setup(struct max9286_priv *priv, 410 unsigned int chan_amplitude) 411 { 412 u8 chan_config; 413 414 if (priv->rev_chan_mv == chan_amplitude) 415 return; 416 417 priv->rev_chan_mv = chan_amplitude; 418 419 /* Reverse channel transmission time: default to 1. */ 420 chan_config = MAX9286_REV_TRF(1); 421 422 /* 423 * Reverse channel setup. 424 * 425 * - Enable custom reverse channel configuration (through register 0x3f) 426 * and set the first pulse length to 35 clock cycles. 427 * - Adjust reverse channel amplitude: values > 130 are programmed 428 * using the additional +100mV REV_AMP_X boost flag 429 */ 430 max9286_write(priv, 0x3f, MAX9286_EN_REV_CFG | MAX9286_REV_FLEN(35)); 431 432 if (chan_amplitude > 100) { 433 /* It is not possible to express values (100 < x < 130) */ 434 chan_amplitude = max(30U, chan_amplitude - 100); 435 chan_config |= MAX9286_REV_AMP_X; 436 } 437 max9286_write(priv, 0x3b, chan_config | MAX9286_REV_AMP(chan_amplitude)); 438 usleep_range(2000, 2500); 439 } 440 441 /* 442 * max9286_check_video_links() - Make sure video links are detected and locked 443 * 444 * Performs safety checks on video link status. Make sure they are detected 445 * and all enabled links are locked. 446 * 447 * Returns 0 for success, -EIO for errors. 448 */ 449 static int max9286_check_video_links(struct max9286_priv *priv) 450 { 451 unsigned int i; 452 int ret; 453 454 /* 455 * Make sure valid video links are detected. 456 * The delay is not characterized in de-serializer manual, wait up 457 * to 5 ms. 458 */ 459 for (i = 0; i < 10; i++) { 460 ret = max9286_read(priv, 0x49); 461 if (ret < 0) 462 return -EIO; 463 464 if ((ret & MAX9286_VIDEO_DETECT_MASK) == priv->source_mask) 465 break; 466 467 usleep_range(350, 500); 468 } 469 470 if (i == 10) { 471 dev_err(&priv->client->dev, 472 "Unable to detect video links: 0x%02x\n", ret); 473 return -EIO; 474 } 475 476 /* Make sure all enabled links are locked (4ms max). */ 477 for (i = 0; i < 10; i++) { 478 ret = max9286_read(priv, 0x27); 479 if (ret < 0) 480 return -EIO; 481 482 if (ret & MAX9286_LOCKED) 483 break; 484 485 usleep_range(350, 450); 486 } 487 488 if (i == 10) { 489 dev_err(&priv->client->dev, "Not all enabled links locked\n"); 490 return -EIO; 491 } 492 493 return 0; 494 } 495 496 /* 497 * max9286_check_config_link() - Detect and wait for configuration links 498 * 499 * Determine if the configuration channel is up and settled for a link. 500 * 501 * Returns 0 for success, -EIO for errors. 502 */ 503 static int max9286_check_config_link(struct max9286_priv *priv, 504 unsigned int source_mask) 505 { 506 unsigned int conflink_mask = (source_mask & 0x0f) << 4; 507 unsigned int i; 508 int ret; 509 510 /* 511 * Make sure requested configuration links are detected. 512 * The delay is not characterized in the chip manual: wait up 513 * to 5 milliseconds. 514 */ 515 for (i = 0; i < 10; i++) { 516 ret = max9286_read(priv, 0x49); 517 if (ret < 0) 518 return -EIO; 519 520 ret &= 0xf0; 521 if (ret == conflink_mask) 522 break; 523 524 usleep_range(350, 500); 525 } 526 527 if (ret != conflink_mask) { 528 dev_err(&priv->client->dev, 529 "Unable to detect configuration links: 0x%02x expected 0x%02x\n", 530 ret, conflink_mask); 531 return -EIO; 532 } 533 534 dev_info(&priv->client->dev, 535 "Successfully detected configuration links after %u loops: 0x%02x\n", 536 i, conflink_mask); 537 538 return 0; 539 } 540 541 static void max9286_set_video_format(struct max9286_priv *priv, 542 const struct v4l2_mbus_framefmt *format) 543 { 544 const struct max9286_format_info *info = NULL; 545 unsigned int i; 546 547 for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { 548 if (max9286_formats[i].code == format->code) { 549 info = &max9286_formats[i]; 550 break; 551 } 552 } 553 554 if (WARN_ON(!info)) 555 return; 556 557 /* 558 * Video format setup: disable CSI output, set VC according to Link 559 * number, enable I2C clock stretching when CCBSY is low, enable CCBSY 560 * in external GPI-to-GPO mode. 561 */ 562 max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_EN_CCBSYB_CLK_STR | 563 MAX9286_EN_GPI_CCBSYB); 564 565 /* Enable CSI-2 Lane D0-D3 only, DBL mode. */ 566 max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL | 567 MAX9286_CSILANECNT(priv->csi2_data_lanes) | 568 info->datatype); 569 570 /* 571 * Enable HS/VS encoding, use HS as line valid source, use D14/15 for 572 * HS/VS, invert VS. 573 */ 574 max9286_write(priv, 0x0c, MAX9286_HVEN | MAX9286_DESEL | 575 MAX9286_INVVS | MAX9286_HVSRC_D14); 576 } 577 578 static void max9286_set_fsync_period(struct max9286_priv *priv) 579 { 580 u32 fsync; 581 582 if (!priv->interval.numerator || !priv->interval.denominator) { 583 /* 584 * Special case, a null interval enables automatic FRAMESYNC 585 * mode. FRAMESYNC is taken from the slowest link. 586 */ 587 max9286_write(priv, 0x01, MAX9286_FSYNCMODE_INT_HIZ | 588 MAX9286_FSYNCMETH_AUTO); 589 return; 590 } 591 592 /* 593 * Manual FRAMESYNC 594 * 595 * The FRAMESYNC generator is configured with a period expressed as a 596 * number of PCLK periods. 597 */ 598 fsync = div_u64((u64)priv->pixelrate * priv->interval.numerator, 599 priv->interval.denominator); 600 601 dev_dbg(&priv->client->dev, "fsync period %u (pclk %u)\n", fsync, 602 priv->pixelrate); 603 604 max9286_write(priv, 0x01, MAX9286_FSYNCMODE_INT_OUT | 605 MAX9286_FSYNCMETH_MANUAL); 606 607 max9286_write(priv, 0x06, (fsync >> 0) & 0xff); 608 max9286_write(priv, 0x07, (fsync >> 8) & 0xff); 609 max9286_write(priv, 0x08, (fsync >> 16) & 0xff); 610 } 611 612 /* ----------------------------------------------------------------------------- 613 * V4L2 Subdev 614 */ 615 616 static int max9286_set_pixelrate(struct max9286_priv *priv) 617 { 618 struct max9286_source *source = NULL; 619 u64 pixelrate = 0; 620 621 for_each_source(priv, source) { 622 struct v4l2_ctrl *ctrl; 623 u64 source_rate = 0; 624 625 /* Pixel rate is mandatory to be reported by sources. */ 626 ctrl = v4l2_ctrl_find(source->sd->ctrl_handler, 627 V4L2_CID_PIXEL_RATE); 628 if (!ctrl) { 629 pixelrate = 0; 630 break; 631 } 632 633 /* All source must report the same pixel rate. */ 634 source_rate = v4l2_ctrl_g_ctrl_int64(ctrl); 635 if (!pixelrate) { 636 pixelrate = source_rate; 637 } else if (pixelrate != source_rate) { 638 dev_err(&priv->client->dev, 639 "Unable to calculate pixel rate\n"); 640 return -EINVAL; 641 } 642 } 643 644 if (!pixelrate) { 645 dev_err(&priv->client->dev, 646 "No pixel rate control available in sources\n"); 647 return -EINVAL; 648 } 649 650 priv->pixelrate = pixelrate; 651 652 /* 653 * The CSI-2 transmitter pixel rate is the single source rate multiplied 654 * by the number of available sources. 655 */ 656 return v4l2_ctrl_s_ctrl_int64(priv->pixelrate_ctrl, 657 pixelrate * priv->nsources); 658 } 659 660 static int max9286_notify_bound(struct v4l2_async_notifier *notifier, 661 struct v4l2_subdev *subdev, 662 struct v4l2_async_subdev *asd) 663 { 664 struct max9286_priv *priv = sd_to_max9286(notifier->sd); 665 struct max9286_source *source = to_max9286_asd(asd)->source; 666 unsigned int index = to_index(priv, source); 667 unsigned int src_pad; 668 int ret; 669 670 ret = media_entity_get_fwnode_pad(&subdev->entity, 671 source->fwnode, 672 MEDIA_PAD_FL_SOURCE); 673 if (ret < 0) { 674 dev_err(&priv->client->dev, 675 "Failed to find pad for %s\n", subdev->name); 676 return ret; 677 } 678 679 priv->bound_sources |= BIT(index); 680 source->sd = subdev; 681 src_pad = ret; 682 683 ret = media_create_pad_link(&source->sd->entity, src_pad, 684 &priv->sd.entity, index, 685 MEDIA_LNK_FL_ENABLED | 686 MEDIA_LNK_FL_IMMUTABLE); 687 if (ret) { 688 dev_err(&priv->client->dev, 689 "Unable to link %s:%u -> %s:%u\n", 690 source->sd->name, src_pad, priv->sd.name, index); 691 return ret; 692 } 693 694 dev_dbg(&priv->client->dev, "Bound %s pad: %u on index %u\n", 695 subdev->name, src_pad, index); 696 697 /* 698 * As we register a subdev notifiers we won't get a .complete() callback 699 * here, so we have to use bound_sources to identify when all remote 700 * serializers have probed. 701 */ 702 if (priv->bound_sources != priv->source_mask) 703 return 0; 704 705 /* 706 * All enabled sources have probed and enabled their reverse control 707 * channels: 708 * 709 * - Increase the reverse channel amplitude to compensate for the 710 * remote ends high threshold 711 * - Verify all configuration links are properly detected 712 * - Disable auto-ack as communication on the control channel are now 713 * stable. 714 */ 715 max9286_reverse_channel_setup(priv, MAX9286_REV_AMP_HIGH); 716 max9286_check_config_link(priv, priv->source_mask); 717 max9286_configure_i2c(priv, false); 718 719 return max9286_set_pixelrate(priv); 720 } 721 722 static void max9286_notify_unbind(struct v4l2_async_notifier *notifier, 723 struct v4l2_subdev *subdev, 724 struct v4l2_async_subdev *asd) 725 { 726 struct max9286_priv *priv = sd_to_max9286(notifier->sd); 727 struct max9286_source *source = to_max9286_asd(asd)->source; 728 unsigned int index = to_index(priv, source); 729 730 source->sd = NULL; 731 priv->bound_sources &= ~BIT(index); 732 } 733 734 static const struct v4l2_async_notifier_operations max9286_notify_ops = { 735 .bound = max9286_notify_bound, 736 .unbind = max9286_notify_unbind, 737 }; 738 739 static int max9286_v4l2_notifier_register(struct max9286_priv *priv) 740 { 741 struct device *dev = &priv->client->dev; 742 struct max9286_source *source = NULL; 743 int ret; 744 745 if (!priv->nsources) 746 return 0; 747 748 v4l2_async_nf_init(&priv->notifier); 749 750 for_each_source(priv, source) { 751 unsigned int i = to_index(priv, source); 752 struct max9286_asd *mas; 753 754 mas = v4l2_async_nf_add_fwnode(&priv->notifier, source->fwnode, 755 struct max9286_asd); 756 if (IS_ERR(mas)) { 757 dev_err(dev, "Failed to add subdev for source %u: %ld", 758 i, PTR_ERR(mas)); 759 v4l2_async_nf_cleanup(&priv->notifier); 760 return PTR_ERR(mas); 761 } 762 763 mas->source = source; 764 } 765 766 priv->notifier.ops = &max9286_notify_ops; 767 768 ret = v4l2_async_subdev_nf_register(&priv->sd, &priv->notifier); 769 if (ret) { 770 dev_err(dev, "Failed to register subdev_notifier"); 771 v4l2_async_nf_cleanup(&priv->notifier); 772 return ret; 773 } 774 775 return 0; 776 } 777 778 static void max9286_v4l2_notifier_unregister(struct max9286_priv *priv) 779 { 780 if (!priv->nsources) 781 return; 782 783 v4l2_async_nf_unregister(&priv->notifier); 784 v4l2_async_nf_cleanup(&priv->notifier); 785 } 786 787 static int max9286_s_stream(struct v4l2_subdev *sd, int enable) 788 { 789 struct max9286_priv *priv = sd_to_max9286(sd); 790 struct max9286_source *source; 791 unsigned int i; 792 bool sync = false; 793 int ret; 794 795 if (enable) { 796 const struct v4l2_mbus_framefmt *format; 797 798 /* 799 * Get the format from the first used sink pad, as all sink 800 * formats must be identical. 801 */ 802 format = &priv->fmt[__ffs(priv->bound_sources)]; 803 804 max9286_set_video_format(priv, format); 805 max9286_set_fsync_period(priv); 806 807 /* 808 * The frame sync between cameras is transmitted across the 809 * reverse channel as GPIO. We must open all channels while 810 * streaming to allow this synchronisation signal to be shared. 811 */ 812 max9286_i2c_mux_open(priv); 813 814 /* Start all cameras. */ 815 for_each_source(priv, source) { 816 ret = v4l2_subdev_call(source->sd, video, s_stream, 1); 817 if (ret) 818 return ret; 819 } 820 821 ret = max9286_check_video_links(priv); 822 if (ret) 823 return ret; 824 825 /* 826 * Wait until frame synchronization is locked. 827 * 828 * Manual says frame sync locking should take ~6 VTS. 829 * From practical experience at least 8 are required. Give 830 * 12 complete frames time (~400ms at 30 fps) to achieve frame 831 * locking before returning error. 832 */ 833 for (i = 0; i < 40; i++) { 834 if (max9286_read(priv, 0x31) & MAX9286_FSYNC_LOCKED) { 835 sync = true; 836 break; 837 } 838 usleep_range(9000, 11000); 839 } 840 841 if (!sync) { 842 dev_err(&priv->client->dev, 843 "Failed to get frame synchronization\n"); 844 return -EXDEV; /* Invalid cross-device link */ 845 } 846 847 /* 848 * Configure the CSI-2 output to line interleaved mode (W x (N 849 * x H), as opposed to the (N x W) x H mode that outputs the 850 * images stitched side-by-side) and enable it. 851 */ 852 max9286_write(priv, 0x15, MAX9286_CSI_IMAGE_TYP | MAX9286_VCTYPE | 853 MAX9286_CSIOUTEN | MAX9286_EN_CCBSYB_CLK_STR | 854 MAX9286_EN_GPI_CCBSYB); 855 } else { 856 max9286_write(priv, 0x15, MAX9286_VCTYPE | 857 MAX9286_EN_CCBSYB_CLK_STR | 858 MAX9286_EN_GPI_CCBSYB); 859 860 /* Stop all cameras. */ 861 for_each_source(priv, source) 862 v4l2_subdev_call(source->sd, video, s_stream, 0); 863 864 max9286_i2c_mux_close(priv); 865 } 866 867 return 0; 868 } 869 870 static int max9286_g_frame_interval(struct v4l2_subdev *sd, 871 struct v4l2_subdev_frame_interval *interval) 872 { 873 struct max9286_priv *priv = sd_to_max9286(sd); 874 875 if (interval->pad != MAX9286_SRC_PAD) 876 return -EINVAL; 877 878 interval->interval = priv->interval; 879 880 return 0; 881 } 882 883 static int max9286_s_frame_interval(struct v4l2_subdev *sd, 884 struct v4l2_subdev_frame_interval *interval) 885 { 886 struct max9286_priv *priv = sd_to_max9286(sd); 887 888 if (interval->pad != MAX9286_SRC_PAD) 889 return -EINVAL; 890 891 priv->interval = interval->interval; 892 893 return 0; 894 } 895 896 static int max9286_enum_mbus_code(struct v4l2_subdev *sd, 897 struct v4l2_subdev_state *sd_state, 898 struct v4l2_subdev_mbus_code_enum *code) 899 { 900 if (code->pad || code->index > 0) 901 return -EINVAL; 902 903 code->code = MEDIA_BUS_FMT_UYVY8_1X16; 904 905 return 0; 906 } 907 908 static struct v4l2_mbus_framefmt * 909 max9286_get_pad_format(struct max9286_priv *priv, 910 struct v4l2_subdev_state *sd_state, 911 unsigned int pad, u32 which) 912 { 913 switch (which) { 914 case V4L2_SUBDEV_FORMAT_TRY: 915 return v4l2_subdev_get_try_format(&priv->sd, sd_state, pad); 916 case V4L2_SUBDEV_FORMAT_ACTIVE: 917 return &priv->fmt[pad]; 918 default: 919 return NULL; 920 } 921 } 922 923 static int max9286_set_fmt(struct v4l2_subdev *sd, 924 struct v4l2_subdev_state *sd_state, 925 struct v4l2_subdev_format *format) 926 { 927 struct max9286_priv *priv = sd_to_max9286(sd); 928 struct v4l2_mbus_framefmt *cfg_fmt; 929 unsigned int i; 930 931 if (format->pad == MAX9286_SRC_PAD) 932 return -EINVAL; 933 934 /* Validate the format. */ 935 for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) { 936 if (max9286_formats[i].code == format->format.code) 937 break; 938 } 939 940 if (i == ARRAY_SIZE(max9286_formats)) 941 format->format.code = max9286_formats[0].code; 942 943 cfg_fmt = max9286_get_pad_format(priv, sd_state, format->pad, 944 format->which); 945 if (!cfg_fmt) 946 return -EINVAL; 947 948 mutex_lock(&priv->mutex); 949 *cfg_fmt = format->format; 950 mutex_unlock(&priv->mutex); 951 952 return 0; 953 } 954 955 static int max9286_get_fmt(struct v4l2_subdev *sd, 956 struct v4l2_subdev_state *sd_state, 957 struct v4l2_subdev_format *format) 958 { 959 struct max9286_priv *priv = sd_to_max9286(sd); 960 struct v4l2_mbus_framefmt *cfg_fmt; 961 unsigned int pad = format->pad; 962 963 /* 964 * Multiplexed Stream Support: Support link validation by returning the 965 * format of the first bound link. All links must have the same format, 966 * as we do not support mixing and matching of cameras connected to the 967 * max9286. 968 */ 969 if (pad == MAX9286_SRC_PAD) 970 pad = __ffs(priv->bound_sources); 971 972 cfg_fmt = max9286_get_pad_format(priv, sd_state, pad, format->which); 973 if (!cfg_fmt) 974 return -EINVAL; 975 976 mutex_lock(&priv->mutex); 977 format->format = *cfg_fmt; 978 mutex_unlock(&priv->mutex); 979 980 return 0; 981 } 982 983 static const struct v4l2_subdev_video_ops max9286_video_ops = { 984 .s_stream = max9286_s_stream, 985 .g_frame_interval = max9286_g_frame_interval, 986 .s_frame_interval = max9286_s_frame_interval, 987 }; 988 989 static const struct v4l2_subdev_pad_ops max9286_pad_ops = { 990 .enum_mbus_code = max9286_enum_mbus_code, 991 .get_fmt = max9286_get_fmt, 992 .set_fmt = max9286_set_fmt, 993 }; 994 995 static const struct v4l2_subdev_ops max9286_subdev_ops = { 996 .video = &max9286_video_ops, 997 .pad = &max9286_pad_ops, 998 }; 999 1000 static const struct v4l2_mbus_framefmt max9286_default_format = { 1001 .width = 1280, 1002 .height = 800, 1003 .code = MEDIA_BUS_FMT_UYVY8_1X16, 1004 .colorspace = V4L2_COLORSPACE_SRGB, 1005 .field = V4L2_FIELD_NONE, 1006 .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT, 1007 .quantization = V4L2_QUANTIZATION_DEFAULT, 1008 .xfer_func = V4L2_XFER_FUNC_DEFAULT, 1009 }; 1010 1011 static void max9286_init_format(struct v4l2_mbus_framefmt *fmt) 1012 { 1013 *fmt = max9286_default_format; 1014 } 1015 1016 static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) 1017 { 1018 struct v4l2_mbus_framefmt *format; 1019 unsigned int i; 1020 1021 for (i = 0; i < MAX9286_N_SINKS; i++) { 1022 format = v4l2_subdev_get_try_format(subdev, fh->state, i); 1023 max9286_init_format(format); 1024 } 1025 1026 return 0; 1027 } 1028 1029 static const struct v4l2_subdev_internal_ops max9286_subdev_internal_ops = { 1030 .open = max9286_open, 1031 }; 1032 1033 static const struct media_entity_operations max9286_media_ops = { 1034 .link_validate = v4l2_subdev_link_validate 1035 }; 1036 1037 static int max9286_s_ctrl(struct v4l2_ctrl *ctrl) 1038 { 1039 switch (ctrl->id) { 1040 case V4L2_CID_PIXEL_RATE: 1041 return 0; 1042 default: 1043 return -EINVAL; 1044 } 1045 } 1046 1047 static const struct v4l2_ctrl_ops max9286_ctrl_ops = { 1048 .s_ctrl = max9286_s_ctrl, 1049 }; 1050 1051 static int max9286_v4l2_register(struct max9286_priv *priv) 1052 { 1053 struct device *dev = &priv->client->dev; 1054 int ret; 1055 int i; 1056 1057 /* Register v4l2 async notifiers for connected Camera subdevices */ 1058 ret = max9286_v4l2_notifier_register(priv); 1059 if (ret) { 1060 dev_err(dev, "Unable to register V4L2 async notifiers\n"); 1061 return ret; 1062 } 1063 1064 /* Configure V4L2 for the MAX9286 itself */ 1065 1066 for (i = 0; i < MAX9286_N_SINKS; i++) 1067 max9286_init_format(&priv->fmt[i]); 1068 1069 v4l2_i2c_subdev_init(&priv->sd, priv->client, &max9286_subdev_ops); 1070 priv->sd.internal_ops = &max9286_subdev_internal_ops; 1071 priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; 1072 1073 v4l2_ctrl_handler_init(&priv->ctrls, 1); 1074 priv->pixelrate_ctrl = v4l2_ctrl_new_std(&priv->ctrls, 1075 &max9286_ctrl_ops, 1076 V4L2_CID_PIXEL_RATE, 1077 1, INT_MAX, 1, 50000000); 1078 1079 priv->sd.ctrl_handler = &priv->ctrls; 1080 ret = priv->ctrls.error; 1081 if (ret) 1082 goto err_async; 1083 1084 priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; 1085 priv->sd.entity.ops = &max9286_media_ops; 1086 1087 priv->pads[MAX9286_SRC_PAD].flags = MEDIA_PAD_FL_SOURCE; 1088 for (i = 0; i < MAX9286_SRC_PAD; i++) 1089 priv->pads[i].flags = MEDIA_PAD_FL_SINK; 1090 ret = media_entity_pads_init(&priv->sd.entity, MAX9286_N_PADS, 1091 priv->pads); 1092 if (ret) 1093 goto err_async; 1094 1095 ret = v4l2_async_register_subdev(&priv->sd); 1096 if (ret < 0) { 1097 dev_err(dev, "Unable to register subdevice\n"); 1098 goto err_async; 1099 } 1100 1101 return 0; 1102 1103 err_async: 1104 v4l2_ctrl_handler_free(&priv->ctrls); 1105 max9286_v4l2_notifier_unregister(priv); 1106 1107 return ret; 1108 } 1109 1110 static void max9286_v4l2_unregister(struct max9286_priv *priv) 1111 { 1112 fwnode_handle_put(priv->sd.fwnode); 1113 v4l2_ctrl_handler_free(&priv->ctrls); 1114 v4l2_async_unregister_subdev(&priv->sd); 1115 max9286_v4l2_notifier_unregister(priv); 1116 } 1117 1118 /* ----------------------------------------------------------------------------- 1119 * Probe/Remove 1120 */ 1121 1122 static int max9286_setup(struct max9286_priv *priv) 1123 { 1124 /* 1125 * Link ordering values for all enabled links combinations. Orders must 1126 * be assigned sequentially from 0 to the number of enabled links 1127 * without leaving any hole for disabled links. We thus assign orders to 1128 * enabled links first, and use the remaining order values for disabled 1129 * links are all links must have a different order value; 1130 */ 1131 static const u8 link_order[] = { 1132 (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xxxx */ 1133 (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xxx0 */ 1134 (3 << 6) | (2 << 4) | (0 << 2) | (1 << 0), /* xx0x */ 1135 (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* xx10 */ 1136 (3 << 6) | (0 << 4) | (2 << 2) | (1 << 0), /* x0xx */ 1137 (3 << 6) | (1 << 4) | (2 << 2) | (0 << 0), /* x1x0 */ 1138 (3 << 6) | (1 << 4) | (0 << 2) | (2 << 0), /* x10x */ 1139 (3 << 6) | (1 << 4) | (1 << 2) | (0 << 0), /* x210 */ 1140 (0 << 6) | (3 << 4) | (2 << 2) | (1 << 0), /* 0xxx */ 1141 (1 << 6) | (3 << 4) | (2 << 2) | (0 << 0), /* 1xx0 */ 1142 (1 << 6) | (3 << 4) | (0 << 2) | (2 << 0), /* 1x0x */ 1143 (2 << 6) | (3 << 4) | (1 << 2) | (0 << 0), /* 2x10 */ 1144 (1 << 6) | (0 << 4) | (3 << 2) | (2 << 0), /* 10xx */ 1145 (2 << 6) | (1 << 4) | (3 << 2) | (0 << 0), /* 21x0 */ 1146 (2 << 6) | (1 << 4) | (0 << 2) | (3 << 0), /* 210x */ 1147 (3 << 6) | (2 << 4) | (1 << 2) | (0 << 0), /* 3210 */ 1148 }; 1149 int cfg; 1150 1151 /* 1152 * Set the I2C bus speed. 1153 * 1154 * Enable I2C Local Acknowledge during the probe sequences of the camera 1155 * only. This should be disabled after the mux is initialised. 1156 */ 1157 max9286_configure_i2c(priv, true); 1158 max9286_reverse_channel_setup(priv, priv->init_rev_chan_mv); 1159 1160 /* 1161 * Enable GMSL links, mask unused ones and autodetect link 1162 * used as CSI clock source. 1163 */ 1164 max9286_write(priv, 0x00, MAX9286_MSTLINKSEL_AUTO | priv->route_mask); 1165 max9286_write(priv, 0x0b, link_order[priv->route_mask]); 1166 max9286_write(priv, 0x69, (0xf & ~priv->route_mask)); 1167 1168 max9286_set_video_format(priv, &max9286_default_format); 1169 max9286_set_fsync_period(priv); 1170 1171 cfg = max9286_read(priv, 0x1c); 1172 if (cfg < 0) 1173 return cfg; 1174 1175 dev_dbg(&priv->client->dev, "power-up config: %s immunity, %u-bit bus\n", 1176 cfg & MAX9286_HIGHIMM(0) ? "high" : "legacy", 1177 cfg & MAX9286_BWS ? 32 : cfg & MAX9286_HIBW ? 27 : 24); 1178 1179 if (priv->bus_width) { 1180 cfg &= ~(MAX9286_HIBW | MAX9286_BWS); 1181 1182 if (priv->bus_width == 27) 1183 cfg |= MAX9286_HIBW; 1184 else if (priv->bus_width == 32) 1185 cfg |= MAX9286_BWS; 1186 1187 max9286_write(priv, 0x1c, cfg); 1188 } 1189 1190 /* 1191 * The overlap window seems to provide additional validation by tracking 1192 * the delay between vsync and frame sync, generating an error if the 1193 * delay is bigger than the programmed window, though it's not yet clear 1194 * what value should be set. 1195 * 1196 * As it's an optional value and can be disabled, we do so by setting 1197 * a 0 overlap value. 1198 */ 1199 max9286_write(priv, 0x63, 0); 1200 max9286_write(priv, 0x64, 0); 1201 1202 /* 1203 * Wait for 2ms to allow the link to resynchronize after the 1204 * configuration change. 1205 */ 1206 usleep_range(2000, 5000); 1207 1208 return 0; 1209 } 1210 1211 static int max9286_gpio_set(struct max9286_priv *priv, unsigned int offset, 1212 int value) 1213 { 1214 if (value) 1215 priv->gpio_state |= BIT(offset); 1216 else 1217 priv->gpio_state &= ~BIT(offset); 1218 1219 return max9286_write(priv, 0x0f, 1220 MAX9286_0X0F_RESERVED | priv->gpio_state); 1221 } 1222 1223 static void max9286_gpiochip_set(struct gpio_chip *chip, 1224 unsigned int offset, int value) 1225 { 1226 struct max9286_priv *priv = gpiochip_get_data(chip); 1227 1228 max9286_gpio_set(priv, offset, value); 1229 } 1230 1231 static int max9286_gpiochip_get(struct gpio_chip *chip, unsigned int offset) 1232 { 1233 struct max9286_priv *priv = gpiochip_get_data(chip); 1234 1235 return priv->gpio_state & BIT(offset); 1236 } 1237 1238 static int max9286_register_gpio(struct max9286_priv *priv) 1239 { 1240 struct device *dev = &priv->client->dev; 1241 struct gpio_chip *gpio = &priv->gpio; 1242 int ret; 1243 1244 /* Configure the GPIO */ 1245 gpio->label = dev_name(dev); 1246 gpio->parent = dev; 1247 gpio->owner = THIS_MODULE; 1248 gpio->ngpio = 2; 1249 gpio->base = -1; 1250 gpio->set = max9286_gpiochip_set; 1251 gpio->get = max9286_gpiochip_get; 1252 gpio->can_sleep = true; 1253 1254 ret = devm_gpiochip_add_data(dev, gpio, priv); 1255 if (ret) 1256 dev_err(dev, "Unable to create gpio_chip\n"); 1257 1258 return ret; 1259 } 1260 1261 static int max9286_parse_gpios(struct max9286_priv *priv) 1262 { 1263 struct device *dev = &priv->client->dev; 1264 int ret; 1265 1266 /* 1267 * Parse the "gpio-poc" vendor property. If the property is not 1268 * specified the camera power is controlled by a regulator. 1269 */ 1270 ret = of_property_read_u32_array(dev->of_node, "maxim,gpio-poc", 1271 priv->gpio_poc, 2); 1272 if (ret == -EINVAL) { 1273 /* 1274 * If gpio lines are not used for the camera power, register 1275 * a gpio controller for consumers. 1276 */ 1277 return max9286_register_gpio(priv); 1278 } 1279 1280 /* If the property is specified make sure it is well formed. */ 1281 if (ret || priv->gpio_poc[0] > 1 || 1282 (priv->gpio_poc[1] != GPIO_ACTIVE_HIGH && 1283 priv->gpio_poc[1] != GPIO_ACTIVE_LOW)) { 1284 dev_err(dev, "Invalid 'gpio-poc' property\n"); 1285 return -EINVAL; 1286 } 1287 1288 priv->use_gpio_poc = true; 1289 return 0; 1290 } 1291 1292 static int max9286_poc_power_on(struct max9286_priv *priv) 1293 { 1294 struct max9286_source *source; 1295 unsigned int enabled = 0; 1296 int ret; 1297 1298 /* Enable the global regulator if available. */ 1299 if (priv->regulator) 1300 return regulator_enable(priv->regulator); 1301 1302 if (priv->use_gpio_poc) 1303 return max9286_gpio_set(priv, priv->gpio_poc[0], 1304 !priv->gpio_poc[1]); 1305 1306 /* Otherwise use the per-port regulators. */ 1307 for_each_source(priv, source) { 1308 ret = regulator_enable(source->regulator); 1309 if (ret < 0) 1310 goto error; 1311 1312 enabled |= BIT(to_index(priv, source)); 1313 } 1314 1315 return 0; 1316 1317 error: 1318 for_each_source(priv, source) { 1319 if (enabled & BIT(to_index(priv, source))) 1320 regulator_disable(source->regulator); 1321 } 1322 1323 return ret; 1324 } 1325 1326 static int max9286_poc_power_off(struct max9286_priv *priv) 1327 { 1328 struct max9286_source *source; 1329 int ret = 0; 1330 1331 if (priv->regulator) 1332 return regulator_disable(priv->regulator); 1333 1334 if (priv->use_gpio_poc) 1335 return max9286_gpio_set(priv, priv->gpio_poc[0], 1336 priv->gpio_poc[1]); 1337 1338 for_each_source(priv, source) { 1339 int err; 1340 1341 err = regulator_disable(source->regulator); 1342 if (!ret) 1343 ret = err; 1344 } 1345 1346 return ret; 1347 } 1348 1349 static int max9286_poc_enable(struct max9286_priv *priv, bool enable) 1350 { 1351 int ret; 1352 1353 if (enable) 1354 ret = max9286_poc_power_on(priv); 1355 else 1356 ret = max9286_poc_power_off(priv); 1357 1358 if (ret < 0) 1359 dev_err(&priv->client->dev, "Unable to turn power %s\n", 1360 enable ? "on" : "off"); 1361 1362 return ret; 1363 } 1364 1365 static int max9286_init(struct max9286_priv *priv) 1366 { 1367 struct i2c_client *client = priv->client; 1368 int ret; 1369 1370 ret = max9286_poc_enable(priv, true); 1371 if (ret) 1372 return ret; 1373 1374 ret = max9286_setup(priv); 1375 if (ret) { 1376 dev_err(&client->dev, "Unable to setup max9286\n"); 1377 goto err_poc_disable; 1378 } 1379 1380 /* 1381 * Register all V4L2 interactions for the MAX9286 and notifiers for 1382 * any subdevices connected. 1383 */ 1384 ret = max9286_v4l2_register(priv); 1385 if (ret) { 1386 dev_err(&client->dev, "Failed to register with V4L2\n"); 1387 goto err_poc_disable; 1388 } 1389 1390 ret = max9286_i2c_mux_init(priv); 1391 if (ret) { 1392 dev_err(&client->dev, "Unable to initialize I2C multiplexer\n"); 1393 goto err_v4l2_register; 1394 } 1395 1396 /* Leave the mux channels disabled until they are selected. */ 1397 max9286_i2c_mux_close(priv); 1398 1399 return 0; 1400 1401 err_v4l2_register: 1402 max9286_v4l2_unregister(priv); 1403 err_poc_disable: 1404 max9286_poc_enable(priv, false); 1405 1406 return ret; 1407 } 1408 1409 static void max9286_cleanup_dt(struct max9286_priv *priv) 1410 { 1411 struct max9286_source *source; 1412 1413 for_each_source(priv, source) { 1414 fwnode_handle_put(source->fwnode); 1415 source->fwnode = NULL; 1416 } 1417 } 1418 1419 static int max9286_parse_dt(struct max9286_priv *priv) 1420 { 1421 struct device *dev = &priv->client->dev; 1422 struct device_node *i2c_mux; 1423 struct device_node *node = NULL; 1424 unsigned int i2c_mux_mask = 0; 1425 u32 reverse_channel_microvolt; 1426 u32 i2c_clk_freq = 105000; 1427 unsigned int i; 1428 1429 /* Balance the of_node_put() performed by of_find_node_by_name(). */ 1430 of_node_get(dev->of_node); 1431 i2c_mux = of_find_node_by_name(dev->of_node, "i2c-mux"); 1432 if (!i2c_mux) { 1433 dev_err(dev, "Failed to find i2c-mux node\n"); 1434 return -EINVAL; 1435 } 1436 1437 /* Identify which i2c-mux channels are enabled */ 1438 for_each_child_of_node(i2c_mux, node) { 1439 u32 id = 0; 1440 1441 of_property_read_u32(node, "reg", &id); 1442 if (id >= MAX9286_NUM_GMSL) 1443 continue; 1444 1445 if (!of_device_is_available(node)) { 1446 dev_dbg(dev, "Skipping disabled I2C bus port %u\n", id); 1447 continue; 1448 } 1449 1450 i2c_mux_mask |= BIT(id); 1451 } 1452 of_node_put(node); 1453 of_node_put(i2c_mux); 1454 1455 /* Parse the endpoints */ 1456 for_each_endpoint_of_node(dev->of_node, node) { 1457 struct max9286_source *source; 1458 struct of_endpoint ep; 1459 1460 of_graph_parse_endpoint(node, &ep); 1461 dev_dbg(dev, "Endpoint %pOF on port %d", 1462 ep.local_node, ep.port); 1463 1464 if (ep.port > MAX9286_NUM_GMSL) { 1465 dev_err(dev, "Invalid endpoint %s on port %d", 1466 of_node_full_name(ep.local_node), ep.port); 1467 continue; 1468 } 1469 1470 /* For the source endpoint just parse the bus configuration. */ 1471 if (ep.port == MAX9286_SRC_PAD) { 1472 struct v4l2_fwnode_endpoint vep = { 1473 .bus_type = V4L2_MBUS_CSI2_DPHY 1474 }; 1475 int ret; 1476 1477 ret = v4l2_fwnode_endpoint_parse( 1478 of_fwnode_handle(node), &vep); 1479 if (ret) { 1480 of_node_put(node); 1481 return ret; 1482 } 1483 1484 priv->csi2_data_lanes = 1485 vep.bus.mipi_csi2.num_data_lanes; 1486 1487 continue; 1488 } 1489 1490 /* Skip if the corresponding GMSL link is unavailable. */ 1491 if (!(i2c_mux_mask & BIT(ep.port))) 1492 continue; 1493 1494 if (priv->sources[ep.port].fwnode) { 1495 dev_err(dev, 1496 "Multiple port endpoints are not supported: %d", 1497 ep.port); 1498 1499 continue; 1500 } 1501 1502 source = &priv->sources[ep.port]; 1503 source->fwnode = fwnode_graph_get_remote_endpoint( 1504 of_fwnode_handle(node)); 1505 if (!source->fwnode) { 1506 dev_err(dev, 1507 "Endpoint %pOF has no remote endpoint connection\n", 1508 ep.local_node); 1509 1510 continue; 1511 } 1512 1513 priv->source_mask |= BIT(ep.port); 1514 priv->nsources++; 1515 } 1516 of_node_put(node); 1517 1518 of_property_read_u32(dev->of_node, "maxim,bus-width", &priv->bus_width); 1519 switch (priv->bus_width) { 1520 case 0: 1521 /* 1522 * The property isn't specified in the device tree, the driver 1523 * will keep the default value selected by the BWS pin. 1524 */ 1525 case 24: 1526 case 27: 1527 case 32: 1528 break; 1529 default: 1530 dev_err(dev, "Invalid %s value %u\n", "maxim,bus-width", 1531 priv->bus_width); 1532 return -EINVAL; 1533 } 1534 1535 of_property_read_u32(dev->of_node, "maxim,i2c-remote-bus-hz", 1536 &i2c_clk_freq); 1537 for (i = 0; i < ARRAY_SIZE(max9286_i2c_speeds); ++i) { 1538 const struct max9286_i2c_speed *speed = &max9286_i2c_speeds[i]; 1539 1540 if (speed->rate == i2c_clk_freq) { 1541 priv->i2c_mstbt = speed->mstbt; 1542 break; 1543 } 1544 } 1545 1546 if (i == ARRAY_SIZE(max9286_i2c_speeds)) { 1547 dev_err(dev, "Invalid %s value %u\n", "maxim,i2c-remote-bus-hz", 1548 i2c_clk_freq); 1549 return -EINVAL; 1550 } 1551 1552 /* 1553 * Parse the initial value of the reverse channel amplitude from 1554 * the firmware interface and convert it to millivolts. 1555 * 1556 * Default it to 170mV for backward compatibility with DTBs that do not 1557 * provide the property. 1558 */ 1559 if (of_property_read_u32(dev->of_node, 1560 "maxim,reverse-channel-microvolt", 1561 &reverse_channel_microvolt)) 1562 priv->init_rev_chan_mv = 170; 1563 else 1564 priv->init_rev_chan_mv = reverse_channel_microvolt / 1000U; 1565 1566 priv->route_mask = priv->source_mask; 1567 1568 return 0; 1569 } 1570 1571 static int max9286_get_poc_supplies(struct max9286_priv *priv) 1572 { 1573 struct device *dev = &priv->client->dev; 1574 struct max9286_source *source; 1575 int ret; 1576 1577 /* Start by getting the global regulator. */ 1578 priv->regulator = devm_regulator_get_optional(dev, "poc"); 1579 if (!IS_ERR(priv->regulator)) 1580 return 0; 1581 1582 if (PTR_ERR(priv->regulator) != -ENODEV) 1583 return dev_err_probe(dev, PTR_ERR(priv->regulator), 1584 "Unable to get PoC regulator\n"); 1585 1586 /* If there's no global regulator, get per-port regulators. */ 1587 dev_dbg(dev, 1588 "No global PoC regulator, looking for per-port regulators\n"); 1589 priv->regulator = NULL; 1590 1591 for_each_source(priv, source) { 1592 unsigned int index = to_index(priv, source); 1593 char name[10]; 1594 1595 snprintf(name, sizeof(name), "port%u-poc", index); 1596 source->regulator = devm_regulator_get(dev, name); 1597 if (IS_ERR(source->regulator)) { 1598 ret = PTR_ERR(source->regulator); 1599 dev_err_probe(dev, ret, 1600 "Unable to get port %u PoC regulator\n", 1601 index); 1602 return ret; 1603 } 1604 } 1605 1606 return 0; 1607 } 1608 1609 static int max9286_probe(struct i2c_client *client) 1610 { 1611 struct max9286_priv *priv; 1612 int ret; 1613 1614 priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); 1615 if (!priv) 1616 return -ENOMEM; 1617 1618 mutex_init(&priv->mutex); 1619 1620 priv->client = client; 1621 1622 /* GPIO values default to high */ 1623 priv->gpio_state = BIT(0) | BIT(1); 1624 1625 ret = max9286_parse_dt(priv); 1626 if (ret) 1627 goto err_cleanup_dt; 1628 1629 priv->gpiod_pwdn = devm_gpiod_get_optional(&client->dev, "enable", 1630 GPIOD_OUT_HIGH); 1631 if (IS_ERR(priv->gpiod_pwdn)) { 1632 ret = PTR_ERR(priv->gpiod_pwdn); 1633 goto err_cleanup_dt; 1634 } 1635 1636 gpiod_set_consumer_name(priv->gpiod_pwdn, "max9286-pwdn"); 1637 gpiod_set_value_cansleep(priv->gpiod_pwdn, 1); 1638 1639 /* Wait at least 4ms before the I2C lines latch to the address */ 1640 if (priv->gpiod_pwdn) 1641 usleep_range(4000, 5000); 1642 1643 /* 1644 * The MAX9286 starts by default with all ports enabled, we disable all 1645 * ports early to ensure that all channels are disabled if we error out 1646 * and keep the bus consistent. 1647 */ 1648 max9286_i2c_mux_close(priv); 1649 1650 /* 1651 * The MAX9286 initialises with auto-acknowledge enabled by default. 1652 * This can be invasive to other transactions on the same bus, so 1653 * disable it early. It will be enabled only as and when needed. 1654 */ 1655 max9286_configure_i2c(priv, false); 1656 1657 ret = max9286_parse_gpios(priv); 1658 if (ret) 1659 goto err_powerdown; 1660 1661 if (!priv->use_gpio_poc) { 1662 ret = max9286_get_poc_supplies(priv); 1663 if (ret) 1664 goto err_cleanup_dt; 1665 } 1666 1667 ret = max9286_init(priv); 1668 if (ret < 0) 1669 goto err_cleanup_dt; 1670 1671 return 0; 1672 1673 err_powerdown: 1674 gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); 1675 err_cleanup_dt: 1676 max9286_cleanup_dt(priv); 1677 1678 return ret; 1679 } 1680 1681 static void max9286_remove(struct i2c_client *client) 1682 { 1683 struct max9286_priv *priv = sd_to_max9286(i2c_get_clientdata(client)); 1684 1685 i2c_mux_del_adapters(priv->mux); 1686 1687 max9286_v4l2_unregister(priv); 1688 1689 max9286_poc_enable(priv, false); 1690 1691 gpiod_set_value_cansleep(priv->gpiod_pwdn, 0); 1692 1693 max9286_cleanup_dt(priv); 1694 } 1695 1696 static const struct of_device_id max9286_dt_ids[] = { 1697 { .compatible = "maxim,max9286" }, 1698 {}, 1699 }; 1700 MODULE_DEVICE_TABLE(of, max9286_dt_ids); 1701 1702 static struct i2c_driver max9286_i2c_driver = { 1703 .driver = { 1704 .name = "max9286", 1705 .of_match_table = max9286_dt_ids, 1706 }, 1707 .probe = max9286_probe, 1708 .remove = max9286_remove, 1709 }; 1710 1711 module_i2c_driver(max9286_i2c_driver); 1712 1713 MODULE_DESCRIPTION("Maxim MAX9286 GMSL Deserializer Driver"); 1714 MODULE_AUTHOR("Jacopo Mondi, Kieran Bingham, Laurent Pinchart, Niklas Söderlund, Vladimir Barinov"); 1715 MODULE_LICENSE("GPL"); 1716