xref: /openbmc/linux/drivers/media/i2c/ccs/ccs.h (revision 724ba675)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * drivers/media/i2c/smiapp/ccs.h
4  *
5  * Generic driver for MIPI CCS/SMIA/SMIA++ compliant camera sensors
6  *
7  * Copyright (C) 2020 Intel Corporation
8  * Copyright (C) 2010--2012 Nokia Corporation
9  * Contact: Sakari Ailus <sakari.ailus@linux.intel.com>
10  */
11 
12 #ifndef __CCS_H__
13 #define __CCS_H__
14 
15 #include <linux/mutex.h>
16 #include <media/v4l2-ctrls.h>
17 #include <media/v4l2-subdev.h>
18 
19 #include "ccs-data.h"
20 #include "ccs-limits.h"
21 #include "ccs-quirk.h"
22 #include "ccs-regs.h"
23 #include "ccs-reg-access.h"
24 #include "../ccs-pll.h"
25 #include "smiapp-reg-defs.h"
26 
27 /*
28  * Standard SMIA++ constants
29  */
30 #define SMIA_VERSION_1			10
31 #define SMIAPP_VERSION_0_8		8 /* Draft 0.8 */
32 #define SMIAPP_VERSION_0_9		9 /* Draft 0.9 */
33 #define SMIAPP_VERSION_1		10
34 
35 #define SMIAPP_PROFILE_0		0
36 #define SMIAPP_PROFILE_1		1
37 #define SMIAPP_PROFILE_2		2
38 
39 #define SMIAPP_NVM_PAGE_SIZE		64	/* bytes */
40 
41 #define SMIAPP_RESET_DELAY_CLOCKS	2400
42 #define SMIAPP_RESET_DELAY(clk)				\
43 	(1000 +	(SMIAPP_RESET_DELAY_CLOCKS * 1000	\
44 		 + (clk) / 1000 - 1) / ((clk) / 1000))
45 
46 #define CCS_COLOUR_COMPONENTS		4
47 
48 #define SMIAPP_NAME			"smiapp"
49 #define CCS_NAME			"ccs"
50 
51 #define CCS_DFL_I2C_ADDR	(0x20 >> 1) /* Default I2C Address */
52 #define CCS_ALT_I2C_ADDR	(0x6e >> 1) /* Alternate I2C Address */
53 
54 #define CCS_LIM(sensor, limit) \
55 	ccs_get_limit(sensor, CCS_L_##limit, 0)
56 
57 #define CCS_LIM_AT(sensor, limit, offset)	\
58 	ccs_get_limit(sensor, CCS_L_##limit, CCS_L_##limit##_OFFSET(offset))
59 
60 struct ccs_flash_strobe_parms {
61 	u8 mode;
62 	u32 strobe_width_high_us;
63 	u16 strobe_delay;
64 	u16 stobe_start_point;
65 	u8 trigger;
66 };
67 
68 struct ccs_hwconfig {
69 	/*
70 	 * Change the cci address if i2c_addr_alt is set.
71 	 * Both default and alternate cci addr need to be present
72 	 */
73 	unsigned short i2c_addr_dfl;	/* Default i2c addr */
74 	unsigned short i2c_addr_alt;	/* Alternate i2c addr */
75 
76 	u32 ext_clk;			/* sensor external clk */
77 
78 	unsigned int lanes;		/* Number of CSI-2 lanes */
79 	u32 csi_signalling_mode;	/* CCS_CSI_SIGNALLING_MODE_* */
80 	u64 *op_sys_clock;
81 
82 	struct ccs_flash_strobe_parms *strobe_setup;
83 };
84 
85 struct ccs_quirk;
86 
87 #define CCS_MODULE_IDENT_FLAG_REV_LE		(1 << 0)
88 
89 struct ccs_module_ident {
90 	u16 mipi_manufacturer_id;
91 	u16 model_id;
92 	u8 smia_manufacturer_id;
93 	u8 revision_number_major;
94 
95 	u8 flags;
96 
97 	char *name;
98 	const struct ccs_quirk *quirk;
99 };
100 
101 struct ccs_module_info {
102 	u32 smia_manufacturer_id;
103 	u32 mipi_manufacturer_id;
104 	u32 model_id;
105 	u32 revision_number;
106 
107 	u32 module_year;
108 	u32 module_month;
109 	u32 module_day;
110 
111 	u32 sensor_smia_manufacturer_id;
112 	u32 sensor_mipi_manufacturer_id;
113 	u32 sensor_model_id;
114 	u32 sensor_revision_number;
115 	u32 sensor_firmware_version;
116 
117 	u32 smia_version;
118 	u32 smiapp_version;
119 	u32 ccs_version;
120 
121 	char *name;
122 	const struct ccs_quirk *quirk;
123 };
124 
125 #define CCS_IDENT_FQ(manufacturer, model, rev, fl, _name, _quirk)	\
126 	{ .smia_manufacturer_id = manufacturer,				\
127 	  .model_id = model,						\
128 	  .revision_number_major = rev,					\
129 	  .flags = fl,							\
130 	  .name = _name,						\
131 	  .quirk = _quirk, }
132 
133 #define CCS_IDENT_LQ(manufacturer, model, rev, _name, _quirk)	\
134 	{ .smia_manufacturer_id = manufacturer,				\
135 	  .model_id = model,						\
136 	  .revision_number_major = rev,					\
137 	  .flags = CCS_MODULE_IDENT_FLAG_REV_LE,			\
138 	  .name = _name,						\
139 	  .quirk = _quirk, }
140 
141 #define CCS_IDENT_L(manufacturer, model, rev, _name)			\
142 	{ .smia_manufacturer_id = manufacturer,				\
143 	  .model_id = model,						\
144 	  .revision_number_major = rev,					\
145 	  .flags = CCS_MODULE_IDENT_FLAG_REV_LE,			\
146 	  .name = _name, }
147 
148 #define CCS_IDENT_Q(manufacturer, model, rev, _name, _quirk)		\
149 	{ .smia_manufacturer_id = manufacturer,				\
150 	  .model_id = model,						\
151 	  .revision_number_major = rev,					\
152 	  .flags = 0,							\
153 	  .name = _name,						\
154 	  .quirk = _quirk, }
155 
156 #define CCS_IDENT(manufacturer, model, rev, _name)			\
157 	{ .smia_manufacturer_id = manufacturer,				\
158 	  .model_id = model,						\
159 	  .revision_number_major = rev,					\
160 	  .flags = 0,							\
161 	  .name = _name, }
162 
163 struct ccs_csi_data_format {
164 	u32 code;
165 	u8 width;
166 	u8 compressed;
167 	u8 pixel_order;
168 };
169 
170 #define CCS_SUBDEVS			3
171 
172 #define CCS_PA_PAD_SRC			0
173 #define CCS_PAD_SINK			0
174 #define CCS_PAD_SRC			1
175 #define CCS_PADS			2
176 
177 struct ccs_binning_subtype {
178 	u8 horizontal:4;
179 	u8 vertical:4;
180 } __packed;
181 
182 struct ccs_subdev {
183 	struct v4l2_subdev sd;
184 	struct media_pad pads[CCS_PADS];
185 	struct v4l2_rect sink_fmt;
186 	struct v4l2_rect crop[CCS_PADS];
187 	struct v4l2_rect compose; /* compose on sink */
188 	unsigned short sink_pad;
189 	unsigned short source_pad;
190 	int npads;
191 	struct ccs_sensor *sensor;
192 	struct v4l2_ctrl_handler ctrl_handler;
193 };
194 
195 /*
196  * struct ccs_sensor - Main device structure
197  */
198 struct ccs_sensor {
199 	/*
200 	 * "mutex" is used to serialise access to all fields here
201 	 * except v4l2_ctrls at the end of the struct. "mutex" is also
202 	 * used to serialise access to file handle specific
203 	 * information.
204 	 */
205 	struct mutex mutex;
206 	struct ccs_subdev ssds[CCS_SUBDEVS];
207 	u32 ssds_used;
208 	struct ccs_subdev *src;
209 	struct ccs_subdev *binner;
210 	struct ccs_subdev *scaler;
211 	struct ccs_subdev *pixel_array;
212 	struct ccs_hwconfig hwcfg;
213 	struct regulator_bulk_data *regulators;
214 	struct clk *ext_clk;
215 	struct gpio_desc *xshutdown;
216 	struct gpio_desc *reset;
217 	void *ccs_limits;
218 	u8 nbinning_subtypes;
219 	struct ccs_binning_subtype binning_subtypes[CCS_LIM_BINNING_SUB_TYPE_MAX_N + 1];
220 	u32 mbus_frame_fmts;
221 	const struct ccs_csi_data_format *csi_format;
222 	const struct ccs_csi_data_format *internal_csi_format;
223 	u32 default_mbus_frame_fmts;
224 	int default_pixel_order;
225 	struct ccs_data_container sdata, mdata;
226 
227 	u8 binning_horizontal;
228 	u8 binning_vertical;
229 
230 	u8 scale_m;
231 	u8 scaling_mode;
232 
233 	u8 frame_skip;
234 	u16 embedded_start; /* embedded data start line */
235 	u16 embedded_end;
236 	u16 image_start; /* image data start line */
237 	u16 visible_pixel_start; /* start pixel of the visible image */
238 
239 	bool streaming;
240 	bool dev_init_done;
241 	u8 compressed_min_bpp;
242 
243 	struct ccs_module_info minfo;
244 
245 	struct ccs_pll pll;
246 
247 	/* Is a default format supported for a given BPP? */
248 	unsigned long *valid_link_freqs;
249 
250 	/* Pixel array controls */
251 	struct v4l2_ctrl *exposure;
252 	struct v4l2_ctrl *hflip;
253 	struct v4l2_ctrl *vflip;
254 	struct v4l2_ctrl *vblank;
255 	struct v4l2_ctrl *hblank;
256 	struct v4l2_ctrl *pixel_rate_parray;
257 	struct v4l2_ctrl *luminance_level;
258 	/* src controls */
259 	struct v4l2_ctrl *link_freq;
260 	struct v4l2_ctrl *pixel_rate_csi;
261 	/* test pattern colour components */
262 	struct v4l2_ctrl *test_data[CCS_COLOUR_COMPONENTS];
263 };
264 
265 #define to_ccs_subdev(_sd)				\
266 	container_of(_sd, struct ccs_subdev, sd)
267 
268 #define to_ccs_sensor(_sd)	\
269 	(to_ccs_subdev(_sd)->sensor)
270 
271 void ccs_replace_limit(struct ccs_sensor *sensor,
272 		       unsigned int limit, unsigned int offset, u32 val);
273 u32 ccs_get_limit(struct ccs_sensor *sensor, unsigned int limit,
274 		  unsigned int offset);
275 
276 #endif /* __CCS_H__ */
277