1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM) 4 * 5 * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> 6 */ 7 8 #include <linux/i2c.h> 9 #include <linux/init.h> 10 #include <linux/platform_device.h> 11 #include <linux/slab.h> 12 #include <linux/videodev2.h> 13 #include <linux/module.h> 14 15 #include <media/i2c/ak881x.h> 16 #include <media/v4l2-common.h> 17 #include <media/v4l2-device.h> 18 19 #define AK881X_INTERFACE_MODE 0 20 #define AK881X_VIDEO_PROCESS1 1 21 #define AK881X_VIDEO_PROCESS2 2 22 #define AK881X_VIDEO_PROCESS3 3 23 #define AK881X_DAC_MODE 5 24 #define AK881X_STATUS 0x24 25 #define AK881X_DEVICE_ID 0x25 26 #define AK881X_DEVICE_REVISION 0x26 27 28 struct ak881x { 29 struct v4l2_subdev subdev; 30 struct ak881x_pdata *pdata; 31 unsigned int lines; 32 char revision; /* DEVICE_REVISION content */ 33 }; 34 35 static int reg_read(struct i2c_client *client, const u8 reg) 36 { 37 return i2c_smbus_read_byte_data(client, reg); 38 } 39 40 static int reg_write(struct i2c_client *client, const u8 reg, 41 const u8 data) 42 { 43 return i2c_smbus_write_byte_data(client, reg, data); 44 } 45 46 static int reg_set(struct i2c_client *client, const u8 reg, 47 const u8 data, u8 mask) 48 { 49 int ret = reg_read(client, reg); 50 if (ret < 0) 51 return ret; 52 return reg_write(client, reg, (ret & ~mask) | (data & mask)); 53 } 54 55 static struct ak881x *to_ak881x(const struct i2c_client *client) 56 { 57 return container_of(i2c_get_clientdata(client), struct ak881x, subdev); 58 } 59 60 #ifdef CONFIG_VIDEO_ADV_DEBUG 61 static int ak881x_g_register(struct v4l2_subdev *sd, 62 struct v4l2_dbg_register *reg) 63 { 64 struct i2c_client *client = v4l2_get_subdevdata(sd); 65 66 if (reg->reg > 0x26) 67 return -EINVAL; 68 69 reg->size = 1; 70 reg->val = reg_read(client, reg->reg); 71 72 if (reg->val > 0xffff) 73 return -EIO; 74 75 return 0; 76 } 77 78 static int ak881x_s_register(struct v4l2_subdev *sd, 79 const struct v4l2_dbg_register *reg) 80 { 81 struct i2c_client *client = v4l2_get_subdevdata(sd); 82 83 if (reg->reg > 0x26) 84 return -EINVAL; 85 86 if (reg_write(client, reg->reg, reg->val) < 0) 87 return -EIO; 88 89 return 0; 90 } 91 #endif 92 93 static int ak881x_fill_fmt(struct v4l2_subdev *sd, 94 struct v4l2_subdev_state *sd_state, 95 struct v4l2_subdev_format *format) 96 { 97 struct v4l2_mbus_framefmt *mf = &format->format; 98 struct i2c_client *client = v4l2_get_subdevdata(sd); 99 struct ak881x *ak881x = to_ak881x(client); 100 101 if (format->pad) 102 return -EINVAL; 103 104 v4l_bound_align_image(&mf->width, 0, 720, 2, 105 &mf->height, 0, ak881x->lines, 1, 0); 106 mf->field = V4L2_FIELD_INTERLACED; 107 mf->code = MEDIA_BUS_FMT_YUYV8_2X8; 108 mf->colorspace = V4L2_COLORSPACE_SMPTE170M; 109 110 return 0; 111 } 112 113 static int ak881x_enum_mbus_code(struct v4l2_subdev *sd, 114 struct v4l2_subdev_state *sd_state, 115 struct v4l2_subdev_mbus_code_enum *code) 116 { 117 if (code->pad || code->index) 118 return -EINVAL; 119 120 code->code = MEDIA_BUS_FMT_YUYV8_2X8; 121 return 0; 122 } 123 124 static int ak881x_get_selection(struct v4l2_subdev *sd, 125 struct v4l2_subdev_state *sd_state, 126 struct v4l2_subdev_selection *sel) 127 { 128 struct i2c_client *client = v4l2_get_subdevdata(sd); 129 struct ak881x *ak881x = to_ak881x(client); 130 131 if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) 132 return -EINVAL; 133 134 switch (sel->target) { 135 case V4L2_SEL_TGT_CROP_BOUNDS: 136 sel->r.left = 0; 137 sel->r.top = 0; 138 sel->r.width = 720; 139 sel->r.height = ak881x->lines; 140 return 0; 141 default: 142 return -EINVAL; 143 } 144 } 145 146 static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) 147 { 148 struct i2c_client *client = v4l2_get_subdevdata(sd); 149 struct ak881x *ak881x = to_ak881x(client); 150 u8 vp1; 151 152 if (std == V4L2_STD_NTSC_443) { 153 vp1 = 3; 154 ak881x->lines = 480; 155 } else if (std == V4L2_STD_PAL_M) { 156 vp1 = 5; 157 ak881x->lines = 480; 158 } else if (std == V4L2_STD_PAL_60) { 159 vp1 = 7; 160 ak881x->lines = 480; 161 } else if (std & V4L2_STD_NTSC) { 162 vp1 = 0; 163 ak881x->lines = 480; 164 } else if (std & V4L2_STD_PAL) { 165 vp1 = 0xf; 166 ak881x->lines = 576; 167 } else { 168 /* No SECAM or PAL_N/Nc supported */ 169 return -EINVAL; 170 } 171 172 reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf); 173 174 return 0; 175 } 176 177 static int ak881x_s_stream(struct v4l2_subdev *sd, int enable) 178 { 179 struct i2c_client *client = v4l2_get_subdevdata(sd); 180 struct ak881x *ak881x = to_ak881x(client); 181 182 if (enable) { 183 u8 dac; 184 /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */ 185 /* Default: composite output */ 186 if (ak881x->pdata->flags & AK881X_COMPONENT) 187 dac = 3; 188 else 189 dac = 4; 190 /* Turn on the DAC(s) */ 191 reg_write(client, AK881X_DAC_MODE, dac); 192 dev_dbg(&client->dev, "chip status 0x%x\n", 193 reg_read(client, AK881X_STATUS)); 194 } else { 195 /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */ 196 reg_write(client, AK881X_DAC_MODE, 0); 197 dev_dbg(&client->dev, "chip status 0x%x\n", 198 reg_read(client, AK881X_STATUS)); 199 } 200 201 return 0; 202 } 203 204 static const struct v4l2_subdev_core_ops ak881x_subdev_core_ops = { 205 #ifdef CONFIG_VIDEO_ADV_DEBUG 206 .g_register = ak881x_g_register, 207 .s_register = ak881x_s_register, 208 #endif 209 }; 210 211 static const struct v4l2_subdev_video_ops ak881x_subdev_video_ops = { 212 .s_std_output = ak881x_s_std_output, 213 .s_stream = ak881x_s_stream, 214 }; 215 216 static const struct v4l2_subdev_pad_ops ak881x_subdev_pad_ops = { 217 .enum_mbus_code = ak881x_enum_mbus_code, 218 .get_selection = ak881x_get_selection, 219 .set_fmt = ak881x_fill_fmt, 220 .get_fmt = ak881x_fill_fmt, 221 }; 222 223 static const struct v4l2_subdev_ops ak881x_subdev_ops = { 224 .core = &ak881x_subdev_core_ops, 225 .video = &ak881x_subdev_video_ops, 226 .pad = &ak881x_subdev_pad_ops, 227 }; 228 229 static int ak881x_probe(struct i2c_client *client) 230 { 231 struct i2c_adapter *adapter = client->adapter; 232 struct ak881x *ak881x; 233 u8 ifmode, data; 234 235 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { 236 dev_warn(&adapter->dev, 237 "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); 238 return -EIO; 239 } 240 241 ak881x = devm_kzalloc(&client->dev, sizeof(*ak881x), GFP_KERNEL); 242 if (!ak881x) 243 return -ENOMEM; 244 245 v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops); 246 247 data = reg_read(client, AK881X_DEVICE_ID); 248 249 switch (data) { 250 case 0x13: 251 case 0x14: 252 break; 253 default: 254 dev_err(&client->dev, 255 "No ak881x chip detected, register read %x\n", data); 256 return -ENODEV; 257 } 258 259 ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION); 260 ak881x->pdata = client->dev.platform_data; 261 262 if (ak881x->pdata) { 263 if (ak881x->pdata->flags & AK881X_FIELD) 264 ifmode = 4; 265 else 266 ifmode = 0; 267 268 switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) { 269 case AK881X_IF_MODE_BT656: 270 ifmode |= 1; 271 break; 272 case AK881X_IF_MODE_MASTER: 273 ifmode |= 2; 274 break; 275 case AK881X_IF_MODE_SLAVE: 276 default: 277 break; 278 } 279 280 dev_dbg(&client->dev, "IF mode %x\n", ifmode); 281 282 /* 283 * "Line Blanking No." seems to be the same as the number of 284 * "black" lines on, e.g., SuperH VOU, whose default value of 20 285 * "incidentally" matches ak881x' default 286 */ 287 reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3)); 288 } 289 290 /* Hardware default: NTSC-M */ 291 ak881x->lines = 480; 292 293 dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n", 294 data, ak881x->revision); 295 296 return 0; 297 } 298 299 static void ak881x_remove(struct i2c_client *client) 300 { 301 struct ak881x *ak881x = to_ak881x(client); 302 303 v4l2_device_unregister_subdev(&ak881x->subdev); 304 } 305 306 static const struct i2c_device_id ak881x_id[] = { 307 { "ak8813", 0 }, 308 { "ak8814", 0 }, 309 { } 310 }; 311 MODULE_DEVICE_TABLE(i2c, ak881x_id); 312 313 static struct i2c_driver ak881x_i2c_driver = { 314 .driver = { 315 .name = "ak881x", 316 }, 317 .probe = ak881x_probe, 318 .remove = ak881x_remove, 319 .id_table = ak881x_id, 320 }; 321 322 module_i2c_driver(ak881x_i2c_driver); 323 324 MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814"); 325 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); 326 MODULE_LICENSE("GPL v2"); 327