1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for Zarlink DVB-T ZL10353 demodulator 4 * 5 * Copyright (C) 2006, 2007 Christopher Pascoe <c.pascoe@itee.uq.edu.au> 6 */ 7 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/init.h> 11 #include <linux/delay.h> 12 #include <linux/string.h> 13 #include <linux/slab.h> 14 #include <asm/div64.h> 15 16 #include <media/dvb_frontend.h> 17 #include "zl10353_priv.h" 18 #include "zl10353.h" 19 20 struct zl10353_state { 21 struct i2c_adapter *i2c; 22 struct dvb_frontend frontend; 23 24 struct zl10353_config config; 25 26 u32 bandwidth; 27 u32 ucblocks; 28 u32 frequency; 29 }; 30 31 static int debug; 32 #define dprintk(args...) \ 33 do { \ 34 if (debug) printk(KERN_DEBUG "zl10353: " args); \ 35 } while (0) 36 37 static int debug_regs; 38 39 static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val) 40 { 41 struct zl10353_state *state = fe->demodulator_priv; 42 u8 buf[2] = { reg, val }; 43 struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0, 44 .buf = buf, .len = 2 }; 45 int err = i2c_transfer(state->i2c, &msg, 1); 46 if (err != 1) { 47 printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err); 48 return err; 49 } 50 return 0; 51 } 52 53 static int zl10353_write(struct dvb_frontend *fe, const u8 ibuf[], int ilen) 54 { 55 int err, i; 56 for (i = 0; i < ilen - 1; i++) 57 if ((err = zl10353_single_write(fe, ibuf[0] + i, ibuf[i + 1]))) 58 return err; 59 60 return 0; 61 } 62 63 static int zl10353_read_register(struct zl10353_state *state, u8 reg) 64 { 65 int ret; 66 u8 b0[1] = { reg }; 67 u8 b1[1] = { 0 }; 68 struct i2c_msg msg[2] = { { .addr = state->config.demod_address, 69 .flags = 0, 70 .buf = b0, .len = 1 }, 71 { .addr = state->config.demod_address, 72 .flags = I2C_M_RD, 73 .buf = b1, .len = 1 } }; 74 75 ret = i2c_transfer(state->i2c, msg, 2); 76 77 if (ret != 2) { 78 printk("%s: readreg error (reg=%d, ret==%i)\n", 79 __func__, reg, ret); 80 return ret; 81 } 82 83 return b1[0]; 84 } 85 86 static void zl10353_dump_regs(struct dvb_frontend *fe) 87 { 88 struct zl10353_state *state = fe->demodulator_priv; 89 int ret; 90 u8 reg; 91 92 /* Dump all registers. */ 93 for (reg = 0; ; reg++) { 94 if (reg % 16 == 0) { 95 if (reg) 96 printk(KERN_CONT "\n"); 97 printk(KERN_DEBUG "%02x:", reg); 98 } 99 ret = zl10353_read_register(state, reg); 100 if (ret >= 0) 101 printk(KERN_CONT " %02x", (u8)ret); 102 else 103 printk(KERN_CONT " --"); 104 if (reg == 0xff) 105 break; 106 } 107 printk(KERN_CONT "\n"); 108 } 109 110 static void zl10353_calc_nominal_rate(struct dvb_frontend *fe, 111 u32 bandwidth, 112 u16 *nominal_rate) 113 { 114 struct zl10353_state *state = fe->demodulator_priv; 115 u32 adc_clock = 450560; /* 45.056 MHz */ 116 u64 value; 117 u8 bw = bandwidth / 1000000; 118 119 if (state->config.adc_clock) 120 adc_clock = state->config.adc_clock; 121 122 value = (u64)10 * (1 << 23) / 7 * 125; 123 value = (bw * value) + adc_clock / 2; 124 *nominal_rate = div_u64(value, adc_clock); 125 126 dprintk("%s: bw %d, adc_clock %d => 0x%x\n", 127 __func__, bw, adc_clock, *nominal_rate); 128 } 129 130 static void zl10353_calc_input_freq(struct dvb_frontend *fe, 131 u16 *input_freq) 132 { 133 struct zl10353_state *state = fe->demodulator_priv; 134 u32 adc_clock = 450560; /* 45.056 MHz */ 135 int if2 = 361667; /* 36.1667 MHz */ 136 int ife; 137 u64 value; 138 139 if (state->config.adc_clock) 140 adc_clock = state->config.adc_clock; 141 if (state->config.if2) 142 if2 = state->config.if2; 143 144 if (adc_clock >= if2 * 2) 145 ife = if2; 146 else { 147 ife = adc_clock - (if2 % adc_clock); 148 if (ife > adc_clock / 2) 149 ife = adc_clock - ife; 150 } 151 value = div_u64((u64)65536 * ife + adc_clock / 2, adc_clock); 152 *input_freq = -value; 153 154 dprintk("%s: if2 %d, ife %d, adc_clock %d => %d / 0x%x\n", 155 __func__, if2, ife, adc_clock, -(int)value, *input_freq); 156 } 157 158 static int zl10353_sleep(struct dvb_frontend *fe) 159 { 160 static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 }; 161 162 zl10353_write(fe, zl10353_softdown, sizeof(zl10353_softdown)); 163 return 0; 164 } 165 166 static int zl10353_set_parameters(struct dvb_frontend *fe) 167 { 168 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 169 struct zl10353_state *state = fe->demodulator_priv; 170 u16 nominal_rate, input_freq; 171 u8 pllbuf[6] = { 0x67 }, acq_ctl = 0; 172 u16 tps = 0; 173 174 state->frequency = c->frequency; 175 176 zl10353_single_write(fe, RESET, 0x80); 177 udelay(200); 178 zl10353_single_write(fe, 0xEA, 0x01); 179 udelay(200); 180 zl10353_single_write(fe, 0xEA, 0x00); 181 182 zl10353_single_write(fe, AGC_TARGET, 0x28); 183 184 if (c->transmission_mode != TRANSMISSION_MODE_AUTO) 185 acq_ctl |= (1 << 0); 186 if (c->guard_interval != GUARD_INTERVAL_AUTO) 187 acq_ctl |= (1 << 1); 188 zl10353_single_write(fe, ACQ_CTL, acq_ctl); 189 190 switch (c->bandwidth_hz) { 191 case 6000000: 192 /* These are extrapolated from the 7 and 8MHz values */ 193 zl10353_single_write(fe, MCLK_RATIO, 0x97); 194 zl10353_single_write(fe, 0x64, 0x34); 195 zl10353_single_write(fe, 0xcc, 0xdd); 196 break; 197 case 7000000: 198 zl10353_single_write(fe, MCLK_RATIO, 0x86); 199 zl10353_single_write(fe, 0x64, 0x35); 200 zl10353_single_write(fe, 0xcc, 0x73); 201 break; 202 default: 203 c->bandwidth_hz = 8000000; 204 /* fall through */ 205 case 8000000: 206 zl10353_single_write(fe, MCLK_RATIO, 0x75); 207 zl10353_single_write(fe, 0x64, 0x36); 208 zl10353_single_write(fe, 0xcc, 0x73); 209 } 210 211 zl10353_calc_nominal_rate(fe, c->bandwidth_hz, &nominal_rate); 212 zl10353_single_write(fe, TRL_NOMINAL_RATE_1, msb(nominal_rate)); 213 zl10353_single_write(fe, TRL_NOMINAL_RATE_0, lsb(nominal_rate)); 214 state->bandwidth = c->bandwidth_hz; 215 216 zl10353_calc_input_freq(fe, &input_freq); 217 zl10353_single_write(fe, INPUT_FREQ_1, msb(input_freq)); 218 zl10353_single_write(fe, INPUT_FREQ_0, lsb(input_freq)); 219 220 /* Hint at TPS settings */ 221 switch (c->code_rate_HP) { 222 case FEC_2_3: 223 tps |= (1 << 7); 224 break; 225 case FEC_3_4: 226 tps |= (2 << 7); 227 break; 228 case FEC_5_6: 229 tps |= (3 << 7); 230 break; 231 case FEC_7_8: 232 tps |= (4 << 7); 233 break; 234 case FEC_1_2: 235 case FEC_AUTO: 236 break; 237 default: 238 return -EINVAL; 239 } 240 241 switch (c->code_rate_LP) { 242 case FEC_2_3: 243 tps |= (1 << 4); 244 break; 245 case FEC_3_4: 246 tps |= (2 << 4); 247 break; 248 case FEC_5_6: 249 tps |= (3 << 4); 250 break; 251 case FEC_7_8: 252 tps |= (4 << 4); 253 break; 254 case FEC_1_2: 255 case FEC_AUTO: 256 break; 257 case FEC_NONE: 258 if (c->hierarchy == HIERARCHY_AUTO || 259 c->hierarchy == HIERARCHY_NONE) 260 break; 261 /* fall through */ 262 default: 263 return -EINVAL; 264 } 265 266 switch (c->modulation) { 267 case QPSK: 268 break; 269 case QAM_AUTO: 270 case QAM_16: 271 tps |= (1 << 13); 272 break; 273 case QAM_64: 274 tps |= (2 << 13); 275 break; 276 default: 277 return -EINVAL; 278 } 279 280 switch (c->transmission_mode) { 281 case TRANSMISSION_MODE_2K: 282 case TRANSMISSION_MODE_AUTO: 283 break; 284 case TRANSMISSION_MODE_8K: 285 tps |= (1 << 0); 286 break; 287 default: 288 return -EINVAL; 289 } 290 291 switch (c->guard_interval) { 292 case GUARD_INTERVAL_1_32: 293 case GUARD_INTERVAL_AUTO: 294 break; 295 case GUARD_INTERVAL_1_16: 296 tps |= (1 << 2); 297 break; 298 case GUARD_INTERVAL_1_8: 299 tps |= (2 << 2); 300 break; 301 case GUARD_INTERVAL_1_4: 302 tps |= (3 << 2); 303 break; 304 default: 305 return -EINVAL; 306 } 307 308 switch (c->hierarchy) { 309 case HIERARCHY_AUTO: 310 case HIERARCHY_NONE: 311 break; 312 case HIERARCHY_1: 313 tps |= (1 << 10); 314 break; 315 case HIERARCHY_2: 316 tps |= (2 << 10); 317 break; 318 case HIERARCHY_4: 319 tps |= (3 << 10); 320 break; 321 default: 322 return -EINVAL; 323 } 324 325 zl10353_single_write(fe, TPS_GIVEN_1, msb(tps)); 326 zl10353_single_write(fe, TPS_GIVEN_0, lsb(tps)); 327 328 if (fe->ops.i2c_gate_ctrl) 329 fe->ops.i2c_gate_ctrl(fe, 0); 330 331 /* 332 * If there is no tuner attached to the secondary I2C bus, we call 333 * set_params to program a potential tuner attached somewhere else. 334 * Otherwise, we update the PLL registers via calc_regs. 335 */ 336 if (state->config.no_tuner) { 337 if (fe->ops.tuner_ops.set_params) { 338 fe->ops.tuner_ops.set_params(fe); 339 if (fe->ops.i2c_gate_ctrl) 340 fe->ops.i2c_gate_ctrl(fe, 0); 341 } 342 } else if (fe->ops.tuner_ops.calc_regs) { 343 fe->ops.tuner_ops.calc_regs(fe, pllbuf + 1, 5); 344 pllbuf[1] <<= 1; 345 zl10353_write(fe, pllbuf, sizeof(pllbuf)); 346 } 347 348 zl10353_single_write(fe, 0x5F, 0x13); 349 350 /* If no attached tuner or invalid PLL registers, just start the FSM. */ 351 if (state->config.no_tuner || fe->ops.tuner_ops.calc_regs == NULL) 352 zl10353_single_write(fe, FSM_GO, 0x01); 353 else 354 zl10353_single_write(fe, TUNER_GO, 0x01); 355 356 return 0; 357 } 358 359 static int zl10353_get_parameters(struct dvb_frontend *fe, 360 struct dtv_frontend_properties *c) 361 { 362 struct zl10353_state *state = fe->demodulator_priv; 363 int s6, s9; 364 u16 tps; 365 static const u8 tps_fec_to_api[8] = { 366 FEC_1_2, 367 FEC_2_3, 368 FEC_3_4, 369 FEC_5_6, 370 FEC_7_8, 371 FEC_AUTO, 372 FEC_AUTO, 373 FEC_AUTO 374 }; 375 376 s6 = zl10353_read_register(state, STATUS_6); 377 s9 = zl10353_read_register(state, STATUS_9); 378 if (s6 < 0 || s9 < 0) 379 return -EREMOTEIO; 380 if ((s6 & (1 << 5)) == 0 || (s9 & (1 << 4)) == 0) 381 return -EINVAL; /* no FE or TPS lock */ 382 383 tps = zl10353_read_register(state, TPS_RECEIVED_1) << 8 | 384 zl10353_read_register(state, TPS_RECEIVED_0); 385 386 c->code_rate_HP = tps_fec_to_api[(tps >> 7) & 7]; 387 c->code_rate_LP = tps_fec_to_api[(tps >> 4) & 7]; 388 389 switch ((tps >> 13) & 3) { 390 case 0: 391 c->modulation = QPSK; 392 break; 393 case 1: 394 c->modulation = QAM_16; 395 break; 396 case 2: 397 c->modulation = QAM_64; 398 break; 399 default: 400 c->modulation = QAM_AUTO; 401 break; 402 } 403 404 c->transmission_mode = (tps & 0x01) ? TRANSMISSION_MODE_8K : 405 TRANSMISSION_MODE_2K; 406 407 switch ((tps >> 2) & 3) { 408 case 0: 409 c->guard_interval = GUARD_INTERVAL_1_32; 410 break; 411 case 1: 412 c->guard_interval = GUARD_INTERVAL_1_16; 413 break; 414 case 2: 415 c->guard_interval = GUARD_INTERVAL_1_8; 416 break; 417 case 3: 418 c->guard_interval = GUARD_INTERVAL_1_4; 419 break; 420 default: 421 c->guard_interval = GUARD_INTERVAL_AUTO; 422 break; 423 } 424 425 switch ((tps >> 10) & 7) { 426 case 0: 427 c->hierarchy = HIERARCHY_NONE; 428 break; 429 case 1: 430 c->hierarchy = HIERARCHY_1; 431 break; 432 case 2: 433 c->hierarchy = HIERARCHY_2; 434 break; 435 case 3: 436 c->hierarchy = HIERARCHY_4; 437 break; 438 default: 439 c->hierarchy = HIERARCHY_AUTO; 440 break; 441 } 442 443 c->frequency = state->frequency; 444 c->bandwidth_hz = state->bandwidth; 445 c->inversion = INVERSION_AUTO; 446 447 return 0; 448 } 449 450 static int zl10353_read_status(struct dvb_frontend *fe, enum fe_status *status) 451 { 452 struct zl10353_state *state = fe->demodulator_priv; 453 int s6, s7, s8; 454 455 if ((s6 = zl10353_read_register(state, STATUS_6)) < 0) 456 return -EREMOTEIO; 457 if ((s7 = zl10353_read_register(state, STATUS_7)) < 0) 458 return -EREMOTEIO; 459 if ((s8 = zl10353_read_register(state, STATUS_8)) < 0) 460 return -EREMOTEIO; 461 462 *status = 0; 463 if (s6 & (1 << 2)) 464 *status |= FE_HAS_CARRIER; 465 if (s6 & (1 << 1)) 466 *status |= FE_HAS_VITERBI; 467 if (s6 & (1 << 5)) 468 *status |= FE_HAS_LOCK; 469 if (s7 & (1 << 4)) 470 *status |= FE_HAS_SYNC; 471 if (s8 & (1 << 6)) 472 *status |= FE_HAS_SIGNAL; 473 474 if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != 475 (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) 476 *status &= ~FE_HAS_LOCK; 477 478 return 0; 479 } 480 481 static int zl10353_read_ber(struct dvb_frontend *fe, u32 *ber) 482 { 483 struct zl10353_state *state = fe->demodulator_priv; 484 485 *ber = zl10353_read_register(state, RS_ERR_CNT_2) << 16 | 486 zl10353_read_register(state, RS_ERR_CNT_1) << 8 | 487 zl10353_read_register(state, RS_ERR_CNT_0); 488 489 return 0; 490 } 491 492 static int zl10353_read_signal_strength(struct dvb_frontend *fe, u16 *strength) 493 { 494 struct zl10353_state *state = fe->demodulator_priv; 495 496 u16 signal = zl10353_read_register(state, AGC_GAIN_1) << 10 | 497 zl10353_read_register(state, AGC_GAIN_0) << 2 | 3; 498 499 *strength = ~signal; 500 501 return 0; 502 } 503 504 static int zl10353_read_snr(struct dvb_frontend *fe, u16 *snr) 505 { 506 struct zl10353_state *state = fe->demodulator_priv; 507 u8 _snr; 508 509 if (debug_regs) 510 zl10353_dump_regs(fe); 511 512 _snr = zl10353_read_register(state, SNR); 513 *snr = 10 * _snr / 8; 514 515 return 0; 516 } 517 518 static int zl10353_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) 519 { 520 struct zl10353_state *state = fe->demodulator_priv; 521 u32 ubl = 0; 522 523 ubl = zl10353_read_register(state, RS_UBC_1) << 8 | 524 zl10353_read_register(state, RS_UBC_0); 525 526 state->ucblocks += ubl; 527 *ucblocks = state->ucblocks; 528 529 return 0; 530 } 531 532 static int zl10353_get_tune_settings(struct dvb_frontend *fe, 533 struct dvb_frontend_tune_settings 534 *fe_tune_settings) 535 { 536 fe_tune_settings->min_delay_ms = 1000; 537 fe_tune_settings->step_size = 0; 538 fe_tune_settings->max_drift = 0; 539 540 return 0; 541 } 542 543 static int zl10353_init(struct dvb_frontend *fe) 544 { 545 struct zl10353_state *state = fe->demodulator_priv; 546 u8 zl10353_reset_attach[6] = { 0x50, 0x03, 0x64, 0x46, 0x15, 0x0F }; 547 548 if (debug_regs) 549 zl10353_dump_regs(fe); 550 if (state->config.parallel_ts) 551 zl10353_reset_attach[2] &= ~0x20; 552 if (state->config.clock_ctl_1) 553 zl10353_reset_attach[3] = state->config.clock_ctl_1; 554 if (state->config.pll_0) 555 zl10353_reset_attach[4] = state->config.pll_0; 556 557 /* Do a "hard" reset if not already done */ 558 if (zl10353_read_register(state, 0x50) != zl10353_reset_attach[1] || 559 zl10353_read_register(state, 0x51) != zl10353_reset_attach[2]) { 560 zl10353_write(fe, zl10353_reset_attach, 561 sizeof(zl10353_reset_attach)); 562 if (debug_regs) 563 zl10353_dump_regs(fe); 564 } 565 566 return 0; 567 } 568 569 static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) 570 { 571 struct zl10353_state *state = fe->demodulator_priv; 572 u8 val = 0x0a; 573 574 if (state->config.disable_i2c_gate_ctrl) { 575 /* No tuner attached to the internal I2C bus */ 576 /* If set enable I2C bridge, the main I2C bus stopped hardly */ 577 return 0; 578 } 579 580 if (enable) 581 val |= 0x10; 582 583 return zl10353_single_write(fe, 0x62, val); 584 } 585 586 static void zl10353_release(struct dvb_frontend *fe) 587 { 588 struct zl10353_state *state = fe->demodulator_priv; 589 kfree(state); 590 } 591 592 static const struct dvb_frontend_ops zl10353_ops; 593 594 struct dvb_frontend *zl10353_attach(const struct zl10353_config *config, 595 struct i2c_adapter *i2c) 596 { 597 struct zl10353_state *state = NULL; 598 int id; 599 600 /* allocate memory for the internal state */ 601 state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL); 602 if (state == NULL) 603 goto error; 604 605 /* setup the state */ 606 state->i2c = i2c; 607 memcpy(&state->config, config, sizeof(struct zl10353_config)); 608 609 /* check if the demod is there */ 610 id = zl10353_read_register(state, CHIP_ID); 611 if ((id != ID_ZL10353) && (id != ID_CE6230) && (id != ID_CE6231)) 612 goto error; 613 614 /* create dvb_frontend */ 615 memcpy(&state->frontend.ops, &zl10353_ops, sizeof(struct dvb_frontend_ops)); 616 state->frontend.demodulator_priv = state; 617 618 return &state->frontend; 619 error: 620 kfree(state); 621 return NULL; 622 } 623 624 static const struct dvb_frontend_ops zl10353_ops = { 625 .delsys = { SYS_DVBT }, 626 .info = { 627 .name = "Zarlink ZL10353 DVB-T", 628 .frequency_min_hz = 174 * MHz, 629 .frequency_max_hz = 862 * MHz, 630 .frequency_stepsize_hz = 166667, 631 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | 632 FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | 633 FE_CAN_FEC_AUTO | 634 FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | 635 FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | 636 FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER | 637 FE_CAN_MUTE_TS 638 }, 639 640 .release = zl10353_release, 641 642 .init = zl10353_init, 643 .sleep = zl10353_sleep, 644 .i2c_gate_ctrl = zl10353_i2c_gate_ctrl, 645 .write = zl10353_write, 646 647 .set_frontend = zl10353_set_parameters, 648 .get_frontend = zl10353_get_parameters, 649 .get_tune_settings = zl10353_get_tune_settings, 650 651 .read_status = zl10353_read_status, 652 .read_ber = zl10353_read_ber, 653 .read_signal_strength = zl10353_read_signal_strength, 654 .read_snr = zl10353_read_snr, 655 .read_ucblocks = zl10353_read_ucblocks, 656 }; 657 658 module_param(debug, int, 0644); 659 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); 660 661 module_param(debug_regs, int, 0644); 662 MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off)."); 663 664 MODULE_DESCRIPTION("Zarlink ZL10353 DVB-T demodulator driver"); 665 MODULE_AUTHOR("Chris Pascoe"); 666 MODULE_LICENSE("GPL"); 667 668 EXPORT_SYMBOL(zl10353_attach); 669