1 /* 2 * Driver for Zarlink zl10036 DVB-S silicon tuner 3 * 4 * Copyright (C) 2006 Tino Reichardt 5 * Copyright (C) 2007-2009 Matthias Schwarzott <zzam@gentoo.de> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License Version 2, as 9 * published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 ** 17 * The data sheet for this tuner can be found at: 18 * http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf 19 * 20 * This one is working: (at my Avermedia DVB-S Pro) 21 * - zl10036 (40pin, FTA) 22 * 23 * A driver for zl10038 should be very similar. 24 */ 25 26 #include <linux/module.h> 27 #include <linux/dvb/frontend.h> 28 #include <linux/slab.h> 29 #include <linux/types.h> 30 31 #include "zl10036.h" 32 33 static int zl10036_debug; 34 #define dprintk(level, args...) \ 35 do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \ 36 } while (0) 37 38 #define deb_info(args...) dprintk(0x01, args) 39 #define deb_i2c(args...) dprintk(0x02, args) 40 41 struct zl10036_state { 42 struct i2c_adapter *i2c; 43 const struct zl10036_config *config; 44 u32 frequency; 45 u8 br, bf; 46 }; 47 48 49 /* This driver assumes the tuner is driven by a 10.111MHz Cristal */ 50 #define _XTAL 10111 51 52 /* Some of the possible dividers: 53 * 64, (write 0x05 to reg), freq step size 158kHz 54 * 10, (write 0x0a to reg), freq step size 1.011kHz (used here) 55 * 5, (write 0x09 to reg), freq step size 2.022kHz 56 */ 57 58 #define _RDIV 10 59 #define _RDIV_REG 0x0a 60 #define _FR (_XTAL/_RDIV) 61 62 #define STATUS_POR 0x80 /* Power on Reset */ 63 #define STATUS_FL 0x40 /* Frequency & Phase Lock */ 64 65 /* read/write for zl10036 and zl10038 */ 66 67 static int zl10036_read_status_reg(struct zl10036_state *state) 68 { 69 u8 status; 70 struct i2c_msg msg[1] = { 71 { .addr = state->config->tuner_address, .flags = I2C_M_RD, 72 .buf = &status, .len = sizeof(status) }, 73 }; 74 75 if (i2c_transfer(state->i2c, msg, 1) != 1) { 76 printk(KERN_ERR "%s: i2c read failed at addr=%02x\n", 77 __func__, state->config->tuner_address); 78 return -EIO; 79 } 80 81 deb_i2c("R(status): %02x [FL=%d]\n", status, 82 (status & STATUS_FL) ? 1 : 0); 83 if (status & STATUS_POR) 84 deb_info("%s: Power-On-Reset bit enabled - need to initialize the tuner\n", 85 __func__); 86 87 return status; 88 } 89 90 static int zl10036_write(struct zl10036_state *state, u8 buf[], u8 count) 91 { 92 struct i2c_msg msg[1] = { 93 { .addr = state->config->tuner_address, .flags = 0, 94 .buf = buf, .len = count }, 95 }; 96 u8 reg = 0; 97 int ret; 98 99 if (zl10036_debug & 0x02) { 100 /* every 8bit-value satisifes this! 101 * so only check for debug log */ 102 if ((buf[0] & 0x80) == 0x00) 103 reg = 2; 104 else if ((buf[0] & 0xc0) == 0x80) 105 reg = 4; 106 else if ((buf[0] & 0xf0) == 0xc0) 107 reg = 6; 108 else if ((buf[0] & 0xf0) == 0xd0) 109 reg = 8; 110 else if ((buf[0] & 0xf0) == 0xe0) 111 reg = 10; 112 else if ((buf[0] & 0xf0) == 0xf0) 113 reg = 12; 114 115 deb_i2c("W(%d):", reg); 116 { 117 int i; 118 for (i = 0; i < count; i++) 119 printk(KERN_CONT " %02x", buf[i]); 120 printk(KERN_CONT "\n"); 121 } 122 } 123 124 ret = i2c_transfer(state->i2c, msg, 1); 125 if (ret != 1) { 126 printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret); 127 return -EIO; 128 } 129 130 return 0; 131 } 132 133 static void zl10036_release(struct dvb_frontend *fe) 134 { 135 struct zl10036_state *state = fe->tuner_priv; 136 137 fe->tuner_priv = NULL; 138 kfree(state); 139 } 140 141 static int zl10036_sleep(struct dvb_frontend *fe) 142 { 143 struct zl10036_state *state = fe->tuner_priv; 144 u8 buf[] = { 0xf0, 0x80 }; /* regs 12/13 */ 145 int ret; 146 147 deb_info("%s\n", __func__); 148 149 if (fe->ops.i2c_gate_ctrl) 150 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 151 152 ret = zl10036_write(state, buf, sizeof(buf)); 153 154 if (fe->ops.i2c_gate_ctrl) 155 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ 156 157 return ret; 158 } 159 160 /* 161 * register map of the ZL10036/ZL10038 162 * 163 * reg[default] content 164 * 2[0x00]: 0 | N14 | N13 | N12 | N11 | N10 | N9 | N8 165 * 3[0x00]: N7 | N6 | N5 | N4 | N3 | N2 | N1 | N0 166 * 4[0x80]: 1 | 0 | RFG | BA1 | BA0 | BG1 | BG0 | LEN 167 * 5[0x00]: P0 | C1 | C0 | R4 | R3 | R2 | R1 | R0 168 * 6[0xc0]: 1 | 1 | 0 | 0 | RSD | 0 | 0 | 0 169 * 7[0x20]: P1 | BF6 | BF5 | BF4 | BF3 | BF2 | BF1 | 0 170 * 8[0xdb]: 1 | 1 | 0 | 1 | 0 | CC | 1 | 1 171 * 9[0x30]: VSD | V2 | V1 | V0 | S3 | S2 | S1 | S0 172 * 10[0xe1]: 1 | 1 | 1 | 0 | 0 | LS2 | LS1 | LS0 173 * 11[0xf5]: WS | WH2 | WH1 | WH0 | WL2 | WL1 | WL0 | WRE 174 * 12[0xf0]: 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 175 * 13[0x28]: PD | BR4 | BR3 | BR2 | BR1 | BR0 | CLR | TL 176 */ 177 178 static int zl10036_set_frequency(struct zl10036_state *state, u32 frequency) 179 { 180 u8 buf[2]; 181 u32 div, foffset; 182 183 div = (frequency + _FR/2) / _FR; 184 state->frequency = div * _FR; 185 186 foffset = frequency - state->frequency; 187 188 buf[0] = (div >> 8) & 0x7f; 189 buf[1] = (div >> 0) & 0xff; 190 191 deb_info("%s: ftodo=%u fpriv=%u ferr=%d div=%u\n", __func__, 192 frequency, state->frequency, foffset, div); 193 194 return zl10036_write(state, buf, sizeof(buf)); 195 } 196 197 static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw) 198 { 199 /* fbw is measured in kHz */ 200 u8 br, bf; 201 int ret; 202 u8 buf_bf[] = { 203 0xc0, 0x00, /* 6/7: rsd=0 bf=0 */ 204 }; 205 u8 buf_br[] = { 206 0xf0, 0x00, /* 12/13: br=0xa clr=0 tl=0*/ 207 }; 208 u8 zl10036_rsd_off[] = { 0xc8 }; /* set RSD=1 */ 209 210 /* ensure correct values */ 211 if (fbw > 35000) 212 fbw = 35000; 213 if (fbw < 8000) 214 fbw = 8000; 215 216 #define _BR_MAXIMUM (_XTAL/575) /* _XTAL / 575kHz = 17 */ 217 218 /* <= 28,82 MHz */ 219 if (fbw <= 28820) { 220 br = _BR_MAXIMUM; 221 } else { 222 /* 223 * f(bw)=34,6MHz f(xtal)=10.111MHz 224 * br = (10111/34600) * 63 * 1/K = 14; 225 */ 226 br = ((_XTAL * 21 * 1000) / (fbw * 419)); 227 } 228 229 /* ensure correct values */ 230 if (br < 4) 231 br = 4; 232 if (br > _BR_MAXIMUM) 233 br = _BR_MAXIMUM; 234 235 /* 236 * k = 1.257 237 * bf = fbw/_XTAL * br * k - 1 */ 238 239 bf = (fbw * br * 1257) / (_XTAL * 1000) - 1; 240 241 /* ensure correct values */ 242 if (bf > 62) 243 bf = 62; 244 245 buf_bf[1] = (bf << 1) & 0x7e; 246 buf_br[1] = (br << 2) & 0x7c; 247 deb_info("%s: BW=%d br=%u bf=%u\n", __func__, fbw, br, bf); 248 249 if (br != state->br) { 250 ret = zl10036_write(state, buf_br, sizeof(buf_br)); 251 if (ret < 0) 252 return ret; 253 } 254 255 if (bf != state->bf) { 256 ret = zl10036_write(state, buf_bf, sizeof(buf_bf)); 257 if (ret < 0) 258 return ret; 259 260 /* time = br/(32* fxtal) */ 261 /* minimal sleep time to be calculated 262 * maximum br is 63 -> max time = 2 /10 MHz = 2e-7 */ 263 msleep(1); 264 265 ret = zl10036_write(state, zl10036_rsd_off, 266 sizeof(zl10036_rsd_off)); 267 if (ret < 0) 268 return ret; 269 } 270 271 state->br = br; 272 state->bf = bf; 273 274 return 0; 275 } 276 277 static int zl10036_set_gain_params(struct zl10036_state *state, 278 int c) 279 { 280 u8 buf[2]; 281 u8 rfg, ba, bg; 282 283 /* default values */ 284 rfg = 0; /* enable when using an lna */ 285 ba = 1; 286 bg = 1; 287 288 /* reg 4 */ 289 buf[0] = 0x80 | ((rfg << 5) & 0x20) 290 | ((ba << 3) & 0x18) | ((bg << 1) & 0x06); 291 292 if (!state->config->rf_loop_enable) 293 buf[0] |= 0x01; 294 295 /* P0=0 */ 296 buf[1] = _RDIV_REG | ((c << 5) & 0x60); 297 298 deb_info("%s: c=%u rfg=%u ba=%u bg=%u\n", __func__, c, rfg, ba, bg); 299 return zl10036_write(state, buf, sizeof(buf)); 300 } 301 302 static int zl10036_set_params(struct dvb_frontend *fe) 303 { 304 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 305 struct zl10036_state *state = fe->tuner_priv; 306 int ret = 0; 307 u32 frequency = p->frequency; 308 u32 fbw; 309 int i; 310 u8 c; 311 312 /* ensure correct values 313 * maybe redundant as core already checks this */ 314 if ((frequency < fe->ops.info.frequency_min_hz / kHz) 315 || (frequency > fe->ops.info.frequency_max_hz / kHz)) 316 return -EINVAL; 317 318 /* 319 * alpha = 1.35 for dvb-s 320 * fBW = (alpha*symbolrate)/(2*0.8) 321 * 1.35 / (2*0.8) = 27 / 32 322 */ 323 fbw = (27 * p->symbol_rate) / 32; 324 325 /* scale to kHz */ 326 fbw /= 1000; 327 328 /* Add safe margin of 3MHz */ 329 fbw += 3000; 330 331 /* setting the charge pump - guessed values */ 332 if (frequency < 950000) 333 return -EINVAL; 334 else if (frequency < 1250000) 335 c = 0; 336 else if (frequency < 1750000) 337 c = 1; 338 else if (frequency < 2175000) 339 c = 2; 340 else 341 return -EINVAL; 342 343 if (fe->ops.i2c_gate_ctrl) 344 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 345 346 ret = zl10036_set_gain_params(state, c); 347 if (ret < 0) 348 goto error; 349 350 ret = zl10036_set_frequency(state, p->frequency); 351 if (ret < 0) 352 goto error; 353 354 ret = zl10036_set_bandwidth(state, fbw); 355 if (ret < 0) 356 goto error; 357 358 /* wait for tuner lock - no idea if this is really needed */ 359 for (i = 0; i < 20; i++) { 360 ret = zl10036_read_status_reg(state); 361 if (ret < 0) 362 goto error; 363 364 /* check Frequency & Phase Lock Bit */ 365 if (ret & STATUS_FL) 366 break; 367 368 msleep(10); 369 } 370 371 error: 372 if (fe->ops.i2c_gate_ctrl) 373 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ 374 375 return ret; 376 } 377 378 static int zl10036_get_frequency(struct dvb_frontend *fe, u32 *frequency) 379 { 380 struct zl10036_state *state = fe->tuner_priv; 381 382 *frequency = state->frequency; 383 384 return 0; 385 } 386 387 static int zl10036_init_regs(struct zl10036_state *state) 388 { 389 int ret; 390 int i; 391 392 /* could also be one block from reg 2 to 13 and additional 10/11 */ 393 u8 zl10036_init_tab[][2] = { 394 { 0x04, 0x00 }, /* 2/3: div=0x400 - arbitrary value */ 395 { 0x8b, _RDIV_REG }, /* 4/5: rfg=0 ba=1 bg=1 len=? */ 396 /* p0=0 c=0 r=_RDIV_REG */ 397 { 0xc0, 0x20 }, /* 6/7: rsd=0 bf=0x10 */ 398 { 0xd3, 0x40 }, /* 8/9: from datasheet */ 399 { 0xe3, 0x5b }, /* 10/11: lock window level */ 400 { 0xf0, 0x28 }, /* 12/13: br=0xa clr=0 tl=0*/ 401 { 0xe3, 0xf9 }, /* 10/11: unlock window level */ 402 }; 403 404 /* invalid values to trigger writing */ 405 state->br = 0xff; 406 state->bf = 0xff; 407 408 if (!state->config->rf_loop_enable) 409 zl10036_init_tab[1][0] |= 0x01; 410 411 deb_info("%s\n", __func__); 412 413 for (i = 0; i < ARRAY_SIZE(zl10036_init_tab); i++) { 414 ret = zl10036_write(state, zl10036_init_tab[i], 2); 415 if (ret < 0) 416 return ret; 417 } 418 419 return 0; 420 } 421 422 static int zl10036_init(struct dvb_frontend *fe) 423 { 424 struct zl10036_state *state = fe->tuner_priv; 425 int ret = 0; 426 427 if (fe->ops.i2c_gate_ctrl) 428 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 429 430 ret = zl10036_read_status_reg(state); 431 if (ret < 0) 432 return ret; 433 434 /* Only init if Power-on-Reset bit is set? */ 435 ret = zl10036_init_regs(state); 436 437 if (fe->ops.i2c_gate_ctrl) 438 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ 439 440 return ret; 441 } 442 443 static const struct dvb_tuner_ops zl10036_tuner_ops = { 444 .info = { 445 .name = "Zarlink ZL10036", 446 .frequency_min_hz = 950 * MHz, 447 .frequency_max_hz = 2175 * MHz 448 }, 449 .init = zl10036_init, 450 .release = zl10036_release, 451 .sleep = zl10036_sleep, 452 .set_params = zl10036_set_params, 453 .get_frequency = zl10036_get_frequency, 454 }; 455 456 struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe, 457 const struct zl10036_config *config, 458 struct i2c_adapter *i2c) 459 { 460 struct zl10036_state *state; 461 int ret; 462 463 if (!config) { 464 printk(KERN_ERR "%s: no config specified", __func__); 465 return NULL; 466 } 467 468 state = kzalloc(sizeof(struct zl10036_state), GFP_KERNEL); 469 if (!state) 470 return NULL; 471 472 state->config = config; 473 state->i2c = i2c; 474 475 if (fe->ops.i2c_gate_ctrl) 476 fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */ 477 478 ret = zl10036_read_status_reg(state); 479 if (ret < 0) { 480 printk(KERN_ERR "%s: No zl10036 found\n", __func__); 481 goto error; 482 } 483 484 ret = zl10036_init_regs(state); 485 if (ret < 0) { 486 printk(KERN_ERR "%s: tuner initialization failed\n", 487 __func__); 488 goto error; 489 } 490 491 if (fe->ops.i2c_gate_ctrl) 492 fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */ 493 494 fe->tuner_priv = state; 495 496 memcpy(&fe->ops.tuner_ops, &zl10036_tuner_ops, 497 sizeof(struct dvb_tuner_ops)); 498 printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n", 499 __func__, fe->ops.tuner_ops.info.name, config->tuner_address); 500 501 return fe; 502 503 error: 504 kfree(state); 505 return NULL; 506 } 507 EXPORT_SYMBOL(zl10036_attach); 508 509 module_param_named(debug, zl10036_debug, int, 0644); 510 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); 511 MODULE_DESCRIPTION("DVB ZL10036 driver"); 512 MODULE_AUTHOR("Tino Reichardt"); 513 MODULE_AUTHOR("Matthias Schwarzott"); 514 MODULE_LICENSE("GPL"); 515