1 /*
2     TDA10021  - Single Chip Cable Channel Receiver driver module
3 	       used on the Siemens DVB-C cards
4 
5     Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
6     Copyright (C) 2004 Markus Schulz <msc@antzsystem.de>
7 		   Support for TDA10021
8 
9     This program is free software; you can redistribute it and/or modify
10     it under the terms of the GNU General Public License as published by
11     the Free Software Foundation; either version 2 of the License, or
12     (at your option) any later version.
13 
14     This program is distributed in the hope that it will be useful,
15     but WITHOUT ANY WARRANTY; without even the implied warranty of
16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17     GNU General Public License for more details.
18 
19     You should have received a copy of the GNU General Public License
20     along with this program; if not, write to the Free Software
21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23 
24 #include <linux/delay.h>
25 #include <linux/errno.h>
26 #include <linux/init.h>
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/string.h>
30 #include <linux/slab.h>
31 
32 #include "dvb_frontend.h"
33 #include "tda1002x.h"
34 
35 
36 struct tda10021_state {
37 	struct i2c_adapter* i2c;
38 	/* configuration settings */
39 	const struct tda1002x_config* config;
40 	struct dvb_frontend frontend;
41 
42 	u8 pwm;
43 	u8 reg0;
44 };
45 
46 
47 #if 0
48 #define dprintk(x...) printk(x)
49 #else
50 #define dprintk(x...)
51 #endif
52 
53 static int verbose;
54 
55 #define XIN 57840000UL
56 
57 #define FIN (XIN >> 4)
58 
59 static int tda10021_inittab_size = 0x40;
60 static u8 tda10021_inittab[0x40]=
61 {
62 	0x73, 0x6a, 0x23, 0x0a, 0x02, 0x37, 0x77, 0x1a,
63 	0x37, 0x6a, 0x17, 0x8a, 0x1e, 0x86, 0x43, 0x40,
64 	0xb8, 0x3f, 0xa1, 0x00, 0xcd, 0x01, 0x00, 0xff,
65 	0x11, 0x00, 0x7c, 0x31, 0x30, 0x20, 0x00, 0x00,
66 	0x02, 0x00, 0x00, 0x7d, 0x00, 0x00, 0x00, 0x00,
67 	0x07, 0x00, 0x33, 0x11, 0x0d, 0x95, 0x08, 0x58,
68 	0x00, 0x00, 0x80, 0x00, 0x80, 0xff, 0x00, 0x00,
69 	0x04, 0x2d, 0x2f, 0xff, 0x00, 0x00, 0x00, 0x00,
70 };
71 
72 static int _tda10021_writereg (struct tda10021_state* state, u8 reg, u8 data)
73 {
74 	u8 buf[] = { reg, data };
75 	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
76 	int ret;
77 
78 	ret = i2c_transfer (state->i2c, &msg, 1);
79 	if (ret != 1)
80 		printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
81 			state->frontend.dvb->num, __func__, reg, data, ret);
82 
83 	msleep(10);
84 	return (ret != 1) ? -EREMOTEIO : 0;
85 }
86 
87 static u8 tda10021_readreg (struct tda10021_state* state, u8 reg)
88 {
89 	u8 b0 [] = { reg };
90 	u8 b1 [] = { 0 };
91 	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 },
92 				  { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
93 	int ret;
94 
95 	ret = i2c_transfer (state->i2c, msg, 2);
96 	// Don't print an error message if the id is read.
97 	if (ret != 2 && reg != 0x1a)
98 		printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
99 				__func__, ret);
100 	return b1[0];
101 }
102 
103 //get access to tuner
104 static int lock_tuner(struct tda10021_state* state)
105 {
106 	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] | 0x80 };
107 	struct i2c_msg msg = {.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
108 
109 	if(i2c_transfer(state->i2c, &msg, 1) != 1)
110 	{
111 		printk("tda10021: lock tuner fails\n");
112 		return -EREMOTEIO;
113 	}
114 	return 0;
115 }
116 
117 //release access from tuner
118 static int unlock_tuner(struct tda10021_state* state)
119 {
120 	u8 buf[2] = { 0x0f, tda10021_inittab[0x0f] & 0x7f };
121 	struct i2c_msg msg_post={.addr=state->config->demod_address, .flags=0, .buf=buf, .len=2};
122 
123 	if(i2c_transfer(state->i2c, &msg_post, 1) != 1)
124 	{
125 		printk("tda10021: unlock tuner fails\n");
126 		return -EREMOTEIO;
127 	}
128 	return 0;
129 }
130 
131 static int tda10021_setup_reg0(struct tda10021_state *state, u8 reg0,
132 			       enum fe_spectral_inversion inversion)
133 {
134 	reg0 |= state->reg0 & 0x63;
135 
136 	if ((INVERSION_ON == inversion) ^ (state->config->invert == 0))
137 		reg0 &= ~0x20;
138 	else
139 		reg0 |= 0x20;
140 
141 	_tda10021_writereg (state, 0x00, reg0 & 0xfe);
142 	_tda10021_writereg (state, 0x00, reg0 | 0x01);
143 
144 	state->reg0 = reg0;
145 	return 0;
146 }
147 
148 static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate)
149 {
150 	s32 BDR;
151 	s32 BDRI;
152 	s16 SFIL=0;
153 	u16 NDEC = 0;
154 	u32 tmp, ratio;
155 
156 	if (symbolrate > XIN/2)
157 		symbolrate = XIN/2;
158 	if (symbolrate < 500000)
159 		symbolrate = 500000;
160 
161 	if (symbolrate < XIN/16) NDEC = 1;
162 	if (symbolrate < XIN/32) NDEC = 2;
163 	if (symbolrate < XIN/64) NDEC = 3;
164 
165 	if (symbolrate < (u32)(XIN/12.3)) SFIL = 1;
166 	if (symbolrate < (u32)(XIN/16))	 SFIL = 0;
167 	if (symbolrate < (u32)(XIN/24.6)) SFIL = 1;
168 	if (symbolrate < (u32)(XIN/32))	 SFIL = 0;
169 	if (symbolrate < (u32)(XIN/49.2)) SFIL = 1;
170 	if (symbolrate < (u32)(XIN/64))	 SFIL = 0;
171 	if (symbolrate < (u32)(XIN/98.4)) SFIL = 1;
172 
173 	symbolrate <<= NDEC;
174 	ratio = (symbolrate << 4) / FIN;
175 	tmp =  ((symbolrate << 4) % FIN) << 8;
176 	ratio = (ratio << 8) + tmp / FIN;
177 	tmp = (tmp % FIN) << 8;
178 	ratio = (ratio << 8) + DIV_ROUND_CLOSEST(tmp, FIN);
179 
180 	BDR = ratio;
181 	BDRI = (((XIN << 5) / symbolrate) + 1) / 2;
182 
183 	if (BDRI > 0xFF)
184 		BDRI = 0xFF;
185 
186 	SFIL = (SFIL << 4) | tda10021_inittab[0x0E];
187 
188 	NDEC = (NDEC << 6) | tda10021_inittab[0x03];
189 
190 	_tda10021_writereg (state, 0x03, NDEC);
191 	_tda10021_writereg (state, 0x0a, BDR&0xff);
192 	_tda10021_writereg (state, 0x0b, (BDR>> 8)&0xff);
193 	_tda10021_writereg (state, 0x0c, (BDR>>16)&0x3f);
194 
195 	_tda10021_writereg (state, 0x0d, BDRI);
196 	_tda10021_writereg (state, 0x0e, SFIL);
197 
198 	return 0;
199 }
200 
201 static int tda10021_init (struct dvb_frontend *fe)
202 {
203 	struct tda10021_state* state = fe->demodulator_priv;
204 	int i;
205 
206 	dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num);
207 
208 	//_tda10021_writereg (fe, 0, 0);
209 
210 	for (i=0; i<tda10021_inittab_size; i++)
211 		_tda10021_writereg (state, i, tda10021_inittab[i]);
212 
213 	_tda10021_writereg (state, 0x34, state->pwm);
214 
215 	//Comment by markus
216 	//0x2A[3-0] == PDIV -> P multiplaying factor (P=PDIV+1)(default 0)
217 	//0x2A[4] == BYPPLL -> Power down mode (default 1)
218 	//0x2A[5] == LCK -> PLL Lock Flag
219 	//0x2A[6] == POLAXIN -> Polarity of the input reference clock (default 0)
220 
221 	//Activate PLL
222 	_tda10021_writereg(state, 0x2a, tda10021_inittab[0x2a] & 0xef);
223 	return 0;
224 }
225 
226 struct qam_params {
227 	u8 conf, agcref, lthr, mseth, aref;
228 };
229 
230 static int tda10021_set_parameters(struct dvb_frontend *fe)
231 {
232 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
233 	u32 delsys  = c->delivery_system;
234 	unsigned qam = c->modulation;
235 	bool is_annex_c;
236 	u32 reg0x3d;
237 	struct tda10021_state* state = fe->demodulator_priv;
238 	static const struct qam_params qam_params[] = {
239 		/* Modulation  Conf  AGCref  LTHR  MSETH  AREF */
240 		[QPSK]	   = { 0x14, 0x78,   0x78, 0x8c,  0x96 },
241 		[QAM_16]   = { 0x00, 0x8c,   0x87, 0xa2,  0x91 },
242 		[QAM_32]   = { 0x04, 0x8c,   0x64, 0x74,  0x96 },
243 		[QAM_64]   = { 0x08, 0x6a,   0x46, 0x43,  0x6a },
244 		[QAM_128]  = { 0x0c, 0x78,   0x36, 0x34,  0x7e },
245 		[QAM_256]  = { 0x10, 0x5c,   0x26, 0x23,  0x6b },
246 	};
247 
248 	switch (delsys) {
249 	case SYS_DVBC_ANNEX_A:
250 		is_annex_c = false;
251 		break;
252 	case SYS_DVBC_ANNEX_C:
253 		is_annex_c = true;
254 		break;
255 	default:
256 		return -EINVAL;
257 	}
258 
259 	/*
260 	 * gcc optimizes the code below the same way as it would code:
261 	 *           "if (qam > 5) return -EINVAL;"
262 	 * Yet, the code is clearer, as it shows what QAM standards are
263 	 * supported by the driver, and avoids the usage of magic numbers on
264 	 * it.
265 	 */
266 	switch (qam) {
267 	case QPSK:
268 	case QAM_16:
269 	case QAM_32:
270 	case QAM_64:
271 	case QAM_128:
272 	case QAM_256:
273 		break;
274 	default:
275 		return -EINVAL;
276 	}
277 
278 	if (c->inversion != INVERSION_ON && c->inversion != INVERSION_OFF)
279 		return -EINVAL;
280 
281 	/*printk("tda10021: set frequency to %d qam=%d symrate=%d\n", p->frequency,qam,p->symbol_rate);*/
282 
283 	if (fe->ops.tuner_ops.set_params) {
284 		fe->ops.tuner_ops.set_params(fe);
285 		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
286 	}
287 
288 	tda10021_set_symbolrate(state, c->symbol_rate);
289 	_tda10021_writereg(state, 0x34, state->pwm);
290 
291 	_tda10021_writereg(state, 0x01, qam_params[qam].agcref);
292 	_tda10021_writereg(state, 0x05, qam_params[qam].lthr);
293 	_tda10021_writereg(state, 0x08, qam_params[qam].mseth);
294 	_tda10021_writereg(state, 0x09, qam_params[qam].aref);
295 
296 	/*
297 	 * Bit 0 == 0 means roll-off = 0.15 (Annex A)
298 	 *	 == 1 means roll-off = 0.13 (Annex C)
299 	 */
300 	reg0x3d = tda10021_readreg (state, 0x3d);
301 	if (is_annex_c)
302 		_tda10021_writereg (state, 0x3d, 0x01 | reg0x3d);
303 	else
304 		_tda10021_writereg (state, 0x3d, 0xfe & reg0x3d);
305 	tda10021_setup_reg0(state, qam_params[qam].conf, c->inversion);
306 
307 	return 0;
308 }
309 
310 static int tda10021_read_status(struct dvb_frontend *fe,
311 				enum fe_status *status)
312 {
313 	struct tda10021_state* state = fe->demodulator_priv;
314 	int sync;
315 
316 	*status = 0;
317 	//0x11[0] == EQALGO -> Equalizer algorithms state
318 	//0x11[1] == CARLOCK -> Carrier locked
319 	//0x11[2] == FSYNC -> Frame synchronisation
320 	//0x11[3] == FEL -> Front End locked
321 	//0x11[6] == NODVB -> DVB Mode Information
322 	sync = tda10021_readreg (state, 0x11);
323 
324 	if (sync & 2)
325 		*status |= FE_HAS_SIGNAL|FE_HAS_CARRIER;
326 
327 	if (sync & 4)
328 		*status |= FE_HAS_SYNC|FE_HAS_VITERBI;
329 
330 	if (sync & 8)
331 		*status |= FE_HAS_LOCK;
332 
333 	return 0;
334 }
335 
336 static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber)
337 {
338 	struct tda10021_state* state = fe->demodulator_priv;
339 
340 	u32 _ber = tda10021_readreg(state, 0x14) |
341 		(tda10021_readreg(state, 0x15) << 8) |
342 		((tda10021_readreg(state, 0x16) & 0x0f) << 16);
343 	_tda10021_writereg(state, 0x10, (tda10021_readreg(state, 0x10) & ~0xc0)
344 					| (tda10021_inittab[0x10] & 0xc0));
345 	*ber = 10 * _ber;
346 
347 	return 0;
348 }
349 
350 static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength)
351 {
352 	struct tda10021_state* state = fe->demodulator_priv;
353 
354 	u8 config = tda10021_readreg(state, 0x02);
355 	u8 gain = tda10021_readreg(state, 0x17);
356 	if (config & 0x02)
357 		/* the agc value is inverted */
358 		gain = ~gain;
359 	*strength = (gain << 8) | gain;
360 
361 	return 0;
362 }
363 
364 static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr)
365 {
366 	struct tda10021_state* state = fe->demodulator_priv;
367 
368 	u8 quality = ~tda10021_readreg(state, 0x18);
369 	*snr = (quality << 8) | quality;
370 
371 	return 0;
372 }
373 
374 static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
375 {
376 	struct tda10021_state* state = fe->demodulator_priv;
377 
378 	*ucblocks = tda10021_readreg (state, 0x13) & 0x7f;
379 	if (*ucblocks == 0x7f)
380 		*ucblocks = 0xffffffff;
381 
382 	/* reset uncorrected block counter */
383 	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10] & 0xdf);
384 	_tda10021_writereg (state, 0x10, tda10021_inittab[0x10]);
385 
386 	return 0;
387 }
388 
389 static int tda10021_get_frontend(struct dvb_frontend *fe,
390 				 struct dtv_frontend_properties *p)
391 {
392 	struct tda10021_state* state = fe->demodulator_priv;
393 	int sync;
394 	s8 afc = 0;
395 
396 	sync = tda10021_readreg(state, 0x11);
397 	afc = tda10021_readreg(state, 0x19);
398 	if (verbose) {
399 		/* AFC only valid when carrier has been recovered */
400 		printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
401 				  "DVB: TDA10021(%d): [AFC (%d) %dHz]\n",
402 			state->frontend.dvb->num, afc,
403 		       -((s32)p->symbol_rate * afc) >> 10);
404 	}
405 
406 	p->inversion = ((state->reg0 & 0x20) == 0x20) ^ (state->config->invert != 0) ? INVERSION_ON : INVERSION_OFF;
407 	p->modulation = ((state->reg0 >> 2) & 7) + QAM_16;
408 
409 	p->fec_inner = FEC_NONE;
410 	p->frequency = ((p->frequency + 31250) / 62500) * 62500;
411 
412 	if (sync & 2)
413 		p->frequency -= ((s32)p->symbol_rate * afc) >> 10;
414 
415 	return 0;
416 }
417 
418 static int tda10021_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
419 {
420 	struct tda10021_state* state = fe->demodulator_priv;
421 
422 	if (enable) {
423 		lock_tuner(state);
424 	} else {
425 		unlock_tuner(state);
426 	}
427 	return 0;
428 }
429 
430 static int tda10021_sleep(struct dvb_frontend* fe)
431 {
432 	struct tda10021_state* state = fe->demodulator_priv;
433 
434 	_tda10021_writereg (state, 0x1b, 0x02);  /* pdown ADC */
435 	_tda10021_writereg (state, 0x00, 0x80);  /* standby */
436 
437 	return 0;
438 }
439 
440 static void tda10021_release(struct dvb_frontend* fe)
441 {
442 	struct tda10021_state* state = fe->demodulator_priv;
443 	kfree(state);
444 }
445 
446 static const struct dvb_frontend_ops tda10021_ops;
447 
448 struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config,
449 				     struct i2c_adapter* i2c,
450 				     u8 pwm)
451 {
452 	struct tda10021_state* state = NULL;
453 	u8 id;
454 
455 	/* allocate memory for the internal state */
456 	state = kzalloc(sizeof(struct tda10021_state), GFP_KERNEL);
457 	if (state == NULL) goto error;
458 
459 	/* setup the state */
460 	state->config = config;
461 	state->i2c = i2c;
462 	state->pwm = pwm;
463 	state->reg0 = tda10021_inittab[0];
464 
465 	/* check if the demod is there */
466 	id = tda10021_readreg(state, 0x1a);
467 	if ((id & 0xf0) != 0x70) goto error;
468 
469 	/* Don't claim TDA10023 */
470 	if (id == 0x7d)
471 		goto error;
472 
473 	printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
474 	       state->config->demod_address, id);
475 
476 	/* create dvb_frontend */
477 	memcpy(&state->frontend.ops, &tda10021_ops, sizeof(struct dvb_frontend_ops));
478 	state->frontend.demodulator_priv = state;
479 	return &state->frontend;
480 
481 error:
482 	kfree(state);
483 	return NULL;
484 }
485 
486 static const struct dvb_frontend_ops tda10021_ops = {
487 	.delsys = { SYS_DVBC_ANNEX_A, SYS_DVBC_ANNEX_C },
488 	.info = {
489 		.name = "Philips TDA10021 DVB-C",
490 		.frequency_stepsize = 62500,
491 		.frequency_min = 47000000,
492 		.frequency_max = 862000000,
493 		.symbol_rate_min = (XIN/2)/64,     /* SACLK/64 == (XIN/2)/64 */
494 		.symbol_rate_max = (XIN/2)/4,      /* SACLK/4 */
495 	#if 0
496 		.frequency_tolerance = ???,
497 		.symbol_rate_tolerance = ???,  /* ppm */  /* == 8% (spec p. 5) */
498 	#endif
499 		.caps = 0x400 | //FE_CAN_QAM_4
500 			FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 |
501 			FE_CAN_QAM_128 | FE_CAN_QAM_256 |
502 			FE_CAN_FEC_AUTO
503 	},
504 
505 	.release = tda10021_release,
506 
507 	.init = tda10021_init,
508 	.sleep = tda10021_sleep,
509 	.i2c_gate_ctrl = tda10021_i2c_gate_ctrl,
510 
511 	.set_frontend = tda10021_set_parameters,
512 	.get_frontend = tda10021_get_frontend,
513 
514 	.read_status = tda10021_read_status,
515 	.read_ber = tda10021_read_ber,
516 	.read_signal_strength = tda10021_read_signal_strength,
517 	.read_snr = tda10021_read_snr,
518 	.read_ucblocks = tda10021_read_ucblocks,
519 };
520 
521 module_param(verbose, int, 0644);
522 MODULE_PARM_DESC(verbose, "print AFC offset after tuning for debugging the PWM setting");
523 
524 MODULE_DESCRIPTION("Philips TDA10021 DVB-C demodulator driver");
525 MODULE_AUTHOR("Ralph Metzler, Holger Waechtler, Markus Schulz");
526 MODULE_LICENSE("GPL");
527 
528 EXPORT_SYMBOL(tda10021_attach);
529