1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Silicon Labs Si2168 DVB-T/T2/C demodulator driver 4 * 5 * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> 6 */ 7 8 #include <linux/delay.h> 9 10 #include "si2168_priv.h" 11 12 static const struct dvb_frontend_ops si2168_ops; 13 14 static void cmd_init(struct si2168_cmd *cmd, const u8 *buf, int wlen, int rlen) 15 { 16 memcpy(cmd->args, buf, wlen); 17 cmd->wlen = wlen; 18 cmd->rlen = rlen; 19 } 20 21 /* execute firmware command */ 22 static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd) 23 { 24 struct si2168_dev *dev = i2c_get_clientdata(client); 25 int ret; 26 unsigned long timeout; 27 28 mutex_lock(&dev->i2c_mutex); 29 30 if (cmd->wlen) { 31 /* write cmd and args for firmware */ 32 ret = i2c_master_send(client, cmd->args, cmd->wlen); 33 if (ret < 0) { 34 goto err_mutex_unlock; 35 } else if (ret != cmd->wlen) { 36 ret = -EREMOTEIO; 37 goto err_mutex_unlock; 38 } 39 } 40 41 if (cmd->rlen) { 42 /* wait cmd execution terminate */ 43 #define TIMEOUT 70 44 timeout = jiffies + msecs_to_jiffies(TIMEOUT); 45 while (!time_after(jiffies, timeout)) { 46 ret = i2c_master_recv(client, cmd->args, cmd->rlen); 47 if (ret < 0) { 48 goto err_mutex_unlock; 49 } else if (ret != cmd->rlen) { 50 ret = -EREMOTEIO; 51 goto err_mutex_unlock; 52 } 53 54 /* firmware ready? */ 55 if ((cmd->args[0] >> 7) & 0x01) 56 break; 57 } 58 59 dev_dbg(&client->dev, "cmd execution took %d ms\n", 60 jiffies_to_msecs(jiffies) - 61 (jiffies_to_msecs(timeout) - TIMEOUT)); 62 63 /* error bit set? */ 64 if ((cmd->args[0] >> 6) & 0x01) { 65 ret = -EREMOTEIO; 66 goto err_mutex_unlock; 67 } 68 69 if (!((cmd->args[0] >> 7) & 0x01)) { 70 ret = -ETIMEDOUT; 71 goto err_mutex_unlock; 72 } 73 } 74 75 mutex_unlock(&dev->i2c_mutex); 76 return 0; 77 err_mutex_unlock: 78 mutex_unlock(&dev->i2c_mutex); 79 dev_dbg(&client->dev, "failed=%d\n", ret); 80 return ret; 81 } 82 83 static int si2168_ts_bus_ctrl(struct dvb_frontend *fe, int acquire) 84 { 85 struct i2c_client *client = fe->demodulator_priv; 86 struct si2168_dev *dev = i2c_get_clientdata(client); 87 struct si2168_cmd cmd; 88 int ret = 0; 89 90 dev_dbg(&client->dev, "%s acquire: %d\n", __func__, acquire); 91 92 /* set manual value */ 93 if (dev->ts_mode & SI2168_TS_CLK_MANUAL) { 94 cmd_init(&cmd, "\x14\x00\x0d\x10\xe8\x03", 6, 4); 95 ret = si2168_cmd_execute(client, &cmd); 96 if (ret) 97 return ret; 98 } 99 /* set TS_MODE property */ 100 cmd_init(&cmd, "\x14\x00\x01\x10\x10\x00", 6, 4); 101 if (dev->ts_mode & SI2168_TS_CLK_MANUAL) 102 cmd.args[4] = SI2168_TS_CLK_MANUAL; 103 if (acquire) 104 cmd.args[4] |= dev->ts_mode; 105 else 106 cmd.args[4] |= SI2168_TS_TRISTATE; 107 if (dev->ts_clock_gapped) 108 cmd.args[4] |= 0x40; 109 ret = si2168_cmd_execute(client, &cmd); 110 111 return ret; 112 } 113 114 static int si2168_read_status(struct dvb_frontend *fe, enum fe_status *status) 115 { 116 struct i2c_client *client = fe->demodulator_priv; 117 struct si2168_dev *dev = i2c_get_clientdata(client); 118 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 119 int ret, i; 120 unsigned int utmp, utmp1, utmp2; 121 struct si2168_cmd cmd; 122 123 *status = 0; 124 125 if (!dev->active) { 126 ret = -EAGAIN; 127 goto err; 128 } 129 130 switch (c->delivery_system) { 131 case SYS_DVBT: 132 cmd_init(&cmd, "\xa0\x01", 2, 13); 133 break; 134 case SYS_DVBC_ANNEX_A: 135 cmd_init(&cmd, "\x90\x01", 2, 9); 136 break; 137 case SYS_DVBT2: 138 cmd_init(&cmd, "\x50\x01", 2, 14); 139 break; 140 default: 141 ret = -EINVAL; 142 goto err; 143 } 144 145 ret = si2168_cmd_execute(client, &cmd); 146 if (ret) 147 goto err; 148 149 switch ((cmd.args[2] >> 1) & 0x03) { 150 case 0x01: 151 *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; 152 break; 153 case 0x03: 154 *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | 155 FE_HAS_SYNC | FE_HAS_LOCK; 156 break; 157 } 158 159 dev->fe_status = *status; 160 161 if (*status & FE_HAS_LOCK) { 162 c->cnr.len = 1; 163 c->cnr.stat[0].scale = FE_SCALE_DECIBEL; 164 c->cnr.stat[0].svalue = cmd.args[3] * 1000 / 4; 165 } else { 166 c->cnr.len = 1; 167 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 168 } 169 170 dev_dbg(&client->dev, "status=%02x args=%*ph\n", 171 *status, cmd.rlen, cmd.args); 172 173 /* BER */ 174 if (*status & FE_HAS_VITERBI) { 175 cmd_init(&cmd, "\x82\x00", 2, 3); 176 ret = si2168_cmd_execute(client, &cmd); 177 if (ret) 178 goto err; 179 180 /* 181 * Firmware returns [0, 255] mantissa and [0, 8] exponent. 182 * Convert to DVB API: mantissa * 10^(8 - exponent) / 10^8 183 */ 184 utmp = clamp(8 - cmd.args[1], 0, 8); 185 for (i = 0, utmp1 = 1; i < utmp; i++) 186 utmp1 = utmp1 * 10; 187 188 utmp1 = cmd.args[2] * utmp1; 189 utmp2 = 100000000; /* 10^8 */ 190 191 dev_dbg(&client->dev, 192 "post_bit_error=%u post_bit_count=%u ber=%u*10^-%u\n", 193 utmp1, utmp2, cmd.args[2], cmd.args[1]); 194 195 c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; 196 c->post_bit_error.stat[0].uvalue += utmp1; 197 c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; 198 c->post_bit_count.stat[0].uvalue += utmp2; 199 } else { 200 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 201 c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 202 } 203 204 /* UCB */ 205 if (*status & FE_HAS_SYNC) { 206 cmd_init(&cmd, "\x84\x01", 2, 3); 207 ret = si2168_cmd_execute(client, &cmd); 208 if (ret) 209 goto err; 210 211 utmp1 = cmd.args[2] << 8 | cmd.args[1] << 0; 212 dev_dbg(&client->dev, "block_error=%u\n", utmp1); 213 214 /* Sometimes firmware returns bogus value */ 215 if (utmp1 == 0xffff) 216 utmp1 = 0; 217 218 c->block_error.stat[0].scale = FE_SCALE_COUNTER; 219 c->block_error.stat[0].uvalue += utmp1; 220 } else { 221 c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 222 } 223 224 return 0; 225 err: 226 dev_dbg(&client->dev, "failed=%d\n", ret); 227 return ret; 228 } 229 230 static int si2168_set_frontend(struct dvb_frontend *fe) 231 { 232 struct i2c_client *client = fe->demodulator_priv; 233 struct si2168_dev *dev = i2c_get_clientdata(client); 234 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 235 int ret; 236 struct si2168_cmd cmd; 237 u8 bandwidth, delivery_system; 238 239 dev_dbg(&client->dev, 240 "delivery_system=%u modulation=%u frequency=%u bandwidth_hz=%u symbol_rate=%u inversion=%u stream_id=%u\n", 241 c->delivery_system, c->modulation, c->frequency, 242 c->bandwidth_hz, c->symbol_rate, c->inversion, 243 c->stream_id); 244 245 if (!dev->active) { 246 ret = -EAGAIN; 247 goto err; 248 } 249 250 switch (c->delivery_system) { 251 case SYS_DVBT: 252 delivery_system = 0x20; 253 break; 254 case SYS_DVBC_ANNEX_A: 255 delivery_system = 0x30; 256 break; 257 case SYS_DVBT2: 258 delivery_system = 0x70; 259 break; 260 default: 261 ret = -EINVAL; 262 goto err; 263 } 264 265 if (c->bandwidth_hz == 0) { 266 ret = -EINVAL; 267 goto err; 268 } else if (c->bandwidth_hz <= 2000000) 269 bandwidth = 0x02; 270 else if (c->bandwidth_hz <= 5000000) 271 bandwidth = 0x05; 272 else if (c->bandwidth_hz <= 6000000) 273 bandwidth = 0x06; 274 else if (c->bandwidth_hz <= 7000000) 275 bandwidth = 0x07; 276 else if (c->bandwidth_hz <= 8000000) 277 bandwidth = 0x08; 278 else if (c->bandwidth_hz <= 9000000) 279 bandwidth = 0x09; 280 else if (c->bandwidth_hz <= 10000000) 281 bandwidth = 0x0a; 282 else 283 bandwidth = 0x0f; 284 285 /* program tuner */ 286 if (fe->ops.tuner_ops.set_params) { 287 ret = fe->ops.tuner_ops.set_params(fe); 288 if (ret) 289 goto err; 290 } 291 292 cmd_init(&cmd, "\x88\x02\x02\x02\x02", 5, 5); 293 ret = si2168_cmd_execute(client, &cmd); 294 if (ret) 295 goto err; 296 297 /* that has no big effect */ 298 if (c->delivery_system == SYS_DVBT) 299 cmd_init(&cmd, "\x89\x21\x06\x11\xff\x98", 6, 3); 300 else if (c->delivery_system == SYS_DVBC_ANNEX_A) 301 cmd_init(&cmd, "\x89\x21\x06\x11\x89\xf0", 6, 3); 302 else if (c->delivery_system == SYS_DVBT2) 303 cmd_init(&cmd, "\x89\x21\x06\x11\x89\x20", 6, 3); 304 ret = si2168_cmd_execute(client, &cmd); 305 if (ret) 306 goto err; 307 308 if (c->delivery_system == SYS_DVBT2) { 309 /* select PLP */ 310 cmd.args[0] = 0x52; 311 cmd.args[1] = c->stream_id & 0xff; 312 cmd.args[2] = c->stream_id == NO_STREAM_ID_FILTER ? 0 : 1; 313 cmd.wlen = 3; 314 cmd.rlen = 1; 315 ret = si2168_cmd_execute(client, &cmd); 316 if (ret) 317 goto err; 318 } 319 320 cmd_init(&cmd, "\x51\x03", 2, 12); 321 ret = si2168_cmd_execute(client, &cmd); 322 if (ret) 323 goto err; 324 325 cmd_init(&cmd, "\x12\x08\x04", 3, 3); 326 ret = si2168_cmd_execute(client, &cmd); 327 if (ret) 328 goto err; 329 330 cmd_init(&cmd, "\x14\x00\x0c\x10\x12\x00", 6, 4); 331 ret = si2168_cmd_execute(client, &cmd); 332 if (ret) 333 goto err; 334 335 cmd_init(&cmd, "\x14\x00\x06\x10\x24\x00", 6, 4); 336 ret = si2168_cmd_execute(client, &cmd); 337 if (ret) 338 goto err; 339 340 cmd_init(&cmd, "\x14\x00\x07\x10\x00\x24", 6, 4); 341 ret = si2168_cmd_execute(client, &cmd); 342 if (ret) 343 goto err; 344 345 cmd_init(&cmd, "\x14\x00\x0a\x10\x00\x00", 6, 4); 346 cmd.args[4] = delivery_system | bandwidth; 347 if (dev->spectral_inversion) 348 cmd.args[5] |= 1; 349 ret = si2168_cmd_execute(client, &cmd); 350 if (ret) 351 goto err; 352 353 /* set DVB-C symbol rate */ 354 if (c->delivery_system == SYS_DVBC_ANNEX_A) { 355 cmd_init(&cmd, "\x14\x00\x02\x11\x00\x00", 6, 4); 356 cmd.args[4] = ((c->symbol_rate / 1000) >> 0) & 0xff; 357 cmd.args[5] = ((c->symbol_rate / 1000) >> 8) & 0xff; 358 ret = si2168_cmd_execute(client, &cmd); 359 if (ret) 360 goto err; 361 } 362 363 cmd_init(&cmd, "\x14\x00\x0f\x10\x10\x00", 6, 4); 364 ret = si2168_cmd_execute(client, &cmd); 365 if (ret) 366 goto err; 367 368 cmd_init(&cmd, "\x14\x00\x09\x10\xe3\x08", 6, 4); 369 cmd.args[5] |= dev->ts_clock_inv ? 0x00 : 0x10; 370 ret = si2168_cmd_execute(client, &cmd); 371 if (ret) 372 goto err; 373 374 cmd_init(&cmd, "\x14\x00\x08\x10\xd7\x05", 6, 4); 375 cmd.args[5] |= dev->ts_clock_inv ? 0x00 : 0x10; 376 ret = si2168_cmd_execute(client, &cmd); 377 if (ret) 378 goto err; 379 380 cmd_init(&cmd, "\x14\x00\x01\x12\x00\x00", 6, 4); 381 ret = si2168_cmd_execute(client, &cmd); 382 if (ret) 383 goto err; 384 385 cmd_init(&cmd, "\x14\x00\x01\x03\x0c\x00", 6, 4); 386 ret = si2168_cmd_execute(client, &cmd); 387 if (ret) 388 goto err; 389 390 cmd_init(&cmd, "\x85", 1, 1); 391 ret = si2168_cmd_execute(client, &cmd); 392 if (ret) 393 goto err; 394 395 dev->delivery_system = c->delivery_system; 396 397 /* enable ts bus */ 398 ret = si2168_ts_bus_ctrl(fe, 1); 399 if (ret) 400 goto err; 401 402 return 0; 403 err: 404 dev_dbg(&client->dev, "failed=%d\n", ret); 405 return ret; 406 } 407 408 static int si2168_init(struct dvb_frontend *fe) 409 { 410 struct i2c_client *client = fe->demodulator_priv; 411 struct si2168_dev *dev = i2c_get_clientdata(client); 412 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 413 int ret, len, remaining; 414 const struct firmware *fw; 415 struct si2168_cmd cmd; 416 417 dev_dbg(&client->dev, "\n"); 418 419 /* initialize */ 420 cmd_init(&cmd, "\xc0\x12\x00\x0c\x00\x0d\x16\x00\x00\x00\x00\x00\x00", 421 13, 0); 422 ret = si2168_cmd_execute(client, &cmd); 423 if (ret) 424 goto err; 425 426 if (dev->warm) { 427 /* resume */ 428 cmd_init(&cmd, "\xc0\x06\x08\x0f\x00\x20\x21\x01", 8, 1); 429 ret = si2168_cmd_execute(client, &cmd); 430 if (ret) 431 goto err; 432 433 udelay(100); 434 cmd_init(&cmd, "\x85", 1, 1); 435 ret = si2168_cmd_execute(client, &cmd); 436 if (ret) 437 goto err; 438 439 goto warm; 440 } 441 442 /* power up */ 443 cmd_init(&cmd, "\xc0\x06\x01\x0f\x00\x20\x20\x01", 8, 1); 444 ret = si2168_cmd_execute(client, &cmd); 445 if (ret) 446 goto err; 447 448 /* request the firmware, this will block and timeout */ 449 ret = request_firmware(&fw, dev->firmware_name, &client->dev); 450 if (ret) { 451 dev_err(&client->dev, 452 "firmware file '%s' not found\n", 453 dev->firmware_name); 454 goto err_release_firmware; 455 } 456 457 dev_info(&client->dev, "downloading firmware from file '%s'\n", 458 dev->firmware_name); 459 460 if ((fw->size % 17 == 0) && (fw->data[0] > 5)) { 461 /* firmware is in the new format */ 462 for (remaining = fw->size; remaining > 0; remaining -= 17) { 463 len = fw->data[fw->size - remaining]; 464 if (len > SI2168_ARGLEN) { 465 ret = -EINVAL; 466 break; 467 } 468 cmd_init(&cmd, &fw->data[(fw->size - remaining) + 1], 469 len, 1); 470 ret = si2168_cmd_execute(client, &cmd); 471 if (ret) 472 break; 473 } 474 } else if (fw->size % 8 == 0) { 475 /* firmware is in the old format */ 476 for (remaining = fw->size; remaining > 0; remaining -= 8) { 477 cmd_init(&cmd, &fw->data[fw->size - remaining], 8, 1); 478 ret = si2168_cmd_execute(client, &cmd); 479 if (ret) 480 break; 481 } 482 } else { 483 /* bad or unknown firmware format */ 484 ret = -EINVAL; 485 } 486 487 if (ret) { 488 dev_err(&client->dev, "firmware download failed %d\n", ret); 489 goto err_release_firmware; 490 } 491 492 release_firmware(fw); 493 494 cmd_init(&cmd, "\x01\x01", 2, 1); 495 ret = si2168_cmd_execute(client, &cmd); 496 if (ret) 497 goto err; 498 499 /* query firmware version */ 500 cmd_init(&cmd, "\x11", 1, 10); 501 ret = si2168_cmd_execute(client, &cmd); 502 if (ret) 503 goto err; 504 505 dev->version = (cmd.args[9] + '@') << 24 | (cmd.args[6] - '0') << 16 | 506 (cmd.args[7] - '0') << 8 | (cmd.args[8]) << 0; 507 dev_info(&client->dev, "firmware version: %c %d.%d.%d\n", 508 dev->version >> 24 & 0xff, dev->version >> 16 & 0xff, 509 dev->version >> 8 & 0xff, dev->version >> 0 & 0xff); 510 511 /* set ts mode */ 512 ret = si2168_ts_bus_ctrl(fe, 1); 513 if (ret) 514 goto err; 515 516 dev->warm = true; 517 dev->initialized = true; 518 warm: 519 /* Init stats here to indicate which stats are supported */ 520 c->cnr.len = 1; 521 c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 522 c->post_bit_error.len = 1; 523 c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 524 c->post_bit_count.len = 1; 525 c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 526 c->block_error.len = 1; 527 c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 528 529 dev->active = true; 530 531 return 0; 532 err_release_firmware: 533 release_firmware(fw); 534 err: 535 dev_dbg(&client->dev, "failed=%d\n", ret); 536 return ret; 537 } 538 539 static int si2168_resume(struct dvb_frontend *fe) 540 { 541 struct i2c_client *client = fe->demodulator_priv; 542 struct si2168_dev *dev = i2c_get_clientdata(client); 543 544 /* 545 * check whether si2168_init() has been called successfully 546 * outside of a resume cycle. Only call it (and load firmware) 547 * in this case. si2168_init() is only called during resume 548 * once the device has actually been used. Otherwise, leave the 549 * device untouched. 550 */ 551 if (dev->initialized) { 552 dev_dbg(&client->dev, "previously initialized, call si2168_init()\n"); 553 return si2168_init(fe); 554 } 555 dev_dbg(&client->dev, "not initialized yet, skipping init on resume\n"); 556 return 0; 557 } 558 559 static int si2168_sleep(struct dvb_frontend *fe) 560 { 561 struct i2c_client *client = fe->demodulator_priv; 562 struct si2168_dev *dev = i2c_get_clientdata(client); 563 int ret; 564 struct si2168_cmd cmd; 565 566 dev_dbg(&client->dev, "\n"); 567 568 dev->active = false; 569 570 /* tri-state data bus */ 571 ret = si2168_ts_bus_ctrl(fe, 0); 572 if (ret) 573 goto err; 574 575 /* Firmware later than B 4.0-11 loses warm state during sleep */ 576 if (dev->version > ('B' << 24 | 4 << 16 | 0 << 8 | 11 << 0)) 577 dev->warm = false; 578 579 cmd_init(&cmd, "\x13", 1, 0); 580 ret = si2168_cmd_execute(client, &cmd); 581 if (ret) 582 goto err; 583 584 return 0; 585 err: 586 dev_dbg(&client->dev, "failed=%d\n", ret); 587 return ret; 588 } 589 590 static int si2168_get_tune_settings(struct dvb_frontend *fe, 591 struct dvb_frontend_tune_settings *s) 592 { 593 s->min_delay_ms = 900; 594 595 return 0; 596 } 597 598 static int si2168_select(struct i2c_mux_core *muxc, u32 chan) 599 { 600 struct i2c_client *client = i2c_mux_priv(muxc); 601 int ret; 602 struct si2168_cmd cmd; 603 604 /* open I2C gate */ 605 cmd_init(&cmd, "\xc0\x0d\x01", 3, 0); 606 ret = si2168_cmd_execute(client, &cmd); 607 if (ret) 608 goto err; 609 610 return 0; 611 err: 612 dev_dbg(&client->dev, "failed=%d\n", ret); 613 return ret; 614 } 615 616 static int si2168_deselect(struct i2c_mux_core *muxc, u32 chan) 617 { 618 struct i2c_client *client = i2c_mux_priv(muxc); 619 int ret; 620 struct si2168_cmd cmd; 621 622 /* close I2C gate */ 623 cmd_init(&cmd, "\xc0\x0d\x00", 3, 0); 624 ret = si2168_cmd_execute(client, &cmd); 625 if (ret) 626 goto err; 627 628 return 0; 629 err: 630 dev_dbg(&client->dev, "failed=%d\n", ret); 631 return ret; 632 } 633 634 static const struct dvb_frontend_ops si2168_ops = { 635 .delsys = {SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A}, 636 .info = { 637 .name = "Silicon Labs Si2168", 638 .frequency_min_hz = 48 * MHz, 639 .frequency_max_hz = 870 * MHz, 640 .frequency_stepsize_hz = 62500, 641 .symbol_rate_min = 1000000, 642 .symbol_rate_max = 7200000, 643 .caps = FE_CAN_FEC_1_2 | 644 FE_CAN_FEC_2_3 | 645 FE_CAN_FEC_3_4 | 646 FE_CAN_FEC_5_6 | 647 FE_CAN_FEC_7_8 | 648 FE_CAN_FEC_AUTO | 649 FE_CAN_QPSK | 650 FE_CAN_QAM_16 | 651 FE_CAN_QAM_32 | 652 FE_CAN_QAM_64 | 653 FE_CAN_QAM_128 | 654 FE_CAN_QAM_256 | 655 FE_CAN_QAM_AUTO | 656 FE_CAN_TRANSMISSION_MODE_AUTO | 657 FE_CAN_GUARD_INTERVAL_AUTO | 658 FE_CAN_HIERARCHY_AUTO | 659 FE_CAN_MUTE_TS | 660 FE_CAN_2G_MODULATION | 661 FE_CAN_MULTISTREAM 662 }, 663 664 .get_tune_settings = si2168_get_tune_settings, 665 666 .init = si2168_init, 667 .sleep = si2168_sleep, 668 .resume = si2168_resume, 669 670 .set_frontend = si2168_set_frontend, 671 672 .read_status = si2168_read_status, 673 }; 674 675 static int si2168_probe(struct i2c_client *client, 676 const struct i2c_device_id *id) 677 { 678 struct si2168_config *config = client->dev.platform_data; 679 struct si2168_dev *dev; 680 int ret; 681 struct si2168_cmd cmd; 682 683 dev_dbg(&client->dev, "\n"); 684 685 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 686 if (!dev) { 687 ret = -ENOMEM; 688 goto err; 689 } 690 691 i2c_set_clientdata(client, dev); 692 mutex_init(&dev->i2c_mutex); 693 694 /* Initialize */ 695 cmd_init(&cmd, "\xc0\x12\x00\x0c\x00\x0d\x16\x00\x00\x00\x00\x00\x00", 696 13, 0); 697 ret = si2168_cmd_execute(client, &cmd); 698 if (ret) 699 goto err_kfree; 700 701 /* Power up */ 702 cmd_init(&cmd, "\xc0\x06\x01\x0f\x00\x20\x20\x01", 8, 1); 703 ret = si2168_cmd_execute(client, &cmd); 704 if (ret) 705 goto err_kfree; 706 707 /* Query chip revision */ 708 cmd_init(&cmd, "\x02", 1, 13); 709 ret = si2168_cmd_execute(client, &cmd); 710 if (ret) 711 goto err_kfree; 712 713 dev->chip_id = cmd.args[1] << 24 | cmd.args[2] << 16 | 714 cmd.args[3] << 8 | cmd.args[4] << 0; 715 716 switch (dev->chip_id) { 717 case SI2168_CHIP_ID_A20: 718 dev->firmware_name = SI2168_A20_FIRMWARE; 719 break; 720 case SI2168_CHIP_ID_A30: 721 dev->firmware_name = SI2168_A30_FIRMWARE; 722 break; 723 case SI2168_CHIP_ID_B40: 724 dev->firmware_name = SI2168_B40_FIRMWARE; 725 break; 726 case SI2168_CHIP_ID_D60: 727 dev->firmware_name = SI2168_D60_FIRMWARE; 728 break; 729 default: 730 dev_dbg(&client->dev, "unknown chip version Si21%d-%c%c%c\n", 731 cmd.args[2], cmd.args[1], cmd.args[3], cmd.args[4]); 732 ret = -ENODEV; 733 goto err_kfree; 734 } 735 736 dev->version = (cmd.args[1]) << 24 | (cmd.args[3] - '0') << 16 | 737 (cmd.args[4] - '0') << 8 | (cmd.args[5]) << 0; 738 739 /* create mux i2c adapter for tuner */ 740 dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, 741 1, 0, I2C_MUX_LOCKED, 742 si2168_select, si2168_deselect); 743 if (!dev->muxc) { 744 ret = -ENOMEM; 745 goto err_kfree; 746 } 747 dev->muxc->priv = client; 748 ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0); 749 if (ret) 750 goto err_kfree; 751 752 /* create dvb_frontend */ 753 memcpy(&dev->fe.ops, &si2168_ops, sizeof(struct dvb_frontend_ops)); 754 dev->fe.demodulator_priv = client; 755 *config->i2c_adapter = dev->muxc->adapter[0]; 756 *config->fe = &dev->fe; 757 dev->ts_mode = config->ts_mode; 758 dev->ts_clock_inv = config->ts_clock_inv; 759 dev->ts_clock_gapped = config->ts_clock_gapped; 760 dev->spectral_inversion = config->spectral_inversion; 761 762 dev_info(&client->dev, "Silicon Labs Si2168-%c%d%d successfully identified\n", 763 dev->version >> 24 & 0xff, dev->version >> 16 & 0xff, 764 dev->version >> 8 & 0xff); 765 dev_info(&client->dev, "firmware version: %c %d.%d.%d\n", 766 dev->version >> 24 & 0xff, dev->version >> 16 & 0xff, 767 dev->version >> 8 & 0xff, dev->version >> 0 & 0xff); 768 769 return 0; 770 err_kfree: 771 kfree(dev); 772 err: 773 dev_warn(&client->dev, "probe failed = %d\n", ret); 774 return ret; 775 } 776 777 static int si2168_remove(struct i2c_client *client) 778 { 779 struct si2168_dev *dev = i2c_get_clientdata(client); 780 781 dev_dbg(&client->dev, "\n"); 782 783 i2c_mux_del_adapters(dev->muxc); 784 785 dev->fe.ops.release = NULL; 786 dev->fe.demodulator_priv = NULL; 787 788 kfree(dev); 789 790 return 0; 791 } 792 793 static const struct i2c_device_id si2168_id_table[] = { 794 {"si2168", 0}, 795 {} 796 }; 797 MODULE_DEVICE_TABLE(i2c, si2168_id_table); 798 799 static struct i2c_driver si2168_driver = { 800 .driver = { 801 .name = "si2168", 802 .suppress_bind_attrs = true, 803 }, 804 .probe = si2168_probe, 805 .remove = si2168_remove, 806 .id_table = si2168_id_table, 807 }; 808 809 module_i2c_driver(si2168_driver); 810 811 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 812 MODULE_DESCRIPTION("Silicon Labs Si2168 DVB-T/T2/C demodulator driver"); 813 MODULE_LICENSE("GPL"); 814 MODULE_FIRMWARE(SI2168_A20_FIRMWARE); 815 MODULE_FIRMWARE(SI2168_A30_FIRMWARE); 816 MODULE_FIRMWARE(SI2168_B40_FIRMWARE); 817 MODULE_FIRMWARE(SI2168_D60_FIRMWARE); 818