1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Realtek RTL2832 DVB-T demodulator driver
4  *
5  * Copyright (C) 2012 Thomas Mair <thomas.mair86@gmail.com>
6  * Copyright (C) 2012-2014 Antti Palosaari <crope@iki.fi>
7  */
8 
9 #include "rtl2832_priv.h"
10 
11 #define REG_MASK(b) (BIT(b + 1) - 1)
12 
13 static const struct rtl2832_reg_entry registers[] = {
14 	[DVBT_SOFT_RST]		= {0x101,  2, 2},
15 	[DVBT_IIC_REPEAT]	= {0x101,  3, 3},
16 	[DVBT_TR_WAIT_MIN_8K]	= {0x188, 11, 2},
17 	[DVBT_RSD_BER_FAIL_VAL]	= {0x18f, 15, 0},
18 	[DVBT_EN_BK_TRK]	= {0x1a6,  7, 7},
19 	[DVBT_AD_EN_REG]	= {0x008,  7, 7},
20 	[DVBT_AD_EN_REG1]	= {0x008,  6, 6},
21 	[DVBT_EN_BBIN]		= {0x1b1,  0, 0},
22 	[DVBT_MGD_THD0]		= {0x195,  7, 0},
23 	[DVBT_MGD_THD1]		= {0x196,  7, 0},
24 	[DVBT_MGD_THD2]		= {0x197,  7, 0},
25 	[DVBT_MGD_THD3]		= {0x198,  7, 0},
26 	[DVBT_MGD_THD4]		= {0x199,  7, 0},
27 	[DVBT_MGD_THD5]		= {0x19a,  7, 0},
28 	[DVBT_MGD_THD6]		= {0x19b,  7, 0},
29 	[DVBT_MGD_THD7]		= {0x19c,  7, 0},
30 	[DVBT_EN_CACQ_NOTCH]	= {0x161,  4, 4},
31 	[DVBT_AD_AV_REF]	= {0x009,  6, 0},
32 	[DVBT_REG_PI]		= {0x00a,  2, 0},
33 	[DVBT_PIP_ON]		= {0x021,  3, 3},
34 	[DVBT_SCALE1_B92]	= {0x292,  7, 0},
35 	[DVBT_SCALE1_B93]	= {0x293,  7, 0},
36 	[DVBT_SCALE1_BA7]	= {0x2a7,  7, 0},
37 	[DVBT_SCALE1_BA9]	= {0x2a9,  7, 0},
38 	[DVBT_SCALE1_BAA]	= {0x2aa,  7, 0},
39 	[DVBT_SCALE1_BAB]	= {0x2ab,  7, 0},
40 	[DVBT_SCALE1_BAC]	= {0x2ac,  7, 0},
41 	[DVBT_SCALE1_BB0]	= {0x2b0,  7, 0},
42 	[DVBT_SCALE1_BB1]	= {0x2b1,  7, 0},
43 	[DVBT_KB_P1]		= {0x164,  3, 1},
44 	[DVBT_KB_P2]		= {0x164,  6, 4},
45 	[DVBT_KB_P3]		= {0x165,  2, 0},
46 	[DVBT_OPT_ADC_IQ]	= {0x006,  5, 4},
47 	[DVBT_AD_AVI]		= {0x009,  1, 0},
48 	[DVBT_AD_AVQ]		= {0x009,  3, 2},
49 	[DVBT_K1_CR_STEP12]	= {0x2ad,  9, 4},
50 	[DVBT_TRK_KS_P2]	= {0x16f,  2, 0},
51 	[DVBT_TRK_KS_I2]	= {0x170,  5, 3},
52 	[DVBT_TR_THD_SET2]	= {0x172,  3, 0},
53 	[DVBT_TRK_KC_P2]	= {0x173,  5, 3},
54 	[DVBT_TRK_KC_I2]	= {0x175,  2, 0},
55 	[DVBT_CR_THD_SET2]	= {0x176,  7, 6},
56 	[DVBT_PSET_IFFREQ]	= {0x119, 21, 0},
57 	[DVBT_SPEC_INV]		= {0x115,  0, 0},
58 	[DVBT_RSAMP_RATIO]	= {0x19f, 27, 2},
59 	[DVBT_CFREQ_OFF_RATIO]	= {0x19d, 23, 4},
60 	[DVBT_FSM_STAGE]	= {0x351,  6, 3},
61 	[DVBT_RX_CONSTEL]	= {0x33c,  3, 2},
62 	[DVBT_RX_HIER]		= {0x33c,  6, 4},
63 	[DVBT_RX_C_RATE_LP]	= {0x33d,  2, 0},
64 	[DVBT_RX_C_RATE_HP]	= {0x33d,  5, 3},
65 	[DVBT_GI_IDX]		= {0x351,  1, 0},
66 	[DVBT_FFT_MODE_IDX]	= {0x351,  2, 2},
67 	[DVBT_RSD_BER_EST]	= {0x34e, 15, 0},
68 	[DVBT_CE_EST_EVM]	= {0x40c, 15, 0},
69 	[DVBT_RF_AGC_VAL]	= {0x35b, 13, 0},
70 	[DVBT_IF_AGC_VAL]	= {0x359, 13, 0},
71 	[DVBT_DAGC_VAL]		= {0x305,  7, 0},
72 	[DVBT_SFREQ_OFF]	= {0x318, 13, 0},
73 	[DVBT_CFREQ_OFF]	= {0x35f, 17, 0},
74 	[DVBT_POLAR_RF_AGC]	= {0x00e,  1, 1},
75 	[DVBT_POLAR_IF_AGC]	= {0x00e,  0, 0},
76 	[DVBT_AAGC_HOLD]	= {0x104,  5, 5},
77 	[DVBT_EN_RF_AGC]	= {0x104,  6, 6},
78 	[DVBT_EN_IF_AGC]	= {0x104,  7, 7},
79 	[DVBT_IF_AGC_MIN]	= {0x108,  7, 0},
80 	[DVBT_IF_AGC_MAX]	= {0x109,  7, 0},
81 	[DVBT_RF_AGC_MIN]	= {0x10a,  7, 0},
82 	[DVBT_RF_AGC_MAX]	= {0x10b,  7, 0},
83 	[DVBT_IF_AGC_MAN]	= {0x10c,  6, 6},
84 	[DVBT_IF_AGC_MAN_VAL]	= {0x10c, 13, 0},
85 	[DVBT_RF_AGC_MAN]	= {0x10e,  6, 6},
86 	[DVBT_RF_AGC_MAN_VAL]	= {0x10e, 13, 0},
87 	[DVBT_DAGC_TRG_VAL]	= {0x112,  7, 0},
88 	[DVBT_AGC_TARG_VAL_0]	= {0x102,  0, 0},
89 	[DVBT_AGC_TARG_VAL_8_1]	= {0x103,  7, 0},
90 	[DVBT_AAGC_LOOP_GAIN]	= {0x1c7,  5, 1},
91 	[DVBT_LOOP_GAIN2_3_0]	= {0x104,  4, 1},
92 	[DVBT_LOOP_GAIN2_4]	= {0x105,  7, 7},
93 	[DVBT_LOOP_GAIN3]	= {0x1c8,  4, 0},
94 	[DVBT_VTOP1]		= {0x106,  5, 0},
95 	[DVBT_VTOP2]		= {0x1c9,  5, 0},
96 	[DVBT_VTOP3]		= {0x1ca,  5, 0},
97 	[DVBT_KRF1]		= {0x1cb,  7, 0},
98 	[DVBT_KRF2]		= {0x107,  7, 0},
99 	[DVBT_KRF3]		= {0x1cd,  7, 0},
100 	[DVBT_KRF4]		= {0x1ce,  7, 0},
101 	[DVBT_EN_GI_PGA]	= {0x1e5,  0, 0},
102 	[DVBT_THD_LOCK_UP]	= {0x1d9,  8, 0},
103 	[DVBT_THD_LOCK_DW]	= {0x1db,  8, 0},
104 	[DVBT_THD_UP1]		= {0x1dd,  7, 0},
105 	[DVBT_THD_DW1]		= {0x1de,  7, 0},
106 	[DVBT_INTER_CNT_LEN]	= {0x1d8,  3, 0},
107 	[DVBT_GI_PGA_STATE]	= {0x1e6,  3, 3},
108 	[DVBT_EN_AGC_PGA]	= {0x1d7,  0, 0},
109 	[DVBT_CKOUTPAR]		= {0x17b,  5, 5},
110 	[DVBT_CKOUT_PWR]	= {0x17b,  6, 6},
111 	[DVBT_SYNC_DUR]		= {0x17b,  7, 7},
112 	[DVBT_ERR_DUR]		= {0x17c,  0, 0},
113 	[DVBT_SYNC_LVL]		= {0x17c,  1, 1},
114 	[DVBT_ERR_LVL]		= {0x17c,  2, 2},
115 	[DVBT_VAL_LVL]		= {0x17c,  3, 3},
116 	[DVBT_SERIAL]		= {0x17c,  4, 4},
117 	[DVBT_SER_LSB]		= {0x17c,  5, 5},
118 	[DVBT_CDIV_PH0]		= {0x17d,  3, 0},
119 	[DVBT_CDIV_PH1]		= {0x17d,  7, 4},
120 	[DVBT_MPEG_IO_OPT_2_2]	= {0x006,  7, 7},
121 	[DVBT_MPEG_IO_OPT_1_0]	= {0x007,  7, 6},
122 	[DVBT_CKOUTPAR_PIP]	= {0x0b7,  4, 4},
123 	[DVBT_CKOUT_PWR_PIP]	= {0x0b7,  3, 3},
124 	[DVBT_SYNC_LVL_PIP]	= {0x0b7,  2, 2},
125 	[DVBT_ERR_LVL_PIP]	= {0x0b7,  1, 1},
126 	[DVBT_VAL_LVL_PIP]	= {0x0b7,  0, 0},
127 	[DVBT_CKOUTPAR_PID]	= {0x0b9,  4, 4},
128 	[DVBT_CKOUT_PWR_PID]	= {0x0b9,  3, 3},
129 	[DVBT_SYNC_LVL_PID]	= {0x0b9,  2, 2},
130 	[DVBT_ERR_LVL_PID]	= {0x0b9,  1, 1},
131 	[DVBT_VAL_LVL_PID]	= {0x0b9,  0, 0},
132 	[DVBT_SM_PASS]		= {0x193, 11, 0},
133 	[DVBT_AD7_SETTING]	= {0x011, 15, 0},
134 	[DVBT_RSSI_R]		= {0x301,  6, 0},
135 	[DVBT_ACI_DET_IND]	= {0x312,  0, 0},
136 	[DVBT_REG_MON]		= {0x00d,  1, 0},
137 	[DVBT_REG_MONSEL]	= {0x00d,  2, 2},
138 	[DVBT_REG_GPE]		= {0x00d,  7, 7},
139 	[DVBT_REG_GPO]		= {0x010,  0, 0},
140 	[DVBT_REG_4MSEL]	= {0x013,  0, 0},
141 };
142 
143 static int rtl2832_rd_demod_reg(struct rtl2832_dev *dev, int reg, u32 *val)
144 {
145 	struct i2c_client *client = dev->client;
146 	int ret, i;
147 	u16 reg_start_addr;
148 	u8 msb, lsb, reading[4], len;
149 	u32 reading_tmp, mask;
150 
151 	reg_start_addr = registers[reg].start_address;
152 	msb = registers[reg].msb;
153 	lsb = registers[reg].lsb;
154 	len = (msb >> 3) + 1;
155 	mask = REG_MASK(msb - lsb);
156 
157 	ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len);
158 	if (ret)
159 		goto err;
160 
161 	reading_tmp = 0;
162 	for (i = 0; i < len; i++)
163 		reading_tmp |= reading[i] << ((len - 1 - i) * 8);
164 
165 	*val = (reading_tmp >> lsb) & mask;
166 
167 	return 0;
168 err:
169 	dev_dbg(&client->dev, "failed=%d\n", ret);
170 	return ret;
171 }
172 
173 static int rtl2832_wr_demod_reg(struct rtl2832_dev *dev, int reg, u32 val)
174 {
175 	struct i2c_client *client = dev->client;
176 	int ret, i;
177 	u16 reg_start_addr;
178 	u8 msb, lsb, reading[4], writing[4], len;
179 	u32 reading_tmp, writing_tmp, mask;
180 
181 	reg_start_addr = registers[reg].start_address;
182 	msb = registers[reg].msb;
183 	lsb = registers[reg].lsb;
184 	len = (msb >> 3) + 1;
185 	mask = REG_MASK(msb - lsb);
186 
187 	ret = regmap_bulk_read(dev->regmap, reg_start_addr, reading, len);
188 	if (ret)
189 		goto err;
190 
191 	reading_tmp = 0;
192 	for (i = 0; i < len; i++)
193 		reading_tmp |= reading[i] << ((len - 1 - i) * 8);
194 
195 	writing_tmp = reading_tmp & ~(mask << lsb);
196 	writing_tmp |= ((val & mask) << lsb);
197 
198 	for (i = 0; i < len; i++)
199 		writing[i] = (writing_tmp >> ((len - 1 - i) * 8)) & 0xff;
200 
201 	ret = regmap_bulk_write(dev->regmap, reg_start_addr, writing, len);
202 	if (ret)
203 		goto err;
204 
205 	return 0;
206 err:
207 	dev_dbg(&client->dev, "failed=%d\n", ret);
208 	return ret;
209 }
210 
211 static int rtl2832_set_if(struct dvb_frontend *fe, u32 if_freq)
212 {
213 	struct rtl2832_dev *dev = fe->demodulator_priv;
214 	struct i2c_client *client = dev->client;
215 	int ret;
216 	u64 pset_iffreq;
217 	u8 en_bbin = (if_freq == 0 ? 0x1 : 0x0);
218 
219 	/*
220 	* PSET_IFFREQ = - floor((IfFreqHz % CrystalFreqHz) * pow(2, 22)
221 	*		/ CrystalFreqHz)
222 	*/
223 	pset_iffreq = if_freq % dev->pdata->clk;
224 	pset_iffreq *= 0x400000;
225 	pset_iffreq = div_u64(pset_iffreq, dev->pdata->clk);
226 	pset_iffreq = -pset_iffreq;
227 	pset_iffreq = pset_iffreq & 0x3fffff;
228 	dev_dbg(&client->dev, "if_frequency=%d pset_iffreq=%08x\n",
229 		if_freq, (unsigned)pset_iffreq);
230 
231 	ret = rtl2832_wr_demod_reg(dev, DVBT_EN_BBIN, en_bbin);
232 	if (ret)
233 		goto err;
234 
235 	ret = rtl2832_wr_demod_reg(dev, DVBT_PSET_IFFREQ, pset_iffreq);
236 	if (ret)
237 		goto err;
238 
239 	return 0;
240 err:
241 	dev_dbg(&client->dev, "failed=%d\n", ret);
242 	return ret;
243 }
244 
245 static int rtl2832_init(struct dvb_frontend *fe)
246 {
247 	struct rtl2832_dev *dev = fe->demodulator_priv;
248 	struct i2c_client *client = dev->client;
249 	struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
250 	const struct rtl2832_reg_value *init;
251 	int i, ret, len;
252 	/* initialization values for the demodulator registers */
253 	struct rtl2832_reg_value rtl2832_initial_regs[] = {
254 		{DVBT_AD_EN_REG,		0x1},
255 		{DVBT_AD_EN_REG1,		0x1},
256 		{DVBT_RSD_BER_FAIL_VAL,		0x2800},
257 		{DVBT_MGD_THD0,			0x10},
258 		{DVBT_MGD_THD1,			0x20},
259 		{DVBT_MGD_THD2,			0x20},
260 		{DVBT_MGD_THD3,			0x40},
261 		{DVBT_MGD_THD4,			0x22},
262 		{DVBT_MGD_THD5,			0x32},
263 		{DVBT_MGD_THD6,			0x37},
264 		{DVBT_MGD_THD7,			0x39},
265 		{DVBT_EN_BK_TRK,		0x0},
266 		{DVBT_EN_CACQ_NOTCH,		0x0},
267 		{DVBT_AD_AV_REF,		0x2a},
268 		{DVBT_REG_PI,			0x6},
269 		{DVBT_PIP_ON,			0x0},
270 		{DVBT_CDIV_PH0,			0x8},
271 		{DVBT_CDIV_PH1,			0x8},
272 		{DVBT_SCALE1_B92,		0x4},
273 		{DVBT_SCALE1_B93,		0xb0},
274 		{DVBT_SCALE1_BA7,		0x78},
275 		{DVBT_SCALE1_BA9,		0x28},
276 		{DVBT_SCALE1_BAA,		0x59},
277 		{DVBT_SCALE1_BAB,		0x83},
278 		{DVBT_SCALE1_BAC,		0xd4},
279 		{DVBT_SCALE1_BB0,		0x65},
280 		{DVBT_SCALE1_BB1,		0x43},
281 		{DVBT_KB_P1,			0x1},
282 		{DVBT_KB_P2,			0x4},
283 		{DVBT_KB_P3,			0x7},
284 		{DVBT_K1_CR_STEP12,		0xa},
285 		{DVBT_REG_GPE,			0x1},
286 		{DVBT_SERIAL,			0x0},
287 		{DVBT_CDIV_PH0,			0x9},
288 		{DVBT_CDIV_PH1,			0x9},
289 		{DVBT_MPEG_IO_OPT_2_2,		0x0},
290 		{DVBT_MPEG_IO_OPT_1_0,		0x0},
291 		{DVBT_TRK_KS_P2,		0x4},
292 		{DVBT_TRK_KS_I2,		0x7},
293 		{DVBT_TR_THD_SET2,		0x6},
294 		{DVBT_TRK_KC_I2,		0x5},
295 		{DVBT_CR_THD_SET2,		0x1},
296 	};
297 
298 	dev_dbg(&client->dev, "\n");
299 
300 	ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
301 	if (ret)
302 		goto err;
303 
304 	for (i = 0; i < ARRAY_SIZE(rtl2832_initial_regs); i++) {
305 		ret = rtl2832_wr_demod_reg(dev, rtl2832_initial_regs[i].reg,
306 			rtl2832_initial_regs[i].value);
307 		if (ret)
308 			goto err;
309 	}
310 
311 	/* load tuner specific settings */
312 	dev_dbg(&client->dev, "load settings for tuner=%02x\n",
313 		dev->pdata->tuner);
314 	switch (dev->pdata->tuner) {
315 	case RTL2832_TUNER_FC2580:
316 		len = ARRAY_SIZE(rtl2832_tuner_init_fc2580);
317 		init = rtl2832_tuner_init_fc2580;
318 		break;
319 	case RTL2832_TUNER_FC0012:
320 	case RTL2832_TUNER_FC0013:
321 		len = ARRAY_SIZE(rtl2832_tuner_init_fc0012);
322 		init = rtl2832_tuner_init_fc0012;
323 		break;
324 	case RTL2832_TUNER_TUA9001:
325 		len = ARRAY_SIZE(rtl2832_tuner_init_tua9001);
326 		init = rtl2832_tuner_init_tua9001;
327 		break;
328 	case RTL2832_TUNER_E4000:
329 		len = ARRAY_SIZE(rtl2832_tuner_init_e4000);
330 		init = rtl2832_tuner_init_e4000;
331 		break;
332 	case RTL2832_TUNER_R820T:
333 	case RTL2832_TUNER_R828D:
334 		len = ARRAY_SIZE(rtl2832_tuner_init_r820t);
335 		init = rtl2832_tuner_init_r820t;
336 		break;
337 	case RTL2832_TUNER_SI2157:
338 		len = ARRAY_SIZE(rtl2832_tuner_init_si2157);
339 		init = rtl2832_tuner_init_si2157;
340 		break;
341 	default:
342 		ret = -EINVAL;
343 		goto err;
344 	}
345 
346 	for (i = 0; i < len; i++) {
347 		ret = rtl2832_wr_demod_reg(dev, init[i].reg, init[i].value);
348 		if (ret)
349 			goto err;
350 	}
351 
352 	/* init stats here in order signal app which stats are supported */
353 	c->strength.len = 1;
354 	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
355 	c->cnr.len = 1;
356 	c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
357 	c->post_bit_error.len = 1;
358 	c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
359 	c->post_bit_count.len = 1;
360 	c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
361 	dev->sleeping = false;
362 
363 	return 0;
364 err:
365 	dev_dbg(&client->dev, "failed=%d\n", ret);
366 	return ret;
367 }
368 
369 static int rtl2832_sleep(struct dvb_frontend *fe)
370 {
371 	struct rtl2832_dev *dev = fe->demodulator_priv;
372 	struct i2c_client *client = dev->client;
373 	int ret;
374 
375 	dev_dbg(&client->dev, "\n");
376 
377 	dev->sleeping = true;
378 	dev->fe_status = 0;
379 
380 	ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
381 	if (ret)
382 		goto err;
383 
384 	return 0;
385 err:
386 	dev_dbg(&client->dev, "failed=%d\n", ret);
387 	return ret;
388 }
389 
390 static int rtl2832_get_tune_settings(struct dvb_frontend *fe,
391 	struct dvb_frontend_tune_settings *s)
392 {
393 	struct rtl2832_dev *dev = fe->demodulator_priv;
394 	struct i2c_client *client = dev->client;
395 
396 	dev_dbg(&client->dev, "\n");
397 	s->min_delay_ms = 1000;
398 	s->step_size = fe->ops.info.frequency_stepsize_hz * 2;
399 	s->max_drift = (fe->ops.info.frequency_stepsize_hz * 2) + 1;
400 	return 0;
401 }
402 
403 static int rtl2832_set_frontend(struct dvb_frontend *fe)
404 {
405 	struct rtl2832_dev *dev = fe->demodulator_priv;
406 	struct i2c_client *client = dev->client;
407 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
408 	int ret, i, j;
409 	u64 bw_mode, num, num2;
410 	u32 resamp_ratio, cfreq_off_ratio;
411 	static u8 bw_params[3][32] = {
412 	/* 6 MHz bandwidth */
413 		{
414 		0xf5, 0xff, 0x15, 0x38, 0x5d, 0x6d, 0x52, 0x07, 0xfa, 0x2f,
415 		0x53, 0xf5, 0x3f, 0xca, 0x0b, 0x91, 0xea, 0x30, 0x63, 0xb2,
416 		0x13, 0xda, 0x0b, 0xc4, 0x18, 0x7e, 0x16, 0x66, 0x08, 0x67,
417 		0x19, 0xe0,
418 		},
419 
420 	/*  7 MHz bandwidth */
421 		{
422 		0xe7, 0xcc, 0xb5, 0xba, 0xe8, 0x2f, 0x67, 0x61, 0x00, 0xaf,
423 		0x86, 0xf2, 0xbf, 0x59, 0x04, 0x11, 0xb6, 0x33, 0xa4, 0x30,
424 		0x15, 0x10, 0x0a, 0x42, 0x18, 0xf8, 0x17, 0xd9, 0x07, 0x22,
425 		0x19, 0x10,
426 		},
427 
428 	/*  8 MHz bandwidth */
429 		{
430 		0x09, 0xf6, 0xd2, 0xa7, 0x9a, 0xc9, 0x27, 0x77, 0x06, 0xbf,
431 		0xec, 0xf4, 0x4f, 0x0b, 0xfc, 0x01, 0x63, 0x35, 0x54, 0xa7,
432 		0x16, 0x66, 0x08, 0xb4, 0x19, 0x6e, 0x19, 0x65, 0x05, 0xc8,
433 		0x19, 0xe0,
434 		},
435 	};
436 
437 	dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u inversion=%u\n",
438 		c->frequency, c->bandwidth_hz, c->inversion);
439 
440 	/* program tuner */
441 	if (fe->ops.tuner_ops.set_params)
442 		fe->ops.tuner_ops.set_params(fe);
443 
444 	/* If the frontend has get_if_frequency(), use it */
445 	if (fe->ops.tuner_ops.get_if_frequency) {
446 		u32 if_freq;
447 
448 		ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_freq);
449 		if (ret)
450 			goto err;
451 
452 		ret = rtl2832_set_if(fe, if_freq);
453 		if (ret)
454 			goto err;
455 	}
456 
457 	switch (c->bandwidth_hz) {
458 	case 6000000:
459 		i = 0;
460 		bw_mode = 48000000;
461 		break;
462 	case 7000000:
463 		i = 1;
464 		bw_mode = 56000000;
465 		break;
466 	case 8000000:
467 		i = 2;
468 		bw_mode = 64000000;
469 		break;
470 	default:
471 		dev_err(&client->dev, "invalid bandwidth_hz %u\n",
472 			c->bandwidth_hz);
473 		ret = -EINVAL;
474 		goto err;
475 	}
476 
477 	for (j = 0; j < sizeof(bw_params[0]); j++) {
478 		ret = regmap_bulk_write(dev->regmap,
479 					0x11c + j, &bw_params[i][j], 1);
480 		if (ret)
481 			goto err;
482 	}
483 
484 	/* calculate and set resample ratio
485 	* RSAMP_RATIO = floor(CrystalFreqHz * 7 * pow(2, 22)
486 	*	/ ConstWithBandwidthMode)
487 	*/
488 	num = dev->pdata->clk * 7ULL;
489 	num *= 0x400000;
490 	num = div_u64(num, bw_mode);
491 	resamp_ratio =  num & 0x3ffffff;
492 	ret = rtl2832_wr_demod_reg(dev, DVBT_RSAMP_RATIO, resamp_ratio);
493 	if (ret)
494 		goto err;
495 
496 	/* calculate and set cfreq off ratio
497 	* CFREQ_OFF_RATIO = - floor(ConstWithBandwidthMode * pow(2, 20)
498 	*	/ (CrystalFreqHz * 7))
499 	*/
500 	num = bw_mode << 20;
501 	num2 = dev->pdata->clk * 7ULL;
502 	num = div_u64(num, num2);
503 	num = -num;
504 	cfreq_off_ratio = num & 0xfffff;
505 	ret = rtl2832_wr_demod_reg(dev, DVBT_CFREQ_OFF_RATIO, cfreq_off_ratio);
506 	if (ret)
507 		goto err;
508 
509 	/* soft reset */
510 	ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
511 	if (ret)
512 		goto err;
513 
514 	ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
515 	if (ret)
516 		goto err;
517 
518 	return 0;
519 err:
520 	dev_dbg(&client->dev, "failed=%d\n", ret);
521 	return ret;
522 }
523 
524 static int rtl2832_get_frontend(struct dvb_frontend *fe,
525 				struct dtv_frontend_properties *c)
526 {
527 	struct rtl2832_dev *dev = fe->demodulator_priv;
528 	struct i2c_client *client = dev->client;
529 	int ret;
530 	u8 buf[3];
531 
532 	if (dev->sleeping)
533 		return 0;
534 
535 	ret = regmap_bulk_read(dev->regmap, 0x33c, buf, 2);
536 	if (ret)
537 		goto err;
538 
539 	ret = regmap_bulk_read(dev->regmap, 0x351, &buf[2], 1);
540 	if (ret)
541 		goto err;
542 
543 	dev_dbg(&client->dev, "TPS=%*ph\n", 3, buf);
544 
545 	switch ((buf[0] >> 2) & 3) {
546 	case 0:
547 		c->modulation = QPSK;
548 		break;
549 	case 1:
550 		c->modulation = QAM_16;
551 		break;
552 	case 2:
553 		c->modulation = QAM_64;
554 		break;
555 	}
556 
557 	switch ((buf[2] >> 2) & 1) {
558 	case 0:
559 		c->transmission_mode = TRANSMISSION_MODE_2K;
560 		break;
561 	case 1:
562 		c->transmission_mode = TRANSMISSION_MODE_8K;
563 	}
564 
565 	switch ((buf[2] >> 0) & 3) {
566 	case 0:
567 		c->guard_interval = GUARD_INTERVAL_1_32;
568 		break;
569 	case 1:
570 		c->guard_interval = GUARD_INTERVAL_1_16;
571 		break;
572 	case 2:
573 		c->guard_interval = GUARD_INTERVAL_1_8;
574 		break;
575 	case 3:
576 		c->guard_interval = GUARD_INTERVAL_1_4;
577 		break;
578 	}
579 
580 	switch ((buf[0] >> 4) & 7) {
581 	case 0:
582 		c->hierarchy = HIERARCHY_NONE;
583 		break;
584 	case 1:
585 		c->hierarchy = HIERARCHY_1;
586 		break;
587 	case 2:
588 		c->hierarchy = HIERARCHY_2;
589 		break;
590 	case 3:
591 		c->hierarchy = HIERARCHY_4;
592 		break;
593 	}
594 
595 	switch ((buf[1] >> 3) & 7) {
596 	case 0:
597 		c->code_rate_HP = FEC_1_2;
598 		break;
599 	case 1:
600 		c->code_rate_HP = FEC_2_3;
601 		break;
602 	case 2:
603 		c->code_rate_HP = FEC_3_4;
604 		break;
605 	case 3:
606 		c->code_rate_HP = FEC_5_6;
607 		break;
608 	case 4:
609 		c->code_rate_HP = FEC_7_8;
610 		break;
611 	}
612 
613 	switch ((buf[1] >> 0) & 7) {
614 	case 0:
615 		c->code_rate_LP = FEC_1_2;
616 		break;
617 	case 1:
618 		c->code_rate_LP = FEC_2_3;
619 		break;
620 	case 2:
621 		c->code_rate_LP = FEC_3_4;
622 		break;
623 	case 3:
624 		c->code_rate_LP = FEC_5_6;
625 		break;
626 	case 4:
627 		c->code_rate_LP = FEC_7_8;
628 		break;
629 	}
630 
631 	return 0;
632 err:
633 	dev_dbg(&client->dev, "failed=%d\n", ret);
634 	return ret;
635 }
636 
637 static int rtl2832_read_status(struct dvb_frontend *fe, enum fe_status *status)
638 {
639 	struct rtl2832_dev *dev = fe->demodulator_priv;
640 	struct i2c_client *client = dev->client;
641 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
642 	int ret;
643 	u32 tmp;
644 	u8 u8tmp, buf[2];
645 	u16 u16tmp;
646 
647 	dev_dbg(&client->dev, "\n");
648 
649 	*status = 0;
650 	if (dev->sleeping)
651 		return 0;
652 
653 	ret = rtl2832_rd_demod_reg(dev, DVBT_FSM_STAGE, &tmp);
654 	if (ret)
655 		goto err;
656 
657 	if (tmp == 11) {
658 		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
659 				FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
660 	} else if (tmp == 10) {
661 		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
662 				FE_HAS_VITERBI;
663 	}
664 
665 	dev->fe_status = *status;
666 
667 	/* signal strength */
668 	if (dev->fe_status & FE_HAS_SIGNAL) {
669 		/* read digital AGC */
670 		ret = regmap_bulk_read(dev->regmap, 0x305, &u8tmp, 1);
671 		if (ret)
672 			goto err;
673 
674 		dev_dbg(&client->dev, "digital agc=%02x", u8tmp);
675 
676 		u8tmp = ~u8tmp;
677 		u16tmp = u8tmp << 8 | u8tmp << 0;
678 
679 		c->strength.stat[0].scale = FE_SCALE_RELATIVE;
680 		c->strength.stat[0].uvalue = u16tmp;
681 	} else {
682 		c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
683 	}
684 
685 	/* CNR */
686 	if (dev->fe_status & FE_HAS_VITERBI) {
687 		unsigned hierarchy, constellation;
688 		#define CONSTELLATION_NUM 3
689 		#define HIERARCHY_NUM 4
690 		static const u32 constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
691 			{85387325, 85387325, 85387325, 85387325},
692 			{86676178, 86676178, 87167949, 87795660},
693 			{87659938, 87659938, 87885178, 88241743},
694 		};
695 
696 		ret = regmap_bulk_read(dev->regmap, 0x33c, &u8tmp, 1);
697 		if (ret)
698 			goto err;
699 
700 		constellation = (u8tmp >> 2) & 0x03; /* [3:2] */
701 		ret = -EINVAL;
702 		if (constellation > CONSTELLATION_NUM - 1)
703 			goto err;
704 
705 		hierarchy = (u8tmp >> 4) & 0x07; /* [6:4] */
706 		if (hierarchy > HIERARCHY_NUM - 1)
707 			goto err;
708 
709 		ret = regmap_bulk_read(dev->regmap, 0x40c, buf, 2);
710 		if (ret)
711 			goto err;
712 
713 		u16tmp = buf[0] << 8 | buf[1] << 0;
714 		if (u16tmp)
715 			tmp = (constant[constellation][hierarchy] -
716 			       intlog10(u16tmp)) / ((1 << 24) / 10000);
717 		else
718 			tmp = 0;
719 
720 		dev_dbg(&client->dev, "cnr raw=%u\n", u16tmp);
721 
722 		c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
723 		c->cnr.stat[0].svalue = tmp;
724 	} else {
725 		c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
726 	}
727 
728 	/* BER */
729 	if (dev->fe_status & FE_HAS_LOCK) {
730 		ret = regmap_bulk_read(dev->regmap, 0x34e, buf, 2);
731 		if (ret)
732 			goto err;
733 
734 		u16tmp = buf[0] << 8 | buf[1] << 0;
735 		dev->post_bit_error += u16tmp;
736 		dev->post_bit_count += 1000000;
737 
738 		dev_dbg(&client->dev, "ber errors=%u total=1000000\n", u16tmp);
739 
740 		c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
741 		c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
742 		c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
743 		c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
744 	} else {
745 		c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
746 		c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
747 	}
748 
749 	return 0;
750 err:
751 	dev_dbg(&client->dev, "failed=%d\n", ret);
752 	return ret;
753 }
754 
755 static int rtl2832_read_snr(struct dvb_frontend *fe, u16 *snr)
756 {
757 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
758 
759 	/* report SNR in resolution of 0.1 dB */
760 	if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
761 		*snr = div_s64(c->cnr.stat[0].svalue, 100);
762 	else
763 		*snr = 0;
764 
765 	return 0;
766 }
767 
768 static int rtl2832_read_ber(struct dvb_frontend *fe, u32 *ber)
769 {
770 	struct rtl2832_dev *dev = fe->demodulator_priv;
771 
772 	*ber = (dev->post_bit_error - dev->post_bit_error_prev);
773 	dev->post_bit_error_prev = dev->post_bit_error;
774 
775 	return 0;
776 }
777 
778 /*
779  * I2C gate/mux/repeater logic
780  * There is delay mechanism to avoid unneeded I2C gate open / close. Gate close
781  * is delayed here a little bit in order to see if there is sequence of I2C
782  * messages sent to same I2C bus.
783  */
784 static void rtl2832_i2c_gate_work(struct work_struct *work)
785 {
786 	struct rtl2832_dev *dev = container_of(work, struct rtl2832_dev, i2c_gate_work.work);
787 	struct i2c_client *client = dev->client;
788 	int ret;
789 
790 	/* close gate */
791 	ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x00);
792 	if (ret)
793 		goto err;
794 
795 	return;
796 err:
797 	dev_dbg(&client->dev, "failed=%d\n", ret);
798 }
799 
800 static int rtl2832_select(struct i2c_mux_core *muxc, u32 chan_id)
801 {
802 	struct rtl2832_dev *dev = i2c_mux_priv(muxc);
803 	struct i2c_client *client = dev->client;
804 	int ret;
805 
806 	/* terminate possible gate closing */
807 	cancel_delayed_work(&dev->i2c_gate_work);
808 
809 	/* open gate */
810 	ret = regmap_update_bits(dev->regmap, 0x101, 0x08, 0x08);
811 	if (ret)
812 		goto err;
813 
814 	return 0;
815 err:
816 	dev_dbg(&client->dev, "failed=%d\n", ret);
817 	return ret;
818 }
819 
820 static int rtl2832_deselect(struct i2c_mux_core *muxc, u32 chan_id)
821 {
822 	struct rtl2832_dev *dev = i2c_mux_priv(muxc);
823 
824 	schedule_delayed_work(&dev->i2c_gate_work, usecs_to_jiffies(100));
825 	return 0;
826 }
827 
828 static const struct dvb_frontend_ops rtl2832_ops = {
829 	.delsys = { SYS_DVBT },
830 	.info = {
831 		.name = "Realtek RTL2832 (DVB-T)",
832 		.frequency_min_hz	= 174 * MHz,
833 		.frequency_max_hz	= 862 * MHz,
834 		.frequency_stepsize_hz	= 166667,
835 		.caps = FE_CAN_FEC_1_2 |
836 			FE_CAN_FEC_2_3 |
837 			FE_CAN_FEC_3_4 |
838 			FE_CAN_FEC_5_6 |
839 			FE_CAN_FEC_7_8 |
840 			FE_CAN_FEC_AUTO |
841 			FE_CAN_QPSK |
842 			FE_CAN_QAM_16 |
843 			FE_CAN_QAM_64 |
844 			FE_CAN_QAM_AUTO |
845 			FE_CAN_TRANSMISSION_MODE_AUTO |
846 			FE_CAN_GUARD_INTERVAL_AUTO |
847 			FE_CAN_HIERARCHY_AUTO |
848 			FE_CAN_RECOVER |
849 			FE_CAN_MUTE_TS
850 	 },
851 
852 	.init = rtl2832_init,
853 	.sleep = rtl2832_sleep,
854 
855 	.get_tune_settings = rtl2832_get_tune_settings,
856 
857 	.set_frontend = rtl2832_set_frontend,
858 	.get_frontend = rtl2832_get_frontend,
859 
860 	.read_status = rtl2832_read_status,
861 	.read_snr = rtl2832_read_snr,
862 	.read_ber = rtl2832_read_ber,
863 };
864 
865 static bool rtl2832_volatile_reg(struct device *dev, unsigned int reg)
866 {
867 	switch (reg) {
868 	case 0x305:
869 	case 0x33c:
870 	case 0x34e:
871 	case 0x351:
872 	case 0x40c ... 0x40d:
873 		return true;
874 	default:
875 		break;
876 	}
877 
878 	return false;
879 }
880 
881 static struct dvb_frontend *rtl2832_get_dvb_frontend(struct i2c_client *client)
882 {
883 	struct rtl2832_dev *dev = i2c_get_clientdata(client);
884 
885 	dev_dbg(&client->dev, "\n");
886 	return &dev->fe;
887 }
888 
889 static struct i2c_adapter *rtl2832_get_i2c_adapter(struct i2c_client *client)
890 {
891 	struct rtl2832_dev *dev = i2c_get_clientdata(client);
892 
893 	dev_dbg(&client->dev, "\n");
894 	return dev->muxc->adapter[0];
895 }
896 
897 static int rtl2832_slave_ts_ctrl(struct i2c_client *client, bool enable)
898 {
899 	struct rtl2832_dev *dev = i2c_get_clientdata(client);
900 	int ret;
901 
902 	dev_dbg(&client->dev, "enable=%d\n", enable);
903 
904 	if (enable) {
905 		ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x0);
906 		if (ret)
907 			goto err;
908 		ret = regmap_bulk_write(dev->regmap, 0x10c, "\x5f\xff", 2);
909 		if (ret)
910 			goto err;
911 		ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x1);
912 		if (ret)
913 			goto err;
914 		ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x18", 1);
915 		if (ret)
916 			goto err;
917 		ret = regmap_bulk_write(dev->regmap, 0x192, "\x7f\xf7\xff", 3);
918 		if (ret)
919 			goto err;
920 	} else {
921 		ret = regmap_bulk_write(dev->regmap, 0x192, "\x00\x0f\xff", 3);
922 		if (ret)
923 			goto err;
924 		ret = regmap_bulk_write(dev->regmap, 0x0bc, "\x08", 1);
925 		if (ret)
926 			goto err;
927 		ret = rtl2832_wr_demod_reg(dev, DVBT_PIP_ON, 0x0);
928 		if (ret)
929 			goto err;
930 		ret = regmap_bulk_write(dev->regmap, 0x10c, "\x00\x00", 2);
931 		if (ret)
932 			goto err;
933 		ret = rtl2832_wr_demod_reg(dev, DVBT_SOFT_RST, 0x1);
934 		if (ret)
935 			goto err;
936 	}
937 
938 	dev->slave_ts = enable;
939 
940 	return 0;
941 err:
942 	dev_dbg(&client->dev, "failed=%d\n", ret);
943 	return ret;
944 }
945 
946 static int rtl2832_pid_filter_ctrl(struct dvb_frontend *fe, int onoff)
947 {
948 	struct rtl2832_dev *dev = fe->demodulator_priv;
949 	struct i2c_client *client = dev->client;
950 	int ret;
951 	u8 u8tmp;
952 
953 	dev_dbg(&client->dev, "onoff=%d, slave_ts=%d\n", onoff, dev->slave_ts);
954 
955 	/* enable / disable PID filter */
956 	if (onoff)
957 		u8tmp = 0x80;
958 	else
959 		u8tmp = 0x00;
960 
961 	if (dev->slave_ts)
962 		ret = regmap_update_bits(dev->regmap, 0x021, 0xc0, u8tmp);
963 	else
964 		ret = regmap_update_bits(dev->regmap, 0x061, 0xc0, u8tmp);
965 	if (ret)
966 		goto err;
967 
968 	return 0;
969 err:
970 	dev_dbg(&client->dev, "failed=%d\n", ret);
971 	return ret;
972 }
973 
974 static int rtl2832_pid_filter(struct dvb_frontend *fe, u8 index, u16 pid,
975 			      int onoff)
976 {
977 	struct rtl2832_dev *dev = fe->demodulator_priv;
978 	struct i2c_client *client = dev->client;
979 	int ret;
980 	u8 buf[4];
981 
982 	dev_dbg(&client->dev, "index=%d pid=%04x onoff=%d slave_ts=%d\n",
983 		index, pid, onoff, dev->slave_ts);
984 
985 	/* skip invalid PIDs (0x2000) */
986 	if (pid > 0x1fff || index > 32)
987 		return 0;
988 
989 	if (onoff)
990 		set_bit(index, &dev->filters);
991 	else
992 		clear_bit(index, &dev->filters);
993 
994 	/* enable / disable PIDs */
995 	buf[0] = (dev->filters >>  0) & 0xff;
996 	buf[1] = (dev->filters >>  8) & 0xff;
997 	buf[2] = (dev->filters >> 16) & 0xff;
998 	buf[3] = (dev->filters >> 24) & 0xff;
999 
1000 	if (dev->slave_ts)
1001 		ret = regmap_bulk_write(dev->regmap, 0x022, buf, 4);
1002 	else
1003 		ret = regmap_bulk_write(dev->regmap, 0x062, buf, 4);
1004 	if (ret)
1005 		goto err;
1006 
1007 	/* add PID */
1008 	buf[0] = (pid >> 8) & 0xff;
1009 	buf[1] = (pid >> 0) & 0xff;
1010 
1011 	if (dev->slave_ts)
1012 		ret = regmap_bulk_write(dev->regmap, 0x026 + 2 * index, buf, 2);
1013 	else
1014 		ret = regmap_bulk_write(dev->regmap, 0x066 + 2 * index, buf, 2);
1015 	if (ret)
1016 		goto err;
1017 
1018 	return 0;
1019 err:
1020 	dev_dbg(&client->dev, "failed=%d\n", ret);
1021 	return ret;
1022 }
1023 
1024 static int rtl2832_probe(struct i2c_client *client)
1025 {
1026 	struct rtl2832_platform_data *pdata = client->dev.platform_data;
1027 	struct i2c_adapter *i2c = client->adapter;
1028 	struct rtl2832_dev *dev;
1029 	int ret;
1030 	u8 tmp;
1031 	static const struct regmap_range_cfg regmap_range_cfg[] = {
1032 		{
1033 			.selector_reg     = 0x00,
1034 			.selector_mask    = 0xff,
1035 			.selector_shift   = 0,
1036 			.window_start     = 0,
1037 			.window_len       = 0x100,
1038 			.range_min        = 0 * 0x100,
1039 			.range_max        = 5 * 0x100,
1040 		},
1041 	};
1042 
1043 	dev_dbg(&client->dev, "\n");
1044 
1045 	/* allocate memory for the internal state */
1046 	dev = kzalloc(sizeof(struct rtl2832_dev), GFP_KERNEL);
1047 	if (dev == NULL) {
1048 		ret = -ENOMEM;
1049 		goto err;
1050 	}
1051 
1052 	/* setup the state */
1053 	i2c_set_clientdata(client, dev);
1054 	dev->client = client;
1055 	dev->pdata = client->dev.platform_data;
1056 	dev->sleeping = true;
1057 	INIT_DELAYED_WORK(&dev->i2c_gate_work, rtl2832_i2c_gate_work);
1058 	/* create regmap */
1059 	dev->regmap_config.reg_bits =  8;
1060 	dev->regmap_config.val_bits =  8;
1061 	dev->regmap_config.volatile_reg = rtl2832_volatile_reg;
1062 	dev->regmap_config.max_register = 5 * 0x100;
1063 	dev->regmap_config.ranges = regmap_range_cfg;
1064 	dev->regmap_config.num_ranges = ARRAY_SIZE(regmap_range_cfg);
1065 	dev->regmap_config.cache_type = REGCACHE_NONE;
1066 	dev->regmap = regmap_init_i2c(client, &dev->regmap_config);
1067 	if (IS_ERR(dev->regmap)) {
1068 		ret = PTR_ERR(dev->regmap);
1069 		goto err_kfree;
1070 	}
1071 
1072 	/* check if the demod is there */
1073 	ret = regmap_bulk_read(dev->regmap, 0x000, &tmp, 1);
1074 	if (ret)
1075 		goto err_regmap_exit;
1076 
1077 	/* create muxed i2c adapter for demod tuner bus */
1078 	dev->muxc = i2c_mux_alloc(i2c, &i2c->dev, 1, 0, I2C_MUX_LOCKED,
1079 				  rtl2832_select, rtl2832_deselect);
1080 	if (!dev->muxc) {
1081 		ret = -ENOMEM;
1082 		goto err_regmap_exit;
1083 	}
1084 	dev->muxc->priv = dev;
1085 	ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
1086 	if (ret)
1087 		goto err_regmap_exit;
1088 
1089 	/* create dvb_frontend */
1090 	memcpy(&dev->fe.ops, &rtl2832_ops, sizeof(struct dvb_frontend_ops));
1091 	dev->fe.demodulator_priv = dev;
1092 
1093 	/* setup callbacks */
1094 	pdata->get_dvb_frontend = rtl2832_get_dvb_frontend;
1095 	pdata->get_i2c_adapter = rtl2832_get_i2c_adapter;
1096 	pdata->slave_ts_ctrl = rtl2832_slave_ts_ctrl;
1097 	pdata->pid_filter = rtl2832_pid_filter;
1098 	pdata->pid_filter_ctrl = rtl2832_pid_filter_ctrl;
1099 	pdata->regmap = dev->regmap;
1100 
1101 	dev_info(&client->dev, "Realtek RTL2832 successfully attached\n");
1102 	return 0;
1103 err_regmap_exit:
1104 	regmap_exit(dev->regmap);
1105 err_kfree:
1106 	kfree(dev);
1107 err:
1108 	dev_dbg(&client->dev, "failed=%d\n", ret);
1109 	return ret;
1110 }
1111 
1112 static void rtl2832_remove(struct i2c_client *client)
1113 {
1114 	struct rtl2832_dev *dev = i2c_get_clientdata(client);
1115 
1116 	dev_dbg(&client->dev, "\n");
1117 
1118 	cancel_delayed_work_sync(&dev->i2c_gate_work);
1119 
1120 	i2c_mux_del_adapters(dev->muxc);
1121 
1122 	regmap_exit(dev->regmap);
1123 
1124 	kfree(dev);
1125 }
1126 
1127 static const struct i2c_device_id rtl2832_id_table[] = {
1128 	{"rtl2832", 0},
1129 	{}
1130 };
1131 MODULE_DEVICE_TABLE(i2c, rtl2832_id_table);
1132 
1133 static struct i2c_driver rtl2832_driver = {
1134 	.driver = {
1135 		.name	= "rtl2832",
1136 		.suppress_bind_attrs	= true,
1137 	},
1138 	.probe_new	= rtl2832_probe,
1139 	.remove		= rtl2832_remove,
1140 	.id_table	= rtl2832_id_table,
1141 };
1142 
1143 module_i2c_driver(rtl2832_driver);
1144 
1145 MODULE_AUTHOR("Thomas Mair <mair.thomas86@gmail.com>");
1146 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
1147 MODULE_DESCRIPTION("Realtek RTL2832 DVB-T demodulator driver");
1148 MODULE_LICENSE("GPL");
1149