1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Support for OR51132 (pcHDTV HD-3000) - VSB/QAM 4 * 5 * Copyright (C) 2007 Trent Piepho <xyzzy@speakeasy.org> 6 * 7 * Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com> 8 * 9 * Based on code from Jack Kelliher (kelliher@xmission.com) 10 * Copyright (C) 2002 & pcHDTV, inc. 11 */ 12 13 /* 14 * This driver needs two external firmware files. Please copy 15 * "dvb-fe-or51132-vsb.fw" and "dvb-fe-or51132-qam.fw" to 16 * /usr/lib/hotplug/firmware/ or /lib/firmware/ 17 * (depending on configuration of firmware hotplug). 18 */ 19 #define OR51132_VSB_FIRMWARE "dvb-fe-or51132-vsb.fw" 20 #define OR51132_QAM_FIRMWARE "dvb-fe-or51132-qam.fw" 21 22 #include <linux/kernel.h> 23 #include <linux/module.h> 24 #include <linux/init.h> 25 #include <linux/delay.h> 26 #include <linux/string.h> 27 #include <linux/slab.h> 28 #include <asm/byteorder.h> 29 30 #include <media/dvb_math.h> 31 #include <media/dvb_frontend.h> 32 #include "or51132.h" 33 34 static int debug; 35 #define dprintk(args...) \ 36 do { \ 37 if (debug) printk(KERN_DEBUG "or51132: " args); \ 38 } while (0) 39 40 41 struct or51132_state 42 { 43 struct i2c_adapter* i2c; 44 45 /* Configuration settings */ 46 const struct or51132_config* config; 47 48 struct dvb_frontend frontend; 49 50 /* Demodulator private data */ 51 enum fe_modulation current_modulation; 52 u32 snr; /* Result of last SNR calculation */ 53 54 /* Tuner private data */ 55 u32 current_frequency; 56 }; 57 58 59 /* Write buffer to demod */ 60 static int or51132_writebuf(struct or51132_state *state, const u8 *buf, int len) 61 { 62 int err; 63 struct i2c_msg msg = { .addr = state->config->demod_address, 64 .flags = 0, .buf = (u8*)buf, .len = len }; 65 66 /* msleep(20); */ /* doesn't appear to be necessary */ 67 if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { 68 printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n", 69 msg.addr, msg.len, err); 70 return -EREMOTEIO; 71 } 72 return 0; 73 } 74 75 /* Write constant bytes, e.g. or51132_writebytes(state, 0x04, 0x42, 0x00); 76 Less code and more efficient that loading a buffer on the stack with 77 the bytes to send and then calling or51132_writebuf() on that. */ 78 #define or51132_writebytes(state, data...) \ 79 ({ static const u8 _data[] = {data}; \ 80 or51132_writebuf(state, _data, sizeof(_data)); }) 81 82 /* Read data from demod into buffer. Returns 0 on success. */ 83 static int or51132_readbuf(struct or51132_state *state, u8 *buf, int len) 84 { 85 int err; 86 struct i2c_msg msg = { .addr = state->config->demod_address, 87 .flags = I2C_M_RD, .buf = buf, .len = len }; 88 89 /* msleep(20); */ /* doesn't appear to be necessary */ 90 if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { 91 printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n", 92 msg.addr, msg.len, err); 93 return -EREMOTEIO; 94 } 95 return 0; 96 } 97 98 /* Reads a 16-bit demod register. Returns <0 on error. */ 99 static int or51132_readreg(struct or51132_state *state, u8 reg) 100 { 101 u8 buf[2] = { 0x04, reg }; 102 struct i2c_msg msg[2] = { 103 {.addr = state->config->demod_address, .flags = 0, 104 .buf = buf, .len = 2 }, 105 {.addr = state->config->demod_address, .flags = I2C_M_RD, 106 .buf = buf, .len = 2 }}; 107 int err; 108 109 if ((err = i2c_transfer(state->i2c, msg, 2)) != 2) { 110 printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n", 111 reg, err); 112 return -EREMOTEIO; 113 } 114 return buf[0] | (buf[1] << 8); 115 } 116 117 static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) 118 { 119 struct or51132_state* state = fe->demodulator_priv; 120 static const u8 run_buf[] = {0x7F,0x01}; 121 u8 rec_buf[8]; 122 u32 firmwareAsize, firmwareBsize; 123 int i,ret; 124 125 dprintk("Firmware is %zd bytes\n",fw->size); 126 127 /* Get size of firmware A and B */ 128 firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); 129 dprintk("FirmwareA is %i bytes\n",firmwareAsize); 130 firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); 131 dprintk("FirmwareB is %i bytes\n",firmwareBsize); 132 133 /* Upload firmware */ 134 if ((ret = or51132_writebuf(state, &fw->data[8], firmwareAsize))) { 135 printk(KERN_WARNING "or51132: load_firmware error 1\n"); 136 return ret; 137 } 138 if ((ret = or51132_writebuf(state, &fw->data[8+firmwareAsize], 139 firmwareBsize))) { 140 printk(KERN_WARNING "or51132: load_firmware error 2\n"); 141 return ret; 142 } 143 144 if ((ret = or51132_writebuf(state, run_buf, 2))) { 145 printk(KERN_WARNING "or51132: load_firmware error 3\n"); 146 return ret; 147 } 148 if ((ret = or51132_writebuf(state, run_buf, 2))) { 149 printk(KERN_WARNING "or51132: load_firmware error 4\n"); 150 return ret; 151 } 152 153 /* 50ms for operation to begin */ 154 msleep(50); 155 156 /* Read back ucode version to besure we loaded correctly and are really up and running */ 157 /* Get uCode version */ 158 if ((ret = or51132_writebytes(state, 0x10, 0x10, 0x00))) { 159 printk(KERN_WARNING "or51132: load_firmware error a\n"); 160 return ret; 161 } 162 if ((ret = or51132_writebytes(state, 0x04, 0x17))) { 163 printk(KERN_WARNING "or51132: load_firmware error b\n"); 164 return ret; 165 } 166 if ((ret = or51132_writebytes(state, 0x00, 0x00))) { 167 printk(KERN_WARNING "or51132: load_firmware error c\n"); 168 return ret; 169 } 170 for (i=0;i<4;i++) { 171 /* Once upon a time, this command might have had something 172 to do with getting the firmware version, but it's 173 not used anymore: 174 {0x04,0x00,0x30,0x00,i+1} */ 175 /* Read 8 bytes, two bytes at a time */ 176 if ((ret = or51132_readbuf(state, &rec_buf[i*2], 2))) { 177 printk(KERN_WARNING 178 "or51132: load_firmware error d - %d\n",i); 179 return ret; 180 } 181 } 182 183 printk(KERN_WARNING 184 "or51132: Version: %02X%02X%02X%02X-%02X%02X%02X%02X (%02X%01X-%01X-%02X%01X-%01X)\n", 185 rec_buf[1],rec_buf[0],rec_buf[3],rec_buf[2], 186 rec_buf[5],rec_buf[4],rec_buf[7],rec_buf[6], 187 rec_buf[3],rec_buf[2]>>4,rec_buf[2]&0x0f, 188 rec_buf[5],rec_buf[4]>>4,rec_buf[4]&0x0f); 189 190 if ((ret = or51132_writebytes(state, 0x10, 0x00, 0x00))) { 191 printk(KERN_WARNING "or51132: load_firmware error e\n"); 192 return ret; 193 } 194 return 0; 195 }; 196 197 static int or51132_init(struct dvb_frontend* fe) 198 { 199 return 0; 200 } 201 202 static int or51132_read_ber(struct dvb_frontend* fe, u32* ber) 203 { 204 *ber = 0; 205 return 0; 206 } 207 208 static int or51132_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) 209 { 210 *ucblocks = 0; 211 return 0; 212 } 213 214 static int or51132_sleep(struct dvb_frontend* fe) 215 { 216 return 0; 217 } 218 219 static int or51132_setmode(struct dvb_frontend* fe) 220 { 221 struct or51132_state* state = fe->demodulator_priv; 222 u8 cmd_buf1[3] = {0x04, 0x01, 0x5f}; 223 u8 cmd_buf2[3] = {0x1c, 0x00, 0 }; 224 225 dprintk("setmode %d\n",(int)state->current_modulation); 226 227 switch (state->current_modulation) { 228 case VSB_8: 229 /* Auto CH, Auto NTSC rej, MPEGser, MPEG2tr, phase noise-high */ 230 cmd_buf1[2] = 0x50; 231 /* REC MODE inv IF spectrum, Normal */ 232 cmd_buf2[1] = 0x03; 233 /* Channel MODE ATSC/VSB8 */ 234 cmd_buf2[2] = 0x06; 235 break; 236 /* All QAM modes are: 237 Auto-deinterleave; MPEGser, MPEG2tr, phase noise-high 238 REC MODE Normal Carrier Lock */ 239 case QAM_AUTO: 240 /* Channel MODE Auto QAM64/256 */ 241 cmd_buf2[2] = 0x4f; 242 break; 243 case QAM_256: 244 /* Channel MODE QAM256 */ 245 cmd_buf2[2] = 0x45; 246 break; 247 case QAM_64: 248 /* Channel MODE QAM64 */ 249 cmd_buf2[2] = 0x43; 250 break; 251 default: 252 printk(KERN_WARNING 253 "or51132: setmode: Modulation set to unsupported value (%d)\n", 254 state->current_modulation); 255 return -EINVAL; 256 } 257 258 /* Set Receiver 1 register */ 259 if (or51132_writebuf(state, cmd_buf1, 3)) { 260 printk(KERN_WARNING "or51132: set_mode error 1\n"); 261 return -EREMOTEIO; 262 } 263 dprintk("set #1 to %02x\n", cmd_buf1[2]); 264 265 /* Set operation mode in Receiver 6 register */ 266 if (or51132_writebuf(state, cmd_buf2, 3)) { 267 printk(KERN_WARNING "or51132: set_mode error 2\n"); 268 return -EREMOTEIO; 269 } 270 dprintk("set #6 to 0x%02x%02x\n", cmd_buf2[1], cmd_buf2[2]); 271 272 return 0; 273 } 274 275 /* Some modulations use the same firmware. This classifies modulations 276 by the firmware they use. */ 277 #define MOD_FWCLASS_UNKNOWN 0 278 #define MOD_FWCLASS_VSB 1 279 #define MOD_FWCLASS_QAM 2 280 static int modulation_fw_class(enum fe_modulation modulation) 281 { 282 switch(modulation) { 283 case VSB_8: 284 return MOD_FWCLASS_VSB; 285 case QAM_AUTO: 286 case QAM_64: 287 case QAM_256: 288 return MOD_FWCLASS_QAM; 289 default: 290 return MOD_FWCLASS_UNKNOWN; 291 } 292 } 293 294 static int or51132_set_parameters(struct dvb_frontend *fe) 295 { 296 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 297 int ret; 298 struct or51132_state* state = fe->demodulator_priv; 299 const struct firmware *fw; 300 const char *fwname; 301 int clock_mode; 302 303 /* Upload new firmware only if we need a different one */ 304 if (modulation_fw_class(state->current_modulation) != 305 modulation_fw_class(p->modulation)) { 306 switch (modulation_fw_class(p->modulation)) { 307 case MOD_FWCLASS_VSB: 308 dprintk("set_parameters VSB MODE\n"); 309 fwname = OR51132_VSB_FIRMWARE; 310 311 /* Set non-punctured clock for VSB */ 312 clock_mode = 0; 313 break; 314 case MOD_FWCLASS_QAM: 315 dprintk("set_parameters QAM MODE\n"); 316 fwname = OR51132_QAM_FIRMWARE; 317 318 /* Set punctured clock for QAM */ 319 clock_mode = 1; 320 break; 321 default: 322 printk("or51132: Modulation type(%d) UNSUPPORTED\n", 323 p->modulation); 324 return -1; 325 } 326 printk("or51132: Waiting for firmware upload(%s)...\n", 327 fwname); 328 ret = request_firmware(&fw, fwname, state->i2c->dev.parent); 329 if (ret) { 330 printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n"); 331 return ret; 332 } 333 ret = or51132_load_firmware(fe, fw); 334 release_firmware(fw); 335 if (ret) { 336 printk(KERN_WARNING "or51132: Writing firmware to device failed!\n"); 337 return ret; 338 } 339 printk("or51132: Firmware upload complete.\n"); 340 state->config->set_ts_params(fe, clock_mode); 341 } 342 /* Change only if we are actually changing the modulation */ 343 if (state->current_modulation != p->modulation) { 344 state->current_modulation = p->modulation; 345 or51132_setmode(fe); 346 } 347 348 if (fe->ops.tuner_ops.set_params) { 349 fe->ops.tuner_ops.set_params(fe); 350 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); 351 } 352 353 /* Set to current mode */ 354 or51132_setmode(fe); 355 356 /* Update current frequency */ 357 state->current_frequency = p->frequency; 358 return 0; 359 } 360 361 static int or51132_get_parameters(struct dvb_frontend* fe, 362 struct dtv_frontend_properties *p) 363 { 364 struct or51132_state* state = fe->demodulator_priv; 365 int status; 366 int retry = 1; 367 368 start: 369 /* Receiver Status */ 370 if ((status = or51132_readreg(state, 0x00)) < 0) { 371 printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n"); 372 return -EREMOTEIO; 373 } 374 switch(status&0xff) { 375 case 0x06: 376 p->modulation = VSB_8; 377 break; 378 case 0x43: 379 p->modulation = QAM_64; 380 break; 381 case 0x45: 382 p->modulation = QAM_256; 383 break; 384 default: 385 if (retry--) 386 goto start; 387 printk(KERN_WARNING "or51132: unknown status 0x%02x\n", 388 status&0xff); 389 return -EREMOTEIO; 390 } 391 392 /* FIXME: Read frequency from frontend, take AFC into account */ 393 p->frequency = state->current_frequency; 394 395 /* FIXME: How to read inversion setting? Receiver 6 register? */ 396 p->inversion = INVERSION_AUTO; 397 398 return 0; 399 } 400 401 static int or51132_read_status(struct dvb_frontend *fe, enum fe_status *status) 402 { 403 struct or51132_state* state = fe->demodulator_priv; 404 int reg; 405 406 /* Receiver Status */ 407 if ((reg = or51132_readreg(state, 0x00)) < 0) { 408 printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg); 409 *status = 0; 410 return -EREMOTEIO; 411 } 412 dprintk("%s: read_status %04x\n", __func__, reg); 413 414 if (reg & 0x0100) /* Receiver Lock */ 415 *status = FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI| 416 FE_HAS_SYNC|FE_HAS_LOCK; 417 else 418 *status = 0; 419 return 0; 420 } 421 422 /* Calculate SNR estimation (scaled by 2^24) 423 424 8-VSB SNR and QAM equations from Oren datasheets 425 426 For 8-VSB: 427 SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K 428 429 Where K = 0 if NTSC rejection filter is OFF; and 430 K = 3 if NTSC rejection filter is ON 431 432 For QAM64: 433 SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) 434 435 For QAM256: 436 SNR[dB] = 10 * log10(907832426.314266 / MSE^2 ) 437 438 We re-write the snr equation as: 439 SNR * 2^24 = 10*(c - 2*intlog10(MSE)) 440 Where for QAM256, c = log10(907832426.314266) * 2^24 441 and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */ 442 443 static u32 calculate_snr(u32 mse, u32 c) 444 { 445 if (mse == 0) /* No signal */ 446 return 0; 447 448 mse = 2*intlog10(mse); 449 if (mse > c) { 450 /* Negative SNR, which is possible, but realisticly the 451 demod will lose lock before the signal gets this bad. The 452 API only allows for unsigned values, so just return 0 */ 453 return 0; 454 } 455 return 10*(c - mse); 456 } 457 458 static int or51132_read_snr(struct dvb_frontend* fe, u16* snr) 459 { 460 struct or51132_state* state = fe->demodulator_priv; 461 int noise, reg; 462 u32 c, usK = 0; 463 int retry = 1; 464 465 start: 466 /* SNR after Equalizer */ 467 noise = or51132_readreg(state, 0x02); 468 if (noise < 0) { 469 printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n"); 470 return -EREMOTEIO; 471 } 472 dprintk("read_snr noise (%d)\n", noise); 473 474 /* Read status, contains modulation type for QAM_AUTO and 475 NTSC filter for VSB */ 476 reg = or51132_readreg(state, 0x00); 477 if (reg < 0) { 478 printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n"); 479 return -EREMOTEIO; 480 } 481 482 switch (reg&0xff) { 483 case 0x06: 484 if (reg & 0x1000) usK = 3 << 24; 485 fallthrough; 486 case 0x43: /* QAM64 */ 487 c = 150204167; 488 break; 489 case 0x45: 490 c = 150290396; 491 break; 492 default: 493 printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff); 494 if (retry--) goto start; 495 return -EREMOTEIO; 496 } 497 dprintk("%s: modulation %02x, NTSC rej O%s\n", __func__, 498 reg&0xff, reg&0x1000?"n":"ff"); 499 500 /* Calculate SNR using noise, c, and NTSC rejection correction */ 501 state->snr = calculate_snr(noise, c) - usK; 502 *snr = (state->snr) >> 16; 503 504 dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise, 505 state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16); 506 507 return 0; 508 } 509 510 static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) 511 { 512 /* Calculate Strength from SNR up to 35dB */ 513 /* Even though the SNR can go higher than 35dB, there is some comfort */ 514 /* factor in having a range of strong signals that can show at 100% */ 515 struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; 516 u16 snr; 517 int ret; 518 519 ret = fe->ops.read_snr(fe, &snr); 520 if (ret != 0) 521 return ret; 522 /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */ 523 /* scale the range 0 - 35*2^24 into 0 - 65535 */ 524 if (state->snr >= 8960 * 0x10000) 525 *strength = 0xffff; 526 else 527 *strength = state->snr / 8960; 528 529 return 0; 530 } 531 532 static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) 533 { 534 fe_tune_settings->min_delay_ms = 500; 535 fe_tune_settings->step_size = 0; 536 fe_tune_settings->max_drift = 0; 537 538 return 0; 539 } 540 541 static void or51132_release(struct dvb_frontend* fe) 542 { 543 struct or51132_state* state = fe->demodulator_priv; 544 kfree(state); 545 } 546 547 static const struct dvb_frontend_ops or51132_ops; 548 549 struct dvb_frontend* or51132_attach(const struct or51132_config* config, 550 struct i2c_adapter* i2c) 551 { 552 struct or51132_state* state = NULL; 553 554 /* Allocate memory for the internal state */ 555 state = kzalloc(sizeof(struct or51132_state), GFP_KERNEL); 556 if (state == NULL) 557 return NULL; 558 559 /* Setup the state */ 560 state->config = config; 561 state->i2c = i2c; 562 state->current_frequency = -1; 563 state->current_modulation = -1; 564 565 /* Create dvb_frontend */ 566 memcpy(&state->frontend.ops, &or51132_ops, sizeof(struct dvb_frontend_ops)); 567 state->frontend.demodulator_priv = state; 568 return &state->frontend; 569 } 570 571 static const struct dvb_frontend_ops or51132_ops = { 572 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, 573 .info = { 574 .name = "Oren OR51132 VSB/QAM Frontend", 575 .frequency_min_hz = 44 * MHz, 576 .frequency_max_hz = 958 * MHz, 577 .frequency_stepsize_hz = 166666, 578 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | 579 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | 580 FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | 581 FE_CAN_8VSB 582 }, 583 584 .release = or51132_release, 585 586 .init = or51132_init, 587 .sleep = or51132_sleep, 588 589 .set_frontend = or51132_set_parameters, 590 .get_frontend = or51132_get_parameters, 591 .get_tune_settings = or51132_get_tune_settings, 592 593 .read_status = or51132_read_status, 594 .read_ber = or51132_read_ber, 595 .read_signal_strength = or51132_read_signal_strength, 596 .read_snr = or51132_read_snr, 597 .read_ucblocks = or51132_read_ucblocks, 598 }; 599 600 module_param(debug, int, 0644); 601 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); 602 603 MODULE_DESCRIPTION("OR51132 ATSC [pcHDTV HD-3000] (8VSB & ITU J83 AnnexB FEC QAM64/256) Demodulator Driver"); 604 MODULE_AUTHOR("Kirk Lapray"); 605 MODULE_AUTHOR("Trent Piepho"); 606 MODULE_LICENSE("GPL"); 607 608 EXPORT_SYMBOL(or51132_attach); 609