1 // SPDX-License-Identifier: GPL-2.0
2 //
3 // Driver for LNB supply and control IC STMicroelectronics LNBH29
4 //
5 // Copyright (c) 2018 Socionext Inc.
6 
7 #include <linux/module.h>
8 #include <linux/init.h>
9 #include <linux/slab.h>
10 
11 #include <media/dvb_frontend.h>
12 #include "lnbh29.h"
13 
14 /**
15  * struct lnbh29_priv - LNBH29 driver private data
16  * @i2c:         Pointer to the I2C adapter structure
17  * @i2c_address: I2C address of LNBH29 chip
18  * @config:      Registers configuration
19  *               offset 0: 1st register address, always 0x01 (DATA)
20  *               offset 1: DATA register value
21  */
22 struct lnbh29_priv {
23 	struct i2c_adapter *i2c;
24 	u8 i2c_address;
25 	u8 config[2];
26 };
27 
28 #define LNBH29_STATUS_OLF     BIT(0)
29 #define LNBH29_STATUS_OTF     BIT(1)
30 #define LNBH29_STATUS_VMON    BIT(2)
31 #define LNBH29_STATUS_PNG     BIT(3)
32 #define LNBH29_STATUS_PDO     BIT(4)
33 #define LNBH29_VSEL_MASK      GENMASK(2, 0)
34 #define LNBH29_VSEL_0         0x00
35 /* Min: 13.188V, Typ: 13.667V, Max:14V */
36 #define LNBH29_VSEL_13        0x03
37 /* Min: 18.158V, Typ: 18.817V, Max:19.475V */
38 #define LNBH29_VSEL_18        0x07
39 
40 static int lnbh29_read_vmon(struct lnbh29_priv *priv)
41 {
42 	u8 addr = 0x00;
43 	u8 status[2];
44 	int ret;
45 	struct i2c_msg msg[2] = {
46 		{
47 			.addr = priv->i2c_address,
48 			.flags = 0,
49 			.len = 1,
50 			.buf = &addr
51 		}, {
52 			.addr = priv->i2c_address,
53 			.flags = I2C_M_RD,
54 			.len = sizeof(status),
55 			.buf = status
56 		}
57 	};
58 
59 	ret = i2c_transfer(priv->i2c, msg, 2);
60 	if (ret >= 0 && ret != 2)
61 		ret = -EIO;
62 	if (ret < 0) {
63 		dev_dbg(&priv->i2c->dev, "LNBH29 I2C transfer failed (%d)\n",
64 			ret);
65 		return ret;
66 	}
67 
68 	if (status[0] & (LNBH29_STATUS_OLF | LNBH29_STATUS_VMON)) {
69 		dev_err(&priv->i2c->dev,
70 			"LNBH29 voltage in failure state, status reg 0x%x\n",
71 			status[0]);
72 		return -EIO;
73 	}
74 
75 	return 0;
76 }
77 
78 static int lnbh29_set_voltage(struct dvb_frontend *fe,
79 			      enum fe_sec_voltage voltage)
80 {
81 	struct lnbh29_priv *priv = fe->sec_priv;
82 	u8 data_reg;
83 	int ret;
84 	struct i2c_msg msg = {
85 		.addr = priv->i2c_address,
86 		.flags = 0,
87 		.len = sizeof(priv->config),
88 		.buf = priv->config
89 	};
90 
91 	switch (voltage) {
92 	case SEC_VOLTAGE_OFF:
93 		data_reg = LNBH29_VSEL_0;
94 		break;
95 	case SEC_VOLTAGE_13:
96 		data_reg = LNBH29_VSEL_13;
97 		break;
98 	case SEC_VOLTAGE_18:
99 		data_reg = LNBH29_VSEL_18;
100 		break;
101 	default:
102 		return -EINVAL;
103 	}
104 	priv->config[1] &= ~LNBH29_VSEL_MASK;
105 	priv->config[1] |= data_reg;
106 
107 	ret = i2c_transfer(priv->i2c, &msg, 1);
108 	if (ret >= 0 && ret != 1)
109 		ret = -EIO;
110 	if (ret < 0) {
111 		dev_err(&priv->i2c->dev, "LNBH29 I2C transfer error (%d)\n",
112 			ret);
113 		return ret;
114 	}
115 
116 	/* Soft-start time (Vout 0V to 18V) is Typ. 6ms. */
117 	usleep_range(6000, 20000);
118 
119 	if (voltage == SEC_VOLTAGE_OFF)
120 		return 0;
121 
122 	return lnbh29_read_vmon(priv);
123 }
124 
125 static void lnbh29_release(struct dvb_frontend *fe)
126 {
127 	lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF);
128 	kfree(fe->sec_priv);
129 	fe->sec_priv = NULL;
130 }
131 
132 struct dvb_frontend *lnbh29_attach(struct dvb_frontend *fe,
133 				   struct lnbh29_config *cfg,
134 				   struct i2c_adapter *i2c)
135 {
136 	struct lnbh29_priv *priv;
137 
138 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
139 	if (!priv)
140 		return NULL;
141 
142 	priv->i2c_address = (cfg->i2c_address >> 1);
143 	priv->i2c = i2c;
144 	priv->config[0] = 0x01;
145 	priv->config[1] = cfg->data_config;
146 	fe->sec_priv = priv;
147 
148 	if (lnbh29_set_voltage(fe, SEC_VOLTAGE_OFF)) {
149 		dev_err(&i2c->dev, "no LNBH29 found at I2C addr 0x%02x\n",
150 			priv->i2c_address);
151 		kfree(priv);
152 		fe->sec_priv = NULL;
153 		return NULL;
154 	}
155 
156 	fe->ops.release_sec = lnbh29_release;
157 	fe->ops.set_voltage = lnbh29_set_voltage;
158 
159 	dev_info(&i2c->dev, "LNBH29 attached at I2C addr 0x%02x\n",
160 		 priv->i2c_address);
161 
162 	return fe;
163 }
164 EXPORT_SYMBOL(lnbh29_attach);
165 
166 MODULE_AUTHOR("Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>");
167 MODULE_DESCRIPTION("STMicroelectronics LNBH29 driver");
168 MODULE_LICENSE("GPL v2");
169