1 /**
2  * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
3  *
4  * Copyright (C) 2010 Malcolm Priestley
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License Version 2, as
8  * published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  */
16 
17 #include <linux/module.h>
18 #include <linux/dvb/frontend.h>
19 #include <linux/slab.h>
20 #include <linux/types.h>
21 
22 #include "ix2505v.h"
23 
24 static int ix2505v_debug;
25 #define dprintk(level, args...) do { \
26 	if (ix2505v_debug & level) \
27 		printk(KERN_DEBUG "ix2505v: " args); \
28 } while (0)
29 
30 #define deb_info(args...)  dprintk(0x01, args)
31 #define deb_i2c(args...)  dprintk(0x02, args)
32 
33 struct ix2505v_state {
34 	struct i2c_adapter *i2c;
35 	const struct ix2505v_config *config;
36 	u32 frequency;
37 };
38 
39 /**
40  *  Data read format of the Sharp IX2505V B0017
41  *
42  *  byte1:   1   |   1   |   0   |   0   |   0   |  MA1  |  MA0  |  1
43  *  byte2:  POR  |   FL  |  RD2  |  RD1  |  RD0  |   X   |   X   |  X
44  *
45  *  byte1 = address
46  *  byte2;
47  *	POR = Power on Reset (VCC H=<2.2v L=>2.2v)
48  *	FL  = Phase Lock (H=lock L=unlock)
49  *	RD0-2 = Reserved internal operations
50  *
51  * Only POR can be used to check the tuner is present
52  *
53  * Caution: after byte2 the I2C reverts to write mode continuing to read
54  *          may corrupt tuning data.
55  *
56  */
57 
58 static int ix2505v_read_status_reg(struct ix2505v_state *state)
59 {
60 	u8 addr = state->config->tuner_address;
61 	u8 b2[] = {0};
62 	int ret;
63 
64 	struct i2c_msg msg[1] = {
65 		{ .addr = addr, .flags = I2C_M_RD, .buf = b2, .len = 1 }
66 	};
67 
68 	ret = i2c_transfer(state->i2c, msg, 1);
69 	deb_i2c("Read %s ", __func__);
70 
71 	return (ret == 1) ? (int) b2[0] : -1;
72 }
73 
74 static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count)
75 {
76 	struct i2c_msg msg[1] = {
77 		{ .addr = state->config->tuner_address, .flags = 0,
78 		  .buf = buf, .len = count },
79 	};
80 
81 	int ret;
82 
83 	ret = i2c_transfer(state->i2c, msg, 1);
84 
85 	if (ret != 1) {
86 		deb_i2c("%s: i2c error, ret=%d\n", __func__, ret);
87 		return -EIO;
88 	}
89 
90 	return 0;
91 }
92 
93 static void ix2505v_release(struct dvb_frontend *fe)
94 {
95 	struct ix2505v_state *state = fe->tuner_priv;
96 
97 	fe->tuner_priv = NULL;
98 	kfree(state);
99 
100 }
101 
102 /**
103  *  Data write format of the Sharp IX2505V B0017
104  *
105  *  byte1:   1   |   1   |   0   |   0   |   0   | 0(MA1)| 0(MA0)|  0
106  *  byte2:   0   |  BG1  |  BG2  |   N8  |   N7  |   N6  |  N5   |  N4
107  *  byte3:   N3  |   N2  |   N1  |   A5  |   A4  |   A3  |   A2  |  A1
108  *  byte4:   1   | 1(C1) | 1(C0) |  PD5  |  PD4  |   TM  | 0(RTS)| 1(REF)
109  *  byte5:   BA2 |   BA1 |  BA0  |  PSC  |  PD3  |PD2/TS2|DIV/TS1|PD0/TS0
110  *
111  *  byte1 = address
112  *
113  *  Write order
114  *  1) byte1 -> byte2 -> byte3 -> byte4 -> byte5
115  *  2) byte1 -> byte4 -> byte5 -> byte2 -> byte3
116  *  3) byte1 -> byte2 -> byte3 -> byte4
117  *  4) byte1 -> byte4 -> byte5 -> byte2
118  *  5) byte1 -> byte2 -> byte3
119  *  6) byte1 -> byte4 -> byte5
120  *  7) byte1 -> byte2
121  *  8) byte1 -> byte4
122  *
123  *  Recommended Setup
124  *  1 -> 8 -> 6
125  */
126 
127 static int ix2505v_set_params(struct dvb_frontend *fe)
128 {
129 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
130 	struct ix2505v_state *state = fe->tuner_priv;
131 	u32 frequency = c->frequency;
132 	u32 b_w  = (c->symbol_rate * 27) / 32000;
133 	u32 div_factor, N , A, x;
134 	int ret = 0, len;
135 	u8 gain, cc, ref, psc, local_osc, lpf;
136 	u8 data[4] = {0};
137 
138 	if ((frequency < fe->ops.info.frequency_min)
139 	||  (frequency > fe->ops.info.frequency_max))
140 		return -EINVAL;
141 
142 	if (state->config->tuner_gain)
143 		gain = (state->config->tuner_gain < 4)
144 			? state->config->tuner_gain : 0;
145 	else
146 		gain = 0x0;
147 
148 	if (state->config->tuner_chargepump)
149 		cc = state->config->tuner_chargepump;
150 	else
151 		cc = 0x3;
152 
153 	ref = 8; /* REF =1 */
154 	psc = 32; /* PSC = 0 */
155 
156 	div_factor = (frequency * ref) / 40; /* local osc = 4Mhz */
157 	x = div_factor / psc;
158 	N = x/100;
159 	A = ((x - (N * 100)) * psc) / 100;
160 
161 	data[0] = ((gain & 0x3) << 5) | (N >> 3);
162 	data[1] = (N << 5) | (A & 0x1f);
163 	data[2] = 0x81 | ((cc & 0x3) << 5) ; /*PD5,PD4 & TM = 0|C1,C0|REF=1*/
164 
165 	deb_info("Frq=%d x=%d N=%d A=%d\n", frequency, x, N, A);
166 
167 	if (frequency <= 1065000)
168 		local_osc = (6 << 5) | 2;
169 	else if (frequency <= 1170000)
170 		local_osc = (7 << 5) | 2;
171 	else if (frequency <= 1300000)
172 		local_osc = (1 << 5);
173 	else if (frequency <= 1445000)
174 		local_osc = (2 << 5);
175 	else if (frequency <= 1607000)
176 		local_osc = (3 << 5);
177 	else if (frequency <= 1778000)
178 		local_osc = (4 << 5);
179 	else if (frequency <= 1942000)
180 		local_osc = (5 << 5);
181 	else		/*frequency up to 2150000*/
182 		local_osc = (6 << 5);
183 
184 	data[3] = local_osc; /* all other bits set 0 */
185 
186 	if (b_w <= 10000)
187 		lpf = 0xc;
188 	else if (b_w <= 12000)
189 		lpf = 0x2;
190 	else if (b_w <= 14000)
191 		lpf = 0xa;
192 	else if (b_w <= 16000)
193 		lpf = 0x6;
194 	else if (b_w <= 18000)
195 		lpf = 0xe;
196 	else if (b_w <= 20000)
197 		lpf = 0x1;
198 	else if (b_w <= 22000)
199 		lpf = 0x9;
200 	else if (b_w <= 24000)
201 		lpf = 0x5;
202 	else if (b_w <= 26000)
203 		lpf = 0xd;
204 	else if (b_w <= 28000)
205 		lpf = 0x3;
206 		else
207 		lpf = 0xb;
208 
209 	deb_info("Osc=%x b_w=%x lpf=%x\n", local_osc, b_w, lpf);
210 	deb_info("Data 0=[%4phN]\n", data);
211 
212 	if (fe->ops.i2c_gate_ctrl)
213 		fe->ops.i2c_gate_ctrl(fe, 1);
214 
215 	len = sizeof(data);
216 	ret |= ix2505v_write(state, data, len);
217 
218 	data[2] |= 0x4; /* set TM = 1 other bits same */
219 
220 	if (fe->ops.i2c_gate_ctrl)
221 		fe->ops.i2c_gate_ctrl(fe, 1);
222 
223 	len = 1;
224 	ret |= ix2505v_write(state, &data[2], len); /* write byte 4 only */
225 
226 	msleep(10);
227 
228 	data[2] |= ((lpf >> 2) & 0x3) << 3; /* lpf */
229 	data[3] |= (lpf & 0x3) << 2;
230 
231 	deb_info("Data 2=[%x%x]\n", data[2], data[3]);
232 
233 	if (fe->ops.i2c_gate_ctrl)
234 		fe->ops.i2c_gate_ctrl(fe, 1);
235 
236 	len = 2;
237 	ret |= ix2505v_write(state, &data[2], len); /* write byte 4 & 5 */
238 
239 	if (state->config->min_delay_ms)
240 		msleep(state->config->min_delay_ms);
241 
242 	state->frequency = frequency;
243 
244 	return ret;
245 }
246 
247 static int ix2505v_get_frequency(struct dvb_frontend *fe, u32 *frequency)
248 {
249 	struct ix2505v_state *state = fe->tuner_priv;
250 
251 	*frequency = state->frequency;
252 
253 	return 0;
254 }
255 
256 static const struct dvb_tuner_ops ix2505v_tuner_ops = {
257 	.info = {
258 		.name = "Sharp IX2505V (B0017)",
259 		.frequency_min = 950000,
260 		.frequency_max = 2175000
261 	},
262 	.release = ix2505v_release,
263 	.set_params = ix2505v_set_params,
264 	.get_frequency = ix2505v_get_frequency,
265 };
266 
267 struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
268 				    const struct ix2505v_config *config,
269 				    struct i2c_adapter *i2c)
270 {
271 	struct ix2505v_state *state = NULL;
272 	int ret;
273 
274 	if (NULL == config) {
275 		deb_i2c("%s: no config ", __func__);
276 		goto error;
277 	}
278 
279 	state = kzalloc(sizeof(struct ix2505v_state), GFP_KERNEL);
280 	if (NULL == state)
281 		return NULL;
282 
283 	state->config = config;
284 	state->i2c = i2c;
285 
286 	if (state->config->tuner_write_only) {
287 		if (fe->ops.i2c_gate_ctrl)
288 			fe->ops.i2c_gate_ctrl(fe, 1);
289 
290 		ret = ix2505v_read_status_reg(state);
291 
292 		if (ret & 0x80) {
293 			deb_i2c("%s: No IX2505V found\n", __func__);
294 			goto error;
295 		}
296 
297 		if (fe->ops.i2c_gate_ctrl)
298 			fe->ops.i2c_gate_ctrl(fe, 0);
299 	}
300 
301 	fe->tuner_priv = state;
302 
303 	memcpy(&fe->ops.tuner_ops, &ix2505v_tuner_ops,
304 		sizeof(struct dvb_tuner_ops));
305 	deb_i2c("%s: initialization (%s addr=0x%02x) ok\n",
306 		__func__, fe->ops.tuner_ops.info.name, config->tuner_address);
307 
308 	return fe;
309 
310 error:
311 	kfree(state);
312 	return NULL;
313 }
314 EXPORT_SYMBOL(ix2505v_attach);
315 
316 module_param_named(debug, ix2505v_debug, int, 0644);
317 MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
318 MODULE_DESCRIPTION("DVB IX2505V tuner driver");
319 MODULE_AUTHOR("Malcolm Priestley");
320 MODULE_LICENSE("GPL");
321