1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _DRXK_H_ 3 #define _DRXK_H_ 4 5 #include <linux/types.h> 6 #include <linux/i2c.h> 7 8 /** 9 * struct drxk_config - Configure the initial parameters for DRX-K 10 * 11 * @adr: I2C address of the DRX-K 12 * @parallel_ts: True means that the device uses parallel TS, 13 * Serial otherwise. 14 * @dynamic_clk: True means that the clock will be dynamically 15 * adjusted. Static clock otherwise. 16 * @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG. 17 * @single_master: Device is on the single master mode 18 * @no_i2c_bridge: Don't switch the I2C bridge to talk with tuner 19 * @antenna_gpio: GPIO bit used to control the antenna 20 * @antenna_dvbt: GPIO bit for changing antenna to DVB-C. A value of 1 21 * means that 1=DVBC, 0 = DVBT. Zero means the opposite. 22 * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength. 23 * @chunk_size: maximum size for I2C messages 24 * @microcode_name: Name of the firmware file with the microcode 25 * @qam_demod_parameter_count: The number of parameters used for the command 26 * to set the demodulator parameters. All 27 * firmwares are using the 2-parameter commmand. 28 * An exception is the ``drxk_a3.mc`` firmware, 29 * which uses the 4-parameter command. 30 * A value of 0 (default) or lower indicates that 31 * the correct number of parameters will be 32 * automatically detected. 33 * 34 * On the ``*_gpio`` vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is 35 * UIO-3. 36 */ 37 struct drxk_config { 38 u8 adr; 39 bool single_master; 40 bool no_i2c_bridge; 41 bool parallel_ts; 42 bool dynamic_clk; 43 bool enable_merr_cfg; 44 45 bool antenna_dvbt; 46 u16 antenna_gpio; 47 48 u8 mpeg_out_clk_strength; 49 int chunk_size; 50 51 const char *microcode_name; 52 int qam_demod_parameter_count; 53 }; 54 55 #if IS_REACHABLE(CONFIG_DVB_DRXK) 56 /** 57 * Attach a drxk demod 58 * 59 * @config: pointer to &struct drxk_config with demod configuration. 60 * @i2c: i2c adapter to use. 61 * 62 * return: FE pointer on success, NULL on failure. 63 */ 64 extern struct dvb_frontend *drxk_attach(const struct drxk_config *config, 65 struct i2c_adapter *i2c); 66 #else 67 static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config, 68 struct i2c_adapter *i2c) 69 { 70 printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); 71 return NULL; 72 } 73 #endif 74 75 #endif 76