1 /* 2 Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc. 3 All rights reserved. 4 5 Redistribution and use in source and binary forms, with or without 6 modification, are permitted provided that the following conditions are met: 7 8 * Redistributions of source code must retain the above copyright notice, 9 this list of conditions and the following disclaimer. 10 * Redistributions in binary form must reproduce the above copyright notice, 11 this list of conditions and the following disclaimer in the documentation 12 and/or other materials provided with the distribution. 13 * Neither the name of Trident Microsystems nor Hauppauge Computer Works 14 nor the names of its contributors may be used to endorse or promote 15 products derived from this software without specific prior written 16 permission. 17 18 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 POSSIBILITY OF SUCH DAMAGE. 29 30 DRXJ specific implementation of DRX driver 31 authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen 32 33 The Linux DVB Driver for Micronas DRX39xx family (drx3933j) was 34 written by Devin Heitmueller <devin.heitmueller@kernellabs.com> 35 36 This program is free software; you can redistribute it and/or modify 37 it under the terms of the GNU General Public License as published by 38 the Free Software Foundation; either version 2 of the License, or 39 (at your option) any later version. 40 41 This program is distributed in the hope that it will be useful, 42 but WITHOUT ANY WARRANTY; without even the implied warranty of 43 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 44 45 GNU General Public License for more details. 46 47 You should have received a copy of the GNU General Public License 48 along with this program; if not, write to the Free Software 49 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 50 */ 51 52 /*----------------------------------------------------------------------------- 53 INCLUDE FILES 54 ----------------------------------------------------------------------------*/ 55 56 #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ 57 58 #include <linux/module.h> 59 #include <linux/init.h> 60 #include <linux/string.h> 61 #include <linux/slab.h> 62 #include <asm/div64.h> 63 64 #include <media/dvb_frontend.h> 65 #include "drx39xxj.h" 66 67 #include "drxj.h" 68 #include "drxj_map.h" 69 70 /*============================================================================*/ 71 /*=== DEFINES ================================================================*/ 72 /*============================================================================*/ 73 74 #define DRX39XX_MAIN_FIRMWARE "dvb-fe-drxj-mc-1.0.8.fw" 75 76 /* 77 * \brief Maximum u32 value. 78 */ 79 #ifndef MAX_U32 80 #define MAX_U32 ((u32) (0xFFFFFFFFL)) 81 #endif 82 83 /* Customer configurable hardware settings, etc */ 84 #ifndef MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH 85 #define MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH 0x02 86 #endif 87 88 #ifndef MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH 89 #define MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH 0x02 90 #endif 91 92 #ifndef MPEG_OUTPUT_CLK_DRIVE_STRENGTH 93 #define MPEG_OUTPUT_CLK_DRIVE_STRENGTH 0x06 94 #endif 95 96 #ifndef OOB_CRX_DRIVE_STRENGTH 97 #define OOB_CRX_DRIVE_STRENGTH 0x02 98 #endif 99 100 #ifndef OOB_DRX_DRIVE_STRENGTH 101 #define OOB_DRX_DRIVE_STRENGTH 0x02 102 #endif 103 /*** START DJCOMBO patches to DRXJ registermap constants *********************/ 104 /*** registermap 200706071303 from drxj **************************************/ 105 #define ATV_TOP_CR_AMP_TH_FM 0x0 106 #define ATV_TOP_CR_AMP_TH_L 0xA 107 #define ATV_TOP_CR_AMP_TH_LP 0xA 108 #define ATV_TOP_CR_AMP_TH_BG 0x8 109 #define ATV_TOP_CR_AMP_TH_DK 0x8 110 #define ATV_TOP_CR_AMP_TH_I 0x8 111 #define ATV_TOP_CR_CONT_CR_D_MN 0x18 112 #define ATV_TOP_CR_CONT_CR_D_FM 0x0 113 #define ATV_TOP_CR_CONT_CR_D_L 0x20 114 #define ATV_TOP_CR_CONT_CR_D_LP 0x20 115 #define ATV_TOP_CR_CONT_CR_D_BG 0x18 116 #define ATV_TOP_CR_CONT_CR_D_DK 0x18 117 #define ATV_TOP_CR_CONT_CR_D_I 0x18 118 #define ATV_TOP_CR_CONT_CR_I_MN 0x80 119 #define ATV_TOP_CR_CONT_CR_I_FM 0x0 120 #define ATV_TOP_CR_CONT_CR_I_L 0x80 121 #define ATV_TOP_CR_CONT_CR_I_LP 0x80 122 #define ATV_TOP_CR_CONT_CR_I_BG 0x80 123 #define ATV_TOP_CR_CONT_CR_I_DK 0x80 124 #define ATV_TOP_CR_CONT_CR_I_I 0x80 125 #define ATV_TOP_CR_CONT_CR_P_MN 0x4 126 #define ATV_TOP_CR_CONT_CR_P_FM 0x0 127 #define ATV_TOP_CR_CONT_CR_P_L 0x4 128 #define ATV_TOP_CR_CONT_CR_P_LP 0x4 129 #define ATV_TOP_CR_CONT_CR_P_BG 0x4 130 #define ATV_TOP_CR_CONT_CR_P_DK 0x4 131 #define ATV_TOP_CR_CONT_CR_P_I 0x4 132 #define ATV_TOP_CR_OVM_TH_MN 0xA0 133 #define ATV_TOP_CR_OVM_TH_FM 0x0 134 #define ATV_TOP_CR_OVM_TH_L 0xA0 135 #define ATV_TOP_CR_OVM_TH_LP 0xA0 136 #define ATV_TOP_CR_OVM_TH_BG 0xA0 137 #define ATV_TOP_CR_OVM_TH_DK 0xA0 138 #define ATV_TOP_CR_OVM_TH_I 0xA0 139 #define ATV_TOP_EQU0_EQU_C0_FM 0x0 140 #define ATV_TOP_EQU0_EQU_C0_L 0x3 141 #define ATV_TOP_EQU0_EQU_C0_LP 0x3 142 #define ATV_TOP_EQU0_EQU_C0_BG 0x7 143 #define ATV_TOP_EQU0_EQU_C0_DK 0x0 144 #define ATV_TOP_EQU0_EQU_C0_I 0x3 145 #define ATV_TOP_EQU1_EQU_C1_FM 0x0 146 #define ATV_TOP_EQU1_EQU_C1_L 0x1F6 147 #define ATV_TOP_EQU1_EQU_C1_LP 0x1F6 148 #define ATV_TOP_EQU1_EQU_C1_BG 0x197 149 #define ATV_TOP_EQU1_EQU_C1_DK 0x198 150 #define ATV_TOP_EQU1_EQU_C1_I 0x1F6 151 #define ATV_TOP_EQU2_EQU_C2_FM 0x0 152 #define ATV_TOP_EQU2_EQU_C2_L 0x28 153 #define ATV_TOP_EQU2_EQU_C2_LP 0x28 154 #define ATV_TOP_EQU2_EQU_C2_BG 0xC5 155 #define ATV_TOP_EQU2_EQU_C2_DK 0xB0 156 #define ATV_TOP_EQU2_EQU_C2_I 0x28 157 #define ATV_TOP_EQU3_EQU_C3_FM 0x0 158 #define ATV_TOP_EQU3_EQU_C3_L 0x192 159 #define ATV_TOP_EQU3_EQU_C3_LP 0x192 160 #define ATV_TOP_EQU3_EQU_C3_BG 0x12E 161 #define ATV_TOP_EQU3_EQU_C3_DK 0x18E 162 #define ATV_TOP_EQU3_EQU_C3_I 0x192 163 #define ATV_TOP_STD_MODE_MN 0x0 164 #define ATV_TOP_STD_MODE_FM 0x1 165 #define ATV_TOP_STD_MODE_L 0x0 166 #define ATV_TOP_STD_MODE_LP 0x0 167 #define ATV_TOP_STD_MODE_BG 0x0 168 #define ATV_TOP_STD_MODE_DK 0x0 169 #define ATV_TOP_STD_MODE_I 0x0 170 #define ATV_TOP_STD_VID_POL_MN 0x0 171 #define ATV_TOP_STD_VID_POL_FM 0x0 172 #define ATV_TOP_STD_VID_POL_L 0x2 173 #define ATV_TOP_STD_VID_POL_LP 0x2 174 #define ATV_TOP_STD_VID_POL_BG 0x0 175 #define ATV_TOP_STD_VID_POL_DK 0x0 176 #define ATV_TOP_STD_VID_POL_I 0x0 177 #define ATV_TOP_VID_AMP_MN 0x380 178 #define ATV_TOP_VID_AMP_FM 0x0 179 #define ATV_TOP_VID_AMP_L 0xF50 180 #define ATV_TOP_VID_AMP_LP 0xF50 181 #define ATV_TOP_VID_AMP_BG 0x380 182 #define ATV_TOP_VID_AMP_DK 0x394 183 #define ATV_TOP_VID_AMP_I 0x3D8 184 #define IQM_CF_OUT_ENA_OFDM__M 0x4 185 #define IQM_FS_ADJ_SEL_B_QAM 0x1 186 #define IQM_FS_ADJ_SEL_B_OFF 0x0 187 #define IQM_FS_ADJ_SEL_B_VSB 0x2 188 #define IQM_RC_ADJ_SEL_B_OFF 0x0 189 #define IQM_RC_ADJ_SEL_B_QAM 0x1 190 #define IQM_RC_ADJ_SEL_B_VSB 0x2 191 /*** END DJCOMBO patches to DRXJ registermap *********************************/ 192 193 #include "drx_driver_version.h" 194 195 /* #define DRX_DEBUG */ 196 #ifdef DRX_DEBUG 197 #include <stdio.h> 198 #endif 199 200 /*----------------------------------------------------------------------------- 201 ENUMS 202 ----------------------------------------------------------------------------*/ 203 204 /*----------------------------------------------------------------------------- 205 DEFINES 206 ----------------------------------------------------------------------------*/ 207 #ifndef DRXJ_WAKE_UP_KEY 208 #define DRXJ_WAKE_UP_KEY (demod->my_i2c_dev_addr->i2c_addr) 209 #endif 210 211 /* 212 * \def DRXJ_DEF_I2C_ADDR 213 * \brief Default I2C address of a demodulator instance. 214 */ 215 #define DRXJ_DEF_I2C_ADDR (0x52) 216 217 /* 218 * \def DRXJ_DEF_DEMOD_DEV_ID 219 * \brief Default device identifier of a demodultor instance. 220 */ 221 #define DRXJ_DEF_DEMOD_DEV_ID (1) 222 223 /* 224 * \def DRXJ_SCAN_TIMEOUT 225 * \brief Timeout value for waiting on demod lock during channel scan (millisec). 226 */ 227 #define DRXJ_SCAN_TIMEOUT 1000 228 229 /* 230 * \def HI_I2C_DELAY 231 * \brief HI timing delay for I2C timing (in nano seconds) 232 * 233 * Used to compute HI_CFG_DIV 234 */ 235 #define HI_I2C_DELAY 42 236 237 /* 238 * \def HI_I2C_BRIDGE_DELAY 239 * \brief HI timing delay for I2C timing (in nano seconds) 240 * 241 * Used to compute HI_CFG_BDL 242 */ 243 #define HI_I2C_BRIDGE_DELAY 750 244 245 /* 246 * \brief Time Window for MER and SER Measurement in Units of Segment duration. 247 */ 248 #define VSB_TOP_MEASUREMENT_PERIOD 64 249 #define SYMBOLS_PER_SEGMENT 832 250 251 /* 252 * \brief bit rate and segment rate constants used for SER and BER. 253 */ 254 /* values taken from the QAM microcode */ 255 #define DRXJ_QAM_SL_SIG_POWER_QAM_UNKNOWN 0 256 #define DRXJ_QAM_SL_SIG_POWER_QPSK 32768 257 #define DRXJ_QAM_SL_SIG_POWER_QAM8 24576 258 #define DRXJ_QAM_SL_SIG_POWER_QAM16 40960 259 #define DRXJ_QAM_SL_SIG_POWER_QAM32 20480 260 #define DRXJ_QAM_SL_SIG_POWER_QAM64 43008 261 #define DRXJ_QAM_SL_SIG_POWER_QAM128 20992 262 #define DRXJ_QAM_SL_SIG_POWER_QAM256 43520 263 /* 264 * \brief Min supported symbolrates. 265 */ 266 #ifndef DRXJ_QAM_SYMBOLRATE_MIN 267 #define DRXJ_QAM_SYMBOLRATE_MIN (520000) 268 #endif 269 270 /* 271 * \brief Max supported symbolrates. 272 */ 273 #ifndef DRXJ_QAM_SYMBOLRATE_MAX 274 #define DRXJ_QAM_SYMBOLRATE_MAX (7233000) 275 #endif 276 277 /* 278 * \def DRXJ_QAM_MAX_WAITTIME 279 * \brief Maximal wait time for QAM auto constellation in ms 280 */ 281 #ifndef DRXJ_QAM_MAX_WAITTIME 282 #define DRXJ_QAM_MAX_WAITTIME 900 283 #endif 284 285 #ifndef DRXJ_QAM_FEC_LOCK_WAITTIME 286 #define DRXJ_QAM_FEC_LOCK_WAITTIME 150 287 #endif 288 289 #ifndef DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 290 #define DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 200 291 #endif 292 293 /* 294 * \def SCU status and results 295 * \brief SCU 296 */ 297 #define DRX_SCU_READY 0 298 #define DRXJ_MAX_WAITTIME 100 /* ms */ 299 #define FEC_RS_MEASUREMENT_PERIOD 12894 /* 1 sec */ 300 #define FEC_RS_MEASUREMENT_PRESCALE 1 /* n sec */ 301 302 /* 303 * \def DRX_AUD_MAX_DEVIATION 304 * \brief Needed for calculation of prescale feature in AUD 305 */ 306 #ifndef DRXJ_AUD_MAX_FM_DEVIATION 307 #define DRXJ_AUD_MAX_FM_DEVIATION 100 /* kHz */ 308 #endif 309 310 /* 311 * \brief Needed for calculation of NICAM prescale feature in AUD 312 */ 313 #ifndef DRXJ_AUD_MAX_NICAM_PRESCALE 314 #define DRXJ_AUD_MAX_NICAM_PRESCALE (9) /* dB */ 315 #endif 316 317 /* 318 * \brief Needed for calculation of NICAM prescale feature in AUD 319 */ 320 #ifndef DRXJ_AUD_MAX_WAITTIME 321 #define DRXJ_AUD_MAX_WAITTIME 250 /* ms */ 322 #endif 323 324 /* ATV config changed flags */ 325 #define DRXJ_ATV_CHANGED_COEF (0x00000001UL) 326 #define DRXJ_ATV_CHANGED_PEAK_FLT (0x00000008UL) 327 #define DRXJ_ATV_CHANGED_NOISE_FLT (0x00000010UL) 328 #define DRXJ_ATV_CHANGED_OUTPUT (0x00000020UL) 329 #define DRXJ_ATV_CHANGED_SIF_ATT (0x00000040UL) 330 331 /* UIO define */ 332 #define DRX_UIO_MODE_FIRMWARE_SMA DRX_UIO_MODE_FIRMWARE0 333 #define DRX_UIO_MODE_FIRMWARE_SAW DRX_UIO_MODE_FIRMWARE1 334 335 /* 336 * MICROCODE RELATED DEFINES 337 */ 338 339 /* Magic word for checking correct Endianness of microcode data */ 340 #define DRX_UCODE_MAGIC_WORD ((((u16)'H')<<8)+((u16)'L')) 341 342 /* CRC flag in ucode header, flags field. */ 343 #define DRX_UCODE_CRC_FLAG (0x0001) 344 345 /* 346 * Maximum size of buffer used to verify the microcode. 347 * Must be an even number 348 */ 349 #define DRX_UCODE_MAX_BUF_SIZE (DRXDAP_MAX_RCHUNKSIZE) 350 351 #if DRX_UCODE_MAX_BUF_SIZE & 1 352 #error DRX_UCODE_MAX_BUF_SIZE must be an even number 353 #endif 354 355 /* 356 * Power mode macros 357 */ 358 359 #define DRX_ISPOWERDOWNMODE(mode) ((mode == DRX_POWER_MODE_9) || \ 360 (mode == DRX_POWER_MODE_10) || \ 361 (mode == DRX_POWER_MODE_11) || \ 362 (mode == DRX_POWER_MODE_12) || \ 363 (mode == DRX_POWER_MODE_13) || \ 364 (mode == DRX_POWER_MODE_14) || \ 365 (mode == DRX_POWER_MODE_15) || \ 366 (mode == DRX_POWER_MODE_16) || \ 367 (mode == DRX_POWER_DOWN)) 368 369 /* Pin safe mode macro */ 370 #define DRXJ_PIN_SAFE_MODE 0x0000 371 /*============================================================================*/ 372 /*=== GLOBAL VARIABLEs =======================================================*/ 373 /*============================================================================*/ 374 /* 375 */ 376 377 /* 378 * \brief Temporary register definitions. 379 * (register definitions that are not yet available in register master) 380 */ 381 382 /*****************************************************************************/ 383 /* Audio block 0x103 is write only. To avoid shadowing in driver accessing */ 384 /* RAM adresses directly. This must be READ ONLY to avoid problems. */ 385 /* Writing to the interface adresses is more than only writing the RAM */ 386 /* locations */ 387 /*****************************************************************************/ 388 /* 389 * \brief RAM location of MODUS registers 390 */ 391 #define AUD_DEM_RAM_MODUS_HI__A 0x10204A3 392 #define AUD_DEM_RAM_MODUS_HI__M 0xF000 393 394 #define AUD_DEM_RAM_MODUS_LO__A 0x10204A4 395 #define AUD_DEM_RAM_MODUS_LO__M 0x0FFF 396 397 /* 398 * \brief RAM location of I2S config registers 399 */ 400 #define AUD_DEM_RAM_I2S_CONFIG1__A 0x10204B1 401 #define AUD_DEM_RAM_I2S_CONFIG2__A 0x10204B2 402 403 /* 404 * \brief RAM location of DCO config registers 405 */ 406 #define AUD_DEM_RAM_DCO_B_HI__A 0x1020461 407 #define AUD_DEM_RAM_DCO_B_LO__A 0x1020462 408 #define AUD_DEM_RAM_DCO_A_HI__A 0x1020463 409 #define AUD_DEM_RAM_DCO_A_LO__A 0x1020464 410 411 /* 412 * \brief RAM location of Threshold registers 413 */ 414 #define AUD_DEM_RAM_NICAM_THRSHLD__A 0x102045A 415 #define AUD_DEM_RAM_A2_THRSHLD__A 0x10204BB 416 #define AUD_DEM_RAM_BTSC_THRSHLD__A 0x10204A6 417 418 /* 419 * \brief RAM location of Carrier Threshold registers 420 */ 421 #define AUD_DEM_RAM_CM_A_THRSHLD__A 0x10204AF 422 #define AUD_DEM_RAM_CM_B_THRSHLD__A 0x10204B0 423 424 /* 425 * \brief FM Matrix register fix 426 */ 427 #ifdef AUD_DEM_WR_FM_MATRIX__A 428 #undef AUD_DEM_WR_FM_MATRIX__A 429 #endif 430 #define AUD_DEM_WR_FM_MATRIX__A 0x105006F 431 432 /*============================================================================*/ 433 /* 434 * \brief Defines required for audio 435 */ 436 #define AUD_VOLUME_ZERO_DB 115 437 #define AUD_VOLUME_DB_MIN -60 438 #define AUD_VOLUME_DB_MAX 12 439 #define AUD_CARRIER_STRENGTH_QP_0DB 0x4000 440 #define AUD_CARRIER_STRENGTH_QP_0DB_LOG10T100 421 441 #define AUD_MAX_AVC_REF_LEVEL 15 442 #define AUD_I2S_FREQUENCY_MAX 48000UL 443 #define AUD_I2S_FREQUENCY_MIN 12000UL 444 #define AUD_RDS_ARRAY_SIZE 18 445 446 /* 447 * \brief Needed for calculation of prescale feature in AUD 448 */ 449 #ifndef DRX_AUD_MAX_FM_DEVIATION 450 #define DRX_AUD_MAX_FM_DEVIATION (100) /* kHz */ 451 #endif 452 453 /* 454 * \brief Needed for calculation of NICAM prescale feature in AUD 455 */ 456 #ifndef DRX_AUD_MAX_NICAM_PRESCALE 457 #define DRX_AUD_MAX_NICAM_PRESCALE (9) /* dB */ 458 #endif 459 460 /*============================================================================*/ 461 /* Values for I2S Master/Slave pin configurations */ 462 #define SIO_PDR_I2S_CL_CFG_MODE__MASTER 0x0004 463 #define SIO_PDR_I2S_CL_CFG_DRIVE__MASTER 0x0008 464 #define SIO_PDR_I2S_CL_CFG_MODE__SLAVE 0x0004 465 #define SIO_PDR_I2S_CL_CFG_DRIVE__SLAVE 0x0000 466 467 #define SIO_PDR_I2S_DA_CFG_MODE__MASTER 0x0003 468 #define SIO_PDR_I2S_DA_CFG_DRIVE__MASTER 0x0008 469 #define SIO_PDR_I2S_DA_CFG_MODE__SLAVE 0x0003 470 #define SIO_PDR_I2S_DA_CFG_DRIVE__SLAVE 0x0008 471 472 #define SIO_PDR_I2S_WS_CFG_MODE__MASTER 0x0004 473 #define SIO_PDR_I2S_WS_CFG_DRIVE__MASTER 0x0008 474 #define SIO_PDR_I2S_WS_CFG_MODE__SLAVE 0x0004 475 #define SIO_PDR_I2S_WS_CFG_DRIVE__SLAVE 0x0000 476 477 /*============================================================================*/ 478 /*=== REGISTER ACCESS MACROS =================================================*/ 479 /*============================================================================*/ 480 481 /* 482 * This macro is used to create byte arrays for block writes. 483 * Block writes speed up I2C traffic between host and demod. 484 * The macro takes care of the required byte order in a 16 bits word. 485 * x -> lowbyte(x), highbyte(x) 486 */ 487 #define DRXJ_16TO8(x) ((u8) (((u16)x) & 0xFF)), \ 488 ((u8)((((u16)x)>>8)&0xFF)) 489 /* 490 * This macro is used to convert byte array to 16 bit register value for block read. 491 * Block read speed up I2C traffic between host and demod. 492 * The macro takes care of the required byte order in a 16 bits word. 493 */ 494 #define DRXJ_8TO16(x) ((u16) (x[0] | (x[1] << 8))) 495 496 /*============================================================================*/ 497 /*=== MISC DEFINES ===========================================================*/ 498 /*============================================================================*/ 499 500 /*============================================================================*/ 501 /*=== HI COMMAND RELATED DEFINES =============================================*/ 502 /*============================================================================*/ 503 504 /* 505 * \brief General maximum number of retries for ucode command interfaces 506 */ 507 #define DRXJ_MAX_RETRIES (100) 508 509 /*============================================================================*/ 510 /*=== STANDARD RELATED MACROS ================================================*/ 511 /*============================================================================*/ 512 513 #define DRXJ_ISATVSTD(std) ((std == DRX_STANDARD_PAL_SECAM_BG) || \ 514 (std == DRX_STANDARD_PAL_SECAM_DK) || \ 515 (std == DRX_STANDARD_PAL_SECAM_I) || \ 516 (std == DRX_STANDARD_PAL_SECAM_L) || \ 517 (std == DRX_STANDARD_PAL_SECAM_LP) || \ 518 (std == DRX_STANDARD_NTSC) || \ 519 (std == DRX_STANDARD_FM)) 520 521 #define DRXJ_ISQAMSTD(std) ((std == DRX_STANDARD_ITU_A) || \ 522 (std == DRX_STANDARD_ITU_B) || \ 523 (std == DRX_STANDARD_ITU_C) || \ 524 (std == DRX_STANDARD_ITU_D)) 525 526 /*----------------------------------------------------------------------------- 527 GLOBAL VARIABLES 528 ----------------------------------------------------------------------------*/ 529 /* 530 * DRXJ DAP structures 531 */ 532 533 static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr, 534 u32 addr, 535 u16 datasize, 536 u8 *data, u32 flags); 537 538 539 static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr, 540 u32 waddr, 541 u32 raddr, 542 u16 wdata, u16 *rdata); 543 544 static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr, 545 u32 addr, 546 u16 *data, u32 flags); 547 548 static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr, 549 u32 addr, 550 u32 *data, u32 flags); 551 552 static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr, 553 u32 addr, 554 u16 datasize, 555 u8 *data, u32 flags); 556 557 static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr, 558 u32 addr, 559 u16 data, u32 flags); 560 561 static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr, 562 u32 addr, 563 u32 data, u32 flags); 564 565 static struct drxj_data drxj_data_g = { 566 false, /* has_lna : true if LNA (aka PGA) present */ 567 false, /* has_oob : true if OOB supported */ 568 false, /* has_ntsc: true if NTSC supported */ 569 false, /* has_btsc: true if BTSC supported */ 570 false, /* has_smatx: true if SMA_TX pin is available */ 571 false, /* has_smarx: true if SMA_RX pin is available */ 572 false, /* has_gpio : true if GPIO pin is available */ 573 false, /* has_irqn : true if IRQN pin is available */ 574 0, /* mfx A1/A2/A... */ 575 576 /* tuner settings */ 577 false, /* tuner mirrors RF signal */ 578 /* standard/channel settings */ 579 DRX_STANDARD_UNKNOWN, /* current standard */ 580 DRX_CONSTELLATION_AUTO, /* constellation */ 581 0, /* frequency in KHz */ 582 DRX_BANDWIDTH_UNKNOWN, /* curr_bandwidth */ 583 DRX_MIRROR_NO, /* mirror */ 584 585 /* signal quality information: */ 586 /* default values taken from the QAM Programming guide */ 587 /* fec_bits_desired should not be less than 4000000 */ 588 4000000, /* fec_bits_desired */ 589 5, /* fec_vd_plen */ 590 4, /* qam_vd_prescale */ 591 0xFFFF, /* qamVDPeriod */ 592 204 * 8, /* fec_rs_plen annex A */ 593 1, /* fec_rs_prescale */ 594 FEC_RS_MEASUREMENT_PERIOD, /* fec_rs_period */ 595 true, /* reset_pkt_err_acc */ 596 0, /* pkt_err_acc_start */ 597 598 /* HI configuration */ 599 0, /* hi_cfg_timing_div */ 600 0, /* hi_cfg_bridge_delay */ 601 0, /* hi_cfg_wake_up_key */ 602 0, /* hi_cfg_ctrl */ 603 0, /* HICfgTimeout */ 604 /* UIO configuration */ 605 DRX_UIO_MODE_DISABLE, /* uio_sma_rx_mode */ 606 DRX_UIO_MODE_DISABLE, /* uio_sma_tx_mode */ 607 DRX_UIO_MODE_DISABLE, /* uioASELMode */ 608 DRX_UIO_MODE_DISABLE, /* uio_irqn_mode */ 609 /* FS setting */ 610 0UL, /* iqm_fs_rate_ofs */ 611 false, /* pos_image */ 612 /* RC setting */ 613 0UL, /* iqm_rc_rate_ofs */ 614 /* AUD information */ 615 /* false, * flagSetAUDdone */ 616 /* false, * detectedRDS */ 617 /* true, * flagASDRequest */ 618 /* false, * flagHDevClear */ 619 /* false, * flagHDevSet */ 620 /* (u16) 0xFFF, * rdsLastCount */ 621 622 /* ATV configuration */ 623 0UL, /* flags cfg changes */ 624 /* shadow of ATV_TOP_EQU0__A */ 625 {-5, 626 ATV_TOP_EQU0_EQU_C0_FM, 627 ATV_TOP_EQU0_EQU_C0_L, 628 ATV_TOP_EQU0_EQU_C0_LP, 629 ATV_TOP_EQU0_EQU_C0_BG, 630 ATV_TOP_EQU0_EQU_C0_DK, 631 ATV_TOP_EQU0_EQU_C0_I}, 632 /* shadow of ATV_TOP_EQU1__A */ 633 {-50, 634 ATV_TOP_EQU1_EQU_C1_FM, 635 ATV_TOP_EQU1_EQU_C1_L, 636 ATV_TOP_EQU1_EQU_C1_LP, 637 ATV_TOP_EQU1_EQU_C1_BG, 638 ATV_TOP_EQU1_EQU_C1_DK, 639 ATV_TOP_EQU1_EQU_C1_I}, 640 /* shadow of ATV_TOP_EQU2__A */ 641 {210, 642 ATV_TOP_EQU2_EQU_C2_FM, 643 ATV_TOP_EQU2_EQU_C2_L, 644 ATV_TOP_EQU2_EQU_C2_LP, 645 ATV_TOP_EQU2_EQU_C2_BG, 646 ATV_TOP_EQU2_EQU_C2_DK, 647 ATV_TOP_EQU2_EQU_C2_I}, 648 /* shadow of ATV_TOP_EQU3__A */ 649 {-160, 650 ATV_TOP_EQU3_EQU_C3_FM, 651 ATV_TOP_EQU3_EQU_C3_L, 652 ATV_TOP_EQU3_EQU_C3_LP, 653 ATV_TOP_EQU3_EQU_C3_BG, 654 ATV_TOP_EQU3_EQU_C3_DK, 655 ATV_TOP_EQU3_EQU_C3_I}, 656 false, /* flag: true=bypass */ 657 ATV_TOP_VID_PEAK__PRE, /* shadow of ATV_TOP_VID_PEAK__A */ 658 ATV_TOP_NOISE_TH__PRE, /* shadow of ATV_TOP_NOISE_TH__A */ 659 true, /* flag CVBS ouput enable */ 660 false, /* flag SIF ouput enable */ 661 DRXJ_SIF_ATTENUATION_0DB, /* current SIF att setting */ 662 { /* qam_rf_agc_cfg */ 663 DRX_STANDARD_ITU_B, /* standard */ 664 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 665 0, /* output_level */ 666 0, /* min_output_level */ 667 0xFFFF, /* max_output_level */ 668 0x0000, /* speed */ 669 0x0000, /* top */ 670 0x0000 /* c.o.c. */ 671 }, 672 { /* qam_if_agc_cfg */ 673 DRX_STANDARD_ITU_B, /* standard */ 674 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 675 0, /* output_level */ 676 0, /* min_output_level */ 677 0xFFFF, /* max_output_level */ 678 0x0000, /* speed */ 679 0x0000, /* top (don't care) */ 680 0x0000 /* c.o.c. (don't care) */ 681 }, 682 { /* vsb_rf_agc_cfg */ 683 DRX_STANDARD_8VSB, /* standard */ 684 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 685 0, /* output_level */ 686 0, /* min_output_level */ 687 0xFFFF, /* max_output_level */ 688 0x0000, /* speed */ 689 0x0000, /* top (don't care) */ 690 0x0000 /* c.o.c. (don't care) */ 691 }, 692 { /* vsb_if_agc_cfg */ 693 DRX_STANDARD_8VSB, /* standard */ 694 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 695 0, /* output_level */ 696 0, /* min_output_level */ 697 0xFFFF, /* max_output_level */ 698 0x0000, /* speed */ 699 0x0000, /* top (don't care) */ 700 0x0000 /* c.o.c. (don't care) */ 701 }, 702 0, /* qam_pga_cfg */ 703 0, /* vsb_pga_cfg */ 704 { /* qam_pre_saw_cfg */ 705 DRX_STANDARD_ITU_B, /* standard */ 706 0, /* reference */ 707 false /* use_pre_saw */ 708 }, 709 { /* vsb_pre_saw_cfg */ 710 DRX_STANDARD_8VSB, /* standard */ 711 0, /* reference */ 712 false /* use_pre_saw */ 713 }, 714 715 /* Version information */ 716 #ifndef _CH_ 717 { 718 "01234567890", /* human readable version microcode */ 719 "01234567890" /* human readable version device specific code */ 720 }, 721 { 722 { /* struct drx_version for microcode */ 723 DRX_MODULE_UNKNOWN, 724 (char *)(NULL), 725 0, 726 0, 727 0, 728 (char *)(NULL) 729 }, 730 { /* struct drx_version for device specific code */ 731 DRX_MODULE_UNKNOWN, 732 (char *)(NULL), 733 0, 734 0, 735 0, 736 (char *)(NULL) 737 } 738 }, 739 { 740 { /* struct drx_version_list for microcode */ 741 (struct drx_version *) (NULL), 742 (struct drx_version_list *) (NULL) 743 }, 744 { /* struct drx_version_list for device specific code */ 745 (struct drx_version *) (NULL), 746 (struct drx_version_list *) (NULL) 747 } 748 }, 749 #endif 750 false, /* smart_ant_inverted */ 751 /* Tracking filter setting for OOB */ 752 { 753 12000, 754 9300, 755 6600, 756 5280, 757 3700, 758 3000, 759 2000, 760 0}, 761 false, /* oob_power_on */ 762 0, /* mpeg_ts_static_bitrate */ 763 false, /* disable_te_ihandling */ 764 false, /* bit_reverse_mpeg_outout */ 765 DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO, /* mpeg_output_clock_rate */ 766 DRXJ_MPEG_START_WIDTH_1CLKCYC, /* mpeg_start_width */ 767 768 /* Pre SAW & Agc configuration for ATV */ 769 { 770 DRX_STANDARD_NTSC, /* standard */ 771 7, /* reference */ 772 true /* use_pre_saw */ 773 }, 774 { /* ATV RF-AGC */ 775 DRX_STANDARD_NTSC, /* standard */ 776 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 777 0, /* output_level */ 778 0, /* min_output_level (d.c.) */ 779 0, /* max_output_level (d.c.) */ 780 3, /* speed */ 781 9500, /* top */ 782 4000 /* cut-off current */ 783 }, 784 { /* ATV IF-AGC */ 785 DRX_STANDARD_NTSC, /* standard */ 786 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 787 0, /* output_level */ 788 0, /* min_output_level (d.c.) */ 789 0, /* max_output_level (d.c.) */ 790 3, /* speed */ 791 2400, /* top */ 792 0 /* c.o.c. (d.c.) */ 793 }, 794 140, /* ATV PGA config */ 795 0, /* curr_symbol_rate */ 796 797 false, /* pdr_safe_mode */ 798 SIO_PDR_GPIO_CFG__PRE, /* pdr_safe_restore_val_gpio */ 799 SIO_PDR_VSYNC_CFG__PRE, /* pdr_safe_restore_val_v_sync */ 800 SIO_PDR_SMA_RX_CFG__PRE, /* pdr_safe_restore_val_sma_rx */ 801 SIO_PDR_SMA_TX_CFG__PRE, /* pdr_safe_restore_val_sma_tx */ 802 803 4, /* oob_pre_saw */ 804 DRXJ_OOB_LO_POW_MINUS10DB, /* oob_lo_pow */ 805 { 806 false /* aud_data, only first member */ 807 }, 808 }; 809 810 /* 811 * \var drxj_default_addr_g 812 * \brief Default I2C address and device identifier. 813 */ 814 static struct i2c_device_addr drxj_default_addr_g = { 815 DRXJ_DEF_I2C_ADDR, /* i2c address */ 816 DRXJ_DEF_DEMOD_DEV_ID /* device id */ 817 }; 818 819 /* 820 * \var drxj_default_comm_attr_g 821 * \brief Default common attributes of a drxj demodulator instance. 822 */ 823 static struct drx_common_attr drxj_default_comm_attr_g = { 824 NULL, /* ucode file */ 825 true, /* ucode verify switch */ 826 {0}, /* version record */ 827 828 44000, /* IF in kHz in case no tuner instance is used */ 829 (151875 - 0), /* system clock frequency in kHz */ 830 0, /* oscillator frequency kHz */ 831 0, /* oscillator deviation in ppm, signed */ 832 false, /* If true mirror frequency spectrum */ 833 { 834 /* MPEG output configuration */ 835 true, /* If true, enable MPEG ouput */ 836 false, /* If true, insert RS byte */ 837 false, /* If true, parallel out otherwise serial */ 838 false, /* If true, invert DATA signals */ 839 false, /* If true, invert ERR signal */ 840 false, /* If true, invert STR signals */ 841 false, /* If true, invert VAL signals */ 842 false, /* If true, invert CLK signals */ 843 true, /* If true, static MPEG clockrate will 844 be used, otherwise clockrate will 845 adapt to the bitrate of the TS */ 846 19392658UL, /* Maximum bitrate in b/s in case 847 static clockrate is selected */ 848 DRX_MPEG_STR_WIDTH_1 /* MPEG Start width in clock cycles */ 849 }, 850 /* Initilisations below can be omitted, they require no user input and 851 are initialy 0, NULL or false. The compiler will initialize them to these 852 values when omitted. */ 853 false, /* is_opened */ 854 855 /* SCAN */ 856 NULL, /* no scan params yet */ 857 0, /* current scan index */ 858 0, /* next scan frequency */ 859 false, /* scan ready flag */ 860 0, /* max channels to scan */ 861 0, /* nr of channels scanned */ 862 NULL, /* default scan function */ 863 NULL, /* default context pointer */ 864 0, /* millisec to wait for demod lock */ 865 DRXJ_DEMOD_LOCK, /* desired lock */ 866 false, 867 868 /* Power management */ 869 DRX_POWER_UP, 870 871 /* Tuner */ 872 1, /* nr of I2C port to wich tuner is */ 873 0L, /* minimum RF input frequency, in kHz */ 874 0L, /* maximum RF input frequency, in kHz */ 875 false, /* Rf Agc Polarity */ 876 false, /* If Agc Polarity */ 877 false, /* tuner slow mode */ 878 879 { /* current channel (all 0) */ 880 0UL /* channel.frequency */ 881 }, 882 DRX_STANDARD_UNKNOWN, /* current standard */ 883 DRX_STANDARD_UNKNOWN, /* previous standard */ 884 DRX_STANDARD_UNKNOWN, /* di_cache_standard */ 885 false, /* use_bootloader */ 886 0UL, /* capabilities */ 887 0 /* mfx */ 888 }; 889 890 /* 891 * \var drxj_default_demod_g 892 * \brief Default drxj demodulator instance. 893 */ 894 static struct drx_demod_instance drxj_default_demod_g = { 895 &drxj_default_addr_g, /* i2c address & device id */ 896 &drxj_default_comm_attr_g, /* demod common attributes */ 897 &drxj_data_g /* demod device specific attributes */ 898 }; 899 900 /* 901 * \brief Default audio data structure for DRK demodulator instance. 902 * 903 * This structure is DRXK specific. 904 * 905 */ 906 static struct drx_aud_data drxj_default_aud_data_g = { 907 false, /* audio_is_active */ 908 DRX_AUD_STANDARD_AUTO, /* audio_standard */ 909 910 /* i2sdata */ 911 { 912 false, /* output_enable */ 913 48000, /* frequency */ 914 DRX_I2S_MODE_MASTER, /* mode */ 915 DRX_I2S_WORDLENGTH_32, /* word_length */ 916 DRX_I2S_POLARITY_RIGHT, /* polarity */ 917 DRX_I2S_FORMAT_WS_WITH_DATA /* format */ 918 }, 919 /* volume */ 920 { 921 true, /* mute; */ 922 0, /* volume */ 923 DRX_AUD_AVC_OFF, /* avc_mode */ 924 0, /* avc_ref_level */ 925 DRX_AUD_AVC_MAX_GAIN_12DB, /* avc_max_gain */ 926 DRX_AUD_AVC_MAX_ATTEN_24DB, /* avc_max_atten */ 927 0, /* strength_left */ 928 0 /* strength_right */ 929 }, 930 DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_ON, /* auto_sound */ 931 /* ass_thresholds */ 932 { 933 440, /* A2 */ 934 12, /* BTSC */ 935 700, /* NICAM */ 936 }, 937 /* carrier */ 938 { 939 /* a */ 940 { 941 42, /* thres */ 942 DRX_NO_CARRIER_NOISE, /* opt */ 943 0, /* shift */ 944 0 /* dco */ 945 }, 946 /* b */ 947 { 948 42, /* thres */ 949 DRX_NO_CARRIER_MUTE, /* opt */ 950 0, /* shift */ 951 0 /* dco */ 952 }, 953 954 }, 955 /* mixer */ 956 { 957 DRX_AUD_SRC_STEREO_OR_A, /* source_i2s */ 958 DRX_AUD_I2S_MATRIX_STEREO, /* matrix_i2s */ 959 DRX_AUD_FM_MATRIX_SOUND_A /* matrix_fm */ 960 }, 961 DRX_AUD_DEVIATION_NORMAL, /* deviation */ 962 DRX_AUD_AVSYNC_OFF, /* av_sync */ 963 964 /* prescale */ 965 { 966 DRX_AUD_MAX_FM_DEVIATION, /* fm_deviation */ 967 DRX_AUD_MAX_NICAM_PRESCALE /* nicam_gain */ 968 }, 969 DRX_AUD_FM_DEEMPH_75US, /* deemph */ 970 DRX_BTSC_STEREO, /* btsc_detect */ 971 0, /* rds_data_counter */ 972 false /* rds_data_present */ 973 }; 974 975 /*----------------------------------------------------------------------------- 976 STRUCTURES 977 ----------------------------------------------------------------------------*/ 978 struct drxjeq_stat { 979 u16 eq_mse; 980 u8 eq_mode; 981 u8 eq_ctrl; 982 u8 eq_stat; 983 }; 984 985 /* HI command */ 986 struct drxj_hi_cmd { 987 u16 cmd; 988 u16 param1; 989 u16 param2; 990 u16 param3; 991 u16 param4; 992 u16 param5; 993 u16 param6; 994 }; 995 996 /*============================================================================*/ 997 /*=== MICROCODE RELATED STRUCTURES ===========================================*/ 998 /*============================================================================*/ 999 1000 /* 1001 * struct drxu_code_block_hdr - Structure of the microcode block headers 1002 * 1003 * @addr: Destination address of the data in this block 1004 * @size: Size of the block data following this header counted in 1005 * 16 bits words 1006 * @CRC: CRC value of the data block, only valid if CRC flag is 1007 * set. 1008 */ 1009 struct drxu_code_block_hdr { 1010 u32 addr; 1011 u16 size; 1012 u16 flags; 1013 u16 CRC; 1014 }; 1015 1016 /*----------------------------------------------------------------------------- 1017 FUNCTIONS 1018 ----------------------------------------------------------------------------*/ 1019 /* Some prototypes */ 1020 static int 1021 hi_command(struct i2c_device_addr *dev_addr, 1022 const struct drxj_hi_cmd *cmd, u16 *result); 1023 1024 static int 1025 ctrl_lock_status(struct drx_demod_instance *demod, enum drx_lock_status *lock_stat); 1026 1027 static int 1028 ctrl_power_mode(struct drx_demod_instance *demod, enum drx_power_mode *mode); 1029 1030 static int power_down_aud(struct drx_demod_instance *demod); 1031 1032 static int 1033 ctrl_set_cfg_pre_saw(struct drx_demod_instance *demod, struct drxj_cfg_pre_saw *pre_saw); 1034 1035 static int 1036 ctrl_set_cfg_afe_gain(struct drx_demod_instance *demod, struct drxj_cfg_afe_gain *afe_gain); 1037 1038 /*============================================================================*/ 1039 /*============================================================================*/ 1040 /*== HELPER FUNCTIONS ==*/ 1041 /*============================================================================*/ 1042 /*============================================================================*/ 1043 1044 1045 /*============================================================================*/ 1046 1047 /* 1048 * \fn u32 frac28(u32 N, u32 D) 1049 * \brief Compute: (1<<28)*N/D 1050 * \param N 32 bits 1051 * \param D 32 bits 1052 * \return (1<<28)*N/D 1053 * This function is used to avoid floating-point calculations as they may 1054 * not be present on the target platform. 1055 1056 * frac28 performs an unsigned 28/28 bits division to 32-bit fixed point 1057 * fraction used for setting the Frequency Shifter registers. 1058 * N and D can hold numbers up to width: 28-bits. 1059 * The 4 bits integer part and the 28 bits fractional part are calculated. 1060 1061 * Usage condition: ((1<<28)*n)/d < ((1<<32)-1) => (n/d) < 15.999 1062 1063 * N: 0...(1<<28)-1 = 268435454 1064 * D: 0...(1<<28)-1 1065 * Q: 0...(1<<32)-1 1066 */ 1067 static u32 frac28(u32 N, u32 D) 1068 { 1069 int i = 0; 1070 u32 Q1 = 0; 1071 u32 R0 = 0; 1072 1073 R0 = (N % D) << 4; /* 32-28 == 4 shifts possible at max */ 1074 Q1 = N / D; /* integer part, only the 4 least significant bits 1075 will be visible in the result */ 1076 1077 /* division using radix 16, 7 nibbles in the result */ 1078 for (i = 0; i < 7; i++) { 1079 Q1 = (Q1 << 4) | R0 / D; 1080 R0 = (R0 % D) << 4; 1081 } 1082 /* rounding */ 1083 if ((R0 >> 3) >= D) 1084 Q1++; 1085 1086 return Q1; 1087 } 1088 1089 /* 1090 * \fn u32 log1_times100( u32 x) 1091 * \brief Compute: 100*log10(x) 1092 * \param x 32 bits 1093 * \return 100*log10(x) 1094 * 1095 * 100*log10(x) 1096 * = 100*(log2(x)/log2(10))) 1097 * = (100*(2^15)*log2(x))/((2^15)*log2(10)) 1098 * = ((200*(2^15)*log2(x))/((2^15)*log2(10)))/2 1099 * = ((200*(2^15)*(log2(x/y)+log2(y)))/((2^15)*log2(10)))/2 1100 * = ((200*(2^15)*log2(x/y))+(200*(2^15)*log2(y)))/((2^15)*log2(10)))/2 1101 * 1102 * where y = 2^k and 1<= (x/y) < 2 1103 */ 1104 1105 static u32 log1_times100(u32 x) 1106 { 1107 static const u8 scale = 15; 1108 static const u8 index_width = 5; 1109 /* 1110 log2lut[n] = (1<<scale) * 200 * log2( 1.0 + ( (1.0/(1<<INDEXWIDTH)) * n )) 1111 0 <= n < ((1<<INDEXWIDTH)+1) 1112 */ 1113 1114 static const u32 log2lut[] = { 1115 0, /* 0.000000 */ 1116 290941, /* 290941.300628 */ 1117 573196, /* 573196.476418 */ 1118 847269, /* 847269.179851 */ 1119 1113620, /* 1113620.489452 */ 1120 1372674, /* 1372673.576986 */ 1121 1624818, /* 1624817.752104 */ 1122 1870412, /* 1870411.981536 */ 1123 2109788, /* 2109787.962654 */ 1124 2343253, /* 2343252.817465 */ 1125 2571091, /* 2571091.461923 */ 1126 2793569, /* 2793568.696416 */ 1127 3010931, /* 3010931.055901 */ 1128 3223408, /* 3223408.452106 */ 1129 3431216, /* 3431215.635215 */ 1130 3634553, /* 3634553.498355 */ 1131 3833610, /* 3833610.244726 */ 1132 4028562, /* 4028562.434393 */ 1133 4219576, /* 4219575.925308 */ 1134 4406807, /* 4406806.721144 */ 1135 4590402, /* 4590401.736809 */ 1136 4770499, /* 4770499.491025 */ 1137 4947231, /* 4947230.734179 */ 1138 5120719, /* 5120719.018555 */ 1139 5291081, /* 5291081.217197 */ 1140 5458428, /* 5458427.996830 */ 1141 5622864, /* 5622864.249668 */ 1142 5784489, /* 5784489.488298 */ 1143 5943398, /* 5943398.207380 */ 1144 6099680, /* 6099680.215452 */ 1145 6253421, /* 6253420.939751 */ 1146 6404702, /* 6404701.706649 */ 1147 6553600, /* 6553600.000000 */ 1148 }; 1149 1150 u8 i = 0; 1151 u32 y = 0; 1152 u32 d = 0; 1153 u32 k = 0; 1154 u32 r = 0; 1155 1156 if (x == 0) 1157 return 0; 1158 1159 /* Scale x (normalize) */ 1160 /* computing y in log(x/y) = log(x) - log(y) */ 1161 if ((x & (((u32) (-1)) << (scale + 1))) == 0) { 1162 for (k = scale; k > 0; k--) { 1163 if (x & (((u32) 1) << scale)) 1164 break; 1165 x <<= 1; 1166 } 1167 } else { 1168 for (k = scale; k < 31; k++) { 1169 if ((x & (((u32) (-1)) << (scale + 1))) == 0) 1170 break; 1171 x >>= 1; 1172 } 1173 } 1174 /* 1175 Now x has binary point between bit[scale] and bit[scale-1] 1176 and 1.0 <= x < 2.0 */ 1177 1178 /* correction for division: log(x) = log(x/y)+log(y) */ 1179 y = k * ((((u32) 1) << scale) * 200); 1180 1181 /* remove integer part */ 1182 x &= ((((u32) 1) << scale) - 1); 1183 /* get index */ 1184 i = (u8) (x >> (scale - index_width)); 1185 /* compute delta (x-a) */ 1186 d = x & ((((u32) 1) << (scale - index_width)) - 1); 1187 /* compute log, multiplication ( d* (.. )) must be within range ! */ 1188 y += log2lut[i] + 1189 ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - index_width)); 1190 /* Conver to log10() */ 1191 y /= 108853; /* (log2(10) << scale) */ 1192 r = (y >> 1); 1193 /* rounding */ 1194 if (y & ((u32)1)) 1195 r++; 1196 1197 return r; 1198 1199 } 1200 1201 /* 1202 * \fn u32 frac_times1e6( u16 N, u32 D) 1203 * \brief Compute: (N/D) * 1000000. 1204 * \param N nominator 16-bits. 1205 * \param D denominator 32-bits. 1206 * \return u32 1207 * \retval ((N/D) * 1000000), 32 bits 1208 * 1209 * No check on D=0! 1210 */ 1211 static u32 frac_times1e6(u32 N, u32 D) 1212 { 1213 u32 remainder = 0; 1214 u32 frac = 0; 1215 1216 /* 1217 frac = (N * 1000000) / D 1218 To let it fit in a 32 bits computation: 1219 frac = (N * (1000000 >> 4)) / (D >> 4) 1220 This would result in a problem in case D < 16 (div by 0). 1221 So we do it more elaborate as shown below. 1222 */ 1223 frac = (((u32) N) * (1000000 >> 4)) / D; 1224 frac <<= 4; 1225 remainder = (((u32) N) * (1000000 >> 4)) % D; 1226 remainder <<= 4; 1227 frac += remainder / D; 1228 remainder = remainder % D; 1229 if ((remainder * 2) > D) 1230 frac++; 1231 1232 return frac; 1233 } 1234 1235 /*============================================================================*/ 1236 1237 1238 /* 1239 * \brief Values for NICAM prescaler gain. Computed from dB to integer 1240 * and rounded. For calc used formula: 16*10^(prescaleGain[dB]/20). 1241 * 1242 */ 1243 #if 0 1244 /* Currently, unused as we lack support for analog TV */ 1245 static const u16 nicam_presc_table_val[43] = { 1246 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4, 1247 5, 5, 6, 6, 7, 8, 9, 10, 11, 13, 14, 16, 1248 18, 20, 23, 25, 28, 32, 36, 40, 45, 1249 51, 57, 64, 71, 80, 90, 101, 113, 127 1250 }; 1251 #endif 1252 1253 /*============================================================================*/ 1254 /*== END HELPER FUNCTIONS ==*/ 1255 /*============================================================================*/ 1256 1257 /*============================================================================*/ 1258 /*============================================================================*/ 1259 /*== DRXJ DAP FUNCTIONS ==*/ 1260 /*============================================================================*/ 1261 /*============================================================================*/ 1262 1263 /* 1264 This layer takes care of some device specific register access protocols: 1265 -conversion to short address format 1266 -access to audio block 1267 This layer is placed between the drx_dap_fasi and the rest of the drxj 1268 specific implementation. This layer can use address map knowledge whereas 1269 dap_fasi may not use memory map knowledge. 1270 1271 * For audio currently only 16 bits read and write register access is 1272 supported. More is not needed. RMW and 32 or 8 bit access on audio 1273 registers will have undefined behaviour. Flags (RMW, CRC reset, broadcast 1274 single/multi master) will be ignored. 1275 1276 TODO: check ignoring single/multimaster is ok for AUD access ? 1277 */ 1278 1279 #define DRXJ_ISAUDWRITE(addr) (((((addr)>>16)&1) == 1) ? true : false) 1280 #define DRXJ_DAP_AUDTRIF_TIMEOUT 80 /* millisec */ 1281 /*============================================================================*/ 1282 1283 /* 1284 * \fn bool is_handled_by_aud_tr_if( u32 addr ) 1285 * \brief Check if this address is handled by the audio token ring interface. 1286 * \param addr 1287 * \return bool 1288 * \retval true Yes, handled by audio token ring interface 1289 * \retval false No, not handled by audio token ring interface 1290 * 1291 */ 1292 static 1293 bool is_handled_by_aud_tr_if(u32 addr) 1294 { 1295 bool retval = false; 1296 1297 if ((DRXDAP_FASI_ADDR2BLOCK(addr) == 4) && 1298 (DRXDAP_FASI_ADDR2BANK(addr) > 1) && 1299 (DRXDAP_FASI_ADDR2BANK(addr) < 6)) { 1300 retval = true; 1301 } 1302 1303 return retval; 1304 } 1305 1306 /*============================================================================*/ 1307 1308 int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr, 1309 u16 w_count, 1310 u8 *wData, 1311 struct i2c_device_addr *r_dev_addr, 1312 u16 r_count, u8 *r_data) 1313 { 1314 struct drx39xxj_state *state; 1315 struct i2c_msg msg[2]; 1316 unsigned int num_msgs; 1317 1318 if (w_dev_addr == NULL) { 1319 /* Read only */ 1320 state = r_dev_addr->user_data; 1321 msg[0].addr = r_dev_addr->i2c_addr >> 1; 1322 msg[0].flags = I2C_M_RD; 1323 msg[0].buf = r_data; 1324 msg[0].len = r_count; 1325 num_msgs = 1; 1326 } else if (r_dev_addr == NULL) { 1327 /* Write only */ 1328 state = w_dev_addr->user_data; 1329 msg[0].addr = w_dev_addr->i2c_addr >> 1; 1330 msg[0].flags = 0; 1331 msg[0].buf = wData; 1332 msg[0].len = w_count; 1333 num_msgs = 1; 1334 } else { 1335 /* Both write and read */ 1336 state = w_dev_addr->user_data; 1337 msg[0].addr = w_dev_addr->i2c_addr >> 1; 1338 msg[0].flags = 0; 1339 msg[0].buf = wData; 1340 msg[0].len = w_count; 1341 msg[1].addr = r_dev_addr->i2c_addr >> 1; 1342 msg[1].flags = I2C_M_RD; 1343 msg[1].buf = r_data; 1344 msg[1].len = r_count; 1345 num_msgs = 2; 1346 } 1347 1348 if (state->i2c == NULL) { 1349 pr_err("i2c was zero, aborting\n"); 1350 return 0; 1351 } 1352 if (i2c_transfer(state->i2c, msg, num_msgs) != num_msgs) { 1353 pr_warn("drx3933: I2C write/read failed\n"); 1354 return -EREMOTEIO; 1355 } 1356 1357 #ifdef DJH_DEBUG 1358 if (w_dev_addr == NULL || r_dev_addr == NULL) 1359 return 0; 1360 1361 state = w_dev_addr->user_data; 1362 1363 if (state->i2c == NULL) 1364 return 0; 1365 1366 msg[0].addr = w_dev_addr->i2c_addr; 1367 msg[0].flags = 0; 1368 msg[0].buf = wData; 1369 msg[0].len = w_count; 1370 msg[1].addr = r_dev_addr->i2c_addr; 1371 msg[1].flags = I2C_M_RD; 1372 msg[1].buf = r_data; 1373 msg[1].len = r_count; 1374 num_msgs = 2; 1375 1376 pr_debug("drx3933 i2c operation addr=%x i2c=%p, wc=%x rc=%x\n", 1377 w_dev_addr->i2c_addr, state->i2c, w_count, r_count); 1378 1379 if (i2c_transfer(state->i2c, msg, 2) != 2) { 1380 pr_warn("drx3933: I2C write/read failed\n"); 1381 return -EREMOTEIO; 1382 } 1383 #endif 1384 return 0; 1385 } 1386 1387 /*============================================================================*/ 1388 1389 /***************************** 1390 * 1391 * int drxdap_fasi_read_block ( 1392 * struct i2c_device_addr *dev_addr, -- address of I2C device 1393 * u32 addr, -- address of chip register/memory 1394 * u16 datasize, -- number of bytes to read 1395 * u8 *data, -- data to receive 1396 * u32 flags) -- special device flags 1397 * 1398 * Read block data from chip address. Because the chip is word oriented, 1399 * the number of bytes to read must be even. 1400 * 1401 * Make sure that the buffer to receive the data is large enough. 1402 * 1403 * Although this function expects an even number of bytes, it is still byte 1404 * oriented, and the data read back is NOT translated to the endianness of 1405 * the target platform. 1406 * 1407 * Output: 1408 * - 0 if reading was successful 1409 * in that case: data read is in *data. 1410 * - -EIO if anything went wrong 1411 * 1412 ******************************/ 1413 1414 static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr, 1415 u32 addr, 1416 u16 datasize, 1417 u8 *data, u32 flags) 1418 { 1419 u8 buf[4]; 1420 u16 bufx; 1421 int rc; 1422 u16 overhead_size = 0; 1423 1424 /* Check parameters ******************************************************* */ 1425 if (dev_addr == NULL) 1426 return -EINVAL; 1427 1428 overhead_size = (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1) + 1429 (DRXDAP_FASI_LONG_FORMAT(addr) ? 4 : 2); 1430 1431 if ((DRXDAP_FASI_OFFSET_TOO_LARGE(addr)) || 1432 ((!(DRXDAPFASI_LONG_ADDR_ALLOWED)) && 1433 DRXDAP_FASI_LONG_FORMAT(addr)) || 1434 (overhead_size > (DRXDAP_MAX_WCHUNKSIZE)) || 1435 ((datasize != 0) && (data == NULL)) || ((datasize & 1) == 1)) { 1436 return -EINVAL; 1437 } 1438 1439 /* ReadModifyWrite & mode flag bits are not allowed */ 1440 flags &= (~DRXDAP_FASI_RMW & ~DRXDAP_FASI_MODEFLAGS); 1441 #if DRXDAP_SINGLE_MASTER 1442 flags |= DRXDAP_FASI_SINGLE_MASTER; 1443 #endif 1444 1445 /* Read block from I2C **************************************************** */ 1446 do { 1447 u16 todo = (datasize < DRXDAP_MAX_RCHUNKSIZE ? 1448 datasize : DRXDAP_MAX_RCHUNKSIZE); 1449 1450 bufx = 0; 1451 1452 addr &= ~DRXDAP_FASI_FLAGS; 1453 addr |= flags; 1454 1455 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 1456 /* short format address preferred but long format otherwise */ 1457 if (DRXDAP_FASI_LONG_FORMAT(addr)) { 1458 #endif 1459 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1) 1460 buf[bufx++] = (u8) (((addr << 1) & 0xFF) | 0x01); 1461 buf[bufx++] = (u8) ((addr >> 16) & 0xFF); 1462 buf[bufx++] = (u8) ((addr >> 24) & 0xFF); 1463 buf[bufx++] = (u8) ((addr >> 7) & 0xFF); 1464 #endif 1465 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 1466 } else { 1467 #endif 1468 #if (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1) 1469 buf[bufx++] = (u8) ((addr << 1) & 0xFF); 1470 buf[bufx++] = 1471 (u8) (((addr >> 16) & 0x0F) | 1472 ((addr >> 18) & 0xF0)); 1473 #endif 1474 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 1475 } 1476 #endif 1477 1478 #if DRXDAP_SINGLE_MASTER 1479 /* 1480 * In single master mode, split the read and write actions. 1481 * No special action is needed for write chunks here. 1482 */ 1483 rc = drxbsp_i2c_write_read(dev_addr, bufx, buf, 1484 NULL, 0, NULL); 1485 if (rc == 0) 1486 rc = drxbsp_i2c_write_read(NULL, 0, NULL, dev_addr, todo, data); 1487 #else 1488 /* In multi master mode, do everything in one RW action */ 1489 rc = drxbsp_i2c_write_read(dev_addr, bufx, buf, dev_addr, todo, 1490 data); 1491 #endif 1492 data += todo; 1493 addr += (todo >> 1); 1494 datasize -= todo; 1495 } while (datasize && rc == 0); 1496 1497 return rc; 1498 } 1499 1500 1501 /***************************** 1502 * 1503 * int drxdap_fasi_read_reg16 ( 1504 * struct i2c_device_addr *dev_addr, -- address of I2C device 1505 * u32 addr, -- address of chip register/memory 1506 * u16 *data, -- data to receive 1507 * u32 flags) -- special device flags 1508 * 1509 * Read one 16-bit register or memory location. The data received back is 1510 * converted back to the target platform's endianness. 1511 * 1512 * Output: 1513 * - 0 if reading was successful 1514 * in that case: read data is at *data 1515 * - -EIO if anything went wrong 1516 * 1517 ******************************/ 1518 1519 static int drxdap_fasi_read_reg16(struct i2c_device_addr *dev_addr, 1520 u32 addr, 1521 u16 *data, u32 flags) 1522 { 1523 u8 buf[sizeof(*data)]; 1524 int rc; 1525 1526 if (!data) 1527 return -EINVAL; 1528 1529 rc = drxdap_fasi_read_block(dev_addr, addr, sizeof(*data), buf, flags); 1530 *data = buf[0] + (((u16) buf[1]) << 8); 1531 return rc; 1532 } 1533 1534 /***************************** 1535 * 1536 * int drxdap_fasi_read_reg32 ( 1537 * struct i2c_device_addr *dev_addr, -- address of I2C device 1538 * u32 addr, -- address of chip register/memory 1539 * u32 *data, -- data to receive 1540 * u32 flags) -- special device flags 1541 * 1542 * Read one 32-bit register or memory location. The data received back is 1543 * converted back to the target platform's endianness. 1544 * 1545 * Output: 1546 * - 0 if reading was successful 1547 * in that case: read data is at *data 1548 * - -EIO if anything went wrong 1549 * 1550 ******************************/ 1551 1552 static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr, 1553 u32 addr, 1554 u32 *data, u32 flags) 1555 { 1556 u8 buf[sizeof(*data)]; 1557 int rc; 1558 1559 if (!data) 1560 return -EINVAL; 1561 1562 rc = drxdap_fasi_read_block(dev_addr, addr, sizeof(*data), buf, flags); 1563 *data = (((u32) buf[0]) << 0) + 1564 (((u32) buf[1]) << 8) + 1565 (((u32) buf[2]) << 16) + (((u32) buf[3]) << 24); 1566 return rc; 1567 } 1568 1569 /***************************** 1570 * 1571 * int drxdap_fasi_write_block ( 1572 * struct i2c_device_addr *dev_addr, -- address of I2C device 1573 * u32 addr, -- address of chip register/memory 1574 * u16 datasize, -- number of bytes to read 1575 * u8 *data, -- data to receive 1576 * u32 flags) -- special device flags 1577 * 1578 * Write block data to chip address. Because the chip is word oriented, 1579 * the number of bytes to write must be even. 1580 * 1581 * Although this function expects an even number of bytes, it is still byte 1582 * oriented, and the data being written is NOT translated from the endianness of 1583 * the target platform. 1584 * 1585 * Output: 1586 * - 0 if writing was successful 1587 * - -EIO if anything went wrong 1588 * 1589 ******************************/ 1590 1591 static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr, 1592 u32 addr, 1593 u16 datasize, 1594 u8 *data, u32 flags) 1595 { 1596 u8 buf[DRXDAP_MAX_WCHUNKSIZE]; 1597 int st = -EIO; 1598 int first_err = 0; 1599 u16 overhead_size = 0; 1600 u16 block_size = 0; 1601 1602 /* Check parameters ******************************************************* */ 1603 if (dev_addr == NULL) 1604 return -EINVAL; 1605 1606 overhead_size = (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1) + 1607 (DRXDAP_FASI_LONG_FORMAT(addr) ? 4 : 2); 1608 1609 if ((DRXDAP_FASI_OFFSET_TOO_LARGE(addr)) || 1610 ((!(DRXDAPFASI_LONG_ADDR_ALLOWED)) && 1611 DRXDAP_FASI_LONG_FORMAT(addr)) || 1612 (overhead_size > (DRXDAP_MAX_WCHUNKSIZE)) || 1613 ((datasize != 0) && (data == NULL)) || ((datasize & 1) == 1)) 1614 return -EINVAL; 1615 1616 flags &= DRXDAP_FASI_FLAGS; 1617 flags &= ~DRXDAP_FASI_MODEFLAGS; 1618 #if DRXDAP_SINGLE_MASTER 1619 flags |= DRXDAP_FASI_SINGLE_MASTER; 1620 #endif 1621 1622 /* Write block to I2C ***************************************************** */ 1623 block_size = ((DRXDAP_MAX_WCHUNKSIZE) - overhead_size) & ~1; 1624 do { 1625 u16 todo = 0; 1626 u16 bufx = 0; 1627 1628 /* Buffer device address */ 1629 addr &= ~DRXDAP_FASI_FLAGS; 1630 addr |= flags; 1631 #if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)) 1632 /* short format address preferred but long format otherwise */ 1633 if (DRXDAP_FASI_LONG_FORMAT(addr)) { 1634 #endif 1635 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) 1636 buf[bufx++] = (u8) (((addr << 1) & 0xFF) | 0x01); 1637 buf[bufx++] = (u8) ((addr >> 16) & 0xFF); 1638 buf[bufx++] = (u8) ((addr >> 24) & 0xFF); 1639 buf[bufx++] = (u8) ((addr >> 7) & 0xFF); 1640 #endif 1641 #if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)) 1642 } else { 1643 #endif 1644 #if ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1) 1645 buf[bufx++] = (u8) ((addr << 1) & 0xFF); 1646 buf[bufx++] = 1647 (u8) (((addr >> 16) & 0x0F) | 1648 ((addr >> 18) & 0xF0)); 1649 #endif 1650 #if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)) 1651 } 1652 #endif 1653 1654 /* 1655 In single master mode block_size can be 0. In such a case this I2C 1656 sequense will be visible: (1) write address {i2c addr, 1657 4 bytes chip address} (2) write data {i2c addr, 4 bytes data } 1658 (3) write address (4) write data etc... 1659 Address must be rewriten because HI is reset after data transport and 1660 expects an address. 1661 */ 1662 todo = (block_size < datasize ? block_size : datasize); 1663 if (todo == 0) { 1664 u16 overhead_size_i2c_addr = 0; 1665 u16 data_block_size = 0; 1666 1667 overhead_size_i2c_addr = 1668 (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1); 1669 data_block_size = 1670 (DRXDAP_MAX_WCHUNKSIZE - overhead_size_i2c_addr) & ~1; 1671 1672 /* write device address */ 1673 st = drxbsp_i2c_write_read(dev_addr, 1674 (u16) (bufx), 1675 buf, 1676 (struct i2c_device_addr *)(NULL), 1677 0, (u8 *)(NULL)); 1678 1679 if ((st != 0) && (first_err == 0)) { 1680 /* at the end, return the first error encountered */ 1681 first_err = st; 1682 } 1683 bufx = 0; 1684 todo = 1685 (data_block_size < 1686 datasize ? data_block_size : datasize); 1687 } 1688 memcpy(&buf[bufx], data, todo); 1689 /* write (address if can do and) data */ 1690 st = drxbsp_i2c_write_read(dev_addr, 1691 (u16) (bufx + todo), 1692 buf, 1693 (struct i2c_device_addr *)(NULL), 1694 0, (u8 *)(NULL)); 1695 1696 if ((st != 0) && (first_err == 0)) { 1697 /* at the end, return the first error encountered */ 1698 first_err = st; 1699 } 1700 datasize -= todo; 1701 data += todo; 1702 addr += (todo >> 1); 1703 } while (datasize); 1704 1705 return first_err; 1706 } 1707 1708 /***************************** 1709 * 1710 * int drxdap_fasi_write_reg16 ( 1711 * struct i2c_device_addr *dev_addr, -- address of I2C device 1712 * u32 addr, -- address of chip register/memory 1713 * u16 data, -- data to send 1714 * u32 flags) -- special device flags 1715 * 1716 * Write one 16-bit register or memory location. The data being written is 1717 * converted from the target platform's endianness to little endian. 1718 * 1719 * Output: 1720 * - 0 if writing was successful 1721 * - -EIO if anything went wrong 1722 * 1723 ******************************/ 1724 1725 static int drxdap_fasi_write_reg16(struct i2c_device_addr *dev_addr, 1726 u32 addr, 1727 u16 data, u32 flags) 1728 { 1729 u8 buf[sizeof(data)]; 1730 1731 buf[0] = (u8) ((data >> 0) & 0xFF); 1732 buf[1] = (u8) ((data >> 8) & 0xFF); 1733 1734 return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags); 1735 } 1736 1737 /***************************** 1738 * 1739 * int drxdap_fasi_read_modify_write_reg16 ( 1740 * struct i2c_device_addr *dev_addr, -- address of I2C device 1741 * u32 waddr, -- address of chip register/memory 1742 * u32 raddr, -- chip address to read back from 1743 * u16 wdata, -- data to send 1744 * u16 *rdata) -- data to receive back 1745 * 1746 * Write 16-bit data, then read back the original contents of that location. 1747 * Requires long addressing format to be allowed. 1748 * 1749 * Before sending data, the data is converted to little endian. The 1750 * data received back is converted back to the target platform's endianness. 1751 * 1752 * WARNING: This function is only guaranteed to work if there is one 1753 * master on the I2C bus. 1754 * 1755 * Output: 1756 * - 0 if reading was successful 1757 * in that case: read back data is at *rdata 1758 * - -EIO if anything went wrong 1759 * 1760 ******************************/ 1761 1762 static int drxdap_fasi_read_modify_write_reg16(struct i2c_device_addr *dev_addr, 1763 u32 waddr, 1764 u32 raddr, 1765 u16 wdata, u16 *rdata) 1766 { 1767 int rc = -EIO; 1768 1769 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1) 1770 if (rdata == NULL) 1771 return -EINVAL; 1772 1773 rc = drxdap_fasi_write_reg16(dev_addr, waddr, wdata, DRXDAP_FASI_RMW); 1774 if (rc == 0) 1775 rc = drxdap_fasi_read_reg16(dev_addr, raddr, rdata, 0); 1776 #endif 1777 1778 return rc; 1779 } 1780 1781 /***************************** 1782 * 1783 * int drxdap_fasi_write_reg32 ( 1784 * struct i2c_device_addr *dev_addr, -- address of I2C device 1785 * u32 addr, -- address of chip register/memory 1786 * u32 data, -- data to send 1787 * u32 flags) -- special device flags 1788 * 1789 * Write one 32-bit register or memory location. The data being written is 1790 * converted from the target platform's endianness to little endian. 1791 * 1792 * Output: 1793 * - 0 if writing was successful 1794 * - -EIO if anything went wrong 1795 * 1796 ******************************/ 1797 1798 static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr, 1799 u32 addr, 1800 u32 data, u32 flags) 1801 { 1802 u8 buf[sizeof(data)]; 1803 1804 buf[0] = (u8) ((data >> 0) & 0xFF); 1805 buf[1] = (u8) ((data >> 8) & 0xFF); 1806 buf[2] = (u8) ((data >> 16) & 0xFF); 1807 buf[3] = (u8) ((data >> 24) & 0xFF); 1808 1809 return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags); 1810 } 1811 1812 /*============================================================================*/ 1813 1814 /* 1815 * \fn int drxj_dap_rm_write_reg16short 1816 * \brief Read modify write 16 bits audio register using short format only. 1817 * \param dev_addr 1818 * \param waddr Address to write to 1819 * \param raddr Address to read from (usually SIO_HI_RA_RAM_S0_RMWBUF__A) 1820 * \param wdata Data to write 1821 * \param rdata Buffer for data to read 1822 * \return int 1823 * \retval 0 Succes 1824 * \retval -EIO Timeout, I2C error, illegal bank 1825 * 1826 * 16 bits register read modify write access using short addressing format only. 1827 * Requires knowledge of the registermap, thus device dependent. 1828 * Using DAP FASI directly to avoid endless recursion of RMWs to audio registers. 1829 * 1830 */ 1831 1832 /* TODO correct define should be #if ( DRXDAPFASI_SHORT_ADDR_ALLOWED==1 ) 1833 See comments drxj_dap_read_modify_write_reg16 */ 1834 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 0) 1835 static int drxj_dap_rm_write_reg16short(struct i2c_device_addr *dev_addr, 1836 u32 waddr, 1837 u32 raddr, 1838 u16 wdata, u16 *rdata) 1839 { 1840 int rc; 1841 1842 if (rdata == NULL) 1843 return -EINVAL; 1844 1845 /* Set RMW flag */ 1846 rc = drxdap_fasi_write_reg16(dev_addr, 1847 SIO_HI_RA_RAM_S0_FLG_ACC__A, 1848 SIO_HI_RA_RAM_S0_FLG_ACC_S0_RWM__M, 1849 0x0000); 1850 if (rc == 0) { 1851 /* Write new data: triggers RMW */ 1852 rc = drxdap_fasi_write_reg16(dev_addr, waddr, wdata, 1853 0x0000); 1854 } 1855 if (rc == 0) { 1856 /* Read old data */ 1857 rc = drxdap_fasi_read_reg16(dev_addr, raddr, rdata, 1858 0x0000); 1859 } 1860 if (rc == 0) { 1861 /* Reset RMW flag */ 1862 rc = drxdap_fasi_write_reg16(dev_addr, 1863 SIO_HI_RA_RAM_S0_FLG_ACC__A, 1864 0, 0x0000); 1865 } 1866 1867 return rc; 1868 } 1869 #endif 1870 1871 /*============================================================================*/ 1872 1873 static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr, 1874 u32 waddr, 1875 u32 raddr, 1876 u16 wdata, u16 *rdata) 1877 { 1878 /* TODO: correct short/long addressing format decision, 1879 now long format has higher prio then short because short also 1880 needs virt bnks (not impl yet) for certain audio registers */ 1881 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1) 1882 return drxdap_fasi_read_modify_write_reg16(dev_addr, 1883 waddr, 1884 raddr, wdata, rdata); 1885 #else 1886 return drxj_dap_rm_write_reg16short(dev_addr, waddr, raddr, wdata, rdata); 1887 #endif 1888 } 1889 1890 1891 /*============================================================================*/ 1892 1893 /* 1894 * \fn int drxj_dap_read_aud_reg16 1895 * \brief Read 16 bits audio register 1896 * \param dev_addr 1897 * \param addr 1898 * \param data 1899 * \return int 1900 * \retval 0 Succes 1901 * \retval -EIO Timeout, I2C error, illegal bank 1902 * 1903 * 16 bits register read access via audio token ring interface. 1904 * 1905 */ 1906 static int drxj_dap_read_aud_reg16(struct i2c_device_addr *dev_addr, 1907 u32 addr, u16 *data) 1908 { 1909 u32 start_timer = 0; 1910 u32 current_timer = 0; 1911 u32 delta_timer = 0; 1912 u16 tr_status = 0; 1913 int stat = -EIO; 1914 1915 /* No read possible for bank 3, return with error */ 1916 if (DRXDAP_FASI_ADDR2BANK(addr) == 3) { 1917 stat = -EINVAL; 1918 } else { 1919 const u32 write_bit = ((dr_xaddr_t) 1) << 16; 1920 1921 /* Force reset write bit */ 1922 addr &= (~write_bit); 1923 1924 /* Set up read */ 1925 start_timer = jiffies_to_msecs(jiffies); 1926 do { 1927 /* RMW to aud TR IF until request is granted or timeout */ 1928 stat = drxj_dap_read_modify_write_reg16(dev_addr, 1929 addr, 1930 SIO_HI_RA_RAM_S0_RMWBUF__A, 1931 0x0000, &tr_status); 1932 1933 if (stat != 0) 1934 break; 1935 1936 current_timer = jiffies_to_msecs(jiffies); 1937 delta_timer = current_timer - start_timer; 1938 if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) { 1939 stat = -EIO; 1940 break; 1941 } 1942 1943 } while (((tr_status & AUD_TOP_TR_CTR_FIFO_LOCK__M) == 1944 AUD_TOP_TR_CTR_FIFO_LOCK_LOCKED) || 1945 ((tr_status & AUD_TOP_TR_CTR_FIFO_FULL__M) == 1946 AUD_TOP_TR_CTR_FIFO_FULL_FULL)); 1947 } /* if ( DRXDAP_FASI_ADDR2BANK(addr)!=3 ) */ 1948 1949 /* Wait for read ready status or timeout */ 1950 if (stat == 0) { 1951 start_timer = jiffies_to_msecs(jiffies); 1952 1953 while ((tr_status & AUD_TOP_TR_CTR_FIFO_RD_RDY__M) != 1954 AUD_TOP_TR_CTR_FIFO_RD_RDY_READY) { 1955 stat = drxj_dap_read_reg16(dev_addr, 1956 AUD_TOP_TR_CTR__A, 1957 &tr_status, 0x0000); 1958 if (stat != 0) 1959 break; 1960 1961 current_timer = jiffies_to_msecs(jiffies); 1962 delta_timer = current_timer - start_timer; 1963 if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) { 1964 stat = -EIO; 1965 break; 1966 } 1967 } /* while ( ... ) */ 1968 } 1969 1970 /* Read value */ 1971 if (stat == 0) 1972 stat = drxj_dap_read_modify_write_reg16(dev_addr, 1973 AUD_TOP_TR_RD_REG__A, 1974 SIO_HI_RA_RAM_S0_RMWBUF__A, 1975 0x0000, data); 1976 return stat; 1977 } 1978 1979 /*============================================================================*/ 1980 1981 static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr, 1982 u32 addr, 1983 u16 *data, u32 flags) 1984 { 1985 int stat = -EIO; 1986 1987 /* Check param */ 1988 if ((dev_addr == NULL) || (data == NULL)) 1989 return -EINVAL; 1990 1991 if (is_handled_by_aud_tr_if(addr)) 1992 stat = drxj_dap_read_aud_reg16(dev_addr, addr, data); 1993 else 1994 stat = drxdap_fasi_read_reg16(dev_addr, addr, data, flags); 1995 1996 return stat; 1997 } 1998 /*============================================================================*/ 1999 2000 /* 2001 * \fn int drxj_dap_write_aud_reg16 2002 * \brief Write 16 bits audio register 2003 * \param dev_addr 2004 * \param addr 2005 * \param data 2006 * \return int 2007 * \retval 0 Succes 2008 * \retval -EIO Timeout, I2C error, illegal bank 2009 * 2010 * 16 bits register write access via audio token ring interface. 2011 * 2012 */ 2013 static int drxj_dap_write_aud_reg16(struct i2c_device_addr *dev_addr, 2014 u32 addr, u16 data) 2015 { 2016 int stat = -EIO; 2017 2018 /* No write possible for bank 2, return with error */ 2019 if (DRXDAP_FASI_ADDR2BANK(addr) == 2) { 2020 stat = -EINVAL; 2021 } else { 2022 u32 start_timer = 0; 2023 u32 current_timer = 0; 2024 u32 delta_timer = 0; 2025 u16 tr_status = 0; 2026 const u32 write_bit = ((dr_xaddr_t) 1) << 16; 2027 2028 /* Force write bit */ 2029 addr |= write_bit; 2030 start_timer = jiffies_to_msecs(jiffies); 2031 do { 2032 /* RMW to aud TR IF until request is granted or timeout */ 2033 stat = drxj_dap_read_modify_write_reg16(dev_addr, 2034 addr, 2035 SIO_HI_RA_RAM_S0_RMWBUF__A, 2036 data, &tr_status); 2037 if (stat != 0) 2038 break; 2039 2040 current_timer = jiffies_to_msecs(jiffies); 2041 delta_timer = current_timer - start_timer; 2042 if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) { 2043 stat = -EIO; 2044 break; 2045 } 2046 2047 } while (((tr_status & AUD_TOP_TR_CTR_FIFO_LOCK__M) == 2048 AUD_TOP_TR_CTR_FIFO_LOCK_LOCKED) || 2049 ((tr_status & AUD_TOP_TR_CTR_FIFO_FULL__M) == 2050 AUD_TOP_TR_CTR_FIFO_FULL_FULL)); 2051 2052 } /* if ( DRXDAP_FASI_ADDR2BANK(addr)!=2 ) */ 2053 2054 return stat; 2055 } 2056 2057 /*============================================================================*/ 2058 2059 static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr, 2060 u32 addr, 2061 u16 data, u32 flags) 2062 { 2063 int stat = -EIO; 2064 2065 /* Check param */ 2066 if (dev_addr == NULL) 2067 return -EINVAL; 2068 2069 if (is_handled_by_aud_tr_if(addr)) 2070 stat = drxj_dap_write_aud_reg16(dev_addr, addr, data); 2071 else 2072 stat = drxdap_fasi_write_reg16(dev_addr, 2073 addr, data, flags); 2074 2075 return stat; 2076 } 2077 2078 /*============================================================================*/ 2079 2080 /* Free data ram in SIO HI */ 2081 #define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 2082 #define SIO_HI_RA_RAM_USR_END__A 0x420060 2083 2084 #define DRXJ_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) 2085 #define DRXJ_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) 2086 #define DRXJ_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ 2087 #define DRXJ_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE 2088 2089 /* 2090 * \fn int drxj_dap_atomic_read_write_block() 2091 * \brief Basic access routine for atomic read or write access 2092 * \param dev_addr pointer to i2c dev address 2093 * \param addr destination/source address 2094 * \param datasize size of data buffer in bytes 2095 * \param data pointer to data buffer 2096 * \return int 2097 * \retval 0 Succes 2098 * \retval -EIO Timeout, I2C error, illegal bank 2099 * 2100 */ 2101 static 2102 int drxj_dap_atomic_read_write_block(struct i2c_device_addr *dev_addr, 2103 u32 addr, 2104 u16 datasize, 2105 u8 *data, bool read_flag) 2106 { 2107 struct drxj_hi_cmd hi_cmd; 2108 int rc; 2109 u16 word; 2110 u16 dummy = 0; 2111 u16 i = 0; 2112 2113 /* Parameter check */ 2114 if (!data || !dev_addr || ((datasize % 2)) || ((datasize / 2) > 8)) 2115 return -EINVAL; 2116 2117 /* Set up HI parameters to read or write n bytes */ 2118 hi_cmd.cmd = SIO_HI_RA_RAM_CMD_ATOMIC_COPY; 2119 hi_cmd.param1 = 2120 (u16) ((DRXDAP_FASI_ADDR2BLOCK(DRXJ_HI_ATOMIC_BUF_START) << 6) + 2121 DRXDAP_FASI_ADDR2BANK(DRXJ_HI_ATOMIC_BUF_START)); 2122 hi_cmd.param2 = 2123 (u16) DRXDAP_FASI_ADDR2OFFSET(DRXJ_HI_ATOMIC_BUF_START); 2124 hi_cmd.param3 = (u16) ((datasize / 2) - 1); 2125 if (!read_flag) 2126 hi_cmd.param3 |= DRXJ_HI_ATOMIC_WRITE; 2127 else 2128 hi_cmd.param3 |= DRXJ_HI_ATOMIC_READ; 2129 hi_cmd.param4 = (u16) ((DRXDAP_FASI_ADDR2BLOCK(addr) << 6) + 2130 DRXDAP_FASI_ADDR2BANK(addr)); 2131 hi_cmd.param5 = (u16) DRXDAP_FASI_ADDR2OFFSET(addr); 2132 2133 if (!read_flag) { 2134 /* write data to buffer */ 2135 for (i = 0; i < (datasize / 2); i++) { 2136 2137 word = ((u16) data[2 * i]); 2138 word += (((u16) data[(2 * i) + 1]) << 8); 2139 drxj_dap_write_reg16(dev_addr, 2140 (DRXJ_HI_ATOMIC_BUF_START + i), 2141 word, 0); 2142 } 2143 } 2144 2145 rc = hi_command(dev_addr, &hi_cmd, &dummy); 2146 if (rc != 0) { 2147 pr_err("error %d\n", rc); 2148 goto rw_error; 2149 } 2150 2151 if (read_flag) { 2152 /* read data from buffer */ 2153 for (i = 0; i < (datasize / 2); i++) { 2154 rc = drxj_dap_read_reg16(dev_addr, 2155 (DRXJ_HI_ATOMIC_BUF_START + i), 2156 &word, 0); 2157 if (rc) { 2158 pr_err("error %d\n", rc); 2159 goto rw_error; 2160 } 2161 data[2 * i] = (u8) (word & 0xFF); 2162 data[(2 * i) + 1] = (u8) (word >> 8); 2163 } 2164 } 2165 2166 return 0; 2167 2168 rw_error: 2169 return rc; 2170 2171 } 2172 2173 /*============================================================================*/ 2174 2175 /* 2176 * \fn int drxj_dap_atomic_read_reg32() 2177 * \brief Atomic read of 32 bits words 2178 */ 2179 static 2180 int drxj_dap_atomic_read_reg32(struct i2c_device_addr *dev_addr, 2181 u32 addr, 2182 u32 *data, u32 flags) 2183 { 2184 u8 buf[sizeof(*data)] = { 0 }; 2185 int rc = -EIO; 2186 u32 word = 0; 2187 2188 if (!data) 2189 return -EINVAL; 2190 2191 rc = drxj_dap_atomic_read_write_block(dev_addr, addr, 2192 sizeof(*data), buf, true); 2193 2194 if (rc < 0) 2195 return 0; 2196 2197 word = (u32) buf[3]; 2198 word <<= 8; 2199 word |= (u32) buf[2]; 2200 word <<= 8; 2201 word |= (u32) buf[1]; 2202 word <<= 8; 2203 word |= (u32) buf[0]; 2204 2205 *data = word; 2206 2207 return rc; 2208 } 2209 2210 /*============================================================================*/ 2211 2212 /*============================================================================*/ 2213 /*== END DRXJ DAP FUNCTIONS ==*/ 2214 /*============================================================================*/ 2215 2216 /*============================================================================*/ 2217 /*============================================================================*/ 2218 /*== HOST INTERFACE FUNCTIONS ==*/ 2219 /*============================================================================*/ 2220 /*============================================================================*/ 2221 2222 /* 2223 * \fn int hi_cfg_command() 2224 * \brief Configure HI with settings stored in the demod structure. 2225 * \param demod Demodulator. 2226 * \return int. 2227 * 2228 * This routine was created because to much orthogonal settings have 2229 * been put into one HI API function (configure). Especially the I2C bridge 2230 * enable/disable should not need re-configuration of the HI. 2231 * 2232 */ 2233 static int hi_cfg_command(const struct drx_demod_instance *demod) 2234 { 2235 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 2236 struct drxj_hi_cmd hi_cmd; 2237 u16 result = 0; 2238 int rc; 2239 2240 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2241 2242 hi_cmd.cmd = SIO_HI_RA_RAM_CMD_CONFIG; 2243 hi_cmd.param1 = SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY; 2244 hi_cmd.param2 = ext_attr->hi_cfg_timing_div; 2245 hi_cmd.param3 = ext_attr->hi_cfg_bridge_delay; 2246 hi_cmd.param4 = ext_attr->hi_cfg_wake_up_key; 2247 hi_cmd.param5 = ext_attr->hi_cfg_ctrl; 2248 hi_cmd.param6 = ext_attr->hi_cfg_transmit; 2249 2250 rc = hi_command(demod->my_i2c_dev_addr, &hi_cmd, &result); 2251 if (rc != 0) { 2252 pr_err("error %d\n", rc); 2253 goto rw_error; 2254 } 2255 2256 /* Reset power down flag (set one call only) */ 2257 ext_attr->hi_cfg_ctrl &= (~(SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ)); 2258 2259 return 0; 2260 2261 rw_error: 2262 return rc; 2263 } 2264 2265 /* 2266 * \fn int hi_command() 2267 * \brief Configure HI with settings stored in the demod structure. 2268 * \param dev_addr I2C address. 2269 * \param cmd HI command. 2270 * \param result HI command result. 2271 * \return int. 2272 * 2273 * Sends command to HI 2274 * 2275 */ 2276 static int 2277 hi_command(struct i2c_device_addr *dev_addr, const struct drxj_hi_cmd *cmd, u16 *result) 2278 { 2279 u16 wait_cmd = 0; 2280 u16 nr_retries = 0; 2281 bool powerdown_cmd = false; 2282 int rc; 2283 2284 /* Write parameters */ 2285 switch (cmd->cmd) { 2286 2287 case SIO_HI_RA_RAM_CMD_CONFIG: 2288 case SIO_HI_RA_RAM_CMD_ATOMIC_COPY: 2289 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_6__A, cmd->param6, 0); 2290 if (rc != 0) { 2291 pr_err("error %d\n", rc); 2292 goto rw_error; 2293 } 2294 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_5__A, cmd->param5, 0); 2295 if (rc != 0) { 2296 pr_err("error %d\n", rc); 2297 goto rw_error; 2298 } 2299 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_4__A, cmd->param4, 0); 2300 if (rc != 0) { 2301 pr_err("error %d\n", rc); 2302 goto rw_error; 2303 } 2304 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_3__A, cmd->param3, 0); 2305 if (rc != 0) { 2306 pr_err("error %d\n", rc); 2307 goto rw_error; 2308 } 2309 /* fallthrough */ 2310 case SIO_HI_RA_RAM_CMD_BRDCTRL: 2311 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_2__A, cmd->param2, 0); 2312 if (rc != 0) { 2313 pr_err("error %d\n", rc); 2314 goto rw_error; 2315 } 2316 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_1__A, cmd->param1, 0); 2317 if (rc != 0) { 2318 pr_err("error %d\n", rc); 2319 goto rw_error; 2320 } 2321 /* fallthrough */ 2322 case SIO_HI_RA_RAM_CMD_NULL: 2323 /* No parameters */ 2324 break; 2325 2326 default: 2327 return -EINVAL; 2328 break; 2329 } 2330 2331 /* Write command */ 2332 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_CMD__A, cmd->cmd, 0); 2333 if (rc != 0) { 2334 pr_err("error %d\n", rc); 2335 goto rw_error; 2336 } 2337 2338 if ((cmd->cmd) == SIO_HI_RA_RAM_CMD_RESET) 2339 msleep(1); 2340 2341 /* Detect power down to ommit reading result */ 2342 powerdown_cmd = (bool) ((cmd->cmd == SIO_HI_RA_RAM_CMD_CONFIG) && 2343 (((cmd-> 2344 param5) & SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) 2345 == SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ)); 2346 if (!powerdown_cmd) { 2347 /* Wait until command rdy */ 2348 do { 2349 nr_retries++; 2350 if (nr_retries > DRXJ_MAX_RETRIES) { 2351 pr_err("timeout\n"); 2352 goto rw_error; 2353 } 2354 2355 rc = drxj_dap_read_reg16(dev_addr, SIO_HI_RA_RAM_CMD__A, &wait_cmd, 0); 2356 if (rc != 0) { 2357 pr_err("error %d\n", rc); 2358 goto rw_error; 2359 } 2360 } while (wait_cmd != 0); 2361 2362 /* Read result */ 2363 rc = drxj_dap_read_reg16(dev_addr, SIO_HI_RA_RAM_RES__A, result, 0); 2364 if (rc != 0) { 2365 pr_err("error %d\n", rc); 2366 goto rw_error; 2367 } 2368 2369 } 2370 /* if ( powerdown_cmd == true ) */ 2371 return 0; 2372 rw_error: 2373 return rc; 2374 } 2375 2376 /* 2377 * \fn int init_hi( const struct drx_demod_instance *demod ) 2378 * \brief Initialise and configurate HI. 2379 * \param demod pointer to demod data. 2380 * \return int Return status. 2381 * \retval 0 Success. 2382 * \retval -EIO Failure. 2383 * 2384 * Needs to know Psys (System Clock period) and Posc (Osc Clock period) 2385 * Need to store configuration in driver because of the way I2C 2386 * bridging is controlled. 2387 * 2388 */ 2389 static int init_hi(const struct drx_demod_instance *demod) 2390 { 2391 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 2392 struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL); 2393 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2394 int rc; 2395 2396 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2397 common_attr = (struct drx_common_attr *) demod->my_common_attr; 2398 dev_addr = demod->my_i2c_dev_addr; 2399 2400 /* PATCH for bug 5003, HI ucode v3.1.0 */ 2401 rc = drxj_dap_write_reg16(dev_addr, 0x4301D7, 0x801, 0); 2402 if (rc != 0) { 2403 pr_err("error %d\n", rc); 2404 goto rw_error; 2405 } 2406 2407 /* Timing div, 250ns/Psys */ 2408 /* Timing div, = ( delay (nano seconds) * sysclk (kHz) )/ 1000 */ 2409 ext_attr->hi_cfg_timing_div = 2410 (u16) ((common_attr->sys_clock_freq / 1000) * HI_I2C_DELAY) / 1000; 2411 /* Clipping */ 2412 if ((ext_attr->hi_cfg_timing_div) > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) 2413 ext_attr->hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; 2414 /* Bridge delay, uses oscilator clock */ 2415 /* Delay = ( delay (nano seconds) * oscclk (kHz) )/ 1000 */ 2416 /* SDA brdige delay */ 2417 ext_attr->hi_cfg_bridge_delay = 2418 (u16) ((common_attr->osc_clock_freq / 1000) * HI_I2C_BRIDGE_DELAY) / 2419 1000; 2420 /* Clipping */ 2421 if ((ext_attr->hi_cfg_bridge_delay) > SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) 2422 ext_attr->hi_cfg_bridge_delay = SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M; 2423 /* SCL bridge delay, same as SDA for now */ 2424 ext_attr->hi_cfg_bridge_delay += ((ext_attr->hi_cfg_bridge_delay) << 2425 SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B); 2426 /* Wakeup key, setting the read flag (as suggest in the documentation) does 2427 not always result into a working solution (barebones worked VI2C failed). 2428 Not setting the bit works in all cases . */ 2429 ext_attr->hi_cfg_wake_up_key = DRXJ_WAKE_UP_KEY; 2430 /* port/bridge/power down ctrl */ 2431 ext_attr->hi_cfg_ctrl = (SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE); 2432 /* transit mode time out delay and watch dog divider */ 2433 ext_attr->hi_cfg_transmit = SIO_HI_RA_RAM_PAR_6__PRE; 2434 2435 rc = hi_cfg_command(demod); 2436 if (rc != 0) { 2437 pr_err("error %d\n", rc); 2438 goto rw_error; 2439 } 2440 2441 return 0; 2442 2443 rw_error: 2444 return rc; 2445 } 2446 2447 /*============================================================================*/ 2448 /*== END HOST INTERFACE FUNCTIONS ==*/ 2449 /*============================================================================*/ 2450 2451 /*============================================================================*/ 2452 /*============================================================================*/ 2453 /*== AUXILIARY FUNCTIONS ==*/ 2454 /*============================================================================*/ 2455 /*============================================================================*/ 2456 2457 /* 2458 * \fn int get_device_capabilities() 2459 * \brief Get and store device capabilities. 2460 * \param demod Pointer to demodulator instance. 2461 * \return int. 2462 * \return 0 Success 2463 * \retval -EIO Failure 2464 * 2465 * Depending on pulldowns on MDx pins the following internals are set: 2466 * * common_attr->osc_clock_freq 2467 * * ext_attr->has_lna 2468 * * ext_attr->has_ntsc 2469 * * ext_attr->has_btsc 2470 * * ext_attr->has_oob 2471 * 2472 */ 2473 static int get_device_capabilities(struct drx_demod_instance *demod) 2474 { 2475 struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL); 2476 struct drxj_data *ext_attr = (struct drxj_data *) NULL; 2477 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2478 u16 sio_pdr_ohw_cfg = 0; 2479 u32 sio_top_jtagid_lo = 0; 2480 u16 bid = 0; 2481 int rc; 2482 2483 common_attr = (struct drx_common_attr *) demod->my_common_attr; 2484 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2485 dev_addr = demod->my_i2c_dev_addr; 2486 2487 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 2488 if (rc != 0) { 2489 pr_err("error %d\n", rc); 2490 goto rw_error; 2491 } 2492 rc = drxj_dap_read_reg16(dev_addr, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg, 0); 2493 if (rc != 0) { 2494 pr_err("error %d\n", rc); 2495 goto rw_error; 2496 } 2497 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY__PRE, 0); 2498 if (rc != 0) { 2499 pr_err("error %d\n", rc); 2500 goto rw_error; 2501 } 2502 2503 switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { 2504 case 0: 2505 /* ignore (bypass ?) */ 2506 break; 2507 case 1: 2508 /* 27 MHz */ 2509 common_attr->osc_clock_freq = 27000; 2510 break; 2511 case 2: 2512 /* 20.25 MHz */ 2513 common_attr->osc_clock_freq = 20250; 2514 break; 2515 case 3: 2516 /* 4 MHz */ 2517 common_attr->osc_clock_freq = 4000; 2518 break; 2519 default: 2520 return -EIO; 2521 } 2522 2523 /* 2524 Determine device capabilities 2525 Based on pinning v47 2526 */ 2527 rc = drxdap_fasi_read_reg32(dev_addr, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo, 0); 2528 if (rc != 0) { 2529 pr_err("error %d\n", rc); 2530 goto rw_error; 2531 } 2532 ext_attr->mfx = (u8) ((sio_top_jtagid_lo >> 29) & 0xF); 2533 2534 switch ((sio_top_jtagid_lo >> 12) & 0xFF) { 2535 case 0x31: 2536 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 2537 if (rc != 0) { 2538 pr_err("error %d\n", rc); 2539 goto rw_error; 2540 } 2541 rc = drxj_dap_read_reg16(dev_addr, SIO_PDR_UIO_IN_HI__A, &bid, 0); 2542 if (rc != 0) { 2543 pr_err("error %d\n", rc); 2544 goto rw_error; 2545 } 2546 bid = (bid >> 10) & 0xf; 2547 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY__PRE, 0); 2548 if (rc != 0) { 2549 pr_err("error %d\n", rc); 2550 goto rw_error; 2551 } 2552 2553 ext_attr->has_lna = true; 2554 ext_attr->has_ntsc = false; 2555 ext_attr->has_btsc = false; 2556 ext_attr->has_oob = false; 2557 ext_attr->has_smatx = true; 2558 ext_attr->has_smarx = false; 2559 ext_attr->has_gpio = false; 2560 ext_attr->has_irqn = false; 2561 break; 2562 case 0x33: 2563 ext_attr->has_lna = false; 2564 ext_attr->has_ntsc = false; 2565 ext_attr->has_btsc = false; 2566 ext_attr->has_oob = false; 2567 ext_attr->has_smatx = true; 2568 ext_attr->has_smarx = false; 2569 ext_attr->has_gpio = false; 2570 ext_attr->has_irqn = false; 2571 break; 2572 case 0x45: 2573 ext_attr->has_lna = true; 2574 ext_attr->has_ntsc = true; 2575 ext_attr->has_btsc = false; 2576 ext_attr->has_oob = false; 2577 ext_attr->has_smatx = true; 2578 ext_attr->has_smarx = true; 2579 ext_attr->has_gpio = true; 2580 ext_attr->has_irqn = false; 2581 break; 2582 case 0x46: 2583 ext_attr->has_lna = false; 2584 ext_attr->has_ntsc = true; 2585 ext_attr->has_btsc = false; 2586 ext_attr->has_oob = false; 2587 ext_attr->has_smatx = true; 2588 ext_attr->has_smarx = true; 2589 ext_attr->has_gpio = true; 2590 ext_attr->has_irqn = false; 2591 break; 2592 case 0x41: 2593 ext_attr->has_lna = true; 2594 ext_attr->has_ntsc = true; 2595 ext_attr->has_btsc = true; 2596 ext_attr->has_oob = false; 2597 ext_attr->has_smatx = true; 2598 ext_attr->has_smarx = true; 2599 ext_attr->has_gpio = true; 2600 ext_attr->has_irqn = false; 2601 break; 2602 case 0x43: 2603 ext_attr->has_lna = false; 2604 ext_attr->has_ntsc = true; 2605 ext_attr->has_btsc = true; 2606 ext_attr->has_oob = false; 2607 ext_attr->has_smatx = true; 2608 ext_attr->has_smarx = true; 2609 ext_attr->has_gpio = true; 2610 ext_attr->has_irqn = false; 2611 break; 2612 case 0x32: 2613 ext_attr->has_lna = true; 2614 ext_attr->has_ntsc = false; 2615 ext_attr->has_btsc = false; 2616 ext_attr->has_oob = true; 2617 ext_attr->has_smatx = true; 2618 ext_attr->has_smarx = true; 2619 ext_attr->has_gpio = true; 2620 ext_attr->has_irqn = true; 2621 break; 2622 case 0x34: 2623 ext_attr->has_lna = false; 2624 ext_attr->has_ntsc = true; 2625 ext_attr->has_btsc = true; 2626 ext_attr->has_oob = true; 2627 ext_attr->has_smatx = true; 2628 ext_attr->has_smarx = true; 2629 ext_attr->has_gpio = true; 2630 ext_attr->has_irqn = true; 2631 break; 2632 case 0x42: 2633 ext_attr->has_lna = true; 2634 ext_attr->has_ntsc = true; 2635 ext_attr->has_btsc = true; 2636 ext_attr->has_oob = true; 2637 ext_attr->has_smatx = true; 2638 ext_attr->has_smarx = true; 2639 ext_attr->has_gpio = true; 2640 ext_attr->has_irqn = true; 2641 break; 2642 case 0x44: 2643 ext_attr->has_lna = false; 2644 ext_attr->has_ntsc = true; 2645 ext_attr->has_btsc = true; 2646 ext_attr->has_oob = true; 2647 ext_attr->has_smatx = true; 2648 ext_attr->has_smarx = true; 2649 ext_attr->has_gpio = true; 2650 ext_attr->has_irqn = true; 2651 break; 2652 default: 2653 /* Unknown device variant */ 2654 return -EIO; 2655 break; 2656 } 2657 2658 return 0; 2659 rw_error: 2660 return rc; 2661 } 2662 2663 /* 2664 * \fn int power_up_device() 2665 * \brief Power up device. 2666 * \param demod Pointer to demodulator instance. 2667 * \return int. 2668 * \return 0 Success 2669 * \retval -EIO Failure, I2C or max retries reached 2670 * 2671 */ 2672 2673 #ifndef DRXJ_MAX_RETRIES_POWERUP 2674 #define DRXJ_MAX_RETRIES_POWERUP 10 2675 #endif 2676 2677 static int power_up_device(struct drx_demod_instance *demod) 2678 { 2679 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2680 u8 data = 0; 2681 u16 retry_count = 0; 2682 struct i2c_device_addr wake_up_addr; 2683 2684 dev_addr = demod->my_i2c_dev_addr; 2685 wake_up_addr.i2c_addr = DRXJ_WAKE_UP_KEY; 2686 wake_up_addr.i2c_dev_id = dev_addr->i2c_dev_id; 2687 wake_up_addr.user_data = dev_addr->user_data; 2688 /* 2689 * I2C access may fail in this case: no ack 2690 * dummy write must be used to wake uop device, dummy read must be used to 2691 * reset HI state machine (avoiding actual writes) 2692 */ 2693 do { 2694 data = 0; 2695 drxbsp_i2c_write_read(&wake_up_addr, 1, &data, 2696 (struct i2c_device_addr *)(NULL), 0, 2697 (u8 *)(NULL)); 2698 msleep(10); 2699 retry_count++; 2700 } while ((drxbsp_i2c_write_read 2701 ((struct i2c_device_addr *) (NULL), 0, (u8 *)(NULL), dev_addr, 1, 2702 &data) 2703 != 0) && (retry_count < DRXJ_MAX_RETRIES_POWERUP)); 2704 2705 /* Need some recovery time .... */ 2706 msleep(10); 2707 2708 if (retry_count == DRXJ_MAX_RETRIES_POWERUP) 2709 return -EIO; 2710 2711 return 0; 2712 } 2713 2714 /*----------------------------------------------------------------------------*/ 2715 /* MPEG Output Configuration Functions - begin */ 2716 /*----------------------------------------------------------------------------*/ 2717 /* 2718 * \fn int ctrl_set_cfg_mpeg_output() 2719 * \brief Set MPEG output configuration of the device. 2720 * \param devmod Pointer to demodulator instance. 2721 * \param cfg_data Pointer to mpeg output configuaration. 2722 * \return int. 2723 * 2724 * Configure MPEG output parameters. 2725 * 2726 */ 2727 static int 2728 ctrl_set_cfg_mpeg_output(struct drx_demod_instance *demod, struct drx_cfg_mpeg_output *cfg_data) 2729 { 2730 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2731 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 2732 struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL); 2733 int rc; 2734 u16 fec_oc_reg_mode = 0; 2735 u16 fec_oc_reg_ipr_mode = 0; 2736 u16 fec_oc_reg_ipr_invert = 0; 2737 u32 max_bit_rate = 0; 2738 u32 rcn_rate = 0; 2739 u32 nr_bits = 0; 2740 u16 sio_pdr_md_cfg = 0; 2741 /* data mask for the output data byte */ 2742 u16 invert_data_mask = 2743 FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | 2744 FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | 2745 FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | 2746 FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; 2747 2748 /* check arguments */ 2749 if ((demod == NULL) || (cfg_data == NULL)) 2750 return -EINVAL; 2751 2752 dev_addr = demod->my_i2c_dev_addr; 2753 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2754 common_attr = (struct drx_common_attr *) demod->my_common_attr; 2755 2756 if (cfg_data->enable_mpeg_output == true) { 2757 /* quick and dirty patch to set MPEG incase current std is not 2758 producing MPEG */ 2759 switch (ext_attr->standard) { 2760 case DRX_STANDARD_8VSB: 2761 case DRX_STANDARD_ITU_A: 2762 case DRX_STANDARD_ITU_B: 2763 case DRX_STANDARD_ITU_C: 2764 break; 2765 default: 2766 return 0; 2767 } 2768 2769 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_OCR_INVERT__A, 0, 0); 2770 if (rc != 0) { 2771 pr_err("error %d\n", rc); 2772 goto rw_error; 2773 } 2774 switch (ext_attr->standard) { 2775 case DRX_STANDARD_8VSB: 2776 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, 7, 0); 2777 if (rc != 0) { 2778 pr_err("error %d\n", rc); 2779 goto rw_error; 2780 } /* 2048 bytes fifo ram */ 2781 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_CTL_UPD_RATE__A, 10, 0); 2782 if (rc != 0) { 2783 pr_err("error %d\n", rc); 2784 goto rw_error; 2785 } 2786 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_INT_UPD_RATE__A, 10, 0); 2787 if (rc != 0) { 2788 pr_err("error %d\n", rc); 2789 goto rw_error; 2790 } 2791 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_A__A, 5, 0); 2792 if (rc != 0) { 2793 pr_err("error %d\n", rc); 2794 goto rw_error; 2795 } 2796 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_B__A, 7, 0); 2797 if (rc != 0) { 2798 pr_err("error %d\n", rc); 2799 goto rw_error; 2800 } 2801 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, 10, 0); 2802 if (rc != 0) { 2803 pr_err("error %d\n", rc); 2804 goto rw_error; 2805 } 2806 /* Low Water Mark for synchronization */ 2807 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_LWM__A, 3, 0); 2808 if (rc != 0) { 2809 pr_err("error %d\n", rc); 2810 goto rw_error; 2811 } 2812 /* High Water Mark for synchronization */ 2813 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_HWM__A, 5, 0); 2814 if (rc != 0) { 2815 pr_err("error %d\n", rc); 2816 goto rw_error; 2817 } 2818 break; 2819 case DRX_STANDARD_ITU_A: 2820 case DRX_STANDARD_ITU_C: 2821 switch (ext_attr->constellation) { 2822 case DRX_CONSTELLATION_QAM256: 2823 nr_bits = 8; 2824 break; 2825 case DRX_CONSTELLATION_QAM128: 2826 nr_bits = 7; 2827 break; 2828 case DRX_CONSTELLATION_QAM64: 2829 nr_bits = 6; 2830 break; 2831 case DRX_CONSTELLATION_QAM32: 2832 nr_bits = 5; 2833 break; 2834 case DRX_CONSTELLATION_QAM16: 2835 nr_bits = 4; 2836 break; 2837 default: 2838 return -EIO; 2839 } /* ext_attr->constellation */ 2840 /* max_bit_rate = symbol_rate * nr_bits * coef */ 2841 /* coef = 188/204 */ 2842 max_bit_rate = 2843 (ext_attr->curr_symbol_rate / 8) * nr_bits * 188; 2844 /* fall-through - as b/c Annex A/C need following settings */ 2845 case DRX_STANDARD_ITU_B: 2846 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, FEC_OC_FCT_USAGE__PRE, 0); 2847 if (rc != 0) { 2848 pr_err("error %d\n", rc); 2849 goto rw_error; 2850 } 2851 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_CTL_UPD_RATE__A, FEC_OC_TMD_CTL_UPD_RATE__PRE, 0); 2852 if (rc != 0) { 2853 pr_err("error %d\n", rc); 2854 goto rw_error; 2855 } 2856 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_INT_UPD_RATE__A, 5, 0); 2857 if (rc != 0) { 2858 pr_err("error %d\n", rc); 2859 goto rw_error; 2860 } 2861 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_A__A, FEC_OC_AVR_PARM_A__PRE, 0); 2862 if (rc != 0) { 2863 pr_err("error %d\n", rc); 2864 goto rw_error; 2865 } 2866 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_B__A, FEC_OC_AVR_PARM_B__PRE, 0); 2867 if (rc != 0) { 2868 pr_err("error %d\n", rc); 2869 goto rw_error; 2870 } 2871 if (cfg_data->static_clk == true) { 2872 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, 0xD, 0); 2873 if (rc != 0) { 2874 pr_err("error %d\n", rc); 2875 goto rw_error; 2876 } 2877 } else { 2878 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, FEC_OC_RCN_GAIN__PRE, 0); 2879 if (rc != 0) { 2880 pr_err("error %d\n", rc); 2881 goto rw_error; 2882 } 2883 } 2884 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_LWM__A, 2, 0); 2885 if (rc != 0) { 2886 pr_err("error %d\n", rc); 2887 goto rw_error; 2888 } 2889 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_HWM__A, 12, 0); 2890 if (rc != 0) { 2891 pr_err("error %d\n", rc); 2892 goto rw_error; 2893 } 2894 break; 2895 default: 2896 break; 2897 } /* swtich (standard) */ 2898 2899 /* Check insertion of the Reed-Solomon parity bytes */ 2900 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_MODE__A, &fec_oc_reg_mode, 0); 2901 if (rc != 0) { 2902 pr_err("error %d\n", rc); 2903 goto rw_error; 2904 } 2905 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode, 0); 2906 if (rc != 0) { 2907 pr_err("error %d\n", rc); 2908 goto rw_error; 2909 } 2910 if (cfg_data->insert_rs_byte == true) { 2911 /* enable parity symbol forward */ 2912 fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M; 2913 /* MVAL disable during parity bytes */ 2914 fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; 2915 switch (ext_attr->standard) { 2916 case DRX_STANDARD_8VSB: 2917 rcn_rate = 0x004854D3; 2918 break; 2919 case DRX_STANDARD_ITU_B: 2920 fec_oc_reg_mode |= FEC_OC_MODE_TRANSPARENT__M; 2921 switch (ext_attr->constellation) { 2922 case DRX_CONSTELLATION_QAM256: 2923 rcn_rate = 0x008945E7; 2924 break; 2925 case DRX_CONSTELLATION_QAM64: 2926 rcn_rate = 0x005F64D4; 2927 break; 2928 default: 2929 return -EIO; 2930 } 2931 break; 2932 case DRX_STANDARD_ITU_A: 2933 case DRX_STANDARD_ITU_C: 2934 /* insert_rs_byte = true -> coef = 188/188 -> 1, RS bits are in MPEG output */ 2935 rcn_rate = 2936 (frac28 2937 (max_bit_rate, 2938 (u32) (common_attr->sys_clock_freq / 8))) / 2939 188; 2940 break; 2941 default: 2942 return -EIO; 2943 } /* ext_attr->standard */ 2944 } else { /* insert_rs_byte == false */ 2945 2946 /* disable parity symbol forward */ 2947 fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M); 2948 /* MVAL enable during parity bytes */ 2949 fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); 2950 switch (ext_attr->standard) { 2951 case DRX_STANDARD_8VSB: 2952 rcn_rate = 0x0041605C; 2953 break; 2954 case DRX_STANDARD_ITU_B: 2955 fec_oc_reg_mode &= (~FEC_OC_MODE_TRANSPARENT__M); 2956 switch (ext_attr->constellation) { 2957 case DRX_CONSTELLATION_QAM256: 2958 rcn_rate = 0x0082D6A0; 2959 break; 2960 case DRX_CONSTELLATION_QAM64: 2961 rcn_rate = 0x005AEC1A; 2962 break; 2963 default: 2964 return -EIO; 2965 } 2966 break; 2967 case DRX_STANDARD_ITU_A: 2968 case DRX_STANDARD_ITU_C: 2969 /* insert_rs_byte = false -> coef = 188/204, RS bits not in MPEG output */ 2970 rcn_rate = 2971 (frac28 2972 (max_bit_rate, 2973 (u32) (common_attr->sys_clock_freq / 8))) / 2974 204; 2975 break; 2976 default: 2977 return -EIO; 2978 } /* ext_attr->standard */ 2979 } 2980 2981 if (cfg_data->enable_parallel == true) { /* MPEG data output is parallel -> clear ipr_mode[0] */ 2982 fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); 2983 } else { /* MPEG data output is serial -> set ipr_mode[0] */ 2984 fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M; 2985 } 2986 2987 /* Control slective inversion of output bits */ 2988 if (cfg_data->invert_data == true) 2989 fec_oc_reg_ipr_invert |= invert_data_mask; 2990 else 2991 fec_oc_reg_ipr_invert &= (~(invert_data_mask)); 2992 2993 if (cfg_data->invert_err == true) 2994 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M; 2995 else 2996 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M)); 2997 2998 if (cfg_data->invert_str == true) 2999 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M; 3000 else 3001 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); 3002 3003 if (cfg_data->invert_val == true) 3004 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M; 3005 else 3006 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); 3007 3008 if (cfg_data->invert_clk == true) 3009 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M; 3010 else 3011 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); 3012 3013 3014 if (cfg_data->static_clk == true) { /* Static mode */ 3015 u32 dto_rate = 0; 3016 u32 bit_rate = 0; 3017 u16 fec_oc_dto_burst_len = 0; 3018 u16 fec_oc_dto_period = 0; 3019 3020 fec_oc_dto_burst_len = FEC_OC_DTO_BURST_LEN__PRE; 3021 3022 switch (ext_attr->standard) { 3023 case DRX_STANDARD_8VSB: 3024 fec_oc_dto_period = 4; 3025 if (cfg_data->insert_rs_byte == true) 3026 fec_oc_dto_burst_len = 208; 3027 break; 3028 case DRX_STANDARD_ITU_A: 3029 { 3030 u32 symbol_rate_th = 6400000; 3031 if (cfg_data->insert_rs_byte == true) { 3032 fec_oc_dto_burst_len = 204; 3033 symbol_rate_th = 5900000; 3034 } 3035 if (ext_attr->curr_symbol_rate >= 3036 symbol_rate_th) { 3037 fec_oc_dto_period = 0; 3038 } else { 3039 fec_oc_dto_period = 1; 3040 } 3041 } 3042 break; 3043 case DRX_STANDARD_ITU_B: 3044 fec_oc_dto_period = 1; 3045 if (cfg_data->insert_rs_byte == true) 3046 fec_oc_dto_burst_len = 128; 3047 break; 3048 case DRX_STANDARD_ITU_C: 3049 fec_oc_dto_period = 1; 3050 if (cfg_data->insert_rs_byte == true) 3051 fec_oc_dto_burst_len = 204; 3052 break; 3053 default: 3054 return -EIO; 3055 } 3056 bit_rate = 3057 common_attr->sys_clock_freq * 1000 / (fec_oc_dto_period + 3058 2); 3059 dto_rate = 3060 frac28(bit_rate, common_attr->sys_clock_freq * 1000); 3061 dto_rate >>= 3; 3062 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_RATE_HI__A, (u16)((dto_rate >> 16) & FEC_OC_DTO_RATE_HI__M), 0); 3063 if (rc != 0) { 3064 pr_err("error %d\n", rc); 3065 goto rw_error; 3066 } 3067 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_RATE_LO__A, (u16)(dto_rate & FEC_OC_DTO_RATE_LO_RATE_LO__M), 0); 3068 if (rc != 0) { 3069 pr_err("error %d\n", rc); 3070 goto rw_error; 3071 } 3072 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_MODE__A, FEC_OC_DTO_MODE_DYNAMIC__M | FEC_OC_DTO_MODE_OFFSET_ENABLE__M, 0); 3073 if (rc != 0) { 3074 pr_err("error %d\n", rc); 3075 goto rw_error; 3076 } 3077 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_MODE__A, FEC_OC_FCT_MODE_RAT_ENA__M | FEC_OC_FCT_MODE_VIRT_ENA__M, 0); 3078 if (rc != 0) { 3079 pr_err("error %d\n", rc); 3080 goto rw_error; 3081 } 3082 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len, 0); 3083 if (rc != 0) { 3084 pr_err("error %d\n", rc); 3085 goto rw_error; 3086 } 3087 if (ext_attr->mpeg_output_clock_rate != DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO) 3088 fec_oc_dto_period = ext_attr->mpeg_output_clock_rate - 1; 3089 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period, 0); 3090 if (rc != 0) { 3091 pr_err("error %d\n", rc); 3092 goto rw_error; 3093 } 3094 } else { /* Dynamic mode */ 3095 3096 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_MODE__A, FEC_OC_DTO_MODE_DYNAMIC__M, 0); 3097 if (rc != 0) { 3098 pr_err("error %d\n", rc); 3099 goto rw_error; 3100 } 3101 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_MODE__A, 0, 0); 3102 if (rc != 0) { 3103 pr_err("error %d\n", rc); 3104 goto rw_error; 3105 } 3106 } 3107 3108 rc = drxdap_fasi_write_reg32(dev_addr, FEC_OC_RCN_CTL_RATE_LO__A, rcn_rate, 0); 3109 if (rc != 0) { 3110 pr_err("error %d\n", rc); 3111 goto rw_error; 3112 } 3113 3114 /* Write appropriate registers with requested configuration */ 3115 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_MODE__A, fec_oc_reg_mode, 0); 3116 if (rc != 0) { 3117 pr_err("error %d\n", rc); 3118 goto rw_error; 3119 } 3120 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode, 0); 3121 if (rc != 0) { 3122 pr_err("error %d\n", rc); 3123 goto rw_error; 3124 } 3125 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert, 0); 3126 if (rc != 0) { 3127 pr_err("error %d\n", rc); 3128 goto rw_error; 3129 } 3130 3131 /* enabling for both parallel and serial now */ 3132 /* Write magic word to enable pdr reg write */ 3133 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0); 3134 if (rc != 0) { 3135 pr_err("error %d\n", rc); 3136 goto rw_error; 3137 } 3138 /* Set MPEG TS pads to outputmode */ 3139 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MSTRT_CFG__A, 0x0013, 0); 3140 if (rc != 0) { 3141 pr_err("error %d\n", rc); 3142 goto rw_error; 3143 } 3144 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MERR_CFG__A, 0x0013, 0); 3145 if (rc != 0) { 3146 pr_err("error %d\n", rc); 3147 goto rw_error; 3148 } 3149 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MCLK_CFG__A, MPEG_OUTPUT_CLK_DRIVE_STRENGTH << SIO_PDR_MCLK_CFG_DRIVE__B | 0x03 << SIO_PDR_MCLK_CFG_MODE__B, 0); 3150 if (rc != 0) { 3151 pr_err("error %d\n", rc); 3152 goto rw_error; 3153 } 3154 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MVAL_CFG__A, 0x0013, 0); 3155 if (rc != 0) { 3156 pr_err("error %d\n", rc); 3157 goto rw_error; 3158 } 3159 sio_pdr_md_cfg = 3160 MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH << 3161 SIO_PDR_MD0_CFG_DRIVE__B | 0x03 << SIO_PDR_MD0_CFG_MODE__B; 3162 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, sio_pdr_md_cfg, 0); 3163 if (rc != 0) { 3164 pr_err("error %d\n", rc); 3165 goto rw_error; 3166 } 3167 if (cfg_data->enable_parallel == true) { /* MPEG data output is parallel -> set MD1 to MD7 to output mode */ 3168 sio_pdr_md_cfg = 3169 MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH << 3170 SIO_PDR_MD0_CFG_DRIVE__B | 0x03 << 3171 SIO_PDR_MD0_CFG_MODE__B; 3172 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, sio_pdr_md_cfg, 0); 3173 if (rc != 0) { 3174 pr_err("error %d\n", rc); 3175 goto rw_error; 3176 } 3177 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, sio_pdr_md_cfg, 0); 3178 if (rc != 0) { 3179 pr_err("error %d\n", rc); 3180 goto rw_error; 3181 } 3182 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, sio_pdr_md_cfg, 0); 3183 if (rc != 0) { 3184 pr_err("error %d\n", rc); 3185 goto rw_error; 3186 } 3187 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, sio_pdr_md_cfg, 0); 3188 if (rc != 0) { 3189 pr_err("error %d\n", rc); 3190 goto rw_error; 3191 } 3192 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, sio_pdr_md_cfg, 0); 3193 if (rc != 0) { 3194 pr_err("error %d\n", rc); 3195 goto rw_error; 3196 } 3197 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, sio_pdr_md_cfg, 0); 3198 if (rc != 0) { 3199 pr_err("error %d\n", rc); 3200 goto rw_error; 3201 } 3202 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, sio_pdr_md_cfg, 0); 3203 if (rc != 0) { 3204 pr_err("error %d\n", rc); 3205 goto rw_error; 3206 } 3207 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, sio_pdr_md_cfg, 0); 3208 if (rc != 0) { 3209 pr_err("error %d\n", rc); 3210 goto rw_error; 3211 } 3212 } else { /* MPEG data output is serial -> set MD1 to MD7 to tri-state */ 3213 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, 0x0000, 0); 3214 if (rc != 0) { 3215 pr_err("error %d\n", rc); 3216 goto rw_error; 3217 } 3218 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, 0x0000, 0); 3219 if (rc != 0) { 3220 pr_err("error %d\n", rc); 3221 goto rw_error; 3222 } 3223 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, 0x0000, 0); 3224 if (rc != 0) { 3225 pr_err("error %d\n", rc); 3226 goto rw_error; 3227 } 3228 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, 0x0000, 0); 3229 if (rc != 0) { 3230 pr_err("error %d\n", rc); 3231 goto rw_error; 3232 } 3233 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, 0x0000, 0); 3234 if (rc != 0) { 3235 pr_err("error %d\n", rc); 3236 goto rw_error; 3237 } 3238 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, 0x0000, 0); 3239 if (rc != 0) { 3240 pr_err("error %d\n", rc); 3241 goto rw_error; 3242 } 3243 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, 0x0000, 0); 3244 if (rc != 0) { 3245 pr_err("error %d\n", rc); 3246 goto rw_error; 3247 } 3248 } 3249 /* Enable Monitor Bus output over MPEG pads and ctl input */ 3250 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MON_CFG__A, 0x0000, 0); 3251 if (rc != 0) { 3252 pr_err("error %d\n", rc); 3253 goto rw_error; 3254 } 3255 /* Write nomagic word to enable pdr reg write */ 3256 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3257 if (rc != 0) { 3258 pr_err("error %d\n", rc); 3259 goto rw_error; 3260 } 3261 } else { 3262 /* Write magic word to enable pdr reg write */ 3263 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0); 3264 if (rc != 0) { 3265 pr_err("error %d\n", rc); 3266 goto rw_error; 3267 } 3268 /* Set MPEG TS pads to inputmode */ 3269 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MSTRT_CFG__A, 0x0000, 0); 3270 if (rc != 0) { 3271 pr_err("error %d\n", rc); 3272 goto rw_error; 3273 } 3274 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MERR_CFG__A, 0x0000, 0); 3275 if (rc != 0) { 3276 pr_err("error %d\n", rc); 3277 goto rw_error; 3278 } 3279 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MCLK_CFG__A, 0x0000, 0); 3280 if (rc != 0) { 3281 pr_err("error %d\n", rc); 3282 goto rw_error; 3283 } 3284 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MVAL_CFG__A, 0x0000, 0); 3285 if (rc != 0) { 3286 pr_err("error %d\n", rc); 3287 goto rw_error; 3288 } 3289 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, 0x0000, 0); 3290 if (rc != 0) { 3291 pr_err("error %d\n", rc); 3292 goto rw_error; 3293 } 3294 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, 0x0000, 0); 3295 if (rc != 0) { 3296 pr_err("error %d\n", rc); 3297 goto rw_error; 3298 } 3299 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, 0x0000, 0); 3300 if (rc != 0) { 3301 pr_err("error %d\n", rc); 3302 goto rw_error; 3303 } 3304 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, 0x0000, 0); 3305 if (rc != 0) { 3306 pr_err("error %d\n", rc); 3307 goto rw_error; 3308 } 3309 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, 0x0000, 0); 3310 if (rc != 0) { 3311 pr_err("error %d\n", rc); 3312 goto rw_error; 3313 } 3314 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, 0x0000, 0); 3315 if (rc != 0) { 3316 pr_err("error %d\n", rc); 3317 goto rw_error; 3318 } 3319 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, 0x0000, 0); 3320 if (rc != 0) { 3321 pr_err("error %d\n", rc); 3322 goto rw_error; 3323 } 3324 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, 0x0000, 0); 3325 if (rc != 0) { 3326 pr_err("error %d\n", rc); 3327 goto rw_error; 3328 } 3329 /* Enable Monitor Bus output over MPEG pads and ctl input */ 3330 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MON_CFG__A, 0x0000, 0); 3331 if (rc != 0) { 3332 pr_err("error %d\n", rc); 3333 goto rw_error; 3334 } 3335 /* Write nomagic word to enable pdr reg write */ 3336 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3337 if (rc != 0) { 3338 pr_err("error %d\n", rc); 3339 goto rw_error; 3340 } 3341 } 3342 3343 /* save values for restore after re-acquire */ 3344 common_attr->mpeg_cfg.enable_mpeg_output = cfg_data->enable_mpeg_output; 3345 3346 return 0; 3347 rw_error: 3348 return rc; 3349 } 3350 3351 /*----------------------------------------------------------------------------*/ 3352 3353 3354 /*----------------------------------------------------------------------------*/ 3355 /* MPEG Output Configuration Functions - end */ 3356 /*----------------------------------------------------------------------------*/ 3357 3358 /*----------------------------------------------------------------------------*/ 3359 /* miscellaneous configurations - begin */ 3360 /*----------------------------------------------------------------------------*/ 3361 3362 /* 3363 * \fn int set_mpegtei_handling() 3364 * \brief Activate MPEG TEI handling settings. 3365 * \param devmod Pointer to demodulator instance. 3366 * \return int. 3367 * 3368 * This routine should be called during a set channel of QAM/VSB 3369 * 3370 */ 3371 static int set_mpegtei_handling(struct drx_demod_instance *demod) 3372 { 3373 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3374 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 3375 int rc; 3376 u16 fec_oc_dpr_mode = 0; 3377 u16 fec_oc_snc_mode = 0; 3378 u16 fec_oc_ems_mode = 0; 3379 3380 dev_addr = demod->my_i2c_dev_addr; 3381 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3382 3383 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_DPR_MODE__A, &fec_oc_dpr_mode, 0); 3384 if (rc != 0) { 3385 pr_err("error %d\n", rc); 3386 goto rw_error; 3387 } 3388 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode, 0); 3389 if (rc != 0) { 3390 pr_err("error %d\n", rc); 3391 goto rw_error; 3392 } 3393 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_EMS_MODE__A, &fec_oc_ems_mode, 0); 3394 if (rc != 0) { 3395 pr_err("error %d\n", rc); 3396 goto rw_error; 3397 } 3398 3399 /* reset to default, allow TEI bit to be changed */ 3400 fec_oc_dpr_mode &= (~FEC_OC_DPR_MODE_ERR_DISABLE__M); 3401 fec_oc_snc_mode &= (~(FEC_OC_SNC_MODE_ERROR_CTL__M | 3402 FEC_OC_SNC_MODE_CORR_DISABLE__M)); 3403 fec_oc_ems_mode &= (~FEC_OC_EMS_MODE_MODE__M); 3404 3405 if (ext_attr->disable_te_ihandling) { 3406 /* do not change TEI bit */ 3407 fec_oc_dpr_mode |= FEC_OC_DPR_MODE_ERR_DISABLE__M; 3408 fec_oc_snc_mode |= FEC_OC_SNC_MODE_CORR_DISABLE__M | 3409 ((0x2) << (FEC_OC_SNC_MODE_ERROR_CTL__B)); 3410 fec_oc_ems_mode |= ((0x01) << (FEC_OC_EMS_MODE_MODE__B)); 3411 } 3412 3413 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DPR_MODE__A, fec_oc_dpr_mode, 0); 3414 if (rc != 0) { 3415 pr_err("error %d\n", rc); 3416 goto rw_error; 3417 } 3418 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_MODE__A, fec_oc_snc_mode, 0); 3419 if (rc != 0) { 3420 pr_err("error %d\n", rc); 3421 goto rw_error; 3422 } 3423 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_EMS_MODE__A, fec_oc_ems_mode, 0); 3424 if (rc != 0) { 3425 pr_err("error %d\n", rc); 3426 goto rw_error; 3427 } 3428 3429 return 0; 3430 rw_error: 3431 return rc; 3432 } 3433 3434 /*----------------------------------------------------------------------------*/ 3435 /* 3436 * \fn int bit_reverse_mpeg_output() 3437 * \brief Set MPEG output bit-endian settings. 3438 * \param devmod Pointer to demodulator instance. 3439 * \return int. 3440 * 3441 * This routine should be called during a set channel of QAM/VSB 3442 * 3443 */ 3444 static int bit_reverse_mpeg_output(struct drx_demod_instance *demod) 3445 { 3446 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3447 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 3448 int rc; 3449 u16 fec_oc_ipr_mode = 0; 3450 3451 dev_addr = demod->my_i2c_dev_addr; 3452 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3453 3454 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_IPR_MODE__A, &fec_oc_ipr_mode, 0); 3455 if (rc != 0) { 3456 pr_err("error %d\n", rc); 3457 goto rw_error; 3458 } 3459 3460 /* reset to default (normal bit order) */ 3461 fec_oc_ipr_mode &= (~FEC_OC_IPR_MODE_REVERSE_ORDER__M); 3462 3463 if (ext_attr->bit_reverse_mpeg_outout) 3464 fec_oc_ipr_mode |= FEC_OC_IPR_MODE_REVERSE_ORDER__M; 3465 3466 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_MODE__A, fec_oc_ipr_mode, 0); 3467 if (rc != 0) { 3468 pr_err("error %d\n", rc); 3469 goto rw_error; 3470 } 3471 3472 return 0; 3473 rw_error: 3474 return rc; 3475 } 3476 3477 /*----------------------------------------------------------------------------*/ 3478 /* 3479 * \fn int set_mpeg_start_width() 3480 * \brief Set MPEG start width. 3481 * \param devmod Pointer to demodulator instance. 3482 * \return int. 3483 * 3484 * This routine should be called during a set channel of QAM/VSB 3485 * 3486 */ 3487 static int set_mpeg_start_width(struct drx_demod_instance *demod) 3488 { 3489 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3490 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 3491 struct drx_common_attr *common_attr = (struct drx_common_attr *) NULL; 3492 int rc; 3493 u16 fec_oc_comm_mb = 0; 3494 3495 dev_addr = demod->my_i2c_dev_addr; 3496 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3497 common_attr = demod->my_common_attr; 3498 3499 if ((common_attr->mpeg_cfg.static_clk == true) 3500 && (common_attr->mpeg_cfg.enable_parallel == false)) { 3501 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_COMM_MB__A, &fec_oc_comm_mb, 0); 3502 if (rc != 0) { 3503 pr_err("error %d\n", rc); 3504 goto rw_error; 3505 } 3506 fec_oc_comm_mb &= ~FEC_OC_COMM_MB_CTL_ON; 3507 if (ext_attr->mpeg_start_width == DRXJ_MPEG_START_WIDTH_8CLKCYC) 3508 fec_oc_comm_mb |= FEC_OC_COMM_MB_CTL_ON; 3509 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_COMM_MB__A, fec_oc_comm_mb, 0); 3510 if (rc != 0) { 3511 pr_err("error %d\n", rc); 3512 goto rw_error; 3513 } 3514 } 3515 3516 return 0; 3517 rw_error: 3518 return rc; 3519 } 3520 3521 /*----------------------------------------------------------------------------*/ 3522 /* miscellaneous configurations - end */ 3523 /*----------------------------------------------------------------------------*/ 3524 3525 /*----------------------------------------------------------------------------*/ 3526 /* UIO Configuration Functions - begin */ 3527 /*----------------------------------------------------------------------------*/ 3528 /* 3529 * \fn int ctrl_set_uio_cfg() 3530 * \brief Configure modus oprandi UIO. 3531 * \param demod Pointer to demodulator instance. 3532 * \param uio_cfg Pointer to a configuration setting for a certain UIO. 3533 * \return int. 3534 */ 3535 static int ctrl_set_uio_cfg(struct drx_demod_instance *demod, struct drxuio_cfg *uio_cfg) 3536 { 3537 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3538 int rc; 3539 3540 if ((uio_cfg == NULL) || (demod == NULL)) 3541 return -EINVAL; 3542 3543 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3544 3545 /* Write magic word to enable pdr reg write */ 3546 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 3547 if (rc != 0) { 3548 pr_err("error %d\n", rc); 3549 goto rw_error; 3550 } 3551 switch (uio_cfg->uio) { 3552 /*====================================================================*/ 3553 case DRX_UIO1: 3554 /* DRX_UIO1: SMA_TX UIO-1 */ 3555 if (!ext_attr->has_smatx) 3556 return -EIO; 3557 switch (uio_cfg->mode) { 3558 case DRX_UIO_MODE_FIRMWARE_SMA: /* fall through */ 3559 case DRX_UIO_MODE_FIRMWARE_SAW: /* fall through */ 3560 case DRX_UIO_MODE_READWRITE: 3561 ext_attr->uio_sma_tx_mode = uio_cfg->mode; 3562 break; 3563 case DRX_UIO_MODE_DISABLE: 3564 ext_attr->uio_sma_tx_mode = uio_cfg->mode; 3565 /* pad configuration register is set 0 - input mode */ 3566 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_CFG__A, 0, 0); 3567 if (rc != 0) { 3568 pr_err("error %d\n", rc); 3569 goto rw_error; 3570 } 3571 break; 3572 default: 3573 return -EINVAL; 3574 } /* switch ( uio_cfg->mode ) */ 3575 break; 3576 /*====================================================================*/ 3577 case DRX_UIO2: 3578 /* DRX_UIO2: SMA_RX UIO-2 */ 3579 if (!ext_attr->has_smarx) 3580 return -EIO; 3581 switch (uio_cfg->mode) { 3582 case DRX_UIO_MODE_FIRMWARE0: /* fall through */ 3583 case DRX_UIO_MODE_READWRITE: 3584 ext_attr->uio_sma_rx_mode = uio_cfg->mode; 3585 break; 3586 case DRX_UIO_MODE_DISABLE: 3587 ext_attr->uio_sma_rx_mode = uio_cfg->mode; 3588 /* pad configuration register is set 0 - input mode */ 3589 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_RX_CFG__A, 0, 0); 3590 if (rc != 0) { 3591 pr_err("error %d\n", rc); 3592 goto rw_error; 3593 } 3594 break; 3595 default: 3596 return -EINVAL; 3597 break; 3598 } /* switch ( uio_cfg->mode ) */ 3599 break; 3600 /*====================================================================*/ 3601 case DRX_UIO3: 3602 /* DRX_UIO3: GPIO UIO-3 */ 3603 if (!ext_attr->has_gpio) 3604 return -EIO; 3605 switch (uio_cfg->mode) { 3606 case DRX_UIO_MODE_FIRMWARE0: /* fall through */ 3607 case DRX_UIO_MODE_READWRITE: 3608 ext_attr->uio_gpio_mode = uio_cfg->mode; 3609 break; 3610 case DRX_UIO_MODE_DISABLE: 3611 ext_attr->uio_gpio_mode = uio_cfg->mode; 3612 /* pad configuration register is set 0 - input mode */ 3613 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_GPIO_CFG__A, 0, 0); 3614 if (rc != 0) { 3615 pr_err("error %d\n", rc); 3616 goto rw_error; 3617 } 3618 break; 3619 default: 3620 return -EINVAL; 3621 break; 3622 } /* switch ( uio_cfg->mode ) */ 3623 break; 3624 /*====================================================================*/ 3625 case DRX_UIO4: 3626 /* DRX_UIO4: IRQN UIO-4 */ 3627 if (!ext_attr->has_irqn) 3628 return -EIO; 3629 switch (uio_cfg->mode) { 3630 case DRX_UIO_MODE_READWRITE: 3631 ext_attr->uio_irqn_mode = uio_cfg->mode; 3632 break; 3633 case DRX_UIO_MODE_DISABLE: 3634 /* pad configuration register is set 0 - input mode */ 3635 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_IRQN_CFG__A, 0, 0); 3636 if (rc != 0) { 3637 pr_err("error %d\n", rc); 3638 goto rw_error; 3639 } 3640 ext_attr->uio_irqn_mode = uio_cfg->mode; 3641 break; 3642 case DRX_UIO_MODE_FIRMWARE0: /* fall through */ 3643 default: 3644 return -EINVAL; 3645 break; 3646 } /* switch ( uio_cfg->mode ) */ 3647 break; 3648 /*====================================================================*/ 3649 default: 3650 return -EINVAL; 3651 } /* switch ( uio_cfg->uio ) */ 3652 3653 /* Write magic word to disable pdr reg write */ 3654 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3655 if (rc != 0) { 3656 pr_err("error %d\n", rc); 3657 goto rw_error; 3658 } 3659 3660 return 0; 3661 rw_error: 3662 return rc; 3663 } 3664 3665 /* 3666 * \fn int ctrl_uio_write() 3667 * \brief Write to a UIO. 3668 * \param demod Pointer to demodulator instance. 3669 * \param uio_data Pointer to data container for a certain UIO. 3670 * \return int. 3671 */ 3672 static int 3673 ctrl_uio_write(struct drx_demod_instance *demod, struct drxuio_data *uio_data) 3674 { 3675 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3676 int rc; 3677 u16 pin_cfg_value = 0; 3678 u16 value = 0; 3679 3680 if ((uio_data == NULL) || (demod == NULL)) 3681 return -EINVAL; 3682 3683 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3684 3685 /* Write magic word to enable pdr reg write */ 3686 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 3687 if (rc != 0) { 3688 pr_err("error %d\n", rc); 3689 goto rw_error; 3690 } 3691 switch (uio_data->uio) { 3692 /*====================================================================*/ 3693 case DRX_UIO1: 3694 /* DRX_UIO1: SMA_TX UIO-1 */ 3695 if (!ext_attr->has_smatx) 3696 return -EIO; 3697 if ((ext_attr->uio_sma_tx_mode != DRX_UIO_MODE_READWRITE) 3698 && (ext_attr->uio_sma_tx_mode != DRX_UIO_MODE_FIRMWARE_SAW)) { 3699 return -EIO; 3700 } 3701 pin_cfg_value = 0; 3702 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3703 pin_cfg_value |= 0x0113; 3704 /* io_pad_cfg_mode output mode is drive always */ 3705 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3706 3707 /* write to io pad configuration register - output mode */ 3708 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_CFG__A, pin_cfg_value, 0); 3709 if (rc != 0) { 3710 pr_err("error %d\n", rc); 3711 goto rw_error; 3712 } 3713 3714 /* use corresponding bit in io data output registar */ 3715 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, &value, 0); 3716 if (rc != 0) { 3717 pr_err("error %d\n", rc); 3718 goto rw_error; 3719 } 3720 if (!uio_data->value) 3721 value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */ 3722 else 3723 value |= 0x8000; /* write one to 15th bit - 1st UIO */ 3724 3725 /* write back to io data output register */ 3726 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, value, 0); 3727 if (rc != 0) { 3728 pr_err("error %d\n", rc); 3729 goto rw_error; 3730 } 3731 break; 3732 /*======================================================================*/ 3733 case DRX_UIO2: 3734 /* DRX_UIO2: SMA_RX UIO-2 */ 3735 if (!ext_attr->has_smarx) 3736 return -EIO; 3737 if (ext_attr->uio_sma_rx_mode != DRX_UIO_MODE_READWRITE) 3738 return -EIO; 3739 3740 pin_cfg_value = 0; 3741 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3742 pin_cfg_value |= 0x0113; 3743 /* io_pad_cfg_mode output mode is drive always */ 3744 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3745 3746 /* write to io pad configuration register - output mode */ 3747 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_RX_CFG__A, pin_cfg_value, 0); 3748 if (rc != 0) { 3749 pr_err("error %d\n", rc); 3750 goto rw_error; 3751 } 3752 3753 /* use corresponding bit in io data output registar */ 3754 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, &value, 0); 3755 if (rc != 0) { 3756 pr_err("error %d\n", rc); 3757 goto rw_error; 3758 } 3759 if (!uio_data->value) 3760 value &= 0xBFFF; /* write zero to 14th bit - 2nd UIO */ 3761 else 3762 value |= 0x4000; /* write one to 14th bit - 2nd UIO */ 3763 3764 /* write back to io data output register */ 3765 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, value, 0); 3766 if (rc != 0) { 3767 pr_err("error %d\n", rc); 3768 goto rw_error; 3769 } 3770 break; 3771 /*====================================================================*/ 3772 case DRX_UIO3: 3773 /* DRX_UIO3: ASEL UIO-3 */ 3774 if (!ext_attr->has_gpio) 3775 return -EIO; 3776 if (ext_attr->uio_gpio_mode != DRX_UIO_MODE_READWRITE) 3777 return -EIO; 3778 3779 pin_cfg_value = 0; 3780 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3781 pin_cfg_value |= 0x0113; 3782 /* io_pad_cfg_mode output mode is drive always */ 3783 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3784 3785 /* write to io pad configuration register - output mode */ 3786 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_GPIO_CFG__A, pin_cfg_value, 0); 3787 if (rc != 0) { 3788 pr_err("error %d\n", rc); 3789 goto rw_error; 3790 } 3791 3792 /* use corresponding bit in io data output registar */ 3793 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_HI__A, &value, 0); 3794 if (rc != 0) { 3795 pr_err("error %d\n", rc); 3796 goto rw_error; 3797 } 3798 if (!uio_data->value) 3799 value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */ 3800 else 3801 value |= 0x0004; /* write one to 2nd bit - 3rd UIO */ 3802 3803 /* write back to io data output register */ 3804 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_HI__A, value, 0); 3805 if (rc != 0) { 3806 pr_err("error %d\n", rc); 3807 goto rw_error; 3808 } 3809 break; 3810 /*=====================================================================*/ 3811 case DRX_UIO4: 3812 /* DRX_UIO4: IRQN UIO-4 */ 3813 if (!ext_attr->has_irqn) 3814 return -EIO; 3815 3816 if (ext_attr->uio_irqn_mode != DRX_UIO_MODE_READWRITE) 3817 return -EIO; 3818 3819 pin_cfg_value = 0; 3820 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3821 pin_cfg_value |= 0x0113; 3822 /* io_pad_cfg_mode output mode is drive always */ 3823 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3824 3825 /* write to io pad configuration register - output mode */ 3826 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_IRQN_CFG__A, pin_cfg_value, 0); 3827 if (rc != 0) { 3828 pr_err("error %d\n", rc); 3829 goto rw_error; 3830 } 3831 3832 /* use corresponding bit in io data output registar */ 3833 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, &value, 0); 3834 if (rc != 0) { 3835 pr_err("error %d\n", rc); 3836 goto rw_error; 3837 } 3838 if (uio_data->value == false) 3839 value &= 0xEFFF; /* write zero to 12th bit - 4th UIO */ 3840 else 3841 value |= 0x1000; /* write one to 12th bit - 4th UIO */ 3842 3843 /* write back to io data output register */ 3844 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, value, 0); 3845 if (rc != 0) { 3846 pr_err("error %d\n", rc); 3847 goto rw_error; 3848 } 3849 break; 3850 /*=====================================================================*/ 3851 default: 3852 return -EINVAL; 3853 } /* switch ( uio_data->uio ) */ 3854 3855 /* Write magic word to disable pdr reg write */ 3856 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3857 if (rc != 0) { 3858 pr_err("error %d\n", rc); 3859 goto rw_error; 3860 } 3861 3862 return 0; 3863 rw_error: 3864 return rc; 3865 } 3866 3867 /*---------------------------------------------------------------------------*/ 3868 /* UIO Configuration Functions - end */ 3869 /*---------------------------------------------------------------------------*/ 3870 3871 /*----------------------------------------------------------------------------*/ 3872 /* I2C Bridge Functions - begin */ 3873 /*----------------------------------------------------------------------------*/ 3874 /* 3875 * \fn int ctrl_i2c_bridge() 3876 * \brief Open or close the I2C switch to tuner. 3877 * \param demod Pointer to demodulator instance. 3878 * \param bridge_closed Pointer to bool indication if bridge is closed not. 3879 * \return int. 3880 3881 */ 3882 static int 3883 ctrl_i2c_bridge(struct drx_demod_instance *demod, bool *bridge_closed) 3884 { 3885 struct drxj_hi_cmd hi_cmd; 3886 u16 result = 0; 3887 3888 /* check arguments */ 3889 if (bridge_closed == NULL) 3890 return -EINVAL; 3891 3892 hi_cmd.cmd = SIO_HI_RA_RAM_CMD_BRDCTRL; 3893 hi_cmd.param1 = SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY; 3894 if (*bridge_closed) 3895 hi_cmd.param2 = SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED; 3896 else 3897 hi_cmd.param2 = SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN; 3898 3899 return hi_command(demod->my_i2c_dev_addr, &hi_cmd, &result); 3900 } 3901 3902 /*----------------------------------------------------------------------------*/ 3903 /* I2C Bridge Functions - end */ 3904 /*----------------------------------------------------------------------------*/ 3905 3906 /*----------------------------------------------------------------------------*/ 3907 /* Smart antenna Functions - begin */ 3908 /*----------------------------------------------------------------------------*/ 3909 /* 3910 * \fn int smart_ant_init() 3911 * \brief Initialize Smart Antenna. 3912 * \param pointer to struct drx_demod_instance. 3913 * \return int. 3914 * 3915 */ 3916 static int smart_ant_init(struct drx_demod_instance *demod) 3917 { 3918 struct drxj_data *ext_attr = NULL; 3919 struct i2c_device_addr *dev_addr = NULL; 3920 struct drxuio_cfg uio_cfg = { DRX_UIO1, DRX_UIO_MODE_FIRMWARE_SMA }; 3921 int rc; 3922 u16 data = 0; 3923 3924 dev_addr = demod->my_i2c_dev_addr; 3925 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3926 3927 /* Write magic word to enable pdr reg write */ 3928 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 3929 if (rc != 0) { 3930 pr_err("error %d\n", rc); 3931 goto rw_error; 3932 } 3933 /* init smart antenna */ 3934 rc = drxj_dap_read_reg16(dev_addr, SIO_SA_TX_COMMAND__A, &data, 0); 3935 if (rc != 0) { 3936 pr_err("error %d\n", rc); 3937 goto rw_error; 3938 } 3939 if (ext_attr->smart_ant_inverted) { 3940 rc = drxj_dap_write_reg16(dev_addr, SIO_SA_TX_COMMAND__A, (data | SIO_SA_TX_COMMAND_TX_INVERT__M) | SIO_SA_TX_COMMAND_TX_ENABLE__M, 0); 3941 if (rc != 0) { 3942 pr_err("error %d\n", rc); 3943 goto rw_error; 3944 } 3945 } else { 3946 rc = drxj_dap_write_reg16(dev_addr, SIO_SA_TX_COMMAND__A, (data & (~SIO_SA_TX_COMMAND_TX_INVERT__M)) | SIO_SA_TX_COMMAND_TX_ENABLE__M, 0); 3947 if (rc != 0) { 3948 pr_err("error %d\n", rc); 3949 goto rw_error; 3950 } 3951 } 3952 3953 /* config SMA_TX pin to smart antenna mode */ 3954 rc = ctrl_set_uio_cfg(demod, &uio_cfg); 3955 if (rc != 0) { 3956 pr_err("error %d\n", rc); 3957 goto rw_error; 3958 } 3959 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_CFG__A, 0x13, 0); 3960 if (rc != 0) { 3961 pr_err("error %d\n", rc); 3962 goto rw_error; 3963 } 3964 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_GPIO_FNC__A, 0x03, 0); 3965 if (rc != 0) { 3966 pr_err("error %d\n", rc); 3967 goto rw_error; 3968 } 3969 3970 /* Write magic word to disable pdr reg write */ 3971 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3972 if (rc != 0) { 3973 pr_err("error %d\n", rc); 3974 goto rw_error; 3975 } 3976 3977 return 0; 3978 rw_error: 3979 return rc; 3980 } 3981 3982 static int scu_command(struct i2c_device_addr *dev_addr, struct drxjscu_cmd *cmd) 3983 { 3984 int rc; 3985 u16 cur_cmd = 0; 3986 unsigned long timeout; 3987 3988 /* Check param */ 3989 if (cmd == NULL) 3990 return -EINVAL; 3991 3992 /* Wait until SCU command interface is ready to receive command */ 3993 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_COMMAND__A, &cur_cmd, 0); 3994 if (rc != 0) { 3995 pr_err("error %d\n", rc); 3996 goto rw_error; 3997 } 3998 if (cur_cmd != DRX_SCU_READY) 3999 return -EIO; 4000 4001 switch (cmd->parameter_len) { 4002 case 5: 4003 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_4__A, *(cmd->parameter + 4), 0); 4004 if (rc != 0) { 4005 pr_err("error %d\n", rc); 4006 goto rw_error; 4007 } /* fallthrough */ 4008 case 4: 4009 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_3__A, *(cmd->parameter + 3), 0); 4010 if (rc != 0) { 4011 pr_err("error %d\n", rc); 4012 goto rw_error; 4013 } /* fallthrough */ 4014 case 3: 4015 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_2__A, *(cmd->parameter + 2), 0); 4016 if (rc != 0) { 4017 pr_err("error %d\n", rc); 4018 goto rw_error; 4019 } /* fallthrough */ 4020 case 2: 4021 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_1__A, *(cmd->parameter + 1), 0); 4022 if (rc != 0) { 4023 pr_err("error %d\n", rc); 4024 goto rw_error; 4025 } /* fallthrough */ 4026 case 1: 4027 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_0__A, *(cmd->parameter + 0), 0); 4028 if (rc != 0) { 4029 pr_err("error %d\n", rc); 4030 goto rw_error; 4031 } /* fallthrough */ 4032 case 0: 4033 /* do nothing */ 4034 break; 4035 default: 4036 /* this number of parameters is not supported */ 4037 return -EIO; 4038 } 4039 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_COMMAND__A, cmd->command, 0); 4040 if (rc != 0) { 4041 pr_err("error %d\n", rc); 4042 goto rw_error; 4043 } 4044 4045 /* Wait until SCU has processed command */ 4046 timeout = jiffies + msecs_to_jiffies(DRXJ_MAX_WAITTIME); 4047 while (time_is_after_jiffies(timeout)) { 4048 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_COMMAND__A, &cur_cmd, 0); 4049 if (rc != 0) { 4050 pr_err("error %d\n", rc); 4051 goto rw_error; 4052 } 4053 if (cur_cmd == DRX_SCU_READY) 4054 break; 4055 usleep_range(1000, 2000); 4056 } 4057 4058 if (cur_cmd != DRX_SCU_READY) 4059 return -EIO; 4060 4061 /* read results */ 4062 if ((cmd->result_len > 0) && (cmd->result != NULL)) { 4063 s16 err; 4064 4065 switch (cmd->result_len) { 4066 case 4: 4067 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_3__A, cmd->result + 3, 0); 4068 if (rc != 0) { 4069 pr_err("error %d\n", rc); 4070 goto rw_error; 4071 } /* fallthrough */ 4072 case 3: 4073 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_2__A, cmd->result + 2, 0); 4074 if (rc != 0) { 4075 pr_err("error %d\n", rc); 4076 goto rw_error; 4077 } /* fallthrough */ 4078 case 2: 4079 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_1__A, cmd->result + 1, 0); 4080 if (rc != 0) { 4081 pr_err("error %d\n", rc); 4082 goto rw_error; 4083 } /* fallthrough */ 4084 case 1: 4085 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_0__A, cmd->result + 0, 0); 4086 if (rc != 0) { 4087 pr_err("error %d\n", rc); 4088 goto rw_error; 4089 } /* fallthrough */ 4090 case 0: 4091 /* do nothing */ 4092 break; 4093 default: 4094 /* this number of parameters is not supported */ 4095 return -EIO; 4096 } 4097 4098 /* Check if an error was reported by SCU */ 4099 err = cmd->result[0]; 4100 4101 /* check a few fixed error codes */ 4102 if ((err == (s16) SCU_RAM_PARAM_0_RESULT_UNKSTD) 4103 || (err == (s16) SCU_RAM_PARAM_0_RESULT_UNKCMD) 4104 || (err == (s16) SCU_RAM_PARAM_0_RESULT_INVPAR) 4105 || (err == (s16) SCU_RAM_PARAM_0_RESULT_SIZE) 4106 ) { 4107 return -EINVAL; 4108 } 4109 /* here it is assumed that negative means error, and positive no error */ 4110 else if (err < 0) 4111 return -EIO; 4112 else 4113 return 0; 4114 } 4115 4116 return 0; 4117 4118 rw_error: 4119 return rc; 4120 } 4121 4122 /* 4123 * \fn int DRXJ_DAP_SCUAtomicReadWriteBlock() 4124 * \brief Basic access routine for SCU atomic read or write access 4125 * \param dev_addr pointer to i2c dev address 4126 * \param addr destination/source address 4127 * \param datasize size of data buffer in bytes 4128 * \param data pointer to data buffer 4129 * \return int 4130 * \retval 0 Succes 4131 * \retval -EIO Timeout, I2C error, illegal bank 4132 * 4133 */ 4134 #define ADDR_AT_SCU_SPACE(x) ((x - 0x82E000) * 2) 4135 static 4136 int drxj_dap_scu_atomic_read_write_block(struct i2c_device_addr *dev_addr, u32 addr, u16 datasize, /* max 30 bytes because the limit of SCU parameter */ 4137 u8 *data, bool read_flag) 4138 { 4139 struct drxjscu_cmd scu_cmd; 4140 int rc; 4141 u16 set_param_parameters[18]; 4142 u16 cmd_result[15]; 4143 4144 /* Parameter check */ 4145 if (!data || !dev_addr || (datasize % 2) || ((datasize / 2) > 16)) 4146 return -EINVAL; 4147 4148 set_param_parameters[1] = (u16) ADDR_AT_SCU_SPACE(addr); 4149 if (read_flag) { /* read */ 4150 set_param_parameters[0] = ((~(0x0080)) & datasize); 4151 scu_cmd.parameter_len = 2; 4152 scu_cmd.result_len = datasize / 2 + 2; 4153 } else { 4154 int i = 0; 4155 4156 set_param_parameters[0] = 0x0080 | datasize; 4157 for (i = 0; i < (datasize / 2); i++) { 4158 set_param_parameters[i + 2] = 4159 (data[2 * i] | (data[(2 * i) + 1] << 8)); 4160 } 4161 scu_cmd.parameter_len = datasize / 2 + 2; 4162 scu_cmd.result_len = 1; 4163 } 4164 4165 scu_cmd.command = 4166 SCU_RAM_COMMAND_STANDARD_TOP | 4167 SCU_RAM_COMMAND_CMD_AUX_SCU_ATOMIC_ACCESS; 4168 scu_cmd.result = cmd_result; 4169 scu_cmd.parameter = set_param_parameters; 4170 rc = scu_command(dev_addr, &scu_cmd); 4171 if (rc != 0) { 4172 pr_err("error %d\n", rc); 4173 goto rw_error; 4174 } 4175 4176 if (read_flag) { 4177 int i = 0; 4178 /* read data from buffer */ 4179 for (i = 0; i < (datasize / 2); i++) { 4180 data[2 * i] = (u8) (scu_cmd.result[i + 2] & 0xFF); 4181 data[(2 * i) + 1] = (u8) (scu_cmd.result[i + 2] >> 8); 4182 } 4183 } 4184 4185 return 0; 4186 4187 rw_error: 4188 return rc; 4189 4190 } 4191 4192 /*============================================================================*/ 4193 4194 /* 4195 * \fn int DRXJ_DAP_AtomicReadReg16() 4196 * \brief Atomic read of 16 bits words 4197 */ 4198 static 4199 int drxj_dap_scu_atomic_read_reg16(struct i2c_device_addr *dev_addr, 4200 u32 addr, 4201 u16 *data, u32 flags) 4202 { 4203 u8 buf[2] = { 0 }; 4204 int rc = -EIO; 4205 u16 word = 0; 4206 4207 if (!data) 4208 return -EINVAL; 4209 4210 rc = drxj_dap_scu_atomic_read_write_block(dev_addr, addr, 2, buf, true); 4211 if (rc < 0) 4212 return rc; 4213 4214 word = (u16) (buf[0] + (buf[1] << 8)); 4215 4216 *data = word; 4217 4218 return rc; 4219 } 4220 4221 /*============================================================================*/ 4222 /* 4223 * \fn int drxj_dap_scu_atomic_write_reg16() 4224 * \brief Atomic read of 16 bits words 4225 */ 4226 static 4227 int drxj_dap_scu_atomic_write_reg16(struct i2c_device_addr *dev_addr, 4228 u32 addr, 4229 u16 data, u32 flags) 4230 { 4231 u8 buf[2]; 4232 int rc = -EIO; 4233 4234 buf[0] = (u8) (data & 0xff); 4235 buf[1] = (u8) ((data >> 8) & 0xff); 4236 4237 rc = drxj_dap_scu_atomic_read_write_block(dev_addr, addr, 2, buf, false); 4238 4239 return rc; 4240 } 4241 4242 /* -------------------------------------------------------------------------- */ 4243 /* 4244 * \brief Measure result of ADC synchronisation 4245 * \param demod demod instance 4246 * \param count (returned) count 4247 * \return int. 4248 * \retval 0 Success 4249 * \retval -EIO Failure: I2C error 4250 * 4251 */ 4252 static int adc_sync_measurement(struct drx_demod_instance *demod, u16 *count) 4253 { 4254 struct i2c_device_addr *dev_addr = NULL; 4255 int rc; 4256 u16 data = 0; 4257 4258 dev_addr = demod->my_i2c_dev_addr; 4259 4260 /* Start measurement */ 4261 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE, 0); 4262 if (rc != 0) { 4263 pr_err("error %d\n", rc); 4264 goto rw_error; 4265 } 4266 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_START_LOCK__A, 1, 0); 4267 if (rc != 0) { 4268 pr_err("error %d\n", rc); 4269 goto rw_error; 4270 } 4271 4272 /* Wait at least 3*128*(1/sysclk) <<< 1 millisec */ 4273 msleep(1); 4274 4275 *count = 0; 4276 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_PHASE0__A, &data, 0); 4277 if (rc != 0) { 4278 pr_err("error %d\n", rc); 4279 goto rw_error; 4280 } 4281 if (data == 127) 4282 *count = *count + 1; 4283 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_PHASE1__A, &data, 0); 4284 if (rc != 0) { 4285 pr_err("error %d\n", rc); 4286 goto rw_error; 4287 } 4288 if (data == 127) 4289 *count = *count + 1; 4290 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_PHASE2__A, &data, 0); 4291 if (rc != 0) { 4292 pr_err("error %d\n", rc); 4293 goto rw_error; 4294 } 4295 if (data == 127) 4296 *count = *count + 1; 4297 4298 return 0; 4299 rw_error: 4300 return rc; 4301 } 4302 4303 /* 4304 * \brief Synchronize analog and digital clock domains 4305 * \param demod demod instance 4306 * \return int. 4307 * \retval 0 Success 4308 * \retval -EIO Failure: I2C error or failure to synchronize 4309 * 4310 * An IQM reset will also reset the results of this synchronization. 4311 * After an IQM reset this routine needs to be called again. 4312 * 4313 */ 4314 4315 static int adc_synchronization(struct drx_demod_instance *demod) 4316 { 4317 struct i2c_device_addr *dev_addr = NULL; 4318 int rc; 4319 u16 count = 0; 4320 4321 dev_addr = demod->my_i2c_dev_addr; 4322 4323 rc = adc_sync_measurement(demod, &count); 4324 if (rc != 0) { 4325 pr_err("error %d\n", rc); 4326 goto rw_error; 4327 } 4328 4329 if (count == 1) { 4330 /* Try sampling on a different edge */ 4331 u16 clk_neg = 0; 4332 4333 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_CLKNEG__A, &clk_neg, 0); 4334 if (rc != 0) { 4335 pr_err("error %d\n", rc); 4336 goto rw_error; 4337 } 4338 4339 clk_neg ^= IQM_AF_CLKNEG_CLKNEGDATA__M; 4340 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLKNEG__A, clk_neg, 0); 4341 if (rc != 0) { 4342 pr_err("error %d\n", rc); 4343 goto rw_error; 4344 } 4345 4346 rc = adc_sync_measurement(demod, &count); 4347 if (rc != 0) { 4348 pr_err("error %d\n", rc); 4349 goto rw_error; 4350 } 4351 } 4352 4353 /* TODO: implement fallback scenarios */ 4354 if (count < 2) 4355 return -EIO; 4356 4357 return 0; 4358 rw_error: 4359 return rc; 4360 } 4361 4362 /*============================================================================*/ 4363 /*== END AUXILIARY FUNCTIONS ==*/ 4364 /*============================================================================*/ 4365 4366 /*============================================================================*/ 4367 /*============================================================================*/ 4368 /*== 8VSB & QAM COMMON DATAPATH FUNCTIONS ==*/ 4369 /*============================================================================*/ 4370 /*============================================================================*/ 4371 /* 4372 * \fn int init_agc () 4373 * \brief Initialize AGC for all standards. 4374 * \param demod instance of demodulator. 4375 * \param channel pointer to channel data. 4376 * \return int. 4377 */ 4378 static int init_agc(struct drx_demod_instance *demod) 4379 { 4380 struct i2c_device_addr *dev_addr = NULL; 4381 struct drx_common_attr *common_attr = NULL; 4382 struct drxj_data *ext_attr = NULL; 4383 struct drxj_cfg_agc *p_agc_rf_settings = NULL; 4384 struct drxj_cfg_agc *p_agc_if_settings = NULL; 4385 int rc; 4386 u16 ingain_tgt_max = 0; 4387 u16 clp_dir_to = 0; 4388 u16 sns_sum_max = 0; 4389 u16 clp_sum_max = 0; 4390 u16 sns_dir_to = 0; 4391 u16 ki_innergain_min = 0; 4392 u16 agc_ki = 0; 4393 u16 ki_max = 0; 4394 u16 if_iaccu_hi_tgt_min = 0; 4395 u16 data = 0; 4396 u16 agc_ki_dgain = 0; 4397 u16 ki_min = 0; 4398 u16 clp_ctrl_mode = 0; 4399 u16 agc_rf = 0; 4400 u16 agc_if = 0; 4401 4402 dev_addr = demod->my_i2c_dev_addr; 4403 common_attr = (struct drx_common_attr *) demod->my_common_attr; 4404 ext_attr = (struct drxj_data *) demod->my_ext_attr; 4405 4406 switch (ext_attr->standard) { 4407 case DRX_STANDARD_8VSB: 4408 clp_sum_max = 1023; 4409 clp_dir_to = (u16) (-9); 4410 sns_sum_max = 1023; 4411 sns_dir_to = (u16) (-9); 4412 ki_innergain_min = (u16) (-32768); 4413 ki_max = 0x032C; 4414 agc_ki_dgain = 0xC; 4415 if_iaccu_hi_tgt_min = 2047; 4416 ki_min = 0x0117; 4417 ingain_tgt_max = 16383; 4418 clp_ctrl_mode = 0; 4419 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff, 0); 4420 if (rc != 0) { 4421 pr_err("error %d\n", rc); 4422 goto rw_error; 4423 } 4424 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0, 0); 4425 if (rc != 0) { 4426 pr_err("error %d\n", rc); 4427 goto rw_error; 4428 } 4429 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM__A, 0, 0); 4430 if (rc != 0) { 4431 pr_err("error %d\n", rc); 4432 goto rw_error; 4433 } 4434 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CYCCNT__A, 0, 0); 4435 if (rc != 0) { 4436 pr_err("error %d\n", rc); 4437 goto rw_error; 4438 } 4439 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_WD__A, 0, 0); 4440 if (rc != 0) { 4441 pr_err("error %d\n", rc); 4442 goto rw_error; 4443 } 4444 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_STP__A, 1, 0); 4445 if (rc != 0) { 4446 pr_err("error %d\n", rc); 4447 goto rw_error; 4448 } 4449 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM__A, 0, 0); 4450 if (rc != 0) { 4451 pr_err("error %d\n", rc); 4452 goto rw_error; 4453 } 4454 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_CYCCNT__A, 0, 0); 4455 if (rc != 0) { 4456 pr_err("error %d\n", rc); 4457 goto rw_error; 4458 } 4459 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_WD__A, 0, 0); 4460 if (rc != 0) { 4461 pr_err("error %d\n", rc); 4462 goto rw_error; 4463 } 4464 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_STP__A, 1, 0); 4465 if (rc != 0) { 4466 pr_err("error %d\n", rc); 4467 goto rw_error; 4468 } 4469 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN__A, 1024, 0); 4470 if (rc != 0) { 4471 pr_err("error %d\n", rc); 4472 goto rw_error; 4473 } 4474 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_VSB_AGC_POW_TGT__A, 22600, 0); 4475 if (rc != 0) { 4476 pr_err("error %d\n", rc); 4477 goto rw_error; 4478 } 4479 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT__A, 13200, 0); 4480 if (rc != 0) { 4481 pr_err("error %d\n", rc); 4482 goto rw_error; 4483 } 4484 p_agc_if_settings = &(ext_attr->vsb_if_agc_cfg); 4485 p_agc_rf_settings = &(ext_attr->vsb_rf_agc_cfg); 4486 break; 4487 #ifndef DRXJ_VSB_ONLY 4488 case DRX_STANDARD_ITU_A: 4489 case DRX_STANDARD_ITU_C: 4490 case DRX_STANDARD_ITU_B: 4491 ingain_tgt_max = 5119; 4492 clp_sum_max = 1023; 4493 clp_dir_to = (u16) (-5); 4494 sns_sum_max = 127; 4495 sns_dir_to = (u16) (-3); 4496 ki_innergain_min = 0; 4497 ki_max = 0x0657; 4498 if_iaccu_hi_tgt_min = 2047; 4499 agc_ki_dgain = 0x7; 4500 ki_min = 0x0117; 4501 clp_ctrl_mode = 0; 4502 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff, 0); 4503 if (rc != 0) { 4504 pr_err("error %d\n", rc); 4505 goto rw_error; 4506 } 4507 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0, 0); 4508 if (rc != 0) { 4509 pr_err("error %d\n", rc); 4510 goto rw_error; 4511 } 4512 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM__A, 0, 0); 4513 if (rc != 0) { 4514 pr_err("error %d\n", rc); 4515 goto rw_error; 4516 } 4517 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CYCCNT__A, 0, 0); 4518 if (rc != 0) { 4519 pr_err("error %d\n", rc); 4520 goto rw_error; 4521 } 4522 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_WD__A, 0, 0); 4523 if (rc != 0) { 4524 pr_err("error %d\n", rc); 4525 goto rw_error; 4526 } 4527 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_STP__A, 1, 0); 4528 if (rc != 0) { 4529 pr_err("error %d\n", rc); 4530 goto rw_error; 4531 } 4532 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM__A, 0, 0); 4533 if (rc != 0) { 4534 pr_err("error %d\n", rc); 4535 goto rw_error; 4536 } 4537 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_CYCCNT__A, 0, 0); 4538 if (rc != 0) { 4539 pr_err("error %d\n", rc); 4540 goto rw_error; 4541 } 4542 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_WD__A, 0, 0); 4543 if (rc != 0) { 4544 pr_err("error %d\n", rc); 4545 goto rw_error; 4546 } 4547 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_STP__A, 1, 0); 4548 if (rc != 0) { 4549 pr_err("error %d\n", rc); 4550 goto rw_error; 4551 } 4552 p_agc_if_settings = &(ext_attr->qam_if_agc_cfg); 4553 p_agc_rf_settings = &(ext_attr->qam_rf_agc_cfg); 4554 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT__A, p_agc_if_settings->top, 0); 4555 if (rc != 0) { 4556 pr_err("error %d\n", rc); 4557 goto rw_error; 4558 } 4559 4560 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_AGC_KI__A, &agc_ki, 0); 4561 if (rc != 0) { 4562 pr_err("error %d\n", rc); 4563 goto rw_error; 4564 } 4565 agc_ki &= 0xf000; 4566 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI__A, agc_ki, 0); 4567 if (rc != 0) { 4568 pr_err("error %d\n", rc); 4569 goto rw_error; 4570 } 4571 break; 4572 #endif 4573 default: 4574 return -EINVAL; 4575 } 4576 4577 /* for new AGC interface */ 4578 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT_MIN__A, p_agc_if_settings->top, 0); 4579 if (rc != 0) { 4580 pr_err("error %d\n", rc); 4581 goto rw_error; 4582 } 4583 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN__A, p_agc_if_settings->top, 0); 4584 if (rc != 0) { 4585 pr_err("error %d\n", rc); 4586 goto rw_error; 4587 } /* Gain fed from inner to outer AGC */ 4588 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingain_tgt_max, 0); 4589 if (rc != 0) { 4590 pr_err("error %d\n", rc); 4591 goto rw_error; 4592 } 4593 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, if_iaccu_hi_tgt_min, 0); 4594 if (rc != 0) { 4595 pr_err("error %d\n", rc); 4596 goto rw_error; 4597 } 4598 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_IF_IACCU_HI__A, 0, 0); 4599 if (rc != 0) { 4600 pr_err("error %d\n", rc); 4601 goto rw_error; 4602 } /* set to p_agc_settings->top before */ 4603 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_IF_IACCU_LO__A, 0, 0); 4604 if (rc != 0) { 4605 pr_err("error %d\n", rc); 4606 goto rw_error; 4607 } 4608 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_RF_IACCU_HI__A, 0, 0); 4609 if (rc != 0) { 4610 pr_err("error %d\n", rc); 4611 goto rw_error; 4612 } 4613 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_RF_IACCU_LO__A, 0, 0); 4614 if (rc != 0) { 4615 pr_err("error %d\n", rc); 4616 goto rw_error; 4617 } 4618 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_RF_MAX__A, 32767, 0); 4619 if (rc != 0) { 4620 pr_err("error %d\n", rc); 4621 goto rw_error; 4622 } 4623 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM_MAX__A, clp_sum_max, 0); 4624 if (rc != 0) { 4625 pr_err("error %d\n", rc); 4626 goto rw_error; 4627 } 4628 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM_MAX__A, sns_sum_max, 0); 4629 if (rc != 0) { 4630 pr_err("error %d\n", rc); 4631 goto rw_error; 4632 } 4633 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, ki_innergain_min, 0); 4634 if (rc != 0) { 4635 pr_err("error %d\n", rc); 4636 goto rw_error; 4637 } 4638 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50, 0); 4639 if (rc != 0) { 4640 pr_err("error %d\n", rc); 4641 goto rw_error; 4642 } 4643 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_CYCLEN__A, 500, 0); 4644 if (rc != 0) { 4645 pr_err("error %d\n", rc); 4646 goto rw_error; 4647 } 4648 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_CYCLEN__A, 500, 0); 4649 if (rc != 0) { 4650 pr_err("error %d\n", rc); 4651 goto rw_error; 4652 } 4653 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20, 0); 4654 if (rc != 0) { 4655 pr_err("error %d\n", rc); 4656 goto rw_error; 4657 } 4658 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MIN__A, ki_min, 0); 4659 if (rc != 0) { 4660 pr_err("error %d\n", rc); 4661 goto rw_error; 4662 } 4663 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAX__A, ki_max, 0); 4664 if (rc != 0) { 4665 pr_err("error %d\n", rc); 4666 goto rw_error; 4667 } 4668 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_RED__A, 0, 0); 4669 if (rc != 0) { 4670 pr_err("error %d\n", rc); 4671 goto rw_error; 4672 } 4673 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM_MIN__A, 8, 0); 4674 if (rc != 0) { 4675 pr_err("error %d\n", rc); 4676 goto rw_error; 4677 } 4678 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CYCLEN__A, 500, 0); 4679 if (rc != 0) { 4680 pr_err("error %d\n", rc); 4681 goto rw_error; 4682 } 4683 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_TO__A, clp_dir_to, 0); 4684 if (rc != 0) { 4685 pr_err("error %d\n", rc); 4686 goto rw_error; 4687 } 4688 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM_MIN__A, 8, 0); 4689 if (rc != 0) { 4690 pr_err("error %d\n", rc); 4691 goto rw_error; 4692 } 4693 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_TO__A, sns_dir_to, 0); 4694 if (rc != 0) { 4695 pr_err("error %d\n", rc); 4696 goto rw_error; 4697 } 4698 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, 50, 0); 4699 if (rc != 0) { 4700 pr_err("error %d\n", rc); 4701 goto rw_error; 4702 } 4703 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CTRL_MODE__A, clp_ctrl_mode, 0); 4704 if (rc != 0) { 4705 pr_err("error %d\n", rc); 4706 goto rw_error; 4707 } 4708 4709 agc_rf = 0x800 + p_agc_rf_settings->cut_off_current; 4710 if (common_attr->tuner_rf_agc_pol == true) 4711 agc_rf = 0x87ff - agc_rf; 4712 4713 agc_if = 0x800; 4714 if (common_attr->tuner_if_agc_pol == true) 4715 agc_rf = 0x87ff - agc_rf; 4716 4717 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AGC_RF__A, agc_rf, 0); 4718 if (rc != 0) { 4719 pr_err("error %d\n", rc); 4720 goto rw_error; 4721 } 4722 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AGC_IF__A, agc_if, 0); 4723 if (rc != 0) { 4724 pr_err("error %d\n", rc); 4725 goto rw_error; 4726 } 4727 4728 /* Set/restore Ki DGAIN factor */ 4729 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 4730 if (rc != 0) { 4731 pr_err("error %d\n", rc); 4732 goto rw_error; 4733 } 4734 data &= ~SCU_RAM_AGC_KI_DGAIN__M; 4735 data |= (agc_ki_dgain << SCU_RAM_AGC_KI_DGAIN__B); 4736 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 4737 if (rc != 0) { 4738 pr_err("error %d\n", rc); 4739 goto rw_error; 4740 } 4741 4742 return 0; 4743 rw_error: 4744 return rc; 4745 } 4746 4747 /* 4748 * \fn int set_frequency () 4749 * \brief Set frequency shift. 4750 * \param demod instance of demodulator. 4751 * \param channel pointer to channel data. 4752 * \param tuner_freq_offset residual frequency from tuner. 4753 * \return int. 4754 */ 4755 static int 4756 set_frequency(struct drx_demod_instance *demod, 4757 struct drx_channel *channel, s32 tuner_freq_offset) 4758 { 4759 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 4760 struct drxj_data *ext_attr = demod->my_ext_attr; 4761 int rc; 4762 s32 sampling_frequency = 0; 4763 s32 frequency_shift = 0; 4764 s32 if_freq_actual = 0; 4765 s32 rf_freq_residual = -1 * tuner_freq_offset; 4766 s32 adc_freq = 0; 4767 s32 intermediate_freq = 0; 4768 u32 iqm_fs_rate_ofs = 0; 4769 bool adc_flip = true; 4770 bool select_pos_image = false; 4771 bool rf_mirror; 4772 bool tuner_mirror; 4773 bool image_to_select = true; 4774 s32 fm_frequency_shift = 0; 4775 4776 rf_mirror = (ext_attr->mirror == DRX_MIRROR_YES) ? true : false; 4777 tuner_mirror = demod->my_common_attr->mirror_freq_spect ? false : true; 4778 /* 4779 Program frequency shifter 4780 No need to account for mirroring on RF 4781 */ 4782 switch (ext_attr->standard) { 4783 case DRX_STANDARD_ITU_A: 4784 case DRX_STANDARD_ITU_C: 4785 case DRX_STANDARD_PAL_SECAM_LP: 4786 case DRX_STANDARD_8VSB: 4787 select_pos_image = true; 4788 break; 4789 case DRX_STANDARD_FM: 4790 /* After IQM FS sound carrier must appear at 4 Mhz in spect. 4791 Sound carrier is already 3Mhz above centre frequency due 4792 to tuner setting so now add an extra shift of 1MHz... */ 4793 fm_frequency_shift = 1000; 4794 /*fall through */ 4795 case DRX_STANDARD_ITU_B: 4796 case DRX_STANDARD_NTSC: 4797 case DRX_STANDARD_PAL_SECAM_BG: 4798 case DRX_STANDARD_PAL_SECAM_DK: 4799 case DRX_STANDARD_PAL_SECAM_I: 4800 case DRX_STANDARD_PAL_SECAM_L: 4801 select_pos_image = false; 4802 break; 4803 default: 4804 return -EINVAL; 4805 } 4806 intermediate_freq = demod->my_common_attr->intermediate_freq; 4807 sampling_frequency = demod->my_common_attr->sys_clock_freq / 3; 4808 if (tuner_mirror) 4809 if_freq_actual = intermediate_freq + rf_freq_residual + fm_frequency_shift; 4810 else 4811 if_freq_actual = intermediate_freq - rf_freq_residual - fm_frequency_shift; 4812 if (if_freq_actual > sampling_frequency / 2) { 4813 /* adc mirrors */ 4814 adc_freq = sampling_frequency - if_freq_actual; 4815 adc_flip = true; 4816 } else { 4817 /* adc doesn't mirror */ 4818 adc_freq = if_freq_actual; 4819 adc_flip = false; 4820 } 4821 4822 frequency_shift = adc_freq; 4823 image_to_select = 4824 (bool) (rf_mirror ^ tuner_mirror ^ adc_flip ^ select_pos_image); 4825 iqm_fs_rate_ofs = frac28(frequency_shift, sampling_frequency); 4826 4827 if (image_to_select) 4828 iqm_fs_rate_ofs = ~iqm_fs_rate_ofs + 1; 4829 4830 /* Program frequency shifter with tuner offset compensation */ 4831 /* frequency_shift += tuner_freq_offset; TODO */ 4832 rc = drxdap_fasi_write_reg32(dev_addr, IQM_FS_RATE_OFS_LO__A, iqm_fs_rate_ofs, 0); 4833 if (rc != 0) { 4834 pr_err("error %d\n", rc); 4835 goto rw_error; 4836 } 4837 ext_attr->iqm_fs_rate_ofs = iqm_fs_rate_ofs; 4838 ext_attr->pos_image = (bool) (rf_mirror ^ tuner_mirror ^ select_pos_image); 4839 4840 return 0; 4841 rw_error: 4842 return rc; 4843 } 4844 4845 /* 4846 * \fn int get_acc_pkt_err() 4847 * \brief Retrieve signal strength for VSB and QAM. 4848 * \param demod Pointer to demod instance 4849 * \param packet_err Pointer to packet error 4850 * \return int. 4851 * \retval 0 sig_strength contains valid data. 4852 * \retval -EINVAL sig_strength is NULL. 4853 * \retval -EIO Erroneous data, sig_strength contains invalid data. 4854 */ 4855 #ifdef DRXJ_SIGNAL_ACCUM_ERR 4856 static int get_acc_pkt_err(struct drx_demod_instance *demod, u16 *packet_err) 4857 { 4858 int rc; 4859 static u16 pkt_err; 4860 static u16 last_pkt_err; 4861 u16 data = 0; 4862 struct drxj_data *ext_attr = NULL; 4863 struct i2c_device_addr *dev_addr = NULL; 4864 4865 ext_attr = (struct drxj_data *) demod->my_ext_attr; 4866 dev_addr = demod->my_i2c_dev_addr; 4867 4868 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, &data, 0); 4869 if (rc != 0) { 4870 pr_err("error %d\n", rc); 4871 goto rw_error; 4872 } 4873 if (ext_attr->reset_pkt_err_acc) { 4874 last_pkt_err = data; 4875 pkt_err = 0; 4876 ext_attr->reset_pkt_err_acc = false; 4877 } 4878 4879 if (data < last_pkt_err) { 4880 pkt_err += 0xffff - last_pkt_err; 4881 pkt_err += data; 4882 } else { 4883 pkt_err += (data - last_pkt_err); 4884 } 4885 *packet_err = pkt_err; 4886 last_pkt_err = data; 4887 4888 return 0; 4889 rw_error: 4890 return rc; 4891 } 4892 #endif 4893 4894 4895 /*============================================================================*/ 4896 4897 /* 4898 * \fn int set_agc_rf () 4899 * \brief Configure RF AGC 4900 * \param demod instance of demodulator. 4901 * \param agc_settings AGC configuration structure 4902 * \return int. 4903 */ 4904 static int 4905 set_agc_rf(struct drx_demod_instance *demod, struct drxj_cfg_agc *agc_settings, bool atomic) 4906 { 4907 struct i2c_device_addr *dev_addr = NULL; 4908 struct drxj_data *ext_attr = NULL; 4909 struct drxj_cfg_agc *p_agc_settings = NULL; 4910 struct drx_common_attr *common_attr = NULL; 4911 int rc; 4912 drx_write_reg16func_t scu_wr16 = NULL; 4913 drx_read_reg16func_t scu_rr16 = NULL; 4914 4915 common_attr = (struct drx_common_attr *) demod->my_common_attr; 4916 dev_addr = demod->my_i2c_dev_addr; 4917 ext_attr = (struct drxj_data *) demod->my_ext_attr; 4918 4919 if (atomic) { 4920 scu_rr16 = drxj_dap_scu_atomic_read_reg16; 4921 scu_wr16 = drxj_dap_scu_atomic_write_reg16; 4922 } else { 4923 scu_rr16 = drxj_dap_read_reg16; 4924 scu_wr16 = drxj_dap_write_reg16; 4925 } 4926 4927 /* Configure AGC only if standard is currently active */ 4928 if ((ext_attr->standard == agc_settings->standard) || 4929 (DRXJ_ISQAMSTD(ext_attr->standard) && 4930 DRXJ_ISQAMSTD(agc_settings->standard)) || 4931 (DRXJ_ISATVSTD(ext_attr->standard) && 4932 DRXJ_ISATVSTD(agc_settings->standard))) { 4933 u16 data = 0; 4934 4935 switch (agc_settings->ctrl_mode) { 4936 case DRX_AGC_CTRL_AUTO: 4937 4938 /* Enable RF AGC DAC */ 4939 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 4940 if (rc != 0) { 4941 pr_err("error %d\n", rc); 4942 goto rw_error; 4943 } 4944 data |= IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE; 4945 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 4946 if (rc != 0) { 4947 pr_err("error %d\n", rc); 4948 goto rw_error; 4949 } 4950 4951 /* Enable SCU RF AGC loop */ 4952 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 4953 if (rc != 0) { 4954 pr_err("error %d\n", rc); 4955 goto rw_error; 4956 } 4957 data &= ~SCU_RAM_AGC_KI_RF__M; 4958 if (ext_attr->standard == DRX_STANDARD_8VSB) 4959 data |= (2 << SCU_RAM_AGC_KI_RF__B); 4960 else if (DRXJ_ISQAMSTD(ext_attr->standard)) 4961 data |= (5 << SCU_RAM_AGC_KI_RF__B); 4962 else 4963 data |= (4 << SCU_RAM_AGC_KI_RF__B); 4964 4965 if (common_attr->tuner_rf_agc_pol) 4966 data |= SCU_RAM_AGC_KI_INV_RF_POL__M; 4967 else 4968 data &= ~SCU_RAM_AGC_KI_INV_RF_POL__M; 4969 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 4970 if (rc != 0) { 4971 pr_err("error %d\n", rc); 4972 goto rw_error; 4973 } 4974 4975 /* Set speed ( using complementary reduction value ) */ 4976 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI_RED__A, &data, 0); 4977 if (rc != 0) { 4978 pr_err("error %d\n", rc); 4979 goto rw_error; 4980 } 4981 data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; 4982 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI_RED__A, (~(agc_settings->speed << SCU_RAM_AGC_KI_RED_RAGC_RED__B) & SCU_RAM_AGC_KI_RED_RAGC_RED__M) | data, 0); 4983 if (rc != 0) { 4984 pr_err("error %d\n", rc); 4985 goto rw_error; 4986 } 4987 4988 if (agc_settings->standard == DRX_STANDARD_8VSB) 4989 p_agc_settings = &(ext_attr->vsb_if_agc_cfg); 4990 else if (DRXJ_ISQAMSTD(agc_settings->standard)) 4991 p_agc_settings = &(ext_attr->qam_if_agc_cfg); 4992 else if (DRXJ_ISATVSTD(agc_settings->standard)) 4993 p_agc_settings = &(ext_attr->atv_if_agc_cfg); 4994 else 4995 return -EINVAL; 4996 4997 /* Set TOP, only if IF-AGC is in AUTO mode */ 4998 if (p_agc_settings->ctrl_mode == DRX_AGC_CTRL_AUTO) { 4999 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, agc_settings->top, 0); 5000 if (rc != 0) { 5001 pr_err("error %d\n", rc); 5002 goto rw_error; 5003 } 5004 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, agc_settings->top, 0); 5005 if (rc != 0) { 5006 pr_err("error %d\n", rc); 5007 goto rw_error; 5008 } 5009 } 5010 5011 /* Cut-Off current */ 5012 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_RF_IACCU_HI_CO__A, agc_settings->cut_off_current, 0); 5013 if (rc != 0) { 5014 pr_err("error %d\n", rc); 5015 goto rw_error; 5016 } 5017 break; 5018 case DRX_AGC_CTRL_USER: 5019 5020 /* Enable RF AGC DAC */ 5021 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5022 if (rc != 0) { 5023 pr_err("error %d\n", rc); 5024 goto rw_error; 5025 } 5026 data |= IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE; 5027 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5028 if (rc != 0) { 5029 pr_err("error %d\n", rc); 5030 goto rw_error; 5031 } 5032 5033 /* Disable SCU RF AGC loop */ 5034 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5035 if (rc != 0) { 5036 pr_err("error %d\n", rc); 5037 goto rw_error; 5038 } 5039 data &= ~SCU_RAM_AGC_KI_RF__M; 5040 if (common_attr->tuner_rf_agc_pol) 5041 data |= SCU_RAM_AGC_KI_INV_RF_POL__M; 5042 else 5043 data &= ~SCU_RAM_AGC_KI_INV_RF_POL__M; 5044 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5045 if (rc != 0) { 5046 pr_err("error %d\n", rc); 5047 goto rw_error; 5048 } 5049 5050 /* Write value to output pin */ 5051 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_RF_IACCU_HI__A, agc_settings->output_level, 0); 5052 if (rc != 0) { 5053 pr_err("error %d\n", rc); 5054 goto rw_error; 5055 } 5056 break; 5057 case DRX_AGC_CTRL_OFF: 5058 5059 /* Disable RF AGC DAC */ 5060 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5061 if (rc != 0) { 5062 pr_err("error %d\n", rc); 5063 goto rw_error; 5064 } 5065 data &= (~IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE); 5066 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5067 if (rc != 0) { 5068 pr_err("error %d\n", rc); 5069 goto rw_error; 5070 } 5071 5072 /* Disable SCU RF AGC loop */ 5073 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5074 if (rc != 0) { 5075 pr_err("error %d\n", rc); 5076 goto rw_error; 5077 } 5078 data &= ~SCU_RAM_AGC_KI_RF__M; 5079 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5080 if (rc != 0) { 5081 pr_err("error %d\n", rc); 5082 goto rw_error; 5083 } 5084 break; 5085 default: 5086 return -EINVAL; 5087 } /* switch ( agcsettings->ctrl_mode ) */ 5088 } 5089 5090 /* Store rf agc settings */ 5091 switch (agc_settings->standard) { 5092 case DRX_STANDARD_8VSB: 5093 ext_attr->vsb_rf_agc_cfg = *agc_settings; 5094 break; 5095 #ifndef DRXJ_VSB_ONLY 5096 case DRX_STANDARD_ITU_A: 5097 case DRX_STANDARD_ITU_B: 5098 case DRX_STANDARD_ITU_C: 5099 ext_attr->qam_rf_agc_cfg = *agc_settings; 5100 break; 5101 #endif 5102 default: 5103 return -EIO; 5104 } 5105 5106 return 0; 5107 rw_error: 5108 return rc; 5109 } 5110 5111 /* 5112 * \fn int set_agc_if () 5113 * \brief Configure If AGC 5114 * \param demod instance of demodulator. 5115 * \param agc_settings AGC configuration structure 5116 * \return int. 5117 */ 5118 static int 5119 set_agc_if(struct drx_demod_instance *demod, struct drxj_cfg_agc *agc_settings, bool atomic) 5120 { 5121 struct i2c_device_addr *dev_addr = NULL; 5122 struct drxj_data *ext_attr = NULL; 5123 struct drxj_cfg_agc *p_agc_settings = NULL; 5124 struct drx_common_attr *common_attr = NULL; 5125 drx_write_reg16func_t scu_wr16 = NULL; 5126 drx_read_reg16func_t scu_rr16 = NULL; 5127 int rc; 5128 5129 common_attr = (struct drx_common_attr *) demod->my_common_attr; 5130 dev_addr = demod->my_i2c_dev_addr; 5131 ext_attr = (struct drxj_data *) demod->my_ext_attr; 5132 5133 if (atomic) { 5134 scu_rr16 = drxj_dap_scu_atomic_read_reg16; 5135 scu_wr16 = drxj_dap_scu_atomic_write_reg16; 5136 } else { 5137 scu_rr16 = drxj_dap_read_reg16; 5138 scu_wr16 = drxj_dap_write_reg16; 5139 } 5140 5141 /* Configure AGC only if standard is currently active */ 5142 if ((ext_attr->standard == agc_settings->standard) || 5143 (DRXJ_ISQAMSTD(ext_attr->standard) && 5144 DRXJ_ISQAMSTD(agc_settings->standard)) || 5145 (DRXJ_ISATVSTD(ext_attr->standard) && 5146 DRXJ_ISATVSTD(agc_settings->standard))) { 5147 u16 data = 0; 5148 5149 switch (agc_settings->ctrl_mode) { 5150 case DRX_AGC_CTRL_AUTO: 5151 /* Enable IF AGC DAC */ 5152 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5153 if (rc != 0) { 5154 pr_err("error %d\n", rc); 5155 goto rw_error; 5156 } 5157 data |= IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE; 5158 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5159 if (rc != 0) { 5160 pr_err("error %d\n", rc); 5161 goto rw_error; 5162 } 5163 5164 /* Enable SCU IF AGC loop */ 5165 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5166 if (rc != 0) { 5167 pr_err("error %d\n", rc); 5168 goto rw_error; 5169 } 5170 data &= ~SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5171 data &= ~SCU_RAM_AGC_KI_IF__M; 5172 if (ext_attr->standard == DRX_STANDARD_8VSB) 5173 data |= (3 << SCU_RAM_AGC_KI_IF__B); 5174 else if (DRXJ_ISQAMSTD(ext_attr->standard)) 5175 data |= (6 << SCU_RAM_AGC_KI_IF__B); 5176 else 5177 data |= (5 << SCU_RAM_AGC_KI_IF__B); 5178 5179 if (common_attr->tuner_if_agc_pol) 5180 data |= SCU_RAM_AGC_KI_INV_IF_POL__M; 5181 else 5182 data &= ~SCU_RAM_AGC_KI_INV_IF_POL__M; 5183 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5184 if (rc != 0) { 5185 pr_err("error %d\n", rc); 5186 goto rw_error; 5187 } 5188 5189 /* Set speed (using complementary reduction value) */ 5190 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI_RED__A, &data, 0); 5191 if (rc != 0) { 5192 pr_err("error %d\n", rc); 5193 goto rw_error; 5194 } 5195 data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; 5196 rc = (*scu_wr16) (dev_addr, SCU_RAM_AGC_KI_RED__A, (~(agc_settings->speed << SCU_RAM_AGC_KI_RED_IAGC_RED__B) & SCU_RAM_AGC_KI_RED_IAGC_RED__M) | data, 0); 5197 if (rc != 0) { 5198 pr_err("error %d\n", rc); 5199 goto rw_error; 5200 } 5201 5202 if (agc_settings->standard == DRX_STANDARD_8VSB) 5203 p_agc_settings = &(ext_attr->vsb_rf_agc_cfg); 5204 else if (DRXJ_ISQAMSTD(agc_settings->standard)) 5205 p_agc_settings = &(ext_attr->qam_rf_agc_cfg); 5206 else if (DRXJ_ISATVSTD(agc_settings->standard)) 5207 p_agc_settings = &(ext_attr->atv_rf_agc_cfg); 5208 else 5209 return -EINVAL; 5210 5211 /* Restore TOP */ 5212 if (p_agc_settings->ctrl_mode == DRX_AGC_CTRL_AUTO) { 5213 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, p_agc_settings->top, 0); 5214 if (rc != 0) { 5215 pr_err("error %d\n", rc); 5216 goto rw_error; 5217 } 5218 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, p_agc_settings->top, 0); 5219 if (rc != 0) { 5220 pr_err("error %d\n", rc); 5221 goto rw_error; 5222 } 5223 } else { 5224 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, 0, 0); 5225 if (rc != 0) { 5226 pr_err("error %d\n", rc); 5227 goto rw_error; 5228 } 5229 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, 0, 0); 5230 if (rc != 0) { 5231 pr_err("error %d\n", rc); 5232 goto rw_error; 5233 } 5234 } 5235 break; 5236 5237 case DRX_AGC_CTRL_USER: 5238 5239 /* Enable IF AGC DAC */ 5240 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5241 if (rc != 0) { 5242 pr_err("error %d\n", rc); 5243 goto rw_error; 5244 } 5245 data |= IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE; 5246 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5247 if (rc != 0) { 5248 pr_err("error %d\n", rc); 5249 goto rw_error; 5250 } 5251 5252 /* Disable SCU IF AGC loop */ 5253 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5254 if (rc != 0) { 5255 pr_err("error %d\n", rc); 5256 goto rw_error; 5257 } 5258 data &= ~SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5259 data |= SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5260 if (common_attr->tuner_if_agc_pol) 5261 data |= SCU_RAM_AGC_KI_INV_IF_POL__M; 5262 else 5263 data &= ~SCU_RAM_AGC_KI_INV_IF_POL__M; 5264 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5265 if (rc != 0) { 5266 pr_err("error %d\n", rc); 5267 goto rw_error; 5268 } 5269 5270 /* Write value to output pin */ 5271 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, agc_settings->output_level, 0); 5272 if (rc != 0) { 5273 pr_err("error %d\n", rc); 5274 goto rw_error; 5275 } 5276 break; 5277 5278 case DRX_AGC_CTRL_OFF: 5279 5280 /* Disable If AGC DAC */ 5281 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5282 if (rc != 0) { 5283 pr_err("error %d\n", rc); 5284 goto rw_error; 5285 } 5286 data &= (~IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE); 5287 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5288 if (rc != 0) { 5289 pr_err("error %d\n", rc); 5290 goto rw_error; 5291 } 5292 5293 /* Disable SCU IF AGC loop */ 5294 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5295 if (rc != 0) { 5296 pr_err("error %d\n", rc); 5297 goto rw_error; 5298 } 5299 data &= ~SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5300 data |= SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5301 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5302 if (rc != 0) { 5303 pr_err("error %d\n", rc); 5304 goto rw_error; 5305 } 5306 break; 5307 default: 5308 return -EINVAL; 5309 } /* switch ( agcsettings->ctrl_mode ) */ 5310 5311 /* always set the top to support configurations without if-loop */ 5312 rc = (*scu_wr16) (dev_addr, SCU_RAM_AGC_INGAIN_TGT_MIN__A, agc_settings->top, 0); 5313 if (rc != 0) { 5314 pr_err("error %d\n", rc); 5315 goto rw_error; 5316 } 5317 } 5318 5319 /* Store if agc settings */ 5320 switch (agc_settings->standard) { 5321 case DRX_STANDARD_8VSB: 5322 ext_attr->vsb_if_agc_cfg = *agc_settings; 5323 break; 5324 #ifndef DRXJ_VSB_ONLY 5325 case DRX_STANDARD_ITU_A: 5326 case DRX_STANDARD_ITU_B: 5327 case DRX_STANDARD_ITU_C: 5328 ext_attr->qam_if_agc_cfg = *agc_settings; 5329 break; 5330 #endif 5331 default: 5332 return -EIO; 5333 } 5334 5335 return 0; 5336 rw_error: 5337 return rc; 5338 } 5339 5340 /* 5341 * \fn int set_iqm_af () 5342 * \brief Configure IQM AF registers 5343 * \param demod instance of demodulator. 5344 * \param active 5345 * \return int. 5346 */ 5347 static int set_iqm_af(struct drx_demod_instance *demod, bool active) 5348 { 5349 u16 data = 0; 5350 struct i2c_device_addr *dev_addr = NULL; 5351 int rc; 5352 5353 dev_addr = demod->my_i2c_dev_addr; 5354 5355 /* Configure IQM */ 5356 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5357 if (rc != 0) { 5358 pr_err("error %d\n", rc); 5359 goto rw_error; 5360 } 5361 if (!active) 5362 data &= ((~IQM_AF_STDBY_STDBY_ADC_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_AMP_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_PD_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE)); 5363 else 5364 data |= (IQM_AF_STDBY_STDBY_ADC_A2_ACTIVE | IQM_AF_STDBY_STDBY_AMP_A2_ACTIVE | IQM_AF_STDBY_STDBY_PD_A2_ACTIVE | IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE | IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE); 5365 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5366 if (rc != 0) { 5367 pr_err("error %d\n", rc); 5368 goto rw_error; 5369 } 5370 5371 return 0; 5372 rw_error: 5373 return rc; 5374 } 5375 5376 /*============================================================================*/ 5377 /*== END 8VSB & QAM COMMON DATAPATH FUNCTIONS ==*/ 5378 /*============================================================================*/ 5379 5380 /*============================================================================*/ 5381 /*============================================================================*/ 5382 /*== 8VSB DATAPATH FUNCTIONS ==*/ 5383 /*============================================================================*/ 5384 /*============================================================================*/ 5385 5386 /* 5387 * \fn int power_down_vsb () 5388 * \brief Powr down QAM related blocks. 5389 * \param demod instance of demodulator. 5390 * \param channel pointer to channel data. 5391 * \return int. 5392 */ 5393 static int power_down_vsb(struct drx_demod_instance *demod, bool primary) 5394 { 5395 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 5396 struct drxjscu_cmd cmd_scu = { /* command */ 0, 5397 /* parameter_len */ 0, 5398 /* result_len */ 0, 5399 /* *parameter */ NULL, 5400 /* *result */ NULL 5401 }; 5402 struct drx_cfg_mpeg_output cfg_mpeg_output; 5403 int rc; 5404 u16 cmd_result = 0; 5405 5406 /* 5407 STOP demodulator 5408 reset of FEC and VSB HW 5409 */ 5410 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB | 5411 SCU_RAM_COMMAND_CMD_DEMOD_STOP; 5412 cmd_scu.parameter_len = 0; 5413 cmd_scu.result_len = 1; 5414 cmd_scu.parameter = NULL; 5415 cmd_scu.result = &cmd_result; 5416 rc = scu_command(dev_addr, &cmd_scu); 5417 if (rc != 0) { 5418 pr_err("error %d\n", rc); 5419 goto rw_error; 5420 } 5421 5422 /* stop all comm_exec */ 5423 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 5424 if (rc != 0) { 5425 pr_err("error %d\n", rc); 5426 goto rw_error; 5427 } 5428 rc = drxj_dap_write_reg16(dev_addr, VSB_COMM_EXEC__A, VSB_COMM_EXEC_STOP, 0); 5429 if (rc != 0) { 5430 pr_err("error %d\n", rc); 5431 goto rw_error; 5432 } 5433 if (primary) { 5434 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_STOP, 0); 5435 if (rc != 0) { 5436 pr_err("error %d\n", rc); 5437 goto rw_error; 5438 } 5439 rc = set_iqm_af(demod, false); 5440 if (rc != 0) { 5441 pr_err("error %d\n", rc); 5442 goto rw_error; 5443 } 5444 } else { 5445 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 5446 if (rc != 0) { 5447 pr_err("error %d\n", rc); 5448 goto rw_error; 5449 } 5450 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 5451 if (rc != 0) { 5452 pr_err("error %d\n", rc); 5453 goto rw_error; 5454 } 5455 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 5456 if (rc != 0) { 5457 pr_err("error %d\n", rc); 5458 goto rw_error; 5459 } 5460 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 5461 if (rc != 0) { 5462 pr_err("error %d\n", rc); 5463 goto rw_error; 5464 } 5465 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 5466 if (rc != 0) { 5467 pr_err("error %d\n", rc); 5468 goto rw_error; 5469 } 5470 } 5471 5472 cfg_mpeg_output.enable_mpeg_output = false; 5473 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 5474 if (rc != 0) { 5475 pr_err("error %d\n", rc); 5476 goto rw_error; 5477 } 5478 5479 return 0; 5480 rw_error: 5481 return rc; 5482 } 5483 5484 /* 5485 * \fn int set_vsb_leak_n_gain () 5486 * \brief Set ATSC demod. 5487 * \param demod instance of demodulator. 5488 * \return int. 5489 */ 5490 static int set_vsb_leak_n_gain(struct drx_demod_instance *demod) 5491 { 5492 struct i2c_device_addr *dev_addr = NULL; 5493 int rc; 5494 5495 static const u8 vsb_ffe_leak_gain_ram0[] = { 5496 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO1 */ 5497 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO2 */ 5498 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO3 */ 5499 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO4 */ 5500 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO5 */ 5501 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO6 */ 5502 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO7 */ 5503 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO8 */ 5504 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO9 */ 5505 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO10 */ 5506 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO11 */ 5507 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO12 */ 5508 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO1 */ 5509 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO2 */ 5510 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO3 */ 5511 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO4 */ 5512 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO5 */ 5513 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO6 */ 5514 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO7 */ 5515 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO8 */ 5516 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO9 */ 5517 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO10 */ 5518 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO11 */ 5519 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO12 */ 5520 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO1 */ 5521 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO2 */ 5522 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO3 */ 5523 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO4 */ 5524 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO5 */ 5525 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO6 */ 5526 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO7 */ 5527 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO8 */ 5528 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO9 */ 5529 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO10 */ 5530 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO11 */ 5531 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO12 */ 5532 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO1 */ 5533 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO2 */ 5534 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO3 */ 5535 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO4 */ 5536 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO5 */ 5537 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO6 */ 5538 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO7 */ 5539 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO8 */ 5540 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO9 */ 5541 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO10 */ 5542 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO11 */ 5543 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO12 */ 5544 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO1 */ 5545 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO2 */ 5546 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO3 */ 5547 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO4 */ 5548 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO5 */ 5549 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO6 */ 5550 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO7 */ 5551 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO8 */ 5552 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO9 */ 5553 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO10 */ 5554 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO11 */ 5555 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO12 */ 5556 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO1 */ 5557 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO2 */ 5558 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO3 */ 5559 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO4 */ 5560 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO5 */ 5561 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO6 */ 5562 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO7 */ 5563 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO8 */ 5564 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO9 */ 5565 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO10 */ 5566 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO11 */ 5567 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO12 */ 5568 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO1 */ 5569 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO2 */ 5570 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO3 */ 5571 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO4 */ 5572 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO5 */ 5573 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO6 */ 5574 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO7 */ 5575 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO8 */ 5576 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO9 */ 5577 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO10 */ 5578 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO11 */ 5579 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO12 */ 5580 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO1 */ 5581 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO2 */ 5582 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO3 */ 5583 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO4 */ 5584 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO5 */ 5585 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO6 */ 5586 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO7 */ 5587 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO8 */ 5588 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO9 */ 5589 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO10 */ 5590 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO11 */ 5591 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO12 */ 5592 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO1 */ 5593 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO2 */ 5594 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO3 */ 5595 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO4 */ 5596 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO5 */ 5597 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO6 */ 5598 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO7 */ 5599 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO8 */ 5600 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO9 */ 5601 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO10 */ 5602 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO11 */ 5603 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO12 */ 5604 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN1 */ 5605 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN2 */ 5606 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN3 */ 5607 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN4 */ 5608 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN5 */ 5609 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN6 */ 5610 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN7 */ 5611 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN8 */ 5612 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN9 */ 5613 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN10 */ 5614 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN11 */ 5615 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN12 */ 5616 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN1 */ 5617 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN2 */ 5618 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN3 */ 5619 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN4 */ 5620 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN5 */ 5621 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN6 */ 5622 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN7 */ 5623 DRXJ_16TO8(0x1010) /* FIRRCA1GAIN8 */ 5624 }; 5625 5626 static const u8 vsb_ffe_leak_gain_ram1[] = { 5627 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN9 */ 5628 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN10 */ 5629 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN11 */ 5630 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN12 */ 5631 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN1 */ 5632 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN2 */ 5633 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN3 */ 5634 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN4 */ 5635 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN5 */ 5636 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN6 */ 5637 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN7 */ 5638 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN8 */ 5639 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN9 */ 5640 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN10 */ 5641 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN11 */ 5642 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN12 */ 5643 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN1 */ 5644 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN2 */ 5645 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN3 */ 5646 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN4 */ 5647 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN5 */ 5648 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN6 */ 5649 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN7 */ 5650 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN8 */ 5651 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN9 */ 5652 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN10 */ 5653 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN11 */ 5654 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN12 */ 5655 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN1 */ 5656 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN2 */ 5657 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN3 */ 5658 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN4 */ 5659 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN5 */ 5660 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN6 */ 5661 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN7 */ 5662 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN8 */ 5663 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN9 */ 5664 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN10 */ 5665 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN11 */ 5666 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN12 */ 5667 DRXJ_16TO8(0x001f), /* DFETRAINLKRATIO */ 5668 DRXJ_16TO8(0x01ff), /* DFERCA1TRAINLKRATIO */ 5669 DRXJ_16TO8(0x01ff), /* DFERCA1DATALKRATIO */ 5670 DRXJ_16TO8(0x004f), /* DFERCA2TRAINLKRATIO */ 5671 DRXJ_16TO8(0x004f), /* DFERCA2DATALKRATIO */ 5672 DRXJ_16TO8(0x01ff), /* DFEDDM1TRAINLKRATIO */ 5673 DRXJ_16TO8(0x01ff), /* DFEDDM1DATALKRATIO */ 5674 DRXJ_16TO8(0x0352), /* DFEDDM2TRAINLKRATIO */ 5675 DRXJ_16TO8(0x0352), /* DFEDDM2DATALKRATIO */ 5676 DRXJ_16TO8(0x0000), /* DFETRAINGAIN */ 5677 DRXJ_16TO8(0x2020), /* DFERCA1GAIN */ 5678 DRXJ_16TO8(0x1010), /* DFERCA2GAIN */ 5679 DRXJ_16TO8(0x1818), /* DFEDDM1GAIN */ 5680 DRXJ_16TO8(0x1212) /* DFEDDM2GAIN */ 5681 }; 5682 5683 dev_addr = demod->my_i2c_dev_addr; 5684 rc = drxdap_fasi_write_block(dev_addr, VSB_SYSCTRL_RAM0_FFETRAINLKRATIO1__A, sizeof(vsb_ffe_leak_gain_ram0), ((u8 *)vsb_ffe_leak_gain_ram0), 0); 5685 if (rc != 0) { 5686 pr_err("error %d\n", rc); 5687 goto rw_error; 5688 } 5689 rc = drxdap_fasi_write_block(dev_addr, VSB_SYSCTRL_RAM1_FIRRCA1GAIN9__A, sizeof(vsb_ffe_leak_gain_ram1), ((u8 *)vsb_ffe_leak_gain_ram1), 0); 5690 if (rc != 0) { 5691 pr_err("error %d\n", rc); 5692 goto rw_error; 5693 } 5694 5695 return 0; 5696 rw_error: 5697 return rc; 5698 } 5699 5700 /* 5701 * \fn int set_vsb() 5702 * \brief Set 8VSB demod. 5703 * \param demod instance of demodulator. 5704 * \return int. 5705 * 5706 */ 5707 static int set_vsb(struct drx_demod_instance *demod) 5708 { 5709 struct i2c_device_addr *dev_addr = NULL; 5710 int rc; 5711 struct drx_common_attr *common_attr = NULL; 5712 struct drxjscu_cmd cmd_scu; 5713 struct drxj_data *ext_attr = NULL; 5714 u16 cmd_result = 0; 5715 u16 cmd_param = 0; 5716 static const u8 vsb_taps_re[] = { 5717 DRXJ_16TO8(-2), /* re0 */ 5718 DRXJ_16TO8(4), /* re1 */ 5719 DRXJ_16TO8(1), /* re2 */ 5720 DRXJ_16TO8(-4), /* re3 */ 5721 DRXJ_16TO8(1), /* re4 */ 5722 DRXJ_16TO8(4), /* re5 */ 5723 DRXJ_16TO8(-3), /* re6 */ 5724 DRXJ_16TO8(-3), /* re7 */ 5725 DRXJ_16TO8(6), /* re8 */ 5726 DRXJ_16TO8(1), /* re9 */ 5727 DRXJ_16TO8(-9), /* re10 */ 5728 DRXJ_16TO8(3), /* re11 */ 5729 DRXJ_16TO8(12), /* re12 */ 5730 DRXJ_16TO8(-9), /* re13 */ 5731 DRXJ_16TO8(-15), /* re14 */ 5732 DRXJ_16TO8(17), /* re15 */ 5733 DRXJ_16TO8(19), /* re16 */ 5734 DRXJ_16TO8(-29), /* re17 */ 5735 DRXJ_16TO8(-22), /* re18 */ 5736 DRXJ_16TO8(45), /* re19 */ 5737 DRXJ_16TO8(25), /* re20 */ 5738 DRXJ_16TO8(-70), /* re21 */ 5739 DRXJ_16TO8(-28), /* re22 */ 5740 DRXJ_16TO8(111), /* re23 */ 5741 DRXJ_16TO8(30), /* re24 */ 5742 DRXJ_16TO8(-201), /* re25 */ 5743 DRXJ_16TO8(-31), /* re26 */ 5744 DRXJ_16TO8(629) /* re27 */ 5745 }; 5746 5747 dev_addr = demod->my_i2c_dev_addr; 5748 common_attr = (struct drx_common_attr *) demod->my_common_attr; 5749 ext_attr = (struct drxj_data *) demod->my_ext_attr; 5750 5751 /* stop all comm_exec */ 5752 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 5753 if (rc != 0) { 5754 pr_err("error %d\n", rc); 5755 goto rw_error; 5756 } 5757 rc = drxj_dap_write_reg16(dev_addr, VSB_COMM_EXEC__A, VSB_COMM_EXEC_STOP, 0); 5758 if (rc != 0) { 5759 pr_err("error %d\n", rc); 5760 goto rw_error; 5761 } 5762 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 5763 if (rc != 0) { 5764 pr_err("error %d\n", rc); 5765 goto rw_error; 5766 } 5767 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 5768 if (rc != 0) { 5769 pr_err("error %d\n", rc); 5770 goto rw_error; 5771 } 5772 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 5773 if (rc != 0) { 5774 pr_err("error %d\n", rc); 5775 goto rw_error; 5776 } 5777 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 5778 if (rc != 0) { 5779 pr_err("error %d\n", rc); 5780 goto rw_error; 5781 } 5782 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 5783 if (rc != 0) { 5784 pr_err("error %d\n", rc); 5785 goto rw_error; 5786 } 5787 5788 /* reset demodulator */ 5789 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB 5790 | SCU_RAM_COMMAND_CMD_DEMOD_RESET; 5791 cmd_scu.parameter_len = 0; 5792 cmd_scu.result_len = 1; 5793 cmd_scu.parameter = NULL; 5794 cmd_scu.result = &cmd_result; 5795 rc = scu_command(dev_addr, &cmd_scu); 5796 if (rc != 0) { 5797 pr_err("error %d\n", rc); 5798 goto rw_error; 5799 } 5800 5801 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_DCF_BYPASS__A, 1, 0); 5802 if (rc != 0) { 5803 pr_err("error %d\n", rc); 5804 goto rw_error; 5805 } 5806 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_ADJ_SEL__A, IQM_FS_ADJ_SEL_B_VSB, 0); 5807 if (rc != 0) { 5808 pr_err("error %d\n", rc); 5809 goto rw_error; 5810 } 5811 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_ADJ_SEL__A, IQM_RC_ADJ_SEL_B_VSB, 0); 5812 if (rc != 0) { 5813 pr_err("error %d\n", rc); 5814 goto rw_error; 5815 } 5816 ext_attr->iqm_rc_rate_ofs = 0x00AD0D79; 5817 rc = drxdap_fasi_write_reg32(dev_addr, IQM_RC_RATE_OFS_LO__A, ext_attr->iqm_rc_rate_ofs, 0); 5818 if (rc != 0) { 5819 pr_err("error %d\n", rc); 5820 goto rw_error; 5821 } 5822 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CFAGC_GAINSHIFT__A, 4, 0); 5823 if (rc != 0) { 5824 pr_err("error %d\n", rc); 5825 goto rw_error; 5826 } 5827 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN1TRK__A, 1, 0); 5828 if (rc != 0) { 5829 pr_err("error %d\n", rc); 5830 goto rw_error; 5831 } 5832 5833 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_CROUT_ENA__A, 1, 0); 5834 if (rc != 0) { 5835 pr_err("error %d\n", rc); 5836 goto rw_error; 5837 } 5838 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_STRETCH__A, 28, 0); 5839 if (rc != 0) { 5840 pr_err("error %d\n", rc); 5841 goto rw_error; 5842 } 5843 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_ACTIVE__A, 0, 0); 5844 if (rc != 0) { 5845 pr_err("error %d\n", rc); 5846 goto rw_error; 5847 } 5848 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SYMMETRIC__A, 0, 0); 5849 if (rc != 0) { 5850 pr_err("error %d\n", rc); 5851 goto rw_error; 5852 } 5853 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_MIDTAP__A, 3, 0); 5854 if (rc != 0) { 5855 pr_err("error %d\n", rc); 5856 goto rw_error; 5857 } 5858 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_OUT_ENA__A, IQM_CF_OUT_ENA_VSB__M, 0); 5859 if (rc != 0) { 5860 pr_err("error %d\n", rc); 5861 goto rw_error; 5862 } 5863 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE__A, 1393, 0); 5864 if (rc != 0) { 5865 pr_err("error %d\n", rc); 5866 goto rw_error; 5867 } 5868 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE_SH__A, 0, 0); 5869 if (rc != 0) { 5870 pr_err("error %d\n", rc); 5871 goto rw_error; 5872 } 5873 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_POW_MEAS_LEN__A, 1, 0); 5874 if (rc != 0) { 5875 pr_err("error %d\n", rc); 5876 goto rw_error; 5877 } 5878 5879 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(vsb_taps_re), ((u8 *)vsb_taps_re), 0); 5880 if (rc != 0) { 5881 pr_err("error %d\n", rc); 5882 goto rw_error; 5883 } 5884 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(vsb_taps_re), ((u8 *)vsb_taps_re), 0); 5885 if (rc != 0) { 5886 pr_err("error %d\n", rc); 5887 goto rw_error; 5888 } 5889 5890 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_BNTHRESH__A, 330, 0); 5891 if (rc != 0) { 5892 pr_err("error %d\n", rc); 5893 goto rw_error; 5894 } /* set higher threshold */ 5895 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CLPLASTNUM__A, 90, 0); 5896 if (rc != 0) { 5897 pr_err("error %d\n", rc); 5898 goto rw_error; 5899 } /* burst detection on */ 5900 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_RCA1__A, 0x0042, 0); 5901 if (rc != 0) { 5902 pr_err("error %d\n", rc); 5903 goto rw_error; 5904 } /* drop thresholds by 1 dB */ 5905 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_RCA2__A, 0x0053, 0); 5906 if (rc != 0) { 5907 pr_err("error %d\n", rc); 5908 goto rw_error; 5909 } /* drop thresholds by 2 dB */ 5910 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_EQCTRL__A, 0x1, 0); 5911 if (rc != 0) { 5912 pr_err("error %d\n", rc); 5913 goto rw_error; 5914 } /* cma on */ 5915 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_GPIO__A, 0, 0); 5916 if (rc != 0) { 5917 pr_err("error %d\n", rc); 5918 goto rw_error; 5919 } /* GPIO */ 5920 5921 /* Initialize the FEC Subsystem */ 5922 rc = drxj_dap_write_reg16(dev_addr, FEC_TOP_ANNEX__A, FEC_TOP_ANNEX_D, 0); 5923 if (rc != 0) { 5924 pr_err("error %d\n", rc); 5925 goto rw_error; 5926 } 5927 { 5928 u16 fec_oc_snc_mode = 0; 5929 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode, 0); 5930 if (rc != 0) { 5931 pr_err("error %d\n", rc); 5932 goto rw_error; 5933 } 5934 /* output data even when not locked */ 5935 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_MODE__A, fec_oc_snc_mode | FEC_OC_SNC_MODE_UNLOCK_ENABLE__M, 0); 5936 if (rc != 0) { 5937 pr_err("error %d\n", rc); 5938 goto rw_error; 5939 } 5940 } 5941 5942 /* set clip */ 5943 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_LEN__A, 0, 0); 5944 if (rc != 0) { 5945 pr_err("error %d\n", rc); 5946 goto rw_error; 5947 } 5948 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_TH__A, 470, 0); 5949 if (rc != 0) { 5950 pr_err("error %d\n", rc); 5951 goto rw_error; 5952 } 5953 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_SNS_LEN__A, 0, 0); 5954 if (rc != 0) { 5955 pr_err("error %d\n", rc); 5956 goto rw_error; 5957 } 5958 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_PT__A, 0xD4, 0); 5959 if (rc != 0) { 5960 pr_err("error %d\n", rc); 5961 goto rw_error; 5962 } 5963 /* no transparent, no A&C framing; parity is set in mpegoutput */ 5964 { 5965 u16 fec_oc_reg_mode = 0; 5966 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_MODE__A, &fec_oc_reg_mode, 0); 5967 if (rc != 0) { 5968 pr_err("error %d\n", rc); 5969 goto rw_error; 5970 } 5971 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_MODE__A, fec_oc_reg_mode & (~(FEC_OC_MODE_TRANSPARENT__M | FEC_OC_MODE_CLEAR__M | FEC_OC_MODE_RETAIN_FRAMING__M)), 0); 5972 if (rc != 0) { 5973 pr_err("error %d\n", rc); 5974 goto rw_error; 5975 } 5976 } 5977 5978 rc = drxj_dap_write_reg16(dev_addr, FEC_DI_TIMEOUT_LO__A, 0, 0); 5979 if (rc != 0) { 5980 pr_err("error %d\n", rc); 5981 goto rw_error; 5982 } /* timeout counter for restarting */ 5983 rc = drxj_dap_write_reg16(dev_addr, FEC_DI_TIMEOUT_HI__A, 3, 0); 5984 if (rc != 0) { 5985 pr_err("error %d\n", rc); 5986 goto rw_error; 5987 } 5988 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MODE__A, 0, 0); 5989 if (rc != 0) { 5990 pr_err("error %d\n", rc); 5991 goto rw_error; 5992 } /* bypass disabled */ 5993 /* initialize RS packet error measurement parameters */ 5994 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PERIOD__A, FEC_RS_MEASUREMENT_PERIOD, 0); 5995 if (rc != 0) { 5996 pr_err("error %d\n", rc); 5997 goto rw_error; 5998 } 5999 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PRESCALE__A, FEC_RS_MEASUREMENT_PRESCALE, 0); 6000 if (rc != 0) { 6001 pr_err("error %d\n", rc); 6002 goto rw_error; 6003 } 6004 6005 /* init measurement period of MER/SER */ 6006 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_MEASUREMENT_PERIOD__A, VSB_TOP_MEASUREMENT_PERIOD, 0); 6007 if (rc != 0) { 6008 pr_err("error %d\n", rc); 6009 goto rw_error; 6010 } 6011 rc = drxdap_fasi_write_reg32(dev_addr, SCU_RAM_FEC_ACCUM_CW_CORRECTED_LO__A, 0, 0); 6012 if (rc != 0) { 6013 pr_err("error %d\n", rc); 6014 goto rw_error; 6015 } 6016 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_MEAS_COUNT__A, 0, 0); 6017 if (rc != 0) { 6018 pr_err("error %d\n", rc); 6019 goto rw_error; 6020 } 6021 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0, 0); 6022 if (rc != 0) { 6023 pr_err("error %d\n", rc); 6024 goto rw_error; 6025 } 6026 6027 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CKGN1TRK__A, 128, 0); 6028 if (rc != 0) { 6029 pr_err("error %d\n", rc); 6030 goto rw_error; 6031 } 6032 /* B-Input to ADC, PGA+filter in standby */ 6033 if (!ext_attr->has_lna) { 6034 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AMUX__A, 0x02, 0); 6035 if (rc != 0) { 6036 pr_err("error %d\n", rc); 6037 goto rw_error; 6038 } 6039 } 6040 6041 /* turn on IQMAF. It has to be in front of setAgc**() */ 6042 rc = set_iqm_af(demod, true); 6043 if (rc != 0) { 6044 pr_err("error %d\n", rc); 6045 goto rw_error; 6046 } 6047 rc = adc_synchronization(demod); 6048 if (rc != 0) { 6049 pr_err("error %d\n", rc); 6050 goto rw_error; 6051 } 6052 6053 rc = init_agc(demod); 6054 if (rc != 0) { 6055 pr_err("error %d\n", rc); 6056 goto rw_error; 6057 } 6058 rc = set_agc_if(demod, &(ext_attr->vsb_if_agc_cfg), false); 6059 if (rc != 0) { 6060 pr_err("error %d\n", rc); 6061 goto rw_error; 6062 } 6063 rc = set_agc_rf(demod, &(ext_attr->vsb_rf_agc_cfg), false); 6064 if (rc != 0) { 6065 pr_err("error %d\n", rc); 6066 goto rw_error; 6067 } 6068 { 6069 /* TODO fix this, store a struct drxj_cfg_afe_gain structure in struct drxj_data instead 6070 of only the gain */ 6071 struct drxj_cfg_afe_gain vsb_pga_cfg = { DRX_STANDARD_8VSB, 0 }; 6072 6073 vsb_pga_cfg.gain = ext_attr->vsb_pga_cfg; 6074 rc = ctrl_set_cfg_afe_gain(demod, &vsb_pga_cfg); 6075 if (rc != 0) { 6076 pr_err("error %d\n", rc); 6077 goto rw_error; 6078 } 6079 } 6080 rc = ctrl_set_cfg_pre_saw(demod, &(ext_attr->vsb_pre_saw_cfg)); 6081 if (rc != 0) { 6082 pr_err("error %d\n", rc); 6083 goto rw_error; 6084 } 6085 6086 /* Mpeg output has to be in front of FEC active */ 6087 rc = set_mpegtei_handling(demod); 6088 if (rc != 0) { 6089 pr_err("error %d\n", rc); 6090 goto rw_error; 6091 } 6092 rc = bit_reverse_mpeg_output(demod); 6093 if (rc != 0) { 6094 pr_err("error %d\n", rc); 6095 goto rw_error; 6096 } 6097 rc = set_mpeg_start_width(demod); 6098 if (rc != 0) { 6099 pr_err("error %d\n", rc); 6100 goto rw_error; 6101 } 6102 { 6103 /* TODO: move to set_standard after hardware reset value problem is solved */ 6104 /* Configure initial MPEG output */ 6105 struct drx_cfg_mpeg_output cfg_mpeg_output; 6106 6107 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 6108 cfg_mpeg_output.enable_mpeg_output = true; 6109 6110 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 6111 if (rc != 0) { 6112 pr_err("error %d\n", rc); 6113 goto rw_error; 6114 } 6115 } 6116 6117 /* TBD: what parameters should be set */ 6118 cmd_param = 0x00; /* Default mode AGC on, etc */ 6119 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB 6120 | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM; 6121 cmd_scu.parameter_len = 1; 6122 cmd_scu.result_len = 1; 6123 cmd_scu.parameter = &cmd_param; 6124 cmd_scu.result = &cmd_result; 6125 rc = scu_command(dev_addr, &cmd_scu); 6126 if (rc != 0) { 6127 pr_err("error %d\n", rc); 6128 goto rw_error; 6129 } 6130 6131 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_BEAGC_GAINSHIFT__A, 0x0004, 0); 6132 if (rc != 0) { 6133 pr_err("error %d\n", rc); 6134 goto rw_error; 6135 } 6136 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_PT__A, 0x00D2, 0); 6137 if (rc != 0) { 6138 pr_err("error %d\n", rc); 6139 goto rw_error; 6140 } 6141 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SYSSMTRNCTRL__A, VSB_TOP_SYSSMTRNCTRL__PRE | VSB_TOP_SYSSMTRNCTRL_NCOTIMEOUTCNTEN__M, 0); 6142 if (rc != 0) { 6143 pr_err("error %d\n", rc); 6144 goto rw_error; 6145 } 6146 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_BEDETCTRL__A, 0x142, 0); 6147 if (rc != 0) { 6148 pr_err("error %d\n", rc); 6149 goto rw_error; 6150 } 6151 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_LBAGCREFLVL__A, 640, 0); 6152 if (rc != 0) { 6153 pr_err("error %d\n", rc); 6154 goto rw_error; 6155 } 6156 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN1ACQ__A, 4, 0); 6157 if (rc != 0) { 6158 pr_err("error %d\n", rc); 6159 goto rw_error; 6160 } 6161 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN1TRK__A, 2, 0); 6162 if (rc != 0) { 6163 pr_err("error %d\n", rc); 6164 goto rw_error; 6165 } 6166 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN2TRK__A, 3, 0); 6167 if (rc != 0) { 6168 pr_err("error %d\n", rc); 6169 goto rw_error; 6170 } 6171 6172 /* start demodulator */ 6173 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB 6174 | SCU_RAM_COMMAND_CMD_DEMOD_START; 6175 cmd_scu.parameter_len = 0; 6176 cmd_scu.result_len = 1; 6177 cmd_scu.parameter = NULL; 6178 cmd_scu.result = &cmd_result; 6179 rc = scu_command(dev_addr, &cmd_scu); 6180 if (rc != 0) { 6181 pr_err("error %d\n", rc); 6182 goto rw_error; 6183 } 6184 6185 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_ACTIVE, 0); 6186 if (rc != 0) { 6187 pr_err("error %d\n", rc); 6188 goto rw_error; 6189 } 6190 rc = drxj_dap_write_reg16(dev_addr, VSB_COMM_EXEC__A, VSB_COMM_EXEC_ACTIVE, 0); 6191 if (rc != 0) { 6192 pr_err("error %d\n", rc); 6193 goto rw_error; 6194 } 6195 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE, 0); 6196 if (rc != 0) { 6197 pr_err("error %d\n", rc); 6198 goto rw_error; 6199 } 6200 6201 return 0; 6202 rw_error: 6203 return rc; 6204 } 6205 6206 /* 6207 * \fn static short get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, u16 *PckErrs) 6208 * \brief Get the values of packet error in 8VSB mode 6209 * \return Error code 6210 */ 6211 static int get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, 6212 u32 *pck_errs, u32 *pck_count) 6213 { 6214 int rc; 6215 u16 data = 0; 6216 u16 period = 0; 6217 u16 prescale = 0; 6218 u16 packet_errors_mant = 0; 6219 u16 packet_errors_exp = 0; 6220 6221 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_FAILURES__A, &data, 0); 6222 if (rc != 0) { 6223 pr_err("error %d\n", rc); 6224 goto rw_error; 6225 } 6226 packet_errors_mant = data & FEC_RS_NR_FAILURES_FIXED_MANT__M; 6227 packet_errors_exp = (data & FEC_RS_NR_FAILURES_EXP__M) 6228 >> FEC_RS_NR_FAILURES_EXP__B; 6229 period = FEC_RS_MEASUREMENT_PERIOD; 6230 prescale = FEC_RS_MEASUREMENT_PRESCALE; 6231 /* packet error rate = (error packet number) per second */ 6232 /* 77.3 us is time for per packet */ 6233 if (period * prescale == 0) { 6234 pr_err("error: period and/or prescale is zero!\n"); 6235 return -EIO; 6236 } 6237 *pck_errs = packet_errors_mant * (1 << packet_errors_exp); 6238 *pck_count = period * prescale * 77; 6239 6240 return 0; 6241 rw_error: 6242 return rc; 6243 } 6244 6245 /* 6246 * \fn static short GetVSBBer(struct i2c_device_addr *dev_addr, u32 *ber) 6247 * \brief Get the values of ber in VSB mode 6248 * \return Error code 6249 */ 6250 static int get_vs_bpost_viterbi_ber(struct i2c_device_addr *dev_addr, 6251 u32 *ber, u32 *cnt) 6252 { 6253 int rc; 6254 u16 data = 0; 6255 u16 period = 0; 6256 u16 prescale = 0; 6257 u16 bit_errors_mant = 0; 6258 u16 bit_errors_exp = 0; 6259 6260 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_BIT_ERRORS__A, &data, 0); 6261 if (rc != 0) { 6262 pr_err("error %d\n", rc); 6263 goto rw_error; 6264 } 6265 period = FEC_RS_MEASUREMENT_PERIOD; 6266 prescale = FEC_RS_MEASUREMENT_PRESCALE; 6267 6268 bit_errors_mant = data & FEC_RS_NR_BIT_ERRORS_FIXED_MANT__M; 6269 bit_errors_exp = (data & FEC_RS_NR_BIT_ERRORS_EXP__M) 6270 >> FEC_RS_NR_BIT_ERRORS_EXP__B; 6271 6272 *cnt = period * prescale * 207 * ((bit_errors_exp > 2) ? 1 : 8); 6273 6274 if (((bit_errors_mant << bit_errors_exp) >> 3) > 68700) 6275 *ber = (*cnt) * 26570; 6276 else { 6277 if (period * prescale == 0) { 6278 pr_err("error: period and/or prescale is zero!\n"); 6279 return -EIO; 6280 } 6281 *ber = bit_errors_mant << ((bit_errors_exp > 2) ? 6282 (bit_errors_exp - 3) : bit_errors_exp); 6283 } 6284 6285 return 0; 6286 rw_error: 6287 return rc; 6288 } 6289 6290 /* 6291 * \fn static short get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber) 6292 * \brief Get the values of ber in VSB mode 6293 * \return Error code 6294 */ 6295 static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, 6296 u32 *ber, u32 *cnt) 6297 { 6298 u16 data = 0; 6299 int rc; 6300 6301 rc = drxj_dap_read_reg16(dev_addr, VSB_TOP_NR_SYM_ERRS__A, &data, 0); 6302 if (rc != 0) { 6303 pr_err("error %d\n", rc); 6304 return -EIO; 6305 } 6306 *ber = data; 6307 *cnt = VSB_TOP_MEASUREMENT_PERIOD * SYMBOLS_PER_SEGMENT; 6308 6309 return 0; 6310 } 6311 6312 /* 6313 * \fn static int get_vsbmer(struct i2c_device_addr *dev_addr, u16 *mer) 6314 * \brief Get the values of MER 6315 * \return Error code 6316 */ 6317 static int get_vsbmer(struct i2c_device_addr *dev_addr, u16 *mer) 6318 { 6319 int rc; 6320 u16 data_hi = 0; 6321 6322 rc = drxj_dap_read_reg16(dev_addr, VSB_TOP_ERR_ENERGY_H__A, &data_hi, 0); 6323 if (rc != 0) { 6324 pr_err("error %d\n", rc); 6325 goto rw_error; 6326 } 6327 *mer = 6328 (u16) (log1_times100(21504) - log1_times100((data_hi << 6) / 52)); 6329 6330 return 0; 6331 rw_error: 6332 return rc; 6333 } 6334 6335 6336 /*============================================================================*/ 6337 /*== END 8VSB DATAPATH FUNCTIONS ==*/ 6338 /*============================================================================*/ 6339 6340 /*============================================================================*/ 6341 /*============================================================================*/ 6342 /*== QAM DATAPATH FUNCTIONS ==*/ 6343 /*============================================================================*/ 6344 /*============================================================================*/ 6345 6346 /* 6347 * \fn int power_down_qam () 6348 * \brief Powr down QAM related blocks. 6349 * \param demod instance of demodulator. 6350 * \param channel pointer to channel data. 6351 * \return int. 6352 */ 6353 static int power_down_qam(struct drx_demod_instance *demod, bool primary) 6354 { 6355 struct drxjscu_cmd cmd_scu = { /* command */ 0, 6356 /* parameter_len */ 0, 6357 /* result_len */ 0, 6358 /* *parameter */ NULL, 6359 /* *result */ NULL 6360 }; 6361 int rc; 6362 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 6363 struct drx_cfg_mpeg_output cfg_mpeg_output; 6364 struct drx_common_attr *common_attr = demod->my_common_attr; 6365 u16 cmd_result = 0; 6366 6367 /* 6368 STOP demodulator 6369 resets IQM, QAM and FEC HW blocks 6370 */ 6371 /* stop all comm_exec */ 6372 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 6373 if (rc != 0) { 6374 pr_err("error %d\n", rc); 6375 goto rw_error; 6376 } 6377 rc = drxj_dap_write_reg16(dev_addr, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP, 0); 6378 if (rc != 0) { 6379 pr_err("error %d\n", rc); 6380 goto rw_error; 6381 } 6382 6383 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 6384 SCU_RAM_COMMAND_CMD_DEMOD_STOP; 6385 cmd_scu.parameter_len = 0; 6386 cmd_scu.result_len = 1; 6387 cmd_scu.parameter = NULL; 6388 cmd_scu.result = &cmd_result; 6389 rc = scu_command(dev_addr, &cmd_scu); 6390 if (rc != 0) { 6391 pr_err("error %d\n", rc); 6392 goto rw_error; 6393 } 6394 6395 if (primary) { 6396 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_STOP, 0); 6397 if (rc != 0) { 6398 pr_err("error %d\n", rc); 6399 goto rw_error; 6400 } 6401 rc = set_iqm_af(demod, false); 6402 if (rc != 0) { 6403 pr_err("error %d\n", rc); 6404 goto rw_error; 6405 } 6406 } else { 6407 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 6408 if (rc != 0) { 6409 pr_err("error %d\n", rc); 6410 goto rw_error; 6411 } 6412 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 6413 if (rc != 0) { 6414 pr_err("error %d\n", rc); 6415 goto rw_error; 6416 } 6417 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 6418 if (rc != 0) { 6419 pr_err("error %d\n", rc); 6420 goto rw_error; 6421 } 6422 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 6423 if (rc != 0) { 6424 pr_err("error %d\n", rc); 6425 goto rw_error; 6426 } 6427 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 6428 if (rc != 0) { 6429 pr_err("error %d\n", rc); 6430 goto rw_error; 6431 } 6432 } 6433 6434 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 6435 cfg_mpeg_output.enable_mpeg_output = false; 6436 6437 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 6438 if (rc != 0) { 6439 pr_err("error %d\n", rc); 6440 goto rw_error; 6441 } 6442 6443 return 0; 6444 rw_error: 6445 return rc; 6446 } 6447 6448 /*============================================================================*/ 6449 6450 /* 6451 * \fn int set_qam_measurement () 6452 * \brief Setup of the QAM Measuremnt intervals for signal quality 6453 * \param demod instance of demod. 6454 * \param constellation current constellation. 6455 * \return int. 6456 * 6457 * NOTE: 6458 * Take into account that for certain settings the errorcounters can overflow. 6459 * The implementation does not check this. 6460 * 6461 * TODO: overriding the ext_attr->fec_bits_desired by constellation dependent 6462 * constants to get a measurement period of approx. 1 sec. Remove fec_bits_desired 6463 * field ? 6464 * 6465 */ 6466 #ifndef DRXJ_VSB_ONLY 6467 static int 6468 set_qam_measurement(struct drx_demod_instance *demod, 6469 enum drx_modulation constellation, u32 symbol_rate) 6470 { 6471 struct i2c_device_addr *dev_addr = NULL; /* device address for I2C writes */ 6472 struct drxj_data *ext_attr = NULL; /* Global data container for DRXJ specific data */ 6473 int rc; 6474 u32 fec_bits_desired = 0; /* BER accounting period */ 6475 u16 fec_rs_plen = 0; /* defines RS BER measurement period */ 6476 u16 fec_rs_prescale = 0; /* ReedSolomon Measurement Prescale */ 6477 u32 fec_rs_period = 0; /* Value for corresponding I2C register */ 6478 u32 fec_rs_bit_cnt = 0; /* Actual precise amount of bits */ 6479 u32 fec_oc_snc_fail_period = 0; /* Value for corresponding I2C register */ 6480 u32 qam_vd_period = 0; /* Value for corresponding I2C register */ 6481 u32 qam_vd_bit_cnt = 0; /* Actual precise amount of bits */ 6482 u16 fec_vd_plen = 0; /* no of trellis symbols: VD SER measur period */ 6483 u16 qam_vd_prescale = 0; /* Viterbi Measurement Prescale */ 6484 6485 dev_addr = demod->my_i2c_dev_addr; 6486 ext_attr = (struct drxj_data *) demod->my_ext_attr; 6487 6488 fec_bits_desired = ext_attr->fec_bits_desired; 6489 fec_rs_prescale = ext_attr->fec_rs_prescale; 6490 6491 switch (constellation) { 6492 case DRX_CONSTELLATION_QAM16: 6493 fec_bits_desired = 4 * symbol_rate; 6494 break; 6495 case DRX_CONSTELLATION_QAM32: 6496 fec_bits_desired = 5 * symbol_rate; 6497 break; 6498 case DRX_CONSTELLATION_QAM64: 6499 fec_bits_desired = 6 * symbol_rate; 6500 break; 6501 case DRX_CONSTELLATION_QAM128: 6502 fec_bits_desired = 7 * symbol_rate; 6503 break; 6504 case DRX_CONSTELLATION_QAM256: 6505 fec_bits_desired = 8 * symbol_rate; 6506 break; 6507 default: 6508 return -EINVAL; 6509 } 6510 6511 /* Parameters for Reed-Solomon Decoder */ 6512 /* fecrs_period = (int)ceil(FEC_BITS_DESIRED/(fecrs_prescale*plen)) */ 6513 /* rs_bit_cnt = fecrs_period*fecrs_prescale*plen */ 6514 /* result is within 32 bit arithmetic -> */ 6515 /* no need for mult or frac functions */ 6516 6517 /* TODO: use constant instead of calculation and remove the fec_rs_plen in ext_attr */ 6518 switch (ext_attr->standard) { 6519 case DRX_STANDARD_ITU_A: 6520 case DRX_STANDARD_ITU_C: 6521 fec_rs_plen = 204 * 8; 6522 break; 6523 case DRX_STANDARD_ITU_B: 6524 fec_rs_plen = 128 * 7; 6525 break; 6526 default: 6527 return -EINVAL; 6528 } 6529 6530 ext_attr->fec_rs_plen = fec_rs_plen; /* for getSigQual */ 6531 fec_rs_bit_cnt = fec_rs_prescale * fec_rs_plen; /* temp storage */ 6532 if (fec_rs_bit_cnt == 0) { 6533 pr_err("error: fec_rs_bit_cnt is zero!\n"); 6534 return -EIO; 6535 } 6536 fec_rs_period = fec_bits_desired / fec_rs_bit_cnt + 1; /* ceil */ 6537 if (ext_attr->standard != DRX_STANDARD_ITU_B) 6538 fec_oc_snc_fail_period = fec_rs_period; 6539 6540 /* limit to max 16 bit value (I2C register width) if needed */ 6541 if (fec_rs_period > 0xFFFF) 6542 fec_rs_period = 0xFFFF; 6543 6544 /* write corresponding registers */ 6545 switch (ext_attr->standard) { 6546 case DRX_STANDARD_ITU_A: 6547 case DRX_STANDARD_ITU_C: 6548 break; 6549 case DRX_STANDARD_ITU_B: 6550 switch (constellation) { 6551 case DRX_CONSTELLATION_QAM64: 6552 fec_rs_period = 31581; 6553 fec_oc_snc_fail_period = 17932; 6554 break; 6555 case DRX_CONSTELLATION_QAM256: 6556 fec_rs_period = 45446; 6557 fec_oc_snc_fail_period = 25805; 6558 break; 6559 default: 6560 return -EINVAL; 6561 } 6562 break; 6563 default: 6564 return -EINVAL; 6565 } 6566 6567 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_FAIL_PERIOD__A, (u16)fec_oc_snc_fail_period, 0); 6568 if (rc != 0) { 6569 pr_err("error %d\n", rc); 6570 goto rw_error; 6571 } 6572 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PERIOD__A, (u16)fec_rs_period, 0); 6573 if (rc != 0) { 6574 pr_err("error %d\n", rc); 6575 goto rw_error; 6576 } 6577 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PRESCALE__A, fec_rs_prescale, 0); 6578 if (rc != 0) { 6579 pr_err("error %d\n", rc); 6580 goto rw_error; 6581 } 6582 ext_attr->fec_rs_period = (u16) fec_rs_period; 6583 ext_attr->fec_rs_prescale = fec_rs_prescale; 6584 rc = drxdap_fasi_write_reg32(dev_addr, SCU_RAM_FEC_ACCUM_CW_CORRECTED_LO__A, 0, 0); 6585 if (rc != 0) { 6586 pr_err("error %d\n", rc); 6587 goto rw_error; 6588 } 6589 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_MEAS_COUNT__A, 0, 0); 6590 if (rc != 0) { 6591 pr_err("error %d\n", rc); 6592 goto rw_error; 6593 } 6594 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0, 0); 6595 if (rc != 0) { 6596 pr_err("error %d\n", rc); 6597 goto rw_error; 6598 } 6599 6600 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 6601 /* Parameters for Viterbi Decoder */ 6602 /* qamvd_period = (int)ceil(FEC_BITS_DESIRED/ */ 6603 /* (qamvd_prescale*plen*(qam_constellation+1))) */ 6604 /* vd_bit_cnt = qamvd_period*qamvd_prescale*plen */ 6605 /* result is within 32 bit arithmetic -> */ 6606 /* no need for mult or frac functions */ 6607 6608 /* a(8 bit) * b(8 bit) = 16 bit result => mult32 not needed */ 6609 fec_vd_plen = ext_attr->fec_vd_plen; 6610 qam_vd_prescale = ext_attr->qam_vd_prescale; 6611 qam_vd_bit_cnt = qam_vd_prescale * fec_vd_plen; /* temp storage */ 6612 6613 switch (constellation) { 6614 case DRX_CONSTELLATION_QAM64: 6615 /* a(16 bit) * b(4 bit) = 20 bit result => mult32 not needed */ 6616 qam_vd_period = 6617 qam_vd_bit_cnt * (QAM_TOP_CONSTELLATION_QAM64 + 1) 6618 * (QAM_TOP_CONSTELLATION_QAM64 + 1); 6619 break; 6620 case DRX_CONSTELLATION_QAM256: 6621 /* a(16 bit) * b(5 bit) = 21 bit result => mult32 not needed */ 6622 qam_vd_period = 6623 qam_vd_bit_cnt * (QAM_TOP_CONSTELLATION_QAM256 + 1) 6624 * (QAM_TOP_CONSTELLATION_QAM256 + 1); 6625 break; 6626 default: 6627 return -EINVAL; 6628 } 6629 if (qam_vd_period == 0) { 6630 pr_err("error: qam_vd_period is zero!\n"); 6631 return -EIO; 6632 } 6633 qam_vd_period = fec_bits_desired / qam_vd_period; 6634 /* limit to max 16 bit value (I2C register width) if needed */ 6635 if (qam_vd_period > 0xFFFF) 6636 qam_vd_period = 0xFFFF; 6637 6638 /* a(16 bit) * b(16 bit) = 32 bit result => mult32 not needed */ 6639 qam_vd_bit_cnt *= qam_vd_period; 6640 6641 rc = drxj_dap_write_reg16(dev_addr, QAM_VD_MEASUREMENT_PERIOD__A, (u16)qam_vd_period, 0); 6642 if (rc != 0) { 6643 pr_err("error %d\n", rc); 6644 goto rw_error; 6645 } 6646 rc = drxj_dap_write_reg16(dev_addr, QAM_VD_MEASUREMENT_PRESCALE__A, qam_vd_prescale, 0); 6647 if (rc != 0) { 6648 pr_err("error %d\n", rc); 6649 goto rw_error; 6650 } 6651 ext_attr->qam_vd_period = (u16) qam_vd_period; 6652 ext_attr->qam_vd_prescale = qam_vd_prescale; 6653 } 6654 6655 return 0; 6656 rw_error: 6657 return rc; 6658 } 6659 6660 /*============================================================================*/ 6661 6662 /* 6663 * \fn int set_qam16 () 6664 * \brief QAM16 specific setup 6665 * \param demod instance of demod. 6666 * \return int. 6667 */ 6668 static int set_qam16(struct drx_demod_instance *demod) 6669 { 6670 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 6671 int rc; 6672 static const u8 qam_dq_qual_fun[] = { 6673 DRXJ_16TO8(2), /* fun0 */ 6674 DRXJ_16TO8(2), /* fun1 */ 6675 DRXJ_16TO8(2), /* fun2 */ 6676 DRXJ_16TO8(2), /* fun3 */ 6677 DRXJ_16TO8(3), /* fun4 */ 6678 DRXJ_16TO8(3), /* fun5 */ 6679 }; 6680 static const u8 qam_eq_cma_rad[] = { 6681 DRXJ_16TO8(13517), /* RAD0 */ 6682 DRXJ_16TO8(13517), /* RAD1 */ 6683 DRXJ_16TO8(13517), /* RAD2 */ 6684 DRXJ_16TO8(13517), /* RAD3 */ 6685 DRXJ_16TO8(13517), /* RAD4 */ 6686 DRXJ_16TO8(13517), /* RAD5 */ 6687 }; 6688 6689 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 6690 if (rc != 0) { 6691 pr_err("error %d\n", rc); 6692 goto rw_error; 6693 } 6694 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 6695 if (rc != 0) { 6696 pr_err("error %d\n", rc); 6697 goto rw_error; 6698 } 6699 6700 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 140, 0); 6701 if (rc != 0) { 6702 pr_err("error %d\n", rc); 6703 goto rw_error; 6704 } 6705 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 50, 0); 6706 if (rc != 0) { 6707 pr_err("error %d\n", rc); 6708 goto rw_error; 6709 } 6710 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 120, 0); 6711 if (rc != 0) { 6712 pr_err("error %d\n", rc); 6713 goto rw_error; 6714 } 6715 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 230, 0); 6716 if (rc != 0) { 6717 pr_err("error %d\n", rc); 6718 goto rw_error; 6719 } 6720 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 95, 0); 6721 if (rc != 0) { 6722 pr_err("error %d\n", rc); 6723 goto rw_error; 6724 } 6725 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 105, 0); 6726 if (rc != 0) { 6727 pr_err("error %d\n", rc); 6728 goto rw_error; 6729 } 6730 6731 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 6732 if (rc != 0) { 6733 pr_err("error %d\n", rc); 6734 goto rw_error; 6735 } 6736 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 56, 0); 6737 if (rc != 0) { 6738 pr_err("error %d\n", rc); 6739 goto rw_error; 6740 } 6741 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 6742 if (rc != 0) { 6743 pr_err("error %d\n", rc); 6744 goto rw_error; 6745 } 6746 6747 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 16, 0); 6748 if (rc != 0) { 6749 pr_err("error %d\n", rc); 6750 goto rw_error; 6751 } 6752 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 220, 0); 6753 if (rc != 0) { 6754 pr_err("error %d\n", rc); 6755 goto rw_error; 6756 } 6757 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 25, 0); 6758 if (rc != 0) { 6759 pr_err("error %d\n", rc); 6760 goto rw_error; 6761 } 6762 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 6, 0); 6763 if (rc != 0) { 6764 pr_err("error %d\n", rc); 6765 goto rw_error; 6766 } 6767 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-24), 0); 6768 if (rc != 0) { 6769 pr_err("error %d\n", rc); 6770 goto rw_error; 6771 } 6772 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16)(-65), 0); 6773 if (rc != 0) { 6774 pr_err("error %d\n", rc); 6775 goto rw_error; 6776 } 6777 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-127), 0); 6778 if (rc != 0) { 6779 pr_err("error %d\n", rc); 6780 goto rw_error; 6781 } 6782 6783 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 6784 if (rc != 0) { 6785 pr_err("error %d\n", rc); 6786 goto rw_error; 6787 } 6788 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 6789 if (rc != 0) { 6790 pr_err("error %d\n", rc); 6791 goto rw_error; 6792 } 6793 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 6794 if (rc != 0) { 6795 pr_err("error %d\n", rc); 6796 goto rw_error; 6797 } 6798 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20, 0); 6799 if (rc != 0) { 6800 pr_err("error %d\n", rc); 6801 goto rw_error; 6802 } 6803 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 6804 if (rc != 0) { 6805 pr_err("error %d\n", rc); 6806 goto rw_error; 6807 } 6808 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 6809 if (rc != 0) { 6810 pr_err("error %d\n", rc); 6811 goto rw_error; 6812 } 6813 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 10, 0); 6814 if (rc != 0) { 6815 pr_err("error %d\n", rc); 6816 goto rw_error; 6817 } 6818 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 50, 0); 6819 if (rc != 0) { 6820 pr_err("error %d\n", rc); 6821 goto rw_error; 6822 } 6823 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 6824 if (rc != 0) { 6825 pr_err("error %d\n", rc); 6826 goto rw_error; 6827 } 6828 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 6829 if (rc != 0) { 6830 pr_err("error %d\n", rc); 6831 goto rw_error; 6832 } 6833 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 6834 if (rc != 0) { 6835 pr_err("error %d\n", rc); 6836 goto rw_error; 6837 } 6838 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 6839 if (rc != 0) { 6840 pr_err("error %d\n", rc); 6841 goto rw_error; 6842 } 6843 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 6844 if (rc != 0) { 6845 pr_err("error %d\n", rc); 6846 goto rw_error; 6847 } 6848 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 6849 if (rc != 0) { 6850 pr_err("error %d\n", rc); 6851 goto rw_error; 6852 } 6853 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 6854 if (rc != 0) { 6855 pr_err("error %d\n", rc); 6856 goto rw_error; 6857 } 6858 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 32, 0); 6859 if (rc != 0) { 6860 pr_err("error %d\n", rc); 6861 goto rw_error; 6862 } 6863 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 240, 0); 6864 if (rc != 0) { 6865 pr_err("error %d\n", rc); 6866 goto rw_error; 6867 } 6868 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 6869 if (rc != 0) { 6870 pr_err("error %d\n", rc); 6871 goto rw_error; 6872 } 6873 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 6874 if (rc != 0) { 6875 pr_err("error %d\n", rc); 6876 goto rw_error; 6877 } 6878 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 32, 0); 6879 if (rc != 0) { 6880 pr_err("error %d\n", rc); 6881 goto rw_error; 6882 } 6883 6884 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 40960, 0); 6885 if (rc != 0) { 6886 pr_err("error %d\n", rc); 6887 goto rw_error; 6888 } 6889 6890 return 0; 6891 rw_error: 6892 return rc; 6893 } 6894 6895 /*============================================================================*/ 6896 6897 /* 6898 * \fn int set_qam32 () 6899 * \brief QAM32 specific setup 6900 * \param demod instance of demod. 6901 * \return int. 6902 */ 6903 static int set_qam32(struct drx_demod_instance *demod) 6904 { 6905 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 6906 int rc; 6907 static const u8 qam_dq_qual_fun[] = { 6908 DRXJ_16TO8(3), /* fun0 */ 6909 DRXJ_16TO8(3), /* fun1 */ 6910 DRXJ_16TO8(3), /* fun2 */ 6911 DRXJ_16TO8(3), /* fun3 */ 6912 DRXJ_16TO8(4), /* fun4 */ 6913 DRXJ_16TO8(4), /* fun5 */ 6914 }; 6915 static const u8 qam_eq_cma_rad[] = { 6916 DRXJ_16TO8(6707), /* RAD0 */ 6917 DRXJ_16TO8(6707), /* RAD1 */ 6918 DRXJ_16TO8(6707), /* RAD2 */ 6919 DRXJ_16TO8(6707), /* RAD3 */ 6920 DRXJ_16TO8(6707), /* RAD4 */ 6921 DRXJ_16TO8(6707), /* RAD5 */ 6922 }; 6923 6924 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 6925 if (rc != 0) { 6926 pr_err("error %d\n", rc); 6927 goto rw_error; 6928 } 6929 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 6930 if (rc != 0) { 6931 pr_err("error %d\n", rc); 6932 goto rw_error; 6933 } 6934 6935 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 90, 0); 6936 if (rc != 0) { 6937 pr_err("error %d\n", rc); 6938 goto rw_error; 6939 } 6940 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 50, 0); 6941 if (rc != 0) { 6942 pr_err("error %d\n", rc); 6943 goto rw_error; 6944 } 6945 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 6946 if (rc != 0) { 6947 pr_err("error %d\n", rc); 6948 goto rw_error; 6949 } 6950 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 170, 0); 6951 if (rc != 0) { 6952 pr_err("error %d\n", rc); 6953 goto rw_error; 6954 } 6955 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 6956 if (rc != 0) { 6957 pr_err("error %d\n", rc); 6958 goto rw_error; 6959 } 6960 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 100, 0); 6961 if (rc != 0) { 6962 pr_err("error %d\n", rc); 6963 goto rw_error; 6964 } 6965 6966 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 6967 if (rc != 0) { 6968 pr_err("error %d\n", rc); 6969 goto rw_error; 6970 } 6971 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 56, 0); 6972 if (rc != 0) { 6973 pr_err("error %d\n", rc); 6974 goto rw_error; 6975 } 6976 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 6977 if (rc != 0) { 6978 pr_err("error %d\n", rc); 6979 goto rw_error; 6980 } 6981 6982 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 12, 0); 6983 if (rc != 0) { 6984 pr_err("error %d\n", rc); 6985 goto rw_error; 6986 } 6987 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 140, 0); 6988 if (rc != 0) { 6989 pr_err("error %d\n", rc); 6990 goto rw_error; 6991 } 6992 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16)(-8), 0); 6993 if (rc != 0) { 6994 pr_err("error %d\n", rc); 6995 goto rw_error; 6996 } 6997 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16)(-16), 0); 6998 if (rc != 0) { 6999 pr_err("error %d\n", rc); 7000 goto rw_error; 7001 } 7002 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-26), 0); 7003 if (rc != 0) { 7004 pr_err("error %d\n", rc); 7005 goto rw_error; 7006 } 7007 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16)(-56), 0); 7008 if (rc != 0) { 7009 pr_err("error %d\n", rc); 7010 goto rw_error; 7011 } 7012 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-86), 0); 7013 if (rc != 0) { 7014 pr_err("error %d\n", rc); 7015 goto rw_error; 7016 } 7017 7018 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7019 if (rc != 0) { 7020 pr_err("error %d\n", rc); 7021 goto rw_error; 7022 } 7023 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7024 if (rc != 0) { 7025 pr_err("error %d\n", rc); 7026 goto rw_error; 7027 } 7028 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7029 if (rc != 0) { 7030 pr_err("error %d\n", rc); 7031 goto rw_error; 7032 } 7033 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20, 0); 7034 if (rc != 0) { 7035 pr_err("error %d\n", rc); 7036 goto rw_error; 7037 } 7038 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7039 if (rc != 0) { 7040 pr_err("error %d\n", rc); 7041 goto rw_error; 7042 } 7043 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7044 if (rc != 0) { 7045 pr_err("error %d\n", rc); 7046 goto rw_error; 7047 } 7048 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 10, 0); 7049 if (rc != 0) { 7050 pr_err("error %d\n", rc); 7051 goto rw_error; 7052 } 7053 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 50, 0); 7054 if (rc != 0) { 7055 pr_err("error %d\n", rc); 7056 goto rw_error; 7057 } 7058 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7059 if (rc != 0) { 7060 pr_err("error %d\n", rc); 7061 goto rw_error; 7062 } 7063 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7064 if (rc != 0) { 7065 pr_err("error %d\n", rc); 7066 goto rw_error; 7067 } 7068 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7069 if (rc != 0) { 7070 pr_err("error %d\n", rc); 7071 goto rw_error; 7072 } 7073 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7074 if (rc != 0) { 7075 pr_err("error %d\n", rc); 7076 goto rw_error; 7077 } 7078 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7079 if (rc != 0) { 7080 pr_err("error %d\n", rc); 7081 goto rw_error; 7082 } 7083 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7084 if (rc != 0) { 7085 pr_err("error %d\n", rc); 7086 goto rw_error; 7087 } 7088 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7089 if (rc != 0) { 7090 pr_err("error %d\n", rc); 7091 goto rw_error; 7092 } 7093 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 32, 0); 7094 if (rc != 0) { 7095 pr_err("error %d\n", rc); 7096 goto rw_error; 7097 } 7098 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 176, 0); 7099 if (rc != 0) { 7100 pr_err("error %d\n", rc); 7101 goto rw_error; 7102 } 7103 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7104 if (rc != 0) { 7105 pr_err("error %d\n", rc); 7106 goto rw_error; 7107 } 7108 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7109 if (rc != 0) { 7110 pr_err("error %d\n", rc); 7111 goto rw_error; 7112 } 7113 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 8, 0); 7114 if (rc != 0) { 7115 pr_err("error %d\n", rc); 7116 goto rw_error; 7117 } 7118 7119 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 20480, 0); 7120 if (rc != 0) { 7121 pr_err("error %d\n", rc); 7122 goto rw_error; 7123 } 7124 7125 return 0; 7126 rw_error: 7127 return rc; 7128 } 7129 7130 /*============================================================================*/ 7131 7132 /* 7133 * \fn int set_qam64 () 7134 * \brief QAM64 specific setup 7135 * \param demod instance of demod. 7136 * \return int. 7137 */ 7138 static int set_qam64(struct drx_demod_instance *demod) 7139 { 7140 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 7141 int rc; 7142 static const u8 qam_dq_qual_fun[] = { 7143 /* this is hw reset value. no necessary to re-write */ 7144 DRXJ_16TO8(4), /* fun0 */ 7145 DRXJ_16TO8(4), /* fun1 */ 7146 DRXJ_16TO8(4), /* fun2 */ 7147 DRXJ_16TO8(4), /* fun3 */ 7148 DRXJ_16TO8(6), /* fun4 */ 7149 DRXJ_16TO8(6), /* fun5 */ 7150 }; 7151 static const u8 qam_eq_cma_rad[] = { 7152 DRXJ_16TO8(13336), /* RAD0 */ 7153 DRXJ_16TO8(12618), /* RAD1 */ 7154 DRXJ_16TO8(11988), /* RAD2 */ 7155 DRXJ_16TO8(13809), /* RAD3 */ 7156 DRXJ_16TO8(13809), /* RAD4 */ 7157 DRXJ_16TO8(15609), /* RAD5 */ 7158 }; 7159 7160 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 7161 if (rc != 0) { 7162 pr_err("error %d\n", rc); 7163 goto rw_error; 7164 } 7165 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 7166 if (rc != 0) { 7167 pr_err("error %d\n", rc); 7168 goto rw_error; 7169 } 7170 7171 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 105, 0); 7172 if (rc != 0) { 7173 pr_err("error %d\n", rc); 7174 goto rw_error; 7175 } 7176 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 60, 0); 7177 if (rc != 0) { 7178 pr_err("error %d\n", rc); 7179 goto rw_error; 7180 } 7181 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 7182 if (rc != 0) { 7183 pr_err("error %d\n", rc); 7184 goto rw_error; 7185 } 7186 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 195, 0); 7187 if (rc != 0) { 7188 pr_err("error %d\n", rc); 7189 goto rw_error; 7190 } 7191 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 7192 if (rc != 0) { 7193 pr_err("error %d\n", rc); 7194 goto rw_error; 7195 } 7196 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 84, 0); 7197 if (rc != 0) { 7198 pr_err("error %d\n", rc); 7199 goto rw_error; 7200 } 7201 7202 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 7203 if (rc != 0) { 7204 pr_err("error %d\n", rc); 7205 goto rw_error; 7206 } 7207 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 32, 0); 7208 if (rc != 0) { 7209 pr_err("error %d\n", rc); 7210 goto rw_error; 7211 } 7212 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 7213 if (rc != 0) { 7214 pr_err("error %d\n", rc); 7215 goto rw_error; 7216 } 7217 7218 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 12, 0); 7219 if (rc != 0) { 7220 pr_err("error %d\n", rc); 7221 goto rw_error; 7222 } 7223 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 141, 0); 7224 if (rc != 0) { 7225 pr_err("error %d\n", rc); 7226 goto rw_error; 7227 } 7228 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 7, 0); 7229 if (rc != 0) { 7230 pr_err("error %d\n", rc); 7231 goto rw_error; 7232 } 7233 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 0, 0); 7234 if (rc != 0) { 7235 pr_err("error %d\n", rc); 7236 goto rw_error; 7237 } 7238 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-15), 0); 7239 if (rc != 0) { 7240 pr_err("error %d\n", rc); 7241 goto rw_error; 7242 } 7243 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16)(-45), 0); 7244 if (rc != 0) { 7245 pr_err("error %d\n", rc); 7246 goto rw_error; 7247 } 7248 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-80), 0); 7249 if (rc != 0) { 7250 pr_err("error %d\n", rc); 7251 goto rw_error; 7252 } 7253 7254 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7255 if (rc != 0) { 7256 pr_err("error %d\n", rc); 7257 goto rw_error; 7258 } 7259 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7260 if (rc != 0) { 7261 pr_err("error %d\n", rc); 7262 goto rw_error; 7263 } 7264 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7265 if (rc != 0) { 7266 pr_err("error %d\n", rc); 7267 goto rw_error; 7268 } 7269 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30, 0); 7270 if (rc != 0) { 7271 pr_err("error %d\n", rc); 7272 goto rw_error; 7273 } 7274 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7275 if (rc != 0) { 7276 pr_err("error %d\n", rc); 7277 goto rw_error; 7278 } 7279 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7280 if (rc != 0) { 7281 pr_err("error %d\n", rc); 7282 goto rw_error; 7283 } 7284 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 15, 0); 7285 if (rc != 0) { 7286 pr_err("error %d\n", rc); 7287 goto rw_error; 7288 } 7289 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 80, 0); 7290 if (rc != 0) { 7291 pr_err("error %d\n", rc); 7292 goto rw_error; 7293 } 7294 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7295 if (rc != 0) { 7296 pr_err("error %d\n", rc); 7297 goto rw_error; 7298 } 7299 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7300 if (rc != 0) { 7301 pr_err("error %d\n", rc); 7302 goto rw_error; 7303 } 7304 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7305 if (rc != 0) { 7306 pr_err("error %d\n", rc); 7307 goto rw_error; 7308 } 7309 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7310 if (rc != 0) { 7311 pr_err("error %d\n", rc); 7312 goto rw_error; 7313 } 7314 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7315 if (rc != 0) { 7316 pr_err("error %d\n", rc); 7317 goto rw_error; 7318 } 7319 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7320 if (rc != 0) { 7321 pr_err("error %d\n", rc); 7322 goto rw_error; 7323 } 7324 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7325 if (rc != 0) { 7326 pr_err("error %d\n", rc); 7327 goto rw_error; 7328 } 7329 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 48, 0); 7330 if (rc != 0) { 7331 pr_err("error %d\n", rc); 7332 goto rw_error; 7333 } 7334 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 160, 0); 7335 if (rc != 0) { 7336 pr_err("error %d\n", rc); 7337 goto rw_error; 7338 } 7339 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7340 if (rc != 0) { 7341 pr_err("error %d\n", rc); 7342 goto rw_error; 7343 } 7344 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7345 if (rc != 0) { 7346 pr_err("error %d\n", rc); 7347 goto rw_error; 7348 } 7349 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 32, 0); 7350 if (rc != 0) { 7351 pr_err("error %d\n", rc); 7352 goto rw_error; 7353 } 7354 7355 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 43008, 0); 7356 if (rc != 0) { 7357 pr_err("error %d\n", rc); 7358 goto rw_error; 7359 } 7360 7361 return 0; 7362 rw_error: 7363 return rc; 7364 } 7365 7366 /*============================================================================*/ 7367 7368 /* 7369 * \fn int set_qam128 () 7370 * \brief QAM128 specific setup 7371 * \param demod: instance of demod. 7372 * \return int. 7373 */ 7374 static int set_qam128(struct drx_demod_instance *demod) 7375 { 7376 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 7377 int rc; 7378 static const u8 qam_dq_qual_fun[] = { 7379 DRXJ_16TO8(6), /* fun0 */ 7380 DRXJ_16TO8(6), /* fun1 */ 7381 DRXJ_16TO8(6), /* fun2 */ 7382 DRXJ_16TO8(6), /* fun3 */ 7383 DRXJ_16TO8(9), /* fun4 */ 7384 DRXJ_16TO8(9), /* fun5 */ 7385 }; 7386 static const u8 qam_eq_cma_rad[] = { 7387 DRXJ_16TO8(6164), /* RAD0 */ 7388 DRXJ_16TO8(6598), /* RAD1 */ 7389 DRXJ_16TO8(6394), /* RAD2 */ 7390 DRXJ_16TO8(6409), /* RAD3 */ 7391 DRXJ_16TO8(6656), /* RAD4 */ 7392 DRXJ_16TO8(7238), /* RAD5 */ 7393 }; 7394 7395 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 7396 if (rc != 0) { 7397 pr_err("error %d\n", rc); 7398 goto rw_error; 7399 } 7400 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 7401 if (rc != 0) { 7402 pr_err("error %d\n", rc); 7403 goto rw_error; 7404 } 7405 7406 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 50, 0); 7407 if (rc != 0) { 7408 pr_err("error %d\n", rc); 7409 goto rw_error; 7410 } 7411 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 60, 0); 7412 if (rc != 0) { 7413 pr_err("error %d\n", rc); 7414 goto rw_error; 7415 } 7416 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 7417 if (rc != 0) { 7418 pr_err("error %d\n", rc); 7419 goto rw_error; 7420 } 7421 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 140, 0); 7422 if (rc != 0) { 7423 pr_err("error %d\n", rc); 7424 goto rw_error; 7425 } 7426 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 7427 if (rc != 0) { 7428 pr_err("error %d\n", rc); 7429 goto rw_error; 7430 } 7431 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 100, 0); 7432 if (rc != 0) { 7433 pr_err("error %d\n", rc); 7434 goto rw_error; 7435 } 7436 7437 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 7438 if (rc != 0) { 7439 pr_err("error %d\n", rc); 7440 goto rw_error; 7441 } 7442 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 32, 0); 7443 if (rc != 0) { 7444 pr_err("error %d\n", rc); 7445 goto rw_error; 7446 } 7447 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 7448 if (rc != 0) { 7449 pr_err("error %d\n", rc); 7450 goto rw_error; 7451 } 7452 7453 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 8, 0); 7454 if (rc != 0) { 7455 pr_err("error %d\n", rc); 7456 goto rw_error; 7457 } 7458 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 65, 0); 7459 if (rc != 0) { 7460 pr_err("error %d\n", rc); 7461 goto rw_error; 7462 } 7463 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 5, 0); 7464 if (rc != 0) { 7465 pr_err("error %d\n", rc); 7466 goto rw_error; 7467 } 7468 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 3, 0); 7469 if (rc != 0) { 7470 pr_err("error %d\n", rc); 7471 goto rw_error; 7472 } 7473 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-1), 0); 7474 if (rc != 0) { 7475 pr_err("error %d\n", rc); 7476 goto rw_error; 7477 } 7478 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, 12, 0); 7479 if (rc != 0) { 7480 pr_err("error %d\n", rc); 7481 goto rw_error; 7482 } 7483 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-23), 0); 7484 if (rc != 0) { 7485 pr_err("error %d\n", rc); 7486 goto rw_error; 7487 } 7488 7489 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7490 if (rc != 0) { 7491 pr_err("error %d\n", rc); 7492 goto rw_error; 7493 } 7494 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7495 if (rc != 0) { 7496 pr_err("error %d\n", rc); 7497 goto rw_error; 7498 } 7499 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7500 if (rc != 0) { 7501 pr_err("error %d\n", rc); 7502 goto rw_error; 7503 } 7504 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40, 0); 7505 if (rc != 0) { 7506 pr_err("error %d\n", rc); 7507 goto rw_error; 7508 } 7509 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7510 if (rc != 0) { 7511 pr_err("error %d\n", rc); 7512 goto rw_error; 7513 } 7514 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7515 if (rc != 0) { 7516 pr_err("error %d\n", rc); 7517 goto rw_error; 7518 } 7519 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20, 0); 7520 if (rc != 0) { 7521 pr_err("error %d\n", rc); 7522 goto rw_error; 7523 } 7524 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 80, 0); 7525 if (rc != 0) { 7526 pr_err("error %d\n", rc); 7527 goto rw_error; 7528 } 7529 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7530 if (rc != 0) { 7531 pr_err("error %d\n", rc); 7532 goto rw_error; 7533 } 7534 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7535 if (rc != 0) { 7536 pr_err("error %d\n", rc); 7537 goto rw_error; 7538 } 7539 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7540 if (rc != 0) { 7541 pr_err("error %d\n", rc); 7542 goto rw_error; 7543 } 7544 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7545 if (rc != 0) { 7546 pr_err("error %d\n", rc); 7547 goto rw_error; 7548 } 7549 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7550 if (rc != 0) { 7551 pr_err("error %d\n", rc); 7552 goto rw_error; 7553 } 7554 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7555 if (rc != 0) { 7556 pr_err("error %d\n", rc); 7557 goto rw_error; 7558 } 7559 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7560 if (rc != 0) { 7561 pr_err("error %d\n", rc); 7562 goto rw_error; 7563 } 7564 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 32, 0); 7565 if (rc != 0) { 7566 pr_err("error %d\n", rc); 7567 goto rw_error; 7568 } 7569 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 144, 0); 7570 if (rc != 0) { 7571 pr_err("error %d\n", rc); 7572 goto rw_error; 7573 } 7574 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7575 if (rc != 0) { 7576 pr_err("error %d\n", rc); 7577 goto rw_error; 7578 } 7579 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7580 if (rc != 0) { 7581 pr_err("error %d\n", rc); 7582 goto rw_error; 7583 } 7584 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 16, 0); 7585 if (rc != 0) { 7586 pr_err("error %d\n", rc); 7587 goto rw_error; 7588 } 7589 7590 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 20992, 0); 7591 if (rc != 0) { 7592 pr_err("error %d\n", rc); 7593 goto rw_error; 7594 } 7595 7596 return 0; 7597 rw_error: 7598 return rc; 7599 } 7600 7601 /*============================================================================*/ 7602 7603 /* 7604 * \fn int set_qam256 () 7605 * \brief QAM256 specific setup 7606 * \param demod: instance of demod. 7607 * \return int. 7608 */ 7609 static int set_qam256(struct drx_demod_instance *demod) 7610 { 7611 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 7612 int rc; 7613 static const u8 qam_dq_qual_fun[] = { 7614 DRXJ_16TO8(8), /* fun0 */ 7615 DRXJ_16TO8(8), /* fun1 */ 7616 DRXJ_16TO8(8), /* fun2 */ 7617 DRXJ_16TO8(8), /* fun3 */ 7618 DRXJ_16TO8(12), /* fun4 */ 7619 DRXJ_16TO8(12), /* fun5 */ 7620 }; 7621 static const u8 qam_eq_cma_rad[] = { 7622 DRXJ_16TO8(12345), /* RAD0 */ 7623 DRXJ_16TO8(12345), /* RAD1 */ 7624 DRXJ_16TO8(13626), /* RAD2 */ 7625 DRXJ_16TO8(12931), /* RAD3 */ 7626 DRXJ_16TO8(14719), /* RAD4 */ 7627 DRXJ_16TO8(15356), /* RAD5 */ 7628 }; 7629 7630 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 7631 if (rc != 0) { 7632 pr_err("error %d\n", rc); 7633 goto rw_error; 7634 } 7635 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 7636 if (rc != 0) { 7637 pr_err("error %d\n", rc); 7638 goto rw_error; 7639 } 7640 7641 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 50, 0); 7642 if (rc != 0) { 7643 pr_err("error %d\n", rc); 7644 goto rw_error; 7645 } 7646 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 60, 0); 7647 if (rc != 0) { 7648 pr_err("error %d\n", rc); 7649 goto rw_error; 7650 } 7651 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 7652 if (rc != 0) { 7653 pr_err("error %d\n", rc); 7654 goto rw_error; 7655 } 7656 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 150, 0); 7657 if (rc != 0) { 7658 pr_err("error %d\n", rc); 7659 goto rw_error; 7660 } 7661 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 7662 if (rc != 0) { 7663 pr_err("error %d\n", rc); 7664 goto rw_error; 7665 } 7666 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 110, 0); 7667 if (rc != 0) { 7668 pr_err("error %d\n", rc); 7669 goto rw_error; 7670 } 7671 7672 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 7673 if (rc != 0) { 7674 pr_err("error %d\n", rc); 7675 goto rw_error; 7676 } 7677 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 16, 0); 7678 if (rc != 0) { 7679 pr_err("error %d\n", rc); 7680 goto rw_error; 7681 } 7682 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 7683 if (rc != 0) { 7684 pr_err("error %d\n", rc); 7685 goto rw_error; 7686 } 7687 7688 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 8, 0); 7689 if (rc != 0) { 7690 pr_err("error %d\n", rc); 7691 goto rw_error; 7692 } 7693 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 74, 0); 7694 if (rc != 0) { 7695 pr_err("error %d\n", rc); 7696 goto rw_error; 7697 } 7698 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 18, 0); 7699 if (rc != 0) { 7700 pr_err("error %d\n", rc); 7701 goto rw_error; 7702 } 7703 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 13, 0); 7704 if (rc != 0) { 7705 pr_err("error %d\n", rc); 7706 goto rw_error; 7707 } 7708 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, 7, 0); 7709 if (rc != 0) { 7710 pr_err("error %d\n", rc); 7711 goto rw_error; 7712 } 7713 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, 0, 0); 7714 if (rc != 0) { 7715 pr_err("error %d\n", rc); 7716 goto rw_error; 7717 } 7718 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-8), 0); 7719 if (rc != 0) { 7720 pr_err("error %d\n", rc); 7721 goto rw_error; 7722 } 7723 7724 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7725 if (rc != 0) { 7726 pr_err("error %d\n", rc); 7727 goto rw_error; 7728 } 7729 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7730 if (rc != 0) { 7731 pr_err("error %d\n", rc); 7732 goto rw_error; 7733 } 7734 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7735 if (rc != 0) { 7736 pr_err("error %d\n", rc); 7737 goto rw_error; 7738 } 7739 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50, 0); 7740 if (rc != 0) { 7741 pr_err("error %d\n", rc); 7742 goto rw_error; 7743 } 7744 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7745 if (rc != 0) { 7746 pr_err("error %d\n", rc); 7747 goto rw_error; 7748 } 7749 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7750 if (rc != 0) { 7751 pr_err("error %d\n", rc); 7752 goto rw_error; 7753 } 7754 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 25, 0); 7755 if (rc != 0) { 7756 pr_err("error %d\n", rc); 7757 goto rw_error; 7758 } 7759 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 80, 0); 7760 if (rc != 0) { 7761 pr_err("error %d\n", rc); 7762 goto rw_error; 7763 } 7764 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7765 if (rc != 0) { 7766 pr_err("error %d\n", rc); 7767 goto rw_error; 7768 } 7769 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7770 if (rc != 0) { 7771 pr_err("error %d\n", rc); 7772 goto rw_error; 7773 } 7774 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7775 if (rc != 0) { 7776 pr_err("error %d\n", rc); 7777 goto rw_error; 7778 } 7779 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7780 if (rc != 0) { 7781 pr_err("error %d\n", rc); 7782 goto rw_error; 7783 } 7784 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7785 if (rc != 0) { 7786 pr_err("error %d\n", rc); 7787 goto rw_error; 7788 } 7789 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7790 if (rc != 0) { 7791 pr_err("error %d\n", rc); 7792 goto rw_error; 7793 } 7794 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7795 if (rc != 0) { 7796 pr_err("error %d\n", rc); 7797 goto rw_error; 7798 } 7799 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 48, 0); 7800 if (rc != 0) { 7801 pr_err("error %d\n", rc); 7802 goto rw_error; 7803 } 7804 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 80, 0); 7805 if (rc != 0) { 7806 pr_err("error %d\n", rc); 7807 goto rw_error; 7808 } 7809 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7810 if (rc != 0) { 7811 pr_err("error %d\n", rc); 7812 goto rw_error; 7813 } 7814 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7815 if (rc != 0) { 7816 pr_err("error %d\n", rc); 7817 goto rw_error; 7818 } 7819 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 16, 0); 7820 if (rc != 0) { 7821 pr_err("error %d\n", rc); 7822 goto rw_error; 7823 } 7824 7825 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 43520, 0); 7826 if (rc != 0) { 7827 pr_err("error %d\n", rc); 7828 goto rw_error; 7829 } 7830 7831 return 0; 7832 rw_error: 7833 return rc; 7834 } 7835 7836 /*============================================================================*/ 7837 #define QAM_SET_OP_ALL 0x1 7838 #define QAM_SET_OP_CONSTELLATION 0x2 7839 #define QAM_SET_OP_SPECTRUM 0X4 7840 7841 /* 7842 * \fn int set_qam () 7843 * \brief Set QAM demod. 7844 * \param demod: instance of demod. 7845 * \param channel: pointer to channel data. 7846 * \return int. 7847 */ 7848 static int 7849 set_qam(struct drx_demod_instance *demod, 7850 struct drx_channel *channel, s32 tuner_freq_offset, u32 op) 7851 { 7852 struct i2c_device_addr *dev_addr = NULL; 7853 struct drxj_data *ext_attr = NULL; 7854 struct drx_common_attr *common_attr = NULL; 7855 int rc; 7856 u32 adc_frequency = 0; 7857 u32 iqm_rc_rate = 0; 7858 u16 cmd_result = 0; 7859 u16 lc_symbol_freq = 0; 7860 u16 iqm_rc_stretch = 0; 7861 u16 set_env_parameters = 0; 7862 u16 set_param_parameters[2] = { 0 }; 7863 struct drxjscu_cmd cmd_scu = { /* command */ 0, 7864 /* parameter_len */ 0, 7865 /* result_len */ 0, 7866 /* parameter */ NULL, 7867 /* result */ NULL 7868 }; 7869 static const u8 qam_a_taps[] = { 7870 DRXJ_16TO8(-1), /* re0 */ 7871 DRXJ_16TO8(1), /* re1 */ 7872 DRXJ_16TO8(1), /* re2 */ 7873 DRXJ_16TO8(-1), /* re3 */ 7874 DRXJ_16TO8(-1), /* re4 */ 7875 DRXJ_16TO8(2), /* re5 */ 7876 DRXJ_16TO8(1), /* re6 */ 7877 DRXJ_16TO8(-2), /* re7 */ 7878 DRXJ_16TO8(0), /* re8 */ 7879 DRXJ_16TO8(3), /* re9 */ 7880 DRXJ_16TO8(-1), /* re10 */ 7881 DRXJ_16TO8(-3), /* re11 */ 7882 DRXJ_16TO8(4), /* re12 */ 7883 DRXJ_16TO8(1), /* re13 */ 7884 DRXJ_16TO8(-8), /* re14 */ 7885 DRXJ_16TO8(4), /* re15 */ 7886 DRXJ_16TO8(13), /* re16 */ 7887 DRXJ_16TO8(-13), /* re17 */ 7888 DRXJ_16TO8(-19), /* re18 */ 7889 DRXJ_16TO8(28), /* re19 */ 7890 DRXJ_16TO8(25), /* re20 */ 7891 DRXJ_16TO8(-53), /* re21 */ 7892 DRXJ_16TO8(-31), /* re22 */ 7893 DRXJ_16TO8(96), /* re23 */ 7894 DRXJ_16TO8(37), /* re24 */ 7895 DRXJ_16TO8(-190), /* re25 */ 7896 DRXJ_16TO8(-40), /* re26 */ 7897 DRXJ_16TO8(619) /* re27 */ 7898 }; 7899 static const u8 qam_b64_taps[] = { 7900 DRXJ_16TO8(0), /* re0 */ 7901 DRXJ_16TO8(-2), /* re1 */ 7902 DRXJ_16TO8(1), /* re2 */ 7903 DRXJ_16TO8(2), /* re3 */ 7904 DRXJ_16TO8(-2), /* re4 */ 7905 DRXJ_16TO8(0), /* re5 */ 7906 DRXJ_16TO8(4), /* re6 */ 7907 DRXJ_16TO8(-2), /* re7 */ 7908 DRXJ_16TO8(-4), /* re8 */ 7909 DRXJ_16TO8(4), /* re9 */ 7910 DRXJ_16TO8(3), /* re10 */ 7911 DRXJ_16TO8(-6), /* re11 */ 7912 DRXJ_16TO8(0), /* re12 */ 7913 DRXJ_16TO8(6), /* re13 */ 7914 DRXJ_16TO8(-5), /* re14 */ 7915 DRXJ_16TO8(-3), /* re15 */ 7916 DRXJ_16TO8(11), /* re16 */ 7917 DRXJ_16TO8(-4), /* re17 */ 7918 DRXJ_16TO8(-19), /* re18 */ 7919 DRXJ_16TO8(19), /* re19 */ 7920 DRXJ_16TO8(28), /* re20 */ 7921 DRXJ_16TO8(-45), /* re21 */ 7922 DRXJ_16TO8(-36), /* re22 */ 7923 DRXJ_16TO8(90), /* re23 */ 7924 DRXJ_16TO8(42), /* re24 */ 7925 DRXJ_16TO8(-185), /* re25 */ 7926 DRXJ_16TO8(-46), /* re26 */ 7927 DRXJ_16TO8(614) /* re27 */ 7928 }; 7929 static const u8 qam_b256_taps[] = { 7930 DRXJ_16TO8(-2), /* re0 */ 7931 DRXJ_16TO8(4), /* re1 */ 7932 DRXJ_16TO8(1), /* re2 */ 7933 DRXJ_16TO8(-4), /* re3 */ 7934 DRXJ_16TO8(0), /* re4 */ 7935 DRXJ_16TO8(4), /* re5 */ 7936 DRXJ_16TO8(-2), /* re6 */ 7937 DRXJ_16TO8(-4), /* re7 */ 7938 DRXJ_16TO8(5), /* re8 */ 7939 DRXJ_16TO8(2), /* re9 */ 7940 DRXJ_16TO8(-8), /* re10 */ 7941 DRXJ_16TO8(2), /* re11 */ 7942 DRXJ_16TO8(11), /* re12 */ 7943 DRXJ_16TO8(-8), /* re13 */ 7944 DRXJ_16TO8(-15), /* re14 */ 7945 DRXJ_16TO8(16), /* re15 */ 7946 DRXJ_16TO8(19), /* re16 */ 7947 DRXJ_16TO8(-27), /* re17 */ 7948 DRXJ_16TO8(-22), /* re18 */ 7949 DRXJ_16TO8(44), /* re19 */ 7950 DRXJ_16TO8(26), /* re20 */ 7951 DRXJ_16TO8(-69), /* re21 */ 7952 DRXJ_16TO8(-28), /* re22 */ 7953 DRXJ_16TO8(110), /* re23 */ 7954 DRXJ_16TO8(31), /* re24 */ 7955 DRXJ_16TO8(-201), /* re25 */ 7956 DRXJ_16TO8(-32), /* re26 */ 7957 DRXJ_16TO8(628) /* re27 */ 7958 }; 7959 static const u8 qam_c_taps[] = { 7960 DRXJ_16TO8(-3), /* re0 */ 7961 DRXJ_16TO8(3), /* re1 */ 7962 DRXJ_16TO8(2), /* re2 */ 7963 DRXJ_16TO8(-4), /* re3 */ 7964 DRXJ_16TO8(0), /* re4 */ 7965 DRXJ_16TO8(4), /* re5 */ 7966 DRXJ_16TO8(-1), /* re6 */ 7967 DRXJ_16TO8(-4), /* re7 */ 7968 DRXJ_16TO8(3), /* re8 */ 7969 DRXJ_16TO8(3), /* re9 */ 7970 DRXJ_16TO8(-5), /* re10 */ 7971 DRXJ_16TO8(0), /* re11 */ 7972 DRXJ_16TO8(9), /* re12 */ 7973 DRXJ_16TO8(-4), /* re13 */ 7974 DRXJ_16TO8(-12), /* re14 */ 7975 DRXJ_16TO8(10), /* re15 */ 7976 DRXJ_16TO8(16), /* re16 */ 7977 DRXJ_16TO8(-21), /* re17 */ 7978 DRXJ_16TO8(-20), /* re18 */ 7979 DRXJ_16TO8(37), /* re19 */ 7980 DRXJ_16TO8(25), /* re20 */ 7981 DRXJ_16TO8(-62), /* re21 */ 7982 DRXJ_16TO8(-28), /* re22 */ 7983 DRXJ_16TO8(105), /* re23 */ 7984 DRXJ_16TO8(31), /* re24 */ 7985 DRXJ_16TO8(-197), /* re25 */ 7986 DRXJ_16TO8(-33), /* re26 */ 7987 DRXJ_16TO8(626) /* re27 */ 7988 }; 7989 7990 dev_addr = demod->my_i2c_dev_addr; 7991 ext_attr = (struct drxj_data *) demod->my_ext_attr; 7992 common_attr = (struct drx_common_attr *) demod->my_common_attr; 7993 7994 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 7995 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 7996 switch (channel->constellation) { 7997 case DRX_CONSTELLATION_QAM256: 7998 iqm_rc_rate = 0x00AE3562; 7999 lc_symbol_freq = 8000 QAM_LC_SYMBOL_FREQ_FREQ_QAM_B_256; 8001 channel->symbolrate = 5360537; 8002 iqm_rc_stretch = IQM_RC_STRETCH_QAM_B_256; 8003 break; 8004 case DRX_CONSTELLATION_QAM64: 8005 iqm_rc_rate = 0x00C05A0E; 8006 lc_symbol_freq = 409; 8007 channel->symbolrate = 5056941; 8008 iqm_rc_stretch = IQM_RC_STRETCH_QAM_B_64; 8009 break; 8010 default: 8011 return -EINVAL; 8012 } 8013 } else { 8014 adc_frequency = (common_attr->sys_clock_freq * 1000) / 3; 8015 if (channel->symbolrate == 0) { 8016 pr_err("error: channel symbolrate is zero!\n"); 8017 return -EIO; 8018 } 8019 iqm_rc_rate = 8020 (adc_frequency / channel->symbolrate) * (1 << 21) + 8021 (frac28 8022 ((adc_frequency % channel->symbolrate), 8023 channel->symbolrate) >> 7) - (1 << 23); 8024 lc_symbol_freq = 8025 (u16) (frac28 8026 (channel->symbolrate + 8027 (adc_frequency >> 13), 8028 adc_frequency) >> 16); 8029 if (lc_symbol_freq > 511) 8030 lc_symbol_freq = 511; 8031 8032 iqm_rc_stretch = 21; 8033 } 8034 8035 if (ext_attr->standard == DRX_STANDARD_ITU_A) { 8036 set_env_parameters = QAM_TOP_ANNEX_A; /* annex */ 8037 set_param_parameters[0] = channel->constellation; /* constellation */ 8038 set_param_parameters[1] = DRX_INTERLEAVEMODE_I12_J17; /* interleave mode */ 8039 } else if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8040 set_env_parameters = QAM_TOP_ANNEX_B; /* annex */ 8041 set_param_parameters[0] = channel->constellation; /* constellation */ 8042 set_param_parameters[1] = channel->interleavemode; /* interleave mode */ 8043 } else if (ext_attr->standard == DRX_STANDARD_ITU_C) { 8044 set_env_parameters = QAM_TOP_ANNEX_C; /* annex */ 8045 set_param_parameters[0] = channel->constellation; /* constellation */ 8046 set_param_parameters[1] = DRX_INTERLEAVEMODE_I12_J17; /* interleave mode */ 8047 } else { 8048 return -EINVAL; 8049 } 8050 } 8051 8052 if (op & QAM_SET_OP_ALL) { 8053 /* 8054 STEP 1: reset demodulator 8055 resets IQM, QAM and FEC HW blocks 8056 resets SCU variables 8057 */ 8058 /* stop all comm_exec */ 8059 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 8060 if (rc != 0) { 8061 pr_err("error %d\n", rc); 8062 goto rw_error; 8063 } 8064 rc = drxj_dap_write_reg16(dev_addr, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP, 0); 8065 if (rc != 0) { 8066 pr_err("error %d\n", rc); 8067 goto rw_error; 8068 } 8069 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 8070 if (rc != 0) { 8071 pr_err("error %d\n", rc); 8072 goto rw_error; 8073 } 8074 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 8075 if (rc != 0) { 8076 pr_err("error %d\n", rc); 8077 goto rw_error; 8078 } 8079 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 8080 if (rc != 0) { 8081 pr_err("error %d\n", rc); 8082 goto rw_error; 8083 } 8084 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 8085 if (rc != 0) { 8086 pr_err("error %d\n", rc); 8087 goto rw_error; 8088 } 8089 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 8090 if (rc != 0) { 8091 pr_err("error %d\n", rc); 8092 goto rw_error; 8093 } 8094 8095 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8096 SCU_RAM_COMMAND_CMD_DEMOD_RESET; 8097 cmd_scu.parameter_len = 0; 8098 cmd_scu.result_len = 1; 8099 cmd_scu.parameter = NULL; 8100 cmd_scu.result = &cmd_result; 8101 rc = scu_command(dev_addr, &cmd_scu); 8102 if (rc != 0) { 8103 pr_err("error %d\n", rc); 8104 goto rw_error; 8105 } 8106 } 8107 8108 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8109 /* 8110 STEP 2: configure demodulator 8111 -set env 8112 -set params (resets IQM,QAM,FEC HW; initializes some SCU variables ) 8113 */ 8114 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8115 SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV; 8116 cmd_scu.parameter_len = 1; 8117 cmd_scu.result_len = 1; 8118 cmd_scu.parameter = &set_env_parameters; 8119 cmd_scu.result = &cmd_result; 8120 rc = scu_command(dev_addr, &cmd_scu); 8121 if (rc != 0) { 8122 pr_err("error %d\n", rc); 8123 goto rw_error; 8124 } 8125 8126 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8127 SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM; 8128 cmd_scu.parameter_len = 2; 8129 cmd_scu.result_len = 1; 8130 cmd_scu.parameter = set_param_parameters; 8131 cmd_scu.result = &cmd_result; 8132 rc = scu_command(dev_addr, &cmd_scu); 8133 if (rc != 0) { 8134 pr_err("error %d\n", rc); 8135 goto rw_error; 8136 } 8137 /* set symbol rate */ 8138 rc = drxdap_fasi_write_reg32(dev_addr, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate, 0); 8139 if (rc != 0) { 8140 pr_err("error %d\n", rc); 8141 goto rw_error; 8142 } 8143 ext_attr->iqm_rc_rate_ofs = iqm_rc_rate; 8144 rc = set_qam_measurement(demod, channel->constellation, channel->symbolrate); 8145 if (rc != 0) { 8146 pr_err("error %d\n", rc); 8147 goto rw_error; 8148 } 8149 } 8150 /* STEP 3: enable the system in a mode where the ADC provides valid signal 8151 setup constellation independent registers */ 8152 /* from qam_cmd.py script (qam_driver_b) */ 8153 /* TODO: remove re-writes of HW reset values */ 8154 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_SPECTRUM)) { 8155 rc = set_frequency(demod, channel, tuner_freq_offset); 8156 if (rc != 0) { 8157 pr_err("error %d\n", rc); 8158 goto rw_error; 8159 } 8160 } 8161 8162 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8163 8164 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_SYMBOL_FREQ__A, lc_symbol_freq, 0); 8165 if (rc != 0) { 8166 pr_err("error %d\n", rc); 8167 goto rw_error; 8168 } 8169 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_STRETCH__A, iqm_rc_stretch, 0); 8170 if (rc != 0) { 8171 pr_err("error %d\n", rc); 8172 goto rw_error; 8173 } 8174 } 8175 8176 if (op & QAM_SET_OP_ALL) { 8177 if (!ext_attr->has_lna) { 8178 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AMUX__A, 0x02, 0); 8179 if (rc != 0) { 8180 pr_err("error %d\n", rc); 8181 goto rw_error; 8182 } 8183 } 8184 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SYMMETRIC__A, 0, 0); 8185 if (rc != 0) { 8186 pr_err("error %d\n", rc); 8187 goto rw_error; 8188 } 8189 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_MIDTAP__A, 3, 0); 8190 if (rc != 0) { 8191 pr_err("error %d\n", rc); 8192 goto rw_error; 8193 } 8194 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_OUT_ENA__A, IQM_CF_OUT_ENA_QAM__M, 0); 8195 if (rc != 0) { 8196 pr_err("error %d\n", rc); 8197 goto rw_error; 8198 } 8199 8200 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_WR_RSV_0__A, 0x5f, 0); 8201 if (rc != 0) { 8202 pr_err("error %d\n", rc); 8203 goto rw_error; 8204 } /* scu temporary shut down agc */ 8205 8206 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_SYNC_SEL__A, 3, 0); 8207 if (rc != 0) { 8208 pr_err("error %d\n", rc); 8209 goto rw_error; 8210 } 8211 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_LEN__A, 0, 0); 8212 if (rc != 0) { 8213 pr_err("error %d\n", rc); 8214 goto rw_error; 8215 } 8216 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_TH__A, 448, 0); 8217 if (rc != 0) { 8218 pr_err("error %d\n", rc); 8219 goto rw_error; 8220 } 8221 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_SNS_LEN__A, 0, 0); 8222 if (rc != 0) { 8223 pr_err("error %d\n", rc); 8224 goto rw_error; 8225 } 8226 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PDREF__A, 4, 0); 8227 if (rc != 0) { 8228 pr_err("error %d\n", rc); 8229 goto rw_error; 8230 } 8231 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, 0x10, 0); 8232 if (rc != 0) { 8233 pr_err("error %d\n", rc); 8234 goto rw_error; 8235 } 8236 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PGA_GAIN__A, 11, 0); 8237 if (rc != 0) { 8238 pr_err("error %d\n", rc); 8239 goto rw_error; 8240 } 8241 8242 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_POW_MEAS_LEN__A, 1, 0); 8243 if (rc != 0) { 8244 pr_err("error %d\n", rc); 8245 goto rw_error; 8246 } 8247 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE, 0); 8248 if (rc != 0) { 8249 pr_err("error %d\n", rc); 8250 goto rw_error; 8251 } /*! reset default val ! */ 8252 8253 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE, 0); 8254 if (rc != 0) { 8255 pr_err("error %d\n", rc); 8256 goto rw_error; 8257 } /*! reset default val ! */ 8258 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8259 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_LWM__A, QAM_SY_SYNC_LWM__PRE, 0); 8260 if (rc != 0) { 8261 pr_err("error %d\n", rc); 8262 goto rw_error; 8263 } /*! reset default val ! */ 8264 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_AWM__A, QAM_SY_SYNC_AWM__PRE, 0); 8265 if (rc != 0) { 8266 pr_err("error %d\n", rc); 8267 goto rw_error; 8268 } /*! reset default val ! */ 8269 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_HWM__A, QAM_SY_SYNC_HWM__PRE, 0); 8270 if (rc != 0) { 8271 pr_err("error %d\n", rc); 8272 goto rw_error; 8273 } /*! reset default val ! */ 8274 } else { 8275 switch (channel->constellation) { 8276 case DRX_CONSTELLATION_QAM16: 8277 case DRX_CONSTELLATION_QAM64: 8278 case DRX_CONSTELLATION_QAM256: 8279 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_LWM__A, 0x03, 0); 8280 if (rc != 0) { 8281 pr_err("error %d\n", rc); 8282 goto rw_error; 8283 } 8284 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_AWM__A, 0x04, 0); 8285 if (rc != 0) { 8286 pr_err("error %d\n", rc); 8287 goto rw_error; 8288 } 8289 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_HWM__A, QAM_SY_SYNC_HWM__PRE, 0); 8290 if (rc != 0) { 8291 pr_err("error %d\n", rc); 8292 goto rw_error; 8293 } /*! reset default val ! */ 8294 break; 8295 case DRX_CONSTELLATION_QAM32: 8296 case DRX_CONSTELLATION_QAM128: 8297 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_LWM__A, 0x03, 0); 8298 if (rc != 0) { 8299 pr_err("error %d\n", rc); 8300 goto rw_error; 8301 } 8302 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_AWM__A, 0x05, 0); 8303 if (rc != 0) { 8304 pr_err("error %d\n", rc); 8305 goto rw_error; 8306 } 8307 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_HWM__A, 0x06, 0); 8308 if (rc != 0) { 8309 pr_err("error %d\n", rc); 8310 goto rw_error; 8311 } 8312 break; 8313 default: 8314 return -EIO; 8315 } /* switch */ 8316 } 8317 8318 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_MODE__A, QAM_LC_MODE__PRE, 0); 8319 if (rc != 0) { 8320 pr_err("error %d\n", rc); 8321 goto rw_error; 8322 } /*! reset default val ! */ 8323 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_RATE_LIMIT__A, 3, 0); 8324 if (rc != 0) { 8325 pr_err("error %d\n", rc); 8326 goto rw_error; 8327 } 8328 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_LPF_FACTORP__A, 4, 0); 8329 if (rc != 0) { 8330 pr_err("error %d\n", rc); 8331 goto rw_error; 8332 } 8333 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_LPF_FACTORI__A, 4, 0); 8334 if (rc != 0) { 8335 pr_err("error %d\n", rc); 8336 goto rw_error; 8337 } 8338 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_MODE__A, 7, 0); 8339 if (rc != 0) { 8340 pr_err("error %d\n", rc); 8341 goto rw_error; 8342 } 8343 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB0__A, 1, 0); 8344 if (rc != 0) { 8345 pr_err("error %d\n", rc); 8346 goto rw_error; 8347 } 8348 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB1__A, 1, 0); 8349 if (rc != 0) { 8350 pr_err("error %d\n", rc); 8351 goto rw_error; 8352 } 8353 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB2__A, 1, 0); 8354 if (rc != 0) { 8355 pr_err("error %d\n", rc); 8356 goto rw_error; 8357 } 8358 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB3__A, 1, 0); 8359 if (rc != 0) { 8360 pr_err("error %d\n", rc); 8361 goto rw_error; 8362 } 8363 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB4__A, 2, 0); 8364 if (rc != 0) { 8365 pr_err("error %d\n", rc); 8366 goto rw_error; 8367 } 8368 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB5__A, 2, 0); 8369 if (rc != 0) { 8370 pr_err("error %d\n", rc); 8371 goto rw_error; 8372 } 8373 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB6__A, 2, 0); 8374 if (rc != 0) { 8375 pr_err("error %d\n", rc); 8376 goto rw_error; 8377 } 8378 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB8__A, 2, 0); 8379 if (rc != 0) { 8380 pr_err("error %d\n", rc); 8381 goto rw_error; 8382 } 8383 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB9__A, 2, 0); 8384 if (rc != 0) { 8385 pr_err("error %d\n", rc); 8386 goto rw_error; 8387 } 8388 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB10__A, 2, 0); 8389 if (rc != 0) { 8390 pr_err("error %d\n", rc); 8391 goto rw_error; 8392 } 8393 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB12__A, 2, 0); 8394 if (rc != 0) { 8395 pr_err("error %d\n", rc); 8396 goto rw_error; 8397 } 8398 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB15__A, 3, 0); 8399 if (rc != 0) { 8400 pr_err("error %d\n", rc); 8401 goto rw_error; 8402 } 8403 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB16__A, 3, 0); 8404 if (rc != 0) { 8405 pr_err("error %d\n", rc); 8406 goto rw_error; 8407 } 8408 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB20__A, 4, 0); 8409 if (rc != 0) { 8410 pr_err("error %d\n", rc); 8411 goto rw_error; 8412 } 8413 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB25__A, 4, 0); 8414 if (rc != 0) { 8415 pr_err("error %d\n", rc); 8416 goto rw_error; 8417 } 8418 8419 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_ADJ_SEL__A, 1, 0); 8420 if (rc != 0) { 8421 pr_err("error %d\n", rc); 8422 goto rw_error; 8423 } 8424 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_ADJ_SEL__A, 1, 0); 8425 if (rc != 0) { 8426 pr_err("error %d\n", rc); 8427 goto rw_error; 8428 } 8429 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_ADJ_SEL__A, 1, 0); 8430 if (rc != 0) { 8431 pr_err("error %d\n", rc); 8432 goto rw_error; 8433 } 8434 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_POW_MEAS_LEN__A, 0, 0); 8435 if (rc != 0) { 8436 pr_err("error %d\n", rc); 8437 goto rw_error; 8438 } 8439 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_GPIO__A, 0, 0); 8440 if (rc != 0) { 8441 pr_err("error %d\n", rc); 8442 goto rw_error; 8443 } 8444 8445 /* No more resets of the IQM, current standard correctly set => 8446 now AGCs can be configured. */ 8447 /* turn on IQMAF. It has to be in front of setAgc**() */ 8448 rc = set_iqm_af(demod, true); 8449 if (rc != 0) { 8450 pr_err("error %d\n", rc); 8451 goto rw_error; 8452 } 8453 rc = adc_synchronization(demod); 8454 if (rc != 0) { 8455 pr_err("error %d\n", rc); 8456 goto rw_error; 8457 } 8458 8459 rc = init_agc(demod); 8460 if (rc != 0) { 8461 pr_err("error %d\n", rc); 8462 goto rw_error; 8463 } 8464 rc = set_agc_if(demod, &(ext_attr->qam_if_agc_cfg), false); 8465 if (rc != 0) { 8466 pr_err("error %d\n", rc); 8467 goto rw_error; 8468 } 8469 rc = set_agc_rf(demod, &(ext_attr->qam_rf_agc_cfg), false); 8470 if (rc != 0) { 8471 pr_err("error %d\n", rc); 8472 goto rw_error; 8473 } 8474 { 8475 /* TODO fix this, store a struct drxj_cfg_afe_gain structure in struct drxj_data instead 8476 of only the gain */ 8477 struct drxj_cfg_afe_gain qam_pga_cfg = { DRX_STANDARD_ITU_B, 0 }; 8478 8479 qam_pga_cfg.gain = ext_attr->qam_pga_cfg; 8480 rc = ctrl_set_cfg_afe_gain(demod, &qam_pga_cfg); 8481 if (rc != 0) { 8482 pr_err("error %d\n", rc); 8483 goto rw_error; 8484 } 8485 } 8486 rc = ctrl_set_cfg_pre_saw(demod, &(ext_attr->qam_pre_saw_cfg)); 8487 if (rc != 0) { 8488 pr_err("error %d\n", rc); 8489 goto rw_error; 8490 } 8491 } 8492 8493 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8494 if (ext_attr->standard == DRX_STANDARD_ITU_A) { 8495 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_a_taps), ((u8 *)qam_a_taps), 0); 8496 if (rc != 0) { 8497 pr_err("error %d\n", rc); 8498 goto rw_error; 8499 } 8500 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_a_taps), ((u8 *)qam_a_taps), 0); 8501 if (rc != 0) { 8502 pr_err("error %d\n", rc); 8503 goto rw_error; 8504 } 8505 } else if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8506 switch (channel->constellation) { 8507 case DRX_CONSTELLATION_QAM64: 8508 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_b64_taps), ((u8 *)qam_b64_taps), 0); 8509 if (rc != 0) { 8510 pr_err("error %d\n", rc); 8511 goto rw_error; 8512 } 8513 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_b64_taps), ((u8 *)qam_b64_taps), 0); 8514 if (rc != 0) { 8515 pr_err("error %d\n", rc); 8516 goto rw_error; 8517 } 8518 break; 8519 case DRX_CONSTELLATION_QAM256: 8520 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_b256_taps), ((u8 *)qam_b256_taps), 0); 8521 if (rc != 0) { 8522 pr_err("error %d\n", rc); 8523 goto rw_error; 8524 } 8525 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_b256_taps), ((u8 *)qam_b256_taps), 0); 8526 if (rc != 0) { 8527 pr_err("error %d\n", rc); 8528 goto rw_error; 8529 } 8530 break; 8531 default: 8532 return -EIO; 8533 } 8534 } else if (ext_attr->standard == DRX_STANDARD_ITU_C) { 8535 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_c_taps), ((u8 *)qam_c_taps), 0); 8536 if (rc != 0) { 8537 pr_err("error %d\n", rc); 8538 goto rw_error; 8539 } 8540 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_c_taps), ((u8 *)qam_c_taps), 0); 8541 if (rc != 0) { 8542 pr_err("error %d\n", rc); 8543 goto rw_error; 8544 } 8545 } 8546 8547 /* SETP 4: constellation specific setup */ 8548 switch (channel->constellation) { 8549 case DRX_CONSTELLATION_QAM16: 8550 rc = set_qam16(demod); 8551 if (rc != 0) { 8552 pr_err("error %d\n", rc); 8553 goto rw_error; 8554 } 8555 break; 8556 case DRX_CONSTELLATION_QAM32: 8557 rc = set_qam32(demod); 8558 if (rc != 0) { 8559 pr_err("error %d\n", rc); 8560 goto rw_error; 8561 } 8562 break; 8563 case DRX_CONSTELLATION_QAM64: 8564 rc = set_qam64(demod); 8565 if (rc != 0) { 8566 pr_err("error %d\n", rc); 8567 goto rw_error; 8568 } 8569 break; 8570 case DRX_CONSTELLATION_QAM128: 8571 rc = set_qam128(demod); 8572 if (rc != 0) { 8573 pr_err("error %d\n", rc); 8574 goto rw_error; 8575 } 8576 break; 8577 case DRX_CONSTELLATION_QAM256: 8578 rc = set_qam256(demod); 8579 if (rc != 0) { 8580 pr_err("error %d\n", rc); 8581 goto rw_error; 8582 } 8583 break; 8584 default: 8585 return -EIO; 8586 } /* switch */ 8587 } 8588 8589 if ((op & QAM_SET_OP_ALL)) { 8590 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE_SH__A, 0, 0); 8591 if (rc != 0) { 8592 pr_err("error %d\n", rc); 8593 goto rw_error; 8594 } 8595 8596 /* Mpeg output has to be in front of FEC active */ 8597 rc = set_mpegtei_handling(demod); 8598 if (rc != 0) { 8599 pr_err("error %d\n", rc); 8600 goto rw_error; 8601 } 8602 rc = bit_reverse_mpeg_output(demod); 8603 if (rc != 0) { 8604 pr_err("error %d\n", rc); 8605 goto rw_error; 8606 } 8607 rc = set_mpeg_start_width(demod); 8608 if (rc != 0) { 8609 pr_err("error %d\n", rc); 8610 goto rw_error; 8611 } 8612 { 8613 /* TODO: move to set_standard after hardware reset value problem is solved */ 8614 /* Configure initial MPEG output */ 8615 struct drx_cfg_mpeg_output cfg_mpeg_output; 8616 8617 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 8618 cfg_mpeg_output.enable_mpeg_output = true; 8619 8620 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 8621 if (rc != 0) { 8622 pr_err("error %d\n", rc); 8623 goto rw_error; 8624 } 8625 } 8626 } 8627 8628 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8629 8630 /* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */ 8631 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8632 SCU_RAM_COMMAND_CMD_DEMOD_START; 8633 cmd_scu.parameter_len = 0; 8634 cmd_scu.result_len = 1; 8635 cmd_scu.parameter = NULL; 8636 cmd_scu.result = &cmd_result; 8637 rc = scu_command(dev_addr, &cmd_scu); 8638 if (rc != 0) { 8639 pr_err("error %d\n", rc); 8640 goto rw_error; 8641 } 8642 } 8643 8644 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_ACTIVE, 0); 8645 if (rc != 0) { 8646 pr_err("error %d\n", rc); 8647 goto rw_error; 8648 } 8649 rc = drxj_dap_write_reg16(dev_addr, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE, 0); 8650 if (rc != 0) { 8651 pr_err("error %d\n", rc); 8652 goto rw_error; 8653 } 8654 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE, 0); 8655 if (rc != 0) { 8656 pr_err("error %d\n", rc); 8657 goto rw_error; 8658 } 8659 8660 return 0; 8661 rw_error: 8662 return rc; 8663 } 8664 8665 /*============================================================================*/ 8666 static int ctrl_get_qam_sig_quality(struct drx_demod_instance *demod); 8667 8668 static int qam_flip_spec(struct drx_demod_instance *demod, struct drx_channel *channel) 8669 { 8670 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 8671 struct drxj_data *ext_attr = demod->my_ext_attr; 8672 int rc; 8673 u32 iqm_fs_rate_ofs = 0; 8674 u32 iqm_fs_rate_lo = 0; 8675 u16 qam_ctl_ena = 0; 8676 u16 data = 0; 8677 u16 equ_mode = 0; 8678 u16 fsm_state = 0; 8679 int i = 0; 8680 int ofsofs = 0; 8681 8682 /* Silence the controlling of lc, equ, and the acquisition state machine */ 8683 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_QAM_CTL_ENA__A, &qam_ctl_ena, 0); 8684 if (rc != 0) { 8685 pr_err("error %d\n", rc); 8686 goto rw_error; 8687 } 8688 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_CTL_ENA__A, qam_ctl_ena & ~(SCU_RAM_QAM_CTL_ENA_ACQ__M | SCU_RAM_QAM_CTL_ENA_EQU__M | SCU_RAM_QAM_CTL_ENA_LC__M), 0); 8689 if (rc != 0) { 8690 pr_err("error %d\n", rc); 8691 goto rw_error; 8692 } 8693 8694 /* freeze the frequency control loop */ 8695 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_CF__A, 0, 0); 8696 if (rc != 0) { 8697 pr_err("error %d\n", rc); 8698 goto rw_error; 8699 } 8700 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_CF1__A, 0, 0); 8701 if (rc != 0) { 8702 pr_err("error %d\n", rc); 8703 goto rw_error; 8704 } 8705 8706 rc = drxj_dap_atomic_read_reg32(dev_addr, IQM_FS_RATE_OFS_LO__A, &iqm_fs_rate_ofs, 0); 8707 if (rc != 0) { 8708 pr_err("error %d\n", rc); 8709 goto rw_error; 8710 } 8711 rc = drxj_dap_atomic_read_reg32(dev_addr, IQM_FS_RATE_LO__A, &iqm_fs_rate_lo, 0); 8712 if (rc != 0) { 8713 pr_err("error %d\n", rc); 8714 goto rw_error; 8715 } 8716 ofsofs = iqm_fs_rate_lo - iqm_fs_rate_ofs; 8717 iqm_fs_rate_ofs = ~iqm_fs_rate_ofs + 1; 8718 iqm_fs_rate_ofs -= 2 * ofsofs; 8719 8720 /* freeze dq/fq updating */ 8721 rc = drxj_dap_read_reg16(dev_addr, QAM_DQ_MODE__A, &data, 0); 8722 if (rc != 0) { 8723 pr_err("error %d\n", rc); 8724 goto rw_error; 8725 } 8726 data = (data & 0xfff9); 8727 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_MODE__A, data, 0); 8728 if (rc != 0) { 8729 pr_err("error %d\n", rc); 8730 goto rw_error; 8731 } 8732 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_MODE__A, data, 0); 8733 if (rc != 0) { 8734 pr_err("error %d\n", rc); 8735 goto rw_error; 8736 } 8737 8738 /* lc_cp / _ci / _ca */ 8739 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_CI__A, 0, 0); 8740 if (rc != 0) { 8741 pr_err("error %d\n", rc); 8742 goto rw_error; 8743 } 8744 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_EP__A, 0, 0); 8745 if (rc != 0) { 8746 pr_err("error %d\n", rc); 8747 goto rw_error; 8748 } 8749 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_LA_FACTOR__A, 0, 0); 8750 if (rc != 0) { 8751 pr_err("error %d\n", rc); 8752 goto rw_error; 8753 } 8754 8755 /* flip the spec */ 8756 rc = drxdap_fasi_write_reg32(dev_addr, IQM_FS_RATE_OFS_LO__A, iqm_fs_rate_ofs, 0); 8757 if (rc != 0) { 8758 pr_err("error %d\n", rc); 8759 goto rw_error; 8760 } 8761 ext_attr->iqm_fs_rate_ofs = iqm_fs_rate_ofs; 8762 ext_attr->pos_image = (ext_attr->pos_image) ? false : true; 8763 8764 /* freeze dq/fq updating */ 8765 rc = drxj_dap_read_reg16(dev_addr, QAM_DQ_MODE__A, &data, 0); 8766 if (rc != 0) { 8767 pr_err("error %d\n", rc); 8768 goto rw_error; 8769 } 8770 equ_mode = data; 8771 data = (data & 0xfff9); 8772 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_MODE__A, data, 0); 8773 if (rc != 0) { 8774 pr_err("error %d\n", rc); 8775 goto rw_error; 8776 } 8777 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_MODE__A, data, 0); 8778 if (rc != 0) { 8779 pr_err("error %d\n", rc); 8780 goto rw_error; 8781 } 8782 8783 for (i = 0; i < 28; i++) { 8784 rc = drxj_dap_read_reg16(dev_addr, QAM_DQ_TAP_IM_EL0__A + (2 * i), &data, 0); 8785 if (rc != 0) { 8786 pr_err("error %d\n", rc); 8787 goto rw_error; 8788 } 8789 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_TAP_IM_EL0__A + (2 * i), -data, 0); 8790 if (rc != 0) { 8791 pr_err("error %d\n", rc); 8792 goto rw_error; 8793 } 8794 } 8795 8796 for (i = 0; i < 24; i++) { 8797 rc = drxj_dap_read_reg16(dev_addr, QAM_FQ_TAP_IM_EL0__A + (2 * i), &data, 0); 8798 if (rc != 0) { 8799 pr_err("error %d\n", rc); 8800 goto rw_error; 8801 } 8802 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_TAP_IM_EL0__A + (2 * i), -data, 0); 8803 if (rc != 0) { 8804 pr_err("error %d\n", rc); 8805 goto rw_error; 8806 } 8807 } 8808 8809 data = equ_mode; 8810 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_MODE__A, data, 0); 8811 if (rc != 0) { 8812 pr_err("error %d\n", rc); 8813 goto rw_error; 8814 } 8815 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_MODE__A, data, 0); 8816 if (rc != 0) { 8817 pr_err("error %d\n", rc); 8818 goto rw_error; 8819 } 8820 8821 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_STATE_TGT__A, 4, 0); 8822 if (rc != 0) { 8823 pr_err("error %d\n", rc); 8824 goto rw_error; 8825 } 8826 8827 i = 0; 8828 while ((fsm_state != 4) && (i++ < 100)) { 8829 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_QAM_FSM_STATE__A, &fsm_state, 0); 8830 if (rc != 0) { 8831 pr_err("error %d\n", rc); 8832 goto rw_error; 8833 } 8834 } 8835 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_CTL_ENA__A, (qam_ctl_ena | 0x0016), 0); 8836 if (rc != 0) { 8837 pr_err("error %d\n", rc); 8838 goto rw_error; 8839 } 8840 8841 return 0; 8842 rw_error: 8843 return rc; 8844 8845 } 8846 8847 #define NO_LOCK 0x0 8848 #define DEMOD_LOCKED 0x1 8849 #define SYNC_FLIPPED 0x2 8850 #define SPEC_MIRRORED 0x4 8851 /* 8852 * \fn int qam64auto () 8853 * \brief auto do sync pattern switching and mirroring. 8854 * \param demod: instance of demod. 8855 * \param channel: pointer to channel data. 8856 * \param tuner_freq_offset: tuner frequency offset. 8857 * \param lock_status: pointer to lock status. 8858 * \return int. 8859 */ 8860 static int 8861 qam64auto(struct drx_demod_instance *demod, 8862 struct drx_channel *channel, 8863 s32 tuner_freq_offset, enum drx_lock_status *lock_status) 8864 { 8865 struct drxj_data *ext_attr = demod->my_ext_attr; 8866 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 8867 struct drx39xxj_state *state = dev_addr->user_data; 8868 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 8869 int rc; 8870 u32 lck_state = NO_LOCK; 8871 u32 start_time = 0; 8872 u32 d_locked_time = 0; 8873 u32 timeout_ofs = 0; 8874 u16 data = 0; 8875 8876 /* external attributes for storing acquired channel constellation */ 8877 *lock_status = DRX_NOT_LOCKED; 8878 start_time = jiffies_to_msecs(jiffies); 8879 lck_state = NO_LOCK; 8880 do { 8881 rc = ctrl_lock_status(demod, lock_status); 8882 if (rc != 0) { 8883 pr_err("error %d\n", rc); 8884 goto rw_error; 8885 } 8886 8887 switch (lck_state) { 8888 case NO_LOCK: 8889 if (*lock_status == DRXJ_DEMOD_LOCK) { 8890 rc = ctrl_get_qam_sig_quality(demod); 8891 if (rc != 0) { 8892 pr_err("error %d\n", rc); 8893 goto rw_error; 8894 } 8895 if (p->cnr.stat[0].svalue > 20800) { 8896 lck_state = DEMOD_LOCKED; 8897 /* some delay to see if fec_lock possible TODO find the right value */ 8898 timeout_ofs += DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME; /* see something, waiting longer */ 8899 d_locked_time = jiffies_to_msecs(jiffies); 8900 } 8901 } 8902 break; 8903 case DEMOD_LOCKED: 8904 if ((*lock_status == DRXJ_DEMOD_LOCK) && /* still demod_lock in 150ms */ 8905 ((jiffies_to_msecs(jiffies) - d_locked_time) > 8906 DRXJ_QAM_FEC_LOCK_WAITTIME)) { 8907 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, &data, 0); 8908 if (rc != 0) { 8909 pr_err("error %d\n", rc); 8910 goto rw_error; 8911 } 8912 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, data | 0x1, 0); 8913 if (rc != 0) { 8914 pr_err("error %d\n", rc); 8915 goto rw_error; 8916 } 8917 lck_state = SYNC_FLIPPED; 8918 msleep(10); 8919 } 8920 break; 8921 case SYNC_FLIPPED: 8922 if (*lock_status == DRXJ_DEMOD_LOCK) { 8923 if (channel->mirror == DRX_MIRROR_AUTO) { 8924 /* flip sync pattern back */ 8925 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, &data, 0); 8926 if (rc != 0) { 8927 pr_err("error %d\n", rc); 8928 goto rw_error; 8929 } 8930 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, data & 0xFFFE, 0); 8931 if (rc != 0) { 8932 pr_err("error %d\n", rc); 8933 goto rw_error; 8934 } 8935 /* flip spectrum */ 8936 ext_attr->mirror = DRX_MIRROR_YES; 8937 rc = qam_flip_spec(demod, channel); 8938 if (rc != 0) { 8939 pr_err("error %d\n", rc); 8940 goto rw_error; 8941 } 8942 lck_state = SPEC_MIRRORED; 8943 /* reset timer TODO: still need 500ms? */ 8944 start_time = d_locked_time = 8945 jiffies_to_msecs(jiffies); 8946 timeout_ofs = 0; 8947 } else { /* no need to wait lock */ 8948 8949 start_time = 8950 jiffies_to_msecs(jiffies) - 8951 DRXJ_QAM_MAX_WAITTIME - timeout_ofs; 8952 } 8953 } 8954 break; 8955 case SPEC_MIRRORED: 8956 if ((*lock_status == DRXJ_DEMOD_LOCK) && /* still demod_lock in 150ms */ 8957 ((jiffies_to_msecs(jiffies) - d_locked_time) > 8958 DRXJ_QAM_FEC_LOCK_WAITTIME)) { 8959 rc = ctrl_get_qam_sig_quality(demod); 8960 if (rc != 0) { 8961 pr_err("error %d\n", rc); 8962 goto rw_error; 8963 } 8964 if (p->cnr.stat[0].svalue > 20800) { 8965 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, &data, 0); 8966 if (rc != 0) { 8967 pr_err("error %d\n", rc); 8968 goto rw_error; 8969 } 8970 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, data | 0x1, 0); 8971 if (rc != 0) { 8972 pr_err("error %d\n", rc); 8973 goto rw_error; 8974 } 8975 /* no need to wait lock */ 8976 start_time = 8977 jiffies_to_msecs(jiffies) - 8978 DRXJ_QAM_MAX_WAITTIME - timeout_ofs; 8979 } 8980 } 8981 break; 8982 default: 8983 break; 8984 } 8985 msleep(10); 8986 } while 8987 ((*lock_status != DRX_LOCKED) && 8988 (*lock_status != DRX_NEVER_LOCK) && 8989 ((jiffies_to_msecs(jiffies) - start_time) < 8990 (DRXJ_QAM_MAX_WAITTIME + timeout_ofs)) 8991 ); 8992 /* Returning control to apllication ... */ 8993 8994 return 0; 8995 rw_error: 8996 return rc; 8997 } 8998 8999 /* 9000 * \fn int qam256auto () 9001 * \brief auto do sync pattern switching and mirroring. 9002 * \param demod: instance of demod. 9003 * \param channel: pointer to channel data. 9004 * \param tuner_freq_offset: tuner frequency offset. 9005 * \param lock_status: pointer to lock status. 9006 * \return int. 9007 */ 9008 static int 9009 qam256auto(struct drx_demod_instance *demod, 9010 struct drx_channel *channel, 9011 s32 tuner_freq_offset, enum drx_lock_status *lock_status) 9012 { 9013 struct drxj_data *ext_attr = demod->my_ext_attr; 9014 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9015 struct drx39xxj_state *state = dev_addr->user_data; 9016 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 9017 int rc; 9018 u32 lck_state = NO_LOCK; 9019 u32 start_time = 0; 9020 u32 d_locked_time = 0; 9021 u32 timeout_ofs = DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME; 9022 9023 /* external attributes for storing acquired channel constellation */ 9024 *lock_status = DRX_NOT_LOCKED; 9025 start_time = jiffies_to_msecs(jiffies); 9026 lck_state = NO_LOCK; 9027 do { 9028 rc = ctrl_lock_status(demod, lock_status); 9029 if (rc != 0) { 9030 pr_err("error %d\n", rc); 9031 goto rw_error; 9032 } 9033 switch (lck_state) { 9034 case NO_LOCK: 9035 if (*lock_status == DRXJ_DEMOD_LOCK) { 9036 rc = ctrl_get_qam_sig_quality(demod); 9037 if (rc != 0) { 9038 pr_err("error %d\n", rc); 9039 goto rw_error; 9040 } 9041 if (p->cnr.stat[0].svalue > 26800) { 9042 lck_state = DEMOD_LOCKED; 9043 timeout_ofs += DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME; /* see something, wait longer */ 9044 d_locked_time = jiffies_to_msecs(jiffies); 9045 } 9046 } 9047 break; 9048 case DEMOD_LOCKED: 9049 if (*lock_status == DRXJ_DEMOD_LOCK) { 9050 if ((channel->mirror == DRX_MIRROR_AUTO) && 9051 ((jiffies_to_msecs(jiffies) - d_locked_time) > 9052 DRXJ_QAM_FEC_LOCK_WAITTIME)) { 9053 ext_attr->mirror = DRX_MIRROR_YES; 9054 rc = qam_flip_spec(demod, channel); 9055 if (rc != 0) { 9056 pr_err("error %d\n", rc); 9057 goto rw_error; 9058 } 9059 lck_state = SPEC_MIRRORED; 9060 /* reset timer TODO: still need 300ms? */ 9061 start_time = jiffies_to_msecs(jiffies); 9062 timeout_ofs = -DRXJ_QAM_MAX_WAITTIME / 2; 9063 } 9064 } 9065 break; 9066 case SPEC_MIRRORED: 9067 break; 9068 default: 9069 break; 9070 } 9071 msleep(10); 9072 } while 9073 ((*lock_status < DRX_LOCKED) && 9074 (*lock_status != DRX_NEVER_LOCK) && 9075 ((jiffies_to_msecs(jiffies) - start_time) < 9076 (DRXJ_QAM_MAX_WAITTIME + timeout_ofs))); 9077 9078 return 0; 9079 rw_error: 9080 return rc; 9081 } 9082 9083 /* 9084 * \fn int set_qam_channel () 9085 * \brief Set QAM channel according to the requested constellation. 9086 * \param demod: instance of demod. 9087 * \param channel: pointer to channel data. 9088 * \return int. 9089 */ 9090 static int 9091 set_qam_channel(struct drx_demod_instance *demod, 9092 struct drx_channel *channel, s32 tuner_freq_offset) 9093 { 9094 struct drxj_data *ext_attr = NULL; 9095 int rc; 9096 enum drx_lock_status lock_status = DRX_NOT_LOCKED; 9097 bool auto_flag = false; 9098 9099 /* external attributes for storing acquired channel constellation */ 9100 ext_attr = (struct drxj_data *) demod->my_ext_attr; 9101 9102 /* set QAM channel constellation */ 9103 switch (channel->constellation) { 9104 case DRX_CONSTELLATION_QAM16: 9105 case DRX_CONSTELLATION_QAM32: 9106 case DRX_CONSTELLATION_QAM128: 9107 return -EINVAL; 9108 case DRX_CONSTELLATION_QAM64: 9109 case DRX_CONSTELLATION_QAM256: 9110 if (ext_attr->standard != DRX_STANDARD_ITU_B) 9111 return -EINVAL; 9112 9113 ext_attr->constellation = channel->constellation; 9114 if (channel->mirror == DRX_MIRROR_AUTO) 9115 ext_attr->mirror = DRX_MIRROR_NO; 9116 else 9117 ext_attr->mirror = channel->mirror; 9118 9119 rc = set_qam(demod, channel, tuner_freq_offset, QAM_SET_OP_ALL); 9120 if (rc != 0) { 9121 pr_err("error %d\n", rc); 9122 goto rw_error; 9123 } 9124 9125 if (channel->constellation == DRX_CONSTELLATION_QAM64) 9126 rc = qam64auto(demod, channel, tuner_freq_offset, 9127 &lock_status); 9128 else 9129 rc = qam256auto(demod, channel, tuner_freq_offset, 9130 &lock_status); 9131 if (rc != 0) { 9132 pr_err("error %d\n", rc); 9133 goto rw_error; 9134 } 9135 break; 9136 case DRX_CONSTELLATION_AUTO: /* for channel scan */ 9137 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 9138 u16 qam_ctl_ena = 0; 9139 9140 auto_flag = true; 9141 9142 /* try to lock default QAM constellation: QAM256 */ 9143 channel->constellation = DRX_CONSTELLATION_QAM256; 9144 ext_attr->constellation = DRX_CONSTELLATION_QAM256; 9145 if (channel->mirror == DRX_MIRROR_AUTO) 9146 ext_attr->mirror = DRX_MIRROR_NO; 9147 else 9148 ext_attr->mirror = channel->mirror; 9149 rc = set_qam(demod, channel, tuner_freq_offset, 9150 QAM_SET_OP_ALL); 9151 if (rc != 0) { 9152 pr_err("error %d\n", rc); 9153 goto rw_error; 9154 } 9155 rc = qam256auto(demod, channel, tuner_freq_offset, 9156 &lock_status); 9157 if (rc != 0) { 9158 pr_err("error %d\n", rc); 9159 goto rw_error; 9160 } 9161 9162 if (lock_status >= DRX_LOCKED) { 9163 channel->constellation = DRX_CONSTELLATION_AUTO; 9164 break; 9165 } 9166 9167 /* QAM254 not locked. Try QAM64 constellation */ 9168 channel->constellation = DRX_CONSTELLATION_QAM64; 9169 ext_attr->constellation = DRX_CONSTELLATION_QAM64; 9170 if (channel->mirror == DRX_MIRROR_AUTO) 9171 ext_attr->mirror = DRX_MIRROR_NO; 9172 else 9173 ext_attr->mirror = channel->mirror; 9174 9175 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, 9176 SCU_RAM_QAM_CTL_ENA__A, 9177 &qam_ctl_ena, 0); 9178 if (rc != 0) { 9179 pr_err("error %d\n", rc); 9180 goto rw_error; 9181 } 9182 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9183 SCU_RAM_QAM_CTL_ENA__A, 9184 qam_ctl_ena & ~SCU_RAM_QAM_CTL_ENA_ACQ__M, 0); 9185 if (rc != 0) { 9186 pr_err("error %d\n", rc); 9187 goto rw_error; 9188 } 9189 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9190 SCU_RAM_QAM_FSM_STATE_TGT__A, 9191 0x2, 0); 9192 if (rc != 0) { 9193 pr_err("error %d\n", rc); 9194 goto rw_error; 9195 } /* force to rate hunting */ 9196 9197 rc = set_qam(demod, channel, tuner_freq_offset, 9198 QAM_SET_OP_CONSTELLATION); 9199 if (rc != 0) { 9200 pr_err("error %d\n", rc); 9201 goto rw_error; 9202 } 9203 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9204 SCU_RAM_QAM_CTL_ENA__A, 9205 qam_ctl_ena, 0); 9206 if (rc != 0) { 9207 pr_err("error %d\n", rc); 9208 goto rw_error; 9209 } 9210 9211 rc = qam64auto(demod, channel, tuner_freq_offset, 9212 &lock_status); 9213 if (rc != 0) { 9214 pr_err("error %d\n", rc); 9215 goto rw_error; 9216 } 9217 9218 channel->constellation = DRX_CONSTELLATION_AUTO; 9219 } else if (ext_attr->standard == DRX_STANDARD_ITU_C) { 9220 u16 qam_ctl_ena = 0; 9221 9222 channel->constellation = DRX_CONSTELLATION_QAM64; 9223 ext_attr->constellation = DRX_CONSTELLATION_QAM64; 9224 auto_flag = true; 9225 9226 if (channel->mirror == DRX_MIRROR_AUTO) 9227 ext_attr->mirror = DRX_MIRROR_NO; 9228 else 9229 ext_attr->mirror = channel->mirror; 9230 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, 9231 SCU_RAM_QAM_CTL_ENA__A, 9232 &qam_ctl_ena, 0); 9233 if (rc != 0) { 9234 pr_err("error %d\n", rc); 9235 goto rw_error; 9236 } 9237 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9238 SCU_RAM_QAM_CTL_ENA__A, 9239 qam_ctl_ena & ~SCU_RAM_QAM_CTL_ENA_ACQ__M, 0); 9240 if (rc != 0) { 9241 pr_err("error %d\n", rc); 9242 goto rw_error; 9243 } 9244 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9245 SCU_RAM_QAM_FSM_STATE_TGT__A, 9246 0x2, 0); 9247 if (rc != 0) { 9248 pr_err("error %d\n", rc); 9249 goto rw_error; 9250 } /* force to rate hunting */ 9251 9252 rc = set_qam(demod, channel, tuner_freq_offset, 9253 QAM_SET_OP_CONSTELLATION); 9254 if (rc != 0) { 9255 pr_err("error %d\n", rc); 9256 goto rw_error; 9257 } 9258 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9259 SCU_RAM_QAM_CTL_ENA__A, 9260 qam_ctl_ena, 0); 9261 if (rc != 0) { 9262 pr_err("error %d\n", rc); 9263 goto rw_error; 9264 } 9265 rc = qam64auto(demod, channel, tuner_freq_offset, 9266 &lock_status); 9267 if (rc != 0) { 9268 pr_err("error %d\n", rc); 9269 goto rw_error; 9270 } 9271 channel->constellation = DRX_CONSTELLATION_AUTO; 9272 } else { 9273 return -EINVAL; 9274 } 9275 break; 9276 default: 9277 return -EINVAL; 9278 } 9279 9280 return 0; 9281 rw_error: 9282 /* restore starting value */ 9283 if (auto_flag) 9284 channel->constellation = DRX_CONSTELLATION_AUTO; 9285 return rc; 9286 } 9287 9288 /*============================================================================*/ 9289 9290 /* 9291 * \fn static short get_qamrs_err_count(struct i2c_device_addr *dev_addr) 9292 * \brief Get RS error count in QAM mode (used for post RS BER calculation) 9293 * \return Error code 9294 * 9295 * precondition: measurement period & measurement prescale must be set 9296 * 9297 */ 9298 static int 9299 get_qamrs_err_count(struct i2c_device_addr *dev_addr, 9300 struct drxjrs_errors *rs_errors) 9301 { 9302 int rc; 9303 u16 nr_bit_errors = 0, 9304 nr_symbol_errors = 0, 9305 nr_packet_errors = 0, nr_failures = 0, nr_snc_par_fail_count = 0; 9306 9307 /* check arguments */ 9308 if (dev_addr == NULL) 9309 return -EINVAL; 9310 9311 /* all reported errors are received in the */ 9312 /* most recently finished measurment period */ 9313 /* no of pre RS bit errors */ 9314 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_BIT_ERRORS__A, &nr_bit_errors, 0); 9315 if (rc != 0) { 9316 pr_err("error %d\n", rc); 9317 goto rw_error; 9318 } 9319 /* no of symbol errors */ 9320 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_SYMBOL_ERRORS__A, &nr_symbol_errors, 0); 9321 if (rc != 0) { 9322 pr_err("error %d\n", rc); 9323 goto rw_error; 9324 } 9325 /* no of packet errors */ 9326 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_PACKET_ERRORS__A, &nr_packet_errors, 0); 9327 if (rc != 0) { 9328 pr_err("error %d\n", rc); 9329 goto rw_error; 9330 } 9331 /* no of failures to decode */ 9332 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_FAILURES__A, &nr_failures, 0); 9333 if (rc != 0) { 9334 pr_err("error %d\n", rc); 9335 goto rw_error; 9336 } 9337 /* no of post RS bit erros */ 9338 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_FAIL_COUNT__A, &nr_snc_par_fail_count, 0); 9339 if (rc != 0) { 9340 pr_err("error %d\n", rc); 9341 goto rw_error; 9342 } 9343 /* TODO: NOTE */ 9344 /* These register values are fetched in non-atomic fashion */ 9345 /* It is possible that the read values contain unrelated information */ 9346 9347 rs_errors->nr_bit_errors = nr_bit_errors & FEC_RS_NR_BIT_ERRORS__M; 9348 rs_errors->nr_symbol_errors = nr_symbol_errors & FEC_RS_NR_SYMBOL_ERRORS__M; 9349 rs_errors->nr_packet_errors = nr_packet_errors & FEC_RS_NR_PACKET_ERRORS__M; 9350 rs_errors->nr_failures = nr_failures & FEC_RS_NR_FAILURES__M; 9351 rs_errors->nr_snc_par_fail_count = 9352 nr_snc_par_fail_count & FEC_OC_SNC_FAIL_COUNT__M; 9353 9354 return 0; 9355 rw_error: 9356 return rc; 9357 } 9358 9359 /*============================================================================*/ 9360 9361 /* 9362 * \fn int get_sig_strength() 9363 * \brief Retrieve signal strength for VSB and QAM. 9364 * \param demod Pointer to demod instance 9365 * \param u16-t Pointer to signal strength data; range 0, .. , 100. 9366 * \return int. 9367 * \retval 0 sig_strength contains valid data. 9368 * \retval -EINVAL sig_strength is NULL. 9369 * \retval -EIO Erroneous data, sig_strength contains invalid data. 9370 */ 9371 #define DRXJ_AGC_TOP 0x2800 9372 #define DRXJ_AGC_SNS 0x1600 9373 #define DRXJ_RFAGC_MAX 0x3fff 9374 #define DRXJ_RFAGC_MIN 0x800 9375 9376 static int get_sig_strength(struct drx_demod_instance *demod, u16 *sig_strength) 9377 { 9378 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9379 int rc; 9380 u16 rf_gain = 0; 9381 u16 if_gain = 0; 9382 u16 if_agc_sns = 0; 9383 u16 if_agc_top = 0; 9384 u16 rf_agc_max = 0; 9385 u16 rf_agc_min = 0; 9386 9387 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_AGC_IF__A, &if_gain, 0); 9388 if (rc != 0) { 9389 pr_err("error %d\n", rc); 9390 goto rw_error; 9391 } 9392 if_gain &= IQM_AF_AGC_IF__M; 9393 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_AGC_RF__A, &rf_gain, 0); 9394 if (rc != 0) { 9395 pr_err("error %d\n", rc); 9396 goto rw_error; 9397 } 9398 rf_gain &= IQM_AF_AGC_RF__M; 9399 9400 if_agc_sns = DRXJ_AGC_SNS; 9401 if_agc_top = DRXJ_AGC_TOP; 9402 rf_agc_max = DRXJ_RFAGC_MAX; 9403 rf_agc_min = DRXJ_RFAGC_MIN; 9404 9405 if (if_gain > if_agc_top) { 9406 if (rf_gain > rf_agc_max) 9407 *sig_strength = 100; 9408 else if (rf_gain > rf_agc_min) { 9409 if (rf_agc_max == rf_agc_min) { 9410 pr_err("error: rf_agc_max == rf_agc_min\n"); 9411 return -EIO; 9412 } 9413 *sig_strength = 9414 75 + 25 * (rf_gain - rf_agc_min) / (rf_agc_max - 9415 rf_agc_min); 9416 } else 9417 *sig_strength = 75; 9418 } else if (if_gain > if_agc_sns) { 9419 if (if_agc_top == if_agc_sns) { 9420 pr_err("error: if_agc_top == if_agc_sns\n"); 9421 return -EIO; 9422 } 9423 *sig_strength = 9424 20 + 55 * (if_gain - if_agc_sns) / (if_agc_top - if_agc_sns); 9425 } else { 9426 if (!if_agc_sns) { 9427 pr_err("error: if_agc_sns is zero!\n"); 9428 return -EIO; 9429 } 9430 *sig_strength = (20 * if_gain / if_agc_sns); 9431 } 9432 9433 if (*sig_strength <= 7) 9434 *sig_strength = 0; 9435 9436 return 0; 9437 rw_error: 9438 return rc; 9439 } 9440 9441 /* 9442 * \fn int ctrl_get_qam_sig_quality() 9443 * \brief Retrieve QAM signal quality from device. 9444 * \param devmod Pointer to demodulator instance. 9445 * \param sig_quality Pointer to signal quality data. 9446 * \return int. 9447 * \retval 0 sig_quality contains valid data. 9448 * \retval -EINVAL sig_quality is NULL. 9449 * \retval -EIO Erroneous data, sig_quality contains invalid data. 9450 9451 * Pre-condition: Device must be started and in lock. 9452 */ 9453 static int 9454 ctrl_get_qam_sig_quality(struct drx_demod_instance *demod) 9455 { 9456 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9457 struct drxj_data *ext_attr = demod->my_ext_attr; 9458 struct drx39xxj_state *state = dev_addr->user_data; 9459 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 9460 struct drxjrs_errors measuredrs_errors = { 0, 0, 0, 0, 0 }; 9461 enum drx_modulation constellation = ext_attr->constellation; 9462 int rc; 9463 9464 u32 pre_bit_err_rs = 0; /* pre RedSolomon Bit Error Rate */ 9465 u32 post_bit_err_rs = 0; /* post RedSolomon Bit Error Rate */ 9466 u32 pkt_errs = 0; /* no of packet errors in RS */ 9467 u16 qam_sl_err_power = 0; /* accumulated error between raw and sliced symbols */ 9468 u16 qsym_err_vd = 0; /* quadrature symbol errors in QAM_VD */ 9469 u16 fec_oc_period = 0; /* SNC sync failure measurement period */ 9470 u16 fec_rs_prescale = 0; /* ReedSolomon Measurement Prescale */ 9471 u16 fec_rs_period = 0; /* Value for corresponding I2C register */ 9472 /* calculation constants */ 9473 u32 rs_bit_cnt = 0; /* RedSolomon Bit Count */ 9474 u32 qam_sl_sig_power = 0; /* used for MER, depends of QAM constellation */ 9475 /* intermediate results */ 9476 u32 e = 0; /* exponent value used for QAM BER/SER */ 9477 u32 m = 0; /* mantisa value used for QAM BER/SER */ 9478 u32 ber_cnt = 0; /* BER count */ 9479 /* signal quality info */ 9480 u32 qam_sl_mer = 0; /* QAM MER */ 9481 u32 qam_pre_rs_ber = 0; /* Pre RedSolomon BER */ 9482 u32 qam_post_rs_ber = 0; /* Post RedSolomon BER */ 9483 u32 qam_vd_ser = 0; /* ViterbiDecoder SER */ 9484 u16 qam_vd_prescale = 0; /* Viterbi Measurement Prescale */ 9485 u16 qam_vd_period = 0; /* Viterbi Measurement period */ 9486 u32 vd_bit_cnt = 0; /* ViterbiDecoder Bit Count */ 9487 9488 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9489 9490 /* read the physical registers */ 9491 /* Get the RS error data */ 9492 rc = get_qamrs_err_count(dev_addr, &measuredrs_errors); 9493 if (rc != 0) { 9494 pr_err("error %d\n", rc); 9495 goto rw_error; 9496 } 9497 /* get the register value needed for MER */ 9498 rc = drxj_dap_read_reg16(dev_addr, QAM_SL_ERR_POWER__A, &qam_sl_err_power, 0); 9499 if (rc != 0) { 9500 pr_err("error %d\n", rc); 9501 goto rw_error; 9502 } 9503 /* get the register value needed for post RS BER */ 9504 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_FAIL_PERIOD__A, &fec_oc_period, 0); 9505 if (rc != 0) { 9506 pr_err("error %d\n", rc); 9507 goto rw_error; 9508 } 9509 9510 /* get constants needed for signal quality calculation */ 9511 fec_rs_period = ext_attr->fec_rs_period; 9512 fec_rs_prescale = ext_attr->fec_rs_prescale; 9513 rs_bit_cnt = fec_rs_period * fec_rs_prescale * ext_attr->fec_rs_plen; 9514 qam_vd_period = ext_attr->qam_vd_period; 9515 qam_vd_prescale = ext_attr->qam_vd_prescale; 9516 vd_bit_cnt = qam_vd_period * qam_vd_prescale * ext_attr->fec_vd_plen; 9517 9518 /* DRXJ_QAM_SL_SIG_POWER_QAMxxx * 4 */ 9519 switch (constellation) { 9520 case DRX_CONSTELLATION_QAM16: 9521 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM16 << 2; 9522 break; 9523 case DRX_CONSTELLATION_QAM32: 9524 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM32 << 2; 9525 break; 9526 case DRX_CONSTELLATION_QAM64: 9527 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM64 << 2; 9528 break; 9529 case DRX_CONSTELLATION_QAM128: 9530 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM128 << 2; 9531 break; 9532 case DRX_CONSTELLATION_QAM256: 9533 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM256 << 2; 9534 break; 9535 default: 9536 return -EIO; 9537 } 9538 9539 /* ------------------------------ */ 9540 /* MER Calculation */ 9541 /* ------------------------------ */ 9542 /* MER is good if it is above 27.5 for QAM256 or 21.5 for QAM64 */ 9543 9544 /* 10.0*log10(qam_sl_sig_power * 4.0 / qam_sl_err_power); */ 9545 if (qam_sl_err_power == 0) 9546 qam_sl_mer = 0; 9547 else 9548 qam_sl_mer = log1_times100(qam_sl_sig_power) - log1_times100((u32)qam_sl_err_power); 9549 9550 /* ----------------------------------------- */ 9551 /* Pre Viterbi Symbol Error Rate Calculation */ 9552 /* ----------------------------------------- */ 9553 /* pre viterbi SER is good if it is below 0.025 */ 9554 9555 /* get the register value */ 9556 /* no of quadrature symbol errors */ 9557 rc = drxj_dap_read_reg16(dev_addr, QAM_VD_NR_QSYM_ERRORS__A, &qsym_err_vd, 0); 9558 if (rc != 0) { 9559 pr_err("error %d\n", rc); 9560 goto rw_error; 9561 } 9562 /* Extract the Exponent and the Mantisa */ 9563 /* of number of quadrature symbol errors */ 9564 e = (qsym_err_vd & QAM_VD_NR_QSYM_ERRORS_EXP__M) >> 9565 QAM_VD_NR_QSYM_ERRORS_EXP__B; 9566 m = (qsym_err_vd & QAM_VD_NR_SYMBOL_ERRORS_FIXED_MANT__M) >> 9567 QAM_VD_NR_SYMBOL_ERRORS_FIXED_MANT__B; 9568 9569 if ((m << e) >> 3 > 549752) 9570 qam_vd_ser = 500000 * vd_bit_cnt * ((e > 2) ? 1 : 8) / 8; 9571 else 9572 qam_vd_ser = m << ((e > 2) ? (e - 3) : e); 9573 9574 /* --------------------------------------- */ 9575 /* pre and post RedSolomon BER Calculation */ 9576 /* --------------------------------------- */ 9577 /* pre RS BER is good if it is below 3.5e-4 */ 9578 9579 /* get the register values */ 9580 pre_bit_err_rs = (u32) measuredrs_errors.nr_bit_errors; 9581 pkt_errs = post_bit_err_rs = (u32) measuredrs_errors.nr_snc_par_fail_count; 9582 9583 /* Extract the Exponent and the Mantisa of the */ 9584 /* pre Reed-Solomon bit error count */ 9585 e = (pre_bit_err_rs & FEC_RS_NR_BIT_ERRORS_EXP__M) >> 9586 FEC_RS_NR_BIT_ERRORS_EXP__B; 9587 m = (pre_bit_err_rs & FEC_RS_NR_BIT_ERRORS_FIXED_MANT__M) >> 9588 FEC_RS_NR_BIT_ERRORS_FIXED_MANT__B; 9589 9590 ber_cnt = m << e; 9591 9592 /*qam_pre_rs_ber = frac_times1e6( ber_cnt, rs_bit_cnt ); */ 9593 if (m > (rs_bit_cnt >> (e + 1)) || (rs_bit_cnt >> e) == 0) 9594 qam_pre_rs_ber = 500000 * rs_bit_cnt >> e; 9595 else 9596 qam_pre_rs_ber = ber_cnt; 9597 9598 /* post RS BER = 1000000* (11.17 * FEC_OC_SNC_FAIL_COUNT__A) / */ 9599 /* (1504.0 * FEC_OC_SNC_FAIL_PERIOD__A) */ 9600 /* 9601 => c = (1000000*100*11.17)/1504 = 9602 post RS BER = (( c* FEC_OC_SNC_FAIL_COUNT__A) / 9603 (100 * FEC_OC_SNC_FAIL_PERIOD__A) 9604 *100 and /100 is for more precision. 9605 => (20 bits * 12 bits) /(16 bits * 7 bits) => safe in 32 bits computation 9606 9607 Precision errors still possible. 9608 */ 9609 if (!fec_oc_period) { 9610 qam_post_rs_ber = 0xFFFFFFFF; 9611 } else { 9612 e = post_bit_err_rs * 742686; 9613 m = fec_oc_period * 100; 9614 qam_post_rs_ber = e / m; 9615 } 9616 9617 /* fill signal quality data structure */ 9618 p->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; 9619 p->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; 9620 p->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; 9621 p->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; 9622 p->block_error.stat[0].scale = FE_SCALE_COUNTER; 9623 p->cnr.stat[0].scale = FE_SCALE_DECIBEL; 9624 9625 p->cnr.stat[0].svalue = ((u16) qam_sl_mer) * 100; 9626 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 9627 p->pre_bit_error.stat[0].uvalue += qam_vd_ser; 9628 p->pre_bit_count.stat[0].uvalue += vd_bit_cnt * ((e > 2) ? 1 : 8) / 8; 9629 } else { 9630 p->pre_bit_error.stat[0].uvalue += qam_pre_rs_ber; 9631 p->pre_bit_count.stat[0].uvalue += rs_bit_cnt >> e; 9632 } 9633 9634 p->post_bit_error.stat[0].uvalue += qam_post_rs_ber; 9635 p->post_bit_count.stat[0].uvalue += rs_bit_cnt >> e; 9636 9637 p->block_error.stat[0].uvalue += pkt_errs; 9638 9639 #ifdef DRXJ_SIGNAL_ACCUM_ERR 9640 rc = get_acc_pkt_err(demod, &sig_quality->packet_error); 9641 if (rc != 0) { 9642 pr_err("error %d\n", rc); 9643 goto rw_error; 9644 } 9645 #endif 9646 9647 return 0; 9648 rw_error: 9649 p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9650 p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9651 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9652 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9653 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9654 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9655 9656 return rc; 9657 } 9658 9659 #endif /* #ifndef DRXJ_VSB_ONLY */ 9660 9661 /*============================================================================*/ 9662 /*== END QAM DATAPATH FUNCTIONS ==*/ 9663 /*============================================================================*/ 9664 9665 /*============================================================================*/ 9666 /*============================================================================*/ 9667 /*== ATV DATAPATH FUNCTIONS ==*/ 9668 /*============================================================================*/ 9669 /*============================================================================*/ 9670 9671 /* 9672 Implementation notes. 9673 9674 NTSC/FM AGCs 9675 9676 Four AGCs are used for NTSC: 9677 (1) RF (used to attenuate the input signal in case of to much power) 9678 (2) IF (used to attenuate the input signal in case of to much power) 9679 (3) Video AGC (used to amplify the output signal in case input to low) 9680 (4) SIF AGC (used to amplify the output signal in case input to low) 9681 9682 Video AGC is coupled to RF and IF. SIF AGC is not coupled. It is assumed 9683 that the coupling between Video AGC and the RF and IF AGCs also works in 9684 favor of the SIF AGC. 9685 9686 Three AGCs are used for FM: 9687 (1) RF (used to attenuate the input signal in case of to much power) 9688 (2) IF (used to attenuate the input signal in case of to much power) 9689 (3) SIF AGC (used to amplify the output signal in case input to low) 9690 9691 The SIF AGC is now coupled to the RF/IF AGCs. 9692 The SIF AGC is needed for both SIF ouput and the internal SIF signal to 9693 the AUD block. 9694 9695 RF and IF AGCs DACs are part of AFE, Video and SIF AGC DACs are part of 9696 the ATV block. The AGC control algorithms are all implemented in 9697 microcode. 9698 9699 ATV SETTINGS 9700 9701 (Shadow settings will not be used for now, they will be implemented 9702 later on because of the schedule) 9703 9704 Several HW/SCU "settings" can be used for ATV. The standard selection 9705 will reset most of these settings. To avoid that the end user apllication 9706 has to perform these settings each time the ATV or FM standards is 9707 selected the driver will shadow these settings. This enables the end user 9708 to perform the settings only once after a drx_open(). The driver must 9709 write the shadow settings to HW/SCU incase: 9710 ( setstandard FM/ATV) || 9711 ( settings have changed && FM/ATV standard is active) 9712 The shadow settings will be stored in the device specific data container. 9713 A set of flags will be defined to flag changes in shadow settings. 9714 A routine will be implemented to write all changed shadow settings to 9715 HW/SCU. 9716 9717 The "settings" will consist of: AGC settings, filter settings etc. 9718 9719 Disadvantage of use of shadow settings: 9720 Direct changes in HW/SCU registers will not be reflected in the 9721 shadow settings and these changes will be overwritten during a next 9722 update. This can happen during evaluation. This will not be a problem 9723 for normal customer usage. 9724 */ 9725 /* -------------------------------------------------------------------------- */ 9726 9727 /* 9728 * \fn int power_down_atv () 9729 * \brief Power down ATV. 9730 * \param demod instance of demodulator 9731 * \param standard either NTSC or FM (sub strandard for ATV ) 9732 * \return int. 9733 * 9734 * Stops and thus resets ATV and IQM block 9735 * SIF and CVBS ADC are powered down 9736 * Calls audio power down 9737 */ 9738 static int 9739 power_down_atv(struct drx_demod_instance *demod, enum drx_standard standard, bool primary) 9740 { 9741 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9742 struct drxjscu_cmd cmd_scu = { /* command */ 0, 9743 /* parameter_len */ 0, 9744 /* result_len */ 0, 9745 /* *parameter */ NULL, 9746 /* *result */ NULL 9747 }; 9748 int rc; 9749 u16 cmd_result = 0; 9750 9751 /* ATV NTSC */ 9752 9753 /* Stop ATV SCU (will reset ATV and IQM hardware */ 9754 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_ATV | 9755 SCU_RAM_COMMAND_CMD_DEMOD_STOP; 9756 cmd_scu.parameter_len = 0; 9757 cmd_scu.result_len = 1; 9758 cmd_scu.parameter = NULL; 9759 cmd_scu.result = &cmd_result; 9760 rc = scu_command(dev_addr, &cmd_scu); 9761 if (rc != 0) { 9762 pr_err("error %d\n", rc); 9763 goto rw_error; 9764 } 9765 /* Disable ATV outputs (ATV reset enables CVBS, undo this) */ 9766 rc = drxj_dap_write_reg16(dev_addr, ATV_TOP_STDBY__A, (ATV_TOP_STDBY_SIF_STDBY_STANDBY & (~ATV_TOP_STDBY_CVBS_STDBY_A2_ACTIVE)), 0); 9767 if (rc != 0) { 9768 pr_err("error %d\n", rc); 9769 goto rw_error; 9770 } 9771 9772 rc = drxj_dap_write_reg16(dev_addr, ATV_COMM_EXEC__A, ATV_COMM_EXEC_STOP, 0); 9773 if (rc != 0) { 9774 pr_err("error %d\n", rc); 9775 goto rw_error; 9776 } 9777 if (primary) { 9778 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_STOP, 0); 9779 if (rc != 0) { 9780 pr_err("error %d\n", rc); 9781 goto rw_error; 9782 } 9783 rc = set_iqm_af(demod, false); 9784 if (rc != 0) { 9785 pr_err("error %d\n", rc); 9786 goto rw_error; 9787 } 9788 } else { 9789 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 9790 if (rc != 0) { 9791 pr_err("error %d\n", rc); 9792 goto rw_error; 9793 } 9794 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 9795 if (rc != 0) { 9796 pr_err("error %d\n", rc); 9797 goto rw_error; 9798 } 9799 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 9800 if (rc != 0) { 9801 pr_err("error %d\n", rc); 9802 goto rw_error; 9803 } 9804 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 9805 if (rc != 0) { 9806 pr_err("error %d\n", rc); 9807 goto rw_error; 9808 } 9809 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 9810 if (rc != 0) { 9811 pr_err("error %d\n", rc); 9812 goto rw_error; 9813 } 9814 } 9815 rc = power_down_aud(demod); 9816 if (rc != 0) { 9817 pr_err("error %d\n", rc); 9818 goto rw_error; 9819 } 9820 9821 return 0; 9822 rw_error: 9823 return rc; 9824 } 9825 9826 /*============================================================================*/ 9827 9828 /* 9829 * \brief Power up AUD. 9830 * \param demod instance of demodulator 9831 * \return int. 9832 * 9833 */ 9834 static int power_down_aud(struct drx_demod_instance *demod) 9835 { 9836 struct i2c_device_addr *dev_addr = NULL; 9837 struct drxj_data *ext_attr = NULL; 9838 int rc; 9839 9840 dev_addr = (struct i2c_device_addr *)demod->my_i2c_dev_addr; 9841 ext_attr = (struct drxj_data *) demod->my_ext_attr; 9842 9843 rc = drxj_dap_write_reg16(dev_addr, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP, 0); 9844 if (rc != 0) { 9845 pr_err("error %d\n", rc); 9846 goto rw_error; 9847 } 9848 9849 ext_attr->aud_data.audio_is_active = false; 9850 9851 return 0; 9852 rw_error: 9853 return rc; 9854 } 9855 9856 /* 9857 * \fn int set_orx_nsu_aox() 9858 * \brief Configure OrxNsuAox for OOB 9859 * \param demod instance of demodulator. 9860 * \param active 9861 * \return int. 9862 */ 9863 static int set_orx_nsu_aox(struct drx_demod_instance *demod, bool active) 9864 { 9865 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9866 int rc; 9867 u16 data = 0; 9868 9869 /* Configure NSU_AOX */ 9870 rc = drxj_dap_read_reg16(dev_addr, ORX_NSU_AOX_STDBY_W__A, &data, 0); 9871 if (rc != 0) { 9872 pr_err("error %d\n", rc); 9873 goto rw_error; 9874 } 9875 if (!active) 9876 data &= ((~ORX_NSU_AOX_STDBY_W_STDBYADC_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYAMP_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYBIAS_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYPLL_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYPD_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYTAGC_IF_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYTAGC_RF_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYFLT_A2_ON)); 9877 else 9878 data |= (ORX_NSU_AOX_STDBY_W_STDBYADC_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYAMP_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYBIAS_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYPLL_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYPD_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYTAGC_IF_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYTAGC_RF_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYFLT_A2_ON); 9879 rc = drxj_dap_write_reg16(dev_addr, ORX_NSU_AOX_STDBY_W__A, data, 0); 9880 if (rc != 0) { 9881 pr_err("error %d\n", rc); 9882 goto rw_error; 9883 } 9884 9885 return 0; 9886 rw_error: 9887 return rc; 9888 } 9889 9890 /* 9891 * \fn int ctrl_set_oob() 9892 * \brief Set OOB channel to be used. 9893 * \param demod instance of demodulator 9894 * \param oob_param OOB parameters for channel setting. 9895 * \frequency should be in KHz 9896 * \return int. 9897 * 9898 * Accepts only. Returns error otherwise. 9899 * Demapper value is written after scu_command START 9900 * because START command causes COMM_EXEC transition 9901 * from 0 to 1 which causes all registers to be 9902 * overwritten with initial value 9903 * 9904 */ 9905 9906 /* Nyquist filter impulse response */ 9907 #define IMPULSE_COSINE_ALPHA_0_3 {-3, -4, -1, 6, 10, 7, -5, -20, -25, -10, 29, 79, 123, 140} /*sqrt raised-cosine filter with alpha=0.3 */ 9908 #define IMPULSE_COSINE_ALPHA_0_5 { 2, 0, -2, -2, 2, 5, 2, -10, -20, -14, 20, 74, 125, 145} /*sqrt raised-cosine filter with alpha=0.5 */ 9909 #define IMPULSE_COSINE_ALPHA_RO_0_5 { 0, 0, 1, 2, 3, 0, -7, -15, -16, 0, 34, 77, 114, 128} /*full raised-cosine filter with alpha=0.5 (receiver only) */ 9910 9911 /* Coefficients for the nyquist fitler (total: 27 taps) */ 9912 #define NYQFILTERLEN 27 9913 9914 static int ctrl_set_oob(struct drx_demod_instance *demod, struct drxoob *oob_param) 9915 { 9916 int rc; 9917 s32 freq = 0; /* KHz */ 9918 struct i2c_device_addr *dev_addr = NULL; 9919 struct drxj_data *ext_attr = NULL; 9920 u16 i = 0; 9921 bool mirror_freq_spect_oob = false; 9922 u16 trk_filter_value = 0; 9923 struct drxjscu_cmd scu_cmd; 9924 u16 set_param_parameters[3]; 9925 u16 cmd_result[2] = { 0, 0 }; 9926 s16 nyquist_coeffs[4][(NYQFILTERLEN + 1) / 2] = { 9927 IMPULSE_COSINE_ALPHA_0_3, /* Target Mode 0 */ 9928 IMPULSE_COSINE_ALPHA_0_3, /* Target Mode 1 */ 9929 IMPULSE_COSINE_ALPHA_0_5, /* Target Mode 2 */ 9930 IMPULSE_COSINE_ALPHA_RO_0_5 /* Target Mode 3 */ 9931 }; 9932 u8 mode_val[4] = { 2, 2, 0, 1 }; 9933 u8 pfi_coeffs[4][6] = { 9934 {DRXJ_16TO8(-92), DRXJ_16TO8(-108), DRXJ_16TO8(100)}, /* TARGET_MODE = 0: PFI_A = -23/32; PFI_B = -54/32; PFI_C = 25/32; fg = 0.5 MHz (Att=26dB) */ 9935 {DRXJ_16TO8(-64), DRXJ_16TO8(-80), DRXJ_16TO8(80)}, /* TARGET_MODE = 1: PFI_A = -16/32; PFI_B = -40/32; PFI_C = 20/32; fg = 1.0 MHz (Att=28dB) */ 9936 {DRXJ_16TO8(-80), DRXJ_16TO8(-98), DRXJ_16TO8(92)}, /* TARGET_MODE = 2, 3: PFI_A = -20/32; PFI_B = -49/32; PFI_C = 23/32; fg = 0.8 MHz (Att=25dB) */ 9937 {DRXJ_16TO8(-80), DRXJ_16TO8(-98), DRXJ_16TO8(92)} /* TARGET_MODE = 2, 3: PFI_A = -20/32; PFI_B = -49/32; PFI_C = 23/32; fg = 0.8 MHz (Att=25dB) */ 9938 }; 9939 u16 mode_index; 9940 9941 dev_addr = demod->my_i2c_dev_addr; 9942 ext_attr = (struct drxj_data *) demod->my_ext_attr; 9943 mirror_freq_spect_oob = ext_attr->mirror_freq_spect_oob; 9944 9945 /* Check parameters */ 9946 if (oob_param == NULL) { 9947 /* power off oob module */ 9948 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 9949 | SCU_RAM_COMMAND_CMD_DEMOD_STOP; 9950 scu_cmd.parameter_len = 0; 9951 scu_cmd.result_len = 1; 9952 scu_cmd.result = cmd_result; 9953 rc = scu_command(dev_addr, &scu_cmd); 9954 if (rc != 0) { 9955 pr_err("error %d\n", rc); 9956 goto rw_error; 9957 } 9958 rc = set_orx_nsu_aox(demod, false); 9959 if (rc != 0) { 9960 pr_err("error %d\n", rc); 9961 goto rw_error; 9962 } 9963 rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_STOP, 0); 9964 if (rc != 0) { 9965 pr_err("error %d\n", rc); 9966 goto rw_error; 9967 } 9968 9969 ext_attr->oob_power_on = false; 9970 return 0; 9971 } 9972 9973 freq = oob_param->frequency; 9974 if ((freq < 70000) || (freq > 130000)) 9975 return -EIO; 9976 freq = (freq - 50000) / 50; 9977 9978 { 9979 u16 index = 0; 9980 u16 remainder = 0; 9981 u16 *trk_filtercfg = ext_attr->oob_trk_filter_cfg; 9982 9983 index = (u16) ((freq - 400) / 200); 9984 remainder = (u16) ((freq - 400) % 200); 9985 trk_filter_value = 9986 trk_filtercfg[index] - (trk_filtercfg[index] - 9987 trk_filtercfg[index + 9988 1]) / 10 * remainder / 9989 20; 9990 } 9991 9992 /********/ 9993 /* Stop */ 9994 /********/ 9995 rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_STOP, 0); 9996 if (rc != 0) { 9997 pr_err("error %d\n", rc); 9998 goto rw_error; 9999 } 10000 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10001 | SCU_RAM_COMMAND_CMD_DEMOD_STOP; 10002 scu_cmd.parameter_len = 0; 10003 scu_cmd.result_len = 1; 10004 scu_cmd.result = cmd_result; 10005 rc = scu_command(dev_addr, &scu_cmd); 10006 if (rc != 0) { 10007 pr_err("error %d\n", rc); 10008 goto rw_error; 10009 } 10010 /********/ 10011 /* Reset */ 10012 /********/ 10013 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10014 | SCU_RAM_COMMAND_CMD_DEMOD_RESET; 10015 scu_cmd.parameter_len = 0; 10016 scu_cmd.result_len = 1; 10017 scu_cmd.result = cmd_result; 10018 rc = scu_command(dev_addr, &scu_cmd); 10019 if (rc != 0) { 10020 pr_err("error %d\n", rc); 10021 goto rw_error; 10022 } 10023 /**********/ 10024 /* SET_ENV */ 10025 /**********/ 10026 /* set frequency, spectrum inversion and data rate */ 10027 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10028 | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV; 10029 scu_cmd.parameter_len = 3; 10030 /* 1-data rate;2-frequency */ 10031 switch (oob_param->standard) { 10032 case DRX_OOB_MODE_A: 10033 if ( 10034 /* signal is transmitted inverted */ 10035 ((oob_param->spectrum_inverted == true) && 10036 /* and tuner is not mirroring the signal */ 10037 (!mirror_freq_spect_oob)) | 10038 /* or */ 10039 /* signal is transmitted noninverted */ 10040 ((oob_param->spectrum_inverted == false) && 10041 /* and tuner is mirroring the signal */ 10042 (mirror_freq_spect_oob)) 10043 ) 10044 set_param_parameters[0] = 10045 SCU_RAM_ORX_RF_RX_DATA_RATE_2048KBPS_INVSPEC; 10046 else 10047 set_param_parameters[0] = 10048 SCU_RAM_ORX_RF_RX_DATA_RATE_2048KBPS_REGSPEC; 10049 break; 10050 case DRX_OOB_MODE_B_GRADE_A: 10051 if ( 10052 /* signal is transmitted inverted */ 10053 ((oob_param->spectrum_inverted == true) && 10054 /* and tuner is not mirroring the signal */ 10055 (!mirror_freq_spect_oob)) | 10056 /* or */ 10057 /* signal is transmitted noninverted */ 10058 ((oob_param->spectrum_inverted == false) && 10059 /* and tuner is mirroring the signal */ 10060 (mirror_freq_spect_oob)) 10061 ) 10062 set_param_parameters[0] = 10063 SCU_RAM_ORX_RF_RX_DATA_RATE_1544KBPS_INVSPEC; 10064 else 10065 set_param_parameters[0] = 10066 SCU_RAM_ORX_RF_RX_DATA_RATE_1544KBPS_REGSPEC; 10067 break; 10068 case DRX_OOB_MODE_B_GRADE_B: 10069 default: 10070 if ( 10071 /* signal is transmitted inverted */ 10072 ((oob_param->spectrum_inverted == true) && 10073 /* and tuner is not mirroring the signal */ 10074 (!mirror_freq_spect_oob)) | 10075 /* or */ 10076 /* signal is transmitted noninverted */ 10077 ((oob_param->spectrum_inverted == false) && 10078 /* and tuner is mirroring the signal */ 10079 (mirror_freq_spect_oob)) 10080 ) 10081 set_param_parameters[0] = 10082 SCU_RAM_ORX_RF_RX_DATA_RATE_3088KBPS_INVSPEC; 10083 else 10084 set_param_parameters[0] = 10085 SCU_RAM_ORX_RF_RX_DATA_RATE_3088KBPS_REGSPEC; 10086 break; 10087 } 10088 set_param_parameters[1] = (u16) (freq & 0xFFFF); 10089 set_param_parameters[2] = trk_filter_value; 10090 scu_cmd.parameter = set_param_parameters; 10091 scu_cmd.result_len = 1; 10092 scu_cmd.result = cmd_result; 10093 mode_index = mode_val[(set_param_parameters[0] & 0xC0) >> 6]; 10094 rc = scu_command(dev_addr, &scu_cmd); 10095 if (rc != 0) { 10096 pr_err("error %d\n", rc); 10097 goto rw_error; 10098 } 10099 10100 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0); 10101 if (rc != 0) { 10102 pr_err("error %d\n", rc); 10103 goto rw_error; 10104 } /* Write magic word to enable pdr reg write */ 10105 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_OOB_CRX_CFG__A, OOB_CRX_DRIVE_STRENGTH << SIO_PDR_OOB_CRX_CFG_DRIVE__B | 0x03 << SIO_PDR_OOB_CRX_CFG_MODE__B, 0); 10106 if (rc != 0) { 10107 pr_err("error %d\n", rc); 10108 goto rw_error; 10109 } 10110 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_OOB_DRX_CFG__A, OOB_DRX_DRIVE_STRENGTH << SIO_PDR_OOB_DRX_CFG_DRIVE__B | 0x03 << SIO_PDR_OOB_DRX_CFG_MODE__B, 0); 10111 if (rc != 0) { 10112 pr_err("error %d\n", rc); 10113 goto rw_error; 10114 } 10115 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 10116 if (rc != 0) { 10117 pr_err("error %d\n", rc); 10118 goto rw_error; 10119 } /* Write magic word to disable pdr reg write */ 10120 10121 rc = drxj_dap_write_reg16(dev_addr, ORX_TOP_COMM_KEY__A, 0, 0); 10122 if (rc != 0) { 10123 pr_err("error %d\n", rc); 10124 goto rw_error; 10125 } 10126 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_AAG_LEN_W__A, 16000, 0); 10127 if (rc != 0) { 10128 pr_err("error %d\n", rc); 10129 goto rw_error; 10130 } 10131 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_AAG_THR_W__A, 40, 0); 10132 if (rc != 0) { 10133 pr_err("error %d\n", rc); 10134 goto rw_error; 10135 } 10136 10137 /* ddc */ 10138 rc = drxj_dap_write_reg16(dev_addr, ORX_DDC_OFO_SET_W__A, ORX_DDC_OFO_SET_W__PRE, 0); 10139 if (rc != 0) { 10140 pr_err("error %d\n", rc); 10141 goto rw_error; 10142 } 10143 10144 /* nsu */ 10145 rc = drxj_dap_write_reg16(dev_addr, ORX_NSU_AOX_LOPOW_W__A, ext_attr->oob_lo_pow, 0); 10146 if (rc != 0) { 10147 pr_err("error %d\n", rc); 10148 goto rw_error; 10149 } 10150 10151 /* initialization for target mode */ 10152 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TARGET_MODE__A, SCU_RAM_ORX_TARGET_MODE_2048KBPS_SQRT, 0); 10153 if (rc != 0) { 10154 pr_err("error %d\n", rc); 10155 goto rw_error; 10156 } 10157 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FREQ_GAIN_CORR__A, SCU_RAM_ORX_FREQ_GAIN_CORR_2048KBPS, 0); 10158 if (rc != 0) { 10159 pr_err("error %d\n", rc); 10160 goto rw_error; 10161 } 10162 10163 /* Reset bits for timing and freq. recovery */ 10164 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_CPH__A, 0x0001, 0); 10165 if (rc != 0) { 10166 pr_err("error %d\n", rc); 10167 goto rw_error; 10168 } 10169 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_CTI__A, 0x0002, 0); 10170 if (rc != 0) { 10171 pr_err("error %d\n", rc); 10172 goto rw_error; 10173 } 10174 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_KRN__A, 0x0004, 0); 10175 if (rc != 0) { 10176 pr_err("error %d\n", rc); 10177 goto rw_error; 10178 } 10179 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_KRP__A, 0x0008, 0); 10180 if (rc != 0) { 10181 pr_err("error %d\n", rc); 10182 goto rw_error; 10183 } 10184 10185 /* AGN_LOCK = {2048>>3, -2048, 8, -8, 0, 1}; */ 10186 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_LOCK_TH__A, 2048 >> 3, 0); 10187 if (rc != 0) { 10188 pr_err("error %d\n", rc); 10189 goto rw_error; 10190 } 10191 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_LOCK_TOTH__A, (u16)(-2048), 0); 10192 if (rc != 0) { 10193 pr_err("error %d\n", rc); 10194 goto rw_error; 10195 } 10196 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_ONLOCK_TTH__A, 8, 0); 10197 if (rc != 0) { 10198 pr_err("error %d\n", rc); 10199 goto rw_error; 10200 } 10201 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_UNLOCK_TTH__A, (u16)(-8), 0); 10202 if (rc != 0) { 10203 pr_err("error %d\n", rc); 10204 goto rw_error; 10205 } 10206 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_LOCK_MASK__A, 1, 0); 10207 if (rc != 0) { 10208 pr_err("error %d\n", rc); 10209 goto rw_error; 10210 } 10211 10212 /* DGN_LOCK = {10, -2048, 8, -8, 0, 1<<1}; */ 10213 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_LOCK_TH__A, 10, 0); 10214 if (rc != 0) { 10215 pr_err("error %d\n", rc); 10216 goto rw_error; 10217 } 10218 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_LOCK_TOTH__A, (u16)(-2048), 0); 10219 if (rc != 0) { 10220 pr_err("error %d\n", rc); 10221 goto rw_error; 10222 } 10223 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_ONLOCK_TTH__A, 8, 0); 10224 if (rc != 0) { 10225 pr_err("error %d\n", rc); 10226 goto rw_error; 10227 } 10228 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_UNLOCK_TTH__A, (u16)(-8), 0); 10229 if (rc != 0) { 10230 pr_err("error %d\n", rc); 10231 goto rw_error; 10232 } 10233 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_LOCK_MASK__A, 1 << 1, 0); 10234 if (rc != 0) { 10235 pr_err("error %d\n", rc); 10236 goto rw_error; 10237 } 10238 10239 /* FRQ_LOCK = {15,-2048, 8, -8, 0, 1<<2}; */ 10240 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_LOCK_TH__A, 17, 0); 10241 if (rc != 0) { 10242 pr_err("error %d\n", rc); 10243 goto rw_error; 10244 } 10245 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_LOCK_TOTH__A, (u16)(-2048), 0); 10246 if (rc != 0) { 10247 pr_err("error %d\n", rc); 10248 goto rw_error; 10249 } 10250 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_ONLOCK_TTH__A, 8, 0); 10251 if (rc != 0) { 10252 pr_err("error %d\n", rc); 10253 goto rw_error; 10254 } 10255 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_UNLOCK_TTH__A, (u16)(-8), 0); 10256 if (rc != 0) { 10257 pr_err("error %d\n", rc); 10258 goto rw_error; 10259 } 10260 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_LOCK_MASK__A, 1 << 2, 0); 10261 if (rc != 0) { 10262 pr_err("error %d\n", rc); 10263 goto rw_error; 10264 } 10265 10266 /* PHA_LOCK = {5000, -2048, 8, -8, 0, 1<<3}; */ 10267 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_LOCK_TH__A, 3000, 0); 10268 if (rc != 0) { 10269 pr_err("error %d\n", rc); 10270 goto rw_error; 10271 } 10272 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_LOCK_TOTH__A, (u16)(-2048), 0); 10273 if (rc != 0) { 10274 pr_err("error %d\n", rc); 10275 goto rw_error; 10276 } 10277 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_ONLOCK_TTH__A, 8, 0); 10278 if (rc != 0) { 10279 pr_err("error %d\n", rc); 10280 goto rw_error; 10281 } 10282 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_UNLOCK_TTH__A, (u16)(-8), 0); 10283 if (rc != 0) { 10284 pr_err("error %d\n", rc); 10285 goto rw_error; 10286 } 10287 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_LOCK_MASK__A, 1 << 3, 0); 10288 if (rc != 0) { 10289 pr_err("error %d\n", rc); 10290 goto rw_error; 10291 } 10292 10293 /* TIM_LOCK = {300, -2048, 8, -8, 0, 1<<4}; */ 10294 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_LOCK_TH__A, 400, 0); 10295 if (rc != 0) { 10296 pr_err("error %d\n", rc); 10297 goto rw_error; 10298 } 10299 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_LOCK_TOTH__A, (u16)(-2048), 0); 10300 if (rc != 0) { 10301 pr_err("error %d\n", rc); 10302 goto rw_error; 10303 } 10304 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_ONLOCK_TTH__A, 8, 0); 10305 if (rc != 0) { 10306 pr_err("error %d\n", rc); 10307 goto rw_error; 10308 } 10309 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_UNLOCK_TTH__A, (u16)(-8), 0); 10310 if (rc != 0) { 10311 pr_err("error %d\n", rc); 10312 goto rw_error; 10313 } 10314 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_LOCK_MASK__A, 1 << 4, 0); 10315 if (rc != 0) { 10316 pr_err("error %d\n", rc); 10317 goto rw_error; 10318 } 10319 10320 /* EQU_LOCK = {20, -2048, 8, -8, 0, 1<<5}; */ 10321 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_LOCK_TH__A, 20, 0); 10322 if (rc != 0) { 10323 pr_err("error %d\n", rc); 10324 goto rw_error; 10325 } 10326 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_LOCK_TOTH__A, (u16)(-2048), 0); 10327 if (rc != 0) { 10328 pr_err("error %d\n", rc); 10329 goto rw_error; 10330 } 10331 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_ONLOCK_TTH__A, 4, 0); 10332 if (rc != 0) { 10333 pr_err("error %d\n", rc); 10334 goto rw_error; 10335 } 10336 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_UNLOCK_TTH__A, (u16)(-4), 0); 10337 if (rc != 0) { 10338 pr_err("error %d\n", rc); 10339 goto rw_error; 10340 } 10341 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_LOCK_MASK__A, 1 << 5, 0); 10342 if (rc != 0) { 10343 pr_err("error %d\n", rc); 10344 goto rw_error; 10345 } 10346 10347 /* PRE-Filter coefficients (PFI) */ 10348 rc = drxdap_fasi_write_block(dev_addr, ORX_FWP_PFI_A_W__A, sizeof(pfi_coeffs[mode_index]), ((u8 *)pfi_coeffs[mode_index]), 0); 10349 if (rc != 0) { 10350 pr_err("error %d\n", rc); 10351 goto rw_error; 10352 } 10353 rc = drxj_dap_write_reg16(dev_addr, ORX_TOP_MDE_W__A, mode_index, 0); 10354 if (rc != 0) { 10355 pr_err("error %d\n", rc); 10356 goto rw_error; 10357 } 10358 10359 /* NYQUIST-Filter coefficients (NYQ) */ 10360 for (i = 0; i < (NYQFILTERLEN + 1) / 2; i++) { 10361 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_NYQ_ADR_W__A, i, 0); 10362 if (rc != 0) { 10363 pr_err("error %d\n", rc); 10364 goto rw_error; 10365 } 10366 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_NYQ_COF_RW__A, nyquist_coeffs[mode_index][i], 0); 10367 if (rc != 0) { 10368 pr_err("error %d\n", rc); 10369 goto rw_error; 10370 } 10371 } 10372 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_NYQ_ADR_W__A, 31, 0); 10373 if (rc != 0) { 10374 pr_err("error %d\n", rc); 10375 goto rw_error; 10376 } 10377 rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_ACTIVE, 0); 10378 if (rc != 0) { 10379 pr_err("error %d\n", rc); 10380 goto rw_error; 10381 } 10382 /********/ 10383 /* Start */ 10384 /********/ 10385 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10386 | SCU_RAM_COMMAND_CMD_DEMOD_START; 10387 scu_cmd.parameter_len = 0; 10388 scu_cmd.result_len = 1; 10389 scu_cmd.result = cmd_result; 10390 rc = scu_command(dev_addr, &scu_cmd); 10391 if (rc != 0) { 10392 pr_err("error %d\n", rc); 10393 goto rw_error; 10394 } 10395 10396 rc = set_orx_nsu_aox(demod, true); 10397 if (rc != 0) { 10398 pr_err("error %d\n", rc); 10399 goto rw_error; 10400 } 10401 rc = drxj_dap_write_reg16(dev_addr, ORX_NSU_AOX_STHR_W__A, ext_attr->oob_pre_saw, 0); 10402 if (rc != 0) { 10403 pr_err("error %d\n", rc); 10404 goto rw_error; 10405 } 10406 10407 ext_attr->oob_power_on = true; 10408 10409 return 0; 10410 rw_error: 10411 return rc; 10412 } 10413 10414 /*============================================================================*/ 10415 /*== END OOB DATAPATH FUNCTIONS ==*/ 10416 /*============================================================================*/ 10417 10418 /*============================================================================= 10419 ===== MC command related functions ========================================== 10420 ===========================================================================*/ 10421 10422 /*============================================================================= 10423 ===== ctrl_set_channel() ========================================================== 10424 ===========================================================================*/ 10425 /* 10426 * \fn int ctrl_set_channel() 10427 * \brief Select a new transmission channel. 10428 * \param demod instance of demod. 10429 * \param channel Pointer to channel data. 10430 * \return int. 10431 * 10432 * In case the tuner module is not used and in case of NTSC/FM the pogrammer 10433 * must tune the tuner to the centre frequency of the NTSC/FM channel. 10434 * 10435 */ 10436 static int 10437 ctrl_set_channel(struct drx_demod_instance *demod, struct drx_channel *channel) 10438 { 10439 int rc; 10440 s32 tuner_freq_offset = 0; 10441 struct drxj_data *ext_attr = NULL; 10442 struct i2c_device_addr *dev_addr = NULL; 10443 enum drx_standard standard = DRX_STANDARD_UNKNOWN; 10444 #ifndef DRXJ_VSB_ONLY 10445 u32 min_symbol_rate = 0; 10446 u32 max_symbol_rate = 0; 10447 int bandwidth_temp = 0; 10448 int bandwidth = 0; 10449 #endif 10450 /*== check arguments ======================================================*/ 10451 if ((demod == NULL) || (channel == NULL)) 10452 return -EINVAL; 10453 10454 dev_addr = demod->my_i2c_dev_addr; 10455 ext_attr = (struct drxj_data *) demod->my_ext_attr; 10456 standard = ext_attr->standard; 10457 10458 /* check valid standards */ 10459 switch (standard) { 10460 case DRX_STANDARD_8VSB: 10461 #ifndef DRXJ_VSB_ONLY 10462 case DRX_STANDARD_ITU_A: 10463 case DRX_STANDARD_ITU_B: 10464 case DRX_STANDARD_ITU_C: 10465 #endif /* DRXJ_VSB_ONLY */ 10466 break; 10467 case DRX_STANDARD_UNKNOWN: 10468 default: 10469 return -EINVAL; 10470 } 10471 10472 /* check bandwidth QAM annex B, NTSC and 8VSB */ 10473 if ((standard == DRX_STANDARD_ITU_B) || 10474 (standard == DRX_STANDARD_8VSB) || 10475 (standard == DRX_STANDARD_NTSC)) { 10476 switch (channel->bandwidth) { 10477 case DRX_BANDWIDTH_6MHZ: 10478 case DRX_BANDWIDTH_UNKNOWN: /* fall through */ 10479 channel->bandwidth = DRX_BANDWIDTH_6MHZ; 10480 break; 10481 case DRX_BANDWIDTH_8MHZ: /* fall through */ 10482 case DRX_BANDWIDTH_7MHZ: /* fall through */ 10483 default: 10484 return -EINVAL; 10485 } 10486 } 10487 10488 /* For QAM annex A and annex C: 10489 -check symbolrate and constellation 10490 -derive bandwidth from symbolrate (input bandwidth is ignored) 10491 */ 10492 #ifndef DRXJ_VSB_ONLY 10493 if ((standard == DRX_STANDARD_ITU_A) || 10494 (standard == DRX_STANDARD_ITU_C)) { 10495 struct drxuio_cfg uio_cfg = { DRX_UIO1, DRX_UIO_MODE_FIRMWARE_SAW }; 10496 int bw_rolloff_factor = 0; 10497 10498 bw_rolloff_factor = (standard == DRX_STANDARD_ITU_A) ? 115 : 113; 10499 min_symbol_rate = DRXJ_QAM_SYMBOLRATE_MIN; 10500 max_symbol_rate = DRXJ_QAM_SYMBOLRATE_MAX; 10501 /* config SMA_TX pin to SAW switch mode */ 10502 rc = ctrl_set_uio_cfg(demod, &uio_cfg); 10503 if (rc != 0) { 10504 pr_err("error %d\n", rc); 10505 goto rw_error; 10506 } 10507 10508 if (channel->symbolrate < min_symbol_rate || 10509 channel->symbolrate > max_symbol_rate) { 10510 return -EINVAL; 10511 } 10512 10513 switch (channel->constellation) { 10514 case DRX_CONSTELLATION_QAM16: /* fall through */ 10515 case DRX_CONSTELLATION_QAM32: /* fall through */ 10516 case DRX_CONSTELLATION_QAM64: /* fall through */ 10517 case DRX_CONSTELLATION_QAM128: /* fall through */ 10518 case DRX_CONSTELLATION_QAM256: 10519 bandwidth_temp = channel->symbolrate * bw_rolloff_factor; 10520 bandwidth = bandwidth_temp / 100; 10521 10522 if ((bandwidth_temp % 100) >= 50) 10523 bandwidth++; 10524 10525 if (bandwidth <= 6100000) { 10526 channel->bandwidth = DRX_BANDWIDTH_6MHZ; 10527 } else if ((bandwidth > 6100000) 10528 && (bandwidth <= 7100000)) { 10529 channel->bandwidth = DRX_BANDWIDTH_7MHZ; 10530 } else if (bandwidth > 7100000) { 10531 channel->bandwidth = DRX_BANDWIDTH_8MHZ; 10532 } 10533 break; 10534 default: 10535 return -EINVAL; 10536 } 10537 } 10538 10539 /* For QAM annex B: 10540 -check constellation 10541 */ 10542 if (standard == DRX_STANDARD_ITU_B) { 10543 switch (channel->constellation) { 10544 case DRX_CONSTELLATION_AUTO: 10545 case DRX_CONSTELLATION_QAM256: 10546 case DRX_CONSTELLATION_QAM64: 10547 break; 10548 default: 10549 return -EINVAL; 10550 } 10551 10552 switch (channel->interleavemode) { 10553 case DRX_INTERLEAVEMODE_I128_J1: 10554 case DRX_INTERLEAVEMODE_I128_J1_V2: 10555 case DRX_INTERLEAVEMODE_I128_J2: 10556 case DRX_INTERLEAVEMODE_I64_J2: 10557 case DRX_INTERLEAVEMODE_I128_J3: 10558 case DRX_INTERLEAVEMODE_I32_J4: 10559 case DRX_INTERLEAVEMODE_I128_J4: 10560 case DRX_INTERLEAVEMODE_I16_J8: 10561 case DRX_INTERLEAVEMODE_I128_J5: 10562 case DRX_INTERLEAVEMODE_I8_J16: 10563 case DRX_INTERLEAVEMODE_I128_J6: 10564 case DRX_INTERLEAVEMODE_I128_J7: 10565 case DRX_INTERLEAVEMODE_I128_J8: 10566 case DRX_INTERLEAVEMODE_I12_J17: 10567 case DRX_INTERLEAVEMODE_I5_J4: 10568 case DRX_INTERLEAVEMODE_B52_M240: 10569 case DRX_INTERLEAVEMODE_B52_M720: 10570 case DRX_INTERLEAVEMODE_UNKNOWN: 10571 case DRX_INTERLEAVEMODE_AUTO: 10572 break; 10573 default: 10574 return -EINVAL; 10575 } 10576 } 10577 10578 if ((ext_attr->uio_sma_tx_mode) == DRX_UIO_MODE_FIRMWARE_SAW) { 10579 /* SAW SW, user UIO is used for switchable SAW */ 10580 struct drxuio_data uio1 = { DRX_UIO1, false }; 10581 10582 switch (channel->bandwidth) { 10583 case DRX_BANDWIDTH_8MHZ: 10584 uio1.value = true; 10585 break; 10586 case DRX_BANDWIDTH_7MHZ: 10587 uio1.value = false; 10588 break; 10589 case DRX_BANDWIDTH_6MHZ: 10590 uio1.value = false; 10591 break; 10592 case DRX_BANDWIDTH_UNKNOWN: 10593 default: 10594 return -EINVAL; 10595 } 10596 10597 rc = ctrl_uio_write(demod, &uio1); 10598 if (rc != 0) { 10599 pr_err("error %d\n", rc); 10600 goto rw_error; 10601 } 10602 } 10603 #endif /* DRXJ_VSB_ONLY */ 10604 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE, 0); 10605 if (rc != 0) { 10606 pr_err("error %d\n", rc); 10607 goto rw_error; 10608 } 10609 10610 tuner_freq_offset = 0; 10611 10612 /*== Setup demod for specific standard ====================================*/ 10613 switch (standard) { 10614 case DRX_STANDARD_8VSB: 10615 if (channel->mirror == DRX_MIRROR_AUTO) 10616 ext_attr->mirror = DRX_MIRROR_NO; 10617 else 10618 ext_attr->mirror = channel->mirror; 10619 rc = set_vsb(demod); 10620 if (rc != 0) { 10621 pr_err("error %d\n", rc); 10622 goto rw_error; 10623 } 10624 rc = set_frequency(demod, channel, tuner_freq_offset); 10625 if (rc != 0) { 10626 pr_err("error %d\n", rc); 10627 goto rw_error; 10628 } 10629 break; 10630 #ifndef DRXJ_VSB_ONLY 10631 case DRX_STANDARD_ITU_A: /* fallthrough */ 10632 case DRX_STANDARD_ITU_B: /* fallthrough */ 10633 case DRX_STANDARD_ITU_C: 10634 rc = set_qam_channel(demod, channel, tuner_freq_offset); 10635 if (rc != 0) { 10636 pr_err("error %d\n", rc); 10637 goto rw_error; 10638 } 10639 break; 10640 #endif 10641 case DRX_STANDARD_UNKNOWN: 10642 default: 10643 return -EIO; 10644 } 10645 10646 /* flag the packet error counter reset */ 10647 ext_attr->reset_pkt_err_acc = true; 10648 10649 return 0; 10650 rw_error: 10651 return rc; 10652 } 10653 10654 /*============================================================================= 10655 ===== SigQuality() ========================================================== 10656 ===========================================================================*/ 10657 10658 /* 10659 * \fn int ctrl_sig_quality() 10660 * \brief Retrieve signal quality form device. 10661 * \param devmod Pointer to demodulator instance. 10662 * \param sig_quality Pointer to signal quality data. 10663 * \return int. 10664 * \retval 0 sig_quality contains valid data. 10665 * \retval -EINVAL sig_quality is NULL. 10666 * \retval -EIO Erroneous data, sig_quality contains invalid data. 10667 10668 */ 10669 static int 10670 ctrl_sig_quality(struct drx_demod_instance *demod, 10671 enum drx_lock_status lock_status) 10672 { 10673 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 10674 struct drxj_data *ext_attr = demod->my_ext_attr; 10675 struct drx39xxj_state *state = dev_addr->user_data; 10676 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 10677 enum drx_standard standard = ext_attr->standard; 10678 int rc; 10679 u32 ber, cnt, err, pkt; 10680 u16 mer, strength = 0; 10681 10682 rc = get_sig_strength(demod, &strength); 10683 if (rc < 0) { 10684 pr_err("error getting signal strength %d\n", rc); 10685 p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10686 } else { 10687 p->strength.stat[0].scale = FE_SCALE_RELATIVE; 10688 p->strength.stat[0].uvalue = 65535UL * strength/ 100; 10689 } 10690 10691 switch (standard) { 10692 case DRX_STANDARD_8VSB: 10693 #ifdef DRXJ_SIGNAL_ACCUM_ERR 10694 rc = get_acc_pkt_err(demod, &pkt); 10695 if (rc != 0) { 10696 pr_err("error %d\n", rc); 10697 goto rw_error; 10698 } 10699 #endif 10700 if (lock_status != DRXJ_DEMOD_LOCK && lock_status != DRX_LOCKED) { 10701 p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10702 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10703 p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10704 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10705 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10706 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10707 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10708 } else { 10709 rc = get_vsb_post_rs_pck_err(dev_addr, &err, &pkt); 10710 if (rc != 0) { 10711 pr_err("error %d getting UCB\n", rc); 10712 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10713 } else { 10714 p->block_error.stat[0].scale = FE_SCALE_COUNTER; 10715 p->block_error.stat[0].uvalue += err; 10716 p->block_count.stat[0].scale = FE_SCALE_COUNTER; 10717 p->block_count.stat[0].uvalue += pkt; 10718 } 10719 10720 /* PostViterbi is compute in steps of 10^(-6) */ 10721 rc = get_vs_bpre_viterbi_ber(dev_addr, &ber, &cnt); 10722 if (rc != 0) { 10723 pr_err("error %d getting pre-ber\n", rc); 10724 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10725 } else { 10726 p->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; 10727 p->pre_bit_error.stat[0].uvalue += ber; 10728 p->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; 10729 p->pre_bit_count.stat[0].uvalue += cnt; 10730 } 10731 10732 rc = get_vs_bpost_viterbi_ber(dev_addr, &ber, &cnt); 10733 if (rc != 0) { 10734 pr_err("error %d getting post-ber\n", rc); 10735 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10736 } else { 10737 p->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; 10738 p->post_bit_error.stat[0].uvalue += ber; 10739 p->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; 10740 p->post_bit_count.stat[0].uvalue += cnt; 10741 } 10742 rc = get_vsbmer(dev_addr, &mer); 10743 if (rc != 0) { 10744 pr_err("error %d getting MER\n", rc); 10745 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10746 } else { 10747 p->cnr.stat[0].svalue = mer * 100; 10748 p->cnr.stat[0].scale = FE_SCALE_DECIBEL; 10749 } 10750 } 10751 break; 10752 #ifndef DRXJ_VSB_ONLY 10753 case DRX_STANDARD_ITU_A: 10754 case DRX_STANDARD_ITU_B: 10755 case DRX_STANDARD_ITU_C: 10756 rc = ctrl_get_qam_sig_quality(demod); 10757 if (rc != 0) { 10758 pr_err("error %d\n", rc); 10759 goto rw_error; 10760 } 10761 break; 10762 #endif 10763 default: 10764 return -EIO; 10765 } 10766 10767 return 0; 10768 rw_error: 10769 return rc; 10770 } 10771 10772 /*============================================================================*/ 10773 10774 /* 10775 * \fn int ctrl_lock_status() 10776 * \brief Retrieve lock status . 10777 * \param dev_addr Pointer to demodulator device address. 10778 * \param lock_stat Pointer to lock status structure. 10779 * \return int. 10780 * 10781 */ 10782 static int 10783 ctrl_lock_status(struct drx_demod_instance *demod, enum drx_lock_status *lock_stat) 10784 { 10785 enum drx_standard standard = DRX_STANDARD_UNKNOWN; 10786 struct drxj_data *ext_attr = NULL; 10787 struct i2c_device_addr *dev_addr = NULL; 10788 struct drxjscu_cmd cmd_scu = { /* command */ 0, 10789 /* parameter_len */ 0, 10790 /* result_len */ 0, 10791 /* *parameter */ NULL, 10792 /* *result */ NULL 10793 }; 10794 int rc; 10795 u16 cmd_result[2] = { 0, 0 }; 10796 u16 demod_lock = SCU_RAM_PARAM_1_RES_DEMOD_GET_LOCK_DEMOD_LOCKED; 10797 10798 /* check arguments */ 10799 if ((demod == NULL) || (lock_stat == NULL)) 10800 return -EINVAL; 10801 10802 dev_addr = demod->my_i2c_dev_addr; 10803 ext_attr = (struct drxj_data *) demod->my_ext_attr; 10804 standard = ext_attr->standard; 10805 10806 *lock_stat = DRX_NOT_LOCKED; 10807 10808 /* define the SCU command code */ 10809 switch (standard) { 10810 case DRX_STANDARD_8VSB: 10811 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB | 10812 SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK; 10813 demod_lock |= 0x6; 10814 break; 10815 #ifndef DRXJ_VSB_ONLY 10816 case DRX_STANDARD_ITU_A: 10817 case DRX_STANDARD_ITU_B: 10818 case DRX_STANDARD_ITU_C: 10819 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 10820 SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK; 10821 break; 10822 #endif 10823 case DRX_STANDARD_UNKNOWN: /* fallthrough */ 10824 default: 10825 return -EIO; 10826 } 10827 10828 /* define the SCU command parameters and execute the command */ 10829 cmd_scu.parameter_len = 0; 10830 cmd_scu.result_len = 2; 10831 cmd_scu.parameter = NULL; 10832 cmd_scu.result = cmd_result; 10833 rc = scu_command(dev_addr, &cmd_scu); 10834 if (rc != 0) { 10835 pr_err("error %d\n", rc); 10836 goto rw_error; 10837 } 10838 10839 /* set the lock status */ 10840 if (cmd_scu.result[1] < demod_lock) { 10841 /* 0x0000 NOT LOCKED */ 10842 *lock_stat = DRX_NOT_LOCKED; 10843 } else if (cmd_scu.result[1] < SCU_RAM_PARAM_1_RES_DEMOD_GET_LOCK_LOCKED) { 10844 *lock_stat = DRXJ_DEMOD_LOCK; 10845 } else if (cmd_scu.result[1] < 10846 SCU_RAM_PARAM_1_RES_DEMOD_GET_LOCK_NEVER_LOCK) { 10847 /* 0x8000 DEMOD + FEC LOCKED (system lock) */ 10848 *lock_stat = DRX_LOCKED; 10849 } else { 10850 /* 0xC000 NEVER LOCKED */ 10851 /* (system will never be able to lock to the signal) */ 10852 *lock_stat = DRX_NEVER_LOCK; 10853 } 10854 10855 return 0; 10856 rw_error: 10857 return rc; 10858 } 10859 10860 /*============================================================================*/ 10861 10862 /* 10863 * \fn int ctrl_set_standard() 10864 * \brief Set modulation standard to be used. 10865 * \param standard Modulation standard. 10866 * \return int. 10867 * 10868 * Setup stuff for the desired demodulation standard. 10869 * Disable and power down the previous selected demodulation standard 10870 * 10871 */ 10872 static int 10873 ctrl_set_standard(struct drx_demod_instance *demod, enum drx_standard *standard) 10874 { 10875 struct drxj_data *ext_attr = NULL; 10876 int rc; 10877 enum drx_standard prev_standard; 10878 10879 /* check arguments */ 10880 if ((standard == NULL) || (demod == NULL)) 10881 return -EINVAL; 10882 10883 ext_attr = (struct drxj_data *) demod->my_ext_attr; 10884 prev_standard = ext_attr->standard; 10885 10886 /* 10887 Stop and power down previous standard 10888 */ 10889 switch (prev_standard) { 10890 #ifndef DRXJ_VSB_ONLY 10891 case DRX_STANDARD_ITU_A: /* fallthrough */ 10892 case DRX_STANDARD_ITU_B: /* fallthrough */ 10893 case DRX_STANDARD_ITU_C: 10894 rc = power_down_qam(demod, false); 10895 if (rc != 0) { 10896 pr_err("error %d\n", rc); 10897 goto rw_error; 10898 } 10899 break; 10900 #endif 10901 case DRX_STANDARD_8VSB: 10902 rc = power_down_vsb(demod, false); 10903 if (rc != 0) { 10904 pr_err("error %d\n", rc); 10905 goto rw_error; 10906 } 10907 break; 10908 case DRX_STANDARD_UNKNOWN: 10909 /* Do nothing */ 10910 break; 10911 case DRX_STANDARD_AUTO: /* fallthrough */ 10912 default: 10913 return -EINVAL; 10914 } 10915 10916 /* 10917 Initialize channel independent registers 10918 Power up new standard 10919 */ 10920 ext_attr->standard = *standard; 10921 10922 switch (*standard) { 10923 #ifndef DRXJ_VSB_ONLY 10924 case DRX_STANDARD_ITU_A: /* fallthrough */ 10925 case DRX_STANDARD_ITU_B: /* fallthrough */ 10926 case DRX_STANDARD_ITU_C: 10927 do { 10928 u16 dummy; 10929 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SCU_RAM_VERSION_HI__A, &dummy, 0); 10930 if (rc != 0) { 10931 pr_err("error %d\n", rc); 10932 goto rw_error; 10933 } 10934 } while (0); 10935 break; 10936 #endif 10937 case DRX_STANDARD_8VSB: 10938 rc = set_vsb_leak_n_gain(demod); 10939 if (rc != 0) { 10940 pr_err("error %d\n", rc); 10941 goto rw_error; 10942 } 10943 break; 10944 default: 10945 ext_attr->standard = DRX_STANDARD_UNKNOWN; 10946 return -EINVAL; 10947 break; 10948 } 10949 10950 return 0; 10951 rw_error: 10952 /* Don't know what the standard is now ... try again */ 10953 ext_attr->standard = DRX_STANDARD_UNKNOWN; 10954 return rc; 10955 } 10956 10957 /*============================================================================*/ 10958 10959 static void drxj_reset_mode(struct drxj_data *ext_attr) 10960 { 10961 /* Initialize default AFE configuration for QAM */ 10962 if (ext_attr->has_lna) { 10963 /* IF AGC off, PGA active */ 10964 #ifndef DRXJ_VSB_ONLY 10965 ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; 10966 ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; 10967 ext_attr->qam_pga_cfg = 140 + (11 * 13); 10968 #endif 10969 ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; 10970 ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; 10971 ext_attr->vsb_pga_cfg = 140 + (11 * 13); 10972 } else { 10973 /* IF AGC on, PGA not active */ 10974 #ifndef DRXJ_VSB_ONLY 10975 ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; 10976 ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 10977 ext_attr->qam_if_agc_cfg.min_output_level = 0; 10978 ext_attr->qam_if_agc_cfg.max_output_level = 0x7FFF; 10979 ext_attr->qam_if_agc_cfg.speed = 3; 10980 ext_attr->qam_if_agc_cfg.top = 1297; 10981 ext_attr->qam_pga_cfg = 140; 10982 #endif 10983 ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; 10984 ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 10985 ext_attr->vsb_if_agc_cfg.min_output_level = 0; 10986 ext_attr->vsb_if_agc_cfg.max_output_level = 0x7FFF; 10987 ext_attr->vsb_if_agc_cfg.speed = 3; 10988 ext_attr->vsb_if_agc_cfg.top = 1024; 10989 ext_attr->vsb_pga_cfg = 140; 10990 } 10991 /* TODO: remove min_output_level and max_output_level for both QAM and VSB after */ 10992 /* mc has not used them */ 10993 #ifndef DRXJ_VSB_ONLY 10994 ext_attr->qam_rf_agc_cfg.standard = DRX_STANDARD_ITU_B; 10995 ext_attr->qam_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 10996 ext_attr->qam_rf_agc_cfg.min_output_level = 0; 10997 ext_attr->qam_rf_agc_cfg.max_output_level = 0x7FFF; 10998 ext_attr->qam_rf_agc_cfg.speed = 3; 10999 ext_attr->qam_rf_agc_cfg.top = 9500; 11000 ext_attr->qam_rf_agc_cfg.cut_off_current = 4000; 11001 ext_attr->qam_pre_saw_cfg.standard = DRX_STANDARD_ITU_B; 11002 ext_attr->qam_pre_saw_cfg.reference = 0x07; 11003 ext_attr->qam_pre_saw_cfg.use_pre_saw = true; 11004 #endif 11005 /* Initialize default AFE configuration for VSB */ 11006 ext_attr->vsb_rf_agc_cfg.standard = DRX_STANDARD_8VSB; 11007 ext_attr->vsb_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 11008 ext_attr->vsb_rf_agc_cfg.min_output_level = 0; 11009 ext_attr->vsb_rf_agc_cfg.max_output_level = 0x7FFF; 11010 ext_attr->vsb_rf_agc_cfg.speed = 3; 11011 ext_attr->vsb_rf_agc_cfg.top = 9500; 11012 ext_attr->vsb_rf_agc_cfg.cut_off_current = 4000; 11013 ext_attr->vsb_pre_saw_cfg.standard = DRX_STANDARD_8VSB; 11014 ext_attr->vsb_pre_saw_cfg.reference = 0x07; 11015 ext_attr->vsb_pre_saw_cfg.use_pre_saw = true; 11016 } 11017 11018 /* 11019 * \fn int ctrl_power_mode() 11020 * \brief Set the power mode of the device to the specified power mode 11021 * \param demod Pointer to demodulator instance. 11022 * \param mode Pointer to new power mode. 11023 * \return int. 11024 * \retval 0 Success 11025 * \retval -EIO I2C error or other failure 11026 * \retval -EINVAL Invalid mode argument. 11027 * 11028 * 11029 */ 11030 static int 11031 ctrl_power_mode(struct drx_demod_instance *demod, enum drx_power_mode *mode) 11032 { 11033 struct drx_common_attr *common_attr = (struct drx_common_attr *) NULL; 11034 struct drxj_data *ext_attr = (struct drxj_data *) NULL; 11035 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)NULL; 11036 int rc; 11037 u16 sio_cc_pwd_mode = 0; 11038 11039 common_attr = (struct drx_common_attr *) demod->my_common_attr; 11040 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11041 dev_addr = demod->my_i2c_dev_addr; 11042 11043 /* Check arguments */ 11044 if (mode == NULL) 11045 return -EINVAL; 11046 11047 /* If already in requested power mode, do nothing */ 11048 if (common_attr->current_power_mode == *mode) 11049 return 0; 11050 11051 switch (*mode) { 11052 case DRX_POWER_UP: 11053 case DRXJ_POWER_DOWN_MAIN_PATH: 11054 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_NONE; 11055 break; 11056 case DRXJ_POWER_DOWN_CORE: 11057 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_CLOCK; 11058 break; 11059 case DRXJ_POWER_DOWN_PLL: 11060 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_PLL; 11061 break; 11062 case DRX_POWER_DOWN: 11063 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OSC; 11064 break; 11065 default: 11066 /* Unknow sleep mode */ 11067 return -EINVAL; 11068 break; 11069 } 11070 11071 /* Check if device needs to be powered up */ 11072 if ((common_attr->current_power_mode != DRX_POWER_UP)) { 11073 rc = power_up_device(demod); 11074 if (rc != 0) { 11075 pr_err("error %d\n", rc); 11076 goto rw_error; 11077 } 11078 } 11079 11080 if (*mode == DRX_POWER_UP) { 11081 /* Restore analog & pin configuration */ 11082 11083 /* Initialize default AFE configuration for VSB */ 11084 drxj_reset_mode(ext_attr); 11085 } else { 11086 /* Power down to requested mode */ 11087 /* Backup some register settings */ 11088 /* Set pins with possible pull-ups connected to them in input mode */ 11089 /* Analog power down */ 11090 /* ADC power down */ 11091 /* Power down device */ 11092 /* stop all comm_exec */ 11093 /* 11094 Stop and power down previous standard 11095 */ 11096 11097 switch (ext_attr->standard) { 11098 case DRX_STANDARD_ITU_A: 11099 case DRX_STANDARD_ITU_B: 11100 case DRX_STANDARD_ITU_C: 11101 rc = power_down_qam(demod, true); 11102 if (rc != 0) { 11103 pr_err("error %d\n", rc); 11104 goto rw_error; 11105 } 11106 break; 11107 case DRX_STANDARD_8VSB: 11108 rc = power_down_vsb(demod, true); 11109 if (rc != 0) { 11110 pr_err("error %d\n", rc); 11111 goto rw_error; 11112 } 11113 break; 11114 case DRX_STANDARD_PAL_SECAM_BG: /* fallthrough */ 11115 case DRX_STANDARD_PAL_SECAM_DK: /* fallthrough */ 11116 case DRX_STANDARD_PAL_SECAM_I: /* fallthrough */ 11117 case DRX_STANDARD_PAL_SECAM_L: /* fallthrough */ 11118 case DRX_STANDARD_PAL_SECAM_LP: /* fallthrough */ 11119 case DRX_STANDARD_NTSC: /* fallthrough */ 11120 case DRX_STANDARD_FM: 11121 rc = power_down_atv(demod, ext_attr->standard, true); 11122 if (rc != 0) { 11123 pr_err("error %d\n", rc); 11124 goto rw_error; 11125 } 11126 break; 11127 case DRX_STANDARD_UNKNOWN: 11128 /* Do nothing */ 11129 break; 11130 case DRX_STANDARD_AUTO: /* fallthrough */ 11131 default: 11132 return -EIO; 11133 } 11134 ext_attr->standard = DRX_STANDARD_UNKNOWN; 11135 } 11136 11137 if (*mode != DRXJ_POWER_DOWN_MAIN_PATH) { 11138 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_PWD_MODE__A, sio_cc_pwd_mode, 0); 11139 if (rc != 0) { 11140 pr_err("error %d\n", rc); 11141 goto rw_error; 11142 } 11143 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY, 0); 11144 if (rc != 0) { 11145 pr_err("error %d\n", rc); 11146 goto rw_error; 11147 } 11148 11149 if ((*mode != DRX_POWER_UP)) { 11150 /* Initialize HI, wakeup key especially before put IC to sleep */ 11151 rc = init_hi(demod); 11152 if (rc != 0) { 11153 pr_err("error %d\n", rc); 11154 goto rw_error; 11155 } 11156 11157 ext_attr->hi_cfg_ctrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; 11158 rc = hi_cfg_command(demod); 11159 if (rc != 0) { 11160 pr_err("error %d\n", rc); 11161 goto rw_error; 11162 } 11163 } 11164 } 11165 11166 common_attr->current_power_mode = *mode; 11167 11168 return 0; 11169 rw_error: 11170 return rc; 11171 } 11172 11173 /*============================================================================*/ 11174 /*== CTRL Set/Get Config related functions ===================================*/ 11175 /*============================================================================*/ 11176 11177 /* 11178 * \fn int ctrl_set_cfg_pre_saw() 11179 * \brief Set Pre-saw reference. 11180 * \param demod demod instance 11181 * \param u16 * 11182 * \return int. 11183 * 11184 * Check arguments 11185 * Dispatch handling to standard specific function. 11186 * 11187 */ 11188 static int 11189 ctrl_set_cfg_pre_saw(struct drx_demod_instance *demod, struct drxj_cfg_pre_saw *pre_saw) 11190 { 11191 struct i2c_device_addr *dev_addr = NULL; 11192 struct drxj_data *ext_attr = NULL; 11193 int rc; 11194 11195 dev_addr = demod->my_i2c_dev_addr; 11196 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11197 11198 /* check arguments */ 11199 if ((pre_saw == NULL) || (pre_saw->reference > IQM_AF_PDREF__M) 11200 ) { 11201 return -EINVAL; 11202 } 11203 11204 /* Only if standard is currently active */ 11205 if ((ext_attr->standard == pre_saw->standard) || 11206 (DRXJ_ISQAMSTD(ext_attr->standard) && 11207 DRXJ_ISQAMSTD(pre_saw->standard)) || 11208 (DRXJ_ISATVSTD(ext_attr->standard) && 11209 DRXJ_ISATVSTD(pre_saw->standard))) { 11210 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PDREF__A, pre_saw->reference, 0); 11211 if (rc != 0) { 11212 pr_err("error %d\n", rc); 11213 goto rw_error; 11214 } 11215 } 11216 11217 /* Store pre-saw settings */ 11218 switch (pre_saw->standard) { 11219 case DRX_STANDARD_8VSB: 11220 ext_attr->vsb_pre_saw_cfg = *pre_saw; 11221 break; 11222 #ifndef DRXJ_VSB_ONLY 11223 case DRX_STANDARD_ITU_A: /* fallthrough */ 11224 case DRX_STANDARD_ITU_B: /* fallthrough */ 11225 case DRX_STANDARD_ITU_C: 11226 ext_attr->qam_pre_saw_cfg = *pre_saw; 11227 break; 11228 #endif 11229 default: 11230 return -EINVAL; 11231 } 11232 11233 return 0; 11234 rw_error: 11235 return rc; 11236 } 11237 11238 /*============================================================================*/ 11239 11240 /* 11241 * \fn int ctrl_set_cfg_afe_gain() 11242 * \brief Set AFE Gain. 11243 * \param demod demod instance 11244 * \param u16 * 11245 * \return int. 11246 * 11247 * Check arguments 11248 * Dispatch handling to standard specific function. 11249 * 11250 */ 11251 static int 11252 ctrl_set_cfg_afe_gain(struct drx_demod_instance *demod, struct drxj_cfg_afe_gain *afe_gain) 11253 { 11254 struct i2c_device_addr *dev_addr = NULL; 11255 struct drxj_data *ext_attr = NULL; 11256 int rc; 11257 u8 gain = 0; 11258 11259 /* check arguments */ 11260 if (afe_gain == NULL) 11261 return -EINVAL; 11262 11263 dev_addr = demod->my_i2c_dev_addr; 11264 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11265 11266 switch (afe_gain->standard) { 11267 case DRX_STANDARD_8VSB: /* fallthrough */ 11268 #ifndef DRXJ_VSB_ONLY 11269 case DRX_STANDARD_ITU_A: /* fallthrough */ 11270 case DRX_STANDARD_ITU_B: /* fallthrough */ 11271 case DRX_STANDARD_ITU_C: 11272 #endif 11273 /* Do nothing */ 11274 break; 11275 default: 11276 return -EINVAL; 11277 } 11278 11279 /* TODO PGA gain is also written by microcode (at least by QAM and VSB) 11280 So I (PJ) think interface requires choice between auto, user mode */ 11281 11282 if (afe_gain->gain >= 329) 11283 gain = 15; 11284 else if (afe_gain->gain <= 147) 11285 gain = 0; 11286 else 11287 gain = (afe_gain->gain - 140 + 6) / 13; 11288 11289 /* Only if standard is currently active */ 11290 if (ext_attr->standard == afe_gain->standard) { 11291 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PGA_GAIN__A, gain, 0); 11292 if (rc != 0) { 11293 pr_err("error %d\n", rc); 11294 goto rw_error; 11295 } 11296 } 11297 11298 /* Store AFE Gain settings */ 11299 switch (afe_gain->standard) { 11300 case DRX_STANDARD_8VSB: 11301 ext_attr->vsb_pga_cfg = gain * 13 + 140; 11302 break; 11303 #ifndef DRXJ_VSB_ONLY 11304 case DRX_STANDARD_ITU_A: /* fallthrough */ 11305 case DRX_STANDARD_ITU_B: /* fallthrough */ 11306 case DRX_STANDARD_ITU_C: 11307 ext_attr->qam_pga_cfg = gain * 13 + 140; 11308 break; 11309 #endif 11310 default: 11311 return -EIO; 11312 } 11313 11314 return 0; 11315 rw_error: 11316 return rc; 11317 } 11318 11319 /*============================================================================*/ 11320 11321 11322 /*============================================================================= 11323 ===== EXPORTED FUNCTIONS ====================================================*/ 11324 11325 static int drx_ctrl_u_code(struct drx_demod_instance *demod, 11326 struct drxu_code_info *mc_info, 11327 enum drxu_code_action action); 11328 static int drxj_set_lna_state(struct drx_demod_instance *demod, bool state); 11329 11330 /* 11331 * \fn drxj_open() 11332 * \brief Open the demod instance, configure device, configure drxdriver 11333 * \return Status_t Return status. 11334 * 11335 * drxj_open() can be called with a NULL ucode image => no ucode upload. 11336 * This means that drxj_open() must NOT contain SCU commands or, in general, 11337 * rely on SCU or AUD ucode to be present. 11338 * 11339 */ 11340 11341 static int drxj_open(struct drx_demod_instance *demod) 11342 { 11343 struct i2c_device_addr *dev_addr = NULL; 11344 struct drxj_data *ext_attr = NULL; 11345 struct drx_common_attr *common_attr = NULL; 11346 u32 driver_version = 0; 11347 struct drxu_code_info ucode_info; 11348 struct drx_cfg_mpeg_output cfg_mpeg_output; 11349 int rc; 11350 enum drx_power_mode power_mode = DRX_POWER_UP; 11351 11352 if ((demod == NULL) || 11353 (demod->my_common_attr == NULL) || 11354 (demod->my_ext_attr == NULL) || 11355 (demod->my_i2c_dev_addr == NULL) || 11356 (demod->my_common_attr->is_opened)) { 11357 return -EINVAL; 11358 } 11359 11360 /* Check arguments */ 11361 if (demod->my_ext_attr == NULL) 11362 return -EINVAL; 11363 11364 dev_addr = demod->my_i2c_dev_addr; 11365 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11366 common_attr = (struct drx_common_attr *) demod->my_common_attr; 11367 11368 rc = ctrl_power_mode(demod, &power_mode); 11369 if (rc != 0) { 11370 pr_err("error %d\n", rc); 11371 goto rw_error; 11372 } 11373 if (power_mode != DRX_POWER_UP) { 11374 rc = -EINVAL; 11375 pr_err("failed to powerup device\n"); 11376 goto rw_error; 11377 } 11378 11379 /* has to be in front of setIqmAf and setOrxNsuAox */ 11380 rc = get_device_capabilities(demod); 11381 if (rc != 0) { 11382 pr_err("error %d\n", rc); 11383 goto rw_error; 11384 } 11385 11386 /* 11387 * Soft reset of sys- and osc-clockdomain 11388 * 11389 * HACK: On windows, it writes a 0x07 here, instead of just 0x03. 11390 * As we didn't load the firmware here yet, we should do the same. 11391 * Btw, this is coherent with DRX-K, where we send reset codes 11392 * for modulation (OFTM, in DRX-k), SYS and OSC clock domains. 11393 */ 11394 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_SOFT_RST__A, (0x04 | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M), 0); 11395 if (rc != 0) { 11396 pr_err("error %d\n", rc); 11397 goto rw_error; 11398 } 11399 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY, 0); 11400 if (rc != 0) { 11401 pr_err("error %d\n", rc); 11402 goto rw_error; 11403 } 11404 msleep(1); 11405 11406 /* TODO first make sure that everything keeps working before enabling this */ 11407 /* PowerDownAnalogBlocks() */ 11408 rc = drxj_dap_write_reg16(dev_addr, ATV_TOP_STDBY__A, (~ATV_TOP_STDBY_CVBS_STDBY_A2_ACTIVE) | ATV_TOP_STDBY_SIF_STDBY_STANDBY, 0); 11409 if (rc != 0) { 11410 pr_err("error %d\n", rc); 11411 goto rw_error; 11412 } 11413 11414 rc = set_iqm_af(demod, false); 11415 if (rc != 0) { 11416 pr_err("error %d\n", rc); 11417 goto rw_error; 11418 } 11419 rc = set_orx_nsu_aox(demod, false); 11420 if (rc != 0) { 11421 pr_err("error %d\n", rc); 11422 goto rw_error; 11423 } 11424 11425 rc = init_hi(demod); 11426 if (rc != 0) { 11427 pr_err("error %d\n", rc); 11428 goto rw_error; 11429 } 11430 11431 /* disable mpegoutput pins */ 11432 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 11433 cfg_mpeg_output.enable_mpeg_output = false; 11434 11435 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 11436 if (rc != 0) { 11437 pr_err("error %d\n", rc); 11438 goto rw_error; 11439 } 11440 /* Stop AUD Inform SetAudio it will need to do all setting */ 11441 rc = power_down_aud(demod); 11442 if (rc != 0) { 11443 pr_err("error %d\n", rc); 11444 goto rw_error; 11445 } 11446 /* Stop SCU */ 11447 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP, 0); 11448 if (rc != 0) { 11449 pr_err("error %d\n", rc); 11450 goto rw_error; 11451 } 11452 11453 /* Upload microcode */ 11454 if (common_attr->microcode_file != NULL) { 11455 /* Dirty trick to use common ucode upload & verify, 11456 pretend device is already open */ 11457 common_attr->is_opened = true; 11458 ucode_info.mc_file = common_attr->microcode_file; 11459 11460 if (DRX_ISPOWERDOWNMODE(demod->my_common_attr->current_power_mode)) { 11461 pr_err("Should powerup before loading the firmware."); 11462 return -EINVAL; 11463 } 11464 11465 rc = drx_ctrl_u_code(demod, &ucode_info, UCODE_UPLOAD); 11466 if (rc != 0) { 11467 pr_err("error %d while uploading the firmware\n", rc); 11468 goto rw_error; 11469 } 11470 if (common_attr->verify_microcode == true) { 11471 rc = drx_ctrl_u_code(demod, &ucode_info, UCODE_VERIFY); 11472 if (rc != 0) { 11473 pr_err("error %d while verifying the firmware\n", 11474 rc); 11475 goto rw_error; 11476 } 11477 } 11478 common_attr->is_opened = false; 11479 } 11480 11481 /* Run SCU for a little while to initialize microcode version numbers */ 11482 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE, 0); 11483 if (rc != 0) { 11484 pr_err("error %d\n", rc); 11485 goto rw_error; 11486 } 11487 11488 /* Initialize scan timeout */ 11489 common_attr->scan_demod_lock_timeout = DRXJ_SCAN_TIMEOUT; 11490 common_attr->scan_desired_lock = DRX_LOCKED; 11491 11492 drxj_reset_mode(ext_attr); 11493 ext_attr->standard = DRX_STANDARD_UNKNOWN; 11494 11495 rc = smart_ant_init(demod); 11496 if (rc != 0) { 11497 pr_err("error %d\n", rc); 11498 goto rw_error; 11499 } 11500 11501 /* Stamp driver version number in SCU data RAM in BCD code 11502 Done to enable field application engineers to retrieve drxdriver version 11503 via I2C from SCU RAM 11504 */ 11505 driver_version = (VERSION_MAJOR / 100) % 10; 11506 driver_version <<= 4; 11507 driver_version += (VERSION_MAJOR / 10) % 10; 11508 driver_version <<= 4; 11509 driver_version += (VERSION_MAJOR % 10); 11510 driver_version <<= 4; 11511 driver_version += (VERSION_MINOR % 10); 11512 driver_version <<= 4; 11513 driver_version += (VERSION_PATCH / 1000) % 10; 11514 driver_version <<= 4; 11515 driver_version += (VERSION_PATCH / 100) % 10; 11516 driver_version <<= 4; 11517 driver_version += (VERSION_PATCH / 10) % 10; 11518 driver_version <<= 4; 11519 driver_version += (VERSION_PATCH % 10); 11520 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_DRIVER_VER_HI__A, (u16)(driver_version >> 16), 0); 11521 if (rc != 0) { 11522 pr_err("error %d\n", rc); 11523 goto rw_error; 11524 } 11525 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_DRIVER_VER_LO__A, (u16)(driver_version & 0xFFFF), 0); 11526 if (rc != 0) { 11527 pr_err("error %d\n", rc); 11528 goto rw_error; 11529 } 11530 11531 rc = ctrl_set_oob(demod, NULL); 11532 if (rc != 0) { 11533 pr_err("error %d\n", rc); 11534 goto rw_error; 11535 } 11536 11537 /* refresh the audio data structure with default */ 11538 ext_attr->aud_data = drxj_default_aud_data_g; 11539 11540 demod->my_common_attr->is_opened = true; 11541 drxj_set_lna_state(demod, false); 11542 return 0; 11543 rw_error: 11544 common_attr->is_opened = false; 11545 return rc; 11546 } 11547 11548 /*============================================================================*/ 11549 /* 11550 * \fn drxj_close() 11551 * \brief Close the demod instance, power down the device 11552 * \return Status_t Return status. 11553 * 11554 */ 11555 static int drxj_close(struct drx_demod_instance *demod) 11556 { 11557 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 11558 int rc; 11559 enum drx_power_mode power_mode = DRX_POWER_UP; 11560 11561 if ((demod->my_common_attr == NULL) || 11562 (demod->my_ext_attr == NULL) || 11563 (demod->my_i2c_dev_addr == NULL) || 11564 (!demod->my_common_attr->is_opened)) { 11565 return -EINVAL; 11566 } 11567 11568 /* power up */ 11569 rc = ctrl_power_mode(demod, &power_mode); 11570 if (rc != 0) { 11571 pr_err("error %d\n", rc); 11572 goto rw_error; 11573 } 11574 11575 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE, 0); 11576 if (rc != 0) { 11577 pr_err("error %d\n", rc); 11578 goto rw_error; 11579 } 11580 power_mode = DRX_POWER_DOWN; 11581 rc = ctrl_power_mode(demod, &power_mode); 11582 if (rc != 0) { 11583 pr_err("error %d\n", rc); 11584 goto rw_error; 11585 } 11586 11587 DRX_ATTR_ISOPENED(demod) = false; 11588 11589 return 0; 11590 rw_error: 11591 DRX_ATTR_ISOPENED(demod) = false; 11592 11593 return rc; 11594 } 11595 11596 /* 11597 * Microcode related functions 11598 */ 11599 11600 /* 11601 * drx_u_code_compute_crc - Compute CRC of block of microcode data. 11602 * @block_data: Pointer to microcode data. 11603 * @nr_words: Size of microcode block (number of 16 bits words). 11604 * 11605 * returns The computed CRC residue. 11606 */ 11607 static u16 drx_u_code_compute_crc(u8 *block_data, u16 nr_words) 11608 { 11609 u16 i = 0; 11610 u16 j = 0; 11611 u32 crc_word = 0; 11612 u32 carry = 0; 11613 11614 while (i < nr_words) { 11615 crc_word |= (u32)be16_to_cpu(*(__be16 *)(block_data)); 11616 for (j = 0; j < 16; j++) { 11617 crc_word <<= 1; 11618 if (carry != 0) 11619 crc_word ^= 0x80050000UL; 11620 carry = crc_word & 0x80000000UL; 11621 } 11622 i++; 11623 block_data += (sizeof(u16)); 11624 } 11625 return (u16)(crc_word >> 16); 11626 } 11627 11628 /* 11629 * drx_check_firmware - checks if the loaded firmware is valid 11630 * 11631 * @demod: demod structure 11632 * @mc_data: pointer to the start of the firmware 11633 * @size: firmware size 11634 */ 11635 static int drx_check_firmware(struct drx_demod_instance *demod, u8 *mc_data, 11636 unsigned size) 11637 { 11638 struct drxu_code_block_hdr block_hdr; 11639 int i; 11640 unsigned count = 2 * sizeof(u16); 11641 u32 mc_dev_type, mc_version, mc_base_version; 11642 u16 mc_nr_of_blks = be16_to_cpu(*(__be16 *)(mc_data + sizeof(u16))); 11643 11644 /* 11645 * Scan microcode blocks first for version info 11646 * and firmware check 11647 */ 11648 11649 /* Clear version block */ 11650 DRX_ATTR_MCRECORD(demod).aux_type = 0; 11651 DRX_ATTR_MCRECORD(demod).mc_dev_type = 0; 11652 DRX_ATTR_MCRECORD(demod).mc_version = 0; 11653 DRX_ATTR_MCRECORD(demod).mc_base_version = 0; 11654 11655 for (i = 0; i < mc_nr_of_blks; i++) { 11656 if (count + 3 * sizeof(u16) + sizeof(u32) > size) 11657 goto eof; 11658 11659 /* Process block header */ 11660 block_hdr.addr = be32_to_cpu(*(__be32 *)(mc_data + count)); 11661 count += sizeof(u32); 11662 block_hdr.size = be16_to_cpu(*(__be16 *)(mc_data + count)); 11663 count += sizeof(u16); 11664 block_hdr.flags = be16_to_cpu(*(__be16 *)(mc_data + count)); 11665 count += sizeof(u16); 11666 block_hdr.CRC = be16_to_cpu(*(__be16 *)(mc_data + count)); 11667 count += sizeof(u16); 11668 11669 pr_debug("%u: addr %u, size %u, flags 0x%04x, CRC 0x%04x\n", 11670 count, block_hdr.addr, block_hdr.size, block_hdr.flags, 11671 block_hdr.CRC); 11672 11673 if (block_hdr.flags & 0x8) { 11674 u8 *auxblk = ((void *)mc_data) + block_hdr.addr; 11675 u16 auxtype; 11676 11677 if (block_hdr.addr + sizeof(u16) > size) 11678 goto eof; 11679 11680 auxtype = be16_to_cpu(*(__be16 *)(auxblk)); 11681 11682 /* Aux block. Check type */ 11683 if (DRX_ISMCVERTYPE(auxtype)) { 11684 if (block_hdr.addr + 2 * sizeof(u16) + 2 * sizeof (u32) > size) 11685 goto eof; 11686 11687 auxblk += sizeof(u16); 11688 mc_dev_type = be32_to_cpu(*(__be32 *)(auxblk)); 11689 auxblk += sizeof(u32); 11690 mc_version = be32_to_cpu(*(__be32 *)(auxblk)); 11691 auxblk += sizeof(u32); 11692 mc_base_version = be32_to_cpu(*(__be32 *)(auxblk)); 11693 11694 DRX_ATTR_MCRECORD(demod).aux_type = auxtype; 11695 DRX_ATTR_MCRECORD(demod).mc_dev_type = mc_dev_type; 11696 DRX_ATTR_MCRECORD(demod).mc_version = mc_version; 11697 DRX_ATTR_MCRECORD(demod).mc_base_version = mc_base_version; 11698 11699 pr_info("Firmware dev %x, ver %x, base ver %x\n", 11700 mc_dev_type, mc_version, mc_base_version); 11701 11702 } 11703 } else if (count + block_hdr.size * sizeof(u16) > size) 11704 goto eof; 11705 11706 count += block_hdr.size * sizeof(u16); 11707 } 11708 return 0; 11709 eof: 11710 pr_err("Firmware is truncated at pos %u/%u\n", count, size); 11711 return -EINVAL; 11712 } 11713 11714 /* 11715 * drx_ctrl_u_code - Handle microcode upload or verify. 11716 * @dev_addr: Address of device. 11717 * @mc_info: Pointer to information about microcode data. 11718 * @action: Either UCODE_UPLOAD or UCODE_VERIFY 11719 * 11720 * This function returns: 11721 * 0: 11722 * - In case of UCODE_UPLOAD: code is successfully uploaded. 11723 * - In case of UCODE_VERIFY: image on device is equal to 11724 * image provided to this control function. 11725 * -EIO: 11726 * - In case of UCODE_UPLOAD: I2C error. 11727 * - In case of UCODE_VERIFY: I2C error or image on device 11728 * is not equal to image provided to this control function. 11729 * -EINVAL: 11730 * - Invalid arguments. 11731 * - Provided image is corrupt 11732 */ 11733 static int drx_ctrl_u_code(struct drx_demod_instance *demod, 11734 struct drxu_code_info *mc_info, 11735 enum drxu_code_action action) 11736 { 11737 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 11738 int rc; 11739 u16 i = 0; 11740 u16 mc_nr_of_blks = 0; 11741 u16 mc_magic_word = 0; 11742 const u8 *mc_data_init = NULL; 11743 u8 *mc_data = NULL; 11744 unsigned size; 11745 char *mc_file; 11746 11747 /* Check arguments */ 11748 if (!mc_info || !mc_info->mc_file) 11749 return -EINVAL; 11750 11751 mc_file = mc_info->mc_file; 11752 11753 if (!demod->firmware) { 11754 const struct firmware *fw = NULL; 11755 11756 rc = request_firmware(&fw, mc_file, demod->i2c->dev.parent); 11757 if (rc < 0) { 11758 pr_err("Couldn't read firmware %s\n", mc_file); 11759 return rc; 11760 } 11761 demod->firmware = fw; 11762 11763 if (demod->firmware->size < 2 * sizeof(u16)) { 11764 rc = -EINVAL; 11765 pr_err("Firmware is too short!\n"); 11766 goto release; 11767 } 11768 11769 pr_info("Firmware %s, size %zu\n", 11770 mc_file, demod->firmware->size); 11771 } 11772 11773 mc_data_init = demod->firmware->data; 11774 size = demod->firmware->size; 11775 11776 mc_data = (void *)mc_data_init; 11777 /* Check data */ 11778 mc_magic_word = be16_to_cpu(*(__be16 *)(mc_data)); 11779 mc_data += sizeof(u16); 11780 mc_nr_of_blks = be16_to_cpu(*(__be16 *)(mc_data)); 11781 mc_data += sizeof(u16); 11782 11783 if ((mc_magic_word != DRX_UCODE_MAGIC_WORD) || (mc_nr_of_blks == 0)) { 11784 rc = -EINVAL; 11785 pr_err("Firmware magic word doesn't match\n"); 11786 goto release; 11787 } 11788 11789 if (action == UCODE_UPLOAD) { 11790 rc = drx_check_firmware(demod, (u8 *)mc_data_init, size); 11791 if (rc) 11792 goto release; 11793 pr_info("Uploading firmware %s\n", mc_file); 11794 } else { 11795 pr_info("Verifying if firmware upload was ok.\n"); 11796 } 11797 11798 /* Process microcode blocks */ 11799 for (i = 0; i < mc_nr_of_blks; i++) { 11800 struct drxu_code_block_hdr block_hdr; 11801 u16 mc_block_nr_bytes = 0; 11802 11803 /* Process block header */ 11804 block_hdr.addr = be32_to_cpu(*(__be32 *)(mc_data)); 11805 mc_data += sizeof(u32); 11806 block_hdr.size = be16_to_cpu(*(__be16 *)(mc_data)); 11807 mc_data += sizeof(u16); 11808 block_hdr.flags = be16_to_cpu(*(__be16 *)(mc_data)); 11809 mc_data += sizeof(u16); 11810 block_hdr.CRC = be16_to_cpu(*(__be16 *)(mc_data)); 11811 mc_data += sizeof(u16); 11812 11813 pr_debug("%zd: addr %u, size %u, flags 0x%04x, CRC 0x%04x\n", 11814 (mc_data - mc_data_init), block_hdr.addr, 11815 block_hdr.size, block_hdr.flags, block_hdr.CRC); 11816 11817 /* Check block header on: 11818 - data larger than 64Kb 11819 - if CRC enabled check CRC 11820 */ 11821 if ((block_hdr.size > 0x7FFF) || 11822 (((block_hdr.flags & DRX_UCODE_CRC_FLAG) != 0) && 11823 (block_hdr.CRC != drx_u_code_compute_crc(mc_data, block_hdr.size))) 11824 ) { 11825 /* Wrong data ! */ 11826 rc = -EINVAL; 11827 pr_err("firmware CRC is wrong\n"); 11828 goto release; 11829 } 11830 11831 if (!block_hdr.size) 11832 continue; 11833 11834 mc_block_nr_bytes = block_hdr.size * ((u16) sizeof(u16)); 11835 11836 /* Perform the desired action */ 11837 switch (action) { 11838 case UCODE_UPLOAD: /* Upload microcode */ 11839 if (drxdap_fasi_write_block(dev_addr, 11840 block_hdr.addr, 11841 mc_block_nr_bytes, 11842 mc_data, 0x0000)) { 11843 rc = -EIO; 11844 pr_err("error writing firmware at pos %zd\n", 11845 mc_data - mc_data_init); 11846 goto release; 11847 } 11848 break; 11849 case UCODE_VERIFY: { /* Verify uploaded microcode */ 11850 int result = 0; 11851 u8 mc_data_buffer[DRX_UCODE_MAX_BUF_SIZE]; 11852 u32 bytes_to_comp = 0; 11853 u32 bytes_left = mc_block_nr_bytes; 11854 u32 curr_addr = block_hdr.addr; 11855 u8 *curr_ptr = mc_data; 11856 11857 while (bytes_left != 0) { 11858 if (bytes_left > DRX_UCODE_MAX_BUF_SIZE) 11859 bytes_to_comp = DRX_UCODE_MAX_BUF_SIZE; 11860 else 11861 bytes_to_comp = bytes_left; 11862 11863 if (drxdap_fasi_read_block(dev_addr, 11864 curr_addr, 11865 (u16)bytes_to_comp, 11866 (u8 *)mc_data_buffer, 11867 0x0000)) { 11868 pr_err("error reading firmware at pos %zd\n", 11869 mc_data - mc_data_init); 11870 return -EIO; 11871 } 11872 11873 result = memcmp(curr_ptr, mc_data_buffer, 11874 bytes_to_comp); 11875 11876 if (result) { 11877 pr_err("error verifying firmware at pos %zd\n", 11878 mc_data - mc_data_init); 11879 return -EIO; 11880 } 11881 11882 curr_addr += ((dr_xaddr_t)(bytes_to_comp / 2)); 11883 curr_ptr =&(curr_ptr[bytes_to_comp]); 11884 bytes_left -=((u32) bytes_to_comp); 11885 } 11886 break; 11887 } 11888 default: 11889 return -EINVAL; 11890 break; 11891 11892 } 11893 mc_data += mc_block_nr_bytes; 11894 } 11895 11896 return 0; 11897 11898 release: 11899 release_firmware(demod->firmware); 11900 demod->firmware = NULL; 11901 11902 return rc; 11903 } 11904 11905 /* caller is expected to check if lna is supported before enabling */ 11906 static int drxj_set_lna_state(struct drx_demod_instance *demod, bool state) 11907 { 11908 struct drxuio_cfg uio_cfg; 11909 struct drxuio_data uio_data; 11910 int result; 11911 11912 uio_cfg.uio = DRX_UIO1; 11913 uio_cfg.mode = DRX_UIO_MODE_READWRITE; 11914 /* Configure user-I/O #3: enable read/write */ 11915 result = ctrl_set_uio_cfg(demod, &uio_cfg); 11916 if (result) { 11917 pr_err("Failed to setup LNA GPIO!\n"); 11918 return result; 11919 } 11920 11921 uio_data.uio = DRX_UIO1; 11922 uio_data.value = state; 11923 result = ctrl_uio_write(demod, &uio_data); 11924 if (result != 0) { 11925 pr_err("Failed to %sable LNA!\n", 11926 state ? "en" : "dis"); 11927 return result; 11928 } 11929 return 0; 11930 } 11931 11932 /* 11933 * The Linux DVB Driver for Micronas DRX39xx family (drx3933j) 11934 * 11935 * Written by Devin Heitmueller <devin.heitmueller@kernellabs.com> 11936 */ 11937 11938 static int drx39xxj_set_powerstate(struct dvb_frontend *fe, int enable) 11939 { 11940 struct drx39xxj_state *state = fe->demodulator_priv; 11941 struct drx_demod_instance *demod = state->demod; 11942 int result; 11943 enum drx_power_mode power_mode; 11944 11945 if (enable) 11946 power_mode = DRX_POWER_UP; 11947 else 11948 power_mode = DRX_POWER_DOWN; 11949 11950 result = ctrl_power_mode(demod, &power_mode); 11951 if (result != 0) { 11952 pr_err("Power state change failed\n"); 11953 return 0; 11954 } 11955 11956 return 0; 11957 } 11958 11959 static int drx39xxj_read_status(struct dvb_frontend *fe, enum fe_status *status) 11960 { 11961 struct drx39xxj_state *state = fe->demodulator_priv; 11962 struct drx_demod_instance *demod = state->demod; 11963 int result; 11964 enum drx_lock_status lock_status; 11965 11966 *status = 0; 11967 11968 result = ctrl_lock_status(demod, &lock_status); 11969 if (result != 0) { 11970 pr_err("drx39xxj: could not get lock status!\n"); 11971 *status = 0; 11972 } 11973 11974 switch (lock_status) { 11975 case DRX_NEVER_LOCK: 11976 *status = 0; 11977 pr_err("drx says NEVER_LOCK\n"); 11978 break; 11979 case DRX_NOT_LOCKED: 11980 *status = 0; 11981 break; 11982 case DRX_LOCK_STATE_1: 11983 case DRX_LOCK_STATE_2: 11984 case DRX_LOCK_STATE_3: 11985 case DRX_LOCK_STATE_4: 11986 case DRX_LOCK_STATE_5: 11987 case DRX_LOCK_STATE_6: 11988 case DRX_LOCK_STATE_7: 11989 case DRX_LOCK_STATE_8: 11990 case DRX_LOCK_STATE_9: 11991 *status = FE_HAS_SIGNAL 11992 | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC; 11993 break; 11994 case DRX_LOCKED: 11995 *status = FE_HAS_SIGNAL 11996 | FE_HAS_CARRIER 11997 | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; 11998 break; 11999 default: 12000 pr_err("Lock state unknown %d\n", lock_status); 12001 } 12002 ctrl_sig_quality(demod, lock_status); 12003 12004 return 0; 12005 } 12006 12007 static int drx39xxj_read_ber(struct dvb_frontend *fe, u32 *ber) 12008 { 12009 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12010 12011 if (p->pre_bit_error.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12012 *ber = 0; 12013 return 0; 12014 } 12015 12016 if (!p->pre_bit_count.stat[0].uvalue) { 12017 if (!p->pre_bit_error.stat[0].uvalue) 12018 *ber = 0; 12019 else 12020 *ber = 1000000; 12021 } else { 12022 *ber = frac_times1e6(p->pre_bit_error.stat[0].uvalue, 12023 p->pre_bit_count.stat[0].uvalue); 12024 } 12025 return 0; 12026 } 12027 12028 static int drx39xxj_read_signal_strength(struct dvb_frontend *fe, 12029 u16 *strength) 12030 { 12031 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12032 12033 if (p->strength.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12034 *strength = 0; 12035 return 0; 12036 } 12037 12038 *strength = p->strength.stat[0].uvalue; 12039 return 0; 12040 } 12041 12042 static int drx39xxj_read_snr(struct dvb_frontend *fe, u16 *snr) 12043 { 12044 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12045 u64 tmp64; 12046 12047 if (p->cnr.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12048 *snr = 0; 12049 return 0; 12050 } 12051 12052 tmp64 = p->cnr.stat[0].svalue; 12053 do_div(tmp64, 10); 12054 *snr = tmp64; 12055 return 0; 12056 } 12057 12058 static int drx39xxj_read_ucblocks(struct dvb_frontend *fe, u32 *ucb) 12059 { 12060 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12061 12062 if (p->block_error.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12063 *ucb = 0; 12064 return 0; 12065 } 12066 12067 *ucb = p->block_error.stat[0].uvalue; 12068 return 0; 12069 } 12070 12071 static int drx39xxj_set_frontend(struct dvb_frontend *fe) 12072 { 12073 #ifdef DJH_DEBUG 12074 int i; 12075 #endif 12076 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12077 struct drx39xxj_state *state = fe->demodulator_priv; 12078 struct drx_demod_instance *demod = state->demod; 12079 enum drx_standard standard = DRX_STANDARD_8VSB; 12080 struct drx_channel channel; 12081 int result; 12082 static const struct drx_channel def_channel = { 12083 /* frequency */ 0, 12084 /* bandwidth */ DRX_BANDWIDTH_6MHZ, 12085 /* mirror */ DRX_MIRROR_NO, 12086 /* constellation */ DRX_CONSTELLATION_AUTO, 12087 /* hierarchy */ DRX_HIERARCHY_UNKNOWN, 12088 /* priority */ DRX_PRIORITY_UNKNOWN, 12089 /* coderate */ DRX_CODERATE_UNKNOWN, 12090 /* guard */ DRX_GUARD_UNKNOWN, 12091 /* fftmode */ DRX_FFTMODE_UNKNOWN, 12092 /* classification */ DRX_CLASSIFICATION_AUTO, 12093 /* symbolrate */ 5057000, 12094 /* interleavemode */ DRX_INTERLEAVEMODE_UNKNOWN, 12095 /* ldpc */ DRX_LDPC_UNKNOWN, 12096 /* carrier */ DRX_CARRIER_UNKNOWN, 12097 /* frame mode */ DRX_FRAMEMODE_UNKNOWN 12098 }; 12099 u32 constellation = DRX_CONSTELLATION_AUTO; 12100 12101 /* Bring the demod out of sleep */ 12102 drx39xxj_set_powerstate(fe, 1); 12103 12104 if (fe->ops.tuner_ops.set_params) { 12105 u32 int_freq; 12106 12107 if (fe->ops.i2c_gate_ctrl) 12108 fe->ops.i2c_gate_ctrl(fe, 1); 12109 12110 /* Set tuner to desired frequency and standard */ 12111 fe->ops.tuner_ops.set_params(fe); 12112 12113 /* Use the tuner's IF */ 12114 if (fe->ops.tuner_ops.get_if_frequency) { 12115 fe->ops.tuner_ops.get_if_frequency(fe, &int_freq); 12116 demod->my_common_attr->intermediate_freq = int_freq / 1000; 12117 } 12118 12119 if (fe->ops.i2c_gate_ctrl) 12120 fe->ops.i2c_gate_ctrl(fe, 0); 12121 } 12122 12123 switch (p->delivery_system) { 12124 case SYS_ATSC: 12125 standard = DRX_STANDARD_8VSB; 12126 break; 12127 case SYS_DVBC_ANNEX_B: 12128 standard = DRX_STANDARD_ITU_B; 12129 12130 switch (p->modulation) { 12131 case QAM_64: 12132 constellation = DRX_CONSTELLATION_QAM64; 12133 break; 12134 case QAM_256: 12135 constellation = DRX_CONSTELLATION_QAM256; 12136 break; 12137 default: 12138 constellation = DRX_CONSTELLATION_AUTO; 12139 break; 12140 } 12141 break; 12142 default: 12143 return -EINVAL; 12144 } 12145 /* Set the standard (will be powered up if necessary */ 12146 result = ctrl_set_standard(demod, &standard); 12147 if (result != 0) { 12148 pr_err("Failed to set standard! result=%02x\n", 12149 result); 12150 return -EINVAL; 12151 } 12152 12153 /* set channel parameters */ 12154 channel = def_channel; 12155 channel.frequency = p->frequency / 1000; 12156 channel.bandwidth = DRX_BANDWIDTH_6MHZ; 12157 channel.constellation = constellation; 12158 12159 /* program channel */ 12160 result = ctrl_set_channel(demod, &channel); 12161 if (result != 0) { 12162 pr_err("Failed to set channel!\n"); 12163 return -EINVAL; 12164 } 12165 /* Just for giggles, let's shut off the LNA again.... */ 12166 drxj_set_lna_state(demod, false); 12167 12168 /* After set_frontend, except for strength, stats aren't available */ 12169 p->strength.stat[0].scale = FE_SCALE_RELATIVE; 12170 12171 return 0; 12172 } 12173 12174 static int drx39xxj_sleep(struct dvb_frontend *fe) 12175 { 12176 /* power-down the demodulator */ 12177 return drx39xxj_set_powerstate(fe, 0); 12178 } 12179 12180 static int drx39xxj_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) 12181 { 12182 struct drx39xxj_state *state = fe->demodulator_priv; 12183 struct drx_demod_instance *demod = state->demod; 12184 bool i2c_gate_state; 12185 int result; 12186 12187 #ifdef DJH_DEBUG 12188 pr_debug("i2c gate call: enable=%d state=%d\n", enable, 12189 state->i2c_gate_open); 12190 #endif 12191 12192 if (enable) 12193 i2c_gate_state = true; 12194 else 12195 i2c_gate_state = false; 12196 12197 if (state->i2c_gate_open == enable) { 12198 /* We're already in the desired state */ 12199 return 0; 12200 } 12201 12202 result = ctrl_i2c_bridge(demod, &i2c_gate_state); 12203 if (result != 0) { 12204 pr_err("drx39xxj: could not open i2c gate [%d]\n", 12205 result); 12206 dump_stack(); 12207 } else { 12208 state->i2c_gate_open = enable; 12209 } 12210 return 0; 12211 } 12212 12213 static int drx39xxj_init(struct dvb_frontend *fe) 12214 { 12215 struct drx39xxj_state *state = fe->demodulator_priv; 12216 struct drx_demod_instance *demod = state->demod; 12217 int rc = 0; 12218 12219 if (fe->exit == DVB_FE_DEVICE_RESUME) { 12220 /* so drxj_open() does what it needs to do */ 12221 demod->my_common_attr->is_opened = false; 12222 rc = drxj_open(demod); 12223 if (rc != 0) 12224 pr_err("drx39xxj_init(): DRX open failed rc=%d!\n", rc); 12225 } else 12226 drx39xxj_set_powerstate(fe, 1); 12227 12228 return rc; 12229 } 12230 12231 static int drx39xxj_set_lna(struct dvb_frontend *fe) 12232 { 12233 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 12234 struct drx39xxj_state *state = fe->demodulator_priv; 12235 struct drx_demod_instance *demod = state->demod; 12236 struct drxj_data *ext_attr = demod->my_ext_attr; 12237 12238 if (c->lna) { 12239 if (!ext_attr->has_lna) { 12240 pr_err("LNA is not supported on this device!\n"); 12241 return -EINVAL; 12242 12243 } 12244 } 12245 12246 return drxj_set_lna_state(demod, c->lna); 12247 } 12248 12249 static int drx39xxj_get_tune_settings(struct dvb_frontend *fe, 12250 struct dvb_frontend_tune_settings *tune) 12251 { 12252 tune->min_delay_ms = 1000; 12253 return 0; 12254 } 12255 12256 static void drx39xxj_release(struct dvb_frontend *fe) 12257 { 12258 struct drx39xxj_state *state = fe->demodulator_priv; 12259 struct drx_demod_instance *demod = state->demod; 12260 12261 /* if device is removed don't access it */ 12262 if (fe->exit != DVB_FE_DEVICE_REMOVED) 12263 drxj_close(demod); 12264 12265 kfree(demod->my_ext_attr); 12266 kfree(demod->my_common_attr); 12267 kfree(demod->my_i2c_dev_addr); 12268 release_firmware(demod->firmware); 12269 kfree(demod); 12270 kfree(state); 12271 } 12272 12273 static const struct dvb_frontend_ops drx39xxj_ops; 12274 12275 struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) 12276 { 12277 struct drx39xxj_state *state = NULL; 12278 struct i2c_device_addr *demod_addr = NULL; 12279 struct drx_common_attr *demod_comm_attr = NULL; 12280 struct drxj_data *demod_ext_attr = NULL; 12281 struct drx_demod_instance *demod = NULL; 12282 struct dtv_frontend_properties *p; 12283 int result; 12284 12285 /* allocate memory for the internal state */ 12286 state = kzalloc(sizeof(struct drx39xxj_state), GFP_KERNEL); 12287 if (state == NULL) 12288 goto error; 12289 12290 demod = kmalloc(sizeof(struct drx_demod_instance), GFP_KERNEL); 12291 if (demod == NULL) 12292 goto error; 12293 12294 demod_addr = kmemdup(&drxj_default_addr_g, 12295 sizeof(struct i2c_device_addr), GFP_KERNEL); 12296 if (demod_addr == NULL) 12297 goto error; 12298 12299 demod_comm_attr = kmemdup(&drxj_default_comm_attr_g, 12300 sizeof(struct drx_common_attr), GFP_KERNEL); 12301 if (demod_comm_attr == NULL) 12302 goto error; 12303 12304 demod_ext_attr = kmemdup(&drxj_data_g, sizeof(struct drxj_data), 12305 GFP_KERNEL); 12306 if (demod_ext_attr == NULL) 12307 goto error; 12308 12309 /* setup the state */ 12310 state->i2c = i2c; 12311 state->demod = demod; 12312 12313 /* setup the demod data */ 12314 memcpy(demod, &drxj_default_demod_g, sizeof(struct drx_demod_instance)); 12315 12316 demod->my_i2c_dev_addr = demod_addr; 12317 demod->my_common_attr = demod_comm_attr; 12318 demod->my_i2c_dev_addr->user_data = state; 12319 demod->my_common_attr->microcode_file = DRX39XX_MAIN_FIRMWARE; 12320 demod->my_common_attr->verify_microcode = true; 12321 demod->my_common_attr->intermediate_freq = 5000; 12322 demod->my_common_attr->current_power_mode = DRX_POWER_DOWN; 12323 demod->my_ext_attr = demod_ext_attr; 12324 ((struct drxj_data *)demod_ext_attr)->uio_sma_tx_mode = DRX_UIO_MODE_READWRITE; 12325 demod->i2c = i2c; 12326 12327 result = drxj_open(demod); 12328 if (result != 0) { 12329 pr_err("DRX open failed! Aborting\n"); 12330 goto error; 12331 } 12332 12333 /* create dvb_frontend */ 12334 memcpy(&state->frontend.ops, &drx39xxj_ops, 12335 sizeof(struct dvb_frontend_ops)); 12336 12337 state->frontend.demodulator_priv = state; 12338 12339 /* Initialize stats - needed for DVBv5 stats to work */ 12340 p = &state->frontend.dtv_property_cache; 12341 p->strength.len = 1; 12342 p->pre_bit_count.len = 1; 12343 p->pre_bit_error.len = 1; 12344 p->post_bit_count.len = 1; 12345 p->post_bit_error.len = 1; 12346 p->block_count.len = 1; 12347 p->block_error.len = 1; 12348 p->cnr.len = 1; 12349 12350 p->strength.stat[0].scale = FE_SCALE_RELATIVE; 12351 p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12352 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12353 p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12354 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12355 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12356 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12357 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12358 12359 return &state->frontend; 12360 12361 error: 12362 kfree(demod_ext_attr); 12363 kfree(demod_comm_attr); 12364 kfree(demod_addr); 12365 kfree(demod); 12366 kfree(state); 12367 12368 return NULL; 12369 } 12370 EXPORT_SYMBOL(drx39xxj_attach); 12371 12372 static const struct dvb_frontend_ops drx39xxj_ops = { 12373 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, 12374 .info = { 12375 .name = "Micronas DRX39xxj family Frontend", 12376 .frequency_min_hz = 51 * MHz, 12377 .frequency_max_hz = 858 * MHz, 12378 .frequency_stepsize_hz = 62500, 12379 .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB 12380 }, 12381 12382 .init = drx39xxj_init, 12383 .i2c_gate_ctrl = drx39xxj_i2c_gate_ctrl, 12384 .sleep = drx39xxj_sleep, 12385 .set_frontend = drx39xxj_set_frontend, 12386 .get_tune_settings = drx39xxj_get_tune_settings, 12387 .read_status = drx39xxj_read_status, 12388 .read_ber = drx39xxj_read_ber, 12389 .read_signal_strength = drx39xxj_read_signal_strength, 12390 .read_snr = drx39xxj_read_snr, 12391 .read_ucblocks = drx39xxj_read_ucblocks, 12392 .release = drx39xxj_release, 12393 .set_lna = drx39xxj_set_lna, 12394 }; 12395 12396 MODULE_DESCRIPTION("Micronas DRX39xxj Frontend"); 12397 MODULE_AUTHOR("Devin Heitmueller"); 12398 MODULE_LICENSE("GPL"); 12399 MODULE_FIRMWARE(DRX39XX_MAIN_FIRMWARE); 12400