1 /* 2 Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc. 3 All rights reserved. 4 5 Redistribution and use in source and binary forms, with or without 6 modification, are permitted provided that the following conditions are met: 7 8 * Redistributions of source code must retain the above copyright notice, 9 this list of conditions and the following disclaimer. 10 * Redistributions in binary form must reproduce the above copyright notice, 11 this list of conditions and the following disclaimer in the documentation 12 and/or other materials provided with the distribution. 13 * Neither the name of Trident Microsystems nor Hauppauge Computer Works 14 nor the names of its contributors may be used to endorse or promote 15 products derived from this software without specific prior written 16 permission. 17 18 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 19 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 22 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 POSSIBILITY OF SUCH DAMAGE. 29 30 DRXJ specific implementation of DRX driver 31 authors: Dragan Savic, Milos Nikolic, Mihajlo Katona, Tao Ding, Paul Janssen 32 33 The Linux DVB Driver for Micronas DRX39xx family (drx3933j) was 34 written by Devin Heitmueller <devin.heitmueller@kernellabs.com> 35 36 This program is free software; you can redistribute it and/or modify 37 it under the terms of the GNU General Public License as published by 38 the Free Software Foundation; either version 2 of the License, or 39 (at your option) any later version. 40 41 This program is distributed in the hope that it will be useful, 42 but WITHOUT ANY WARRANTY; without even the implied warranty of 43 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 44 45 GNU General Public License for more details. 46 47 You should have received a copy of the GNU General Public License 48 along with this program; if not, write to the Free Software 49 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 50 */ 51 52 /*----------------------------------------------------------------------------- 53 INCLUDE FILES 54 ----------------------------------------------------------------------------*/ 55 56 #define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__ 57 58 #include <linux/module.h> 59 #include <linux/init.h> 60 #include <linux/string.h> 61 #include <linux/slab.h> 62 #include <asm/div64.h> 63 64 #include <media/dvb_frontend.h> 65 #include "drx39xxj.h" 66 67 #include "drxj.h" 68 #include "drxj_map.h" 69 70 /*============================================================================*/ 71 /*=== DEFINES ================================================================*/ 72 /*============================================================================*/ 73 74 #define DRX39XX_MAIN_FIRMWARE "dvb-fe-drxj-mc-1.0.8.fw" 75 76 /* 77 * \brief Maximum u32 value. 78 */ 79 #ifndef MAX_U32 80 #define MAX_U32 ((u32) (0xFFFFFFFFL)) 81 #endif 82 83 /* Customer configurable hardware settings, etc */ 84 #ifndef MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH 85 #define MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH 0x02 86 #endif 87 88 #ifndef MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH 89 #define MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH 0x02 90 #endif 91 92 #ifndef MPEG_OUTPUT_CLK_DRIVE_STRENGTH 93 #define MPEG_OUTPUT_CLK_DRIVE_STRENGTH 0x06 94 #endif 95 96 #ifndef OOB_CRX_DRIVE_STRENGTH 97 #define OOB_CRX_DRIVE_STRENGTH 0x02 98 #endif 99 100 #ifndef OOB_DRX_DRIVE_STRENGTH 101 #define OOB_DRX_DRIVE_STRENGTH 0x02 102 #endif 103 /*** START DJCOMBO patches to DRXJ registermap constants *********************/ 104 /*** registermap 200706071303 from drxj **************************************/ 105 #define ATV_TOP_CR_AMP_TH_FM 0x0 106 #define ATV_TOP_CR_AMP_TH_L 0xA 107 #define ATV_TOP_CR_AMP_TH_LP 0xA 108 #define ATV_TOP_CR_AMP_TH_BG 0x8 109 #define ATV_TOP_CR_AMP_TH_DK 0x8 110 #define ATV_TOP_CR_AMP_TH_I 0x8 111 #define ATV_TOP_CR_CONT_CR_D_MN 0x18 112 #define ATV_TOP_CR_CONT_CR_D_FM 0x0 113 #define ATV_TOP_CR_CONT_CR_D_L 0x20 114 #define ATV_TOP_CR_CONT_CR_D_LP 0x20 115 #define ATV_TOP_CR_CONT_CR_D_BG 0x18 116 #define ATV_TOP_CR_CONT_CR_D_DK 0x18 117 #define ATV_TOP_CR_CONT_CR_D_I 0x18 118 #define ATV_TOP_CR_CONT_CR_I_MN 0x80 119 #define ATV_TOP_CR_CONT_CR_I_FM 0x0 120 #define ATV_TOP_CR_CONT_CR_I_L 0x80 121 #define ATV_TOP_CR_CONT_CR_I_LP 0x80 122 #define ATV_TOP_CR_CONT_CR_I_BG 0x80 123 #define ATV_TOP_CR_CONT_CR_I_DK 0x80 124 #define ATV_TOP_CR_CONT_CR_I_I 0x80 125 #define ATV_TOP_CR_CONT_CR_P_MN 0x4 126 #define ATV_TOP_CR_CONT_CR_P_FM 0x0 127 #define ATV_TOP_CR_CONT_CR_P_L 0x4 128 #define ATV_TOP_CR_CONT_CR_P_LP 0x4 129 #define ATV_TOP_CR_CONT_CR_P_BG 0x4 130 #define ATV_TOP_CR_CONT_CR_P_DK 0x4 131 #define ATV_TOP_CR_CONT_CR_P_I 0x4 132 #define ATV_TOP_CR_OVM_TH_MN 0xA0 133 #define ATV_TOP_CR_OVM_TH_FM 0x0 134 #define ATV_TOP_CR_OVM_TH_L 0xA0 135 #define ATV_TOP_CR_OVM_TH_LP 0xA0 136 #define ATV_TOP_CR_OVM_TH_BG 0xA0 137 #define ATV_TOP_CR_OVM_TH_DK 0xA0 138 #define ATV_TOP_CR_OVM_TH_I 0xA0 139 #define ATV_TOP_EQU0_EQU_C0_FM 0x0 140 #define ATV_TOP_EQU0_EQU_C0_L 0x3 141 #define ATV_TOP_EQU0_EQU_C0_LP 0x3 142 #define ATV_TOP_EQU0_EQU_C0_BG 0x7 143 #define ATV_TOP_EQU0_EQU_C0_DK 0x0 144 #define ATV_TOP_EQU0_EQU_C0_I 0x3 145 #define ATV_TOP_EQU1_EQU_C1_FM 0x0 146 #define ATV_TOP_EQU1_EQU_C1_L 0x1F6 147 #define ATV_TOP_EQU1_EQU_C1_LP 0x1F6 148 #define ATV_TOP_EQU1_EQU_C1_BG 0x197 149 #define ATV_TOP_EQU1_EQU_C1_DK 0x198 150 #define ATV_TOP_EQU1_EQU_C1_I 0x1F6 151 #define ATV_TOP_EQU2_EQU_C2_FM 0x0 152 #define ATV_TOP_EQU2_EQU_C2_L 0x28 153 #define ATV_TOP_EQU2_EQU_C2_LP 0x28 154 #define ATV_TOP_EQU2_EQU_C2_BG 0xC5 155 #define ATV_TOP_EQU2_EQU_C2_DK 0xB0 156 #define ATV_TOP_EQU2_EQU_C2_I 0x28 157 #define ATV_TOP_EQU3_EQU_C3_FM 0x0 158 #define ATV_TOP_EQU3_EQU_C3_L 0x192 159 #define ATV_TOP_EQU3_EQU_C3_LP 0x192 160 #define ATV_TOP_EQU3_EQU_C3_BG 0x12E 161 #define ATV_TOP_EQU3_EQU_C3_DK 0x18E 162 #define ATV_TOP_EQU3_EQU_C3_I 0x192 163 #define ATV_TOP_STD_MODE_MN 0x0 164 #define ATV_TOP_STD_MODE_FM 0x1 165 #define ATV_TOP_STD_MODE_L 0x0 166 #define ATV_TOP_STD_MODE_LP 0x0 167 #define ATV_TOP_STD_MODE_BG 0x0 168 #define ATV_TOP_STD_MODE_DK 0x0 169 #define ATV_TOP_STD_MODE_I 0x0 170 #define ATV_TOP_STD_VID_POL_MN 0x0 171 #define ATV_TOP_STD_VID_POL_FM 0x0 172 #define ATV_TOP_STD_VID_POL_L 0x2 173 #define ATV_TOP_STD_VID_POL_LP 0x2 174 #define ATV_TOP_STD_VID_POL_BG 0x0 175 #define ATV_TOP_STD_VID_POL_DK 0x0 176 #define ATV_TOP_STD_VID_POL_I 0x0 177 #define ATV_TOP_VID_AMP_MN 0x380 178 #define ATV_TOP_VID_AMP_FM 0x0 179 #define ATV_TOP_VID_AMP_L 0xF50 180 #define ATV_TOP_VID_AMP_LP 0xF50 181 #define ATV_TOP_VID_AMP_BG 0x380 182 #define ATV_TOP_VID_AMP_DK 0x394 183 #define ATV_TOP_VID_AMP_I 0x3D8 184 #define IQM_CF_OUT_ENA_OFDM__M 0x4 185 #define IQM_FS_ADJ_SEL_B_QAM 0x1 186 #define IQM_FS_ADJ_SEL_B_OFF 0x0 187 #define IQM_FS_ADJ_SEL_B_VSB 0x2 188 #define IQM_RC_ADJ_SEL_B_OFF 0x0 189 #define IQM_RC_ADJ_SEL_B_QAM 0x1 190 #define IQM_RC_ADJ_SEL_B_VSB 0x2 191 /*** END DJCOMBO patches to DRXJ registermap *********************************/ 192 193 #include "drx_driver_version.h" 194 195 /* #define DRX_DEBUG */ 196 #ifdef DRX_DEBUG 197 #include <stdio.h> 198 #endif 199 200 /*----------------------------------------------------------------------------- 201 ENUMS 202 ----------------------------------------------------------------------------*/ 203 204 /*----------------------------------------------------------------------------- 205 DEFINES 206 ----------------------------------------------------------------------------*/ 207 #ifndef DRXJ_WAKE_UP_KEY 208 #define DRXJ_WAKE_UP_KEY (demod->my_i2c_dev_addr->i2c_addr) 209 #endif 210 211 /* 212 * \def DRXJ_DEF_I2C_ADDR 213 * \brief Default I2C address of a demodulator instance. 214 */ 215 #define DRXJ_DEF_I2C_ADDR (0x52) 216 217 /* 218 * \def DRXJ_DEF_DEMOD_DEV_ID 219 * \brief Default device identifier of a demodultor instance. 220 */ 221 #define DRXJ_DEF_DEMOD_DEV_ID (1) 222 223 /* 224 * \def DRXJ_SCAN_TIMEOUT 225 * \brief Timeout value for waiting on demod lock during channel scan (millisec). 226 */ 227 #define DRXJ_SCAN_TIMEOUT 1000 228 229 /* 230 * \def HI_I2C_DELAY 231 * \brief HI timing delay for I2C timing (in nano seconds) 232 * 233 * Used to compute HI_CFG_DIV 234 */ 235 #define HI_I2C_DELAY 42 236 237 /* 238 * \def HI_I2C_BRIDGE_DELAY 239 * \brief HI timing delay for I2C timing (in nano seconds) 240 * 241 * Used to compute HI_CFG_BDL 242 */ 243 #define HI_I2C_BRIDGE_DELAY 750 244 245 /* 246 * \brief Time Window for MER and SER Measurement in Units of Segment duration. 247 */ 248 #define VSB_TOP_MEASUREMENT_PERIOD 64 249 #define SYMBOLS_PER_SEGMENT 832 250 251 /* 252 * \brief bit rate and segment rate constants used for SER and BER. 253 */ 254 /* values taken from the QAM microcode */ 255 #define DRXJ_QAM_SL_SIG_POWER_QAM_UNKNOWN 0 256 #define DRXJ_QAM_SL_SIG_POWER_QPSK 32768 257 #define DRXJ_QAM_SL_SIG_POWER_QAM8 24576 258 #define DRXJ_QAM_SL_SIG_POWER_QAM16 40960 259 #define DRXJ_QAM_SL_SIG_POWER_QAM32 20480 260 #define DRXJ_QAM_SL_SIG_POWER_QAM64 43008 261 #define DRXJ_QAM_SL_SIG_POWER_QAM128 20992 262 #define DRXJ_QAM_SL_SIG_POWER_QAM256 43520 263 /* 264 * \brief Min supported symbolrates. 265 */ 266 #ifndef DRXJ_QAM_SYMBOLRATE_MIN 267 #define DRXJ_QAM_SYMBOLRATE_MIN (520000) 268 #endif 269 270 /* 271 * \brief Max supported symbolrates. 272 */ 273 #ifndef DRXJ_QAM_SYMBOLRATE_MAX 274 #define DRXJ_QAM_SYMBOLRATE_MAX (7233000) 275 #endif 276 277 /* 278 * \def DRXJ_QAM_MAX_WAITTIME 279 * \brief Maximal wait time for QAM auto constellation in ms 280 */ 281 #ifndef DRXJ_QAM_MAX_WAITTIME 282 #define DRXJ_QAM_MAX_WAITTIME 900 283 #endif 284 285 #ifndef DRXJ_QAM_FEC_LOCK_WAITTIME 286 #define DRXJ_QAM_FEC_LOCK_WAITTIME 150 287 #endif 288 289 #ifndef DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 290 #define DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME 200 291 #endif 292 293 /* 294 * \def SCU status and results 295 * \brief SCU 296 */ 297 #define DRX_SCU_READY 0 298 #define DRXJ_MAX_WAITTIME 100 /* ms */ 299 #define FEC_RS_MEASUREMENT_PERIOD 12894 /* 1 sec */ 300 #define FEC_RS_MEASUREMENT_PRESCALE 1 /* n sec */ 301 302 /* 303 * \def DRX_AUD_MAX_DEVIATION 304 * \brief Needed for calculation of prescale feature in AUD 305 */ 306 #ifndef DRXJ_AUD_MAX_FM_DEVIATION 307 #define DRXJ_AUD_MAX_FM_DEVIATION 100 /* kHz */ 308 #endif 309 310 /* 311 * \brief Needed for calculation of NICAM prescale feature in AUD 312 */ 313 #ifndef DRXJ_AUD_MAX_NICAM_PRESCALE 314 #define DRXJ_AUD_MAX_NICAM_PRESCALE (9) /* dB */ 315 #endif 316 317 /* 318 * \brief Needed for calculation of NICAM prescale feature in AUD 319 */ 320 #ifndef DRXJ_AUD_MAX_WAITTIME 321 #define DRXJ_AUD_MAX_WAITTIME 250 /* ms */ 322 #endif 323 324 /* ATV config changed flags */ 325 #define DRXJ_ATV_CHANGED_COEF (0x00000001UL) 326 #define DRXJ_ATV_CHANGED_PEAK_FLT (0x00000008UL) 327 #define DRXJ_ATV_CHANGED_NOISE_FLT (0x00000010UL) 328 #define DRXJ_ATV_CHANGED_OUTPUT (0x00000020UL) 329 #define DRXJ_ATV_CHANGED_SIF_ATT (0x00000040UL) 330 331 /* UIO define */ 332 #define DRX_UIO_MODE_FIRMWARE_SMA DRX_UIO_MODE_FIRMWARE0 333 #define DRX_UIO_MODE_FIRMWARE_SAW DRX_UIO_MODE_FIRMWARE1 334 335 /* 336 * MICROCODE RELATED DEFINES 337 */ 338 339 /* Magic word for checking correct Endianness of microcode data */ 340 #define DRX_UCODE_MAGIC_WORD ((((u16)'H')<<8)+((u16)'L')) 341 342 /* CRC flag in ucode header, flags field. */ 343 #define DRX_UCODE_CRC_FLAG (0x0001) 344 345 /* 346 * Maximum size of buffer used to verify the microcode. 347 * Must be an even number 348 */ 349 #define DRX_UCODE_MAX_BUF_SIZE (DRXDAP_MAX_RCHUNKSIZE) 350 351 #if DRX_UCODE_MAX_BUF_SIZE & 1 352 #error DRX_UCODE_MAX_BUF_SIZE must be an even number 353 #endif 354 355 /* 356 * Power mode macros 357 */ 358 359 #define DRX_ISPOWERDOWNMODE(mode) ((mode == DRX_POWER_MODE_9) || \ 360 (mode == DRX_POWER_MODE_10) || \ 361 (mode == DRX_POWER_MODE_11) || \ 362 (mode == DRX_POWER_MODE_12) || \ 363 (mode == DRX_POWER_MODE_13) || \ 364 (mode == DRX_POWER_MODE_14) || \ 365 (mode == DRX_POWER_MODE_15) || \ 366 (mode == DRX_POWER_MODE_16) || \ 367 (mode == DRX_POWER_DOWN)) 368 369 /* Pin safe mode macro */ 370 #define DRXJ_PIN_SAFE_MODE 0x0000 371 /*============================================================================*/ 372 /*=== GLOBAL VARIABLEs =======================================================*/ 373 /*============================================================================*/ 374 /* 375 */ 376 377 /* 378 * \brief Temporary register definitions. 379 * (register definitions that are not yet available in register master) 380 */ 381 382 /*****************************************************************************/ 383 /* Audio block 0x103 is write only. To avoid shadowing in driver accessing */ 384 /* RAM addresses directly. This must be READ ONLY to avoid problems. */ 385 /* Writing to the interface addresses are more than only writing the RAM */ 386 /* locations */ 387 /*****************************************************************************/ 388 /* 389 * \brief RAM location of MODUS registers 390 */ 391 #define AUD_DEM_RAM_MODUS_HI__A 0x10204A3 392 #define AUD_DEM_RAM_MODUS_HI__M 0xF000 393 394 #define AUD_DEM_RAM_MODUS_LO__A 0x10204A4 395 #define AUD_DEM_RAM_MODUS_LO__M 0x0FFF 396 397 /* 398 * \brief RAM location of I2S config registers 399 */ 400 #define AUD_DEM_RAM_I2S_CONFIG1__A 0x10204B1 401 #define AUD_DEM_RAM_I2S_CONFIG2__A 0x10204B2 402 403 /* 404 * \brief RAM location of DCO config registers 405 */ 406 #define AUD_DEM_RAM_DCO_B_HI__A 0x1020461 407 #define AUD_DEM_RAM_DCO_B_LO__A 0x1020462 408 #define AUD_DEM_RAM_DCO_A_HI__A 0x1020463 409 #define AUD_DEM_RAM_DCO_A_LO__A 0x1020464 410 411 /* 412 * \brief RAM location of Threshold registers 413 */ 414 #define AUD_DEM_RAM_NICAM_THRSHLD__A 0x102045A 415 #define AUD_DEM_RAM_A2_THRSHLD__A 0x10204BB 416 #define AUD_DEM_RAM_BTSC_THRSHLD__A 0x10204A6 417 418 /* 419 * \brief RAM location of Carrier Threshold registers 420 */ 421 #define AUD_DEM_RAM_CM_A_THRSHLD__A 0x10204AF 422 #define AUD_DEM_RAM_CM_B_THRSHLD__A 0x10204B0 423 424 /* 425 * \brief FM Matrix register fix 426 */ 427 #ifdef AUD_DEM_WR_FM_MATRIX__A 428 #undef AUD_DEM_WR_FM_MATRIX__A 429 #endif 430 #define AUD_DEM_WR_FM_MATRIX__A 0x105006F 431 432 /*============================================================================*/ 433 /* 434 * \brief Defines required for audio 435 */ 436 #define AUD_VOLUME_ZERO_DB 115 437 #define AUD_VOLUME_DB_MIN -60 438 #define AUD_VOLUME_DB_MAX 12 439 #define AUD_CARRIER_STRENGTH_QP_0DB 0x4000 440 #define AUD_CARRIER_STRENGTH_QP_0DB_LOG10T100 421 441 #define AUD_MAX_AVC_REF_LEVEL 15 442 #define AUD_I2S_FREQUENCY_MAX 48000UL 443 #define AUD_I2S_FREQUENCY_MIN 12000UL 444 #define AUD_RDS_ARRAY_SIZE 18 445 446 /* 447 * \brief Needed for calculation of prescale feature in AUD 448 */ 449 #ifndef DRX_AUD_MAX_FM_DEVIATION 450 #define DRX_AUD_MAX_FM_DEVIATION (100) /* kHz */ 451 #endif 452 453 /* 454 * \brief Needed for calculation of NICAM prescale feature in AUD 455 */ 456 #ifndef DRX_AUD_MAX_NICAM_PRESCALE 457 #define DRX_AUD_MAX_NICAM_PRESCALE (9) /* dB */ 458 #endif 459 460 /*============================================================================*/ 461 /* Values for I2S Master/Slave pin configurations */ 462 #define SIO_PDR_I2S_CL_CFG_MODE__MASTER 0x0004 463 #define SIO_PDR_I2S_CL_CFG_DRIVE__MASTER 0x0008 464 #define SIO_PDR_I2S_CL_CFG_MODE__SLAVE 0x0004 465 #define SIO_PDR_I2S_CL_CFG_DRIVE__SLAVE 0x0000 466 467 #define SIO_PDR_I2S_DA_CFG_MODE__MASTER 0x0003 468 #define SIO_PDR_I2S_DA_CFG_DRIVE__MASTER 0x0008 469 #define SIO_PDR_I2S_DA_CFG_MODE__SLAVE 0x0003 470 #define SIO_PDR_I2S_DA_CFG_DRIVE__SLAVE 0x0008 471 472 #define SIO_PDR_I2S_WS_CFG_MODE__MASTER 0x0004 473 #define SIO_PDR_I2S_WS_CFG_DRIVE__MASTER 0x0008 474 #define SIO_PDR_I2S_WS_CFG_MODE__SLAVE 0x0004 475 #define SIO_PDR_I2S_WS_CFG_DRIVE__SLAVE 0x0000 476 477 /*============================================================================*/ 478 /*=== REGISTER ACCESS MACROS =================================================*/ 479 /*============================================================================*/ 480 481 /* 482 * This macro is used to create byte arrays for block writes. 483 * Block writes speed up I2C traffic between host and demod. 484 * The macro takes care of the required byte order in a 16 bits word. 485 * x -> lowbyte(x), highbyte(x) 486 */ 487 #define DRXJ_16TO8(x) ((u8) (((u16)x) & 0xFF)), \ 488 ((u8)((((u16)x)>>8)&0xFF)) 489 /* 490 * This macro is used to convert byte array to 16 bit register value for block read. 491 * Block read speed up I2C traffic between host and demod. 492 * The macro takes care of the required byte order in a 16 bits word. 493 */ 494 #define DRXJ_8TO16(x) ((u16) (x[0] | (x[1] << 8))) 495 496 /*============================================================================*/ 497 /*=== MISC DEFINES ===========================================================*/ 498 /*============================================================================*/ 499 500 /*============================================================================*/ 501 /*=== HI COMMAND RELATED DEFINES =============================================*/ 502 /*============================================================================*/ 503 504 /* 505 * \brief General maximum number of retries for ucode command interfaces 506 */ 507 #define DRXJ_MAX_RETRIES (100) 508 509 /*============================================================================*/ 510 /*=== STANDARD RELATED MACROS ================================================*/ 511 /*============================================================================*/ 512 513 #define DRXJ_ISATVSTD(std) ((std == DRX_STANDARD_PAL_SECAM_BG) || \ 514 (std == DRX_STANDARD_PAL_SECAM_DK) || \ 515 (std == DRX_STANDARD_PAL_SECAM_I) || \ 516 (std == DRX_STANDARD_PAL_SECAM_L) || \ 517 (std == DRX_STANDARD_PAL_SECAM_LP) || \ 518 (std == DRX_STANDARD_NTSC) || \ 519 (std == DRX_STANDARD_FM)) 520 521 #define DRXJ_ISQAMSTD(std) ((std == DRX_STANDARD_ITU_A) || \ 522 (std == DRX_STANDARD_ITU_B) || \ 523 (std == DRX_STANDARD_ITU_C) || \ 524 (std == DRX_STANDARD_ITU_D)) 525 526 /*----------------------------------------------------------------------------- 527 GLOBAL VARIABLES 528 ----------------------------------------------------------------------------*/ 529 /* 530 * DRXJ DAP structures 531 */ 532 533 static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr, 534 u32 addr, 535 u16 datasize, 536 u8 *data, u32 flags); 537 538 539 static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr, 540 u32 waddr, 541 u32 raddr, 542 u16 wdata, u16 *rdata); 543 544 static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr, 545 u32 addr, 546 u16 *data, u32 flags); 547 548 static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr, 549 u32 addr, 550 u32 *data, u32 flags); 551 552 static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr, 553 u32 addr, 554 u16 datasize, 555 u8 *data, u32 flags); 556 557 static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr, 558 u32 addr, 559 u16 data, u32 flags); 560 561 static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr, 562 u32 addr, 563 u32 data, u32 flags); 564 565 static struct drxj_data drxj_data_g = { 566 false, /* has_lna : true if LNA (aka PGA) present */ 567 false, /* has_oob : true if OOB supported */ 568 false, /* has_ntsc: true if NTSC supported */ 569 false, /* has_btsc: true if BTSC supported */ 570 false, /* has_smatx: true if SMA_TX pin is available */ 571 false, /* has_smarx: true if SMA_RX pin is available */ 572 false, /* has_gpio : true if GPIO pin is available */ 573 false, /* has_irqn : true if IRQN pin is available */ 574 0, /* mfx A1/A2/A... */ 575 576 /* tuner settings */ 577 false, /* tuner mirrors RF signal */ 578 /* standard/channel settings */ 579 DRX_STANDARD_UNKNOWN, /* current standard */ 580 DRX_CONSTELLATION_AUTO, /* constellation */ 581 0, /* frequency in KHz */ 582 DRX_BANDWIDTH_UNKNOWN, /* curr_bandwidth */ 583 DRX_MIRROR_NO, /* mirror */ 584 585 /* signal quality information: */ 586 /* default values taken from the QAM Programming guide */ 587 /* fec_bits_desired should not be less than 4000000 */ 588 4000000, /* fec_bits_desired */ 589 5, /* fec_vd_plen */ 590 4, /* qam_vd_prescale */ 591 0xFFFF, /* qamVDPeriod */ 592 204 * 8, /* fec_rs_plen annex A */ 593 1, /* fec_rs_prescale */ 594 FEC_RS_MEASUREMENT_PERIOD, /* fec_rs_period */ 595 true, /* reset_pkt_err_acc */ 596 0, /* pkt_err_acc_start */ 597 598 /* HI configuration */ 599 0, /* hi_cfg_timing_div */ 600 0, /* hi_cfg_bridge_delay */ 601 0, /* hi_cfg_wake_up_key */ 602 0, /* hi_cfg_ctrl */ 603 0, /* HICfgTimeout */ 604 /* UIO configuration */ 605 DRX_UIO_MODE_DISABLE, /* uio_sma_rx_mode */ 606 DRX_UIO_MODE_DISABLE, /* uio_sma_tx_mode */ 607 DRX_UIO_MODE_DISABLE, /* uioASELMode */ 608 DRX_UIO_MODE_DISABLE, /* uio_irqn_mode */ 609 /* FS setting */ 610 0UL, /* iqm_fs_rate_ofs */ 611 false, /* pos_image */ 612 /* RC setting */ 613 0UL, /* iqm_rc_rate_ofs */ 614 /* AUD information */ 615 /* false, * flagSetAUDdone */ 616 /* false, * detectedRDS */ 617 /* true, * flagASDRequest */ 618 /* false, * flagHDevClear */ 619 /* false, * flagHDevSet */ 620 /* (u16) 0xFFF, * rdsLastCount */ 621 622 /* ATV configuration */ 623 0UL, /* flags cfg changes */ 624 /* shadow of ATV_TOP_EQU0__A */ 625 {-5, 626 ATV_TOP_EQU0_EQU_C0_FM, 627 ATV_TOP_EQU0_EQU_C0_L, 628 ATV_TOP_EQU0_EQU_C0_LP, 629 ATV_TOP_EQU0_EQU_C0_BG, 630 ATV_TOP_EQU0_EQU_C0_DK, 631 ATV_TOP_EQU0_EQU_C0_I}, 632 /* shadow of ATV_TOP_EQU1__A */ 633 {-50, 634 ATV_TOP_EQU1_EQU_C1_FM, 635 ATV_TOP_EQU1_EQU_C1_L, 636 ATV_TOP_EQU1_EQU_C1_LP, 637 ATV_TOP_EQU1_EQU_C1_BG, 638 ATV_TOP_EQU1_EQU_C1_DK, 639 ATV_TOP_EQU1_EQU_C1_I}, 640 /* shadow of ATV_TOP_EQU2__A */ 641 {210, 642 ATV_TOP_EQU2_EQU_C2_FM, 643 ATV_TOP_EQU2_EQU_C2_L, 644 ATV_TOP_EQU2_EQU_C2_LP, 645 ATV_TOP_EQU2_EQU_C2_BG, 646 ATV_TOP_EQU2_EQU_C2_DK, 647 ATV_TOP_EQU2_EQU_C2_I}, 648 /* shadow of ATV_TOP_EQU3__A */ 649 {-160, 650 ATV_TOP_EQU3_EQU_C3_FM, 651 ATV_TOP_EQU3_EQU_C3_L, 652 ATV_TOP_EQU3_EQU_C3_LP, 653 ATV_TOP_EQU3_EQU_C3_BG, 654 ATV_TOP_EQU3_EQU_C3_DK, 655 ATV_TOP_EQU3_EQU_C3_I}, 656 false, /* flag: true=bypass */ 657 ATV_TOP_VID_PEAK__PRE, /* shadow of ATV_TOP_VID_PEAK__A */ 658 ATV_TOP_NOISE_TH__PRE, /* shadow of ATV_TOP_NOISE_TH__A */ 659 true, /* flag CVBS output enable */ 660 false, /* flag SIF output enable */ 661 DRXJ_SIF_ATTENUATION_0DB, /* current SIF att setting */ 662 { /* qam_rf_agc_cfg */ 663 DRX_STANDARD_ITU_B, /* standard */ 664 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 665 0, /* output_level */ 666 0, /* min_output_level */ 667 0xFFFF, /* max_output_level */ 668 0x0000, /* speed */ 669 0x0000, /* top */ 670 0x0000 /* c.o.c. */ 671 }, 672 { /* qam_if_agc_cfg */ 673 DRX_STANDARD_ITU_B, /* standard */ 674 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 675 0, /* output_level */ 676 0, /* min_output_level */ 677 0xFFFF, /* max_output_level */ 678 0x0000, /* speed */ 679 0x0000, /* top (don't care) */ 680 0x0000 /* c.o.c. (don't care) */ 681 }, 682 { /* vsb_rf_agc_cfg */ 683 DRX_STANDARD_8VSB, /* standard */ 684 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 685 0, /* output_level */ 686 0, /* min_output_level */ 687 0xFFFF, /* max_output_level */ 688 0x0000, /* speed */ 689 0x0000, /* top (don't care) */ 690 0x0000 /* c.o.c. (don't care) */ 691 }, 692 { /* vsb_if_agc_cfg */ 693 DRX_STANDARD_8VSB, /* standard */ 694 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 695 0, /* output_level */ 696 0, /* min_output_level */ 697 0xFFFF, /* max_output_level */ 698 0x0000, /* speed */ 699 0x0000, /* top (don't care) */ 700 0x0000 /* c.o.c. (don't care) */ 701 }, 702 0, /* qam_pga_cfg */ 703 0, /* vsb_pga_cfg */ 704 { /* qam_pre_saw_cfg */ 705 DRX_STANDARD_ITU_B, /* standard */ 706 0, /* reference */ 707 false /* use_pre_saw */ 708 }, 709 { /* vsb_pre_saw_cfg */ 710 DRX_STANDARD_8VSB, /* standard */ 711 0, /* reference */ 712 false /* use_pre_saw */ 713 }, 714 715 /* Version information */ 716 #ifndef _CH_ 717 { 718 "01234567890", /* human readable version microcode */ 719 "01234567890" /* human readable version device specific code */ 720 }, 721 { 722 { /* struct drx_version for microcode */ 723 DRX_MODULE_UNKNOWN, 724 (char *)(NULL), 725 0, 726 0, 727 0, 728 (char *)(NULL) 729 }, 730 { /* struct drx_version for device specific code */ 731 DRX_MODULE_UNKNOWN, 732 (char *)(NULL), 733 0, 734 0, 735 0, 736 (char *)(NULL) 737 } 738 }, 739 { 740 { /* struct drx_version_list for microcode */ 741 (struct drx_version *) (NULL), 742 (struct drx_version_list *) (NULL) 743 }, 744 { /* struct drx_version_list for device specific code */ 745 (struct drx_version *) (NULL), 746 (struct drx_version_list *) (NULL) 747 } 748 }, 749 #endif 750 false, /* smart_ant_inverted */ 751 /* Tracking filter setting for OOB */ 752 { 753 12000, 754 9300, 755 6600, 756 5280, 757 3700, 758 3000, 759 2000, 760 0}, 761 false, /* oob_power_on */ 762 0, /* mpeg_ts_static_bitrate */ 763 false, /* disable_te_ihandling */ 764 false, /* bit_reverse_mpeg_outout */ 765 DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO, /* mpeg_output_clock_rate */ 766 DRXJ_MPEG_START_WIDTH_1CLKCYC, /* mpeg_start_width */ 767 768 /* Pre SAW & Agc configuration for ATV */ 769 { 770 DRX_STANDARD_NTSC, /* standard */ 771 7, /* reference */ 772 true /* use_pre_saw */ 773 }, 774 { /* ATV RF-AGC */ 775 DRX_STANDARD_NTSC, /* standard */ 776 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 777 0, /* output_level */ 778 0, /* min_output_level (d.c.) */ 779 0, /* max_output_level (d.c.) */ 780 3, /* speed */ 781 9500, /* top */ 782 4000 /* cut-off current */ 783 }, 784 { /* ATV IF-AGC */ 785 DRX_STANDARD_NTSC, /* standard */ 786 DRX_AGC_CTRL_AUTO, /* ctrl_mode */ 787 0, /* output_level */ 788 0, /* min_output_level (d.c.) */ 789 0, /* max_output_level (d.c.) */ 790 3, /* speed */ 791 2400, /* top */ 792 0 /* c.o.c. (d.c.) */ 793 }, 794 140, /* ATV PGA config */ 795 0, /* curr_symbol_rate */ 796 797 false, /* pdr_safe_mode */ 798 SIO_PDR_GPIO_CFG__PRE, /* pdr_safe_restore_val_gpio */ 799 SIO_PDR_VSYNC_CFG__PRE, /* pdr_safe_restore_val_v_sync */ 800 SIO_PDR_SMA_RX_CFG__PRE, /* pdr_safe_restore_val_sma_rx */ 801 SIO_PDR_SMA_TX_CFG__PRE, /* pdr_safe_restore_val_sma_tx */ 802 803 4, /* oob_pre_saw */ 804 DRXJ_OOB_LO_POW_MINUS10DB, /* oob_lo_pow */ 805 { 806 false /* aud_data, only first member */ 807 }, 808 }; 809 810 /* 811 * \var drxj_default_addr_g 812 * \brief Default I2C address and device identifier. 813 */ 814 static struct i2c_device_addr drxj_default_addr_g = { 815 DRXJ_DEF_I2C_ADDR, /* i2c address */ 816 DRXJ_DEF_DEMOD_DEV_ID /* device id */ 817 }; 818 819 /* 820 * \var drxj_default_comm_attr_g 821 * \brief Default common attributes of a drxj demodulator instance. 822 */ 823 static struct drx_common_attr drxj_default_comm_attr_g = { 824 NULL, /* ucode file */ 825 true, /* ucode verify switch */ 826 {0}, /* version record */ 827 828 44000, /* IF in kHz in case no tuner instance is used */ 829 (151875 - 0), /* system clock frequency in kHz */ 830 0, /* oscillator frequency kHz */ 831 0, /* oscillator deviation in ppm, signed */ 832 false, /* If true mirror frequency spectrum */ 833 { 834 /* MPEG output configuration */ 835 true, /* If true, enable MPEG output */ 836 false, /* If true, insert RS byte */ 837 false, /* If true, parallel out otherwise serial */ 838 false, /* If true, invert DATA signals */ 839 false, /* If true, invert ERR signal */ 840 false, /* If true, invert STR signals */ 841 false, /* If true, invert VAL signals */ 842 false, /* If true, invert CLK signals */ 843 true, /* If true, static MPEG clockrate will 844 be used, otherwise clockrate will 845 adapt to the bitrate of the TS */ 846 19392658UL, /* Maximum bitrate in b/s in case 847 static clockrate is selected */ 848 DRX_MPEG_STR_WIDTH_1 /* MPEG Start width in clock cycles */ 849 }, 850 /* Initilisations below can be omitted, they require no user input and 851 are initially 0, NULL or false. The compiler will initialize them to these 852 values when omitted. */ 853 false, /* is_opened */ 854 855 /* SCAN */ 856 NULL, /* no scan params yet */ 857 0, /* current scan index */ 858 0, /* next scan frequency */ 859 false, /* scan ready flag */ 860 0, /* max channels to scan */ 861 0, /* nr of channels scanned */ 862 NULL, /* default scan function */ 863 NULL, /* default context pointer */ 864 0, /* millisec to wait for demod lock */ 865 DRXJ_DEMOD_LOCK, /* desired lock */ 866 false, 867 868 /* Power management */ 869 DRX_POWER_UP, 870 871 /* Tuner */ 872 1, /* nr of I2C port to which tuner is */ 873 0L, /* minimum RF input frequency, in kHz */ 874 0L, /* maximum RF input frequency, in kHz */ 875 false, /* Rf Agc Polarity */ 876 false, /* If Agc Polarity */ 877 false, /* tuner slow mode */ 878 879 { /* current channel (all 0) */ 880 0UL /* channel.frequency */ 881 }, 882 DRX_STANDARD_UNKNOWN, /* current standard */ 883 DRX_STANDARD_UNKNOWN, /* previous standard */ 884 DRX_STANDARD_UNKNOWN, /* di_cache_standard */ 885 false, /* use_bootloader */ 886 0UL, /* capabilities */ 887 0 /* mfx */ 888 }; 889 890 /* 891 * \var drxj_default_demod_g 892 * \brief Default drxj demodulator instance. 893 */ 894 static struct drx_demod_instance drxj_default_demod_g = { 895 &drxj_default_addr_g, /* i2c address & device id */ 896 &drxj_default_comm_attr_g, /* demod common attributes */ 897 &drxj_data_g /* demod device specific attributes */ 898 }; 899 900 /* 901 * \brief Default audio data structure for DRK demodulator instance. 902 * 903 * This structure is DRXK specific. 904 * 905 */ 906 static struct drx_aud_data drxj_default_aud_data_g = { 907 false, /* audio_is_active */ 908 DRX_AUD_STANDARD_AUTO, /* audio_standard */ 909 910 /* i2sdata */ 911 { 912 false, /* output_enable */ 913 48000, /* frequency */ 914 DRX_I2S_MODE_MASTER, /* mode */ 915 DRX_I2S_WORDLENGTH_32, /* word_length */ 916 DRX_I2S_POLARITY_RIGHT, /* polarity */ 917 DRX_I2S_FORMAT_WS_WITH_DATA /* format */ 918 }, 919 /* volume */ 920 { 921 true, /* mute; */ 922 0, /* volume */ 923 DRX_AUD_AVC_OFF, /* avc_mode */ 924 0, /* avc_ref_level */ 925 DRX_AUD_AVC_MAX_GAIN_12DB, /* avc_max_gain */ 926 DRX_AUD_AVC_MAX_ATTEN_24DB, /* avc_max_atten */ 927 0, /* strength_left */ 928 0 /* strength_right */ 929 }, 930 DRX_AUD_AUTO_SOUND_SELECT_ON_CHANGE_ON, /* auto_sound */ 931 /* ass_thresholds */ 932 { 933 440, /* A2 */ 934 12, /* BTSC */ 935 700, /* NICAM */ 936 }, 937 /* carrier */ 938 { 939 /* a */ 940 { 941 42, /* thres */ 942 DRX_NO_CARRIER_NOISE, /* opt */ 943 0, /* shift */ 944 0 /* dco */ 945 }, 946 /* b */ 947 { 948 42, /* thres */ 949 DRX_NO_CARRIER_MUTE, /* opt */ 950 0, /* shift */ 951 0 /* dco */ 952 }, 953 954 }, 955 /* mixer */ 956 { 957 DRX_AUD_SRC_STEREO_OR_A, /* source_i2s */ 958 DRX_AUD_I2S_MATRIX_STEREO, /* matrix_i2s */ 959 DRX_AUD_FM_MATRIX_SOUND_A /* matrix_fm */ 960 }, 961 DRX_AUD_DEVIATION_NORMAL, /* deviation */ 962 DRX_AUD_AVSYNC_OFF, /* av_sync */ 963 964 /* prescale */ 965 { 966 DRX_AUD_MAX_FM_DEVIATION, /* fm_deviation */ 967 DRX_AUD_MAX_NICAM_PRESCALE /* nicam_gain */ 968 }, 969 DRX_AUD_FM_DEEMPH_75US, /* deemph */ 970 DRX_BTSC_STEREO, /* btsc_detect */ 971 0, /* rds_data_counter */ 972 false /* rds_data_present */ 973 }; 974 975 /*----------------------------------------------------------------------------- 976 STRUCTURES 977 ----------------------------------------------------------------------------*/ 978 struct drxjeq_stat { 979 u16 eq_mse; 980 u8 eq_mode; 981 u8 eq_ctrl; 982 u8 eq_stat; 983 }; 984 985 /* HI command */ 986 struct drxj_hi_cmd { 987 u16 cmd; 988 u16 param1; 989 u16 param2; 990 u16 param3; 991 u16 param4; 992 u16 param5; 993 u16 param6; 994 }; 995 996 /*============================================================================*/ 997 /*=== MICROCODE RELATED STRUCTURES ===========================================*/ 998 /*============================================================================*/ 999 1000 /* 1001 * struct drxu_code_block_hdr - Structure of the microcode block headers 1002 * 1003 * @addr: Destination address of the data in this block 1004 * @size: Size of the block data following this header counted in 1005 * 16 bits words 1006 * @CRC: CRC value of the data block, only valid if CRC flag is 1007 * set. 1008 */ 1009 struct drxu_code_block_hdr { 1010 u32 addr; 1011 u16 size; 1012 u16 flags; 1013 u16 CRC; 1014 }; 1015 1016 /*----------------------------------------------------------------------------- 1017 FUNCTIONS 1018 ----------------------------------------------------------------------------*/ 1019 /* Some prototypes */ 1020 static int 1021 hi_command(struct i2c_device_addr *dev_addr, 1022 const struct drxj_hi_cmd *cmd, u16 *result); 1023 1024 static int 1025 ctrl_lock_status(struct drx_demod_instance *demod, enum drx_lock_status *lock_stat); 1026 1027 static int 1028 ctrl_power_mode(struct drx_demod_instance *demod, enum drx_power_mode *mode); 1029 1030 static int power_down_aud(struct drx_demod_instance *demod); 1031 1032 static int 1033 ctrl_set_cfg_pre_saw(struct drx_demod_instance *demod, struct drxj_cfg_pre_saw *pre_saw); 1034 1035 static int 1036 ctrl_set_cfg_afe_gain(struct drx_demod_instance *demod, struct drxj_cfg_afe_gain *afe_gain); 1037 1038 /*============================================================================*/ 1039 /*============================================================================*/ 1040 /*== HELPER FUNCTIONS ==*/ 1041 /*============================================================================*/ 1042 /*============================================================================*/ 1043 1044 1045 /*============================================================================*/ 1046 1047 /* 1048 * \fn u32 frac28(u32 N, u32 D) 1049 * \brief Compute: (1<<28)*N/D 1050 * \param N 32 bits 1051 * \param D 32 bits 1052 * \return (1<<28)*N/D 1053 * This function is used to avoid floating-point calculations as they may 1054 * not be present on the target platform. 1055 1056 * frac28 performs an unsigned 28/28 bits division to 32-bit fixed point 1057 * fraction used for setting the Frequency Shifter registers. 1058 * N and D can hold numbers up to width: 28-bits. 1059 * The 4 bits integer part and the 28 bits fractional part are calculated. 1060 1061 * Usage condition: ((1<<28)*n)/d < ((1<<32)-1) => (n/d) < 15.999 1062 1063 * N: 0...(1<<28)-1 = 268435454 1064 * D: 0...(1<<28)-1 1065 * Q: 0...(1<<32)-1 1066 */ 1067 static u32 frac28(u32 N, u32 D) 1068 { 1069 int i = 0; 1070 u32 Q1 = 0; 1071 u32 R0 = 0; 1072 1073 R0 = (N % D) << 4; /* 32-28 == 4 shifts possible at max */ 1074 Q1 = N / D; /* integer part, only the 4 least significant bits 1075 will be visible in the result */ 1076 1077 /* division using radix 16, 7 nibbles in the result */ 1078 for (i = 0; i < 7; i++) { 1079 Q1 = (Q1 << 4) | R0 / D; 1080 R0 = (R0 % D) << 4; 1081 } 1082 /* rounding */ 1083 if ((R0 >> 3) >= D) 1084 Q1++; 1085 1086 return Q1; 1087 } 1088 1089 /* 1090 * \fn u32 log1_times100( u32 x) 1091 * \brief Compute: 100*log10(x) 1092 * \param x 32 bits 1093 * \return 100*log10(x) 1094 * 1095 * 100*log10(x) 1096 * = 100*(log2(x)/log2(10))) 1097 * = (100*(2^15)*log2(x))/((2^15)*log2(10)) 1098 * = ((200*(2^15)*log2(x))/((2^15)*log2(10)))/2 1099 * = ((200*(2^15)*(log2(x/y)+log2(y)))/((2^15)*log2(10)))/2 1100 * = ((200*(2^15)*log2(x/y))+(200*(2^15)*log2(y)))/((2^15)*log2(10)))/2 1101 * 1102 * where y = 2^k and 1<= (x/y) < 2 1103 */ 1104 1105 static u32 log1_times100(u32 x) 1106 { 1107 static const u8 scale = 15; 1108 static const u8 index_width = 5; 1109 /* 1110 log2lut[n] = (1<<scale) * 200 * log2( 1.0 + ( (1.0/(1<<INDEXWIDTH)) * n )) 1111 0 <= n < ((1<<INDEXWIDTH)+1) 1112 */ 1113 1114 static const u32 log2lut[] = { 1115 0, /* 0.000000 */ 1116 290941, /* 290941.300628 */ 1117 573196, /* 573196.476418 */ 1118 847269, /* 847269.179851 */ 1119 1113620, /* 1113620.489452 */ 1120 1372674, /* 1372673.576986 */ 1121 1624818, /* 1624817.752104 */ 1122 1870412, /* 1870411.981536 */ 1123 2109788, /* 2109787.962654 */ 1124 2343253, /* 2343252.817465 */ 1125 2571091, /* 2571091.461923 */ 1126 2793569, /* 2793568.696416 */ 1127 3010931, /* 3010931.055901 */ 1128 3223408, /* 3223408.452106 */ 1129 3431216, /* 3431215.635215 */ 1130 3634553, /* 3634553.498355 */ 1131 3833610, /* 3833610.244726 */ 1132 4028562, /* 4028562.434393 */ 1133 4219576, /* 4219575.925308 */ 1134 4406807, /* 4406806.721144 */ 1135 4590402, /* 4590401.736809 */ 1136 4770499, /* 4770499.491025 */ 1137 4947231, /* 4947230.734179 */ 1138 5120719, /* 5120719.018555 */ 1139 5291081, /* 5291081.217197 */ 1140 5458428, /* 5458427.996830 */ 1141 5622864, /* 5622864.249668 */ 1142 5784489, /* 5784489.488298 */ 1143 5943398, /* 5943398.207380 */ 1144 6099680, /* 6099680.215452 */ 1145 6253421, /* 6253420.939751 */ 1146 6404702, /* 6404701.706649 */ 1147 6553600, /* 6553600.000000 */ 1148 }; 1149 1150 u8 i = 0; 1151 u32 y = 0; 1152 u32 d = 0; 1153 u32 k = 0; 1154 u32 r = 0; 1155 1156 if (x == 0) 1157 return 0; 1158 1159 /* Scale x (normalize) */ 1160 /* computing y in log(x/y) = log(x) - log(y) */ 1161 if ((x & (((u32) (-1)) << (scale + 1))) == 0) { 1162 for (k = scale; k > 0; k--) { 1163 if (x & (((u32) 1) << scale)) 1164 break; 1165 x <<= 1; 1166 } 1167 } else { 1168 for (k = scale; k < 31; k++) { 1169 if ((x & (((u32) (-1)) << (scale + 1))) == 0) 1170 break; 1171 x >>= 1; 1172 } 1173 } 1174 /* 1175 Now x has binary point between bit[scale] and bit[scale-1] 1176 and 1.0 <= x < 2.0 */ 1177 1178 /* correction for division: log(x) = log(x/y)+log(y) */ 1179 y = k * ((((u32) 1) << scale) * 200); 1180 1181 /* remove integer part */ 1182 x &= ((((u32) 1) << scale) - 1); 1183 /* get index */ 1184 i = (u8) (x >> (scale - index_width)); 1185 /* compute delta (x-a) */ 1186 d = x & ((((u32) 1) << (scale - index_width)) - 1); 1187 /* compute log, multiplication ( d* (.. )) must be within range ! */ 1188 y += log2lut[i] + 1189 ((d * (log2lut[i + 1] - log2lut[i])) >> (scale - index_width)); 1190 /* Conver to log10() */ 1191 y /= 108853; /* (log2(10) << scale) */ 1192 r = (y >> 1); 1193 /* rounding */ 1194 if (y & ((u32)1)) 1195 r++; 1196 1197 return r; 1198 1199 } 1200 1201 /* 1202 * \fn u32 frac_times1e6( u16 N, u32 D) 1203 * \brief Compute: (N/D) * 1000000. 1204 * \param N nominator 16-bits. 1205 * \param D denominator 32-bits. 1206 * \return u32 1207 * \retval ((N/D) * 1000000), 32 bits 1208 * 1209 * No check on D=0! 1210 */ 1211 static u32 frac_times1e6(u32 N, u32 D) 1212 { 1213 u32 remainder = 0; 1214 u32 frac = 0; 1215 1216 /* 1217 frac = (N * 1000000) / D 1218 To let it fit in a 32 bits computation: 1219 frac = (N * (1000000 >> 4)) / (D >> 4) 1220 This would result in a problem in case D < 16 (div by 0). 1221 So we do it more elaborate as shown below. 1222 */ 1223 frac = (((u32) N) * (1000000 >> 4)) / D; 1224 frac <<= 4; 1225 remainder = (((u32) N) * (1000000 >> 4)) % D; 1226 remainder <<= 4; 1227 frac += remainder / D; 1228 remainder = remainder % D; 1229 if ((remainder * 2) > D) 1230 frac++; 1231 1232 return frac; 1233 } 1234 1235 /*============================================================================*/ 1236 1237 1238 /* 1239 * \brief Values for NICAM prescaler gain. Computed from dB to integer 1240 * and rounded. For calc used formula: 16*10^(prescaleGain[dB]/20). 1241 * 1242 */ 1243 #if 0 1244 /* Currently, unused as we lack support for analog TV */ 1245 static const u16 nicam_presc_table_val[43] = { 1246 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4, 1247 5, 5, 6, 6, 7, 8, 9, 10, 11, 13, 14, 16, 1248 18, 20, 23, 25, 28, 32, 36, 40, 45, 1249 51, 57, 64, 71, 80, 90, 101, 113, 127 1250 }; 1251 #endif 1252 1253 /*============================================================================*/ 1254 /*== END HELPER FUNCTIONS ==*/ 1255 /*============================================================================*/ 1256 1257 /*============================================================================*/ 1258 /*============================================================================*/ 1259 /*== DRXJ DAP FUNCTIONS ==*/ 1260 /*============================================================================*/ 1261 /*============================================================================*/ 1262 1263 /* 1264 This layer takes care of some device specific register access protocols: 1265 -conversion to short address format 1266 -access to audio block 1267 This layer is placed between the drx_dap_fasi and the rest of the drxj 1268 specific implementation. This layer can use address map knowledge whereas 1269 dap_fasi may not use memory map knowledge. 1270 1271 * For audio currently only 16 bits read and write register access is 1272 supported. More is not needed. RMW and 32 or 8 bit access on audio 1273 registers will have undefined behaviour. Flags (RMW, CRC reset, broadcast 1274 single/multi master) will be ignored. 1275 1276 TODO: check ignoring single/multimaster is ok for AUD access ? 1277 */ 1278 1279 #define DRXJ_ISAUDWRITE(addr) (((((addr)>>16)&1) == 1) ? true : false) 1280 #define DRXJ_DAP_AUDTRIF_TIMEOUT 80 /* millisec */ 1281 /*============================================================================*/ 1282 1283 /* 1284 * \fn bool is_handled_by_aud_tr_if( u32 addr ) 1285 * \brief Check if this address is handled by the audio token ring interface. 1286 * \param addr 1287 * \return bool 1288 * \retval true Yes, handled by audio token ring interface 1289 * \retval false No, not handled by audio token ring interface 1290 * 1291 */ 1292 static 1293 bool is_handled_by_aud_tr_if(u32 addr) 1294 { 1295 bool retval = false; 1296 1297 if ((DRXDAP_FASI_ADDR2BLOCK(addr) == 4) && 1298 (DRXDAP_FASI_ADDR2BANK(addr) > 1) && 1299 (DRXDAP_FASI_ADDR2BANK(addr) < 6)) { 1300 retval = true; 1301 } 1302 1303 return retval; 1304 } 1305 1306 /*============================================================================*/ 1307 1308 int drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr, 1309 u16 w_count, 1310 u8 *wData, 1311 struct i2c_device_addr *r_dev_addr, 1312 u16 r_count, u8 *r_data) 1313 { 1314 struct drx39xxj_state *state; 1315 struct i2c_msg msg[2]; 1316 unsigned int num_msgs; 1317 1318 if (w_dev_addr == NULL) { 1319 /* Read only */ 1320 state = r_dev_addr->user_data; 1321 msg[0].addr = r_dev_addr->i2c_addr >> 1; 1322 msg[0].flags = I2C_M_RD; 1323 msg[0].buf = r_data; 1324 msg[0].len = r_count; 1325 num_msgs = 1; 1326 } else if (r_dev_addr == NULL) { 1327 /* Write only */ 1328 state = w_dev_addr->user_data; 1329 msg[0].addr = w_dev_addr->i2c_addr >> 1; 1330 msg[0].flags = 0; 1331 msg[0].buf = wData; 1332 msg[0].len = w_count; 1333 num_msgs = 1; 1334 } else { 1335 /* Both write and read */ 1336 state = w_dev_addr->user_data; 1337 msg[0].addr = w_dev_addr->i2c_addr >> 1; 1338 msg[0].flags = 0; 1339 msg[0].buf = wData; 1340 msg[0].len = w_count; 1341 msg[1].addr = r_dev_addr->i2c_addr >> 1; 1342 msg[1].flags = I2C_M_RD; 1343 msg[1].buf = r_data; 1344 msg[1].len = r_count; 1345 num_msgs = 2; 1346 } 1347 1348 if (state->i2c == NULL) { 1349 pr_err("i2c was zero, aborting\n"); 1350 return 0; 1351 } 1352 if (i2c_transfer(state->i2c, msg, num_msgs) != num_msgs) { 1353 pr_warn("drx3933: I2C write/read failed\n"); 1354 return -EREMOTEIO; 1355 } 1356 1357 #ifdef DJH_DEBUG 1358 if (w_dev_addr == NULL || r_dev_addr == NULL) 1359 return 0; 1360 1361 state = w_dev_addr->user_data; 1362 1363 if (state->i2c == NULL) 1364 return 0; 1365 1366 msg[0].addr = w_dev_addr->i2c_addr; 1367 msg[0].flags = 0; 1368 msg[0].buf = wData; 1369 msg[0].len = w_count; 1370 msg[1].addr = r_dev_addr->i2c_addr; 1371 msg[1].flags = I2C_M_RD; 1372 msg[1].buf = r_data; 1373 msg[1].len = r_count; 1374 num_msgs = 2; 1375 1376 pr_debug("drx3933 i2c operation addr=%x i2c=%p, wc=%x rc=%x\n", 1377 w_dev_addr->i2c_addr, state->i2c, w_count, r_count); 1378 1379 if (i2c_transfer(state->i2c, msg, 2) != 2) { 1380 pr_warn("drx3933: I2C write/read failed\n"); 1381 return -EREMOTEIO; 1382 } 1383 #endif 1384 return 0; 1385 } 1386 1387 /*============================================================================*/ 1388 1389 /***************************** 1390 * 1391 * int drxdap_fasi_read_block ( 1392 * struct i2c_device_addr *dev_addr, -- address of I2C device 1393 * u32 addr, -- address of chip register/memory 1394 * u16 datasize, -- number of bytes to read 1395 * u8 *data, -- data to receive 1396 * u32 flags) -- special device flags 1397 * 1398 * Read block data from chip address. Because the chip is word oriented, 1399 * the number of bytes to read must be even. 1400 * 1401 * Make sure that the buffer to receive the data is large enough. 1402 * 1403 * Although this function expects an even number of bytes, it is still byte 1404 * oriented, and the data read back is NOT translated to the endianness of 1405 * the target platform. 1406 * 1407 * Output: 1408 * - 0 if reading was successful 1409 * in that case: data read is in *data. 1410 * - -EIO if anything went wrong 1411 * 1412 ******************************/ 1413 1414 static int drxdap_fasi_read_block(struct i2c_device_addr *dev_addr, 1415 u32 addr, 1416 u16 datasize, 1417 u8 *data, u32 flags) 1418 { 1419 u8 buf[4]; 1420 u16 bufx; 1421 int rc; 1422 u16 overhead_size = 0; 1423 1424 /* Check parameters ******************************************************* */ 1425 if (dev_addr == NULL) 1426 return -EINVAL; 1427 1428 overhead_size = (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1) + 1429 (DRXDAP_FASI_LONG_FORMAT(addr) ? 4 : 2); 1430 1431 if ((DRXDAP_FASI_OFFSET_TOO_LARGE(addr)) || 1432 ((!(DRXDAPFASI_LONG_ADDR_ALLOWED)) && 1433 DRXDAP_FASI_LONG_FORMAT(addr)) || 1434 (overhead_size > (DRXDAP_MAX_WCHUNKSIZE)) || 1435 ((datasize != 0) && (data == NULL)) || ((datasize & 1) == 1)) { 1436 return -EINVAL; 1437 } 1438 1439 /* ReadModifyWrite & mode flag bits are not allowed */ 1440 flags &= (~DRXDAP_FASI_RMW & ~DRXDAP_FASI_MODEFLAGS); 1441 #if DRXDAP_SINGLE_MASTER 1442 flags |= DRXDAP_FASI_SINGLE_MASTER; 1443 #endif 1444 1445 /* Read block from I2C **************************************************** */ 1446 do { 1447 u16 todo = (datasize < DRXDAP_MAX_RCHUNKSIZE ? 1448 datasize : DRXDAP_MAX_RCHUNKSIZE); 1449 1450 bufx = 0; 1451 1452 addr &= ~DRXDAP_FASI_FLAGS; 1453 addr |= flags; 1454 1455 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 1456 /* short format address preferred but long format otherwise */ 1457 if (DRXDAP_FASI_LONG_FORMAT(addr)) { 1458 #endif 1459 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1) 1460 buf[bufx++] = (u8) (((addr << 1) & 0xFF) | 0x01); 1461 buf[bufx++] = (u8) ((addr >> 16) & 0xFF); 1462 buf[bufx++] = (u8) ((addr >> 24) & 0xFF); 1463 buf[bufx++] = (u8) ((addr >> 7) & 0xFF); 1464 #endif 1465 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 1466 } else { 1467 #endif 1468 #if (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1) 1469 buf[bufx++] = (u8) ((addr << 1) & 0xFF); 1470 buf[bufx++] = 1471 (u8) (((addr >> 16) & 0x0F) | 1472 ((addr >> 18) & 0xF0)); 1473 #endif 1474 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED == 1) && (DRXDAPFASI_SHORT_ADDR_ALLOWED == 1)) 1475 } 1476 #endif 1477 1478 #if DRXDAP_SINGLE_MASTER 1479 /* 1480 * In single master mode, split the read and write actions. 1481 * No special action is needed for write chunks here. 1482 */ 1483 rc = drxbsp_i2c_write_read(dev_addr, bufx, buf, 1484 NULL, 0, NULL); 1485 if (rc == 0) 1486 rc = drxbsp_i2c_write_read(NULL, 0, NULL, dev_addr, todo, data); 1487 #else 1488 /* In multi master mode, do everything in one RW action */ 1489 rc = drxbsp_i2c_write_read(dev_addr, bufx, buf, dev_addr, todo, 1490 data); 1491 #endif 1492 data += todo; 1493 addr += (todo >> 1); 1494 datasize -= todo; 1495 } while (datasize && rc == 0); 1496 1497 return rc; 1498 } 1499 1500 1501 /***************************** 1502 * 1503 * int drxdap_fasi_read_reg16 ( 1504 * struct i2c_device_addr *dev_addr, -- address of I2C device 1505 * u32 addr, -- address of chip register/memory 1506 * u16 *data, -- data to receive 1507 * u32 flags) -- special device flags 1508 * 1509 * Read one 16-bit register or memory location. The data received back is 1510 * converted back to the target platform's endianness. 1511 * 1512 * Output: 1513 * - 0 if reading was successful 1514 * in that case: read data is at *data 1515 * - -EIO if anything went wrong 1516 * 1517 ******************************/ 1518 1519 static int drxdap_fasi_read_reg16(struct i2c_device_addr *dev_addr, 1520 u32 addr, 1521 u16 *data, u32 flags) 1522 { 1523 u8 buf[sizeof(*data)]; 1524 int rc; 1525 1526 if (!data) 1527 return -EINVAL; 1528 1529 rc = drxdap_fasi_read_block(dev_addr, addr, sizeof(*data), buf, flags); 1530 *data = buf[0] + (((u16) buf[1]) << 8); 1531 return rc; 1532 } 1533 1534 /***************************** 1535 * 1536 * int drxdap_fasi_read_reg32 ( 1537 * struct i2c_device_addr *dev_addr, -- address of I2C device 1538 * u32 addr, -- address of chip register/memory 1539 * u32 *data, -- data to receive 1540 * u32 flags) -- special device flags 1541 * 1542 * Read one 32-bit register or memory location. The data received back is 1543 * converted back to the target platform's endianness. 1544 * 1545 * Output: 1546 * - 0 if reading was successful 1547 * in that case: read data is at *data 1548 * - -EIO if anything went wrong 1549 * 1550 ******************************/ 1551 1552 static int drxdap_fasi_read_reg32(struct i2c_device_addr *dev_addr, 1553 u32 addr, 1554 u32 *data, u32 flags) 1555 { 1556 u8 buf[sizeof(*data)]; 1557 int rc; 1558 1559 if (!data) 1560 return -EINVAL; 1561 1562 rc = drxdap_fasi_read_block(dev_addr, addr, sizeof(*data), buf, flags); 1563 *data = (((u32) buf[0]) << 0) + 1564 (((u32) buf[1]) << 8) + 1565 (((u32) buf[2]) << 16) + (((u32) buf[3]) << 24); 1566 return rc; 1567 } 1568 1569 /***************************** 1570 * 1571 * int drxdap_fasi_write_block ( 1572 * struct i2c_device_addr *dev_addr, -- address of I2C device 1573 * u32 addr, -- address of chip register/memory 1574 * u16 datasize, -- number of bytes to read 1575 * u8 *data, -- data to receive 1576 * u32 flags) -- special device flags 1577 * 1578 * Write block data to chip address. Because the chip is word oriented, 1579 * the number of bytes to write must be even. 1580 * 1581 * Although this function expects an even number of bytes, it is still byte 1582 * oriented, and the data being written is NOT translated from the endianness of 1583 * the target platform. 1584 * 1585 * Output: 1586 * - 0 if writing was successful 1587 * - -EIO if anything went wrong 1588 * 1589 ******************************/ 1590 1591 static int drxdap_fasi_write_block(struct i2c_device_addr *dev_addr, 1592 u32 addr, 1593 u16 datasize, 1594 u8 *data, u32 flags) 1595 { 1596 u8 buf[DRXDAP_MAX_WCHUNKSIZE]; 1597 int st = -EIO; 1598 int first_err = 0; 1599 u16 overhead_size = 0; 1600 u16 block_size = 0; 1601 1602 /* Check parameters ******************************************************* */ 1603 if (dev_addr == NULL) 1604 return -EINVAL; 1605 1606 overhead_size = (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1) + 1607 (DRXDAP_FASI_LONG_FORMAT(addr) ? 4 : 2); 1608 1609 if ((DRXDAP_FASI_OFFSET_TOO_LARGE(addr)) || 1610 ((!(DRXDAPFASI_LONG_ADDR_ALLOWED)) && 1611 DRXDAP_FASI_LONG_FORMAT(addr)) || 1612 (overhead_size > (DRXDAP_MAX_WCHUNKSIZE)) || 1613 ((datasize != 0) && (data == NULL)) || ((datasize & 1) == 1)) 1614 return -EINVAL; 1615 1616 flags &= DRXDAP_FASI_FLAGS; 1617 flags &= ~DRXDAP_FASI_MODEFLAGS; 1618 #if DRXDAP_SINGLE_MASTER 1619 flags |= DRXDAP_FASI_SINGLE_MASTER; 1620 #endif 1621 1622 /* Write block to I2C ***************************************************** */ 1623 block_size = ((DRXDAP_MAX_WCHUNKSIZE) - overhead_size) & ~1; 1624 do { 1625 u16 todo = 0; 1626 u16 bufx = 0; 1627 1628 /* Buffer device address */ 1629 addr &= ~DRXDAP_FASI_FLAGS; 1630 addr |= flags; 1631 #if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)) 1632 /* short format address preferred but long format otherwise */ 1633 if (DRXDAP_FASI_LONG_FORMAT(addr)) { 1634 #endif 1635 #if ((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) 1636 buf[bufx++] = (u8) (((addr << 1) & 0xFF) | 0x01); 1637 buf[bufx++] = (u8) ((addr >> 16) & 0xFF); 1638 buf[bufx++] = (u8) ((addr >> 24) & 0xFF); 1639 buf[bufx++] = (u8) ((addr >> 7) & 0xFF); 1640 #endif 1641 #if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)) 1642 } else { 1643 #endif 1644 #if ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1) 1645 buf[bufx++] = (u8) ((addr << 1) & 0xFF); 1646 buf[bufx++] = 1647 (u8) (((addr >> 16) & 0x0F) | 1648 ((addr >> 18) & 0xF0)); 1649 #endif 1650 #if (((DRXDAPFASI_LONG_ADDR_ALLOWED) == 1) && ((DRXDAPFASI_SHORT_ADDR_ALLOWED) == 1)) 1651 } 1652 #endif 1653 1654 /* 1655 In single master mode block_size can be 0. In such a case this I2C 1656 sequense will be visible: (1) write address {i2c addr, 1657 4 bytes chip address} (2) write data {i2c addr, 4 bytes data } 1658 (3) write address (4) write data etc... 1659 Address must be rewritten because HI is reset after data transport and 1660 expects an address. 1661 */ 1662 todo = (block_size < datasize ? block_size : datasize); 1663 if (todo == 0) { 1664 u16 overhead_size_i2c_addr = 0; 1665 u16 data_block_size = 0; 1666 1667 overhead_size_i2c_addr = 1668 (IS_I2C_10BIT(dev_addr->i2c_addr) ? 2 : 1); 1669 data_block_size = 1670 (DRXDAP_MAX_WCHUNKSIZE - overhead_size_i2c_addr) & ~1; 1671 1672 /* write device address */ 1673 st = drxbsp_i2c_write_read(dev_addr, 1674 (u16) (bufx), 1675 buf, 1676 (struct i2c_device_addr *)(NULL), 1677 0, (u8 *)(NULL)); 1678 1679 if ((st != 0) && (first_err == 0)) { 1680 /* at the end, return the first error encountered */ 1681 first_err = st; 1682 } 1683 bufx = 0; 1684 todo = 1685 (data_block_size < 1686 datasize ? data_block_size : datasize); 1687 } 1688 memcpy(&buf[bufx], data, todo); 1689 /* write (address if can do and) data */ 1690 st = drxbsp_i2c_write_read(dev_addr, 1691 (u16) (bufx + todo), 1692 buf, 1693 (struct i2c_device_addr *)(NULL), 1694 0, (u8 *)(NULL)); 1695 1696 if ((st != 0) && (first_err == 0)) { 1697 /* at the end, return the first error encountered */ 1698 first_err = st; 1699 } 1700 datasize -= todo; 1701 data += todo; 1702 addr += (todo >> 1); 1703 } while (datasize); 1704 1705 return first_err; 1706 } 1707 1708 /***************************** 1709 * 1710 * int drxdap_fasi_write_reg16 ( 1711 * struct i2c_device_addr *dev_addr, -- address of I2C device 1712 * u32 addr, -- address of chip register/memory 1713 * u16 data, -- data to send 1714 * u32 flags) -- special device flags 1715 * 1716 * Write one 16-bit register or memory location. The data being written is 1717 * converted from the target platform's endianness to little endian. 1718 * 1719 * Output: 1720 * - 0 if writing was successful 1721 * - -EIO if anything went wrong 1722 * 1723 ******************************/ 1724 1725 static int drxdap_fasi_write_reg16(struct i2c_device_addr *dev_addr, 1726 u32 addr, 1727 u16 data, u32 flags) 1728 { 1729 u8 buf[sizeof(data)]; 1730 1731 buf[0] = (u8) ((data >> 0) & 0xFF); 1732 buf[1] = (u8) ((data >> 8) & 0xFF); 1733 1734 return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags); 1735 } 1736 1737 /***************************** 1738 * 1739 * int drxdap_fasi_read_modify_write_reg16 ( 1740 * struct i2c_device_addr *dev_addr, -- address of I2C device 1741 * u32 waddr, -- address of chip register/memory 1742 * u32 raddr, -- chip address to read back from 1743 * u16 wdata, -- data to send 1744 * u16 *rdata) -- data to receive back 1745 * 1746 * Write 16-bit data, then read back the original contents of that location. 1747 * Requires long addressing format to be allowed. 1748 * 1749 * Before sending data, the data is converted to little endian. The 1750 * data received back is converted back to the target platform's endianness. 1751 * 1752 * WARNING: This function is only guaranteed to work if there is one 1753 * master on the I2C bus. 1754 * 1755 * Output: 1756 * - 0 if reading was successful 1757 * in that case: read back data is at *rdata 1758 * - -EIO if anything went wrong 1759 * 1760 ******************************/ 1761 1762 static int drxdap_fasi_read_modify_write_reg16(struct i2c_device_addr *dev_addr, 1763 u32 waddr, 1764 u32 raddr, 1765 u16 wdata, u16 *rdata) 1766 { 1767 int rc = -EIO; 1768 1769 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1) 1770 if (rdata == NULL) 1771 return -EINVAL; 1772 1773 rc = drxdap_fasi_write_reg16(dev_addr, waddr, wdata, DRXDAP_FASI_RMW); 1774 if (rc == 0) 1775 rc = drxdap_fasi_read_reg16(dev_addr, raddr, rdata, 0); 1776 #endif 1777 1778 return rc; 1779 } 1780 1781 /***************************** 1782 * 1783 * int drxdap_fasi_write_reg32 ( 1784 * struct i2c_device_addr *dev_addr, -- address of I2C device 1785 * u32 addr, -- address of chip register/memory 1786 * u32 data, -- data to send 1787 * u32 flags) -- special device flags 1788 * 1789 * Write one 32-bit register or memory location. The data being written is 1790 * converted from the target platform's endianness to little endian. 1791 * 1792 * Output: 1793 * - 0 if writing was successful 1794 * - -EIO if anything went wrong 1795 * 1796 ******************************/ 1797 1798 static int drxdap_fasi_write_reg32(struct i2c_device_addr *dev_addr, 1799 u32 addr, 1800 u32 data, u32 flags) 1801 { 1802 u8 buf[sizeof(data)]; 1803 1804 buf[0] = (u8) ((data >> 0) & 0xFF); 1805 buf[1] = (u8) ((data >> 8) & 0xFF); 1806 buf[2] = (u8) ((data >> 16) & 0xFF); 1807 buf[3] = (u8) ((data >> 24) & 0xFF); 1808 1809 return drxdap_fasi_write_block(dev_addr, addr, sizeof(data), buf, flags); 1810 } 1811 1812 /*============================================================================*/ 1813 1814 /* 1815 * \fn int drxj_dap_rm_write_reg16short 1816 * \brief Read modify write 16 bits audio register using short format only. 1817 * \param dev_addr 1818 * \param waddr Address to write to 1819 * \param raddr Address to read from (usually SIO_HI_RA_RAM_S0_RMWBUF__A) 1820 * \param wdata Data to write 1821 * \param rdata Buffer for data to read 1822 * \return int 1823 * \retval 0 Success 1824 * \retval -EIO Timeout, I2C error, illegal bank 1825 * 1826 * 16 bits register read modify write access using short addressing format only. 1827 * Requires knowledge of the registermap, thus device dependent. 1828 * Using DAP FASI directly to avoid endless recursion of RMWs to audio registers. 1829 * 1830 */ 1831 1832 /* TODO correct define should be #if ( DRXDAPFASI_SHORT_ADDR_ALLOWED==1 ) 1833 See comments drxj_dap_read_modify_write_reg16 */ 1834 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 0) 1835 static int drxj_dap_rm_write_reg16short(struct i2c_device_addr *dev_addr, 1836 u32 waddr, 1837 u32 raddr, 1838 u16 wdata, u16 *rdata) 1839 { 1840 int rc; 1841 1842 if (rdata == NULL) 1843 return -EINVAL; 1844 1845 /* Set RMW flag */ 1846 rc = drxdap_fasi_write_reg16(dev_addr, 1847 SIO_HI_RA_RAM_S0_FLG_ACC__A, 1848 SIO_HI_RA_RAM_S0_FLG_ACC_S0_RWM__M, 1849 0x0000); 1850 if (rc == 0) { 1851 /* Write new data: triggers RMW */ 1852 rc = drxdap_fasi_write_reg16(dev_addr, waddr, wdata, 1853 0x0000); 1854 } 1855 if (rc == 0) { 1856 /* Read old data */ 1857 rc = drxdap_fasi_read_reg16(dev_addr, raddr, rdata, 1858 0x0000); 1859 } 1860 if (rc == 0) { 1861 /* Reset RMW flag */ 1862 rc = drxdap_fasi_write_reg16(dev_addr, 1863 SIO_HI_RA_RAM_S0_FLG_ACC__A, 1864 0, 0x0000); 1865 } 1866 1867 return rc; 1868 } 1869 #endif 1870 1871 /*============================================================================*/ 1872 1873 static int drxj_dap_read_modify_write_reg16(struct i2c_device_addr *dev_addr, 1874 u32 waddr, 1875 u32 raddr, 1876 u16 wdata, u16 *rdata) 1877 { 1878 /* TODO: correct short/long addressing format decision, 1879 now long format has higher prio then short because short also 1880 needs virt bnks (not impl yet) for certain audio registers */ 1881 #if (DRXDAPFASI_LONG_ADDR_ALLOWED == 1) 1882 return drxdap_fasi_read_modify_write_reg16(dev_addr, 1883 waddr, 1884 raddr, wdata, rdata); 1885 #else 1886 return drxj_dap_rm_write_reg16short(dev_addr, waddr, raddr, wdata, rdata); 1887 #endif 1888 } 1889 1890 1891 /*============================================================================*/ 1892 1893 /* 1894 * \fn int drxj_dap_read_aud_reg16 1895 * \brief Read 16 bits audio register 1896 * \param dev_addr 1897 * \param addr 1898 * \param data 1899 * \return int 1900 * \retval 0 Success 1901 * \retval -EIO Timeout, I2C error, illegal bank 1902 * 1903 * 16 bits register read access via audio token ring interface. 1904 * 1905 */ 1906 static int drxj_dap_read_aud_reg16(struct i2c_device_addr *dev_addr, 1907 u32 addr, u16 *data) 1908 { 1909 u32 start_timer = 0; 1910 u32 current_timer = 0; 1911 u32 delta_timer = 0; 1912 u16 tr_status = 0; 1913 int stat = -EIO; 1914 1915 /* No read possible for bank 3, return with error */ 1916 if (DRXDAP_FASI_ADDR2BANK(addr) == 3) { 1917 stat = -EINVAL; 1918 } else { 1919 const u32 write_bit = ((dr_xaddr_t) 1) << 16; 1920 1921 /* Force reset write bit */ 1922 addr &= (~write_bit); 1923 1924 /* Set up read */ 1925 start_timer = jiffies_to_msecs(jiffies); 1926 do { 1927 /* RMW to aud TR IF until request is granted or timeout */ 1928 stat = drxj_dap_read_modify_write_reg16(dev_addr, 1929 addr, 1930 SIO_HI_RA_RAM_S0_RMWBUF__A, 1931 0x0000, &tr_status); 1932 1933 if (stat != 0) 1934 break; 1935 1936 current_timer = jiffies_to_msecs(jiffies); 1937 delta_timer = current_timer - start_timer; 1938 if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) { 1939 stat = -EIO; 1940 break; 1941 } 1942 1943 } while (((tr_status & AUD_TOP_TR_CTR_FIFO_LOCK__M) == 1944 AUD_TOP_TR_CTR_FIFO_LOCK_LOCKED) || 1945 ((tr_status & AUD_TOP_TR_CTR_FIFO_FULL__M) == 1946 AUD_TOP_TR_CTR_FIFO_FULL_FULL)); 1947 } /* if ( DRXDAP_FASI_ADDR2BANK(addr)!=3 ) */ 1948 1949 /* Wait for read ready status or timeout */ 1950 if (stat == 0) { 1951 start_timer = jiffies_to_msecs(jiffies); 1952 1953 while ((tr_status & AUD_TOP_TR_CTR_FIFO_RD_RDY__M) != 1954 AUD_TOP_TR_CTR_FIFO_RD_RDY_READY) { 1955 stat = drxj_dap_read_reg16(dev_addr, 1956 AUD_TOP_TR_CTR__A, 1957 &tr_status, 0x0000); 1958 if (stat != 0) 1959 break; 1960 1961 current_timer = jiffies_to_msecs(jiffies); 1962 delta_timer = current_timer - start_timer; 1963 if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) { 1964 stat = -EIO; 1965 break; 1966 } 1967 } /* while ( ... ) */ 1968 } 1969 1970 /* Read value */ 1971 if (stat == 0) 1972 stat = drxj_dap_read_modify_write_reg16(dev_addr, 1973 AUD_TOP_TR_RD_REG__A, 1974 SIO_HI_RA_RAM_S0_RMWBUF__A, 1975 0x0000, data); 1976 return stat; 1977 } 1978 1979 /*============================================================================*/ 1980 1981 static int drxj_dap_read_reg16(struct i2c_device_addr *dev_addr, 1982 u32 addr, 1983 u16 *data, u32 flags) 1984 { 1985 int stat = -EIO; 1986 1987 /* Check param */ 1988 if ((dev_addr == NULL) || (data == NULL)) 1989 return -EINVAL; 1990 1991 if (is_handled_by_aud_tr_if(addr)) 1992 stat = drxj_dap_read_aud_reg16(dev_addr, addr, data); 1993 else 1994 stat = drxdap_fasi_read_reg16(dev_addr, addr, data, flags); 1995 1996 return stat; 1997 } 1998 /*============================================================================*/ 1999 2000 /* 2001 * \fn int drxj_dap_write_aud_reg16 2002 * \brief Write 16 bits audio register 2003 * \param dev_addr 2004 * \param addr 2005 * \param data 2006 * \return int 2007 * \retval 0 Success 2008 * \retval -EIO Timeout, I2C error, illegal bank 2009 * 2010 * 16 bits register write access via audio token ring interface. 2011 * 2012 */ 2013 static int drxj_dap_write_aud_reg16(struct i2c_device_addr *dev_addr, 2014 u32 addr, u16 data) 2015 { 2016 int stat = -EIO; 2017 2018 /* No write possible for bank 2, return with error */ 2019 if (DRXDAP_FASI_ADDR2BANK(addr) == 2) { 2020 stat = -EINVAL; 2021 } else { 2022 u32 start_timer = 0; 2023 u32 current_timer = 0; 2024 u32 delta_timer = 0; 2025 u16 tr_status = 0; 2026 const u32 write_bit = ((dr_xaddr_t) 1) << 16; 2027 2028 /* Force write bit */ 2029 addr |= write_bit; 2030 start_timer = jiffies_to_msecs(jiffies); 2031 do { 2032 /* RMW to aud TR IF until request is granted or timeout */ 2033 stat = drxj_dap_read_modify_write_reg16(dev_addr, 2034 addr, 2035 SIO_HI_RA_RAM_S0_RMWBUF__A, 2036 data, &tr_status); 2037 if (stat != 0) 2038 break; 2039 2040 current_timer = jiffies_to_msecs(jiffies); 2041 delta_timer = current_timer - start_timer; 2042 if (delta_timer > DRXJ_DAP_AUDTRIF_TIMEOUT) { 2043 stat = -EIO; 2044 break; 2045 } 2046 2047 } while (((tr_status & AUD_TOP_TR_CTR_FIFO_LOCK__M) == 2048 AUD_TOP_TR_CTR_FIFO_LOCK_LOCKED) || 2049 ((tr_status & AUD_TOP_TR_CTR_FIFO_FULL__M) == 2050 AUD_TOP_TR_CTR_FIFO_FULL_FULL)); 2051 2052 } /* if ( DRXDAP_FASI_ADDR2BANK(addr)!=2 ) */ 2053 2054 return stat; 2055 } 2056 2057 /*============================================================================*/ 2058 2059 static int drxj_dap_write_reg16(struct i2c_device_addr *dev_addr, 2060 u32 addr, 2061 u16 data, u32 flags) 2062 { 2063 int stat = -EIO; 2064 2065 /* Check param */ 2066 if (dev_addr == NULL) 2067 return -EINVAL; 2068 2069 if (is_handled_by_aud_tr_if(addr)) 2070 stat = drxj_dap_write_aud_reg16(dev_addr, addr, data); 2071 else 2072 stat = drxdap_fasi_write_reg16(dev_addr, 2073 addr, data, flags); 2074 2075 return stat; 2076 } 2077 2078 /*============================================================================*/ 2079 2080 /* Free data ram in SIO HI */ 2081 #define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 2082 #define SIO_HI_RA_RAM_USR_END__A 0x420060 2083 2084 #define DRXJ_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) 2085 #define DRXJ_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) 2086 #define DRXJ_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ 2087 #define DRXJ_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE 2088 2089 /* 2090 * \fn int drxj_dap_atomic_read_write_block() 2091 * \brief Basic access routine for atomic read or write access 2092 * \param dev_addr pointer to i2c dev address 2093 * \param addr destination/source address 2094 * \param datasize size of data buffer in bytes 2095 * \param data pointer to data buffer 2096 * \return int 2097 * \retval 0 Success 2098 * \retval -EIO Timeout, I2C error, illegal bank 2099 * 2100 */ 2101 static 2102 int drxj_dap_atomic_read_write_block(struct i2c_device_addr *dev_addr, 2103 u32 addr, 2104 u16 datasize, 2105 u8 *data, bool read_flag) 2106 { 2107 struct drxj_hi_cmd hi_cmd; 2108 int rc; 2109 u16 word; 2110 u16 dummy = 0; 2111 u16 i = 0; 2112 2113 /* Parameter check */ 2114 if (!data || !dev_addr || ((datasize % 2)) || ((datasize / 2) > 8)) 2115 return -EINVAL; 2116 2117 /* Set up HI parameters to read or write n bytes */ 2118 hi_cmd.cmd = SIO_HI_RA_RAM_CMD_ATOMIC_COPY; 2119 hi_cmd.param1 = 2120 (u16) ((DRXDAP_FASI_ADDR2BLOCK(DRXJ_HI_ATOMIC_BUF_START) << 6) + 2121 DRXDAP_FASI_ADDR2BANK(DRXJ_HI_ATOMIC_BUF_START)); 2122 hi_cmd.param2 = 2123 (u16) DRXDAP_FASI_ADDR2OFFSET(DRXJ_HI_ATOMIC_BUF_START); 2124 hi_cmd.param3 = (u16) ((datasize / 2) - 1); 2125 if (!read_flag) 2126 hi_cmd.param3 |= DRXJ_HI_ATOMIC_WRITE; 2127 else 2128 hi_cmd.param3 |= DRXJ_HI_ATOMIC_READ; 2129 hi_cmd.param4 = (u16) ((DRXDAP_FASI_ADDR2BLOCK(addr) << 6) + 2130 DRXDAP_FASI_ADDR2BANK(addr)); 2131 hi_cmd.param5 = (u16) DRXDAP_FASI_ADDR2OFFSET(addr); 2132 2133 if (!read_flag) { 2134 /* write data to buffer */ 2135 for (i = 0; i < (datasize / 2); i++) { 2136 2137 word = ((u16) data[2 * i]); 2138 word += (((u16) data[(2 * i) + 1]) << 8); 2139 drxj_dap_write_reg16(dev_addr, 2140 (DRXJ_HI_ATOMIC_BUF_START + i), 2141 word, 0); 2142 } 2143 } 2144 2145 rc = hi_command(dev_addr, &hi_cmd, &dummy); 2146 if (rc != 0) { 2147 pr_err("error %d\n", rc); 2148 goto rw_error; 2149 } 2150 2151 if (read_flag) { 2152 /* read data from buffer */ 2153 for (i = 0; i < (datasize / 2); i++) { 2154 rc = drxj_dap_read_reg16(dev_addr, 2155 (DRXJ_HI_ATOMIC_BUF_START + i), 2156 &word, 0); 2157 if (rc) { 2158 pr_err("error %d\n", rc); 2159 goto rw_error; 2160 } 2161 data[2 * i] = (u8) (word & 0xFF); 2162 data[(2 * i) + 1] = (u8) (word >> 8); 2163 } 2164 } 2165 2166 return 0; 2167 2168 rw_error: 2169 return rc; 2170 2171 } 2172 2173 /*============================================================================*/ 2174 2175 /* 2176 * \fn int drxj_dap_atomic_read_reg32() 2177 * \brief Atomic read of 32 bits words 2178 */ 2179 static 2180 int drxj_dap_atomic_read_reg32(struct i2c_device_addr *dev_addr, 2181 u32 addr, 2182 u32 *data, u32 flags) 2183 { 2184 u8 buf[sizeof(*data)] = { 0 }; 2185 int rc; 2186 u32 word = 0; 2187 2188 if (!data) 2189 return -EINVAL; 2190 2191 rc = drxj_dap_atomic_read_write_block(dev_addr, addr, 2192 sizeof(*data), buf, true); 2193 2194 if (rc < 0) 2195 return 0; 2196 2197 word = (u32) buf[3]; 2198 word <<= 8; 2199 word |= (u32) buf[2]; 2200 word <<= 8; 2201 word |= (u32) buf[1]; 2202 word <<= 8; 2203 word |= (u32) buf[0]; 2204 2205 *data = word; 2206 2207 return rc; 2208 } 2209 2210 /*============================================================================*/ 2211 2212 /*============================================================================*/ 2213 /*== END DRXJ DAP FUNCTIONS ==*/ 2214 /*============================================================================*/ 2215 2216 /*============================================================================*/ 2217 /*============================================================================*/ 2218 /*== HOST INTERFACE FUNCTIONS ==*/ 2219 /*============================================================================*/ 2220 /*============================================================================*/ 2221 2222 /* 2223 * \fn int hi_cfg_command() 2224 * \brief Configure HI with settings stored in the demod structure. 2225 * \param demod Demodulator. 2226 * \return int. 2227 * 2228 * This routine was created because to much orthogonal settings have 2229 * been put into one HI API function (configure). Especially the I2C bridge 2230 * enable/disable should not need re-configuration of the HI. 2231 * 2232 */ 2233 static int hi_cfg_command(const struct drx_demod_instance *demod) 2234 { 2235 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 2236 struct drxj_hi_cmd hi_cmd; 2237 u16 result = 0; 2238 int rc; 2239 2240 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2241 2242 hi_cmd.cmd = SIO_HI_RA_RAM_CMD_CONFIG; 2243 hi_cmd.param1 = SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY; 2244 hi_cmd.param2 = ext_attr->hi_cfg_timing_div; 2245 hi_cmd.param3 = ext_attr->hi_cfg_bridge_delay; 2246 hi_cmd.param4 = ext_attr->hi_cfg_wake_up_key; 2247 hi_cmd.param5 = ext_attr->hi_cfg_ctrl; 2248 hi_cmd.param6 = ext_attr->hi_cfg_transmit; 2249 2250 rc = hi_command(demod->my_i2c_dev_addr, &hi_cmd, &result); 2251 if (rc != 0) { 2252 pr_err("error %d\n", rc); 2253 goto rw_error; 2254 } 2255 2256 /* Reset power down flag (set one call only) */ 2257 ext_attr->hi_cfg_ctrl &= (~(SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ)); 2258 2259 return 0; 2260 2261 rw_error: 2262 return rc; 2263 } 2264 2265 /* 2266 * \fn int hi_command() 2267 * \brief Configure HI with settings stored in the demod structure. 2268 * \param dev_addr I2C address. 2269 * \param cmd HI command. 2270 * \param result HI command result. 2271 * \return int. 2272 * 2273 * Sends command to HI 2274 * 2275 */ 2276 static int 2277 hi_command(struct i2c_device_addr *dev_addr, const struct drxj_hi_cmd *cmd, u16 *result) 2278 { 2279 u16 wait_cmd = 0; 2280 u16 nr_retries = 0; 2281 bool powerdown_cmd = false; 2282 int rc; 2283 2284 /* Write parameters */ 2285 switch (cmd->cmd) { 2286 2287 case SIO_HI_RA_RAM_CMD_CONFIG: 2288 case SIO_HI_RA_RAM_CMD_ATOMIC_COPY: 2289 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_6__A, cmd->param6, 0); 2290 if (rc != 0) { 2291 pr_err("error %d\n", rc); 2292 goto rw_error; 2293 } 2294 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_5__A, cmd->param5, 0); 2295 if (rc != 0) { 2296 pr_err("error %d\n", rc); 2297 goto rw_error; 2298 } 2299 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_4__A, cmd->param4, 0); 2300 if (rc != 0) { 2301 pr_err("error %d\n", rc); 2302 goto rw_error; 2303 } 2304 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_3__A, cmd->param3, 0); 2305 if (rc != 0) { 2306 pr_err("error %d\n", rc); 2307 goto rw_error; 2308 } 2309 fallthrough; 2310 case SIO_HI_RA_RAM_CMD_BRDCTRL: 2311 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_2__A, cmd->param2, 0); 2312 if (rc != 0) { 2313 pr_err("error %d\n", rc); 2314 goto rw_error; 2315 } 2316 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_PAR_1__A, cmd->param1, 0); 2317 if (rc != 0) { 2318 pr_err("error %d\n", rc); 2319 goto rw_error; 2320 } 2321 fallthrough; 2322 case SIO_HI_RA_RAM_CMD_NULL: 2323 /* No parameters */ 2324 break; 2325 2326 default: 2327 return -EINVAL; 2328 } 2329 2330 /* Write command */ 2331 rc = drxj_dap_write_reg16(dev_addr, SIO_HI_RA_RAM_CMD__A, cmd->cmd, 0); 2332 if (rc != 0) { 2333 pr_err("error %d\n", rc); 2334 goto rw_error; 2335 } 2336 2337 if ((cmd->cmd) == SIO_HI_RA_RAM_CMD_RESET) 2338 msleep(1); 2339 2340 /* Detect power down to omit reading result */ 2341 powerdown_cmd = (bool) ((cmd->cmd == SIO_HI_RA_RAM_CMD_CONFIG) && 2342 (((cmd-> 2343 param5) & SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) 2344 == SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ)); 2345 if (!powerdown_cmd) { 2346 /* Wait until command rdy */ 2347 do { 2348 nr_retries++; 2349 if (nr_retries > DRXJ_MAX_RETRIES) { 2350 pr_err("timeout\n"); 2351 goto rw_error; 2352 } 2353 2354 rc = drxj_dap_read_reg16(dev_addr, SIO_HI_RA_RAM_CMD__A, &wait_cmd, 0); 2355 if (rc != 0) { 2356 pr_err("error %d\n", rc); 2357 goto rw_error; 2358 } 2359 } while (wait_cmd != 0); 2360 2361 /* Read result */ 2362 rc = drxj_dap_read_reg16(dev_addr, SIO_HI_RA_RAM_RES__A, result, 0); 2363 if (rc != 0) { 2364 pr_err("error %d\n", rc); 2365 goto rw_error; 2366 } 2367 2368 } 2369 /* if ( powerdown_cmd == true ) */ 2370 return 0; 2371 rw_error: 2372 return rc; 2373 } 2374 2375 /* 2376 * \fn int init_hi( const struct drx_demod_instance *demod ) 2377 * \brief Initialise and configurate HI. 2378 * \param demod pointer to demod data. 2379 * \return int Return status. 2380 * \retval 0 Success. 2381 * \retval -EIO Failure. 2382 * 2383 * Needs to know Psys (System Clock period) and Posc (Osc Clock period) 2384 * Need to store configuration in driver because of the way I2C 2385 * bridging is controlled. 2386 * 2387 */ 2388 static int init_hi(const struct drx_demod_instance *demod) 2389 { 2390 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 2391 struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL); 2392 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2393 int rc; 2394 2395 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2396 common_attr = (struct drx_common_attr *) demod->my_common_attr; 2397 dev_addr = demod->my_i2c_dev_addr; 2398 2399 /* PATCH for bug 5003, HI ucode v3.1.0 */ 2400 rc = drxj_dap_write_reg16(dev_addr, 0x4301D7, 0x801, 0); 2401 if (rc != 0) { 2402 pr_err("error %d\n", rc); 2403 goto rw_error; 2404 } 2405 2406 /* Timing div, 250ns/Psys */ 2407 /* Timing div, = ( delay (nano seconds) * sysclk (kHz) )/ 1000 */ 2408 ext_attr->hi_cfg_timing_div = 2409 (u16) ((common_attr->sys_clock_freq / 1000) * HI_I2C_DELAY) / 1000; 2410 /* Clipping */ 2411 if ((ext_attr->hi_cfg_timing_div) > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) 2412 ext_attr->hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; 2413 /* Bridge delay, uses oscilator clock */ 2414 /* Delay = ( delay (nano seconds) * oscclk (kHz) )/ 1000 */ 2415 /* SDA brdige delay */ 2416 ext_attr->hi_cfg_bridge_delay = 2417 (u16) ((common_attr->osc_clock_freq / 1000) * HI_I2C_BRIDGE_DELAY) / 2418 1000; 2419 /* Clipping */ 2420 if ((ext_attr->hi_cfg_bridge_delay) > SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) 2421 ext_attr->hi_cfg_bridge_delay = SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M; 2422 /* SCL bridge delay, same as SDA for now */ 2423 ext_attr->hi_cfg_bridge_delay += ((ext_attr->hi_cfg_bridge_delay) << 2424 SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B); 2425 /* Wakeup key, setting the read flag (as suggest in the documentation) does 2426 not always result into a working solution (barebones worked VI2C failed). 2427 Not setting the bit works in all cases . */ 2428 ext_attr->hi_cfg_wake_up_key = DRXJ_WAKE_UP_KEY; 2429 /* port/bridge/power down ctrl */ 2430 ext_attr->hi_cfg_ctrl = (SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE); 2431 /* transit mode time out delay and watch dog divider */ 2432 ext_attr->hi_cfg_transmit = SIO_HI_RA_RAM_PAR_6__PRE; 2433 2434 rc = hi_cfg_command(demod); 2435 if (rc != 0) { 2436 pr_err("error %d\n", rc); 2437 goto rw_error; 2438 } 2439 2440 return 0; 2441 2442 rw_error: 2443 return rc; 2444 } 2445 2446 /*============================================================================*/ 2447 /*== END HOST INTERFACE FUNCTIONS ==*/ 2448 /*============================================================================*/ 2449 2450 /*============================================================================*/ 2451 /*============================================================================*/ 2452 /*== AUXILIARY FUNCTIONS ==*/ 2453 /*============================================================================*/ 2454 /*============================================================================*/ 2455 2456 /* 2457 * \fn int get_device_capabilities() 2458 * \brief Get and store device capabilities. 2459 * \param demod Pointer to demodulator instance. 2460 * \return int. 2461 * \return 0 Success 2462 * \retval -EIO Failure 2463 * 2464 * Depending on pulldowns on MDx pins the following internals are set: 2465 * * common_attr->osc_clock_freq 2466 * * ext_attr->has_lna 2467 * * ext_attr->has_ntsc 2468 * * ext_attr->has_btsc 2469 * * ext_attr->has_oob 2470 * 2471 */ 2472 static int get_device_capabilities(struct drx_demod_instance *demod) 2473 { 2474 struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL); 2475 struct drxj_data *ext_attr = (struct drxj_data *) NULL; 2476 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2477 u16 sio_pdr_ohw_cfg = 0; 2478 u32 sio_top_jtagid_lo = 0; 2479 u16 bid = 0; 2480 int rc; 2481 2482 common_attr = (struct drx_common_attr *) demod->my_common_attr; 2483 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2484 dev_addr = demod->my_i2c_dev_addr; 2485 2486 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 2487 if (rc != 0) { 2488 pr_err("error %d\n", rc); 2489 goto rw_error; 2490 } 2491 rc = drxj_dap_read_reg16(dev_addr, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg, 0); 2492 if (rc != 0) { 2493 pr_err("error %d\n", rc); 2494 goto rw_error; 2495 } 2496 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY__PRE, 0); 2497 if (rc != 0) { 2498 pr_err("error %d\n", rc); 2499 goto rw_error; 2500 } 2501 2502 switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { 2503 case 0: 2504 /* ignore (bypass ?) */ 2505 break; 2506 case 1: 2507 /* 27 MHz */ 2508 common_attr->osc_clock_freq = 27000; 2509 break; 2510 case 2: 2511 /* 20.25 MHz */ 2512 common_attr->osc_clock_freq = 20250; 2513 break; 2514 case 3: 2515 /* 4 MHz */ 2516 common_attr->osc_clock_freq = 4000; 2517 break; 2518 default: 2519 return -EIO; 2520 } 2521 2522 /* 2523 Determine device capabilities 2524 Based on pinning v47 2525 */ 2526 rc = drxdap_fasi_read_reg32(dev_addr, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo, 0); 2527 if (rc != 0) { 2528 pr_err("error %d\n", rc); 2529 goto rw_error; 2530 } 2531 ext_attr->mfx = (u8) ((sio_top_jtagid_lo >> 29) & 0xF); 2532 2533 switch ((sio_top_jtagid_lo >> 12) & 0xFF) { 2534 case 0x31: 2535 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 2536 if (rc != 0) { 2537 pr_err("error %d\n", rc); 2538 goto rw_error; 2539 } 2540 rc = drxj_dap_read_reg16(dev_addr, SIO_PDR_UIO_IN_HI__A, &bid, 0); 2541 if (rc != 0) { 2542 pr_err("error %d\n", rc); 2543 goto rw_error; 2544 } 2545 bid = (bid >> 10) & 0xf; 2546 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY__PRE, 0); 2547 if (rc != 0) { 2548 pr_err("error %d\n", rc); 2549 goto rw_error; 2550 } 2551 2552 ext_attr->has_lna = true; 2553 ext_attr->has_ntsc = false; 2554 ext_attr->has_btsc = false; 2555 ext_attr->has_oob = false; 2556 ext_attr->has_smatx = true; 2557 ext_attr->has_smarx = false; 2558 ext_attr->has_gpio = false; 2559 ext_attr->has_irqn = false; 2560 break; 2561 case 0x33: 2562 ext_attr->has_lna = false; 2563 ext_attr->has_ntsc = false; 2564 ext_attr->has_btsc = false; 2565 ext_attr->has_oob = false; 2566 ext_attr->has_smatx = true; 2567 ext_attr->has_smarx = false; 2568 ext_attr->has_gpio = false; 2569 ext_attr->has_irqn = false; 2570 break; 2571 case 0x45: 2572 ext_attr->has_lna = true; 2573 ext_attr->has_ntsc = true; 2574 ext_attr->has_btsc = false; 2575 ext_attr->has_oob = false; 2576 ext_attr->has_smatx = true; 2577 ext_attr->has_smarx = true; 2578 ext_attr->has_gpio = true; 2579 ext_attr->has_irqn = false; 2580 break; 2581 case 0x46: 2582 ext_attr->has_lna = false; 2583 ext_attr->has_ntsc = true; 2584 ext_attr->has_btsc = false; 2585 ext_attr->has_oob = false; 2586 ext_attr->has_smatx = true; 2587 ext_attr->has_smarx = true; 2588 ext_attr->has_gpio = true; 2589 ext_attr->has_irqn = false; 2590 break; 2591 case 0x41: 2592 ext_attr->has_lna = true; 2593 ext_attr->has_ntsc = true; 2594 ext_attr->has_btsc = true; 2595 ext_attr->has_oob = false; 2596 ext_attr->has_smatx = true; 2597 ext_attr->has_smarx = true; 2598 ext_attr->has_gpio = true; 2599 ext_attr->has_irqn = false; 2600 break; 2601 case 0x43: 2602 ext_attr->has_lna = false; 2603 ext_attr->has_ntsc = true; 2604 ext_attr->has_btsc = true; 2605 ext_attr->has_oob = false; 2606 ext_attr->has_smatx = true; 2607 ext_attr->has_smarx = true; 2608 ext_attr->has_gpio = true; 2609 ext_attr->has_irqn = false; 2610 break; 2611 case 0x32: 2612 ext_attr->has_lna = true; 2613 ext_attr->has_ntsc = false; 2614 ext_attr->has_btsc = false; 2615 ext_attr->has_oob = true; 2616 ext_attr->has_smatx = true; 2617 ext_attr->has_smarx = true; 2618 ext_attr->has_gpio = true; 2619 ext_attr->has_irqn = true; 2620 break; 2621 case 0x34: 2622 ext_attr->has_lna = false; 2623 ext_attr->has_ntsc = true; 2624 ext_attr->has_btsc = true; 2625 ext_attr->has_oob = true; 2626 ext_attr->has_smatx = true; 2627 ext_attr->has_smarx = true; 2628 ext_attr->has_gpio = true; 2629 ext_attr->has_irqn = true; 2630 break; 2631 case 0x42: 2632 ext_attr->has_lna = true; 2633 ext_attr->has_ntsc = true; 2634 ext_attr->has_btsc = true; 2635 ext_attr->has_oob = true; 2636 ext_attr->has_smatx = true; 2637 ext_attr->has_smarx = true; 2638 ext_attr->has_gpio = true; 2639 ext_attr->has_irqn = true; 2640 break; 2641 case 0x44: 2642 ext_attr->has_lna = false; 2643 ext_attr->has_ntsc = true; 2644 ext_attr->has_btsc = true; 2645 ext_attr->has_oob = true; 2646 ext_attr->has_smatx = true; 2647 ext_attr->has_smarx = true; 2648 ext_attr->has_gpio = true; 2649 ext_attr->has_irqn = true; 2650 break; 2651 default: 2652 /* Unknown device variant */ 2653 return -EIO; 2654 break; 2655 } 2656 2657 return 0; 2658 rw_error: 2659 return rc; 2660 } 2661 2662 /* 2663 * \fn int power_up_device() 2664 * \brief Power up device. 2665 * \param demod Pointer to demodulator instance. 2666 * \return int. 2667 * \return 0 Success 2668 * \retval -EIO Failure, I2C or max retries reached 2669 * 2670 */ 2671 2672 #ifndef DRXJ_MAX_RETRIES_POWERUP 2673 #define DRXJ_MAX_RETRIES_POWERUP 10 2674 #endif 2675 2676 static int power_up_device(struct drx_demod_instance *demod) 2677 { 2678 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2679 u8 data = 0; 2680 u16 retry_count = 0; 2681 struct i2c_device_addr wake_up_addr; 2682 2683 dev_addr = demod->my_i2c_dev_addr; 2684 wake_up_addr.i2c_addr = DRXJ_WAKE_UP_KEY; 2685 wake_up_addr.i2c_dev_id = dev_addr->i2c_dev_id; 2686 wake_up_addr.user_data = dev_addr->user_data; 2687 /* 2688 * I2C access may fail in this case: no ack 2689 * dummy write must be used to wake uop device, dummy read must be used to 2690 * reset HI state machine (avoiding actual writes) 2691 */ 2692 do { 2693 data = 0; 2694 drxbsp_i2c_write_read(&wake_up_addr, 1, &data, 2695 (struct i2c_device_addr *)(NULL), 0, 2696 (u8 *)(NULL)); 2697 msleep(10); 2698 retry_count++; 2699 } while ((drxbsp_i2c_write_read 2700 ((struct i2c_device_addr *) (NULL), 0, (u8 *)(NULL), dev_addr, 1, 2701 &data) 2702 != 0) && (retry_count < DRXJ_MAX_RETRIES_POWERUP)); 2703 2704 /* Need some recovery time .... */ 2705 msleep(10); 2706 2707 if (retry_count == DRXJ_MAX_RETRIES_POWERUP) 2708 return -EIO; 2709 2710 return 0; 2711 } 2712 2713 /*----------------------------------------------------------------------------*/ 2714 /* MPEG Output Configuration Functions - begin */ 2715 /*----------------------------------------------------------------------------*/ 2716 /* 2717 * \fn int ctrl_set_cfg_mpeg_output() 2718 * \brief Set MPEG output configuration of the device. 2719 * \param devmod Pointer to demodulator instance. 2720 * \param cfg_data Pointer to mpeg output configuaration. 2721 * \return int. 2722 * 2723 * Configure MPEG output parameters. 2724 * 2725 */ 2726 static int 2727 ctrl_set_cfg_mpeg_output(struct drx_demod_instance *demod, struct drx_cfg_mpeg_output *cfg_data) 2728 { 2729 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 2730 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 2731 struct drx_common_attr *common_attr = (struct drx_common_attr *) (NULL); 2732 int rc; 2733 u16 fec_oc_reg_mode = 0; 2734 u16 fec_oc_reg_ipr_mode = 0; 2735 u16 fec_oc_reg_ipr_invert = 0; 2736 u32 max_bit_rate = 0; 2737 u32 rcn_rate = 0; 2738 u32 nr_bits = 0; 2739 u16 sio_pdr_md_cfg = 0; 2740 /* data mask for the output data byte */ 2741 u16 invert_data_mask = 2742 FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | 2743 FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | 2744 FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | 2745 FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; 2746 2747 /* check arguments */ 2748 if ((demod == NULL) || (cfg_data == NULL)) 2749 return -EINVAL; 2750 2751 dev_addr = demod->my_i2c_dev_addr; 2752 ext_attr = (struct drxj_data *) demod->my_ext_attr; 2753 common_attr = (struct drx_common_attr *) demod->my_common_attr; 2754 2755 if (cfg_data->enable_mpeg_output == true) { 2756 /* quick and dirty patch to set MPEG in case current std is not 2757 producing MPEG */ 2758 switch (ext_attr->standard) { 2759 case DRX_STANDARD_8VSB: 2760 case DRX_STANDARD_ITU_A: 2761 case DRX_STANDARD_ITU_B: 2762 case DRX_STANDARD_ITU_C: 2763 break; 2764 default: 2765 return 0; 2766 } 2767 2768 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_OCR_INVERT__A, 0, 0); 2769 if (rc != 0) { 2770 pr_err("error %d\n", rc); 2771 goto rw_error; 2772 } 2773 switch (ext_attr->standard) { 2774 case DRX_STANDARD_8VSB: 2775 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, 7, 0); 2776 if (rc != 0) { 2777 pr_err("error %d\n", rc); 2778 goto rw_error; 2779 } /* 2048 bytes fifo ram */ 2780 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_CTL_UPD_RATE__A, 10, 0); 2781 if (rc != 0) { 2782 pr_err("error %d\n", rc); 2783 goto rw_error; 2784 } 2785 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_INT_UPD_RATE__A, 10, 0); 2786 if (rc != 0) { 2787 pr_err("error %d\n", rc); 2788 goto rw_error; 2789 } 2790 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_A__A, 5, 0); 2791 if (rc != 0) { 2792 pr_err("error %d\n", rc); 2793 goto rw_error; 2794 } 2795 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_B__A, 7, 0); 2796 if (rc != 0) { 2797 pr_err("error %d\n", rc); 2798 goto rw_error; 2799 } 2800 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, 10, 0); 2801 if (rc != 0) { 2802 pr_err("error %d\n", rc); 2803 goto rw_error; 2804 } 2805 /* Low Water Mark for synchronization */ 2806 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_LWM__A, 3, 0); 2807 if (rc != 0) { 2808 pr_err("error %d\n", rc); 2809 goto rw_error; 2810 } 2811 /* High Water Mark for synchronization */ 2812 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_HWM__A, 5, 0); 2813 if (rc != 0) { 2814 pr_err("error %d\n", rc); 2815 goto rw_error; 2816 } 2817 break; 2818 case DRX_STANDARD_ITU_A: 2819 case DRX_STANDARD_ITU_C: 2820 switch (ext_attr->constellation) { 2821 case DRX_CONSTELLATION_QAM256: 2822 nr_bits = 8; 2823 break; 2824 case DRX_CONSTELLATION_QAM128: 2825 nr_bits = 7; 2826 break; 2827 case DRX_CONSTELLATION_QAM64: 2828 nr_bits = 6; 2829 break; 2830 case DRX_CONSTELLATION_QAM32: 2831 nr_bits = 5; 2832 break; 2833 case DRX_CONSTELLATION_QAM16: 2834 nr_bits = 4; 2835 break; 2836 default: 2837 return -EIO; 2838 } /* ext_attr->constellation */ 2839 /* max_bit_rate = symbol_rate * nr_bits * coef */ 2840 /* coef = 188/204 */ 2841 max_bit_rate = 2842 (ext_attr->curr_symbol_rate / 8) * nr_bits * 188; 2843 fallthrough; /* as b/c Annex A/C need following settings */ 2844 case DRX_STANDARD_ITU_B: 2845 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_USAGE__A, FEC_OC_FCT_USAGE__PRE, 0); 2846 if (rc != 0) { 2847 pr_err("error %d\n", rc); 2848 goto rw_error; 2849 } 2850 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_CTL_UPD_RATE__A, FEC_OC_TMD_CTL_UPD_RATE__PRE, 0); 2851 if (rc != 0) { 2852 pr_err("error %d\n", rc); 2853 goto rw_error; 2854 } 2855 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_TMD_INT_UPD_RATE__A, 5, 0); 2856 if (rc != 0) { 2857 pr_err("error %d\n", rc); 2858 goto rw_error; 2859 } 2860 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_A__A, FEC_OC_AVR_PARM_A__PRE, 0); 2861 if (rc != 0) { 2862 pr_err("error %d\n", rc); 2863 goto rw_error; 2864 } 2865 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_AVR_PARM_B__A, FEC_OC_AVR_PARM_B__PRE, 0); 2866 if (rc != 0) { 2867 pr_err("error %d\n", rc); 2868 goto rw_error; 2869 } 2870 if (cfg_data->static_clk == true) { 2871 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, 0xD, 0); 2872 if (rc != 0) { 2873 pr_err("error %d\n", rc); 2874 goto rw_error; 2875 } 2876 } else { 2877 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_RCN_GAIN__A, FEC_OC_RCN_GAIN__PRE, 0); 2878 if (rc != 0) { 2879 pr_err("error %d\n", rc); 2880 goto rw_error; 2881 } 2882 } 2883 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_LWM__A, 2, 0); 2884 if (rc != 0) { 2885 pr_err("error %d\n", rc); 2886 goto rw_error; 2887 } 2888 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_HWM__A, 12, 0); 2889 if (rc != 0) { 2890 pr_err("error %d\n", rc); 2891 goto rw_error; 2892 } 2893 break; 2894 default: 2895 break; 2896 } /* switch (standard) */ 2897 2898 /* Check insertion of the Reed-Solomon parity bytes */ 2899 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_MODE__A, &fec_oc_reg_mode, 0); 2900 if (rc != 0) { 2901 pr_err("error %d\n", rc); 2902 goto rw_error; 2903 } 2904 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode, 0); 2905 if (rc != 0) { 2906 pr_err("error %d\n", rc); 2907 goto rw_error; 2908 } 2909 if (cfg_data->insert_rs_byte == true) { 2910 /* enable parity symbol forward */ 2911 fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M; 2912 /* MVAL disable during parity bytes */ 2913 fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; 2914 switch (ext_attr->standard) { 2915 case DRX_STANDARD_8VSB: 2916 rcn_rate = 0x004854D3; 2917 break; 2918 case DRX_STANDARD_ITU_B: 2919 fec_oc_reg_mode |= FEC_OC_MODE_TRANSPARENT__M; 2920 switch (ext_attr->constellation) { 2921 case DRX_CONSTELLATION_QAM256: 2922 rcn_rate = 0x008945E7; 2923 break; 2924 case DRX_CONSTELLATION_QAM64: 2925 rcn_rate = 0x005F64D4; 2926 break; 2927 default: 2928 return -EIO; 2929 } 2930 break; 2931 case DRX_STANDARD_ITU_A: 2932 case DRX_STANDARD_ITU_C: 2933 /* insert_rs_byte = true -> coef = 188/188 -> 1, RS bits are in MPEG output */ 2934 rcn_rate = 2935 (frac28 2936 (max_bit_rate, 2937 (u32) (common_attr->sys_clock_freq / 8))) / 2938 188; 2939 break; 2940 default: 2941 return -EIO; 2942 } /* ext_attr->standard */ 2943 } else { /* insert_rs_byte == false */ 2944 2945 /* disable parity symbol forward */ 2946 fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M); 2947 /* MVAL enable during parity bytes */ 2948 fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); 2949 switch (ext_attr->standard) { 2950 case DRX_STANDARD_8VSB: 2951 rcn_rate = 0x0041605C; 2952 break; 2953 case DRX_STANDARD_ITU_B: 2954 fec_oc_reg_mode &= (~FEC_OC_MODE_TRANSPARENT__M); 2955 switch (ext_attr->constellation) { 2956 case DRX_CONSTELLATION_QAM256: 2957 rcn_rate = 0x0082D6A0; 2958 break; 2959 case DRX_CONSTELLATION_QAM64: 2960 rcn_rate = 0x005AEC1A; 2961 break; 2962 default: 2963 return -EIO; 2964 } 2965 break; 2966 case DRX_STANDARD_ITU_A: 2967 case DRX_STANDARD_ITU_C: 2968 /* insert_rs_byte = false -> coef = 188/204, RS bits not in MPEG output */ 2969 rcn_rate = 2970 (frac28 2971 (max_bit_rate, 2972 (u32) (common_attr->sys_clock_freq / 8))) / 2973 204; 2974 break; 2975 default: 2976 return -EIO; 2977 } /* ext_attr->standard */ 2978 } 2979 2980 if (cfg_data->enable_parallel == true) { /* MPEG data output is parallel -> clear ipr_mode[0] */ 2981 fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); 2982 } else { /* MPEG data output is serial -> set ipr_mode[0] */ 2983 fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M; 2984 } 2985 2986 /* Control slective inversion of output bits */ 2987 if (cfg_data->invert_data == true) 2988 fec_oc_reg_ipr_invert |= invert_data_mask; 2989 else 2990 fec_oc_reg_ipr_invert &= (~(invert_data_mask)); 2991 2992 if (cfg_data->invert_err == true) 2993 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M; 2994 else 2995 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M)); 2996 2997 if (cfg_data->invert_str == true) 2998 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M; 2999 else 3000 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); 3001 3002 if (cfg_data->invert_val == true) 3003 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M; 3004 else 3005 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); 3006 3007 if (cfg_data->invert_clk == true) 3008 fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M; 3009 else 3010 fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); 3011 3012 3013 if (cfg_data->static_clk == true) { /* Static mode */ 3014 u32 dto_rate = 0; 3015 u32 bit_rate = 0; 3016 u16 fec_oc_dto_burst_len = 0; 3017 u16 fec_oc_dto_period = 0; 3018 3019 fec_oc_dto_burst_len = FEC_OC_DTO_BURST_LEN__PRE; 3020 3021 switch (ext_attr->standard) { 3022 case DRX_STANDARD_8VSB: 3023 fec_oc_dto_period = 4; 3024 if (cfg_data->insert_rs_byte == true) 3025 fec_oc_dto_burst_len = 208; 3026 break; 3027 case DRX_STANDARD_ITU_A: 3028 { 3029 u32 symbol_rate_th = 6400000; 3030 if (cfg_data->insert_rs_byte == true) { 3031 fec_oc_dto_burst_len = 204; 3032 symbol_rate_th = 5900000; 3033 } 3034 if (ext_attr->curr_symbol_rate >= 3035 symbol_rate_th) { 3036 fec_oc_dto_period = 0; 3037 } else { 3038 fec_oc_dto_period = 1; 3039 } 3040 } 3041 break; 3042 case DRX_STANDARD_ITU_B: 3043 fec_oc_dto_period = 1; 3044 if (cfg_data->insert_rs_byte == true) 3045 fec_oc_dto_burst_len = 128; 3046 break; 3047 case DRX_STANDARD_ITU_C: 3048 fec_oc_dto_period = 1; 3049 if (cfg_data->insert_rs_byte == true) 3050 fec_oc_dto_burst_len = 204; 3051 break; 3052 default: 3053 return -EIO; 3054 } 3055 bit_rate = 3056 common_attr->sys_clock_freq * 1000 / (fec_oc_dto_period + 3057 2); 3058 dto_rate = 3059 frac28(bit_rate, common_attr->sys_clock_freq * 1000); 3060 dto_rate >>= 3; 3061 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_RATE_HI__A, (u16)((dto_rate >> 16) & FEC_OC_DTO_RATE_HI__M), 0); 3062 if (rc != 0) { 3063 pr_err("error %d\n", rc); 3064 goto rw_error; 3065 } 3066 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_RATE_LO__A, (u16)(dto_rate & FEC_OC_DTO_RATE_LO_RATE_LO__M), 0); 3067 if (rc != 0) { 3068 pr_err("error %d\n", rc); 3069 goto rw_error; 3070 } 3071 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_MODE__A, FEC_OC_DTO_MODE_DYNAMIC__M | FEC_OC_DTO_MODE_OFFSET_ENABLE__M, 0); 3072 if (rc != 0) { 3073 pr_err("error %d\n", rc); 3074 goto rw_error; 3075 } 3076 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_MODE__A, FEC_OC_FCT_MODE_RAT_ENA__M | FEC_OC_FCT_MODE_VIRT_ENA__M, 0); 3077 if (rc != 0) { 3078 pr_err("error %d\n", rc); 3079 goto rw_error; 3080 } 3081 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len, 0); 3082 if (rc != 0) { 3083 pr_err("error %d\n", rc); 3084 goto rw_error; 3085 } 3086 if (ext_attr->mpeg_output_clock_rate != DRXJ_MPEGOUTPUT_CLOCK_RATE_AUTO) 3087 fec_oc_dto_period = ext_attr->mpeg_output_clock_rate - 1; 3088 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period, 0); 3089 if (rc != 0) { 3090 pr_err("error %d\n", rc); 3091 goto rw_error; 3092 } 3093 } else { /* Dynamic mode */ 3094 3095 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DTO_MODE__A, FEC_OC_DTO_MODE_DYNAMIC__M, 0); 3096 if (rc != 0) { 3097 pr_err("error %d\n", rc); 3098 goto rw_error; 3099 } 3100 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_FCT_MODE__A, 0, 0); 3101 if (rc != 0) { 3102 pr_err("error %d\n", rc); 3103 goto rw_error; 3104 } 3105 } 3106 3107 rc = drxdap_fasi_write_reg32(dev_addr, FEC_OC_RCN_CTL_RATE_LO__A, rcn_rate, 0); 3108 if (rc != 0) { 3109 pr_err("error %d\n", rc); 3110 goto rw_error; 3111 } 3112 3113 /* Write appropriate registers with requested configuration */ 3114 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_MODE__A, fec_oc_reg_mode, 0); 3115 if (rc != 0) { 3116 pr_err("error %d\n", rc); 3117 goto rw_error; 3118 } 3119 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode, 0); 3120 if (rc != 0) { 3121 pr_err("error %d\n", rc); 3122 goto rw_error; 3123 } 3124 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert, 0); 3125 if (rc != 0) { 3126 pr_err("error %d\n", rc); 3127 goto rw_error; 3128 } 3129 3130 /* enabling for both parallel and serial now */ 3131 /* Write magic word to enable pdr reg write */ 3132 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0); 3133 if (rc != 0) { 3134 pr_err("error %d\n", rc); 3135 goto rw_error; 3136 } 3137 /* Set MPEG TS pads to outputmode */ 3138 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MSTRT_CFG__A, 0x0013, 0); 3139 if (rc != 0) { 3140 pr_err("error %d\n", rc); 3141 goto rw_error; 3142 } 3143 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MERR_CFG__A, 0x0013, 0); 3144 if (rc != 0) { 3145 pr_err("error %d\n", rc); 3146 goto rw_error; 3147 } 3148 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MCLK_CFG__A, MPEG_OUTPUT_CLK_DRIVE_STRENGTH << SIO_PDR_MCLK_CFG_DRIVE__B | 0x03 << SIO_PDR_MCLK_CFG_MODE__B, 0); 3149 if (rc != 0) { 3150 pr_err("error %d\n", rc); 3151 goto rw_error; 3152 } 3153 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MVAL_CFG__A, 0x0013, 0); 3154 if (rc != 0) { 3155 pr_err("error %d\n", rc); 3156 goto rw_error; 3157 } 3158 sio_pdr_md_cfg = 3159 MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH << 3160 SIO_PDR_MD0_CFG_DRIVE__B | 0x03 << SIO_PDR_MD0_CFG_MODE__B; 3161 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, sio_pdr_md_cfg, 0); 3162 if (rc != 0) { 3163 pr_err("error %d\n", rc); 3164 goto rw_error; 3165 } 3166 if (cfg_data->enable_parallel == true) { /* MPEG data output is parallel -> set MD1 to MD7 to output mode */ 3167 sio_pdr_md_cfg = 3168 MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH << 3169 SIO_PDR_MD0_CFG_DRIVE__B | 0x03 << 3170 SIO_PDR_MD0_CFG_MODE__B; 3171 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, sio_pdr_md_cfg, 0); 3172 if (rc != 0) { 3173 pr_err("error %d\n", rc); 3174 goto rw_error; 3175 } 3176 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, sio_pdr_md_cfg, 0); 3177 if (rc != 0) { 3178 pr_err("error %d\n", rc); 3179 goto rw_error; 3180 } 3181 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, sio_pdr_md_cfg, 0); 3182 if (rc != 0) { 3183 pr_err("error %d\n", rc); 3184 goto rw_error; 3185 } 3186 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, sio_pdr_md_cfg, 0); 3187 if (rc != 0) { 3188 pr_err("error %d\n", rc); 3189 goto rw_error; 3190 } 3191 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, sio_pdr_md_cfg, 0); 3192 if (rc != 0) { 3193 pr_err("error %d\n", rc); 3194 goto rw_error; 3195 } 3196 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, sio_pdr_md_cfg, 0); 3197 if (rc != 0) { 3198 pr_err("error %d\n", rc); 3199 goto rw_error; 3200 } 3201 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, sio_pdr_md_cfg, 0); 3202 if (rc != 0) { 3203 pr_err("error %d\n", rc); 3204 goto rw_error; 3205 } 3206 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, sio_pdr_md_cfg, 0); 3207 if (rc != 0) { 3208 pr_err("error %d\n", rc); 3209 goto rw_error; 3210 } 3211 } else { /* MPEG data output is serial -> set MD1 to MD7 to tri-state */ 3212 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, 0x0000, 0); 3213 if (rc != 0) { 3214 pr_err("error %d\n", rc); 3215 goto rw_error; 3216 } 3217 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, 0x0000, 0); 3218 if (rc != 0) { 3219 pr_err("error %d\n", rc); 3220 goto rw_error; 3221 } 3222 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, 0x0000, 0); 3223 if (rc != 0) { 3224 pr_err("error %d\n", rc); 3225 goto rw_error; 3226 } 3227 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, 0x0000, 0); 3228 if (rc != 0) { 3229 pr_err("error %d\n", rc); 3230 goto rw_error; 3231 } 3232 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, 0x0000, 0); 3233 if (rc != 0) { 3234 pr_err("error %d\n", rc); 3235 goto rw_error; 3236 } 3237 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, 0x0000, 0); 3238 if (rc != 0) { 3239 pr_err("error %d\n", rc); 3240 goto rw_error; 3241 } 3242 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, 0x0000, 0); 3243 if (rc != 0) { 3244 pr_err("error %d\n", rc); 3245 goto rw_error; 3246 } 3247 } 3248 /* Enable Monitor Bus output over MPEG pads and ctl input */ 3249 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MON_CFG__A, 0x0000, 0); 3250 if (rc != 0) { 3251 pr_err("error %d\n", rc); 3252 goto rw_error; 3253 } 3254 /* Write nomagic word to enable pdr reg write */ 3255 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3256 if (rc != 0) { 3257 pr_err("error %d\n", rc); 3258 goto rw_error; 3259 } 3260 } else { 3261 /* Write magic word to enable pdr reg write */ 3262 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0); 3263 if (rc != 0) { 3264 pr_err("error %d\n", rc); 3265 goto rw_error; 3266 } 3267 /* Set MPEG TS pads to inputmode */ 3268 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MSTRT_CFG__A, 0x0000, 0); 3269 if (rc != 0) { 3270 pr_err("error %d\n", rc); 3271 goto rw_error; 3272 } 3273 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MERR_CFG__A, 0x0000, 0); 3274 if (rc != 0) { 3275 pr_err("error %d\n", rc); 3276 goto rw_error; 3277 } 3278 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MCLK_CFG__A, 0x0000, 0); 3279 if (rc != 0) { 3280 pr_err("error %d\n", rc); 3281 goto rw_error; 3282 } 3283 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MVAL_CFG__A, 0x0000, 0); 3284 if (rc != 0) { 3285 pr_err("error %d\n", rc); 3286 goto rw_error; 3287 } 3288 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD0_CFG__A, 0x0000, 0); 3289 if (rc != 0) { 3290 pr_err("error %d\n", rc); 3291 goto rw_error; 3292 } 3293 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD1_CFG__A, 0x0000, 0); 3294 if (rc != 0) { 3295 pr_err("error %d\n", rc); 3296 goto rw_error; 3297 } 3298 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD2_CFG__A, 0x0000, 0); 3299 if (rc != 0) { 3300 pr_err("error %d\n", rc); 3301 goto rw_error; 3302 } 3303 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD3_CFG__A, 0x0000, 0); 3304 if (rc != 0) { 3305 pr_err("error %d\n", rc); 3306 goto rw_error; 3307 } 3308 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD4_CFG__A, 0x0000, 0); 3309 if (rc != 0) { 3310 pr_err("error %d\n", rc); 3311 goto rw_error; 3312 } 3313 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD5_CFG__A, 0x0000, 0); 3314 if (rc != 0) { 3315 pr_err("error %d\n", rc); 3316 goto rw_error; 3317 } 3318 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD6_CFG__A, 0x0000, 0); 3319 if (rc != 0) { 3320 pr_err("error %d\n", rc); 3321 goto rw_error; 3322 } 3323 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MD7_CFG__A, 0x0000, 0); 3324 if (rc != 0) { 3325 pr_err("error %d\n", rc); 3326 goto rw_error; 3327 } 3328 /* Enable Monitor Bus output over MPEG pads and ctl input */ 3329 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_MON_CFG__A, 0x0000, 0); 3330 if (rc != 0) { 3331 pr_err("error %d\n", rc); 3332 goto rw_error; 3333 } 3334 /* Write nomagic word to enable pdr reg write */ 3335 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3336 if (rc != 0) { 3337 pr_err("error %d\n", rc); 3338 goto rw_error; 3339 } 3340 } 3341 3342 /* save values for restore after re-acquire */ 3343 common_attr->mpeg_cfg.enable_mpeg_output = cfg_data->enable_mpeg_output; 3344 3345 return 0; 3346 rw_error: 3347 return rc; 3348 } 3349 3350 /*----------------------------------------------------------------------------*/ 3351 3352 3353 /*----------------------------------------------------------------------------*/ 3354 /* MPEG Output Configuration Functions - end */ 3355 /*----------------------------------------------------------------------------*/ 3356 3357 /*----------------------------------------------------------------------------*/ 3358 /* miscellaneous configurations - begin */ 3359 /*----------------------------------------------------------------------------*/ 3360 3361 /* 3362 * \fn int set_mpegtei_handling() 3363 * \brief Activate MPEG TEI handling settings. 3364 * \param devmod Pointer to demodulator instance. 3365 * \return int. 3366 * 3367 * This routine should be called during a set channel of QAM/VSB 3368 * 3369 */ 3370 static int set_mpegtei_handling(struct drx_demod_instance *demod) 3371 { 3372 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3373 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 3374 int rc; 3375 u16 fec_oc_dpr_mode = 0; 3376 u16 fec_oc_snc_mode = 0; 3377 u16 fec_oc_ems_mode = 0; 3378 3379 dev_addr = demod->my_i2c_dev_addr; 3380 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3381 3382 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_DPR_MODE__A, &fec_oc_dpr_mode, 0); 3383 if (rc != 0) { 3384 pr_err("error %d\n", rc); 3385 goto rw_error; 3386 } 3387 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode, 0); 3388 if (rc != 0) { 3389 pr_err("error %d\n", rc); 3390 goto rw_error; 3391 } 3392 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_EMS_MODE__A, &fec_oc_ems_mode, 0); 3393 if (rc != 0) { 3394 pr_err("error %d\n", rc); 3395 goto rw_error; 3396 } 3397 3398 /* reset to default, allow TEI bit to be changed */ 3399 fec_oc_dpr_mode &= (~FEC_OC_DPR_MODE_ERR_DISABLE__M); 3400 fec_oc_snc_mode &= (~(FEC_OC_SNC_MODE_ERROR_CTL__M | 3401 FEC_OC_SNC_MODE_CORR_DISABLE__M)); 3402 fec_oc_ems_mode &= (~FEC_OC_EMS_MODE_MODE__M); 3403 3404 if (ext_attr->disable_te_ihandling) { 3405 /* do not change TEI bit */ 3406 fec_oc_dpr_mode |= FEC_OC_DPR_MODE_ERR_DISABLE__M; 3407 fec_oc_snc_mode |= FEC_OC_SNC_MODE_CORR_DISABLE__M | 3408 ((0x2) << (FEC_OC_SNC_MODE_ERROR_CTL__B)); 3409 fec_oc_ems_mode |= ((0x01) << (FEC_OC_EMS_MODE_MODE__B)); 3410 } 3411 3412 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_DPR_MODE__A, fec_oc_dpr_mode, 0); 3413 if (rc != 0) { 3414 pr_err("error %d\n", rc); 3415 goto rw_error; 3416 } 3417 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_MODE__A, fec_oc_snc_mode, 0); 3418 if (rc != 0) { 3419 pr_err("error %d\n", rc); 3420 goto rw_error; 3421 } 3422 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_EMS_MODE__A, fec_oc_ems_mode, 0); 3423 if (rc != 0) { 3424 pr_err("error %d\n", rc); 3425 goto rw_error; 3426 } 3427 3428 return 0; 3429 rw_error: 3430 return rc; 3431 } 3432 3433 /*----------------------------------------------------------------------------*/ 3434 /* 3435 * \fn int bit_reverse_mpeg_output() 3436 * \brief Set MPEG output bit-endian settings. 3437 * \param devmod Pointer to demodulator instance. 3438 * \return int. 3439 * 3440 * This routine should be called during a set channel of QAM/VSB 3441 * 3442 */ 3443 static int bit_reverse_mpeg_output(struct drx_demod_instance *demod) 3444 { 3445 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3446 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 3447 int rc; 3448 u16 fec_oc_ipr_mode = 0; 3449 3450 dev_addr = demod->my_i2c_dev_addr; 3451 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3452 3453 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_IPR_MODE__A, &fec_oc_ipr_mode, 0); 3454 if (rc != 0) { 3455 pr_err("error %d\n", rc); 3456 goto rw_error; 3457 } 3458 3459 /* reset to default (normal bit order) */ 3460 fec_oc_ipr_mode &= (~FEC_OC_IPR_MODE_REVERSE_ORDER__M); 3461 3462 if (ext_attr->bit_reverse_mpeg_outout) 3463 fec_oc_ipr_mode |= FEC_OC_IPR_MODE_REVERSE_ORDER__M; 3464 3465 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_IPR_MODE__A, fec_oc_ipr_mode, 0); 3466 if (rc != 0) { 3467 pr_err("error %d\n", rc); 3468 goto rw_error; 3469 } 3470 3471 return 0; 3472 rw_error: 3473 return rc; 3474 } 3475 3476 /*----------------------------------------------------------------------------*/ 3477 /* 3478 * \fn int set_mpeg_start_width() 3479 * \brief Set MPEG start width. 3480 * \param devmod Pointer to demodulator instance. 3481 * \return int. 3482 * 3483 * This routine should be called during a set channel of QAM/VSB 3484 * 3485 */ 3486 static int set_mpeg_start_width(struct drx_demod_instance *demod) 3487 { 3488 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3489 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)(NULL); 3490 struct drx_common_attr *common_attr = (struct drx_common_attr *) NULL; 3491 int rc; 3492 u16 fec_oc_comm_mb = 0; 3493 3494 dev_addr = demod->my_i2c_dev_addr; 3495 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3496 common_attr = demod->my_common_attr; 3497 3498 if ((common_attr->mpeg_cfg.static_clk == true) 3499 && (common_attr->mpeg_cfg.enable_parallel == false)) { 3500 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_COMM_MB__A, &fec_oc_comm_mb, 0); 3501 if (rc != 0) { 3502 pr_err("error %d\n", rc); 3503 goto rw_error; 3504 } 3505 fec_oc_comm_mb &= ~FEC_OC_COMM_MB_CTL_ON; 3506 if (ext_attr->mpeg_start_width == DRXJ_MPEG_START_WIDTH_8CLKCYC) 3507 fec_oc_comm_mb |= FEC_OC_COMM_MB_CTL_ON; 3508 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_COMM_MB__A, fec_oc_comm_mb, 0); 3509 if (rc != 0) { 3510 pr_err("error %d\n", rc); 3511 goto rw_error; 3512 } 3513 } 3514 3515 return 0; 3516 rw_error: 3517 return rc; 3518 } 3519 3520 /*----------------------------------------------------------------------------*/ 3521 /* miscellaneous configurations - end */ 3522 /*----------------------------------------------------------------------------*/ 3523 3524 /*----------------------------------------------------------------------------*/ 3525 /* UIO Configuration Functions - begin */ 3526 /*----------------------------------------------------------------------------*/ 3527 /* 3528 * \fn int ctrl_set_uio_cfg() 3529 * \brief Configure modus oprandi UIO. 3530 * \param demod Pointer to demodulator instance. 3531 * \param uio_cfg Pointer to a configuration setting for a certain UIO. 3532 * \return int. 3533 */ 3534 static int ctrl_set_uio_cfg(struct drx_demod_instance *demod, struct drxuio_cfg *uio_cfg) 3535 { 3536 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3537 int rc; 3538 3539 if ((uio_cfg == NULL) || (demod == NULL)) 3540 return -EINVAL; 3541 3542 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3543 3544 /* Write magic word to enable pdr reg write */ 3545 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 3546 if (rc != 0) { 3547 pr_err("error %d\n", rc); 3548 goto rw_error; 3549 } 3550 switch (uio_cfg->uio) { 3551 /*====================================================================*/ 3552 case DRX_UIO1: 3553 /* DRX_UIO1: SMA_TX UIO-1 */ 3554 if (!ext_attr->has_smatx) 3555 return -EIO; 3556 switch (uio_cfg->mode) { 3557 case DRX_UIO_MODE_FIRMWARE_SMA: 3558 case DRX_UIO_MODE_FIRMWARE_SAW: 3559 case DRX_UIO_MODE_READWRITE: 3560 ext_attr->uio_sma_tx_mode = uio_cfg->mode; 3561 break; 3562 case DRX_UIO_MODE_DISABLE: 3563 ext_attr->uio_sma_tx_mode = uio_cfg->mode; 3564 /* pad configuration register is set 0 - input mode */ 3565 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_CFG__A, 0, 0); 3566 if (rc != 0) { 3567 pr_err("error %d\n", rc); 3568 goto rw_error; 3569 } 3570 break; 3571 default: 3572 return -EINVAL; 3573 } /* switch ( uio_cfg->mode ) */ 3574 break; 3575 /*====================================================================*/ 3576 case DRX_UIO2: 3577 /* DRX_UIO2: SMA_RX UIO-2 */ 3578 if (!ext_attr->has_smarx) 3579 return -EIO; 3580 switch (uio_cfg->mode) { 3581 case DRX_UIO_MODE_FIRMWARE0: 3582 case DRX_UIO_MODE_READWRITE: 3583 ext_attr->uio_sma_rx_mode = uio_cfg->mode; 3584 break; 3585 case DRX_UIO_MODE_DISABLE: 3586 ext_attr->uio_sma_rx_mode = uio_cfg->mode; 3587 /* pad configuration register is set 0 - input mode */ 3588 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_RX_CFG__A, 0, 0); 3589 if (rc != 0) { 3590 pr_err("error %d\n", rc); 3591 goto rw_error; 3592 } 3593 break; 3594 default: 3595 return -EINVAL; 3596 } /* switch ( uio_cfg->mode ) */ 3597 break; 3598 /*====================================================================*/ 3599 case DRX_UIO3: 3600 /* DRX_UIO3: GPIO UIO-3 */ 3601 if (!ext_attr->has_gpio) 3602 return -EIO; 3603 switch (uio_cfg->mode) { 3604 case DRX_UIO_MODE_FIRMWARE0: 3605 case DRX_UIO_MODE_READWRITE: 3606 ext_attr->uio_gpio_mode = uio_cfg->mode; 3607 break; 3608 case DRX_UIO_MODE_DISABLE: 3609 ext_attr->uio_gpio_mode = uio_cfg->mode; 3610 /* pad configuration register is set 0 - input mode */ 3611 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_GPIO_CFG__A, 0, 0); 3612 if (rc != 0) { 3613 pr_err("error %d\n", rc); 3614 goto rw_error; 3615 } 3616 break; 3617 default: 3618 return -EINVAL; 3619 } /* switch ( uio_cfg->mode ) */ 3620 break; 3621 /*====================================================================*/ 3622 case DRX_UIO4: 3623 /* DRX_UIO4: IRQN UIO-4 */ 3624 if (!ext_attr->has_irqn) 3625 return -EIO; 3626 switch (uio_cfg->mode) { 3627 case DRX_UIO_MODE_READWRITE: 3628 ext_attr->uio_irqn_mode = uio_cfg->mode; 3629 break; 3630 case DRX_UIO_MODE_DISABLE: 3631 /* pad configuration register is set 0 - input mode */ 3632 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_IRQN_CFG__A, 0, 0); 3633 if (rc != 0) { 3634 pr_err("error %d\n", rc); 3635 goto rw_error; 3636 } 3637 ext_attr->uio_irqn_mode = uio_cfg->mode; 3638 break; 3639 case DRX_UIO_MODE_FIRMWARE0: 3640 default: 3641 return -EINVAL; 3642 } /* switch ( uio_cfg->mode ) */ 3643 break; 3644 /*====================================================================*/ 3645 default: 3646 return -EINVAL; 3647 } /* switch ( uio_cfg->uio ) */ 3648 3649 /* Write magic word to disable pdr reg write */ 3650 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3651 if (rc != 0) { 3652 pr_err("error %d\n", rc); 3653 goto rw_error; 3654 } 3655 3656 return 0; 3657 rw_error: 3658 return rc; 3659 } 3660 3661 /* 3662 * \fn int ctrl_uio_write() 3663 * \brief Write to a UIO. 3664 * \param demod Pointer to demodulator instance. 3665 * \param uio_data Pointer to data container for a certain UIO. 3666 * \return int. 3667 */ 3668 static int 3669 ctrl_uio_write(struct drx_demod_instance *demod, struct drxuio_data *uio_data) 3670 { 3671 struct drxj_data *ext_attr = (struct drxj_data *) (NULL); 3672 int rc; 3673 u16 pin_cfg_value = 0; 3674 u16 value = 0; 3675 3676 if ((uio_data == NULL) || (demod == NULL)) 3677 return -EINVAL; 3678 3679 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3680 3681 /* Write magic word to enable pdr reg write */ 3682 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 3683 if (rc != 0) { 3684 pr_err("error %d\n", rc); 3685 goto rw_error; 3686 } 3687 switch (uio_data->uio) { 3688 /*====================================================================*/ 3689 case DRX_UIO1: 3690 /* DRX_UIO1: SMA_TX UIO-1 */ 3691 if (!ext_attr->has_smatx) 3692 return -EIO; 3693 if ((ext_attr->uio_sma_tx_mode != DRX_UIO_MODE_READWRITE) 3694 && (ext_attr->uio_sma_tx_mode != DRX_UIO_MODE_FIRMWARE_SAW)) { 3695 return -EIO; 3696 } 3697 pin_cfg_value = 0; 3698 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3699 pin_cfg_value |= 0x0113; 3700 /* io_pad_cfg_mode output mode is drive always */ 3701 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3702 3703 /* write to io pad configuration register - output mode */ 3704 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_CFG__A, pin_cfg_value, 0); 3705 if (rc != 0) { 3706 pr_err("error %d\n", rc); 3707 goto rw_error; 3708 } 3709 3710 /* use corresponding bit in io data output registar */ 3711 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, &value, 0); 3712 if (rc != 0) { 3713 pr_err("error %d\n", rc); 3714 goto rw_error; 3715 } 3716 if (!uio_data->value) 3717 value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */ 3718 else 3719 value |= 0x8000; /* write one to 15th bit - 1st UIO */ 3720 3721 /* write back to io data output register */ 3722 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, value, 0); 3723 if (rc != 0) { 3724 pr_err("error %d\n", rc); 3725 goto rw_error; 3726 } 3727 break; 3728 /*======================================================================*/ 3729 case DRX_UIO2: 3730 /* DRX_UIO2: SMA_RX UIO-2 */ 3731 if (!ext_attr->has_smarx) 3732 return -EIO; 3733 if (ext_attr->uio_sma_rx_mode != DRX_UIO_MODE_READWRITE) 3734 return -EIO; 3735 3736 pin_cfg_value = 0; 3737 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3738 pin_cfg_value |= 0x0113; 3739 /* io_pad_cfg_mode output mode is drive always */ 3740 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3741 3742 /* write to io pad configuration register - output mode */ 3743 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_RX_CFG__A, pin_cfg_value, 0); 3744 if (rc != 0) { 3745 pr_err("error %d\n", rc); 3746 goto rw_error; 3747 } 3748 3749 /* use corresponding bit in io data output registar */ 3750 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, &value, 0); 3751 if (rc != 0) { 3752 pr_err("error %d\n", rc); 3753 goto rw_error; 3754 } 3755 if (!uio_data->value) 3756 value &= 0xBFFF; /* write zero to 14th bit - 2nd UIO */ 3757 else 3758 value |= 0x4000; /* write one to 14th bit - 2nd UIO */ 3759 3760 /* write back to io data output register */ 3761 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, value, 0); 3762 if (rc != 0) { 3763 pr_err("error %d\n", rc); 3764 goto rw_error; 3765 } 3766 break; 3767 /*====================================================================*/ 3768 case DRX_UIO3: 3769 /* DRX_UIO3: ASEL UIO-3 */ 3770 if (!ext_attr->has_gpio) 3771 return -EIO; 3772 if (ext_attr->uio_gpio_mode != DRX_UIO_MODE_READWRITE) 3773 return -EIO; 3774 3775 pin_cfg_value = 0; 3776 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3777 pin_cfg_value |= 0x0113; 3778 /* io_pad_cfg_mode output mode is drive always */ 3779 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3780 3781 /* write to io pad configuration register - output mode */ 3782 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_GPIO_CFG__A, pin_cfg_value, 0); 3783 if (rc != 0) { 3784 pr_err("error %d\n", rc); 3785 goto rw_error; 3786 } 3787 3788 /* use corresponding bit in io data output registar */ 3789 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_HI__A, &value, 0); 3790 if (rc != 0) { 3791 pr_err("error %d\n", rc); 3792 goto rw_error; 3793 } 3794 if (!uio_data->value) 3795 value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */ 3796 else 3797 value |= 0x0004; /* write one to 2nd bit - 3rd UIO */ 3798 3799 /* write back to io data output register */ 3800 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_HI__A, value, 0); 3801 if (rc != 0) { 3802 pr_err("error %d\n", rc); 3803 goto rw_error; 3804 } 3805 break; 3806 /*=====================================================================*/ 3807 case DRX_UIO4: 3808 /* DRX_UIO4: IRQN UIO-4 */ 3809 if (!ext_attr->has_irqn) 3810 return -EIO; 3811 3812 if (ext_attr->uio_irqn_mode != DRX_UIO_MODE_READWRITE) 3813 return -EIO; 3814 3815 pin_cfg_value = 0; 3816 /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ 3817 pin_cfg_value |= 0x0113; 3818 /* io_pad_cfg_mode output mode is drive always */ 3819 /* io_pad_cfg_drive is set to power 2 (23 mA) */ 3820 3821 /* write to io pad configuration register - output mode */ 3822 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_IRQN_CFG__A, pin_cfg_value, 0); 3823 if (rc != 0) { 3824 pr_err("error %d\n", rc); 3825 goto rw_error; 3826 } 3827 3828 /* use corresponding bit in io data output registar */ 3829 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, &value, 0); 3830 if (rc != 0) { 3831 pr_err("error %d\n", rc); 3832 goto rw_error; 3833 } 3834 if (uio_data->value == false) 3835 value &= 0xEFFF; /* write zero to 12th bit - 4th UIO */ 3836 else 3837 value |= 0x1000; /* write one to 12th bit - 4th UIO */ 3838 3839 /* write back to io data output register */ 3840 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_UIO_OUT_LO__A, value, 0); 3841 if (rc != 0) { 3842 pr_err("error %d\n", rc); 3843 goto rw_error; 3844 } 3845 break; 3846 /*=====================================================================*/ 3847 default: 3848 return -EINVAL; 3849 } /* switch ( uio_data->uio ) */ 3850 3851 /* Write magic word to disable pdr reg write */ 3852 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3853 if (rc != 0) { 3854 pr_err("error %d\n", rc); 3855 goto rw_error; 3856 } 3857 3858 return 0; 3859 rw_error: 3860 return rc; 3861 } 3862 3863 /*---------------------------------------------------------------------------*/ 3864 /* UIO Configuration Functions - end */ 3865 /*---------------------------------------------------------------------------*/ 3866 3867 /*----------------------------------------------------------------------------*/ 3868 /* I2C Bridge Functions - begin */ 3869 /*----------------------------------------------------------------------------*/ 3870 /* 3871 * \fn int ctrl_i2c_bridge() 3872 * \brief Open or close the I2C switch to tuner. 3873 * \param demod Pointer to demodulator instance. 3874 * \param bridge_closed Pointer to bool indication if bridge is closed not. 3875 * \return int. 3876 3877 */ 3878 static int 3879 ctrl_i2c_bridge(struct drx_demod_instance *demod, bool *bridge_closed) 3880 { 3881 struct drxj_hi_cmd hi_cmd; 3882 u16 result = 0; 3883 3884 /* check arguments */ 3885 if (bridge_closed == NULL) 3886 return -EINVAL; 3887 3888 hi_cmd.cmd = SIO_HI_RA_RAM_CMD_BRDCTRL; 3889 hi_cmd.param1 = SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY; 3890 if (*bridge_closed) 3891 hi_cmd.param2 = SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED; 3892 else 3893 hi_cmd.param2 = SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN; 3894 3895 return hi_command(demod->my_i2c_dev_addr, &hi_cmd, &result); 3896 } 3897 3898 /*----------------------------------------------------------------------------*/ 3899 /* I2C Bridge Functions - end */ 3900 /*----------------------------------------------------------------------------*/ 3901 3902 /*----------------------------------------------------------------------------*/ 3903 /* Smart antenna Functions - begin */ 3904 /*----------------------------------------------------------------------------*/ 3905 /* 3906 * \fn int smart_ant_init() 3907 * \brief Initialize Smart Antenna. 3908 * \param pointer to struct drx_demod_instance. 3909 * \return int. 3910 * 3911 */ 3912 static int smart_ant_init(struct drx_demod_instance *demod) 3913 { 3914 struct drxj_data *ext_attr = NULL; 3915 struct i2c_device_addr *dev_addr = NULL; 3916 struct drxuio_cfg uio_cfg = { DRX_UIO1, DRX_UIO_MODE_FIRMWARE_SMA }; 3917 int rc; 3918 u16 data = 0; 3919 3920 dev_addr = demod->my_i2c_dev_addr; 3921 ext_attr = (struct drxj_data *) demod->my_ext_attr; 3922 3923 /* Write magic word to enable pdr reg write */ 3924 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY, 0); 3925 if (rc != 0) { 3926 pr_err("error %d\n", rc); 3927 goto rw_error; 3928 } 3929 /* init smart antenna */ 3930 rc = drxj_dap_read_reg16(dev_addr, SIO_SA_TX_COMMAND__A, &data, 0); 3931 if (rc != 0) { 3932 pr_err("error %d\n", rc); 3933 goto rw_error; 3934 } 3935 if (ext_attr->smart_ant_inverted) { 3936 rc = drxj_dap_write_reg16(dev_addr, SIO_SA_TX_COMMAND__A, (data | SIO_SA_TX_COMMAND_TX_INVERT__M) | SIO_SA_TX_COMMAND_TX_ENABLE__M, 0); 3937 if (rc != 0) { 3938 pr_err("error %d\n", rc); 3939 goto rw_error; 3940 } 3941 } else { 3942 rc = drxj_dap_write_reg16(dev_addr, SIO_SA_TX_COMMAND__A, (data & (~SIO_SA_TX_COMMAND_TX_INVERT__M)) | SIO_SA_TX_COMMAND_TX_ENABLE__M, 0); 3943 if (rc != 0) { 3944 pr_err("error %d\n", rc); 3945 goto rw_error; 3946 } 3947 } 3948 3949 /* config SMA_TX pin to smart antenna mode */ 3950 rc = ctrl_set_uio_cfg(demod, &uio_cfg); 3951 if (rc != 0) { 3952 pr_err("error %d\n", rc); 3953 goto rw_error; 3954 } 3955 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_CFG__A, 0x13, 0); 3956 if (rc != 0) { 3957 pr_err("error %d\n", rc); 3958 goto rw_error; 3959 } 3960 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_PDR_SMA_TX_GPIO_FNC__A, 0x03, 0); 3961 if (rc != 0) { 3962 pr_err("error %d\n", rc); 3963 goto rw_error; 3964 } 3965 3966 /* Write magic word to disable pdr reg write */ 3967 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 3968 if (rc != 0) { 3969 pr_err("error %d\n", rc); 3970 goto rw_error; 3971 } 3972 3973 return 0; 3974 rw_error: 3975 return rc; 3976 } 3977 3978 static int scu_command(struct i2c_device_addr *dev_addr, struct drxjscu_cmd *cmd) 3979 { 3980 int rc; 3981 u16 cur_cmd = 0; 3982 unsigned long timeout; 3983 3984 /* Check param */ 3985 if (cmd == NULL) 3986 return -EINVAL; 3987 3988 /* Wait until SCU command interface is ready to receive command */ 3989 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_COMMAND__A, &cur_cmd, 0); 3990 if (rc != 0) { 3991 pr_err("error %d\n", rc); 3992 goto rw_error; 3993 } 3994 if (cur_cmd != DRX_SCU_READY) 3995 return -EIO; 3996 3997 switch (cmd->parameter_len) { 3998 case 5: 3999 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_4__A, *(cmd->parameter + 4), 0); 4000 if (rc != 0) { 4001 pr_err("error %d\n", rc); 4002 goto rw_error; 4003 } 4004 fallthrough; 4005 case 4: 4006 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_3__A, *(cmd->parameter + 3), 0); 4007 if (rc != 0) { 4008 pr_err("error %d\n", rc); 4009 goto rw_error; 4010 } 4011 fallthrough; 4012 case 3: 4013 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_2__A, *(cmd->parameter + 2), 0); 4014 if (rc != 0) { 4015 pr_err("error %d\n", rc); 4016 goto rw_error; 4017 } 4018 fallthrough; 4019 case 2: 4020 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_1__A, *(cmd->parameter + 1), 0); 4021 if (rc != 0) { 4022 pr_err("error %d\n", rc); 4023 goto rw_error; 4024 } 4025 fallthrough; 4026 case 1: 4027 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_PARAM_0__A, *(cmd->parameter + 0), 0); 4028 if (rc != 0) { 4029 pr_err("error %d\n", rc); 4030 goto rw_error; 4031 } 4032 fallthrough; 4033 case 0: 4034 /* do nothing */ 4035 break; 4036 default: 4037 /* this number of parameters is not supported */ 4038 return -EIO; 4039 } 4040 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_COMMAND__A, cmd->command, 0); 4041 if (rc != 0) { 4042 pr_err("error %d\n", rc); 4043 goto rw_error; 4044 } 4045 4046 /* Wait until SCU has processed command */ 4047 timeout = jiffies + msecs_to_jiffies(DRXJ_MAX_WAITTIME); 4048 while (time_is_after_jiffies(timeout)) { 4049 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_COMMAND__A, &cur_cmd, 0); 4050 if (rc != 0) { 4051 pr_err("error %d\n", rc); 4052 goto rw_error; 4053 } 4054 if (cur_cmd == DRX_SCU_READY) 4055 break; 4056 usleep_range(1000, 2000); 4057 } 4058 4059 if (cur_cmd != DRX_SCU_READY) 4060 return -EIO; 4061 4062 /* read results */ 4063 if ((cmd->result_len > 0) && (cmd->result != NULL)) { 4064 s16 err; 4065 4066 switch (cmd->result_len) { 4067 case 4: 4068 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_3__A, cmd->result + 3, 0); 4069 if (rc != 0) { 4070 pr_err("error %d\n", rc); 4071 goto rw_error; 4072 } 4073 fallthrough; 4074 case 3: 4075 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_2__A, cmd->result + 2, 0); 4076 if (rc != 0) { 4077 pr_err("error %d\n", rc); 4078 goto rw_error; 4079 } 4080 fallthrough; 4081 case 2: 4082 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_1__A, cmd->result + 1, 0); 4083 if (rc != 0) { 4084 pr_err("error %d\n", rc); 4085 goto rw_error; 4086 } 4087 fallthrough; 4088 case 1: 4089 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_PARAM_0__A, cmd->result + 0, 0); 4090 if (rc != 0) { 4091 pr_err("error %d\n", rc); 4092 goto rw_error; 4093 } 4094 fallthrough; 4095 case 0: 4096 /* do nothing */ 4097 break; 4098 default: 4099 /* this number of parameters is not supported */ 4100 return -EIO; 4101 } 4102 4103 /* Check if an error was reported by SCU */ 4104 err = cmd->result[0]; 4105 4106 /* check a few fixed error codes */ 4107 if ((err == (s16) SCU_RAM_PARAM_0_RESULT_UNKSTD) 4108 || (err == (s16) SCU_RAM_PARAM_0_RESULT_UNKCMD) 4109 || (err == (s16) SCU_RAM_PARAM_0_RESULT_INVPAR) 4110 || (err == (s16) SCU_RAM_PARAM_0_RESULT_SIZE) 4111 ) { 4112 return -EINVAL; 4113 } 4114 /* here it is assumed that negative means error, and positive no error */ 4115 else if (err < 0) 4116 return -EIO; 4117 else 4118 return 0; 4119 } 4120 4121 return 0; 4122 4123 rw_error: 4124 return rc; 4125 } 4126 4127 /* 4128 * \fn int DRXJ_DAP_SCUAtomicReadWriteBlock() 4129 * \brief Basic access routine for SCU atomic read or write access 4130 * \param dev_addr pointer to i2c dev address 4131 * \param addr destination/source address 4132 * \param datasize size of data buffer in bytes 4133 * \param data pointer to data buffer 4134 * \return int 4135 * \retval 0 Success 4136 * \retval -EIO Timeout, I2C error, illegal bank 4137 * 4138 */ 4139 #define ADDR_AT_SCU_SPACE(x) ((x - 0x82E000) * 2) 4140 static 4141 int drxj_dap_scu_atomic_read_write_block(struct i2c_device_addr *dev_addr, u32 addr, u16 datasize, /* max 30 bytes because the limit of SCU parameter */ 4142 u8 *data, bool read_flag) 4143 { 4144 struct drxjscu_cmd scu_cmd; 4145 int rc; 4146 u16 set_param_parameters[18]; 4147 u16 cmd_result[15]; 4148 4149 /* Parameter check */ 4150 if (!data || !dev_addr || (datasize % 2) || ((datasize / 2) > 16)) 4151 return -EINVAL; 4152 4153 set_param_parameters[1] = (u16) ADDR_AT_SCU_SPACE(addr); 4154 if (read_flag) { /* read */ 4155 set_param_parameters[0] = ((~(0x0080)) & datasize); 4156 scu_cmd.parameter_len = 2; 4157 scu_cmd.result_len = datasize / 2 + 2; 4158 } else { 4159 int i = 0; 4160 4161 set_param_parameters[0] = 0x0080 | datasize; 4162 for (i = 0; i < (datasize / 2); i++) { 4163 set_param_parameters[i + 2] = 4164 (data[2 * i] | (data[(2 * i) + 1] << 8)); 4165 } 4166 scu_cmd.parameter_len = datasize / 2 + 2; 4167 scu_cmd.result_len = 1; 4168 } 4169 4170 scu_cmd.command = 4171 SCU_RAM_COMMAND_STANDARD_TOP | 4172 SCU_RAM_COMMAND_CMD_AUX_SCU_ATOMIC_ACCESS; 4173 scu_cmd.result = cmd_result; 4174 scu_cmd.parameter = set_param_parameters; 4175 rc = scu_command(dev_addr, &scu_cmd); 4176 if (rc != 0) { 4177 pr_err("error %d\n", rc); 4178 goto rw_error; 4179 } 4180 4181 if (read_flag) { 4182 int i = 0; 4183 /* read data from buffer */ 4184 for (i = 0; i < (datasize / 2); i++) { 4185 data[2 * i] = (u8) (scu_cmd.result[i + 2] & 0xFF); 4186 data[(2 * i) + 1] = (u8) (scu_cmd.result[i + 2] >> 8); 4187 } 4188 } 4189 4190 return 0; 4191 4192 rw_error: 4193 return rc; 4194 4195 } 4196 4197 /*============================================================================*/ 4198 4199 /* 4200 * \fn int DRXJ_DAP_AtomicReadReg16() 4201 * \brief Atomic read of 16 bits words 4202 */ 4203 static 4204 int drxj_dap_scu_atomic_read_reg16(struct i2c_device_addr *dev_addr, 4205 u32 addr, 4206 u16 *data, u32 flags) 4207 { 4208 u8 buf[2] = { 0 }; 4209 int rc; 4210 u16 word = 0; 4211 4212 if (!data) 4213 return -EINVAL; 4214 4215 rc = drxj_dap_scu_atomic_read_write_block(dev_addr, addr, 2, buf, true); 4216 if (rc < 0) 4217 return rc; 4218 4219 word = (u16) (buf[0] + (buf[1] << 8)); 4220 4221 *data = word; 4222 4223 return rc; 4224 } 4225 4226 /*============================================================================*/ 4227 /* 4228 * \fn int drxj_dap_scu_atomic_write_reg16() 4229 * \brief Atomic read of 16 bits words 4230 */ 4231 static 4232 int drxj_dap_scu_atomic_write_reg16(struct i2c_device_addr *dev_addr, 4233 u32 addr, 4234 u16 data, u32 flags) 4235 { 4236 u8 buf[2]; 4237 int rc; 4238 4239 buf[0] = (u8) (data & 0xff); 4240 buf[1] = (u8) ((data >> 8) & 0xff); 4241 4242 rc = drxj_dap_scu_atomic_read_write_block(dev_addr, addr, 2, buf, false); 4243 4244 return rc; 4245 } 4246 4247 /* -------------------------------------------------------------------------- */ 4248 /* 4249 * \brief Measure result of ADC synchronisation 4250 * \param demod demod instance 4251 * \param count (returned) count 4252 * \return int. 4253 * \retval 0 Success 4254 * \retval -EIO Failure: I2C error 4255 * 4256 */ 4257 static int adc_sync_measurement(struct drx_demod_instance *demod, u16 *count) 4258 { 4259 struct i2c_device_addr *dev_addr = NULL; 4260 int rc; 4261 u16 data = 0; 4262 4263 dev_addr = demod->my_i2c_dev_addr; 4264 4265 /* Start measurement */ 4266 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE, 0); 4267 if (rc != 0) { 4268 pr_err("error %d\n", rc); 4269 goto rw_error; 4270 } 4271 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_START_LOCK__A, 1, 0); 4272 if (rc != 0) { 4273 pr_err("error %d\n", rc); 4274 goto rw_error; 4275 } 4276 4277 /* Wait at least 3*128*(1/sysclk) <<< 1 millisec */ 4278 msleep(1); 4279 4280 *count = 0; 4281 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_PHASE0__A, &data, 0); 4282 if (rc != 0) { 4283 pr_err("error %d\n", rc); 4284 goto rw_error; 4285 } 4286 if (data == 127) 4287 *count = *count + 1; 4288 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_PHASE1__A, &data, 0); 4289 if (rc != 0) { 4290 pr_err("error %d\n", rc); 4291 goto rw_error; 4292 } 4293 if (data == 127) 4294 *count = *count + 1; 4295 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_PHASE2__A, &data, 0); 4296 if (rc != 0) { 4297 pr_err("error %d\n", rc); 4298 goto rw_error; 4299 } 4300 if (data == 127) 4301 *count = *count + 1; 4302 4303 return 0; 4304 rw_error: 4305 return rc; 4306 } 4307 4308 /* 4309 * \brief Synchronize analog and digital clock domains 4310 * \param demod demod instance 4311 * \return int. 4312 * \retval 0 Success 4313 * \retval -EIO Failure: I2C error or failure to synchronize 4314 * 4315 * An IQM reset will also reset the results of this synchronization. 4316 * After an IQM reset this routine needs to be called again. 4317 * 4318 */ 4319 4320 static int adc_synchronization(struct drx_demod_instance *demod) 4321 { 4322 struct i2c_device_addr *dev_addr = NULL; 4323 int rc; 4324 u16 count = 0; 4325 4326 dev_addr = demod->my_i2c_dev_addr; 4327 4328 rc = adc_sync_measurement(demod, &count); 4329 if (rc != 0) { 4330 pr_err("error %d\n", rc); 4331 goto rw_error; 4332 } 4333 4334 if (count == 1) { 4335 /* Try sampling on a different edge */ 4336 u16 clk_neg = 0; 4337 4338 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_CLKNEG__A, &clk_neg, 0); 4339 if (rc != 0) { 4340 pr_err("error %d\n", rc); 4341 goto rw_error; 4342 } 4343 4344 clk_neg ^= IQM_AF_CLKNEG_CLKNEGDATA__M; 4345 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLKNEG__A, clk_neg, 0); 4346 if (rc != 0) { 4347 pr_err("error %d\n", rc); 4348 goto rw_error; 4349 } 4350 4351 rc = adc_sync_measurement(demod, &count); 4352 if (rc != 0) { 4353 pr_err("error %d\n", rc); 4354 goto rw_error; 4355 } 4356 } 4357 4358 /* TODO: implement fallback scenarios */ 4359 if (count < 2) 4360 return -EIO; 4361 4362 return 0; 4363 rw_error: 4364 return rc; 4365 } 4366 4367 /*============================================================================*/ 4368 /*== END AUXILIARY FUNCTIONS ==*/ 4369 /*============================================================================*/ 4370 4371 /*============================================================================*/ 4372 /*============================================================================*/ 4373 /*== 8VSB & QAM COMMON DATAPATH FUNCTIONS ==*/ 4374 /*============================================================================*/ 4375 /*============================================================================*/ 4376 /* 4377 * \fn int init_agc () 4378 * \brief Initialize AGC for all standards. 4379 * \param demod instance of demodulator. 4380 * \param channel pointer to channel data. 4381 * \return int. 4382 */ 4383 static int init_agc(struct drx_demod_instance *demod) 4384 { 4385 struct i2c_device_addr *dev_addr = NULL; 4386 struct drx_common_attr *common_attr = NULL; 4387 struct drxj_data *ext_attr = NULL; 4388 struct drxj_cfg_agc *p_agc_rf_settings = NULL; 4389 struct drxj_cfg_agc *p_agc_if_settings = NULL; 4390 int rc; 4391 u16 ingain_tgt_max = 0; 4392 u16 clp_dir_to = 0; 4393 u16 sns_sum_max = 0; 4394 u16 clp_sum_max = 0; 4395 u16 sns_dir_to = 0; 4396 u16 ki_innergain_min = 0; 4397 u16 agc_ki = 0; 4398 u16 ki_max = 0; 4399 u16 if_iaccu_hi_tgt_min = 0; 4400 u16 data = 0; 4401 u16 agc_ki_dgain = 0; 4402 u16 ki_min = 0; 4403 u16 clp_ctrl_mode = 0; 4404 u16 agc_rf = 0; 4405 u16 agc_if = 0; 4406 4407 dev_addr = demod->my_i2c_dev_addr; 4408 common_attr = (struct drx_common_attr *) demod->my_common_attr; 4409 ext_attr = (struct drxj_data *) demod->my_ext_attr; 4410 4411 switch (ext_attr->standard) { 4412 case DRX_STANDARD_8VSB: 4413 clp_sum_max = 1023; 4414 clp_dir_to = (u16) (-9); 4415 sns_sum_max = 1023; 4416 sns_dir_to = (u16) (-9); 4417 ki_innergain_min = (u16) (-32768); 4418 ki_max = 0x032C; 4419 agc_ki_dgain = 0xC; 4420 if_iaccu_hi_tgt_min = 2047; 4421 ki_min = 0x0117; 4422 ingain_tgt_max = 16383; 4423 clp_ctrl_mode = 0; 4424 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff, 0); 4425 if (rc != 0) { 4426 pr_err("error %d\n", rc); 4427 goto rw_error; 4428 } 4429 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0, 0); 4430 if (rc != 0) { 4431 pr_err("error %d\n", rc); 4432 goto rw_error; 4433 } 4434 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM__A, 0, 0); 4435 if (rc != 0) { 4436 pr_err("error %d\n", rc); 4437 goto rw_error; 4438 } 4439 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CYCCNT__A, 0, 0); 4440 if (rc != 0) { 4441 pr_err("error %d\n", rc); 4442 goto rw_error; 4443 } 4444 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_WD__A, 0, 0); 4445 if (rc != 0) { 4446 pr_err("error %d\n", rc); 4447 goto rw_error; 4448 } 4449 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_STP__A, 1, 0); 4450 if (rc != 0) { 4451 pr_err("error %d\n", rc); 4452 goto rw_error; 4453 } 4454 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM__A, 0, 0); 4455 if (rc != 0) { 4456 pr_err("error %d\n", rc); 4457 goto rw_error; 4458 } 4459 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_CYCCNT__A, 0, 0); 4460 if (rc != 0) { 4461 pr_err("error %d\n", rc); 4462 goto rw_error; 4463 } 4464 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_WD__A, 0, 0); 4465 if (rc != 0) { 4466 pr_err("error %d\n", rc); 4467 goto rw_error; 4468 } 4469 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_STP__A, 1, 0); 4470 if (rc != 0) { 4471 pr_err("error %d\n", rc); 4472 goto rw_error; 4473 } 4474 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN__A, 1024, 0); 4475 if (rc != 0) { 4476 pr_err("error %d\n", rc); 4477 goto rw_error; 4478 } 4479 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_VSB_AGC_POW_TGT__A, 22600, 0); 4480 if (rc != 0) { 4481 pr_err("error %d\n", rc); 4482 goto rw_error; 4483 } 4484 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT__A, 13200, 0); 4485 if (rc != 0) { 4486 pr_err("error %d\n", rc); 4487 goto rw_error; 4488 } 4489 p_agc_if_settings = &(ext_attr->vsb_if_agc_cfg); 4490 p_agc_rf_settings = &(ext_attr->vsb_rf_agc_cfg); 4491 break; 4492 #ifndef DRXJ_VSB_ONLY 4493 case DRX_STANDARD_ITU_A: 4494 case DRX_STANDARD_ITU_C: 4495 case DRX_STANDARD_ITU_B: 4496 ingain_tgt_max = 5119; 4497 clp_sum_max = 1023; 4498 clp_dir_to = (u16) (-5); 4499 sns_sum_max = 127; 4500 sns_dir_to = (u16) (-3); 4501 ki_innergain_min = 0; 4502 ki_max = 0x0657; 4503 if_iaccu_hi_tgt_min = 2047; 4504 agc_ki_dgain = 0x7; 4505 ki_min = 0x0117; 4506 clp_ctrl_mode = 0; 4507 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff, 0); 4508 if (rc != 0) { 4509 pr_err("error %d\n", rc); 4510 goto rw_error; 4511 } 4512 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0, 0); 4513 if (rc != 0) { 4514 pr_err("error %d\n", rc); 4515 goto rw_error; 4516 } 4517 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM__A, 0, 0); 4518 if (rc != 0) { 4519 pr_err("error %d\n", rc); 4520 goto rw_error; 4521 } 4522 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CYCCNT__A, 0, 0); 4523 if (rc != 0) { 4524 pr_err("error %d\n", rc); 4525 goto rw_error; 4526 } 4527 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_WD__A, 0, 0); 4528 if (rc != 0) { 4529 pr_err("error %d\n", rc); 4530 goto rw_error; 4531 } 4532 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_STP__A, 1, 0); 4533 if (rc != 0) { 4534 pr_err("error %d\n", rc); 4535 goto rw_error; 4536 } 4537 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM__A, 0, 0); 4538 if (rc != 0) { 4539 pr_err("error %d\n", rc); 4540 goto rw_error; 4541 } 4542 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_CYCCNT__A, 0, 0); 4543 if (rc != 0) { 4544 pr_err("error %d\n", rc); 4545 goto rw_error; 4546 } 4547 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_WD__A, 0, 0); 4548 if (rc != 0) { 4549 pr_err("error %d\n", rc); 4550 goto rw_error; 4551 } 4552 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_STP__A, 1, 0); 4553 if (rc != 0) { 4554 pr_err("error %d\n", rc); 4555 goto rw_error; 4556 } 4557 p_agc_if_settings = &(ext_attr->qam_if_agc_cfg); 4558 p_agc_rf_settings = &(ext_attr->qam_rf_agc_cfg); 4559 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT__A, p_agc_if_settings->top, 0); 4560 if (rc != 0) { 4561 pr_err("error %d\n", rc); 4562 goto rw_error; 4563 } 4564 4565 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_AGC_KI__A, &agc_ki, 0); 4566 if (rc != 0) { 4567 pr_err("error %d\n", rc); 4568 goto rw_error; 4569 } 4570 agc_ki &= 0xf000; 4571 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI__A, agc_ki, 0); 4572 if (rc != 0) { 4573 pr_err("error %d\n", rc); 4574 goto rw_error; 4575 } 4576 break; 4577 #endif 4578 default: 4579 return -EINVAL; 4580 } 4581 4582 /* for new AGC interface */ 4583 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT_MIN__A, p_agc_if_settings->top, 0); 4584 if (rc != 0) { 4585 pr_err("error %d\n", rc); 4586 goto rw_error; 4587 } 4588 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN__A, p_agc_if_settings->top, 0); 4589 if (rc != 0) { 4590 pr_err("error %d\n", rc); 4591 goto rw_error; 4592 } /* Gain fed from inner to outer AGC */ 4593 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingain_tgt_max, 0); 4594 if (rc != 0) { 4595 pr_err("error %d\n", rc); 4596 goto rw_error; 4597 } 4598 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, if_iaccu_hi_tgt_min, 0); 4599 if (rc != 0) { 4600 pr_err("error %d\n", rc); 4601 goto rw_error; 4602 } 4603 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_IF_IACCU_HI__A, 0, 0); 4604 if (rc != 0) { 4605 pr_err("error %d\n", rc); 4606 goto rw_error; 4607 } /* set to p_agc_settings->top before */ 4608 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_IF_IACCU_LO__A, 0, 0); 4609 if (rc != 0) { 4610 pr_err("error %d\n", rc); 4611 goto rw_error; 4612 } 4613 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_RF_IACCU_HI__A, 0, 0); 4614 if (rc != 0) { 4615 pr_err("error %d\n", rc); 4616 goto rw_error; 4617 } 4618 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_RF_IACCU_LO__A, 0, 0); 4619 if (rc != 0) { 4620 pr_err("error %d\n", rc); 4621 goto rw_error; 4622 } 4623 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_RF_MAX__A, 32767, 0); 4624 if (rc != 0) { 4625 pr_err("error %d\n", rc); 4626 goto rw_error; 4627 } 4628 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM_MAX__A, clp_sum_max, 0); 4629 if (rc != 0) { 4630 pr_err("error %d\n", rc); 4631 goto rw_error; 4632 } 4633 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM_MAX__A, sns_sum_max, 0); 4634 if (rc != 0) { 4635 pr_err("error %d\n", rc); 4636 goto rw_error; 4637 } 4638 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, ki_innergain_min, 0); 4639 if (rc != 0) { 4640 pr_err("error %d\n", rc); 4641 goto rw_error; 4642 } 4643 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50, 0); 4644 if (rc != 0) { 4645 pr_err("error %d\n", rc); 4646 goto rw_error; 4647 } 4648 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_CYCLEN__A, 500, 0); 4649 if (rc != 0) { 4650 pr_err("error %d\n", rc); 4651 goto rw_error; 4652 } 4653 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_CYCLEN__A, 500, 0); 4654 if (rc != 0) { 4655 pr_err("error %d\n", rc); 4656 goto rw_error; 4657 } 4658 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20, 0); 4659 if (rc != 0) { 4660 pr_err("error %d\n", rc); 4661 goto rw_error; 4662 } 4663 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MIN__A, ki_min, 0); 4664 if (rc != 0) { 4665 pr_err("error %d\n", rc); 4666 goto rw_error; 4667 } 4668 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_MAX__A, ki_max, 0); 4669 if (rc != 0) { 4670 pr_err("error %d\n", rc); 4671 goto rw_error; 4672 } 4673 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI_RED__A, 0, 0); 4674 if (rc != 0) { 4675 pr_err("error %d\n", rc); 4676 goto rw_error; 4677 } 4678 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_SUM_MIN__A, 8, 0); 4679 if (rc != 0) { 4680 pr_err("error %d\n", rc); 4681 goto rw_error; 4682 } 4683 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CYCLEN__A, 500, 0); 4684 if (rc != 0) { 4685 pr_err("error %d\n", rc); 4686 goto rw_error; 4687 } 4688 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_DIR_TO__A, clp_dir_to, 0); 4689 if (rc != 0) { 4690 pr_err("error %d\n", rc); 4691 goto rw_error; 4692 } 4693 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_SUM_MIN__A, 8, 0); 4694 if (rc != 0) { 4695 pr_err("error %d\n", rc); 4696 goto rw_error; 4697 } 4698 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_SNS_DIR_TO__A, sns_dir_to, 0); 4699 if (rc != 0) { 4700 pr_err("error %d\n", rc); 4701 goto rw_error; 4702 } 4703 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, 50, 0); 4704 if (rc != 0) { 4705 pr_err("error %d\n", rc); 4706 goto rw_error; 4707 } 4708 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_CLP_CTRL_MODE__A, clp_ctrl_mode, 0); 4709 if (rc != 0) { 4710 pr_err("error %d\n", rc); 4711 goto rw_error; 4712 } 4713 4714 agc_rf = 0x800 + p_agc_rf_settings->cut_off_current; 4715 if (common_attr->tuner_rf_agc_pol == true) 4716 agc_rf = 0x87ff - agc_rf; 4717 4718 agc_if = 0x800; 4719 if (common_attr->tuner_if_agc_pol == true) 4720 agc_rf = 0x87ff - agc_rf; 4721 4722 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AGC_RF__A, agc_rf, 0); 4723 if (rc != 0) { 4724 pr_err("error %d\n", rc); 4725 goto rw_error; 4726 } 4727 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AGC_IF__A, agc_if, 0); 4728 if (rc != 0) { 4729 pr_err("error %d\n", rc); 4730 goto rw_error; 4731 } 4732 4733 /* Set/restore Ki DGAIN factor */ 4734 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 4735 if (rc != 0) { 4736 pr_err("error %d\n", rc); 4737 goto rw_error; 4738 } 4739 data &= ~SCU_RAM_AGC_KI_DGAIN__M; 4740 data |= (agc_ki_dgain << SCU_RAM_AGC_KI_DGAIN__B); 4741 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 4742 if (rc != 0) { 4743 pr_err("error %d\n", rc); 4744 goto rw_error; 4745 } 4746 4747 return 0; 4748 rw_error: 4749 return rc; 4750 } 4751 4752 /* 4753 * \fn int set_frequency () 4754 * \brief Set frequency shift. 4755 * \param demod instance of demodulator. 4756 * \param channel pointer to channel data. 4757 * \param tuner_freq_offset residual frequency from tuner. 4758 * \return int. 4759 */ 4760 static int 4761 set_frequency(struct drx_demod_instance *demod, 4762 struct drx_channel *channel, s32 tuner_freq_offset) 4763 { 4764 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 4765 struct drxj_data *ext_attr = demod->my_ext_attr; 4766 int rc; 4767 s32 sampling_frequency = 0; 4768 s32 frequency_shift = 0; 4769 s32 if_freq_actual = 0; 4770 s32 rf_freq_residual = -1 * tuner_freq_offset; 4771 s32 adc_freq = 0; 4772 s32 intermediate_freq = 0; 4773 u32 iqm_fs_rate_ofs = 0; 4774 bool adc_flip = true; 4775 bool select_pos_image = false; 4776 bool rf_mirror; 4777 bool tuner_mirror; 4778 bool image_to_select = true; 4779 s32 fm_frequency_shift = 0; 4780 4781 rf_mirror = (ext_attr->mirror == DRX_MIRROR_YES) ? true : false; 4782 tuner_mirror = demod->my_common_attr->mirror_freq_spect ? false : true; 4783 /* 4784 Program frequency shifter 4785 No need to account for mirroring on RF 4786 */ 4787 switch (ext_attr->standard) { 4788 case DRX_STANDARD_ITU_A: 4789 case DRX_STANDARD_ITU_C: 4790 case DRX_STANDARD_PAL_SECAM_LP: 4791 case DRX_STANDARD_8VSB: 4792 select_pos_image = true; 4793 break; 4794 case DRX_STANDARD_FM: 4795 /* After IQM FS sound carrier must appear at 4 Mhz in spect. 4796 Sound carrier is already 3Mhz above centre frequency due 4797 to tuner setting so now add an extra shift of 1MHz... */ 4798 fm_frequency_shift = 1000; 4799 fallthrough; 4800 case DRX_STANDARD_ITU_B: 4801 case DRX_STANDARD_NTSC: 4802 case DRX_STANDARD_PAL_SECAM_BG: 4803 case DRX_STANDARD_PAL_SECAM_DK: 4804 case DRX_STANDARD_PAL_SECAM_I: 4805 case DRX_STANDARD_PAL_SECAM_L: 4806 select_pos_image = false; 4807 break; 4808 default: 4809 return -EINVAL; 4810 } 4811 intermediate_freq = demod->my_common_attr->intermediate_freq; 4812 sampling_frequency = demod->my_common_attr->sys_clock_freq / 3; 4813 if (tuner_mirror) 4814 if_freq_actual = intermediate_freq + rf_freq_residual + fm_frequency_shift; 4815 else 4816 if_freq_actual = intermediate_freq - rf_freq_residual - fm_frequency_shift; 4817 if (if_freq_actual > sampling_frequency / 2) { 4818 /* adc mirrors */ 4819 adc_freq = sampling_frequency - if_freq_actual; 4820 adc_flip = true; 4821 } else { 4822 /* adc doesn't mirror */ 4823 adc_freq = if_freq_actual; 4824 adc_flip = false; 4825 } 4826 4827 frequency_shift = adc_freq; 4828 image_to_select = 4829 (bool) (rf_mirror ^ tuner_mirror ^ adc_flip ^ select_pos_image); 4830 iqm_fs_rate_ofs = frac28(frequency_shift, sampling_frequency); 4831 4832 if (image_to_select) 4833 iqm_fs_rate_ofs = ~iqm_fs_rate_ofs + 1; 4834 4835 /* Program frequency shifter with tuner offset compensation */ 4836 /* frequency_shift += tuner_freq_offset; TODO */ 4837 rc = drxdap_fasi_write_reg32(dev_addr, IQM_FS_RATE_OFS_LO__A, iqm_fs_rate_ofs, 0); 4838 if (rc != 0) { 4839 pr_err("error %d\n", rc); 4840 goto rw_error; 4841 } 4842 ext_attr->iqm_fs_rate_ofs = iqm_fs_rate_ofs; 4843 ext_attr->pos_image = (bool) (rf_mirror ^ tuner_mirror ^ select_pos_image); 4844 4845 return 0; 4846 rw_error: 4847 return rc; 4848 } 4849 4850 /* 4851 * \fn int get_acc_pkt_err() 4852 * \brief Retrieve signal strength for VSB and QAM. 4853 * \param demod Pointer to demod instance 4854 * \param packet_err Pointer to packet error 4855 * \return int. 4856 * \retval 0 sig_strength contains valid data. 4857 * \retval -EINVAL sig_strength is NULL. 4858 * \retval -EIO Erroneous data, sig_strength contains invalid data. 4859 */ 4860 #ifdef DRXJ_SIGNAL_ACCUM_ERR 4861 static int get_acc_pkt_err(struct drx_demod_instance *demod, u16 *packet_err) 4862 { 4863 int rc; 4864 static u16 pkt_err; 4865 static u16 last_pkt_err; 4866 u16 data = 0; 4867 struct drxj_data *ext_attr = NULL; 4868 struct i2c_device_addr *dev_addr = NULL; 4869 4870 ext_attr = (struct drxj_data *) demod->my_ext_attr; 4871 dev_addr = demod->my_i2c_dev_addr; 4872 4873 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, &data, 0); 4874 if (rc != 0) { 4875 pr_err("error %d\n", rc); 4876 goto rw_error; 4877 } 4878 if (ext_attr->reset_pkt_err_acc) { 4879 last_pkt_err = data; 4880 pkt_err = 0; 4881 ext_attr->reset_pkt_err_acc = false; 4882 } 4883 4884 if (data < last_pkt_err) { 4885 pkt_err += 0xffff - last_pkt_err; 4886 pkt_err += data; 4887 } else { 4888 pkt_err += (data - last_pkt_err); 4889 } 4890 *packet_err = pkt_err; 4891 last_pkt_err = data; 4892 4893 return 0; 4894 rw_error: 4895 return rc; 4896 } 4897 #endif 4898 4899 4900 /*============================================================================*/ 4901 4902 /* 4903 * \fn int set_agc_rf () 4904 * \brief Configure RF AGC 4905 * \param demod instance of demodulator. 4906 * \param agc_settings AGC configuration structure 4907 * \return int. 4908 */ 4909 static int 4910 set_agc_rf(struct drx_demod_instance *demod, struct drxj_cfg_agc *agc_settings, bool atomic) 4911 { 4912 struct i2c_device_addr *dev_addr = NULL; 4913 struct drxj_data *ext_attr = NULL; 4914 struct drxj_cfg_agc *p_agc_settings = NULL; 4915 struct drx_common_attr *common_attr = NULL; 4916 int rc; 4917 drx_write_reg16func_t scu_wr16 = NULL; 4918 drx_read_reg16func_t scu_rr16 = NULL; 4919 4920 common_attr = (struct drx_common_attr *) demod->my_common_attr; 4921 dev_addr = demod->my_i2c_dev_addr; 4922 ext_attr = (struct drxj_data *) demod->my_ext_attr; 4923 4924 if (atomic) { 4925 scu_rr16 = drxj_dap_scu_atomic_read_reg16; 4926 scu_wr16 = drxj_dap_scu_atomic_write_reg16; 4927 } else { 4928 scu_rr16 = drxj_dap_read_reg16; 4929 scu_wr16 = drxj_dap_write_reg16; 4930 } 4931 4932 /* Configure AGC only if standard is currently active */ 4933 if ((ext_attr->standard == agc_settings->standard) || 4934 (DRXJ_ISQAMSTD(ext_attr->standard) && 4935 DRXJ_ISQAMSTD(agc_settings->standard)) || 4936 (DRXJ_ISATVSTD(ext_attr->standard) && 4937 DRXJ_ISATVSTD(agc_settings->standard))) { 4938 u16 data = 0; 4939 4940 switch (agc_settings->ctrl_mode) { 4941 case DRX_AGC_CTRL_AUTO: 4942 4943 /* Enable RF AGC DAC */ 4944 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 4945 if (rc != 0) { 4946 pr_err("error %d\n", rc); 4947 goto rw_error; 4948 } 4949 data |= IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE; 4950 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 4951 if (rc != 0) { 4952 pr_err("error %d\n", rc); 4953 goto rw_error; 4954 } 4955 4956 /* Enable SCU RF AGC loop */ 4957 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 4958 if (rc != 0) { 4959 pr_err("error %d\n", rc); 4960 goto rw_error; 4961 } 4962 data &= ~SCU_RAM_AGC_KI_RF__M; 4963 if (ext_attr->standard == DRX_STANDARD_8VSB) 4964 data |= (2 << SCU_RAM_AGC_KI_RF__B); 4965 else if (DRXJ_ISQAMSTD(ext_attr->standard)) 4966 data |= (5 << SCU_RAM_AGC_KI_RF__B); 4967 else 4968 data |= (4 << SCU_RAM_AGC_KI_RF__B); 4969 4970 if (common_attr->tuner_rf_agc_pol) 4971 data |= SCU_RAM_AGC_KI_INV_RF_POL__M; 4972 else 4973 data &= ~SCU_RAM_AGC_KI_INV_RF_POL__M; 4974 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 4975 if (rc != 0) { 4976 pr_err("error %d\n", rc); 4977 goto rw_error; 4978 } 4979 4980 /* Set speed ( using complementary reduction value ) */ 4981 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI_RED__A, &data, 0); 4982 if (rc != 0) { 4983 pr_err("error %d\n", rc); 4984 goto rw_error; 4985 } 4986 data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; 4987 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI_RED__A, (~(agc_settings->speed << SCU_RAM_AGC_KI_RED_RAGC_RED__B) & SCU_RAM_AGC_KI_RED_RAGC_RED__M) | data, 0); 4988 if (rc != 0) { 4989 pr_err("error %d\n", rc); 4990 goto rw_error; 4991 } 4992 4993 if (agc_settings->standard == DRX_STANDARD_8VSB) 4994 p_agc_settings = &(ext_attr->vsb_if_agc_cfg); 4995 else if (DRXJ_ISQAMSTD(agc_settings->standard)) 4996 p_agc_settings = &(ext_attr->qam_if_agc_cfg); 4997 else if (DRXJ_ISATVSTD(agc_settings->standard)) 4998 p_agc_settings = &(ext_attr->atv_if_agc_cfg); 4999 else 5000 return -EINVAL; 5001 5002 /* Set TOP, only if IF-AGC is in AUTO mode */ 5003 if (p_agc_settings->ctrl_mode == DRX_AGC_CTRL_AUTO) { 5004 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, agc_settings->top, 0); 5005 if (rc != 0) { 5006 pr_err("error %d\n", rc); 5007 goto rw_error; 5008 } 5009 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, agc_settings->top, 0); 5010 if (rc != 0) { 5011 pr_err("error %d\n", rc); 5012 goto rw_error; 5013 } 5014 } 5015 5016 /* Cut-Off current */ 5017 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_RF_IACCU_HI_CO__A, agc_settings->cut_off_current, 0); 5018 if (rc != 0) { 5019 pr_err("error %d\n", rc); 5020 goto rw_error; 5021 } 5022 break; 5023 case DRX_AGC_CTRL_USER: 5024 5025 /* Enable RF AGC DAC */ 5026 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5027 if (rc != 0) { 5028 pr_err("error %d\n", rc); 5029 goto rw_error; 5030 } 5031 data |= IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE; 5032 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5033 if (rc != 0) { 5034 pr_err("error %d\n", rc); 5035 goto rw_error; 5036 } 5037 5038 /* Disable SCU RF AGC loop */ 5039 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5040 if (rc != 0) { 5041 pr_err("error %d\n", rc); 5042 goto rw_error; 5043 } 5044 data &= ~SCU_RAM_AGC_KI_RF__M; 5045 if (common_attr->tuner_rf_agc_pol) 5046 data |= SCU_RAM_AGC_KI_INV_RF_POL__M; 5047 else 5048 data &= ~SCU_RAM_AGC_KI_INV_RF_POL__M; 5049 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5050 if (rc != 0) { 5051 pr_err("error %d\n", rc); 5052 goto rw_error; 5053 } 5054 5055 /* Write value to output pin */ 5056 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_RF_IACCU_HI__A, agc_settings->output_level, 0); 5057 if (rc != 0) { 5058 pr_err("error %d\n", rc); 5059 goto rw_error; 5060 } 5061 break; 5062 case DRX_AGC_CTRL_OFF: 5063 5064 /* Disable RF AGC DAC */ 5065 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5066 if (rc != 0) { 5067 pr_err("error %d\n", rc); 5068 goto rw_error; 5069 } 5070 data &= (~IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE); 5071 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5072 if (rc != 0) { 5073 pr_err("error %d\n", rc); 5074 goto rw_error; 5075 } 5076 5077 /* Disable SCU RF AGC loop */ 5078 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5079 if (rc != 0) { 5080 pr_err("error %d\n", rc); 5081 goto rw_error; 5082 } 5083 data &= ~SCU_RAM_AGC_KI_RF__M; 5084 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5085 if (rc != 0) { 5086 pr_err("error %d\n", rc); 5087 goto rw_error; 5088 } 5089 break; 5090 default: 5091 return -EINVAL; 5092 } /* switch ( agcsettings->ctrl_mode ) */ 5093 } 5094 5095 /* Store rf agc settings */ 5096 switch (agc_settings->standard) { 5097 case DRX_STANDARD_8VSB: 5098 ext_attr->vsb_rf_agc_cfg = *agc_settings; 5099 break; 5100 #ifndef DRXJ_VSB_ONLY 5101 case DRX_STANDARD_ITU_A: 5102 case DRX_STANDARD_ITU_B: 5103 case DRX_STANDARD_ITU_C: 5104 ext_attr->qam_rf_agc_cfg = *agc_settings; 5105 break; 5106 #endif 5107 default: 5108 return -EIO; 5109 } 5110 5111 return 0; 5112 rw_error: 5113 return rc; 5114 } 5115 5116 /* 5117 * \fn int set_agc_if () 5118 * \brief Configure If AGC 5119 * \param demod instance of demodulator. 5120 * \param agc_settings AGC configuration structure 5121 * \return int. 5122 */ 5123 static int 5124 set_agc_if(struct drx_demod_instance *demod, struct drxj_cfg_agc *agc_settings, bool atomic) 5125 { 5126 struct i2c_device_addr *dev_addr = NULL; 5127 struct drxj_data *ext_attr = NULL; 5128 struct drxj_cfg_agc *p_agc_settings = NULL; 5129 struct drx_common_attr *common_attr = NULL; 5130 drx_write_reg16func_t scu_wr16 = NULL; 5131 drx_read_reg16func_t scu_rr16 = NULL; 5132 int rc; 5133 5134 common_attr = (struct drx_common_attr *) demod->my_common_attr; 5135 dev_addr = demod->my_i2c_dev_addr; 5136 ext_attr = (struct drxj_data *) demod->my_ext_attr; 5137 5138 if (atomic) { 5139 scu_rr16 = drxj_dap_scu_atomic_read_reg16; 5140 scu_wr16 = drxj_dap_scu_atomic_write_reg16; 5141 } else { 5142 scu_rr16 = drxj_dap_read_reg16; 5143 scu_wr16 = drxj_dap_write_reg16; 5144 } 5145 5146 /* Configure AGC only if standard is currently active */ 5147 if ((ext_attr->standard == agc_settings->standard) || 5148 (DRXJ_ISQAMSTD(ext_attr->standard) && 5149 DRXJ_ISQAMSTD(agc_settings->standard)) || 5150 (DRXJ_ISATVSTD(ext_attr->standard) && 5151 DRXJ_ISATVSTD(agc_settings->standard))) { 5152 u16 data = 0; 5153 5154 switch (agc_settings->ctrl_mode) { 5155 case DRX_AGC_CTRL_AUTO: 5156 /* Enable IF AGC DAC */ 5157 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5158 if (rc != 0) { 5159 pr_err("error %d\n", rc); 5160 goto rw_error; 5161 } 5162 data |= IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE; 5163 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5164 if (rc != 0) { 5165 pr_err("error %d\n", rc); 5166 goto rw_error; 5167 } 5168 5169 /* Enable SCU IF AGC loop */ 5170 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5171 if (rc != 0) { 5172 pr_err("error %d\n", rc); 5173 goto rw_error; 5174 } 5175 data &= ~SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5176 data &= ~SCU_RAM_AGC_KI_IF__M; 5177 if (ext_attr->standard == DRX_STANDARD_8VSB) 5178 data |= (3 << SCU_RAM_AGC_KI_IF__B); 5179 else if (DRXJ_ISQAMSTD(ext_attr->standard)) 5180 data |= (6 << SCU_RAM_AGC_KI_IF__B); 5181 else 5182 data |= (5 << SCU_RAM_AGC_KI_IF__B); 5183 5184 if (common_attr->tuner_if_agc_pol) 5185 data |= SCU_RAM_AGC_KI_INV_IF_POL__M; 5186 else 5187 data &= ~SCU_RAM_AGC_KI_INV_IF_POL__M; 5188 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5189 if (rc != 0) { 5190 pr_err("error %d\n", rc); 5191 goto rw_error; 5192 } 5193 5194 /* Set speed (using complementary reduction value) */ 5195 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI_RED__A, &data, 0); 5196 if (rc != 0) { 5197 pr_err("error %d\n", rc); 5198 goto rw_error; 5199 } 5200 data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; 5201 rc = (*scu_wr16) (dev_addr, SCU_RAM_AGC_KI_RED__A, (~(agc_settings->speed << SCU_RAM_AGC_KI_RED_IAGC_RED__B) & SCU_RAM_AGC_KI_RED_IAGC_RED__M) | data, 0); 5202 if (rc != 0) { 5203 pr_err("error %d\n", rc); 5204 goto rw_error; 5205 } 5206 5207 if (agc_settings->standard == DRX_STANDARD_8VSB) 5208 p_agc_settings = &(ext_attr->vsb_rf_agc_cfg); 5209 else if (DRXJ_ISQAMSTD(agc_settings->standard)) 5210 p_agc_settings = &(ext_attr->qam_rf_agc_cfg); 5211 else if (DRXJ_ISATVSTD(agc_settings->standard)) 5212 p_agc_settings = &(ext_attr->atv_rf_agc_cfg); 5213 else 5214 return -EINVAL; 5215 5216 /* Restore TOP */ 5217 if (p_agc_settings->ctrl_mode == DRX_AGC_CTRL_AUTO) { 5218 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, p_agc_settings->top, 0); 5219 if (rc != 0) { 5220 pr_err("error %d\n", rc); 5221 goto rw_error; 5222 } 5223 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, p_agc_settings->top, 0); 5224 if (rc != 0) { 5225 pr_err("error %d\n", rc); 5226 goto rw_error; 5227 } 5228 } else { 5229 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, 0, 0); 5230 if (rc != 0) { 5231 pr_err("error %d\n", rc); 5232 goto rw_error; 5233 } 5234 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, 0, 0); 5235 if (rc != 0) { 5236 pr_err("error %d\n", rc); 5237 goto rw_error; 5238 } 5239 } 5240 break; 5241 5242 case DRX_AGC_CTRL_USER: 5243 5244 /* Enable IF AGC DAC */ 5245 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5246 if (rc != 0) { 5247 pr_err("error %d\n", rc); 5248 goto rw_error; 5249 } 5250 data |= IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE; 5251 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5252 if (rc != 0) { 5253 pr_err("error %d\n", rc); 5254 goto rw_error; 5255 } 5256 5257 /* Disable SCU IF AGC loop */ 5258 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5259 if (rc != 0) { 5260 pr_err("error %d\n", rc); 5261 goto rw_error; 5262 } 5263 data &= ~SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5264 data |= SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5265 if (common_attr->tuner_if_agc_pol) 5266 data |= SCU_RAM_AGC_KI_INV_IF_POL__M; 5267 else 5268 data &= ~SCU_RAM_AGC_KI_INV_IF_POL__M; 5269 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5270 if (rc != 0) { 5271 pr_err("error %d\n", rc); 5272 goto rw_error; 5273 } 5274 5275 /* Write value to output pin */ 5276 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, agc_settings->output_level, 0); 5277 if (rc != 0) { 5278 pr_err("error %d\n", rc); 5279 goto rw_error; 5280 } 5281 break; 5282 5283 case DRX_AGC_CTRL_OFF: 5284 5285 /* Disable If AGC DAC */ 5286 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5287 if (rc != 0) { 5288 pr_err("error %d\n", rc); 5289 goto rw_error; 5290 } 5291 data &= (~IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE); 5292 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5293 if (rc != 0) { 5294 pr_err("error %d\n", rc); 5295 goto rw_error; 5296 } 5297 5298 /* Disable SCU IF AGC loop */ 5299 rc = (*scu_rr16)(dev_addr, SCU_RAM_AGC_KI__A, &data, 0); 5300 if (rc != 0) { 5301 pr_err("error %d\n", rc); 5302 goto rw_error; 5303 } 5304 data &= ~SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5305 data |= SCU_RAM_AGC_KI_IF_AGC_DISABLE__M; 5306 rc = (*scu_wr16)(dev_addr, SCU_RAM_AGC_KI__A, data, 0); 5307 if (rc != 0) { 5308 pr_err("error %d\n", rc); 5309 goto rw_error; 5310 } 5311 break; 5312 default: 5313 return -EINVAL; 5314 } /* switch ( agcsettings->ctrl_mode ) */ 5315 5316 /* always set the top to support configurations without if-loop */ 5317 rc = (*scu_wr16) (dev_addr, SCU_RAM_AGC_INGAIN_TGT_MIN__A, agc_settings->top, 0); 5318 if (rc != 0) { 5319 pr_err("error %d\n", rc); 5320 goto rw_error; 5321 } 5322 } 5323 5324 /* Store if agc settings */ 5325 switch (agc_settings->standard) { 5326 case DRX_STANDARD_8VSB: 5327 ext_attr->vsb_if_agc_cfg = *agc_settings; 5328 break; 5329 #ifndef DRXJ_VSB_ONLY 5330 case DRX_STANDARD_ITU_A: 5331 case DRX_STANDARD_ITU_B: 5332 case DRX_STANDARD_ITU_C: 5333 ext_attr->qam_if_agc_cfg = *agc_settings; 5334 break; 5335 #endif 5336 default: 5337 return -EIO; 5338 } 5339 5340 return 0; 5341 rw_error: 5342 return rc; 5343 } 5344 5345 /* 5346 * \fn int set_iqm_af () 5347 * \brief Configure IQM AF registers 5348 * \param demod instance of demodulator. 5349 * \param active 5350 * \return int. 5351 */ 5352 static int set_iqm_af(struct drx_demod_instance *demod, bool active) 5353 { 5354 u16 data = 0; 5355 struct i2c_device_addr *dev_addr = NULL; 5356 int rc; 5357 5358 dev_addr = demod->my_i2c_dev_addr; 5359 5360 /* Configure IQM */ 5361 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_STDBY__A, &data, 0); 5362 if (rc != 0) { 5363 pr_err("error %d\n", rc); 5364 goto rw_error; 5365 } 5366 if (!active) 5367 data &= ((~IQM_AF_STDBY_STDBY_ADC_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_AMP_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_PD_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE) & (~IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE)); 5368 else 5369 data |= (IQM_AF_STDBY_STDBY_ADC_A2_ACTIVE | IQM_AF_STDBY_STDBY_AMP_A2_ACTIVE | IQM_AF_STDBY_STDBY_PD_A2_ACTIVE | IQM_AF_STDBY_STDBY_TAGC_IF_A2_ACTIVE | IQM_AF_STDBY_STDBY_TAGC_RF_A2_ACTIVE); 5370 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, data, 0); 5371 if (rc != 0) { 5372 pr_err("error %d\n", rc); 5373 goto rw_error; 5374 } 5375 5376 return 0; 5377 rw_error: 5378 return rc; 5379 } 5380 5381 /*============================================================================*/ 5382 /*== END 8VSB & QAM COMMON DATAPATH FUNCTIONS ==*/ 5383 /*============================================================================*/ 5384 5385 /*============================================================================*/ 5386 /*============================================================================*/ 5387 /*== 8VSB DATAPATH FUNCTIONS ==*/ 5388 /*============================================================================*/ 5389 /*============================================================================*/ 5390 5391 /* 5392 * \fn int power_down_vsb () 5393 * \brief Powr down QAM related blocks. 5394 * \param demod instance of demodulator. 5395 * \param channel pointer to channel data. 5396 * \return int. 5397 */ 5398 static int power_down_vsb(struct drx_demod_instance *demod, bool primary) 5399 { 5400 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 5401 struct drxjscu_cmd cmd_scu = { /* command */ 0, 5402 /* parameter_len */ 0, 5403 /* result_len */ 0, 5404 /* *parameter */ NULL, 5405 /* *result */ NULL 5406 }; 5407 struct drx_cfg_mpeg_output cfg_mpeg_output; 5408 int rc; 5409 u16 cmd_result = 0; 5410 5411 /* 5412 STOP demodulator 5413 reset of FEC and VSB HW 5414 */ 5415 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB | 5416 SCU_RAM_COMMAND_CMD_DEMOD_STOP; 5417 cmd_scu.parameter_len = 0; 5418 cmd_scu.result_len = 1; 5419 cmd_scu.parameter = NULL; 5420 cmd_scu.result = &cmd_result; 5421 rc = scu_command(dev_addr, &cmd_scu); 5422 if (rc != 0) { 5423 pr_err("error %d\n", rc); 5424 goto rw_error; 5425 } 5426 5427 /* stop all comm_exec */ 5428 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 5429 if (rc != 0) { 5430 pr_err("error %d\n", rc); 5431 goto rw_error; 5432 } 5433 rc = drxj_dap_write_reg16(dev_addr, VSB_COMM_EXEC__A, VSB_COMM_EXEC_STOP, 0); 5434 if (rc != 0) { 5435 pr_err("error %d\n", rc); 5436 goto rw_error; 5437 } 5438 if (primary) { 5439 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_STOP, 0); 5440 if (rc != 0) { 5441 pr_err("error %d\n", rc); 5442 goto rw_error; 5443 } 5444 rc = set_iqm_af(demod, false); 5445 if (rc != 0) { 5446 pr_err("error %d\n", rc); 5447 goto rw_error; 5448 } 5449 } else { 5450 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 5451 if (rc != 0) { 5452 pr_err("error %d\n", rc); 5453 goto rw_error; 5454 } 5455 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 5456 if (rc != 0) { 5457 pr_err("error %d\n", rc); 5458 goto rw_error; 5459 } 5460 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 5461 if (rc != 0) { 5462 pr_err("error %d\n", rc); 5463 goto rw_error; 5464 } 5465 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 5466 if (rc != 0) { 5467 pr_err("error %d\n", rc); 5468 goto rw_error; 5469 } 5470 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 5471 if (rc != 0) { 5472 pr_err("error %d\n", rc); 5473 goto rw_error; 5474 } 5475 } 5476 5477 cfg_mpeg_output.enable_mpeg_output = false; 5478 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 5479 if (rc != 0) { 5480 pr_err("error %d\n", rc); 5481 goto rw_error; 5482 } 5483 5484 return 0; 5485 rw_error: 5486 return rc; 5487 } 5488 5489 /* 5490 * \fn int set_vsb_leak_n_gain () 5491 * \brief Set ATSC demod. 5492 * \param demod instance of demodulator. 5493 * \return int. 5494 */ 5495 static int set_vsb_leak_n_gain(struct drx_demod_instance *demod) 5496 { 5497 struct i2c_device_addr *dev_addr = NULL; 5498 int rc; 5499 5500 static const u8 vsb_ffe_leak_gain_ram0[] = { 5501 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO1 */ 5502 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO2 */ 5503 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO3 */ 5504 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO4 */ 5505 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO5 */ 5506 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO6 */ 5507 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO7 */ 5508 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO8 */ 5509 DRXJ_16TO8(0xf), /* FFETRAINLKRATIO9 */ 5510 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO10 */ 5511 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO11 */ 5512 DRXJ_16TO8(0x8), /* FFETRAINLKRATIO12 */ 5513 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO1 */ 5514 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO2 */ 5515 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO3 */ 5516 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO4 */ 5517 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO5 */ 5518 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO6 */ 5519 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO7 */ 5520 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO8 */ 5521 DRXJ_16TO8(0x20), /* FFERCA1TRAINLKRATIO9 */ 5522 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO10 */ 5523 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO11 */ 5524 DRXJ_16TO8(0x10), /* FFERCA1TRAINLKRATIO12 */ 5525 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO1 */ 5526 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO2 */ 5527 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO3 */ 5528 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO4 */ 5529 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO5 */ 5530 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO6 */ 5531 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO7 */ 5532 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO8 */ 5533 DRXJ_16TO8(0x20), /* FFERCA1DATALKRATIO9 */ 5534 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO10 */ 5535 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO11 */ 5536 DRXJ_16TO8(0x10), /* FFERCA1DATALKRATIO12 */ 5537 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO1 */ 5538 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO2 */ 5539 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO3 */ 5540 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO4 */ 5541 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO5 */ 5542 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO6 */ 5543 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO7 */ 5544 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO8 */ 5545 DRXJ_16TO8(0x20), /* FFERCA2TRAINLKRATIO9 */ 5546 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO10 */ 5547 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO11 */ 5548 DRXJ_16TO8(0x10), /* FFERCA2TRAINLKRATIO12 */ 5549 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO1 */ 5550 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO2 */ 5551 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO3 */ 5552 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO4 */ 5553 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO5 */ 5554 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO6 */ 5555 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO7 */ 5556 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO8 */ 5557 DRXJ_16TO8(0x20), /* FFERCA2DATALKRATIO9 */ 5558 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO10 */ 5559 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO11 */ 5560 DRXJ_16TO8(0x10), /* FFERCA2DATALKRATIO12 */ 5561 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO1 */ 5562 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO2 */ 5563 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO3 */ 5564 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO4 */ 5565 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO5 */ 5566 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO6 */ 5567 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO7 */ 5568 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO8 */ 5569 DRXJ_16TO8(0x0e), /* FFEDDM1TRAINLKRATIO9 */ 5570 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO10 */ 5571 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO11 */ 5572 DRXJ_16TO8(0x07), /* FFEDDM1TRAINLKRATIO12 */ 5573 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO1 */ 5574 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO2 */ 5575 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO3 */ 5576 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO4 */ 5577 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO5 */ 5578 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO6 */ 5579 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO7 */ 5580 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO8 */ 5581 DRXJ_16TO8(0x0e), /* FFEDDM1DATALKRATIO9 */ 5582 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO10 */ 5583 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO11 */ 5584 DRXJ_16TO8(0x07), /* FFEDDM1DATALKRATIO12 */ 5585 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO1 */ 5586 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO2 */ 5587 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO3 */ 5588 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO4 */ 5589 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO5 */ 5590 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO6 */ 5591 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO7 */ 5592 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO8 */ 5593 DRXJ_16TO8(0x0c), /* FFEDDM2TRAINLKRATIO9 */ 5594 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO10 */ 5595 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO11 */ 5596 DRXJ_16TO8(0x06), /* FFEDDM2TRAINLKRATIO12 */ 5597 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO1 */ 5598 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO2 */ 5599 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO3 */ 5600 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO4 */ 5601 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO5 */ 5602 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO6 */ 5603 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO7 */ 5604 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO8 */ 5605 DRXJ_16TO8(0x0c), /* FFEDDM2DATALKRATIO9 */ 5606 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO10 */ 5607 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO11 */ 5608 DRXJ_16TO8(0x06), /* FFEDDM2DATALKRATIO12 */ 5609 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN1 */ 5610 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN2 */ 5611 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN3 */ 5612 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN4 */ 5613 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN5 */ 5614 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN6 */ 5615 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN7 */ 5616 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN8 */ 5617 DRXJ_16TO8(0x4040), /* FIRTRAINGAIN9 */ 5618 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN10 */ 5619 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN11 */ 5620 DRXJ_16TO8(0x2020), /* FIRTRAINGAIN12 */ 5621 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN1 */ 5622 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN2 */ 5623 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN3 */ 5624 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN4 */ 5625 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN5 */ 5626 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN6 */ 5627 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN7 */ 5628 DRXJ_16TO8(0x1010) /* FIRRCA1GAIN8 */ 5629 }; 5630 5631 static const u8 vsb_ffe_leak_gain_ram1[] = { 5632 DRXJ_16TO8(0x1010), /* FIRRCA1GAIN9 */ 5633 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN10 */ 5634 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN11 */ 5635 DRXJ_16TO8(0x0808), /* FIRRCA1GAIN12 */ 5636 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN1 */ 5637 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN2 */ 5638 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN3 */ 5639 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN4 */ 5640 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN5 */ 5641 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN6 */ 5642 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN7 */ 5643 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN8 */ 5644 DRXJ_16TO8(0x1010), /* FIRRCA2GAIN9 */ 5645 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN10 */ 5646 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN11 */ 5647 DRXJ_16TO8(0x0808), /* FIRRCA2GAIN12 */ 5648 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN1 */ 5649 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN2 */ 5650 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN3 */ 5651 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN4 */ 5652 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN5 */ 5653 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN6 */ 5654 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN7 */ 5655 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN8 */ 5656 DRXJ_16TO8(0x0606), /* FIRDDM1GAIN9 */ 5657 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN10 */ 5658 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN11 */ 5659 DRXJ_16TO8(0x0303), /* FIRDDM1GAIN12 */ 5660 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN1 */ 5661 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN2 */ 5662 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN3 */ 5663 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN4 */ 5664 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN5 */ 5665 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN6 */ 5666 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN7 */ 5667 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN8 */ 5668 DRXJ_16TO8(0x0505), /* FIRDDM2GAIN9 */ 5669 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN10 */ 5670 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN11 */ 5671 DRXJ_16TO8(0x0303), /* FIRDDM2GAIN12 */ 5672 DRXJ_16TO8(0x001f), /* DFETRAINLKRATIO */ 5673 DRXJ_16TO8(0x01ff), /* DFERCA1TRAINLKRATIO */ 5674 DRXJ_16TO8(0x01ff), /* DFERCA1DATALKRATIO */ 5675 DRXJ_16TO8(0x004f), /* DFERCA2TRAINLKRATIO */ 5676 DRXJ_16TO8(0x004f), /* DFERCA2DATALKRATIO */ 5677 DRXJ_16TO8(0x01ff), /* DFEDDM1TRAINLKRATIO */ 5678 DRXJ_16TO8(0x01ff), /* DFEDDM1DATALKRATIO */ 5679 DRXJ_16TO8(0x0352), /* DFEDDM2TRAINLKRATIO */ 5680 DRXJ_16TO8(0x0352), /* DFEDDM2DATALKRATIO */ 5681 DRXJ_16TO8(0x0000), /* DFETRAINGAIN */ 5682 DRXJ_16TO8(0x2020), /* DFERCA1GAIN */ 5683 DRXJ_16TO8(0x1010), /* DFERCA2GAIN */ 5684 DRXJ_16TO8(0x1818), /* DFEDDM1GAIN */ 5685 DRXJ_16TO8(0x1212) /* DFEDDM2GAIN */ 5686 }; 5687 5688 dev_addr = demod->my_i2c_dev_addr; 5689 rc = drxdap_fasi_write_block(dev_addr, VSB_SYSCTRL_RAM0_FFETRAINLKRATIO1__A, sizeof(vsb_ffe_leak_gain_ram0), ((u8 *)vsb_ffe_leak_gain_ram0), 0); 5690 if (rc != 0) { 5691 pr_err("error %d\n", rc); 5692 goto rw_error; 5693 } 5694 rc = drxdap_fasi_write_block(dev_addr, VSB_SYSCTRL_RAM1_FIRRCA1GAIN9__A, sizeof(vsb_ffe_leak_gain_ram1), ((u8 *)vsb_ffe_leak_gain_ram1), 0); 5695 if (rc != 0) { 5696 pr_err("error %d\n", rc); 5697 goto rw_error; 5698 } 5699 5700 return 0; 5701 rw_error: 5702 return rc; 5703 } 5704 5705 /* 5706 * \fn int set_vsb() 5707 * \brief Set 8VSB demod. 5708 * \param demod instance of demodulator. 5709 * \return int. 5710 * 5711 */ 5712 static int set_vsb(struct drx_demod_instance *demod) 5713 { 5714 struct i2c_device_addr *dev_addr = NULL; 5715 int rc; 5716 struct drx_common_attr *common_attr = NULL; 5717 struct drxjscu_cmd cmd_scu; 5718 struct drxj_data *ext_attr = NULL; 5719 u16 cmd_result = 0; 5720 u16 cmd_param = 0; 5721 static const u8 vsb_taps_re[] = { 5722 DRXJ_16TO8(-2), /* re0 */ 5723 DRXJ_16TO8(4), /* re1 */ 5724 DRXJ_16TO8(1), /* re2 */ 5725 DRXJ_16TO8(-4), /* re3 */ 5726 DRXJ_16TO8(1), /* re4 */ 5727 DRXJ_16TO8(4), /* re5 */ 5728 DRXJ_16TO8(-3), /* re6 */ 5729 DRXJ_16TO8(-3), /* re7 */ 5730 DRXJ_16TO8(6), /* re8 */ 5731 DRXJ_16TO8(1), /* re9 */ 5732 DRXJ_16TO8(-9), /* re10 */ 5733 DRXJ_16TO8(3), /* re11 */ 5734 DRXJ_16TO8(12), /* re12 */ 5735 DRXJ_16TO8(-9), /* re13 */ 5736 DRXJ_16TO8(-15), /* re14 */ 5737 DRXJ_16TO8(17), /* re15 */ 5738 DRXJ_16TO8(19), /* re16 */ 5739 DRXJ_16TO8(-29), /* re17 */ 5740 DRXJ_16TO8(-22), /* re18 */ 5741 DRXJ_16TO8(45), /* re19 */ 5742 DRXJ_16TO8(25), /* re20 */ 5743 DRXJ_16TO8(-70), /* re21 */ 5744 DRXJ_16TO8(-28), /* re22 */ 5745 DRXJ_16TO8(111), /* re23 */ 5746 DRXJ_16TO8(30), /* re24 */ 5747 DRXJ_16TO8(-201), /* re25 */ 5748 DRXJ_16TO8(-31), /* re26 */ 5749 DRXJ_16TO8(629) /* re27 */ 5750 }; 5751 5752 dev_addr = demod->my_i2c_dev_addr; 5753 common_attr = (struct drx_common_attr *) demod->my_common_attr; 5754 ext_attr = (struct drxj_data *) demod->my_ext_attr; 5755 5756 /* stop all comm_exec */ 5757 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 5758 if (rc != 0) { 5759 pr_err("error %d\n", rc); 5760 goto rw_error; 5761 } 5762 rc = drxj_dap_write_reg16(dev_addr, VSB_COMM_EXEC__A, VSB_COMM_EXEC_STOP, 0); 5763 if (rc != 0) { 5764 pr_err("error %d\n", rc); 5765 goto rw_error; 5766 } 5767 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 5768 if (rc != 0) { 5769 pr_err("error %d\n", rc); 5770 goto rw_error; 5771 } 5772 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 5773 if (rc != 0) { 5774 pr_err("error %d\n", rc); 5775 goto rw_error; 5776 } 5777 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 5778 if (rc != 0) { 5779 pr_err("error %d\n", rc); 5780 goto rw_error; 5781 } 5782 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 5783 if (rc != 0) { 5784 pr_err("error %d\n", rc); 5785 goto rw_error; 5786 } 5787 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 5788 if (rc != 0) { 5789 pr_err("error %d\n", rc); 5790 goto rw_error; 5791 } 5792 5793 /* reset demodulator */ 5794 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB 5795 | SCU_RAM_COMMAND_CMD_DEMOD_RESET; 5796 cmd_scu.parameter_len = 0; 5797 cmd_scu.result_len = 1; 5798 cmd_scu.parameter = NULL; 5799 cmd_scu.result = &cmd_result; 5800 rc = scu_command(dev_addr, &cmd_scu); 5801 if (rc != 0) { 5802 pr_err("error %d\n", rc); 5803 goto rw_error; 5804 } 5805 5806 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_DCF_BYPASS__A, 1, 0); 5807 if (rc != 0) { 5808 pr_err("error %d\n", rc); 5809 goto rw_error; 5810 } 5811 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_ADJ_SEL__A, IQM_FS_ADJ_SEL_B_VSB, 0); 5812 if (rc != 0) { 5813 pr_err("error %d\n", rc); 5814 goto rw_error; 5815 } 5816 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_ADJ_SEL__A, IQM_RC_ADJ_SEL_B_VSB, 0); 5817 if (rc != 0) { 5818 pr_err("error %d\n", rc); 5819 goto rw_error; 5820 } 5821 ext_attr->iqm_rc_rate_ofs = 0x00AD0D79; 5822 rc = drxdap_fasi_write_reg32(dev_addr, IQM_RC_RATE_OFS_LO__A, ext_attr->iqm_rc_rate_ofs, 0); 5823 if (rc != 0) { 5824 pr_err("error %d\n", rc); 5825 goto rw_error; 5826 } 5827 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CFAGC_GAINSHIFT__A, 4, 0); 5828 if (rc != 0) { 5829 pr_err("error %d\n", rc); 5830 goto rw_error; 5831 } 5832 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN1TRK__A, 1, 0); 5833 if (rc != 0) { 5834 pr_err("error %d\n", rc); 5835 goto rw_error; 5836 } 5837 5838 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_CROUT_ENA__A, 1, 0); 5839 if (rc != 0) { 5840 pr_err("error %d\n", rc); 5841 goto rw_error; 5842 } 5843 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_STRETCH__A, 28, 0); 5844 if (rc != 0) { 5845 pr_err("error %d\n", rc); 5846 goto rw_error; 5847 } 5848 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_ACTIVE__A, 0, 0); 5849 if (rc != 0) { 5850 pr_err("error %d\n", rc); 5851 goto rw_error; 5852 } 5853 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SYMMETRIC__A, 0, 0); 5854 if (rc != 0) { 5855 pr_err("error %d\n", rc); 5856 goto rw_error; 5857 } 5858 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_MIDTAP__A, 3, 0); 5859 if (rc != 0) { 5860 pr_err("error %d\n", rc); 5861 goto rw_error; 5862 } 5863 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_OUT_ENA__A, IQM_CF_OUT_ENA_VSB__M, 0); 5864 if (rc != 0) { 5865 pr_err("error %d\n", rc); 5866 goto rw_error; 5867 } 5868 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE__A, 1393, 0); 5869 if (rc != 0) { 5870 pr_err("error %d\n", rc); 5871 goto rw_error; 5872 } 5873 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE_SH__A, 0, 0); 5874 if (rc != 0) { 5875 pr_err("error %d\n", rc); 5876 goto rw_error; 5877 } 5878 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_POW_MEAS_LEN__A, 1, 0); 5879 if (rc != 0) { 5880 pr_err("error %d\n", rc); 5881 goto rw_error; 5882 } 5883 5884 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(vsb_taps_re), ((u8 *)vsb_taps_re), 0); 5885 if (rc != 0) { 5886 pr_err("error %d\n", rc); 5887 goto rw_error; 5888 } 5889 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(vsb_taps_re), ((u8 *)vsb_taps_re), 0); 5890 if (rc != 0) { 5891 pr_err("error %d\n", rc); 5892 goto rw_error; 5893 } 5894 5895 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_BNTHRESH__A, 330, 0); 5896 if (rc != 0) { 5897 pr_err("error %d\n", rc); 5898 goto rw_error; 5899 } /* set higher threshold */ 5900 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CLPLASTNUM__A, 90, 0); 5901 if (rc != 0) { 5902 pr_err("error %d\n", rc); 5903 goto rw_error; 5904 } /* burst detection on */ 5905 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_RCA1__A, 0x0042, 0); 5906 if (rc != 0) { 5907 pr_err("error %d\n", rc); 5908 goto rw_error; 5909 } /* drop thresholds by 1 dB */ 5910 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_RCA2__A, 0x0053, 0); 5911 if (rc != 0) { 5912 pr_err("error %d\n", rc); 5913 goto rw_error; 5914 } /* drop thresholds by 2 dB */ 5915 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_EQCTRL__A, 0x1, 0); 5916 if (rc != 0) { 5917 pr_err("error %d\n", rc); 5918 goto rw_error; 5919 } /* cma on */ 5920 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_GPIO__A, 0, 0); 5921 if (rc != 0) { 5922 pr_err("error %d\n", rc); 5923 goto rw_error; 5924 } /* GPIO */ 5925 5926 /* Initialize the FEC Subsystem */ 5927 rc = drxj_dap_write_reg16(dev_addr, FEC_TOP_ANNEX__A, FEC_TOP_ANNEX_D, 0); 5928 if (rc != 0) { 5929 pr_err("error %d\n", rc); 5930 goto rw_error; 5931 } 5932 { 5933 u16 fec_oc_snc_mode = 0; 5934 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode, 0); 5935 if (rc != 0) { 5936 pr_err("error %d\n", rc); 5937 goto rw_error; 5938 } 5939 /* output data even when not locked */ 5940 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_MODE__A, fec_oc_snc_mode | FEC_OC_SNC_MODE_UNLOCK_ENABLE__M, 0); 5941 if (rc != 0) { 5942 pr_err("error %d\n", rc); 5943 goto rw_error; 5944 } 5945 } 5946 5947 /* set clip */ 5948 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_LEN__A, 0, 0); 5949 if (rc != 0) { 5950 pr_err("error %d\n", rc); 5951 goto rw_error; 5952 } 5953 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_TH__A, 470, 0); 5954 if (rc != 0) { 5955 pr_err("error %d\n", rc); 5956 goto rw_error; 5957 } 5958 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_SNS_LEN__A, 0, 0); 5959 if (rc != 0) { 5960 pr_err("error %d\n", rc); 5961 goto rw_error; 5962 } 5963 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_PT__A, 0xD4, 0); 5964 if (rc != 0) { 5965 pr_err("error %d\n", rc); 5966 goto rw_error; 5967 } 5968 /* no transparent, no A&C framing; parity is set in mpegoutput */ 5969 { 5970 u16 fec_oc_reg_mode = 0; 5971 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_MODE__A, &fec_oc_reg_mode, 0); 5972 if (rc != 0) { 5973 pr_err("error %d\n", rc); 5974 goto rw_error; 5975 } 5976 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_MODE__A, fec_oc_reg_mode & (~(FEC_OC_MODE_TRANSPARENT__M | FEC_OC_MODE_CLEAR__M | FEC_OC_MODE_RETAIN_FRAMING__M)), 0); 5977 if (rc != 0) { 5978 pr_err("error %d\n", rc); 5979 goto rw_error; 5980 } 5981 } 5982 5983 rc = drxj_dap_write_reg16(dev_addr, FEC_DI_TIMEOUT_LO__A, 0, 0); 5984 if (rc != 0) { 5985 pr_err("error %d\n", rc); 5986 goto rw_error; 5987 } /* timeout counter for restarting */ 5988 rc = drxj_dap_write_reg16(dev_addr, FEC_DI_TIMEOUT_HI__A, 3, 0); 5989 if (rc != 0) { 5990 pr_err("error %d\n", rc); 5991 goto rw_error; 5992 } 5993 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MODE__A, 0, 0); 5994 if (rc != 0) { 5995 pr_err("error %d\n", rc); 5996 goto rw_error; 5997 } /* bypass disabled */ 5998 /* initialize RS packet error measurement parameters */ 5999 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PERIOD__A, FEC_RS_MEASUREMENT_PERIOD, 0); 6000 if (rc != 0) { 6001 pr_err("error %d\n", rc); 6002 goto rw_error; 6003 } 6004 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PRESCALE__A, FEC_RS_MEASUREMENT_PRESCALE, 0); 6005 if (rc != 0) { 6006 pr_err("error %d\n", rc); 6007 goto rw_error; 6008 } 6009 6010 /* init measurement period of MER/SER */ 6011 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_MEASUREMENT_PERIOD__A, VSB_TOP_MEASUREMENT_PERIOD, 0); 6012 if (rc != 0) { 6013 pr_err("error %d\n", rc); 6014 goto rw_error; 6015 } 6016 rc = drxdap_fasi_write_reg32(dev_addr, SCU_RAM_FEC_ACCUM_CW_CORRECTED_LO__A, 0, 0); 6017 if (rc != 0) { 6018 pr_err("error %d\n", rc); 6019 goto rw_error; 6020 } 6021 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_MEAS_COUNT__A, 0, 0); 6022 if (rc != 0) { 6023 pr_err("error %d\n", rc); 6024 goto rw_error; 6025 } 6026 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0, 0); 6027 if (rc != 0) { 6028 pr_err("error %d\n", rc); 6029 goto rw_error; 6030 } 6031 6032 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CKGN1TRK__A, 128, 0); 6033 if (rc != 0) { 6034 pr_err("error %d\n", rc); 6035 goto rw_error; 6036 } 6037 /* B-Input to ADC, PGA+filter in standby */ 6038 if (!ext_attr->has_lna) { 6039 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AMUX__A, 0x02, 0); 6040 if (rc != 0) { 6041 pr_err("error %d\n", rc); 6042 goto rw_error; 6043 } 6044 } 6045 6046 /* turn on IQMAF. It has to be in front of setAgc**() */ 6047 rc = set_iqm_af(demod, true); 6048 if (rc != 0) { 6049 pr_err("error %d\n", rc); 6050 goto rw_error; 6051 } 6052 rc = adc_synchronization(demod); 6053 if (rc != 0) { 6054 pr_err("error %d\n", rc); 6055 goto rw_error; 6056 } 6057 6058 rc = init_agc(demod); 6059 if (rc != 0) { 6060 pr_err("error %d\n", rc); 6061 goto rw_error; 6062 } 6063 rc = set_agc_if(demod, &(ext_attr->vsb_if_agc_cfg), false); 6064 if (rc != 0) { 6065 pr_err("error %d\n", rc); 6066 goto rw_error; 6067 } 6068 rc = set_agc_rf(demod, &(ext_attr->vsb_rf_agc_cfg), false); 6069 if (rc != 0) { 6070 pr_err("error %d\n", rc); 6071 goto rw_error; 6072 } 6073 { 6074 /* TODO fix this, store a struct drxj_cfg_afe_gain structure in struct drxj_data instead 6075 of only the gain */ 6076 struct drxj_cfg_afe_gain vsb_pga_cfg = { DRX_STANDARD_8VSB, 0 }; 6077 6078 vsb_pga_cfg.gain = ext_attr->vsb_pga_cfg; 6079 rc = ctrl_set_cfg_afe_gain(demod, &vsb_pga_cfg); 6080 if (rc != 0) { 6081 pr_err("error %d\n", rc); 6082 goto rw_error; 6083 } 6084 } 6085 rc = ctrl_set_cfg_pre_saw(demod, &(ext_attr->vsb_pre_saw_cfg)); 6086 if (rc != 0) { 6087 pr_err("error %d\n", rc); 6088 goto rw_error; 6089 } 6090 6091 /* Mpeg output has to be in front of FEC active */ 6092 rc = set_mpegtei_handling(demod); 6093 if (rc != 0) { 6094 pr_err("error %d\n", rc); 6095 goto rw_error; 6096 } 6097 rc = bit_reverse_mpeg_output(demod); 6098 if (rc != 0) { 6099 pr_err("error %d\n", rc); 6100 goto rw_error; 6101 } 6102 rc = set_mpeg_start_width(demod); 6103 if (rc != 0) { 6104 pr_err("error %d\n", rc); 6105 goto rw_error; 6106 } 6107 { 6108 /* TODO: move to set_standard after hardware reset value problem is solved */ 6109 /* Configure initial MPEG output */ 6110 struct drx_cfg_mpeg_output cfg_mpeg_output; 6111 6112 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 6113 cfg_mpeg_output.enable_mpeg_output = true; 6114 6115 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 6116 if (rc != 0) { 6117 pr_err("error %d\n", rc); 6118 goto rw_error; 6119 } 6120 } 6121 6122 /* TBD: what parameters should be set */ 6123 cmd_param = 0x00; /* Default mode AGC on, etc */ 6124 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB 6125 | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM; 6126 cmd_scu.parameter_len = 1; 6127 cmd_scu.result_len = 1; 6128 cmd_scu.parameter = &cmd_param; 6129 cmd_scu.result = &cmd_result; 6130 rc = scu_command(dev_addr, &cmd_scu); 6131 if (rc != 0) { 6132 pr_err("error %d\n", rc); 6133 goto rw_error; 6134 } 6135 6136 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_BEAGC_GAINSHIFT__A, 0x0004, 0); 6137 if (rc != 0) { 6138 pr_err("error %d\n", rc); 6139 goto rw_error; 6140 } 6141 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SNRTH_PT__A, 0x00D2, 0); 6142 if (rc != 0) { 6143 pr_err("error %d\n", rc); 6144 goto rw_error; 6145 } 6146 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_SYSSMTRNCTRL__A, VSB_TOP_SYSSMTRNCTRL__PRE | VSB_TOP_SYSSMTRNCTRL_NCOTIMEOUTCNTEN__M, 0); 6147 if (rc != 0) { 6148 pr_err("error %d\n", rc); 6149 goto rw_error; 6150 } 6151 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_BEDETCTRL__A, 0x142, 0); 6152 if (rc != 0) { 6153 pr_err("error %d\n", rc); 6154 goto rw_error; 6155 } 6156 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_LBAGCREFLVL__A, 640, 0); 6157 if (rc != 0) { 6158 pr_err("error %d\n", rc); 6159 goto rw_error; 6160 } 6161 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN1ACQ__A, 4, 0); 6162 if (rc != 0) { 6163 pr_err("error %d\n", rc); 6164 goto rw_error; 6165 } 6166 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN1TRK__A, 2, 0); 6167 if (rc != 0) { 6168 pr_err("error %d\n", rc); 6169 goto rw_error; 6170 } 6171 rc = drxj_dap_write_reg16(dev_addr, VSB_TOP_CYGN2TRK__A, 3, 0); 6172 if (rc != 0) { 6173 pr_err("error %d\n", rc); 6174 goto rw_error; 6175 } 6176 6177 /* start demodulator */ 6178 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB 6179 | SCU_RAM_COMMAND_CMD_DEMOD_START; 6180 cmd_scu.parameter_len = 0; 6181 cmd_scu.result_len = 1; 6182 cmd_scu.parameter = NULL; 6183 cmd_scu.result = &cmd_result; 6184 rc = scu_command(dev_addr, &cmd_scu); 6185 if (rc != 0) { 6186 pr_err("error %d\n", rc); 6187 goto rw_error; 6188 } 6189 6190 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_ACTIVE, 0); 6191 if (rc != 0) { 6192 pr_err("error %d\n", rc); 6193 goto rw_error; 6194 } 6195 rc = drxj_dap_write_reg16(dev_addr, VSB_COMM_EXEC__A, VSB_COMM_EXEC_ACTIVE, 0); 6196 if (rc != 0) { 6197 pr_err("error %d\n", rc); 6198 goto rw_error; 6199 } 6200 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE, 0); 6201 if (rc != 0) { 6202 pr_err("error %d\n", rc); 6203 goto rw_error; 6204 } 6205 6206 return 0; 6207 rw_error: 6208 return rc; 6209 } 6210 6211 /* 6212 * \fn static short get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, u16 *PckErrs) 6213 * \brief Get the values of packet error in 8VSB mode 6214 * \return Error code 6215 */ 6216 static int get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, 6217 u32 *pck_errs, u32 *pck_count) 6218 { 6219 int rc; 6220 u16 data = 0; 6221 u16 period = 0; 6222 u16 prescale = 0; 6223 u16 packet_errors_mant = 0; 6224 u16 packet_errors_exp = 0; 6225 6226 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_FAILURES__A, &data, 0); 6227 if (rc != 0) { 6228 pr_err("error %d\n", rc); 6229 goto rw_error; 6230 } 6231 packet_errors_mant = data & FEC_RS_NR_FAILURES_FIXED_MANT__M; 6232 packet_errors_exp = (data & FEC_RS_NR_FAILURES_EXP__M) 6233 >> FEC_RS_NR_FAILURES_EXP__B; 6234 period = FEC_RS_MEASUREMENT_PERIOD; 6235 prescale = FEC_RS_MEASUREMENT_PRESCALE; 6236 /* packet error rate = (error packet number) per second */ 6237 /* 77.3 us is time for per packet */ 6238 if (period * prescale == 0) { 6239 pr_err("error: period and/or prescale is zero!\n"); 6240 return -EIO; 6241 } 6242 *pck_errs = packet_errors_mant * (1 << packet_errors_exp); 6243 *pck_count = period * prescale * 77; 6244 6245 return 0; 6246 rw_error: 6247 return rc; 6248 } 6249 6250 /* 6251 * \fn static short GetVSBBer(struct i2c_device_addr *dev_addr, u32 *ber) 6252 * \brief Get the values of ber in VSB mode 6253 * \return Error code 6254 */ 6255 static int get_vs_bpost_viterbi_ber(struct i2c_device_addr *dev_addr, 6256 u32 *ber, u32 *cnt) 6257 { 6258 int rc; 6259 u16 data = 0; 6260 u16 period = 0; 6261 u16 prescale = 0; 6262 u16 bit_errors_mant = 0; 6263 u16 bit_errors_exp = 0; 6264 6265 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_BIT_ERRORS__A, &data, 0); 6266 if (rc != 0) { 6267 pr_err("error %d\n", rc); 6268 goto rw_error; 6269 } 6270 period = FEC_RS_MEASUREMENT_PERIOD; 6271 prescale = FEC_RS_MEASUREMENT_PRESCALE; 6272 6273 bit_errors_mant = data & FEC_RS_NR_BIT_ERRORS_FIXED_MANT__M; 6274 bit_errors_exp = (data & FEC_RS_NR_BIT_ERRORS_EXP__M) 6275 >> FEC_RS_NR_BIT_ERRORS_EXP__B; 6276 6277 *cnt = period * prescale * 207 * ((bit_errors_exp > 2) ? 1 : 8); 6278 6279 if (((bit_errors_mant << bit_errors_exp) >> 3) > 68700) 6280 *ber = (*cnt) * 26570; 6281 else { 6282 if (period * prescale == 0) { 6283 pr_err("error: period and/or prescale is zero!\n"); 6284 return -EIO; 6285 } 6286 *ber = bit_errors_mant << ((bit_errors_exp > 2) ? 6287 (bit_errors_exp - 3) : bit_errors_exp); 6288 } 6289 6290 return 0; 6291 rw_error: 6292 return rc; 6293 } 6294 6295 /* 6296 * \fn static short get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber) 6297 * \brief Get the values of ber in VSB mode 6298 * \return Error code 6299 */ 6300 static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, 6301 u32 *ber, u32 *cnt) 6302 { 6303 u16 data = 0; 6304 int rc; 6305 6306 rc = drxj_dap_read_reg16(dev_addr, VSB_TOP_NR_SYM_ERRS__A, &data, 0); 6307 if (rc != 0) { 6308 pr_err("error %d\n", rc); 6309 return -EIO; 6310 } 6311 *ber = data; 6312 *cnt = VSB_TOP_MEASUREMENT_PERIOD * SYMBOLS_PER_SEGMENT; 6313 6314 return 0; 6315 } 6316 6317 /* 6318 * \fn static int get_vsbmer(struct i2c_device_addr *dev_addr, u16 *mer) 6319 * \brief Get the values of MER 6320 * \return Error code 6321 */ 6322 static int get_vsbmer(struct i2c_device_addr *dev_addr, u16 *mer) 6323 { 6324 int rc; 6325 u16 data_hi = 0; 6326 6327 rc = drxj_dap_read_reg16(dev_addr, VSB_TOP_ERR_ENERGY_H__A, &data_hi, 0); 6328 if (rc != 0) { 6329 pr_err("error %d\n", rc); 6330 goto rw_error; 6331 } 6332 *mer = 6333 (u16) (log1_times100(21504) - log1_times100((data_hi << 6) / 52)); 6334 6335 return 0; 6336 rw_error: 6337 return rc; 6338 } 6339 6340 6341 /*============================================================================*/ 6342 /*== END 8VSB DATAPATH FUNCTIONS ==*/ 6343 /*============================================================================*/ 6344 6345 /*============================================================================*/ 6346 /*============================================================================*/ 6347 /*== QAM DATAPATH FUNCTIONS ==*/ 6348 /*============================================================================*/ 6349 /*============================================================================*/ 6350 6351 /* 6352 * \fn int power_down_qam () 6353 * \brief Powr down QAM related blocks. 6354 * \param demod instance of demodulator. 6355 * \param channel pointer to channel data. 6356 * \return int. 6357 */ 6358 static int power_down_qam(struct drx_demod_instance *demod, bool primary) 6359 { 6360 struct drxjscu_cmd cmd_scu = { /* command */ 0, 6361 /* parameter_len */ 0, 6362 /* result_len */ 0, 6363 /* *parameter */ NULL, 6364 /* *result */ NULL 6365 }; 6366 int rc; 6367 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 6368 struct drx_cfg_mpeg_output cfg_mpeg_output; 6369 struct drx_common_attr *common_attr = demod->my_common_attr; 6370 u16 cmd_result = 0; 6371 6372 /* 6373 STOP demodulator 6374 resets IQM, QAM and FEC HW blocks 6375 */ 6376 /* stop all comm_exec */ 6377 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 6378 if (rc != 0) { 6379 pr_err("error %d\n", rc); 6380 goto rw_error; 6381 } 6382 rc = drxj_dap_write_reg16(dev_addr, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP, 0); 6383 if (rc != 0) { 6384 pr_err("error %d\n", rc); 6385 goto rw_error; 6386 } 6387 6388 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 6389 SCU_RAM_COMMAND_CMD_DEMOD_STOP; 6390 cmd_scu.parameter_len = 0; 6391 cmd_scu.result_len = 1; 6392 cmd_scu.parameter = NULL; 6393 cmd_scu.result = &cmd_result; 6394 rc = scu_command(dev_addr, &cmd_scu); 6395 if (rc != 0) { 6396 pr_err("error %d\n", rc); 6397 goto rw_error; 6398 } 6399 6400 if (primary) { 6401 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_STOP, 0); 6402 if (rc != 0) { 6403 pr_err("error %d\n", rc); 6404 goto rw_error; 6405 } 6406 rc = set_iqm_af(demod, false); 6407 if (rc != 0) { 6408 pr_err("error %d\n", rc); 6409 goto rw_error; 6410 } 6411 } else { 6412 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 6413 if (rc != 0) { 6414 pr_err("error %d\n", rc); 6415 goto rw_error; 6416 } 6417 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 6418 if (rc != 0) { 6419 pr_err("error %d\n", rc); 6420 goto rw_error; 6421 } 6422 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 6423 if (rc != 0) { 6424 pr_err("error %d\n", rc); 6425 goto rw_error; 6426 } 6427 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 6428 if (rc != 0) { 6429 pr_err("error %d\n", rc); 6430 goto rw_error; 6431 } 6432 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 6433 if (rc != 0) { 6434 pr_err("error %d\n", rc); 6435 goto rw_error; 6436 } 6437 } 6438 6439 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 6440 cfg_mpeg_output.enable_mpeg_output = false; 6441 6442 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 6443 if (rc != 0) { 6444 pr_err("error %d\n", rc); 6445 goto rw_error; 6446 } 6447 6448 return 0; 6449 rw_error: 6450 return rc; 6451 } 6452 6453 /*============================================================================*/ 6454 6455 /* 6456 * \fn int set_qam_measurement () 6457 * \brief Setup of the QAM Measuremnt intervals for signal quality 6458 * \param demod instance of demod. 6459 * \param constellation current constellation. 6460 * \return int. 6461 * 6462 * NOTE: 6463 * Take into account that for certain settings the errorcounters can overflow. 6464 * The implementation does not check this. 6465 * 6466 * TODO: overriding the ext_attr->fec_bits_desired by constellation dependent 6467 * constants to get a measurement period of approx. 1 sec. Remove fec_bits_desired 6468 * field ? 6469 * 6470 */ 6471 #ifndef DRXJ_VSB_ONLY 6472 static int 6473 set_qam_measurement(struct drx_demod_instance *demod, 6474 enum drx_modulation constellation, u32 symbol_rate) 6475 { 6476 struct i2c_device_addr *dev_addr = NULL; /* device address for I2C writes */ 6477 struct drxj_data *ext_attr = NULL; /* Global data container for DRXJ specific data */ 6478 int rc; 6479 u32 fec_bits_desired = 0; /* BER accounting period */ 6480 u16 fec_rs_plen = 0; /* defines RS BER measurement period */ 6481 u16 fec_rs_prescale = 0; /* ReedSolomon Measurement Prescale */ 6482 u32 fec_rs_period = 0; /* Value for corresponding I2C register */ 6483 u32 fec_rs_bit_cnt = 0; /* Actual precise amount of bits */ 6484 u32 fec_oc_snc_fail_period = 0; /* Value for corresponding I2C register */ 6485 u32 qam_vd_period = 0; /* Value for corresponding I2C register */ 6486 u32 qam_vd_bit_cnt = 0; /* Actual precise amount of bits */ 6487 u16 fec_vd_plen = 0; /* no of trellis symbols: VD SER measur period */ 6488 u16 qam_vd_prescale = 0; /* Viterbi Measurement Prescale */ 6489 6490 dev_addr = demod->my_i2c_dev_addr; 6491 ext_attr = (struct drxj_data *) demod->my_ext_attr; 6492 6493 fec_bits_desired = ext_attr->fec_bits_desired; 6494 fec_rs_prescale = ext_attr->fec_rs_prescale; 6495 6496 switch (constellation) { 6497 case DRX_CONSTELLATION_QAM16: 6498 fec_bits_desired = 4 * symbol_rate; 6499 break; 6500 case DRX_CONSTELLATION_QAM32: 6501 fec_bits_desired = 5 * symbol_rate; 6502 break; 6503 case DRX_CONSTELLATION_QAM64: 6504 fec_bits_desired = 6 * symbol_rate; 6505 break; 6506 case DRX_CONSTELLATION_QAM128: 6507 fec_bits_desired = 7 * symbol_rate; 6508 break; 6509 case DRX_CONSTELLATION_QAM256: 6510 fec_bits_desired = 8 * symbol_rate; 6511 break; 6512 default: 6513 return -EINVAL; 6514 } 6515 6516 /* Parameters for Reed-Solomon Decoder */ 6517 /* fecrs_period = (int)ceil(FEC_BITS_DESIRED/(fecrs_prescale*plen)) */ 6518 /* rs_bit_cnt = fecrs_period*fecrs_prescale*plen */ 6519 /* result is within 32 bit arithmetic -> */ 6520 /* no need for mult or frac functions */ 6521 6522 /* TODO: use constant instead of calculation and remove the fec_rs_plen in ext_attr */ 6523 switch (ext_attr->standard) { 6524 case DRX_STANDARD_ITU_A: 6525 case DRX_STANDARD_ITU_C: 6526 fec_rs_plen = 204 * 8; 6527 break; 6528 case DRX_STANDARD_ITU_B: 6529 fec_rs_plen = 128 * 7; 6530 break; 6531 default: 6532 return -EINVAL; 6533 } 6534 6535 ext_attr->fec_rs_plen = fec_rs_plen; /* for getSigQual */ 6536 fec_rs_bit_cnt = fec_rs_prescale * fec_rs_plen; /* temp storage */ 6537 if (fec_rs_bit_cnt == 0) { 6538 pr_err("error: fec_rs_bit_cnt is zero!\n"); 6539 return -EIO; 6540 } 6541 fec_rs_period = fec_bits_desired / fec_rs_bit_cnt + 1; /* ceil */ 6542 if (ext_attr->standard != DRX_STANDARD_ITU_B) 6543 fec_oc_snc_fail_period = fec_rs_period; 6544 6545 /* limit to max 16 bit value (I2C register width) if needed */ 6546 if (fec_rs_period > 0xFFFF) 6547 fec_rs_period = 0xFFFF; 6548 6549 /* write corresponding registers */ 6550 switch (ext_attr->standard) { 6551 case DRX_STANDARD_ITU_A: 6552 case DRX_STANDARD_ITU_C: 6553 break; 6554 case DRX_STANDARD_ITU_B: 6555 switch (constellation) { 6556 case DRX_CONSTELLATION_QAM64: 6557 fec_rs_period = 31581; 6558 fec_oc_snc_fail_period = 17932; 6559 break; 6560 case DRX_CONSTELLATION_QAM256: 6561 fec_rs_period = 45446; 6562 fec_oc_snc_fail_period = 25805; 6563 break; 6564 default: 6565 return -EINVAL; 6566 } 6567 break; 6568 default: 6569 return -EINVAL; 6570 } 6571 6572 rc = drxj_dap_write_reg16(dev_addr, FEC_OC_SNC_FAIL_PERIOD__A, (u16)fec_oc_snc_fail_period, 0); 6573 if (rc != 0) { 6574 pr_err("error %d\n", rc); 6575 goto rw_error; 6576 } 6577 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PERIOD__A, (u16)fec_rs_period, 0); 6578 if (rc != 0) { 6579 pr_err("error %d\n", rc); 6580 goto rw_error; 6581 } 6582 rc = drxj_dap_write_reg16(dev_addr, FEC_RS_MEASUREMENT_PRESCALE__A, fec_rs_prescale, 0); 6583 if (rc != 0) { 6584 pr_err("error %d\n", rc); 6585 goto rw_error; 6586 } 6587 ext_attr->fec_rs_period = (u16) fec_rs_period; 6588 ext_attr->fec_rs_prescale = fec_rs_prescale; 6589 rc = drxdap_fasi_write_reg32(dev_addr, SCU_RAM_FEC_ACCUM_CW_CORRECTED_LO__A, 0, 0); 6590 if (rc != 0) { 6591 pr_err("error %d\n", rc); 6592 goto rw_error; 6593 } 6594 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_MEAS_COUNT__A, 0, 0); 6595 if (rc != 0) { 6596 pr_err("error %d\n", rc); 6597 goto rw_error; 6598 } 6599 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0, 0); 6600 if (rc != 0) { 6601 pr_err("error %d\n", rc); 6602 goto rw_error; 6603 } 6604 6605 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 6606 /* Parameters for Viterbi Decoder */ 6607 /* qamvd_period = (int)ceil(FEC_BITS_DESIRED/ */ 6608 /* (qamvd_prescale*plen*(qam_constellation+1))) */ 6609 /* vd_bit_cnt = qamvd_period*qamvd_prescale*plen */ 6610 /* result is within 32 bit arithmetic -> */ 6611 /* no need for mult or frac functions */ 6612 6613 /* a(8 bit) * b(8 bit) = 16 bit result => mult32 not needed */ 6614 fec_vd_plen = ext_attr->fec_vd_plen; 6615 qam_vd_prescale = ext_attr->qam_vd_prescale; 6616 qam_vd_bit_cnt = qam_vd_prescale * fec_vd_plen; /* temp storage */ 6617 6618 switch (constellation) { 6619 case DRX_CONSTELLATION_QAM64: 6620 /* a(16 bit) * b(4 bit) = 20 bit result => mult32 not needed */ 6621 qam_vd_period = 6622 qam_vd_bit_cnt * (QAM_TOP_CONSTELLATION_QAM64 + 1) 6623 * (QAM_TOP_CONSTELLATION_QAM64 + 1); 6624 break; 6625 case DRX_CONSTELLATION_QAM256: 6626 /* a(16 bit) * b(5 bit) = 21 bit result => mult32 not needed */ 6627 qam_vd_period = 6628 qam_vd_bit_cnt * (QAM_TOP_CONSTELLATION_QAM256 + 1) 6629 * (QAM_TOP_CONSTELLATION_QAM256 + 1); 6630 break; 6631 default: 6632 return -EINVAL; 6633 } 6634 if (qam_vd_period == 0) { 6635 pr_err("error: qam_vd_period is zero!\n"); 6636 return -EIO; 6637 } 6638 qam_vd_period = fec_bits_desired / qam_vd_period; 6639 /* limit to max 16 bit value (I2C register width) if needed */ 6640 if (qam_vd_period > 0xFFFF) 6641 qam_vd_period = 0xFFFF; 6642 6643 /* a(16 bit) * b(16 bit) = 32 bit result => mult32 not needed */ 6644 qam_vd_bit_cnt *= qam_vd_period; 6645 6646 rc = drxj_dap_write_reg16(dev_addr, QAM_VD_MEASUREMENT_PERIOD__A, (u16)qam_vd_period, 0); 6647 if (rc != 0) { 6648 pr_err("error %d\n", rc); 6649 goto rw_error; 6650 } 6651 rc = drxj_dap_write_reg16(dev_addr, QAM_VD_MEASUREMENT_PRESCALE__A, qam_vd_prescale, 0); 6652 if (rc != 0) { 6653 pr_err("error %d\n", rc); 6654 goto rw_error; 6655 } 6656 ext_attr->qam_vd_period = (u16) qam_vd_period; 6657 ext_attr->qam_vd_prescale = qam_vd_prescale; 6658 } 6659 6660 return 0; 6661 rw_error: 6662 return rc; 6663 } 6664 6665 /*============================================================================*/ 6666 6667 /* 6668 * \fn int set_qam16 () 6669 * \brief QAM16 specific setup 6670 * \param demod instance of demod. 6671 * \return int. 6672 */ 6673 static int set_qam16(struct drx_demod_instance *demod) 6674 { 6675 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 6676 int rc; 6677 static const u8 qam_dq_qual_fun[] = { 6678 DRXJ_16TO8(2), /* fun0 */ 6679 DRXJ_16TO8(2), /* fun1 */ 6680 DRXJ_16TO8(2), /* fun2 */ 6681 DRXJ_16TO8(2), /* fun3 */ 6682 DRXJ_16TO8(3), /* fun4 */ 6683 DRXJ_16TO8(3), /* fun5 */ 6684 }; 6685 static const u8 qam_eq_cma_rad[] = { 6686 DRXJ_16TO8(13517), /* RAD0 */ 6687 DRXJ_16TO8(13517), /* RAD1 */ 6688 DRXJ_16TO8(13517), /* RAD2 */ 6689 DRXJ_16TO8(13517), /* RAD3 */ 6690 DRXJ_16TO8(13517), /* RAD4 */ 6691 DRXJ_16TO8(13517), /* RAD5 */ 6692 }; 6693 6694 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 6695 if (rc != 0) { 6696 pr_err("error %d\n", rc); 6697 goto rw_error; 6698 } 6699 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 6700 if (rc != 0) { 6701 pr_err("error %d\n", rc); 6702 goto rw_error; 6703 } 6704 6705 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 140, 0); 6706 if (rc != 0) { 6707 pr_err("error %d\n", rc); 6708 goto rw_error; 6709 } 6710 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 50, 0); 6711 if (rc != 0) { 6712 pr_err("error %d\n", rc); 6713 goto rw_error; 6714 } 6715 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 120, 0); 6716 if (rc != 0) { 6717 pr_err("error %d\n", rc); 6718 goto rw_error; 6719 } 6720 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 230, 0); 6721 if (rc != 0) { 6722 pr_err("error %d\n", rc); 6723 goto rw_error; 6724 } 6725 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 95, 0); 6726 if (rc != 0) { 6727 pr_err("error %d\n", rc); 6728 goto rw_error; 6729 } 6730 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 105, 0); 6731 if (rc != 0) { 6732 pr_err("error %d\n", rc); 6733 goto rw_error; 6734 } 6735 6736 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 6737 if (rc != 0) { 6738 pr_err("error %d\n", rc); 6739 goto rw_error; 6740 } 6741 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 56, 0); 6742 if (rc != 0) { 6743 pr_err("error %d\n", rc); 6744 goto rw_error; 6745 } 6746 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 6747 if (rc != 0) { 6748 pr_err("error %d\n", rc); 6749 goto rw_error; 6750 } 6751 6752 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 16, 0); 6753 if (rc != 0) { 6754 pr_err("error %d\n", rc); 6755 goto rw_error; 6756 } 6757 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 220, 0); 6758 if (rc != 0) { 6759 pr_err("error %d\n", rc); 6760 goto rw_error; 6761 } 6762 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 25, 0); 6763 if (rc != 0) { 6764 pr_err("error %d\n", rc); 6765 goto rw_error; 6766 } 6767 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 6, 0); 6768 if (rc != 0) { 6769 pr_err("error %d\n", rc); 6770 goto rw_error; 6771 } 6772 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-24), 0); 6773 if (rc != 0) { 6774 pr_err("error %d\n", rc); 6775 goto rw_error; 6776 } 6777 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16)(-65), 0); 6778 if (rc != 0) { 6779 pr_err("error %d\n", rc); 6780 goto rw_error; 6781 } 6782 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-127), 0); 6783 if (rc != 0) { 6784 pr_err("error %d\n", rc); 6785 goto rw_error; 6786 } 6787 6788 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 6789 if (rc != 0) { 6790 pr_err("error %d\n", rc); 6791 goto rw_error; 6792 } 6793 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 6794 if (rc != 0) { 6795 pr_err("error %d\n", rc); 6796 goto rw_error; 6797 } 6798 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 6799 if (rc != 0) { 6800 pr_err("error %d\n", rc); 6801 goto rw_error; 6802 } 6803 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20, 0); 6804 if (rc != 0) { 6805 pr_err("error %d\n", rc); 6806 goto rw_error; 6807 } 6808 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 6809 if (rc != 0) { 6810 pr_err("error %d\n", rc); 6811 goto rw_error; 6812 } 6813 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 6814 if (rc != 0) { 6815 pr_err("error %d\n", rc); 6816 goto rw_error; 6817 } 6818 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 10, 0); 6819 if (rc != 0) { 6820 pr_err("error %d\n", rc); 6821 goto rw_error; 6822 } 6823 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 50, 0); 6824 if (rc != 0) { 6825 pr_err("error %d\n", rc); 6826 goto rw_error; 6827 } 6828 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 6829 if (rc != 0) { 6830 pr_err("error %d\n", rc); 6831 goto rw_error; 6832 } 6833 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 6834 if (rc != 0) { 6835 pr_err("error %d\n", rc); 6836 goto rw_error; 6837 } 6838 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 6839 if (rc != 0) { 6840 pr_err("error %d\n", rc); 6841 goto rw_error; 6842 } 6843 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 6844 if (rc != 0) { 6845 pr_err("error %d\n", rc); 6846 goto rw_error; 6847 } 6848 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 6849 if (rc != 0) { 6850 pr_err("error %d\n", rc); 6851 goto rw_error; 6852 } 6853 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 6854 if (rc != 0) { 6855 pr_err("error %d\n", rc); 6856 goto rw_error; 6857 } 6858 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 6859 if (rc != 0) { 6860 pr_err("error %d\n", rc); 6861 goto rw_error; 6862 } 6863 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 32, 0); 6864 if (rc != 0) { 6865 pr_err("error %d\n", rc); 6866 goto rw_error; 6867 } 6868 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 240, 0); 6869 if (rc != 0) { 6870 pr_err("error %d\n", rc); 6871 goto rw_error; 6872 } 6873 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 6874 if (rc != 0) { 6875 pr_err("error %d\n", rc); 6876 goto rw_error; 6877 } 6878 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 6879 if (rc != 0) { 6880 pr_err("error %d\n", rc); 6881 goto rw_error; 6882 } 6883 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 32, 0); 6884 if (rc != 0) { 6885 pr_err("error %d\n", rc); 6886 goto rw_error; 6887 } 6888 6889 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 40960, 0); 6890 if (rc != 0) { 6891 pr_err("error %d\n", rc); 6892 goto rw_error; 6893 } 6894 6895 return 0; 6896 rw_error: 6897 return rc; 6898 } 6899 6900 /*============================================================================*/ 6901 6902 /* 6903 * \fn int set_qam32 () 6904 * \brief QAM32 specific setup 6905 * \param demod instance of demod. 6906 * \return int. 6907 */ 6908 static int set_qam32(struct drx_demod_instance *demod) 6909 { 6910 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 6911 int rc; 6912 static const u8 qam_dq_qual_fun[] = { 6913 DRXJ_16TO8(3), /* fun0 */ 6914 DRXJ_16TO8(3), /* fun1 */ 6915 DRXJ_16TO8(3), /* fun2 */ 6916 DRXJ_16TO8(3), /* fun3 */ 6917 DRXJ_16TO8(4), /* fun4 */ 6918 DRXJ_16TO8(4), /* fun5 */ 6919 }; 6920 static const u8 qam_eq_cma_rad[] = { 6921 DRXJ_16TO8(6707), /* RAD0 */ 6922 DRXJ_16TO8(6707), /* RAD1 */ 6923 DRXJ_16TO8(6707), /* RAD2 */ 6924 DRXJ_16TO8(6707), /* RAD3 */ 6925 DRXJ_16TO8(6707), /* RAD4 */ 6926 DRXJ_16TO8(6707), /* RAD5 */ 6927 }; 6928 6929 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 6930 if (rc != 0) { 6931 pr_err("error %d\n", rc); 6932 goto rw_error; 6933 } 6934 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 6935 if (rc != 0) { 6936 pr_err("error %d\n", rc); 6937 goto rw_error; 6938 } 6939 6940 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 90, 0); 6941 if (rc != 0) { 6942 pr_err("error %d\n", rc); 6943 goto rw_error; 6944 } 6945 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 50, 0); 6946 if (rc != 0) { 6947 pr_err("error %d\n", rc); 6948 goto rw_error; 6949 } 6950 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 6951 if (rc != 0) { 6952 pr_err("error %d\n", rc); 6953 goto rw_error; 6954 } 6955 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 170, 0); 6956 if (rc != 0) { 6957 pr_err("error %d\n", rc); 6958 goto rw_error; 6959 } 6960 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 6961 if (rc != 0) { 6962 pr_err("error %d\n", rc); 6963 goto rw_error; 6964 } 6965 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 100, 0); 6966 if (rc != 0) { 6967 pr_err("error %d\n", rc); 6968 goto rw_error; 6969 } 6970 6971 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 6972 if (rc != 0) { 6973 pr_err("error %d\n", rc); 6974 goto rw_error; 6975 } 6976 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 56, 0); 6977 if (rc != 0) { 6978 pr_err("error %d\n", rc); 6979 goto rw_error; 6980 } 6981 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 6982 if (rc != 0) { 6983 pr_err("error %d\n", rc); 6984 goto rw_error; 6985 } 6986 6987 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 12, 0); 6988 if (rc != 0) { 6989 pr_err("error %d\n", rc); 6990 goto rw_error; 6991 } 6992 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 140, 0); 6993 if (rc != 0) { 6994 pr_err("error %d\n", rc); 6995 goto rw_error; 6996 } 6997 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16)(-8), 0); 6998 if (rc != 0) { 6999 pr_err("error %d\n", rc); 7000 goto rw_error; 7001 } 7002 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16)(-16), 0); 7003 if (rc != 0) { 7004 pr_err("error %d\n", rc); 7005 goto rw_error; 7006 } 7007 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-26), 0); 7008 if (rc != 0) { 7009 pr_err("error %d\n", rc); 7010 goto rw_error; 7011 } 7012 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16)(-56), 0); 7013 if (rc != 0) { 7014 pr_err("error %d\n", rc); 7015 goto rw_error; 7016 } 7017 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-86), 0); 7018 if (rc != 0) { 7019 pr_err("error %d\n", rc); 7020 goto rw_error; 7021 } 7022 7023 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7024 if (rc != 0) { 7025 pr_err("error %d\n", rc); 7026 goto rw_error; 7027 } 7028 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7029 if (rc != 0) { 7030 pr_err("error %d\n", rc); 7031 goto rw_error; 7032 } 7033 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7034 if (rc != 0) { 7035 pr_err("error %d\n", rc); 7036 goto rw_error; 7037 } 7038 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20, 0); 7039 if (rc != 0) { 7040 pr_err("error %d\n", rc); 7041 goto rw_error; 7042 } 7043 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7044 if (rc != 0) { 7045 pr_err("error %d\n", rc); 7046 goto rw_error; 7047 } 7048 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7049 if (rc != 0) { 7050 pr_err("error %d\n", rc); 7051 goto rw_error; 7052 } 7053 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 10, 0); 7054 if (rc != 0) { 7055 pr_err("error %d\n", rc); 7056 goto rw_error; 7057 } 7058 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 50, 0); 7059 if (rc != 0) { 7060 pr_err("error %d\n", rc); 7061 goto rw_error; 7062 } 7063 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7064 if (rc != 0) { 7065 pr_err("error %d\n", rc); 7066 goto rw_error; 7067 } 7068 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7069 if (rc != 0) { 7070 pr_err("error %d\n", rc); 7071 goto rw_error; 7072 } 7073 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7074 if (rc != 0) { 7075 pr_err("error %d\n", rc); 7076 goto rw_error; 7077 } 7078 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7079 if (rc != 0) { 7080 pr_err("error %d\n", rc); 7081 goto rw_error; 7082 } 7083 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7084 if (rc != 0) { 7085 pr_err("error %d\n", rc); 7086 goto rw_error; 7087 } 7088 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7089 if (rc != 0) { 7090 pr_err("error %d\n", rc); 7091 goto rw_error; 7092 } 7093 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7094 if (rc != 0) { 7095 pr_err("error %d\n", rc); 7096 goto rw_error; 7097 } 7098 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 32, 0); 7099 if (rc != 0) { 7100 pr_err("error %d\n", rc); 7101 goto rw_error; 7102 } 7103 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 176, 0); 7104 if (rc != 0) { 7105 pr_err("error %d\n", rc); 7106 goto rw_error; 7107 } 7108 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7109 if (rc != 0) { 7110 pr_err("error %d\n", rc); 7111 goto rw_error; 7112 } 7113 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7114 if (rc != 0) { 7115 pr_err("error %d\n", rc); 7116 goto rw_error; 7117 } 7118 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 8, 0); 7119 if (rc != 0) { 7120 pr_err("error %d\n", rc); 7121 goto rw_error; 7122 } 7123 7124 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 20480, 0); 7125 if (rc != 0) { 7126 pr_err("error %d\n", rc); 7127 goto rw_error; 7128 } 7129 7130 return 0; 7131 rw_error: 7132 return rc; 7133 } 7134 7135 /*============================================================================*/ 7136 7137 /* 7138 * \fn int set_qam64 () 7139 * \brief QAM64 specific setup 7140 * \param demod instance of demod. 7141 * \return int. 7142 */ 7143 static int set_qam64(struct drx_demod_instance *demod) 7144 { 7145 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 7146 int rc; 7147 static const u8 qam_dq_qual_fun[] = { 7148 /* this is hw reset value. no necessary to re-write */ 7149 DRXJ_16TO8(4), /* fun0 */ 7150 DRXJ_16TO8(4), /* fun1 */ 7151 DRXJ_16TO8(4), /* fun2 */ 7152 DRXJ_16TO8(4), /* fun3 */ 7153 DRXJ_16TO8(6), /* fun4 */ 7154 DRXJ_16TO8(6), /* fun5 */ 7155 }; 7156 static const u8 qam_eq_cma_rad[] = { 7157 DRXJ_16TO8(13336), /* RAD0 */ 7158 DRXJ_16TO8(12618), /* RAD1 */ 7159 DRXJ_16TO8(11988), /* RAD2 */ 7160 DRXJ_16TO8(13809), /* RAD3 */ 7161 DRXJ_16TO8(13809), /* RAD4 */ 7162 DRXJ_16TO8(15609), /* RAD5 */ 7163 }; 7164 7165 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 7166 if (rc != 0) { 7167 pr_err("error %d\n", rc); 7168 goto rw_error; 7169 } 7170 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 7171 if (rc != 0) { 7172 pr_err("error %d\n", rc); 7173 goto rw_error; 7174 } 7175 7176 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 105, 0); 7177 if (rc != 0) { 7178 pr_err("error %d\n", rc); 7179 goto rw_error; 7180 } 7181 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 60, 0); 7182 if (rc != 0) { 7183 pr_err("error %d\n", rc); 7184 goto rw_error; 7185 } 7186 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 7187 if (rc != 0) { 7188 pr_err("error %d\n", rc); 7189 goto rw_error; 7190 } 7191 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 195, 0); 7192 if (rc != 0) { 7193 pr_err("error %d\n", rc); 7194 goto rw_error; 7195 } 7196 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 7197 if (rc != 0) { 7198 pr_err("error %d\n", rc); 7199 goto rw_error; 7200 } 7201 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 84, 0); 7202 if (rc != 0) { 7203 pr_err("error %d\n", rc); 7204 goto rw_error; 7205 } 7206 7207 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 7208 if (rc != 0) { 7209 pr_err("error %d\n", rc); 7210 goto rw_error; 7211 } 7212 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 32, 0); 7213 if (rc != 0) { 7214 pr_err("error %d\n", rc); 7215 goto rw_error; 7216 } 7217 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 7218 if (rc != 0) { 7219 pr_err("error %d\n", rc); 7220 goto rw_error; 7221 } 7222 7223 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 12, 0); 7224 if (rc != 0) { 7225 pr_err("error %d\n", rc); 7226 goto rw_error; 7227 } 7228 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 141, 0); 7229 if (rc != 0) { 7230 pr_err("error %d\n", rc); 7231 goto rw_error; 7232 } 7233 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 7, 0); 7234 if (rc != 0) { 7235 pr_err("error %d\n", rc); 7236 goto rw_error; 7237 } 7238 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 0, 0); 7239 if (rc != 0) { 7240 pr_err("error %d\n", rc); 7241 goto rw_error; 7242 } 7243 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-15), 0); 7244 if (rc != 0) { 7245 pr_err("error %d\n", rc); 7246 goto rw_error; 7247 } 7248 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16)(-45), 0); 7249 if (rc != 0) { 7250 pr_err("error %d\n", rc); 7251 goto rw_error; 7252 } 7253 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-80), 0); 7254 if (rc != 0) { 7255 pr_err("error %d\n", rc); 7256 goto rw_error; 7257 } 7258 7259 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7260 if (rc != 0) { 7261 pr_err("error %d\n", rc); 7262 goto rw_error; 7263 } 7264 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7265 if (rc != 0) { 7266 pr_err("error %d\n", rc); 7267 goto rw_error; 7268 } 7269 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7270 if (rc != 0) { 7271 pr_err("error %d\n", rc); 7272 goto rw_error; 7273 } 7274 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30, 0); 7275 if (rc != 0) { 7276 pr_err("error %d\n", rc); 7277 goto rw_error; 7278 } 7279 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7280 if (rc != 0) { 7281 pr_err("error %d\n", rc); 7282 goto rw_error; 7283 } 7284 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7285 if (rc != 0) { 7286 pr_err("error %d\n", rc); 7287 goto rw_error; 7288 } 7289 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 15, 0); 7290 if (rc != 0) { 7291 pr_err("error %d\n", rc); 7292 goto rw_error; 7293 } 7294 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 80, 0); 7295 if (rc != 0) { 7296 pr_err("error %d\n", rc); 7297 goto rw_error; 7298 } 7299 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7300 if (rc != 0) { 7301 pr_err("error %d\n", rc); 7302 goto rw_error; 7303 } 7304 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7305 if (rc != 0) { 7306 pr_err("error %d\n", rc); 7307 goto rw_error; 7308 } 7309 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7310 if (rc != 0) { 7311 pr_err("error %d\n", rc); 7312 goto rw_error; 7313 } 7314 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7315 if (rc != 0) { 7316 pr_err("error %d\n", rc); 7317 goto rw_error; 7318 } 7319 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7320 if (rc != 0) { 7321 pr_err("error %d\n", rc); 7322 goto rw_error; 7323 } 7324 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7325 if (rc != 0) { 7326 pr_err("error %d\n", rc); 7327 goto rw_error; 7328 } 7329 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7330 if (rc != 0) { 7331 pr_err("error %d\n", rc); 7332 goto rw_error; 7333 } 7334 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 48, 0); 7335 if (rc != 0) { 7336 pr_err("error %d\n", rc); 7337 goto rw_error; 7338 } 7339 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 160, 0); 7340 if (rc != 0) { 7341 pr_err("error %d\n", rc); 7342 goto rw_error; 7343 } 7344 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7345 if (rc != 0) { 7346 pr_err("error %d\n", rc); 7347 goto rw_error; 7348 } 7349 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7350 if (rc != 0) { 7351 pr_err("error %d\n", rc); 7352 goto rw_error; 7353 } 7354 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 32, 0); 7355 if (rc != 0) { 7356 pr_err("error %d\n", rc); 7357 goto rw_error; 7358 } 7359 7360 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 43008, 0); 7361 if (rc != 0) { 7362 pr_err("error %d\n", rc); 7363 goto rw_error; 7364 } 7365 7366 return 0; 7367 rw_error: 7368 return rc; 7369 } 7370 7371 /*============================================================================*/ 7372 7373 /* 7374 * \fn int set_qam128 () 7375 * \brief QAM128 specific setup 7376 * \param demod: instance of demod. 7377 * \return int. 7378 */ 7379 static int set_qam128(struct drx_demod_instance *demod) 7380 { 7381 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 7382 int rc; 7383 static const u8 qam_dq_qual_fun[] = { 7384 DRXJ_16TO8(6), /* fun0 */ 7385 DRXJ_16TO8(6), /* fun1 */ 7386 DRXJ_16TO8(6), /* fun2 */ 7387 DRXJ_16TO8(6), /* fun3 */ 7388 DRXJ_16TO8(9), /* fun4 */ 7389 DRXJ_16TO8(9), /* fun5 */ 7390 }; 7391 static const u8 qam_eq_cma_rad[] = { 7392 DRXJ_16TO8(6164), /* RAD0 */ 7393 DRXJ_16TO8(6598), /* RAD1 */ 7394 DRXJ_16TO8(6394), /* RAD2 */ 7395 DRXJ_16TO8(6409), /* RAD3 */ 7396 DRXJ_16TO8(6656), /* RAD4 */ 7397 DRXJ_16TO8(7238), /* RAD5 */ 7398 }; 7399 7400 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 7401 if (rc != 0) { 7402 pr_err("error %d\n", rc); 7403 goto rw_error; 7404 } 7405 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 7406 if (rc != 0) { 7407 pr_err("error %d\n", rc); 7408 goto rw_error; 7409 } 7410 7411 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 50, 0); 7412 if (rc != 0) { 7413 pr_err("error %d\n", rc); 7414 goto rw_error; 7415 } 7416 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 60, 0); 7417 if (rc != 0) { 7418 pr_err("error %d\n", rc); 7419 goto rw_error; 7420 } 7421 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 7422 if (rc != 0) { 7423 pr_err("error %d\n", rc); 7424 goto rw_error; 7425 } 7426 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 140, 0); 7427 if (rc != 0) { 7428 pr_err("error %d\n", rc); 7429 goto rw_error; 7430 } 7431 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 7432 if (rc != 0) { 7433 pr_err("error %d\n", rc); 7434 goto rw_error; 7435 } 7436 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 100, 0); 7437 if (rc != 0) { 7438 pr_err("error %d\n", rc); 7439 goto rw_error; 7440 } 7441 7442 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 7443 if (rc != 0) { 7444 pr_err("error %d\n", rc); 7445 goto rw_error; 7446 } 7447 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 32, 0); 7448 if (rc != 0) { 7449 pr_err("error %d\n", rc); 7450 goto rw_error; 7451 } 7452 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 7453 if (rc != 0) { 7454 pr_err("error %d\n", rc); 7455 goto rw_error; 7456 } 7457 7458 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 8, 0); 7459 if (rc != 0) { 7460 pr_err("error %d\n", rc); 7461 goto rw_error; 7462 } 7463 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 65, 0); 7464 if (rc != 0) { 7465 pr_err("error %d\n", rc); 7466 goto rw_error; 7467 } 7468 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 5, 0); 7469 if (rc != 0) { 7470 pr_err("error %d\n", rc); 7471 goto rw_error; 7472 } 7473 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 3, 0); 7474 if (rc != 0) { 7475 pr_err("error %d\n", rc); 7476 goto rw_error; 7477 } 7478 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16)(-1), 0); 7479 if (rc != 0) { 7480 pr_err("error %d\n", rc); 7481 goto rw_error; 7482 } 7483 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, 12, 0); 7484 if (rc != 0) { 7485 pr_err("error %d\n", rc); 7486 goto rw_error; 7487 } 7488 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-23), 0); 7489 if (rc != 0) { 7490 pr_err("error %d\n", rc); 7491 goto rw_error; 7492 } 7493 7494 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7495 if (rc != 0) { 7496 pr_err("error %d\n", rc); 7497 goto rw_error; 7498 } 7499 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7500 if (rc != 0) { 7501 pr_err("error %d\n", rc); 7502 goto rw_error; 7503 } 7504 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7505 if (rc != 0) { 7506 pr_err("error %d\n", rc); 7507 goto rw_error; 7508 } 7509 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40, 0); 7510 if (rc != 0) { 7511 pr_err("error %d\n", rc); 7512 goto rw_error; 7513 } 7514 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7515 if (rc != 0) { 7516 pr_err("error %d\n", rc); 7517 goto rw_error; 7518 } 7519 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7520 if (rc != 0) { 7521 pr_err("error %d\n", rc); 7522 goto rw_error; 7523 } 7524 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20, 0); 7525 if (rc != 0) { 7526 pr_err("error %d\n", rc); 7527 goto rw_error; 7528 } 7529 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 80, 0); 7530 if (rc != 0) { 7531 pr_err("error %d\n", rc); 7532 goto rw_error; 7533 } 7534 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7535 if (rc != 0) { 7536 pr_err("error %d\n", rc); 7537 goto rw_error; 7538 } 7539 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7540 if (rc != 0) { 7541 pr_err("error %d\n", rc); 7542 goto rw_error; 7543 } 7544 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7545 if (rc != 0) { 7546 pr_err("error %d\n", rc); 7547 goto rw_error; 7548 } 7549 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7550 if (rc != 0) { 7551 pr_err("error %d\n", rc); 7552 goto rw_error; 7553 } 7554 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7555 if (rc != 0) { 7556 pr_err("error %d\n", rc); 7557 goto rw_error; 7558 } 7559 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7560 if (rc != 0) { 7561 pr_err("error %d\n", rc); 7562 goto rw_error; 7563 } 7564 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7565 if (rc != 0) { 7566 pr_err("error %d\n", rc); 7567 goto rw_error; 7568 } 7569 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 32, 0); 7570 if (rc != 0) { 7571 pr_err("error %d\n", rc); 7572 goto rw_error; 7573 } 7574 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 144, 0); 7575 if (rc != 0) { 7576 pr_err("error %d\n", rc); 7577 goto rw_error; 7578 } 7579 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7580 if (rc != 0) { 7581 pr_err("error %d\n", rc); 7582 goto rw_error; 7583 } 7584 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7585 if (rc != 0) { 7586 pr_err("error %d\n", rc); 7587 goto rw_error; 7588 } 7589 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 16, 0); 7590 if (rc != 0) { 7591 pr_err("error %d\n", rc); 7592 goto rw_error; 7593 } 7594 7595 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 20992, 0); 7596 if (rc != 0) { 7597 pr_err("error %d\n", rc); 7598 goto rw_error; 7599 } 7600 7601 return 0; 7602 rw_error: 7603 return rc; 7604 } 7605 7606 /*============================================================================*/ 7607 7608 /* 7609 * \fn int set_qam256 () 7610 * \brief QAM256 specific setup 7611 * \param demod: instance of demod. 7612 * \return int. 7613 */ 7614 static int set_qam256(struct drx_demod_instance *demod) 7615 { 7616 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 7617 int rc; 7618 static const u8 qam_dq_qual_fun[] = { 7619 DRXJ_16TO8(8), /* fun0 */ 7620 DRXJ_16TO8(8), /* fun1 */ 7621 DRXJ_16TO8(8), /* fun2 */ 7622 DRXJ_16TO8(8), /* fun3 */ 7623 DRXJ_16TO8(12), /* fun4 */ 7624 DRXJ_16TO8(12), /* fun5 */ 7625 }; 7626 static const u8 qam_eq_cma_rad[] = { 7627 DRXJ_16TO8(12345), /* RAD0 */ 7628 DRXJ_16TO8(12345), /* RAD1 */ 7629 DRXJ_16TO8(13626), /* RAD2 */ 7630 DRXJ_16TO8(12931), /* RAD3 */ 7631 DRXJ_16TO8(14719), /* RAD4 */ 7632 DRXJ_16TO8(15356), /* RAD5 */ 7633 }; 7634 7635 rc = drxdap_fasi_write_block(dev_addr, QAM_DQ_QUAL_FUN0__A, sizeof(qam_dq_qual_fun), ((u8 *)qam_dq_qual_fun), 0); 7636 if (rc != 0) { 7637 pr_err("error %d\n", rc); 7638 goto rw_error; 7639 } 7640 rc = drxdap_fasi_write_block(dev_addr, SCU_RAM_QAM_EQ_CMA_RAD0__A, sizeof(qam_eq_cma_rad), ((u8 *)qam_eq_cma_rad), 0); 7641 if (rc != 0) { 7642 pr_err("error %d\n", rc); 7643 goto rw_error; 7644 } 7645 7646 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RTH__A, 50, 0); 7647 if (rc != 0) { 7648 pr_err("error %d\n", rc); 7649 goto rw_error; 7650 } 7651 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FTH__A, 60, 0); 7652 if (rc != 0) { 7653 pr_err("error %d\n", rc); 7654 goto rw_error; 7655 } 7656 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_PTH__A, 100, 0); 7657 if (rc != 0) { 7658 pr_err("error %d\n", rc); 7659 goto rw_error; 7660 } 7661 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_QTH__A, 150, 0); 7662 if (rc != 0) { 7663 pr_err("error %d\n", rc); 7664 goto rw_error; 7665 } 7666 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_CTH__A, 80, 0); 7667 if (rc != 0) { 7668 pr_err("error %d\n", rc); 7669 goto rw_error; 7670 } 7671 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MTH__A, 110, 0); 7672 if (rc != 0) { 7673 pr_err("error %d\n", rc); 7674 goto rw_error; 7675 } 7676 7677 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RATE_LIM__A, 40, 0); 7678 if (rc != 0) { 7679 pr_err("error %d\n", rc); 7680 goto rw_error; 7681 } 7682 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_FREQ_LIM__A, 16, 0); 7683 if (rc != 0) { 7684 pr_err("error %d\n", rc); 7685 goto rw_error; 7686 } 7687 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_COUNT_LIM__A, 3, 0); 7688 if (rc != 0) { 7689 pr_err("error %d\n", rc); 7690 goto rw_error; 7691 } 7692 7693 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, 8, 0); 7694 if (rc != 0) { 7695 pr_err("error %d\n", rc); 7696 goto rw_error; 7697 } 7698 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, 74, 0); 7699 if (rc != 0) { 7700 pr_err("error %d\n", rc); 7701 goto rw_error; 7702 } 7703 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, 18, 0); 7704 if (rc != 0) { 7705 pr_err("error %d\n", rc); 7706 goto rw_error; 7707 } 7708 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, 13, 0); 7709 if (rc != 0) { 7710 pr_err("error %d\n", rc); 7711 goto rw_error; 7712 } 7713 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, 7, 0); 7714 if (rc != 0) { 7715 pr_err("error %d\n", rc); 7716 goto rw_error; 7717 } 7718 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, 0, 0); 7719 if (rc != 0) { 7720 pr_err("error %d\n", rc); 7721 goto rw_error; 7722 } 7723 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16)(-8), 0); 7724 if (rc != 0) { 7725 pr_err("error %d\n", rc); 7726 goto rw_error; 7727 } 7728 7729 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_FINE__A, 15, 0); 7730 if (rc != 0) { 7731 pr_err("error %d\n", rc); 7732 goto rw_error; 7733 } 7734 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CA_COARSE__A, 40, 0); 7735 if (rc != 0) { 7736 pr_err("error %d\n", rc); 7737 goto rw_error; 7738 } 7739 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_FINE__A, 2, 0); 7740 if (rc != 0) { 7741 pr_err("error %d\n", rc); 7742 goto rw_error; 7743 } 7744 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50, 0); 7745 if (rc != 0) { 7746 pr_err("error %d\n", rc); 7747 goto rw_error; 7748 } 7749 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CP_COARSE__A, 255, 0); 7750 if (rc != 0) { 7751 pr_err("error %d\n", rc); 7752 goto rw_error; 7753 } 7754 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_FINE__A, 2, 0); 7755 if (rc != 0) { 7756 pr_err("error %d\n", rc); 7757 goto rw_error; 7758 } 7759 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_MEDIUM__A, 25, 0); 7760 if (rc != 0) { 7761 pr_err("error %d\n", rc); 7762 goto rw_error; 7763 } 7764 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CI_COARSE__A, 80, 0); 7765 if (rc != 0) { 7766 pr_err("error %d\n", rc); 7767 goto rw_error; 7768 } 7769 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_FINE__A, 12, 0); 7770 if (rc != 0) { 7771 pr_err("error %d\n", rc); 7772 goto rw_error; 7773 } 7774 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24, 0); 7775 if (rc != 0) { 7776 pr_err("error %d\n", rc); 7777 goto rw_error; 7778 } 7779 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EP_COARSE__A, 24, 0); 7780 if (rc != 0) { 7781 pr_err("error %d\n", rc); 7782 goto rw_error; 7783 } 7784 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_FINE__A, 12, 0); 7785 if (rc != 0) { 7786 pr_err("error %d\n", rc); 7787 goto rw_error; 7788 } 7789 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16, 0); 7790 if (rc != 0) { 7791 pr_err("error %d\n", rc); 7792 goto rw_error; 7793 } 7794 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_EI_COARSE__A, 16, 0); 7795 if (rc != 0) { 7796 pr_err("error %d\n", rc); 7797 goto rw_error; 7798 } 7799 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_FINE__A, 16, 0); 7800 if (rc != 0) { 7801 pr_err("error %d\n", rc); 7802 goto rw_error; 7803 } 7804 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_MEDIUM__A, 48, 0); 7805 if (rc != 0) { 7806 pr_err("error %d\n", rc); 7807 goto rw_error; 7808 } 7809 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF_COARSE__A, 80, 0); 7810 if (rc != 0) { 7811 pr_err("error %d\n", rc); 7812 goto rw_error; 7813 } 7814 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_FINE__A, 5, 0); 7815 if (rc != 0) { 7816 pr_err("error %d\n", rc); 7817 goto rw_error; 7818 } 7819 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 15, 0); 7820 if (rc != 0) { 7821 pr_err("error %d\n", rc); 7822 goto rw_error; 7823 } 7824 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_LC_CF1_COARSE__A, 16, 0); 7825 if (rc != 0) { 7826 pr_err("error %d\n", rc); 7827 goto rw_error; 7828 } 7829 7830 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_SL_SIG_POWER__A, 43520, 0); 7831 if (rc != 0) { 7832 pr_err("error %d\n", rc); 7833 goto rw_error; 7834 } 7835 7836 return 0; 7837 rw_error: 7838 return rc; 7839 } 7840 7841 /*============================================================================*/ 7842 #define QAM_SET_OP_ALL 0x1 7843 #define QAM_SET_OP_CONSTELLATION 0x2 7844 #define QAM_SET_OP_SPECTRUM 0X4 7845 7846 /* 7847 * \fn int set_qam () 7848 * \brief Set QAM demod. 7849 * \param demod: instance of demod. 7850 * \param channel: pointer to channel data. 7851 * \return int. 7852 */ 7853 static int 7854 set_qam(struct drx_demod_instance *demod, 7855 struct drx_channel *channel, s32 tuner_freq_offset, u32 op) 7856 { 7857 struct i2c_device_addr *dev_addr = NULL; 7858 struct drxj_data *ext_attr = NULL; 7859 struct drx_common_attr *common_attr = NULL; 7860 int rc; 7861 u32 adc_frequency = 0; 7862 u32 iqm_rc_rate = 0; 7863 u16 cmd_result = 0; 7864 u16 lc_symbol_freq = 0; 7865 u16 iqm_rc_stretch = 0; 7866 u16 set_env_parameters = 0; 7867 u16 set_param_parameters[2] = { 0 }; 7868 struct drxjscu_cmd cmd_scu = { /* command */ 0, 7869 /* parameter_len */ 0, 7870 /* result_len */ 0, 7871 /* parameter */ NULL, 7872 /* result */ NULL 7873 }; 7874 static const u8 qam_a_taps[] = { 7875 DRXJ_16TO8(-1), /* re0 */ 7876 DRXJ_16TO8(1), /* re1 */ 7877 DRXJ_16TO8(1), /* re2 */ 7878 DRXJ_16TO8(-1), /* re3 */ 7879 DRXJ_16TO8(-1), /* re4 */ 7880 DRXJ_16TO8(2), /* re5 */ 7881 DRXJ_16TO8(1), /* re6 */ 7882 DRXJ_16TO8(-2), /* re7 */ 7883 DRXJ_16TO8(0), /* re8 */ 7884 DRXJ_16TO8(3), /* re9 */ 7885 DRXJ_16TO8(-1), /* re10 */ 7886 DRXJ_16TO8(-3), /* re11 */ 7887 DRXJ_16TO8(4), /* re12 */ 7888 DRXJ_16TO8(1), /* re13 */ 7889 DRXJ_16TO8(-8), /* re14 */ 7890 DRXJ_16TO8(4), /* re15 */ 7891 DRXJ_16TO8(13), /* re16 */ 7892 DRXJ_16TO8(-13), /* re17 */ 7893 DRXJ_16TO8(-19), /* re18 */ 7894 DRXJ_16TO8(28), /* re19 */ 7895 DRXJ_16TO8(25), /* re20 */ 7896 DRXJ_16TO8(-53), /* re21 */ 7897 DRXJ_16TO8(-31), /* re22 */ 7898 DRXJ_16TO8(96), /* re23 */ 7899 DRXJ_16TO8(37), /* re24 */ 7900 DRXJ_16TO8(-190), /* re25 */ 7901 DRXJ_16TO8(-40), /* re26 */ 7902 DRXJ_16TO8(619) /* re27 */ 7903 }; 7904 static const u8 qam_b64_taps[] = { 7905 DRXJ_16TO8(0), /* re0 */ 7906 DRXJ_16TO8(-2), /* re1 */ 7907 DRXJ_16TO8(1), /* re2 */ 7908 DRXJ_16TO8(2), /* re3 */ 7909 DRXJ_16TO8(-2), /* re4 */ 7910 DRXJ_16TO8(0), /* re5 */ 7911 DRXJ_16TO8(4), /* re6 */ 7912 DRXJ_16TO8(-2), /* re7 */ 7913 DRXJ_16TO8(-4), /* re8 */ 7914 DRXJ_16TO8(4), /* re9 */ 7915 DRXJ_16TO8(3), /* re10 */ 7916 DRXJ_16TO8(-6), /* re11 */ 7917 DRXJ_16TO8(0), /* re12 */ 7918 DRXJ_16TO8(6), /* re13 */ 7919 DRXJ_16TO8(-5), /* re14 */ 7920 DRXJ_16TO8(-3), /* re15 */ 7921 DRXJ_16TO8(11), /* re16 */ 7922 DRXJ_16TO8(-4), /* re17 */ 7923 DRXJ_16TO8(-19), /* re18 */ 7924 DRXJ_16TO8(19), /* re19 */ 7925 DRXJ_16TO8(28), /* re20 */ 7926 DRXJ_16TO8(-45), /* re21 */ 7927 DRXJ_16TO8(-36), /* re22 */ 7928 DRXJ_16TO8(90), /* re23 */ 7929 DRXJ_16TO8(42), /* re24 */ 7930 DRXJ_16TO8(-185), /* re25 */ 7931 DRXJ_16TO8(-46), /* re26 */ 7932 DRXJ_16TO8(614) /* re27 */ 7933 }; 7934 static const u8 qam_b256_taps[] = { 7935 DRXJ_16TO8(-2), /* re0 */ 7936 DRXJ_16TO8(4), /* re1 */ 7937 DRXJ_16TO8(1), /* re2 */ 7938 DRXJ_16TO8(-4), /* re3 */ 7939 DRXJ_16TO8(0), /* re4 */ 7940 DRXJ_16TO8(4), /* re5 */ 7941 DRXJ_16TO8(-2), /* re6 */ 7942 DRXJ_16TO8(-4), /* re7 */ 7943 DRXJ_16TO8(5), /* re8 */ 7944 DRXJ_16TO8(2), /* re9 */ 7945 DRXJ_16TO8(-8), /* re10 */ 7946 DRXJ_16TO8(2), /* re11 */ 7947 DRXJ_16TO8(11), /* re12 */ 7948 DRXJ_16TO8(-8), /* re13 */ 7949 DRXJ_16TO8(-15), /* re14 */ 7950 DRXJ_16TO8(16), /* re15 */ 7951 DRXJ_16TO8(19), /* re16 */ 7952 DRXJ_16TO8(-27), /* re17 */ 7953 DRXJ_16TO8(-22), /* re18 */ 7954 DRXJ_16TO8(44), /* re19 */ 7955 DRXJ_16TO8(26), /* re20 */ 7956 DRXJ_16TO8(-69), /* re21 */ 7957 DRXJ_16TO8(-28), /* re22 */ 7958 DRXJ_16TO8(110), /* re23 */ 7959 DRXJ_16TO8(31), /* re24 */ 7960 DRXJ_16TO8(-201), /* re25 */ 7961 DRXJ_16TO8(-32), /* re26 */ 7962 DRXJ_16TO8(628) /* re27 */ 7963 }; 7964 static const u8 qam_c_taps[] = { 7965 DRXJ_16TO8(-3), /* re0 */ 7966 DRXJ_16TO8(3), /* re1 */ 7967 DRXJ_16TO8(2), /* re2 */ 7968 DRXJ_16TO8(-4), /* re3 */ 7969 DRXJ_16TO8(0), /* re4 */ 7970 DRXJ_16TO8(4), /* re5 */ 7971 DRXJ_16TO8(-1), /* re6 */ 7972 DRXJ_16TO8(-4), /* re7 */ 7973 DRXJ_16TO8(3), /* re8 */ 7974 DRXJ_16TO8(3), /* re9 */ 7975 DRXJ_16TO8(-5), /* re10 */ 7976 DRXJ_16TO8(0), /* re11 */ 7977 DRXJ_16TO8(9), /* re12 */ 7978 DRXJ_16TO8(-4), /* re13 */ 7979 DRXJ_16TO8(-12), /* re14 */ 7980 DRXJ_16TO8(10), /* re15 */ 7981 DRXJ_16TO8(16), /* re16 */ 7982 DRXJ_16TO8(-21), /* re17 */ 7983 DRXJ_16TO8(-20), /* re18 */ 7984 DRXJ_16TO8(37), /* re19 */ 7985 DRXJ_16TO8(25), /* re20 */ 7986 DRXJ_16TO8(-62), /* re21 */ 7987 DRXJ_16TO8(-28), /* re22 */ 7988 DRXJ_16TO8(105), /* re23 */ 7989 DRXJ_16TO8(31), /* re24 */ 7990 DRXJ_16TO8(-197), /* re25 */ 7991 DRXJ_16TO8(-33), /* re26 */ 7992 DRXJ_16TO8(626) /* re27 */ 7993 }; 7994 7995 dev_addr = demod->my_i2c_dev_addr; 7996 ext_attr = (struct drxj_data *) demod->my_ext_attr; 7997 common_attr = (struct drx_common_attr *) demod->my_common_attr; 7998 7999 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8000 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8001 switch (channel->constellation) { 8002 case DRX_CONSTELLATION_QAM256: 8003 iqm_rc_rate = 0x00AE3562; 8004 lc_symbol_freq = 8005 QAM_LC_SYMBOL_FREQ_FREQ_QAM_B_256; 8006 channel->symbolrate = 5360537; 8007 iqm_rc_stretch = IQM_RC_STRETCH_QAM_B_256; 8008 break; 8009 case DRX_CONSTELLATION_QAM64: 8010 iqm_rc_rate = 0x00C05A0E; 8011 lc_symbol_freq = 409; 8012 channel->symbolrate = 5056941; 8013 iqm_rc_stretch = IQM_RC_STRETCH_QAM_B_64; 8014 break; 8015 default: 8016 return -EINVAL; 8017 } 8018 } else { 8019 adc_frequency = (common_attr->sys_clock_freq * 1000) / 3; 8020 if (channel->symbolrate == 0) { 8021 pr_err("error: channel symbolrate is zero!\n"); 8022 return -EIO; 8023 } 8024 iqm_rc_rate = 8025 (adc_frequency / channel->symbolrate) * (1 << 21) + 8026 (frac28 8027 ((adc_frequency % channel->symbolrate), 8028 channel->symbolrate) >> 7) - (1 << 23); 8029 lc_symbol_freq = 8030 (u16) (frac28 8031 (channel->symbolrate + 8032 (adc_frequency >> 13), 8033 adc_frequency) >> 16); 8034 if (lc_symbol_freq > 511) 8035 lc_symbol_freq = 511; 8036 8037 iqm_rc_stretch = 21; 8038 } 8039 8040 if (ext_attr->standard == DRX_STANDARD_ITU_A) { 8041 set_env_parameters = QAM_TOP_ANNEX_A; /* annex */ 8042 set_param_parameters[0] = channel->constellation; /* constellation */ 8043 set_param_parameters[1] = DRX_INTERLEAVEMODE_I12_J17; /* interleave mode */ 8044 } else if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8045 set_env_parameters = QAM_TOP_ANNEX_B; /* annex */ 8046 set_param_parameters[0] = channel->constellation; /* constellation */ 8047 set_param_parameters[1] = channel->interleavemode; /* interleave mode */ 8048 } else if (ext_attr->standard == DRX_STANDARD_ITU_C) { 8049 set_env_parameters = QAM_TOP_ANNEX_C; /* annex */ 8050 set_param_parameters[0] = channel->constellation; /* constellation */ 8051 set_param_parameters[1] = DRX_INTERLEAVEMODE_I12_J17; /* interleave mode */ 8052 } else { 8053 return -EINVAL; 8054 } 8055 } 8056 8057 if (op & QAM_SET_OP_ALL) { 8058 /* 8059 STEP 1: reset demodulator 8060 resets IQM, QAM and FEC HW blocks 8061 resets SCU variables 8062 */ 8063 /* stop all comm_exec */ 8064 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP, 0); 8065 if (rc != 0) { 8066 pr_err("error %d\n", rc); 8067 goto rw_error; 8068 } 8069 rc = drxj_dap_write_reg16(dev_addr, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP, 0); 8070 if (rc != 0) { 8071 pr_err("error %d\n", rc); 8072 goto rw_error; 8073 } 8074 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 8075 if (rc != 0) { 8076 pr_err("error %d\n", rc); 8077 goto rw_error; 8078 } 8079 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 8080 if (rc != 0) { 8081 pr_err("error %d\n", rc); 8082 goto rw_error; 8083 } 8084 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 8085 if (rc != 0) { 8086 pr_err("error %d\n", rc); 8087 goto rw_error; 8088 } 8089 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 8090 if (rc != 0) { 8091 pr_err("error %d\n", rc); 8092 goto rw_error; 8093 } 8094 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 8095 if (rc != 0) { 8096 pr_err("error %d\n", rc); 8097 goto rw_error; 8098 } 8099 8100 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8101 SCU_RAM_COMMAND_CMD_DEMOD_RESET; 8102 cmd_scu.parameter_len = 0; 8103 cmd_scu.result_len = 1; 8104 cmd_scu.parameter = NULL; 8105 cmd_scu.result = &cmd_result; 8106 rc = scu_command(dev_addr, &cmd_scu); 8107 if (rc != 0) { 8108 pr_err("error %d\n", rc); 8109 goto rw_error; 8110 } 8111 } 8112 8113 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8114 /* 8115 STEP 2: configure demodulator 8116 -set env 8117 -set params (resets IQM,QAM,FEC HW; initializes some SCU variables ) 8118 */ 8119 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8120 SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV; 8121 cmd_scu.parameter_len = 1; 8122 cmd_scu.result_len = 1; 8123 cmd_scu.parameter = &set_env_parameters; 8124 cmd_scu.result = &cmd_result; 8125 rc = scu_command(dev_addr, &cmd_scu); 8126 if (rc != 0) { 8127 pr_err("error %d\n", rc); 8128 goto rw_error; 8129 } 8130 8131 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8132 SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM; 8133 cmd_scu.parameter_len = 2; 8134 cmd_scu.result_len = 1; 8135 cmd_scu.parameter = set_param_parameters; 8136 cmd_scu.result = &cmd_result; 8137 rc = scu_command(dev_addr, &cmd_scu); 8138 if (rc != 0) { 8139 pr_err("error %d\n", rc); 8140 goto rw_error; 8141 } 8142 /* set symbol rate */ 8143 rc = drxdap_fasi_write_reg32(dev_addr, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate, 0); 8144 if (rc != 0) { 8145 pr_err("error %d\n", rc); 8146 goto rw_error; 8147 } 8148 ext_attr->iqm_rc_rate_ofs = iqm_rc_rate; 8149 rc = set_qam_measurement(demod, channel->constellation, channel->symbolrate); 8150 if (rc != 0) { 8151 pr_err("error %d\n", rc); 8152 goto rw_error; 8153 } 8154 } 8155 /* STEP 3: enable the system in a mode where the ADC provides valid signal 8156 setup constellation independent registers */ 8157 /* from qam_cmd.py script (qam_driver_b) */ 8158 /* TODO: remove re-writes of HW reset values */ 8159 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_SPECTRUM)) { 8160 rc = set_frequency(demod, channel, tuner_freq_offset); 8161 if (rc != 0) { 8162 pr_err("error %d\n", rc); 8163 goto rw_error; 8164 } 8165 } 8166 8167 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8168 8169 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_SYMBOL_FREQ__A, lc_symbol_freq, 0); 8170 if (rc != 0) { 8171 pr_err("error %d\n", rc); 8172 goto rw_error; 8173 } 8174 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_STRETCH__A, iqm_rc_stretch, 0); 8175 if (rc != 0) { 8176 pr_err("error %d\n", rc); 8177 goto rw_error; 8178 } 8179 } 8180 8181 if (op & QAM_SET_OP_ALL) { 8182 if (!ext_attr->has_lna) { 8183 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_AMUX__A, 0x02, 0); 8184 if (rc != 0) { 8185 pr_err("error %d\n", rc); 8186 goto rw_error; 8187 } 8188 } 8189 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SYMMETRIC__A, 0, 0); 8190 if (rc != 0) { 8191 pr_err("error %d\n", rc); 8192 goto rw_error; 8193 } 8194 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_MIDTAP__A, 3, 0); 8195 if (rc != 0) { 8196 pr_err("error %d\n", rc); 8197 goto rw_error; 8198 } 8199 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_OUT_ENA__A, IQM_CF_OUT_ENA_QAM__M, 0); 8200 if (rc != 0) { 8201 pr_err("error %d\n", rc); 8202 goto rw_error; 8203 } 8204 8205 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_WR_RSV_0__A, 0x5f, 0); 8206 if (rc != 0) { 8207 pr_err("error %d\n", rc); 8208 goto rw_error; 8209 } /* scu temporary shut down agc */ 8210 8211 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_SYNC_SEL__A, 3, 0); 8212 if (rc != 0) { 8213 pr_err("error %d\n", rc); 8214 goto rw_error; 8215 } 8216 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_LEN__A, 0, 0); 8217 if (rc != 0) { 8218 pr_err("error %d\n", rc); 8219 goto rw_error; 8220 } 8221 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_CLP_TH__A, 448, 0); 8222 if (rc != 0) { 8223 pr_err("error %d\n", rc); 8224 goto rw_error; 8225 } 8226 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_SNS_LEN__A, 0, 0); 8227 if (rc != 0) { 8228 pr_err("error %d\n", rc); 8229 goto rw_error; 8230 } 8231 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PDREF__A, 4, 0); 8232 if (rc != 0) { 8233 pr_err("error %d\n", rc); 8234 goto rw_error; 8235 } 8236 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_STDBY__A, 0x10, 0); 8237 if (rc != 0) { 8238 pr_err("error %d\n", rc); 8239 goto rw_error; 8240 } 8241 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PGA_GAIN__A, 11, 0); 8242 if (rc != 0) { 8243 pr_err("error %d\n", rc); 8244 goto rw_error; 8245 } 8246 8247 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_POW_MEAS_LEN__A, 1, 0); 8248 if (rc != 0) { 8249 pr_err("error %d\n", rc); 8250 goto rw_error; 8251 } 8252 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE, 0); 8253 if (rc != 0) { 8254 pr_err("error %d\n", rc); 8255 goto rw_error; 8256 } /*! reset default val ! */ 8257 8258 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE, 0); 8259 if (rc != 0) { 8260 pr_err("error %d\n", rc); 8261 goto rw_error; 8262 } /*! reset default val ! */ 8263 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8264 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_LWM__A, QAM_SY_SYNC_LWM__PRE, 0); 8265 if (rc != 0) { 8266 pr_err("error %d\n", rc); 8267 goto rw_error; 8268 } /*! reset default val ! */ 8269 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_AWM__A, QAM_SY_SYNC_AWM__PRE, 0); 8270 if (rc != 0) { 8271 pr_err("error %d\n", rc); 8272 goto rw_error; 8273 } /*! reset default val ! */ 8274 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_HWM__A, QAM_SY_SYNC_HWM__PRE, 0); 8275 if (rc != 0) { 8276 pr_err("error %d\n", rc); 8277 goto rw_error; 8278 } /*! reset default val ! */ 8279 } else { 8280 switch (channel->constellation) { 8281 case DRX_CONSTELLATION_QAM16: 8282 case DRX_CONSTELLATION_QAM64: 8283 case DRX_CONSTELLATION_QAM256: 8284 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_LWM__A, 0x03, 0); 8285 if (rc != 0) { 8286 pr_err("error %d\n", rc); 8287 goto rw_error; 8288 } 8289 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_AWM__A, 0x04, 0); 8290 if (rc != 0) { 8291 pr_err("error %d\n", rc); 8292 goto rw_error; 8293 } 8294 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_HWM__A, QAM_SY_SYNC_HWM__PRE, 0); 8295 if (rc != 0) { 8296 pr_err("error %d\n", rc); 8297 goto rw_error; 8298 } /*! reset default val ! */ 8299 break; 8300 case DRX_CONSTELLATION_QAM32: 8301 case DRX_CONSTELLATION_QAM128: 8302 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_LWM__A, 0x03, 0); 8303 if (rc != 0) { 8304 pr_err("error %d\n", rc); 8305 goto rw_error; 8306 } 8307 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_AWM__A, 0x05, 0); 8308 if (rc != 0) { 8309 pr_err("error %d\n", rc); 8310 goto rw_error; 8311 } 8312 rc = drxj_dap_write_reg16(dev_addr, QAM_SY_SYNC_HWM__A, 0x06, 0); 8313 if (rc != 0) { 8314 pr_err("error %d\n", rc); 8315 goto rw_error; 8316 } 8317 break; 8318 default: 8319 return -EIO; 8320 } /* switch */ 8321 } 8322 8323 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_MODE__A, QAM_LC_MODE__PRE, 0); 8324 if (rc != 0) { 8325 pr_err("error %d\n", rc); 8326 goto rw_error; 8327 } /*! reset default val ! */ 8328 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_RATE_LIMIT__A, 3, 0); 8329 if (rc != 0) { 8330 pr_err("error %d\n", rc); 8331 goto rw_error; 8332 } 8333 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_LPF_FACTORP__A, 4, 0); 8334 if (rc != 0) { 8335 pr_err("error %d\n", rc); 8336 goto rw_error; 8337 } 8338 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_LPF_FACTORI__A, 4, 0); 8339 if (rc != 0) { 8340 pr_err("error %d\n", rc); 8341 goto rw_error; 8342 } 8343 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_MODE__A, 7, 0); 8344 if (rc != 0) { 8345 pr_err("error %d\n", rc); 8346 goto rw_error; 8347 } 8348 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB0__A, 1, 0); 8349 if (rc != 0) { 8350 pr_err("error %d\n", rc); 8351 goto rw_error; 8352 } 8353 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB1__A, 1, 0); 8354 if (rc != 0) { 8355 pr_err("error %d\n", rc); 8356 goto rw_error; 8357 } 8358 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB2__A, 1, 0); 8359 if (rc != 0) { 8360 pr_err("error %d\n", rc); 8361 goto rw_error; 8362 } 8363 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB3__A, 1, 0); 8364 if (rc != 0) { 8365 pr_err("error %d\n", rc); 8366 goto rw_error; 8367 } 8368 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB4__A, 2, 0); 8369 if (rc != 0) { 8370 pr_err("error %d\n", rc); 8371 goto rw_error; 8372 } 8373 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB5__A, 2, 0); 8374 if (rc != 0) { 8375 pr_err("error %d\n", rc); 8376 goto rw_error; 8377 } 8378 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB6__A, 2, 0); 8379 if (rc != 0) { 8380 pr_err("error %d\n", rc); 8381 goto rw_error; 8382 } 8383 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB8__A, 2, 0); 8384 if (rc != 0) { 8385 pr_err("error %d\n", rc); 8386 goto rw_error; 8387 } 8388 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB9__A, 2, 0); 8389 if (rc != 0) { 8390 pr_err("error %d\n", rc); 8391 goto rw_error; 8392 } 8393 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB10__A, 2, 0); 8394 if (rc != 0) { 8395 pr_err("error %d\n", rc); 8396 goto rw_error; 8397 } 8398 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB12__A, 2, 0); 8399 if (rc != 0) { 8400 pr_err("error %d\n", rc); 8401 goto rw_error; 8402 } 8403 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB15__A, 3, 0); 8404 if (rc != 0) { 8405 pr_err("error %d\n", rc); 8406 goto rw_error; 8407 } 8408 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB16__A, 3, 0); 8409 if (rc != 0) { 8410 pr_err("error %d\n", rc); 8411 goto rw_error; 8412 } 8413 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB20__A, 4, 0); 8414 if (rc != 0) { 8415 pr_err("error %d\n", rc); 8416 goto rw_error; 8417 } 8418 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_QUAL_TAB25__A, 4, 0); 8419 if (rc != 0) { 8420 pr_err("error %d\n", rc); 8421 goto rw_error; 8422 } 8423 8424 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_ADJ_SEL__A, 1, 0); 8425 if (rc != 0) { 8426 pr_err("error %d\n", rc); 8427 goto rw_error; 8428 } 8429 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_ADJ_SEL__A, 1, 0); 8430 if (rc != 0) { 8431 pr_err("error %d\n", rc); 8432 goto rw_error; 8433 } 8434 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_ADJ_SEL__A, 1, 0); 8435 if (rc != 0) { 8436 pr_err("error %d\n", rc); 8437 goto rw_error; 8438 } 8439 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_POW_MEAS_LEN__A, 0, 0); 8440 if (rc != 0) { 8441 pr_err("error %d\n", rc); 8442 goto rw_error; 8443 } 8444 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_GPIO__A, 0, 0); 8445 if (rc != 0) { 8446 pr_err("error %d\n", rc); 8447 goto rw_error; 8448 } 8449 8450 /* No more resets of the IQM, current standard correctly set => 8451 now AGCs can be configured. */ 8452 /* turn on IQMAF. It has to be in front of setAgc**() */ 8453 rc = set_iqm_af(demod, true); 8454 if (rc != 0) { 8455 pr_err("error %d\n", rc); 8456 goto rw_error; 8457 } 8458 rc = adc_synchronization(demod); 8459 if (rc != 0) { 8460 pr_err("error %d\n", rc); 8461 goto rw_error; 8462 } 8463 8464 rc = init_agc(demod); 8465 if (rc != 0) { 8466 pr_err("error %d\n", rc); 8467 goto rw_error; 8468 } 8469 rc = set_agc_if(demod, &(ext_attr->qam_if_agc_cfg), false); 8470 if (rc != 0) { 8471 pr_err("error %d\n", rc); 8472 goto rw_error; 8473 } 8474 rc = set_agc_rf(demod, &(ext_attr->qam_rf_agc_cfg), false); 8475 if (rc != 0) { 8476 pr_err("error %d\n", rc); 8477 goto rw_error; 8478 } 8479 { 8480 /* TODO fix this, store a struct drxj_cfg_afe_gain structure in struct drxj_data instead 8481 of only the gain */ 8482 struct drxj_cfg_afe_gain qam_pga_cfg = { DRX_STANDARD_ITU_B, 0 }; 8483 8484 qam_pga_cfg.gain = ext_attr->qam_pga_cfg; 8485 rc = ctrl_set_cfg_afe_gain(demod, &qam_pga_cfg); 8486 if (rc != 0) { 8487 pr_err("error %d\n", rc); 8488 goto rw_error; 8489 } 8490 } 8491 rc = ctrl_set_cfg_pre_saw(demod, &(ext_attr->qam_pre_saw_cfg)); 8492 if (rc != 0) { 8493 pr_err("error %d\n", rc); 8494 goto rw_error; 8495 } 8496 } 8497 8498 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8499 if (ext_attr->standard == DRX_STANDARD_ITU_A) { 8500 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_a_taps), ((u8 *)qam_a_taps), 0); 8501 if (rc != 0) { 8502 pr_err("error %d\n", rc); 8503 goto rw_error; 8504 } 8505 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_a_taps), ((u8 *)qam_a_taps), 0); 8506 if (rc != 0) { 8507 pr_err("error %d\n", rc); 8508 goto rw_error; 8509 } 8510 } else if (ext_attr->standard == DRX_STANDARD_ITU_B) { 8511 switch (channel->constellation) { 8512 case DRX_CONSTELLATION_QAM64: 8513 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_b64_taps), ((u8 *)qam_b64_taps), 0); 8514 if (rc != 0) { 8515 pr_err("error %d\n", rc); 8516 goto rw_error; 8517 } 8518 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_b64_taps), ((u8 *)qam_b64_taps), 0); 8519 if (rc != 0) { 8520 pr_err("error %d\n", rc); 8521 goto rw_error; 8522 } 8523 break; 8524 case DRX_CONSTELLATION_QAM256: 8525 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_b256_taps), ((u8 *)qam_b256_taps), 0); 8526 if (rc != 0) { 8527 pr_err("error %d\n", rc); 8528 goto rw_error; 8529 } 8530 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_b256_taps), ((u8 *)qam_b256_taps), 0); 8531 if (rc != 0) { 8532 pr_err("error %d\n", rc); 8533 goto rw_error; 8534 } 8535 break; 8536 default: 8537 return -EIO; 8538 } 8539 } else if (ext_attr->standard == DRX_STANDARD_ITU_C) { 8540 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_RE0__A, sizeof(qam_c_taps), ((u8 *)qam_c_taps), 0); 8541 if (rc != 0) { 8542 pr_err("error %d\n", rc); 8543 goto rw_error; 8544 } 8545 rc = drxdap_fasi_write_block(dev_addr, IQM_CF_TAP_IM0__A, sizeof(qam_c_taps), ((u8 *)qam_c_taps), 0); 8546 if (rc != 0) { 8547 pr_err("error %d\n", rc); 8548 goto rw_error; 8549 } 8550 } 8551 8552 /* SETP 4: constellation specific setup */ 8553 switch (channel->constellation) { 8554 case DRX_CONSTELLATION_QAM16: 8555 rc = set_qam16(demod); 8556 if (rc != 0) { 8557 pr_err("error %d\n", rc); 8558 goto rw_error; 8559 } 8560 break; 8561 case DRX_CONSTELLATION_QAM32: 8562 rc = set_qam32(demod); 8563 if (rc != 0) { 8564 pr_err("error %d\n", rc); 8565 goto rw_error; 8566 } 8567 break; 8568 case DRX_CONSTELLATION_QAM64: 8569 rc = set_qam64(demod); 8570 if (rc != 0) { 8571 pr_err("error %d\n", rc); 8572 goto rw_error; 8573 } 8574 break; 8575 case DRX_CONSTELLATION_QAM128: 8576 rc = set_qam128(demod); 8577 if (rc != 0) { 8578 pr_err("error %d\n", rc); 8579 goto rw_error; 8580 } 8581 break; 8582 case DRX_CONSTELLATION_QAM256: 8583 rc = set_qam256(demod); 8584 if (rc != 0) { 8585 pr_err("error %d\n", rc); 8586 goto rw_error; 8587 } 8588 break; 8589 default: 8590 return -EIO; 8591 } /* switch */ 8592 } 8593 8594 if ((op & QAM_SET_OP_ALL)) { 8595 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_SCALE_SH__A, 0, 0); 8596 if (rc != 0) { 8597 pr_err("error %d\n", rc); 8598 goto rw_error; 8599 } 8600 8601 /* Mpeg output has to be in front of FEC active */ 8602 rc = set_mpegtei_handling(demod); 8603 if (rc != 0) { 8604 pr_err("error %d\n", rc); 8605 goto rw_error; 8606 } 8607 rc = bit_reverse_mpeg_output(demod); 8608 if (rc != 0) { 8609 pr_err("error %d\n", rc); 8610 goto rw_error; 8611 } 8612 rc = set_mpeg_start_width(demod); 8613 if (rc != 0) { 8614 pr_err("error %d\n", rc); 8615 goto rw_error; 8616 } 8617 { 8618 /* TODO: move to set_standard after hardware reset value problem is solved */ 8619 /* Configure initial MPEG output */ 8620 struct drx_cfg_mpeg_output cfg_mpeg_output; 8621 8622 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 8623 cfg_mpeg_output.enable_mpeg_output = true; 8624 8625 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 8626 if (rc != 0) { 8627 pr_err("error %d\n", rc); 8628 goto rw_error; 8629 } 8630 } 8631 } 8632 8633 if ((op & QAM_SET_OP_ALL) || (op & QAM_SET_OP_CONSTELLATION)) { 8634 8635 /* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */ 8636 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 8637 SCU_RAM_COMMAND_CMD_DEMOD_START; 8638 cmd_scu.parameter_len = 0; 8639 cmd_scu.result_len = 1; 8640 cmd_scu.parameter = NULL; 8641 cmd_scu.result = &cmd_result; 8642 rc = scu_command(dev_addr, &cmd_scu); 8643 if (rc != 0) { 8644 pr_err("error %d\n", rc); 8645 goto rw_error; 8646 } 8647 } 8648 8649 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_ACTIVE, 0); 8650 if (rc != 0) { 8651 pr_err("error %d\n", rc); 8652 goto rw_error; 8653 } 8654 rc = drxj_dap_write_reg16(dev_addr, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE, 0); 8655 if (rc != 0) { 8656 pr_err("error %d\n", rc); 8657 goto rw_error; 8658 } 8659 rc = drxj_dap_write_reg16(dev_addr, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE, 0); 8660 if (rc != 0) { 8661 pr_err("error %d\n", rc); 8662 goto rw_error; 8663 } 8664 8665 return 0; 8666 rw_error: 8667 return rc; 8668 } 8669 8670 /*============================================================================*/ 8671 static int ctrl_get_qam_sig_quality(struct drx_demod_instance *demod); 8672 8673 static int qam_flip_spec(struct drx_demod_instance *demod, struct drx_channel *channel) 8674 { 8675 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 8676 struct drxj_data *ext_attr = demod->my_ext_attr; 8677 int rc; 8678 u32 iqm_fs_rate_ofs = 0; 8679 u32 iqm_fs_rate_lo = 0; 8680 u16 qam_ctl_ena = 0; 8681 u16 data = 0; 8682 u16 equ_mode = 0; 8683 u16 fsm_state = 0; 8684 int i = 0; 8685 int ofsofs = 0; 8686 8687 /* Silence the controlling of lc, equ, and the acquisition state machine */ 8688 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_QAM_CTL_ENA__A, &qam_ctl_ena, 0); 8689 if (rc != 0) { 8690 pr_err("error %d\n", rc); 8691 goto rw_error; 8692 } 8693 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_CTL_ENA__A, qam_ctl_ena & ~(SCU_RAM_QAM_CTL_ENA_ACQ__M | SCU_RAM_QAM_CTL_ENA_EQU__M | SCU_RAM_QAM_CTL_ENA_LC__M), 0); 8694 if (rc != 0) { 8695 pr_err("error %d\n", rc); 8696 goto rw_error; 8697 } 8698 8699 /* freeze the frequency control loop */ 8700 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_CF__A, 0, 0); 8701 if (rc != 0) { 8702 pr_err("error %d\n", rc); 8703 goto rw_error; 8704 } 8705 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_CF1__A, 0, 0); 8706 if (rc != 0) { 8707 pr_err("error %d\n", rc); 8708 goto rw_error; 8709 } 8710 8711 rc = drxj_dap_atomic_read_reg32(dev_addr, IQM_FS_RATE_OFS_LO__A, &iqm_fs_rate_ofs, 0); 8712 if (rc != 0) { 8713 pr_err("error %d\n", rc); 8714 goto rw_error; 8715 } 8716 rc = drxj_dap_atomic_read_reg32(dev_addr, IQM_FS_RATE_LO__A, &iqm_fs_rate_lo, 0); 8717 if (rc != 0) { 8718 pr_err("error %d\n", rc); 8719 goto rw_error; 8720 } 8721 ofsofs = iqm_fs_rate_lo - iqm_fs_rate_ofs; 8722 iqm_fs_rate_ofs = ~iqm_fs_rate_ofs + 1; 8723 iqm_fs_rate_ofs -= 2 * ofsofs; 8724 8725 /* freeze dq/fq updating */ 8726 rc = drxj_dap_read_reg16(dev_addr, QAM_DQ_MODE__A, &data, 0); 8727 if (rc != 0) { 8728 pr_err("error %d\n", rc); 8729 goto rw_error; 8730 } 8731 data = (data & 0xfff9); 8732 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_MODE__A, data, 0); 8733 if (rc != 0) { 8734 pr_err("error %d\n", rc); 8735 goto rw_error; 8736 } 8737 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_MODE__A, data, 0); 8738 if (rc != 0) { 8739 pr_err("error %d\n", rc); 8740 goto rw_error; 8741 } 8742 8743 /* lc_cp / _ci / _ca */ 8744 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_CI__A, 0, 0); 8745 if (rc != 0) { 8746 pr_err("error %d\n", rc); 8747 goto rw_error; 8748 } 8749 rc = drxj_dap_write_reg16(dev_addr, QAM_LC_EP__A, 0, 0); 8750 if (rc != 0) { 8751 pr_err("error %d\n", rc); 8752 goto rw_error; 8753 } 8754 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_LA_FACTOR__A, 0, 0); 8755 if (rc != 0) { 8756 pr_err("error %d\n", rc); 8757 goto rw_error; 8758 } 8759 8760 /* flip the spec */ 8761 rc = drxdap_fasi_write_reg32(dev_addr, IQM_FS_RATE_OFS_LO__A, iqm_fs_rate_ofs, 0); 8762 if (rc != 0) { 8763 pr_err("error %d\n", rc); 8764 goto rw_error; 8765 } 8766 ext_attr->iqm_fs_rate_ofs = iqm_fs_rate_ofs; 8767 ext_attr->pos_image = (ext_attr->pos_image) ? false : true; 8768 8769 /* freeze dq/fq updating */ 8770 rc = drxj_dap_read_reg16(dev_addr, QAM_DQ_MODE__A, &data, 0); 8771 if (rc != 0) { 8772 pr_err("error %d\n", rc); 8773 goto rw_error; 8774 } 8775 equ_mode = data; 8776 data = (data & 0xfff9); 8777 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_MODE__A, data, 0); 8778 if (rc != 0) { 8779 pr_err("error %d\n", rc); 8780 goto rw_error; 8781 } 8782 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_MODE__A, data, 0); 8783 if (rc != 0) { 8784 pr_err("error %d\n", rc); 8785 goto rw_error; 8786 } 8787 8788 for (i = 0; i < 28; i++) { 8789 rc = drxj_dap_read_reg16(dev_addr, QAM_DQ_TAP_IM_EL0__A + (2 * i), &data, 0); 8790 if (rc != 0) { 8791 pr_err("error %d\n", rc); 8792 goto rw_error; 8793 } 8794 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_TAP_IM_EL0__A + (2 * i), -data, 0); 8795 if (rc != 0) { 8796 pr_err("error %d\n", rc); 8797 goto rw_error; 8798 } 8799 } 8800 8801 for (i = 0; i < 24; i++) { 8802 rc = drxj_dap_read_reg16(dev_addr, QAM_FQ_TAP_IM_EL0__A + (2 * i), &data, 0); 8803 if (rc != 0) { 8804 pr_err("error %d\n", rc); 8805 goto rw_error; 8806 } 8807 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_TAP_IM_EL0__A + (2 * i), -data, 0); 8808 if (rc != 0) { 8809 pr_err("error %d\n", rc); 8810 goto rw_error; 8811 } 8812 } 8813 8814 data = equ_mode; 8815 rc = drxj_dap_write_reg16(dev_addr, QAM_DQ_MODE__A, data, 0); 8816 if (rc != 0) { 8817 pr_err("error %d\n", rc); 8818 goto rw_error; 8819 } 8820 rc = drxj_dap_write_reg16(dev_addr, QAM_FQ_MODE__A, data, 0); 8821 if (rc != 0) { 8822 pr_err("error %d\n", rc); 8823 goto rw_error; 8824 } 8825 8826 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_FSM_STATE_TGT__A, 4, 0); 8827 if (rc != 0) { 8828 pr_err("error %d\n", rc); 8829 goto rw_error; 8830 } 8831 8832 i = 0; 8833 while ((fsm_state != 4) && (i++ < 100)) { 8834 rc = drxj_dap_read_reg16(dev_addr, SCU_RAM_QAM_FSM_STATE__A, &fsm_state, 0); 8835 if (rc != 0) { 8836 pr_err("error %d\n", rc); 8837 goto rw_error; 8838 } 8839 } 8840 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_QAM_CTL_ENA__A, (qam_ctl_ena | 0x0016), 0); 8841 if (rc != 0) { 8842 pr_err("error %d\n", rc); 8843 goto rw_error; 8844 } 8845 8846 return 0; 8847 rw_error: 8848 return rc; 8849 8850 } 8851 8852 #define NO_LOCK 0x0 8853 #define DEMOD_LOCKED 0x1 8854 #define SYNC_FLIPPED 0x2 8855 #define SPEC_MIRRORED 0x4 8856 /* 8857 * \fn int qam64auto () 8858 * \brief auto do sync pattern switching and mirroring. 8859 * \param demod: instance of demod. 8860 * \param channel: pointer to channel data. 8861 * \param tuner_freq_offset: tuner frequency offset. 8862 * \param lock_status: pointer to lock status. 8863 * \return int. 8864 */ 8865 static int 8866 qam64auto(struct drx_demod_instance *demod, 8867 struct drx_channel *channel, 8868 s32 tuner_freq_offset, enum drx_lock_status *lock_status) 8869 { 8870 struct drxj_data *ext_attr = demod->my_ext_attr; 8871 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 8872 struct drx39xxj_state *state = dev_addr->user_data; 8873 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 8874 int rc; 8875 u32 lck_state = NO_LOCK; 8876 u32 start_time = 0; 8877 u32 d_locked_time = 0; 8878 u32 timeout_ofs = 0; 8879 u16 data = 0; 8880 8881 /* external attributes for storing acquired channel constellation */ 8882 *lock_status = DRX_NOT_LOCKED; 8883 start_time = jiffies_to_msecs(jiffies); 8884 lck_state = NO_LOCK; 8885 do { 8886 rc = ctrl_lock_status(demod, lock_status); 8887 if (rc != 0) { 8888 pr_err("error %d\n", rc); 8889 goto rw_error; 8890 } 8891 8892 switch (lck_state) { 8893 case NO_LOCK: 8894 if (*lock_status == DRXJ_DEMOD_LOCK) { 8895 rc = ctrl_get_qam_sig_quality(demod); 8896 if (rc != 0) { 8897 pr_err("error %d\n", rc); 8898 goto rw_error; 8899 } 8900 if (p->cnr.stat[0].svalue > 20800) { 8901 lck_state = DEMOD_LOCKED; 8902 /* some delay to see if fec_lock possible TODO find the right value */ 8903 timeout_ofs += DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME; /* see something, waiting longer */ 8904 d_locked_time = jiffies_to_msecs(jiffies); 8905 } 8906 } 8907 break; 8908 case DEMOD_LOCKED: 8909 if ((*lock_status == DRXJ_DEMOD_LOCK) && /* still demod_lock in 150ms */ 8910 ((jiffies_to_msecs(jiffies) - d_locked_time) > 8911 DRXJ_QAM_FEC_LOCK_WAITTIME)) { 8912 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, &data, 0); 8913 if (rc != 0) { 8914 pr_err("error %d\n", rc); 8915 goto rw_error; 8916 } 8917 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, data | 0x1, 0); 8918 if (rc != 0) { 8919 pr_err("error %d\n", rc); 8920 goto rw_error; 8921 } 8922 lck_state = SYNC_FLIPPED; 8923 msleep(10); 8924 } 8925 break; 8926 case SYNC_FLIPPED: 8927 if (*lock_status == DRXJ_DEMOD_LOCK) { 8928 if (channel->mirror == DRX_MIRROR_AUTO) { 8929 /* flip sync pattern back */ 8930 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, &data, 0); 8931 if (rc != 0) { 8932 pr_err("error %d\n", rc); 8933 goto rw_error; 8934 } 8935 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, data & 0xFFFE, 0); 8936 if (rc != 0) { 8937 pr_err("error %d\n", rc); 8938 goto rw_error; 8939 } 8940 /* flip spectrum */ 8941 ext_attr->mirror = DRX_MIRROR_YES; 8942 rc = qam_flip_spec(demod, channel); 8943 if (rc != 0) { 8944 pr_err("error %d\n", rc); 8945 goto rw_error; 8946 } 8947 lck_state = SPEC_MIRRORED; 8948 /* reset timer TODO: still need 500ms? */ 8949 start_time = d_locked_time = 8950 jiffies_to_msecs(jiffies); 8951 timeout_ofs = 0; 8952 } else { /* no need to wait lock */ 8953 8954 start_time = 8955 jiffies_to_msecs(jiffies) - 8956 DRXJ_QAM_MAX_WAITTIME - timeout_ofs; 8957 } 8958 } 8959 break; 8960 case SPEC_MIRRORED: 8961 if ((*lock_status == DRXJ_DEMOD_LOCK) && /* still demod_lock in 150ms */ 8962 ((jiffies_to_msecs(jiffies) - d_locked_time) > 8963 DRXJ_QAM_FEC_LOCK_WAITTIME)) { 8964 rc = ctrl_get_qam_sig_quality(demod); 8965 if (rc != 0) { 8966 pr_err("error %d\n", rc); 8967 goto rw_error; 8968 } 8969 if (p->cnr.stat[0].svalue > 20800) { 8970 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, &data, 0); 8971 if (rc != 0) { 8972 pr_err("error %d\n", rc); 8973 goto rw_error; 8974 } 8975 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, QAM_SY_TIMEOUT__A, data | 0x1, 0); 8976 if (rc != 0) { 8977 pr_err("error %d\n", rc); 8978 goto rw_error; 8979 } 8980 /* no need to wait lock */ 8981 start_time = 8982 jiffies_to_msecs(jiffies) - 8983 DRXJ_QAM_MAX_WAITTIME - timeout_ofs; 8984 } 8985 } 8986 break; 8987 default: 8988 break; 8989 } 8990 msleep(10); 8991 } while 8992 ((*lock_status != DRX_LOCKED) && 8993 (*lock_status != DRX_NEVER_LOCK) && 8994 ((jiffies_to_msecs(jiffies) - start_time) < 8995 (DRXJ_QAM_MAX_WAITTIME + timeout_ofs)) 8996 ); 8997 /* Returning control to application ... */ 8998 8999 return 0; 9000 rw_error: 9001 return rc; 9002 } 9003 9004 /* 9005 * \fn int qam256auto () 9006 * \brief auto do sync pattern switching and mirroring. 9007 * \param demod: instance of demod. 9008 * \param channel: pointer to channel data. 9009 * \param tuner_freq_offset: tuner frequency offset. 9010 * \param lock_status: pointer to lock status. 9011 * \return int. 9012 */ 9013 static int 9014 qam256auto(struct drx_demod_instance *demod, 9015 struct drx_channel *channel, 9016 s32 tuner_freq_offset, enum drx_lock_status *lock_status) 9017 { 9018 struct drxj_data *ext_attr = demod->my_ext_attr; 9019 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9020 struct drx39xxj_state *state = dev_addr->user_data; 9021 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 9022 int rc; 9023 u32 lck_state = NO_LOCK; 9024 u32 start_time = 0; 9025 u32 d_locked_time = 0; 9026 u32 timeout_ofs = DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME; 9027 9028 /* external attributes for storing acquired channel constellation */ 9029 *lock_status = DRX_NOT_LOCKED; 9030 start_time = jiffies_to_msecs(jiffies); 9031 lck_state = NO_LOCK; 9032 do { 9033 rc = ctrl_lock_status(demod, lock_status); 9034 if (rc != 0) { 9035 pr_err("error %d\n", rc); 9036 goto rw_error; 9037 } 9038 switch (lck_state) { 9039 case NO_LOCK: 9040 if (*lock_status == DRXJ_DEMOD_LOCK) { 9041 rc = ctrl_get_qam_sig_quality(demod); 9042 if (rc != 0) { 9043 pr_err("error %d\n", rc); 9044 goto rw_error; 9045 } 9046 if (p->cnr.stat[0].svalue > 26800) { 9047 lck_state = DEMOD_LOCKED; 9048 timeout_ofs += DRXJ_QAM_DEMOD_LOCK_EXT_WAITTIME; /* see something, wait longer */ 9049 d_locked_time = jiffies_to_msecs(jiffies); 9050 } 9051 } 9052 break; 9053 case DEMOD_LOCKED: 9054 if (*lock_status == DRXJ_DEMOD_LOCK) { 9055 if ((channel->mirror == DRX_MIRROR_AUTO) && 9056 ((jiffies_to_msecs(jiffies) - d_locked_time) > 9057 DRXJ_QAM_FEC_LOCK_WAITTIME)) { 9058 ext_attr->mirror = DRX_MIRROR_YES; 9059 rc = qam_flip_spec(demod, channel); 9060 if (rc != 0) { 9061 pr_err("error %d\n", rc); 9062 goto rw_error; 9063 } 9064 lck_state = SPEC_MIRRORED; 9065 /* reset timer TODO: still need 300ms? */ 9066 start_time = jiffies_to_msecs(jiffies); 9067 timeout_ofs = -DRXJ_QAM_MAX_WAITTIME / 2; 9068 } 9069 } 9070 break; 9071 case SPEC_MIRRORED: 9072 break; 9073 default: 9074 break; 9075 } 9076 msleep(10); 9077 } while 9078 ((*lock_status < DRX_LOCKED) && 9079 (*lock_status != DRX_NEVER_LOCK) && 9080 ((jiffies_to_msecs(jiffies) - start_time) < 9081 (DRXJ_QAM_MAX_WAITTIME + timeout_ofs))); 9082 9083 return 0; 9084 rw_error: 9085 return rc; 9086 } 9087 9088 /* 9089 * \fn int set_qam_channel () 9090 * \brief Set QAM channel according to the requested constellation. 9091 * \param demod: instance of demod. 9092 * \param channel: pointer to channel data. 9093 * \return int. 9094 */ 9095 static int 9096 set_qam_channel(struct drx_demod_instance *demod, 9097 struct drx_channel *channel, s32 tuner_freq_offset) 9098 { 9099 struct drxj_data *ext_attr = NULL; 9100 int rc; 9101 enum drx_lock_status lock_status = DRX_NOT_LOCKED; 9102 bool auto_flag = false; 9103 9104 /* external attributes for storing acquired channel constellation */ 9105 ext_attr = (struct drxj_data *) demod->my_ext_attr; 9106 9107 /* set QAM channel constellation */ 9108 switch (channel->constellation) { 9109 case DRX_CONSTELLATION_QAM16: 9110 case DRX_CONSTELLATION_QAM32: 9111 case DRX_CONSTELLATION_QAM128: 9112 return -EINVAL; 9113 case DRX_CONSTELLATION_QAM64: 9114 case DRX_CONSTELLATION_QAM256: 9115 if (ext_attr->standard != DRX_STANDARD_ITU_B) 9116 return -EINVAL; 9117 9118 ext_attr->constellation = channel->constellation; 9119 if (channel->mirror == DRX_MIRROR_AUTO) 9120 ext_attr->mirror = DRX_MIRROR_NO; 9121 else 9122 ext_attr->mirror = channel->mirror; 9123 9124 rc = set_qam(demod, channel, tuner_freq_offset, QAM_SET_OP_ALL); 9125 if (rc != 0) { 9126 pr_err("error %d\n", rc); 9127 goto rw_error; 9128 } 9129 9130 if (channel->constellation == DRX_CONSTELLATION_QAM64) 9131 rc = qam64auto(demod, channel, tuner_freq_offset, 9132 &lock_status); 9133 else 9134 rc = qam256auto(demod, channel, tuner_freq_offset, 9135 &lock_status); 9136 if (rc != 0) { 9137 pr_err("error %d\n", rc); 9138 goto rw_error; 9139 } 9140 break; 9141 case DRX_CONSTELLATION_AUTO: /* for channel scan */ 9142 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 9143 u16 qam_ctl_ena = 0; 9144 9145 auto_flag = true; 9146 9147 /* try to lock default QAM constellation: QAM256 */ 9148 channel->constellation = DRX_CONSTELLATION_QAM256; 9149 ext_attr->constellation = DRX_CONSTELLATION_QAM256; 9150 if (channel->mirror == DRX_MIRROR_AUTO) 9151 ext_attr->mirror = DRX_MIRROR_NO; 9152 else 9153 ext_attr->mirror = channel->mirror; 9154 rc = set_qam(demod, channel, tuner_freq_offset, 9155 QAM_SET_OP_ALL); 9156 if (rc != 0) { 9157 pr_err("error %d\n", rc); 9158 goto rw_error; 9159 } 9160 rc = qam256auto(demod, channel, tuner_freq_offset, 9161 &lock_status); 9162 if (rc != 0) { 9163 pr_err("error %d\n", rc); 9164 goto rw_error; 9165 } 9166 9167 if (lock_status >= DRX_LOCKED) { 9168 channel->constellation = DRX_CONSTELLATION_AUTO; 9169 break; 9170 } 9171 9172 /* QAM254 not locked. Try QAM64 constellation */ 9173 channel->constellation = DRX_CONSTELLATION_QAM64; 9174 ext_attr->constellation = DRX_CONSTELLATION_QAM64; 9175 if (channel->mirror == DRX_MIRROR_AUTO) 9176 ext_attr->mirror = DRX_MIRROR_NO; 9177 else 9178 ext_attr->mirror = channel->mirror; 9179 9180 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, 9181 SCU_RAM_QAM_CTL_ENA__A, 9182 &qam_ctl_ena, 0); 9183 if (rc != 0) { 9184 pr_err("error %d\n", rc); 9185 goto rw_error; 9186 } 9187 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9188 SCU_RAM_QAM_CTL_ENA__A, 9189 qam_ctl_ena & ~SCU_RAM_QAM_CTL_ENA_ACQ__M, 0); 9190 if (rc != 0) { 9191 pr_err("error %d\n", rc); 9192 goto rw_error; 9193 } 9194 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9195 SCU_RAM_QAM_FSM_STATE_TGT__A, 9196 0x2, 0); 9197 if (rc != 0) { 9198 pr_err("error %d\n", rc); 9199 goto rw_error; 9200 } /* force to rate hunting */ 9201 9202 rc = set_qam(demod, channel, tuner_freq_offset, 9203 QAM_SET_OP_CONSTELLATION); 9204 if (rc != 0) { 9205 pr_err("error %d\n", rc); 9206 goto rw_error; 9207 } 9208 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9209 SCU_RAM_QAM_CTL_ENA__A, 9210 qam_ctl_ena, 0); 9211 if (rc != 0) { 9212 pr_err("error %d\n", rc); 9213 goto rw_error; 9214 } 9215 9216 rc = qam64auto(demod, channel, tuner_freq_offset, 9217 &lock_status); 9218 if (rc != 0) { 9219 pr_err("error %d\n", rc); 9220 goto rw_error; 9221 } 9222 9223 channel->constellation = DRX_CONSTELLATION_AUTO; 9224 } else if (ext_attr->standard == DRX_STANDARD_ITU_C) { 9225 u16 qam_ctl_ena = 0; 9226 9227 channel->constellation = DRX_CONSTELLATION_QAM64; 9228 ext_attr->constellation = DRX_CONSTELLATION_QAM64; 9229 auto_flag = true; 9230 9231 if (channel->mirror == DRX_MIRROR_AUTO) 9232 ext_attr->mirror = DRX_MIRROR_NO; 9233 else 9234 ext_attr->mirror = channel->mirror; 9235 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, 9236 SCU_RAM_QAM_CTL_ENA__A, 9237 &qam_ctl_ena, 0); 9238 if (rc != 0) { 9239 pr_err("error %d\n", rc); 9240 goto rw_error; 9241 } 9242 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9243 SCU_RAM_QAM_CTL_ENA__A, 9244 qam_ctl_ena & ~SCU_RAM_QAM_CTL_ENA_ACQ__M, 0); 9245 if (rc != 0) { 9246 pr_err("error %d\n", rc); 9247 goto rw_error; 9248 } 9249 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9250 SCU_RAM_QAM_FSM_STATE_TGT__A, 9251 0x2, 0); 9252 if (rc != 0) { 9253 pr_err("error %d\n", rc); 9254 goto rw_error; 9255 } /* force to rate hunting */ 9256 9257 rc = set_qam(demod, channel, tuner_freq_offset, 9258 QAM_SET_OP_CONSTELLATION); 9259 if (rc != 0) { 9260 pr_err("error %d\n", rc); 9261 goto rw_error; 9262 } 9263 rc = drxj_dap_write_reg16(demod->my_i2c_dev_addr, 9264 SCU_RAM_QAM_CTL_ENA__A, 9265 qam_ctl_ena, 0); 9266 if (rc != 0) { 9267 pr_err("error %d\n", rc); 9268 goto rw_error; 9269 } 9270 rc = qam64auto(demod, channel, tuner_freq_offset, 9271 &lock_status); 9272 if (rc != 0) { 9273 pr_err("error %d\n", rc); 9274 goto rw_error; 9275 } 9276 channel->constellation = DRX_CONSTELLATION_AUTO; 9277 } else { 9278 return -EINVAL; 9279 } 9280 break; 9281 default: 9282 return -EINVAL; 9283 } 9284 9285 return 0; 9286 rw_error: 9287 /* restore starting value */ 9288 if (auto_flag) 9289 channel->constellation = DRX_CONSTELLATION_AUTO; 9290 return rc; 9291 } 9292 9293 /*============================================================================*/ 9294 9295 /* 9296 * \fn static short get_qamrs_err_count(struct i2c_device_addr *dev_addr) 9297 * \brief Get RS error count in QAM mode (used for post RS BER calculation) 9298 * \return Error code 9299 * 9300 * precondition: measurement period & measurement prescale must be set 9301 * 9302 */ 9303 static int 9304 get_qamrs_err_count(struct i2c_device_addr *dev_addr, 9305 struct drxjrs_errors *rs_errors) 9306 { 9307 int rc; 9308 u16 nr_bit_errors = 0, 9309 nr_symbol_errors = 0, 9310 nr_packet_errors = 0, nr_failures = 0, nr_snc_par_fail_count = 0; 9311 9312 /* check arguments */ 9313 if (dev_addr == NULL) 9314 return -EINVAL; 9315 9316 /* all reported errors are received in the */ 9317 /* most recently finished measurement period */ 9318 /* no of pre RS bit errors */ 9319 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_BIT_ERRORS__A, &nr_bit_errors, 0); 9320 if (rc != 0) { 9321 pr_err("error %d\n", rc); 9322 goto rw_error; 9323 } 9324 /* no of symbol errors */ 9325 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_SYMBOL_ERRORS__A, &nr_symbol_errors, 0); 9326 if (rc != 0) { 9327 pr_err("error %d\n", rc); 9328 goto rw_error; 9329 } 9330 /* no of packet errors */ 9331 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_PACKET_ERRORS__A, &nr_packet_errors, 0); 9332 if (rc != 0) { 9333 pr_err("error %d\n", rc); 9334 goto rw_error; 9335 } 9336 /* no of failures to decode */ 9337 rc = drxj_dap_read_reg16(dev_addr, FEC_RS_NR_FAILURES__A, &nr_failures, 0); 9338 if (rc != 0) { 9339 pr_err("error %d\n", rc); 9340 goto rw_error; 9341 } 9342 /* no of post RS bit erros */ 9343 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_FAIL_COUNT__A, &nr_snc_par_fail_count, 0); 9344 if (rc != 0) { 9345 pr_err("error %d\n", rc); 9346 goto rw_error; 9347 } 9348 /* TODO: NOTE */ 9349 /* These register values are fetched in non-atomic fashion */ 9350 /* It is possible that the read values contain unrelated information */ 9351 9352 rs_errors->nr_bit_errors = nr_bit_errors & FEC_RS_NR_BIT_ERRORS__M; 9353 rs_errors->nr_symbol_errors = nr_symbol_errors & FEC_RS_NR_SYMBOL_ERRORS__M; 9354 rs_errors->nr_packet_errors = nr_packet_errors & FEC_RS_NR_PACKET_ERRORS__M; 9355 rs_errors->nr_failures = nr_failures & FEC_RS_NR_FAILURES__M; 9356 rs_errors->nr_snc_par_fail_count = 9357 nr_snc_par_fail_count & FEC_OC_SNC_FAIL_COUNT__M; 9358 9359 return 0; 9360 rw_error: 9361 return rc; 9362 } 9363 9364 /*============================================================================*/ 9365 9366 /* 9367 * \fn int get_sig_strength() 9368 * \brief Retrieve signal strength for VSB and QAM. 9369 * \param demod Pointer to demod instance 9370 * \param u16-t Pointer to signal strength data; range 0, .. , 100. 9371 * \return int. 9372 * \retval 0 sig_strength contains valid data. 9373 * \retval -EINVAL sig_strength is NULL. 9374 * \retval -EIO Erroneous data, sig_strength contains invalid data. 9375 */ 9376 #define DRXJ_AGC_TOP 0x2800 9377 #define DRXJ_AGC_SNS 0x1600 9378 #define DRXJ_RFAGC_MAX 0x3fff 9379 #define DRXJ_RFAGC_MIN 0x800 9380 9381 static int get_sig_strength(struct drx_demod_instance *demod, u16 *sig_strength) 9382 { 9383 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9384 int rc; 9385 u16 rf_gain = 0; 9386 u16 if_gain = 0; 9387 u16 if_agc_sns = 0; 9388 u16 if_agc_top = 0; 9389 u16 rf_agc_max = 0; 9390 u16 rf_agc_min = 0; 9391 9392 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_AGC_IF__A, &if_gain, 0); 9393 if (rc != 0) { 9394 pr_err("error %d\n", rc); 9395 goto rw_error; 9396 } 9397 if_gain &= IQM_AF_AGC_IF__M; 9398 rc = drxj_dap_read_reg16(dev_addr, IQM_AF_AGC_RF__A, &rf_gain, 0); 9399 if (rc != 0) { 9400 pr_err("error %d\n", rc); 9401 goto rw_error; 9402 } 9403 rf_gain &= IQM_AF_AGC_RF__M; 9404 9405 if_agc_sns = DRXJ_AGC_SNS; 9406 if_agc_top = DRXJ_AGC_TOP; 9407 rf_agc_max = DRXJ_RFAGC_MAX; 9408 rf_agc_min = DRXJ_RFAGC_MIN; 9409 9410 if (if_gain > if_agc_top) { 9411 if (rf_gain > rf_agc_max) 9412 *sig_strength = 100; 9413 else if (rf_gain > rf_agc_min) { 9414 if (rf_agc_max == rf_agc_min) { 9415 pr_err("error: rf_agc_max == rf_agc_min\n"); 9416 return -EIO; 9417 } 9418 *sig_strength = 9419 75 + 25 * (rf_gain - rf_agc_min) / (rf_agc_max - 9420 rf_agc_min); 9421 } else 9422 *sig_strength = 75; 9423 } else if (if_gain > if_agc_sns) { 9424 if (if_agc_top == if_agc_sns) { 9425 pr_err("error: if_agc_top == if_agc_sns\n"); 9426 return -EIO; 9427 } 9428 *sig_strength = 9429 20 + 55 * (if_gain - if_agc_sns) / (if_agc_top - if_agc_sns); 9430 } else { 9431 if (!if_agc_sns) { 9432 pr_err("error: if_agc_sns is zero!\n"); 9433 return -EIO; 9434 } 9435 *sig_strength = (20 * if_gain / if_agc_sns); 9436 } 9437 9438 if (*sig_strength <= 7) 9439 *sig_strength = 0; 9440 9441 return 0; 9442 rw_error: 9443 return rc; 9444 } 9445 9446 /* 9447 * \fn int ctrl_get_qam_sig_quality() 9448 * \brief Retrieve QAM signal quality from device. 9449 * \param devmod Pointer to demodulator instance. 9450 * \param sig_quality Pointer to signal quality data. 9451 * \return int. 9452 * \retval 0 sig_quality contains valid data. 9453 * \retval -EINVAL sig_quality is NULL. 9454 * \retval -EIO Erroneous data, sig_quality contains invalid data. 9455 9456 * Pre-condition: Device must be started and in lock. 9457 */ 9458 static int 9459 ctrl_get_qam_sig_quality(struct drx_demod_instance *demod) 9460 { 9461 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9462 struct drxj_data *ext_attr = demod->my_ext_attr; 9463 struct drx39xxj_state *state = dev_addr->user_data; 9464 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 9465 struct drxjrs_errors measuredrs_errors = { 0, 0, 0, 0, 0 }; 9466 enum drx_modulation constellation = ext_attr->constellation; 9467 int rc; 9468 9469 u32 pre_bit_err_rs = 0; /* pre RedSolomon Bit Error Rate */ 9470 u32 post_bit_err_rs = 0; /* post RedSolomon Bit Error Rate */ 9471 u32 pkt_errs = 0; /* no of packet errors in RS */ 9472 u16 qam_sl_err_power = 0; /* accumulated error between raw and sliced symbols */ 9473 u16 qsym_err_vd = 0; /* quadrature symbol errors in QAM_VD */ 9474 u16 fec_oc_period = 0; /* SNC sync failure measurement period */ 9475 u16 fec_rs_prescale = 0; /* ReedSolomon Measurement Prescale */ 9476 u16 fec_rs_period = 0; /* Value for corresponding I2C register */ 9477 /* calculation constants */ 9478 u32 rs_bit_cnt = 0; /* RedSolomon Bit Count */ 9479 u32 qam_sl_sig_power = 0; /* used for MER, depends of QAM constellation */ 9480 /* intermediate results */ 9481 u32 e = 0; /* exponent value used for QAM BER/SER */ 9482 u32 m = 0; /* mantisa value used for QAM BER/SER */ 9483 u32 ber_cnt = 0; /* BER count */ 9484 /* signal quality info */ 9485 u32 qam_sl_mer = 0; /* QAM MER */ 9486 u32 qam_pre_rs_ber = 0; /* Pre RedSolomon BER */ 9487 u32 qam_post_rs_ber = 0; /* Post RedSolomon BER */ 9488 u32 qam_vd_ser = 0; /* ViterbiDecoder SER */ 9489 u16 qam_vd_prescale = 0; /* Viterbi Measurement Prescale */ 9490 u16 qam_vd_period = 0; /* Viterbi Measurement period */ 9491 u32 vd_bit_cnt = 0; /* ViterbiDecoder Bit Count */ 9492 9493 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9494 9495 /* read the physical registers */ 9496 /* Get the RS error data */ 9497 rc = get_qamrs_err_count(dev_addr, &measuredrs_errors); 9498 if (rc != 0) { 9499 pr_err("error %d\n", rc); 9500 goto rw_error; 9501 } 9502 /* get the register value needed for MER */ 9503 rc = drxj_dap_read_reg16(dev_addr, QAM_SL_ERR_POWER__A, &qam_sl_err_power, 0); 9504 if (rc != 0) { 9505 pr_err("error %d\n", rc); 9506 goto rw_error; 9507 } 9508 /* get the register value needed for post RS BER */ 9509 rc = drxj_dap_read_reg16(dev_addr, FEC_OC_SNC_FAIL_PERIOD__A, &fec_oc_period, 0); 9510 if (rc != 0) { 9511 pr_err("error %d\n", rc); 9512 goto rw_error; 9513 } 9514 9515 /* get constants needed for signal quality calculation */ 9516 fec_rs_period = ext_attr->fec_rs_period; 9517 fec_rs_prescale = ext_attr->fec_rs_prescale; 9518 rs_bit_cnt = fec_rs_period * fec_rs_prescale * ext_attr->fec_rs_plen; 9519 qam_vd_period = ext_attr->qam_vd_period; 9520 qam_vd_prescale = ext_attr->qam_vd_prescale; 9521 vd_bit_cnt = qam_vd_period * qam_vd_prescale * ext_attr->fec_vd_plen; 9522 9523 /* DRXJ_QAM_SL_SIG_POWER_QAMxxx * 4 */ 9524 switch (constellation) { 9525 case DRX_CONSTELLATION_QAM16: 9526 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM16 << 2; 9527 break; 9528 case DRX_CONSTELLATION_QAM32: 9529 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM32 << 2; 9530 break; 9531 case DRX_CONSTELLATION_QAM64: 9532 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM64 << 2; 9533 break; 9534 case DRX_CONSTELLATION_QAM128: 9535 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM128 << 2; 9536 break; 9537 case DRX_CONSTELLATION_QAM256: 9538 qam_sl_sig_power = DRXJ_QAM_SL_SIG_POWER_QAM256 << 2; 9539 break; 9540 default: 9541 return -EIO; 9542 } 9543 9544 /* ------------------------------ */ 9545 /* MER Calculation */ 9546 /* ------------------------------ */ 9547 /* MER is good if it is above 27.5 for QAM256 or 21.5 for QAM64 */ 9548 9549 /* 10.0*log10(qam_sl_sig_power * 4.0 / qam_sl_err_power); */ 9550 if (qam_sl_err_power == 0) 9551 qam_sl_mer = 0; 9552 else 9553 qam_sl_mer = log1_times100(qam_sl_sig_power) - log1_times100((u32)qam_sl_err_power); 9554 9555 /* ----------------------------------------- */ 9556 /* Pre Viterbi Symbol Error Rate Calculation */ 9557 /* ----------------------------------------- */ 9558 /* pre viterbi SER is good if it is below 0.025 */ 9559 9560 /* get the register value */ 9561 /* no of quadrature symbol errors */ 9562 rc = drxj_dap_read_reg16(dev_addr, QAM_VD_NR_QSYM_ERRORS__A, &qsym_err_vd, 0); 9563 if (rc != 0) { 9564 pr_err("error %d\n", rc); 9565 goto rw_error; 9566 } 9567 /* Extract the Exponent and the Mantisa */ 9568 /* of number of quadrature symbol errors */ 9569 e = (qsym_err_vd & QAM_VD_NR_QSYM_ERRORS_EXP__M) >> 9570 QAM_VD_NR_QSYM_ERRORS_EXP__B; 9571 m = (qsym_err_vd & QAM_VD_NR_SYMBOL_ERRORS_FIXED_MANT__M) >> 9572 QAM_VD_NR_SYMBOL_ERRORS_FIXED_MANT__B; 9573 9574 if ((m << e) >> 3 > 549752) 9575 qam_vd_ser = 500000 * vd_bit_cnt * ((e > 2) ? 1 : 8) / 8; 9576 else 9577 qam_vd_ser = m << ((e > 2) ? (e - 3) : e); 9578 9579 /* --------------------------------------- */ 9580 /* pre and post RedSolomon BER Calculation */ 9581 /* --------------------------------------- */ 9582 /* pre RS BER is good if it is below 3.5e-4 */ 9583 9584 /* get the register values */ 9585 pre_bit_err_rs = (u32) measuredrs_errors.nr_bit_errors; 9586 pkt_errs = post_bit_err_rs = (u32) measuredrs_errors.nr_snc_par_fail_count; 9587 9588 /* Extract the Exponent and the Mantisa of the */ 9589 /* pre Reed-Solomon bit error count */ 9590 e = (pre_bit_err_rs & FEC_RS_NR_BIT_ERRORS_EXP__M) >> 9591 FEC_RS_NR_BIT_ERRORS_EXP__B; 9592 m = (pre_bit_err_rs & FEC_RS_NR_BIT_ERRORS_FIXED_MANT__M) >> 9593 FEC_RS_NR_BIT_ERRORS_FIXED_MANT__B; 9594 9595 ber_cnt = m << e; 9596 9597 /*qam_pre_rs_ber = frac_times1e6( ber_cnt, rs_bit_cnt ); */ 9598 if (m > (rs_bit_cnt >> (e + 1)) || (rs_bit_cnt >> e) == 0) 9599 qam_pre_rs_ber = 500000 * rs_bit_cnt >> e; 9600 else 9601 qam_pre_rs_ber = ber_cnt; 9602 9603 /* post RS BER = 1000000* (11.17 * FEC_OC_SNC_FAIL_COUNT__A) / */ 9604 /* (1504.0 * FEC_OC_SNC_FAIL_PERIOD__A) */ 9605 /* 9606 => c = (1000000*100*11.17)/1504 = 9607 post RS BER = (( c* FEC_OC_SNC_FAIL_COUNT__A) / 9608 (100 * FEC_OC_SNC_FAIL_PERIOD__A) 9609 *100 and /100 is for more precision. 9610 => (20 bits * 12 bits) /(16 bits * 7 bits) => safe in 32 bits computation 9611 9612 Precision errors still possible. 9613 */ 9614 if (!fec_oc_period) { 9615 qam_post_rs_ber = 0xFFFFFFFF; 9616 } else { 9617 e = post_bit_err_rs * 742686; 9618 m = fec_oc_period * 100; 9619 qam_post_rs_ber = e / m; 9620 } 9621 9622 /* fill signal quality data structure */ 9623 p->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; 9624 p->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; 9625 p->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; 9626 p->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; 9627 p->block_error.stat[0].scale = FE_SCALE_COUNTER; 9628 p->cnr.stat[0].scale = FE_SCALE_DECIBEL; 9629 9630 p->cnr.stat[0].svalue = ((u16) qam_sl_mer) * 100; 9631 if (ext_attr->standard == DRX_STANDARD_ITU_B) { 9632 p->pre_bit_error.stat[0].uvalue += qam_vd_ser; 9633 p->pre_bit_count.stat[0].uvalue += vd_bit_cnt * ((e > 2) ? 1 : 8) / 8; 9634 } else { 9635 p->pre_bit_error.stat[0].uvalue += qam_pre_rs_ber; 9636 p->pre_bit_count.stat[0].uvalue += rs_bit_cnt >> e; 9637 } 9638 9639 p->post_bit_error.stat[0].uvalue += qam_post_rs_ber; 9640 p->post_bit_count.stat[0].uvalue += rs_bit_cnt >> e; 9641 9642 p->block_error.stat[0].uvalue += pkt_errs; 9643 9644 #ifdef DRXJ_SIGNAL_ACCUM_ERR 9645 rc = get_acc_pkt_err(demod, &sig_quality->packet_error); 9646 if (rc != 0) { 9647 pr_err("error %d\n", rc); 9648 goto rw_error; 9649 } 9650 #endif 9651 9652 return 0; 9653 rw_error: 9654 p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9655 p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9656 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9657 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9658 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9659 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 9660 9661 return rc; 9662 } 9663 9664 #endif /* #ifndef DRXJ_VSB_ONLY */ 9665 9666 /*============================================================================*/ 9667 /*== END QAM DATAPATH FUNCTIONS ==*/ 9668 /*============================================================================*/ 9669 9670 /*============================================================================*/ 9671 /*============================================================================*/ 9672 /*== ATV DATAPATH FUNCTIONS ==*/ 9673 /*============================================================================*/ 9674 /*============================================================================*/ 9675 9676 /* 9677 Implementation notes. 9678 9679 NTSC/FM AGCs 9680 9681 Four AGCs are used for NTSC: 9682 (1) RF (used to attenuate the input signal in case of to much power) 9683 (2) IF (used to attenuate the input signal in case of to much power) 9684 (3) Video AGC (used to amplify the output signal in case input to low) 9685 (4) SIF AGC (used to amplify the output signal in case input to low) 9686 9687 Video AGC is coupled to RF and IF. SIF AGC is not coupled. It is assumed 9688 that the coupling between Video AGC and the RF and IF AGCs also works in 9689 favor of the SIF AGC. 9690 9691 Three AGCs are used for FM: 9692 (1) RF (used to attenuate the input signal in case of to much power) 9693 (2) IF (used to attenuate the input signal in case of to much power) 9694 (3) SIF AGC (used to amplify the output signal in case input to low) 9695 9696 The SIF AGC is now coupled to the RF/IF AGCs. 9697 The SIF AGC is needed for both SIF output and the internal SIF signal to 9698 the AUD block. 9699 9700 RF and IF AGCs DACs are part of AFE, Video and SIF AGC DACs are part of 9701 the ATV block. The AGC control algorithms are all implemented in 9702 microcode. 9703 9704 ATV SETTINGS 9705 9706 (Shadow settings will not be used for now, they will be implemented 9707 later on because of the schedule) 9708 9709 Several HW/SCU "settings" can be used for ATV. The standard selection 9710 will reset most of these settings. To avoid that the end user application 9711 has to perform these settings each time the ATV or FM standards is 9712 selected the driver will shadow these settings. This enables the end user 9713 to perform the settings only once after a drx_open(). The driver must 9714 write the shadow settings to HW/SCU in case: 9715 ( setstandard FM/ATV) || 9716 ( settings have changed && FM/ATV standard is active) 9717 The shadow settings will be stored in the device specific data container. 9718 A set of flags will be defined to flag changes in shadow settings. 9719 A routine will be implemented to write all changed shadow settings to 9720 HW/SCU. 9721 9722 The "settings" will consist of: AGC settings, filter settings etc. 9723 9724 Disadvantage of use of shadow settings: 9725 Direct changes in HW/SCU registers will not be reflected in the 9726 shadow settings and these changes will be overwritten during a next 9727 update. This can happen during evaluation. This will not be a problem 9728 for normal customer usage. 9729 */ 9730 /* -------------------------------------------------------------------------- */ 9731 9732 /* 9733 * \fn int power_down_atv () 9734 * \brief Power down ATV. 9735 * \param demod instance of demodulator 9736 * \param standard either NTSC or FM (sub strandard for ATV ) 9737 * \return int. 9738 * 9739 * Stops and thus resets ATV and IQM block 9740 * SIF and CVBS ADC are powered down 9741 * Calls audio power down 9742 */ 9743 static int 9744 power_down_atv(struct drx_demod_instance *demod, enum drx_standard standard, bool primary) 9745 { 9746 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9747 struct drxjscu_cmd cmd_scu = { /* command */ 0, 9748 /* parameter_len */ 0, 9749 /* result_len */ 0, 9750 /* *parameter */ NULL, 9751 /* *result */ NULL 9752 }; 9753 int rc; 9754 u16 cmd_result = 0; 9755 9756 /* ATV NTSC */ 9757 9758 /* Stop ATV SCU (will reset ATV and IQM hardware */ 9759 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_ATV | 9760 SCU_RAM_COMMAND_CMD_DEMOD_STOP; 9761 cmd_scu.parameter_len = 0; 9762 cmd_scu.result_len = 1; 9763 cmd_scu.parameter = NULL; 9764 cmd_scu.result = &cmd_result; 9765 rc = scu_command(dev_addr, &cmd_scu); 9766 if (rc != 0) { 9767 pr_err("error %d\n", rc); 9768 goto rw_error; 9769 } 9770 /* Disable ATV outputs (ATV reset enables CVBS, undo this) */ 9771 rc = drxj_dap_write_reg16(dev_addr, ATV_TOP_STDBY__A, (ATV_TOP_STDBY_SIF_STDBY_STANDBY & (~ATV_TOP_STDBY_CVBS_STDBY_A2_ACTIVE)), 0); 9772 if (rc != 0) { 9773 pr_err("error %d\n", rc); 9774 goto rw_error; 9775 } 9776 9777 rc = drxj_dap_write_reg16(dev_addr, ATV_COMM_EXEC__A, ATV_COMM_EXEC_STOP, 0); 9778 if (rc != 0) { 9779 pr_err("error %d\n", rc); 9780 goto rw_error; 9781 } 9782 if (primary) { 9783 rc = drxj_dap_write_reg16(dev_addr, IQM_COMM_EXEC__A, IQM_COMM_EXEC_STOP, 0); 9784 if (rc != 0) { 9785 pr_err("error %d\n", rc); 9786 goto rw_error; 9787 } 9788 rc = set_iqm_af(demod, false); 9789 if (rc != 0) { 9790 pr_err("error %d\n", rc); 9791 goto rw_error; 9792 } 9793 } else { 9794 rc = drxj_dap_write_reg16(dev_addr, IQM_FS_COMM_EXEC__A, IQM_FS_COMM_EXEC_STOP, 0); 9795 if (rc != 0) { 9796 pr_err("error %d\n", rc); 9797 goto rw_error; 9798 } 9799 rc = drxj_dap_write_reg16(dev_addr, IQM_FD_COMM_EXEC__A, IQM_FD_COMM_EXEC_STOP, 0); 9800 if (rc != 0) { 9801 pr_err("error %d\n", rc); 9802 goto rw_error; 9803 } 9804 rc = drxj_dap_write_reg16(dev_addr, IQM_RC_COMM_EXEC__A, IQM_RC_COMM_EXEC_STOP, 0); 9805 if (rc != 0) { 9806 pr_err("error %d\n", rc); 9807 goto rw_error; 9808 } 9809 rc = drxj_dap_write_reg16(dev_addr, IQM_RT_COMM_EXEC__A, IQM_RT_COMM_EXEC_STOP, 0); 9810 if (rc != 0) { 9811 pr_err("error %d\n", rc); 9812 goto rw_error; 9813 } 9814 rc = drxj_dap_write_reg16(dev_addr, IQM_CF_COMM_EXEC__A, IQM_CF_COMM_EXEC_STOP, 0); 9815 if (rc != 0) { 9816 pr_err("error %d\n", rc); 9817 goto rw_error; 9818 } 9819 } 9820 rc = power_down_aud(demod); 9821 if (rc != 0) { 9822 pr_err("error %d\n", rc); 9823 goto rw_error; 9824 } 9825 9826 return 0; 9827 rw_error: 9828 return rc; 9829 } 9830 9831 /*============================================================================*/ 9832 9833 /* 9834 * \brief Power up AUD. 9835 * \param demod instance of demodulator 9836 * \return int. 9837 * 9838 */ 9839 static int power_down_aud(struct drx_demod_instance *demod) 9840 { 9841 struct i2c_device_addr *dev_addr = NULL; 9842 struct drxj_data *ext_attr = NULL; 9843 int rc; 9844 9845 dev_addr = (struct i2c_device_addr *)demod->my_i2c_dev_addr; 9846 ext_attr = (struct drxj_data *) demod->my_ext_attr; 9847 9848 rc = drxj_dap_write_reg16(dev_addr, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP, 0); 9849 if (rc != 0) { 9850 pr_err("error %d\n", rc); 9851 goto rw_error; 9852 } 9853 9854 ext_attr->aud_data.audio_is_active = false; 9855 9856 return 0; 9857 rw_error: 9858 return rc; 9859 } 9860 9861 /* 9862 * \fn int set_orx_nsu_aox() 9863 * \brief Configure OrxNsuAox for OOB 9864 * \param demod instance of demodulator. 9865 * \param active 9866 * \return int. 9867 */ 9868 static int set_orx_nsu_aox(struct drx_demod_instance *demod, bool active) 9869 { 9870 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 9871 int rc; 9872 u16 data = 0; 9873 9874 /* Configure NSU_AOX */ 9875 rc = drxj_dap_read_reg16(dev_addr, ORX_NSU_AOX_STDBY_W__A, &data, 0); 9876 if (rc != 0) { 9877 pr_err("error %d\n", rc); 9878 goto rw_error; 9879 } 9880 if (!active) 9881 data &= ((~ORX_NSU_AOX_STDBY_W_STDBYADC_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYAMP_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYBIAS_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYPLL_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYPD_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYTAGC_IF_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYTAGC_RF_A2_ON) & (~ORX_NSU_AOX_STDBY_W_STDBYFLT_A2_ON)); 9882 else 9883 data |= (ORX_NSU_AOX_STDBY_W_STDBYADC_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYAMP_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYBIAS_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYPLL_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYPD_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYTAGC_IF_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYTAGC_RF_A2_ON | ORX_NSU_AOX_STDBY_W_STDBYFLT_A2_ON); 9884 rc = drxj_dap_write_reg16(dev_addr, ORX_NSU_AOX_STDBY_W__A, data, 0); 9885 if (rc != 0) { 9886 pr_err("error %d\n", rc); 9887 goto rw_error; 9888 } 9889 9890 return 0; 9891 rw_error: 9892 return rc; 9893 } 9894 9895 /* 9896 * \fn int ctrl_set_oob() 9897 * \brief Set OOB channel to be used. 9898 * \param demod instance of demodulator 9899 * \param oob_param OOB parameters for channel setting. 9900 * \frequency should be in KHz 9901 * \return int. 9902 * 9903 * Accepts only. Returns error otherwise. 9904 * Demapper value is written after scu_command START 9905 * because START command causes COMM_EXEC transition 9906 * from 0 to 1 which causes all registers to be 9907 * overwritten with initial value 9908 * 9909 */ 9910 9911 /* Nyquist filter impulse response */ 9912 #define IMPULSE_COSINE_ALPHA_0_3 {-3, -4, -1, 6, 10, 7, -5, -20, -25, -10, 29, 79, 123, 140} /*sqrt raised-cosine filter with alpha=0.3 */ 9913 #define IMPULSE_COSINE_ALPHA_0_5 { 2, 0, -2, -2, 2, 5, 2, -10, -20, -14, 20, 74, 125, 145} /*sqrt raised-cosine filter with alpha=0.5 */ 9914 #define IMPULSE_COSINE_ALPHA_RO_0_5 { 0, 0, 1, 2, 3, 0, -7, -15, -16, 0, 34, 77, 114, 128} /*full raised-cosine filter with alpha=0.5 (receiver only) */ 9915 9916 /* Coefficients for the nyquist filter (total: 27 taps) */ 9917 #define NYQFILTERLEN 27 9918 9919 static int ctrl_set_oob(struct drx_demod_instance *demod, struct drxoob *oob_param) 9920 { 9921 int rc; 9922 s32 freq = 0; /* KHz */ 9923 struct i2c_device_addr *dev_addr = NULL; 9924 struct drxj_data *ext_attr = NULL; 9925 u16 i = 0; 9926 bool mirror_freq_spect_oob = false; 9927 u16 trk_filter_value = 0; 9928 struct drxjscu_cmd scu_cmd; 9929 u16 set_param_parameters[3]; 9930 u16 cmd_result[2] = { 0, 0 }; 9931 s16 nyquist_coeffs[4][(NYQFILTERLEN + 1) / 2] = { 9932 IMPULSE_COSINE_ALPHA_0_3, /* Target Mode 0 */ 9933 IMPULSE_COSINE_ALPHA_0_3, /* Target Mode 1 */ 9934 IMPULSE_COSINE_ALPHA_0_5, /* Target Mode 2 */ 9935 IMPULSE_COSINE_ALPHA_RO_0_5 /* Target Mode 3 */ 9936 }; 9937 u8 mode_val[4] = { 2, 2, 0, 1 }; 9938 u8 pfi_coeffs[4][6] = { 9939 {DRXJ_16TO8(-92), DRXJ_16TO8(-108), DRXJ_16TO8(100)}, /* TARGET_MODE = 0: PFI_A = -23/32; PFI_B = -54/32; PFI_C = 25/32; fg = 0.5 MHz (Att=26dB) */ 9940 {DRXJ_16TO8(-64), DRXJ_16TO8(-80), DRXJ_16TO8(80)}, /* TARGET_MODE = 1: PFI_A = -16/32; PFI_B = -40/32; PFI_C = 20/32; fg = 1.0 MHz (Att=28dB) */ 9941 {DRXJ_16TO8(-80), DRXJ_16TO8(-98), DRXJ_16TO8(92)}, /* TARGET_MODE = 2, 3: PFI_A = -20/32; PFI_B = -49/32; PFI_C = 23/32; fg = 0.8 MHz (Att=25dB) */ 9942 {DRXJ_16TO8(-80), DRXJ_16TO8(-98), DRXJ_16TO8(92)} /* TARGET_MODE = 2, 3: PFI_A = -20/32; PFI_B = -49/32; PFI_C = 23/32; fg = 0.8 MHz (Att=25dB) */ 9943 }; 9944 u16 mode_index; 9945 9946 dev_addr = demod->my_i2c_dev_addr; 9947 ext_attr = (struct drxj_data *) demod->my_ext_attr; 9948 mirror_freq_spect_oob = ext_attr->mirror_freq_spect_oob; 9949 9950 /* Check parameters */ 9951 if (oob_param == NULL) { 9952 /* power off oob module */ 9953 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 9954 | SCU_RAM_COMMAND_CMD_DEMOD_STOP; 9955 scu_cmd.parameter_len = 0; 9956 scu_cmd.result_len = 1; 9957 scu_cmd.result = cmd_result; 9958 rc = scu_command(dev_addr, &scu_cmd); 9959 if (rc != 0) { 9960 pr_err("error %d\n", rc); 9961 goto rw_error; 9962 } 9963 rc = set_orx_nsu_aox(demod, false); 9964 if (rc != 0) { 9965 pr_err("error %d\n", rc); 9966 goto rw_error; 9967 } 9968 rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_STOP, 0); 9969 if (rc != 0) { 9970 pr_err("error %d\n", rc); 9971 goto rw_error; 9972 } 9973 9974 ext_attr->oob_power_on = false; 9975 return 0; 9976 } 9977 9978 freq = oob_param->frequency; 9979 if ((freq < 70000) || (freq > 130000)) 9980 return -EIO; 9981 freq = (freq - 50000) / 50; 9982 9983 { 9984 u16 index = 0; 9985 u16 remainder = 0; 9986 u16 *trk_filtercfg = ext_attr->oob_trk_filter_cfg; 9987 9988 index = (u16) ((freq - 400) / 200); 9989 remainder = (u16) ((freq - 400) % 200); 9990 trk_filter_value = 9991 trk_filtercfg[index] - (trk_filtercfg[index] - 9992 trk_filtercfg[index + 9993 1]) / 10 * remainder / 9994 20; 9995 } 9996 9997 /********/ 9998 /* Stop */ 9999 /********/ 10000 rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_STOP, 0); 10001 if (rc != 0) { 10002 pr_err("error %d\n", rc); 10003 goto rw_error; 10004 } 10005 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10006 | SCU_RAM_COMMAND_CMD_DEMOD_STOP; 10007 scu_cmd.parameter_len = 0; 10008 scu_cmd.result_len = 1; 10009 scu_cmd.result = cmd_result; 10010 rc = scu_command(dev_addr, &scu_cmd); 10011 if (rc != 0) { 10012 pr_err("error %d\n", rc); 10013 goto rw_error; 10014 } 10015 /********/ 10016 /* Reset */ 10017 /********/ 10018 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10019 | SCU_RAM_COMMAND_CMD_DEMOD_RESET; 10020 scu_cmd.parameter_len = 0; 10021 scu_cmd.result_len = 1; 10022 scu_cmd.result = cmd_result; 10023 rc = scu_command(dev_addr, &scu_cmd); 10024 if (rc != 0) { 10025 pr_err("error %d\n", rc); 10026 goto rw_error; 10027 } 10028 /**********/ 10029 /* SET_ENV */ 10030 /**********/ 10031 /* set frequency, spectrum inversion and data rate */ 10032 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10033 | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV; 10034 scu_cmd.parameter_len = 3; 10035 /* 1-data rate;2-frequency */ 10036 switch (oob_param->standard) { 10037 case DRX_OOB_MODE_A: 10038 if ( 10039 /* signal is transmitted inverted */ 10040 ((oob_param->spectrum_inverted == true) && 10041 /* and tuner is not mirroring the signal */ 10042 (!mirror_freq_spect_oob)) | 10043 /* or */ 10044 /* signal is transmitted noninverted */ 10045 ((oob_param->spectrum_inverted == false) && 10046 /* and tuner is mirroring the signal */ 10047 (mirror_freq_spect_oob)) 10048 ) 10049 set_param_parameters[0] = 10050 SCU_RAM_ORX_RF_RX_DATA_RATE_2048KBPS_INVSPEC; 10051 else 10052 set_param_parameters[0] = 10053 SCU_RAM_ORX_RF_RX_DATA_RATE_2048KBPS_REGSPEC; 10054 break; 10055 case DRX_OOB_MODE_B_GRADE_A: 10056 if ( 10057 /* signal is transmitted inverted */ 10058 ((oob_param->spectrum_inverted == true) && 10059 /* and tuner is not mirroring the signal */ 10060 (!mirror_freq_spect_oob)) | 10061 /* or */ 10062 /* signal is transmitted noninverted */ 10063 ((oob_param->spectrum_inverted == false) && 10064 /* and tuner is mirroring the signal */ 10065 (mirror_freq_spect_oob)) 10066 ) 10067 set_param_parameters[0] = 10068 SCU_RAM_ORX_RF_RX_DATA_RATE_1544KBPS_INVSPEC; 10069 else 10070 set_param_parameters[0] = 10071 SCU_RAM_ORX_RF_RX_DATA_RATE_1544KBPS_REGSPEC; 10072 break; 10073 case DRX_OOB_MODE_B_GRADE_B: 10074 default: 10075 if ( 10076 /* signal is transmitted inverted */ 10077 ((oob_param->spectrum_inverted == true) && 10078 /* and tuner is not mirroring the signal */ 10079 (!mirror_freq_spect_oob)) | 10080 /* or */ 10081 /* signal is transmitted noninverted */ 10082 ((oob_param->spectrum_inverted == false) && 10083 /* and tuner is mirroring the signal */ 10084 (mirror_freq_spect_oob)) 10085 ) 10086 set_param_parameters[0] = 10087 SCU_RAM_ORX_RF_RX_DATA_RATE_3088KBPS_INVSPEC; 10088 else 10089 set_param_parameters[0] = 10090 SCU_RAM_ORX_RF_RX_DATA_RATE_3088KBPS_REGSPEC; 10091 break; 10092 } 10093 set_param_parameters[1] = (u16) (freq & 0xFFFF); 10094 set_param_parameters[2] = trk_filter_value; 10095 scu_cmd.parameter = set_param_parameters; 10096 scu_cmd.result_len = 1; 10097 scu_cmd.result = cmd_result; 10098 mode_index = mode_val[(set_param_parameters[0] & 0xC0) >> 6]; 10099 rc = scu_command(dev_addr, &scu_cmd); 10100 if (rc != 0) { 10101 pr_err("error %d\n", rc); 10102 goto rw_error; 10103 } 10104 10105 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0xFABA, 0); 10106 if (rc != 0) { 10107 pr_err("error %d\n", rc); 10108 goto rw_error; 10109 } /* Write magic word to enable pdr reg write */ 10110 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_OOB_CRX_CFG__A, OOB_CRX_DRIVE_STRENGTH << SIO_PDR_OOB_CRX_CFG_DRIVE__B | 0x03 << SIO_PDR_OOB_CRX_CFG_MODE__B, 0); 10111 if (rc != 0) { 10112 pr_err("error %d\n", rc); 10113 goto rw_error; 10114 } 10115 rc = drxj_dap_write_reg16(dev_addr, SIO_PDR_OOB_DRX_CFG__A, OOB_DRX_DRIVE_STRENGTH << SIO_PDR_OOB_DRX_CFG_DRIVE__B | 0x03 << SIO_PDR_OOB_DRX_CFG_MODE__B, 0); 10116 if (rc != 0) { 10117 pr_err("error %d\n", rc); 10118 goto rw_error; 10119 } 10120 rc = drxj_dap_write_reg16(dev_addr, SIO_TOP_COMM_KEY__A, 0x0000, 0); 10121 if (rc != 0) { 10122 pr_err("error %d\n", rc); 10123 goto rw_error; 10124 } /* Write magic word to disable pdr reg write */ 10125 10126 rc = drxj_dap_write_reg16(dev_addr, ORX_TOP_COMM_KEY__A, 0, 0); 10127 if (rc != 0) { 10128 pr_err("error %d\n", rc); 10129 goto rw_error; 10130 } 10131 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_AAG_LEN_W__A, 16000, 0); 10132 if (rc != 0) { 10133 pr_err("error %d\n", rc); 10134 goto rw_error; 10135 } 10136 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_AAG_THR_W__A, 40, 0); 10137 if (rc != 0) { 10138 pr_err("error %d\n", rc); 10139 goto rw_error; 10140 } 10141 10142 /* ddc */ 10143 rc = drxj_dap_write_reg16(dev_addr, ORX_DDC_OFO_SET_W__A, ORX_DDC_OFO_SET_W__PRE, 0); 10144 if (rc != 0) { 10145 pr_err("error %d\n", rc); 10146 goto rw_error; 10147 } 10148 10149 /* nsu */ 10150 rc = drxj_dap_write_reg16(dev_addr, ORX_NSU_AOX_LOPOW_W__A, ext_attr->oob_lo_pow, 0); 10151 if (rc != 0) { 10152 pr_err("error %d\n", rc); 10153 goto rw_error; 10154 } 10155 10156 /* initialization for target mode */ 10157 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TARGET_MODE__A, SCU_RAM_ORX_TARGET_MODE_2048KBPS_SQRT, 0); 10158 if (rc != 0) { 10159 pr_err("error %d\n", rc); 10160 goto rw_error; 10161 } 10162 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FREQ_GAIN_CORR__A, SCU_RAM_ORX_FREQ_GAIN_CORR_2048KBPS, 0); 10163 if (rc != 0) { 10164 pr_err("error %d\n", rc); 10165 goto rw_error; 10166 } 10167 10168 /* Reset bits for timing and freq. recovery */ 10169 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_CPH__A, 0x0001, 0); 10170 if (rc != 0) { 10171 pr_err("error %d\n", rc); 10172 goto rw_error; 10173 } 10174 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_CTI__A, 0x0002, 0); 10175 if (rc != 0) { 10176 pr_err("error %d\n", rc); 10177 goto rw_error; 10178 } 10179 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_KRN__A, 0x0004, 0); 10180 if (rc != 0) { 10181 pr_err("error %d\n", rc); 10182 goto rw_error; 10183 } 10184 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_RST_KRP__A, 0x0008, 0); 10185 if (rc != 0) { 10186 pr_err("error %d\n", rc); 10187 goto rw_error; 10188 } 10189 10190 /* AGN_LOCK = {2048>>3, -2048, 8, -8, 0, 1}; */ 10191 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_LOCK_TH__A, 2048 >> 3, 0); 10192 if (rc != 0) { 10193 pr_err("error %d\n", rc); 10194 goto rw_error; 10195 } 10196 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_LOCK_TOTH__A, (u16)(-2048), 0); 10197 if (rc != 0) { 10198 pr_err("error %d\n", rc); 10199 goto rw_error; 10200 } 10201 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_ONLOCK_TTH__A, 8, 0); 10202 if (rc != 0) { 10203 pr_err("error %d\n", rc); 10204 goto rw_error; 10205 } 10206 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_UNLOCK_TTH__A, (u16)(-8), 0); 10207 if (rc != 0) { 10208 pr_err("error %d\n", rc); 10209 goto rw_error; 10210 } 10211 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_AGN_LOCK_MASK__A, 1, 0); 10212 if (rc != 0) { 10213 pr_err("error %d\n", rc); 10214 goto rw_error; 10215 } 10216 10217 /* DGN_LOCK = {10, -2048, 8, -8, 0, 1<<1}; */ 10218 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_LOCK_TH__A, 10, 0); 10219 if (rc != 0) { 10220 pr_err("error %d\n", rc); 10221 goto rw_error; 10222 } 10223 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_LOCK_TOTH__A, (u16)(-2048), 0); 10224 if (rc != 0) { 10225 pr_err("error %d\n", rc); 10226 goto rw_error; 10227 } 10228 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_ONLOCK_TTH__A, 8, 0); 10229 if (rc != 0) { 10230 pr_err("error %d\n", rc); 10231 goto rw_error; 10232 } 10233 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_UNLOCK_TTH__A, (u16)(-8), 0); 10234 if (rc != 0) { 10235 pr_err("error %d\n", rc); 10236 goto rw_error; 10237 } 10238 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_DGN_LOCK_MASK__A, 1 << 1, 0); 10239 if (rc != 0) { 10240 pr_err("error %d\n", rc); 10241 goto rw_error; 10242 } 10243 10244 /* FRQ_LOCK = {15,-2048, 8, -8, 0, 1<<2}; */ 10245 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_LOCK_TH__A, 17, 0); 10246 if (rc != 0) { 10247 pr_err("error %d\n", rc); 10248 goto rw_error; 10249 } 10250 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_LOCK_TOTH__A, (u16)(-2048), 0); 10251 if (rc != 0) { 10252 pr_err("error %d\n", rc); 10253 goto rw_error; 10254 } 10255 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_ONLOCK_TTH__A, 8, 0); 10256 if (rc != 0) { 10257 pr_err("error %d\n", rc); 10258 goto rw_error; 10259 } 10260 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_UNLOCK_TTH__A, (u16)(-8), 0); 10261 if (rc != 0) { 10262 pr_err("error %d\n", rc); 10263 goto rw_error; 10264 } 10265 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_FRQ_LOCK_MASK__A, 1 << 2, 0); 10266 if (rc != 0) { 10267 pr_err("error %d\n", rc); 10268 goto rw_error; 10269 } 10270 10271 /* PHA_LOCK = {5000, -2048, 8, -8, 0, 1<<3}; */ 10272 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_LOCK_TH__A, 3000, 0); 10273 if (rc != 0) { 10274 pr_err("error %d\n", rc); 10275 goto rw_error; 10276 } 10277 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_LOCK_TOTH__A, (u16)(-2048), 0); 10278 if (rc != 0) { 10279 pr_err("error %d\n", rc); 10280 goto rw_error; 10281 } 10282 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_ONLOCK_TTH__A, 8, 0); 10283 if (rc != 0) { 10284 pr_err("error %d\n", rc); 10285 goto rw_error; 10286 } 10287 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_UNLOCK_TTH__A, (u16)(-8), 0); 10288 if (rc != 0) { 10289 pr_err("error %d\n", rc); 10290 goto rw_error; 10291 } 10292 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_PHA_LOCK_MASK__A, 1 << 3, 0); 10293 if (rc != 0) { 10294 pr_err("error %d\n", rc); 10295 goto rw_error; 10296 } 10297 10298 /* TIM_LOCK = {300, -2048, 8, -8, 0, 1<<4}; */ 10299 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_LOCK_TH__A, 400, 0); 10300 if (rc != 0) { 10301 pr_err("error %d\n", rc); 10302 goto rw_error; 10303 } 10304 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_LOCK_TOTH__A, (u16)(-2048), 0); 10305 if (rc != 0) { 10306 pr_err("error %d\n", rc); 10307 goto rw_error; 10308 } 10309 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_ONLOCK_TTH__A, 8, 0); 10310 if (rc != 0) { 10311 pr_err("error %d\n", rc); 10312 goto rw_error; 10313 } 10314 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_UNLOCK_TTH__A, (u16)(-8), 0); 10315 if (rc != 0) { 10316 pr_err("error %d\n", rc); 10317 goto rw_error; 10318 } 10319 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_TIM_LOCK_MASK__A, 1 << 4, 0); 10320 if (rc != 0) { 10321 pr_err("error %d\n", rc); 10322 goto rw_error; 10323 } 10324 10325 /* EQU_LOCK = {20, -2048, 8, -8, 0, 1<<5}; */ 10326 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_LOCK_TH__A, 20, 0); 10327 if (rc != 0) { 10328 pr_err("error %d\n", rc); 10329 goto rw_error; 10330 } 10331 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_LOCK_TOTH__A, (u16)(-2048), 0); 10332 if (rc != 0) { 10333 pr_err("error %d\n", rc); 10334 goto rw_error; 10335 } 10336 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_ONLOCK_TTH__A, 4, 0); 10337 if (rc != 0) { 10338 pr_err("error %d\n", rc); 10339 goto rw_error; 10340 } 10341 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_UNLOCK_TTH__A, (u16)(-4), 0); 10342 if (rc != 0) { 10343 pr_err("error %d\n", rc); 10344 goto rw_error; 10345 } 10346 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_ORX_EQU_LOCK_MASK__A, 1 << 5, 0); 10347 if (rc != 0) { 10348 pr_err("error %d\n", rc); 10349 goto rw_error; 10350 } 10351 10352 /* PRE-Filter coefficients (PFI) */ 10353 rc = drxdap_fasi_write_block(dev_addr, ORX_FWP_PFI_A_W__A, sizeof(pfi_coeffs[mode_index]), ((u8 *)pfi_coeffs[mode_index]), 0); 10354 if (rc != 0) { 10355 pr_err("error %d\n", rc); 10356 goto rw_error; 10357 } 10358 rc = drxj_dap_write_reg16(dev_addr, ORX_TOP_MDE_W__A, mode_index, 0); 10359 if (rc != 0) { 10360 pr_err("error %d\n", rc); 10361 goto rw_error; 10362 } 10363 10364 /* NYQUIST-Filter coefficients (NYQ) */ 10365 for (i = 0; i < (NYQFILTERLEN + 1) / 2; i++) { 10366 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_NYQ_ADR_W__A, i, 0); 10367 if (rc != 0) { 10368 pr_err("error %d\n", rc); 10369 goto rw_error; 10370 } 10371 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_NYQ_COF_RW__A, nyquist_coeffs[mode_index][i], 0); 10372 if (rc != 0) { 10373 pr_err("error %d\n", rc); 10374 goto rw_error; 10375 } 10376 } 10377 rc = drxj_dap_write_reg16(dev_addr, ORX_FWP_NYQ_ADR_W__A, 31, 0); 10378 if (rc != 0) { 10379 pr_err("error %d\n", rc); 10380 goto rw_error; 10381 } 10382 rc = drxj_dap_write_reg16(dev_addr, ORX_COMM_EXEC__A, ORX_COMM_EXEC_ACTIVE, 0); 10383 if (rc != 0) { 10384 pr_err("error %d\n", rc); 10385 goto rw_error; 10386 } 10387 /********/ 10388 /* Start */ 10389 /********/ 10390 scu_cmd.command = SCU_RAM_COMMAND_STANDARD_OOB 10391 | SCU_RAM_COMMAND_CMD_DEMOD_START; 10392 scu_cmd.parameter_len = 0; 10393 scu_cmd.result_len = 1; 10394 scu_cmd.result = cmd_result; 10395 rc = scu_command(dev_addr, &scu_cmd); 10396 if (rc != 0) { 10397 pr_err("error %d\n", rc); 10398 goto rw_error; 10399 } 10400 10401 rc = set_orx_nsu_aox(demod, true); 10402 if (rc != 0) { 10403 pr_err("error %d\n", rc); 10404 goto rw_error; 10405 } 10406 rc = drxj_dap_write_reg16(dev_addr, ORX_NSU_AOX_STHR_W__A, ext_attr->oob_pre_saw, 0); 10407 if (rc != 0) { 10408 pr_err("error %d\n", rc); 10409 goto rw_error; 10410 } 10411 10412 ext_attr->oob_power_on = true; 10413 10414 return 0; 10415 rw_error: 10416 return rc; 10417 } 10418 10419 /*============================================================================*/ 10420 /*== END OOB DATAPATH FUNCTIONS ==*/ 10421 /*============================================================================*/ 10422 10423 /*============================================================================= 10424 ===== MC command related functions ========================================== 10425 ===========================================================================*/ 10426 10427 /*============================================================================= 10428 ===== ctrl_set_channel() ========================================================== 10429 ===========================================================================*/ 10430 /* 10431 * \fn int ctrl_set_channel() 10432 * \brief Select a new transmission channel. 10433 * \param demod instance of demod. 10434 * \param channel Pointer to channel data. 10435 * \return int. 10436 * 10437 * In case the tuner module is not used and in case of NTSC/FM the pogrammer 10438 * must tune the tuner to the centre frequency of the NTSC/FM channel. 10439 * 10440 */ 10441 static int 10442 ctrl_set_channel(struct drx_demod_instance *demod, struct drx_channel *channel) 10443 { 10444 int rc; 10445 s32 tuner_freq_offset = 0; 10446 struct drxj_data *ext_attr = NULL; 10447 struct i2c_device_addr *dev_addr = NULL; 10448 enum drx_standard standard = DRX_STANDARD_UNKNOWN; 10449 #ifndef DRXJ_VSB_ONLY 10450 u32 min_symbol_rate = 0; 10451 u32 max_symbol_rate = 0; 10452 int bandwidth_temp = 0; 10453 int bandwidth = 0; 10454 #endif 10455 /*== check arguments ======================================================*/ 10456 if ((demod == NULL) || (channel == NULL)) 10457 return -EINVAL; 10458 10459 dev_addr = demod->my_i2c_dev_addr; 10460 ext_attr = (struct drxj_data *) demod->my_ext_attr; 10461 standard = ext_attr->standard; 10462 10463 /* check valid standards */ 10464 switch (standard) { 10465 case DRX_STANDARD_8VSB: 10466 #ifndef DRXJ_VSB_ONLY 10467 case DRX_STANDARD_ITU_A: 10468 case DRX_STANDARD_ITU_B: 10469 case DRX_STANDARD_ITU_C: 10470 #endif /* DRXJ_VSB_ONLY */ 10471 break; 10472 case DRX_STANDARD_UNKNOWN: 10473 default: 10474 return -EINVAL; 10475 } 10476 10477 /* check bandwidth QAM annex B, NTSC and 8VSB */ 10478 if ((standard == DRX_STANDARD_ITU_B) || 10479 (standard == DRX_STANDARD_8VSB) || 10480 (standard == DRX_STANDARD_NTSC)) { 10481 switch (channel->bandwidth) { 10482 case DRX_BANDWIDTH_6MHZ: 10483 case DRX_BANDWIDTH_UNKNOWN: 10484 channel->bandwidth = DRX_BANDWIDTH_6MHZ; 10485 break; 10486 case DRX_BANDWIDTH_8MHZ: 10487 case DRX_BANDWIDTH_7MHZ: 10488 default: 10489 return -EINVAL; 10490 } 10491 } 10492 10493 /* For QAM annex A and annex C: 10494 -check symbolrate and constellation 10495 -derive bandwidth from symbolrate (input bandwidth is ignored) 10496 */ 10497 #ifndef DRXJ_VSB_ONLY 10498 if ((standard == DRX_STANDARD_ITU_A) || 10499 (standard == DRX_STANDARD_ITU_C)) { 10500 struct drxuio_cfg uio_cfg = { DRX_UIO1, DRX_UIO_MODE_FIRMWARE_SAW }; 10501 int bw_rolloff_factor = 0; 10502 10503 bw_rolloff_factor = (standard == DRX_STANDARD_ITU_A) ? 115 : 113; 10504 min_symbol_rate = DRXJ_QAM_SYMBOLRATE_MIN; 10505 max_symbol_rate = DRXJ_QAM_SYMBOLRATE_MAX; 10506 /* config SMA_TX pin to SAW switch mode */ 10507 rc = ctrl_set_uio_cfg(demod, &uio_cfg); 10508 if (rc != 0) { 10509 pr_err("error %d\n", rc); 10510 goto rw_error; 10511 } 10512 10513 if (channel->symbolrate < min_symbol_rate || 10514 channel->symbolrate > max_symbol_rate) { 10515 return -EINVAL; 10516 } 10517 10518 switch (channel->constellation) { 10519 case DRX_CONSTELLATION_QAM16: 10520 case DRX_CONSTELLATION_QAM32: 10521 case DRX_CONSTELLATION_QAM64: 10522 case DRX_CONSTELLATION_QAM128: 10523 case DRX_CONSTELLATION_QAM256: 10524 bandwidth_temp = channel->symbolrate * bw_rolloff_factor; 10525 bandwidth = bandwidth_temp / 100; 10526 10527 if ((bandwidth_temp % 100) >= 50) 10528 bandwidth++; 10529 10530 if (bandwidth <= 6100000) { 10531 channel->bandwidth = DRX_BANDWIDTH_6MHZ; 10532 } else if ((bandwidth > 6100000) 10533 && (bandwidth <= 7100000)) { 10534 channel->bandwidth = DRX_BANDWIDTH_7MHZ; 10535 } else if (bandwidth > 7100000) { 10536 channel->bandwidth = DRX_BANDWIDTH_8MHZ; 10537 } 10538 break; 10539 default: 10540 return -EINVAL; 10541 } 10542 } 10543 10544 /* For QAM annex B: 10545 -check constellation 10546 */ 10547 if (standard == DRX_STANDARD_ITU_B) { 10548 switch (channel->constellation) { 10549 case DRX_CONSTELLATION_AUTO: 10550 case DRX_CONSTELLATION_QAM256: 10551 case DRX_CONSTELLATION_QAM64: 10552 break; 10553 default: 10554 return -EINVAL; 10555 } 10556 10557 switch (channel->interleavemode) { 10558 case DRX_INTERLEAVEMODE_I128_J1: 10559 case DRX_INTERLEAVEMODE_I128_J1_V2: 10560 case DRX_INTERLEAVEMODE_I128_J2: 10561 case DRX_INTERLEAVEMODE_I64_J2: 10562 case DRX_INTERLEAVEMODE_I128_J3: 10563 case DRX_INTERLEAVEMODE_I32_J4: 10564 case DRX_INTERLEAVEMODE_I128_J4: 10565 case DRX_INTERLEAVEMODE_I16_J8: 10566 case DRX_INTERLEAVEMODE_I128_J5: 10567 case DRX_INTERLEAVEMODE_I8_J16: 10568 case DRX_INTERLEAVEMODE_I128_J6: 10569 case DRX_INTERLEAVEMODE_I128_J7: 10570 case DRX_INTERLEAVEMODE_I128_J8: 10571 case DRX_INTERLEAVEMODE_I12_J17: 10572 case DRX_INTERLEAVEMODE_I5_J4: 10573 case DRX_INTERLEAVEMODE_B52_M240: 10574 case DRX_INTERLEAVEMODE_B52_M720: 10575 case DRX_INTERLEAVEMODE_UNKNOWN: 10576 case DRX_INTERLEAVEMODE_AUTO: 10577 break; 10578 default: 10579 return -EINVAL; 10580 } 10581 } 10582 10583 if ((ext_attr->uio_sma_tx_mode) == DRX_UIO_MODE_FIRMWARE_SAW) { 10584 /* SAW SW, user UIO is used for switchable SAW */ 10585 struct drxuio_data uio1 = { DRX_UIO1, false }; 10586 10587 switch (channel->bandwidth) { 10588 case DRX_BANDWIDTH_8MHZ: 10589 uio1.value = true; 10590 break; 10591 case DRX_BANDWIDTH_7MHZ: 10592 uio1.value = false; 10593 break; 10594 case DRX_BANDWIDTH_6MHZ: 10595 uio1.value = false; 10596 break; 10597 case DRX_BANDWIDTH_UNKNOWN: 10598 default: 10599 return -EINVAL; 10600 } 10601 10602 rc = ctrl_uio_write(demod, &uio1); 10603 if (rc != 0) { 10604 pr_err("error %d\n", rc); 10605 goto rw_error; 10606 } 10607 } 10608 #endif /* DRXJ_VSB_ONLY */ 10609 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE, 0); 10610 if (rc != 0) { 10611 pr_err("error %d\n", rc); 10612 goto rw_error; 10613 } 10614 10615 tuner_freq_offset = 0; 10616 10617 /*== Setup demod for specific standard ====================================*/ 10618 switch (standard) { 10619 case DRX_STANDARD_8VSB: 10620 if (channel->mirror == DRX_MIRROR_AUTO) 10621 ext_attr->mirror = DRX_MIRROR_NO; 10622 else 10623 ext_attr->mirror = channel->mirror; 10624 rc = set_vsb(demod); 10625 if (rc != 0) { 10626 pr_err("error %d\n", rc); 10627 goto rw_error; 10628 } 10629 rc = set_frequency(demod, channel, tuner_freq_offset); 10630 if (rc != 0) { 10631 pr_err("error %d\n", rc); 10632 goto rw_error; 10633 } 10634 break; 10635 #ifndef DRXJ_VSB_ONLY 10636 case DRX_STANDARD_ITU_A: 10637 case DRX_STANDARD_ITU_B: 10638 case DRX_STANDARD_ITU_C: 10639 rc = set_qam_channel(demod, channel, tuner_freq_offset); 10640 if (rc != 0) { 10641 pr_err("error %d\n", rc); 10642 goto rw_error; 10643 } 10644 break; 10645 #endif 10646 case DRX_STANDARD_UNKNOWN: 10647 default: 10648 return -EIO; 10649 } 10650 10651 /* flag the packet error counter reset */ 10652 ext_attr->reset_pkt_err_acc = true; 10653 10654 return 0; 10655 rw_error: 10656 return rc; 10657 } 10658 10659 /*============================================================================= 10660 ===== SigQuality() ========================================================== 10661 ===========================================================================*/ 10662 10663 /* 10664 * \fn int ctrl_sig_quality() 10665 * \brief Retrieve signal quality form device. 10666 * \param devmod Pointer to demodulator instance. 10667 * \param sig_quality Pointer to signal quality data. 10668 * \return int. 10669 * \retval 0 sig_quality contains valid data. 10670 * \retval -EINVAL sig_quality is NULL. 10671 * \retval -EIO Erroneous data, sig_quality contains invalid data. 10672 10673 */ 10674 static int 10675 ctrl_sig_quality(struct drx_demod_instance *demod, 10676 enum drx_lock_status lock_status) 10677 { 10678 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 10679 struct drxj_data *ext_attr = demod->my_ext_attr; 10680 struct drx39xxj_state *state = dev_addr->user_data; 10681 struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache; 10682 enum drx_standard standard = ext_attr->standard; 10683 int rc; 10684 u32 ber, cnt, err, pkt; 10685 u16 mer, strength = 0; 10686 10687 rc = get_sig_strength(demod, &strength); 10688 if (rc < 0) { 10689 pr_err("error getting signal strength %d\n", rc); 10690 p->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10691 } else { 10692 p->strength.stat[0].scale = FE_SCALE_RELATIVE; 10693 p->strength.stat[0].uvalue = 65535UL * strength/ 100; 10694 } 10695 10696 switch (standard) { 10697 case DRX_STANDARD_8VSB: 10698 #ifdef DRXJ_SIGNAL_ACCUM_ERR 10699 rc = get_acc_pkt_err(demod, &pkt); 10700 if (rc != 0) { 10701 pr_err("error %d\n", rc); 10702 goto rw_error; 10703 } 10704 #endif 10705 if (lock_status != DRXJ_DEMOD_LOCK && lock_status != DRX_LOCKED) { 10706 p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10707 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10708 p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10709 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10710 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10711 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10712 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10713 } else { 10714 rc = get_vsb_post_rs_pck_err(dev_addr, &err, &pkt); 10715 if (rc != 0) { 10716 pr_err("error %d getting UCB\n", rc); 10717 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10718 } else { 10719 p->block_error.stat[0].scale = FE_SCALE_COUNTER; 10720 p->block_error.stat[0].uvalue += err; 10721 p->block_count.stat[0].scale = FE_SCALE_COUNTER; 10722 p->block_count.stat[0].uvalue += pkt; 10723 } 10724 10725 /* PostViterbi is compute in steps of 10^(-6) */ 10726 rc = get_vs_bpre_viterbi_ber(dev_addr, &ber, &cnt); 10727 if (rc != 0) { 10728 pr_err("error %d getting pre-ber\n", rc); 10729 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10730 } else { 10731 p->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; 10732 p->pre_bit_error.stat[0].uvalue += ber; 10733 p->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; 10734 p->pre_bit_count.stat[0].uvalue += cnt; 10735 } 10736 10737 rc = get_vs_bpost_viterbi_ber(dev_addr, &ber, &cnt); 10738 if (rc != 0) { 10739 pr_err("error %d getting post-ber\n", rc); 10740 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10741 } else { 10742 p->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; 10743 p->post_bit_error.stat[0].uvalue += ber; 10744 p->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; 10745 p->post_bit_count.stat[0].uvalue += cnt; 10746 } 10747 rc = get_vsbmer(dev_addr, &mer); 10748 if (rc != 0) { 10749 pr_err("error %d getting MER\n", rc); 10750 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 10751 } else { 10752 p->cnr.stat[0].svalue = mer * 100; 10753 p->cnr.stat[0].scale = FE_SCALE_DECIBEL; 10754 } 10755 } 10756 break; 10757 #ifndef DRXJ_VSB_ONLY 10758 case DRX_STANDARD_ITU_A: 10759 case DRX_STANDARD_ITU_B: 10760 case DRX_STANDARD_ITU_C: 10761 rc = ctrl_get_qam_sig_quality(demod); 10762 if (rc != 0) { 10763 pr_err("error %d\n", rc); 10764 goto rw_error; 10765 } 10766 break; 10767 #endif 10768 default: 10769 return -EIO; 10770 } 10771 10772 return 0; 10773 rw_error: 10774 return rc; 10775 } 10776 10777 /*============================================================================*/ 10778 10779 /* 10780 * \fn int ctrl_lock_status() 10781 * \brief Retrieve lock status . 10782 * \param dev_addr Pointer to demodulator device address. 10783 * \param lock_stat Pointer to lock status structure. 10784 * \return int. 10785 * 10786 */ 10787 static int 10788 ctrl_lock_status(struct drx_demod_instance *demod, enum drx_lock_status *lock_stat) 10789 { 10790 enum drx_standard standard = DRX_STANDARD_UNKNOWN; 10791 struct drxj_data *ext_attr = NULL; 10792 struct i2c_device_addr *dev_addr = NULL; 10793 struct drxjscu_cmd cmd_scu = { /* command */ 0, 10794 /* parameter_len */ 0, 10795 /* result_len */ 0, 10796 /* *parameter */ NULL, 10797 /* *result */ NULL 10798 }; 10799 int rc; 10800 u16 cmd_result[2] = { 0, 0 }; 10801 u16 demod_lock = SCU_RAM_PARAM_1_RES_DEMOD_GET_LOCK_DEMOD_LOCKED; 10802 10803 /* check arguments */ 10804 if ((demod == NULL) || (lock_stat == NULL)) 10805 return -EINVAL; 10806 10807 dev_addr = demod->my_i2c_dev_addr; 10808 ext_attr = (struct drxj_data *) demod->my_ext_attr; 10809 standard = ext_attr->standard; 10810 10811 *lock_stat = DRX_NOT_LOCKED; 10812 10813 /* define the SCU command code */ 10814 switch (standard) { 10815 case DRX_STANDARD_8VSB: 10816 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_VSB | 10817 SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK; 10818 demod_lock |= 0x6; 10819 break; 10820 #ifndef DRXJ_VSB_ONLY 10821 case DRX_STANDARD_ITU_A: 10822 case DRX_STANDARD_ITU_B: 10823 case DRX_STANDARD_ITU_C: 10824 cmd_scu.command = SCU_RAM_COMMAND_STANDARD_QAM | 10825 SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK; 10826 break; 10827 #endif 10828 case DRX_STANDARD_UNKNOWN: 10829 default: 10830 return -EIO; 10831 } 10832 10833 /* define the SCU command parameters and execute the command */ 10834 cmd_scu.parameter_len = 0; 10835 cmd_scu.result_len = 2; 10836 cmd_scu.parameter = NULL; 10837 cmd_scu.result = cmd_result; 10838 rc = scu_command(dev_addr, &cmd_scu); 10839 if (rc != 0) { 10840 pr_err("error %d\n", rc); 10841 goto rw_error; 10842 } 10843 10844 /* set the lock status */ 10845 if (cmd_scu.result[1] < demod_lock) { 10846 /* 0x0000 NOT LOCKED */ 10847 *lock_stat = DRX_NOT_LOCKED; 10848 } else if (cmd_scu.result[1] < SCU_RAM_PARAM_1_RES_DEMOD_GET_LOCK_LOCKED) { 10849 *lock_stat = DRXJ_DEMOD_LOCK; 10850 } else if (cmd_scu.result[1] < 10851 SCU_RAM_PARAM_1_RES_DEMOD_GET_LOCK_NEVER_LOCK) { 10852 /* 0x8000 DEMOD + FEC LOCKED (system lock) */ 10853 *lock_stat = DRX_LOCKED; 10854 } else { 10855 /* 0xC000 NEVER LOCKED */ 10856 /* (system will never be able to lock to the signal) */ 10857 *lock_stat = DRX_NEVER_LOCK; 10858 } 10859 10860 return 0; 10861 rw_error: 10862 return rc; 10863 } 10864 10865 /*============================================================================*/ 10866 10867 /* 10868 * \fn int ctrl_set_standard() 10869 * \brief Set modulation standard to be used. 10870 * \param standard Modulation standard. 10871 * \return int. 10872 * 10873 * Setup stuff for the desired demodulation standard. 10874 * Disable and power down the previous selected demodulation standard 10875 * 10876 */ 10877 static int 10878 ctrl_set_standard(struct drx_demod_instance *demod, enum drx_standard *standard) 10879 { 10880 struct drxj_data *ext_attr = NULL; 10881 int rc; 10882 enum drx_standard prev_standard; 10883 10884 /* check arguments */ 10885 if ((standard == NULL) || (demod == NULL)) 10886 return -EINVAL; 10887 10888 ext_attr = (struct drxj_data *) demod->my_ext_attr; 10889 prev_standard = ext_attr->standard; 10890 10891 /* 10892 Stop and power down previous standard 10893 */ 10894 switch (prev_standard) { 10895 #ifndef DRXJ_VSB_ONLY 10896 case DRX_STANDARD_ITU_A: 10897 case DRX_STANDARD_ITU_B: 10898 case DRX_STANDARD_ITU_C: 10899 rc = power_down_qam(demod, false); 10900 if (rc != 0) { 10901 pr_err("error %d\n", rc); 10902 goto rw_error; 10903 } 10904 break; 10905 #endif 10906 case DRX_STANDARD_8VSB: 10907 rc = power_down_vsb(demod, false); 10908 if (rc != 0) { 10909 pr_err("error %d\n", rc); 10910 goto rw_error; 10911 } 10912 break; 10913 case DRX_STANDARD_UNKNOWN: 10914 /* Do nothing */ 10915 break; 10916 case DRX_STANDARD_AUTO: 10917 default: 10918 return -EINVAL; 10919 } 10920 10921 /* 10922 Initialize channel independent registers 10923 Power up new standard 10924 */ 10925 ext_attr->standard = *standard; 10926 10927 switch (*standard) { 10928 #ifndef DRXJ_VSB_ONLY 10929 case DRX_STANDARD_ITU_A: 10930 case DRX_STANDARD_ITU_B: 10931 case DRX_STANDARD_ITU_C: 10932 do { 10933 u16 dummy; 10934 rc = drxj_dap_read_reg16(demod->my_i2c_dev_addr, SCU_RAM_VERSION_HI__A, &dummy, 0); 10935 if (rc != 0) { 10936 pr_err("error %d\n", rc); 10937 goto rw_error; 10938 } 10939 } while (0); 10940 break; 10941 #endif 10942 case DRX_STANDARD_8VSB: 10943 rc = set_vsb_leak_n_gain(demod); 10944 if (rc != 0) { 10945 pr_err("error %d\n", rc); 10946 goto rw_error; 10947 } 10948 break; 10949 default: 10950 ext_attr->standard = DRX_STANDARD_UNKNOWN; 10951 return -EINVAL; 10952 } 10953 10954 return 0; 10955 rw_error: 10956 /* Don't know what the standard is now ... try again */ 10957 ext_attr->standard = DRX_STANDARD_UNKNOWN; 10958 return rc; 10959 } 10960 10961 /*============================================================================*/ 10962 10963 static void drxj_reset_mode(struct drxj_data *ext_attr) 10964 { 10965 /* Initialize default AFE configuration for QAM */ 10966 if (ext_attr->has_lna) { 10967 /* IF AGC off, PGA active */ 10968 #ifndef DRXJ_VSB_ONLY 10969 ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; 10970 ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; 10971 ext_attr->qam_pga_cfg = 140 + (11 * 13); 10972 #endif 10973 ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; 10974 ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_OFF; 10975 ext_attr->vsb_pga_cfg = 140 + (11 * 13); 10976 } else { 10977 /* IF AGC on, PGA not active */ 10978 #ifndef DRXJ_VSB_ONLY 10979 ext_attr->qam_if_agc_cfg.standard = DRX_STANDARD_ITU_B; 10980 ext_attr->qam_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 10981 ext_attr->qam_if_agc_cfg.min_output_level = 0; 10982 ext_attr->qam_if_agc_cfg.max_output_level = 0x7FFF; 10983 ext_attr->qam_if_agc_cfg.speed = 3; 10984 ext_attr->qam_if_agc_cfg.top = 1297; 10985 ext_attr->qam_pga_cfg = 140; 10986 #endif 10987 ext_attr->vsb_if_agc_cfg.standard = DRX_STANDARD_8VSB; 10988 ext_attr->vsb_if_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 10989 ext_attr->vsb_if_agc_cfg.min_output_level = 0; 10990 ext_attr->vsb_if_agc_cfg.max_output_level = 0x7FFF; 10991 ext_attr->vsb_if_agc_cfg.speed = 3; 10992 ext_attr->vsb_if_agc_cfg.top = 1024; 10993 ext_attr->vsb_pga_cfg = 140; 10994 } 10995 /* TODO: remove min_output_level and max_output_level for both QAM and VSB after */ 10996 /* mc has not used them */ 10997 #ifndef DRXJ_VSB_ONLY 10998 ext_attr->qam_rf_agc_cfg.standard = DRX_STANDARD_ITU_B; 10999 ext_attr->qam_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 11000 ext_attr->qam_rf_agc_cfg.min_output_level = 0; 11001 ext_attr->qam_rf_agc_cfg.max_output_level = 0x7FFF; 11002 ext_attr->qam_rf_agc_cfg.speed = 3; 11003 ext_attr->qam_rf_agc_cfg.top = 9500; 11004 ext_attr->qam_rf_agc_cfg.cut_off_current = 4000; 11005 ext_attr->qam_pre_saw_cfg.standard = DRX_STANDARD_ITU_B; 11006 ext_attr->qam_pre_saw_cfg.reference = 0x07; 11007 ext_attr->qam_pre_saw_cfg.use_pre_saw = true; 11008 #endif 11009 /* Initialize default AFE configuration for VSB */ 11010 ext_attr->vsb_rf_agc_cfg.standard = DRX_STANDARD_8VSB; 11011 ext_attr->vsb_rf_agc_cfg.ctrl_mode = DRX_AGC_CTRL_AUTO; 11012 ext_attr->vsb_rf_agc_cfg.min_output_level = 0; 11013 ext_attr->vsb_rf_agc_cfg.max_output_level = 0x7FFF; 11014 ext_attr->vsb_rf_agc_cfg.speed = 3; 11015 ext_attr->vsb_rf_agc_cfg.top = 9500; 11016 ext_attr->vsb_rf_agc_cfg.cut_off_current = 4000; 11017 ext_attr->vsb_pre_saw_cfg.standard = DRX_STANDARD_8VSB; 11018 ext_attr->vsb_pre_saw_cfg.reference = 0x07; 11019 ext_attr->vsb_pre_saw_cfg.use_pre_saw = true; 11020 } 11021 11022 /* 11023 * \fn int ctrl_power_mode() 11024 * \brief Set the power mode of the device to the specified power mode 11025 * \param demod Pointer to demodulator instance. 11026 * \param mode Pointer to new power mode. 11027 * \return int. 11028 * \retval 0 Success 11029 * \retval -EIO I2C error or other failure 11030 * \retval -EINVAL Invalid mode argument. 11031 * 11032 * 11033 */ 11034 static int 11035 ctrl_power_mode(struct drx_demod_instance *demod, enum drx_power_mode *mode) 11036 { 11037 struct drx_common_attr *common_attr = (struct drx_common_attr *) NULL; 11038 struct drxj_data *ext_attr = (struct drxj_data *) NULL; 11039 struct i2c_device_addr *dev_addr = (struct i2c_device_addr *)NULL; 11040 int rc; 11041 u16 sio_cc_pwd_mode = 0; 11042 11043 common_attr = (struct drx_common_attr *) demod->my_common_attr; 11044 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11045 dev_addr = demod->my_i2c_dev_addr; 11046 11047 /* Check arguments */ 11048 if (mode == NULL) 11049 return -EINVAL; 11050 11051 /* If already in requested power mode, do nothing */ 11052 if (common_attr->current_power_mode == *mode) 11053 return 0; 11054 11055 switch (*mode) { 11056 case DRX_POWER_UP: 11057 case DRXJ_POWER_DOWN_MAIN_PATH: 11058 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_NONE; 11059 break; 11060 case DRXJ_POWER_DOWN_CORE: 11061 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_CLOCK; 11062 break; 11063 case DRXJ_POWER_DOWN_PLL: 11064 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_PLL; 11065 break; 11066 case DRX_POWER_DOWN: 11067 sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OSC; 11068 break; 11069 default: 11070 /* Unknow sleep mode */ 11071 return -EINVAL; 11072 } 11073 11074 /* Check if device needs to be powered up */ 11075 if ((common_attr->current_power_mode != DRX_POWER_UP)) { 11076 rc = power_up_device(demod); 11077 if (rc != 0) { 11078 pr_err("error %d\n", rc); 11079 goto rw_error; 11080 } 11081 } 11082 11083 if (*mode == DRX_POWER_UP) { 11084 /* Restore analog & pin configuration */ 11085 11086 /* Initialize default AFE configuration for VSB */ 11087 drxj_reset_mode(ext_attr); 11088 } else { 11089 /* Power down to requested mode */ 11090 /* Backup some register settings */ 11091 /* Set pins with possible pull-ups connected to them in input mode */ 11092 /* Analog power down */ 11093 /* ADC power down */ 11094 /* Power down device */ 11095 /* stop all comm_exec */ 11096 /* 11097 Stop and power down previous standard 11098 */ 11099 11100 switch (ext_attr->standard) { 11101 case DRX_STANDARD_ITU_A: 11102 case DRX_STANDARD_ITU_B: 11103 case DRX_STANDARD_ITU_C: 11104 rc = power_down_qam(demod, true); 11105 if (rc != 0) { 11106 pr_err("error %d\n", rc); 11107 goto rw_error; 11108 } 11109 break; 11110 case DRX_STANDARD_8VSB: 11111 rc = power_down_vsb(demod, true); 11112 if (rc != 0) { 11113 pr_err("error %d\n", rc); 11114 goto rw_error; 11115 } 11116 break; 11117 case DRX_STANDARD_PAL_SECAM_BG: 11118 case DRX_STANDARD_PAL_SECAM_DK: 11119 case DRX_STANDARD_PAL_SECAM_I: 11120 case DRX_STANDARD_PAL_SECAM_L: 11121 case DRX_STANDARD_PAL_SECAM_LP: 11122 case DRX_STANDARD_NTSC: 11123 case DRX_STANDARD_FM: 11124 rc = power_down_atv(demod, ext_attr->standard, true); 11125 if (rc != 0) { 11126 pr_err("error %d\n", rc); 11127 goto rw_error; 11128 } 11129 break; 11130 case DRX_STANDARD_UNKNOWN: 11131 /* Do nothing */ 11132 break; 11133 case DRX_STANDARD_AUTO: 11134 default: 11135 return -EIO; 11136 } 11137 ext_attr->standard = DRX_STANDARD_UNKNOWN; 11138 } 11139 11140 if (*mode != DRXJ_POWER_DOWN_MAIN_PATH) { 11141 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_PWD_MODE__A, sio_cc_pwd_mode, 0); 11142 if (rc != 0) { 11143 pr_err("error %d\n", rc); 11144 goto rw_error; 11145 } 11146 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY, 0); 11147 if (rc != 0) { 11148 pr_err("error %d\n", rc); 11149 goto rw_error; 11150 } 11151 11152 if ((*mode != DRX_POWER_UP)) { 11153 /* Initialize HI, wakeup key especially before put IC to sleep */ 11154 rc = init_hi(demod); 11155 if (rc != 0) { 11156 pr_err("error %d\n", rc); 11157 goto rw_error; 11158 } 11159 11160 ext_attr->hi_cfg_ctrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; 11161 rc = hi_cfg_command(demod); 11162 if (rc != 0) { 11163 pr_err("error %d\n", rc); 11164 goto rw_error; 11165 } 11166 } 11167 } 11168 11169 common_attr->current_power_mode = *mode; 11170 11171 return 0; 11172 rw_error: 11173 return rc; 11174 } 11175 11176 /*============================================================================*/ 11177 /*== CTRL Set/Get Config related functions ===================================*/ 11178 /*============================================================================*/ 11179 11180 /* 11181 * \fn int ctrl_set_cfg_pre_saw() 11182 * \brief Set Pre-saw reference. 11183 * \param demod demod instance 11184 * \param u16 * 11185 * \return int. 11186 * 11187 * Check arguments 11188 * Dispatch handling to standard specific function. 11189 * 11190 */ 11191 static int 11192 ctrl_set_cfg_pre_saw(struct drx_demod_instance *demod, struct drxj_cfg_pre_saw *pre_saw) 11193 { 11194 struct i2c_device_addr *dev_addr = NULL; 11195 struct drxj_data *ext_attr = NULL; 11196 int rc; 11197 11198 dev_addr = demod->my_i2c_dev_addr; 11199 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11200 11201 /* check arguments */ 11202 if ((pre_saw == NULL) || (pre_saw->reference > IQM_AF_PDREF__M) 11203 ) { 11204 return -EINVAL; 11205 } 11206 11207 /* Only if standard is currently active */ 11208 if ((ext_attr->standard == pre_saw->standard) || 11209 (DRXJ_ISQAMSTD(ext_attr->standard) && 11210 DRXJ_ISQAMSTD(pre_saw->standard)) || 11211 (DRXJ_ISATVSTD(ext_attr->standard) && 11212 DRXJ_ISATVSTD(pre_saw->standard))) { 11213 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PDREF__A, pre_saw->reference, 0); 11214 if (rc != 0) { 11215 pr_err("error %d\n", rc); 11216 goto rw_error; 11217 } 11218 } 11219 11220 /* Store pre-saw settings */ 11221 switch (pre_saw->standard) { 11222 case DRX_STANDARD_8VSB: 11223 ext_attr->vsb_pre_saw_cfg = *pre_saw; 11224 break; 11225 #ifndef DRXJ_VSB_ONLY 11226 case DRX_STANDARD_ITU_A: 11227 case DRX_STANDARD_ITU_B: 11228 case DRX_STANDARD_ITU_C: 11229 ext_attr->qam_pre_saw_cfg = *pre_saw; 11230 break; 11231 #endif 11232 default: 11233 return -EINVAL; 11234 } 11235 11236 return 0; 11237 rw_error: 11238 return rc; 11239 } 11240 11241 /*============================================================================*/ 11242 11243 /* 11244 * \fn int ctrl_set_cfg_afe_gain() 11245 * \brief Set AFE Gain. 11246 * \param demod demod instance 11247 * \param u16 * 11248 * \return int. 11249 * 11250 * Check arguments 11251 * Dispatch handling to standard specific function. 11252 * 11253 */ 11254 static int 11255 ctrl_set_cfg_afe_gain(struct drx_demod_instance *demod, struct drxj_cfg_afe_gain *afe_gain) 11256 { 11257 struct i2c_device_addr *dev_addr = NULL; 11258 struct drxj_data *ext_attr = NULL; 11259 int rc; 11260 u8 gain = 0; 11261 11262 /* check arguments */ 11263 if (afe_gain == NULL) 11264 return -EINVAL; 11265 11266 dev_addr = demod->my_i2c_dev_addr; 11267 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11268 11269 switch (afe_gain->standard) { 11270 case DRX_STANDARD_8VSB: fallthrough; 11271 #ifndef DRXJ_VSB_ONLY 11272 case DRX_STANDARD_ITU_A: 11273 case DRX_STANDARD_ITU_B: 11274 case DRX_STANDARD_ITU_C: 11275 #endif 11276 /* Do nothing */ 11277 break; 11278 default: 11279 return -EINVAL; 11280 } 11281 11282 /* TODO PGA gain is also written by microcode (at least by QAM and VSB) 11283 So I (PJ) think interface requires choice between auto, user mode */ 11284 11285 if (afe_gain->gain >= 329) 11286 gain = 15; 11287 else if (afe_gain->gain <= 147) 11288 gain = 0; 11289 else 11290 gain = (afe_gain->gain - 140 + 6) / 13; 11291 11292 /* Only if standard is currently active */ 11293 if (ext_attr->standard == afe_gain->standard) { 11294 rc = drxj_dap_write_reg16(dev_addr, IQM_AF_PGA_GAIN__A, gain, 0); 11295 if (rc != 0) { 11296 pr_err("error %d\n", rc); 11297 goto rw_error; 11298 } 11299 } 11300 11301 /* Store AFE Gain settings */ 11302 switch (afe_gain->standard) { 11303 case DRX_STANDARD_8VSB: 11304 ext_attr->vsb_pga_cfg = gain * 13 + 140; 11305 break; 11306 #ifndef DRXJ_VSB_ONLY 11307 case DRX_STANDARD_ITU_A: 11308 case DRX_STANDARD_ITU_B: 11309 case DRX_STANDARD_ITU_C: 11310 ext_attr->qam_pga_cfg = gain * 13 + 140; 11311 break; 11312 #endif 11313 default: 11314 return -EIO; 11315 } 11316 11317 return 0; 11318 rw_error: 11319 return rc; 11320 } 11321 11322 /*============================================================================*/ 11323 11324 11325 /*============================================================================= 11326 ===== EXPORTED FUNCTIONS ====================================================*/ 11327 11328 static int drx_ctrl_u_code(struct drx_demod_instance *demod, 11329 struct drxu_code_info *mc_info, 11330 enum drxu_code_action action); 11331 static int drxj_set_lna_state(struct drx_demod_instance *demod, bool state); 11332 11333 /* 11334 * \fn drxj_open() 11335 * \brief Open the demod instance, configure device, configure drxdriver 11336 * \return Status_t Return status. 11337 * 11338 * drxj_open() can be called with a NULL ucode image => no ucode upload. 11339 * This means that drxj_open() must NOT contain SCU commands or, in general, 11340 * rely on SCU or AUD ucode to be present. 11341 * 11342 */ 11343 11344 static int drxj_open(struct drx_demod_instance *demod) 11345 { 11346 struct i2c_device_addr *dev_addr = NULL; 11347 struct drxj_data *ext_attr = NULL; 11348 struct drx_common_attr *common_attr = NULL; 11349 u32 driver_version = 0; 11350 struct drxu_code_info ucode_info; 11351 struct drx_cfg_mpeg_output cfg_mpeg_output; 11352 int rc; 11353 enum drx_power_mode power_mode = DRX_POWER_UP; 11354 11355 if ((demod == NULL) || 11356 (demod->my_common_attr == NULL) || 11357 (demod->my_ext_attr == NULL) || 11358 (demod->my_i2c_dev_addr == NULL) || 11359 (demod->my_common_attr->is_opened)) { 11360 return -EINVAL; 11361 } 11362 11363 /* Check arguments */ 11364 if (demod->my_ext_attr == NULL) 11365 return -EINVAL; 11366 11367 dev_addr = demod->my_i2c_dev_addr; 11368 ext_attr = (struct drxj_data *) demod->my_ext_attr; 11369 common_attr = (struct drx_common_attr *) demod->my_common_attr; 11370 11371 rc = ctrl_power_mode(demod, &power_mode); 11372 if (rc != 0) { 11373 pr_err("error %d\n", rc); 11374 goto rw_error; 11375 } 11376 if (power_mode != DRX_POWER_UP) { 11377 rc = -EINVAL; 11378 pr_err("failed to powerup device\n"); 11379 goto rw_error; 11380 } 11381 11382 /* has to be in front of setIqmAf and setOrxNsuAox */ 11383 rc = get_device_capabilities(demod); 11384 if (rc != 0) { 11385 pr_err("error %d\n", rc); 11386 goto rw_error; 11387 } 11388 11389 /* 11390 * Soft reset of sys- and osc-clockdomain 11391 * 11392 * HACK: On windows, it writes a 0x07 here, instead of just 0x03. 11393 * As we didn't load the firmware here yet, we should do the same. 11394 * Btw, this is coherent with DRX-K, where we send reset codes 11395 * for modulation (OFTM, in DRX-k), SYS and OSC clock domains. 11396 */ 11397 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_SOFT_RST__A, (0x04 | SIO_CC_SOFT_RST_SYS__M | SIO_CC_SOFT_RST_OSC__M), 0); 11398 if (rc != 0) { 11399 pr_err("error %d\n", rc); 11400 goto rw_error; 11401 } 11402 rc = drxj_dap_write_reg16(dev_addr, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY, 0); 11403 if (rc != 0) { 11404 pr_err("error %d\n", rc); 11405 goto rw_error; 11406 } 11407 msleep(1); 11408 11409 /* TODO first make sure that everything keeps working before enabling this */ 11410 /* PowerDownAnalogBlocks() */ 11411 rc = drxj_dap_write_reg16(dev_addr, ATV_TOP_STDBY__A, (~ATV_TOP_STDBY_CVBS_STDBY_A2_ACTIVE) | ATV_TOP_STDBY_SIF_STDBY_STANDBY, 0); 11412 if (rc != 0) { 11413 pr_err("error %d\n", rc); 11414 goto rw_error; 11415 } 11416 11417 rc = set_iqm_af(demod, false); 11418 if (rc != 0) { 11419 pr_err("error %d\n", rc); 11420 goto rw_error; 11421 } 11422 rc = set_orx_nsu_aox(demod, false); 11423 if (rc != 0) { 11424 pr_err("error %d\n", rc); 11425 goto rw_error; 11426 } 11427 11428 rc = init_hi(demod); 11429 if (rc != 0) { 11430 pr_err("error %d\n", rc); 11431 goto rw_error; 11432 } 11433 11434 /* disable mpegoutput pins */ 11435 memcpy(&cfg_mpeg_output, &common_attr->mpeg_cfg, sizeof(cfg_mpeg_output)); 11436 cfg_mpeg_output.enable_mpeg_output = false; 11437 11438 rc = ctrl_set_cfg_mpeg_output(demod, &cfg_mpeg_output); 11439 if (rc != 0) { 11440 pr_err("error %d\n", rc); 11441 goto rw_error; 11442 } 11443 /* Stop AUD Inform SetAudio it will need to do all setting */ 11444 rc = power_down_aud(demod); 11445 if (rc != 0) { 11446 pr_err("error %d\n", rc); 11447 goto rw_error; 11448 } 11449 /* Stop SCU */ 11450 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP, 0); 11451 if (rc != 0) { 11452 pr_err("error %d\n", rc); 11453 goto rw_error; 11454 } 11455 11456 /* Upload microcode */ 11457 if (common_attr->microcode_file != NULL) { 11458 /* Dirty trick to use common ucode upload & verify, 11459 pretend device is already open */ 11460 common_attr->is_opened = true; 11461 ucode_info.mc_file = common_attr->microcode_file; 11462 11463 if (DRX_ISPOWERDOWNMODE(demod->my_common_attr->current_power_mode)) { 11464 pr_err("Should powerup before loading the firmware."); 11465 return -EINVAL; 11466 } 11467 11468 rc = drx_ctrl_u_code(demod, &ucode_info, UCODE_UPLOAD); 11469 if (rc != 0) { 11470 pr_err("error %d while uploading the firmware\n", rc); 11471 goto rw_error; 11472 } 11473 if (common_attr->verify_microcode == true) { 11474 rc = drx_ctrl_u_code(demod, &ucode_info, UCODE_VERIFY); 11475 if (rc != 0) { 11476 pr_err("error %d while verifying the firmware\n", 11477 rc); 11478 goto rw_error; 11479 } 11480 } 11481 common_attr->is_opened = false; 11482 } 11483 11484 /* Run SCU for a little while to initialize microcode version numbers */ 11485 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE, 0); 11486 if (rc != 0) { 11487 pr_err("error %d\n", rc); 11488 goto rw_error; 11489 } 11490 11491 /* Initialize scan timeout */ 11492 common_attr->scan_demod_lock_timeout = DRXJ_SCAN_TIMEOUT; 11493 common_attr->scan_desired_lock = DRX_LOCKED; 11494 11495 drxj_reset_mode(ext_attr); 11496 ext_attr->standard = DRX_STANDARD_UNKNOWN; 11497 11498 rc = smart_ant_init(demod); 11499 if (rc != 0) { 11500 pr_err("error %d\n", rc); 11501 goto rw_error; 11502 } 11503 11504 /* Stamp driver version number in SCU data RAM in BCD code 11505 Done to enable field application engineers to retrieve drxdriver version 11506 via I2C from SCU RAM 11507 */ 11508 driver_version = (VERSION_MAJOR / 100) % 10; 11509 driver_version <<= 4; 11510 driver_version += (VERSION_MAJOR / 10) % 10; 11511 driver_version <<= 4; 11512 driver_version += (VERSION_MAJOR % 10); 11513 driver_version <<= 4; 11514 driver_version += (VERSION_MINOR % 10); 11515 driver_version <<= 4; 11516 driver_version += (VERSION_PATCH / 1000) % 10; 11517 driver_version <<= 4; 11518 driver_version += (VERSION_PATCH / 100) % 10; 11519 driver_version <<= 4; 11520 driver_version += (VERSION_PATCH / 10) % 10; 11521 driver_version <<= 4; 11522 driver_version += (VERSION_PATCH % 10); 11523 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_DRIVER_VER_HI__A, (u16)(driver_version >> 16), 0); 11524 if (rc != 0) { 11525 pr_err("error %d\n", rc); 11526 goto rw_error; 11527 } 11528 rc = drxj_dap_write_reg16(dev_addr, SCU_RAM_DRIVER_VER_LO__A, (u16)(driver_version & 0xFFFF), 0); 11529 if (rc != 0) { 11530 pr_err("error %d\n", rc); 11531 goto rw_error; 11532 } 11533 11534 rc = ctrl_set_oob(demod, NULL); 11535 if (rc != 0) { 11536 pr_err("error %d\n", rc); 11537 goto rw_error; 11538 } 11539 11540 /* refresh the audio data structure with default */ 11541 ext_attr->aud_data = drxj_default_aud_data_g; 11542 11543 demod->my_common_attr->is_opened = true; 11544 drxj_set_lna_state(demod, false); 11545 return 0; 11546 rw_error: 11547 common_attr->is_opened = false; 11548 return rc; 11549 } 11550 11551 /*============================================================================*/ 11552 /* 11553 * \fn drxj_close() 11554 * \brief Close the demod instance, power down the device 11555 * \return Status_t Return status. 11556 * 11557 */ 11558 static int drxj_close(struct drx_demod_instance *demod) 11559 { 11560 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 11561 int rc; 11562 enum drx_power_mode power_mode = DRX_POWER_UP; 11563 11564 if ((demod->my_common_attr == NULL) || 11565 (demod->my_ext_attr == NULL) || 11566 (demod->my_i2c_dev_addr == NULL) || 11567 (!demod->my_common_attr->is_opened)) { 11568 return -EINVAL; 11569 } 11570 11571 /* power up */ 11572 rc = ctrl_power_mode(demod, &power_mode); 11573 if (rc != 0) { 11574 pr_err("error %d\n", rc); 11575 goto rw_error; 11576 } 11577 11578 rc = drxj_dap_write_reg16(dev_addr, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE, 0); 11579 if (rc != 0) { 11580 pr_err("error %d\n", rc); 11581 goto rw_error; 11582 } 11583 power_mode = DRX_POWER_DOWN; 11584 rc = ctrl_power_mode(demod, &power_mode); 11585 if (rc != 0) { 11586 pr_err("error %d\n", rc); 11587 goto rw_error; 11588 } 11589 11590 DRX_ATTR_ISOPENED(demod) = false; 11591 11592 return 0; 11593 rw_error: 11594 DRX_ATTR_ISOPENED(demod) = false; 11595 11596 return rc; 11597 } 11598 11599 /* 11600 * Microcode related functions 11601 */ 11602 11603 /* 11604 * drx_u_code_compute_crc - Compute CRC of block of microcode data. 11605 * @block_data: Pointer to microcode data. 11606 * @nr_words: Size of microcode block (number of 16 bits words). 11607 * 11608 * returns The computed CRC residue. 11609 */ 11610 static u16 drx_u_code_compute_crc(u8 *block_data, u16 nr_words) 11611 { 11612 u16 i = 0; 11613 u16 j = 0; 11614 u32 crc_word = 0; 11615 u32 carry = 0; 11616 11617 while (i < nr_words) { 11618 crc_word |= (u32)be16_to_cpu(*(__be16 *)(block_data)); 11619 for (j = 0; j < 16; j++) { 11620 crc_word <<= 1; 11621 if (carry != 0) 11622 crc_word ^= 0x80050000UL; 11623 carry = crc_word & 0x80000000UL; 11624 } 11625 i++; 11626 block_data += (sizeof(u16)); 11627 } 11628 return (u16)(crc_word >> 16); 11629 } 11630 11631 /* 11632 * drx_check_firmware - checks if the loaded firmware is valid 11633 * 11634 * @demod: demod structure 11635 * @mc_data: pointer to the start of the firmware 11636 * @size: firmware size 11637 */ 11638 static int drx_check_firmware(struct drx_demod_instance *demod, u8 *mc_data, 11639 unsigned size) 11640 { 11641 struct drxu_code_block_hdr block_hdr; 11642 int i; 11643 unsigned count = 2 * sizeof(u16); 11644 u32 mc_dev_type, mc_version, mc_base_version; 11645 u16 mc_nr_of_blks = be16_to_cpu(*(__be16 *)(mc_data + sizeof(u16))); 11646 11647 /* 11648 * Scan microcode blocks first for version info 11649 * and firmware check 11650 */ 11651 11652 /* Clear version block */ 11653 DRX_ATTR_MCRECORD(demod).aux_type = 0; 11654 DRX_ATTR_MCRECORD(demod).mc_dev_type = 0; 11655 DRX_ATTR_MCRECORD(demod).mc_version = 0; 11656 DRX_ATTR_MCRECORD(demod).mc_base_version = 0; 11657 11658 for (i = 0; i < mc_nr_of_blks; i++) { 11659 if (count + 3 * sizeof(u16) + sizeof(u32) > size) 11660 goto eof; 11661 11662 /* Process block header */ 11663 block_hdr.addr = be32_to_cpu(*(__be32 *)(mc_data + count)); 11664 count += sizeof(u32); 11665 block_hdr.size = be16_to_cpu(*(__be16 *)(mc_data + count)); 11666 count += sizeof(u16); 11667 block_hdr.flags = be16_to_cpu(*(__be16 *)(mc_data + count)); 11668 count += sizeof(u16); 11669 block_hdr.CRC = be16_to_cpu(*(__be16 *)(mc_data + count)); 11670 count += sizeof(u16); 11671 11672 pr_debug("%u: addr %u, size %u, flags 0x%04x, CRC 0x%04x\n", 11673 count, block_hdr.addr, block_hdr.size, block_hdr.flags, 11674 block_hdr.CRC); 11675 11676 if (block_hdr.flags & 0x8) { 11677 u8 *auxblk = ((void *)mc_data) + block_hdr.addr; 11678 u16 auxtype; 11679 11680 if (block_hdr.addr + sizeof(u16) > size) 11681 goto eof; 11682 11683 auxtype = be16_to_cpu(*(__be16 *)(auxblk)); 11684 11685 /* Aux block. Check type */ 11686 if (DRX_ISMCVERTYPE(auxtype)) { 11687 if (block_hdr.addr + 2 * sizeof(u16) + 2 * sizeof (u32) > size) 11688 goto eof; 11689 11690 auxblk += sizeof(u16); 11691 mc_dev_type = be32_to_cpu(*(__be32 *)(auxblk)); 11692 auxblk += sizeof(u32); 11693 mc_version = be32_to_cpu(*(__be32 *)(auxblk)); 11694 auxblk += sizeof(u32); 11695 mc_base_version = be32_to_cpu(*(__be32 *)(auxblk)); 11696 11697 DRX_ATTR_MCRECORD(demod).aux_type = auxtype; 11698 DRX_ATTR_MCRECORD(demod).mc_dev_type = mc_dev_type; 11699 DRX_ATTR_MCRECORD(demod).mc_version = mc_version; 11700 DRX_ATTR_MCRECORD(demod).mc_base_version = mc_base_version; 11701 11702 pr_info("Firmware dev %x, ver %x, base ver %x\n", 11703 mc_dev_type, mc_version, mc_base_version); 11704 11705 } 11706 } else if (count + block_hdr.size * sizeof(u16) > size) 11707 goto eof; 11708 11709 count += block_hdr.size * sizeof(u16); 11710 } 11711 return 0; 11712 eof: 11713 pr_err("Firmware is truncated at pos %u/%u\n", count, size); 11714 return -EINVAL; 11715 } 11716 11717 /* 11718 * drx_ctrl_u_code - Handle microcode upload or verify. 11719 * @dev_addr: Address of device. 11720 * @mc_info: Pointer to information about microcode data. 11721 * @action: Either UCODE_UPLOAD or UCODE_VERIFY 11722 * 11723 * This function returns: 11724 * 0: 11725 * - In case of UCODE_UPLOAD: code is successfully uploaded. 11726 * - In case of UCODE_VERIFY: image on device is equal to 11727 * image provided to this control function. 11728 * -EIO: 11729 * - In case of UCODE_UPLOAD: I2C error. 11730 * - In case of UCODE_VERIFY: I2C error or image on device 11731 * is not equal to image provided to this control function. 11732 * -EINVAL: 11733 * - Invalid arguments. 11734 * - Provided image is corrupt 11735 */ 11736 static int drx_ctrl_u_code(struct drx_demod_instance *demod, 11737 struct drxu_code_info *mc_info, 11738 enum drxu_code_action action) 11739 { 11740 struct i2c_device_addr *dev_addr = demod->my_i2c_dev_addr; 11741 int rc; 11742 u16 i = 0; 11743 u16 mc_nr_of_blks = 0; 11744 u16 mc_magic_word = 0; 11745 const u8 *mc_data_init = NULL; 11746 u8 *mc_data = NULL; 11747 unsigned size; 11748 char *mc_file; 11749 11750 /* Check arguments */ 11751 if (!mc_info || !mc_info->mc_file) 11752 return -EINVAL; 11753 11754 mc_file = mc_info->mc_file; 11755 11756 if (!demod->firmware) { 11757 const struct firmware *fw = NULL; 11758 11759 rc = request_firmware(&fw, mc_file, demod->i2c->dev.parent); 11760 if (rc < 0) { 11761 pr_err("Couldn't read firmware %s\n", mc_file); 11762 return rc; 11763 } 11764 demod->firmware = fw; 11765 11766 if (demod->firmware->size < 2 * sizeof(u16)) { 11767 rc = -EINVAL; 11768 pr_err("Firmware is too short!\n"); 11769 goto release; 11770 } 11771 11772 pr_info("Firmware %s, size %zu\n", 11773 mc_file, demod->firmware->size); 11774 } 11775 11776 mc_data_init = demod->firmware->data; 11777 size = demod->firmware->size; 11778 11779 mc_data = (void *)mc_data_init; 11780 /* Check data */ 11781 mc_magic_word = be16_to_cpu(*(__be16 *)(mc_data)); 11782 mc_data += sizeof(u16); 11783 mc_nr_of_blks = be16_to_cpu(*(__be16 *)(mc_data)); 11784 mc_data += sizeof(u16); 11785 11786 if ((mc_magic_word != DRX_UCODE_MAGIC_WORD) || (mc_nr_of_blks == 0)) { 11787 rc = -EINVAL; 11788 pr_err("Firmware magic word doesn't match\n"); 11789 goto release; 11790 } 11791 11792 if (action == UCODE_UPLOAD) { 11793 rc = drx_check_firmware(demod, (u8 *)mc_data_init, size); 11794 if (rc) 11795 goto release; 11796 pr_info("Uploading firmware %s\n", mc_file); 11797 } else { 11798 pr_info("Verifying if firmware upload was ok.\n"); 11799 } 11800 11801 /* Process microcode blocks */ 11802 for (i = 0; i < mc_nr_of_blks; i++) { 11803 struct drxu_code_block_hdr block_hdr; 11804 u16 mc_block_nr_bytes = 0; 11805 11806 /* Process block header */ 11807 block_hdr.addr = be32_to_cpu(*(__be32 *)(mc_data)); 11808 mc_data += sizeof(u32); 11809 block_hdr.size = be16_to_cpu(*(__be16 *)(mc_data)); 11810 mc_data += sizeof(u16); 11811 block_hdr.flags = be16_to_cpu(*(__be16 *)(mc_data)); 11812 mc_data += sizeof(u16); 11813 block_hdr.CRC = be16_to_cpu(*(__be16 *)(mc_data)); 11814 mc_data += sizeof(u16); 11815 11816 pr_debug("%zd: addr %u, size %u, flags 0x%04x, CRC 0x%04x\n", 11817 (mc_data - mc_data_init), block_hdr.addr, 11818 block_hdr.size, block_hdr.flags, block_hdr.CRC); 11819 11820 /* Check block header on: 11821 - data larger than 64Kb 11822 - if CRC enabled check CRC 11823 */ 11824 if ((block_hdr.size > 0x7FFF) || 11825 (((block_hdr.flags & DRX_UCODE_CRC_FLAG) != 0) && 11826 (block_hdr.CRC != drx_u_code_compute_crc(mc_data, block_hdr.size))) 11827 ) { 11828 /* Wrong data ! */ 11829 rc = -EINVAL; 11830 pr_err("firmware CRC is wrong\n"); 11831 goto release; 11832 } 11833 11834 if (!block_hdr.size) 11835 continue; 11836 11837 mc_block_nr_bytes = block_hdr.size * ((u16) sizeof(u16)); 11838 11839 /* Perform the desired action */ 11840 switch (action) { 11841 case UCODE_UPLOAD: /* Upload microcode */ 11842 if (drxdap_fasi_write_block(dev_addr, 11843 block_hdr.addr, 11844 mc_block_nr_bytes, 11845 mc_data, 0x0000)) { 11846 rc = -EIO; 11847 pr_err("error writing firmware at pos %zd\n", 11848 mc_data - mc_data_init); 11849 goto release; 11850 } 11851 break; 11852 case UCODE_VERIFY: { /* Verify uploaded microcode */ 11853 int result = 0; 11854 u8 mc_data_buffer[DRX_UCODE_MAX_BUF_SIZE]; 11855 u32 bytes_to_comp = 0; 11856 u32 bytes_left = mc_block_nr_bytes; 11857 u32 curr_addr = block_hdr.addr; 11858 u8 *curr_ptr = mc_data; 11859 11860 while (bytes_left != 0) { 11861 if (bytes_left > DRX_UCODE_MAX_BUF_SIZE) 11862 bytes_to_comp = DRX_UCODE_MAX_BUF_SIZE; 11863 else 11864 bytes_to_comp = bytes_left; 11865 11866 if (drxdap_fasi_read_block(dev_addr, 11867 curr_addr, 11868 (u16)bytes_to_comp, 11869 (u8 *)mc_data_buffer, 11870 0x0000)) { 11871 pr_err("error reading firmware at pos %zd\n", 11872 mc_data - mc_data_init); 11873 return -EIO; 11874 } 11875 11876 result = memcmp(curr_ptr, mc_data_buffer, 11877 bytes_to_comp); 11878 11879 if (result) { 11880 pr_err("error verifying firmware at pos %zd\n", 11881 mc_data - mc_data_init); 11882 return -EIO; 11883 } 11884 11885 curr_addr += ((dr_xaddr_t)(bytes_to_comp / 2)); 11886 curr_ptr =&(curr_ptr[bytes_to_comp]); 11887 bytes_left -=((u32) bytes_to_comp); 11888 } 11889 break; 11890 } 11891 default: 11892 return -EINVAL; 11893 11894 } 11895 mc_data += mc_block_nr_bytes; 11896 } 11897 11898 return 0; 11899 11900 release: 11901 release_firmware(demod->firmware); 11902 demod->firmware = NULL; 11903 11904 return rc; 11905 } 11906 11907 /* caller is expected to check if lna is supported before enabling */ 11908 static int drxj_set_lna_state(struct drx_demod_instance *demod, bool state) 11909 { 11910 struct drxuio_cfg uio_cfg; 11911 struct drxuio_data uio_data; 11912 int result; 11913 11914 uio_cfg.uio = DRX_UIO1; 11915 uio_cfg.mode = DRX_UIO_MODE_READWRITE; 11916 /* Configure user-I/O #3: enable read/write */ 11917 result = ctrl_set_uio_cfg(demod, &uio_cfg); 11918 if (result) { 11919 pr_err("Failed to setup LNA GPIO!\n"); 11920 return result; 11921 } 11922 11923 uio_data.uio = DRX_UIO1; 11924 uio_data.value = state; 11925 result = ctrl_uio_write(demod, &uio_data); 11926 if (result != 0) { 11927 pr_err("Failed to %sable LNA!\n", 11928 state ? "en" : "dis"); 11929 return result; 11930 } 11931 return 0; 11932 } 11933 11934 /* 11935 * The Linux DVB Driver for Micronas DRX39xx family (drx3933j) 11936 * 11937 * Written by Devin Heitmueller <devin.heitmueller@kernellabs.com> 11938 */ 11939 11940 static int drx39xxj_set_powerstate(struct dvb_frontend *fe, int enable) 11941 { 11942 struct drx39xxj_state *state = fe->demodulator_priv; 11943 struct drx_demod_instance *demod = state->demod; 11944 int result; 11945 enum drx_power_mode power_mode; 11946 11947 if (enable) 11948 power_mode = DRX_POWER_UP; 11949 else 11950 power_mode = DRX_POWER_DOWN; 11951 11952 result = ctrl_power_mode(demod, &power_mode); 11953 if (result != 0) { 11954 pr_err("Power state change failed\n"); 11955 return 0; 11956 } 11957 11958 return 0; 11959 } 11960 11961 static int drx39xxj_read_status(struct dvb_frontend *fe, enum fe_status *status) 11962 { 11963 struct drx39xxj_state *state = fe->demodulator_priv; 11964 struct drx_demod_instance *demod = state->demod; 11965 int result; 11966 enum drx_lock_status lock_status; 11967 11968 *status = 0; 11969 11970 result = ctrl_lock_status(demod, &lock_status); 11971 if (result != 0) { 11972 pr_err("drx39xxj: could not get lock status!\n"); 11973 *status = 0; 11974 } 11975 11976 switch (lock_status) { 11977 case DRX_NEVER_LOCK: 11978 *status = 0; 11979 pr_err("drx says NEVER_LOCK\n"); 11980 break; 11981 case DRX_NOT_LOCKED: 11982 *status = 0; 11983 break; 11984 case DRX_LOCK_STATE_1: 11985 case DRX_LOCK_STATE_2: 11986 case DRX_LOCK_STATE_3: 11987 case DRX_LOCK_STATE_4: 11988 case DRX_LOCK_STATE_5: 11989 case DRX_LOCK_STATE_6: 11990 case DRX_LOCK_STATE_7: 11991 case DRX_LOCK_STATE_8: 11992 case DRX_LOCK_STATE_9: 11993 *status = FE_HAS_SIGNAL 11994 | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC; 11995 break; 11996 case DRX_LOCKED: 11997 *status = FE_HAS_SIGNAL 11998 | FE_HAS_CARRIER 11999 | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; 12000 break; 12001 default: 12002 pr_err("Lock state unknown %d\n", lock_status); 12003 } 12004 ctrl_sig_quality(demod, lock_status); 12005 12006 return 0; 12007 } 12008 12009 static int drx39xxj_read_ber(struct dvb_frontend *fe, u32 *ber) 12010 { 12011 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12012 12013 if (p->pre_bit_error.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12014 *ber = 0; 12015 return 0; 12016 } 12017 12018 if (!p->pre_bit_count.stat[0].uvalue) { 12019 if (!p->pre_bit_error.stat[0].uvalue) 12020 *ber = 0; 12021 else 12022 *ber = 1000000; 12023 } else { 12024 *ber = frac_times1e6(p->pre_bit_error.stat[0].uvalue, 12025 p->pre_bit_count.stat[0].uvalue); 12026 } 12027 return 0; 12028 } 12029 12030 static int drx39xxj_read_signal_strength(struct dvb_frontend *fe, 12031 u16 *strength) 12032 { 12033 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12034 12035 if (p->strength.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12036 *strength = 0; 12037 return 0; 12038 } 12039 12040 *strength = p->strength.stat[0].uvalue; 12041 return 0; 12042 } 12043 12044 static int drx39xxj_read_snr(struct dvb_frontend *fe, u16 *snr) 12045 { 12046 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12047 u64 tmp64; 12048 12049 if (p->cnr.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12050 *snr = 0; 12051 return 0; 12052 } 12053 12054 tmp64 = p->cnr.stat[0].svalue; 12055 do_div(tmp64, 10); 12056 *snr = tmp64; 12057 return 0; 12058 } 12059 12060 static int drx39xxj_read_ucblocks(struct dvb_frontend *fe, u32 *ucb) 12061 { 12062 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12063 12064 if (p->block_error.stat[0].scale == FE_SCALE_NOT_AVAILABLE) { 12065 *ucb = 0; 12066 return 0; 12067 } 12068 12069 *ucb = p->block_error.stat[0].uvalue; 12070 return 0; 12071 } 12072 12073 static int drx39xxj_set_frontend(struct dvb_frontend *fe) 12074 { 12075 #ifdef DJH_DEBUG 12076 int i; 12077 #endif 12078 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 12079 struct drx39xxj_state *state = fe->demodulator_priv; 12080 struct drx_demod_instance *demod = state->demod; 12081 enum drx_standard standard = DRX_STANDARD_8VSB; 12082 struct drx_channel channel; 12083 int result; 12084 static const struct drx_channel def_channel = { 12085 /* frequency */ 0, 12086 /* bandwidth */ DRX_BANDWIDTH_6MHZ, 12087 /* mirror */ DRX_MIRROR_NO, 12088 /* constellation */ DRX_CONSTELLATION_AUTO, 12089 /* hierarchy */ DRX_HIERARCHY_UNKNOWN, 12090 /* priority */ DRX_PRIORITY_UNKNOWN, 12091 /* coderate */ DRX_CODERATE_UNKNOWN, 12092 /* guard */ DRX_GUARD_UNKNOWN, 12093 /* fftmode */ DRX_FFTMODE_UNKNOWN, 12094 /* classification */ DRX_CLASSIFICATION_AUTO, 12095 /* symbolrate */ 5057000, 12096 /* interleavemode */ DRX_INTERLEAVEMODE_UNKNOWN, 12097 /* ldpc */ DRX_LDPC_UNKNOWN, 12098 /* carrier */ DRX_CARRIER_UNKNOWN, 12099 /* frame mode */ DRX_FRAMEMODE_UNKNOWN 12100 }; 12101 u32 constellation = DRX_CONSTELLATION_AUTO; 12102 12103 /* Bring the demod out of sleep */ 12104 drx39xxj_set_powerstate(fe, 1); 12105 12106 if (fe->ops.tuner_ops.set_params) { 12107 u32 int_freq; 12108 12109 if (fe->ops.i2c_gate_ctrl) 12110 fe->ops.i2c_gate_ctrl(fe, 1); 12111 12112 /* Set tuner to desired frequency and standard */ 12113 fe->ops.tuner_ops.set_params(fe); 12114 12115 /* Use the tuner's IF */ 12116 if (fe->ops.tuner_ops.get_if_frequency) { 12117 fe->ops.tuner_ops.get_if_frequency(fe, &int_freq); 12118 demod->my_common_attr->intermediate_freq = int_freq / 1000; 12119 } 12120 12121 if (fe->ops.i2c_gate_ctrl) 12122 fe->ops.i2c_gate_ctrl(fe, 0); 12123 } 12124 12125 switch (p->delivery_system) { 12126 case SYS_ATSC: 12127 standard = DRX_STANDARD_8VSB; 12128 break; 12129 case SYS_DVBC_ANNEX_B: 12130 standard = DRX_STANDARD_ITU_B; 12131 12132 switch (p->modulation) { 12133 case QAM_64: 12134 constellation = DRX_CONSTELLATION_QAM64; 12135 break; 12136 case QAM_256: 12137 constellation = DRX_CONSTELLATION_QAM256; 12138 break; 12139 default: 12140 constellation = DRX_CONSTELLATION_AUTO; 12141 break; 12142 } 12143 break; 12144 default: 12145 return -EINVAL; 12146 } 12147 /* Set the standard (will be powered up if necessary */ 12148 result = ctrl_set_standard(demod, &standard); 12149 if (result != 0) { 12150 pr_err("Failed to set standard! result=%02x\n", 12151 result); 12152 return -EINVAL; 12153 } 12154 12155 /* set channel parameters */ 12156 channel = def_channel; 12157 channel.frequency = p->frequency / 1000; 12158 channel.bandwidth = DRX_BANDWIDTH_6MHZ; 12159 channel.constellation = constellation; 12160 12161 /* program channel */ 12162 result = ctrl_set_channel(demod, &channel); 12163 if (result != 0) { 12164 pr_err("Failed to set channel!\n"); 12165 return -EINVAL; 12166 } 12167 /* Just for giggles, let's shut off the LNA again.... */ 12168 drxj_set_lna_state(demod, false); 12169 12170 /* After set_frontend, except for strength, stats aren't available */ 12171 p->strength.stat[0].scale = FE_SCALE_RELATIVE; 12172 12173 return 0; 12174 } 12175 12176 static int drx39xxj_sleep(struct dvb_frontend *fe) 12177 { 12178 /* power-down the demodulator */ 12179 return drx39xxj_set_powerstate(fe, 0); 12180 } 12181 12182 static int drx39xxj_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) 12183 { 12184 struct drx39xxj_state *state = fe->demodulator_priv; 12185 struct drx_demod_instance *demod = state->demod; 12186 bool i2c_gate_state; 12187 int result; 12188 12189 #ifdef DJH_DEBUG 12190 pr_debug("i2c gate call: enable=%d state=%d\n", enable, 12191 state->i2c_gate_open); 12192 #endif 12193 12194 if (enable) 12195 i2c_gate_state = true; 12196 else 12197 i2c_gate_state = false; 12198 12199 if (state->i2c_gate_open == enable) { 12200 /* We're already in the desired state */ 12201 return 0; 12202 } 12203 12204 result = ctrl_i2c_bridge(demod, &i2c_gate_state); 12205 if (result != 0) { 12206 pr_err("drx39xxj: could not open i2c gate [%d]\n", 12207 result); 12208 dump_stack(); 12209 } else { 12210 state->i2c_gate_open = enable; 12211 } 12212 return 0; 12213 } 12214 12215 static int drx39xxj_init(struct dvb_frontend *fe) 12216 { 12217 struct drx39xxj_state *state = fe->demodulator_priv; 12218 struct drx_demod_instance *demod = state->demod; 12219 int rc = 0; 12220 12221 if (fe->exit == DVB_FE_DEVICE_RESUME) { 12222 /* so drxj_open() does what it needs to do */ 12223 demod->my_common_attr->is_opened = false; 12224 rc = drxj_open(demod); 12225 if (rc != 0) 12226 pr_err("drx39xxj_init(): DRX open failed rc=%d!\n", rc); 12227 } else 12228 drx39xxj_set_powerstate(fe, 1); 12229 12230 return rc; 12231 } 12232 12233 static int drx39xxj_set_lna(struct dvb_frontend *fe) 12234 { 12235 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 12236 struct drx39xxj_state *state = fe->demodulator_priv; 12237 struct drx_demod_instance *demod = state->demod; 12238 struct drxj_data *ext_attr = demod->my_ext_attr; 12239 12240 if (c->lna) { 12241 if (!ext_attr->has_lna) { 12242 pr_err("LNA is not supported on this device!\n"); 12243 return -EINVAL; 12244 12245 } 12246 } 12247 12248 return drxj_set_lna_state(demod, c->lna); 12249 } 12250 12251 static int drx39xxj_get_tune_settings(struct dvb_frontend *fe, 12252 struct dvb_frontend_tune_settings *tune) 12253 { 12254 tune->min_delay_ms = 1000; 12255 return 0; 12256 } 12257 12258 static void drx39xxj_release(struct dvb_frontend *fe) 12259 { 12260 struct drx39xxj_state *state = fe->demodulator_priv; 12261 struct drx_demod_instance *demod = state->demod; 12262 12263 /* if device is removed don't access it */ 12264 if (fe->exit != DVB_FE_DEVICE_REMOVED) 12265 drxj_close(demod); 12266 12267 kfree(demod->my_ext_attr); 12268 kfree(demod->my_common_attr); 12269 kfree(demod->my_i2c_dev_addr); 12270 release_firmware(demod->firmware); 12271 kfree(demod); 12272 kfree(state); 12273 } 12274 12275 static const struct dvb_frontend_ops drx39xxj_ops; 12276 12277 struct dvb_frontend *drx39xxj_attach(struct i2c_adapter *i2c) 12278 { 12279 struct drx39xxj_state *state = NULL; 12280 struct i2c_device_addr *demod_addr = NULL; 12281 struct drx_common_attr *demod_comm_attr = NULL; 12282 struct drxj_data *demod_ext_attr = NULL; 12283 struct drx_demod_instance *demod = NULL; 12284 struct dtv_frontend_properties *p; 12285 int result; 12286 12287 /* allocate memory for the internal state */ 12288 state = kzalloc(sizeof(struct drx39xxj_state), GFP_KERNEL); 12289 if (state == NULL) 12290 goto error; 12291 12292 demod = kmemdup(&drxj_default_demod_g, 12293 sizeof(struct drx_demod_instance), GFP_KERNEL); 12294 if (demod == NULL) 12295 goto error; 12296 12297 demod_addr = kmemdup(&drxj_default_addr_g, 12298 sizeof(struct i2c_device_addr), GFP_KERNEL); 12299 if (demod_addr == NULL) 12300 goto error; 12301 12302 demod_comm_attr = kmemdup(&drxj_default_comm_attr_g, 12303 sizeof(struct drx_common_attr), GFP_KERNEL); 12304 if (demod_comm_attr == NULL) 12305 goto error; 12306 12307 demod_ext_attr = kmemdup(&drxj_data_g, sizeof(struct drxj_data), 12308 GFP_KERNEL); 12309 if (demod_ext_attr == NULL) 12310 goto error; 12311 12312 /* setup the state */ 12313 state->i2c = i2c; 12314 state->demod = demod; 12315 12316 /* setup the demod data */ 12317 demod->my_i2c_dev_addr = demod_addr; 12318 demod->my_common_attr = demod_comm_attr; 12319 demod->my_i2c_dev_addr->user_data = state; 12320 demod->my_common_attr->microcode_file = DRX39XX_MAIN_FIRMWARE; 12321 demod->my_common_attr->verify_microcode = true; 12322 demod->my_common_attr->intermediate_freq = 5000; 12323 demod->my_common_attr->current_power_mode = DRX_POWER_DOWN; 12324 demod->my_ext_attr = demod_ext_attr; 12325 ((struct drxj_data *)demod_ext_attr)->uio_sma_tx_mode = DRX_UIO_MODE_READWRITE; 12326 demod->i2c = i2c; 12327 12328 result = drxj_open(demod); 12329 if (result != 0) { 12330 pr_err("DRX open failed! Aborting\n"); 12331 goto error; 12332 } 12333 12334 /* create dvb_frontend */ 12335 memcpy(&state->frontend.ops, &drx39xxj_ops, 12336 sizeof(struct dvb_frontend_ops)); 12337 12338 state->frontend.demodulator_priv = state; 12339 12340 /* Initialize stats - needed for DVBv5 stats to work */ 12341 p = &state->frontend.dtv_property_cache; 12342 p->strength.len = 1; 12343 p->pre_bit_count.len = 1; 12344 p->pre_bit_error.len = 1; 12345 p->post_bit_count.len = 1; 12346 p->post_bit_error.len = 1; 12347 p->block_count.len = 1; 12348 p->block_error.len = 1; 12349 p->cnr.len = 1; 12350 12351 p->strength.stat[0].scale = FE_SCALE_RELATIVE; 12352 p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12353 p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12354 p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12355 p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12356 p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12357 p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12358 p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; 12359 12360 return &state->frontend; 12361 12362 error: 12363 kfree(demod_ext_attr); 12364 kfree(demod_comm_attr); 12365 kfree(demod_addr); 12366 kfree(demod); 12367 kfree(state); 12368 12369 return NULL; 12370 } 12371 EXPORT_SYMBOL(drx39xxj_attach); 12372 12373 static const struct dvb_frontend_ops drx39xxj_ops = { 12374 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B }, 12375 .info = { 12376 .name = "Micronas DRX39xxj family Frontend", 12377 .frequency_min_hz = 51 * MHz, 12378 .frequency_max_hz = 858 * MHz, 12379 .frequency_stepsize_hz = 62500, 12380 .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB 12381 }, 12382 12383 .init = drx39xxj_init, 12384 .i2c_gate_ctrl = drx39xxj_i2c_gate_ctrl, 12385 .sleep = drx39xxj_sleep, 12386 .set_frontend = drx39xxj_set_frontend, 12387 .get_tune_settings = drx39xxj_get_tune_settings, 12388 .read_status = drx39xxj_read_status, 12389 .read_ber = drx39xxj_read_ber, 12390 .read_signal_strength = drx39xxj_read_signal_strength, 12391 .read_snr = drx39xxj_read_snr, 12392 .read_ucblocks = drx39xxj_read_ucblocks, 12393 .release = drx39xxj_release, 12394 .set_lna = drx39xxj_set_lna, 12395 }; 12396 12397 MODULE_DESCRIPTION("Micronas DRX39xxj Frontend"); 12398 MODULE_AUTHOR("Devin Heitmueller"); 12399 MODULE_LICENSE("GPL"); 12400 MODULE_FIRMWARE(DRX39XX_MAIN_FIRMWARE); 12401