1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Sony CXD2820R demodulator driver
4  *
5  * Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
6  */
7 
8 
9 #ifndef CXD2820R_H
10 #define CXD2820R_H
11 
12 #include <linux/dvb/frontend.h>
13 
14 #define CXD2820R_GPIO_D (0 << 0) /* disable */
15 #define CXD2820R_GPIO_E (1 << 0) /* enable */
16 #define CXD2820R_GPIO_O (0 << 1) /* output */
17 #define CXD2820R_GPIO_I (1 << 1) /* input */
18 #define CXD2820R_GPIO_L (0 << 2) /* output low */
19 #define CXD2820R_GPIO_H (1 << 2) /* output high */
20 
21 #define CXD2820R_TS_SERIAL        0x08
22 #define CXD2820R_TS_SERIAL_MSB    0x28
23 #define CXD2820R_TS_PARALLEL      0x30
24 #define CXD2820R_TS_PARALLEL_MSB  0x70
25 
26 /*
27  * I2C address: 0x6c, 0x6d
28  */
29 
30 /**
31  * struct cxd2820r_platform_data - Platform data for the cxd2820r driver
32  * @ts_mode: TS mode.
33  * @ts_clk_inv: TS clock inverted.
34  * @if_agc_polarity: IF AGC polarity.
35  * @spec_inv: Input spectrum inverted.
36  * @gpio_chip_base: GPIO.
37  * @get_dvb_frontend: Get DVB frontend.
38  */
39 struct cxd2820r_platform_data {
40 	u8 ts_mode;
41 	bool ts_clk_inv;
42 	bool if_agc_polarity;
43 	bool spec_inv;
44 	int **gpio_chip_base;
45 
46 	struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
47 /* private: For legacy media attach wrapper. Do not set value. */
48 	bool attach_in_use;
49 };
50 
51 /**
52  * struct cxd2820r_config - configuration for cxd2020r demod
53  *
54  * @i2c_address: Demodulator I2C address. Driver determines DVB-C slave I2C
55  *		 address automatically from master address.
56  *		 Default: none, must set. Values: 0x6c, 0x6d.
57  * @ts_mode:	TS output mode. Default: none, must set. Values: FIXME?
58  * @ts_clock_inv: TS clock inverted. Default: 0. Values: 0, 1.
59  * @if_agc_polarity: Default: 0. Values: 0, 1
60  * @spec_inv:	Spectrum inversion. Default: 0. Values: 0, 1.
61  */
62 struct cxd2820r_config {
63 	/* Demodulator I2C address.
64 	 * Driver determines DVB-C slave I2C address automatically from master
65 	 * address.
66 	 * Default: none, must set
67 	 * Values: 0x6c, 0x6d
68 	 */
69 	u8 i2c_address;
70 
71 	/* TS output mode.
72 	 * Default: none, must set.
73 	 * Values:
74 	 */
75 	u8 ts_mode;
76 
77 	/* TS clock inverted.
78 	 * Default: 0
79 	 * Values: 0, 1
80 	 */
81 	bool ts_clock_inv;
82 
83 	/* IF AGC polarity.
84 	 * Default: 0
85 	 * Values: 0, 1
86 	 */
87 	bool if_agc_polarity;
88 
89 	/* Spectrum inversion.
90 	 * Default: 0
91 	 * Values: 0, 1
92 	 */
93 	bool spec_inv;
94 };
95 
96 
97 #if IS_REACHABLE(CONFIG_DVB_CXD2820R)
98 /**
99  * cxd2820r_attach - Attach a cxd2820r demod
100  *
101  * @config: pointer to &struct cxd2820r_config with demod configuration.
102  * @i2c: i2c adapter to use.
103  * @gpio_chip_base: if zero, disables GPIO setting. Otherwise, if
104  *		    CONFIG_GPIOLIB is set dynamically allocate
105  *		    gpio base; if is not set, use its value to
106  *		    setup the GPIO pins.
107  *
108  * return: FE pointer on success, NULL on failure.
109  */
110 extern struct dvb_frontend *cxd2820r_attach(
111 	const struct cxd2820r_config *config,
112 	struct i2c_adapter *i2c,
113 	int *gpio_chip_base
114 );
115 #else
116 static inline struct dvb_frontend *cxd2820r_attach(
117 	const struct cxd2820r_config *config,
118 	struct i2c_adapter *i2c,
119 	int *gpio_chip_base
120 )
121 {
122 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
123 	return NULL;
124 }
125 
126 #endif
127 
128 #endif /* CXD2820R_H */
129