1 /*
2  * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
3  *
4  *  Copyright (C) 2001-5, B2C2 inc.
5  *
6  *  GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@posteo.de>
7  *
8  *  This driver is "hard-coded" to be used with the 1st generation of
9  *  Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
10  *  (Panasonic CT10S) is located here, which is actually wrong. Unless there is
11  *  another device with a BCM3510, this is no problem.
12  *
13  *  The driver works also with QAM64 DVB-C, but had an unreasonable high
14  *  UNC. (Tested with the Air2PC ATSC 1st generation)
15  *
16  *  You'll need a firmware for this driver in order to get it running. It is
17  *  called "dvb-fe-bcm3510-01.fw".
18  *
19  * This program is free software; you can redistribute it and/or modify it
20  * under the terms of the GNU General Public License as published by the Free
21  * Software Foundation; either version 2 of the License, or (at your option)
22  * any later version.
23  *
24  * This program is distributed in the hope that it will be useful, but WITHOUT
25  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
26  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
27  * more details.
28  *
29  * You should have received a copy of the GNU General Public License along with
30  * this program; if not, write to the Free Software Foundation, Inc., 675 Mass
31  * Ave, Cambridge, MA 02139, USA.
32  */
33 
34 #include <linux/init.h>
35 #include <linux/module.h>
36 #include <linux/device.h>
37 #include <linux/firmware.h>
38 #include <linux/jiffies.h>
39 #include <linux/string.h>
40 #include <linux/slab.h>
41 #include <linux/mutex.h>
42 
43 #include <media/dvb_frontend.h>
44 #include "bcm3510.h"
45 #include "bcm3510_priv.h"
46 
47 /* Max transfer size done by bcm3510_do_hab_cmd() function */
48 #define MAX_XFER_SIZE	128
49 
50 struct bcm3510_state {
51 
52 	struct i2c_adapter* i2c;
53 	const struct bcm3510_config* config;
54 	struct dvb_frontend frontend;
55 
56 	/* demodulator private data */
57 	struct mutex hab_mutex;
58 	u8 firmware_loaded:1;
59 
60 	unsigned long next_status_check;
61 	unsigned long status_check_interval;
62 	struct bcm3510_hab_cmd_status1 status1;
63 	struct bcm3510_hab_cmd_status2 status2;
64 };
65 
66 static int debug;
67 module_param(debug, int, 0644);
68 MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
69 
70 #define dprintk(level,x...) if (level & debug) printk(x)
71 #define dbufout(b,l,m) {\
72 	    int i; \
73 	    for (i = 0; i < l; i++) \
74 		m("%02x ",b[i]); \
75 }
76 #define deb_info(args...) dprintk(0x01,args)
77 #define deb_i2c(args...)  dprintk(0x02,args)
78 #define deb_hab(args...)  dprintk(0x04,args)
79 
80 /* transfer functions */
81 static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
82 {
83 	u8 b[256];
84 	int err;
85 	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 };
86 
87 	b[0] = reg;
88 	memcpy(&b[1],buf,len);
89 
90 	deb_i2c("i2c wr %02x: ",reg);
91 	dbufout(buf,len,deb_i2c);
92 	deb_i2c("\n");
93 
94 	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
95 
96 		deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n",
97 			__func__, state->config->demod_address, reg,  err);
98 		return -EREMOTEIO;
99 	}
100 
101 	return 0;
102 }
103 
104 static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
105 {
106 	struct i2c_msg msg[] = {
107 		{ .addr = state->config->demod_address, .flags = 0,        .buf = &reg, .len = 1 },
108 		{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf,  .len = len }
109 	};
110 	int err;
111 
112 	memset(buf,0,len);
113 
114 	if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
115 		deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n",
116 			__func__, state->config->demod_address, reg,  err);
117 		return -EREMOTEIO;
118 	}
119 	deb_i2c("i2c rd %02x: ",reg);
120 	dbufout(buf,len,deb_i2c);
121 	deb_i2c("\n");
122 
123 	return 0;
124 }
125 
126 static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v)
127 {
128 	return bcm3510_writebytes(state,reg,&v.raw,1);
129 }
130 
131 static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v)
132 {
133 	return bcm3510_readbytes(state,reg,&v->raw,1);
134 }
135 
136 /* Host Access Buffer transfers */
137 static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len)
138 {
139 	bcm3510_register_value v;
140 	int ret,i;
141 
142 	v.HABADR_a6.HABADR = 0;
143 	if ((ret = bcm3510_writeB(st,0xa6,v)) < 0)
144 		return ret;
145 
146 	for (i = 0; i < len; i++) {
147 		if ((ret = bcm3510_readB(st,0xa7,&v)) < 0)
148 			return ret;
149 		buf[i] = v.HABDATA_a7;
150 	}
151 	return 0;
152 }
153 
154 static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
155 {
156 	bcm3510_register_value v,hab;
157 	int ret,i;
158 	unsigned long t;
159 
160 /* Check if any previous HAB request still needs to be serviced by the
161  * Acquisition Processor before sending new request */
162 	if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
163 		return ret;
164 	if (v.HABSTAT_a8.HABR) {
165 		deb_info("HAB is running already - clearing it.\n");
166 		v.HABSTAT_a8.HABR = 0;
167 		bcm3510_writeB(st,0xa8,v);
168 //		return -EBUSY;
169 	}
170 
171 /* Send the start HAB Address (automatically incremented after write of
172  * HABDATA) and write the HAB Data */
173 	hab.HABADR_a6.HABADR = 0;
174 	if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0)
175 		return ret;
176 
177 	for (i = 0; i < len; i++) {
178 		hab.HABDATA_a7 = buf[i];
179 		if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0)
180 			return ret;
181 	}
182 
183 /* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to
184  * be written) */
185 	v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1;
186 	if ((ret = bcm3510_writeB(st,0xa8,v)) < 0)
187 		return ret;
188 
189 /* Polling method: Wait until the AP finishes processing the HAB request */
190 	t = jiffies + 1*HZ;
191 	while (time_before(jiffies, t)) {
192 		deb_info("waiting for HAB to complete\n");
193 		msleep(10);
194 		if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
195 			return ret;
196 
197 		if (!v.HABSTAT_a8.HABR)
198 			return 0;
199 	}
200 
201 	deb_info("send_request execution timed out.\n");
202 	return -ETIMEDOUT;
203 }
204 
205 static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
206 {
207 	u8 ob[MAX_XFER_SIZE], ib[MAX_XFER_SIZE];
208 	int ret = 0;
209 
210 	if (ilen + 2 > sizeof(ib)) {
211 		deb_hab("do_hab_cmd: ilen=%d is too big!\n", ilen);
212 		return -EINVAL;
213 	}
214 
215 	if (olen + 2 > sizeof(ob)) {
216 		deb_hab("do_hab_cmd: olen=%d is too big!\n", olen);
217 		return -EINVAL;
218 	}
219 
220 	ob[0] = cmd;
221 	ob[1] = msgid;
222 	memcpy(&ob[2],obuf,olen);
223 
224 	deb_hab("hab snd: ");
225 	dbufout(ob,olen+2,deb_hab);
226 	deb_hab("\n");
227 
228 	if (mutex_lock_interruptible(&st->hab_mutex) < 0)
229 		return -EAGAIN;
230 
231 	if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
232 		(ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0)
233 		goto error;
234 
235 	deb_hab("hab get: ");
236 	dbufout(ib,ilen+2,deb_hab);
237 	deb_hab("\n");
238 
239 	memcpy(ibuf,&ib[2],ilen);
240 error:
241 	mutex_unlock(&st->hab_mutex);
242 	return ret;
243 }
244 
245 #if 0
246 /* not needed, we use a semaphore to prevent HAB races */
247 static int bcm3510_is_ap_ready(struct bcm3510_state *st)
248 {
249 	bcm3510_register_value ap,hab;
250 	int ret;
251 
252 	if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 ||
253 		(ret = bcm3510_readB(st,0xa2,&ap) < 0))
254 		return ret;
255 
256 	if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) {
257 		deb_info("AP is busy\n");
258 		return -EBUSY;
259 	}
260 
261 	return 0;
262 }
263 #endif
264 
265 static int bcm3510_bert_reset(struct bcm3510_state *st)
266 {
267 	bcm3510_register_value b;
268 	int ret;
269 
270 	if ((ret = bcm3510_readB(st,0xfa,&b)) < 0)
271 		return ret;
272 
273 	b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
274 	b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b);
275 	b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
276 	b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b);
277 
278 	/* clear residual bit counter TODO  */
279 	return 0;
280 }
281 
282 static int bcm3510_refresh_state(struct bcm3510_state *st)
283 {
284 	if (time_after(jiffies,st->next_status_check)) {
285 		bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1));
286 		bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2));
287 		st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
288 	}
289 	return 0;
290 }
291 
292 static int bcm3510_read_status(struct dvb_frontend *fe, enum fe_status *status)
293 {
294 	struct bcm3510_state* st = fe->demodulator_priv;
295 	bcm3510_refresh_state(st);
296 
297 	*status = 0;
298 	if (st->status1.STATUS1.RECEIVER_LOCK)
299 		*status |= FE_HAS_LOCK | FE_HAS_SYNC;
300 
301 	if (st->status1.STATUS1.FEC_LOCK)
302 		*status |= FE_HAS_VITERBI;
303 
304 	if (st->status1.STATUS1.OUT_PLL_LOCK)
305 		*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
306 
307 	if (*status & FE_HAS_LOCK)
308 		st->status_check_interval = 1500;
309 	else /* more frequently checks if no lock has been achieved yet */
310 		st->status_check_interval = 500;
311 
312 	deb_info("real_status: %02x\n",*status);
313 	return 0;
314 }
315 
316 static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber)
317 {
318 	struct bcm3510_state* st = fe->demodulator_priv;
319 	bcm3510_refresh_state(st);
320 
321 	*ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2;
322 	return 0;
323 }
324 
325 static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc)
326 {
327 	struct bcm3510_state* st = fe->demodulator_priv;
328 	bcm3510_refresh_state(st);
329 	*unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1;
330 	return 0;
331 }
332 
333 static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength)
334 {
335 	struct bcm3510_state* st = fe->demodulator_priv;
336 	s32 t;
337 
338 	bcm3510_refresh_state(st);
339 	t = st->status2.SIGNAL;
340 
341 	if (t > 190)
342 		t = 190;
343 	if (t < 90)
344 		t = 90;
345 
346 	t -= 90;
347 	t = t * 0xff / 100;
348 	/* normalize if necessary */
349 	*strength = (t << 8) | t;
350 	return 0;
351 }
352 
353 static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr)
354 {
355 	struct bcm3510_state* st = fe->demodulator_priv;
356 	bcm3510_refresh_state(st);
357 
358 	*snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8);
359 	return 0;
360 }
361 
362 /* tuner frontend programming */
363 static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
364 {
365 	struct bcm3510_hab_cmd_tune c;
366 	memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune));
367 
368 /* I2C Mode disabled,  set 16 control / Data pairs */
369 	c.length = 0x10;
370 	c.clock_width = 0;
371 /* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to
372  * logic high (as Configuration) */
373 	c.misc = 0x10;
374 /* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
375 	c.TUNCTL_state = 0x40;
376 
377 /* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
378 	c.ctl_dat[0].ctrl.size = BITS_8;
379 	c.ctl_dat[0].data      = 0x80 | bc;
380 
381 /* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */
382 	c.ctl_dat[1].ctrl.size = BITS_8;
383 	c.ctl_dat[1].data      = 4;
384 
385 /* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */
386 	c.ctl_dat[2].ctrl.size = BITS_3;
387 	c.ctl_dat[2].data      = 0x20;
388 
389 /* control CS0 pin, pulse byte ? */
390 	c.ctl_dat[3].ctrl.size = BITS_3;
391 	c.ctl_dat[3].ctrl.clk_off = 1;
392 	c.ctl_dat[3].ctrl.cs0  = 1;
393 	c.ctl_dat[3].data      = 0x40;
394 
395 /* PGM_S18 to PGM_S11 */
396 	c.ctl_dat[4].ctrl.size = BITS_8;
397 	c.ctl_dat[4].data      = n >> 3;
398 
399 /* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */
400 	c.ctl_dat[5].ctrl.size = BITS_8;
401 	c.ctl_dat[5].data      = ((n & 0x7) << 5) | (a >> 2);
402 
403 /* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */
404 	c.ctl_dat[6].ctrl.size = BITS_3;
405 	c.ctl_dat[6].data      = (a << 6) & 0xdf;
406 
407 /* control CS0 pin, pulse byte ? */
408 	c.ctl_dat[7].ctrl.size = BITS_3;
409 	c.ctl_dat[7].ctrl.clk_off = 1;
410 	c.ctl_dat[7].ctrl.cs0  = 1;
411 	c.ctl_dat[7].data      = 0x40;
412 
413 /* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
414 	c.ctl_dat[8].ctrl.size = BITS_8;
415 	c.ctl_dat[8].data      = 0x80;
416 
417 /* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */
418 	c.ctl_dat[9].ctrl.size = BITS_8;
419 	c.ctl_dat[9].data      = 0x10;
420 
421 /* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */
422 	c.ctl_dat[10].ctrl.size = BITS_3;
423 	c.ctl_dat[10].data      = 0x20;
424 
425 /* pulse byte */
426 	c.ctl_dat[11].ctrl.size = BITS_3;
427 	c.ctl_dat[11].ctrl.clk_off = 1;
428 	c.ctl_dat[11].ctrl.cs1  = 1;
429 	c.ctl_dat[11].data      = 0x40;
430 
431 /* PGM_S18 to PGM_S11 */
432 	c.ctl_dat[12].ctrl.size = BITS_8;
433 	c.ctl_dat[12].data      = 0x2a;
434 
435 /* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */
436 	c.ctl_dat[13].ctrl.size = BITS_8;
437 	c.ctl_dat[13].data      = 0x8e;
438 
439 /* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */
440 	c.ctl_dat[14].ctrl.size = BITS_3;
441 	c.ctl_dat[14].data      = 0;
442 
443 /* Pulse Byte */
444 	c.ctl_dat[15].ctrl.size = BITS_3;
445 	c.ctl_dat[15].ctrl.clk_off = 1;
446 	c.ctl_dat[15].ctrl.cs1  = 1;
447 	c.ctl_dat[15].data      = 0x40;
448 
449 	return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0);
450 }
451 
452 static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
453 {
454 	u8 bc,a;
455 	u16 n;
456 	s32 YIntercept,Tfvco1;
457 
458 	freq /= 1000;
459 
460 	deb_info("%dkHz:",freq);
461 	/* set Band Switch */
462 	if (freq <= 168000)
463 		bc = 0x1c;
464 	else if (freq <= 378000)
465 		bc = 0x2c;
466 	else
467 		bc = 0x30;
468 
469 	if (freq >= 470000) {
470 		freq -= 470001;
471 		YIntercept = 18805;
472 	} else if (freq >= 90000) {
473 		freq -= 90001;
474 		YIntercept = 15005;
475 	} else if (freq >= 76000){
476 		freq -= 76001;
477 		YIntercept = 14865;
478 	} else {
479 		freq -= 54001;
480 		YIntercept = 14645;
481 	}
482 
483 	Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10;
484 
485 	n = Tfvco1 >> 6;
486 	a = Tfvco1 & 0x3f;
487 
488 	deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a);
489 	if (n >= 16 && n <= 2047)
490 		return bcm3510_tuner_cmd(st,bc,n,a);
491 
492 	return -EINVAL;
493 }
494 
495 static int bcm3510_set_frontend(struct dvb_frontend *fe)
496 {
497 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
498 	struct bcm3510_state* st = fe->demodulator_priv;
499 	struct bcm3510_hab_cmd_ext_acquire cmd;
500 	struct bcm3510_hab_cmd_bert_control bert;
501 	int ret;
502 
503 	memset(&cmd,0,sizeof(cmd));
504 	switch (c->modulation) {
505 		case QAM_256:
506 			cmd.ACQUIRE0.MODE = 0x1;
507 			cmd.ACQUIRE1.SYM_RATE = 0x1;
508 			cmd.ACQUIRE1.IF_FREQ = 0x1;
509 			break;
510 		case QAM_64:
511 			cmd.ACQUIRE0.MODE = 0x2;
512 			cmd.ACQUIRE1.SYM_RATE = 0x2;
513 			cmd.ACQUIRE1.IF_FREQ = 0x1;
514 			break;
515 #if 0
516 		case QAM_256:
517 			cmd.ACQUIRE0.MODE = 0x3;
518 			break;
519 		case QAM_128:
520 			cmd.ACQUIRE0.MODE = 0x4;
521 			break;
522 		case QAM_64:
523 			cmd.ACQUIRE0.MODE = 0x5;
524 			break;
525 		case QAM_32:
526 			cmd.ACQUIRE0.MODE = 0x6;
527 			break;
528 		case QAM_16:
529 			cmd.ACQUIRE0.MODE = 0x7;
530 			break;
531 #endif
532 		case VSB_8:
533 			cmd.ACQUIRE0.MODE = 0x8;
534 			cmd.ACQUIRE1.SYM_RATE = 0x0;
535 			cmd.ACQUIRE1.IF_FREQ = 0x0;
536 			break;
537 		case VSB_16:
538 			cmd.ACQUIRE0.MODE = 0x9;
539 			cmd.ACQUIRE1.SYM_RATE = 0x0;
540 			cmd.ACQUIRE1.IF_FREQ = 0x0;
541 			break;
542 		default:
543 			return -EINVAL;
544 	}
545 	cmd.ACQUIRE0.OFFSET = 0;
546 	cmd.ACQUIRE0.NTSCSWEEP = 1;
547 	cmd.ACQUIRE0.FA = 1;
548 	cmd.ACQUIRE0.BW = 0;
549 
550 /*	if (enableOffset) {
551 		cmd.IF_OFFSET0 = xx;
552 		cmd.IF_OFFSET1 = xx;
553 
554 		cmd.SYM_OFFSET0 = xx;
555 		cmd.SYM_OFFSET1 = xx;
556 		if (enableNtscSweep) {
557 			cmd.NTSC_OFFSET0;
558 			cmd.NTSC_OFFSET1;
559 		}
560 	} */
561 	bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0);
562 
563 /* doing it with different MSGIDs, data book and source differs */
564 	bert.BE = 0;
565 	bert.unused = 0;
566 	bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0);
567 	bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0);
568 
569 	bcm3510_bert_reset(st);
570 
571 	ret = bcm3510_set_freq(st, c->frequency);
572 	if (ret < 0)
573 		return ret;
574 
575 	memset(&st->status1,0,sizeof(st->status1));
576 	memset(&st->status2,0,sizeof(st->status2));
577 	st->status_check_interval = 500;
578 
579 /* Give the AP some time */
580 	msleep(200);
581 
582 	return 0;
583 }
584 
585 static int bcm3510_sleep(struct dvb_frontend* fe)
586 {
587 	return 0;
588 }
589 
590 static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s)
591 {
592 	s->min_delay_ms = 1000;
593 	s->step_size = 0;
594 	s->max_drift = 0;
595 	return 0;
596 }
597 
598 static void bcm3510_release(struct dvb_frontend* fe)
599 {
600 	struct bcm3510_state* state = fe->demodulator_priv;
601 	kfree(state);
602 }
603 
604 /* firmware download:
605  * firmware file is build up like this:
606  * 16bit addr, 16bit length, 8byte of length
607  */
608 #define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw"
609 
610 static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, const u8 *b,
611 			     u16 len)
612 {
613 	int ret = 0,i;
614 	bcm3510_register_value vH, vL,vD;
615 
616 	vH.MADRH_a9 = addr >> 8;
617 	vL.MADRL_aa = addr;
618 	if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret;
619 	if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret;
620 
621 	for (i = 0; i < len; i++) {
622 		vD.MDATA_ab = b[i];
623 		if ((ret = bcm3510_writeB(st,0xab,vD)) < 0)
624 			return ret;
625 	}
626 
627 	return 0;
628 }
629 
630 static int bcm3510_download_firmware(struct dvb_frontend* fe)
631 {
632 	struct bcm3510_state* st = fe->demodulator_priv;
633 	const struct firmware *fw;
634 	u16 addr,len;
635 	const u8 *b;
636 	int ret,i;
637 
638 	deb_info("requesting firmware\n");
639 	if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) {
640 		err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret);
641 		return ret;
642 	}
643 	deb_info("got firmware: %zu\n", fw->size);
644 
645 	b = fw->data;
646 	for (i = 0; i < fw->size;) {
647 		addr = le16_to_cpu(*((__le16 *)&b[i]));
648 		len  = le16_to_cpu(*((__le16 *)&b[i+2]));
649 		deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
650 		if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
651 			err("firmware download failed: %d\n",ret);
652 			return ret;
653 		}
654 		i += 4 + len;
655 	}
656 	release_firmware(fw);
657 	deb_info("firmware download successfully completed\n");
658 	return 0;
659 }
660 
661 static int bcm3510_check_firmware_version(struct bcm3510_state *st)
662 {
663 	struct bcm3510_hab_cmd_get_version_info ver;
664 	bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver));
665 
666 	deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n",
667 		ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version);
668 
669 	if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION &&
670 		ver.config_version == BCM3510_DEF_CONFIG_VERSION &&
671 		ver.demod_version  == BCM3510_DEF_DEMOD_VERSION)
672 		return 0;
673 
674 	deb_info("version check failed\n");
675 	return -ENODEV;
676 }
677 
678 /* (un)resetting the AP */
679 static int bcm3510_reset(struct bcm3510_state *st)
680 {
681 	int ret;
682 	unsigned long  t;
683 	bcm3510_register_value v;
684 
685 	bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1;
686 	if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
687 		return ret;
688 
689 	t = jiffies + 3*HZ;
690 	while (time_before(jiffies, t)) {
691 		msleep(10);
692 		if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
693 			return ret;
694 
695 		if (v.APSTAT1_a2.RESET)
696 			return 0;
697 	}
698 	deb_info("reset timed out\n");
699 	return -ETIMEDOUT;
700 }
701 
702 static int bcm3510_clear_reset(struct bcm3510_state *st)
703 {
704 	bcm3510_register_value v;
705 	int ret;
706 	unsigned long t;
707 
708 	v.raw = 0;
709 	if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
710 		return ret;
711 
712 	t = jiffies + 3*HZ;
713 	while (time_before(jiffies, t)) {
714 		msleep(10);
715 		if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
716 			return ret;
717 
718 		/* verify that reset is cleared */
719 		if (!v.APSTAT1_a2.RESET)
720 			return 0;
721 	}
722 	deb_info("reset clear timed out\n");
723 	return -ETIMEDOUT;
724 }
725 
726 static int bcm3510_init_cold(struct bcm3510_state *st)
727 {
728 	int ret;
729 	bcm3510_register_value v;
730 
731 	/* read Acquisation Processor status register and check it is not in RUN mode */
732 	if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
733 		return ret;
734 	if (v.APSTAT1_a2.RUN) {
735 		deb_info("AP is already running - firmware already loaded.\n");
736 		return 0;
737 	}
738 
739 	deb_info("reset?\n");
740 	if ((ret = bcm3510_reset(st)) < 0)
741 		return ret;
742 
743 	deb_info("tristate?\n");
744 	/* tri-state */
745 	v.TSTCTL_2e.CTL = 0;
746 	if ((ret = bcm3510_writeB(st,0x2e,v)) < 0)
747 		return ret;
748 
749 	deb_info("firmware?\n");
750 	if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 ||
751 		(ret = bcm3510_clear_reset(st)) < 0)
752 		return ret;
753 
754 	/* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */
755 
756 	return 0;
757 }
758 
759 static int bcm3510_init(struct dvb_frontend* fe)
760 {
761 	struct bcm3510_state* st = fe->demodulator_priv;
762 	bcm3510_register_value j;
763 	struct bcm3510_hab_cmd_set_agc c;
764 	int ret;
765 
766 	if ((ret = bcm3510_readB(st,0xca,&j)) < 0)
767 		return ret;
768 
769 	deb_info("JDEC: %02x\n",j.raw);
770 
771 	switch (j.JDEC_ca.JDEC) {
772 		case JDEC_WAIT_AT_RAM:
773 			deb_info("attempting to download firmware\n");
774 			if ((ret = bcm3510_init_cold(st)) < 0)
775 				return ret;
776 			/* fall-through */
777 		case JDEC_EEPROM_LOAD_WAIT:
778 			deb_info("firmware is loaded\n");
779 			bcm3510_check_firmware_version(st);
780 			break;
781 		default:
782 			return -ENODEV;
783 	}
784 
785 	memset(&c,0,1);
786 	c.SEL = 1;
787 	bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0);
788 
789 	return 0;
790 }
791 
792 
793 static const struct dvb_frontend_ops bcm3510_ops;
794 
795 struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
796 				   struct i2c_adapter *i2c)
797 {
798 	struct bcm3510_state* state = NULL;
799 	int ret;
800 	bcm3510_register_value v;
801 
802 	/* allocate memory for the internal state */
803 	state = kzalloc(sizeof(struct bcm3510_state), GFP_KERNEL);
804 	if (state == NULL)
805 		goto error;
806 
807 	/* setup the state */
808 
809 	state->config = config;
810 	state->i2c = i2c;
811 
812 	/* create dvb_frontend */
813 	memcpy(&state->frontend.ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops));
814 	state->frontend.demodulator_priv = state;
815 
816 	mutex_init(&state->hab_mutex);
817 
818 	if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
819 		goto error;
820 
821 	deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER);
822 
823 	if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */
824 		(v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0))   /* warm */
825 		goto error;
826 
827 	info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER);
828 
829 	bcm3510_reset(state);
830 
831 	return &state->frontend;
832 
833 error:
834 	kfree(state);
835 	return NULL;
836 }
837 EXPORT_SYMBOL(bcm3510_attach);
838 
839 static const struct dvb_frontend_ops bcm3510_ops = {
840 	.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
841 	.info = {
842 		.name = "Broadcom BCM3510 VSB/QAM frontend",
843 		.frequency_min =  54000000,
844 		.frequency_max = 803000000,
845 		/* stepsize is just a guess */
846 		.frequency_stepsize = 0,
847 		.caps =
848 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
849 			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
850 			FE_CAN_8VSB | FE_CAN_16VSB |
851 			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256
852 	},
853 
854 	.release = bcm3510_release,
855 
856 	.init = bcm3510_init,
857 	.sleep = bcm3510_sleep,
858 
859 	.set_frontend = bcm3510_set_frontend,
860 	.get_tune_settings = bcm3510_get_tune_settings,
861 
862 	.read_status = bcm3510_read_status,
863 	.read_ber = bcm3510_read_ber,
864 	.read_signal_strength = bcm3510_read_signal_strength,
865 	.read_snr = bcm3510_read_snr,
866 	.read_ucblocks = bcm3510_read_unc,
867 };
868 
869 MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
870 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
871 MODULE_LICENSE("GPL");
872