1 /*
2 * Support for the Broadcom BCM3510 ATSC demodulator (1st generation Air2PC)
3 *
4 * Copyright (C) 2001-5, B2C2 inc.
5 *
6 * GPL/Linux driver written by Patrick Boettcher <patrick.boettcher@posteo.de>
7 *
8 * This driver is "hard-coded" to be used with the 1st generation of
9 * Technisat/B2C2's Air2PC ATSC PCI/USB cards/boxes. The pll-programming
10 * (Panasonic CT10S) is located here, which is actually wrong. Unless there is
11 * another device with a BCM3510, this is no problem.
12 *
13 * The driver works also with QAM64 DVB-C, but had an unreasonable high
14 * UNC. (Tested with the Air2PC ATSC 1st generation)
15 *
16 * You'll need a firmware for this driver in order to get it running. It is
17 * called "dvb-fe-bcm3510-01.fw".
18 *
19 * This program is free software; you can redistribute it and/or modify it
20 * under the terms of the GNU General Public License as published by the Free
21 * Software Foundation; either version 2 of the License, or (at your option)
22 * any later version.
23 *
24 * This program is distributed in the hope that it will be useful, but WITHOUT
25 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
26 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
27 * more details.
28 *
29 * You should have received a copy of the GNU General Public License along with
30 * this program; if not, write to the Free Software Foundation, Inc., 675 Mass
31 * Ave, Cambridge, MA 02139, USA.
32 */
33
34 #include <linux/init.h>
35 #include <linux/module.h>
36 #include <linux/device.h>
37 #include <linux/firmware.h>
38 #include <linux/jiffies.h>
39 #include <linux/string.h>
40 #include <linux/slab.h>
41 #include <linux/mutex.h>
42
43 #include <media/dvb_frontend.h>
44 #include "bcm3510.h"
45 #include "bcm3510_priv.h"
46
47 /* Max transfer size done by bcm3510_do_hab_cmd() function */
48 #define MAX_XFER_SIZE 128
49
50 struct bcm3510_state {
51
52 struct i2c_adapter* i2c;
53 const struct bcm3510_config* config;
54 struct dvb_frontend frontend;
55
56 /* demodulator private data */
57 struct mutex hab_mutex;
58 u8 firmware_loaded:1;
59
60 unsigned long next_status_check;
61 unsigned long status_check_interval;
62 struct bcm3510_hab_cmd_status1 status1;
63 struct bcm3510_hab_cmd_status2 status2;
64 };
65
66 static int debug;
67 module_param(debug, int, 0644);
68 MODULE_PARM_DESC(debug, "set debugging level (1=info,2=i2c (|-able)).");
69
70 #define dprintk(level,x...) if (level & debug) printk(x)
71 #define dbufout(b,l,m) {\
72 int i; \
73 for (i = 0; i < l; i++) \
74 m("%02x ",b[i]); \
75 }
76 #define deb_info(args...) dprintk(0x01,args)
77 #define deb_i2c(args...) dprintk(0x02,args)
78 #define deb_hab(args...) dprintk(0x04,args)
79
80 /* transfer functions */
bcm3510_writebytes(struct bcm3510_state * state,u8 reg,u8 * buf,u8 len)81 static int bcm3510_writebytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
82 {
83 u8 b[256];
84 int err;
85 struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b, .len = len + 1 };
86
87 b[0] = reg;
88 memcpy(&b[1],buf,len);
89
90 deb_i2c("i2c wr %02x: ",reg);
91 dbufout(buf,len,deb_i2c);
92 deb_i2c("\n");
93
94 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
95
96 deb_info("%s: i2c write error (addr %02x, reg %02x, err == %i)\n",
97 __func__, state->config->demod_address, reg, err);
98 return -EREMOTEIO;
99 }
100
101 return 0;
102 }
103
bcm3510_readbytes(struct bcm3510_state * state,u8 reg,u8 * buf,u8 len)104 static int bcm3510_readbytes (struct bcm3510_state *state, u8 reg, u8 *buf, u8 len)
105 {
106 struct i2c_msg msg[] = {
107 { .addr = state->config->demod_address, .flags = 0, .buf = ®, .len = 1 },
108 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = buf, .len = len }
109 };
110 int err;
111
112 memset(buf,0,len);
113
114 if ((err = i2c_transfer (state->i2c, msg, 2)) != 2) {
115 deb_info("%s: i2c read error (addr %02x, reg %02x, err == %i)\n",
116 __func__, state->config->demod_address, reg, err);
117 return -EREMOTEIO;
118 }
119 deb_i2c("i2c rd %02x: ",reg);
120 dbufout(buf,len,deb_i2c);
121 deb_i2c("\n");
122
123 return 0;
124 }
125
bcm3510_writeB(struct bcm3510_state * state,u8 reg,bcm3510_register_value v)126 static int bcm3510_writeB(struct bcm3510_state *state, u8 reg, bcm3510_register_value v)
127 {
128 return bcm3510_writebytes(state,reg,&v.raw,1);
129 }
130
bcm3510_readB(struct bcm3510_state * state,u8 reg,bcm3510_register_value * v)131 static int bcm3510_readB(struct bcm3510_state *state, u8 reg, bcm3510_register_value *v)
132 {
133 return bcm3510_readbytes(state,reg,&v->raw,1);
134 }
135
136 /* Host Access Buffer transfers */
bcm3510_hab_get_response(struct bcm3510_state * st,u8 * buf,int len)137 static int bcm3510_hab_get_response(struct bcm3510_state *st, u8 *buf, int len)
138 {
139 bcm3510_register_value v;
140 int ret,i;
141
142 v.HABADR_a6.HABADR = 0;
143 if ((ret = bcm3510_writeB(st,0xa6,v)) < 0)
144 return ret;
145
146 for (i = 0; i < len; i++) {
147 if ((ret = bcm3510_readB(st,0xa7,&v)) < 0)
148 return ret;
149 buf[i] = v.HABDATA_a7;
150 }
151 return 0;
152 }
153
bcm3510_hab_send_request(struct bcm3510_state * st,u8 * buf,int len)154 static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
155 {
156 bcm3510_register_value v,hab;
157 int ret,i;
158 unsigned long t;
159
160 /* Check if any previous HAB request still needs to be serviced by the
161 * Acquisition Processor before sending new request */
162 if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
163 return ret;
164 if (v.HABSTAT_a8.HABR) {
165 deb_info("HAB is running already - clearing it.\n");
166 v.HABSTAT_a8.HABR = 0;
167 bcm3510_writeB(st,0xa8,v);
168 // return -EBUSY;
169 }
170
171 /* Send the start HAB Address (automatically incremented after write of
172 * HABDATA) and write the HAB Data */
173 hab.HABADR_a6.HABADR = 0;
174 if ((ret = bcm3510_writeB(st,0xa6,hab)) < 0)
175 return ret;
176
177 for (i = 0; i < len; i++) {
178 hab.HABDATA_a7 = buf[i];
179 if ((ret = bcm3510_writeB(st,0xa7,hab)) < 0)
180 return ret;
181 }
182
183 /* Set the HABR bit to indicate AP request in progress (LBHABR allows HABR to
184 * be written) */
185 v.raw = 0; v.HABSTAT_a8.HABR = 1; v.HABSTAT_a8.LDHABR = 1;
186 if ((ret = bcm3510_writeB(st,0xa8,v)) < 0)
187 return ret;
188
189 /* Polling method: Wait until the AP finishes processing the HAB request */
190 t = jiffies + 1*HZ;
191 while (time_before(jiffies, t)) {
192 deb_info("waiting for HAB to complete\n");
193 msleep(10);
194 if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
195 return ret;
196
197 if (!v.HABSTAT_a8.HABR)
198 return 0;
199 }
200
201 deb_info("send_request execution timed out.\n");
202 return -ETIMEDOUT;
203 }
204
bcm3510_do_hab_cmd(struct bcm3510_state * st,u8 cmd,u8 msgid,u8 * obuf,u8 olen,u8 * ibuf,u8 ilen)205 static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *obuf, u8 olen, u8 *ibuf, u8 ilen)
206 {
207 u8 ob[MAX_XFER_SIZE], ib[MAX_XFER_SIZE];
208 int ret = 0;
209
210 if (ilen + 2 > sizeof(ib)) {
211 deb_hab("do_hab_cmd: ilen=%d is too big!\n", ilen);
212 return -EINVAL;
213 }
214
215 if (olen + 2 > sizeof(ob)) {
216 deb_hab("do_hab_cmd: olen=%d is too big!\n", olen);
217 return -EINVAL;
218 }
219
220 ob[0] = cmd;
221 ob[1] = msgid;
222 memcpy(&ob[2],obuf,olen);
223
224 deb_hab("hab snd: ");
225 dbufout(ob,olen+2,deb_hab);
226 deb_hab("\n");
227
228 if (mutex_lock_interruptible(&st->hab_mutex) < 0)
229 return -EAGAIN;
230
231 if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
232 (ret = bcm3510_hab_get_response(st, ib, ilen+2)) < 0)
233 goto error;
234
235 deb_hab("hab get: ");
236 dbufout(ib,ilen+2,deb_hab);
237 deb_hab("\n");
238
239 memcpy(ibuf,&ib[2],ilen);
240 error:
241 mutex_unlock(&st->hab_mutex);
242 return ret;
243 }
244
245 #if 0
246 /* not needed, we use a semaphore to prevent HAB races */
247 static int bcm3510_is_ap_ready(struct bcm3510_state *st)
248 {
249 bcm3510_register_value ap,hab;
250 int ret;
251
252 if ((ret = bcm3510_readB(st,0xa8,&hab)) < 0 ||
253 (ret = bcm3510_readB(st,0xa2,&ap) < 0))
254 return ret;
255
256 if (ap.APSTAT1_a2.RESET || ap.APSTAT1_a2.IDLE || ap.APSTAT1_a2.STOP || hab.HABSTAT_a8.HABR) {
257 deb_info("AP is busy\n");
258 return -EBUSY;
259 }
260
261 return 0;
262 }
263 #endif
264
bcm3510_bert_reset(struct bcm3510_state * st)265 static int bcm3510_bert_reset(struct bcm3510_state *st)
266 {
267 bcm3510_register_value b;
268 int ret;
269
270 if ((ret = bcm3510_readB(st,0xfa,&b)) < 0)
271 return ret;
272
273 b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
274 b.BERCTL_fa.RESYNC = 1; bcm3510_writeB(st,0xfa,b);
275 b.BERCTL_fa.RESYNC = 0; bcm3510_writeB(st,0xfa,b);
276 b.BERCTL_fa.CNTCTL = 1; b.BERCTL_fa.BITCNT = 1; bcm3510_writeB(st,0xfa,b);
277
278 /* clear residual bit counter TODO */
279 return 0;
280 }
281
bcm3510_refresh_state(struct bcm3510_state * st)282 static int bcm3510_refresh_state(struct bcm3510_state *st)
283 {
284 if (time_after(jiffies,st->next_status_check)) {
285 bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS1, NULL,0, (u8 *)&st->status1, sizeof(st->status1));
286 bcm3510_do_hab_cmd(st, CMD_STATUS, MSGID_STATUS2, NULL,0, (u8 *)&st->status2, sizeof(st->status2));
287 st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000;
288 }
289 return 0;
290 }
291
bcm3510_read_status(struct dvb_frontend * fe,enum fe_status * status)292 static int bcm3510_read_status(struct dvb_frontend *fe, enum fe_status *status)
293 {
294 struct bcm3510_state* st = fe->demodulator_priv;
295 bcm3510_refresh_state(st);
296
297 *status = 0;
298 if (st->status1.STATUS1.RECEIVER_LOCK)
299 *status |= FE_HAS_LOCK | FE_HAS_SYNC;
300
301 if (st->status1.STATUS1.FEC_LOCK)
302 *status |= FE_HAS_VITERBI;
303
304 if (st->status1.STATUS1.OUT_PLL_LOCK)
305 *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER;
306
307 if (*status & FE_HAS_LOCK)
308 st->status_check_interval = 1500;
309 else /* more frequently checks if no lock has been achieved yet */
310 st->status_check_interval = 500;
311
312 deb_info("real_status: %02x\n",*status);
313 return 0;
314 }
315
bcm3510_read_ber(struct dvb_frontend * fe,u32 * ber)316 static int bcm3510_read_ber(struct dvb_frontend* fe, u32* ber)
317 {
318 struct bcm3510_state* st = fe->demodulator_priv;
319 bcm3510_refresh_state(st);
320
321 *ber = (st->status2.LDBER0 << 16) | (st->status2.LDBER1 << 8) | st->status2.LDBER2;
322 return 0;
323 }
324
bcm3510_read_unc(struct dvb_frontend * fe,u32 * unc)325 static int bcm3510_read_unc(struct dvb_frontend* fe, u32* unc)
326 {
327 struct bcm3510_state* st = fe->demodulator_priv;
328 bcm3510_refresh_state(st);
329 *unc = (st->status2.LDUERC0 << 8) | st->status2.LDUERC1;
330 return 0;
331 }
332
bcm3510_read_signal_strength(struct dvb_frontend * fe,u16 * strength)333 static int bcm3510_read_signal_strength(struct dvb_frontend* fe, u16* strength)
334 {
335 struct bcm3510_state* st = fe->demodulator_priv;
336 s32 t;
337
338 bcm3510_refresh_state(st);
339 t = st->status2.SIGNAL;
340
341 if (t > 190)
342 t = 190;
343 if (t < 90)
344 t = 90;
345
346 t -= 90;
347 t = t * 0xff / 100;
348 /* normalize if necessary */
349 *strength = (t << 8) | t;
350 return 0;
351 }
352
bcm3510_read_snr(struct dvb_frontend * fe,u16 * snr)353 static int bcm3510_read_snr(struct dvb_frontend* fe, u16* snr)
354 {
355 struct bcm3510_state* st = fe->demodulator_priv;
356 bcm3510_refresh_state(st);
357
358 *snr = st->status1.SNR_EST0*1000 + ((st->status1.SNR_EST1*1000) >> 8);
359 return 0;
360 }
361
362 /* tuner frontend programming */
bcm3510_tuner_cmd(struct bcm3510_state * st,u8 bc,u16 n,u8 a)363 static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
364 {
365 struct bcm3510_hab_cmd_tune c;
366 memset(&c,0,sizeof(struct bcm3510_hab_cmd_tune));
367
368 /* I2C Mode disabled, set 16 control / Data pairs */
369 c.length = 0x10;
370 c.clock_width = 0;
371 /* CS1, CS0, DATA, CLK bits control the tuner RF_AGC_SEL pin is set to
372 * logic high (as Configuration) */
373 c.misc = 0x10;
374 /* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
375 c.TUNCTL_state = 0x40;
376
377 /* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
378 c.ctl_dat[0].ctrl.size = BITS_8;
379 c.ctl_dat[0].data = 0x80 | bc;
380
381 /* Control DATA pin, 1stosc REFERENCE COUNTER REF_S10 to REF_S3 */
382 c.ctl_dat[1].ctrl.size = BITS_8;
383 c.ctl_dat[1].data = 4;
384
385 /* set CONTROL BIT 1 to 1, 1stosc REFERENCE COUNTER REF_S2 to REF_S1 */
386 c.ctl_dat[2].ctrl.size = BITS_3;
387 c.ctl_dat[2].data = 0x20;
388
389 /* control CS0 pin, pulse byte ? */
390 c.ctl_dat[3].ctrl.size = BITS_3;
391 c.ctl_dat[3].ctrl.clk_off = 1;
392 c.ctl_dat[3].ctrl.cs0 = 1;
393 c.ctl_dat[3].data = 0x40;
394
395 /* PGM_S18 to PGM_S11 */
396 c.ctl_dat[4].ctrl.size = BITS_8;
397 c.ctl_dat[4].data = n >> 3;
398
399 /* PGM_S10 to PGM_S8, SWL_S7 to SWL_S3 */
400 c.ctl_dat[5].ctrl.size = BITS_8;
401 c.ctl_dat[5].data = ((n & 0x7) << 5) | (a >> 2);
402
403 /* SWL_S2 and SWL_S1, set CONTROL BIT 2 to 0 */
404 c.ctl_dat[6].ctrl.size = BITS_3;
405 c.ctl_dat[6].data = (a << 6) & 0xdf;
406
407 /* control CS0 pin, pulse byte ? */
408 c.ctl_dat[7].ctrl.size = BITS_3;
409 c.ctl_dat[7].ctrl.clk_off = 1;
410 c.ctl_dat[7].ctrl.cs0 = 1;
411 c.ctl_dat[7].data = 0x40;
412
413 /* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
414 c.ctl_dat[8].ctrl.size = BITS_8;
415 c.ctl_dat[8].data = 0x80;
416
417 /* 2ndosc REFERENCE COUNTER REF_S10 to REF_S3 */
418 c.ctl_dat[9].ctrl.size = BITS_8;
419 c.ctl_dat[9].data = 0x10;
420
421 /* set CONTROL BIT 1 to 1, 2ndosc REFERENCE COUNTER REF_S2 to REF_S1 */
422 c.ctl_dat[10].ctrl.size = BITS_3;
423 c.ctl_dat[10].data = 0x20;
424
425 /* pulse byte */
426 c.ctl_dat[11].ctrl.size = BITS_3;
427 c.ctl_dat[11].ctrl.clk_off = 1;
428 c.ctl_dat[11].ctrl.cs1 = 1;
429 c.ctl_dat[11].data = 0x40;
430
431 /* PGM_S18 to PGM_S11 */
432 c.ctl_dat[12].ctrl.size = BITS_8;
433 c.ctl_dat[12].data = 0x2a;
434
435 /* PGM_S10 to PGM_S8 and SWL_S7 to SWL_S3 */
436 c.ctl_dat[13].ctrl.size = BITS_8;
437 c.ctl_dat[13].data = 0x8e;
438
439 /* SWL_S2 and SWL_S1 and set CONTROL BIT 2 to 0 */
440 c.ctl_dat[14].ctrl.size = BITS_3;
441 c.ctl_dat[14].data = 0;
442
443 /* Pulse Byte */
444 c.ctl_dat[15].ctrl.size = BITS_3;
445 c.ctl_dat[15].ctrl.clk_off = 1;
446 c.ctl_dat[15].ctrl.cs1 = 1;
447 c.ctl_dat[15].data = 0x40;
448
449 return bcm3510_do_hab_cmd(st,CMD_TUNE, MSGID_TUNE,(u8 *) &c,sizeof(c), NULL, 0);
450 }
451
bcm3510_set_freq(struct bcm3510_state * st,u32 freq)452 static int bcm3510_set_freq(struct bcm3510_state* st,u32 freq)
453 {
454 u8 bc,a;
455 u16 n;
456 s32 YIntercept,Tfvco1;
457
458 freq /= 1000;
459
460 deb_info("%dkHz:",freq);
461 /* set Band Switch */
462 if (freq <= 168000)
463 bc = 0x1c;
464 else if (freq <= 378000)
465 bc = 0x2c;
466 else
467 bc = 0x30;
468
469 if (freq >= 470000) {
470 freq -= 470001;
471 YIntercept = 18805;
472 } else if (freq >= 90000) {
473 freq -= 90001;
474 YIntercept = 15005;
475 } else if (freq >= 76000){
476 freq -= 76001;
477 YIntercept = 14865;
478 } else {
479 freq -= 54001;
480 YIntercept = 14645;
481 }
482
483 Tfvco1 = (((freq/6000)*60 + YIntercept)*4)/10;
484
485 n = Tfvco1 >> 6;
486 a = Tfvco1 & 0x3f;
487
488 deb_info(" BC1_2_3_4: %x, N: %x A: %x\n", bc, n, a);
489 if (n >= 16 && n <= 2047)
490 return bcm3510_tuner_cmd(st,bc,n,a);
491
492 return -EINVAL;
493 }
494
bcm3510_set_frontend(struct dvb_frontend * fe)495 static int bcm3510_set_frontend(struct dvb_frontend *fe)
496 {
497 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
498 struct bcm3510_state* st = fe->demodulator_priv;
499 struct bcm3510_hab_cmd_ext_acquire cmd;
500 struct bcm3510_hab_cmd_bert_control bert;
501 int ret;
502
503 memset(&cmd,0,sizeof(cmd));
504 switch (c->modulation) {
505 case QAM_256:
506 cmd.ACQUIRE0.MODE = 0x1;
507 cmd.ACQUIRE1.SYM_RATE = 0x1;
508 cmd.ACQUIRE1.IF_FREQ = 0x1;
509 break;
510 case QAM_64:
511 cmd.ACQUIRE0.MODE = 0x2;
512 cmd.ACQUIRE1.SYM_RATE = 0x2;
513 cmd.ACQUIRE1.IF_FREQ = 0x1;
514 break;
515 #if 0
516 case QAM_256:
517 cmd.ACQUIRE0.MODE = 0x3;
518 break;
519 case QAM_128:
520 cmd.ACQUIRE0.MODE = 0x4;
521 break;
522 case QAM_64:
523 cmd.ACQUIRE0.MODE = 0x5;
524 break;
525 case QAM_32:
526 cmd.ACQUIRE0.MODE = 0x6;
527 break;
528 case QAM_16:
529 cmd.ACQUIRE0.MODE = 0x7;
530 break;
531 #endif
532 case VSB_8:
533 cmd.ACQUIRE0.MODE = 0x8;
534 cmd.ACQUIRE1.SYM_RATE = 0x0;
535 cmd.ACQUIRE1.IF_FREQ = 0x0;
536 break;
537 case VSB_16:
538 cmd.ACQUIRE0.MODE = 0x9;
539 cmd.ACQUIRE1.SYM_RATE = 0x0;
540 cmd.ACQUIRE1.IF_FREQ = 0x0;
541 break;
542 default:
543 return -EINVAL;
544 }
545 cmd.ACQUIRE0.OFFSET = 0;
546 cmd.ACQUIRE0.NTSCSWEEP = 1;
547 cmd.ACQUIRE0.FA = 1;
548 cmd.ACQUIRE0.BW = 0;
549
550 /* if (enableOffset) {
551 cmd.IF_OFFSET0 = xx;
552 cmd.IF_OFFSET1 = xx;
553
554 cmd.SYM_OFFSET0 = xx;
555 cmd.SYM_OFFSET1 = xx;
556 if (enableNtscSweep) {
557 cmd.NTSC_OFFSET0;
558 cmd.NTSC_OFFSET1;
559 }
560 } */
561 bcm3510_do_hab_cmd(st, CMD_ACQUIRE, MSGID_EXT_TUNER_ACQUIRE, (u8 *) &cmd, sizeof(cmd), NULL, 0);
562
563 /* doing it with different MSGIDs, data book and source differs */
564 bert.BE = 0;
565 bert.unused = 0;
566 bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_CONTROL, (u8 *) &bert, sizeof(bert), NULL, 0);
567 bcm3510_do_hab_cmd(st, CMD_STATE_CONTROL, MSGID_BERT_SET, (u8 *) &bert, sizeof(bert), NULL, 0);
568
569 bcm3510_bert_reset(st);
570
571 ret = bcm3510_set_freq(st, c->frequency);
572 if (ret < 0)
573 return ret;
574
575 memset(&st->status1,0,sizeof(st->status1));
576 memset(&st->status2,0,sizeof(st->status2));
577 st->status_check_interval = 500;
578
579 /* Give the AP some time */
580 msleep(200);
581
582 return 0;
583 }
584
bcm3510_sleep(struct dvb_frontend * fe)585 static int bcm3510_sleep(struct dvb_frontend* fe)
586 {
587 return 0;
588 }
589
bcm3510_get_tune_settings(struct dvb_frontend * fe,struct dvb_frontend_tune_settings * s)590 static int bcm3510_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *s)
591 {
592 s->min_delay_ms = 1000;
593 s->step_size = 0;
594 s->max_drift = 0;
595 return 0;
596 }
597
bcm3510_release(struct dvb_frontend * fe)598 static void bcm3510_release(struct dvb_frontend* fe)
599 {
600 struct bcm3510_state* state = fe->demodulator_priv;
601 kfree(state);
602 }
603
604 /* firmware download:
605 * firmware file is build up like this:
606 * 16bit addr, 16bit length, 8byte of length
607 */
608 #define BCM3510_DEFAULT_FIRMWARE "dvb-fe-bcm3510-01.fw"
609
bcm3510_write_ram(struct bcm3510_state * st,u16 addr,const u8 * b,u16 len)610 static int bcm3510_write_ram(struct bcm3510_state *st, u16 addr, const u8 *b,
611 u16 len)
612 {
613 int ret = 0,i;
614 bcm3510_register_value vH, vL,vD;
615
616 vH.MADRH_a9 = addr >> 8;
617 vL.MADRL_aa = addr;
618 if ((ret = bcm3510_writeB(st,0xa9,vH)) < 0) return ret;
619 if ((ret = bcm3510_writeB(st,0xaa,vL)) < 0) return ret;
620
621 for (i = 0; i < len; i++) {
622 vD.MDATA_ab = b[i];
623 if ((ret = bcm3510_writeB(st,0xab,vD)) < 0)
624 return ret;
625 }
626
627 return 0;
628 }
629
bcm3510_download_firmware(struct dvb_frontend * fe)630 static int bcm3510_download_firmware(struct dvb_frontend* fe)
631 {
632 struct bcm3510_state* st = fe->demodulator_priv;
633 const struct firmware *fw;
634 u16 addr,len;
635 const u8 *b;
636 int ret,i;
637
638 deb_info("requesting firmware\n");
639 if ((ret = st->config->request_firmware(fe, &fw, BCM3510_DEFAULT_FIRMWARE)) < 0) {
640 err("could not load firmware (%s): %d",BCM3510_DEFAULT_FIRMWARE,ret);
641 return ret;
642 }
643 deb_info("got firmware: %zu\n", fw->size);
644
645 b = fw->data;
646 for (i = 0; i < fw->size;) {
647 addr = le16_to_cpu(*((__le16 *)&b[i]));
648 len = le16_to_cpu(*((__le16 *)&b[i+2]));
649 deb_info("firmware chunk, addr: 0x%04x, len: 0x%04x, total length: 0x%04zx\n",addr,len,fw->size);
650 if ((ret = bcm3510_write_ram(st,addr,&b[i+4],len)) < 0) {
651 err("firmware download failed: %d\n",ret);
652 release_firmware(fw);
653 return ret;
654 }
655 i += 4 + len;
656 }
657 release_firmware(fw);
658 deb_info("firmware download successfully completed\n");
659 return 0;
660 }
661
bcm3510_check_firmware_version(struct bcm3510_state * st)662 static int bcm3510_check_firmware_version(struct bcm3510_state *st)
663 {
664 struct bcm3510_hab_cmd_get_version_info ver;
665 bcm3510_do_hab_cmd(st,CMD_GET_VERSION_INFO,MSGID_GET_VERSION_INFO,NULL,0,(u8*)&ver,sizeof(ver));
666
667 deb_info("Version information: 0x%02x 0x%02x 0x%02x 0x%02x\n",
668 ver.microcode_version, ver.script_version, ver.config_version, ver.demod_version);
669
670 if (ver.script_version == BCM3510_DEF_SCRIPT_VERSION &&
671 ver.config_version == BCM3510_DEF_CONFIG_VERSION &&
672 ver.demod_version == BCM3510_DEF_DEMOD_VERSION)
673 return 0;
674
675 deb_info("version check failed\n");
676 return -ENODEV;
677 }
678
679 /* (un)resetting the AP */
bcm3510_reset(struct bcm3510_state * st)680 static int bcm3510_reset(struct bcm3510_state *st)
681 {
682 int ret;
683 unsigned long t;
684 bcm3510_register_value v;
685
686 bcm3510_readB(st,0xa0,&v); v.HCTL1_a0.RESET = 1;
687 if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
688 return ret;
689
690 t = jiffies + 3*HZ;
691 while (time_before(jiffies, t)) {
692 msleep(10);
693 if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
694 return ret;
695
696 if (v.APSTAT1_a2.RESET)
697 return 0;
698 }
699 deb_info("reset timed out\n");
700 return -ETIMEDOUT;
701 }
702
bcm3510_clear_reset(struct bcm3510_state * st)703 static int bcm3510_clear_reset(struct bcm3510_state *st)
704 {
705 bcm3510_register_value v;
706 int ret;
707 unsigned long t;
708
709 v.raw = 0;
710 if ((ret = bcm3510_writeB(st,0xa0,v)) < 0)
711 return ret;
712
713 t = jiffies + 3*HZ;
714 while (time_before(jiffies, t)) {
715 msleep(10);
716 if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
717 return ret;
718
719 /* verify that reset is cleared */
720 if (!v.APSTAT1_a2.RESET)
721 return 0;
722 }
723 deb_info("reset clear timed out\n");
724 return -ETIMEDOUT;
725 }
726
bcm3510_init_cold(struct bcm3510_state * st)727 static int bcm3510_init_cold(struct bcm3510_state *st)
728 {
729 int ret;
730 bcm3510_register_value v;
731
732 /* read Acquisation Processor status register and check it is not in RUN mode */
733 if ((ret = bcm3510_readB(st,0xa2,&v)) < 0)
734 return ret;
735 if (v.APSTAT1_a2.RUN) {
736 deb_info("AP is already running - firmware already loaded.\n");
737 return 0;
738 }
739
740 deb_info("reset?\n");
741 if ((ret = bcm3510_reset(st)) < 0)
742 return ret;
743
744 deb_info("tristate?\n");
745 /* tri-state */
746 v.TSTCTL_2e.CTL = 0;
747 if ((ret = bcm3510_writeB(st,0x2e,v)) < 0)
748 return ret;
749
750 deb_info("firmware?\n");
751 if ((ret = bcm3510_download_firmware(&st->frontend)) < 0 ||
752 (ret = bcm3510_clear_reset(st)) < 0)
753 return ret;
754
755 /* anything left here to Let the acquisition processor begin execution at program counter 0000 ??? */
756
757 return 0;
758 }
759
bcm3510_init(struct dvb_frontend * fe)760 static int bcm3510_init(struct dvb_frontend* fe)
761 {
762 struct bcm3510_state* st = fe->demodulator_priv;
763 bcm3510_register_value j;
764 struct bcm3510_hab_cmd_set_agc c;
765 int ret;
766
767 if ((ret = bcm3510_readB(st,0xca,&j)) < 0)
768 return ret;
769
770 deb_info("JDEC: %02x\n",j.raw);
771
772 switch (j.JDEC_ca.JDEC) {
773 case JDEC_WAIT_AT_RAM:
774 deb_info("attempting to download firmware\n");
775 if ((ret = bcm3510_init_cold(st)) < 0)
776 return ret;
777 fallthrough;
778 case JDEC_EEPROM_LOAD_WAIT:
779 deb_info("firmware is loaded\n");
780 bcm3510_check_firmware_version(st);
781 break;
782 default:
783 return -ENODEV;
784 }
785
786 memset(&c,0,1);
787 c.SEL = 1;
788 bcm3510_do_hab_cmd(st,CMD_AUTO_PARAM,MSGID_SET_RF_AGC_SEL,(u8 *)&c,sizeof(c),NULL,0);
789
790 return 0;
791 }
792
793
794 static const struct dvb_frontend_ops bcm3510_ops;
795
bcm3510_attach(const struct bcm3510_config * config,struct i2c_adapter * i2c)796 struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
797 struct i2c_adapter *i2c)
798 {
799 struct bcm3510_state* state = NULL;
800 int ret;
801 bcm3510_register_value v;
802
803 /* allocate memory for the internal state */
804 state = kzalloc(sizeof(struct bcm3510_state), GFP_KERNEL);
805 if (state == NULL)
806 goto error;
807
808 /* setup the state */
809
810 state->config = config;
811 state->i2c = i2c;
812
813 /* create dvb_frontend */
814 memcpy(&state->frontend.ops, &bcm3510_ops, sizeof(struct dvb_frontend_ops));
815 state->frontend.demodulator_priv = state;
816
817 mutex_init(&state->hab_mutex);
818
819 if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
820 goto error;
821
822 deb_info("Revision: 0x%1x, Layer: 0x%1x.\n",v.REVID_e0.REV,v.REVID_e0.LAYER);
823
824 if ((v.REVID_e0.REV != 0x1 && v.REVID_e0.LAYER != 0xb) && /* cold */
825 (v.REVID_e0.REV != 0x8 && v.REVID_e0.LAYER != 0x0)) /* warm */
826 goto error;
827
828 info("Revision: 0x%1x, Layer: 0x%1x.",v.REVID_e0.REV,v.REVID_e0.LAYER);
829
830 bcm3510_reset(state);
831
832 return &state->frontend;
833
834 error:
835 kfree(state);
836 return NULL;
837 }
838 EXPORT_SYMBOL_GPL(bcm3510_attach);
839
840 static const struct dvb_frontend_ops bcm3510_ops = {
841 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
842 .info = {
843 .name = "Broadcom BCM3510 VSB/QAM frontend",
844 .frequency_min_hz = 54 * MHz,
845 .frequency_max_hz = 803 * MHz,
846 .caps =
847 FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
848 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
849 FE_CAN_8VSB | FE_CAN_16VSB |
850 FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_128 | FE_CAN_QAM_256
851 },
852
853 .release = bcm3510_release,
854
855 .init = bcm3510_init,
856 .sleep = bcm3510_sleep,
857
858 .set_frontend = bcm3510_set_frontend,
859 .get_tune_settings = bcm3510_get_tune_settings,
860
861 .read_status = bcm3510_read_status,
862 .read_ber = bcm3510_read_ber,
863 .read_signal_strength = bcm3510_read_signal_strength,
864 .read_snr = bcm3510_read_snr,
865 .read_ucblocks = bcm3510_read_unc,
866 };
867
868 MODULE_DESCRIPTION("Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator driver");
869 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
870 MODULE_LICENSE("GPL");
871