1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Allegro A8293 SEC driver
4  *
5  * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
6  */
7 
8 #include "a8293.h"
9 
10 #define A8293_FLAG_ODT			0x10
11 
12 struct a8293_dev {
13 	struct i2c_client *client;
14 	u8 reg[2];
15 	int volt_slew_nanos_per_mv;
16 };
17 
18 /*
19  * When increasing voltage, do so in minimal steps over time, minimizing
20  * risk of vIN undervoltage.
21  */
22 
23 static int a8293_set_voltage_slew(struct a8293_dev *dev,
24 				  struct i2c_client *client,
25 				  enum fe_sec_voltage fe_sec_voltage,
26 				  int min_nanos_per_mv)
27 {
28 	int ret;
29 	u8 reg0, reg1;
30 	int new_volt_idx;
31 	const int idx_to_mv[] = {
32 		0,    12709, 13042, 13375, 14042, 15042, 18042, 18709, 19042
33 	};
34 	const u8 idx_to_reg[] = {
35 		0x00, 0x20,  0x21,  0x22,  0x24,  0x27,  0x28,  0x2A,  0x2B
36 	};
37 	int this_volt_idx;
38 	u8 status;
39 	int prev_volt_idx;
40 
41 	dev_dbg(&client->dev, "set_voltage_slew fe_sec_voltage=%d\n",
42 		fe_sec_voltage);
43 
44 	/* Read status register to clear any stale faults. */
45 	ret = i2c_master_recv(client, &status, 1);
46 	if (ret < 0)
47 		goto err;
48 
49 	/* Determine previous voltage */
50 	switch (dev->reg[0] & 0x2F) {
51 	case 0x00:
52 		prev_volt_idx = 0;
53 		break;
54 	case 0x20:
55 		prev_volt_idx = 1;
56 		break;
57 	case 0x21:
58 		prev_volt_idx = 2;
59 		break;
60 	case 0x22:
61 		prev_volt_idx = 3;
62 		break;
63 	case 0x24:
64 		prev_volt_idx = 4;
65 		break;
66 	case 0x27:
67 		prev_volt_idx = 5;
68 		break;
69 	case 0x28:
70 		prev_volt_idx = 6;
71 		break;
72 	case 0x2A:
73 		prev_volt_idx = 7;
74 		break;
75 	case 0x2B:
76 		prev_volt_idx = 8;
77 		break;
78 	default:
79 		prev_volt_idx = 0;
80 	}
81 
82 	/* Determine new voltage */
83 	switch (fe_sec_voltage) {
84 	case SEC_VOLTAGE_OFF:
85 		new_volt_idx = 0;
86 		break;
87 	case SEC_VOLTAGE_13:
88 		new_volt_idx = 2;
89 		break;
90 	case SEC_VOLTAGE_18:
91 		new_volt_idx = 6;
92 		break;
93 	default:
94 		ret = -EINVAL;
95 		goto err;
96 	}
97 
98 	/* Slew to new voltage if new voltage is greater than current voltage */
99 	this_volt_idx = prev_volt_idx;
100 	if (this_volt_idx < new_volt_idx) {
101 		while (this_volt_idx < new_volt_idx) {
102 			int delta_mv = idx_to_mv[this_volt_idx+1] - idx_to_mv[this_volt_idx];
103 			int min_wait_time = delta_mv * min_nanos_per_mv;
104 
105 			reg0 = idx_to_reg[this_volt_idx+1];
106 			reg0 |= A8293_FLAG_ODT;
107 
108 			ret = i2c_master_send(client, &reg0, 1);
109 			if (ret < 0)
110 				goto err;
111 			dev->reg[0] = reg0;
112 			this_volt_idx++;
113 			usleep_range(min_wait_time, min_wait_time * 2);
114 		}
115 	} else { /* Else just set the voltage */
116 		reg0 = idx_to_reg[new_volt_idx];
117 		reg0 |= A8293_FLAG_ODT;
118 		ret = i2c_master_send(client, &reg0, 1);
119 		if (ret < 0)
120 			goto err;
121 		dev->reg[0] = reg0;
122 	}
123 
124 	/* TMODE=0, TGATE=1 */
125 	reg1 = 0x82;
126 	if (reg1 != dev->reg[1]) {
127 		ret = i2c_master_send(client, &reg1, 1);
128 		if (ret < 0)
129 			goto err;
130 		dev->reg[1] = reg1;
131 	}
132 
133 	usleep_range(1500, 5000);
134 
135 	return 0;
136 err:
137 	dev_dbg(&client->dev, "failed=%d\n", ret);
138 	return ret;
139 }
140 
141 
142 static int a8293_set_voltage_noslew(struct dvb_frontend *fe,
143 				    enum fe_sec_voltage fe_sec_voltage)
144 {
145 	struct a8293_dev *dev = fe->sec_priv;
146 	struct i2c_client *client = dev->client;
147 	int ret;
148 	u8 reg0, reg1;
149 
150 	dev_dbg(&client->dev, "set_voltage_noslew fe_sec_voltage=%d\n",
151 		fe_sec_voltage);
152 
153 	switch (fe_sec_voltage) {
154 	case SEC_VOLTAGE_OFF:
155 		/* ENB=0 */
156 		reg0 = 0x10;
157 		break;
158 	case SEC_VOLTAGE_13:
159 		/* VSEL0=1, VSEL1=0, VSEL2=0, VSEL3=0, ENB=1*/
160 		reg0 = 0x31;
161 		break;
162 	case SEC_VOLTAGE_18:
163 		/* VSEL0=0, VSEL1=0, VSEL2=0, VSEL3=1, ENB=1*/
164 		reg0 = 0x38;
165 		break;
166 	default:
167 		ret = -EINVAL;
168 		goto err;
169 	}
170 	if (reg0 != dev->reg[0]) {
171 		ret = i2c_master_send(client, &reg0, 1);
172 		if (ret < 0)
173 			goto err;
174 		dev->reg[0] = reg0;
175 	}
176 
177 	/* TMODE=0, TGATE=1 */
178 	reg1 = 0x82;
179 	if (reg1 != dev->reg[1]) {
180 		ret = i2c_master_send(client, &reg1, 1);
181 		if (ret < 0)
182 			goto err;
183 		dev->reg[1] = reg1;
184 	}
185 
186 	usleep_range(1500, 50000);
187 	return 0;
188 err:
189 	dev_dbg(&client->dev, "failed=%d\n", ret);
190 	return ret;
191 }
192 
193 static int a8293_set_voltage(struct dvb_frontend *fe,
194 			     enum fe_sec_voltage fe_sec_voltage)
195 {
196 	struct a8293_dev *dev = fe->sec_priv;
197 	struct i2c_client *client = dev->client;
198 	int volt_slew_nanos_per_mv = dev->volt_slew_nanos_per_mv;
199 
200 	dev_dbg(&client->dev, "set_voltage volt_slew_nanos_per_mv=%d\n",
201 		volt_slew_nanos_per_mv);
202 
203 	/* Use slew version if slew rate is set to a sane value */
204 	if (volt_slew_nanos_per_mv > 0 && volt_slew_nanos_per_mv < 1600)
205 		a8293_set_voltage_slew(dev, client, fe_sec_voltage,
206 				       volt_slew_nanos_per_mv);
207 	else
208 		a8293_set_voltage_noslew(fe, fe_sec_voltage);
209 
210 	return 0;
211 }
212 
213 static int a8293_probe(struct i2c_client *client)
214 {
215 	struct a8293_dev *dev;
216 	struct a8293_platform_data *pdata = client->dev.platform_data;
217 	struct dvb_frontend *fe = pdata->dvb_frontend;
218 	int ret;
219 	u8 buf[2];
220 
221 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
222 	if (!dev) {
223 		ret = -ENOMEM;
224 		goto err;
225 	}
226 
227 	dev->client = client;
228 	dev->volt_slew_nanos_per_mv = pdata->volt_slew_nanos_per_mv;
229 
230 	/* check if the SEC is there */
231 	ret = i2c_master_recv(client, buf, 2);
232 	if (ret < 0)
233 		goto err_kfree;
234 
235 	/* override frontend ops */
236 	fe->ops.set_voltage = a8293_set_voltage;
237 	fe->sec_priv = dev;
238 	i2c_set_clientdata(client, dev);
239 
240 	dev_info(&client->dev, "Allegro A8293 SEC successfully attached\n");
241 	return 0;
242 err_kfree:
243 	kfree(dev);
244 err:
245 	dev_dbg(&client->dev, "failed=%d\n", ret);
246 	return ret;
247 }
248 
249 static void a8293_remove(struct i2c_client *client)
250 {
251 	struct a8293_dev *dev = i2c_get_clientdata(client);
252 
253 	dev_dbg(&client->dev, "\n");
254 
255 	kfree(dev);
256 }
257 
258 static const struct i2c_device_id a8293_id_table[] = {
259 	{"a8293", 0},
260 	{}
261 };
262 MODULE_DEVICE_TABLE(i2c, a8293_id_table);
263 
264 static struct i2c_driver a8293_driver = {
265 	.driver = {
266 		.name	= "a8293",
267 		.suppress_bind_attrs = true,
268 	},
269 	.probe		= a8293_probe,
270 	.remove		= a8293_remove,
271 	.id_table	= a8293_id_table,
272 };
273 
274 module_i2c_driver(a8293_driver);
275 
276 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
277 MODULE_DESCRIPTION("Allegro A8293 SEC driver");
278 MODULE_LICENSE("GPL");
279