1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III 4 * flexcop-fe-tuner.c - methods for frontend attachment and DiSEqC controlling 5 * see flexcop.c for copyright information 6 */ 7 #include <media/tuner.h> 8 #include "flexcop.h" 9 #include "mt312.h" 10 #include "stv0299.h" 11 #include "s5h1420.h" 12 #include "itd1000.h" 13 #include "cx24113.h" 14 #include "cx24123.h" 15 #include "isl6421.h" 16 #include "cx24120.h" 17 #include "mt352.h" 18 #include "bcm3510.h" 19 #include "nxt200x.h" 20 #include "dvb-pll.h" 21 #include "lgdt330x.h" 22 #include "tuner-simple.h" 23 #include "stv0297.h" 24 25 26 /* Can we use the specified front-end? Remember that if we are compiled 27 * into the kernel we can't call code that's in modules. */ 28 #define FE_SUPPORTED(fe) IS_REACHABLE(CONFIG_DVB_ ## fe) 29 30 #if FE_SUPPORTED(BCM3510) || (FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421)) 31 static int flexcop_fe_request_firmware(struct dvb_frontend *fe, 32 const struct firmware **fw, char *name) 33 { 34 struct flexcop_device *fc = fe->dvb->priv; 35 36 return request_firmware(fw, name, fc->dev); 37 } 38 #endif 39 40 /* lnb control */ 41 #if (FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)) && FE_SUPPORTED(PLL) 42 static int flexcop_set_voltage(struct dvb_frontend *fe, 43 enum fe_sec_voltage voltage) 44 { 45 struct flexcop_device *fc = fe->dvb->priv; 46 flexcop_ibi_value v; 47 deb_tuner("polarity/voltage = %u\n", voltage); 48 49 v = fc->read_ibi_reg(fc, misc_204); 50 switch (voltage) { 51 case SEC_VOLTAGE_OFF: 52 v.misc_204.ACPI1_sig = 1; 53 break; 54 case SEC_VOLTAGE_13: 55 v.misc_204.ACPI1_sig = 0; 56 v.misc_204.LNB_L_H_sig = 0; 57 break; 58 case SEC_VOLTAGE_18: 59 v.misc_204.ACPI1_sig = 0; 60 v.misc_204.LNB_L_H_sig = 1; 61 break; 62 default: 63 err("unknown SEC_VOLTAGE value"); 64 return -EINVAL; 65 } 66 return fc->write_ibi_reg(fc, misc_204, v); 67 } 68 #endif 69 70 #if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312) 71 static int __maybe_unused flexcop_sleep(struct dvb_frontend* fe) 72 { 73 struct flexcop_device *fc = fe->dvb->priv; 74 if (fc->fe_sleep) 75 return fc->fe_sleep(fe); 76 return 0; 77 } 78 #endif 79 80 /* SkyStar2 DVB-S rev 2.3 */ 81 #if FE_SUPPORTED(MT312) && FE_SUPPORTED(PLL) 82 static int flexcop_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) 83 { 84 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ 85 struct flexcop_device *fc = fe->dvb->priv; 86 flexcop_ibi_value v; 87 u16 ax; 88 v.raw = 0; 89 deb_tuner("tone = %u\n",tone); 90 91 switch (tone) { 92 case SEC_TONE_ON: 93 ax = 0x01ff; 94 break; 95 case SEC_TONE_OFF: 96 ax = 0; 97 break; 98 default: 99 err("unknown SEC_TONE value"); 100 return -EINVAL; 101 } 102 103 v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ 104 v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; 105 v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; 106 return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); 107 } 108 109 static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) 110 { 111 flexcop_set_tone(fe, SEC_TONE_ON); 112 udelay(data ? 500 : 1000); 113 flexcop_set_tone(fe, SEC_TONE_OFF); 114 udelay(data ? 1000 : 500); 115 } 116 117 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) 118 { 119 int i, par = 1, d; 120 for (i = 7; i >= 0; i--) { 121 d = (data >> i) & 1; 122 par ^= d; 123 flexcop_diseqc_send_bit(fe, d); 124 } 125 flexcop_diseqc_send_bit(fe, par); 126 } 127 128 static int flexcop_send_diseqc_msg(struct dvb_frontend *fe, 129 int len, u8 *msg, unsigned long burst) 130 { 131 int i; 132 133 flexcop_set_tone(fe, SEC_TONE_OFF); 134 mdelay(16); 135 136 for (i = 0; i < len; i++) 137 flexcop_diseqc_send_byte(fe,msg[i]); 138 mdelay(16); 139 140 if (burst != -1) { 141 if (burst) 142 flexcop_diseqc_send_byte(fe, 0xff); 143 else { 144 flexcop_set_tone(fe, SEC_TONE_ON); 145 mdelay(12); 146 udelay(500); 147 flexcop_set_tone(fe, SEC_TONE_OFF); 148 } 149 msleep(20); 150 } 151 return 0; 152 } 153 154 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend *fe, 155 struct dvb_diseqc_master_cmd *cmd) 156 { 157 return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); 158 } 159 160 static int flexcop_diseqc_send_burst(struct dvb_frontend *fe, 161 enum fe_sec_mini_cmd minicmd) 162 { 163 return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); 164 } 165 166 static struct mt312_config skystar23_samsung_tbdu18132_config = { 167 .demod_address = 0x0e, 168 }; 169 170 static int skystar2_rev23_attach(struct flexcop_device *fc, 171 struct i2c_adapter *i2c) 172 { 173 struct dvb_frontend_ops *ops; 174 175 fc->fe = dvb_attach(mt312_attach, &skystar23_samsung_tbdu18132_config, i2c); 176 if (!fc->fe) 177 return 0; 178 179 if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, 180 DVB_PLL_SAMSUNG_TBDU18132)) 181 return 0; 182 183 ops = &fc->fe->ops; 184 ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; 185 ops->diseqc_send_burst = flexcop_diseqc_send_burst; 186 ops->set_tone = flexcop_set_tone; 187 ops->set_voltage = flexcop_set_voltage; 188 fc->fe_sleep = ops->sleep; 189 ops->sleep = flexcop_sleep; 190 return 1; 191 } 192 #else 193 #define skystar2_rev23_attach NULL 194 #endif 195 196 /* SkyStar2 DVB-S rev 2.6 */ 197 #if FE_SUPPORTED(STV0299) && FE_SUPPORTED(PLL) 198 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe, 199 u32 srate, u32 ratio) 200 { 201 u8 aclk = 0; 202 u8 bclk = 0; 203 204 if (srate < 1500000) { 205 aclk = 0xb7; bclk = 0x47; 206 } else if (srate < 3000000) { 207 aclk = 0xb7; bclk = 0x4b; 208 } else if (srate < 7000000) { 209 aclk = 0xb7; bclk = 0x4f; 210 } else if (srate < 14000000) { 211 aclk = 0xb7; bclk = 0x53; 212 } else if (srate < 30000000) { 213 aclk = 0xb6; bclk = 0x53; 214 } else if (srate < 45000000) { 215 aclk = 0xb4; bclk = 0x51; 216 } 217 218 stv0299_writereg(fe, 0x13, aclk); 219 stv0299_writereg(fe, 0x14, bclk); 220 stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); 221 stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); 222 stv0299_writereg(fe, 0x21, ratio & 0xf0); 223 return 0; 224 } 225 226 static u8 samsung_tbmu24112_inittab[] = { 227 0x01, 0x15, 228 0x02, 0x30, 229 0x03, 0x00, 230 0x04, 0x7D, 231 0x05, 0x35, 232 0x06, 0x02, 233 0x07, 0x00, 234 0x08, 0xC3, 235 0x0C, 0x00, 236 0x0D, 0x81, 237 0x0E, 0x23, 238 0x0F, 0x12, 239 0x10, 0x7E, 240 0x11, 0x84, 241 0x12, 0xB9, 242 0x13, 0x88, 243 0x14, 0x89, 244 0x15, 0xC9, 245 0x16, 0x00, 246 0x17, 0x5C, 247 0x18, 0x00, 248 0x19, 0x00, 249 0x1A, 0x00, 250 0x1C, 0x00, 251 0x1D, 0x00, 252 0x1E, 0x00, 253 0x1F, 0x3A, 254 0x20, 0x2E, 255 0x21, 0x80, 256 0x22, 0xFF, 257 0x23, 0xC1, 258 0x28, 0x00, 259 0x29, 0x1E, 260 0x2A, 0x14, 261 0x2B, 0x0F, 262 0x2C, 0x09, 263 0x2D, 0x05, 264 0x31, 0x1F, 265 0x32, 0x19, 266 0x33, 0xFE, 267 0x34, 0x93, 268 0xff, 0xff, 269 }; 270 271 static struct stv0299_config samsung_tbmu24112_config = { 272 .demod_address = 0x68, 273 .inittab = samsung_tbmu24112_inittab, 274 .mclk = 88000000UL, 275 .invert = 0, 276 .skip_reinit = 0, 277 .lock_output = STV0299_LOCKOUTPUT_LK, 278 .volt13_op0_op1 = STV0299_VOLT13_OP1, 279 .min_delay_ms = 100, 280 .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, 281 }; 282 283 static int skystar2_rev26_attach(struct flexcop_device *fc, 284 struct i2c_adapter *i2c) 285 { 286 fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, i2c); 287 if (!fc->fe) 288 return 0; 289 290 if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, i2c, 291 DVB_PLL_SAMSUNG_TBMU24112)) 292 return 0; 293 294 fc->fe->ops.set_voltage = flexcop_set_voltage; 295 fc->fe_sleep = fc->fe->ops.sleep; 296 fc->fe->ops.sleep = flexcop_sleep; 297 return 1; 298 299 } 300 #else 301 #define skystar2_rev26_attach NULL 302 #endif 303 304 /* SkyStar2 DVB-S rev 2.7 */ 305 #if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000) 306 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = { 307 .demod_address = 0x53, 308 .invert = 1, 309 .repeated_start_workaround = 1, 310 .serial_mpeg = 1, 311 }; 312 313 static struct itd1000_config skystar2_rev2_7_itd1000_config = { 314 .i2c_address = 0x61, 315 }; 316 317 static int skystar2_rev27_attach(struct flexcop_device *fc, 318 struct i2c_adapter *i2c) 319 { 320 flexcop_ibi_value r108; 321 struct i2c_adapter *i2c_tuner; 322 323 /* enable no_base_addr - no repeated start when reading */ 324 fc->fc_i2c_adap[0].no_base_addr = 1; 325 fc->fe = dvb_attach(s5h1420_attach, &skystar2_rev2_7_s5h1420_config, 326 i2c); 327 if (!fc->fe) 328 goto fail; 329 330 i2c_tuner = s5h1420_get_tuner_i2c_adapter(fc->fe); 331 if (!i2c_tuner) 332 goto fail; 333 334 fc->fe_sleep = fc->fe->ops.sleep; 335 fc->fe->ops.sleep = flexcop_sleep; 336 337 /* enable no_base_addr - no repeated start when reading */ 338 fc->fc_i2c_adap[2].no_base_addr = 1; 339 if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 340 0x08, 1, 1, false)) { 341 err("ISL6421 could NOT be attached"); 342 goto fail_isl; 343 } 344 info("ISL6421 successfully attached"); 345 346 /* the ITD1000 requires a lower i2c clock - is it a problem ? */ 347 r108.raw = 0x00000506; 348 fc->write_ibi_reg(fc, tw_sm_c_108, r108); 349 if (!dvb_attach(itd1000_attach, fc->fe, i2c_tuner, 350 &skystar2_rev2_7_itd1000_config)) { 351 err("ITD1000 could NOT be attached"); 352 /* Should i2c clock be restored? */ 353 goto fail_isl; 354 } 355 info("ITD1000 successfully attached"); 356 357 return 1; 358 359 fail_isl: 360 fc->fc_i2c_adap[2].no_base_addr = 0; 361 fail: 362 /* for the next devices we need it again */ 363 fc->fc_i2c_adap[0].no_base_addr = 0; 364 return 0; 365 } 366 #else 367 #define skystar2_rev27_attach NULL 368 #endif 369 370 /* SkyStar2 rev 2.8 */ 371 #if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113) 372 static struct cx24123_config skystar2_rev2_8_cx24123_config = { 373 .demod_address = 0x55, 374 .dont_use_pll = 1, 375 .agc_callback = cx24113_agc_callback, 376 }; 377 378 static const struct cx24113_config skystar2_rev2_8_cx24113_config = { 379 .i2c_addr = 0x54, 380 .xtal_khz = 10111, 381 }; 382 383 static int skystar2_rev28_attach(struct flexcop_device *fc, 384 struct i2c_adapter *i2c) 385 { 386 struct i2c_adapter *i2c_tuner; 387 388 fc->fe = dvb_attach(cx24123_attach, &skystar2_rev2_8_cx24123_config, 389 i2c); 390 if (!fc->fe) 391 return 0; 392 393 i2c_tuner = cx24123_get_tuner_i2c_adapter(fc->fe); 394 if (!i2c_tuner) 395 return 0; 396 397 if (!dvb_attach(cx24113_attach, fc->fe, &skystar2_rev2_8_cx24113_config, 398 i2c_tuner)) { 399 err("CX24113 could NOT be attached"); 400 return 0; 401 } 402 info("CX24113 successfully attached"); 403 404 fc->fc_i2c_adap[2].no_base_addr = 1; 405 if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 406 0x08, 0, 0, false)) { 407 err("ISL6421 could NOT be attached"); 408 fc->fc_i2c_adap[2].no_base_addr = 0; 409 return 0; 410 } 411 info("ISL6421 successfully attached"); 412 /* TODO on i2c_adap[1] addr 0x11 (EEPROM) there seems to be an 413 * IR-receiver (PIC16F818) - but the card has no input for that ??? */ 414 return 1; 415 } 416 #else 417 #define skystar2_rev28_attach NULL 418 #endif 419 420 /* AirStar DVB-T */ 421 #if FE_SUPPORTED(MT352) && FE_SUPPORTED(PLL) 422 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe) 423 { 424 static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d }; 425 static u8 mt352_reset[] = { 0x50, 0x80 }; 426 static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; 427 static u8 mt352_agc_cfg[] = { 0x67, 0x28, 0xa1 }; 428 static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; 429 430 mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); 431 udelay(2000); 432 mt352_write(fe, mt352_reset, sizeof(mt352_reset)); 433 mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); 434 mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); 435 mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); 436 return 0; 437 } 438 439 static struct mt352_config samsung_tdtc9251dh0_config = { 440 .demod_address = 0x0f, 441 .demod_init = samsung_tdtc9251dh0_demod_init, 442 }; 443 444 static int airstar_dvbt_attach(struct flexcop_device *fc, 445 struct i2c_adapter *i2c) 446 { 447 fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, i2c); 448 if (!fc->fe) 449 return 0; 450 451 return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, 452 DVB_PLL_SAMSUNG_TDTC9251DH0); 453 } 454 #else 455 #define airstar_dvbt_attach NULL 456 #endif 457 458 /* AirStar ATSC 1st generation */ 459 #if FE_SUPPORTED(BCM3510) 460 static struct bcm3510_config air2pc_atsc_first_gen_config = { 461 .demod_address = 0x0f, 462 .request_firmware = flexcop_fe_request_firmware, 463 }; 464 465 static int airstar_atsc1_attach(struct flexcop_device *fc, 466 struct i2c_adapter *i2c) 467 { 468 fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c); 469 return fc->fe != NULL; 470 } 471 #else 472 #define airstar_atsc1_attach NULL 473 #endif 474 475 /* AirStar ATSC 2nd generation */ 476 #if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL) 477 static const struct nxt200x_config samsung_tbmv_config = { 478 .demod_address = 0x0a, 479 }; 480 481 static int airstar_atsc2_attach(struct flexcop_device *fc, 482 struct i2c_adapter *i2c) 483 { 484 fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, i2c); 485 if (!fc->fe) 486 return 0; 487 488 return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, 489 DVB_PLL_SAMSUNG_TBMV); 490 } 491 #else 492 #define airstar_atsc2_attach NULL 493 #endif 494 495 /* AirStar ATSC 3rd generation */ 496 #if FE_SUPPORTED(LGDT330X) 497 static struct lgdt330x_config air2pc_atsc_hd5000_config = { 498 .demod_chip = LGDT3303, 499 .serial_mpeg = 0x04, 500 .clock_polarity_flip = 1, 501 }; 502 503 static int airstar_atsc3_attach(struct flexcop_device *fc, 504 struct i2c_adapter *i2c) 505 { 506 fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, 507 0x59, i2c); 508 if (!fc->fe) 509 return 0; 510 511 return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61, 512 TUNER_LG_TDVS_H06XF); 513 } 514 #else 515 #define airstar_atsc3_attach NULL 516 #endif 517 518 /* CableStar2 DVB-C */ 519 #if FE_SUPPORTED(STV0297) && FE_SUPPORTED(PLL) 520 static u8 alps_tdee4_stv0297_inittab[] = { 521 0x80, 0x01, 522 0x80, 0x00, 523 0x81, 0x01, 524 0x81, 0x00, 525 0x00, 0x48, 526 0x01, 0x58, 527 0x03, 0x00, 528 0x04, 0x00, 529 0x07, 0x00, 530 0x08, 0x00, 531 0x30, 0xff, 532 0x31, 0x9d, 533 0x32, 0xff, 534 0x33, 0x00, 535 0x34, 0x29, 536 0x35, 0x55, 537 0x36, 0x80, 538 0x37, 0x6e, 539 0x38, 0x9c, 540 0x40, 0x1a, 541 0x41, 0xfe, 542 0x42, 0x33, 543 0x43, 0x00, 544 0x44, 0xff, 545 0x45, 0x00, 546 0x46, 0x00, 547 0x49, 0x04, 548 0x4a, 0x51, 549 0x4b, 0xf8, 550 0x52, 0x30, 551 0x53, 0x06, 552 0x59, 0x06, 553 0x5a, 0x5e, 554 0x5b, 0x04, 555 0x61, 0x49, 556 0x62, 0x0a, 557 0x70, 0xff, 558 0x71, 0x04, 559 0x72, 0x00, 560 0x73, 0x00, 561 0x74, 0x0c, 562 0x80, 0x20, 563 0x81, 0x00, 564 0x82, 0x30, 565 0x83, 0x00, 566 0x84, 0x04, 567 0x85, 0x22, 568 0x86, 0x08, 569 0x87, 0x1b, 570 0x88, 0x00, 571 0x89, 0x00, 572 0x90, 0x00, 573 0x91, 0x04, 574 0xa0, 0x86, 575 0xa1, 0x00, 576 0xa2, 0x00, 577 0xb0, 0x91, 578 0xb1, 0x0b, 579 0xc0, 0x5b, 580 0xc1, 0x10, 581 0xc2, 0x12, 582 0xd0, 0x02, 583 0xd1, 0x00, 584 0xd2, 0x00, 585 0xd3, 0x00, 586 0xd4, 0x02, 587 0xd5, 0x00, 588 0xde, 0x00, 589 0xdf, 0x01, 590 0xff, 0xff, 591 }; 592 593 static struct stv0297_config alps_tdee4_stv0297_config = { 594 .demod_address = 0x1c, 595 .inittab = alps_tdee4_stv0297_inittab, 596 }; 597 598 static int cablestar2_attach(struct flexcop_device *fc, 599 struct i2c_adapter *i2c) 600 { 601 fc->fc_i2c_adap[0].no_base_addr = 1; 602 fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c); 603 if (!fc->fe) 604 goto fail; 605 606 /* This tuner doesn't use the stv0297's I2C gate, but instead the 607 * tuner is connected to a different flexcop I2C adapter. */ 608 if (fc->fe->ops.i2c_gate_ctrl) 609 fc->fe->ops.i2c_gate_ctrl(fc->fe, 0); 610 fc->fe->ops.i2c_gate_ctrl = NULL; 611 612 if (!dvb_attach(dvb_pll_attach, fc->fe, 0x61, 613 &fc->fc_i2c_adap[2].i2c_adap, DVB_PLL_TDEE4)) 614 goto fail; 615 616 return 1; 617 618 fail: 619 /* Reset for next frontend to try */ 620 fc->fc_i2c_adap[0].no_base_addr = 0; 621 return 0; 622 } 623 #else 624 #define cablestar2_attach NULL 625 #endif 626 627 /* SkyStar S2 PCI DVB-S/S2 card based on Conexant cx24120/cx24118 */ 628 #if FE_SUPPORTED(CX24120) && FE_SUPPORTED(ISL6421) 629 static const struct cx24120_config skystar2_rev3_3_cx24120_config = { 630 .i2c_addr = 0x55, 631 .xtal_khz = 10111, 632 .initial_mpeg_config = { 0xa1, 0x76, 0x07 }, 633 .request_firmware = flexcop_fe_request_firmware, 634 .i2c_wr_max = 4, 635 }; 636 637 static int skystarS2_rev33_attach(struct flexcop_device *fc, 638 struct i2c_adapter *i2c) 639 { 640 fc->fe = dvb_attach(cx24120_attach, 641 &skystar2_rev3_3_cx24120_config, i2c); 642 if (!fc->fe) 643 return 0; 644 645 fc->dev_type = FC_SKYS2_REV33; 646 fc->fc_i2c_adap[2].no_base_addr = 1; 647 if (!dvb_attach(isl6421_attach, fc->fe, &fc->fc_i2c_adap[2].i2c_adap, 648 0x08, 0, 0, false)) { 649 err("ISL6421 could NOT be attached!"); 650 fc->fc_i2c_adap[2].no_base_addr = 0; 651 return 0; 652 } 653 info("ISL6421 successfully attached."); 654 655 if (fc->has_32_hw_pid_filter) 656 fc->skip_6_hw_pid_filter = 1; 657 658 return 1; 659 } 660 #else 661 #define skystarS2_rev33_attach NULL 662 #endif 663 664 static struct { 665 flexcop_device_type_t type; 666 int (*attach)(struct flexcop_device *, struct i2c_adapter *); 667 } flexcop_frontends[] = { 668 { FC_SKY_REV27, skystar2_rev27_attach }, 669 { FC_SKY_REV28, skystar2_rev28_attach }, 670 { FC_SKY_REV26, skystar2_rev26_attach }, 671 { FC_AIR_DVBT, airstar_dvbt_attach }, 672 { FC_AIR_ATSC2, airstar_atsc2_attach }, 673 { FC_AIR_ATSC3, airstar_atsc3_attach }, 674 { FC_AIR_ATSC1, airstar_atsc1_attach }, 675 { FC_CABLE, cablestar2_attach }, 676 { FC_SKY_REV23, skystar2_rev23_attach }, 677 { FC_SKYS2_REV33, skystarS2_rev33_attach }, 678 }; 679 680 /* try to figure out the frontend */ 681 int flexcop_frontend_init(struct flexcop_device *fc) 682 { 683 int i; 684 for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) { 685 if (!flexcop_frontends[i].attach) 686 continue; 687 /* type needs to be set before, because of some workarounds 688 * done based on the probed card type */ 689 fc->dev_type = flexcop_frontends[i].type; 690 if (flexcop_frontends[i].attach(fc, &fc->fc_i2c_adap[0].i2c_adap)) 691 goto fe_found; 692 /* Clean up partially attached frontend */ 693 if (fc->fe) { 694 dvb_frontend_detach(fc->fe); 695 fc->fe = NULL; 696 } 697 } 698 fc->dev_type = FC_UNK; 699 err("no frontend driver found for this B2C2/FlexCop adapter"); 700 return -ENODEV; 701 702 fe_found: 703 info("found '%s' .", fc->fe->ops.info.name); 704 if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { 705 err("frontend registration failed!"); 706 dvb_frontend_detach(fc->fe); 707 fc->fe = NULL; 708 return -EINVAL; 709 } 710 fc->init_state |= FC_STATE_FE_INIT; 711 return 0; 712 } 713 714 void flexcop_frontend_exit(struct flexcop_device *fc) 715 { 716 if (fc->init_state & FC_STATE_FE_INIT) { 717 dvb_unregister_frontend(fc->fe); 718 dvb_frontend_detach(fc->fe); 719 } 720 fc->init_state &= ~FC_STATE_FE_INIT; 721 } 722