1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2010-2011 Neil Brown 4 * Copyright (C) 2010-2018 Red Hat, Inc. All rights reserved. 5 * 6 * This file is released under the GPL. 7 */ 8 9 #include <linux/slab.h> 10 #include <linux/module.h> 11 12 #include "md.h" 13 #include "raid1.h" 14 #include "raid5.h" 15 #include "raid10.h" 16 #include "md-bitmap.h" 17 18 #include <linux/device-mapper.h> 19 20 #define DM_MSG_PREFIX "raid" 21 #define MAX_RAID_DEVICES 253 /* md-raid kernel limit */ 22 23 /* 24 * Minimum sectors of free reshape space per raid device 25 */ 26 #define MIN_FREE_RESHAPE_SPACE to_sector(4*4096) 27 28 /* 29 * Minimum journal space 4 MiB in sectors. 30 */ 31 #define MIN_RAID456_JOURNAL_SPACE (4*2048) 32 33 static bool devices_handle_discard_safely; 34 35 /* 36 * The following flags are used by dm-raid to set up the array state. 37 * They must be cleared before md_run is called. 38 */ 39 #define FirstUse 10 /* rdev flag */ 40 41 struct raid_dev { 42 /* 43 * Two DM devices, one to hold metadata and one to hold the 44 * actual data/parity. The reason for this is to not confuse 45 * ti->len and give more flexibility in altering size and 46 * characteristics. 47 * 48 * While it is possible for this device to be associated 49 * with a different physical device than the data_dev, it 50 * is intended for it to be the same. 51 * |--------- Physical Device ---------| 52 * |- meta_dev -|------ data_dev ------| 53 */ 54 struct dm_dev *meta_dev; 55 struct dm_dev *data_dev; 56 struct md_rdev rdev; 57 }; 58 59 /* 60 * Bits for establishing rs->ctr_flags 61 * 62 * 1 = no flag value 63 * 2 = flag with value 64 */ 65 #define __CTR_FLAG_SYNC 0 /* 1 */ /* Not with raid0! */ 66 #define __CTR_FLAG_NOSYNC 1 /* 1 */ /* Not with raid0! */ 67 #define __CTR_FLAG_REBUILD 2 /* 2 */ /* Not with raid0! */ 68 #define __CTR_FLAG_DAEMON_SLEEP 3 /* 2 */ /* Not with raid0! */ 69 #define __CTR_FLAG_MIN_RECOVERY_RATE 4 /* 2 */ /* Not with raid0! */ 70 #define __CTR_FLAG_MAX_RECOVERY_RATE 5 /* 2 */ /* Not with raid0! */ 71 #define __CTR_FLAG_MAX_WRITE_BEHIND 6 /* 2 */ /* Only with raid1! */ 72 #define __CTR_FLAG_WRITE_MOSTLY 7 /* 2 */ /* Only with raid1! */ 73 #define __CTR_FLAG_STRIPE_CACHE 8 /* 2 */ /* Only with raid4/5/6! */ 74 #define __CTR_FLAG_REGION_SIZE 9 /* 2 */ /* Not with raid0! */ 75 #define __CTR_FLAG_RAID10_COPIES 10 /* 2 */ /* Only with raid10 */ 76 #define __CTR_FLAG_RAID10_FORMAT 11 /* 2 */ /* Only with raid10 */ 77 /* New for v1.9.0 */ 78 #define __CTR_FLAG_DELTA_DISKS 12 /* 2 */ /* Only with reshapable raid1/4/5/6/10! */ 79 #define __CTR_FLAG_DATA_OFFSET 13 /* 2 */ /* Only with reshapable raid4/5/6/10! */ 80 #define __CTR_FLAG_RAID10_USE_NEAR_SETS 14 /* 2 */ /* Only with raid10! */ 81 82 /* New for v1.10.0 */ 83 #define __CTR_FLAG_JOURNAL_DEV 15 /* 2 */ /* Only with raid4/5/6 (journal device)! */ 84 85 /* New for v1.11.1 */ 86 #define __CTR_FLAG_JOURNAL_MODE 16 /* 2 */ /* Only with raid4/5/6 (journal mode)! */ 87 88 /* 89 * Flags for rs->ctr_flags field. 90 */ 91 #define CTR_FLAG_SYNC (1 << __CTR_FLAG_SYNC) 92 #define CTR_FLAG_NOSYNC (1 << __CTR_FLAG_NOSYNC) 93 #define CTR_FLAG_REBUILD (1 << __CTR_FLAG_REBUILD) 94 #define CTR_FLAG_DAEMON_SLEEP (1 << __CTR_FLAG_DAEMON_SLEEP) 95 #define CTR_FLAG_MIN_RECOVERY_RATE (1 << __CTR_FLAG_MIN_RECOVERY_RATE) 96 #define CTR_FLAG_MAX_RECOVERY_RATE (1 << __CTR_FLAG_MAX_RECOVERY_RATE) 97 #define CTR_FLAG_MAX_WRITE_BEHIND (1 << __CTR_FLAG_MAX_WRITE_BEHIND) 98 #define CTR_FLAG_WRITE_MOSTLY (1 << __CTR_FLAG_WRITE_MOSTLY) 99 #define CTR_FLAG_STRIPE_CACHE (1 << __CTR_FLAG_STRIPE_CACHE) 100 #define CTR_FLAG_REGION_SIZE (1 << __CTR_FLAG_REGION_SIZE) 101 #define CTR_FLAG_RAID10_COPIES (1 << __CTR_FLAG_RAID10_COPIES) 102 #define CTR_FLAG_RAID10_FORMAT (1 << __CTR_FLAG_RAID10_FORMAT) 103 #define CTR_FLAG_DELTA_DISKS (1 << __CTR_FLAG_DELTA_DISKS) 104 #define CTR_FLAG_DATA_OFFSET (1 << __CTR_FLAG_DATA_OFFSET) 105 #define CTR_FLAG_RAID10_USE_NEAR_SETS (1 << __CTR_FLAG_RAID10_USE_NEAR_SETS) 106 #define CTR_FLAG_JOURNAL_DEV (1 << __CTR_FLAG_JOURNAL_DEV) 107 #define CTR_FLAG_JOURNAL_MODE (1 << __CTR_FLAG_JOURNAL_MODE) 108 109 /* 110 * Definitions of various constructor flags to 111 * be used in checks of valid / invalid flags 112 * per raid level. 113 */ 114 /* Define all any sync flags */ 115 #define CTR_FLAGS_ANY_SYNC (CTR_FLAG_SYNC | CTR_FLAG_NOSYNC) 116 117 /* Define flags for options without argument (e.g. 'nosync') */ 118 #define CTR_FLAG_OPTIONS_NO_ARGS (CTR_FLAGS_ANY_SYNC | \ 119 CTR_FLAG_RAID10_USE_NEAR_SETS) 120 121 /* Define flags for options with one argument (e.g. 'delta_disks +2') */ 122 #define CTR_FLAG_OPTIONS_ONE_ARG (CTR_FLAG_REBUILD | \ 123 CTR_FLAG_WRITE_MOSTLY | \ 124 CTR_FLAG_DAEMON_SLEEP | \ 125 CTR_FLAG_MIN_RECOVERY_RATE | \ 126 CTR_FLAG_MAX_RECOVERY_RATE | \ 127 CTR_FLAG_MAX_WRITE_BEHIND | \ 128 CTR_FLAG_STRIPE_CACHE | \ 129 CTR_FLAG_REGION_SIZE | \ 130 CTR_FLAG_RAID10_COPIES | \ 131 CTR_FLAG_RAID10_FORMAT | \ 132 CTR_FLAG_DELTA_DISKS | \ 133 CTR_FLAG_DATA_OFFSET | \ 134 CTR_FLAG_JOURNAL_DEV | \ 135 CTR_FLAG_JOURNAL_MODE) 136 137 /* Valid options definitions per raid level... */ 138 139 /* "raid0" does only accept data offset */ 140 #define RAID0_VALID_FLAGS (CTR_FLAG_DATA_OFFSET) 141 142 /* "raid1" does not accept stripe cache, data offset, delta_disks or any raid10 options */ 143 #define RAID1_VALID_FLAGS (CTR_FLAGS_ANY_SYNC | \ 144 CTR_FLAG_REBUILD | \ 145 CTR_FLAG_WRITE_MOSTLY | \ 146 CTR_FLAG_DAEMON_SLEEP | \ 147 CTR_FLAG_MIN_RECOVERY_RATE | \ 148 CTR_FLAG_MAX_RECOVERY_RATE | \ 149 CTR_FLAG_MAX_WRITE_BEHIND | \ 150 CTR_FLAG_REGION_SIZE | \ 151 CTR_FLAG_DELTA_DISKS | \ 152 CTR_FLAG_DATA_OFFSET) 153 154 /* "raid10" does not accept any raid1 or stripe cache options */ 155 #define RAID10_VALID_FLAGS (CTR_FLAGS_ANY_SYNC | \ 156 CTR_FLAG_REBUILD | \ 157 CTR_FLAG_DAEMON_SLEEP | \ 158 CTR_FLAG_MIN_RECOVERY_RATE | \ 159 CTR_FLAG_MAX_RECOVERY_RATE | \ 160 CTR_FLAG_REGION_SIZE | \ 161 CTR_FLAG_RAID10_COPIES | \ 162 CTR_FLAG_RAID10_FORMAT | \ 163 CTR_FLAG_DELTA_DISKS | \ 164 CTR_FLAG_DATA_OFFSET | \ 165 CTR_FLAG_RAID10_USE_NEAR_SETS) 166 167 /* 168 * "raid4/5/6" do not accept any raid1 or raid10 specific options 169 * 170 * "raid6" does not accept "nosync", because it is not guaranteed 171 * that both parity and q-syndrome are being written properly with 172 * any writes 173 */ 174 #define RAID45_VALID_FLAGS (CTR_FLAGS_ANY_SYNC | \ 175 CTR_FLAG_REBUILD | \ 176 CTR_FLAG_DAEMON_SLEEP | \ 177 CTR_FLAG_MIN_RECOVERY_RATE | \ 178 CTR_FLAG_MAX_RECOVERY_RATE | \ 179 CTR_FLAG_STRIPE_CACHE | \ 180 CTR_FLAG_REGION_SIZE | \ 181 CTR_FLAG_DELTA_DISKS | \ 182 CTR_FLAG_DATA_OFFSET | \ 183 CTR_FLAG_JOURNAL_DEV | \ 184 CTR_FLAG_JOURNAL_MODE) 185 186 #define RAID6_VALID_FLAGS (CTR_FLAG_SYNC | \ 187 CTR_FLAG_REBUILD | \ 188 CTR_FLAG_DAEMON_SLEEP | \ 189 CTR_FLAG_MIN_RECOVERY_RATE | \ 190 CTR_FLAG_MAX_RECOVERY_RATE | \ 191 CTR_FLAG_STRIPE_CACHE | \ 192 CTR_FLAG_REGION_SIZE | \ 193 CTR_FLAG_DELTA_DISKS | \ 194 CTR_FLAG_DATA_OFFSET | \ 195 CTR_FLAG_JOURNAL_DEV | \ 196 CTR_FLAG_JOURNAL_MODE) 197 /* ...valid options definitions per raid level */ 198 199 /* 200 * Flags for rs->runtime_flags field 201 * (RT_FLAG prefix meaning "runtime flag") 202 * 203 * These are all internal and used to define runtime state, 204 * e.g. to prevent another resume from preresume processing 205 * the raid set all over again. 206 */ 207 #define RT_FLAG_RS_PRERESUMED 0 208 #define RT_FLAG_RS_RESUMED 1 209 #define RT_FLAG_RS_BITMAP_LOADED 2 210 #define RT_FLAG_UPDATE_SBS 3 211 #define RT_FLAG_RESHAPE_RS 4 212 #define RT_FLAG_RS_SUSPENDED 5 213 #define RT_FLAG_RS_IN_SYNC 6 214 #define RT_FLAG_RS_RESYNCING 7 215 #define RT_FLAG_RS_GROW 8 216 217 /* Array elements of 64 bit needed for rebuild/failed disk bits */ 218 #define DISKS_ARRAY_ELEMS ((MAX_RAID_DEVICES + (sizeof(uint64_t) * 8 - 1)) / sizeof(uint64_t) / 8) 219 220 /* 221 * raid set level, layout and chunk sectors backup/restore 222 */ 223 struct rs_layout { 224 int new_level; 225 int new_layout; 226 int new_chunk_sectors; 227 }; 228 229 struct raid_set { 230 struct dm_target *ti; 231 232 uint32_t stripe_cache_entries; 233 unsigned long ctr_flags; 234 unsigned long runtime_flags; 235 236 uint64_t rebuild_disks[DISKS_ARRAY_ELEMS]; 237 238 int raid_disks; 239 int delta_disks; 240 int data_offset; 241 int raid10_copies; 242 int requested_bitmap_chunk_sectors; 243 244 struct mddev md; 245 struct raid_type *raid_type; 246 247 sector_t array_sectors; 248 sector_t dev_sectors; 249 250 /* Optional raid4/5/6 journal device */ 251 struct journal_dev { 252 struct dm_dev *dev; 253 struct md_rdev rdev; 254 int mode; 255 } journal_dev; 256 257 struct raid_dev dev[]; 258 }; 259 260 static void rs_config_backup(struct raid_set *rs, struct rs_layout *l) 261 { 262 struct mddev *mddev = &rs->md; 263 264 l->new_level = mddev->new_level; 265 l->new_layout = mddev->new_layout; 266 l->new_chunk_sectors = mddev->new_chunk_sectors; 267 } 268 269 static void rs_config_restore(struct raid_set *rs, struct rs_layout *l) 270 { 271 struct mddev *mddev = &rs->md; 272 273 mddev->new_level = l->new_level; 274 mddev->new_layout = l->new_layout; 275 mddev->new_chunk_sectors = l->new_chunk_sectors; 276 } 277 278 /* raid10 algorithms (i.e. formats) */ 279 #define ALGORITHM_RAID10_DEFAULT 0 280 #define ALGORITHM_RAID10_NEAR 1 281 #define ALGORITHM_RAID10_OFFSET 2 282 #define ALGORITHM_RAID10_FAR 3 283 284 /* Supported raid types and properties. */ 285 static struct raid_type { 286 const char *name; /* RAID algorithm. */ 287 const char *descr; /* Descriptor text for logging. */ 288 const unsigned int parity_devs; /* # of parity devices. */ 289 const unsigned int minimal_devs;/* minimal # of devices in set. */ 290 const unsigned int level; /* RAID level. */ 291 const unsigned int algorithm; /* RAID algorithm. */ 292 } raid_types[] = { 293 {"raid0", "raid0 (striping)", 0, 2, 0, 0 /* NONE */}, 294 {"raid1", "raid1 (mirroring)", 0, 2, 1, 0 /* NONE */}, 295 {"raid10_far", "raid10 far (striped mirrors)", 0, 2, 10, ALGORITHM_RAID10_FAR}, 296 {"raid10_offset", "raid10 offset (striped mirrors)", 0, 2, 10, ALGORITHM_RAID10_OFFSET}, 297 {"raid10_near", "raid10 near (striped mirrors)", 0, 2, 10, ALGORITHM_RAID10_NEAR}, 298 {"raid10", "raid10 (striped mirrors)", 0, 2, 10, ALGORITHM_RAID10_DEFAULT}, 299 {"raid4", "raid4 (dedicated first parity disk)", 1, 2, 5, ALGORITHM_PARITY_0}, /* raid4 layout = raid5_0 */ 300 {"raid5_n", "raid5 (dedicated last parity disk)", 1, 2, 5, ALGORITHM_PARITY_N}, 301 {"raid5_ls", "raid5 (left symmetric)", 1, 2, 5, ALGORITHM_LEFT_SYMMETRIC}, 302 {"raid5_rs", "raid5 (right symmetric)", 1, 2, 5, ALGORITHM_RIGHT_SYMMETRIC}, 303 {"raid5_la", "raid5 (left asymmetric)", 1, 2, 5, ALGORITHM_LEFT_ASYMMETRIC}, 304 {"raid5_ra", "raid5 (right asymmetric)", 1, 2, 5, ALGORITHM_RIGHT_ASYMMETRIC}, 305 {"raid6_zr", "raid6 (zero restart)", 2, 4, 6, ALGORITHM_ROTATING_ZERO_RESTART}, 306 {"raid6_nr", "raid6 (N restart)", 2, 4, 6, ALGORITHM_ROTATING_N_RESTART}, 307 {"raid6_nc", "raid6 (N continue)", 2, 4, 6, ALGORITHM_ROTATING_N_CONTINUE}, 308 {"raid6_n_6", "raid6 (dedicated parity/Q n/6)", 2, 4, 6, ALGORITHM_PARITY_N_6}, 309 {"raid6_ls_6", "raid6 (left symmetric dedicated Q 6)", 2, 4, 6, ALGORITHM_LEFT_SYMMETRIC_6}, 310 {"raid6_rs_6", "raid6 (right symmetric dedicated Q 6)", 2, 4, 6, ALGORITHM_RIGHT_SYMMETRIC_6}, 311 {"raid6_la_6", "raid6 (left asymmetric dedicated Q 6)", 2, 4, 6, ALGORITHM_LEFT_ASYMMETRIC_6}, 312 {"raid6_ra_6", "raid6 (right asymmetric dedicated Q 6)", 2, 4, 6, ALGORITHM_RIGHT_ASYMMETRIC_6} 313 }; 314 315 /* True, if @v is in inclusive range [@min, @max] */ 316 static bool __within_range(long v, long min, long max) 317 { 318 return v >= min && v <= max; 319 } 320 321 /* All table line arguments are defined here */ 322 static struct arg_name_flag { 323 const unsigned long flag; 324 const char *name; 325 } __arg_name_flags[] = { 326 { CTR_FLAG_SYNC, "sync"}, 327 { CTR_FLAG_NOSYNC, "nosync"}, 328 { CTR_FLAG_REBUILD, "rebuild"}, 329 { CTR_FLAG_DAEMON_SLEEP, "daemon_sleep"}, 330 { CTR_FLAG_MIN_RECOVERY_RATE, "min_recovery_rate"}, 331 { CTR_FLAG_MAX_RECOVERY_RATE, "max_recovery_rate"}, 332 { CTR_FLAG_MAX_WRITE_BEHIND, "max_write_behind"}, 333 { CTR_FLAG_WRITE_MOSTLY, "write_mostly"}, 334 { CTR_FLAG_STRIPE_CACHE, "stripe_cache"}, 335 { CTR_FLAG_REGION_SIZE, "region_size"}, 336 { CTR_FLAG_RAID10_COPIES, "raid10_copies"}, 337 { CTR_FLAG_RAID10_FORMAT, "raid10_format"}, 338 { CTR_FLAG_DATA_OFFSET, "data_offset"}, 339 { CTR_FLAG_DELTA_DISKS, "delta_disks"}, 340 { CTR_FLAG_RAID10_USE_NEAR_SETS, "raid10_use_near_sets"}, 341 { CTR_FLAG_JOURNAL_DEV, "journal_dev" }, 342 { CTR_FLAG_JOURNAL_MODE, "journal_mode" }, 343 }; 344 345 /* Return argument name string for given @flag */ 346 static const char *dm_raid_arg_name_by_flag(const uint32_t flag) 347 { 348 if (hweight32(flag) == 1) { 349 struct arg_name_flag *anf = __arg_name_flags + ARRAY_SIZE(__arg_name_flags); 350 351 while (anf-- > __arg_name_flags) 352 if (flag & anf->flag) 353 return anf->name; 354 355 } else 356 DMERR("%s called with more than one flag!", __func__); 357 358 return NULL; 359 } 360 361 /* Define correlation of raid456 journal cache modes and dm-raid target line parameters */ 362 static struct { 363 const int mode; 364 const char *param; 365 } _raid456_journal_mode[] = { 366 { R5C_JOURNAL_MODE_WRITE_THROUGH, "writethrough" }, 367 { R5C_JOURNAL_MODE_WRITE_BACK, "writeback" } 368 }; 369 370 /* Return MD raid4/5/6 journal mode for dm @journal_mode one */ 371 static int dm_raid_journal_mode_to_md(const char *mode) 372 { 373 int m = ARRAY_SIZE(_raid456_journal_mode); 374 375 while (m--) 376 if (!strcasecmp(mode, _raid456_journal_mode[m].param)) 377 return _raid456_journal_mode[m].mode; 378 379 return -EINVAL; 380 } 381 382 /* Return dm-raid raid4/5/6 journal mode string for @mode */ 383 static const char *md_journal_mode_to_dm_raid(const int mode) 384 { 385 int m = ARRAY_SIZE(_raid456_journal_mode); 386 387 while (m--) 388 if (mode == _raid456_journal_mode[m].mode) 389 return _raid456_journal_mode[m].param; 390 391 return "unknown"; 392 } 393 394 /* 395 * Bool helpers to test for various raid levels of a raid set. 396 * It's level as reported by the superblock rather than 397 * the requested raid_type passed to the constructor. 398 */ 399 /* Return true, if raid set in @rs is raid0 */ 400 static bool rs_is_raid0(struct raid_set *rs) 401 { 402 return !rs->md.level; 403 } 404 405 /* Return true, if raid set in @rs is raid1 */ 406 static bool rs_is_raid1(struct raid_set *rs) 407 { 408 return rs->md.level == 1; 409 } 410 411 /* Return true, if raid set in @rs is raid10 */ 412 static bool rs_is_raid10(struct raid_set *rs) 413 { 414 return rs->md.level == 10; 415 } 416 417 /* Return true, if raid set in @rs is level 6 */ 418 static bool rs_is_raid6(struct raid_set *rs) 419 { 420 return rs->md.level == 6; 421 } 422 423 /* Return true, if raid set in @rs is level 4, 5 or 6 */ 424 static bool rs_is_raid456(struct raid_set *rs) 425 { 426 return __within_range(rs->md.level, 4, 6); 427 } 428 429 /* Return true, if raid set in @rs is reshapable */ 430 static bool __is_raid10_far(int layout); 431 static bool rs_is_reshapable(struct raid_set *rs) 432 { 433 return rs_is_raid456(rs) || 434 (rs_is_raid10(rs) && !__is_raid10_far(rs->md.new_layout)); 435 } 436 437 /* Return true, if raid set in @rs is recovering */ 438 static bool rs_is_recovering(struct raid_set *rs) 439 { 440 return rs->md.recovery_cp < rs->md.dev_sectors; 441 } 442 443 /* Return true, if raid set in @rs is reshaping */ 444 static bool rs_is_reshaping(struct raid_set *rs) 445 { 446 return rs->md.reshape_position != MaxSector; 447 } 448 449 /* 450 * bool helpers to test for various raid levels of a raid type @rt 451 */ 452 453 /* Return true, if raid type in @rt is raid0 */ 454 static bool rt_is_raid0(struct raid_type *rt) 455 { 456 return !rt->level; 457 } 458 459 /* Return true, if raid type in @rt is raid1 */ 460 static bool rt_is_raid1(struct raid_type *rt) 461 { 462 return rt->level == 1; 463 } 464 465 /* Return true, if raid type in @rt is raid10 */ 466 static bool rt_is_raid10(struct raid_type *rt) 467 { 468 return rt->level == 10; 469 } 470 471 /* Return true, if raid type in @rt is raid4/5 */ 472 static bool rt_is_raid45(struct raid_type *rt) 473 { 474 return __within_range(rt->level, 4, 5); 475 } 476 477 /* Return true, if raid type in @rt is raid6 */ 478 static bool rt_is_raid6(struct raid_type *rt) 479 { 480 return rt->level == 6; 481 } 482 483 /* Return true, if raid type in @rt is raid4/5/6 */ 484 static bool rt_is_raid456(struct raid_type *rt) 485 { 486 return __within_range(rt->level, 4, 6); 487 } 488 /* END: raid level bools */ 489 490 /* Return valid ctr flags for the raid level of @rs */ 491 static unsigned long __valid_flags(struct raid_set *rs) 492 { 493 if (rt_is_raid0(rs->raid_type)) 494 return RAID0_VALID_FLAGS; 495 else if (rt_is_raid1(rs->raid_type)) 496 return RAID1_VALID_FLAGS; 497 else if (rt_is_raid10(rs->raid_type)) 498 return RAID10_VALID_FLAGS; 499 else if (rt_is_raid45(rs->raid_type)) 500 return RAID45_VALID_FLAGS; 501 else if (rt_is_raid6(rs->raid_type)) 502 return RAID6_VALID_FLAGS; 503 504 return 0; 505 } 506 507 /* 508 * Check for valid flags set on @rs 509 * 510 * Has to be called after parsing of the ctr flags! 511 */ 512 static int rs_check_for_valid_flags(struct raid_set *rs) 513 { 514 if (rs->ctr_flags & ~__valid_flags(rs)) { 515 rs->ti->error = "Invalid flags combination"; 516 return -EINVAL; 517 } 518 519 return 0; 520 } 521 522 /* MD raid10 bit definitions and helpers */ 523 #define RAID10_OFFSET (1 << 16) /* stripes with data copies area adjacent on devices */ 524 #define RAID10_BROCKEN_USE_FAR_SETS (1 << 17) /* Broken in raid10.c: use sets instead of whole stripe rotation */ 525 #define RAID10_USE_FAR_SETS (1 << 18) /* Use sets instead of whole stripe rotation */ 526 #define RAID10_FAR_COPIES_SHIFT 8 /* raid10 # far copies shift (2nd byte of layout) */ 527 528 /* Return md raid10 near copies for @layout */ 529 static unsigned int __raid10_near_copies(int layout) 530 { 531 return layout & 0xFF; 532 } 533 534 /* Return md raid10 far copies for @layout */ 535 static unsigned int __raid10_far_copies(int layout) 536 { 537 return __raid10_near_copies(layout >> RAID10_FAR_COPIES_SHIFT); 538 } 539 540 /* Return true if md raid10 offset for @layout */ 541 static bool __is_raid10_offset(int layout) 542 { 543 return !!(layout & RAID10_OFFSET); 544 } 545 546 /* Return true if md raid10 near for @layout */ 547 static bool __is_raid10_near(int layout) 548 { 549 return !__is_raid10_offset(layout) && __raid10_near_copies(layout) > 1; 550 } 551 552 /* Return true if md raid10 far for @layout */ 553 static bool __is_raid10_far(int layout) 554 { 555 return !__is_raid10_offset(layout) && __raid10_far_copies(layout) > 1; 556 } 557 558 /* Return md raid10 layout string for @layout */ 559 static const char *raid10_md_layout_to_format(int layout) 560 { 561 /* 562 * Bit 16 stands for "offset" 563 * (i.e. adjacent stripes hold copies) 564 * 565 * Refer to MD's raid10.c for details 566 */ 567 if (__is_raid10_offset(layout)) 568 return "offset"; 569 570 if (__raid10_near_copies(layout) > 1) 571 return "near"; 572 573 if (__raid10_far_copies(layout) > 1) 574 return "far"; 575 576 return "unknown"; 577 } 578 579 /* Return md raid10 algorithm for @name */ 580 static int raid10_name_to_format(const char *name) 581 { 582 if (!strcasecmp(name, "near")) 583 return ALGORITHM_RAID10_NEAR; 584 else if (!strcasecmp(name, "offset")) 585 return ALGORITHM_RAID10_OFFSET; 586 else if (!strcasecmp(name, "far")) 587 return ALGORITHM_RAID10_FAR; 588 589 return -EINVAL; 590 } 591 592 /* Return md raid10 copies for @layout */ 593 static unsigned int raid10_md_layout_to_copies(int layout) 594 { 595 return max(__raid10_near_copies(layout), __raid10_far_copies(layout)); 596 } 597 598 /* Return md raid10 format id for @format string */ 599 static int raid10_format_to_md_layout(struct raid_set *rs, 600 unsigned int algorithm, 601 unsigned int copies) 602 { 603 unsigned int n = 1, f = 1, r = 0; 604 605 /* 606 * MD resilienece flaw: 607 * 608 * enabling use_far_sets for far/offset formats causes copies 609 * to be colocated on the same devs together with their origins! 610 * 611 * -> disable it for now in the definition above 612 */ 613 if (algorithm == ALGORITHM_RAID10_DEFAULT || 614 algorithm == ALGORITHM_RAID10_NEAR) 615 n = copies; 616 617 else if (algorithm == ALGORITHM_RAID10_OFFSET) { 618 f = copies; 619 r = RAID10_OFFSET; 620 if (!test_bit(__CTR_FLAG_RAID10_USE_NEAR_SETS, &rs->ctr_flags)) 621 r |= RAID10_USE_FAR_SETS; 622 623 } else if (algorithm == ALGORITHM_RAID10_FAR) { 624 f = copies; 625 if (!test_bit(__CTR_FLAG_RAID10_USE_NEAR_SETS, &rs->ctr_flags)) 626 r |= RAID10_USE_FAR_SETS; 627 628 } else 629 return -EINVAL; 630 631 return r | (f << RAID10_FAR_COPIES_SHIFT) | n; 632 } 633 /* END: MD raid10 bit definitions and helpers */ 634 635 /* Check for any of the raid10 algorithms */ 636 static bool __got_raid10(struct raid_type *rtp, const int layout) 637 { 638 if (rtp->level == 10) { 639 switch (rtp->algorithm) { 640 case ALGORITHM_RAID10_DEFAULT: 641 case ALGORITHM_RAID10_NEAR: 642 return __is_raid10_near(layout); 643 case ALGORITHM_RAID10_OFFSET: 644 return __is_raid10_offset(layout); 645 case ALGORITHM_RAID10_FAR: 646 return __is_raid10_far(layout); 647 default: 648 break; 649 } 650 } 651 652 return false; 653 } 654 655 /* Return raid_type for @name */ 656 static struct raid_type *get_raid_type(const char *name) 657 { 658 struct raid_type *rtp = raid_types + ARRAY_SIZE(raid_types); 659 660 while (rtp-- > raid_types) 661 if (!strcasecmp(rtp->name, name)) 662 return rtp; 663 664 return NULL; 665 } 666 667 /* Return raid_type for @name based derived from @level and @layout */ 668 static struct raid_type *get_raid_type_by_ll(const int level, const int layout) 669 { 670 struct raid_type *rtp = raid_types + ARRAY_SIZE(raid_types); 671 672 while (rtp-- > raid_types) { 673 /* RAID10 special checks based on @layout flags/properties */ 674 if (rtp->level == level && 675 (__got_raid10(rtp, layout) || rtp->algorithm == layout)) 676 return rtp; 677 } 678 679 return NULL; 680 } 681 682 /* Adjust rdev sectors */ 683 static void rs_set_rdev_sectors(struct raid_set *rs) 684 { 685 struct mddev *mddev = &rs->md; 686 struct md_rdev *rdev; 687 688 /* 689 * raid10 sets rdev->sector to the device size, which 690 * is unintended in case of out-of-place reshaping 691 */ 692 rdev_for_each(rdev, mddev) 693 if (!test_bit(Journal, &rdev->flags)) 694 rdev->sectors = mddev->dev_sectors; 695 } 696 697 /* 698 * Change bdev capacity of @rs in case of a disk add/remove reshape 699 */ 700 static void rs_set_capacity(struct raid_set *rs) 701 { 702 struct gendisk *gendisk = dm_disk(dm_table_get_md(rs->ti->table)); 703 704 set_capacity_and_notify(gendisk, rs->md.array_sectors); 705 } 706 707 /* 708 * Set the mddev properties in @rs to the current 709 * ones retrieved from the freshest superblock 710 */ 711 static void rs_set_cur(struct raid_set *rs) 712 { 713 struct mddev *mddev = &rs->md; 714 715 mddev->new_level = mddev->level; 716 mddev->new_layout = mddev->layout; 717 mddev->new_chunk_sectors = mddev->chunk_sectors; 718 } 719 720 /* 721 * Set the mddev properties in @rs to the new 722 * ones requested by the ctr 723 */ 724 static void rs_set_new(struct raid_set *rs) 725 { 726 struct mddev *mddev = &rs->md; 727 728 mddev->level = mddev->new_level; 729 mddev->layout = mddev->new_layout; 730 mddev->chunk_sectors = mddev->new_chunk_sectors; 731 mddev->raid_disks = rs->raid_disks; 732 mddev->delta_disks = 0; 733 } 734 735 static struct raid_set *raid_set_alloc(struct dm_target *ti, struct raid_type *raid_type, 736 unsigned int raid_devs) 737 { 738 unsigned int i; 739 struct raid_set *rs; 740 741 if (raid_devs <= raid_type->parity_devs) { 742 ti->error = "Insufficient number of devices"; 743 return ERR_PTR(-EINVAL); 744 } 745 746 rs = kzalloc(struct_size(rs, dev, raid_devs), GFP_KERNEL); 747 if (!rs) { 748 ti->error = "Cannot allocate raid context"; 749 return ERR_PTR(-ENOMEM); 750 } 751 752 mddev_init(&rs->md); 753 754 rs->raid_disks = raid_devs; 755 rs->delta_disks = 0; 756 757 rs->ti = ti; 758 rs->raid_type = raid_type; 759 rs->stripe_cache_entries = 256; 760 rs->md.raid_disks = raid_devs; 761 rs->md.level = raid_type->level; 762 rs->md.new_level = rs->md.level; 763 rs->md.layout = raid_type->algorithm; 764 rs->md.new_layout = rs->md.layout; 765 rs->md.delta_disks = 0; 766 rs->md.recovery_cp = MaxSector; 767 768 for (i = 0; i < raid_devs; i++) 769 md_rdev_init(&rs->dev[i].rdev); 770 771 /* 772 * Remaining items to be initialized by further RAID params: 773 * rs->md.persistent 774 * rs->md.external 775 * rs->md.chunk_sectors 776 * rs->md.new_chunk_sectors 777 * rs->md.dev_sectors 778 */ 779 780 return rs; 781 } 782 783 /* Free all @rs allocations */ 784 static void raid_set_free(struct raid_set *rs) 785 { 786 int i; 787 788 if (rs->journal_dev.dev) { 789 md_rdev_clear(&rs->journal_dev.rdev); 790 dm_put_device(rs->ti, rs->journal_dev.dev); 791 } 792 793 for (i = 0; i < rs->raid_disks; i++) { 794 if (rs->dev[i].meta_dev) 795 dm_put_device(rs->ti, rs->dev[i].meta_dev); 796 md_rdev_clear(&rs->dev[i].rdev); 797 if (rs->dev[i].data_dev) 798 dm_put_device(rs->ti, rs->dev[i].data_dev); 799 } 800 801 kfree(rs); 802 } 803 804 /* 805 * For every device we have two words 806 * <meta_dev>: meta device name or '-' if missing 807 * <data_dev>: data device name or '-' if missing 808 * 809 * The following are permitted: 810 * - - 811 * - <data_dev> 812 * <meta_dev> <data_dev> 813 * 814 * The following is not allowed: 815 * <meta_dev> - 816 * 817 * This code parses those words. If there is a failure, 818 * the caller must use raid_set_free() to unwind the operations. 819 */ 820 static int parse_dev_params(struct raid_set *rs, struct dm_arg_set *as) 821 { 822 int i; 823 int rebuild = 0; 824 int metadata_available = 0; 825 int r = 0; 826 const char *arg; 827 828 /* Put off the number of raid devices argument to get to dev pairs */ 829 arg = dm_shift_arg(as); 830 if (!arg) 831 return -EINVAL; 832 833 for (i = 0; i < rs->raid_disks; i++) { 834 rs->dev[i].rdev.raid_disk = i; 835 836 rs->dev[i].meta_dev = NULL; 837 rs->dev[i].data_dev = NULL; 838 839 /* 840 * There are no offsets initially. 841 * Out of place reshape will set them accordingly. 842 */ 843 rs->dev[i].rdev.data_offset = 0; 844 rs->dev[i].rdev.new_data_offset = 0; 845 rs->dev[i].rdev.mddev = &rs->md; 846 847 arg = dm_shift_arg(as); 848 if (!arg) 849 return -EINVAL; 850 851 if (strcmp(arg, "-")) { 852 r = dm_get_device(rs->ti, arg, dm_table_get_mode(rs->ti->table), 853 &rs->dev[i].meta_dev); 854 if (r) { 855 rs->ti->error = "RAID metadata device lookup failure"; 856 return r; 857 } 858 859 rs->dev[i].rdev.sb_page = alloc_page(GFP_KERNEL); 860 if (!rs->dev[i].rdev.sb_page) { 861 rs->ti->error = "Failed to allocate superblock page"; 862 return -ENOMEM; 863 } 864 } 865 866 arg = dm_shift_arg(as); 867 if (!arg) 868 return -EINVAL; 869 870 if (!strcmp(arg, "-")) { 871 if (!test_bit(In_sync, &rs->dev[i].rdev.flags) && 872 (!rs->dev[i].rdev.recovery_offset)) { 873 rs->ti->error = "Drive designated for rebuild not specified"; 874 return -EINVAL; 875 } 876 877 if (rs->dev[i].meta_dev) { 878 rs->ti->error = "No data device supplied with metadata device"; 879 return -EINVAL; 880 } 881 882 continue; 883 } 884 885 r = dm_get_device(rs->ti, arg, dm_table_get_mode(rs->ti->table), 886 &rs->dev[i].data_dev); 887 if (r) { 888 rs->ti->error = "RAID device lookup failure"; 889 return r; 890 } 891 892 if (rs->dev[i].meta_dev) { 893 metadata_available = 1; 894 rs->dev[i].rdev.meta_bdev = rs->dev[i].meta_dev->bdev; 895 } 896 rs->dev[i].rdev.bdev = rs->dev[i].data_dev->bdev; 897 list_add_tail(&rs->dev[i].rdev.same_set, &rs->md.disks); 898 if (!test_bit(In_sync, &rs->dev[i].rdev.flags)) 899 rebuild++; 900 } 901 902 if (rs->journal_dev.dev) 903 list_add_tail(&rs->journal_dev.rdev.same_set, &rs->md.disks); 904 905 if (metadata_available) { 906 rs->md.external = 0; 907 rs->md.persistent = 1; 908 rs->md.major_version = 2; 909 } else if (rebuild && !rs->md.recovery_cp) { 910 /* 911 * Without metadata, we will not be able to tell if the array 912 * is in-sync or not - we must assume it is not. Therefore, 913 * it is impossible to rebuild a drive. 914 * 915 * Even if there is metadata, the on-disk information may 916 * indicate that the array is not in-sync and it will then 917 * fail at that time. 918 * 919 * User could specify 'nosync' option if desperate. 920 */ 921 rs->ti->error = "Unable to rebuild drive while array is not in-sync"; 922 return -EINVAL; 923 } 924 925 return 0; 926 } 927 928 /* 929 * validate_region_size 930 * @rs 931 * @region_size: region size in sectors. If 0, pick a size (4MiB default). 932 * 933 * Set rs->md.bitmap_info.chunksize (which really refers to 'region size'). 934 * Ensure that (ti->len/region_size < 2^21) - required by MD bitmap. 935 * 936 * Returns: 0 on success, -EINVAL on failure. 937 */ 938 static int validate_region_size(struct raid_set *rs, unsigned long region_size) 939 { 940 unsigned long min_region_size = rs->ti->len / (1 << 21); 941 942 if (rs_is_raid0(rs)) 943 return 0; 944 945 if (!region_size) { 946 /* 947 * Choose a reasonable default. All figures in sectors. 948 */ 949 if (min_region_size > (1 << 13)) { 950 /* If not a power of 2, make it the next power of 2 */ 951 region_size = roundup_pow_of_two(min_region_size); 952 DMINFO("Choosing default region size of %lu sectors", 953 region_size); 954 } else { 955 DMINFO("Choosing default region size of 4MiB"); 956 region_size = 1 << 13; /* sectors */ 957 } 958 } else { 959 /* 960 * Validate user-supplied value. 961 */ 962 if (region_size > rs->ti->len) { 963 rs->ti->error = "Supplied region size is too large"; 964 return -EINVAL; 965 } 966 967 if (region_size < min_region_size) { 968 DMERR("Supplied region_size (%lu sectors) below minimum (%lu)", 969 region_size, min_region_size); 970 rs->ti->error = "Supplied region size is too small"; 971 return -EINVAL; 972 } 973 974 if (!is_power_of_2(region_size)) { 975 rs->ti->error = "Region size is not a power of 2"; 976 return -EINVAL; 977 } 978 979 if (region_size < rs->md.chunk_sectors) { 980 rs->ti->error = "Region size is smaller than the chunk size"; 981 return -EINVAL; 982 } 983 } 984 985 /* 986 * Convert sectors to bytes. 987 */ 988 rs->md.bitmap_info.chunksize = to_bytes(region_size); 989 990 return 0; 991 } 992 993 /* 994 * validate_raid_redundancy 995 * @rs 996 * 997 * Determine if there are enough devices in the array that haven't 998 * failed (or are being rebuilt) to form a usable array. 999 * 1000 * Returns: 0 on success, -EINVAL on failure. 1001 */ 1002 static int validate_raid_redundancy(struct raid_set *rs) 1003 { 1004 unsigned int i, rebuild_cnt = 0; 1005 unsigned int rebuilds_per_group = 0, copies, raid_disks; 1006 unsigned int group_size, last_group_start; 1007 1008 for (i = 0; i < rs->raid_disks; i++) 1009 if (!test_bit(FirstUse, &rs->dev[i].rdev.flags) && 1010 ((!test_bit(In_sync, &rs->dev[i].rdev.flags) || 1011 !rs->dev[i].rdev.sb_page))) 1012 rebuild_cnt++; 1013 1014 switch (rs->md.level) { 1015 case 0: 1016 break; 1017 case 1: 1018 if (rebuild_cnt >= rs->md.raid_disks) 1019 goto too_many; 1020 break; 1021 case 4: 1022 case 5: 1023 case 6: 1024 if (rebuild_cnt > rs->raid_type->parity_devs) 1025 goto too_many; 1026 break; 1027 case 10: 1028 copies = raid10_md_layout_to_copies(rs->md.new_layout); 1029 if (copies < 2) { 1030 DMERR("Bogus raid10 data copies < 2!"); 1031 return -EINVAL; 1032 } 1033 1034 if (rebuild_cnt < copies) 1035 break; 1036 1037 /* 1038 * It is possible to have a higher rebuild count for RAID10, 1039 * as long as the failed devices occur in different mirror 1040 * groups (i.e. different stripes). 1041 * 1042 * When checking "near" format, make sure no adjacent devices 1043 * have failed beyond what can be handled. In addition to the 1044 * simple case where the number of devices is a multiple of the 1045 * number of copies, we must also handle cases where the number 1046 * of devices is not a multiple of the number of copies. 1047 * E.g. dev1 dev2 dev3 dev4 dev5 1048 * A A B B C 1049 * C D D E E 1050 */ 1051 raid_disks = min(rs->raid_disks, rs->md.raid_disks); 1052 if (__is_raid10_near(rs->md.new_layout)) { 1053 for (i = 0; i < raid_disks; i++) { 1054 if (!(i % copies)) 1055 rebuilds_per_group = 0; 1056 if ((!rs->dev[i].rdev.sb_page || 1057 !test_bit(In_sync, &rs->dev[i].rdev.flags)) && 1058 (++rebuilds_per_group >= copies)) 1059 goto too_many; 1060 } 1061 break; 1062 } 1063 1064 /* 1065 * When checking "far" and "offset" formats, we need to ensure 1066 * that the device that holds its copy is not also dead or 1067 * being rebuilt. (Note that "far" and "offset" formats only 1068 * support two copies right now. These formats also only ever 1069 * use the 'use_far_sets' variant.) 1070 * 1071 * This check is somewhat complicated by the need to account 1072 * for arrays that are not a multiple of (far) copies. This 1073 * results in the need to treat the last (potentially larger) 1074 * set differently. 1075 */ 1076 group_size = (raid_disks / copies); 1077 last_group_start = (raid_disks / group_size) - 1; 1078 last_group_start *= group_size; 1079 for (i = 0; i < raid_disks; i++) { 1080 if (!(i % copies) && !(i > last_group_start)) 1081 rebuilds_per_group = 0; 1082 if ((!rs->dev[i].rdev.sb_page || 1083 !test_bit(In_sync, &rs->dev[i].rdev.flags)) && 1084 (++rebuilds_per_group >= copies)) 1085 goto too_many; 1086 } 1087 break; 1088 default: 1089 if (rebuild_cnt) 1090 return -EINVAL; 1091 } 1092 1093 return 0; 1094 1095 too_many: 1096 return -EINVAL; 1097 } 1098 1099 /* 1100 * Possible arguments are... 1101 * <chunk_size> [optional_args] 1102 * 1103 * Argument definitions 1104 * <chunk_size> The number of sectors per disk that 1105 * will form the "stripe" 1106 * [[no]sync] Force or prevent recovery of the 1107 * entire array 1108 * [rebuild <idx>] Rebuild the drive indicated by the index 1109 * [daemon_sleep <ms>] Time between bitmap daemon work to 1110 * clear bits 1111 * [min_recovery_rate <kB/sec/disk>] Throttle RAID initialization 1112 * [max_recovery_rate <kB/sec/disk>] Throttle RAID initialization 1113 * [write_mostly <idx>] Indicate a write mostly drive via index 1114 * [max_write_behind <sectors>] See '-write-behind=' (man mdadm) 1115 * [stripe_cache <sectors>] Stripe cache size for higher RAIDs 1116 * [region_size <sectors>] Defines granularity of bitmap 1117 * [journal_dev <dev>] raid4/5/6 journaling deviice 1118 * (i.e. write hole closing log) 1119 * 1120 * RAID10-only options: 1121 * [raid10_copies <# copies>] Number of copies. (Default: 2) 1122 * [raid10_format <near|far|offset>] Layout algorithm. (Default: near) 1123 */ 1124 static int parse_raid_params(struct raid_set *rs, struct dm_arg_set *as, 1125 unsigned int num_raid_params) 1126 { 1127 int value, raid10_format = ALGORITHM_RAID10_DEFAULT; 1128 unsigned int raid10_copies = 2; 1129 unsigned int i, write_mostly = 0; 1130 unsigned int region_size = 0; 1131 sector_t max_io_len; 1132 const char *arg, *key; 1133 struct raid_dev *rd; 1134 struct raid_type *rt = rs->raid_type; 1135 1136 arg = dm_shift_arg(as); 1137 num_raid_params--; /* Account for chunk_size argument */ 1138 1139 if (kstrtoint(arg, 10, &value) < 0) { 1140 rs->ti->error = "Bad numerical argument given for chunk_size"; 1141 return -EINVAL; 1142 } 1143 1144 /* 1145 * First, parse the in-order required arguments 1146 * "chunk_size" is the only argument of this type. 1147 */ 1148 if (rt_is_raid1(rt)) { 1149 if (value) 1150 DMERR("Ignoring chunk size parameter for RAID 1"); 1151 value = 0; 1152 } else if (!is_power_of_2(value)) { 1153 rs->ti->error = "Chunk size must be a power of 2"; 1154 return -EINVAL; 1155 } else if (value < 8) { 1156 rs->ti->error = "Chunk size value is too small"; 1157 return -EINVAL; 1158 } 1159 1160 rs->md.new_chunk_sectors = rs->md.chunk_sectors = value; 1161 1162 /* 1163 * We set each individual device as In_sync with a completed 1164 * 'recovery_offset'. If there has been a device failure or 1165 * replacement then one of the following cases applies: 1166 * 1167 * 1) User specifies 'rebuild'. 1168 * - Device is reset when param is read. 1169 * 2) A new device is supplied. 1170 * - No matching superblock found, resets device. 1171 * 3) Device failure was transient and returns on reload. 1172 * - Failure noticed, resets device for bitmap replay. 1173 * 4) Device hadn't completed recovery after previous failure. 1174 * - Superblock is read and overrides recovery_offset. 1175 * 1176 * What is found in the superblocks of the devices is always 1177 * authoritative, unless 'rebuild' or '[no]sync' was specified. 1178 */ 1179 for (i = 0; i < rs->raid_disks; i++) { 1180 set_bit(In_sync, &rs->dev[i].rdev.flags); 1181 rs->dev[i].rdev.recovery_offset = MaxSector; 1182 } 1183 1184 /* 1185 * Second, parse the unordered optional arguments 1186 */ 1187 for (i = 0; i < num_raid_params; i++) { 1188 key = dm_shift_arg(as); 1189 if (!key) { 1190 rs->ti->error = "Not enough raid parameters given"; 1191 return -EINVAL; 1192 } 1193 1194 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_NOSYNC))) { 1195 if (test_and_set_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags)) { 1196 rs->ti->error = "Only one 'nosync' argument allowed"; 1197 return -EINVAL; 1198 } 1199 continue; 1200 } 1201 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_SYNC))) { 1202 if (test_and_set_bit(__CTR_FLAG_SYNC, &rs->ctr_flags)) { 1203 rs->ti->error = "Only one 'sync' argument allowed"; 1204 return -EINVAL; 1205 } 1206 continue; 1207 } 1208 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_RAID10_USE_NEAR_SETS))) { 1209 if (test_and_set_bit(__CTR_FLAG_RAID10_USE_NEAR_SETS, &rs->ctr_flags)) { 1210 rs->ti->error = "Only one 'raid10_use_new_sets' argument allowed"; 1211 return -EINVAL; 1212 } 1213 continue; 1214 } 1215 1216 arg = dm_shift_arg(as); 1217 i++; /* Account for the argument pairs */ 1218 if (!arg) { 1219 rs->ti->error = "Wrong number of raid parameters given"; 1220 return -EINVAL; 1221 } 1222 1223 /* 1224 * Parameters that take a string value are checked here. 1225 */ 1226 /* "raid10_format {near|offset|far} */ 1227 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_RAID10_FORMAT))) { 1228 if (test_and_set_bit(__CTR_FLAG_RAID10_FORMAT, &rs->ctr_flags)) { 1229 rs->ti->error = "Only one 'raid10_format' argument pair allowed"; 1230 return -EINVAL; 1231 } 1232 if (!rt_is_raid10(rt)) { 1233 rs->ti->error = "'raid10_format' is an invalid parameter for this RAID type"; 1234 return -EINVAL; 1235 } 1236 raid10_format = raid10_name_to_format(arg); 1237 if (raid10_format < 0) { 1238 rs->ti->error = "Invalid 'raid10_format' value given"; 1239 return raid10_format; 1240 } 1241 continue; 1242 } 1243 1244 /* "journal_dev <dev>" */ 1245 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_JOURNAL_DEV))) { 1246 int r; 1247 struct md_rdev *jdev; 1248 1249 if (test_and_set_bit(__CTR_FLAG_JOURNAL_DEV, &rs->ctr_flags)) { 1250 rs->ti->error = "Only one raid4/5/6 set journaling device allowed"; 1251 return -EINVAL; 1252 } 1253 if (!rt_is_raid456(rt)) { 1254 rs->ti->error = "'journal_dev' is an invalid parameter for this RAID type"; 1255 return -EINVAL; 1256 } 1257 r = dm_get_device(rs->ti, arg, dm_table_get_mode(rs->ti->table), 1258 &rs->journal_dev.dev); 1259 if (r) { 1260 rs->ti->error = "raid4/5/6 journal device lookup failure"; 1261 return r; 1262 } 1263 jdev = &rs->journal_dev.rdev; 1264 md_rdev_init(jdev); 1265 jdev->mddev = &rs->md; 1266 jdev->bdev = rs->journal_dev.dev->bdev; 1267 jdev->sectors = bdev_nr_sectors(jdev->bdev); 1268 if (jdev->sectors < MIN_RAID456_JOURNAL_SPACE) { 1269 rs->ti->error = "No space for raid4/5/6 journal"; 1270 return -ENOSPC; 1271 } 1272 rs->journal_dev.mode = R5C_JOURNAL_MODE_WRITE_THROUGH; 1273 set_bit(Journal, &jdev->flags); 1274 continue; 1275 } 1276 1277 /* "journal_mode <mode>" ("journal_dev" mandatory!) */ 1278 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_JOURNAL_MODE))) { 1279 int r; 1280 1281 if (!test_bit(__CTR_FLAG_JOURNAL_DEV, &rs->ctr_flags)) { 1282 rs->ti->error = "raid4/5/6 'journal_mode' is invalid without 'journal_dev'"; 1283 return -EINVAL; 1284 } 1285 if (test_and_set_bit(__CTR_FLAG_JOURNAL_MODE, &rs->ctr_flags)) { 1286 rs->ti->error = "Only one raid4/5/6 'journal_mode' argument allowed"; 1287 return -EINVAL; 1288 } 1289 r = dm_raid_journal_mode_to_md(arg); 1290 if (r < 0) { 1291 rs->ti->error = "Invalid 'journal_mode' argument"; 1292 return r; 1293 } 1294 rs->journal_dev.mode = r; 1295 continue; 1296 } 1297 1298 /* 1299 * Parameters with number values from here on. 1300 */ 1301 if (kstrtoint(arg, 10, &value) < 0) { 1302 rs->ti->error = "Bad numerical argument given in raid params"; 1303 return -EINVAL; 1304 } 1305 1306 if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_REBUILD))) { 1307 /* 1308 * "rebuild" is being passed in by userspace to provide 1309 * indexes of replaced devices and to set up additional 1310 * devices on raid level takeover. 1311 */ 1312 if (!__within_range(value, 0, rs->raid_disks - 1)) { 1313 rs->ti->error = "Invalid rebuild index given"; 1314 return -EINVAL; 1315 } 1316 1317 if (test_and_set_bit(value, (void *) rs->rebuild_disks)) { 1318 rs->ti->error = "rebuild for this index already given"; 1319 return -EINVAL; 1320 } 1321 1322 rd = rs->dev + value; 1323 clear_bit(In_sync, &rd->rdev.flags); 1324 clear_bit(Faulty, &rd->rdev.flags); 1325 rd->rdev.recovery_offset = 0; 1326 set_bit(__CTR_FLAG_REBUILD, &rs->ctr_flags); 1327 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_WRITE_MOSTLY))) { 1328 if (!rt_is_raid1(rt)) { 1329 rs->ti->error = "write_mostly option is only valid for RAID1"; 1330 return -EINVAL; 1331 } 1332 1333 if (!__within_range(value, 0, rs->md.raid_disks - 1)) { 1334 rs->ti->error = "Invalid write_mostly index given"; 1335 return -EINVAL; 1336 } 1337 1338 write_mostly++; 1339 set_bit(WriteMostly, &rs->dev[value].rdev.flags); 1340 set_bit(__CTR_FLAG_WRITE_MOSTLY, &rs->ctr_flags); 1341 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_MAX_WRITE_BEHIND))) { 1342 if (!rt_is_raid1(rt)) { 1343 rs->ti->error = "max_write_behind option is only valid for RAID1"; 1344 return -EINVAL; 1345 } 1346 1347 if (test_and_set_bit(__CTR_FLAG_MAX_WRITE_BEHIND, &rs->ctr_flags)) { 1348 rs->ti->error = "Only one max_write_behind argument pair allowed"; 1349 return -EINVAL; 1350 } 1351 1352 /* 1353 * In device-mapper, we specify things in sectors, but 1354 * MD records this value in kB 1355 */ 1356 if (value < 0 || value / 2 > COUNTER_MAX) { 1357 rs->ti->error = "Max write-behind limit out of range"; 1358 return -EINVAL; 1359 } 1360 1361 rs->md.bitmap_info.max_write_behind = value / 2; 1362 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_DAEMON_SLEEP))) { 1363 if (test_and_set_bit(__CTR_FLAG_DAEMON_SLEEP, &rs->ctr_flags)) { 1364 rs->ti->error = "Only one daemon_sleep argument pair allowed"; 1365 return -EINVAL; 1366 } 1367 if (value < 0) { 1368 rs->ti->error = "daemon sleep period out of range"; 1369 return -EINVAL; 1370 } 1371 rs->md.bitmap_info.daemon_sleep = value; 1372 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_DATA_OFFSET))) { 1373 /* Userspace passes new data_offset after having extended the data image LV */ 1374 if (test_and_set_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags)) { 1375 rs->ti->error = "Only one data_offset argument pair allowed"; 1376 return -EINVAL; 1377 } 1378 /* Ensure sensible data offset */ 1379 if (value < 0 || 1380 (value && (value < MIN_FREE_RESHAPE_SPACE || value % to_sector(PAGE_SIZE)))) { 1381 rs->ti->error = "Bogus data_offset value"; 1382 return -EINVAL; 1383 } 1384 rs->data_offset = value; 1385 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_DELTA_DISKS))) { 1386 /* Define the +/-# of disks to add to/remove from the given raid set */ 1387 if (test_and_set_bit(__CTR_FLAG_DELTA_DISKS, &rs->ctr_flags)) { 1388 rs->ti->error = "Only one delta_disks argument pair allowed"; 1389 return -EINVAL; 1390 } 1391 /* Ensure MAX_RAID_DEVICES and raid type minimal_devs! */ 1392 if (!__within_range(abs(value), 1, MAX_RAID_DEVICES - rt->minimal_devs)) { 1393 rs->ti->error = "Too many delta_disk requested"; 1394 return -EINVAL; 1395 } 1396 1397 rs->delta_disks = value; 1398 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_STRIPE_CACHE))) { 1399 if (test_and_set_bit(__CTR_FLAG_STRIPE_CACHE, &rs->ctr_flags)) { 1400 rs->ti->error = "Only one stripe_cache argument pair allowed"; 1401 return -EINVAL; 1402 } 1403 1404 if (!rt_is_raid456(rt)) { 1405 rs->ti->error = "Inappropriate argument: stripe_cache"; 1406 return -EINVAL; 1407 } 1408 1409 if (value < 0) { 1410 rs->ti->error = "Bogus stripe cache entries value"; 1411 return -EINVAL; 1412 } 1413 rs->stripe_cache_entries = value; 1414 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_MIN_RECOVERY_RATE))) { 1415 if (test_and_set_bit(__CTR_FLAG_MIN_RECOVERY_RATE, &rs->ctr_flags)) { 1416 rs->ti->error = "Only one min_recovery_rate argument pair allowed"; 1417 return -EINVAL; 1418 } 1419 1420 if (value < 0) { 1421 rs->ti->error = "min_recovery_rate out of range"; 1422 return -EINVAL; 1423 } 1424 rs->md.sync_speed_min = value; 1425 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_MAX_RECOVERY_RATE))) { 1426 if (test_and_set_bit(__CTR_FLAG_MAX_RECOVERY_RATE, &rs->ctr_flags)) { 1427 rs->ti->error = "Only one max_recovery_rate argument pair allowed"; 1428 return -EINVAL; 1429 } 1430 1431 if (value < 0) { 1432 rs->ti->error = "max_recovery_rate out of range"; 1433 return -EINVAL; 1434 } 1435 rs->md.sync_speed_max = value; 1436 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_REGION_SIZE))) { 1437 if (test_and_set_bit(__CTR_FLAG_REGION_SIZE, &rs->ctr_flags)) { 1438 rs->ti->error = "Only one region_size argument pair allowed"; 1439 return -EINVAL; 1440 } 1441 1442 region_size = value; 1443 rs->requested_bitmap_chunk_sectors = value; 1444 } else if (!strcasecmp(key, dm_raid_arg_name_by_flag(CTR_FLAG_RAID10_COPIES))) { 1445 if (test_and_set_bit(__CTR_FLAG_RAID10_COPIES, &rs->ctr_flags)) { 1446 rs->ti->error = "Only one raid10_copies argument pair allowed"; 1447 return -EINVAL; 1448 } 1449 1450 if (!__within_range(value, 2, rs->md.raid_disks)) { 1451 rs->ti->error = "Bad value for 'raid10_copies'"; 1452 return -EINVAL; 1453 } 1454 1455 raid10_copies = value; 1456 } else { 1457 DMERR("Unable to parse RAID parameter: %s", key); 1458 rs->ti->error = "Unable to parse RAID parameter"; 1459 return -EINVAL; 1460 } 1461 } 1462 1463 if (test_bit(__CTR_FLAG_SYNC, &rs->ctr_flags) && 1464 test_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags)) { 1465 rs->ti->error = "sync and nosync are mutually exclusive"; 1466 return -EINVAL; 1467 } 1468 1469 if (test_bit(__CTR_FLAG_REBUILD, &rs->ctr_flags) && 1470 (test_bit(__CTR_FLAG_SYNC, &rs->ctr_flags) || 1471 test_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags))) { 1472 rs->ti->error = "sync/nosync and rebuild are mutually exclusive"; 1473 return -EINVAL; 1474 } 1475 1476 if (write_mostly >= rs->md.raid_disks) { 1477 rs->ti->error = "Can't set all raid1 devices to write_mostly"; 1478 return -EINVAL; 1479 } 1480 1481 if (rs->md.sync_speed_max && 1482 rs->md.sync_speed_min > rs->md.sync_speed_max) { 1483 rs->ti->error = "Bogus recovery rates"; 1484 return -EINVAL; 1485 } 1486 1487 if (validate_region_size(rs, region_size)) 1488 return -EINVAL; 1489 1490 if (rs->md.chunk_sectors) 1491 max_io_len = rs->md.chunk_sectors; 1492 else 1493 max_io_len = region_size; 1494 1495 if (dm_set_target_max_io_len(rs->ti, max_io_len)) 1496 return -EINVAL; 1497 1498 if (rt_is_raid10(rt)) { 1499 if (raid10_copies > rs->md.raid_disks) { 1500 rs->ti->error = "Not enough devices to satisfy specification"; 1501 return -EINVAL; 1502 } 1503 1504 rs->md.new_layout = raid10_format_to_md_layout(rs, raid10_format, raid10_copies); 1505 if (rs->md.new_layout < 0) { 1506 rs->ti->error = "Error getting raid10 format"; 1507 return rs->md.new_layout; 1508 } 1509 1510 rt = get_raid_type_by_ll(10, rs->md.new_layout); 1511 if (!rt) { 1512 rs->ti->error = "Failed to recognize new raid10 layout"; 1513 return -EINVAL; 1514 } 1515 1516 if ((rt->algorithm == ALGORITHM_RAID10_DEFAULT || 1517 rt->algorithm == ALGORITHM_RAID10_NEAR) && 1518 test_bit(__CTR_FLAG_RAID10_USE_NEAR_SETS, &rs->ctr_flags)) { 1519 rs->ti->error = "RAID10 format 'near' and 'raid10_use_near_sets' are incompatible"; 1520 return -EINVAL; 1521 } 1522 } 1523 1524 rs->raid10_copies = raid10_copies; 1525 1526 /* Assume there are no metadata devices until the drives are parsed */ 1527 rs->md.persistent = 0; 1528 rs->md.external = 1; 1529 1530 /* Check, if any invalid ctr arguments have been passed in for the raid level */ 1531 return rs_check_for_valid_flags(rs); 1532 } 1533 1534 /* Set raid4/5/6 cache size */ 1535 static int rs_set_raid456_stripe_cache(struct raid_set *rs) 1536 { 1537 int r; 1538 struct r5conf *conf; 1539 struct mddev *mddev = &rs->md; 1540 uint32_t min_stripes = max(mddev->chunk_sectors, mddev->new_chunk_sectors) / 2; 1541 uint32_t nr_stripes = rs->stripe_cache_entries; 1542 1543 if (!rt_is_raid456(rs->raid_type)) { 1544 rs->ti->error = "Inappropriate raid level; cannot change stripe_cache size"; 1545 return -EINVAL; 1546 } 1547 1548 if (nr_stripes < min_stripes) { 1549 DMINFO("Adjusting requested %u stripe cache entries to %u to suit stripe size", 1550 nr_stripes, min_stripes); 1551 nr_stripes = min_stripes; 1552 } 1553 1554 conf = mddev->private; 1555 if (!conf) { 1556 rs->ti->error = "Cannot change stripe_cache size on inactive RAID set"; 1557 return -EINVAL; 1558 } 1559 1560 /* Try setting number of stripes in raid456 stripe cache */ 1561 if (conf->min_nr_stripes != nr_stripes) { 1562 r = raid5_set_cache_size(mddev, nr_stripes); 1563 if (r) { 1564 rs->ti->error = "Failed to set raid4/5/6 stripe cache size"; 1565 return r; 1566 } 1567 1568 DMINFO("%u stripe cache entries", nr_stripes); 1569 } 1570 1571 return 0; 1572 } 1573 1574 /* Return # of data stripes as kept in mddev as of @rs (i.e. as of superblock) */ 1575 static unsigned int mddev_data_stripes(struct raid_set *rs) 1576 { 1577 return rs->md.raid_disks - rs->raid_type->parity_devs; 1578 } 1579 1580 /* Return # of data stripes of @rs (i.e. as of ctr) */ 1581 static unsigned int rs_data_stripes(struct raid_set *rs) 1582 { 1583 return rs->raid_disks - rs->raid_type->parity_devs; 1584 } 1585 1586 /* 1587 * Retrieve rdev->sectors from any valid raid device of @rs 1588 * to allow userpace to pass in arbitray "- -" device tupples. 1589 */ 1590 static sector_t __rdev_sectors(struct raid_set *rs) 1591 { 1592 int i; 1593 1594 for (i = 0; i < rs->raid_disks; i++) { 1595 struct md_rdev *rdev = &rs->dev[i].rdev; 1596 1597 if (!test_bit(Journal, &rdev->flags) && 1598 rdev->bdev && rdev->sectors) 1599 return rdev->sectors; 1600 } 1601 1602 return 0; 1603 } 1604 1605 /* Check that calculated dev_sectors fits all component devices. */ 1606 static int _check_data_dev_sectors(struct raid_set *rs) 1607 { 1608 sector_t ds = ~0; 1609 struct md_rdev *rdev; 1610 1611 rdev_for_each(rdev, &rs->md) 1612 if (!test_bit(Journal, &rdev->flags) && rdev->bdev) { 1613 ds = min(ds, bdev_nr_sectors(rdev->bdev)); 1614 if (ds < rs->md.dev_sectors) { 1615 rs->ti->error = "Component device(s) too small"; 1616 return -EINVAL; 1617 } 1618 } 1619 1620 return 0; 1621 } 1622 1623 /* Calculate the sectors per device and per array used for @rs */ 1624 static int rs_set_dev_and_array_sectors(struct raid_set *rs, sector_t sectors, bool use_mddev) 1625 { 1626 int delta_disks; 1627 unsigned int data_stripes; 1628 sector_t array_sectors = sectors, dev_sectors = sectors; 1629 struct mddev *mddev = &rs->md; 1630 1631 if (use_mddev) { 1632 delta_disks = mddev->delta_disks; 1633 data_stripes = mddev_data_stripes(rs); 1634 } else { 1635 delta_disks = rs->delta_disks; 1636 data_stripes = rs_data_stripes(rs); 1637 } 1638 1639 /* Special raid1 case w/o delta_disks support (yet) */ 1640 if (rt_is_raid1(rs->raid_type)) 1641 ; 1642 else if (rt_is_raid10(rs->raid_type)) { 1643 if (rs->raid10_copies < 2 || 1644 delta_disks < 0) { 1645 rs->ti->error = "Bogus raid10 data copies or delta disks"; 1646 return -EINVAL; 1647 } 1648 1649 dev_sectors *= rs->raid10_copies; 1650 if (sector_div(dev_sectors, data_stripes)) 1651 goto bad; 1652 1653 array_sectors = (data_stripes + delta_disks) * dev_sectors; 1654 if (sector_div(array_sectors, rs->raid10_copies)) 1655 goto bad; 1656 1657 } else if (sector_div(dev_sectors, data_stripes)) 1658 goto bad; 1659 1660 else 1661 /* Striped layouts */ 1662 array_sectors = (data_stripes + delta_disks) * dev_sectors; 1663 1664 mddev->array_sectors = array_sectors; 1665 mddev->dev_sectors = dev_sectors; 1666 rs_set_rdev_sectors(rs); 1667 1668 return _check_data_dev_sectors(rs); 1669 bad: 1670 rs->ti->error = "Target length not divisible by number of data devices"; 1671 return -EINVAL; 1672 } 1673 1674 /* Setup recovery on @rs */ 1675 static void rs_setup_recovery(struct raid_set *rs, sector_t dev_sectors) 1676 { 1677 /* raid0 does not recover */ 1678 if (rs_is_raid0(rs)) 1679 rs->md.recovery_cp = MaxSector; 1680 /* 1681 * A raid6 set has to be recovered either 1682 * completely or for the grown part to 1683 * ensure proper parity and Q-Syndrome 1684 */ 1685 else if (rs_is_raid6(rs)) 1686 rs->md.recovery_cp = dev_sectors; 1687 /* 1688 * Other raid set types may skip recovery 1689 * depending on the 'nosync' flag. 1690 */ 1691 else 1692 rs->md.recovery_cp = test_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags) 1693 ? MaxSector : dev_sectors; 1694 } 1695 1696 static void do_table_event(struct work_struct *ws) 1697 { 1698 struct raid_set *rs = container_of(ws, struct raid_set, md.event_work); 1699 1700 smp_rmb(); /* Make sure we access most actual mddev properties */ 1701 if (!rs_is_reshaping(rs)) { 1702 if (rs_is_raid10(rs)) 1703 rs_set_rdev_sectors(rs); 1704 rs_set_capacity(rs); 1705 } 1706 dm_table_event(rs->ti->table); 1707 } 1708 1709 /* 1710 * Make sure a valid takover (level switch) is being requested on @rs 1711 * 1712 * Conversions of raid sets from one MD personality to another 1713 * have to conform to restrictions which are enforced here. 1714 */ 1715 static int rs_check_takeover(struct raid_set *rs) 1716 { 1717 struct mddev *mddev = &rs->md; 1718 unsigned int near_copies; 1719 1720 if (rs->md.degraded) { 1721 rs->ti->error = "Can't takeover degraded raid set"; 1722 return -EPERM; 1723 } 1724 1725 if (rs_is_reshaping(rs)) { 1726 rs->ti->error = "Can't takeover reshaping raid set"; 1727 return -EPERM; 1728 } 1729 1730 switch (mddev->level) { 1731 case 0: 1732 /* raid0 -> raid1/5 with one disk */ 1733 if ((mddev->new_level == 1 || mddev->new_level == 5) && 1734 mddev->raid_disks == 1) 1735 return 0; 1736 1737 /* raid0 -> raid10 */ 1738 if (mddev->new_level == 10 && 1739 !(rs->raid_disks % mddev->raid_disks)) 1740 return 0; 1741 1742 /* raid0 with multiple disks -> raid4/5/6 */ 1743 if (__within_range(mddev->new_level, 4, 6) && 1744 mddev->new_layout == ALGORITHM_PARITY_N && 1745 mddev->raid_disks > 1) 1746 return 0; 1747 1748 break; 1749 1750 case 10: 1751 /* Can't takeover raid10_offset! */ 1752 if (__is_raid10_offset(mddev->layout)) 1753 break; 1754 1755 near_copies = __raid10_near_copies(mddev->layout); 1756 1757 /* raid10* -> raid0 */ 1758 if (mddev->new_level == 0) { 1759 /* Can takeover raid10_near with raid disks divisable by data copies! */ 1760 if (near_copies > 1 && 1761 !(mddev->raid_disks % near_copies)) { 1762 mddev->raid_disks /= near_copies; 1763 mddev->delta_disks = mddev->raid_disks; 1764 return 0; 1765 } 1766 1767 /* Can takeover raid10_far */ 1768 if (near_copies == 1 && 1769 __raid10_far_copies(mddev->layout) > 1) 1770 return 0; 1771 1772 break; 1773 } 1774 1775 /* raid10_{near,far} -> raid1 */ 1776 if (mddev->new_level == 1 && 1777 max(near_copies, __raid10_far_copies(mddev->layout)) == mddev->raid_disks) 1778 return 0; 1779 1780 /* raid10_{near,far} with 2 disks -> raid4/5 */ 1781 if (__within_range(mddev->new_level, 4, 5) && 1782 mddev->raid_disks == 2) 1783 return 0; 1784 break; 1785 1786 case 1: 1787 /* raid1 with 2 disks -> raid4/5 */ 1788 if (__within_range(mddev->new_level, 4, 5) && 1789 mddev->raid_disks == 2) { 1790 mddev->degraded = 1; 1791 return 0; 1792 } 1793 1794 /* raid1 -> raid0 */ 1795 if (mddev->new_level == 0 && 1796 mddev->raid_disks == 1) 1797 return 0; 1798 1799 /* raid1 -> raid10 */ 1800 if (mddev->new_level == 10) 1801 return 0; 1802 break; 1803 1804 case 4: 1805 /* raid4 -> raid0 */ 1806 if (mddev->new_level == 0) 1807 return 0; 1808 1809 /* raid4 -> raid1/5 with 2 disks */ 1810 if ((mddev->new_level == 1 || mddev->new_level == 5) && 1811 mddev->raid_disks == 2) 1812 return 0; 1813 1814 /* raid4 -> raid5/6 with parity N */ 1815 if (__within_range(mddev->new_level, 5, 6) && 1816 mddev->layout == ALGORITHM_PARITY_N) 1817 return 0; 1818 break; 1819 1820 case 5: 1821 /* raid5 with parity N -> raid0 */ 1822 if (mddev->new_level == 0 && 1823 mddev->layout == ALGORITHM_PARITY_N) 1824 return 0; 1825 1826 /* raid5 with parity N -> raid4 */ 1827 if (mddev->new_level == 4 && 1828 mddev->layout == ALGORITHM_PARITY_N) 1829 return 0; 1830 1831 /* raid5 with 2 disks -> raid1/4/10 */ 1832 if ((mddev->new_level == 1 || mddev->new_level == 4 || mddev->new_level == 10) && 1833 mddev->raid_disks == 2) 1834 return 0; 1835 1836 /* raid5_* -> raid6_*_6 with Q-Syndrome N (e.g. raid5_ra -> raid6_ra_6 */ 1837 if (mddev->new_level == 6 && 1838 ((mddev->layout == ALGORITHM_PARITY_N && mddev->new_layout == ALGORITHM_PARITY_N) || 1839 __within_range(mddev->new_layout, ALGORITHM_LEFT_ASYMMETRIC_6, ALGORITHM_RIGHT_SYMMETRIC_6))) 1840 return 0; 1841 break; 1842 1843 case 6: 1844 /* raid6 with parity N -> raid0 */ 1845 if (mddev->new_level == 0 && 1846 mddev->layout == ALGORITHM_PARITY_N) 1847 return 0; 1848 1849 /* raid6 with parity N -> raid4 */ 1850 if (mddev->new_level == 4 && 1851 mddev->layout == ALGORITHM_PARITY_N) 1852 return 0; 1853 1854 /* raid6_*_n with Q-Syndrome N -> raid5_* */ 1855 if (mddev->new_level == 5 && 1856 ((mddev->layout == ALGORITHM_PARITY_N && mddev->new_layout == ALGORITHM_PARITY_N) || 1857 __within_range(mddev->new_layout, ALGORITHM_LEFT_ASYMMETRIC, ALGORITHM_RIGHT_SYMMETRIC))) 1858 return 0; 1859 break; 1860 1861 default: 1862 break; 1863 } 1864 1865 rs->ti->error = "takeover not possible"; 1866 return -EINVAL; 1867 } 1868 1869 /* True if @rs requested to be taken over */ 1870 static bool rs_takeover_requested(struct raid_set *rs) 1871 { 1872 return rs->md.new_level != rs->md.level; 1873 } 1874 1875 /* True if layout is set to reshape. */ 1876 static bool rs_is_layout_change(struct raid_set *rs, bool use_mddev) 1877 { 1878 return (use_mddev ? rs->md.delta_disks : rs->delta_disks) || 1879 rs->md.new_layout != rs->md.layout || 1880 rs->md.new_chunk_sectors != rs->md.chunk_sectors; 1881 } 1882 1883 /* True if @rs is requested to reshape by ctr */ 1884 static bool rs_reshape_requested(struct raid_set *rs) 1885 { 1886 bool change; 1887 struct mddev *mddev = &rs->md; 1888 1889 if (rs_takeover_requested(rs)) 1890 return false; 1891 1892 if (rs_is_raid0(rs)) 1893 return false; 1894 1895 change = rs_is_layout_change(rs, false); 1896 1897 /* Historical case to support raid1 reshape without delta disks */ 1898 if (rs_is_raid1(rs)) { 1899 if (rs->delta_disks) 1900 return !!rs->delta_disks; 1901 1902 return !change && 1903 mddev->raid_disks != rs->raid_disks; 1904 } 1905 1906 if (rs_is_raid10(rs)) 1907 return change && 1908 !__is_raid10_far(mddev->new_layout) && 1909 rs->delta_disks >= 0; 1910 1911 return change; 1912 } 1913 1914 /* Features */ 1915 #define FEATURE_FLAG_SUPPORTS_V190 0x1 /* Supports extended superblock */ 1916 1917 /* State flags for sb->flags */ 1918 #define SB_FLAG_RESHAPE_ACTIVE 0x1 1919 #define SB_FLAG_RESHAPE_BACKWARDS 0x2 1920 1921 /* 1922 * This structure is never routinely used by userspace, unlike md superblocks. 1923 * Devices with this superblock should only ever be accessed via device-mapper. 1924 */ 1925 #define DM_RAID_MAGIC 0x64526D44 1926 struct dm_raid_superblock { 1927 __le32 magic; /* "DmRd" */ 1928 __le32 compat_features; /* Used to indicate compatible features (like 1.9.0 ondisk metadata extension) */ 1929 1930 __le32 num_devices; /* Number of devices in this raid set. (Max 64) */ 1931 __le32 array_position; /* The position of this drive in the raid set */ 1932 1933 __le64 events; /* Incremented by md when superblock updated */ 1934 __le64 failed_devices; /* Pre 1.9.0 part of bit field of devices to */ 1935 /* indicate failures (see extension below) */ 1936 1937 /* 1938 * This offset tracks the progress of the repair or replacement of 1939 * an individual drive. 1940 */ 1941 __le64 disk_recovery_offset; 1942 1943 /* 1944 * This offset tracks the progress of the initial raid set 1945 * synchronisation/parity calculation. 1946 */ 1947 __le64 array_resync_offset; 1948 1949 /* 1950 * raid characteristics 1951 */ 1952 __le32 level; 1953 __le32 layout; 1954 __le32 stripe_sectors; 1955 1956 /******************************************************************** 1957 * BELOW FOLLOW V1.9.0 EXTENSIONS TO THE PRISTINE SUPERBLOCK FORMAT!!! 1958 * 1959 * FEATURE_FLAG_SUPPORTS_V190 in the compat_features member indicates that those exist 1960 */ 1961 1962 __le32 flags; /* Flags defining array states for reshaping */ 1963 1964 /* 1965 * This offset tracks the progress of a raid 1966 * set reshape in order to be able to restart it 1967 */ 1968 __le64 reshape_position; 1969 1970 /* 1971 * These define the properties of the array in case of an interrupted reshape 1972 */ 1973 __le32 new_level; 1974 __le32 new_layout; 1975 __le32 new_stripe_sectors; 1976 __le32 delta_disks; 1977 1978 __le64 array_sectors; /* Array size in sectors */ 1979 1980 /* 1981 * Sector offsets to data on devices (reshaping). 1982 * Needed to support out of place reshaping, thus 1983 * not writing over any stripes whilst converting 1984 * them from old to new layout 1985 */ 1986 __le64 data_offset; 1987 __le64 new_data_offset; 1988 1989 __le64 sectors; /* Used device size in sectors */ 1990 1991 /* 1992 * Additional Bit field of devices indicating failures to support 1993 * up to 256 devices with the 1.9.0 on-disk metadata format 1994 */ 1995 __le64 extended_failed_devices[DISKS_ARRAY_ELEMS - 1]; 1996 1997 __le32 incompat_features; /* Used to indicate any incompatible features */ 1998 1999 /* Always set rest up to logical block size to 0 when writing (see get_metadata_device() below). */ 2000 } __packed; 2001 2002 /* 2003 * Check for reshape constraints on raid set @rs: 2004 * 2005 * - reshape function non-existent 2006 * - degraded set 2007 * - ongoing recovery 2008 * - ongoing reshape 2009 * 2010 * Returns 0 if none or -EPERM if given constraint 2011 * and error message reference in @errmsg 2012 */ 2013 static int rs_check_reshape(struct raid_set *rs) 2014 { 2015 struct mddev *mddev = &rs->md; 2016 2017 if (!mddev->pers || !mddev->pers->check_reshape) 2018 rs->ti->error = "Reshape not supported"; 2019 else if (mddev->degraded) 2020 rs->ti->error = "Can't reshape degraded raid set"; 2021 else if (rs_is_recovering(rs)) 2022 rs->ti->error = "Convert request on recovering raid set prohibited"; 2023 else if (rs_is_reshaping(rs)) 2024 rs->ti->error = "raid set already reshaping!"; 2025 else if (!(rs_is_raid1(rs) || rs_is_raid10(rs) || rs_is_raid456(rs))) 2026 rs->ti->error = "Reshaping only supported for raid1/4/5/6/10"; 2027 else 2028 return 0; 2029 2030 return -EPERM; 2031 } 2032 2033 static int read_disk_sb(struct md_rdev *rdev, int size, bool force_reload) 2034 { 2035 BUG_ON(!rdev->sb_page); 2036 2037 if (rdev->sb_loaded && !force_reload) 2038 return 0; 2039 2040 rdev->sb_loaded = 0; 2041 2042 if (!sync_page_io(rdev, 0, size, rdev->sb_page, REQ_OP_READ, true)) { 2043 DMERR("Failed to read superblock of device at position %d", 2044 rdev->raid_disk); 2045 md_error(rdev->mddev, rdev); 2046 set_bit(Faulty, &rdev->flags); 2047 return -EIO; 2048 } 2049 2050 rdev->sb_loaded = 1; 2051 2052 return 0; 2053 } 2054 2055 static void sb_retrieve_failed_devices(struct dm_raid_superblock *sb, uint64_t *failed_devices) 2056 { 2057 failed_devices[0] = le64_to_cpu(sb->failed_devices); 2058 memset(failed_devices + 1, 0, sizeof(sb->extended_failed_devices)); 2059 2060 if (le32_to_cpu(sb->compat_features) & FEATURE_FLAG_SUPPORTS_V190) { 2061 int i = ARRAY_SIZE(sb->extended_failed_devices); 2062 2063 while (i--) 2064 failed_devices[i+1] = le64_to_cpu(sb->extended_failed_devices[i]); 2065 } 2066 } 2067 2068 static void sb_update_failed_devices(struct dm_raid_superblock *sb, uint64_t *failed_devices) 2069 { 2070 int i = ARRAY_SIZE(sb->extended_failed_devices); 2071 2072 sb->failed_devices = cpu_to_le64(failed_devices[0]); 2073 while (i--) 2074 sb->extended_failed_devices[i] = cpu_to_le64(failed_devices[i+1]); 2075 } 2076 2077 /* 2078 * Synchronize the superblock members with the raid set properties 2079 * 2080 * All superblock data is little endian. 2081 */ 2082 static void super_sync(struct mddev *mddev, struct md_rdev *rdev) 2083 { 2084 bool update_failed_devices = false; 2085 unsigned int i; 2086 uint64_t failed_devices[DISKS_ARRAY_ELEMS]; 2087 struct dm_raid_superblock *sb; 2088 struct raid_set *rs = container_of(mddev, struct raid_set, md); 2089 2090 /* No metadata device, no superblock */ 2091 if (!rdev->meta_bdev) 2092 return; 2093 2094 BUG_ON(!rdev->sb_page); 2095 2096 sb = page_address(rdev->sb_page); 2097 2098 sb_retrieve_failed_devices(sb, failed_devices); 2099 2100 for (i = 0; i < rs->raid_disks; i++) 2101 if (!rs->dev[i].data_dev || test_bit(Faulty, &rs->dev[i].rdev.flags)) { 2102 update_failed_devices = true; 2103 set_bit(i, (void *) failed_devices); 2104 } 2105 2106 if (update_failed_devices) 2107 sb_update_failed_devices(sb, failed_devices); 2108 2109 sb->magic = cpu_to_le32(DM_RAID_MAGIC); 2110 sb->compat_features = cpu_to_le32(FEATURE_FLAG_SUPPORTS_V190); 2111 2112 sb->num_devices = cpu_to_le32(mddev->raid_disks); 2113 sb->array_position = cpu_to_le32(rdev->raid_disk); 2114 2115 sb->events = cpu_to_le64(mddev->events); 2116 2117 sb->disk_recovery_offset = cpu_to_le64(rdev->recovery_offset); 2118 sb->array_resync_offset = cpu_to_le64(mddev->recovery_cp); 2119 2120 sb->level = cpu_to_le32(mddev->level); 2121 sb->layout = cpu_to_le32(mddev->layout); 2122 sb->stripe_sectors = cpu_to_le32(mddev->chunk_sectors); 2123 2124 /******************************************************************** 2125 * BELOW FOLLOW V1.9.0 EXTENSIONS TO THE PRISTINE SUPERBLOCK FORMAT!!! 2126 * 2127 * FEATURE_FLAG_SUPPORTS_V190 in the compat_features member indicates that those exist 2128 */ 2129 sb->new_level = cpu_to_le32(mddev->new_level); 2130 sb->new_layout = cpu_to_le32(mddev->new_layout); 2131 sb->new_stripe_sectors = cpu_to_le32(mddev->new_chunk_sectors); 2132 2133 sb->delta_disks = cpu_to_le32(mddev->delta_disks); 2134 2135 smp_rmb(); /* Make sure we access most recent reshape position */ 2136 sb->reshape_position = cpu_to_le64(mddev->reshape_position); 2137 if (le64_to_cpu(sb->reshape_position) != MaxSector) { 2138 /* Flag ongoing reshape */ 2139 sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_ACTIVE); 2140 2141 if (mddev->delta_disks < 0 || mddev->reshape_backwards) 2142 sb->flags |= cpu_to_le32(SB_FLAG_RESHAPE_BACKWARDS); 2143 } else { 2144 /* Clear reshape flags */ 2145 sb->flags &= ~(cpu_to_le32(SB_FLAG_RESHAPE_ACTIVE|SB_FLAG_RESHAPE_BACKWARDS)); 2146 } 2147 2148 sb->array_sectors = cpu_to_le64(mddev->array_sectors); 2149 sb->data_offset = cpu_to_le64(rdev->data_offset); 2150 sb->new_data_offset = cpu_to_le64(rdev->new_data_offset); 2151 sb->sectors = cpu_to_le64(rdev->sectors); 2152 sb->incompat_features = cpu_to_le32(0); 2153 2154 /* Zero out the rest of the payload after the size of the superblock */ 2155 memset(sb + 1, 0, rdev->sb_size - sizeof(*sb)); 2156 } 2157 2158 /* 2159 * super_load 2160 * 2161 * This function creates a superblock if one is not found on the device 2162 * and will decide which superblock to use if there's a choice. 2163 * 2164 * Return: 1 if use rdev, 0 if use refdev, -Exxx otherwise 2165 */ 2166 static int super_load(struct md_rdev *rdev, struct md_rdev *refdev) 2167 { 2168 int r; 2169 struct dm_raid_superblock *sb; 2170 struct dm_raid_superblock *refsb; 2171 uint64_t events_sb, events_refsb; 2172 2173 r = read_disk_sb(rdev, rdev->sb_size, false); 2174 if (r) 2175 return r; 2176 2177 sb = page_address(rdev->sb_page); 2178 2179 /* 2180 * Two cases that we want to write new superblocks and rebuild: 2181 * 1) New device (no matching magic number) 2182 * 2) Device specified for rebuild (!In_sync w/ offset == 0) 2183 */ 2184 if ((sb->magic != cpu_to_le32(DM_RAID_MAGIC)) || 2185 (!test_bit(In_sync, &rdev->flags) && !rdev->recovery_offset)) { 2186 super_sync(rdev->mddev, rdev); 2187 2188 set_bit(FirstUse, &rdev->flags); 2189 sb->compat_features = cpu_to_le32(FEATURE_FLAG_SUPPORTS_V190); 2190 2191 /* Force writing of superblocks to disk */ 2192 set_bit(MD_SB_CHANGE_DEVS, &rdev->mddev->sb_flags); 2193 2194 /* Any superblock is better than none, choose that if given */ 2195 return refdev ? 0 : 1; 2196 } 2197 2198 if (!refdev) 2199 return 1; 2200 2201 events_sb = le64_to_cpu(sb->events); 2202 2203 refsb = page_address(refdev->sb_page); 2204 events_refsb = le64_to_cpu(refsb->events); 2205 2206 return (events_sb > events_refsb) ? 1 : 0; 2207 } 2208 2209 static int super_init_validation(struct raid_set *rs, struct md_rdev *rdev) 2210 { 2211 int role; 2212 struct mddev *mddev = &rs->md; 2213 uint64_t events_sb; 2214 uint64_t failed_devices[DISKS_ARRAY_ELEMS]; 2215 struct dm_raid_superblock *sb; 2216 uint32_t new_devs = 0, rebuild_and_new = 0, rebuilds = 0; 2217 struct md_rdev *r; 2218 struct dm_raid_superblock *sb2; 2219 2220 sb = page_address(rdev->sb_page); 2221 events_sb = le64_to_cpu(sb->events); 2222 2223 /* 2224 * Initialise to 1 if this is a new superblock. 2225 */ 2226 mddev->events = events_sb ? : 1; 2227 2228 mddev->reshape_position = MaxSector; 2229 2230 mddev->raid_disks = le32_to_cpu(sb->num_devices); 2231 mddev->level = le32_to_cpu(sb->level); 2232 mddev->layout = le32_to_cpu(sb->layout); 2233 mddev->chunk_sectors = le32_to_cpu(sb->stripe_sectors); 2234 2235 /* 2236 * Reshaping is supported, e.g. reshape_position is valid 2237 * in superblock and superblock content is authoritative. 2238 */ 2239 if (le32_to_cpu(sb->compat_features) & FEATURE_FLAG_SUPPORTS_V190) { 2240 /* Superblock is authoritative wrt given raid set layout! */ 2241 mddev->new_level = le32_to_cpu(sb->new_level); 2242 mddev->new_layout = le32_to_cpu(sb->new_layout); 2243 mddev->new_chunk_sectors = le32_to_cpu(sb->new_stripe_sectors); 2244 mddev->delta_disks = le32_to_cpu(sb->delta_disks); 2245 mddev->array_sectors = le64_to_cpu(sb->array_sectors); 2246 2247 /* raid was reshaping and got interrupted */ 2248 if (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_ACTIVE) { 2249 if (test_bit(__CTR_FLAG_DELTA_DISKS, &rs->ctr_flags)) { 2250 DMERR("Reshape requested but raid set is still reshaping"); 2251 return -EINVAL; 2252 } 2253 2254 if (mddev->delta_disks < 0 || 2255 (!mddev->delta_disks && (le32_to_cpu(sb->flags) & SB_FLAG_RESHAPE_BACKWARDS))) 2256 mddev->reshape_backwards = 1; 2257 else 2258 mddev->reshape_backwards = 0; 2259 2260 mddev->reshape_position = le64_to_cpu(sb->reshape_position); 2261 rs->raid_type = get_raid_type_by_ll(mddev->level, mddev->layout); 2262 } 2263 2264 } else { 2265 /* 2266 * No takeover/reshaping, because we don't have the extended v1.9.0 metadata 2267 */ 2268 struct raid_type *rt_cur = get_raid_type_by_ll(mddev->level, mddev->layout); 2269 struct raid_type *rt_new = get_raid_type_by_ll(mddev->new_level, mddev->new_layout); 2270 2271 if (rs_takeover_requested(rs)) { 2272 if (rt_cur && rt_new) 2273 DMERR("Takeover raid sets from %s to %s not yet supported by metadata. (raid level change)", 2274 rt_cur->name, rt_new->name); 2275 else 2276 DMERR("Takeover raid sets not yet supported by metadata. (raid level change)"); 2277 return -EINVAL; 2278 } else if (rs_reshape_requested(rs)) { 2279 DMERR("Reshaping raid sets not yet supported by metadata. (raid layout change keeping level)"); 2280 if (mddev->layout != mddev->new_layout) { 2281 if (rt_cur && rt_new) 2282 DMERR(" current layout %s vs new layout %s", 2283 rt_cur->name, rt_new->name); 2284 else 2285 DMERR(" current layout 0x%X vs new layout 0x%X", 2286 le32_to_cpu(sb->layout), mddev->new_layout); 2287 } 2288 if (mddev->chunk_sectors != mddev->new_chunk_sectors) 2289 DMERR(" current stripe sectors %u vs new stripe sectors %u", 2290 mddev->chunk_sectors, mddev->new_chunk_sectors); 2291 if (rs->delta_disks) 2292 DMERR(" current %u disks vs new %u disks", 2293 mddev->raid_disks, mddev->raid_disks + rs->delta_disks); 2294 if (rs_is_raid10(rs)) { 2295 DMERR(" Old layout: %s w/ %u copies", 2296 raid10_md_layout_to_format(mddev->layout), 2297 raid10_md_layout_to_copies(mddev->layout)); 2298 DMERR(" New layout: %s w/ %u copies", 2299 raid10_md_layout_to_format(mddev->new_layout), 2300 raid10_md_layout_to_copies(mddev->new_layout)); 2301 } 2302 return -EINVAL; 2303 } 2304 2305 DMINFO("Discovered old metadata format; upgrading to extended metadata format"); 2306 } 2307 2308 if (!test_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags)) 2309 mddev->recovery_cp = le64_to_cpu(sb->array_resync_offset); 2310 2311 /* 2312 * During load, we set FirstUse if a new superblock was written. 2313 * There are two reasons we might not have a superblock: 2314 * 1) The raid set is brand new - in which case, all of the 2315 * devices must have their In_sync bit set. Also, 2316 * recovery_cp must be 0, unless forced. 2317 * 2) This is a new device being added to an old raid set 2318 * and the new device needs to be rebuilt - in which 2319 * case the In_sync bit will /not/ be set and 2320 * recovery_cp must be MaxSector. 2321 * 3) This is/are a new device(s) being added to an old 2322 * raid set during takeover to a higher raid level 2323 * to provide capacity for redundancy or during reshape 2324 * to add capacity to grow the raid set. 2325 */ 2326 rdev_for_each(r, mddev) { 2327 if (test_bit(Journal, &rdev->flags)) 2328 continue; 2329 2330 if (test_bit(FirstUse, &r->flags)) 2331 new_devs++; 2332 2333 if (!test_bit(In_sync, &r->flags)) { 2334 DMINFO("Device %d specified for rebuild; clearing superblock", 2335 r->raid_disk); 2336 rebuilds++; 2337 2338 if (test_bit(FirstUse, &r->flags)) 2339 rebuild_and_new++; 2340 } 2341 } 2342 2343 if (new_devs == rs->raid_disks || !rebuilds) { 2344 /* Replace a broken device */ 2345 if (new_devs == rs->raid_disks) { 2346 DMINFO("Superblocks created for new raid set"); 2347 set_bit(MD_ARRAY_FIRST_USE, &mddev->flags); 2348 } else if (new_devs != rebuilds && 2349 new_devs != rs->delta_disks) { 2350 DMERR("New device injected into existing raid set without " 2351 "'delta_disks' or 'rebuild' parameter specified"); 2352 return -EINVAL; 2353 } 2354 } else if (new_devs && new_devs != rebuilds) { 2355 DMERR("%u 'rebuild' devices cannot be injected into" 2356 " a raid set with %u other first-time devices", 2357 rebuilds, new_devs); 2358 return -EINVAL; 2359 } else if (rebuilds) { 2360 if (rebuild_and_new && rebuilds != rebuild_and_new) { 2361 DMERR("new device%s provided without 'rebuild'", 2362 new_devs > 1 ? "s" : ""); 2363 return -EINVAL; 2364 } else if (!test_bit(__CTR_FLAG_REBUILD, &rs->ctr_flags) && rs_is_recovering(rs)) { 2365 DMERR("'rebuild' specified while raid set is not in-sync (recovery_cp=%llu)", 2366 (unsigned long long) mddev->recovery_cp); 2367 return -EINVAL; 2368 } else if (rs_is_reshaping(rs)) { 2369 DMERR("'rebuild' specified while raid set is being reshaped (reshape_position=%llu)", 2370 (unsigned long long) mddev->reshape_position); 2371 return -EINVAL; 2372 } 2373 } 2374 2375 /* 2376 * Now we set the Faulty bit for those devices that are 2377 * recorded in the superblock as failed. 2378 */ 2379 sb_retrieve_failed_devices(sb, failed_devices); 2380 rdev_for_each(r, mddev) { 2381 if (test_bit(Journal, &rdev->flags) || 2382 !r->sb_page) 2383 continue; 2384 sb2 = page_address(r->sb_page); 2385 sb2->failed_devices = 0; 2386 memset(sb2->extended_failed_devices, 0, sizeof(sb2->extended_failed_devices)); 2387 2388 /* 2389 * Check for any device re-ordering. 2390 */ 2391 if (!test_bit(FirstUse, &r->flags) && (r->raid_disk >= 0)) { 2392 role = le32_to_cpu(sb2->array_position); 2393 if (role < 0) 2394 continue; 2395 2396 if (role != r->raid_disk) { 2397 if (rs_is_raid10(rs) && __is_raid10_near(mddev->layout)) { 2398 if (mddev->raid_disks % __raid10_near_copies(mddev->layout) || 2399 rs->raid_disks % rs->raid10_copies) { 2400 rs->ti->error = 2401 "Cannot change raid10 near set to odd # of devices!"; 2402 return -EINVAL; 2403 } 2404 2405 sb2->array_position = cpu_to_le32(r->raid_disk); 2406 2407 } else if (!(rs_is_raid10(rs) && rt_is_raid0(rs->raid_type)) && 2408 !(rs_is_raid0(rs) && rt_is_raid10(rs->raid_type)) && 2409 !rt_is_raid1(rs->raid_type)) { 2410 rs->ti->error = "Cannot change device positions in raid set"; 2411 return -EINVAL; 2412 } 2413 2414 DMINFO("raid device #%d now at position #%d", role, r->raid_disk); 2415 } 2416 2417 /* 2418 * Partial recovery is performed on 2419 * returning failed devices. 2420 */ 2421 if (test_bit(role, (void *) failed_devices)) 2422 set_bit(Faulty, &r->flags); 2423 } 2424 } 2425 2426 return 0; 2427 } 2428 2429 static int super_validate(struct raid_set *rs, struct md_rdev *rdev) 2430 { 2431 struct mddev *mddev = &rs->md; 2432 struct dm_raid_superblock *sb; 2433 2434 if (rs_is_raid0(rs) || !rdev->sb_page || rdev->raid_disk < 0) 2435 return 0; 2436 2437 sb = page_address(rdev->sb_page); 2438 2439 /* 2440 * If mddev->events is not set, we know we have not yet initialized 2441 * the array. 2442 */ 2443 if (!mddev->events && super_init_validation(rs, rdev)) 2444 return -EINVAL; 2445 2446 if (le32_to_cpu(sb->compat_features) && 2447 le32_to_cpu(sb->compat_features) != FEATURE_FLAG_SUPPORTS_V190) { 2448 rs->ti->error = "Unable to assemble array: Unknown flag(s) in compatible feature flags"; 2449 return -EINVAL; 2450 } 2451 2452 if (sb->incompat_features) { 2453 rs->ti->error = "Unable to assemble array: No incompatible feature flags supported yet"; 2454 return -EINVAL; 2455 } 2456 2457 /* Enable bitmap creation on @rs unless no metadevs or raid0 or journaled raid4/5/6 set. */ 2458 mddev->bitmap_info.offset = (rt_is_raid0(rs->raid_type) || rs->journal_dev.dev) ? 0 : to_sector(4096); 2459 mddev->bitmap_info.default_offset = mddev->bitmap_info.offset; 2460 2461 if (!test_and_clear_bit(FirstUse, &rdev->flags)) { 2462 /* 2463 * Retrieve rdev size stored in superblock to be prepared for shrink. 2464 * Check extended superblock members are present otherwise the size 2465 * will not be set! 2466 */ 2467 if (le32_to_cpu(sb->compat_features) & FEATURE_FLAG_SUPPORTS_V190) 2468 rdev->sectors = le64_to_cpu(sb->sectors); 2469 2470 rdev->recovery_offset = le64_to_cpu(sb->disk_recovery_offset); 2471 if (rdev->recovery_offset == MaxSector) 2472 set_bit(In_sync, &rdev->flags); 2473 /* 2474 * If no reshape in progress -> we're recovering single 2475 * disk(s) and have to set the device(s) to out-of-sync 2476 */ 2477 else if (!rs_is_reshaping(rs)) 2478 clear_bit(In_sync, &rdev->flags); /* Mandatory for recovery */ 2479 } 2480 2481 /* 2482 * If a device comes back, set it as not In_sync and no longer faulty. 2483 */ 2484 if (test_and_clear_bit(Faulty, &rdev->flags)) { 2485 rdev->recovery_offset = 0; 2486 clear_bit(In_sync, &rdev->flags); 2487 rdev->saved_raid_disk = rdev->raid_disk; 2488 } 2489 2490 /* Reshape support -> restore repective data offsets */ 2491 rdev->data_offset = le64_to_cpu(sb->data_offset); 2492 rdev->new_data_offset = le64_to_cpu(sb->new_data_offset); 2493 2494 return 0; 2495 } 2496 2497 /* 2498 * Analyse superblocks and select the freshest. 2499 */ 2500 static int analyse_superblocks(struct dm_target *ti, struct raid_set *rs) 2501 { 2502 int r; 2503 struct md_rdev *rdev, *freshest; 2504 struct mddev *mddev = &rs->md; 2505 2506 freshest = NULL; 2507 rdev_for_each(rdev, mddev) { 2508 if (test_bit(Journal, &rdev->flags)) 2509 continue; 2510 2511 if (!rdev->meta_bdev) 2512 continue; 2513 2514 /* Set superblock offset/size for metadata device. */ 2515 rdev->sb_start = 0; 2516 rdev->sb_size = bdev_logical_block_size(rdev->meta_bdev); 2517 if (rdev->sb_size < sizeof(struct dm_raid_superblock) || rdev->sb_size > PAGE_SIZE) { 2518 DMERR("superblock size of a logical block is no longer valid"); 2519 return -EINVAL; 2520 } 2521 2522 /* 2523 * Skipping super_load due to CTR_FLAG_SYNC will cause 2524 * the array to undergo initialization again as 2525 * though it were new. This is the intended effect 2526 * of the "sync" directive. 2527 * 2528 * With reshaping capability added, we must ensure that 2529 * the "sync" directive is disallowed during the reshape. 2530 */ 2531 if (test_bit(__CTR_FLAG_SYNC, &rs->ctr_flags)) 2532 continue; 2533 2534 r = super_load(rdev, freshest); 2535 2536 switch (r) { 2537 case 1: 2538 freshest = rdev; 2539 break; 2540 case 0: 2541 break; 2542 default: 2543 /* This is a failure to read the superblock from the metadata device. */ 2544 /* 2545 * We have to keep any raid0 data/metadata device pairs or 2546 * the MD raid0 personality will fail to start the array. 2547 */ 2548 if (rs_is_raid0(rs)) 2549 continue; 2550 2551 /* 2552 * We keep the dm_devs to be able to emit the device tuple 2553 * properly on the table line in raid_status() (rather than 2554 * mistakenly acting as if '- -' got passed into the constructor). 2555 * 2556 * The rdev has to stay on the same_set list to allow for 2557 * the attempt to restore faulty devices on second resume. 2558 */ 2559 rdev->raid_disk = rdev->saved_raid_disk = -1; 2560 break; 2561 } 2562 } 2563 2564 if (!freshest) 2565 return 0; 2566 2567 /* 2568 * Validation of the freshest device provides the source of 2569 * validation for the remaining devices. 2570 */ 2571 rs->ti->error = "Unable to assemble array: Invalid superblocks"; 2572 if (super_validate(rs, freshest)) 2573 return -EINVAL; 2574 2575 if (validate_raid_redundancy(rs)) { 2576 rs->ti->error = "Insufficient redundancy to activate array"; 2577 return -EINVAL; 2578 } 2579 2580 rdev_for_each(rdev, mddev) 2581 if (!test_bit(Journal, &rdev->flags) && 2582 rdev != freshest && 2583 super_validate(rs, rdev)) 2584 return -EINVAL; 2585 return 0; 2586 } 2587 2588 /* 2589 * Adjust data_offset and new_data_offset on all disk members of @rs 2590 * for out of place reshaping if requested by constructor 2591 * 2592 * We need free space at the beginning of each raid disk for forward 2593 * and at the end for backward reshapes which userspace has to provide 2594 * via remapping/reordering of space. 2595 */ 2596 static int rs_adjust_data_offsets(struct raid_set *rs) 2597 { 2598 sector_t data_offset = 0, new_data_offset = 0; 2599 struct md_rdev *rdev; 2600 2601 /* Constructor did not request data offset change */ 2602 if (!test_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags)) { 2603 if (!rs_is_reshapable(rs)) 2604 goto out; 2605 2606 return 0; 2607 } 2608 2609 /* HM FIXME: get In_Sync raid_dev? */ 2610 rdev = &rs->dev[0].rdev; 2611 2612 if (rs->delta_disks < 0) { 2613 /* 2614 * Removing disks (reshaping backwards): 2615 * 2616 * - before reshape: data is at offset 0 and free space 2617 * is at end of each component LV 2618 * 2619 * - after reshape: data is at offset rs->data_offset != 0 on each component LV 2620 */ 2621 data_offset = 0; 2622 new_data_offset = rs->data_offset; 2623 2624 } else if (rs->delta_disks > 0) { 2625 /* 2626 * Adding disks (reshaping forwards): 2627 * 2628 * - before reshape: data is at offset rs->data_offset != 0 and 2629 * free space is at begin of each component LV 2630 * 2631 * - after reshape: data is at offset 0 on each component LV 2632 */ 2633 data_offset = rs->data_offset; 2634 new_data_offset = 0; 2635 2636 } else { 2637 /* 2638 * User space passes in 0 for data offset after having removed reshape space 2639 * 2640 * - or - (data offset != 0) 2641 * 2642 * Changing RAID layout or chunk size -> toggle offsets 2643 * 2644 * - before reshape: data is at offset rs->data_offset 0 and 2645 * free space is at end of each component LV 2646 * -or- 2647 * data is at offset rs->data_offset != 0 and 2648 * free space is at begin of each component LV 2649 * 2650 * - after reshape: data is at offset 0 if it was at offset != 0 2651 * or at offset != 0 if it was at offset 0 2652 * on each component LV 2653 * 2654 */ 2655 data_offset = rs->data_offset ? rdev->data_offset : 0; 2656 new_data_offset = data_offset ? 0 : rs->data_offset; 2657 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 2658 } 2659 2660 /* 2661 * Make sure we got a minimum amount of free sectors per device 2662 */ 2663 if (rs->data_offset && 2664 bdev_nr_sectors(rdev->bdev) - rs->md.dev_sectors < MIN_FREE_RESHAPE_SPACE) { 2665 rs->ti->error = data_offset ? "No space for forward reshape" : 2666 "No space for backward reshape"; 2667 return -ENOSPC; 2668 } 2669 out: 2670 /* 2671 * Raise recovery_cp in case data_offset != 0 to 2672 * avoid false recovery positives in the constructor. 2673 */ 2674 if (rs->md.recovery_cp < rs->md.dev_sectors) 2675 rs->md.recovery_cp += rs->dev[0].rdev.data_offset; 2676 2677 /* Adjust data offsets on all rdevs but on any raid4/5/6 journal device */ 2678 rdev_for_each(rdev, &rs->md) { 2679 if (!test_bit(Journal, &rdev->flags)) { 2680 rdev->data_offset = data_offset; 2681 rdev->new_data_offset = new_data_offset; 2682 } 2683 } 2684 2685 return 0; 2686 } 2687 2688 /* Userpace reordered disks -> adjust raid_disk indexes in @rs */ 2689 static void __reorder_raid_disk_indexes(struct raid_set *rs) 2690 { 2691 int i = 0; 2692 struct md_rdev *rdev; 2693 2694 rdev_for_each(rdev, &rs->md) { 2695 if (!test_bit(Journal, &rdev->flags)) { 2696 rdev->raid_disk = i++; 2697 rdev->saved_raid_disk = rdev->new_raid_disk = -1; 2698 } 2699 } 2700 } 2701 2702 /* 2703 * Setup @rs for takeover by a different raid level 2704 */ 2705 static int rs_setup_takeover(struct raid_set *rs) 2706 { 2707 struct mddev *mddev = &rs->md; 2708 struct md_rdev *rdev; 2709 unsigned int d = mddev->raid_disks = rs->raid_disks; 2710 sector_t new_data_offset = rs->dev[0].rdev.data_offset ? 0 : rs->data_offset; 2711 2712 if (rt_is_raid10(rs->raid_type)) { 2713 if (rs_is_raid0(rs)) { 2714 /* Userpace reordered disks -> adjust raid_disk indexes */ 2715 __reorder_raid_disk_indexes(rs); 2716 2717 /* raid0 -> raid10_far layout */ 2718 mddev->layout = raid10_format_to_md_layout(rs, ALGORITHM_RAID10_FAR, 2719 rs->raid10_copies); 2720 } else if (rs_is_raid1(rs)) 2721 /* raid1 -> raid10_near layout */ 2722 mddev->layout = raid10_format_to_md_layout(rs, ALGORITHM_RAID10_NEAR, 2723 rs->raid_disks); 2724 else 2725 return -EINVAL; 2726 2727 } 2728 2729 clear_bit(MD_ARRAY_FIRST_USE, &mddev->flags); 2730 mddev->recovery_cp = MaxSector; 2731 2732 while (d--) { 2733 rdev = &rs->dev[d].rdev; 2734 2735 if (test_bit(d, (void *) rs->rebuild_disks)) { 2736 clear_bit(In_sync, &rdev->flags); 2737 clear_bit(Faulty, &rdev->flags); 2738 mddev->recovery_cp = rdev->recovery_offset = 0; 2739 /* Bitmap has to be created when we do an "up" takeover */ 2740 set_bit(MD_ARRAY_FIRST_USE, &mddev->flags); 2741 } 2742 2743 rdev->new_data_offset = new_data_offset; 2744 } 2745 2746 return 0; 2747 } 2748 2749 /* Prepare @rs for reshape */ 2750 static int rs_prepare_reshape(struct raid_set *rs) 2751 { 2752 bool reshape; 2753 struct mddev *mddev = &rs->md; 2754 2755 if (rs_is_raid10(rs)) { 2756 if (rs->raid_disks != mddev->raid_disks && 2757 __is_raid10_near(mddev->layout) && 2758 rs->raid10_copies && 2759 rs->raid10_copies != __raid10_near_copies(mddev->layout)) { 2760 /* 2761 * raid disk have to be multiple of data copies to allow this conversion, 2762 * 2763 * This is actually not a reshape it is a 2764 * rebuild of any additional mirrors per group 2765 */ 2766 if (rs->raid_disks % rs->raid10_copies) { 2767 rs->ti->error = "Can't reshape raid10 mirror groups"; 2768 return -EINVAL; 2769 } 2770 2771 /* Userpace reordered disks to add/remove mirrors -> adjust raid_disk indexes */ 2772 __reorder_raid_disk_indexes(rs); 2773 mddev->layout = raid10_format_to_md_layout(rs, ALGORITHM_RAID10_NEAR, 2774 rs->raid10_copies); 2775 mddev->new_layout = mddev->layout; 2776 reshape = false; 2777 } else 2778 reshape = true; 2779 2780 } else if (rs_is_raid456(rs)) 2781 reshape = true; 2782 2783 else if (rs_is_raid1(rs)) { 2784 if (rs->delta_disks) { 2785 /* Process raid1 via delta_disks */ 2786 mddev->degraded = rs->delta_disks < 0 ? -rs->delta_disks : rs->delta_disks; 2787 reshape = true; 2788 } else { 2789 /* Process raid1 without delta_disks */ 2790 mddev->raid_disks = rs->raid_disks; 2791 reshape = false; 2792 } 2793 } else { 2794 rs->ti->error = "Called with bogus raid type"; 2795 return -EINVAL; 2796 } 2797 2798 if (reshape) { 2799 set_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags); 2800 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 2801 } else if (mddev->raid_disks < rs->raid_disks) 2802 /* Create new superblocks and bitmaps, if any new disks */ 2803 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 2804 2805 return 0; 2806 } 2807 2808 /* Get reshape sectors from data_offsets or raid set */ 2809 static sector_t _get_reshape_sectors(struct raid_set *rs) 2810 { 2811 struct md_rdev *rdev; 2812 sector_t reshape_sectors = 0; 2813 2814 rdev_for_each(rdev, &rs->md) 2815 if (!test_bit(Journal, &rdev->flags)) { 2816 reshape_sectors = (rdev->data_offset > rdev->new_data_offset) ? 2817 rdev->data_offset - rdev->new_data_offset : 2818 rdev->new_data_offset - rdev->data_offset; 2819 break; 2820 } 2821 2822 return max(reshape_sectors, (sector_t) rs->data_offset); 2823 } 2824 2825 /* 2826 * Reshape: 2827 * - change raid layout 2828 * - change chunk size 2829 * - add disks 2830 * - remove disks 2831 */ 2832 static int rs_setup_reshape(struct raid_set *rs) 2833 { 2834 int r = 0; 2835 unsigned int cur_raid_devs, d; 2836 sector_t reshape_sectors = _get_reshape_sectors(rs); 2837 struct mddev *mddev = &rs->md; 2838 struct md_rdev *rdev; 2839 2840 mddev->delta_disks = rs->delta_disks; 2841 cur_raid_devs = mddev->raid_disks; 2842 2843 /* Ignore impossible layout change whilst adding/removing disks */ 2844 if (mddev->delta_disks && 2845 mddev->layout != mddev->new_layout) { 2846 DMINFO("Ignoring invalid layout change with delta_disks=%d", rs->delta_disks); 2847 mddev->new_layout = mddev->layout; 2848 } 2849 2850 /* 2851 * Adjust array size: 2852 * 2853 * - in case of adding disk(s), array size has 2854 * to grow after the disk adding reshape, 2855 * which'll happen in the event handler; 2856 * reshape will happen forward, so space has to 2857 * be available at the beginning of each disk 2858 * 2859 * - in case of removing disk(s), array size 2860 * has to shrink before starting the reshape, 2861 * which'll happen here; 2862 * reshape will happen backward, so space has to 2863 * be available at the end of each disk 2864 * 2865 * - data_offset and new_data_offset are 2866 * adjusted for aforementioned out of place 2867 * reshaping based on userspace passing in 2868 * the "data_offset <sectors>" key/value 2869 * pair via the constructor 2870 */ 2871 2872 /* Add disk(s) */ 2873 if (rs->delta_disks > 0) { 2874 /* Prepare disks for check in raid4/5/6/10 {check|start}_reshape */ 2875 for (d = cur_raid_devs; d < rs->raid_disks; d++) { 2876 rdev = &rs->dev[d].rdev; 2877 clear_bit(In_sync, &rdev->flags); 2878 2879 /* 2880 * save_raid_disk needs to be -1, or recovery_offset will be set to 0 2881 * by md, which'll store that erroneously in the superblock on reshape 2882 */ 2883 rdev->saved_raid_disk = -1; 2884 rdev->raid_disk = d; 2885 2886 rdev->sectors = mddev->dev_sectors; 2887 rdev->recovery_offset = rs_is_raid1(rs) ? 0 : MaxSector; 2888 } 2889 2890 mddev->reshape_backwards = 0; /* adding disk(s) -> forward reshape */ 2891 2892 /* Remove disk(s) */ 2893 } else if (rs->delta_disks < 0) { 2894 r = rs_set_dev_and_array_sectors(rs, rs->ti->len, true); 2895 mddev->reshape_backwards = 1; /* removing disk(s) -> backward reshape */ 2896 2897 /* Change layout and/or chunk size */ 2898 } else { 2899 /* 2900 * Reshape layout (e.g. raid5_ls -> raid5_n) and/or chunk size: 2901 * 2902 * keeping number of disks and do layout change -> 2903 * 2904 * toggle reshape_backward depending on data_offset: 2905 * 2906 * - free space upfront -> reshape forward 2907 * 2908 * - free space at the end -> reshape backward 2909 * 2910 * 2911 * This utilizes free reshape space avoiding the need 2912 * for userspace to move (parts of) LV segments in 2913 * case of layout/chunksize change (for disk 2914 * adding/removing reshape space has to be at 2915 * the proper address (see above with delta_disks): 2916 * 2917 * add disk(s) -> begin 2918 * remove disk(s)-> end 2919 */ 2920 mddev->reshape_backwards = rs->dev[0].rdev.data_offset ? 0 : 1; 2921 } 2922 2923 /* 2924 * Adjust device size for forward reshape 2925 * because md_finish_reshape() reduces it. 2926 */ 2927 if (!mddev->reshape_backwards) 2928 rdev_for_each(rdev, &rs->md) 2929 if (!test_bit(Journal, &rdev->flags)) 2930 rdev->sectors += reshape_sectors; 2931 2932 return r; 2933 } 2934 2935 /* 2936 * If the md resync thread has updated superblock with max reshape position 2937 * at the end of a reshape but not (yet) reset the layout configuration 2938 * changes -> reset the latter. 2939 */ 2940 static void rs_reset_inconclusive_reshape(struct raid_set *rs) 2941 { 2942 if (!rs_is_reshaping(rs) && rs_is_layout_change(rs, true)) { 2943 rs_set_cur(rs); 2944 rs->md.delta_disks = 0; 2945 rs->md.reshape_backwards = 0; 2946 } 2947 } 2948 2949 /* 2950 * Enable/disable discard support on RAID set depending on 2951 * RAID level and discard properties of underlying RAID members. 2952 */ 2953 static void configure_discard_support(struct raid_set *rs) 2954 { 2955 int i; 2956 bool raid456; 2957 struct dm_target *ti = rs->ti; 2958 2959 /* 2960 * XXX: RAID level 4,5,6 require zeroing for safety. 2961 */ 2962 raid456 = rs_is_raid456(rs); 2963 2964 for (i = 0; i < rs->raid_disks; i++) { 2965 if (!rs->dev[i].rdev.bdev || 2966 !bdev_max_discard_sectors(rs->dev[i].rdev.bdev)) 2967 return; 2968 2969 if (raid456) { 2970 if (!devices_handle_discard_safely) { 2971 DMERR("raid456 discard support disabled due to discard_zeroes_data uncertainty."); 2972 DMERR("Set dm-raid.devices_handle_discard_safely=Y to override."); 2973 return; 2974 } 2975 } 2976 } 2977 2978 ti->num_discard_bios = 1; 2979 } 2980 2981 /* 2982 * Construct a RAID0/1/10/4/5/6 mapping: 2983 * Args: 2984 * <raid_type> <#raid_params> <raid_params>{0,} \ 2985 * <#raid_devs> [<meta_dev1> <dev1>]{1,} 2986 * 2987 * <raid_params> varies by <raid_type>. See 'parse_raid_params' for 2988 * details on possible <raid_params>. 2989 * 2990 * Userspace is free to initialize the metadata devices, hence the superblocks to 2991 * enforce recreation based on the passed in table parameters. 2992 * 2993 */ 2994 static int raid_ctr(struct dm_target *ti, unsigned int argc, char **argv) 2995 { 2996 int r; 2997 bool resize = false; 2998 struct raid_type *rt; 2999 unsigned int num_raid_params, num_raid_devs; 3000 sector_t sb_array_sectors, rdev_sectors, reshape_sectors; 3001 struct raid_set *rs = NULL; 3002 const char *arg; 3003 struct rs_layout rs_layout; 3004 struct dm_arg_set as = { argc, argv }, as_nrd; 3005 struct dm_arg _args[] = { 3006 { 0, as.argc, "Cannot understand number of raid parameters" }, 3007 { 1, 254, "Cannot understand number of raid devices parameters" } 3008 }; 3009 3010 arg = dm_shift_arg(&as); 3011 if (!arg) { 3012 ti->error = "No arguments"; 3013 return -EINVAL; 3014 } 3015 3016 rt = get_raid_type(arg); 3017 if (!rt) { 3018 ti->error = "Unrecognised raid_type"; 3019 return -EINVAL; 3020 } 3021 3022 /* Must have <#raid_params> */ 3023 if (dm_read_arg_group(_args, &as, &num_raid_params, &ti->error)) 3024 return -EINVAL; 3025 3026 /* number of raid device tupples <meta_dev data_dev> */ 3027 as_nrd = as; 3028 dm_consume_args(&as_nrd, num_raid_params); 3029 _args[1].max = (as_nrd.argc - 1) / 2; 3030 if (dm_read_arg(_args + 1, &as_nrd, &num_raid_devs, &ti->error)) 3031 return -EINVAL; 3032 3033 if (!__within_range(num_raid_devs, 1, MAX_RAID_DEVICES)) { 3034 ti->error = "Invalid number of supplied raid devices"; 3035 return -EINVAL; 3036 } 3037 3038 rs = raid_set_alloc(ti, rt, num_raid_devs); 3039 if (IS_ERR(rs)) 3040 return PTR_ERR(rs); 3041 3042 r = parse_raid_params(rs, &as, num_raid_params); 3043 if (r) 3044 goto bad; 3045 3046 r = parse_dev_params(rs, &as); 3047 if (r) 3048 goto bad; 3049 3050 rs->md.sync_super = super_sync; 3051 3052 /* 3053 * Calculate ctr requested array and device sizes to allow 3054 * for superblock analysis needing device sizes defined. 3055 * 3056 * Any existing superblock will overwrite the array and device sizes 3057 */ 3058 r = rs_set_dev_and_array_sectors(rs, rs->ti->len, false); 3059 if (r) 3060 goto bad; 3061 3062 /* Memorize just calculated, potentially larger sizes to grow the raid set in preresume */ 3063 rs->array_sectors = rs->md.array_sectors; 3064 rs->dev_sectors = rs->md.dev_sectors; 3065 3066 /* 3067 * Backup any new raid set level, layout, ... 3068 * requested to be able to compare to superblock 3069 * members for conversion decisions. 3070 */ 3071 rs_config_backup(rs, &rs_layout); 3072 3073 r = analyse_superblocks(ti, rs); 3074 if (r) 3075 goto bad; 3076 3077 /* All in-core metadata now as of current superblocks after calling analyse_superblocks() */ 3078 sb_array_sectors = rs->md.array_sectors; 3079 rdev_sectors = __rdev_sectors(rs); 3080 if (!rdev_sectors) { 3081 ti->error = "Invalid rdev size"; 3082 r = -EINVAL; 3083 goto bad; 3084 } 3085 3086 3087 reshape_sectors = _get_reshape_sectors(rs); 3088 if (rs->dev_sectors != rdev_sectors) { 3089 resize = (rs->dev_sectors != rdev_sectors - reshape_sectors); 3090 if (rs->dev_sectors > rdev_sectors - reshape_sectors) 3091 set_bit(RT_FLAG_RS_GROW, &rs->runtime_flags); 3092 } 3093 3094 INIT_WORK(&rs->md.event_work, do_table_event); 3095 ti->private = rs; 3096 ti->num_flush_bios = 1; 3097 ti->needs_bio_set_dev = true; 3098 3099 /* Restore any requested new layout for conversion decision */ 3100 rs_config_restore(rs, &rs_layout); 3101 3102 /* 3103 * Now that we have any superblock metadata available, 3104 * check for new, recovering, reshaping, to be taken over, 3105 * to be reshaped or an existing, unchanged raid set to 3106 * run in sequence. 3107 */ 3108 if (test_bit(MD_ARRAY_FIRST_USE, &rs->md.flags)) { 3109 /* A new raid6 set has to be recovered to ensure proper parity and Q-Syndrome */ 3110 if (rs_is_raid6(rs) && 3111 test_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags)) { 3112 ti->error = "'nosync' not allowed for new raid6 set"; 3113 r = -EINVAL; 3114 goto bad; 3115 } 3116 rs_setup_recovery(rs, 0); 3117 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 3118 rs_set_new(rs); 3119 } else if (rs_is_recovering(rs)) { 3120 /* A recovering raid set may be resized */ 3121 goto size_check; 3122 } else if (rs_is_reshaping(rs)) { 3123 /* Have to reject size change request during reshape */ 3124 if (resize) { 3125 ti->error = "Can't resize a reshaping raid set"; 3126 r = -EPERM; 3127 goto bad; 3128 } 3129 /* skip setup rs */ 3130 } else if (rs_takeover_requested(rs)) { 3131 if (rs_is_reshaping(rs)) { 3132 ti->error = "Can't takeover a reshaping raid set"; 3133 r = -EPERM; 3134 goto bad; 3135 } 3136 3137 /* We can't takeover a journaled raid4/5/6 */ 3138 if (test_bit(__CTR_FLAG_JOURNAL_DEV, &rs->ctr_flags)) { 3139 ti->error = "Can't takeover a journaled raid4/5/6 set"; 3140 r = -EPERM; 3141 goto bad; 3142 } 3143 3144 /* 3145 * If a takeover is needed, userspace sets any additional 3146 * devices to rebuild and we can check for a valid request here. 3147 * 3148 * If acceptable, set the level to the new requested 3149 * one, prohibit requesting recovery, allow the raid 3150 * set to run and store superblocks during resume. 3151 */ 3152 r = rs_check_takeover(rs); 3153 if (r) 3154 goto bad; 3155 3156 r = rs_setup_takeover(rs); 3157 if (r) 3158 goto bad; 3159 3160 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 3161 /* Takeover ain't recovery, so disable recovery */ 3162 rs_setup_recovery(rs, MaxSector); 3163 rs_set_new(rs); 3164 } else if (rs_reshape_requested(rs)) { 3165 /* Only request grow on raid set size extensions, not on reshapes. */ 3166 clear_bit(RT_FLAG_RS_GROW, &rs->runtime_flags); 3167 3168 /* 3169 * No need to check for 'ongoing' takeover here, because takeover 3170 * is an instant operation as oposed to an ongoing reshape. 3171 */ 3172 3173 /* We can't reshape a journaled raid4/5/6 */ 3174 if (test_bit(__CTR_FLAG_JOURNAL_DEV, &rs->ctr_flags)) { 3175 ti->error = "Can't reshape a journaled raid4/5/6 set"; 3176 r = -EPERM; 3177 goto bad; 3178 } 3179 3180 /* Out-of-place space has to be available to allow for a reshape unless raid1! */ 3181 if (reshape_sectors || rs_is_raid1(rs)) { 3182 /* 3183 * We can only prepare for a reshape here, because the 3184 * raid set needs to run to provide the repective reshape 3185 * check functions via its MD personality instance. 3186 * 3187 * So do the reshape check after md_run() succeeded. 3188 */ 3189 r = rs_prepare_reshape(rs); 3190 if (r) 3191 goto bad; 3192 3193 /* Reshaping ain't recovery, so disable recovery */ 3194 rs_setup_recovery(rs, MaxSector); 3195 } 3196 rs_set_cur(rs); 3197 } else { 3198 size_check: 3199 /* May not set recovery when a device rebuild is requested */ 3200 if (test_bit(__CTR_FLAG_REBUILD, &rs->ctr_flags)) { 3201 clear_bit(RT_FLAG_RS_GROW, &rs->runtime_flags); 3202 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 3203 rs_setup_recovery(rs, MaxSector); 3204 } else if (test_bit(RT_FLAG_RS_GROW, &rs->runtime_flags)) { 3205 /* 3206 * Set raid set to current size, i.e. size as of 3207 * superblocks to grow to larger size in preresume. 3208 */ 3209 r = rs_set_dev_and_array_sectors(rs, sb_array_sectors, false); 3210 if (r) 3211 goto bad; 3212 3213 rs_setup_recovery(rs, rs->md.recovery_cp < rs->md.dev_sectors ? rs->md.recovery_cp : rs->md.dev_sectors); 3214 } else { 3215 /* This is no size change or it is shrinking, update size and record in superblocks */ 3216 r = rs_set_dev_and_array_sectors(rs, rs->ti->len, false); 3217 if (r) 3218 goto bad; 3219 3220 if (sb_array_sectors > rs->array_sectors) 3221 set_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags); 3222 } 3223 rs_set_cur(rs); 3224 } 3225 3226 /* If constructor requested it, change data and new_data offsets */ 3227 r = rs_adjust_data_offsets(rs); 3228 if (r) 3229 goto bad; 3230 3231 /* Catch any inconclusive reshape superblock content. */ 3232 rs_reset_inconclusive_reshape(rs); 3233 3234 /* Start raid set read-only and assumed clean to change in raid_resume() */ 3235 rs->md.ro = 1; 3236 rs->md.in_sync = 1; 3237 3238 /* Keep array frozen until resume. */ 3239 set_bit(MD_RECOVERY_FROZEN, &rs->md.recovery); 3240 3241 /* Has to be held on running the array */ 3242 mddev_lock_nointr(&rs->md); 3243 r = md_run(&rs->md); 3244 rs->md.in_sync = 0; /* Assume already marked dirty */ 3245 if (r) { 3246 ti->error = "Failed to run raid array"; 3247 mddev_unlock(&rs->md); 3248 goto bad; 3249 } 3250 3251 r = md_start(&rs->md); 3252 if (r) { 3253 ti->error = "Failed to start raid array"; 3254 mddev_unlock(&rs->md); 3255 goto bad_md_start; 3256 } 3257 3258 /* If raid4/5/6 journal mode explicitly requested (only possible with journal dev) -> set it */ 3259 if (test_bit(__CTR_FLAG_JOURNAL_MODE, &rs->ctr_flags)) { 3260 r = r5c_journal_mode_set(&rs->md, rs->journal_dev.mode); 3261 if (r) { 3262 ti->error = "Failed to set raid4/5/6 journal mode"; 3263 mddev_unlock(&rs->md); 3264 goto bad_journal_mode_set; 3265 } 3266 } 3267 3268 mddev_suspend(&rs->md); 3269 set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags); 3270 3271 /* Try to adjust the raid4/5/6 stripe cache size to the stripe size */ 3272 if (rs_is_raid456(rs)) { 3273 r = rs_set_raid456_stripe_cache(rs); 3274 if (r) 3275 goto bad_stripe_cache; 3276 } 3277 3278 /* Now do an early reshape check */ 3279 if (test_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) { 3280 r = rs_check_reshape(rs); 3281 if (r) 3282 goto bad_check_reshape; 3283 3284 /* Restore new, ctr requested layout to perform check */ 3285 rs_config_restore(rs, &rs_layout); 3286 3287 if (rs->md.pers->start_reshape) { 3288 r = rs->md.pers->check_reshape(&rs->md); 3289 if (r) { 3290 ti->error = "Reshape check failed"; 3291 goto bad_check_reshape; 3292 } 3293 } 3294 } 3295 3296 /* Disable/enable discard support on raid set. */ 3297 configure_discard_support(rs); 3298 3299 mddev_unlock(&rs->md); 3300 return 0; 3301 3302 bad_md_start: 3303 bad_journal_mode_set: 3304 bad_stripe_cache: 3305 bad_check_reshape: 3306 md_stop(&rs->md); 3307 bad: 3308 raid_set_free(rs); 3309 3310 return r; 3311 } 3312 3313 static void raid_dtr(struct dm_target *ti) 3314 { 3315 struct raid_set *rs = ti->private; 3316 3317 md_stop(&rs->md); 3318 raid_set_free(rs); 3319 } 3320 3321 static int raid_map(struct dm_target *ti, struct bio *bio) 3322 { 3323 struct raid_set *rs = ti->private; 3324 struct mddev *mddev = &rs->md; 3325 3326 /* 3327 * If we're reshaping to add disk(s)), ti->len and 3328 * mddev->array_sectors will differ during the process 3329 * (ti->len > mddev->array_sectors), so we have to requeue 3330 * bios with addresses > mddev->array_sectors here or 3331 * there will occur accesses past EOD of the component 3332 * data images thus erroring the raid set. 3333 */ 3334 if (unlikely(bio_end_sector(bio) > mddev->array_sectors)) 3335 return DM_MAPIO_REQUEUE; 3336 3337 md_handle_request(mddev, bio); 3338 3339 return DM_MAPIO_SUBMITTED; 3340 } 3341 3342 /* Return sync state string for @state */ 3343 enum sync_state { st_frozen, st_reshape, st_resync, st_check, st_repair, st_recover, st_idle }; 3344 static const char *sync_str(enum sync_state state) 3345 { 3346 /* Has to be in above sync_state order! */ 3347 static const char *sync_strs[] = { 3348 "frozen", 3349 "reshape", 3350 "resync", 3351 "check", 3352 "repair", 3353 "recover", 3354 "idle" 3355 }; 3356 3357 return __within_range(state, 0, ARRAY_SIZE(sync_strs) - 1) ? sync_strs[state] : "undef"; 3358 }; 3359 3360 /* Return enum sync_state for @mddev derived from @recovery flags */ 3361 static enum sync_state decipher_sync_action(struct mddev *mddev, unsigned long recovery) 3362 { 3363 if (test_bit(MD_RECOVERY_FROZEN, &recovery)) 3364 return st_frozen; 3365 3366 /* The MD sync thread can be done with io or be interrupted but still be running */ 3367 if (!test_bit(MD_RECOVERY_DONE, &recovery) && 3368 (test_bit(MD_RECOVERY_RUNNING, &recovery) || 3369 (!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &recovery)))) { 3370 if (test_bit(MD_RECOVERY_RESHAPE, &recovery)) 3371 return st_reshape; 3372 3373 if (test_bit(MD_RECOVERY_SYNC, &recovery)) { 3374 if (!test_bit(MD_RECOVERY_REQUESTED, &recovery)) 3375 return st_resync; 3376 if (test_bit(MD_RECOVERY_CHECK, &recovery)) 3377 return st_check; 3378 return st_repair; 3379 } 3380 3381 if (test_bit(MD_RECOVERY_RECOVER, &recovery)) 3382 return st_recover; 3383 3384 if (mddev->reshape_position != MaxSector) 3385 return st_reshape; 3386 } 3387 3388 return st_idle; 3389 } 3390 3391 /* 3392 * Return status string for @rdev 3393 * 3394 * Status characters: 3395 * 3396 * 'D' = Dead/Failed raid set component or raid4/5/6 journal device 3397 * 'a' = Alive but not in-sync raid set component _or_ alive raid4/5/6 'write_back' journal device 3398 * 'A' = Alive and in-sync raid set component _or_ alive raid4/5/6 'write_through' journal device 3399 * '-' = Non-existing device (i.e. uspace passed '- -' into the ctr) 3400 */ 3401 static const char *__raid_dev_status(struct raid_set *rs, struct md_rdev *rdev) 3402 { 3403 if (!rdev->bdev) 3404 return "-"; 3405 else if (test_bit(Faulty, &rdev->flags)) 3406 return "D"; 3407 else if (test_bit(Journal, &rdev->flags)) 3408 return (rs->journal_dev.mode == R5C_JOURNAL_MODE_WRITE_THROUGH) ? "A" : "a"; 3409 else if (test_bit(RT_FLAG_RS_RESYNCING, &rs->runtime_flags) || 3410 (!test_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags) && 3411 !test_bit(In_sync, &rdev->flags))) 3412 return "a"; 3413 else 3414 return "A"; 3415 } 3416 3417 /* Helper to return resync/reshape progress for @rs and runtime flags for raid set in sync / resynching */ 3418 static sector_t rs_get_progress(struct raid_set *rs, unsigned long recovery, 3419 enum sync_state state, sector_t resync_max_sectors) 3420 { 3421 sector_t r; 3422 struct mddev *mddev = &rs->md; 3423 3424 clear_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags); 3425 clear_bit(RT_FLAG_RS_RESYNCING, &rs->runtime_flags); 3426 3427 if (rs_is_raid0(rs)) { 3428 r = resync_max_sectors; 3429 set_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags); 3430 3431 } else { 3432 if (state == st_idle && !test_bit(MD_RECOVERY_INTR, &recovery)) 3433 r = mddev->recovery_cp; 3434 else 3435 r = mddev->curr_resync_completed; 3436 3437 if (state == st_idle && r >= resync_max_sectors) { 3438 /* 3439 * Sync complete. 3440 */ 3441 /* In case we have finished recovering, the array is in sync. */ 3442 if (test_bit(MD_RECOVERY_RECOVER, &recovery)) 3443 set_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags); 3444 3445 } else if (state == st_recover) 3446 /* 3447 * In case we are recovering, the array is not in sync 3448 * and health chars should show the recovering legs. 3449 * 3450 * Already retrieved recovery offset from curr_resync_completed above. 3451 */ 3452 ; 3453 3454 else if (state == st_resync || state == st_reshape) 3455 /* 3456 * If "resync/reshape" is occurring, the raid set 3457 * is or may be out of sync hence the health 3458 * characters shall be 'a'. 3459 */ 3460 set_bit(RT_FLAG_RS_RESYNCING, &rs->runtime_flags); 3461 3462 else if (state == st_check || state == st_repair) 3463 /* 3464 * If "check" or "repair" is occurring, the raid set has 3465 * undergone an initial sync and the health characters 3466 * should not be 'a' anymore. 3467 */ 3468 set_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags); 3469 3470 else if (test_bit(MD_RECOVERY_NEEDED, &recovery)) 3471 /* 3472 * We are idle and recovery is needed, prevent 'A' chars race 3473 * caused by components still set to in-sync by constructor. 3474 */ 3475 set_bit(RT_FLAG_RS_RESYNCING, &rs->runtime_flags); 3476 3477 else { 3478 /* 3479 * We are idle and the raid set may be doing an initial 3480 * sync, or it may be rebuilding individual components. 3481 * If all the devices are In_sync, then it is the raid set 3482 * that is being initialized. 3483 */ 3484 struct md_rdev *rdev; 3485 3486 set_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags); 3487 rdev_for_each(rdev, mddev) 3488 if (!test_bit(Journal, &rdev->flags) && 3489 !test_bit(In_sync, &rdev->flags)) { 3490 clear_bit(RT_FLAG_RS_IN_SYNC, &rs->runtime_flags); 3491 break; 3492 } 3493 } 3494 } 3495 3496 return min(r, resync_max_sectors); 3497 } 3498 3499 /* Helper to return @dev name or "-" if !@dev */ 3500 static const char *__get_dev_name(struct dm_dev *dev) 3501 { 3502 return dev ? dev->name : "-"; 3503 } 3504 3505 static void raid_status(struct dm_target *ti, status_type_t type, 3506 unsigned int status_flags, char *result, unsigned int maxlen) 3507 { 3508 struct raid_set *rs = ti->private; 3509 struct mddev *mddev = &rs->md; 3510 struct r5conf *conf = rs_is_raid456(rs) ? mddev->private : NULL; 3511 int i, max_nr_stripes = conf ? conf->max_nr_stripes : 0; 3512 unsigned long recovery; 3513 unsigned int raid_param_cnt = 1; /* at least 1 for chunksize */ 3514 unsigned int sz = 0; 3515 unsigned int rebuild_writemostly_count = 0; 3516 sector_t progress, resync_max_sectors, resync_mismatches; 3517 enum sync_state state; 3518 struct raid_type *rt; 3519 3520 switch (type) { 3521 case STATUSTYPE_INFO: 3522 /* *Should* always succeed */ 3523 rt = get_raid_type_by_ll(mddev->new_level, mddev->new_layout); 3524 if (!rt) 3525 return; 3526 3527 DMEMIT("%s %d ", rt->name, mddev->raid_disks); 3528 3529 /* Access most recent mddev properties for status output */ 3530 smp_rmb(); 3531 /* Get sensible max sectors even if raid set not yet started */ 3532 resync_max_sectors = test_bit(RT_FLAG_RS_PRERESUMED, &rs->runtime_flags) ? 3533 mddev->resync_max_sectors : mddev->dev_sectors; 3534 recovery = rs->md.recovery; 3535 state = decipher_sync_action(mddev, recovery); 3536 progress = rs_get_progress(rs, recovery, state, resync_max_sectors); 3537 resync_mismatches = (mddev->last_sync_action && !strcasecmp(mddev->last_sync_action, "check")) ? 3538 atomic64_read(&mddev->resync_mismatches) : 0; 3539 3540 /* HM FIXME: do we want another state char for raid0? It shows 'D'/'A'/'-' now */ 3541 for (i = 0; i < rs->raid_disks; i++) 3542 DMEMIT(__raid_dev_status(rs, &rs->dev[i].rdev)); 3543 3544 /* 3545 * In-sync/Reshape ratio: 3546 * The in-sync ratio shows the progress of: 3547 * - Initializing the raid set 3548 * - Rebuilding a subset of devices of the raid set 3549 * The user can distinguish between the two by referring 3550 * to the status characters. 3551 * 3552 * The reshape ratio shows the progress of 3553 * changing the raid layout or the number of 3554 * disks of a raid set 3555 */ 3556 DMEMIT(" %llu/%llu", (unsigned long long) progress, 3557 (unsigned long long) resync_max_sectors); 3558 3559 /* 3560 * v1.5.0+: 3561 * 3562 * Sync action: 3563 * See Documentation/admin-guide/device-mapper/dm-raid.rst for 3564 * information on each of these states. 3565 */ 3566 DMEMIT(" %s", sync_str(state)); 3567 3568 /* 3569 * v1.5.0+: 3570 * 3571 * resync_mismatches/mismatch_cnt 3572 * This field shows the number of discrepancies found when 3573 * performing a "check" of the raid set. 3574 */ 3575 DMEMIT(" %llu", (unsigned long long) resync_mismatches); 3576 3577 /* 3578 * v1.9.0+: 3579 * 3580 * data_offset (needed for out of space reshaping) 3581 * This field shows the data offset into the data 3582 * image LV where the first stripes data starts. 3583 * 3584 * We keep data_offset equal on all raid disks of the set, 3585 * so retrieving it from the first raid disk is sufficient. 3586 */ 3587 DMEMIT(" %llu", (unsigned long long) rs->dev[0].rdev.data_offset); 3588 3589 /* 3590 * v1.10.0+: 3591 */ 3592 DMEMIT(" %s", test_bit(__CTR_FLAG_JOURNAL_DEV, &rs->ctr_flags) ? 3593 __raid_dev_status(rs, &rs->journal_dev.rdev) : "-"); 3594 break; 3595 3596 case STATUSTYPE_TABLE: 3597 /* Report the table line string you would use to construct this raid set */ 3598 3599 /* 3600 * Count any rebuild or writemostly argument pairs and subtract the 3601 * hweight count being added below of any rebuild and writemostly ctr flags. 3602 */ 3603 for (i = 0; i < rs->raid_disks; i++) { 3604 rebuild_writemostly_count += (test_bit(i, (void *) rs->rebuild_disks) ? 2 : 0) + 3605 (test_bit(WriteMostly, &rs->dev[i].rdev.flags) ? 2 : 0); 3606 } 3607 rebuild_writemostly_count -= (test_bit(__CTR_FLAG_REBUILD, &rs->ctr_flags) ? 2 : 0) + 3608 (test_bit(__CTR_FLAG_WRITE_MOSTLY, &rs->ctr_flags) ? 2 : 0); 3609 /* Calculate raid parameter count based on ^ rebuild/writemostly argument counts and ctr flags set. */ 3610 raid_param_cnt += rebuild_writemostly_count + 3611 hweight32(rs->ctr_flags & CTR_FLAG_OPTIONS_NO_ARGS) + 3612 hweight32(rs->ctr_flags & CTR_FLAG_OPTIONS_ONE_ARG) * 2; 3613 /* Emit table line */ 3614 /* This has to be in the documented order for userspace! */ 3615 DMEMIT("%s %u %u", rs->raid_type->name, raid_param_cnt, mddev->new_chunk_sectors); 3616 if (test_bit(__CTR_FLAG_SYNC, &rs->ctr_flags)) 3617 DMEMIT(" %s", dm_raid_arg_name_by_flag(CTR_FLAG_SYNC)); 3618 if (test_bit(__CTR_FLAG_NOSYNC, &rs->ctr_flags)) 3619 DMEMIT(" %s", dm_raid_arg_name_by_flag(CTR_FLAG_NOSYNC)); 3620 if (test_bit(__CTR_FLAG_REBUILD, &rs->ctr_flags)) 3621 for (i = 0; i < rs->raid_disks; i++) 3622 if (test_bit(i, (void *) rs->rebuild_disks)) 3623 DMEMIT(" %s %u", dm_raid_arg_name_by_flag(CTR_FLAG_REBUILD), i); 3624 if (test_bit(__CTR_FLAG_DAEMON_SLEEP, &rs->ctr_flags)) 3625 DMEMIT(" %s %lu", dm_raid_arg_name_by_flag(CTR_FLAG_DAEMON_SLEEP), 3626 mddev->bitmap_info.daemon_sleep); 3627 if (test_bit(__CTR_FLAG_MIN_RECOVERY_RATE, &rs->ctr_flags)) 3628 DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_MIN_RECOVERY_RATE), 3629 mddev->sync_speed_min); 3630 if (test_bit(__CTR_FLAG_MAX_RECOVERY_RATE, &rs->ctr_flags)) 3631 DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_MAX_RECOVERY_RATE), 3632 mddev->sync_speed_max); 3633 if (test_bit(__CTR_FLAG_WRITE_MOSTLY, &rs->ctr_flags)) 3634 for (i = 0; i < rs->raid_disks; i++) 3635 if (test_bit(WriteMostly, &rs->dev[i].rdev.flags)) 3636 DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_WRITE_MOSTLY), 3637 rs->dev[i].rdev.raid_disk); 3638 if (test_bit(__CTR_FLAG_MAX_WRITE_BEHIND, &rs->ctr_flags)) 3639 DMEMIT(" %s %lu", dm_raid_arg_name_by_flag(CTR_FLAG_MAX_WRITE_BEHIND), 3640 mddev->bitmap_info.max_write_behind); 3641 if (test_bit(__CTR_FLAG_STRIPE_CACHE, &rs->ctr_flags)) 3642 DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_STRIPE_CACHE), 3643 max_nr_stripes); 3644 if (test_bit(__CTR_FLAG_REGION_SIZE, &rs->ctr_flags)) 3645 DMEMIT(" %s %llu", dm_raid_arg_name_by_flag(CTR_FLAG_REGION_SIZE), 3646 (unsigned long long) to_sector(mddev->bitmap_info.chunksize)); 3647 if (test_bit(__CTR_FLAG_RAID10_COPIES, &rs->ctr_flags)) 3648 DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_RAID10_COPIES), 3649 raid10_md_layout_to_copies(mddev->layout)); 3650 if (test_bit(__CTR_FLAG_RAID10_FORMAT, &rs->ctr_flags)) 3651 DMEMIT(" %s %s", dm_raid_arg_name_by_flag(CTR_FLAG_RAID10_FORMAT), 3652 raid10_md_layout_to_format(mddev->layout)); 3653 if (test_bit(__CTR_FLAG_DELTA_DISKS, &rs->ctr_flags)) 3654 DMEMIT(" %s %d", dm_raid_arg_name_by_flag(CTR_FLAG_DELTA_DISKS), 3655 max(rs->delta_disks, mddev->delta_disks)); 3656 if (test_bit(__CTR_FLAG_DATA_OFFSET, &rs->ctr_flags)) 3657 DMEMIT(" %s %llu", dm_raid_arg_name_by_flag(CTR_FLAG_DATA_OFFSET), 3658 (unsigned long long) rs->data_offset); 3659 if (test_bit(__CTR_FLAG_JOURNAL_DEV, &rs->ctr_flags)) 3660 DMEMIT(" %s %s", dm_raid_arg_name_by_flag(CTR_FLAG_JOURNAL_DEV), 3661 __get_dev_name(rs->journal_dev.dev)); 3662 if (test_bit(__CTR_FLAG_JOURNAL_MODE, &rs->ctr_flags)) 3663 DMEMIT(" %s %s", dm_raid_arg_name_by_flag(CTR_FLAG_JOURNAL_MODE), 3664 md_journal_mode_to_dm_raid(rs->journal_dev.mode)); 3665 DMEMIT(" %d", rs->raid_disks); 3666 for (i = 0; i < rs->raid_disks; i++) 3667 DMEMIT(" %s %s", __get_dev_name(rs->dev[i].meta_dev), 3668 __get_dev_name(rs->dev[i].data_dev)); 3669 break; 3670 3671 case STATUSTYPE_IMA: 3672 rt = get_raid_type_by_ll(mddev->new_level, mddev->new_layout); 3673 if (!rt) 3674 return; 3675 3676 DMEMIT_TARGET_NAME_VERSION(ti->type); 3677 DMEMIT(",raid_type=%s,raid_disks=%d", rt->name, mddev->raid_disks); 3678 3679 /* Access most recent mddev properties for status output */ 3680 smp_rmb(); 3681 recovery = rs->md.recovery; 3682 state = decipher_sync_action(mddev, recovery); 3683 DMEMIT(",raid_state=%s", sync_str(state)); 3684 3685 for (i = 0; i < rs->raid_disks; i++) { 3686 DMEMIT(",raid_device_%d_status=", i); 3687 DMEMIT(__raid_dev_status(rs, &rs->dev[i].rdev)); 3688 } 3689 3690 if (rt_is_raid456(rt)) { 3691 DMEMIT(",journal_dev_mode="); 3692 switch (rs->journal_dev.mode) { 3693 case R5C_JOURNAL_MODE_WRITE_THROUGH: 3694 DMEMIT("%s", 3695 _raid456_journal_mode[R5C_JOURNAL_MODE_WRITE_THROUGH].param); 3696 break; 3697 case R5C_JOURNAL_MODE_WRITE_BACK: 3698 DMEMIT("%s", 3699 _raid456_journal_mode[R5C_JOURNAL_MODE_WRITE_BACK].param); 3700 break; 3701 default: 3702 DMEMIT("invalid"); 3703 break; 3704 } 3705 } 3706 DMEMIT(";"); 3707 break; 3708 } 3709 } 3710 3711 static int raid_message(struct dm_target *ti, unsigned int argc, char **argv, 3712 char *result, unsigned int maxlen) 3713 { 3714 struct raid_set *rs = ti->private; 3715 struct mddev *mddev = &rs->md; 3716 3717 if (!mddev->pers || !mddev->pers->sync_request) 3718 return -EINVAL; 3719 3720 if (!strcasecmp(argv[0], "frozen")) 3721 set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); 3722 else 3723 clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); 3724 3725 if (!strcasecmp(argv[0], "idle") || !strcasecmp(argv[0], "frozen")) { 3726 if (mddev->sync_thread) { 3727 set_bit(MD_RECOVERY_INTR, &mddev->recovery); 3728 md_unregister_thread(&mddev->sync_thread); 3729 md_reap_sync_thread(mddev); 3730 } 3731 } else if (decipher_sync_action(mddev, mddev->recovery) != st_idle) 3732 return -EBUSY; 3733 else if (!strcasecmp(argv[0], "resync")) 3734 ; /* MD_RECOVERY_NEEDED set below */ 3735 else if (!strcasecmp(argv[0], "recover")) 3736 set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); 3737 else { 3738 if (!strcasecmp(argv[0], "check")) { 3739 set_bit(MD_RECOVERY_CHECK, &mddev->recovery); 3740 set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); 3741 set_bit(MD_RECOVERY_SYNC, &mddev->recovery); 3742 } else if (!strcasecmp(argv[0], "repair")) { 3743 set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); 3744 set_bit(MD_RECOVERY_SYNC, &mddev->recovery); 3745 } else 3746 return -EINVAL; 3747 } 3748 if (mddev->ro == 2) { 3749 /* A write to sync_action is enough to justify 3750 * canceling read-auto mode 3751 */ 3752 mddev->ro = 0; 3753 if (!mddev->suspended) 3754 md_wakeup_thread(mddev->sync_thread); 3755 } 3756 set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); 3757 if (!mddev->suspended) 3758 md_wakeup_thread(mddev->thread); 3759 3760 return 0; 3761 } 3762 3763 static int raid_iterate_devices(struct dm_target *ti, 3764 iterate_devices_callout_fn fn, void *data) 3765 { 3766 struct raid_set *rs = ti->private; 3767 unsigned int i; 3768 int r = 0; 3769 3770 for (i = 0; !r && i < rs->raid_disks; i++) { 3771 if (rs->dev[i].data_dev) { 3772 r = fn(ti, rs->dev[i].data_dev, 3773 0, /* No offset on data devs */ 3774 rs->md.dev_sectors, data); 3775 } 3776 } 3777 3778 return r; 3779 } 3780 3781 static void raid_io_hints(struct dm_target *ti, struct queue_limits *limits) 3782 { 3783 struct raid_set *rs = ti->private; 3784 unsigned int chunk_size_bytes = to_bytes(rs->md.chunk_sectors); 3785 3786 blk_limits_io_min(limits, chunk_size_bytes); 3787 blk_limits_io_opt(limits, chunk_size_bytes * mddev_data_stripes(rs)); 3788 } 3789 3790 static void raid_postsuspend(struct dm_target *ti) 3791 { 3792 struct raid_set *rs = ti->private; 3793 3794 if (!test_and_set_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags)) { 3795 /* Writes have to be stopped before suspending to avoid deadlocks. */ 3796 if (!test_bit(MD_RECOVERY_FROZEN, &rs->md.recovery)) 3797 md_stop_writes(&rs->md); 3798 3799 mddev_lock_nointr(&rs->md); 3800 mddev_suspend(&rs->md); 3801 mddev_unlock(&rs->md); 3802 } 3803 } 3804 3805 static void attempt_restore_of_faulty_devices(struct raid_set *rs) 3806 { 3807 int i; 3808 uint64_t cleared_failed_devices[DISKS_ARRAY_ELEMS]; 3809 unsigned long flags; 3810 bool cleared = false; 3811 struct dm_raid_superblock *sb; 3812 struct mddev *mddev = &rs->md; 3813 struct md_rdev *r; 3814 3815 /* RAID personalities have to provide hot add/remove methods or we need to bail out. */ 3816 if (!mddev->pers || !mddev->pers->hot_add_disk || !mddev->pers->hot_remove_disk) 3817 return; 3818 3819 memset(cleared_failed_devices, 0, sizeof(cleared_failed_devices)); 3820 3821 for (i = 0; i < rs->raid_disks; i++) { 3822 r = &rs->dev[i].rdev; 3823 /* HM FIXME: enhance journal device recovery processing */ 3824 if (test_bit(Journal, &r->flags)) 3825 continue; 3826 3827 if (test_bit(Faulty, &r->flags) && 3828 r->meta_bdev && !read_disk_sb(r, r->sb_size, true)) { 3829 DMINFO("Faulty %s device #%d has readable super block." 3830 " Attempting to revive it.", 3831 rs->raid_type->name, i); 3832 3833 /* 3834 * Faulty bit may be set, but sometimes the array can 3835 * be suspended before the personalities can respond 3836 * by removing the device from the array (i.e. calling 3837 * 'hot_remove_disk'). If they haven't yet removed 3838 * the failed device, its 'raid_disk' number will be 3839 * '>= 0' - meaning we must call this function 3840 * ourselves. 3841 */ 3842 flags = r->flags; 3843 clear_bit(In_sync, &r->flags); /* Mandatory for hot remove. */ 3844 if (r->raid_disk >= 0) { 3845 if (mddev->pers->hot_remove_disk(mddev, r)) { 3846 /* Failed to revive this device, try next */ 3847 r->flags = flags; 3848 continue; 3849 } 3850 } else 3851 r->raid_disk = r->saved_raid_disk = i; 3852 3853 clear_bit(Faulty, &r->flags); 3854 clear_bit(WriteErrorSeen, &r->flags); 3855 3856 if (mddev->pers->hot_add_disk(mddev, r)) { 3857 /* Failed to revive this device, try next */ 3858 r->raid_disk = r->saved_raid_disk = -1; 3859 r->flags = flags; 3860 } else { 3861 clear_bit(In_sync, &r->flags); 3862 r->recovery_offset = 0; 3863 set_bit(i, (void *) cleared_failed_devices); 3864 cleared = true; 3865 } 3866 } 3867 } 3868 3869 /* If any failed devices could be cleared, update all sbs failed_devices bits */ 3870 if (cleared) { 3871 uint64_t failed_devices[DISKS_ARRAY_ELEMS]; 3872 3873 rdev_for_each(r, &rs->md) { 3874 if (test_bit(Journal, &r->flags)) 3875 continue; 3876 3877 sb = page_address(r->sb_page); 3878 sb_retrieve_failed_devices(sb, failed_devices); 3879 3880 for (i = 0; i < DISKS_ARRAY_ELEMS; i++) 3881 failed_devices[i] &= ~cleared_failed_devices[i]; 3882 3883 sb_update_failed_devices(sb, failed_devices); 3884 } 3885 } 3886 } 3887 3888 static int __load_dirty_region_bitmap(struct raid_set *rs) 3889 { 3890 int r = 0; 3891 3892 /* Try loading the bitmap unless "raid0", which does not have one */ 3893 if (!rs_is_raid0(rs) && 3894 !test_and_set_bit(RT_FLAG_RS_BITMAP_LOADED, &rs->runtime_flags)) { 3895 r = md_bitmap_load(&rs->md); 3896 if (r) 3897 DMERR("Failed to load bitmap"); 3898 } 3899 3900 return r; 3901 } 3902 3903 /* Enforce updating all superblocks */ 3904 static void rs_update_sbs(struct raid_set *rs) 3905 { 3906 struct mddev *mddev = &rs->md; 3907 int ro = mddev->ro; 3908 3909 set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags); 3910 mddev->ro = 0; 3911 md_update_sb(mddev, 1); 3912 mddev->ro = ro; 3913 } 3914 3915 /* 3916 * Reshape changes raid algorithm of @rs to new one within personality 3917 * (e.g. raid6_zr -> raid6_nc), changes stripe size, adds/removes 3918 * disks from a raid set thus growing/shrinking it or resizes the set 3919 * 3920 * Call mddev_lock_nointr() before! 3921 */ 3922 static int rs_start_reshape(struct raid_set *rs) 3923 { 3924 int r; 3925 struct mddev *mddev = &rs->md; 3926 struct md_personality *pers = mddev->pers; 3927 3928 /* Don't allow the sync thread to work until the table gets reloaded. */ 3929 set_bit(MD_RECOVERY_WAIT, &mddev->recovery); 3930 3931 r = rs_setup_reshape(rs); 3932 if (r) 3933 return r; 3934 3935 /* 3936 * Check any reshape constraints enforced by the personalility 3937 * 3938 * May as well already kick the reshape off so that * pers->start_reshape() becomes optional. 3939 */ 3940 r = pers->check_reshape(mddev); 3941 if (r) { 3942 rs->ti->error = "pers->check_reshape() failed"; 3943 return r; 3944 } 3945 3946 /* 3947 * Personality may not provide start reshape method in which 3948 * case check_reshape above has already covered everything 3949 */ 3950 if (pers->start_reshape) { 3951 r = pers->start_reshape(mddev); 3952 if (r) { 3953 rs->ti->error = "pers->start_reshape() failed"; 3954 return r; 3955 } 3956 } 3957 3958 /* 3959 * Now reshape got set up, update superblocks to 3960 * reflect the fact so that a table reload will 3961 * access proper superblock content in the ctr. 3962 */ 3963 rs_update_sbs(rs); 3964 3965 return 0; 3966 } 3967 3968 static int raid_preresume(struct dm_target *ti) 3969 { 3970 int r; 3971 struct raid_set *rs = ti->private; 3972 struct mddev *mddev = &rs->md; 3973 3974 /* This is a resume after a suspend of the set -> it's already started. */ 3975 if (test_and_set_bit(RT_FLAG_RS_PRERESUMED, &rs->runtime_flags)) 3976 return 0; 3977 3978 /* 3979 * The superblocks need to be updated on disk if the 3980 * array is new or new devices got added (thus zeroed 3981 * out by userspace) or __load_dirty_region_bitmap 3982 * will overwrite them in core with old data or fail. 3983 */ 3984 if (test_bit(RT_FLAG_UPDATE_SBS, &rs->runtime_flags)) 3985 rs_update_sbs(rs); 3986 3987 /* Load the bitmap from disk unless raid0 */ 3988 r = __load_dirty_region_bitmap(rs); 3989 if (r) 3990 return r; 3991 3992 /* We are extending the raid set size, adjust mddev/md_rdev sizes and set capacity. */ 3993 if (test_bit(RT_FLAG_RS_GROW, &rs->runtime_flags)) { 3994 mddev->array_sectors = rs->array_sectors; 3995 mddev->dev_sectors = rs->dev_sectors; 3996 rs_set_rdev_sectors(rs); 3997 rs_set_capacity(rs); 3998 } 3999 4000 /* Resize bitmap to adjust to changed region size (aka MD bitmap chunksize) or grown device size */ 4001 if (test_bit(RT_FLAG_RS_BITMAP_LOADED, &rs->runtime_flags) && mddev->bitmap && 4002 (test_bit(RT_FLAG_RS_GROW, &rs->runtime_flags) || 4003 (rs->requested_bitmap_chunk_sectors && 4004 mddev->bitmap_info.chunksize != to_bytes(rs->requested_bitmap_chunk_sectors)))) { 4005 int chunksize = to_bytes(rs->requested_bitmap_chunk_sectors) ?: mddev->bitmap_info.chunksize; 4006 4007 r = md_bitmap_resize(mddev->bitmap, mddev->dev_sectors, chunksize, 0); 4008 if (r) 4009 DMERR("Failed to resize bitmap"); 4010 } 4011 4012 /* Check for any resize/reshape on @rs and adjust/initiate */ 4013 /* Be prepared for mddev_resume() in raid_resume() */ 4014 set_bit(MD_RECOVERY_FROZEN, &mddev->recovery); 4015 if (mddev->recovery_cp && mddev->recovery_cp < MaxSector) { 4016 set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); 4017 mddev->resync_min = mddev->recovery_cp; 4018 if (test_bit(RT_FLAG_RS_GROW, &rs->runtime_flags)) 4019 mddev->resync_max_sectors = mddev->dev_sectors; 4020 } 4021 4022 /* Check for any reshape request unless new raid set */ 4023 if (test_bit(RT_FLAG_RESHAPE_RS, &rs->runtime_flags)) { 4024 /* Initiate a reshape. */ 4025 rs_set_rdev_sectors(rs); 4026 mddev_lock_nointr(mddev); 4027 r = rs_start_reshape(rs); 4028 mddev_unlock(mddev); 4029 if (r) 4030 DMWARN("Failed to check/start reshape, continuing without change"); 4031 r = 0; 4032 } 4033 4034 return r; 4035 } 4036 4037 static void raid_resume(struct dm_target *ti) 4038 { 4039 struct raid_set *rs = ti->private; 4040 struct mddev *mddev = &rs->md; 4041 4042 if (test_and_set_bit(RT_FLAG_RS_RESUMED, &rs->runtime_flags)) { 4043 /* 4044 * A secondary resume while the device is active. 4045 * Take this opportunity to check whether any failed 4046 * devices are reachable again. 4047 */ 4048 attempt_restore_of_faulty_devices(rs); 4049 } 4050 4051 if (test_and_clear_bit(RT_FLAG_RS_SUSPENDED, &rs->runtime_flags)) { 4052 /* Only reduce raid set size before running a disk removing reshape. */ 4053 if (mddev->delta_disks < 0) 4054 rs_set_capacity(rs); 4055 4056 mddev_lock_nointr(mddev); 4057 clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery); 4058 mddev->ro = 0; 4059 mddev->in_sync = 0; 4060 mddev_resume(mddev); 4061 mddev_unlock(mddev); 4062 } 4063 } 4064 4065 static struct target_type raid_target = { 4066 .name = "raid", 4067 .version = {1, 15, 1}, 4068 .module = THIS_MODULE, 4069 .ctr = raid_ctr, 4070 .dtr = raid_dtr, 4071 .map = raid_map, 4072 .status = raid_status, 4073 .message = raid_message, 4074 .iterate_devices = raid_iterate_devices, 4075 .io_hints = raid_io_hints, 4076 .postsuspend = raid_postsuspend, 4077 .preresume = raid_preresume, 4078 .resume = raid_resume, 4079 }; 4080 module_dm(raid); 4081 4082 module_param(devices_handle_discard_safely, bool, 0644); 4083 MODULE_PARM_DESC(devices_handle_discard_safely, 4084 "Set to Y if all devices in each array reliably return zeroes on reads from discarded regions"); 4085 4086 MODULE_DESCRIPTION(DM_NAME " raid0/1/10/4/5/6 target"); 4087 MODULE_ALIAS("dm-raid0"); 4088 MODULE_ALIAS("dm-raid1"); 4089 MODULE_ALIAS("dm-raid10"); 4090 MODULE_ALIAS("dm-raid4"); 4091 MODULE_ALIAS("dm-raid5"); 4092 MODULE_ALIAS("dm-raid6"); 4093 MODULE_AUTHOR("Neil Brown <dm-devel@redhat.com>"); 4094 MODULE_AUTHOR("Heinz Mauelshagen <dm-devel@redhat.com>"); 4095 MODULE_LICENSE("GPL"); 4096