xref: /openbmc/linux/drivers/md/dm-mpath.c (revision 3e26a691)
1 /*
2  * Copyright (C) 2003 Sistina Software Limited.
3  * Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
4  *
5  * This file is released under the GPL.
6  */
7 
8 #include <linux/device-mapper.h>
9 
10 #include "dm.h"
11 #include "dm-path-selector.h"
12 #include "dm-uevent.h"
13 
14 #include <linux/blkdev.h>
15 #include <linux/ctype.h>
16 #include <linux/init.h>
17 #include <linux/mempool.h>
18 #include <linux/module.h>
19 #include <linux/pagemap.h>
20 #include <linux/slab.h>
21 #include <linux/time.h>
22 #include <linux/workqueue.h>
23 #include <linux/delay.h>
24 #include <scsi/scsi_dh.h>
25 #include <linux/atomic.h>
26 #include <linux/blk-mq.h>
27 
28 #define DM_MSG_PREFIX "multipath"
29 #define DM_PG_INIT_DELAY_MSECS 2000
30 #define DM_PG_INIT_DELAY_DEFAULT ((unsigned) -1)
31 
32 /* Path properties */
33 struct pgpath {
34 	struct list_head list;
35 
36 	struct priority_group *pg;	/* Owning PG */
37 	unsigned fail_count;		/* Cumulative failure count */
38 
39 	struct dm_path path;
40 	struct delayed_work activate_path;
41 
42 	bool is_active:1;		/* Path status */
43 };
44 
45 #define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path)
46 
47 /*
48  * Paths are grouped into Priority Groups and numbered from 1 upwards.
49  * Each has a path selector which controls which path gets used.
50  */
51 struct priority_group {
52 	struct list_head list;
53 
54 	struct multipath *m;		/* Owning multipath instance */
55 	struct path_selector ps;
56 
57 	unsigned pg_num;		/* Reference number */
58 	unsigned nr_pgpaths;		/* Number of paths in PG */
59 	struct list_head pgpaths;
60 
61 	bool bypassed:1;		/* Temporarily bypass this PG? */
62 };
63 
64 /* Multipath context */
65 struct multipath {
66 	struct list_head list;
67 	struct dm_target *ti;
68 
69 	const char *hw_handler_name;
70 	char *hw_handler_params;
71 
72 	spinlock_t lock;
73 
74 	unsigned nr_priority_groups;
75 	struct list_head priority_groups;
76 
77 	wait_queue_head_t pg_init_wait;	/* Wait for pg_init completion */
78 
79 	unsigned pg_init_in_progress;	/* Only one pg_init allowed at once */
80 
81 	unsigned nr_valid_paths;	/* Total number of usable paths */
82 	struct pgpath *current_pgpath;
83 	struct priority_group *current_pg;
84 	struct priority_group *next_pg;	/* Switch to this PG if set */
85 
86 	bool queue_io:1;		/* Must we queue all I/O? */
87 	bool queue_if_no_path:1;	/* Queue I/O if last path fails? */
88 	bool saved_queue_if_no_path:1;	/* Saved state during suspension */
89 	bool retain_attached_hw_handler:1; /* If there's already a hw_handler present, don't change it. */
90 	bool pg_init_disabled:1;	/* pg_init is not currently allowed */
91 	bool pg_init_required:1;	/* pg_init needs calling? */
92 	bool pg_init_delay_retry:1;	/* Delay pg_init retry? */
93 
94 	unsigned pg_init_retries;	/* Number of times to retry pg_init */
95 	unsigned pg_init_count;		/* Number of times pg_init called */
96 	unsigned pg_init_delay_msecs;	/* Number of msecs before pg_init retry */
97 
98 	struct work_struct trigger_event;
99 
100 	/*
101 	 * We must use a mempool of dm_mpath_io structs so that we
102 	 * can resubmit bios on error.
103 	 */
104 	mempool_t *mpio_pool;
105 
106 	struct mutex work_mutex;
107 };
108 
109 /*
110  * Context information attached to each bio we process.
111  */
112 struct dm_mpath_io {
113 	struct pgpath *pgpath;
114 	size_t nr_bytes;
115 };
116 
117 typedef int (*action_fn) (struct pgpath *pgpath);
118 
119 static struct kmem_cache *_mpio_cache;
120 
121 static struct workqueue_struct *kmultipathd, *kmpath_handlerd;
122 static void trigger_event(struct work_struct *work);
123 static void activate_path(struct work_struct *work);
124 
125 
126 /*-----------------------------------------------
127  * Allocation routines
128  *-----------------------------------------------*/
129 
130 static struct pgpath *alloc_pgpath(void)
131 {
132 	struct pgpath *pgpath = kzalloc(sizeof(*pgpath), GFP_KERNEL);
133 
134 	if (pgpath) {
135 		pgpath->is_active = true;
136 		INIT_DELAYED_WORK(&pgpath->activate_path, activate_path);
137 	}
138 
139 	return pgpath;
140 }
141 
142 static void free_pgpath(struct pgpath *pgpath)
143 {
144 	kfree(pgpath);
145 }
146 
147 static struct priority_group *alloc_priority_group(void)
148 {
149 	struct priority_group *pg;
150 
151 	pg = kzalloc(sizeof(*pg), GFP_KERNEL);
152 
153 	if (pg)
154 		INIT_LIST_HEAD(&pg->pgpaths);
155 
156 	return pg;
157 }
158 
159 static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
160 {
161 	struct pgpath *pgpath, *tmp;
162 
163 	list_for_each_entry_safe(pgpath, tmp, pgpaths, list) {
164 		list_del(&pgpath->list);
165 		dm_put_device(ti, pgpath->path.dev);
166 		free_pgpath(pgpath);
167 	}
168 }
169 
170 static void free_priority_group(struct priority_group *pg,
171 				struct dm_target *ti)
172 {
173 	struct path_selector *ps = &pg->ps;
174 
175 	if (ps->type) {
176 		ps->type->destroy(ps);
177 		dm_put_path_selector(ps->type);
178 	}
179 
180 	free_pgpaths(&pg->pgpaths, ti);
181 	kfree(pg);
182 }
183 
184 static struct multipath *alloc_multipath(struct dm_target *ti, bool use_blk_mq)
185 {
186 	struct multipath *m;
187 
188 	m = kzalloc(sizeof(*m), GFP_KERNEL);
189 	if (m) {
190 		INIT_LIST_HEAD(&m->priority_groups);
191 		spin_lock_init(&m->lock);
192 		m->queue_io = true;
193 		m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT;
194 		INIT_WORK(&m->trigger_event, trigger_event);
195 		init_waitqueue_head(&m->pg_init_wait);
196 		mutex_init(&m->work_mutex);
197 
198 		m->mpio_pool = NULL;
199 		if (!use_blk_mq) {
200 			unsigned min_ios = dm_get_reserved_rq_based_ios();
201 
202 			m->mpio_pool = mempool_create_slab_pool(min_ios, _mpio_cache);
203 			if (!m->mpio_pool) {
204 				kfree(m);
205 				return NULL;
206 			}
207 		}
208 
209 		m->ti = ti;
210 		ti->private = m;
211 	}
212 
213 	return m;
214 }
215 
216 static void free_multipath(struct multipath *m)
217 {
218 	struct priority_group *pg, *tmp;
219 
220 	list_for_each_entry_safe(pg, tmp, &m->priority_groups, list) {
221 		list_del(&pg->list);
222 		free_priority_group(pg, m->ti);
223 	}
224 
225 	kfree(m->hw_handler_name);
226 	kfree(m->hw_handler_params);
227 	mempool_destroy(m->mpio_pool);
228 	kfree(m);
229 }
230 
231 static struct dm_mpath_io *get_mpio(union map_info *info)
232 {
233 	return info->ptr;
234 }
235 
236 static struct dm_mpath_io *set_mpio(struct multipath *m, union map_info *info)
237 {
238 	struct dm_mpath_io *mpio;
239 
240 	if (!m->mpio_pool) {
241 		/* Use blk-mq pdu memory requested via per_io_data_size */
242 		mpio = get_mpio(info);
243 		memset(mpio, 0, sizeof(*mpio));
244 		return mpio;
245 	}
246 
247 	mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC);
248 	if (!mpio)
249 		return NULL;
250 
251 	memset(mpio, 0, sizeof(*mpio));
252 	info->ptr = mpio;
253 
254 	return mpio;
255 }
256 
257 static void clear_request_fn_mpio(struct multipath *m, union map_info *info)
258 {
259 	/* Only needed for non blk-mq (.request_fn) multipath */
260 	if (m->mpio_pool) {
261 		struct dm_mpath_io *mpio = info->ptr;
262 
263 		info->ptr = NULL;
264 		mempool_free(mpio, m->mpio_pool);
265 	}
266 }
267 
268 /*-----------------------------------------------
269  * Path selection
270  *-----------------------------------------------*/
271 
272 static int __pg_init_all_paths(struct multipath *m)
273 {
274 	struct pgpath *pgpath;
275 	unsigned long pg_init_delay = 0;
276 
277 	if (m->pg_init_in_progress || m->pg_init_disabled)
278 		return 0;
279 
280 	m->pg_init_count++;
281 	m->pg_init_required = false;
282 
283 	/* Check here to reset pg_init_required */
284 	if (!m->current_pg)
285 		return 0;
286 
287 	if (m->pg_init_delay_retry)
288 		pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ?
289 						 m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS);
290 	list_for_each_entry(pgpath, &m->current_pg->pgpaths, list) {
291 		/* Skip failed paths */
292 		if (!pgpath->is_active)
293 			continue;
294 		if (queue_delayed_work(kmpath_handlerd, &pgpath->activate_path,
295 				       pg_init_delay))
296 			m->pg_init_in_progress++;
297 	}
298 	return m->pg_init_in_progress;
299 }
300 
301 static void __switch_pg(struct multipath *m, struct pgpath *pgpath)
302 {
303 	m->current_pg = pgpath->pg;
304 
305 	/* Must we initialise the PG first, and queue I/O till it's ready? */
306 	if (m->hw_handler_name) {
307 		m->pg_init_required = true;
308 		m->queue_io = true;
309 	} else {
310 		m->pg_init_required = false;
311 		m->queue_io = false;
312 	}
313 
314 	m->pg_init_count = 0;
315 }
316 
317 static int __choose_path_in_pg(struct multipath *m, struct priority_group *pg,
318 			       size_t nr_bytes)
319 {
320 	struct dm_path *path;
321 
322 	path = pg->ps.type->select_path(&pg->ps, nr_bytes);
323 	if (!path)
324 		return -ENXIO;
325 
326 	m->current_pgpath = path_to_pgpath(path);
327 
328 	if (m->current_pg != pg)
329 		__switch_pg(m, m->current_pgpath);
330 
331 	return 0;
332 }
333 
334 static void __choose_pgpath(struct multipath *m, size_t nr_bytes)
335 {
336 	struct priority_group *pg;
337 	bool bypassed = true;
338 
339 	if (!m->nr_valid_paths) {
340 		m->queue_io = false;
341 		goto failed;
342 	}
343 
344 	/* Were we instructed to switch PG? */
345 	if (m->next_pg) {
346 		pg = m->next_pg;
347 		m->next_pg = NULL;
348 		if (!__choose_path_in_pg(m, pg, nr_bytes))
349 			return;
350 	}
351 
352 	/* Don't change PG until it has no remaining paths */
353 	if (m->current_pg && !__choose_path_in_pg(m, m->current_pg, nr_bytes))
354 		return;
355 
356 	/*
357 	 * Loop through priority groups until we find a valid path.
358 	 * First time we skip PGs marked 'bypassed'.
359 	 * Second time we only try the ones we skipped, but set
360 	 * pg_init_delay_retry so we do not hammer controllers.
361 	 */
362 	do {
363 		list_for_each_entry(pg, &m->priority_groups, list) {
364 			if (pg->bypassed == bypassed)
365 				continue;
366 			if (!__choose_path_in_pg(m, pg, nr_bytes)) {
367 				if (!bypassed)
368 					m->pg_init_delay_retry = true;
369 				return;
370 			}
371 		}
372 	} while (bypassed--);
373 
374 failed:
375 	m->current_pgpath = NULL;
376 	m->current_pg = NULL;
377 }
378 
379 /*
380  * Check whether bios must be queued in the device-mapper core rather
381  * than here in the target.
382  *
383  * m->lock must be held on entry.
384  *
385  * If m->queue_if_no_path and m->saved_queue_if_no_path hold the
386  * same value then we are not between multipath_presuspend()
387  * and multipath_resume() calls and we have no need to check
388  * for the DMF_NOFLUSH_SUSPENDING flag.
389  */
390 static int __must_push_back(struct multipath *m)
391 {
392 	return (m->queue_if_no_path ||
393 		(m->queue_if_no_path != m->saved_queue_if_no_path &&
394 		 dm_noflush_suspending(m->ti)));
395 }
396 
397 /*
398  * Map cloned requests
399  */
400 static int __multipath_map(struct dm_target *ti, struct request *clone,
401 			   union map_info *map_context,
402 			   struct request *rq, struct request **__clone)
403 {
404 	struct multipath *m = ti->private;
405 	int r = DM_MAPIO_REQUEUE;
406 	size_t nr_bytes = clone ? blk_rq_bytes(clone) : blk_rq_bytes(rq);
407 	struct pgpath *pgpath;
408 	struct block_device *bdev;
409 	struct dm_mpath_io *mpio;
410 
411 	spin_lock_irq(&m->lock);
412 
413 	/* Do we need to select a new pgpath? */
414 	if (!m->current_pgpath || !m->queue_io)
415 		__choose_pgpath(m, nr_bytes);
416 
417 	pgpath = m->current_pgpath;
418 
419 	if (!pgpath) {
420 		if (!__must_push_back(m))
421 			r = -EIO;	/* Failed */
422 		goto out_unlock;
423 	} else if (m->queue_io || m->pg_init_required) {
424 		__pg_init_all_paths(m);
425 		goto out_unlock;
426 	}
427 
428 	mpio = set_mpio(m, map_context);
429 	if (!mpio)
430 		/* ENOMEM, requeue */
431 		goto out_unlock;
432 
433 	mpio->pgpath = pgpath;
434 	mpio->nr_bytes = nr_bytes;
435 
436 	bdev = pgpath->path.dev->bdev;
437 
438 	spin_unlock_irq(&m->lock);
439 
440 	if (clone) {
441 		/*
442 		 * Old request-based interface: allocated clone is passed in.
443 		 * Used by: .request_fn stacked on .request_fn path(s).
444 		 */
445 		clone->q = bdev_get_queue(bdev);
446 		clone->rq_disk = bdev->bd_disk;
447 		clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
448 	} else {
449 		/*
450 		 * blk-mq request-based interface; used by both:
451 		 * .request_fn stacked on blk-mq path(s) and
452 		 * blk-mq stacked on blk-mq path(s).
453 		 */
454 		*__clone = blk_mq_alloc_request(bdev_get_queue(bdev),
455 						rq_data_dir(rq), BLK_MQ_REQ_NOWAIT);
456 		if (IS_ERR(*__clone)) {
457 			/* ENOMEM, requeue */
458 			clear_request_fn_mpio(m, map_context);
459 			return r;
460 		}
461 		(*__clone)->bio = (*__clone)->biotail = NULL;
462 		(*__clone)->rq_disk = bdev->bd_disk;
463 		(*__clone)->cmd_flags |= REQ_FAILFAST_TRANSPORT;
464 	}
465 
466 	if (pgpath->pg->ps.type->start_io)
467 		pgpath->pg->ps.type->start_io(&pgpath->pg->ps,
468 					      &pgpath->path,
469 					      nr_bytes);
470 	return DM_MAPIO_REMAPPED;
471 
472 out_unlock:
473 	spin_unlock_irq(&m->lock);
474 
475 	return r;
476 }
477 
478 static int multipath_map(struct dm_target *ti, struct request *clone,
479 			 union map_info *map_context)
480 {
481 	return __multipath_map(ti, clone, map_context, NULL, NULL);
482 }
483 
484 static int multipath_clone_and_map(struct dm_target *ti, struct request *rq,
485 				   union map_info *map_context,
486 				   struct request **clone)
487 {
488 	return __multipath_map(ti, NULL, map_context, rq, clone);
489 }
490 
491 static void multipath_release_clone(struct request *clone)
492 {
493 	blk_mq_free_request(clone);
494 }
495 
496 /*
497  * If we run out of usable paths, should we queue I/O or error it?
498  */
499 static int queue_if_no_path(struct multipath *m, bool queue_if_no_path,
500 			    bool save_old_value)
501 {
502 	unsigned long flags;
503 
504 	spin_lock_irqsave(&m->lock, flags);
505 
506 	if (save_old_value)
507 		m->saved_queue_if_no_path = m->queue_if_no_path;
508 	else
509 		m->saved_queue_if_no_path = queue_if_no_path;
510 	m->queue_if_no_path = queue_if_no_path;
511 	spin_unlock_irqrestore(&m->lock, flags);
512 
513 	if (!queue_if_no_path)
514 		dm_table_run_md_queue_async(m->ti->table);
515 
516 	return 0;
517 }
518 
519 /*
520  * An event is triggered whenever a path is taken out of use.
521  * Includes path failure and PG bypass.
522  */
523 static void trigger_event(struct work_struct *work)
524 {
525 	struct multipath *m =
526 		container_of(work, struct multipath, trigger_event);
527 
528 	dm_table_event(m->ti->table);
529 }
530 
531 /*-----------------------------------------------------------------
532  * Constructor/argument parsing:
533  * <#multipath feature args> [<arg>]*
534  * <#hw_handler args> [hw_handler [<arg>]*]
535  * <#priority groups>
536  * <initial priority group>
537  *     [<selector> <#selector args> [<arg>]*
538  *      <#paths> <#per-path selector args>
539  *         [<path> [<arg>]* ]+ ]+
540  *---------------------------------------------------------------*/
541 static int parse_path_selector(struct dm_arg_set *as, struct priority_group *pg,
542 			       struct dm_target *ti)
543 {
544 	int r;
545 	struct path_selector_type *pst;
546 	unsigned ps_argc;
547 
548 	static struct dm_arg _args[] = {
549 		{0, 1024, "invalid number of path selector args"},
550 	};
551 
552 	pst = dm_get_path_selector(dm_shift_arg(as));
553 	if (!pst) {
554 		ti->error = "unknown path selector type";
555 		return -EINVAL;
556 	}
557 
558 	r = dm_read_arg_group(_args, as, &ps_argc, &ti->error);
559 	if (r) {
560 		dm_put_path_selector(pst);
561 		return -EINVAL;
562 	}
563 
564 	r = pst->create(&pg->ps, ps_argc, as->argv);
565 	if (r) {
566 		dm_put_path_selector(pst);
567 		ti->error = "path selector constructor failed";
568 		return r;
569 	}
570 
571 	pg->ps.type = pst;
572 	dm_consume_args(as, ps_argc);
573 
574 	return 0;
575 }
576 
577 static struct pgpath *parse_path(struct dm_arg_set *as, struct path_selector *ps,
578 			       struct dm_target *ti)
579 {
580 	int r;
581 	struct pgpath *p;
582 	struct multipath *m = ti->private;
583 	struct request_queue *q = NULL;
584 	const char *attached_handler_name;
585 
586 	/* we need at least a path arg */
587 	if (as->argc < 1) {
588 		ti->error = "no device given";
589 		return ERR_PTR(-EINVAL);
590 	}
591 
592 	p = alloc_pgpath();
593 	if (!p)
594 		return ERR_PTR(-ENOMEM);
595 
596 	r = dm_get_device(ti, dm_shift_arg(as), dm_table_get_mode(ti->table),
597 			  &p->path.dev);
598 	if (r) {
599 		ti->error = "error getting device";
600 		goto bad;
601 	}
602 
603 	if (m->retain_attached_hw_handler || m->hw_handler_name)
604 		q = bdev_get_queue(p->path.dev->bdev);
605 
606 	if (m->retain_attached_hw_handler) {
607 retain:
608 		attached_handler_name = scsi_dh_attached_handler_name(q, GFP_KERNEL);
609 		if (attached_handler_name) {
610 			/*
611 			 * Reset hw_handler_name to match the attached handler
612 			 * and clear any hw_handler_params associated with the
613 			 * ignored handler.
614 			 *
615 			 * NB. This modifies the table line to show the actual
616 			 * handler instead of the original table passed in.
617 			 */
618 			kfree(m->hw_handler_name);
619 			m->hw_handler_name = attached_handler_name;
620 
621 			kfree(m->hw_handler_params);
622 			m->hw_handler_params = NULL;
623 		}
624 	}
625 
626 	if (m->hw_handler_name) {
627 		r = scsi_dh_attach(q, m->hw_handler_name);
628 		if (r == -EBUSY) {
629 			char b[BDEVNAME_SIZE];
630 
631 			printk(KERN_INFO "dm-mpath: retaining handler on device %s\n",
632 				bdevname(p->path.dev->bdev, b));
633 			goto retain;
634 		}
635 		if (r < 0) {
636 			ti->error = "error attaching hardware handler";
637 			dm_put_device(ti, p->path.dev);
638 			goto bad;
639 		}
640 
641 		if (m->hw_handler_params) {
642 			r = scsi_dh_set_params(q, m->hw_handler_params);
643 			if (r < 0) {
644 				ti->error = "unable to set hardware "
645 							"handler parameters";
646 				dm_put_device(ti, p->path.dev);
647 				goto bad;
648 			}
649 		}
650 	}
651 
652 	r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error);
653 	if (r) {
654 		dm_put_device(ti, p->path.dev);
655 		goto bad;
656 	}
657 
658 	return p;
659 
660  bad:
661 	free_pgpath(p);
662 	return ERR_PTR(r);
663 }
664 
665 static struct priority_group *parse_priority_group(struct dm_arg_set *as,
666 						   struct multipath *m)
667 {
668 	static struct dm_arg _args[] = {
669 		{1, 1024, "invalid number of paths"},
670 		{0, 1024, "invalid number of selector args"}
671 	};
672 
673 	int r;
674 	unsigned i, nr_selector_args, nr_args;
675 	struct priority_group *pg;
676 	struct dm_target *ti = m->ti;
677 
678 	if (as->argc < 2) {
679 		as->argc = 0;
680 		ti->error = "not enough priority group arguments";
681 		return ERR_PTR(-EINVAL);
682 	}
683 
684 	pg = alloc_priority_group();
685 	if (!pg) {
686 		ti->error = "couldn't allocate priority group";
687 		return ERR_PTR(-ENOMEM);
688 	}
689 	pg->m = m;
690 
691 	r = parse_path_selector(as, pg, ti);
692 	if (r)
693 		goto bad;
694 
695 	/*
696 	 * read the paths
697 	 */
698 	r = dm_read_arg(_args, as, &pg->nr_pgpaths, &ti->error);
699 	if (r)
700 		goto bad;
701 
702 	r = dm_read_arg(_args + 1, as, &nr_selector_args, &ti->error);
703 	if (r)
704 		goto bad;
705 
706 	nr_args = 1 + nr_selector_args;
707 	for (i = 0; i < pg->nr_pgpaths; i++) {
708 		struct pgpath *pgpath;
709 		struct dm_arg_set path_args;
710 
711 		if (as->argc < nr_args) {
712 			ti->error = "not enough path parameters";
713 			r = -EINVAL;
714 			goto bad;
715 		}
716 
717 		path_args.argc = nr_args;
718 		path_args.argv = as->argv;
719 
720 		pgpath = parse_path(&path_args, &pg->ps, ti);
721 		if (IS_ERR(pgpath)) {
722 			r = PTR_ERR(pgpath);
723 			goto bad;
724 		}
725 
726 		pgpath->pg = pg;
727 		list_add_tail(&pgpath->list, &pg->pgpaths);
728 		dm_consume_args(as, nr_args);
729 	}
730 
731 	return pg;
732 
733  bad:
734 	free_priority_group(pg, ti);
735 	return ERR_PTR(r);
736 }
737 
738 static int parse_hw_handler(struct dm_arg_set *as, struct multipath *m)
739 {
740 	unsigned hw_argc;
741 	int ret;
742 	struct dm_target *ti = m->ti;
743 
744 	static struct dm_arg _args[] = {
745 		{0, 1024, "invalid number of hardware handler args"},
746 	};
747 
748 	if (dm_read_arg_group(_args, as, &hw_argc, &ti->error))
749 		return -EINVAL;
750 
751 	if (!hw_argc)
752 		return 0;
753 
754 	m->hw_handler_name = kstrdup(dm_shift_arg(as), GFP_KERNEL);
755 
756 	if (hw_argc > 1) {
757 		char *p;
758 		int i, j, len = 4;
759 
760 		for (i = 0; i <= hw_argc - 2; i++)
761 			len += strlen(as->argv[i]) + 1;
762 		p = m->hw_handler_params = kzalloc(len, GFP_KERNEL);
763 		if (!p) {
764 			ti->error = "memory allocation failed";
765 			ret = -ENOMEM;
766 			goto fail;
767 		}
768 		j = sprintf(p, "%d", hw_argc - 1);
769 		for (i = 0, p+=j+1; i <= hw_argc - 2; i++, p+=j+1)
770 			j = sprintf(p, "%s", as->argv[i]);
771 	}
772 	dm_consume_args(as, hw_argc - 1);
773 
774 	return 0;
775 fail:
776 	kfree(m->hw_handler_name);
777 	m->hw_handler_name = NULL;
778 	return ret;
779 }
780 
781 static int parse_features(struct dm_arg_set *as, struct multipath *m)
782 {
783 	int r;
784 	unsigned argc;
785 	struct dm_target *ti = m->ti;
786 	const char *arg_name;
787 
788 	static struct dm_arg _args[] = {
789 		{0, 6, "invalid number of feature args"},
790 		{1, 50, "pg_init_retries must be between 1 and 50"},
791 		{0, 60000, "pg_init_delay_msecs must be between 0 and 60000"},
792 	};
793 
794 	r = dm_read_arg_group(_args, as, &argc, &ti->error);
795 	if (r)
796 		return -EINVAL;
797 
798 	if (!argc)
799 		return 0;
800 
801 	do {
802 		arg_name = dm_shift_arg(as);
803 		argc--;
804 
805 		if (!strcasecmp(arg_name, "queue_if_no_path")) {
806 			r = queue_if_no_path(m, true, false);
807 			continue;
808 		}
809 
810 		if (!strcasecmp(arg_name, "retain_attached_hw_handler")) {
811 			m->retain_attached_hw_handler = true;
812 			continue;
813 		}
814 
815 		if (!strcasecmp(arg_name, "pg_init_retries") &&
816 		    (argc >= 1)) {
817 			r = dm_read_arg(_args + 1, as, &m->pg_init_retries, &ti->error);
818 			argc--;
819 			continue;
820 		}
821 
822 		if (!strcasecmp(arg_name, "pg_init_delay_msecs") &&
823 		    (argc >= 1)) {
824 			r = dm_read_arg(_args + 2, as, &m->pg_init_delay_msecs, &ti->error);
825 			argc--;
826 			continue;
827 		}
828 
829 		ti->error = "Unrecognised multipath feature request";
830 		r = -EINVAL;
831 	} while (argc && !r);
832 
833 	return r;
834 }
835 
836 static int multipath_ctr(struct dm_target *ti, unsigned int argc,
837 			 char **argv)
838 {
839 	/* target arguments */
840 	static struct dm_arg _args[] = {
841 		{0, 1024, "invalid number of priority groups"},
842 		{0, 1024, "invalid initial priority group number"},
843 	};
844 
845 	int r;
846 	struct multipath *m;
847 	struct dm_arg_set as;
848 	unsigned pg_count = 0;
849 	unsigned next_pg_num;
850 	bool use_blk_mq = dm_use_blk_mq(dm_table_get_md(ti->table));
851 
852 	as.argc = argc;
853 	as.argv = argv;
854 
855 	m = alloc_multipath(ti, use_blk_mq);
856 	if (!m) {
857 		ti->error = "can't allocate multipath";
858 		return -EINVAL;
859 	}
860 
861 	r = parse_features(&as, m);
862 	if (r)
863 		goto bad;
864 
865 	r = parse_hw_handler(&as, m);
866 	if (r)
867 		goto bad;
868 
869 	r = dm_read_arg(_args, &as, &m->nr_priority_groups, &ti->error);
870 	if (r)
871 		goto bad;
872 
873 	r = dm_read_arg(_args + 1, &as, &next_pg_num, &ti->error);
874 	if (r)
875 		goto bad;
876 
877 	if ((!m->nr_priority_groups && next_pg_num) ||
878 	    (m->nr_priority_groups && !next_pg_num)) {
879 		ti->error = "invalid initial priority group";
880 		r = -EINVAL;
881 		goto bad;
882 	}
883 
884 	/* parse the priority groups */
885 	while (as.argc) {
886 		struct priority_group *pg;
887 
888 		pg = parse_priority_group(&as, m);
889 		if (IS_ERR(pg)) {
890 			r = PTR_ERR(pg);
891 			goto bad;
892 		}
893 
894 		m->nr_valid_paths += pg->nr_pgpaths;
895 		list_add_tail(&pg->list, &m->priority_groups);
896 		pg_count++;
897 		pg->pg_num = pg_count;
898 		if (!--next_pg_num)
899 			m->next_pg = pg;
900 	}
901 
902 	if (pg_count != m->nr_priority_groups) {
903 		ti->error = "priority group count mismatch";
904 		r = -EINVAL;
905 		goto bad;
906 	}
907 
908 	ti->num_flush_bios = 1;
909 	ti->num_discard_bios = 1;
910 	ti->num_write_same_bios = 1;
911 	if (use_blk_mq)
912 		ti->per_io_data_size = sizeof(struct dm_mpath_io);
913 
914 	return 0;
915 
916  bad:
917 	free_multipath(m);
918 	return r;
919 }
920 
921 static void multipath_wait_for_pg_init_completion(struct multipath *m)
922 {
923 	DECLARE_WAITQUEUE(wait, current);
924 	unsigned long flags;
925 
926 	add_wait_queue(&m->pg_init_wait, &wait);
927 
928 	while (1) {
929 		set_current_state(TASK_UNINTERRUPTIBLE);
930 
931 		spin_lock_irqsave(&m->lock, flags);
932 		if (!m->pg_init_in_progress) {
933 			spin_unlock_irqrestore(&m->lock, flags);
934 			break;
935 		}
936 		spin_unlock_irqrestore(&m->lock, flags);
937 
938 		io_schedule();
939 	}
940 	set_current_state(TASK_RUNNING);
941 
942 	remove_wait_queue(&m->pg_init_wait, &wait);
943 }
944 
945 static void flush_multipath_work(struct multipath *m)
946 {
947 	unsigned long flags;
948 
949 	spin_lock_irqsave(&m->lock, flags);
950 	m->pg_init_disabled = true;
951 	spin_unlock_irqrestore(&m->lock, flags);
952 
953 	flush_workqueue(kmpath_handlerd);
954 	multipath_wait_for_pg_init_completion(m);
955 	flush_workqueue(kmultipathd);
956 	flush_work(&m->trigger_event);
957 
958 	spin_lock_irqsave(&m->lock, flags);
959 	m->pg_init_disabled = false;
960 	spin_unlock_irqrestore(&m->lock, flags);
961 }
962 
963 static void multipath_dtr(struct dm_target *ti)
964 {
965 	struct multipath *m = ti->private;
966 
967 	flush_multipath_work(m);
968 	free_multipath(m);
969 }
970 
971 /*
972  * Take a path out of use.
973  */
974 static int fail_path(struct pgpath *pgpath)
975 {
976 	unsigned long flags;
977 	struct multipath *m = pgpath->pg->m;
978 
979 	spin_lock_irqsave(&m->lock, flags);
980 
981 	if (!pgpath->is_active)
982 		goto out;
983 
984 	DMWARN("Failing path %s.", pgpath->path.dev->name);
985 
986 	pgpath->pg->ps.type->fail_path(&pgpath->pg->ps, &pgpath->path);
987 	pgpath->is_active = false;
988 	pgpath->fail_count++;
989 
990 	m->nr_valid_paths--;
991 
992 	if (pgpath == m->current_pgpath)
993 		m->current_pgpath = NULL;
994 
995 	dm_path_uevent(DM_UEVENT_PATH_FAILED, m->ti,
996 		      pgpath->path.dev->name, m->nr_valid_paths);
997 
998 	schedule_work(&m->trigger_event);
999 
1000 out:
1001 	spin_unlock_irqrestore(&m->lock, flags);
1002 
1003 	return 0;
1004 }
1005 
1006 /*
1007  * Reinstate a previously-failed path
1008  */
1009 static int reinstate_path(struct pgpath *pgpath)
1010 {
1011 	int r = 0, run_queue = 0;
1012 	unsigned long flags;
1013 	struct multipath *m = pgpath->pg->m;
1014 
1015 	spin_lock_irqsave(&m->lock, flags);
1016 
1017 	if (pgpath->is_active)
1018 		goto out;
1019 
1020 	DMWARN("Reinstating path %s.", pgpath->path.dev->name);
1021 
1022 	r = pgpath->pg->ps.type->reinstate_path(&pgpath->pg->ps, &pgpath->path);
1023 	if (r)
1024 		goto out;
1025 
1026 	pgpath->is_active = true;
1027 
1028 	if (!m->nr_valid_paths++) {
1029 		m->current_pgpath = NULL;
1030 		run_queue = 1;
1031 	} else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) {
1032 		if (queue_work(kmpath_handlerd, &pgpath->activate_path.work))
1033 			m->pg_init_in_progress++;
1034 	}
1035 
1036 	dm_path_uevent(DM_UEVENT_PATH_REINSTATED, m->ti,
1037 		      pgpath->path.dev->name, m->nr_valid_paths);
1038 
1039 	schedule_work(&m->trigger_event);
1040 
1041 out:
1042 	spin_unlock_irqrestore(&m->lock, flags);
1043 	if (run_queue)
1044 		dm_table_run_md_queue_async(m->ti->table);
1045 
1046 	return r;
1047 }
1048 
1049 /*
1050  * Fail or reinstate all paths that match the provided struct dm_dev.
1051  */
1052 static int action_dev(struct multipath *m, struct dm_dev *dev,
1053 		      action_fn action)
1054 {
1055 	int r = -EINVAL;
1056 	struct pgpath *pgpath;
1057 	struct priority_group *pg;
1058 
1059 	list_for_each_entry(pg, &m->priority_groups, list) {
1060 		list_for_each_entry(pgpath, &pg->pgpaths, list) {
1061 			if (pgpath->path.dev == dev)
1062 				r = action(pgpath);
1063 		}
1064 	}
1065 
1066 	return r;
1067 }
1068 
1069 /*
1070  * Temporarily try to avoid having to use the specified PG
1071  */
1072 static void bypass_pg(struct multipath *m, struct priority_group *pg,
1073 		      bool bypassed)
1074 {
1075 	unsigned long flags;
1076 
1077 	spin_lock_irqsave(&m->lock, flags);
1078 
1079 	pg->bypassed = bypassed;
1080 	m->current_pgpath = NULL;
1081 	m->current_pg = NULL;
1082 
1083 	spin_unlock_irqrestore(&m->lock, flags);
1084 
1085 	schedule_work(&m->trigger_event);
1086 }
1087 
1088 /*
1089  * Switch to using the specified PG from the next I/O that gets mapped
1090  */
1091 static int switch_pg_num(struct multipath *m, const char *pgstr)
1092 {
1093 	struct priority_group *pg;
1094 	unsigned pgnum;
1095 	unsigned long flags;
1096 	char dummy;
1097 
1098 	if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum ||
1099 	    (pgnum > m->nr_priority_groups)) {
1100 		DMWARN("invalid PG number supplied to switch_pg_num");
1101 		return -EINVAL;
1102 	}
1103 
1104 	spin_lock_irqsave(&m->lock, flags);
1105 	list_for_each_entry(pg, &m->priority_groups, list) {
1106 		pg->bypassed = false;
1107 		if (--pgnum)
1108 			continue;
1109 
1110 		m->current_pgpath = NULL;
1111 		m->current_pg = NULL;
1112 		m->next_pg = pg;
1113 	}
1114 	spin_unlock_irqrestore(&m->lock, flags);
1115 
1116 	schedule_work(&m->trigger_event);
1117 	return 0;
1118 }
1119 
1120 /*
1121  * Set/clear bypassed status of a PG.
1122  * PGs are numbered upwards from 1 in the order they were declared.
1123  */
1124 static int bypass_pg_num(struct multipath *m, const char *pgstr, bool bypassed)
1125 {
1126 	struct priority_group *pg;
1127 	unsigned pgnum;
1128 	char dummy;
1129 
1130 	if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum ||
1131 	    (pgnum > m->nr_priority_groups)) {
1132 		DMWARN("invalid PG number supplied to bypass_pg");
1133 		return -EINVAL;
1134 	}
1135 
1136 	list_for_each_entry(pg, &m->priority_groups, list) {
1137 		if (!--pgnum)
1138 			break;
1139 	}
1140 
1141 	bypass_pg(m, pg, bypassed);
1142 	return 0;
1143 }
1144 
1145 /*
1146  * Should we retry pg_init immediately?
1147  */
1148 static bool pg_init_limit_reached(struct multipath *m, struct pgpath *pgpath)
1149 {
1150 	unsigned long flags;
1151 	bool limit_reached = false;
1152 
1153 	spin_lock_irqsave(&m->lock, flags);
1154 
1155 	if (m->pg_init_count <= m->pg_init_retries && !m->pg_init_disabled)
1156 		m->pg_init_required = true;
1157 	else
1158 		limit_reached = true;
1159 
1160 	spin_unlock_irqrestore(&m->lock, flags);
1161 
1162 	return limit_reached;
1163 }
1164 
1165 static void pg_init_done(void *data, int errors)
1166 {
1167 	struct pgpath *pgpath = data;
1168 	struct priority_group *pg = pgpath->pg;
1169 	struct multipath *m = pg->m;
1170 	unsigned long flags;
1171 	bool delay_retry = false;
1172 
1173 	/* device or driver problems */
1174 	switch (errors) {
1175 	case SCSI_DH_OK:
1176 		break;
1177 	case SCSI_DH_NOSYS:
1178 		if (!m->hw_handler_name) {
1179 			errors = 0;
1180 			break;
1181 		}
1182 		DMERR("Could not failover the device: Handler scsi_dh_%s "
1183 		      "Error %d.", m->hw_handler_name, errors);
1184 		/*
1185 		 * Fail path for now, so we do not ping pong
1186 		 */
1187 		fail_path(pgpath);
1188 		break;
1189 	case SCSI_DH_DEV_TEMP_BUSY:
1190 		/*
1191 		 * Probably doing something like FW upgrade on the
1192 		 * controller so try the other pg.
1193 		 */
1194 		bypass_pg(m, pg, true);
1195 		break;
1196 	case SCSI_DH_RETRY:
1197 		/* Wait before retrying. */
1198 		delay_retry = 1;
1199 	case SCSI_DH_IMM_RETRY:
1200 	case SCSI_DH_RES_TEMP_UNAVAIL:
1201 		if (pg_init_limit_reached(m, pgpath))
1202 			fail_path(pgpath);
1203 		errors = 0;
1204 		break;
1205 	case SCSI_DH_DEV_OFFLINED:
1206 	default:
1207 		/*
1208 		 * We probably do not want to fail the path for a device
1209 		 * error, but this is what the old dm did. In future
1210 		 * patches we can do more advanced handling.
1211 		 */
1212 		fail_path(pgpath);
1213 	}
1214 
1215 	spin_lock_irqsave(&m->lock, flags);
1216 	if (errors) {
1217 		if (pgpath == m->current_pgpath) {
1218 			DMERR("Could not failover device. Error %d.", errors);
1219 			m->current_pgpath = NULL;
1220 			m->current_pg = NULL;
1221 		}
1222 	} else if (!m->pg_init_required)
1223 		pg->bypassed = false;
1224 
1225 	if (--m->pg_init_in_progress)
1226 		/* Activations of other paths are still on going */
1227 		goto out;
1228 
1229 	if (m->pg_init_required) {
1230 		m->pg_init_delay_retry = delay_retry;
1231 		if (__pg_init_all_paths(m))
1232 			goto out;
1233 	}
1234 	m->queue_io = false;
1235 
1236 	/*
1237 	 * Wake up any thread waiting to suspend.
1238 	 */
1239 	wake_up(&m->pg_init_wait);
1240 
1241 out:
1242 	spin_unlock_irqrestore(&m->lock, flags);
1243 }
1244 
1245 static void activate_path(struct work_struct *work)
1246 {
1247 	struct pgpath *pgpath =
1248 		container_of(work, struct pgpath, activate_path.work);
1249 
1250 	if (pgpath->is_active)
1251 		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
1252 				 pg_init_done, pgpath);
1253 	else
1254 		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);
1255 }
1256 
1257 static int noretry_error(int error)
1258 {
1259 	switch (error) {
1260 	case -EOPNOTSUPP:
1261 	case -EREMOTEIO:
1262 	case -EILSEQ:
1263 	case -ENODATA:
1264 	case -ENOSPC:
1265 		return 1;
1266 	}
1267 
1268 	/* Anything else could be a path failure, so should be retried */
1269 	return 0;
1270 }
1271 
1272 /*
1273  * end_io handling
1274  */
1275 static int do_end_io(struct multipath *m, struct request *clone,
1276 		     int error, struct dm_mpath_io *mpio)
1277 {
1278 	/*
1279 	 * We don't queue any clone request inside the multipath target
1280 	 * during end I/O handling, since those clone requests don't have
1281 	 * bio clones.  If we queue them inside the multipath target,
1282 	 * we need to make bio clones, that requires memory allocation.
1283 	 * (See drivers/md/dm.c:end_clone_bio() about why the clone requests
1284 	 *  don't have bio clones.)
1285 	 * Instead of queueing the clone request here, we queue the original
1286 	 * request into dm core, which will remake a clone request and
1287 	 * clone bios for it and resubmit it later.
1288 	 */
1289 	int r = DM_ENDIO_REQUEUE;
1290 	unsigned long flags;
1291 
1292 	if (!error && !clone->errors)
1293 		return 0;	/* I/O complete */
1294 
1295 	if (noretry_error(error))
1296 		return error;
1297 
1298 	if (mpio->pgpath)
1299 		fail_path(mpio->pgpath);
1300 
1301 	spin_lock_irqsave(&m->lock, flags);
1302 	if (!m->nr_valid_paths) {
1303 		if (!m->queue_if_no_path) {
1304 			if (!__must_push_back(m))
1305 				r = -EIO;
1306 		} else {
1307 			if (error == -EBADE)
1308 				r = error;
1309 		}
1310 	}
1311 	spin_unlock_irqrestore(&m->lock, flags);
1312 
1313 	return r;
1314 }
1315 
1316 static int multipath_end_io(struct dm_target *ti, struct request *clone,
1317 			    int error, union map_info *map_context)
1318 {
1319 	struct multipath *m = ti->private;
1320 	struct dm_mpath_io *mpio = get_mpio(map_context);
1321 	struct pgpath *pgpath;
1322 	struct path_selector *ps;
1323 	int r;
1324 
1325 	BUG_ON(!mpio);
1326 
1327 	r = do_end_io(m, clone, error, mpio);
1328 	pgpath = mpio->pgpath;
1329 	if (pgpath) {
1330 		ps = &pgpath->pg->ps;
1331 		if (ps->type->end_io)
1332 			ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes);
1333 	}
1334 	clear_request_fn_mpio(m, map_context);
1335 
1336 	return r;
1337 }
1338 
1339 /*
1340  * Suspend can't complete until all the I/O is processed so if
1341  * the last path fails we must error any remaining I/O.
1342  * Note that if the freeze_bdev fails while suspending, the
1343  * queue_if_no_path state is lost - userspace should reset it.
1344  */
1345 static void multipath_presuspend(struct dm_target *ti)
1346 {
1347 	struct multipath *m = ti->private;
1348 
1349 	queue_if_no_path(m, false, true);
1350 }
1351 
1352 static void multipath_postsuspend(struct dm_target *ti)
1353 {
1354 	struct multipath *m = ti->private;
1355 
1356 	mutex_lock(&m->work_mutex);
1357 	flush_multipath_work(m);
1358 	mutex_unlock(&m->work_mutex);
1359 }
1360 
1361 /*
1362  * Restore the queue_if_no_path setting.
1363  */
1364 static void multipath_resume(struct dm_target *ti)
1365 {
1366 	struct multipath *m = ti->private;
1367 	unsigned long flags;
1368 
1369 	spin_lock_irqsave(&m->lock, flags);
1370 	m->queue_if_no_path = m->saved_queue_if_no_path;
1371 	spin_unlock_irqrestore(&m->lock, flags);
1372 }
1373 
1374 /*
1375  * Info output has the following format:
1376  * num_multipath_feature_args [multipath_feature_args]*
1377  * num_handler_status_args [handler_status_args]*
1378  * num_groups init_group_number
1379  *            [A|D|E num_ps_status_args [ps_status_args]*
1380  *             num_paths num_selector_args
1381  *             [path_dev A|F fail_count [selector_args]* ]+ ]+
1382  *
1383  * Table output has the following format (identical to the constructor string):
1384  * num_feature_args [features_args]*
1385  * num_handler_args hw_handler [hw_handler_args]*
1386  * num_groups init_group_number
1387  *     [priority selector-name num_ps_args [ps_args]*
1388  *      num_paths num_selector_args [path_dev [selector_args]* ]+ ]+
1389  */
1390 static void multipath_status(struct dm_target *ti, status_type_t type,
1391 			     unsigned status_flags, char *result, unsigned maxlen)
1392 {
1393 	int sz = 0;
1394 	unsigned long flags;
1395 	struct multipath *m = ti->private;
1396 	struct priority_group *pg;
1397 	struct pgpath *p;
1398 	unsigned pg_num;
1399 	char state;
1400 
1401 	spin_lock_irqsave(&m->lock, flags);
1402 
1403 	/* Features */
1404 	if (type == STATUSTYPE_INFO)
1405 		DMEMIT("2 %u %u ", m->queue_io, m->pg_init_count);
1406 	else {
1407 		DMEMIT("%u ", m->queue_if_no_path +
1408 			      (m->pg_init_retries > 0) * 2 +
1409 			      (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) * 2 +
1410 			      m->retain_attached_hw_handler);
1411 		if (m->queue_if_no_path)
1412 			DMEMIT("queue_if_no_path ");
1413 		if (m->pg_init_retries)
1414 			DMEMIT("pg_init_retries %u ", m->pg_init_retries);
1415 		if (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT)
1416 			DMEMIT("pg_init_delay_msecs %u ", m->pg_init_delay_msecs);
1417 		if (m->retain_attached_hw_handler)
1418 			DMEMIT("retain_attached_hw_handler ");
1419 	}
1420 
1421 	if (!m->hw_handler_name || type == STATUSTYPE_INFO)
1422 		DMEMIT("0 ");
1423 	else
1424 		DMEMIT("1 %s ", m->hw_handler_name);
1425 
1426 	DMEMIT("%u ", m->nr_priority_groups);
1427 
1428 	if (m->next_pg)
1429 		pg_num = m->next_pg->pg_num;
1430 	else if (m->current_pg)
1431 		pg_num = m->current_pg->pg_num;
1432 	else
1433 		pg_num = (m->nr_priority_groups ? 1 : 0);
1434 
1435 	DMEMIT("%u ", pg_num);
1436 
1437 	switch (type) {
1438 	case STATUSTYPE_INFO:
1439 		list_for_each_entry(pg, &m->priority_groups, list) {
1440 			if (pg->bypassed)
1441 				state = 'D';	/* Disabled */
1442 			else if (pg == m->current_pg)
1443 				state = 'A';	/* Currently Active */
1444 			else
1445 				state = 'E';	/* Enabled */
1446 
1447 			DMEMIT("%c ", state);
1448 
1449 			if (pg->ps.type->status)
1450 				sz += pg->ps.type->status(&pg->ps, NULL, type,
1451 							  result + sz,
1452 							  maxlen - sz);
1453 			else
1454 				DMEMIT("0 ");
1455 
1456 			DMEMIT("%u %u ", pg->nr_pgpaths,
1457 			       pg->ps.type->info_args);
1458 
1459 			list_for_each_entry(p, &pg->pgpaths, list) {
1460 				DMEMIT("%s %s %u ", p->path.dev->name,
1461 				       p->is_active ? "A" : "F",
1462 				       p->fail_count);
1463 				if (pg->ps.type->status)
1464 					sz += pg->ps.type->status(&pg->ps,
1465 					      &p->path, type, result + sz,
1466 					      maxlen - sz);
1467 			}
1468 		}
1469 		break;
1470 
1471 	case STATUSTYPE_TABLE:
1472 		list_for_each_entry(pg, &m->priority_groups, list) {
1473 			DMEMIT("%s ", pg->ps.type->name);
1474 
1475 			if (pg->ps.type->status)
1476 				sz += pg->ps.type->status(&pg->ps, NULL, type,
1477 							  result + sz,
1478 							  maxlen - sz);
1479 			else
1480 				DMEMIT("0 ");
1481 
1482 			DMEMIT("%u %u ", pg->nr_pgpaths,
1483 			       pg->ps.type->table_args);
1484 
1485 			list_for_each_entry(p, &pg->pgpaths, list) {
1486 				DMEMIT("%s ", p->path.dev->name);
1487 				if (pg->ps.type->status)
1488 					sz += pg->ps.type->status(&pg->ps,
1489 					      &p->path, type, result + sz,
1490 					      maxlen - sz);
1491 			}
1492 		}
1493 		break;
1494 	}
1495 
1496 	spin_unlock_irqrestore(&m->lock, flags);
1497 }
1498 
1499 static int multipath_message(struct dm_target *ti, unsigned argc, char **argv)
1500 {
1501 	int r = -EINVAL;
1502 	struct dm_dev *dev;
1503 	struct multipath *m = ti->private;
1504 	action_fn action;
1505 
1506 	mutex_lock(&m->work_mutex);
1507 
1508 	if (dm_suspended(ti)) {
1509 		r = -EBUSY;
1510 		goto out;
1511 	}
1512 
1513 	if (argc == 1) {
1514 		if (!strcasecmp(argv[0], "queue_if_no_path")) {
1515 			r = queue_if_no_path(m, true, false);
1516 			goto out;
1517 		} else if (!strcasecmp(argv[0], "fail_if_no_path")) {
1518 			r = queue_if_no_path(m, false, false);
1519 			goto out;
1520 		}
1521 	}
1522 
1523 	if (argc != 2) {
1524 		DMWARN("Invalid multipath message arguments. Expected 2 arguments, got %d.", argc);
1525 		goto out;
1526 	}
1527 
1528 	if (!strcasecmp(argv[0], "disable_group")) {
1529 		r = bypass_pg_num(m, argv[1], true);
1530 		goto out;
1531 	} else if (!strcasecmp(argv[0], "enable_group")) {
1532 		r = bypass_pg_num(m, argv[1], false);
1533 		goto out;
1534 	} else if (!strcasecmp(argv[0], "switch_group")) {
1535 		r = switch_pg_num(m, argv[1]);
1536 		goto out;
1537 	} else if (!strcasecmp(argv[0], "reinstate_path"))
1538 		action = reinstate_path;
1539 	else if (!strcasecmp(argv[0], "fail_path"))
1540 		action = fail_path;
1541 	else {
1542 		DMWARN("Unrecognised multipath message received: %s", argv[0]);
1543 		goto out;
1544 	}
1545 
1546 	r = dm_get_device(ti, argv[1], dm_table_get_mode(ti->table), &dev);
1547 	if (r) {
1548 		DMWARN("message: error getting device %s",
1549 		       argv[1]);
1550 		goto out;
1551 	}
1552 
1553 	r = action_dev(m, dev, action);
1554 
1555 	dm_put_device(ti, dev);
1556 
1557 out:
1558 	mutex_unlock(&m->work_mutex);
1559 	return r;
1560 }
1561 
1562 static int multipath_prepare_ioctl(struct dm_target *ti,
1563 		struct block_device **bdev, fmode_t *mode)
1564 {
1565 	struct multipath *m = ti->private;
1566 	unsigned long flags;
1567 	int r;
1568 
1569 	spin_lock_irqsave(&m->lock, flags);
1570 
1571 	if (!m->current_pgpath)
1572 		__choose_pgpath(m, 0);
1573 
1574 	if (m->current_pgpath) {
1575 		if (!m->queue_io) {
1576 			*bdev = m->current_pgpath->path.dev->bdev;
1577 			*mode = m->current_pgpath->path.dev->mode;
1578 			r = 0;
1579 		} else {
1580 			/* pg_init has not started or completed */
1581 			r = -ENOTCONN;
1582 		}
1583 	} else {
1584 		/* No path is available */
1585 		if (m->queue_if_no_path)
1586 			r = -ENOTCONN;
1587 		else
1588 			r = -EIO;
1589 	}
1590 
1591 	spin_unlock_irqrestore(&m->lock, flags);
1592 
1593 	if (r == -ENOTCONN) {
1594 		spin_lock_irqsave(&m->lock, flags);
1595 		if (!m->current_pg) {
1596 			/* Path status changed, redo selection */
1597 			__choose_pgpath(m, 0);
1598 		}
1599 		if (m->pg_init_required)
1600 			__pg_init_all_paths(m);
1601 		spin_unlock_irqrestore(&m->lock, flags);
1602 		dm_table_run_md_queue_async(m->ti->table);
1603 	}
1604 
1605 	/*
1606 	 * Only pass ioctls through if the device sizes match exactly.
1607 	 */
1608 	if (!r && ti->len != i_size_read((*bdev)->bd_inode) >> SECTOR_SHIFT)
1609 		return 1;
1610 	return r;
1611 }
1612 
1613 static int multipath_iterate_devices(struct dm_target *ti,
1614 				     iterate_devices_callout_fn fn, void *data)
1615 {
1616 	struct multipath *m = ti->private;
1617 	struct priority_group *pg;
1618 	struct pgpath *p;
1619 	int ret = 0;
1620 
1621 	list_for_each_entry(pg, &m->priority_groups, list) {
1622 		list_for_each_entry(p, &pg->pgpaths, list) {
1623 			ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
1624 			if (ret)
1625 				goto out;
1626 		}
1627 	}
1628 
1629 out:
1630 	return ret;
1631 }
1632 
1633 static int pgpath_busy(struct pgpath *pgpath)
1634 {
1635 	struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev);
1636 
1637 	return blk_lld_busy(q);
1638 }
1639 
1640 /*
1641  * We return "busy", only when we can map I/Os but underlying devices
1642  * are busy (so even if we map I/Os now, the I/Os will wait on
1643  * the underlying queue).
1644  * In other words, if we want to kill I/Os or queue them inside us
1645  * due to map unavailability, we don't return "busy".  Otherwise,
1646  * dm core won't give us the I/Os and we can't do what we want.
1647  */
1648 static int multipath_busy(struct dm_target *ti)
1649 {
1650 	bool busy = false, has_active = false;
1651 	struct multipath *m = ti->private;
1652 	struct priority_group *pg;
1653 	struct pgpath *pgpath;
1654 	unsigned long flags;
1655 
1656 	spin_lock_irqsave(&m->lock, flags);
1657 
1658 	/* pg_init in progress or no paths available */
1659 	if (m->pg_init_in_progress ||
1660 	    (!m->nr_valid_paths && m->queue_if_no_path)) {
1661 		busy = true;
1662 		goto out;
1663 	}
1664 	/* Guess which priority_group will be used at next mapping time */
1665 	if (unlikely(!m->current_pgpath && m->next_pg))
1666 		pg = m->next_pg;
1667 	else if (likely(m->current_pg))
1668 		pg = m->current_pg;
1669 	else
1670 		/*
1671 		 * We don't know which pg will be used at next mapping time.
1672 		 * We don't call __choose_pgpath() here to avoid to trigger
1673 		 * pg_init just by busy checking.
1674 		 * So we don't know whether underlying devices we will be using
1675 		 * at next mapping time are busy or not. Just try mapping.
1676 		 */
1677 		goto out;
1678 
1679 	/*
1680 	 * If there is one non-busy active path at least, the path selector
1681 	 * will be able to select it. So we consider such a pg as not busy.
1682 	 */
1683 	busy = true;
1684 	list_for_each_entry(pgpath, &pg->pgpaths, list)
1685 		if (pgpath->is_active) {
1686 			has_active = true;
1687 			if (!pgpath_busy(pgpath)) {
1688 				busy = false;
1689 				break;
1690 			}
1691 		}
1692 
1693 	if (!has_active)
1694 		/*
1695 		 * No active path in this pg, so this pg won't be used and
1696 		 * the current_pg will be changed at next mapping time.
1697 		 * We need to try mapping to determine it.
1698 		 */
1699 		busy = false;
1700 
1701 out:
1702 	spin_unlock_irqrestore(&m->lock, flags);
1703 
1704 	return busy;
1705 }
1706 
1707 /*-----------------------------------------------------------------
1708  * Module setup
1709  *---------------------------------------------------------------*/
1710 static struct target_type multipath_target = {
1711 	.name = "multipath",
1712 	.version = {1, 11, 0},
1713 	.features = DM_TARGET_SINGLETON | DM_TARGET_IMMUTABLE,
1714 	.module = THIS_MODULE,
1715 	.ctr = multipath_ctr,
1716 	.dtr = multipath_dtr,
1717 	.map_rq = multipath_map,
1718 	.clone_and_map_rq = multipath_clone_and_map,
1719 	.release_clone_rq = multipath_release_clone,
1720 	.rq_end_io = multipath_end_io,
1721 	.presuspend = multipath_presuspend,
1722 	.postsuspend = multipath_postsuspend,
1723 	.resume = multipath_resume,
1724 	.status = multipath_status,
1725 	.message = multipath_message,
1726 	.prepare_ioctl = multipath_prepare_ioctl,
1727 	.iterate_devices = multipath_iterate_devices,
1728 	.busy = multipath_busy,
1729 };
1730 
1731 static int __init dm_multipath_init(void)
1732 {
1733 	int r;
1734 
1735 	/* allocate a slab for the dm_ios */
1736 	_mpio_cache = KMEM_CACHE(dm_mpath_io, 0);
1737 	if (!_mpio_cache)
1738 		return -ENOMEM;
1739 
1740 	r = dm_register_target(&multipath_target);
1741 	if (r < 0) {
1742 		DMERR("register failed %d", r);
1743 		r = -EINVAL;
1744 		goto bad_register_target;
1745 	}
1746 
1747 	kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0);
1748 	if (!kmultipathd) {
1749 		DMERR("failed to create workqueue kmpathd");
1750 		r = -ENOMEM;
1751 		goto bad_alloc_kmultipathd;
1752 	}
1753 
1754 	/*
1755 	 * A separate workqueue is used to handle the device handlers
1756 	 * to avoid overloading existing workqueue. Overloading the
1757 	 * old workqueue would also create a bottleneck in the
1758 	 * path of the storage hardware device activation.
1759 	 */
1760 	kmpath_handlerd = alloc_ordered_workqueue("kmpath_handlerd",
1761 						  WQ_MEM_RECLAIM);
1762 	if (!kmpath_handlerd) {
1763 		DMERR("failed to create workqueue kmpath_handlerd");
1764 		r = -ENOMEM;
1765 		goto bad_alloc_kmpath_handlerd;
1766 	}
1767 
1768 	DMINFO("version %u.%u.%u loaded",
1769 	       multipath_target.version[0], multipath_target.version[1],
1770 	       multipath_target.version[2]);
1771 
1772 	return 0;
1773 
1774 bad_alloc_kmpath_handlerd:
1775 	destroy_workqueue(kmultipathd);
1776 bad_alloc_kmultipathd:
1777 	dm_unregister_target(&multipath_target);
1778 bad_register_target:
1779 	kmem_cache_destroy(_mpio_cache);
1780 
1781 	return r;
1782 }
1783 
1784 static void __exit dm_multipath_exit(void)
1785 {
1786 	destroy_workqueue(kmpath_handlerd);
1787 	destroy_workqueue(kmultipathd);
1788 
1789 	dm_unregister_target(&multipath_target);
1790 	kmem_cache_destroy(_mpio_cache);
1791 }
1792 
1793 module_init(dm_multipath_init);
1794 module_exit(dm_multipath_exit);
1795 
1796 MODULE_DESCRIPTION(DM_NAME " multipath target");
1797 MODULE_AUTHOR("Sistina Software <dm-devel@redhat.com>");
1798 MODULE_LICENSE("GPL");
1799