xref: /openbmc/linux/drivers/md/dm-mpath.c (revision 23c2b932)
1 /*
2  * Copyright (C) 2003 Sistina Software Limited.
3  * Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved.
4  *
5  * This file is released under the GPL.
6  */
7 
8 #include <linux/device-mapper.h>
9 
10 #include "dm.h"
11 #include "dm-path-selector.h"
12 #include "dm-uevent.h"
13 
14 #include <linux/blkdev.h>
15 #include <linux/ctype.h>
16 #include <linux/init.h>
17 #include <linux/mempool.h>
18 #include <linux/module.h>
19 #include <linux/pagemap.h>
20 #include <linux/slab.h>
21 #include <linux/time.h>
22 #include <linux/workqueue.h>
23 #include <linux/delay.h>
24 #include <scsi/scsi_dh.h>
25 #include <linux/atomic.h>
26 #include <linux/blk-mq.h>
27 
28 #define DM_MSG_PREFIX "multipath"
29 #define DM_PG_INIT_DELAY_MSECS 2000
30 #define DM_PG_INIT_DELAY_DEFAULT ((unsigned) -1)
31 
32 /* Path properties */
33 struct pgpath {
34 	struct list_head list;
35 
36 	struct priority_group *pg;	/* Owning PG */
37 	unsigned fail_count;		/* Cumulative failure count */
38 
39 	struct dm_path path;
40 	struct delayed_work activate_path;
41 
42 	bool is_active:1;		/* Path status */
43 };
44 
45 #define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path)
46 
47 /*
48  * Paths are grouped into Priority Groups and numbered from 1 upwards.
49  * Each has a path selector which controls which path gets used.
50  */
51 struct priority_group {
52 	struct list_head list;
53 
54 	struct multipath *m;		/* Owning multipath instance */
55 	struct path_selector ps;
56 
57 	unsigned pg_num;		/* Reference number */
58 	unsigned nr_pgpaths;		/* Number of paths in PG */
59 	struct list_head pgpaths;
60 
61 	bool bypassed:1;		/* Temporarily bypass this PG? */
62 };
63 
64 /* Multipath context */
65 struct multipath {
66 	struct list_head list;
67 	struct dm_target *ti;
68 
69 	const char *hw_handler_name;
70 	char *hw_handler_params;
71 
72 	spinlock_t lock;
73 
74 	unsigned nr_priority_groups;
75 	struct list_head priority_groups;
76 
77 	wait_queue_head_t pg_init_wait;	/* Wait for pg_init completion */
78 
79 	struct pgpath *current_pgpath;
80 	struct priority_group *current_pg;
81 	struct priority_group *next_pg;	/* Switch to this PG if set */
82 
83 	unsigned long flags;		/* Multipath state flags */
84 
85 	unsigned pg_init_retries;	/* Number of times to retry pg_init */
86 	unsigned pg_init_delay_msecs;	/* Number of msecs before pg_init retry */
87 
88 	atomic_t nr_valid_paths;	/* Total number of usable paths */
89 	atomic_t pg_init_in_progress;	/* Only one pg_init allowed at once */
90 	atomic_t pg_init_count;		/* Number of times pg_init called */
91 
92 	/*
93 	 * We must use a mempool of dm_mpath_io structs so that we
94 	 * can resubmit bios on error.
95 	 */
96 	mempool_t *mpio_pool;
97 
98 	struct mutex work_mutex;
99 	struct work_struct trigger_event;
100 };
101 
102 /*
103  * Context information attached to each bio we process.
104  */
105 struct dm_mpath_io {
106 	struct pgpath *pgpath;
107 	size_t nr_bytes;
108 };
109 
110 typedef int (*action_fn) (struct pgpath *pgpath);
111 
112 static struct kmem_cache *_mpio_cache;
113 
114 static struct workqueue_struct *kmultipathd, *kmpath_handlerd;
115 static void trigger_event(struct work_struct *work);
116 static void activate_path(struct work_struct *work);
117 
118 /*-----------------------------------------------
119  * Multipath state flags.
120  *-----------------------------------------------*/
121 
122 #define MPATHF_QUEUE_IO 0			/* Must we queue all I/O? */
123 #define MPATHF_QUEUE_IF_NO_PATH 1		/* Queue I/O if last path fails? */
124 #define MPATHF_SAVED_QUEUE_IF_NO_PATH 2		/* Saved state during suspension */
125 #define MPATHF_RETAIN_ATTACHED_HW_HANDLER 3	/* If there's already a hw_handler present, don't change it. */
126 #define MPATHF_PG_INIT_DISABLED 4		/* pg_init is not currently allowed */
127 #define MPATHF_PG_INIT_REQUIRED 5		/* pg_init needs calling? */
128 #define MPATHF_PG_INIT_DELAY_RETRY 6		/* Delay pg_init retry? */
129 
130 /*-----------------------------------------------
131  * Allocation routines
132  *-----------------------------------------------*/
133 
134 static struct pgpath *alloc_pgpath(void)
135 {
136 	struct pgpath *pgpath = kzalloc(sizeof(*pgpath), GFP_KERNEL);
137 
138 	if (pgpath) {
139 		pgpath->is_active = true;
140 		INIT_DELAYED_WORK(&pgpath->activate_path, activate_path);
141 	}
142 
143 	return pgpath;
144 }
145 
146 static void free_pgpath(struct pgpath *pgpath)
147 {
148 	kfree(pgpath);
149 }
150 
151 static struct priority_group *alloc_priority_group(void)
152 {
153 	struct priority_group *pg;
154 
155 	pg = kzalloc(sizeof(*pg), GFP_KERNEL);
156 
157 	if (pg)
158 		INIT_LIST_HEAD(&pg->pgpaths);
159 
160 	return pg;
161 }
162 
163 static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti)
164 {
165 	struct pgpath *pgpath, *tmp;
166 
167 	list_for_each_entry_safe(pgpath, tmp, pgpaths, list) {
168 		list_del(&pgpath->list);
169 		dm_put_device(ti, pgpath->path.dev);
170 		free_pgpath(pgpath);
171 	}
172 }
173 
174 static void free_priority_group(struct priority_group *pg,
175 				struct dm_target *ti)
176 {
177 	struct path_selector *ps = &pg->ps;
178 
179 	if (ps->type) {
180 		ps->type->destroy(ps);
181 		dm_put_path_selector(ps->type);
182 	}
183 
184 	free_pgpaths(&pg->pgpaths, ti);
185 	kfree(pg);
186 }
187 
188 static struct multipath *alloc_multipath(struct dm_target *ti, bool use_blk_mq)
189 {
190 	struct multipath *m;
191 
192 	m = kzalloc(sizeof(*m), GFP_KERNEL);
193 	if (m) {
194 		INIT_LIST_HEAD(&m->priority_groups);
195 		spin_lock_init(&m->lock);
196 		set_bit(MPATHF_QUEUE_IO, &m->flags);
197 		atomic_set(&m->nr_valid_paths, 0);
198 		atomic_set(&m->pg_init_in_progress, 0);
199 		atomic_set(&m->pg_init_count, 0);
200 		m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT;
201 		INIT_WORK(&m->trigger_event, trigger_event);
202 		init_waitqueue_head(&m->pg_init_wait);
203 		mutex_init(&m->work_mutex);
204 
205 		m->mpio_pool = NULL;
206 		if (!use_blk_mq) {
207 			unsigned min_ios = dm_get_reserved_rq_based_ios();
208 
209 			m->mpio_pool = mempool_create_slab_pool(min_ios, _mpio_cache);
210 			if (!m->mpio_pool) {
211 				kfree(m);
212 				return NULL;
213 			}
214 		}
215 
216 		m->ti = ti;
217 		ti->private = m;
218 	}
219 
220 	return m;
221 }
222 
223 static void free_multipath(struct multipath *m)
224 {
225 	struct priority_group *pg, *tmp;
226 
227 	list_for_each_entry_safe(pg, tmp, &m->priority_groups, list) {
228 		list_del(&pg->list);
229 		free_priority_group(pg, m->ti);
230 	}
231 
232 	kfree(m->hw_handler_name);
233 	kfree(m->hw_handler_params);
234 	mempool_destroy(m->mpio_pool);
235 	kfree(m);
236 }
237 
238 static struct dm_mpath_io *get_mpio(union map_info *info)
239 {
240 	return info->ptr;
241 }
242 
243 static struct dm_mpath_io *set_mpio(struct multipath *m, union map_info *info)
244 {
245 	struct dm_mpath_io *mpio;
246 
247 	if (!m->mpio_pool) {
248 		/* Use blk-mq pdu memory requested via per_io_data_size */
249 		mpio = get_mpio(info);
250 		memset(mpio, 0, sizeof(*mpio));
251 		return mpio;
252 	}
253 
254 	mpio = mempool_alloc(m->mpio_pool, GFP_ATOMIC);
255 	if (!mpio)
256 		return NULL;
257 
258 	memset(mpio, 0, sizeof(*mpio));
259 	info->ptr = mpio;
260 
261 	return mpio;
262 }
263 
264 static void clear_request_fn_mpio(struct multipath *m, union map_info *info)
265 {
266 	/* Only needed for non blk-mq (.request_fn) multipath */
267 	if (m->mpio_pool) {
268 		struct dm_mpath_io *mpio = info->ptr;
269 
270 		info->ptr = NULL;
271 		mempool_free(mpio, m->mpio_pool);
272 	}
273 }
274 
275 /*-----------------------------------------------
276  * Path selection
277  *-----------------------------------------------*/
278 
279 static int __pg_init_all_paths(struct multipath *m)
280 {
281 	struct pgpath *pgpath;
282 	unsigned long pg_init_delay = 0;
283 
284 	if (atomic_read(&m->pg_init_in_progress) || test_bit(MPATHF_PG_INIT_DISABLED, &m->flags))
285 		return 0;
286 
287 	atomic_inc(&m->pg_init_count);
288 	clear_bit(MPATHF_PG_INIT_REQUIRED, &m->flags);
289 
290 	/* Check here to reset pg_init_required */
291 	if (!m->current_pg)
292 		return 0;
293 
294 	if (test_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags))
295 		pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ?
296 						 m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS);
297 	list_for_each_entry(pgpath, &m->current_pg->pgpaths, list) {
298 		/* Skip failed paths */
299 		if (!pgpath->is_active)
300 			continue;
301 		if (queue_delayed_work(kmpath_handlerd, &pgpath->activate_path,
302 				       pg_init_delay))
303 			atomic_inc(&m->pg_init_in_progress);
304 	}
305 	return atomic_read(&m->pg_init_in_progress);
306 }
307 
308 static int pg_init_all_paths(struct multipath *m)
309 {
310 	int r;
311 	unsigned long flags;
312 
313 	spin_lock_irqsave(&m->lock, flags);
314 	r = __pg_init_all_paths(m);
315 	spin_unlock_irqrestore(&m->lock, flags);
316 
317 	return r;
318 }
319 
320 static void __switch_pg(struct multipath *m, struct priority_group *pg)
321 {
322 	m->current_pg = pg;
323 
324 	/* Must we initialise the PG first, and queue I/O till it's ready? */
325 	if (m->hw_handler_name) {
326 		set_bit(MPATHF_PG_INIT_REQUIRED, &m->flags);
327 		set_bit(MPATHF_QUEUE_IO, &m->flags);
328 	} else {
329 		clear_bit(MPATHF_PG_INIT_REQUIRED, &m->flags);
330 		clear_bit(MPATHF_QUEUE_IO, &m->flags);
331 	}
332 
333 	atomic_set(&m->pg_init_count, 0);
334 }
335 
336 static struct pgpath *choose_path_in_pg(struct multipath *m,
337 					struct priority_group *pg,
338 					size_t nr_bytes)
339 {
340 	unsigned long flags;
341 	struct dm_path *path;
342 	struct pgpath *pgpath;
343 
344 	path = pg->ps.type->select_path(&pg->ps, nr_bytes);
345 	if (!path)
346 		return ERR_PTR(-ENXIO);
347 
348 	pgpath = path_to_pgpath(path);
349 
350 	if (unlikely(lockless_dereference(m->current_pg) != pg)) {
351 		/* Only update current_pgpath if pg changed */
352 		spin_lock_irqsave(&m->lock, flags);
353 		m->current_pgpath = pgpath;
354 		__switch_pg(m, pg);
355 		spin_unlock_irqrestore(&m->lock, flags);
356 	}
357 
358 	return pgpath;
359 }
360 
361 static struct pgpath *choose_pgpath(struct multipath *m, size_t nr_bytes)
362 {
363 	unsigned long flags;
364 	struct priority_group *pg;
365 	struct pgpath *pgpath;
366 	bool bypassed = true;
367 
368 	if (!atomic_read(&m->nr_valid_paths)) {
369 		clear_bit(MPATHF_QUEUE_IO, &m->flags);
370 		goto failed;
371 	}
372 
373 	/* Were we instructed to switch PG? */
374 	if (lockless_dereference(m->next_pg)) {
375 		spin_lock_irqsave(&m->lock, flags);
376 		pg = m->next_pg;
377 		if (!pg) {
378 			spin_unlock_irqrestore(&m->lock, flags);
379 			goto check_current_pg;
380 		}
381 		m->next_pg = NULL;
382 		spin_unlock_irqrestore(&m->lock, flags);
383 		pgpath = choose_path_in_pg(m, pg, nr_bytes);
384 		if (!IS_ERR_OR_NULL(pgpath))
385 			return pgpath;
386 	}
387 
388 	/* Don't change PG until it has no remaining paths */
389 check_current_pg:
390 	pg = lockless_dereference(m->current_pg);
391 	if (pg) {
392 		pgpath = choose_path_in_pg(m, pg, nr_bytes);
393 		if (!IS_ERR_OR_NULL(pgpath))
394 			return pgpath;
395 	}
396 
397 	/*
398 	 * Loop through priority groups until we find a valid path.
399 	 * First time we skip PGs marked 'bypassed'.
400 	 * Second time we only try the ones we skipped, but set
401 	 * pg_init_delay_retry so we do not hammer controllers.
402 	 */
403 	do {
404 		list_for_each_entry(pg, &m->priority_groups, list) {
405 			if (pg->bypassed == bypassed)
406 				continue;
407 			pgpath = choose_path_in_pg(m, pg, nr_bytes);
408 			if (!IS_ERR_OR_NULL(pgpath)) {
409 				if (!bypassed)
410 					set_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags);
411 				return pgpath;
412 			}
413 		}
414 	} while (bypassed--);
415 
416 failed:
417 	spin_lock_irqsave(&m->lock, flags);
418 	m->current_pgpath = NULL;
419 	m->current_pg = NULL;
420 	spin_unlock_irqrestore(&m->lock, flags);
421 
422 	return NULL;
423 }
424 
425 /*
426  * Check whether bios must be queued in the device-mapper core rather
427  * than here in the target.
428  *
429  * If m->queue_if_no_path and m->saved_queue_if_no_path hold the
430  * same value then we are not between multipath_presuspend()
431  * and multipath_resume() calls and we have no need to check
432  * for the DMF_NOFLUSH_SUSPENDING flag.
433  */
434 static int must_push_back(struct multipath *m)
435 {
436 	return (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) ||
437 		((test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) !=
438 		  test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) &&
439 		 dm_noflush_suspending(m->ti)));
440 }
441 
442 /*
443  * Map cloned requests
444  */
445 static int __multipath_map(struct dm_target *ti, struct request *clone,
446 			   union map_info *map_context,
447 			   struct request *rq, struct request **__clone)
448 {
449 	struct multipath *m = ti->private;
450 	int r = DM_MAPIO_REQUEUE;
451 	size_t nr_bytes = clone ? blk_rq_bytes(clone) : blk_rq_bytes(rq);
452 	struct pgpath *pgpath;
453 	struct block_device *bdev;
454 	struct dm_mpath_io *mpio;
455 
456 	/* Do we need to select a new pgpath? */
457 	pgpath = lockless_dereference(m->current_pgpath);
458 	if (!pgpath || !test_bit(MPATHF_QUEUE_IO, &m->flags))
459 		pgpath = choose_pgpath(m, nr_bytes);
460 
461 	if (!pgpath) {
462 		if (!must_push_back(m))
463 			r = -EIO;	/* Failed */
464 		return r;
465 	} else if (test_bit(MPATHF_QUEUE_IO, &m->flags) ||
466 		   test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) {
467 		pg_init_all_paths(m);
468 		return r;
469 	}
470 
471 	mpio = set_mpio(m, map_context);
472 	if (!mpio)
473 		/* ENOMEM, requeue */
474 		return r;
475 
476 	mpio->pgpath = pgpath;
477 	mpio->nr_bytes = nr_bytes;
478 
479 	bdev = pgpath->path.dev->bdev;
480 
481 	if (clone) {
482 		/*
483 		 * Old request-based interface: allocated clone is passed in.
484 		 * Used by: .request_fn stacked on .request_fn path(s).
485 		 */
486 		clone->q = bdev_get_queue(bdev);
487 		clone->rq_disk = bdev->bd_disk;
488 		clone->cmd_flags |= REQ_FAILFAST_TRANSPORT;
489 	} else {
490 		/*
491 		 * blk-mq request-based interface; used by both:
492 		 * .request_fn stacked on blk-mq path(s) and
493 		 * blk-mq stacked on blk-mq path(s).
494 		 */
495 		*__clone = blk_mq_alloc_request(bdev_get_queue(bdev),
496 						rq_data_dir(rq), BLK_MQ_REQ_NOWAIT);
497 		if (IS_ERR(*__clone)) {
498 			/* ENOMEM, requeue */
499 			clear_request_fn_mpio(m, map_context);
500 			return r;
501 		}
502 		(*__clone)->bio = (*__clone)->biotail = NULL;
503 		(*__clone)->rq_disk = bdev->bd_disk;
504 		(*__clone)->cmd_flags |= REQ_FAILFAST_TRANSPORT;
505 	}
506 
507 	if (pgpath->pg->ps.type->start_io)
508 		pgpath->pg->ps.type->start_io(&pgpath->pg->ps,
509 					      &pgpath->path,
510 					      nr_bytes);
511 	return DM_MAPIO_REMAPPED;
512 }
513 
514 static int multipath_map(struct dm_target *ti, struct request *clone,
515 			 union map_info *map_context)
516 {
517 	return __multipath_map(ti, clone, map_context, NULL, NULL);
518 }
519 
520 static int multipath_clone_and_map(struct dm_target *ti, struct request *rq,
521 				   union map_info *map_context,
522 				   struct request **clone)
523 {
524 	return __multipath_map(ti, NULL, map_context, rq, clone);
525 }
526 
527 static void multipath_release_clone(struct request *clone)
528 {
529 	blk_mq_free_request(clone);
530 }
531 
532 /*
533  * If we run out of usable paths, should we queue I/O or error it?
534  */
535 static int queue_if_no_path(struct multipath *m, bool queue_if_no_path,
536 			    bool save_old_value)
537 {
538 	unsigned long flags;
539 
540 	spin_lock_irqsave(&m->lock, flags);
541 
542 	if (save_old_value) {
543 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
544 			set_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
545 		else
546 			clear_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
547 	} else {
548 		if (queue_if_no_path)
549 			set_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
550 		else
551 			clear_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags);
552 	}
553 	if (queue_if_no_path)
554 		set_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
555 	else
556 		clear_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
557 
558 	spin_unlock_irqrestore(&m->lock, flags);
559 
560 	if (!queue_if_no_path)
561 		dm_table_run_md_queue_async(m->ti->table);
562 
563 	return 0;
564 }
565 
566 /*
567  * An event is triggered whenever a path is taken out of use.
568  * Includes path failure and PG bypass.
569  */
570 static void trigger_event(struct work_struct *work)
571 {
572 	struct multipath *m =
573 		container_of(work, struct multipath, trigger_event);
574 
575 	dm_table_event(m->ti->table);
576 }
577 
578 /*-----------------------------------------------------------------
579  * Constructor/argument parsing:
580  * <#multipath feature args> [<arg>]*
581  * <#hw_handler args> [hw_handler [<arg>]*]
582  * <#priority groups>
583  * <initial priority group>
584  *     [<selector> <#selector args> [<arg>]*
585  *      <#paths> <#per-path selector args>
586  *         [<path> [<arg>]* ]+ ]+
587  *---------------------------------------------------------------*/
588 static int parse_path_selector(struct dm_arg_set *as, struct priority_group *pg,
589 			       struct dm_target *ti)
590 {
591 	int r;
592 	struct path_selector_type *pst;
593 	unsigned ps_argc;
594 
595 	static struct dm_arg _args[] = {
596 		{0, 1024, "invalid number of path selector args"},
597 	};
598 
599 	pst = dm_get_path_selector(dm_shift_arg(as));
600 	if (!pst) {
601 		ti->error = "unknown path selector type";
602 		return -EINVAL;
603 	}
604 
605 	r = dm_read_arg_group(_args, as, &ps_argc, &ti->error);
606 	if (r) {
607 		dm_put_path_selector(pst);
608 		return -EINVAL;
609 	}
610 
611 	r = pst->create(&pg->ps, ps_argc, as->argv);
612 	if (r) {
613 		dm_put_path_selector(pst);
614 		ti->error = "path selector constructor failed";
615 		return r;
616 	}
617 
618 	pg->ps.type = pst;
619 	dm_consume_args(as, ps_argc);
620 
621 	return 0;
622 }
623 
624 static struct pgpath *parse_path(struct dm_arg_set *as, struct path_selector *ps,
625 			       struct dm_target *ti)
626 {
627 	int r;
628 	struct pgpath *p;
629 	struct multipath *m = ti->private;
630 	struct request_queue *q = NULL;
631 	const char *attached_handler_name;
632 
633 	/* we need at least a path arg */
634 	if (as->argc < 1) {
635 		ti->error = "no device given";
636 		return ERR_PTR(-EINVAL);
637 	}
638 
639 	p = alloc_pgpath();
640 	if (!p)
641 		return ERR_PTR(-ENOMEM);
642 
643 	r = dm_get_device(ti, dm_shift_arg(as), dm_table_get_mode(ti->table),
644 			  &p->path.dev);
645 	if (r) {
646 		ti->error = "error getting device";
647 		goto bad;
648 	}
649 
650 	if (test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags) || m->hw_handler_name)
651 		q = bdev_get_queue(p->path.dev->bdev);
652 
653 	if (test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags)) {
654 retain:
655 		attached_handler_name = scsi_dh_attached_handler_name(q, GFP_KERNEL);
656 		if (attached_handler_name) {
657 			/*
658 			 * Reset hw_handler_name to match the attached handler
659 			 * and clear any hw_handler_params associated with the
660 			 * ignored handler.
661 			 *
662 			 * NB. This modifies the table line to show the actual
663 			 * handler instead of the original table passed in.
664 			 */
665 			kfree(m->hw_handler_name);
666 			m->hw_handler_name = attached_handler_name;
667 
668 			kfree(m->hw_handler_params);
669 			m->hw_handler_params = NULL;
670 		}
671 	}
672 
673 	if (m->hw_handler_name) {
674 		r = scsi_dh_attach(q, m->hw_handler_name);
675 		if (r == -EBUSY) {
676 			char b[BDEVNAME_SIZE];
677 
678 			printk(KERN_INFO "dm-mpath: retaining handler on device %s\n",
679 				bdevname(p->path.dev->bdev, b));
680 			goto retain;
681 		}
682 		if (r < 0) {
683 			ti->error = "error attaching hardware handler";
684 			dm_put_device(ti, p->path.dev);
685 			goto bad;
686 		}
687 
688 		if (m->hw_handler_params) {
689 			r = scsi_dh_set_params(q, m->hw_handler_params);
690 			if (r < 0) {
691 				ti->error = "unable to set hardware "
692 							"handler parameters";
693 				dm_put_device(ti, p->path.dev);
694 				goto bad;
695 			}
696 		}
697 	}
698 
699 	r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error);
700 	if (r) {
701 		dm_put_device(ti, p->path.dev);
702 		goto bad;
703 	}
704 
705 	return p;
706 
707  bad:
708 	free_pgpath(p);
709 	return ERR_PTR(r);
710 }
711 
712 static struct priority_group *parse_priority_group(struct dm_arg_set *as,
713 						   struct multipath *m)
714 {
715 	static struct dm_arg _args[] = {
716 		{1, 1024, "invalid number of paths"},
717 		{0, 1024, "invalid number of selector args"}
718 	};
719 
720 	int r;
721 	unsigned i, nr_selector_args, nr_args;
722 	struct priority_group *pg;
723 	struct dm_target *ti = m->ti;
724 
725 	if (as->argc < 2) {
726 		as->argc = 0;
727 		ti->error = "not enough priority group arguments";
728 		return ERR_PTR(-EINVAL);
729 	}
730 
731 	pg = alloc_priority_group();
732 	if (!pg) {
733 		ti->error = "couldn't allocate priority group";
734 		return ERR_PTR(-ENOMEM);
735 	}
736 	pg->m = m;
737 
738 	r = parse_path_selector(as, pg, ti);
739 	if (r)
740 		goto bad;
741 
742 	/*
743 	 * read the paths
744 	 */
745 	r = dm_read_arg(_args, as, &pg->nr_pgpaths, &ti->error);
746 	if (r)
747 		goto bad;
748 
749 	r = dm_read_arg(_args + 1, as, &nr_selector_args, &ti->error);
750 	if (r)
751 		goto bad;
752 
753 	nr_args = 1 + nr_selector_args;
754 	for (i = 0; i < pg->nr_pgpaths; i++) {
755 		struct pgpath *pgpath;
756 		struct dm_arg_set path_args;
757 
758 		if (as->argc < nr_args) {
759 			ti->error = "not enough path parameters";
760 			r = -EINVAL;
761 			goto bad;
762 		}
763 
764 		path_args.argc = nr_args;
765 		path_args.argv = as->argv;
766 
767 		pgpath = parse_path(&path_args, &pg->ps, ti);
768 		if (IS_ERR(pgpath)) {
769 			r = PTR_ERR(pgpath);
770 			goto bad;
771 		}
772 
773 		pgpath->pg = pg;
774 		list_add_tail(&pgpath->list, &pg->pgpaths);
775 		dm_consume_args(as, nr_args);
776 	}
777 
778 	return pg;
779 
780  bad:
781 	free_priority_group(pg, ti);
782 	return ERR_PTR(r);
783 }
784 
785 static int parse_hw_handler(struct dm_arg_set *as, struct multipath *m)
786 {
787 	unsigned hw_argc;
788 	int ret;
789 	struct dm_target *ti = m->ti;
790 
791 	static struct dm_arg _args[] = {
792 		{0, 1024, "invalid number of hardware handler args"},
793 	};
794 
795 	if (dm_read_arg_group(_args, as, &hw_argc, &ti->error))
796 		return -EINVAL;
797 
798 	if (!hw_argc)
799 		return 0;
800 
801 	m->hw_handler_name = kstrdup(dm_shift_arg(as), GFP_KERNEL);
802 
803 	if (hw_argc > 1) {
804 		char *p;
805 		int i, j, len = 4;
806 
807 		for (i = 0; i <= hw_argc - 2; i++)
808 			len += strlen(as->argv[i]) + 1;
809 		p = m->hw_handler_params = kzalloc(len, GFP_KERNEL);
810 		if (!p) {
811 			ti->error = "memory allocation failed";
812 			ret = -ENOMEM;
813 			goto fail;
814 		}
815 		j = sprintf(p, "%d", hw_argc - 1);
816 		for (i = 0, p+=j+1; i <= hw_argc - 2; i++, p+=j+1)
817 			j = sprintf(p, "%s", as->argv[i]);
818 	}
819 	dm_consume_args(as, hw_argc - 1);
820 
821 	return 0;
822 fail:
823 	kfree(m->hw_handler_name);
824 	m->hw_handler_name = NULL;
825 	return ret;
826 }
827 
828 static int parse_features(struct dm_arg_set *as, struct multipath *m)
829 {
830 	int r;
831 	unsigned argc;
832 	struct dm_target *ti = m->ti;
833 	const char *arg_name;
834 
835 	static struct dm_arg _args[] = {
836 		{0, 6, "invalid number of feature args"},
837 		{1, 50, "pg_init_retries must be between 1 and 50"},
838 		{0, 60000, "pg_init_delay_msecs must be between 0 and 60000"},
839 	};
840 
841 	r = dm_read_arg_group(_args, as, &argc, &ti->error);
842 	if (r)
843 		return -EINVAL;
844 
845 	if (!argc)
846 		return 0;
847 
848 	do {
849 		arg_name = dm_shift_arg(as);
850 		argc--;
851 
852 		if (!strcasecmp(arg_name, "queue_if_no_path")) {
853 			r = queue_if_no_path(m, true, false);
854 			continue;
855 		}
856 
857 		if (!strcasecmp(arg_name, "retain_attached_hw_handler")) {
858 			set_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags);
859 			continue;
860 		}
861 
862 		if (!strcasecmp(arg_name, "pg_init_retries") &&
863 		    (argc >= 1)) {
864 			r = dm_read_arg(_args + 1, as, &m->pg_init_retries, &ti->error);
865 			argc--;
866 			continue;
867 		}
868 
869 		if (!strcasecmp(arg_name, "pg_init_delay_msecs") &&
870 		    (argc >= 1)) {
871 			r = dm_read_arg(_args + 2, as, &m->pg_init_delay_msecs, &ti->error);
872 			argc--;
873 			continue;
874 		}
875 
876 		ti->error = "Unrecognised multipath feature request";
877 		r = -EINVAL;
878 	} while (argc && !r);
879 
880 	return r;
881 }
882 
883 static int multipath_ctr(struct dm_target *ti, unsigned int argc,
884 			 char **argv)
885 {
886 	/* target arguments */
887 	static struct dm_arg _args[] = {
888 		{0, 1024, "invalid number of priority groups"},
889 		{0, 1024, "invalid initial priority group number"},
890 	};
891 
892 	int r;
893 	struct multipath *m;
894 	struct dm_arg_set as;
895 	unsigned pg_count = 0;
896 	unsigned next_pg_num;
897 	bool use_blk_mq = dm_use_blk_mq(dm_table_get_md(ti->table));
898 
899 	as.argc = argc;
900 	as.argv = argv;
901 
902 	m = alloc_multipath(ti, use_blk_mq);
903 	if (!m) {
904 		ti->error = "can't allocate multipath";
905 		return -EINVAL;
906 	}
907 
908 	r = parse_features(&as, m);
909 	if (r)
910 		goto bad;
911 
912 	r = parse_hw_handler(&as, m);
913 	if (r)
914 		goto bad;
915 
916 	r = dm_read_arg(_args, &as, &m->nr_priority_groups, &ti->error);
917 	if (r)
918 		goto bad;
919 
920 	r = dm_read_arg(_args + 1, &as, &next_pg_num, &ti->error);
921 	if (r)
922 		goto bad;
923 
924 	if ((!m->nr_priority_groups && next_pg_num) ||
925 	    (m->nr_priority_groups && !next_pg_num)) {
926 		ti->error = "invalid initial priority group";
927 		r = -EINVAL;
928 		goto bad;
929 	}
930 
931 	/* parse the priority groups */
932 	while (as.argc) {
933 		struct priority_group *pg;
934 		unsigned nr_valid_paths = atomic_read(&m->nr_valid_paths);
935 
936 		pg = parse_priority_group(&as, m);
937 		if (IS_ERR(pg)) {
938 			r = PTR_ERR(pg);
939 			goto bad;
940 		}
941 
942 		nr_valid_paths += pg->nr_pgpaths;
943 		atomic_set(&m->nr_valid_paths, nr_valid_paths);
944 
945 		list_add_tail(&pg->list, &m->priority_groups);
946 		pg_count++;
947 		pg->pg_num = pg_count;
948 		if (!--next_pg_num)
949 			m->next_pg = pg;
950 	}
951 
952 	if (pg_count != m->nr_priority_groups) {
953 		ti->error = "priority group count mismatch";
954 		r = -EINVAL;
955 		goto bad;
956 	}
957 
958 	ti->num_flush_bios = 1;
959 	ti->num_discard_bios = 1;
960 	ti->num_write_same_bios = 1;
961 	if (use_blk_mq)
962 		ti->per_io_data_size = sizeof(struct dm_mpath_io);
963 
964 	return 0;
965 
966  bad:
967 	free_multipath(m);
968 	return r;
969 }
970 
971 static void multipath_wait_for_pg_init_completion(struct multipath *m)
972 {
973 	DECLARE_WAITQUEUE(wait, current);
974 
975 	add_wait_queue(&m->pg_init_wait, &wait);
976 
977 	while (1) {
978 		set_current_state(TASK_UNINTERRUPTIBLE);
979 
980 		if (!atomic_read(&m->pg_init_in_progress))
981 			break;
982 
983 		io_schedule();
984 	}
985 	set_current_state(TASK_RUNNING);
986 
987 	remove_wait_queue(&m->pg_init_wait, &wait);
988 }
989 
990 static void flush_multipath_work(struct multipath *m)
991 {
992 	set_bit(MPATHF_PG_INIT_DISABLED, &m->flags);
993 	smp_mb__after_atomic();
994 
995 	flush_workqueue(kmpath_handlerd);
996 	multipath_wait_for_pg_init_completion(m);
997 	flush_workqueue(kmultipathd);
998 	flush_work(&m->trigger_event);
999 
1000 	clear_bit(MPATHF_PG_INIT_DISABLED, &m->flags);
1001 	smp_mb__after_atomic();
1002 }
1003 
1004 static void multipath_dtr(struct dm_target *ti)
1005 {
1006 	struct multipath *m = ti->private;
1007 
1008 	flush_multipath_work(m);
1009 	free_multipath(m);
1010 }
1011 
1012 /*
1013  * Take a path out of use.
1014  */
1015 static int fail_path(struct pgpath *pgpath)
1016 {
1017 	unsigned long flags;
1018 	struct multipath *m = pgpath->pg->m;
1019 
1020 	spin_lock_irqsave(&m->lock, flags);
1021 
1022 	if (!pgpath->is_active)
1023 		goto out;
1024 
1025 	DMWARN("Failing path %s.", pgpath->path.dev->name);
1026 
1027 	pgpath->pg->ps.type->fail_path(&pgpath->pg->ps, &pgpath->path);
1028 	pgpath->is_active = false;
1029 	pgpath->fail_count++;
1030 
1031 	atomic_dec(&m->nr_valid_paths);
1032 
1033 	if (pgpath == m->current_pgpath)
1034 		m->current_pgpath = NULL;
1035 
1036 	dm_path_uevent(DM_UEVENT_PATH_FAILED, m->ti,
1037 		       pgpath->path.dev->name, atomic_read(&m->nr_valid_paths));
1038 
1039 	schedule_work(&m->trigger_event);
1040 
1041 out:
1042 	spin_unlock_irqrestore(&m->lock, flags);
1043 
1044 	return 0;
1045 }
1046 
1047 /*
1048  * Reinstate a previously-failed path
1049  */
1050 static int reinstate_path(struct pgpath *pgpath)
1051 {
1052 	int r = 0, run_queue = 0;
1053 	unsigned long flags;
1054 	struct multipath *m = pgpath->pg->m;
1055 	unsigned nr_valid_paths;
1056 
1057 	spin_lock_irqsave(&m->lock, flags);
1058 
1059 	if (pgpath->is_active)
1060 		goto out;
1061 
1062 	DMWARN("Reinstating path %s.", pgpath->path.dev->name);
1063 
1064 	r = pgpath->pg->ps.type->reinstate_path(&pgpath->pg->ps, &pgpath->path);
1065 	if (r)
1066 		goto out;
1067 
1068 	pgpath->is_active = true;
1069 
1070 	nr_valid_paths = atomic_inc_return(&m->nr_valid_paths);
1071 	if (nr_valid_paths == 1) {
1072 		m->current_pgpath = NULL;
1073 		run_queue = 1;
1074 	} else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) {
1075 		if (queue_work(kmpath_handlerd, &pgpath->activate_path.work))
1076 			atomic_inc(&m->pg_init_in_progress);
1077 	}
1078 
1079 	dm_path_uevent(DM_UEVENT_PATH_REINSTATED, m->ti,
1080 		       pgpath->path.dev->name, nr_valid_paths);
1081 
1082 	schedule_work(&m->trigger_event);
1083 
1084 out:
1085 	spin_unlock_irqrestore(&m->lock, flags);
1086 	if (run_queue)
1087 		dm_table_run_md_queue_async(m->ti->table);
1088 
1089 	return r;
1090 }
1091 
1092 /*
1093  * Fail or reinstate all paths that match the provided struct dm_dev.
1094  */
1095 static int action_dev(struct multipath *m, struct dm_dev *dev,
1096 		      action_fn action)
1097 {
1098 	int r = -EINVAL;
1099 	struct pgpath *pgpath;
1100 	struct priority_group *pg;
1101 
1102 	list_for_each_entry(pg, &m->priority_groups, list) {
1103 		list_for_each_entry(pgpath, &pg->pgpaths, list) {
1104 			if (pgpath->path.dev == dev)
1105 				r = action(pgpath);
1106 		}
1107 	}
1108 
1109 	return r;
1110 }
1111 
1112 /*
1113  * Temporarily try to avoid having to use the specified PG
1114  */
1115 static void bypass_pg(struct multipath *m, struct priority_group *pg,
1116 		      bool bypassed)
1117 {
1118 	unsigned long flags;
1119 
1120 	spin_lock_irqsave(&m->lock, flags);
1121 
1122 	pg->bypassed = bypassed;
1123 	m->current_pgpath = NULL;
1124 	m->current_pg = NULL;
1125 
1126 	spin_unlock_irqrestore(&m->lock, flags);
1127 
1128 	schedule_work(&m->trigger_event);
1129 }
1130 
1131 /*
1132  * Switch to using the specified PG from the next I/O that gets mapped
1133  */
1134 static int switch_pg_num(struct multipath *m, const char *pgstr)
1135 {
1136 	struct priority_group *pg;
1137 	unsigned pgnum;
1138 	unsigned long flags;
1139 	char dummy;
1140 
1141 	if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum ||
1142 	    (pgnum > m->nr_priority_groups)) {
1143 		DMWARN("invalid PG number supplied to switch_pg_num");
1144 		return -EINVAL;
1145 	}
1146 
1147 	spin_lock_irqsave(&m->lock, flags);
1148 	list_for_each_entry(pg, &m->priority_groups, list) {
1149 		pg->bypassed = false;
1150 		if (--pgnum)
1151 			continue;
1152 
1153 		m->current_pgpath = NULL;
1154 		m->current_pg = NULL;
1155 		m->next_pg = pg;
1156 	}
1157 	spin_unlock_irqrestore(&m->lock, flags);
1158 
1159 	schedule_work(&m->trigger_event);
1160 	return 0;
1161 }
1162 
1163 /*
1164  * Set/clear bypassed status of a PG.
1165  * PGs are numbered upwards from 1 in the order they were declared.
1166  */
1167 static int bypass_pg_num(struct multipath *m, const char *pgstr, bool bypassed)
1168 {
1169 	struct priority_group *pg;
1170 	unsigned pgnum;
1171 	char dummy;
1172 
1173 	if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum ||
1174 	    (pgnum > m->nr_priority_groups)) {
1175 		DMWARN("invalid PG number supplied to bypass_pg");
1176 		return -EINVAL;
1177 	}
1178 
1179 	list_for_each_entry(pg, &m->priority_groups, list) {
1180 		if (!--pgnum)
1181 			break;
1182 	}
1183 
1184 	bypass_pg(m, pg, bypassed);
1185 	return 0;
1186 }
1187 
1188 /*
1189  * Should we retry pg_init immediately?
1190  */
1191 static bool pg_init_limit_reached(struct multipath *m, struct pgpath *pgpath)
1192 {
1193 	unsigned long flags;
1194 	bool limit_reached = false;
1195 
1196 	spin_lock_irqsave(&m->lock, flags);
1197 
1198 	if (atomic_read(&m->pg_init_count) <= m->pg_init_retries &&
1199 	    !test_bit(MPATHF_PG_INIT_DISABLED, &m->flags))
1200 		set_bit(MPATHF_PG_INIT_REQUIRED, &m->flags);
1201 	else
1202 		limit_reached = true;
1203 
1204 	spin_unlock_irqrestore(&m->lock, flags);
1205 
1206 	return limit_reached;
1207 }
1208 
1209 static void pg_init_done(void *data, int errors)
1210 {
1211 	struct pgpath *pgpath = data;
1212 	struct priority_group *pg = pgpath->pg;
1213 	struct multipath *m = pg->m;
1214 	unsigned long flags;
1215 	bool delay_retry = false;
1216 
1217 	/* device or driver problems */
1218 	switch (errors) {
1219 	case SCSI_DH_OK:
1220 		break;
1221 	case SCSI_DH_NOSYS:
1222 		if (!m->hw_handler_name) {
1223 			errors = 0;
1224 			break;
1225 		}
1226 		DMERR("Could not failover the device: Handler scsi_dh_%s "
1227 		      "Error %d.", m->hw_handler_name, errors);
1228 		/*
1229 		 * Fail path for now, so we do not ping pong
1230 		 */
1231 		fail_path(pgpath);
1232 		break;
1233 	case SCSI_DH_DEV_TEMP_BUSY:
1234 		/*
1235 		 * Probably doing something like FW upgrade on the
1236 		 * controller so try the other pg.
1237 		 */
1238 		bypass_pg(m, pg, true);
1239 		break;
1240 	case SCSI_DH_RETRY:
1241 		/* Wait before retrying. */
1242 		delay_retry = 1;
1243 	case SCSI_DH_IMM_RETRY:
1244 	case SCSI_DH_RES_TEMP_UNAVAIL:
1245 		if (pg_init_limit_reached(m, pgpath))
1246 			fail_path(pgpath);
1247 		errors = 0;
1248 		break;
1249 	case SCSI_DH_DEV_OFFLINED:
1250 	default:
1251 		/*
1252 		 * We probably do not want to fail the path for a device
1253 		 * error, but this is what the old dm did. In future
1254 		 * patches we can do more advanced handling.
1255 		 */
1256 		fail_path(pgpath);
1257 	}
1258 
1259 	spin_lock_irqsave(&m->lock, flags);
1260 	if (errors) {
1261 		if (pgpath == m->current_pgpath) {
1262 			DMERR("Could not failover device. Error %d.", errors);
1263 			m->current_pgpath = NULL;
1264 			m->current_pg = NULL;
1265 		}
1266 	} else if (!test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags))
1267 		pg->bypassed = false;
1268 
1269 	if (atomic_dec_return(&m->pg_init_in_progress) > 0)
1270 		/* Activations of other paths are still on going */
1271 		goto out;
1272 
1273 	if (test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) {
1274 		if (delay_retry)
1275 			set_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags);
1276 		else
1277 			clear_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags);
1278 
1279 		if (__pg_init_all_paths(m))
1280 			goto out;
1281 	}
1282 	clear_bit(MPATHF_QUEUE_IO, &m->flags);
1283 
1284 	/*
1285 	 * Wake up any thread waiting to suspend.
1286 	 */
1287 	wake_up(&m->pg_init_wait);
1288 
1289 out:
1290 	spin_unlock_irqrestore(&m->lock, flags);
1291 }
1292 
1293 static void activate_path(struct work_struct *work)
1294 {
1295 	struct pgpath *pgpath =
1296 		container_of(work, struct pgpath, activate_path.work);
1297 
1298 	if (pgpath->is_active)
1299 		scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
1300 				 pg_init_done, pgpath);
1301 	else
1302 		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED);
1303 }
1304 
1305 static int noretry_error(int error)
1306 {
1307 	switch (error) {
1308 	case -EOPNOTSUPP:
1309 	case -EREMOTEIO:
1310 	case -EILSEQ:
1311 	case -ENODATA:
1312 	case -ENOSPC:
1313 		return 1;
1314 	}
1315 
1316 	/* Anything else could be a path failure, so should be retried */
1317 	return 0;
1318 }
1319 
1320 /*
1321  * end_io handling
1322  */
1323 static int do_end_io(struct multipath *m, struct request *clone,
1324 		     int error, struct dm_mpath_io *mpio)
1325 {
1326 	/*
1327 	 * We don't queue any clone request inside the multipath target
1328 	 * during end I/O handling, since those clone requests don't have
1329 	 * bio clones.  If we queue them inside the multipath target,
1330 	 * we need to make bio clones, that requires memory allocation.
1331 	 * (See drivers/md/dm.c:end_clone_bio() about why the clone requests
1332 	 *  don't have bio clones.)
1333 	 * Instead of queueing the clone request here, we queue the original
1334 	 * request into dm core, which will remake a clone request and
1335 	 * clone bios for it and resubmit it later.
1336 	 */
1337 	int r = DM_ENDIO_REQUEUE;
1338 
1339 	if (!error && !clone->errors)
1340 		return 0;	/* I/O complete */
1341 
1342 	if (noretry_error(error))
1343 		return error;
1344 
1345 	if (mpio->pgpath)
1346 		fail_path(mpio->pgpath);
1347 
1348 	if (!atomic_read(&m->nr_valid_paths)) {
1349 		if (!test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) {
1350 			if (!must_push_back(m))
1351 				r = -EIO;
1352 		} else {
1353 			if (error == -EBADE)
1354 				r = error;
1355 		}
1356 	}
1357 
1358 	return r;
1359 }
1360 
1361 static int multipath_end_io(struct dm_target *ti, struct request *clone,
1362 			    int error, union map_info *map_context)
1363 {
1364 	struct multipath *m = ti->private;
1365 	struct dm_mpath_io *mpio = get_mpio(map_context);
1366 	struct pgpath *pgpath;
1367 	struct path_selector *ps;
1368 	int r;
1369 
1370 	BUG_ON(!mpio);
1371 
1372 	r = do_end_io(m, clone, error, mpio);
1373 	pgpath = mpio->pgpath;
1374 	if (pgpath) {
1375 		ps = &pgpath->pg->ps;
1376 		if (ps->type->end_io)
1377 			ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes);
1378 	}
1379 	clear_request_fn_mpio(m, map_context);
1380 
1381 	return r;
1382 }
1383 
1384 /*
1385  * Suspend can't complete until all the I/O is processed so if
1386  * the last path fails we must error any remaining I/O.
1387  * Note that if the freeze_bdev fails while suspending, the
1388  * queue_if_no_path state is lost - userspace should reset it.
1389  */
1390 static void multipath_presuspend(struct dm_target *ti)
1391 {
1392 	struct multipath *m = ti->private;
1393 
1394 	queue_if_no_path(m, false, true);
1395 }
1396 
1397 static void multipath_postsuspend(struct dm_target *ti)
1398 {
1399 	struct multipath *m = ti->private;
1400 
1401 	mutex_lock(&m->work_mutex);
1402 	flush_multipath_work(m);
1403 	mutex_unlock(&m->work_mutex);
1404 }
1405 
1406 /*
1407  * Restore the queue_if_no_path setting.
1408  */
1409 static void multipath_resume(struct dm_target *ti)
1410 {
1411 	struct multipath *m = ti->private;
1412 
1413 	if (test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags))
1414 		set_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
1415 	else
1416 		clear_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags);
1417 	smp_mb__after_atomic();
1418 }
1419 
1420 /*
1421  * Info output has the following format:
1422  * num_multipath_feature_args [multipath_feature_args]*
1423  * num_handler_status_args [handler_status_args]*
1424  * num_groups init_group_number
1425  *            [A|D|E num_ps_status_args [ps_status_args]*
1426  *             num_paths num_selector_args
1427  *             [path_dev A|F fail_count [selector_args]* ]+ ]+
1428  *
1429  * Table output has the following format (identical to the constructor string):
1430  * num_feature_args [features_args]*
1431  * num_handler_args hw_handler [hw_handler_args]*
1432  * num_groups init_group_number
1433  *     [priority selector-name num_ps_args [ps_args]*
1434  *      num_paths num_selector_args [path_dev [selector_args]* ]+ ]+
1435  */
1436 static void multipath_status(struct dm_target *ti, status_type_t type,
1437 			     unsigned status_flags, char *result, unsigned maxlen)
1438 {
1439 	int sz = 0;
1440 	unsigned long flags;
1441 	struct multipath *m = ti->private;
1442 	struct priority_group *pg;
1443 	struct pgpath *p;
1444 	unsigned pg_num;
1445 	char state;
1446 
1447 	spin_lock_irqsave(&m->lock, flags);
1448 
1449 	/* Features */
1450 	if (type == STATUSTYPE_INFO)
1451 		DMEMIT("2 %u %u ", test_bit(MPATHF_QUEUE_IO, &m->flags),
1452 		       atomic_read(&m->pg_init_count));
1453 	else {
1454 		DMEMIT("%u ", test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) +
1455 			      (m->pg_init_retries > 0) * 2 +
1456 			      (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) * 2 +
1457 			      test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags));
1458 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
1459 			DMEMIT("queue_if_no_path ");
1460 		if (m->pg_init_retries)
1461 			DMEMIT("pg_init_retries %u ", m->pg_init_retries);
1462 		if (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT)
1463 			DMEMIT("pg_init_delay_msecs %u ", m->pg_init_delay_msecs);
1464 		if (test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags))
1465 			DMEMIT("retain_attached_hw_handler ");
1466 	}
1467 
1468 	if (!m->hw_handler_name || type == STATUSTYPE_INFO)
1469 		DMEMIT("0 ");
1470 	else
1471 		DMEMIT("1 %s ", m->hw_handler_name);
1472 
1473 	DMEMIT("%u ", m->nr_priority_groups);
1474 
1475 	if (m->next_pg)
1476 		pg_num = m->next_pg->pg_num;
1477 	else if (m->current_pg)
1478 		pg_num = m->current_pg->pg_num;
1479 	else
1480 		pg_num = (m->nr_priority_groups ? 1 : 0);
1481 
1482 	DMEMIT("%u ", pg_num);
1483 
1484 	switch (type) {
1485 	case STATUSTYPE_INFO:
1486 		list_for_each_entry(pg, &m->priority_groups, list) {
1487 			if (pg->bypassed)
1488 				state = 'D';	/* Disabled */
1489 			else if (pg == m->current_pg)
1490 				state = 'A';	/* Currently Active */
1491 			else
1492 				state = 'E';	/* Enabled */
1493 
1494 			DMEMIT("%c ", state);
1495 
1496 			if (pg->ps.type->status)
1497 				sz += pg->ps.type->status(&pg->ps, NULL, type,
1498 							  result + sz,
1499 							  maxlen - sz);
1500 			else
1501 				DMEMIT("0 ");
1502 
1503 			DMEMIT("%u %u ", pg->nr_pgpaths,
1504 			       pg->ps.type->info_args);
1505 
1506 			list_for_each_entry(p, &pg->pgpaths, list) {
1507 				DMEMIT("%s %s %u ", p->path.dev->name,
1508 				       p->is_active ? "A" : "F",
1509 				       p->fail_count);
1510 				if (pg->ps.type->status)
1511 					sz += pg->ps.type->status(&pg->ps,
1512 					      &p->path, type, result + sz,
1513 					      maxlen - sz);
1514 			}
1515 		}
1516 		break;
1517 
1518 	case STATUSTYPE_TABLE:
1519 		list_for_each_entry(pg, &m->priority_groups, list) {
1520 			DMEMIT("%s ", pg->ps.type->name);
1521 
1522 			if (pg->ps.type->status)
1523 				sz += pg->ps.type->status(&pg->ps, NULL, type,
1524 							  result + sz,
1525 							  maxlen - sz);
1526 			else
1527 				DMEMIT("0 ");
1528 
1529 			DMEMIT("%u %u ", pg->nr_pgpaths,
1530 			       pg->ps.type->table_args);
1531 
1532 			list_for_each_entry(p, &pg->pgpaths, list) {
1533 				DMEMIT("%s ", p->path.dev->name);
1534 				if (pg->ps.type->status)
1535 					sz += pg->ps.type->status(&pg->ps,
1536 					      &p->path, type, result + sz,
1537 					      maxlen - sz);
1538 			}
1539 		}
1540 		break;
1541 	}
1542 
1543 	spin_unlock_irqrestore(&m->lock, flags);
1544 }
1545 
1546 static int multipath_message(struct dm_target *ti, unsigned argc, char **argv)
1547 {
1548 	int r = -EINVAL;
1549 	struct dm_dev *dev;
1550 	struct multipath *m = ti->private;
1551 	action_fn action;
1552 
1553 	mutex_lock(&m->work_mutex);
1554 
1555 	if (dm_suspended(ti)) {
1556 		r = -EBUSY;
1557 		goto out;
1558 	}
1559 
1560 	if (argc == 1) {
1561 		if (!strcasecmp(argv[0], "queue_if_no_path")) {
1562 			r = queue_if_no_path(m, true, false);
1563 			goto out;
1564 		} else if (!strcasecmp(argv[0], "fail_if_no_path")) {
1565 			r = queue_if_no_path(m, false, false);
1566 			goto out;
1567 		}
1568 	}
1569 
1570 	if (argc != 2) {
1571 		DMWARN("Invalid multipath message arguments. Expected 2 arguments, got %d.", argc);
1572 		goto out;
1573 	}
1574 
1575 	if (!strcasecmp(argv[0], "disable_group")) {
1576 		r = bypass_pg_num(m, argv[1], true);
1577 		goto out;
1578 	} else if (!strcasecmp(argv[0], "enable_group")) {
1579 		r = bypass_pg_num(m, argv[1], false);
1580 		goto out;
1581 	} else if (!strcasecmp(argv[0], "switch_group")) {
1582 		r = switch_pg_num(m, argv[1]);
1583 		goto out;
1584 	} else if (!strcasecmp(argv[0], "reinstate_path"))
1585 		action = reinstate_path;
1586 	else if (!strcasecmp(argv[0], "fail_path"))
1587 		action = fail_path;
1588 	else {
1589 		DMWARN("Unrecognised multipath message received: %s", argv[0]);
1590 		goto out;
1591 	}
1592 
1593 	r = dm_get_device(ti, argv[1], dm_table_get_mode(ti->table), &dev);
1594 	if (r) {
1595 		DMWARN("message: error getting device %s",
1596 		       argv[1]);
1597 		goto out;
1598 	}
1599 
1600 	r = action_dev(m, dev, action);
1601 
1602 	dm_put_device(ti, dev);
1603 
1604 out:
1605 	mutex_unlock(&m->work_mutex);
1606 	return r;
1607 }
1608 
1609 static int multipath_prepare_ioctl(struct dm_target *ti,
1610 		struct block_device **bdev, fmode_t *mode)
1611 {
1612 	struct multipath *m = ti->private;
1613 	struct pgpath *current_pgpath;
1614 	int r;
1615 
1616 	current_pgpath = lockless_dereference(m->current_pgpath);
1617 	if (!current_pgpath)
1618 		current_pgpath = choose_pgpath(m, 0);
1619 
1620 	if (current_pgpath) {
1621 		if (!test_bit(MPATHF_QUEUE_IO, &m->flags)) {
1622 			*bdev = current_pgpath->path.dev->bdev;
1623 			*mode = current_pgpath->path.dev->mode;
1624 			r = 0;
1625 		} else {
1626 			/* pg_init has not started or completed */
1627 			r = -ENOTCONN;
1628 		}
1629 	} else {
1630 		/* No path is available */
1631 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags))
1632 			r = -ENOTCONN;
1633 		else
1634 			r = -EIO;
1635 	}
1636 
1637 	if (r == -ENOTCONN) {
1638 		if (!lockless_dereference(m->current_pg)) {
1639 			/* Path status changed, redo selection */
1640 			(void) choose_pgpath(m, 0);
1641 		}
1642 		if (test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags))
1643 			pg_init_all_paths(m);
1644 		dm_table_run_md_queue_async(m->ti->table);
1645 	}
1646 
1647 	/*
1648 	 * Only pass ioctls through if the device sizes match exactly.
1649 	 */
1650 	if (!r && ti->len != i_size_read((*bdev)->bd_inode) >> SECTOR_SHIFT)
1651 		return 1;
1652 	return r;
1653 }
1654 
1655 static int multipath_iterate_devices(struct dm_target *ti,
1656 				     iterate_devices_callout_fn fn, void *data)
1657 {
1658 	struct multipath *m = ti->private;
1659 	struct priority_group *pg;
1660 	struct pgpath *p;
1661 	int ret = 0;
1662 
1663 	list_for_each_entry(pg, &m->priority_groups, list) {
1664 		list_for_each_entry(p, &pg->pgpaths, list) {
1665 			ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
1666 			if (ret)
1667 				goto out;
1668 		}
1669 	}
1670 
1671 out:
1672 	return ret;
1673 }
1674 
1675 static int pgpath_busy(struct pgpath *pgpath)
1676 {
1677 	struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev);
1678 
1679 	return blk_lld_busy(q);
1680 }
1681 
1682 /*
1683  * We return "busy", only when we can map I/Os but underlying devices
1684  * are busy (so even if we map I/Os now, the I/Os will wait on
1685  * the underlying queue).
1686  * In other words, if we want to kill I/Os or queue them inside us
1687  * due to map unavailability, we don't return "busy".  Otherwise,
1688  * dm core won't give us the I/Os and we can't do what we want.
1689  */
1690 static int multipath_busy(struct dm_target *ti)
1691 {
1692 	bool busy = false, has_active = false;
1693 	struct multipath *m = ti->private;
1694 	struct priority_group *pg, *next_pg;
1695 	struct pgpath *pgpath;
1696 
1697 	/* pg_init in progress or no paths available */
1698 	if (atomic_read(&m->pg_init_in_progress) ||
1699 	    (!atomic_read(&m->nr_valid_paths) && test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)))
1700 		return true;
1701 
1702 	/* Guess which priority_group will be used at next mapping time */
1703 	pg = lockless_dereference(m->current_pg);
1704 	next_pg = lockless_dereference(m->next_pg);
1705 	if (unlikely(!lockless_dereference(m->current_pgpath) && next_pg))
1706 		pg = next_pg;
1707 
1708 	if (!pg) {
1709 		/*
1710 		 * We don't know which pg will be used at next mapping time.
1711 		 * We don't call choose_pgpath() here to avoid to trigger
1712 		 * pg_init just by busy checking.
1713 		 * So we don't know whether underlying devices we will be using
1714 		 * at next mapping time are busy or not. Just try mapping.
1715 		 */
1716 		return busy;
1717 	}
1718 
1719 	/*
1720 	 * If there is one non-busy active path at least, the path selector
1721 	 * will be able to select it. So we consider such a pg as not busy.
1722 	 */
1723 	busy = true;
1724 	list_for_each_entry(pgpath, &pg->pgpaths, list) {
1725 		if (pgpath->is_active) {
1726 			has_active = true;
1727 			if (!pgpath_busy(pgpath)) {
1728 				busy = false;
1729 				break;
1730 			}
1731 		}
1732 	}
1733 
1734 	if (!has_active) {
1735 		/*
1736 		 * No active path in this pg, so this pg won't be used and
1737 		 * the current_pg will be changed at next mapping time.
1738 		 * We need to try mapping to determine it.
1739 		 */
1740 		busy = false;
1741 	}
1742 
1743 	return busy;
1744 }
1745 
1746 /*-----------------------------------------------------------------
1747  * Module setup
1748  *---------------------------------------------------------------*/
1749 static struct target_type multipath_target = {
1750 	.name = "multipath",
1751 	.version = {1, 11, 0},
1752 	.features = DM_TARGET_SINGLETON | DM_TARGET_IMMUTABLE,
1753 	.module = THIS_MODULE,
1754 	.ctr = multipath_ctr,
1755 	.dtr = multipath_dtr,
1756 	.map_rq = multipath_map,
1757 	.clone_and_map_rq = multipath_clone_and_map,
1758 	.release_clone_rq = multipath_release_clone,
1759 	.rq_end_io = multipath_end_io,
1760 	.presuspend = multipath_presuspend,
1761 	.postsuspend = multipath_postsuspend,
1762 	.resume = multipath_resume,
1763 	.status = multipath_status,
1764 	.message = multipath_message,
1765 	.prepare_ioctl = multipath_prepare_ioctl,
1766 	.iterate_devices = multipath_iterate_devices,
1767 	.busy = multipath_busy,
1768 };
1769 
1770 static int __init dm_multipath_init(void)
1771 {
1772 	int r;
1773 
1774 	/* allocate a slab for the dm_ios */
1775 	_mpio_cache = KMEM_CACHE(dm_mpath_io, 0);
1776 	if (!_mpio_cache)
1777 		return -ENOMEM;
1778 
1779 	r = dm_register_target(&multipath_target);
1780 	if (r < 0) {
1781 		DMERR("register failed %d", r);
1782 		r = -EINVAL;
1783 		goto bad_register_target;
1784 	}
1785 
1786 	kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0);
1787 	if (!kmultipathd) {
1788 		DMERR("failed to create workqueue kmpathd");
1789 		r = -ENOMEM;
1790 		goto bad_alloc_kmultipathd;
1791 	}
1792 
1793 	/*
1794 	 * A separate workqueue is used to handle the device handlers
1795 	 * to avoid overloading existing workqueue. Overloading the
1796 	 * old workqueue would also create a bottleneck in the
1797 	 * path of the storage hardware device activation.
1798 	 */
1799 	kmpath_handlerd = alloc_ordered_workqueue("kmpath_handlerd",
1800 						  WQ_MEM_RECLAIM);
1801 	if (!kmpath_handlerd) {
1802 		DMERR("failed to create workqueue kmpath_handlerd");
1803 		r = -ENOMEM;
1804 		goto bad_alloc_kmpath_handlerd;
1805 	}
1806 
1807 	DMINFO("version %u.%u.%u loaded",
1808 	       multipath_target.version[0], multipath_target.version[1],
1809 	       multipath_target.version[2]);
1810 
1811 	return 0;
1812 
1813 bad_alloc_kmpath_handlerd:
1814 	destroy_workqueue(kmultipathd);
1815 bad_alloc_kmultipathd:
1816 	dm_unregister_target(&multipath_target);
1817 bad_register_target:
1818 	kmem_cache_destroy(_mpio_cache);
1819 
1820 	return r;
1821 }
1822 
1823 static void __exit dm_multipath_exit(void)
1824 {
1825 	destroy_workqueue(kmpath_handlerd);
1826 	destroy_workqueue(kmultipathd);
1827 
1828 	dm_unregister_target(&multipath_target);
1829 	kmem_cache_destroy(_mpio_cache);
1830 }
1831 
1832 module_init(dm_multipath_init);
1833 module_exit(dm_multipath_exit);
1834 
1835 MODULE_DESCRIPTION(DM_NAME " multipath target");
1836 MODULE_AUTHOR("Sistina Software <dm-devel@redhat.com>");
1837 MODULE_LICENSE("GPL");
1838