1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _BCACHE_H 3 #define _BCACHE_H 4 5 /* 6 * SOME HIGH LEVEL CODE DOCUMENTATION: 7 * 8 * Bcache mostly works with cache sets, cache devices, and backing devices. 9 * 10 * Support for multiple cache devices hasn't quite been finished off yet, but 11 * it's about 95% plumbed through. A cache set and its cache devices is sort of 12 * like a md raid array and its component devices. Most of the code doesn't care 13 * about individual cache devices, the main abstraction is the cache set. 14 * 15 * Multiple cache devices is intended to give us the ability to mirror dirty 16 * cached data and metadata, without mirroring clean cached data. 17 * 18 * Backing devices are different, in that they have a lifetime independent of a 19 * cache set. When you register a newly formatted backing device it'll come up 20 * in passthrough mode, and then you can attach and detach a backing device from 21 * a cache set at runtime - while it's mounted and in use. Detaching implicitly 22 * invalidates any cached data for that backing device. 23 * 24 * A cache set can have multiple (many) backing devices attached to it. 25 * 26 * There's also flash only volumes - this is the reason for the distinction 27 * between struct cached_dev and struct bcache_device. A flash only volume 28 * works much like a bcache device that has a backing device, except the 29 * "cached" data is always dirty. The end result is that we get thin 30 * provisioning with very little additional code. 31 * 32 * Flash only volumes work but they're not production ready because the moving 33 * garbage collector needs more work. More on that later. 34 * 35 * BUCKETS/ALLOCATION: 36 * 37 * Bcache is primarily designed for caching, which means that in normal 38 * operation all of our available space will be allocated. Thus, we need an 39 * efficient way of deleting things from the cache so we can write new things to 40 * it. 41 * 42 * To do this, we first divide the cache device up into buckets. A bucket is the 43 * unit of allocation; they're typically around 1 mb - anywhere from 128k to 2M+ 44 * works efficiently. 45 * 46 * Each bucket has a 16 bit priority, and an 8 bit generation associated with 47 * it. The gens and priorities for all the buckets are stored contiguously and 48 * packed on disk (in a linked list of buckets - aside from the superblock, all 49 * of bcache's metadata is stored in buckets). 50 * 51 * The priority is used to implement an LRU. We reset a bucket's priority when 52 * we allocate it or on cache it, and every so often we decrement the priority 53 * of each bucket. It could be used to implement something more sophisticated, 54 * if anyone ever gets around to it. 55 * 56 * The generation is used for invalidating buckets. Each pointer also has an 8 57 * bit generation embedded in it; for a pointer to be considered valid, its gen 58 * must match the gen of the bucket it points into. Thus, to reuse a bucket all 59 * we have to do is increment its gen (and write its new gen to disk; we batch 60 * this up). 61 * 62 * Bcache is entirely COW - we never write twice to a bucket, even buckets that 63 * contain metadata (including btree nodes). 64 * 65 * THE BTREE: 66 * 67 * Bcache is in large part design around the btree. 68 * 69 * At a high level, the btree is just an index of key -> ptr tuples. 70 * 71 * Keys represent extents, and thus have a size field. Keys also have a variable 72 * number of pointers attached to them (potentially zero, which is handy for 73 * invalidating the cache). 74 * 75 * The key itself is an inode:offset pair. The inode number corresponds to a 76 * backing device or a flash only volume. The offset is the ending offset of the 77 * extent within the inode - not the starting offset; this makes lookups 78 * slightly more convenient. 79 * 80 * Pointers contain the cache device id, the offset on that device, and an 8 bit 81 * generation number. More on the gen later. 82 * 83 * Index lookups are not fully abstracted - cache lookups in particular are 84 * still somewhat mixed in with the btree code, but things are headed in that 85 * direction. 86 * 87 * Updates are fairly well abstracted, though. There are two different ways of 88 * updating the btree; insert and replace. 89 * 90 * BTREE_INSERT will just take a list of keys and insert them into the btree - 91 * overwriting (possibly only partially) any extents they overlap with. This is 92 * used to update the index after a write. 93 * 94 * BTREE_REPLACE is really cmpxchg(); it inserts a key into the btree iff it is 95 * overwriting a key that matches another given key. This is used for inserting 96 * data into the cache after a cache miss, and for background writeback, and for 97 * the moving garbage collector. 98 * 99 * There is no "delete" operation; deleting things from the index is 100 * accomplished by either by invalidating pointers (by incrementing a bucket's 101 * gen) or by inserting a key with 0 pointers - which will overwrite anything 102 * previously present at that location in the index. 103 * 104 * This means that there are always stale/invalid keys in the btree. They're 105 * filtered out by the code that iterates through a btree node, and removed when 106 * a btree node is rewritten. 107 * 108 * BTREE NODES: 109 * 110 * Our unit of allocation is a bucket, and we we can't arbitrarily allocate and 111 * free smaller than a bucket - so, that's how big our btree nodes are. 112 * 113 * (If buckets are really big we'll only use part of the bucket for a btree node 114 * - no less than 1/4th - but a bucket still contains no more than a single 115 * btree node. I'd actually like to change this, but for now we rely on the 116 * bucket's gen for deleting btree nodes when we rewrite/split a node.) 117 * 118 * Anyways, btree nodes are big - big enough to be inefficient with a textbook 119 * btree implementation. 120 * 121 * The way this is solved is that btree nodes are internally log structured; we 122 * can append new keys to an existing btree node without rewriting it. This 123 * means each set of keys we write is sorted, but the node is not. 124 * 125 * We maintain this log structure in memory - keeping 1Mb of keys sorted would 126 * be expensive, and we have to distinguish between the keys we have written and 127 * the keys we haven't. So to do a lookup in a btree node, we have to search 128 * each sorted set. But we do merge written sets together lazily, so the cost of 129 * these extra searches is quite low (normally most of the keys in a btree node 130 * will be in one big set, and then there'll be one or two sets that are much 131 * smaller). 132 * 133 * This log structure makes bcache's btree more of a hybrid between a 134 * conventional btree and a compacting data structure, with some of the 135 * advantages of both. 136 * 137 * GARBAGE COLLECTION: 138 * 139 * We can't just invalidate any bucket - it might contain dirty data or 140 * metadata. If it once contained dirty data, other writes might overwrite it 141 * later, leaving no valid pointers into that bucket in the index. 142 * 143 * Thus, the primary purpose of garbage collection is to find buckets to reuse. 144 * It also counts how much valid data it each bucket currently contains, so that 145 * allocation can reuse buckets sooner when they've been mostly overwritten. 146 * 147 * It also does some things that are really internal to the btree 148 * implementation. If a btree node contains pointers that are stale by more than 149 * some threshold, it rewrites the btree node to avoid the bucket's generation 150 * wrapping around. It also merges adjacent btree nodes if they're empty enough. 151 * 152 * THE JOURNAL: 153 * 154 * Bcache's journal is not necessary for consistency; we always strictly 155 * order metadata writes so that the btree and everything else is consistent on 156 * disk in the event of an unclean shutdown, and in fact bcache had writeback 157 * caching (with recovery from unclean shutdown) before journalling was 158 * implemented. 159 * 160 * Rather, the journal is purely a performance optimization; we can't complete a 161 * write until we've updated the index on disk, otherwise the cache would be 162 * inconsistent in the event of an unclean shutdown. This means that without the 163 * journal, on random write workloads we constantly have to update all the leaf 164 * nodes in the btree, and those writes will be mostly empty (appending at most 165 * a few keys each) - highly inefficient in terms of amount of metadata writes, 166 * and it puts more strain on the various btree resorting/compacting code. 167 * 168 * The journal is just a log of keys we've inserted; on startup we just reinsert 169 * all the keys in the open journal entries. That means that when we're updating 170 * a node in the btree, we can wait until a 4k block of keys fills up before 171 * writing them out. 172 * 173 * For simplicity, we only journal updates to leaf nodes; updates to parent 174 * nodes are rare enough (since our leaf nodes are huge) that it wasn't worth 175 * the complexity to deal with journalling them (in particular, journal replay) 176 * - updates to non leaf nodes just happen synchronously (see btree_split()). 177 */ 178 179 #define pr_fmt(fmt) "bcache: %s() " fmt "\n", __func__ 180 181 #include <linux/bcache.h> 182 #include <linux/bio.h> 183 #include <linux/kobject.h> 184 #include <linux/list.h> 185 #include <linux/mutex.h> 186 #include <linux/rbtree.h> 187 #include <linux/rwsem.h> 188 #include <linux/refcount.h> 189 #include <linux/types.h> 190 #include <linux/workqueue.h> 191 #include <linux/kthread.h> 192 193 #include "bset.h" 194 #include "util.h" 195 #include "closure.h" 196 197 struct bucket { 198 atomic_t pin; 199 uint16_t prio; 200 uint8_t gen; 201 uint8_t last_gc; /* Most out of date gen in the btree */ 202 uint16_t gc_mark; /* Bitfield used by GC. See below for field */ 203 }; 204 205 /* 206 * I'd use bitfields for these, but I don't trust the compiler not to screw me 207 * as multiple threads touch struct bucket without locking 208 */ 209 210 BITMASK(GC_MARK, struct bucket, gc_mark, 0, 2); 211 #define GC_MARK_RECLAIMABLE 1 212 #define GC_MARK_DIRTY 2 213 #define GC_MARK_METADATA 3 214 #define GC_SECTORS_USED_SIZE 13 215 #define MAX_GC_SECTORS_USED (~(~0ULL << GC_SECTORS_USED_SIZE)) 216 BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, GC_SECTORS_USED_SIZE); 217 BITMASK(GC_MOVE, struct bucket, gc_mark, 15, 1); 218 219 #include "journal.h" 220 #include "stats.h" 221 struct search; 222 struct btree; 223 struct keybuf; 224 225 struct keybuf_key { 226 struct rb_node node; 227 BKEY_PADDED(key); 228 void *private; 229 }; 230 231 struct keybuf { 232 struct bkey last_scanned; 233 spinlock_t lock; 234 235 /* 236 * Beginning and end of range in rb tree - so that we can skip taking 237 * lock and checking the rb tree when we need to check for overlapping 238 * keys. 239 */ 240 struct bkey start; 241 struct bkey end; 242 243 struct rb_root keys; 244 245 #define KEYBUF_NR 500 246 DECLARE_ARRAY_ALLOCATOR(struct keybuf_key, freelist, KEYBUF_NR); 247 }; 248 249 struct bcache_device { 250 struct closure cl; 251 252 struct kobject kobj; 253 254 struct cache_set *c; 255 unsigned id; 256 #define BCACHEDEVNAME_SIZE 12 257 char name[BCACHEDEVNAME_SIZE]; 258 259 struct gendisk *disk; 260 261 unsigned long flags; 262 #define BCACHE_DEV_CLOSING 0 263 #define BCACHE_DEV_DETACHING 1 264 #define BCACHE_DEV_UNLINK_DONE 2 265 #define BCACHE_DEV_WB_RUNNING 3 266 #define BCACHE_DEV_RATE_DW_RUNNING 4 267 unsigned nr_stripes; 268 unsigned stripe_size; 269 atomic_t *stripe_sectors_dirty; 270 unsigned long *full_dirty_stripes; 271 272 struct bio_set bio_split; 273 274 unsigned data_csum:1; 275 276 int (*cache_miss)(struct btree *, struct search *, 277 struct bio *, unsigned); 278 int (*ioctl) (struct bcache_device *, fmode_t, unsigned, unsigned long); 279 }; 280 281 struct io { 282 /* Used to track sequential IO so it can be skipped */ 283 struct hlist_node hash; 284 struct list_head lru; 285 286 unsigned long jiffies; 287 unsigned sequential; 288 sector_t last; 289 }; 290 291 enum stop_on_failure { 292 BCH_CACHED_DEV_STOP_AUTO = 0, 293 BCH_CACHED_DEV_STOP_ALWAYS, 294 BCH_CACHED_DEV_STOP_MODE_MAX, 295 }; 296 297 struct cached_dev { 298 struct list_head list; 299 struct bcache_device disk; 300 struct block_device *bdev; 301 302 struct cache_sb sb; 303 struct bio sb_bio; 304 struct bio_vec sb_bv[1]; 305 struct closure sb_write; 306 struct semaphore sb_write_mutex; 307 308 /* Refcount on the cache set. Always nonzero when we're caching. */ 309 refcount_t count; 310 struct work_struct detach; 311 312 /* 313 * Device might not be running if it's dirty and the cache set hasn't 314 * showed up yet. 315 */ 316 atomic_t running; 317 318 /* 319 * Writes take a shared lock from start to finish; scanning for dirty 320 * data to refill the rb tree requires an exclusive lock. 321 */ 322 struct rw_semaphore writeback_lock; 323 324 /* 325 * Nonzero, and writeback has a refcount (d->count), iff there is dirty 326 * data in the cache. Protected by writeback_lock; must have an 327 * shared lock to set and exclusive lock to clear. 328 */ 329 atomic_t has_dirty; 330 331 /* 332 * Set to zero by things that touch the backing volume-- except 333 * writeback. Incremented by writeback. Used to determine when to 334 * accelerate idle writeback. 335 */ 336 atomic_t backing_idle; 337 338 struct bch_ratelimit writeback_rate; 339 struct delayed_work writeback_rate_update; 340 341 /* Limit number of writeback bios in flight */ 342 struct semaphore in_flight; 343 struct task_struct *writeback_thread; 344 struct workqueue_struct *writeback_write_wq; 345 346 struct keybuf writeback_keys; 347 348 struct task_struct *status_update_thread; 349 /* 350 * Order the write-half of writeback operations strongly in dispatch 351 * order. (Maintain LBA order; don't allow reads completing out of 352 * order to re-order the writes...) 353 */ 354 struct closure_waitlist writeback_ordering_wait; 355 atomic_t writeback_sequence_next; 356 357 /* For tracking sequential IO */ 358 #define RECENT_IO_BITS 7 359 #define RECENT_IO (1 << RECENT_IO_BITS) 360 struct io io[RECENT_IO]; 361 struct hlist_head io_hash[RECENT_IO + 1]; 362 struct list_head io_lru; 363 spinlock_t io_lock; 364 365 struct cache_accounting accounting; 366 367 /* The rest of this all shows up in sysfs */ 368 unsigned sequential_cutoff; 369 unsigned readahead; 370 371 unsigned io_disable:1; 372 unsigned verify:1; 373 unsigned bypass_torture_test:1; 374 375 unsigned partial_stripes_expensive:1; 376 unsigned writeback_metadata:1; 377 unsigned writeback_running:1; 378 unsigned char writeback_percent; 379 unsigned writeback_delay; 380 381 uint64_t writeback_rate_target; 382 int64_t writeback_rate_proportional; 383 int64_t writeback_rate_integral; 384 int64_t writeback_rate_integral_scaled; 385 int32_t writeback_rate_change; 386 387 unsigned writeback_rate_update_seconds; 388 unsigned writeback_rate_i_term_inverse; 389 unsigned writeback_rate_p_term_inverse; 390 unsigned writeback_rate_minimum; 391 392 enum stop_on_failure stop_when_cache_set_failed; 393 #define DEFAULT_CACHED_DEV_ERROR_LIMIT 64 394 atomic_t io_errors; 395 unsigned error_limit; 396 unsigned offline_seconds; 397 398 char backing_dev_name[BDEVNAME_SIZE]; 399 }; 400 401 enum alloc_reserve { 402 RESERVE_BTREE, 403 RESERVE_PRIO, 404 RESERVE_MOVINGGC, 405 RESERVE_NONE, 406 RESERVE_NR, 407 }; 408 409 struct cache { 410 struct cache_set *set; 411 struct cache_sb sb; 412 struct bio sb_bio; 413 struct bio_vec sb_bv[1]; 414 415 struct kobject kobj; 416 struct block_device *bdev; 417 418 struct task_struct *alloc_thread; 419 420 struct closure prio; 421 struct prio_set *disk_buckets; 422 423 /* 424 * When allocating new buckets, prio_write() gets first dibs - since we 425 * may not be allocate at all without writing priorities and gens. 426 * prio_buckets[] contains the last buckets we wrote priorities to (so 427 * gc can mark them as metadata), prio_next[] contains the buckets 428 * allocated for the next prio write. 429 */ 430 uint64_t *prio_buckets; 431 uint64_t *prio_last_buckets; 432 433 /* 434 * free: Buckets that are ready to be used 435 * 436 * free_inc: Incoming buckets - these are buckets that currently have 437 * cached data in them, and we can't reuse them until after we write 438 * their new gen to disk. After prio_write() finishes writing the new 439 * gens/prios, they'll be moved to the free list (and possibly discarded 440 * in the process) 441 */ 442 DECLARE_FIFO(long, free)[RESERVE_NR]; 443 DECLARE_FIFO(long, free_inc); 444 445 size_t fifo_last_bucket; 446 447 /* Allocation stuff: */ 448 struct bucket *buckets; 449 450 DECLARE_HEAP(struct bucket *, heap); 451 452 /* 453 * If nonzero, we know we aren't going to find any buckets to invalidate 454 * until a gc finishes - otherwise we could pointlessly burn a ton of 455 * cpu 456 */ 457 unsigned invalidate_needs_gc; 458 459 bool discard; /* Get rid of? */ 460 461 struct journal_device journal; 462 463 /* The rest of this all shows up in sysfs */ 464 #define IO_ERROR_SHIFT 20 465 atomic_t io_errors; 466 atomic_t io_count; 467 468 atomic_long_t meta_sectors_written; 469 atomic_long_t btree_sectors_written; 470 atomic_long_t sectors_written; 471 472 char cache_dev_name[BDEVNAME_SIZE]; 473 }; 474 475 struct gc_stat { 476 size_t nodes; 477 size_t key_bytes; 478 479 size_t nkeys; 480 uint64_t data; /* sectors */ 481 unsigned in_use; /* percent */ 482 }; 483 484 /* 485 * Flag bits, for how the cache set is shutting down, and what phase it's at: 486 * 487 * CACHE_SET_UNREGISTERING means we're not just shutting down, we're detaching 488 * all the backing devices first (their cached data gets invalidated, and they 489 * won't automatically reattach). 490 * 491 * CACHE_SET_STOPPING always gets set first when we're closing down a cache set; 492 * we'll continue to run normally for awhile with CACHE_SET_STOPPING set (i.e. 493 * flushing dirty data). 494 * 495 * CACHE_SET_RUNNING means all cache devices have been registered and journal 496 * replay is complete. 497 * 498 * CACHE_SET_IO_DISABLE is set when bcache is stopping the whold cache set, all 499 * external and internal I/O should be denied when this flag is set. 500 * 501 */ 502 #define CACHE_SET_UNREGISTERING 0 503 #define CACHE_SET_STOPPING 1 504 #define CACHE_SET_RUNNING 2 505 #define CACHE_SET_IO_DISABLE 3 506 507 struct cache_set { 508 struct closure cl; 509 510 struct list_head list; 511 struct kobject kobj; 512 struct kobject internal; 513 struct dentry *debug; 514 struct cache_accounting accounting; 515 516 unsigned long flags; 517 518 struct cache_sb sb; 519 520 struct cache *cache[MAX_CACHES_PER_SET]; 521 struct cache *cache_by_alloc[MAX_CACHES_PER_SET]; 522 int caches_loaded; 523 524 struct bcache_device **devices; 525 unsigned devices_max_used; 526 struct list_head cached_devs; 527 uint64_t cached_dev_sectors; 528 struct closure caching; 529 530 struct closure sb_write; 531 struct semaphore sb_write_mutex; 532 533 mempool_t search; 534 mempool_t bio_meta; 535 struct bio_set bio_split; 536 537 /* For the btree cache */ 538 struct shrinker shrink; 539 540 /* For the btree cache and anything allocation related */ 541 struct mutex bucket_lock; 542 543 /* log2(bucket_size), in sectors */ 544 unsigned short bucket_bits; 545 546 /* log2(block_size), in sectors */ 547 unsigned short block_bits; 548 549 /* 550 * Default number of pages for a new btree node - may be less than a 551 * full bucket 552 */ 553 unsigned btree_pages; 554 555 /* 556 * Lists of struct btrees; lru is the list for structs that have memory 557 * allocated for actual btree node, freed is for structs that do not. 558 * 559 * We never free a struct btree, except on shutdown - we just put it on 560 * the btree_cache_freed list and reuse it later. This simplifies the 561 * code, and it doesn't cost us much memory as the memory usage is 562 * dominated by buffers that hold the actual btree node data and those 563 * can be freed - and the number of struct btrees allocated is 564 * effectively bounded. 565 * 566 * btree_cache_freeable effectively is a small cache - we use it because 567 * high order page allocations can be rather expensive, and it's quite 568 * common to delete and allocate btree nodes in quick succession. It 569 * should never grow past ~2-3 nodes in practice. 570 */ 571 struct list_head btree_cache; 572 struct list_head btree_cache_freeable; 573 struct list_head btree_cache_freed; 574 575 /* Number of elements in btree_cache + btree_cache_freeable lists */ 576 unsigned btree_cache_used; 577 578 /* 579 * If we need to allocate memory for a new btree node and that 580 * allocation fails, we can cannibalize another node in the btree cache 581 * to satisfy the allocation - lock to guarantee only one thread does 582 * this at a time: 583 */ 584 wait_queue_head_t btree_cache_wait; 585 struct task_struct *btree_cache_alloc_lock; 586 587 /* 588 * When we free a btree node, we increment the gen of the bucket the 589 * node is in - but we can't rewrite the prios and gens until we 590 * finished whatever it is we were doing, otherwise after a crash the 591 * btree node would be freed but for say a split, we might not have the 592 * pointers to the new nodes inserted into the btree yet. 593 * 594 * This is a refcount that blocks prio_write() until the new keys are 595 * written. 596 */ 597 atomic_t prio_blocked; 598 wait_queue_head_t bucket_wait; 599 600 /* 601 * For any bio we don't skip we subtract the number of sectors from 602 * rescale; when it hits 0 we rescale all the bucket priorities. 603 */ 604 atomic_t rescale; 605 /* 606 * When we invalidate buckets, we use both the priority and the amount 607 * of good data to determine which buckets to reuse first - to weight 608 * those together consistently we keep track of the smallest nonzero 609 * priority of any bucket. 610 */ 611 uint16_t min_prio; 612 613 /* 614 * max(gen - last_gc) for all buckets. When it gets too big we have to gc 615 * to keep gens from wrapping around. 616 */ 617 uint8_t need_gc; 618 struct gc_stat gc_stats; 619 size_t nbuckets; 620 size_t avail_nbuckets; 621 622 struct task_struct *gc_thread; 623 /* Where in the btree gc currently is */ 624 struct bkey gc_done; 625 626 /* 627 * The allocation code needs gc_mark in struct bucket to be correct, but 628 * it's not while a gc is in progress. Protected by bucket_lock. 629 */ 630 int gc_mark_valid; 631 632 /* Counts how many sectors bio_insert has added to the cache */ 633 atomic_t sectors_to_gc; 634 wait_queue_head_t gc_wait; 635 636 struct keybuf moving_gc_keys; 637 /* Number of moving GC bios in flight */ 638 struct semaphore moving_in_flight; 639 640 struct workqueue_struct *moving_gc_wq; 641 642 struct btree *root; 643 644 #ifdef CONFIG_BCACHE_DEBUG 645 struct btree *verify_data; 646 struct bset *verify_ondisk; 647 struct mutex verify_lock; 648 #endif 649 650 unsigned nr_uuids; 651 struct uuid_entry *uuids; 652 BKEY_PADDED(uuid_bucket); 653 struct closure uuid_write; 654 struct semaphore uuid_write_mutex; 655 656 /* 657 * A btree node on disk could have too many bsets for an iterator to fit 658 * on the stack - have to dynamically allocate them 659 */ 660 mempool_t fill_iter; 661 662 struct bset_sort_state sort; 663 664 /* List of buckets we're currently writing data to */ 665 struct list_head data_buckets; 666 spinlock_t data_bucket_lock; 667 668 struct journal journal; 669 670 #define CONGESTED_MAX 1024 671 unsigned congested_last_us; 672 atomic_t congested; 673 674 /* The rest of this all shows up in sysfs */ 675 unsigned congested_read_threshold_us; 676 unsigned congested_write_threshold_us; 677 678 struct time_stats btree_gc_time; 679 struct time_stats btree_split_time; 680 struct time_stats btree_read_time; 681 682 atomic_long_t cache_read_races; 683 atomic_long_t writeback_keys_done; 684 atomic_long_t writeback_keys_failed; 685 686 atomic_long_t reclaim; 687 atomic_long_t flush_write; 688 atomic_long_t retry_flush_write; 689 690 enum { 691 ON_ERROR_UNREGISTER, 692 ON_ERROR_PANIC, 693 } on_error; 694 #define DEFAULT_IO_ERROR_LIMIT 8 695 unsigned error_limit; 696 unsigned error_decay; 697 698 unsigned short journal_delay_ms; 699 bool expensive_debug_checks; 700 unsigned verify:1; 701 unsigned key_merging_disabled:1; 702 unsigned gc_always_rewrite:1; 703 unsigned shrinker_disabled:1; 704 unsigned copy_gc_enabled:1; 705 706 #define BUCKET_HASH_BITS 12 707 struct hlist_head bucket_hash[1 << BUCKET_HASH_BITS]; 708 709 DECLARE_HEAP(struct btree *, flush_btree); 710 }; 711 712 struct bbio { 713 unsigned submit_time_us; 714 union { 715 struct bkey key; 716 uint64_t _pad[3]; 717 /* 718 * We only need pad = 3 here because we only ever carry around a 719 * single pointer - i.e. the pointer we're doing io to/from. 720 */ 721 }; 722 struct bio bio; 723 }; 724 725 #define BTREE_PRIO USHRT_MAX 726 #define INITIAL_PRIO 32768U 727 728 #define btree_bytes(c) ((c)->btree_pages * PAGE_SIZE) 729 #define btree_blocks(b) \ 730 ((unsigned) (KEY_SIZE(&b->key) >> (b)->c->block_bits)) 731 732 #define btree_default_blocks(c) \ 733 ((unsigned) ((PAGE_SECTORS * (c)->btree_pages) >> (c)->block_bits)) 734 735 #define bucket_pages(c) ((c)->sb.bucket_size / PAGE_SECTORS) 736 #define bucket_bytes(c) ((c)->sb.bucket_size << 9) 737 #define block_bytes(c) ((c)->sb.block_size << 9) 738 739 #define prios_per_bucket(c) \ 740 ((bucket_bytes(c) - sizeof(struct prio_set)) / \ 741 sizeof(struct bucket_disk)) 742 #define prio_buckets(c) \ 743 DIV_ROUND_UP((size_t) (c)->sb.nbuckets, prios_per_bucket(c)) 744 745 static inline size_t sector_to_bucket(struct cache_set *c, sector_t s) 746 { 747 return s >> c->bucket_bits; 748 } 749 750 static inline sector_t bucket_to_sector(struct cache_set *c, size_t b) 751 { 752 return ((sector_t) b) << c->bucket_bits; 753 } 754 755 static inline sector_t bucket_remainder(struct cache_set *c, sector_t s) 756 { 757 return s & (c->sb.bucket_size - 1); 758 } 759 760 static inline struct cache *PTR_CACHE(struct cache_set *c, 761 const struct bkey *k, 762 unsigned ptr) 763 { 764 return c->cache[PTR_DEV(k, ptr)]; 765 } 766 767 static inline size_t PTR_BUCKET_NR(struct cache_set *c, 768 const struct bkey *k, 769 unsigned ptr) 770 { 771 return sector_to_bucket(c, PTR_OFFSET(k, ptr)); 772 } 773 774 static inline struct bucket *PTR_BUCKET(struct cache_set *c, 775 const struct bkey *k, 776 unsigned ptr) 777 { 778 return PTR_CACHE(c, k, ptr)->buckets + PTR_BUCKET_NR(c, k, ptr); 779 } 780 781 static inline uint8_t gen_after(uint8_t a, uint8_t b) 782 { 783 uint8_t r = a - b; 784 return r > 128U ? 0 : r; 785 } 786 787 static inline uint8_t ptr_stale(struct cache_set *c, const struct bkey *k, 788 unsigned i) 789 { 790 return gen_after(PTR_BUCKET(c, k, i)->gen, PTR_GEN(k, i)); 791 } 792 793 static inline bool ptr_available(struct cache_set *c, const struct bkey *k, 794 unsigned i) 795 { 796 return (PTR_DEV(k, i) < MAX_CACHES_PER_SET) && PTR_CACHE(c, k, i); 797 } 798 799 /* Btree key macros */ 800 801 /* 802 * This is used for various on disk data structures - cache_sb, prio_set, bset, 803 * jset: The checksum is _always_ the first 8 bytes of these structs 804 */ 805 #define csum_set(i) \ 806 bch_crc64(((void *) (i)) + sizeof(uint64_t), \ 807 ((void *) bset_bkey_last(i)) - \ 808 (((void *) (i)) + sizeof(uint64_t))) 809 810 /* Error handling macros */ 811 812 #define btree_bug(b, ...) \ 813 do { \ 814 if (bch_cache_set_error((b)->c, __VA_ARGS__)) \ 815 dump_stack(); \ 816 } while (0) 817 818 #define cache_bug(c, ...) \ 819 do { \ 820 if (bch_cache_set_error(c, __VA_ARGS__)) \ 821 dump_stack(); \ 822 } while (0) 823 824 #define btree_bug_on(cond, b, ...) \ 825 do { \ 826 if (cond) \ 827 btree_bug(b, __VA_ARGS__); \ 828 } while (0) 829 830 #define cache_bug_on(cond, c, ...) \ 831 do { \ 832 if (cond) \ 833 cache_bug(c, __VA_ARGS__); \ 834 } while (0) 835 836 #define cache_set_err_on(cond, c, ...) \ 837 do { \ 838 if (cond) \ 839 bch_cache_set_error(c, __VA_ARGS__); \ 840 } while (0) 841 842 /* Looping macros */ 843 844 #define for_each_cache(ca, cs, iter) \ 845 for (iter = 0; ca = cs->cache[iter], iter < (cs)->sb.nr_in_set; iter++) 846 847 #define for_each_bucket(b, ca) \ 848 for (b = (ca)->buckets + (ca)->sb.first_bucket; \ 849 b < (ca)->buckets + (ca)->sb.nbuckets; b++) 850 851 static inline void cached_dev_put(struct cached_dev *dc) 852 { 853 if (refcount_dec_and_test(&dc->count)) 854 schedule_work(&dc->detach); 855 } 856 857 static inline bool cached_dev_get(struct cached_dev *dc) 858 { 859 if (!refcount_inc_not_zero(&dc->count)) 860 return false; 861 862 /* Paired with the mb in cached_dev_attach */ 863 smp_mb__after_atomic(); 864 return true; 865 } 866 867 /* 868 * bucket_gc_gen() returns the difference between the bucket's current gen and 869 * the oldest gen of any pointer into that bucket in the btree (last_gc). 870 */ 871 872 static inline uint8_t bucket_gc_gen(struct bucket *b) 873 { 874 return b->gen - b->last_gc; 875 } 876 877 #define BUCKET_GC_GEN_MAX 96U 878 879 #define kobj_attribute_write(n, fn) \ 880 static struct kobj_attribute ksysfs_##n = __ATTR(n, S_IWUSR, NULL, fn) 881 882 #define kobj_attribute_rw(n, show, store) \ 883 static struct kobj_attribute ksysfs_##n = \ 884 __ATTR(n, S_IWUSR|S_IRUSR, show, store) 885 886 static inline void wake_up_allocators(struct cache_set *c) 887 { 888 struct cache *ca; 889 unsigned i; 890 891 for_each_cache(ca, c, i) 892 wake_up_process(ca->alloc_thread); 893 } 894 895 static inline void closure_bio_submit(struct cache_set *c, 896 struct bio *bio, 897 struct closure *cl) 898 { 899 closure_get(cl); 900 if (unlikely(test_bit(CACHE_SET_IO_DISABLE, &c->flags))) { 901 bio->bi_status = BLK_STS_IOERR; 902 bio_endio(bio); 903 return; 904 } 905 generic_make_request(bio); 906 } 907 908 /* 909 * Prevent the kthread exits directly, and make sure when kthread_stop() 910 * is called to stop a kthread, it is still alive. If a kthread might be 911 * stopped by CACHE_SET_IO_DISABLE bit set, wait_for_kthread_stop() is 912 * necessary before the kthread returns. 913 */ 914 static inline void wait_for_kthread_stop(void) 915 { 916 while (!kthread_should_stop()) { 917 set_current_state(TASK_INTERRUPTIBLE); 918 schedule(); 919 } 920 } 921 922 /* Forward declarations */ 923 924 void bch_count_backing_io_errors(struct cached_dev *dc, struct bio *bio); 925 void bch_count_io_errors(struct cache *, blk_status_t, int, const char *); 926 void bch_bbio_count_io_errors(struct cache_set *, struct bio *, 927 blk_status_t, const char *); 928 void bch_bbio_endio(struct cache_set *, struct bio *, blk_status_t, 929 const char *); 930 void bch_bbio_free(struct bio *, struct cache_set *); 931 struct bio *bch_bbio_alloc(struct cache_set *); 932 933 void __bch_submit_bbio(struct bio *, struct cache_set *); 934 void bch_submit_bbio(struct bio *, struct cache_set *, struct bkey *, unsigned); 935 936 uint8_t bch_inc_gen(struct cache *, struct bucket *); 937 void bch_rescale_priorities(struct cache_set *, int); 938 939 bool bch_can_invalidate_bucket(struct cache *, struct bucket *); 940 void __bch_invalidate_one_bucket(struct cache *, struct bucket *); 941 942 void __bch_bucket_free(struct cache *, struct bucket *); 943 void bch_bucket_free(struct cache_set *, struct bkey *); 944 945 long bch_bucket_alloc(struct cache *, unsigned, bool); 946 int __bch_bucket_alloc_set(struct cache_set *, unsigned, 947 struct bkey *, int, bool); 948 int bch_bucket_alloc_set(struct cache_set *, unsigned, 949 struct bkey *, int, bool); 950 bool bch_alloc_sectors(struct cache_set *, struct bkey *, unsigned, 951 unsigned, unsigned, bool); 952 bool bch_cached_dev_error(struct cached_dev *dc); 953 954 __printf(2, 3) 955 bool bch_cache_set_error(struct cache_set *, const char *, ...); 956 957 void bch_prio_write(struct cache *); 958 void bch_write_bdev_super(struct cached_dev *, struct closure *); 959 960 extern struct workqueue_struct *bcache_wq; 961 extern struct mutex bch_register_lock; 962 extern struct list_head bch_cache_sets; 963 964 extern struct kobj_type bch_cached_dev_ktype; 965 extern struct kobj_type bch_flash_dev_ktype; 966 extern struct kobj_type bch_cache_set_ktype; 967 extern struct kobj_type bch_cache_set_internal_ktype; 968 extern struct kobj_type bch_cache_ktype; 969 970 void bch_cached_dev_release(struct kobject *); 971 void bch_flash_dev_release(struct kobject *); 972 void bch_cache_set_release(struct kobject *); 973 void bch_cache_release(struct kobject *); 974 975 int bch_uuid_write(struct cache_set *); 976 void bcache_write_super(struct cache_set *); 977 978 int bch_flash_dev_create(struct cache_set *c, uint64_t size); 979 980 int bch_cached_dev_attach(struct cached_dev *, struct cache_set *, uint8_t *); 981 void bch_cached_dev_detach(struct cached_dev *); 982 void bch_cached_dev_run(struct cached_dev *); 983 void bcache_device_stop(struct bcache_device *); 984 985 void bch_cache_set_unregister(struct cache_set *); 986 void bch_cache_set_stop(struct cache_set *); 987 988 struct cache_set *bch_cache_set_alloc(struct cache_sb *); 989 void bch_btree_cache_free(struct cache_set *); 990 int bch_btree_cache_alloc(struct cache_set *); 991 void bch_moving_init_cache_set(struct cache_set *); 992 int bch_open_buckets_alloc(struct cache_set *); 993 void bch_open_buckets_free(struct cache_set *); 994 995 int bch_cache_allocator_start(struct cache *ca); 996 997 void bch_debug_exit(void); 998 int bch_debug_init(struct kobject *); 999 void bch_request_exit(void); 1000 int bch_request_init(void); 1001 1002 #endif /* _BCACHE_H */ 1003