xref: /openbmc/linux/drivers/mailbox/pcc.c (revision d9fd5a71)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *	Copyright (C) 2014 Linaro Ltd.
4  *	Author:	Ashwin Chaugule <ashwin.chaugule@linaro.org>
5  *
6  *  PCC (Platform Communication Channel) is defined in the ACPI 5.0+
7  *  specification. It is a mailbox like mechanism to allow clients
8  *  such as CPPC (Collaborative Processor Performance Control), RAS
9  *  (Reliability, Availability and Serviceability) and MPST (Memory
10  *  Node Power State Table) to talk to the platform (e.g. BMC) through
11  *  shared memory regions as defined in the PCC table entries. The PCC
12  *  specification supports a Doorbell mechanism for the PCC clients
13  *  to notify the platform about new data. This Doorbell information
14  *  is also specified in each PCC table entry.
15  *
16  *  Typical high level flow of operation is:
17  *
18  *  PCC Reads:
19  *  * Client tries to acquire a channel lock.
20  *  * After it is acquired it writes READ cmd in communication region cmd
21  *		address.
22  *  * Client issues mbox_send_message() which rings the PCC doorbell
23  *		for its PCC channel.
24  *  * If command completes, then client has control over channel and
25  *		it can proceed with its reads.
26  *  * Client releases lock.
27  *
28  *  PCC Writes:
29  *  * Client tries to acquire channel lock.
30  *  * Client writes to its communication region after it acquires a
31  *		channel lock.
32  *  * Client writes WRITE cmd in communication region cmd address.
33  *  * Client issues mbox_send_message() which rings the PCC doorbell
34  *		for its PCC channel.
35  *  * If command completes, then writes have succeded and it can release
36  *		the channel lock.
37  *
38  *  There is a Nominal latency defined for each channel which indicates
39  *  how long to wait until a command completes. If command is not complete
40  *  the client needs to retry or assume failure.
41  *
42  *	For more details about PCC, please see the ACPI specification from
43  *  http://www.uefi.org/ACPIv5.1 Section 14.
44  *
45  *  This file implements PCC as a Mailbox controller and allows for PCC
46  *  clients to be implemented as its Mailbox Client Channels.
47  */
48 
49 #include <linux/acpi.h>
50 #include <linux/delay.h>
51 #include <linux/io.h>
52 #include <linux/init.h>
53 #include <linux/interrupt.h>
54 #include <linux/list.h>
55 #include <linux/platform_device.h>
56 #include <linux/mailbox_controller.h>
57 #include <linux/mailbox_client.h>
58 #include <linux/io-64-nonatomic-lo-hi.h>
59 #include <acpi/pcc.h>
60 
61 #include "mailbox.h"
62 
63 #define MBOX_IRQ_NAME		"pcc-mbox"
64 
65 static struct mbox_chan *pcc_mbox_channels;
66 
67 /* Array of cached virtual address for doorbell registers */
68 static void __iomem **pcc_doorbell_vaddr;
69 /* Array of cached virtual address for doorbell ack registers */
70 static void __iomem **pcc_doorbell_ack_vaddr;
71 /* Array of doorbell interrupts */
72 static int *pcc_doorbell_irq;
73 
74 static struct mbox_controller pcc_mbox_ctrl = {};
75 /**
76  * get_pcc_channel - Given a PCC subspace idx, get
77  *	the respective mbox_channel.
78  * @id: PCC subspace index.
79  *
80  * Return: ERR_PTR(errno) if error, else pointer
81  *	to mbox channel.
82  */
83 static struct mbox_chan *get_pcc_channel(int id)
84 {
85 	if (id < 0 || id >= pcc_mbox_ctrl.num_chans)
86 		return ERR_PTR(-ENOENT);
87 
88 	return &pcc_mbox_channels[id];
89 }
90 
91 /*
92  * PCC can be used with perf critical drivers such as CPPC
93  * So it makes sense to locally cache the virtual address and
94  * use it to read/write to PCC registers such as doorbell register
95  *
96  * The below read_register and write_registers are used to read and
97  * write from perf critical registers such as PCC doorbell register
98  */
99 static int read_register(void __iomem *vaddr, u64 *val, unsigned int bit_width)
100 {
101 	int ret_val = 0;
102 
103 	switch (bit_width) {
104 	case 8:
105 		*val = readb(vaddr);
106 		break;
107 	case 16:
108 		*val = readw(vaddr);
109 		break;
110 	case 32:
111 		*val = readl(vaddr);
112 		break;
113 	case 64:
114 		*val = readq(vaddr);
115 		break;
116 	default:
117 		pr_debug("Error: Cannot read register of %u bit width",
118 			bit_width);
119 		ret_val = -EFAULT;
120 		break;
121 	}
122 	return ret_val;
123 }
124 
125 static int write_register(void __iomem *vaddr, u64 val, unsigned int bit_width)
126 {
127 	int ret_val = 0;
128 
129 	switch (bit_width) {
130 	case 8:
131 		writeb(val, vaddr);
132 		break;
133 	case 16:
134 		writew(val, vaddr);
135 		break;
136 	case 32:
137 		writel(val, vaddr);
138 		break;
139 	case 64:
140 		writeq(val, vaddr);
141 		break;
142 	default:
143 		pr_debug("Error: Cannot write register of %u bit width",
144 			bit_width);
145 		ret_val = -EFAULT;
146 		break;
147 	}
148 	return ret_val;
149 }
150 
151 /**
152  * pcc_map_interrupt - Map a PCC subspace GSI to a linux IRQ number
153  * @interrupt: GSI number.
154  * @flags: interrupt flags
155  *
156  * Returns: a valid linux IRQ number on success
157  *		0 or -EINVAL on failure
158  */
159 static int pcc_map_interrupt(u32 interrupt, u32 flags)
160 {
161 	int trigger, polarity;
162 
163 	if (!interrupt)
164 		return 0;
165 
166 	trigger = (flags & ACPI_PCCT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
167 			: ACPI_LEVEL_SENSITIVE;
168 
169 	polarity = (flags & ACPI_PCCT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
170 			: ACPI_ACTIVE_HIGH;
171 
172 	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
173 }
174 
175 /**
176  * pcc_mbox_irq - PCC mailbox interrupt handler
177  */
178 static irqreturn_t pcc_mbox_irq(int irq, void *p)
179 {
180 	struct acpi_generic_address *doorbell_ack;
181 	struct acpi_pcct_hw_reduced *pcct_ss;
182 	struct mbox_chan *chan = p;
183 	u64 doorbell_ack_preserve;
184 	u64 doorbell_ack_write;
185 	u64 doorbell_ack_val;
186 	int ret;
187 
188 	pcct_ss = chan->con_priv;
189 
190 	mbox_chan_received_data(chan, NULL);
191 
192 	if (pcct_ss->header.type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
193 		struct acpi_pcct_hw_reduced_type2 *pcct2_ss = chan->con_priv;
194 		u32 id = chan - pcc_mbox_channels;
195 
196 		doorbell_ack = &pcct2_ss->platform_ack_register;
197 		doorbell_ack_preserve = pcct2_ss->ack_preserve_mask;
198 		doorbell_ack_write = pcct2_ss->ack_write_mask;
199 
200 		ret = read_register(pcc_doorbell_ack_vaddr[id],
201 				    &doorbell_ack_val,
202 				    doorbell_ack->bit_width);
203 		if (ret)
204 			return IRQ_NONE;
205 
206 		ret = write_register(pcc_doorbell_ack_vaddr[id],
207 				     (doorbell_ack_val & doorbell_ack_preserve)
208 					| doorbell_ack_write,
209 				     doorbell_ack->bit_width);
210 		if (ret)
211 			return IRQ_NONE;
212 	}
213 
214 	return IRQ_HANDLED;
215 }
216 
217 /**
218  * pcc_mbox_request_channel - PCC clients call this function to
219  *		request a pointer to their PCC subspace, from which they
220  *		can get the details of communicating with the remote.
221  * @cl: Pointer to Mailbox client, so we know where to bind the
222  *		Channel.
223  * @subspace_id: The PCC Subspace index as parsed in the PCC client
224  *		ACPI package. This is used to lookup the array of PCC
225  *		subspaces as parsed by the PCC Mailbox controller.
226  *
227  * Return: Pointer to the Mailbox Channel if successful or
228  *		ERR_PTR.
229  */
230 struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl,
231 		int subspace_id)
232 {
233 	struct device *dev = pcc_mbox_ctrl.dev;
234 	struct mbox_chan *chan;
235 	unsigned long flags;
236 
237 	/*
238 	 * Each PCC Subspace is a Mailbox Channel.
239 	 * The PCC Clients get their PCC Subspace ID
240 	 * from their own tables and pass it here.
241 	 * This returns a pointer to the PCC subspace
242 	 * for the Client to operate on.
243 	 */
244 	chan = get_pcc_channel(subspace_id);
245 
246 	if (IS_ERR(chan) || chan->cl) {
247 		dev_err(dev, "Channel not found for idx: %d\n", subspace_id);
248 		return ERR_PTR(-EBUSY);
249 	}
250 
251 	spin_lock_irqsave(&chan->lock, flags);
252 	chan->msg_free = 0;
253 	chan->msg_count = 0;
254 	chan->active_req = NULL;
255 	chan->cl = cl;
256 	init_completion(&chan->tx_complete);
257 
258 	if (chan->txdone_method == TXDONE_BY_POLL && cl->knows_txdone)
259 		chan->txdone_method = TXDONE_BY_ACK;
260 
261 	spin_unlock_irqrestore(&chan->lock, flags);
262 
263 	if (pcc_doorbell_irq[subspace_id] > 0) {
264 		int rc;
265 
266 		rc = devm_request_irq(dev, pcc_doorbell_irq[subspace_id],
267 				      pcc_mbox_irq, 0, MBOX_IRQ_NAME, chan);
268 		if (unlikely(rc)) {
269 			dev_err(dev, "failed to register PCC interrupt %d\n",
270 				pcc_doorbell_irq[subspace_id]);
271 			pcc_mbox_free_channel(chan);
272 			chan = ERR_PTR(rc);
273 		}
274 	}
275 
276 	return chan;
277 }
278 EXPORT_SYMBOL_GPL(pcc_mbox_request_channel);
279 
280 /**
281  * pcc_mbox_free_channel - Clients call this to free their Channel.
282  *
283  * @chan: Pointer to the mailbox channel as returned by
284  *		pcc_mbox_request_channel()
285  */
286 void pcc_mbox_free_channel(struct mbox_chan *chan)
287 {
288 	u32 id = chan - pcc_mbox_channels;
289 	unsigned long flags;
290 
291 	if (!chan || !chan->cl)
292 		return;
293 
294 	if (id >= pcc_mbox_ctrl.num_chans) {
295 		pr_debug("pcc_mbox_free_channel: Invalid mbox_chan passed\n");
296 		return;
297 	}
298 
299 	if (pcc_doorbell_irq[id] > 0)
300 		devm_free_irq(chan->mbox->dev, pcc_doorbell_irq[id], chan);
301 
302 	spin_lock_irqsave(&chan->lock, flags);
303 	chan->cl = NULL;
304 	chan->active_req = NULL;
305 	if (chan->txdone_method == TXDONE_BY_ACK)
306 		chan->txdone_method = TXDONE_BY_POLL;
307 
308 	spin_unlock_irqrestore(&chan->lock, flags);
309 }
310 EXPORT_SYMBOL_GPL(pcc_mbox_free_channel);
311 
312 /**
313  * pcc_send_data - Called from Mailbox Controller code. Used
314  *		here only to ring the channel doorbell. The PCC client
315  *		specific read/write is done in the client driver in
316  *		order to maintain atomicity over PCC channel once
317  *		OS has control over it. See above for flow of operations.
318  * @chan: Pointer to Mailbox channel over which to send data.
319  * @data: Client specific data written over channel. Used here
320  *		only for debug after PCC transaction completes.
321  *
322  * Return: Err if something failed else 0 for success.
323  */
324 static int pcc_send_data(struct mbox_chan *chan, void *data)
325 {
326 	struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv;
327 	struct acpi_generic_address *doorbell;
328 	u64 doorbell_preserve;
329 	u64 doorbell_val;
330 	u64 doorbell_write;
331 	u32 id = chan - pcc_mbox_channels;
332 	int ret = 0;
333 
334 	if (id >= pcc_mbox_ctrl.num_chans) {
335 		pr_debug("pcc_send_data: Invalid mbox_chan passed\n");
336 		return -ENOENT;
337 	}
338 
339 	doorbell = &pcct_ss->doorbell_register;
340 	doorbell_preserve = pcct_ss->preserve_mask;
341 	doorbell_write = pcct_ss->write_mask;
342 
343 	/* Sync notification from OS to Platform. */
344 	if (pcc_doorbell_vaddr[id]) {
345 		ret = read_register(pcc_doorbell_vaddr[id], &doorbell_val,
346 			doorbell->bit_width);
347 		if (ret)
348 			return ret;
349 		ret = write_register(pcc_doorbell_vaddr[id],
350 			(doorbell_val & doorbell_preserve) | doorbell_write,
351 			doorbell->bit_width);
352 	} else {
353 		ret = acpi_read(&doorbell_val, doorbell);
354 		if (ret)
355 			return ret;
356 		ret = acpi_write((doorbell_val & doorbell_preserve) | doorbell_write,
357 			doorbell);
358 	}
359 	return ret;
360 }
361 
362 static const struct mbox_chan_ops pcc_chan_ops = {
363 	.send_data = pcc_send_data,
364 };
365 
366 /**
367  * parse_pcc_subspaces -- Count PCC subspaces defined
368  * @header: Pointer to the ACPI subtable header under the PCCT.
369  * @end: End of subtable entry.
370  *
371  * Return: If we find a PCC subspace entry of a valid type, return 0.
372  *	Otherwise, return -EINVAL.
373  *
374  * This gets called for each entry in the PCC table.
375  */
376 static int parse_pcc_subspace(union acpi_subtable_headers *header,
377 		const unsigned long end)
378 {
379 	struct acpi_pcct_subspace *ss = (struct acpi_pcct_subspace *) header;
380 
381 	if (ss->header.type < ACPI_PCCT_TYPE_RESERVED)
382 		return 0;
383 
384 	return -EINVAL;
385 }
386 
387 /**
388  * pcc_parse_subspace_irq - Parse the PCC IRQ and PCC ACK register
389  *		There should be one entry per PCC client.
390  * @id: PCC subspace index.
391  * @pcct_ss: Pointer to the ACPI subtable header under the PCCT.
392  *
393  * Return: 0 for Success, else errno.
394  *
395  * This gets called for each entry in the PCC table.
396  */
397 static int pcc_parse_subspace_irq(int id,
398 				  struct acpi_pcct_hw_reduced *pcct_ss)
399 {
400 	pcc_doorbell_irq[id] = pcc_map_interrupt(pcct_ss->platform_interrupt,
401 						 (u32)pcct_ss->flags);
402 	if (pcc_doorbell_irq[id] <= 0) {
403 		pr_err("PCC GSI %d not registered\n",
404 		       pcct_ss->platform_interrupt);
405 		return -EINVAL;
406 	}
407 
408 	if (pcct_ss->header.type
409 		== ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
410 		struct acpi_pcct_hw_reduced_type2 *pcct2_ss = (void *)pcct_ss;
411 
412 		pcc_doorbell_ack_vaddr[id] = acpi_os_ioremap(
413 				pcct2_ss->platform_ack_register.address,
414 				pcct2_ss->platform_ack_register.bit_width / 8);
415 		if (!pcc_doorbell_ack_vaddr[id]) {
416 			pr_err("Failed to ioremap PCC ACK register\n");
417 			return -ENOMEM;
418 		}
419 	}
420 
421 	return 0;
422 }
423 
424 /**
425  * acpi_pcc_probe - Parse the ACPI tree for the PCCT.
426  *
427  * Return: 0 for Success, else errno.
428  */
429 static int __init acpi_pcc_probe(void)
430 {
431 	struct acpi_table_header *pcct_tbl;
432 	struct acpi_subtable_header *pcct_entry;
433 	struct acpi_table_pcct *acpi_pcct_tbl;
434 	struct acpi_subtable_proc proc[ACPI_PCCT_TYPE_RESERVED];
435 	int count, i, rc;
436 	acpi_status status = AE_OK;
437 
438 	/* Search for PCCT */
439 	status = acpi_get_table(ACPI_SIG_PCCT, 0, &pcct_tbl);
440 
441 	if (ACPI_FAILURE(status) || !pcct_tbl)
442 		return -ENODEV;
443 
444 	/* Set up the subtable handlers */
445 	for (i = ACPI_PCCT_TYPE_GENERIC_SUBSPACE;
446 	     i < ACPI_PCCT_TYPE_RESERVED; i++) {
447 		proc[i].id = i;
448 		proc[i].count = 0;
449 		proc[i].handler = parse_pcc_subspace;
450 	}
451 
452 	count = acpi_table_parse_entries_array(ACPI_SIG_PCCT,
453 			sizeof(struct acpi_table_pcct), proc,
454 			ACPI_PCCT_TYPE_RESERVED, MAX_PCC_SUBSPACES);
455 	if (count <= 0 || count > MAX_PCC_SUBSPACES) {
456 		if (count < 0)
457 			pr_warn("Error parsing PCC subspaces from PCCT\n");
458 		else
459 			pr_warn("Invalid PCCT: %d PCC subspaces\n", count);
460 
461 		rc = -EINVAL;
462 		goto err_put_pcct;
463 	}
464 
465 	pcc_mbox_channels = kcalloc(count, sizeof(struct mbox_chan),
466 				    GFP_KERNEL);
467 	if (!pcc_mbox_channels) {
468 		pr_err("Could not allocate space for PCC mbox channels\n");
469 		rc = -ENOMEM;
470 		goto err_put_pcct;
471 	}
472 
473 	pcc_doorbell_vaddr = kcalloc(count, sizeof(void *), GFP_KERNEL);
474 	if (!pcc_doorbell_vaddr) {
475 		rc = -ENOMEM;
476 		goto err_free_mbox;
477 	}
478 
479 	pcc_doorbell_ack_vaddr = kcalloc(count, sizeof(void *), GFP_KERNEL);
480 	if (!pcc_doorbell_ack_vaddr) {
481 		rc = -ENOMEM;
482 		goto err_free_db_vaddr;
483 	}
484 
485 	pcc_doorbell_irq = kcalloc(count, sizeof(int), GFP_KERNEL);
486 	if (!pcc_doorbell_irq) {
487 		rc = -ENOMEM;
488 		goto err_free_db_ack_vaddr;
489 	}
490 
491 	/* Point to the first PCC subspace entry */
492 	pcct_entry = (struct acpi_subtable_header *) (
493 		(unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct));
494 
495 	acpi_pcct_tbl = (struct acpi_table_pcct *) pcct_tbl;
496 	if (acpi_pcct_tbl->flags & ACPI_PCCT_DOORBELL)
497 		pcc_mbox_ctrl.txdone_irq = true;
498 
499 	for (i = 0; i < count; i++) {
500 		struct acpi_generic_address *db_reg;
501 		struct acpi_pcct_subspace *pcct_ss;
502 		pcc_mbox_channels[i].con_priv = pcct_entry;
503 
504 		if (pcct_entry->type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE ||
505 		    pcct_entry->type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
506 			struct acpi_pcct_hw_reduced *pcct_hrss;
507 
508 			pcct_hrss = (struct acpi_pcct_hw_reduced *) pcct_entry;
509 
510 			if (pcc_mbox_ctrl.txdone_irq) {
511 				rc = pcc_parse_subspace_irq(i, pcct_hrss);
512 				if (rc < 0)
513 					goto err;
514 			}
515 		}
516 		pcct_ss = (struct acpi_pcct_subspace *) pcct_entry;
517 
518 		/* If doorbell is in system memory cache the virt address */
519 		db_reg = &pcct_ss->doorbell_register;
520 		if (db_reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
521 			pcc_doorbell_vaddr[i] = acpi_os_ioremap(db_reg->address,
522 							db_reg->bit_width/8);
523 		pcct_entry = (struct acpi_subtable_header *)
524 			((unsigned long) pcct_entry + pcct_entry->length);
525 	}
526 
527 	pcc_mbox_ctrl.num_chans = count;
528 
529 	pr_info("Detected %d PCC Subspaces\n", pcc_mbox_ctrl.num_chans);
530 
531 	return 0;
532 
533 err:
534 	kfree(pcc_doorbell_irq);
535 err_free_db_ack_vaddr:
536 	kfree(pcc_doorbell_ack_vaddr);
537 err_free_db_vaddr:
538 	kfree(pcc_doorbell_vaddr);
539 err_free_mbox:
540 	kfree(pcc_mbox_channels);
541 err_put_pcct:
542 	acpi_put_table(pcct_tbl);
543 	return rc;
544 }
545 
546 /**
547  * pcc_mbox_probe - Called when we find a match for the
548  *	PCCT platform device. This is purely used to represent
549  *	the PCCT as a virtual device for registering with the
550  *	generic Mailbox framework.
551  *
552  * @pdev: Pointer to platform device returned when a match
553  *	is found.
554  *
555  *	Return: 0 for Success, else errno.
556  */
557 static int pcc_mbox_probe(struct platform_device *pdev)
558 {
559 	int ret = 0;
560 
561 	pcc_mbox_ctrl.chans = pcc_mbox_channels;
562 	pcc_mbox_ctrl.ops = &pcc_chan_ops;
563 	pcc_mbox_ctrl.dev = &pdev->dev;
564 
565 	pr_info("Registering PCC driver as Mailbox controller\n");
566 	ret = mbox_controller_register(&pcc_mbox_ctrl);
567 
568 	if (ret) {
569 		pr_err("Err registering PCC as Mailbox controller: %d\n", ret);
570 		ret = -ENODEV;
571 	}
572 
573 	return ret;
574 }
575 
576 static struct platform_driver pcc_mbox_driver = {
577 	.probe = pcc_mbox_probe,
578 	.driver = {
579 		.name = "PCCT",
580 		.owner = THIS_MODULE,
581 	},
582 };
583 
584 static int __init pcc_init(void)
585 {
586 	int ret;
587 	struct platform_device *pcc_pdev;
588 
589 	if (acpi_disabled)
590 		return -ENODEV;
591 
592 	/* Check if PCC support is available. */
593 	ret = acpi_pcc_probe();
594 
595 	if (ret) {
596 		pr_debug("ACPI PCC probe failed.\n");
597 		return -ENODEV;
598 	}
599 
600 	pcc_pdev = platform_create_bundle(&pcc_mbox_driver,
601 			pcc_mbox_probe, NULL, 0, NULL, 0);
602 
603 	if (IS_ERR(pcc_pdev)) {
604 		pr_debug("Err creating PCC platform bundle\n");
605 		return PTR_ERR(pcc_pdev);
606 	}
607 
608 	return 0;
609 }
610 
611 /*
612  * Make PCC init postcore so that users of this mailbox
613  * such as the ACPI Processor driver have it available
614  * at their init.
615  */
616 postcore_initcall(pcc_init);
617