xref: /openbmc/linux/drivers/mailbox/pcc.c (revision 6d99a79c)
1 /*
2  *	Copyright (C) 2014 Linaro Ltd.
3  *	Author:	Ashwin Chaugule <ashwin.chaugule@linaro.org>
4  *
5  *  This program is free software; you can redistribute it and/or modify
6  *  it under the terms of the GNU General Public License as published by
7  *  the Free Software Foundation; either version 2 of the License, or
8  *  (at your option) any later version.
9  *
10  *  This program is distributed in the hope that it will be useful,
11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  *  GNU General Public License for more details.
14  *
15  *  PCC (Platform Communication Channel) is defined in the ACPI 5.0+
16  *  specification. It is a mailbox like mechanism to allow clients
17  *  such as CPPC (Collaborative Processor Performance Control), RAS
18  *  (Reliability, Availability and Serviceability) and MPST (Memory
19  *  Node Power State Table) to talk to the platform (e.g. BMC) through
20  *  shared memory regions as defined in the PCC table entries. The PCC
21  *  specification supports a Doorbell mechanism for the PCC clients
22  *  to notify the platform about new data. This Doorbell information
23  *  is also specified in each PCC table entry.
24  *
25  *  Typical high level flow of operation is:
26  *
27  *  PCC Reads:
28  *  * Client tries to acquire a channel lock.
29  *  * After it is acquired it writes READ cmd in communication region cmd
30  *		address.
31  *  * Client issues mbox_send_message() which rings the PCC doorbell
32  *		for its PCC channel.
33  *  * If command completes, then client has control over channel and
34  *		it can proceed with its reads.
35  *  * Client releases lock.
36  *
37  *  PCC Writes:
38  *  * Client tries to acquire channel lock.
39  *  * Client writes to its communication region after it acquires a
40  *		channel lock.
41  *  * Client writes WRITE cmd in communication region cmd address.
42  *  * Client issues mbox_send_message() which rings the PCC doorbell
43  *		for its PCC channel.
44  *  * If command completes, then writes have succeded and it can release
45  *		the channel lock.
46  *
47  *  There is a Nominal latency defined for each channel which indicates
48  *  how long to wait until a command completes. If command is not complete
49  *  the client needs to retry or assume failure.
50  *
51  *	For more details about PCC, please see the ACPI specification from
52  *  http://www.uefi.org/ACPIv5.1 Section 14.
53  *
54  *  This file implements PCC as a Mailbox controller and allows for PCC
55  *  clients to be implemented as its Mailbox Client Channels.
56  */
57 
58 #include <linux/acpi.h>
59 #include <linux/delay.h>
60 #include <linux/io.h>
61 #include <linux/init.h>
62 #include <linux/interrupt.h>
63 #include <linux/list.h>
64 #include <linux/platform_device.h>
65 #include <linux/mailbox_controller.h>
66 #include <linux/mailbox_client.h>
67 #include <linux/io-64-nonatomic-lo-hi.h>
68 #include <acpi/pcc.h>
69 
70 #include "mailbox.h"
71 
72 #define MBOX_IRQ_NAME		"pcc-mbox"
73 
74 static struct mbox_chan *pcc_mbox_channels;
75 
76 /* Array of cached virtual address for doorbell registers */
77 static void __iomem **pcc_doorbell_vaddr;
78 /* Array of cached virtual address for doorbell ack registers */
79 static void __iomem **pcc_doorbell_ack_vaddr;
80 /* Array of doorbell interrupts */
81 static int *pcc_doorbell_irq;
82 
83 static struct mbox_controller pcc_mbox_ctrl = {};
84 /**
85  * get_pcc_channel - Given a PCC subspace idx, get
86  *	the respective mbox_channel.
87  * @id: PCC subspace index.
88  *
89  * Return: ERR_PTR(errno) if error, else pointer
90  *	to mbox channel.
91  */
92 static struct mbox_chan *get_pcc_channel(int id)
93 {
94 	if (id < 0 || id >= pcc_mbox_ctrl.num_chans)
95 		return ERR_PTR(-ENOENT);
96 
97 	return &pcc_mbox_channels[id];
98 }
99 
100 /*
101  * PCC can be used with perf critical drivers such as CPPC
102  * So it makes sense to locally cache the virtual address and
103  * use it to read/write to PCC registers such as doorbell register
104  *
105  * The below read_register and write_registers are used to read and
106  * write from perf critical registers such as PCC doorbell register
107  */
108 static int read_register(void __iomem *vaddr, u64 *val, unsigned int bit_width)
109 {
110 	int ret_val = 0;
111 
112 	switch (bit_width) {
113 	case 8:
114 		*val = readb(vaddr);
115 		break;
116 	case 16:
117 		*val = readw(vaddr);
118 		break;
119 	case 32:
120 		*val = readl(vaddr);
121 		break;
122 	case 64:
123 		*val = readq(vaddr);
124 		break;
125 	default:
126 		pr_debug("Error: Cannot read register of %u bit width",
127 			bit_width);
128 		ret_val = -EFAULT;
129 		break;
130 	}
131 	return ret_val;
132 }
133 
134 static int write_register(void __iomem *vaddr, u64 val, unsigned int bit_width)
135 {
136 	int ret_val = 0;
137 
138 	switch (bit_width) {
139 	case 8:
140 		writeb(val, vaddr);
141 		break;
142 	case 16:
143 		writew(val, vaddr);
144 		break;
145 	case 32:
146 		writel(val, vaddr);
147 		break;
148 	case 64:
149 		writeq(val, vaddr);
150 		break;
151 	default:
152 		pr_debug("Error: Cannot write register of %u bit width",
153 			bit_width);
154 		ret_val = -EFAULT;
155 		break;
156 	}
157 	return ret_val;
158 }
159 
160 /**
161  * pcc_map_interrupt - Map a PCC subspace GSI to a linux IRQ number
162  * @interrupt: GSI number.
163  * @flags: interrupt flags
164  *
165  * Returns: a valid linux IRQ number on success
166  *		0 or -EINVAL on failure
167  */
168 static int pcc_map_interrupt(u32 interrupt, u32 flags)
169 {
170 	int trigger, polarity;
171 
172 	if (!interrupt)
173 		return 0;
174 
175 	trigger = (flags & ACPI_PCCT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
176 			: ACPI_LEVEL_SENSITIVE;
177 
178 	polarity = (flags & ACPI_PCCT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
179 			: ACPI_ACTIVE_HIGH;
180 
181 	return acpi_register_gsi(NULL, interrupt, trigger, polarity);
182 }
183 
184 /**
185  * pcc_mbox_irq - PCC mailbox interrupt handler
186  */
187 static irqreturn_t pcc_mbox_irq(int irq, void *p)
188 {
189 	struct acpi_generic_address *doorbell_ack;
190 	struct acpi_pcct_hw_reduced *pcct_ss;
191 	struct mbox_chan *chan = p;
192 	u64 doorbell_ack_preserve;
193 	u64 doorbell_ack_write;
194 	u64 doorbell_ack_val;
195 	int ret;
196 
197 	pcct_ss = chan->con_priv;
198 
199 	mbox_chan_received_data(chan, NULL);
200 
201 	if (pcct_ss->header.type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
202 		struct acpi_pcct_hw_reduced_type2 *pcct2_ss = chan->con_priv;
203 		u32 id = chan - pcc_mbox_channels;
204 
205 		doorbell_ack = &pcct2_ss->platform_ack_register;
206 		doorbell_ack_preserve = pcct2_ss->ack_preserve_mask;
207 		doorbell_ack_write = pcct2_ss->ack_write_mask;
208 
209 		ret = read_register(pcc_doorbell_ack_vaddr[id],
210 				    &doorbell_ack_val,
211 				    doorbell_ack->bit_width);
212 		if (ret)
213 			return IRQ_NONE;
214 
215 		ret = write_register(pcc_doorbell_ack_vaddr[id],
216 				     (doorbell_ack_val & doorbell_ack_preserve)
217 					| doorbell_ack_write,
218 				     doorbell_ack->bit_width);
219 		if (ret)
220 			return IRQ_NONE;
221 	}
222 
223 	return IRQ_HANDLED;
224 }
225 
226 /**
227  * pcc_mbox_request_channel - PCC clients call this function to
228  *		request a pointer to their PCC subspace, from which they
229  *		can get the details of communicating with the remote.
230  * @cl: Pointer to Mailbox client, so we know where to bind the
231  *		Channel.
232  * @subspace_id: The PCC Subspace index as parsed in the PCC client
233  *		ACPI package. This is used to lookup the array of PCC
234  *		subspaces as parsed by the PCC Mailbox controller.
235  *
236  * Return: Pointer to the Mailbox Channel if successful or
237  *		ERR_PTR.
238  */
239 struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl,
240 		int subspace_id)
241 {
242 	struct device *dev = pcc_mbox_ctrl.dev;
243 	struct mbox_chan *chan;
244 	unsigned long flags;
245 
246 	/*
247 	 * Each PCC Subspace is a Mailbox Channel.
248 	 * The PCC Clients get their PCC Subspace ID
249 	 * from their own tables and pass it here.
250 	 * This returns a pointer to the PCC subspace
251 	 * for the Client to operate on.
252 	 */
253 	chan = get_pcc_channel(subspace_id);
254 
255 	if (IS_ERR(chan) || chan->cl) {
256 		dev_err(dev, "Channel not found for idx: %d\n", subspace_id);
257 		return ERR_PTR(-EBUSY);
258 	}
259 
260 	spin_lock_irqsave(&chan->lock, flags);
261 	chan->msg_free = 0;
262 	chan->msg_count = 0;
263 	chan->active_req = NULL;
264 	chan->cl = cl;
265 	init_completion(&chan->tx_complete);
266 
267 	if (chan->txdone_method == TXDONE_BY_POLL && cl->knows_txdone)
268 		chan->txdone_method = TXDONE_BY_ACK;
269 
270 	spin_unlock_irqrestore(&chan->lock, flags);
271 
272 	if (pcc_doorbell_irq[subspace_id] > 0) {
273 		int rc;
274 
275 		rc = devm_request_irq(dev, pcc_doorbell_irq[subspace_id],
276 				      pcc_mbox_irq, 0, MBOX_IRQ_NAME, chan);
277 		if (unlikely(rc)) {
278 			dev_err(dev, "failed to register PCC interrupt %d\n",
279 				pcc_doorbell_irq[subspace_id]);
280 			pcc_mbox_free_channel(chan);
281 			chan = ERR_PTR(rc);
282 		}
283 	}
284 
285 	return chan;
286 }
287 EXPORT_SYMBOL_GPL(pcc_mbox_request_channel);
288 
289 /**
290  * pcc_mbox_free_channel - Clients call this to free their Channel.
291  *
292  * @chan: Pointer to the mailbox channel as returned by
293  *		pcc_mbox_request_channel()
294  */
295 void pcc_mbox_free_channel(struct mbox_chan *chan)
296 {
297 	u32 id = chan - pcc_mbox_channels;
298 	unsigned long flags;
299 
300 	if (!chan || !chan->cl)
301 		return;
302 
303 	if (id >= pcc_mbox_ctrl.num_chans) {
304 		pr_debug("pcc_mbox_free_channel: Invalid mbox_chan passed\n");
305 		return;
306 	}
307 
308 	if (pcc_doorbell_irq[id] > 0)
309 		devm_free_irq(chan->mbox->dev, pcc_doorbell_irq[id], chan);
310 
311 	spin_lock_irqsave(&chan->lock, flags);
312 	chan->cl = NULL;
313 	chan->active_req = NULL;
314 	if (chan->txdone_method == TXDONE_BY_ACK)
315 		chan->txdone_method = TXDONE_BY_POLL;
316 
317 	spin_unlock_irqrestore(&chan->lock, flags);
318 }
319 EXPORT_SYMBOL_GPL(pcc_mbox_free_channel);
320 
321 /**
322  * pcc_send_data - Called from Mailbox Controller code. Used
323  *		here only to ring the channel doorbell. The PCC client
324  *		specific read/write is done in the client driver in
325  *		order to maintain atomicity over PCC channel once
326  *		OS has control over it. See above for flow of operations.
327  * @chan: Pointer to Mailbox channel over which to send data.
328  * @data: Client specific data written over channel. Used here
329  *		only for debug after PCC transaction completes.
330  *
331  * Return: Err if something failed else 0 for success.
332  */
333 static int pcc_send_data(struct mbox_chan *chan, void *data)
334 {
335 	struct acpi_pcct_hw_reduced *pcct_ss = chan->con_priv;
336 	struct acpi_generic_address *doorbell;
337 	u64 doorbell_preserve;
338 	u64 doorbell_val;
339 	u64 doorbell_write;
340 	u32 id = chan - pcc_mbox_channels;
341 	int ret = 0;
342 
343 	if (id >= pcc_mbox_ctrl.num_chans) {
344 		pr_debug("pcc_send_data: Invalid mbox_chan passed\n");
345 		return -ENOENT;
346 	}
347 
348 	doorbell = &pcct_ss->doorbell_register;
349 	doorbell_preserve = pcct_ss->preserve_mask;
350 	doorbell_write = pcct_ss->write_mask;
351 
352 	/* Sync notification from OS to Platform. */
353 	if (pcc_doorbell_vaddr[id]) {
354 		ret = read_register(pcc_doorbell_vaddr[id], &doorbell_val,
355 			doorbell->bit_width);
356 		if (ret)
357 			return ret;
358 		ret = write_register(pcc_doorbell_vaddr[id],
359 			(doorbell_val & doorbell_preserve) | doorbell_write,
360 			doorbell->bit_width);
361 	} else {
362 		ret = acpi_read(&doorbell_val, doorbell);
363 		if (ret)
364 			return ret;
365 		ret = acpi_write((doorbell_val & doorbell_preserve) | doorbell_write,
366 			doorbell);
367 	}
368 	return ret;
369 }
370 
371 static const struct mbox_chan_ops pcc_chan_ops = {
372 	.send_data = pcc_send_data,
373 };
374 
375 /**
376  * parse_pcc_subspaces -- Count PCC subspaces defined
377  * @header: Pointer to the ACPI subtable header under the PCCT.
378  * @end: End of subtable entry.
379  *
380  * Return: If we find a PCC subspace entry of a valid type, return 0.
381  *	Otherwise, return -EINVAL.
382  *
383  * This gets called for each entry in the PCC table.
384  */
385 static int parse_pcc_subspace(struct acpi_subtable_header *header,
386 		const unsigned long end)
387 {
388 	struct acpi_pcct_subspace *ss = (struct acpi_pcct_subspace *) header;
389 
390 	if (ss->header.type < ACPI_PCCT_TYPE_RESERVED)
391 		return 0;
392 
393 	return -EINVAL;
394 }
395 
396 /**
397  * pcc_parse_subspace_irq - Parse the PCC IRQ and PCC ACK register
398  *		There should be one entry per PCC client.
399  * @id: PCC subspace index.
400  * @pcct_ss: Pointer to the ACPI subtable header under the PCCT.
401  *
402  * Return: 0 for Success, else errno.
403  *
404  * This gets called for each entry in the PCC table.
405  */
406 static int pcc_parse_subspace_irq(int id,
407 				  struct acpi_pcct_hw_reduced *pcct_ss)
408 {
409 	pcc_doorbell_irq[id] = pcc_map_interrupt(pcct_ss->platform_interrupt,
410 						 (u32)pcct_ss->flags);
411 	if (pcc_doorbell_irq[id] <= 0) {
412 		pr_err("PCC GSI %d not registered\n",
413 		       pcct_ss->platform_interrupt);
414 		return -EINVAL;
415 	}
416 
417 	if (pcct_ss->header.type
418 		== ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
419 		struct acpi_pcct_hw_reduced_type2 *pcct2_ss = (void *)pcct_ss;
420 
421 		pcc_doorbell_ack_vaddr[id] = acpi_os_ioremap(
422 				pcct2_ss->platform_ack_register.address,
423 				pcct2_ss->platform_ack_register.bit_width / 8);
424 		if (!pcc_doorbell_ack_vaddr[id]) {
425 			pr_err("Failed to ioremap PCC ACK register\n");
426 			return -ENOMEM;
427 		}
428 	}
429 
430 	return 0;
431 }
432 
433 /**
434  * acpi_pcc_probe - Parse the ACPI tree for the PCCT.
435  *
436  * Return: 0 for Success, else errno.
437  */
438 static int __init acpi_pcc_probe(void)
439 {
440 	struct acpi_table_header *pcct_tbl;
441 	struct acpi_subtable_header *pcct_entry;
442 	struct acpi_table_pcct *acpi_pcct_tbl;
443 	struct acpi_subtable_proc proc[ACPI_PCCT_TYPE_RESERVED];
444 	int count, i, rc;
445 	acpi_status status = AE_OK;
446 
447 	/* Search for PCCT */
448 	status = acpi_get_table(ACPI_SIG_PCCT, 0, &pcct_tbl);
449 
450 	if (ACPI_FAILURE(status) || !pcct_tbl)
451 		return -ENODEV;
452 
453 	/* Set up the subtable handlers */
454 	for (i = ACPI_PCCT_TYPE_GENERIC_SUBSPACE;
455 	     i < ACPI_PCCT_TYPE_RESERVED; i++) {
456 		proc[i].id = i;
457 		proc[i].count = 0;
458 		proc[i].handler = parse_pcc_subspace;
459 	}
460 
461 	count = acpi_table_parse_entries_array(ACPI_SIG_PCCT,
462 			sizeof(struct acpi_table_pcct), proc,
463 			ACPI_PCCT_TYPE_RESERVED, MAX_PCC_SUBSPACES);
464 	if (count <= 0 || count > MAX_PCC_SUBSPACES) {
465 		if (count < 0)
466 			pr_warn("Error parsing PCC subspaces from PCCT\n");
467 		else
468 			pr_warn("Invalid PCCT: %d PCC subspaces\n", count);
469 		return -EINVAL;
470 	}
471 
472 	pcc_mbox_channels = kcalloc(count, sizeof(struct mbox_chan),
473 				    GFP_KERNEL);
474 	if (!pcc_mbox_channels) {
475 		pr_err("Could not allocate space for PCC mbox channels\n");
476 		return -ENOMEM;
477 	}
478 
479 	pcc_doorbell_vaddr = kcalloc(count, sizeof(void *), GFP_KERNEL);
480 	if (!pcc_doorbell_vaddr) {
481 		rc = -ENOMEM;
482 		goto err_free_mbox;
483 	}
484 
485 	pcc_doorbell_ack_vaddr = kcalloc(count, sizeof(void *), GFP_KERNEL);
486 	if (!pcc_doorbell_ack_vaddr) {
487 		rc = -ENOMEM;
488 		goto err_free_db_vaddr;
489 	}
490 
491 	pcc_doorbell_irq = kcalloc(count, sizeof(int), GFP_KERNEL);
492 	if (!pcc_doorbell_irq) {
493 		rc = -ENOMEM;
494 		goto err_free_db_ack_vaddr;
495 	}
496 
497 	/* Point to the first PCC subspace entry */
498 	pcct_entry = (struct acpi_subtable_header *) (
499 		(unsigned long) pcct_tbl + sizeof(struct acpi_table_pcct));
500 
501 	acpi_pcct_tbl = (struct acpi_table_pcct *) pcct_tbl;
502 	if (acpi_pcct_tbl->flags & ACPI_PCCT_DOORBELL)
503 		pcc_mbox_ctrl.txdone_irq = true;
504 
505 	for (i = 0; i < count; i++) {
506 		struct acpi_generic_address *db_reg;
507 		struct acpi_pcct_subspace *pcct_ss;
508 		pcc_mbox_channels[i].con_priv = pcct_entry;
509 
510 		if (pcct_entry->type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE ||
511 		    pcct_entry->type == ACPI_PCCT_TYPE_HW_REDUCED_SUBSPACE_TYPE2) {
512 			struct acpi_pcct_hw_reduced *pcct_hrss;
513 
514 			pcct_hrss = (struct acpi_pcct_hw_reduced *) pcct_entry;
515 
516 			if (pcc_mbox_ctrl.txdone_irq) {
517 				rc = pcc_parse_subspace_irq(i, pcct_hrss);
518 				if (rc < 0)
519 					goto err;
520 			}
521 		}
522 		pcct_ss = (struct acpi_pcct_subspace *) pcct_entry;
523 
524 		/* If doorbell is in system memory cache the virt address */
525 		db_reg = &pcct_ss->doorbell_register;
526 		if (db_reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
527 			pcc_doorbell_vaddr[i] = acpi_os_ioremap(db_reg->address,
528 							db_reg->bit_width/8);
529 		pcct_entry = (struct acpi_subtable_header *)
530 			((unsigned long) pcct_entry + pcct_entry->length);
531 	}
532 
533 	pcc_mbox_ctrl.num_chans = count;
534 
535 	pr_info("Detected %d PCC Subspaces\n", pcc_mbox_ctrl.num_chans);
536 
537 	return 0;
538 
539 err:
540 	kfree(pcc_doorbell_irq);
541 err_free_db_ack_vaddr:
542 	kfree(pcc_doorbell_ack_vaddr);
543 err_free_db_vaddr:
544 	kfree(pcc_doorbell_vaddr);
545 err_free_mbox:
546 	kfree(pcc_mbox_channels);
547 	return rc;
548 }
549 
550 /**
551  * pcc_mbox_probe - Called when we find a match for the
552  *	PCCT platform device. This is purely used to represent
553  *	the PCCT as a virtual device for registering with the
554  *	generic Mailbox framework.
555  *
556  * @pdev: Pointer to platform device returned when a match
557  *	is found.
558  *
559  *	Return: 0 for Success, else errno.
560  */
561 static int pcc_mbox_probe(struct platform_device *pdev)
562 {
563 	int ret = 0;
564 
565 	pcc_mbox_ctrl.chans = pcc_mbox_channels;
566 	pcc_mbox_ctrl.ops = &pcc_chan_ops;
567 	pcc_mbox_ctrl.dev = &pdev->dev;
568 
569 	pr_info("Registering PCC driver as Mailbox controller\n");
570 	ret = mbox_controller_register(&pcc_mbox_ctrl);
571 
572 	if (ret) {
573 		pr_err("Err registering PCC as Mailbox controller: %d\n", ret);
574 		ret = -ENODEV;
575 	}
576 
577 	return ret;
578 }
579 
580 struct platform_driver pcc_mbox_driver = {
581 	.probe = pcc_mbox_probe,
582 	.driver = {
583 		.name = "PCCT",
584 		.owner = THIS_MODULE,
585 	},
586 };
587 
588 static int __init pcc_init(void)
589 {
590 	int ret;
591 	struct platform_device *pcc_pdev;
592 
593 	if (acpi_disabled)
594 		return -ENODEV;
595 
596 	/* Check if PCC support is available. */
597 	ret = acpi_pcc_probe();
598 
599 	if (ret) {
600 		pr_debug("ACPI PCC probe failed.\n");
601 		return -ENODEV;
602 	}
603 
604 	pcc_pdev = platform_create_bundle(&pcc_mbox_driver,
605 			pcc_mbox_probe, NULL, 0, NULL, 0);
606 
607 	if (IS_ERR(pcc_pdev)) {
608 		pr_debug("Err creating PCC platform bundle\n");
609 		return PTR_ERR(pcc_pdev);
610 	}
611 
612 	return 0;
613 }
614 
615 /*
616  * Make PCC init postcore so that users of this mailbox
617  * such as the ACPI Processor driver have it available
618  * at their init.
619  */
620 postcore_initcall(pcc_init);
621