1 // SPDX-License-Identifier: GPL-2.0-only OR MIT 2 /* 3 * Apple mailbox driver 4 * 5 * Copyright (C) 2021 The Asahi Linux Contributors 6 * 7 * This driver adds support for two mailbox variants (called ASC and M3 by 8 * Apple) found in Apple SoCs such as the M1. It consists of two FIFOs used to 9 * exchange 64+32 bit messages between the main CPU and a co-processor. 10 * Various coprocessors implement different IPC protocols based on these simple 11 * messages and shared memory buffers. 12 * 13 * Both the main CPU and the co-processor see the same set of registers but 14 * the first FIFO (A2I) is always used to transfer messages from the application 15 * processor (us) to the I/O processor and the second one (I2A) for the 16 * other direction. 17 */ 18 19 #include <linux/apple-mailbox.h> 20 #include <linux/device.h> 21 #include <linux/gfp.h> 22 #include <linux/interrupt.h> 23 #include <linux/io.h> 24 #include <linux/mailbox_controller.h> 25 #include <linux/module.h> 26 #include <linux/of.h> 27 #include <linux/platform_device.h> 28 #include <linux/types.h> 29 30 #define APPLE_ASC_MBOX_CONTROL_FULL BIT(16) 31 #define APPLE_ASC_MBOX_CONTROL_EMPTY BIT(17) 32 33 #define APPLE_ASC_MBOX_A2I_CONTROL 0x110 34 #define APPLE_ASC_MBOX_A2I_SEND0 0x800 35 #define APPLE_ASC_MBOX_A2I_SEND1 0x808 36 #define APPLE_ASC_MBOX_A2I_RECV0 0x810 37 #define APPLE_ASC_MBOX_A2I_RECV1 0x818 38 39 #define APPLE_ASC_MBOX_I2A_CONTROL 0x114 40 #define APPLE_ASC_MBOX_I2A_SEND0 0x820 41 #define APPLE_ASC_MBOX_I2A_SEND1 0x828 42 #define APPLE_ASC_MBOX_I2A_RECV0 0x830 43 #define APPLE_ASC_MBOX_I2A_RECV1 0x838 44 45 #define APPLE_M3_MBOX_CONTROL_FULL BIT(16) 46 #define APPLE_M3_MBOX_CONTROL_EMPTY BIT(17) 47 48 #define APPLE_M3_MBOX_A2I_CONTROL 0x50 49 #define APPLE_M3_MBOX_A2I_SEND0 0x60 50 #define APPLE_M3_MBOX_A2I_SEND1 0x68 51 #define APPLE_M3_MBOX_A2I_RECV0 0x70 52 #define APPLE_M3_MBOX_A2I_RECV1 0x78 53 54 #define APPLE_M3_MBOX_I2A_CONTROL 0x80 55 #define APPLE_M3_MBOX_I2A_SEND0 0x90 56 #define APPLE_M3_MBOX_I2A_SEND1 0x98 57 #define APPLE_M3_MBOX_I2A_RECV0 0xa0 58 #define APPLE_M3_MBOX_I2A_RECV1 0xa8 59 60 #define APPLE_M3_MBOX_IRQ_ENABLE 0x48 61 #define APPLE_M3_MBOX_IRQ_ACK 0x4c 62 #define APPLE_M3_MBOX_IRQ_A2I_EMPTY BIT(0) 63 #define APPLE_M3_MBOX_IRQ_A2I_NOT_EMPTY BIT(1) 64 #define APPLE_M3_MBOX_IRQ_I2A_EMPTY BIT(2) 65 #define APPLE_M3_MBOX_IRQ_I2A_NOT_EMPTY BIT(3) 66 67 #define APPLE_MBOX_MSG1_OUTCNT GENMASK(56, 52) 68 #define APPLE_MBOX_MSG1_INCNT GENMASK(51, 48) 69 #define APPLE_MBOX_MSG1_OUTPTR GENMASK(47, 44) 70 #define APPLE_MBOX_MSG1_INPTR GENMASK(43, 40) 71 #define APPLE_MBOX_MSG1_MSG GENMASK(31, 0) 72 73 struct apple_mbox_hw { 74 unsigned int control_full; 75 unsigned int control_empty; 76 77 unsigned int a2i_control; 78 unsigned int a2i_send0; 79 unsigned int a2i_send1; 80 81 unsigned int i2a_control; 82 unsigned int i2a_recv0; 83 unsigned int i2a_recv1; 84 85 bool has_irq_controls; 86 unsigned int irq_enable; 87 unsigned int irq_ack; 88 unsigned int irq_bit_recv_not_empty; 89 unsigned int irq_bit_send_empty; 90 }; 91 92 struct apple_mbox { 93 void __iomem *regs; 94 const struct apple_mbox_hw *hw; 95 96 int irq_recv_not_empty; 97 int irq_send_empty; 98 99 struct mbox_chan chan; 100 101 struct device *dev; 102 struct mbox_controller controller; 103 }; 104 105 static const struct of_device_id apple_mbox_of_match[]; 106 107 static bool apple_mbox_hw_can_send(struct apple_mbox *apple_mbox) 108 { 109 u32 mbox_ctrl = 110 readl_relaxed(apple_mbox->regs + apple_mbox->hw->a2i_control); 111 112 return !(mbox_ctrl & apple_mbox->hw->control_full); 113 } 114 115 static int apple_mbox_hw_send(struct apple_mbox *apple_mbox, 116 struct apple_mbox_msg *msg) 117 { 118 if (!apple_mbox_hw_can_send(apple_mbox)) 119 return -EBUSY; 120 121 dev_dbg(apple_mbox->dev, "> TX %016llx %08x\n", msg->msg0, msg->msg1); 122 123 writeq_relaxed(msg->msg0, apple_mbox->regs + apple_mbox->hw->a2i_send0); 124 writeq_relaxed(FIELD_PREP(APPLE_MBOX_MSG1_MSG, msg->msg1), 125 apple_mbox->regs + apple_mbox->hw->a2i_send1); 126 127 return 0; 128 } 129 130 static bool apple_mbox_hw_can_recv(struct apple_mbox *apple_mbox) 131 { 132 u32 mbox_ctrl = 133 readl_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_control); 134 135 return !(mbox_ctrl & apple_mbox->hw->control_empty); 136 } 137 138 static int apple_mbox_hw_recv(struct apple_mbox *apple_mbox, 139 struct apple_mbox_msg *msg) 140 { 141 if (!apple_mbox_hw_can_recv(apple_mbox)) 142 return -ENOMSG; 143 144 msg->msg0 = readq_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_recv0); 145 msg->msg1 = FIELD_GET( 146 APPLE_MBOX_MSG1_MSG, 147 readq_relaxed(apple_mbox->regs + apple_mbox->hw->i2a_recv1)); 148 149 dev_dbg(apple_mbox->dev, "< RX %016llx %08x\n", msg->msg0, msg->msg1); 150 151 return 0; 152 } 153 154 static int apple_mbox_chan_send_data(struct mbox_chan *chan, void *data) 155 { 156 struct apple_mbox *apple_mbox = chan->con_priv; 157 struct apple_mbox_msg *msg = data; 158 int ret; 159 160 ret = apple_mbox_hw_send(apple_mbox, msg); 161 if (ret) 162 return ret; 163 164 /* 165 * The interrupt is level triggered and will keep firing as long as the 166 * FIFO is empty. It will also keep firing if the FIFO was empty 167 * at any point in the past until it has been acknowledged at the 168 * mailbox level. By acknowledging it here we can ensure that we will 169 * only get the interrupt once the FIFO has been cleared again. 170 * If the FIFO is already empty before the ack it will fire again 171 * immediately after the ack. 172 */ 173 if (apple_mbox->hw->has_irq_controls) { 174 writel_relaxed(apple_mbox->hw->irq_bit_send_empty, 175 apple_mbox->regs + apple_mbox->hw->irq_ack); 176 } 177 enable_irq(apple_mbox->irq_send_empty); 178 179 return 0; 180 } 181 182 static irqreturn_t apple_mbox_send_empty_irq(int irq, void *data) 183 { 184 struct apple_mbox *apple_mbox = data; 185 186 /* 187 * We don't need to acknowledge the interrupt at the mailbox level 188 * here even if supported by the hardware. It will keep firing but that 189 * doesn't matter since it's disabled at the main interrupt controller. 190 * apple_mbox_chan_send_data will acknowledge it before enabling 191 * it at the main controller again. 192 */ 193 disable_irq_nosync(apple_mbox->irq_send_empty); 194 mbox_chan_txdone(&apple_mbox->chan, 0); 195 return IRQ_HANDLED; 196 } 197 198 static irqreturn_t apple_mbox_recv_irq(int irq, void *data) 199 { 200 struct apple_mbox *apple_mbox = data; 201 struct apple_mbox_msg msg; 202 203 while (apple_mbox_hw_recv(apple_mbox, &msg) == 0) 204 mbox_chan_received_data(&apple_mbox->chan, (void *)&msg); 205 206 /* 207 * The interrupt will keep firing even if there are no more messages 208 * unless we also acknowledge it at the mailbox level here. 209 * There's no race if a message comes in between the check in the while 210 * loop above and the ack below: If a new messages arrives inbetween 211 * those two the interrupt will just fire again immediately after the 212 * ack since it's level triggered. 213 */ 214 if (apple_mbox->hw->has_irq_controls) { 215 writel_relaxed(apple_mbox->hw->irq_bit_recv_not_empty, 216 apple_mbox->regs + apple_mbox->hw->irq_ack); 217 } 218 219 return IRQ_HANDLED; 220 } 221 222 static int apple_mbox_chan_startup(struct mbox_chan *chan) 223 { 224 struct apple_mbox *apple_mbox = chan->con_priv; 225 226 /* 227 * Only some variants of this mailbox HW provide interrupt control 228 * at the mailbox level. We therefore need to handle enabling/disabling 229 * interrupts at the main interrupt controller anyway for hardware that 230 * doesn't. Just always keep the interrupts we care about enabled at 231 * the mailbox level so that both hardware revisions behave almost 232 * the same. 233 */ 234 if (apple_mbox->hw->has_irq_controls) { 235 writel_relaxed(apple_mbox->hw->irq_bit_recv_not_empty | 236 apple_mbox->hw->irq_bit_send_empty, 237 apple_mbox->regs + apple_mbox->hw->irq_enable); 238 } 239 240 enable_irq(apple_mbox->irq_recv_not_empty); 241 return 0; 242 } 243 244 static void apple_mbox_chan_shutdown(struct mbox_chan *chan) 245 { 246 struct apple_mbox *apple_mbox = chan->con_priv; 247 248 disable_irq(apple_mbox->irq_recv_not_empty); 249 } 250 251 static const struct mbox_chan_ops apple_mbox_ops = { 252 .send_data = apple_mbox_chan_send_data, 253 .startup = apple_mbox_chan_startup, 254 .shutdown = apple_mbox_chan_shutdown, 255 }; 256 257 static struct mbox_chan *apple_mbox_of_xlate(struct mbox_controller *mbox, 258 const struct of_phandle_args *args) 259 { 260 if (args->args_count != 0) 261 return ERR_PTR(-EINVAL); 262 263 return &mbox->chans[0]; 264 } 265 266 static int apple_mbox_probe(struct platform_device *pdev) 267 { 268 int ret; 269 const struct of_device_id *match; 270 char *irqname; 271 struct apple_mbox *mbox; 272 struct device *dev = &pdev->dev; 273 274 match = of_match_node(apple_mbox_of_match, pdev->dev.of_node); 275 if (!match) 276 return -EINVAL; 277 if (!match->data) 278 return -EINVAL; 279 280 mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL); 281 if (!mbox) 282 return -ENOMEM; 283 platform_set_drvdata(pdev, mbox); 284 285 mbox->dev = dev; 286 mbox->regs = devm_platform_ioremap_resource(pdev, 0); 287 if (IS_ERR(mbox->regs)) 288 return PTR_ERR(mbox->regs); 289 290 mbox->hw = match->data; 291 mbox->irq_recv_not_empty = 292 platform_get_irq_byname(pdev, "recv-not-empty"); 293 if (mbox->irq_recv_not_empty < 0) 294 return -ENODEV; 295 296 mbox->irq_send_empty = platform_get_irq_byname(pdev, "send-empty"); 297 if (mbox->irq_send_empty < 0) 298 return -ENODEV; 299 300 mbox->controller.dev = mbox->dev; 301 mbox->controller.num_chans = 1; 302 mbox->controller.chans = &mbox->chan; 303 mbox->controller.ops = &apple_mbox_ops; 304 mbox->controller.txdone_irq = true; 305 mbox->controller.of_xlate = apple_mbox_of_xlate; 306 mbox->chan.con_priv = mbox; 307 308 irqname = devm_kasprintf(dev, GFP_KERNEL, "%s-recv", dev_name(dev)); 309 if (!irqname) 310 return -ENOMEM; 311 312 ret = devm_request_threaded_irq(dev, mbox->irq_recv_not_empty, NULL, 313 apple_mbox_recv_irq, 314 IRQF_NO_AUTOEN | IRQF_ONESHOT, irqname, 315 mbox); 316 if (ret) 317 return ret; 318 319 irqname = devm_kasprintf(dev, GFP_KERNEL, "%s-send", dev_name(dev)); 320 if (!irqname) 321 return -ENOMEM; 322 323 ret = devm_request_irq(dev, mbox->irq_send_empty, 324 apple_mbox_send_empty_irq, IRQF_NO_AUTOEN, 325 irqname, mbox); 326 if (ret) 327 return ret; 328 329 return devm_mbox_controller_register(dev, &mbox->controller); 330 } 331 332 static const struct apple_mbox_hw apple_mbox_asc_hw = { 333 .control_full = APPLE_ASC_MBOX_CONTROL_FULL, 334 .control_empty = APPLE_ASC_MBOX_CONTROL_EMPTY, 335 336 .a2i_control = APPLE_ASC_MBOX_A2I_CONTROL, 337 .a2i_send0 = APPLE_ASC_MBOX_A2I_SEND0, 338 .a2i_send1 = APPLE_ASC_MBOX_A2I_SEND1, 339 340 .i2a_control = APPLE_ASC_MBOX_I2A_CONTROL, 341 .i2a_recv0 = APPLE_ASC_MBOX_I2A_RECV0, 342 .i2a_recv1 = APPLE_ASC_MBOX_I2A_RECV1, 343 344 .has_irq_controls = false, 345 }; 346 347 static const struct apple_mbox_hw apple_mbox_m3_hw = { 348 .control_full = APPLE_M3_MBOX_CONTROL_FULL, 349 .control_empty = APPLE_M3_MBOX_CONTROL_EMPTY, 350 351 .a2i_control = APPLE_M3_MBOX_A2I_CONTROL, 352 .a2i_send0 = APPLE_M3_MBOX_A2I_SEND0, 353 .a2i_send1 = APPLE_M3_MBOX_A2I_SEND1, 354 355 .i2a_control = APPLE_M3_MBOX_I2A_CONTROL, 356 .i2a_recv0 = APPLE_M3_MBOX_I2A_RECV0, 357 .i2a_recv1 = APPLE_M3_MBOX_I2A_RECV1, 358 359 .has_irq_controls = true, 360 .irq_enable = APPLE_M3_MBOX_IRQ_ENABLE, 361 .irq_ack = APPLE_M3_MBOX_IRQ_ACK, 362 .irq_bit_recv_not_empty = APPLE_M3_MBOX_IRQ_I2A_NOT_EMPTY, 363 .irq_bit_send_empty = APPLE_M3_MBOX_IRQ_A2I_EMPTY, 364 }; 365 366 static const struct of_device_id apple_mbox_of_match[] = { 367 { .compatible = "apple,t8103-asc-mailbox", .data = &apple_mbox_asc_hw }, 368 { .compatible = "apple,t8103-m3-mailbox", .data = &apple_mbox_m3_hw }, 369 {} 370 }; 371 MODULE_DEVICE_TABLE(of, apple_mbox_of_match); 372 373 static struct platform_driver apple_mbox_driver = { 374 .driver = { 375 .name = "apple-mailbox", 376 .of_match_table = apple_mbox_of_match, 377 }, 378 .probe = apple_mbox_probe, 379 }; 380 module_platform_driver(apple_mbox_driver); 381 382 MODULE_LICENSE("Dual MIT/GPL"); 383 MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>"); 384 MODULE_DESCRIPTION("Apple Mailbox driver"); 385