1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig MAILBOX 3 bool "Mailbox Hardware Support" 4 help 5 Mailbox is a framework to control hardware communication between 6 on-chip processors through queued messages and interrupt driven 7 signals. Say Y if your platform supports hardware mailboxes. 8 9if MAILBOX 10 11config ARM_MHU 12 tristate "ARM MHU Mailbox" 13 depends on ARM_AMBA 14 help 15 Say Y here if you want to build the ARM MHU controller driver. 16 The controller has 3 mailbox channels, the last of which can be 17 used in Secure mode only. 18 19config IMX_MBOX 20 tristate "i.MX Mailbox" 21 depends on ARCH_MXC || COMPILE_TEST 22 help 23 Mailbox implementation for i.MX Messaging Unit (MU). 24 25config PLATFORM_MHU 26 tristate "Platform MHU Mailbox" 27 depends on OF 28 depends on HAS_IOMEM 29 help 30 Say Y here if you want to build a platform specific variant MHU 31 controller driver. 32 The controller has a maximum of 3 mailbox channels, the last of 33 which can be used in Secure mode only. 34 35config PL320_MBOX 36 bool "ARM PL320 Mailbox" 37 depends on ARM_AMBA 38 help 39 An implementation of the ARM PL320 Interprocessor Communication 40 Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to 41 send short messages between Highbank's A9 cores and the EnergyCore 42 Management Engine, primarily for cpufreq. Say Y here if you want 43 to use the PL320 IPCM support. 44 45config ARMADA_37XX_RWTM_MBOX 46 tristate "Armada 37xx rWTM BIU Mailbox" 47 depends on ARCH_MVEBU || COMPILE_TEST 48 depends on OF 49 help 50 Mailbox implementation for communication with the the firmware 51 running on the Cortex-M3 rWTM secure processor of the Armada 37xx 52 SOC. Say Y here if you are building for such a device (for example 53 the Turris Mox router). 54 55config OMAP2PLUS_MBOX 56 tristate "OMAP2+ Mailbox framework support" 57 depends on ARCH_OMAP2PLUS 58 help 59 Mailbox implementation for OMAP family chips with hardware for 60 interprocessor communication involving DSP, IVA1.0 and IVA2 in 61 OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you 62 want to use OMAP2+ Mailbox framework support. 63 64config OMAP_MBOX_KFIFO_SIZE 65 int "Mailbox kfifo default buffer size (bytes)" 66 depends on OMAP2PLUS_MBOX 67 default 256 68 help 69 Specify the default size of mailbox's kfifo buffers (bytes). 70 This can also be changed at runtime (via the mbox_kfifo_size 71 module parameter). 72 73config ROCKCHIP_MBOX 74 bool "Rockchip Soc Intergrated Mailbox Support" 75 depends on ARCH_ROCKCHIP || COMPILE_TEST 76 help 77 This driver provides support for inter-processor communication 78 between CPU cores and MCU processor on Some Rockchip SOCs. 79 Please check it that the Soc you use have Mailbox hardware. 80 Say Y here if you want to use the Rockchip Mailbox support. 81 82config PCC 83 bool "Platform Communication Channel Driver" 84 depends on ACPI 85 default n 86 help 87 ACPI 5.0+ spec defines a generic mode of communication 88 between the OS and a platform such as the BMC. This medium 89 (PCC) is typically used by CPPC (ACPI CPU Performance management), 90 RAS (ACPI reliability protocol) and MPST (ACPI Memory power 91 states). Select this driver if your platform implements the 92 PCC clients mentioned above. 93 94config ALTERA_MBOX 95 tristate "Altera Mailbox" 96 depends on HAS_IOMEM 97 help 98 An implementation of the Altera Mailbox soft core. It is used 99 to send message between processors. Say Y here if you want to use the 100 Altera mailbox support. 101 102config BCM2835_MBOX 103 tristate "BCM2835 Mailbox" 104 depends on ARCH_BCM2835 105 help 106 An implementation of the BCM2385 Mailbox. It is used to invoke 107 the services of the Videocore. Say Y here if you want to use the 108 BCM2835 Mailbox. 109 110config STI_MBOX 111 tristate "STI Mailbox framework support" 112 depends on ARCH_STI && OF 113 help 114 Mailbox implementation for STMicroelectonics family chips with 115 hardware for interprocessor communication. 116 117config TI_MESSAGE_MANAGER 118 tristate "Texas Instruments Message Manager Driver" 119 depends on ARCH_KEYSTONE || ARCH_K3 120 help 121 An implementation of Message Manager slave driver for Keystone 122 and K3 architecture SoCs from Texas Instruments. Message Manager 123 is a communication entity found on few of Texas Instrument's keystone 124 and K3 architecture SoCs. These may be used for communication between 125 multiple processors within the SoC. Select this driver if your 126 platform has support for the hardware block. 127 128config HI3660_MBOX 129 tristate "Hi3660 Mailbox" if EXPERT 130 depends on (ARCH_HISI || COMPILE_TEST) 131 depends on OF 132 default ARCH_HISI 133 help 134 An implementation of the hi3660 mailbox. It is used to send message 135 between application processors and other processors/MCU/DSP. Select 136 Y here if you want to use Hi3660 mailbox controller. 137 138config HI6220_MBOX 139 tristate "Hi6220 Mailbox" if EXPERT 140 depends on (ARCH_HISI || COMPILE_TEST) 141 depends on OF 142 default ARCH_HISI 143 help 144 An implementation of the hi6220 mailbox. It is used to send message 145 between application processors and MCU. Say Y here if you want to 146 build Hi6220 mailbox controller driver. 147 148config MAILBOX_TEST 149 tristate "Mailbox Test Client" 150 depends on OF 151 depends on HAS_IOMEM 152 help 153 Test client to help with testing new Controller driver 154 implementations. 155 156config QCOM_APCS_IPC 157 tristate "Qualcomm APCS IPC driver" 158 depends on ARCH_QCOM || COMPILE_TEST 159 help 160 Say y here to enable support for the APCS IPC mailbox driver, 161 providing an interface for invoking the inter-process communication 162 signals from the application processor to other masters. 163 164config TEGRA_HSP_MBOX 165 bool "Tegra HSP (Hardware Synchronization Primitives) Driver" 166 depends on ARCH_TEGRA 167 help 168 The Tegra HSP driver is used for the interprocessor communication 169 between different remote processors and host processors on Tegra186 170 and later SoCs. Say Y here if you want to have this support. 171 If unsure say N. 172 173config XGENE_SLIMPRO_MBOX 174 tristate "APM SoC X-Gene SLIMpro Mailbox Controller" 175 depends on ARCH_XGENE 176 help 177 An implementation of the APM X-Gene Interprocessor Communication 178 Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller. 179 It is used to send short messages between ARM64-bit cores and 180 the SLIMpro Management Engine, primarily for PM. Say Y here if you 181 want to use the APM X-Gene SLIMpro IPCM support. 182 183config BCM_PDC_MBOX 184 tristate "Broadcom FlexSparx DMA Mailbox" 185 depends on ARCH_BCM_IPROC || COMPILE_TEST 186 help 187 Mailbox implementation for the Broadcom FlexSparx DMA ring manager, 188 which provides access to various offload engines on Broadcom 189 SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2. 190 191config BCM_FLEXRM_MBOX 192 tristate "Broadcom FlexRM Mailbox" 193 depends on ARM64 194 depends on ARCH_BCM_IPROC || COMPILE_TEST 195 select GENERIC_MSI_IRQ_DOMAIN 196 default m if ARCH_BCM_IPROC 197 help 198 Mailbox implementation of the Broadcom FlexRM ring manager, 199 which provides access to various offload engines on Broadcom 200 SoCs. Say Y here if you want to use the Broadcom FlexRM. 201 202config STM32_IPCC 203 tristate "STM32 IPCC Mailbox" 204 depends on MACH_STM32MP157 205 help 206 Mailbox implementation for STMicroelectonics STM32 family chips 207 with hardware for Inter-Processor Communication Controller (IPCC) 208 between processors. Say Y here if you want to have this support. 209 210config MTK_CMDQ_MBOX 211 tristate "MediaTek CMDQ Mailbox Support" 212 depends on ARCH_MEDIATEK || COMPILE_TEST 213 select MTK_INFRACFG 214 help 215 Say yes here to add support for the MediaTek Command Queue (CMDQ) 216 mailbox driver. The CMDQ is used to help read/write registers with 217 critical time limitation, such as updating display configuration 218 during the vblank. 219 220config ZYNQMP_IPI_MBOX 221 bool "Xilinx ZynqMP IPI Mailbox" 222 depends on ARCH_ZYNQMP && OF 223 help 224 Say yes here to add support for Xilinx IPI mailbox driver. 225 This mailbox driver is used to send notification or short message 226 between processors with Xilinx ZynqMP IPI. It will place the 227 message to the IPI buffer and will access the IPI control 228 registers to kick the other processor or enquire status. 229 230endif 231