1menuconfig MAILBOX 2 bool "Mailbox Hardware Support" 3 help 4 Mailbox is a framework to control hardware communication between 5 on-chip processors through queued messages and interrupt driven 6 signals. Say Y if your platform supports hardware mailboxes. 7 8if MAILBOX 9 10config ARM_MHU 11 tristate "ARM MHU Mailbox" 12 depends on ARM_AMBA 13 help 14 Say Y here if you want to build the ARM MHU controller driver. 15 The controller has 3 mailbox channels, the last of which can be 16 used in Secure mode only. 17 18config IMX_MBOX 19 tristate "i.MX Mailbox" 20 depends on ARCH_MXC || COMPILE_TEST 21 help 22 Mailbox implementation for i.MX Messaging Unit (MU). 23 24config PLATFORM_MHU 25 tristate "Platform MHU Mailbox" 26 depends on OF 27 depends on HAS_IOMEM 28 help 29 Say Y here if you want to build a platform specific variant MHU 30 controller driver. 31 The controller has a maximum of 3 mailbox channels, the last of 32 which can be used in Secure mode only. 33 34config PL320_MBOX 35 bool "ARM PL320 Mailbox" 36 depends on ARM_AMBA 37 help 38 An implementation of the ARM PL320 Interprocessor Communication 39 Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to 40 send short messages between Highbank's A9 cores and the EnergyCore 41 Management Engine, primarily for cpufreq. Say Y here if you want 42 to use the PL320 IPCM support. 43 44config OMAP2PLUS_MBOX 45 tristate "OMAP2+ Mailbox framework support" 46 depends on ARCH_OMAP2PLUS 47 help 48 Mailbox implementation for OMAP family chips with hardware for 49 interprocessor communication involving DSP, IVA1.0 and IVA2 in 50 OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you 51 want to use OMAP2+ Mailbox framework support. 52 53config OMAP_MBOX_KFIFO_SIZE 54 int "Mailbox kfifo default buffer size (bytes)" 55 depends on OMAP2PLUS_MBOX 56 default 256 57 help 58 Specify the default size of mailbox's kfifo buffers (bytes). 59 This can also be changed at runtime (via the mbox_kfifo_size 60 module parameter). 61 62config ROCKCHIP_MBOX 63 bool "Rockchip Soc Intergrated Mailbox Support" 64 depends on ARCH_ROCKCHIP || COMPILE_TEST 65 help 66 This driver provides support for inter-processor communication 67 between CPU cores and MCU processor on Some Rockchip SOCs. 68 Please check it that the Soc you use have Mailbox hardware. 69 Say Y here if you want to use the Rockchip Mailbox support. 70 71config PCC 72 bool "Platform Communication Channel Driver" 73 depends on ACPI 74 default n 75 help 76 ACPI 5.0+ spec defines a generic mode of communication 77 between the OS and a platform such as the BMC. This medium 78 (PCC) is typically used by CPPC (ACPI CPU Performance management), 79 RAS (ACPI reliability protocol) and MPST (ACPI Memory power 80 states). Select this driver if your platform implements the 81 PCC clients mentioned above. 82 83config ALTERA_MBOX 84 tristate "Altera Mailbox" 85 depends on HAS_IOMEM 86 help 87 An implementation of the Altera Mailbox soft core. It is used 88 to send message between processors. Say Y here if you want to use the 89 Altera mailbox support. 90 91config BCM2835_MBOX 92 tristate "BCM2835 Mailbox" 93 depends on ARCH_BCM2835 94 help 95 An implementation of the BCM2385 Mailbox. It is used to invoke 96 the services of the Videocore. Say Y here if you want to use the 97 BCM2835 Mailbox. 98 99config STI_MBOX 100 tristate "STI Mailbox framework support" 101 depends on ARCH_STI && OF 102 help 103 Mailbox implementation for STMicroelectonics family chips with 104 hardware for interprocessor communication. 105 106config TI_MESSAGE_MANAGER 107 tristate "Texas Instruments Message Manager Driver" 108 depends on ARCH_KEYSTONE 109 help 110 An implementation of Message Manager slave driver for Keystone 111 architecture SoCs from Texas Instruments. Message Manager is a 112 communication entity found on few of Texas Instrument's keystone 113 architecture SoCs. These may be used for communication between 114 multiple processors within the SoC. Select this driver if your 115 platform has support for the hardware block. 116 117config HI3660_MBOX 118 tristate "Hi3660 Mailbox" if EXPERT 119 depends on (ARCH_HISI || COMPILE_TEST) 120 depends on OF 121 default ARCH_HISI 122 help 123 An implementation of the hi3660 mailbox. It is used to send message 124 between application processors and other processors/MCU/DSP. Select 125 Y here if you want to use Hi3660 mailbox controller. 126 127config HI6220_MBOX 128 tristate "Hi6220 Mailbox" if EXPERT 129 depends on (ARCH_HISI || COMPILE_TEST) 130 depends on OF 131 default ARCH_HISI 132 help 133 An implementation of the hi6220 mailbox. It is used to send message 134 between application processors and MCU. Say Y here if you want to 135 build Hi6220 mailbox controller driver. 136 137config MAILBOX_TEST 138 tristate "Mailbox Test Client" 139 depends on OF 140 depends on HAS_IOMEM 141 help 142 Test client to help with testing new Controller driver 143 implementations. 144 145config QCOM_APCS_IPC 146 tristate "Qualcomm APCS IPC driver" 147 depends on ARCH_QCOM || COMPILE_TEST 148 help 149 Say y here to enable support for the APCS IPC mailbox driver, 150 providing an interface for invoking the inter-process communication 151 signals from the application processor to other masters. 152 153config TEGRA_HSP_MBOX 154 bool "Tegra HSP (Hardware Synchronization Primitives) Driver" 155 depends on ARCH_TEGRA 156 help 157 The Tegra HSP driver is used for the interprocessor communication 158 between different remote processors and host processors on Tegra186 159 and later SoCs. Say Y here if you want to have this support. 160 If unsure say N. 161 162config XGENE_SLIMPRO_MBOX 163 tristate "APM SoC X-Gene SLIMpro Mailbox Controller" 164 depends on ARCH_XGENE 165 help 166 An implementation of the APM X-Gene Interprocessor Communication 167 Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller. 168 It is used to send short messages between ARM64-bit cores and 169 the SLIMpro Management Engine, primarily for PM. Say Y here if you 170 want to use the APM X-Gene SLIMpro IPCM support. 171 172config BCM_PDC_MBOX 173 tristate "Broadcom FlexSparx DMA Mailbox" 174 depends on ARCH_BCM_IPROC || COMPILE_TEST 175 help 176 Mailbox implementation for the Broadcom FlexSparx DMA ring manager, 177 which provides access to various offload engines on Broadcom 178 SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2. 179 180config BCM_FLEXRM_MBOX 181 tristate "Broadcom FlexRM Mailbox" 182 depends on ARM64 183 depends on ARCH_BCM_IPROC || COMPILE_TEST 184 select GENERIC_MSI_IRQ_DOMAIN 185 default m if ARCH_BCM_IPROC 186 help 187 Mailbox implementation of the Broadcom FlexRM ring manager, 188 which provides access to various offload engines on Broadcom 189 SoCs. Say Y here if you want to use the Broadcom FlexRM. 190 191config STM32_IPCC 192 tristate "STM32 IPCC Mailbox" 193 depends on MACH_STM32MP157 194 help 195 Mailbox implementation for STMicroelectonics STM32 family chips 196 with hardware for Inter-Processor Communication Controller (IPCC) 197 between processors. Say Y here if you want to have this support. 198 199config MTK_CMDQ_MBOX 200 tristate "MediaTek CMDQ Mailbox Support" 201 depends on ARCH_MEDIATEK || COMPILE_TEST 202 select MTK_INFRACFG 203 help 204 Say yes here to add support for the MediaTek Command Queue (CMDQ) 205 mailbox driver. The CMDQ is used to help read/write registers with 206 critical time limitation, such as updating display configuration 207 during the vblank. 208endif 209