1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig MAILBOX 3 bool "Mailbox Hardware Support" 4 help 5 Mailbox is a framework to control hardware communication between 6 on-chip processors through queued messages and interrupt driven 7 signals. Say Y if your platform supports hardware mailboxes. 8 9if MAILBOX 10 11config ARM_MHU 12 tristate "ARM MHU Mailbox" 13 depends on ARM_AMBA 14 help 15 Say Y here if you want to build the ARM MHU controller driver. 16 The controller has 3 mailbox channels, the last of which can be 17 used in Secure mode only. 18 19config ARM_MHU_V2 20 tristate "ARM MHUv2 Mailbox" 21 depends on ARM_AMBA 22 help 23 Say Y here if you want to build the ARM MHUv2 controller driver, 24 which provides unidirectional mailboxes between processing elements. 25 26config IMX_MBOX 27 tristate "i.MX Mailbox" 28 depends on ARCH_MXC || COMPILE_TEST 29 help 30 Mailbox implementation for i.MX Messaging Unit (MU). 31 32config PLATFORM_MHU 33 tristate "Platform MHU Mailbox" 34 depends on OF 35 depends on HAS_IOMEM 36 help 37 Say Y here if you want to build a platform specific variant MHU 38 controller driver. 39 The controller has a maximum of 3 mailbox channels, the last of 40 which can be used in Secure mode only. 41 42config PL320_MBOX 43 bool "ARM PL320 Mailbox" 44 depends on ARM_AMBA 45 help 46 An implementation of the ARM PL320 Interprocessor Communication 47 Mailbox (IPCM), tailored for the Calxeda Highbank. It is used to 48 send short messages between Highbank's A9 cores and the EnergyCore 49 Management Engine, primarily for cpufreq. Say Y here if you want 50 to use the PL320 IPCM support. 51 52config ARMADA_37XX_RWTM_MBOX 53 tristate "Armada 37xx rWTM BIU Mailbox" 54 depends on ARCH_MVEBU || COMPILE_TEST 55 depends on OF 56 help 57 Mailbox implementation for communication with the the firmware 58 running on the Cortex-M3 rWTM secure processor of the Armada 37xx 59 SOC. Say Y here if you are building for such a device (for example 60 the Turris Mox router). 61 62config OMAP2PLUS_MBOX 63 tristate "OMAP2+ Mailbox framework support" 64 depends on ARCH_OMAP2PLUS || ARCH_K3 65 help 66 Mailbox implementation for OMAP family chips with hardware for 67 interprocessor communication involving DSP, IVA1.0 and IVA2 in 68 OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you 69 want to use OMAP2+ Mailbox framework support. 70 71config OMAP_MBOX_KFIFO_SIZE 72 int "Mailbox kfifo default buffer size (bytes)" 73 depends on OMAP2PLUS_MBOX 74 default 256 75 help 76 Specify the default size of mailbox's kfifo buffers (bytes). 77 This can also be changed at runtime (via the mbox_kfifo_size 78 module parameter). 79 80config ROCKCHIP_MBOX 81 bool "Rockchip Soc Integrated Mailbox Support" 82 depends on ARCH_ROCKCHIP || COMPILE_TEST 83 help 84 This driver provides support for inter-processor communication 85 between CPU cores and MCU processor on Some Rockchip SOCs. 86 Please check it that the Soc you use have Mailbox hardware. 87 Say Y here if you want to use the Rockchip Mailbox support. 88 89config PCC 90 bool "Platform Communication Channel Driver" 91 depends on ACPI 92 default n 93 help 94 ACPI 5.0+ spec defines a generic mode of communication 95 between the OS and a platform such as the BMC. This medium 96 (PCC) is typically used by CPPC (ACPI CPU Performance management), 97 RAS (ACPI reliability protocol) and MPST (ACPI Memory power 98 states). Select this driver if your platform implements the 99 PCC clients mentioned above. 100 101config ALTERA_MBOX 102 tristate "Altera Mailbox" 103 depends on HAS_IOMEM 104 help 105 An implementation of the Altera Mailbox soft core. It is used 106 to send message between processors. Say Y here if you want to use the 107 Altera mailbox support. 108 109config BCM2835_MBOX 110 tristate "BCM2835 Mailbox" 111 depends on ARCH_BCM2835 112 help 113 An implementation of the BCM2385 Mailbox. It is used to invoke 114 the services of the Videocore. Say Y here if you want to use the 115 BCM2835 Mailbox. 116 117config STI_MBOX 118 tristate "STI Mailbox framework support" 119 depends on ARCH_STI && OF 120 help 121 Mailbox implementation for STMicroelectonics family chips with 122 hardware for interprocessor communication. 123 124config TI_MESSAGE_MANAGER 125 tristate "Texas Instruments Message Manager Driver" 126 depends on ARCH_KEYSTONE || ARCH_K3 127 help 128 An implementation of Message Manager slave driver for Keystone 129 and K3 architecture SoCs from Texas Instruments. Message Manager 130 is a communication entity found on few of Texas Instrument's keystone 131 and K3 architecture SoCs. These may be used for communication between 132 multiple processors within the SoC. Select this driver if your 133 platform has support for the hardware block. 134 135config HI3660_MBOX 136 tristate "Hi3660 Mailbox" if EXPERT 137 depends on (ARCH_HISI || COMPILE_TEST) 138 depends on OF 139 default ARCH_HISI 140 help 141 An implementation of the hi3660 mailbox. It is used to send message 142 between application processors and other processors/MCU/DSP. Select 143 Y here if you want to use Hi3660 mailbox controller. 144 145config HI6220_MBOX 146 tristate "Hi6220 Mailbox" if EXPERT 147 depends on (ARCH_HISI || COMPILE_TEST) 148 depends on OF 149 default ARCH_HISI 150 help 151 An implementation of the hi6220 mailbox. It is used to send message 152 between application processors and MCU. Say Y here if you want to 153 build Hi6220 mailbox controller driver. 154 155config MAILBOX_TEST 156 tristate "Mailbox Test Client" 157 depends on OF 158 depends on HAS_IOMEM 159 help 160 Test client to help with testing new Controller driver 161 implementations. 162 163config POLARFIRE_SOC_MAILBOX 164 tristate "PolarFire SoC (MPFS) Mailbox" 165 depends on HAS_IOMEM 166 depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST 167 help 168 This driver adds support for the PolarFire SoC (MPFS) mailbox controller. 169 170 To compile this driver as a module, choose M here. the 171 module will be called mailbox-mpfs. 172 173 If unsure, say N. 174 175config QCOM_APCS_IPC 176 tristate "Qualcomm APCS IPC driver" 177 depends on ARCH_QCOM || COMPILE_TEST 178 help 179 Say y here to enable support for the APCS IPC mailbox driver, 180 providing an interface for invoking the inter-process communication 181 signals from the application processor to other masters. 182 183config TEGRA_HSP_MBOX 184 bool "Tegra HSP (Hardware Synchronization Primitives) Driver" 185 depends on ARCH_TEGRA 186 help 187 The Tegra HSP driver is used for the interprocessor communication 188 between different remote processors and host processors on Tegra186 189 and later SoCs. Say Y here if you want to have this support. 190 If unsure say N. 191 192config XGENE_SLIMPRO_MBOX 193 tristate "APM SoC X-Gene SLIMpro Mailbox Controller" 194 depends on ARCH_XGENE 195 help 196 An implementation of the APM X-Gene Interprocessor Communication 197 Mailbox (IPCM) between the ARM 64-bit cores and SLIMpro controller. 198 It is used to send short messages between ARM64-bit cores and 199 the SLIMpro Management Engine, primarily for PM. Say Y here if you 200 want to use the APM X-Gene SLIMpro IPCM support. 201 202config BCM_PDC_MBOX 203 tristate "Broadcom FlexSparx DMA Mailbox" 204 depends on ARCH_BCM_IPROC || COMPILE_TEST 205 help 206 Mailbox implementation for the Broadcom FlexSparx DMA ring manager, 207 which provides access to various offload engines on Broadcom 208 SoCs, including FA2/FA+ on Northstar Plus and PDC on Northstar 2. 209 210config BCM_FLEXRM_MBOX 211 tristate "Broadcom FlexRM Mailbox" 212 depends on ARM64 213 depends on ARCH_BCM_IPROC || COMPILE_TEST 214 select GENERIC_MSI_IRQ_DOMAIN 215 default m if ARCH_BCM_IPROC 216 help 217 Mailbox implementation of the Broadcom FlexRM ring manager, 218 which provides access to various offload engines on Broadcom 219 SoCs. Say Y here if you want to use the Broadcom FlexRM. 220 221config STM32_IPCC 222 tristate "STM32 IPCC Mailbox" 223 depends on MACH_STM32MP157 || COMPILE_TEST 224 help 225 Mailbox implementation for STMicroelectonics STM32 family chips 226 with hardware for Inter-Processor Communication Controller (IPCC) 227 between processors. Say Y here if you want to have this support. 228 229config MTK_CMDQ_MBOX 230 tristate "MediaTek CMDQ Mailbox Support" 231 depends on ARCH_MEDIATEK || COMPILE_TEST 232 select MTK_INFRACFG 233 help 234 Say yes here to add support for the MediaTek Command Queue (CMDQ) 235 mailbox driver. The CMDQ is used to help read/write registers with 236 critical time limitation, such as updating display configuration 237 during the vblank. 238 239config ZYNQMP_IPI_MBOX 240 bool "Xilinx ZynqMP IPI Mailbox" 241 depends on ARCH_ZYNQMP && OF 242 help 243 Say yes here to add support for Xilinx IPI mailbox driver. 244 This mailbox driver is used to send notification or short message 245 between processors with Xilinx ZynqMP IPI. It will place the 246 message to the IPI buffer and will access the IPI control 247 registers to kick the other processor or enquire status. 248 249config SUN6I_MSGBOX 250 tristate "Allwinner sun6i/sun8i/sun9i/sun50i Message Box" 251 depends on ARCH_SUNXI || COMPILE_TEST 252 default ARCH_SUNXI 253 help 254 Mailbox implementation for the hardware message box present in 255 various Allwinner SoCs. This mailbox is used for communication 256 between the application CPUs and the power management coprocessor. 257 258config SPRD_MBOX 259 tristate "Spreadtrum Mailbox" 260 depends on ARCH_SPRD || COMPILE_TEST 261 help 262 Mailbox driver implementation for the Spreadtrum platform. It is used 263 to send message between application processors and MCU. Say Y here if 264 you want to build the Spreatrum mailbox controller driver. 265 266config QCOM_IPCC 267 tristate "Qualcomm Technologies, Inc. IPCC driver" 268 depends on ARCH_QCOM || COMPILE_TEST 269 help 270 Qualcomm Technologies, Inc. Inter-Processor Communication Controller 271 (IPCC) driver for MSM devices. The driver provides mailbox support for 272 sending interrupts to the clients. On the other hand, the driver also 273 acts as an interrupt controller for receiving interrupts from clients. 274 Say Y here if you want to build this driver. 275 276endif 277