1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_MACIISI 34 bool "Include Mac IIsi ADB driver" 35 depends on ADB && MAC && BROKEN 36 help 37 Say Y here if want your kernel to support Macintosh systems that use 38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 39 II, LC, LC II, LC III, Performa 460, and the Performa 600. 40 41config ADB_IOP 42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 43 depends on ADB && MAC 44 help 45 The I/O Processor (IOP) is an Apple custom IC designed to provide 46 intelligent support for I/O controllers. It is described at 47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 48 support for it, say 'Y' here. 49 50config ADB_PMU68K 51 bool "Include PMU (Powerbook) ADB driver" 52 depends on ADB && MAC 53 help 54 Say Y here if want your kernel to support the m68k based Powerbooks. 55 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 60 61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 62config ADB_CUDA 63 bool "Support for CUDA based Macs and PowerMacs" 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 65 help 66 This provides support for CUDA based Macintosh and Power Macintosh 67 systems. This includes many m68k based Macs (Color Classic, Mac TV, 68 Performa 475, Performa 520, Performa 550, Performa 575, 69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 73 even if your machine doesn't have a CUDA. 74 75 If unsure say Y. 76 77config ADB_PMU 78 bool "Support for PMU based PowerMacs" 79 depends on PPC_PMAC 80 help 81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 82 PMU is an embedded microprocessor whose primary function is to 83 control system power, and battery charging on the portable models. 84 The PMU also controls the ADB (Apple Desktop Bus) which connects to 85 the keyboard and mouse on some machines, as well as the non-volatile 86 RAM and the RTC (real time clock) chip. Say Y to enable support for 87 this device; you should do so if your machine is one of those 88 mentioned above. 89 90config ADB_PMU_LED 91 bool "Support for the Power/iBook front LED" 92 depends on ADB_PMU 93 select NEW_LEDS 94 select LEDS_CLASS 95 help 96 Support the front LED on Power/iBooks as a generic LED that can 97 be triggered by any of the supported triggers. To get the 98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 99 and the ide-disk LED trigger and configure appropriately through 100 sysfs. 101 102config ADB_PMU_LED_IDE 103 bool "Use front LED as IDE LED by default" 104 depends on ADB_PMU_LED 105 depends on LEDS_CLASS 106 depends on IDE_GD_ATA 107 select LEDS_TRIGGERS 108 select LEDS_TRIGGER_IDE_DISK 109 help 110 This option makes the front LED default to the IDE trigger 111 so that it blinks on IDE activity. 112 113config PMAC_SMU 114 bool "Support for SMU based PowerMacs" 115 depends on PPC_PMAC64 116 help 117 This option adds support for the newer G5 iMacs and PowerMacs based 118 on the "SMU" system control chip which replaces the old PMU. 119 If you don't know, say Y. 120 121config PMAC_APM_EMU 122 tristate "APM emulation" 123 select APM_EMULATION 124 depends on ADB_PMU && PM && PPC32 125 126config PMAC_MEDIABAY 127 bool "Support PowerBook hotswap media bay" 128 depends on PPC_PMAC && PPC32 && BLOCK 129 help 130 This option adds support for older PowerBook's hotswap media bay 131 that can contains batteries, floppy drives, or IDE devices. PCI 132 devices are not fully supported in the bay as I never had one to 133 try with 134 135config PMAC_BACKLIGHT 136 bool "Backlight control for LCD screens" 137 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 138 select FB_BACKLIGHT 139 help 140 Say Y here to enable Macintosh specific extensions of the generic 141 backlight code. With this enabled, the brightness keys on older 142 PowerBooks will be enabled so you can change the screen brightness. 143 Newer models should use a userspace daemon like pbbuttonsd. 144 145config PMAC_BACKLIGHT_LEGACY 146 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 147 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 148 help 149 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 150 programs which use this old interface. New and updated programs 151 should use the backlight classes in sysfs. 152 153config ADB_MACIO 154 bool "Include MacIO (CHRP) ADB driver" 155 depends on ADB && PPC_CHRP && !PPC_PMAC64 156 help 157 Say Y here to include direct support for the ADB controller in the 158 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 159 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 160 OpenPIC controller and two RS422/Geoports.) 161 162config INPUT_ADBHID 163 bool "Support for ADB input devices (keyboard, mice, ...)" 164 depends on ADB && INPUT=y 165 help 166 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 167 such as keyboards, mice, joysticks, trackpads or graphic tablets 168 handled by the input layer. If you say Y here, make sure to say Y to 169 the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and 170 "Event interface support" (CONFIG_INPUT_EVDEV) as well. 171 172 If unsure, say Y. 173 174config MAC_EMUMOUSEBTN 175 tristate "Support for mouse button 2+3 emulation" 176 depends on SYSCTL && INPUT 177 help 178 This provides generic support for emulating the 2nd and 3rd mouse 179 button with keypresses. If you say Y here, the emulation is still 180 disabled by default. The emulation is controlled by these sysctl 181 entries: 182 /proc/sys/dev/mac_hid/mouse_button_emulation 183 /proc/sys/dev/mac_hid/mouse_button2_keycode 184 /proc/sys/dev/mac_hid/mouse_button3_keycode 185 186 If you have an Apple machine with a 1-button mouse, say Y here. 187 188 To compile this driver as a module, choose M here: the 189 module will be called mac_hid. 190 191config THERM_WINDTUNNEL 192 tristate "Support for thermal management on Windtunnel G4s" 193 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 194 help 195 This driver provides some thermostat and fan control for the desktop 196 G4 "Windtunnel" 197 198config THERM_ADT746X 199 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 200 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 201 help 202 This driver provides some thermostat and fan control for the 203 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 204 better fan behaviour by default, and some manual control. 205 206config WINDFARM 207 tristate "New PowerMac thermal control infrastructure" 208 depends on PPC 209 210config WINDFARM_PM81 211 tristate "Support for thermal management on iMac G5" 212 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 213 select I2C_POWERMAC 214 help 215 This driver provides thermal control for the iMacG5 216 217config WINDFARM_PM72 218 tristate "Support for thermal management on PowerMac G5 (AGP)" 219 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 220 select I2C_POWERMAC 221 help 222 This driver provides thermal control for the PowerMac G5 223 "AGP" variants (PowerMac 7,2 and 7,3) 224 225config WINDFARM_RM31 226 tristate "Support for thermal management on Xserve G5" 227 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 228 select I2C_POWERMAC 229 help 230 This driver provides thermal control for the Xserve G5 231 (RackMac3,1) 232 233config WINDFARM_PM91 234 tristate "Support for thermal management on PowerMac9,1" 235 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 236 select I2C_POWERMAC 237 help 238 This driver provides thermal control for the PowerMac9,1 239 which is the recent (SMU based) single CPU desktop G5 240 241config WINDFARM_PM112 242 tristate "Support for thermal management on PowerMac11,2" 243 depends on WINDFARM && I2C && PMAC_SMU 244 select I2C_POWERMAC 245 help 246 This driver provides thermal control for the PowerMac11,2 247 which are the recent dual and quad G5 machines using the 248 970MP dual-core processor. 249 250config WINDFARM_PM121 251 tristate "Support for thermal management on PowerMac12,1" 252 depends on WINDFARM && I2C && PMAC_SMU 253 select I2C_POWERMAC 254 help 255 This driver provides thermal control for the PowerMac12,1 256 which is the iMac G5 (iSight). 257 258config ANSLCD 259 tristate "Support for ANS LCD display" 260 depends on ADB_CUDA && PPC_PMAC 261 262config PMAC_RACKMETER 263 tristate "Support for Apple XServe front panel LEDs" 264 depends on PPC_PMAC 265 help 266 This driver provides some support to control the front panel 267 blue LEDs "vu-meter" of the XServer macs. 268 269config SENSORS_AMS 270 tristate "Apple Motion Sensor driver" 271 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) 272 select INPUT_POLLDEV 273 help 274 Support for the motion sensor included in PowerBooks. Includes 275 implementations for PMU and I2C. 276 277 This driver can also be built as a module. If so, the module 278 will be called ams. 279 280config SENSORS_AMS_PMU 281 bool "PMU variant" 282 depends on SENSORS_AMS && ADB_PMU 283 default y 284 help 285 PMU variant of motion sensor, found in late 2005 PowerBooks. 286 287config SENSORS_AMS_I2C 288 bool "I2C variant" 289 depends on SENSORS_AMS && I2C 290 default y 291 help 292 I2C variant of motion sensor, found in early 2005 PowerBooks and 293 iBooks. 294 295endif # MACINTOSH_DRIVERS 296