1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_IOP 34 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 35 depends on ADB && MAC 36 help 37 The I/O Processor (IOP) is an Apple custom IC designed to provide 38 intelligent support for I/O controllers. It is described at 39 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 40 support for it, say 'Y' here. 41 42# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 43config ADB_CUDA 44 bool "Support for Cuda/Egret based Macs and PowerMacs" 45 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 46 help 47 This provides support for Cuda/Egret based Macintosh and 48 Power Macintosh systems. This includes most m68k based Macs, 49 most Old World PowerMacs, the first generation iMacs, the 50 Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later 51 models should use CONFIG_ADB_PMU instead. It is safe to say Y 52 here even if your machine doesn't have a Cuda or Egret device. 53 54 If unsure say Y. 55 56config ADB_PMU 57 bool "Support for PMU based PowerMacs and PowerBooks" 58 depends on PPC_PMAC || MAC 59 help 60 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 61 PMU is an embedded microprocessor whose primary function is to 62 control system power, and battery charging on the portable models. 63 The PMU also controls the ADB (Apple Desktop Bus) which connects to 64 the keyboard and mouse on some machines, as well as the non-volatile 65 RAM and the RTC (real time clock) chip. Say Y to enable support for 66 this device; you should do so if your machine is one of those 67 mentioned above. 68 69config ADB_PMU_LED 70 bool "Support for the Power/iBook front LED" 71 depends on PPC_PMAC && ADB_PMU 72 select NEW_LEDS 73 select LEDS_CLASS 74 help 75 Support the front LED on Power/iBooks as a generic LED that can 76 be triggered by any of the supported triggers. To get the 77 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 78 and the disk LED trigger and configure appropriately through sysfs. 79 80config ADB_PMU_LED_DISK 81 bool "Use front LED as DISK LED by default" 82 depends on ADB_PMU_LED 83 depends on LEDS_CLASS 84 select LEDS_TRIGGERS 85 select LEDS_TRIGGER_DISK 86 help 87 This option makes the front LED default to the disk trigger 88 so that it blinks on disk activity. 89 90config PMAC_SMU 91 bool "Support for SMU based PowerMacs" 92 depends on PPC_PMAC64 93 help 94 This option adds support for the newer G5 iMacs and PowerMacs based 95 on the "SMU" system control chip which replaces the old PMU. 96 If you don't know, say Y. 97 98config PMAC_APM_EMU 99 tristate "APM emulation" 100 select APM_EMULATION 101 depends on ADB_PMU && PM && PPC32 102 103config PMAC_MEDIABAY 104 bool "Support PowerBook hotswap media bay" 105 depends on PPC_PMAC && PPC32 && BLOCK 106 help 107 This option adds support for older PowerBook's hotswap media bay 108 that can contains batteries, floppy drives, or IDE devices. PCI 109 devices are not fully supported in the bay as I never had one to 110 try with 111 112config PMAC_BACKLIGHT 113 bool "Backlight control for LCD screens" 114 depends on PPC_PMAC && ADB_PMU && FB = y && (BROKEN || !PPC64) 115 select FB_BACKLIGHT 116 help 117 Say Y here to enable Macintosh specific extensions of the generic 118 backlight code. With this enabled, the brightness keys on older 119 PowerBooks will be enabled so you can change the screen brightness. 120 Newer models should use a userspace daemon like pbbuttonsd. 121 122config PMAC_BACKLIGHT_LEGACY 123 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 124 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 125 help 126 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 127 programs which use this old interface. New and updated programs 128 should use the backlight classes in sysfs. 129 130config ADB_MACIO 131 bool "Include MacIO (CHRP) ADB driver" 132 depends on ADB && PPC_CHRP && !PPC_PMAC64 133 help 134 Say Y here to include direct support for the ADB controller in the 135 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 136 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 137 OpenPIC controller and two RS422/Geoports.) 138 139config INPUT_ADBHID 140 bool "Support for ADB input devices (keyboard, mice, ...)" 141 depends on ADB && INPUT=y 142 help 143 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 144 such as keyboards, mice, joysticks, trackpads or graphic tablets 145 handled by the input layer. If you say Y here, make sure to say Y to 146 the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and 147 "Event interface support" (CONFIG_INPUT_EVDEV) as well. 148 149 If unsure, say Y. 150 151config MAC_EMUMOUSEBTN 152 tristate "Support for mouse button 2+3 emulation" 153 depends on SYSCTL && INPUT 154 help 155 This provides generic support for emulating the 2nd and 3rd mouse 156 button with keypresses. If you say Y here, the emulation is still 157 disabled by default. The emulation is controlled by these sysctl 158 entries: 159 /proc/sys/dev/mac_hid/mouse_button_emulation 160 /proc/sys/dev/mac_hid/mouse_button2_keycode 161 /proc/sys/dev/mac_hid/mouse_button3_keycode 162 163 If you have an Apple machine with a 1-button mouse, say Y here. 164 165 To compile this driver as a module, choose M here: the 166 module will be called mac_hid. 167 168config THERM_WINDTUNNEL 169 tristate "Support for thermal management on Windtunnel G4s" 170 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 171 help 172 This driver provides some thermostat and fan control for the desktop 173 G4 "Windtunnel" 174 175config THERM_ADT746X 176 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 177 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 178 help 179 This driver provides some thermostat and fan control for the 180 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 181 better fan behaviour by default, and some manual control. 182 183config WINDFARM 184 tristate "New PowerMac thermal control infrastructure" 185 depends on PPC 186 187config WINDFARM_PM81 188 tristate "Support for thermal management on iMac G5" 189 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 190 select I2C_POWERMAC 191 help 192 This driver provides thermal control for the iMacG5 193 194config WINDFARM_PM72 195 tristate "Support for thermal management on PowerMac G5 (AGP)" 196 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 197 select I2C_POWERMAC 198 help 199 This driver provides thermal control for the PowerMac G5 200 "AGP" variants (PowerMac 7,2 and 7,3) 201 202config WINDFARM_RM31 203 tristate "Support for thermal management on Xserve G5" 204 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 205 select I2C_POWERMAC 206 help 207 This driver provides thermal control for the Xserve G5 208 (RackMac3,1) 209 210config WINDFARM_PM91 211 tristate "Support for thermal management on PowerMac9,1" 212 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 213 select I2C_POWERMAC 214 help 215 This driver provides thermal control for the PowerMac9,1 216 which is the recent (SMU based) single CPU desktop G5 217 218config WINDFARM_PM112 219 tristate "Support for thermal management on PowerMac11,2" 220 depends on WINDFARM && I2C && PMAC_SMU 221 select I2C_POWERMAC 222 help 223 This driver provides thermal control for the PowerMac11,2 224 which are the recent dual and quad G5 machines using the 225 970MP dual-core processor. 226 227config WINDFARM_PM121 228 tristate "Support for thermal management on PowerMac12,1" 229 depends on WINDFARM && I2C && PMAC_SMU 230 select I2C_POWERMAC 231 help 232 This driver provides thermal control for the PowerMac12,1 233 which is the iMac G5 (iSight). 234 235config ANSLCD 236 tristate "Support for ANS LCD display" 237 depends on ADB_CUDA && PPC_PMAC 238 239config PMAC_RACKMETER 240 tristate "Support for Apple XServe front panel LEDs" 241 depends on PPC_PMAC 242 help 243 This driver provides some support to control the front panel 244 blue LEDs "vu-meter" of the XServer macs. 245 246config SENSORS_AMS 247 tristate "Apple Motion Sensor driver" 248 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) 249 select INPUT_POLLDEV 250 help 251 Support for the motion sensor included in PowerBooks. Includes 252 implementations for PMU and I2C. 253 254 This driver can also be built as a module. If so, the module 255 will be called ams. 256 257config SENSORS_AMS_PMU 258 bool "PMU variant" 259 depends on SENSORS_AMS && ADB_PMU 260 default y 261 help 262 PMU variant of motion sensor, found in late 2005 PowerBooks. 263 264config SENSORS_AMS_I2C 265 bool "I2C variant" 266 depends on SENSORS_AMS && I2C 267 default y 268 help 269 I2C variant of motion sensor, found in early 2005 PowerBooks and 270 iBooks. 271 272endif # MACINTOSH_DRIVERS 273