1 2menu "Macintosh device drivers" 3 depends on PPC || MAC 4 5config ADB 6 bool "Apple Desktop Bus (ADB) support" 7 depends on MAC || (PPC_PMAC && PPC32) 8 help 9 Apple Desktop Bus (ADB) support is for support of devices which 10 are connected to an ADB port. ADB devices tend to have 4 pins. 11 If you have an Apple Macintosh prior to the iMac, an iBook or 12 PowerBook, or a "Blue and White G3", you probably want to say Y 13 here. Otherwise say N. 14 15config ADB_MACII 16 bool "Include Mac II ADB driver" 17 depends on ADB && MAC 18 help 19 Say Y here if want your kernel to support Macintosh systems that use 20 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 21 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 22 Centris 650. 23 24config ADB_MACIISI 25 bool "Include Mac IIsi ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 30 II, LC, LC II, LC III, Performa 460, and the Performa 600. 31 32config ADB_IOP 33 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 34 depends on ADB && MAC 35 help 36 The I/O Processor (IOP) is an Apple custom IC designed to provide 37 intelligent support for I/O controllers. It is described at 38 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 39 support for it, say 'Y' here. 40 41config ADB_PMU68K 42 bool "Include PMU (Powerbook) ADB driver" 43 depends on ADB && MAC 44 help 45 Say Y here if want your kernel to support the m68k based Powerbooks. 46 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 47 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 48 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 49 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 50 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 51 52# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 53config ADB_CUDA 54 bool "Support for CUDA based Macs and PowerMacs" 55 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 56 help 57 This provides support for CUDA based Macintosh and Power Macintosh 58 systems. This includes many m68k based Macs (Color Classic, Mac TV, 59 Performa 475, Performa 520, Performa 550, Performa 575, 60 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 61 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 62 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 63 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 64 even if your machine doesn't have a CUDA. 65 66 If unsure say Y. 67 68config ADB_PMU 69 bool "Support for PMU based PowerMacs" 70 depends on PPC_PMAC 71 help 72 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 73 PMU is an embedded microprocessor whose primary function is to 74 control system power, and battery charging on the portable models. 75 The PMU also controls the ADB (Apple Desktop Bus) which connects to 76 the keyboard and mouse on some machines, as well as the non-volatile 77 RAM and the RTC (real time clock) chip. Say Y to enable support for 78 this device; you should do so if your machine is one of those 79 mentioned above. 80 81config ADB_PMU_LED 82 bool "Support for the Power/iBook front LED" 83 depends on ADB_PMU 84 select NEW_LEDS 85 select LEDS_CLASS 86 help 87 Support the front LED on Power/iBooks as a generic LED that can 88 be triggered by any of the supported triggers. To get the 89 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 90 and the ide-disk LED trigger and configure appropriately through 91 sysfs. 92 93config ADB_PMU_LED_IDE 94 bool "Use front LED as IDE LED by default" 95 depends on ADB_PMU_LED 96 select LEDS_TRIGGERS 97 select LEDS_TRIGGER_IDE_DISK 98 help 99 This option makes the front LED default to the IDE trigger 100 so that it blinks on IDE activity. 101 102config PMAC_SMU 103 bool "Support for SMU based PowerMacs" 104 depends on PPC_PMAC64 105 help 106 This option adds support for the newer G5 iMacs and PowerMacs based 107 on the "SMU" system control chip which replaces the old PMU. 108 If you don't know, say Y. 109 110config PMAC_APM_EMU 111 tristate "APM emulation" 112 depends on PPC_PMAC && PPC32 && PM 113 114config PMAC_MEDIABAY 115 bool "Support PowerBook hotswap media bay" 116 depends on PPC_PMAC && PPC32 117 help 118 This option adds support for older PowerBook's hotswap media bay 119 that can contains batteries, floppy drives, or IDE devices. PCI 120 devices are not fully supported in the bay as I never had one to 121 try with 122 123config PMAC_BACKLIGHT 124 bool "Backlight control for LCD screens" 125 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 126 select FB_BACKLIGHT 127 select BACKLIGHT_CLASS_DEVICE 128 select BACKLIGHT_LCD_SUPPORT 129 help 130 Say Y here to enable Macintosh specific extensions of the generic 131 backlight code. With this enabled, the brightness keys on older 132 PowerBooks will be enabled so you can change the screen brightness. 133 Newer models should use an userspace daemon like pbbuttonsd. 134 135config PMAC_BACKLIGHT_LEGACY 136 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 137 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 138 help 139 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 140 programs which use this old interface. New and updated programs 141 should use the backlight classes in sysfs. 142 143config ADB_MACIO 144 bool "Include MacIO (CHRP) ADB driver" 145 depends on ADB && PPC_CHRP && !PPC_PMAC64 146 help 147 Say Y here to include direct support for the ADB controller in the 148 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 149 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 150 OpenPIC controller and two RS422/Geoports.) 151 152config INPUT_ADBHID 153 bool "Support for ADB input devices (keyboard, mice, ...)" 154 depends on ADB && INPUT=y 155 help 156 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 157 such as keyboards, mice, joysticks, trackpads or graphic tablets 158 handled by the input layer. If you say Y here, make sure to say Y to 159 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 160 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 161 support" (CONFIG_INPUT_EVDEV) as well. 162 163 If unsure, say Y. 164 165config MAC_EMUMOUSEBTN 166 bool "Support for mouse button 2+3 emulation" 167 depends on INPUT_ADBHID 168 help 169 This provides generic support for emulating the 2nd and 3rd mouse 170 button with keypresses. If you say Y here, the emulation is still 171 disabled by default. The emulation is controlled by these sysctl 172 entries: 173 /proc/sys/dev/mac_hid/mouse_button_emulation 174 /proc/sys/dev/mac_hid/mouse_button2_keycode 175 /proc/sys/dev/mac_hid/mouse_button3_keycode 176 177 If you have an Apple machine with a 1-button mouse, say Y here. 178 179config THERM_WINDTUNNEL 180 tristate "Support for thermal management on Windtunnel G4s" 181 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 182 help 183 This driver provides some thermostat and fan control for the desktop 184 G4 "Windtunnel" 185 186config THERM_ADT746X 187 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 188 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 189 help 190 This driver provides some thermostat and fan control for the 191 iBook G4, and the ATI based aluminium PowerBooks, allowing slighlty 192 better fan behaviour by default, and some manual control. 193 194config THERM_PM72 195 tristate "Support for thermal management on PowerMac G5" 196 depends on I2C && I2C_POWERMAC && PPC_PMAC64 197 help 198 This driver provides thermostat and fan control for the desktop 199 G5 machines. 200 201config WINDFARM 202 tristate "New PowerMac thermal control infrastructure" 203 depends on PPC 204 205config WINDFARM_PM81 206 tristate "Support for thermal management on iMac G5" 207 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 208 select I2C_POWERMAC 209 help 210 This driver provides thermal control for the iMacG5 211 212config WINDFARM_PM91 213 tristate "Support for thermal management on PowerMac9,1" 214 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 215 select I2C_POWERMAC 216 help 217 This driver provides thermal control for the PowerMac9,1 218 which is the recent (SMU based) single CPU desktop G5 219 220config WINDFARM_PM112 221 tristate "Support for thermal management on PowerMac11,2" 222 depends on WINDFARM && I2C && PMAC_SMU 223 select I2C_POWERMAC 224 help 225 This driver provides thermal control for the PowerMac11,2 226 which are the recent dual and quad G5 machines using the 227 970MP dual-core processor. 228 229config ANSLCD 230 tristate "Support for ANS LCD display" 231 depends on ADB_CUDA && PPC_PMAC 232 233endmenu 234