1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_IOP 34 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 35 depends on ADB && MAC 36 help 37 The I/O Processor (IOP) is an Apple custom IC designed to provide 38 intelligent support for I/O controllers. It is described at 39 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 40 support for it, say 'Y' here. 41 42config ADB_PMU68K 43 bool "Include PMU (Powerbook) ADB driver" 44 depends on ADB && MAC 45 help 46 Say Y here if want your kernel to support the m68k based Powerbooks. 47 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 48 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 49 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 50 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 51 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 52 53# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 54config ADB_CUDA 55 bool "Support for Cuda/Egret based Macs and PowerMacs" 56 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 57 help 58 This provides support for Cuda/Egret based Macintosh and 59 Power Macintosh systems. This includes most m68k based Macs, 60 most Old World PowerMacs, the first generation iMacs, the 61 Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later 62 models should use CONFIG_ADB_PMU instead. It is safe to say Y 63 here even if your machine doesn't have a Cuda or Egret device. 64 65 If unsure say Y. 66 67config ADB_PMU 68 bool "Support for PMU based PowerMacs and PowerBooks" 69 depends on PPC_PMAC 70 help 71 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 72 PMU is an embedded microprocessor whose primary function is to 73 control system power, and battery charging on the portable models. 74 The PMU also controls the ADB (Apple Desktop Bus) which connects to 75 the keyboard and mouse on some machines, as well as the non-volatile 76 RAM and the RTC (real time clock) chip. Say Y to enable support for 77 this device; you should do so if your machine is one of those 78 mentioned above. 79 80config ADB_PMU_LED 81 bool "Support for the Power/iBook front LED" 82 depends on PPC_PMAC && ADB_PMU 83 select NEW_LEDS 84 select LEDS_CLASS 85 help 86 Support the front LED on Power/iBooks as a generic LED that can 87 be triggered by any of the supported triggers. To get the 88 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 89 and the disk LED trigger and configure appropriately through sysfs. 90 91config ADB_PMU_LED_DISK 92 bool "Use front LED as DISK LED by default" 93 depends on ADB_PMU_LED 94 depends on LEDS_CLASS 95 select LEDS_TRIGGERS 96 select LEDS_TRIGGER_DISK 97 help 98 This option makes the front LED default to the disk trigger 99 so that it blinks on disk activity. 100 101config PMAC_SMU 102 bool "Support for SMU based PowerMacs" 103 depends on PPC_PMAC64 104 help 105 This option adds support for the newer G5 iMacs and PowerMacs based 106 on the "SMU" system control chip which replaces the old PMU. 107 If you don't know, say Y. 108 109config PMAC_APM_EMU 110 tristate "APM emulation" 111 select APM_EMULATION 112 depends on ADB_PMU && PM && PPC32 113 114config PMAC_MEDIABAY 115 bool "Support PowerBook hotswap media bay" 116 depends on PPC_PMAC && PPC32 && BLOCK 117 help 118 This option adds support for older PowerBook's hotswap media bay 119 that can contains batteries, floppy drives, or IDE devices. PCI 120 devices are not fully supported in the bay as I never had one to 121 try with 122 123config PMAC_BACKLIGHT 124 bool "Backlight control for LCD screens" 125 depends on PPC_PMAC && ADB_PMU && FB = y && (BROKEN || !PPC64) 126 select FB_BACKLIGHT 127 help 128 Say Y here to enable Macintosh specific extensions of the generic 129 backlight code. With this enabled, the brightness keys on older 130 PowerBooks will be enabled so you can change the screen brightness. 131 Newer models should use a userspace daemon like pbbuttonsd. 132 133config PMAC_BACKLIGHT_LEGACY 134 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 135 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 136 help 137 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 138 programs which use this old interface. New and updated programs 139 should use the backlight classes in sysfs. 140 141config ADB_MACIO 142 bool "Include MacIO (CHRP) ADB driver" 143 depends on ADB && PPC_CHRP && !PPC_PMAC64 144 help 145 Say Y here to include direct support for the ADB controller in the 146 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 147 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 148 OpenPIC controller and two RS422/Geoports.) 149 150config INPUT_ADBHID 151 bool "Support for ADB input devices (keyboard, mice, ...)" 152 depends on ADB && INPUT=y 153 help 154 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 155 such as keyboards, mice, joysticks, trackpads or graphic tablets 156 handled by the input layer. If you say Y here, make sure to say Y to 157 the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and 158 "Event interface support" (CONFIG_INPUT_EVDEV) as well. 159 160 If unsure, say Y. 161 162config MAC_EMUMOUSEBTN 163 tristate "Support for mouse button 2+3 emulation" 164 depends on SYSCTL && INPUT 165 help 166 This provides generic support for emulating the 2nd and 3rd mouse 167 button with keypresses. If you say Y here, the emulation is still 168 disabled by default. The emulation is controlled by these sysctl 169 entries: 170 /proc/sys/dev/mac_hid/mouse_button_emulation 171 /proc/sys/dev/mac_hid/mouse_button2_keycode 172 /proc/sys/dev/mac_hid/mouse_button3_keycode 173 174 If you have an Apple machine with a 1-button mouse, say Y here. 175 176 To compile this driver as a module, choose M here: the 177 module will be called mac_hid. 178 179config THERM_WINDTUNNEL 180 tristate "Support for thermal management on Windtunnel G4s" 181 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 182 help 183 This driver provides some thermostat and fan control for the desktop 184 G4 "Windtunnel" 185 186config THERM_ADT746X 187 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 188 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 189 help 190 This driver provides some thermostat and fan control for the 191 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 192 better fan behaviour by default, and some manual control. 193 194config WINDFARM 195 tristate "New PowerMac thermal control infrastructure" 196 depends on PPC 197 198config WINDFARM_PM81 199 tristate "Support for thermal management on iMac G5" 200 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 201 select I2C_POWERMAC 202 help 203 This driver provides thermal control for the iMacG5 204 205config WINDFARM_PM72 206 tristate "Support for thermal management on PowerMac G5 (AGP)" 207 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 208 select I2C_POWERMAC 209 help 210 This driver provides thermal control for the PowerMac G5 211 "AGP" variants (PowerMac 7,2 and 7,3) 212 213config WINDFARM_RM31 214 tristate "Support for thermal management on Xserve G5" 215 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 216 select I2C_POWERMAC 217 help 218 This driver provides thermal control for the Xserve G5 219 (RackMac3,1) 220 221config WINDFARM_PM91 222 tristate "Support for thermal management on PowerMac9,1" 223 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 224 select I2C_POWERMAC 225 help 226 This driver provides thermal control for the PowerMac9,1 227 which is the recent (SMU based) single CPU desktop G5 228 229config WINDFARM_PM112 230 tristate "Support for thermal management on PowerMac11,2" 231 depends on WINDFARM && I2C && PMAC_SMU 232 select I2C_POWERMAC 233 help 234 This driver provides thermal control for the PowerMac11,2 235 which are the recent dual and quad G5 machines using the 236 970MP dual-core processor. 237 238config WINDFARM_PM121 239 tristate "Support for thermal management on PowerMac12,1" 240 depends on WINDFARM && I2C && PMAC_SMU 241 select I2C_POWERMAC 242 help 243 This driver provides thermal control for the PowerMac12,1 244 which is the iMac G5 (iSight). 245 246config ANSLCD 247 tristate "Support for ANS LCD display" 248 depends on ADB_CUDA && PPC_PMAC 249 250config PMAC_RACKMETER 251 tristate "Support for Apple XServe front panel LEDs" 252 depends on PPC_PMAC 253 help 254 This driver provides some support to control the front panel 255 blue LEDs "vu-meter" of the XServer macs. 256 257config SENSORS_AMS 258 tristate "Apple Motion Sensor driver" 259 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) 260 select INPUT_POLLDEV 261 help 262 Support for the motion sensor included in PowerBooks. Includes 263 implementations for PMU and I2C. 264 265 This driver can also be built as a module. If so, the module 266 will be called ams. 267 268config SENSORS_AMS_PMU 269 bool "PMU variant" 270 depends on SENSORS_AMS && ADB_PMU 271 default y 272 help 273 PMU variant of motion sensor, found in late 2005 PowerBooks. 274 275config SENSORS_AMS_I2C 276 bool "I2C variant" 277 depends on SENSORS_AMS && I2C 278 default y 279 help 280 I2C variant of motion sensor, found in early 2005 PowerBooks and 281 iBooks. 282 283endif # MACINTOSH_DRIVERS 284