1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_MACIISI 34 bool "Include Mac IIsi ADB driver" 35 depends on ADB && MAC 36 help 37 Say Y here if want your kernel to support Macintosh systems that use 38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 39 II, LC, LC II, LC III, Performa 460, and the Performa 600. 40 41config ADB_IOP 42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 43 depends on ADB && MAC 44 help 45 The I/O Processor (IOP) is an Apple custom IC designed to provide 46 intelligent support for I/O controllers. It is described at 47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 48 support for it, say 'Y' here. 49 50config ADB_PMU68K 51 bool "Include PMU (Powerbook) ADB driver" 52 depends on ADB && MAC 53 help 54 Say Y here if want your kernel to support the m68k based Powerbooks. 55 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 60 61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 62config ADB_CUDA 63 bool "Support for CUDA based Macs and PowerMacs" 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 65 help 66 This provides support for CUDA based Macintosh and Power Macintosh 67 systems. This includes many m68k based Macs (Color Classic, Mac TV, 68 Performa 475, Performa 520, Performa 550, Performa 575, 69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 73 even if your machine doesn't have a CUDA. 74 75 If unsure say Y. 76 77config ADB_PMU 78 bool "Support for PMU based PowerMacs" 79 depends on PPC_PMAC 80 help 81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 82 PMU is an embedded microprocessor whose primary function is to 83 control system power, and battery charging on the portable models. 84 The PMU also controls the ADB (Apple Desktop Bus) which connects to 85 the keyboard and mouse on some machines, as well as the non-volatile 86 RAM and the RTC (real time clock) chip. Say Y to enable support for 87 this device; you should do so if your machine is one of those 88 mentioned above. 89 90config ADB_PMU_LED 91 bool "Support for the Power/iBook front LED" 92 depends on ADB_PMU 93 select NEW_LEDS 94 select LEDS_CLASS 95 help 96 Support the front LED on Power/iBooks as a generic LED that can 97 be triggered by any of the supported triggers. To get the 98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 99 and the ide-disk LED trigger and configure appropriately through 100 sysfs. 101 102config ADB_PMU_LED_IDE 103 bool "Use front LED as IDE LED by default" 104 depends on ADB_PMU_LED 105 select LEDS_TRIGGERS 106 select LEDS_TRIGGER_IDE_DISK 107 help 108 This option makes the front LED default to the IDE trigger 109 so that it blinks on IDE activity. 110 111config PMAC_SMU 112 bool "Support for SMU based PowerMacs" 113 depends on PPC_PMAC64 114 help 115 This option adds support for the newer G5 iMacs and PowerMacs based 116 on the "SMU" system control chip which replaces the old PMU. 117 If you don't know, say Y. 118 119config PMAC_APM_EMU 120 tristate "APM emulation" 121 select APM_EMULATION 122 depends on ADB_PMU && PM && PPC32 123 124config PMAC_MEDIABAY 125 bool "Support PowerBook hotswap media bay" 126 depends on PPC_PMAC && PPC32 && BLOCK 127 help 128 This option adds support for older PowerBook's hotswap media bay 129 that can contains batteries, floppy drives, or IDE devices. PCI 130 devices are not fully supported in the bay as I never had one to 131 try with 132 133config PMAC_BACKLIGHT 134 bool "Backlight control for LCD screens" 135 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 136 select FB_BACKLIGHT 137 help 138 Say Y here to enable Macintosh specific extensions of the generic 139 backlight code. With this enabled, the brightness keys on older 140 PowerBooks will be enabled so you can change the screen brightness. 141 Newer models should use a userspace daemon like pbbuttonsd. 142 143config PMAC_BACKLIGHT_LEGACY 144 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 145 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 146 help 147 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 148 programs which use this old interface. New and updated programs 149 should use the backlight classes in sysfs. 150 151config ADB_MACIO 152 bool "Include MacIO (CHRP) ADB driver" 153 depends on ADB && PPC_CHRP && !PPC_PMAC64 154 help 155 Say Y here to include direct support for the ADB controller in the 156 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 157 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 158 OpenPIC controller and two RS422/Geoports.) 159 160config INPUT_ADBHID 161 bool "Support for ADB input devices (keyboard, mice, ...)" 162 depends on ADB && INPUT=y 163 help 164 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 165 such as keyboards, mice, joysticks, trackpads or graphic tablets 166 handled by the input layer. If you say Y here, make sure to say Y to 167 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 168 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 169 support" (CONFIG_INPUT_EVDEV) as well. 170 171 If unsure, say Y. 172 173config MAC_EMUMOUSEBTN 174 tristate "Support for mouse button 2+3 emulation" 175 depends on SYSCTL && INPUT 176 help 177 This provides generic support for emulating the 2nd and 3rd mouse 178 button with keypresses. If you say Y here, the emulation is still 179 disabled by default. The emulation is controlled by these sysctl 180 entries: 181 /proc/sys/dev/mac_hid/mouse_button_emulation 182 /proc/sys/dev/mac_hid/mouse_button2_keycode 183 /proc/sys/dev/mac_hid/mouse_button3_keycode 184 185 If you have an Apple machine with a 1-button mouse, say Y here. 186 187 To compile this driver as a module, choose M here: the 188 module will be called mac_hid. 189 190config THERM_WINDTUNNEL 191 tristate "Support for thermal management on Windtunnel G4s" 192 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 193 help 194 This driver provides some thermostat and fan control for the desktop 195 G4 "Windtunnel" 196 197config THERM_ADT746X 198 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 199 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 200 help 201 This driver provides some thermostat and fan control for the 202 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 203 better fan behaviour by default, and some manual control. 204 205config THERM_PM72 206 tristate "Support for thermal management on PowerMac G5" 207 depends on I2C && I2C_POWERMAC && PPC_PMAC64 208 help 209 This driver provides thermostat and fan control for the desktop 210 G5 machines. 211 212config WINDFARM 213 tristate "New PowerMac thermal control infrastructure" 214 depends on PPC 215 216config WINDFARM_PM81 217 tristate "Support for thermal management on iMac G5" 218 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 219 select I2C_POWERMAC 220 help 221 This driver provides thermal control for the iMacG5 222 223config WINDFARM_PM91 224 tristate "Support for thermal management on PowerMac9,1" 225 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 226 select I2C_POWERMAC 227 help 228 This driver provides thermal control for the PowerMac9,1 229 which is the recent (SMU based) single CPU desktop G5 230 231config WINDFARM_PM112 232 tristate "Support for thermal management on PowerMac11,2" 233 depends on WINDFARM && I2C && PMAC_SMU 234 select I2C_POWERMAC 235 help 236 This driver provides thermal control for the PowerMac11,2 237 which are the recent dual and quad G5 machines using the 238 970MP dual-core processor. 239 240config WINDFARM_PM121 241 tristate "Support for thermal management on PowerMac12,1" 242 depends on WINDFARM && I2C && PMAC_SMU 243 select I2C_POWERMAC 244 help 245 This driver provides thermal control for the PowerMac12,1 246 which is the iMac G5 (iSight). 247 248config ANSLCD 249 tristate "Support for ANS LCD display" 250 depends on ADB_CUDA && PPC_PMAC 251 252config PMAC_RACKMETER 253 tristate "Support for Apple XServe front panel LEDs" 254 depends on PPC_PMAC 255 help 256 This driver provides some support to control the front panel 257 blue LEDs "vu-meter" of the XServer macs. 258 259config SENSORS_AMS 260 tristate "Apple Motion Sensor driver" 261 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL 262 select INPUT_POLLDEV 263 help 264 Support for the motion sensor included in PowerBooks. Includes 265 implementations for PMU and I2C. 266 267 This driver can also be built as a module. If so, the module 268 will be called ams. 269 270config SENSORS_AMS_PMU 271 bool "PMU variant" 272 depends on SENSORS_AMS && ADB_PMU 273 default y 274 help 275 PMU variant of motion sensor, found in late 2005 PowerBooks. 276 277config SENSORS_AMS_I2C 278 bool "I2C variant" 279 depends on SENSORS_AMS && I2C 280 default y 281 help 282 I2C variant of motion sensor, found in early 2005 PowerBooks and 283 iBooks. 284 285endif # MACINTOSH_DRIVERS 286